[PATCH] blk: optimization for classic polling

[PATCH] blk: optimization for classic polling

[Nitesh Shetty]

This removes the dependency on interrupts to wake up task. Set task
state as TASK_RUNNING, if need_resched() returns true,
while polling for IO completion.
Earlier, polling task used to sleep, relying on interrupt to wake it up.
This made some IO take very long when interrupt-coalescing is enabled in
NVMe.

Reference:
http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html
Signed-off-by: Nitesh Shetty <nj.shetty at samsung.com>
---
 fs/block_dev.c | 16 ++++++++++++----
 fs/direct-io.c |  8 ++++++--
 fs/iomap.c     | 10 +++++++---
 3 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/fs/block_dev.c b/fs/block_dev.c
index 4a181fc..a87d8b7 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -236,9 +236,13 @@ __blkdev_direct_IO_simple(struct kiocb *iocb, struct iov_iter *iter,
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		if (!READ_ONCE(bio.bi_private))
 			break;
-		if (!(iocb->ki_flags & IOCB_HIPRI) ||
-		    !blk_poll(bdev_get_queue(bdev), qc))
+		if (!(iocb->ki_flags & IOCB_HIPRI))
 			io_schedule();
+		else if (!blk_poll(bdev_get_queue(bdev), qc)) {
+			if (need_resched())
+				set_current_state(TASK_RUNNING);
+			io_schedule();
+		}
 	}
 	__set_current_state(TASK_RUNNING);
 
@@ -401,9 +405,13 @@ __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter, int nr_pages)
 		if (!READ_ONCE(dio->waiter))
 			break;
 
-		if (!(iocb->ki_flags & IOCB_HIPRI) ||
-		    !blk_poll(bdev_get_queue(bdev), qc))
+		if (!(iocb->ki_flags & IOCB_HIPRI))
 			io_schedule();
+		else if (!blk_poll(bdev_get_queue(bdev), qc)) {
+			if (need_resched())
+				set_current_state(TASK_RUNNING);
+			io_schedule();
+		}
 	}
 	__set_current_state(TASK_RUNNING);
 
diff --git a/fs/direct-io.c b/fs/direct-io.c
index a0ca9e4..c815ac9 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -518,9 +518,13 @@ static struct bio *dio_await_one(struct dio *dio)
 		__set_current_state(TASK_UNINTERRUPTIBLE);
 		dio->waiter = current;
 		spin_unlock_irqrestore(&dio->bio_lock, flags);
-		if (!(dio->iocb->ki_flags & IOCB_HIPRI) ||
-		    !blk_poll(dio->bio_disk->queue, dio->bio_cookie))
+		if (!(dio->iocb->ki_flags & IOCB_HIPRI))
 			io_schedule();
+		else if (!blk_poll(dio->bio_disk->queue, dio->bio_cookie)) {
+			if (need_resched())
+				__set_current_state(TASK_RUNNING);
+			io_schedule();
+		}
 		/* wake up sets us TASK_RUNNING */
 		spin_lock_irqsave(&dio->bio_lock, flags);
 		dio->waiter = NULL;
diff --git a/fs/iomap.c b/fs/iomap.c
index afd1635..b51569d 100644
--- a/fs/iomap.c
+++ b/fs/iomap.c
@@ -1072,10 +1072,14 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 				break;
 
 			if (!(iocb->ki_flags & IOCB_HIPRI) ||
-			    !dio->submit.last_queue ||
-			    !blk_poll(dio->submit.last_queue,
-					 dio->submit.cookie))
+			    !dio->submit.last_queue)
 				io_schedule();
+			else if (!blk_poll(dio->submit.last_queue,
+					 dio->submit.cookie)) {
+				if (need_resched())
+					set_current_state(TASK_RUNNING);
+				io_schedule();
+			}
 		}
 		__set_current_state(TASK_RUNNING);
 	}
-- 
2.7.4

[PATCH] blk: optimization for classic polling

[Nitesh Shetty]

This removes the dependency on interrupts to wake up task. Set task
state as TASK_RUNNING, if need_resched() returns true,
while polling for IO completion.
Earlier, polling task used to sleep, relying on interrupt to wake it up.
This made some IO take very long when interrupt-coalescing is enabled in
NVMe.

Reference:
http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
 fs/block_dev.c | 16 ++++++++++++----
 fs/direct-io.c |  8 ++++++--
 fs/iomap.c     | 10 +++++++---
 3 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/fs/block_dev.c b/fs/block_dev.c
index 4a181fc..a87d8b7 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -236,9 +236,13 @@ __blkdev_direct_IO_simple(struct kiocb *iocb, struct iov_iter *iter,
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		if (!READ_ONCE(bio.bi_private))
 			break;
-		if (!(iocb->ki_flags & IOCB_HIPRI) ||
-		    !blk_poll(bdev_get_queue(bdev), qc))
+		if (!(iocb->ki_flags & IOCB_HIPRI))
 			io_schedule();
+		else if (!blk_poll(bdev_get_queue(bdev), qc)) {
+			if (need_resched())
+				set_current_state(TASK_RUNNING);
+			io_schedule();
+		}
 	}
 	__set_current_state(TASK_RUNNING);
 
@@ -401,9 +405,13 @@ __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter, int nr_pages)
 		if (!READ_ONCE(dio->waiter))
 			break;
 
-		if (!(iocb->ki_flags & IOCB_HIPRI) ||
-		    !blk_poll(bdev_get_queue(bdev), qc))
+		if (!(iocb->ki_flags & IOCB_HIPRI))
 			io_schedule();
+		else if (!blk_poll(bdev_get_queue(bdev), qc)) {
+			if (need_resched())
+				set_current_state(TASK_RUNNING);
+			io_schedule();
+		}
 	}
 	__set_current_state(TASK_RUNNING);
 
diff --git a/fs/direct-io.c b/fs/direct-io.c
index a0ca9e4..c815ac9 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -518,9 +518,13 @@ static struct bio *dio_await_one(struct dio *dio)
 		__set_current_state(TASK_UNINTERRUPTIBLE);
 		dio->waiter = current;
 		spin_unlock_irqrestore(&dio->bio_lock, flags);
-		if (!(dio->iocb->ki_flags & IOCB_HIPRI) ||
-		    !blk_poll(dio->bio_disk->queue, dio->bio_cookie))
+		if (!(dio->iocb->ki_flags & IOCB_HIPRI))
 			io_schedule();
+		else if (!blk_poll(dio->bio_disk->queue, dio->bio_cookie)) {
+			if (need_resched())
+				__set_current_state(TASK_RUNNING);
+			io_schedule();
+		}
 		/* wake up sets us TASK_RUNNING */
 		spin_lock_irqsave(&dio->bio_lock, flags);
 		dio->waiter = NULL;
diff --git a/fs/iomap.c b/fs/iomap.c
index afd1635..b51569d 100644
--- a/fs/iomap.c
+++ b/fs/iomap.c
@@ -1072,10 +1072,14 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 				break;
 
 			if (!(iocb->ki_flags & IOCB_HIPRI) ||
-			    !dio->submit.last_queue ||
-			    !blk_poll(dio->submit.last_queue,
-					 dio->submit.cookie))
+			    !dio->submit.last_queue)
 				io_schedule();
+			else if (!blk_poll(dio->submit.last_queue,
+					 dio->submit.cookie)) {
+				if (need_resched())
+					set_current_state(TASK_RUNNING);
+				io_schedule();
+			}
 		}
 		__set_current_state(TASK_RUNNING);
 	}
-- 
2.7.4

Re: [PATCH] blk: optimization for classic polling

[Keith Busch]

On Sun, May 30, 2083 at 09:51:06AM +0530, Nitesh Shetty wrote:
> This removes the dependency on interrupts to wake up task. Set task
> state as TASK_RUNNING, if need_resched() returns true,
> while polling for IO completion.
> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> This made some IO take very long when interrupt-coalescing is enabled in
> NVMe.
> 
> Reference:
> http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html
> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> ---
>  fs/block_dev.c | 16 ++++++++++++----
>  fs/direct-io.c |  8 ++++++--
>  fs/iomap.c     | 10 +++++++---
>  3 files changed, 25 insertions(+), 9 deletions(-)

I think it'd be simpler to have blk_poll set it back to running if
need_resched is true rather than repeat this patter across all the
callers:

---
diff --git a/block/blk-mq.c b/block/blk-mq.c
index df93102e2149..40285fe1c8ad 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -3164,6 +3164,7 @@ static bool __blk_mq_poll(struct blk_mq_hw_ctx *hctx, struct request *rq)
 		cpu_relax();
 	}
 
+	set_current_state(TASK_RUNNING);
 	return false;
 }
 
--

_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH] blk: optimization for classic polling

[Keith Busch]

On Sun, May 30, 2083@09:51:06AM +0530, Nitesh Shetty wrote:
> This removes the dependency on interrupts to wake up task. Set task
> state as TASK_RUNNING, if need_resched() returns true,
> while polling for IO completion.
> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> This made some IO take very long when interrupt-coalescing is enabled in
> NVMe.
> 
> Reference:
> http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html
> Signed-off-by: Nitesh Shetty <nj.shetty at samsung.com>
> ---
>  fs/block_dev.c | 16 ++++++++++++----
>  fs/direct-io.c |  8 ++++++--
>  fs/iomap.c     | 10 +++++++---
>  3 files changed, 25 insertions(+), 9 deletions(-)

I think it'd be simpler to have blk_poll set it back to running if
need_resched is true rather than repeat this patter across all the
callers:

---
diff --git a/block/blk-mq.c b/block/blk-mq.c
index df93102e2149..40285fe1c8ad 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -3164,6 +3164,7 @@ static bool __blk_mq_poll(struct blk_mq_hw_ctx *hctx, struct request *rq)
 		cpu_relax();
 	}
 
+	set_current_state(TASK_RUNNING);
 	return false;
 }
 
--

Re: [PATCH] blk: optimization for classic polling

[Keith Busch]

On Sun, May 30, 2083 at 09:51:06AM +0530, Nitesh Shetty wrote:
> This removes the dependency on interrupts to wake up task. Set task
> state as TASK_RUNNING, if need_resched() returns true,
> while polling for IO completion.
> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> This made some IO take very long when interrupt-coalescing is enabled in
> NVMe.
> 
> Reference:
> http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html
> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> ---
>  fs/block_dev.c | 16 ++++++++++++----
>  fs/direct-io.c |  8 ++++++--
>  fs/iomap.c     | 10 +++++++---
>  3 files changed, 25 insertions(+), 9 deletions(-)

I think it'd be simpler to have blk_poll set it back to running if
need_resched is true rather than repeat this patter across all the
callers:

---
diff --git a/block/blk-mq.c b/block/blk-mq.c
index df93102e2149..40285fe1c8ad 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -3164,6 +3164,7 @@ static bool __blk_mq_poll(struct blk_mq_hw_ctx *hctx, struct request *rq)
 		cpu_relax();
 	}
 
+	set_current_state(TASK_RUNNING);
 	return false;
 }
 
--

Re: [PATCH] blk: optimization for classic polling

[Sagi Grimberg]

> I think it'd be simpler to have blk_poll set it back to running if
> need_resched is true rather than repeat this patter across all the
> callers:
> 
> ---
> diff --git a/block/blk-mq.c b/block/blk-mq.c
> index df93102e2149..40285fe1c8ad 100644
> --- a/block/blk-mq.c
> +++ b/block/blk-mq.c
> @@ -3164,6 +3164,7 @@ static bool __blk_mq_poll(struct blk_mq_hw_ctx *hctx, struct request *rq)
>   		cpu_relax();
>   	}
>   
> +	set_current_state(TASK_RUNNING);
>   	return false;
>   }
>   
> --

Nice!

[PATCH] blk: optimization for classic polling

[Sagi Grimberg]

> I think it'd be simpler to have blk_poll set it back to running if
> need_resched is true rather than repeat this patter across all the
> callers:
> 
> ---
> diff --git a/block/blk-mq.c b/block/blk-mq.c
> index df93102e2149..40285fe1c8ad 100644
> --- a/block/blk-mq.c
> +++ b/block/blk-mq.c
> @@ -3164,6 +3164,7 @@ static bool __blk_mq_poll(struct blk_mq_hw_ctx *hctx, struct request *rq)
>   		cpu_relax();
>   	}
>   
> +	set_current_state(TASK_RUNNING);
>   	return false;
>   }
>   
> --

Nice!

Re: [PATCH] blk: optimization for classic polling

[Bart Van Assche]

On 05/29/83 20:21, Nitesh Shetty wrote:
> [ ... ]

Hello Nitesh,

Can you check the clock of the system you used to send this e-mail? In 
the header of your e-mail I found the following:

Date: Sun, 30 May 2083 09:51:06 +0530

Thanks,

Bart.

[PATCH] blk: optimization for classic polling

[Bart Van Assche]

On 05/29/83 20:21, Nitesh Shetty wrote:
> [ ... ]

Hello Nitesh,

Can you check the clock of the system you used to send this e-mail? In 
the header of your e-mail I found the following:

Date: Sun, 30 May 2083 09:51:06 +0530

Thanks,

Bart.

[PATCH v3] blk: optimization for classic polling

[Nitesh Shetty]

This removes the dependency on interrupts to wake up task. Set task
state as TASK_RUNNING, if need_resched() returns true,
while polling for IO completion.
Earlier, polling task used to sleep, relying on interrupt to wake it up.
This made some IO take very long when interrupt-coalescing is enabled in
NVMe.

Reference:
http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html

Changes since v2->v3:
	-using __set_current_state() instead of set_current_state()

Changes since v1->v2:
	-setting task state once in blk_poll, instead of multiple
callers.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
 block/blk-mq.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index df93102..3574927 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -3164,6 +3164,7 @@ static bool __blk_mq_poll(struct blk_mq_hw_ctx *hctx, struct request *rq)
 		cpu_relax();
 	}
 
+	__set_current_state(TASK_RUNNING);
 	return false;
 }
 
-- 
2.7.4

[PATCH v3] blk: optimization for classic polling

[Nitesh Shetty]

This removes the dependency on interrupts to wake up task. Set task
state as TASK_RUNNING, if need_resched() returns true,
while polling for IO completion.
Earlier, polling task used to sleep, relying on interrupt to wake it up.
This made some IO take very long when interrupt-coalescing is enabled in
NVMe.

Reference:
http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html

Changes since v2->v3:
	-using __set_current_state() instead of set_current_state()

Changes since v1->v2:
	-setting task state once in blk_poll, instead of multiple
callers.
Signed-off-by: Nitesh Shetty <nj.shetty at samsung.com>
---
 block/blk-mq.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index df93102..3574927 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -3164,6 +3164,7 @@ static bool __blk_mq_poll(struct blk_mq_hw_ctx *hctx, struct request *rq)
 		cpu_relax();
 	}
 
+	__set_current_state(TASK_RUNNING);
 	return false;
 }
 
-- 
2.7.4

Re: [PATCH v3] blk: optimization for classic polling

[Jens Axboe]

On 2/13/18 8:48 AM, Nitesh Shetty wrote:
> This removes the dependency on interrupts to wake up task. Set task
> state as TASK_RUNNING, if need_resched() returns true,
> while polling for IO completion.
> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> This made some IO take very long when interrupt-coalescing is enabled in
> NVMe.

Thanks, applied.

-- 
Jens Axboe

[PATCH v3] blk: optimization for classic polling

[Jens Axboe]

On 2/13/18 8:48 AM, Nitesh Shetty wrote:
> This removes the dependency on interrupts to wake up task. Set task
> state as TASK_RUNNING, if need_resched() returns true,
> while polling for IO completion.
> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> This made some IO take very long when interrupt-coalescing is enabled in
> NVMe.

Thanks, applied.

-- 
Jens Axboe

[PATCH v2 RESENT] blk: optimization for classic polling

[Nitesh Shetty]

This removes the dependency on interrupts to wake up task. Set task
state as TASK_RUNNING, if need_resched() returns true,
while polling for IO completion.
Earlier, polling task used to sleep, relying on interrupt to wake it up.
This made some IO take very long when interrupt-coalescing is enabled in
NVMe.

Reference:
http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html

Changes since v1:
	-setting task state once in blk_poll, instead of multiple
callers.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
 block/blk-mq.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index df93102..40285fe 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -3164,6 +3164,7 @@ static bool __blk_mq_poll(struct blk_mq_hw_ctx *hctx, struct request *rq)
 		cpu_relax();
 	}
 
+	set_current_state(TASK_RUNNING);
 	return false;
 }
 
-- 
2.7.4

[PATCH v2 RESENT] blk: optimization for classic polling

[Nitesh Shetty]

This removes the dependency on interrupts to wake up task. Set task
state as TASK_RUNNING, if need_resched() returns true,
while polling for IO completion.
Earlier, polling task used to sleep, relying on interrupt to wake it up.
This made some IO take very long when interrupt-coalescing is enabled in
NVMe.

Reference:
http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html

Changes since v1:
	-setting task state once in blk_poll, instead of multiple
callers.
Signed-off-by: Nitesh Shetty <nj.shetty at samsung.com>
---
 block/blk-mq.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index df93102..40285fe 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -3164,6 +3164,7 @@ static bool __blk_mq_poll(struct blk_mq_hw_ctx *hctx, struct request *rq)
 		cpu_relax();
 	}
 
+	set_current_state(TASK_RUNNING);
 	return false;
 }
 
-- 
2.7.4

Re: [PATCH v2 RESENT] blk: optimization for classic polling

[Jens Axboe]

On 2/13/18 11:56 AM, Nitesh Shetty wrote:
> This removes the dependency on interrupts to wake up task. Set task
> state as TASK_RUNNING, if need_resched() returns true,
> while polling for IO completion.
> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> This made some IO take very long when interrupt-coalescing is enabled in
> NVMe.

__set_current_state() should suffice here.

-- 
Jens Axboe

[PATCH v2 RESENT] blk: optimization for classic polling

[Jens Axboe]

On 2/13/18 11:56 AM, Nitesh Shetty wrote:
> This removes the dependency on interrupts to wake up task. Set task
> state as TASK_RUNNING, if need_resched() returns true,
> while polling for IO completion.
> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> This made some IO take very long when interrupt-coalescing is enabled in
> NVMe.

__set_current_state() should suffice here.

-- 
Jens Axboe

Re: [PATCH] blk: optimization for classic polling

[Peter Zijlstra]

On Sun, May 30, 2083 at 09:51:06AM +0530, Nitesh Shetty wrote:
> This removes the dependency on interrupts to wake up task. Set task
> state as TASK_RUNNING, if need_resched() returns true,
> while polling for IO completion.
> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> This made some IO take very long when interrupt-coalescing is enabled in
> NVMe.

This is a horrible Changelog.. it does not in fact explain why the patch
works or is correct.

Also, set_current_state(TASK_RUNNING) is dodgy (similarly in
__blk_mq_poll), why do you need that memory barrier?


> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> ---
>  fs/block_dev.c | 16 ++++++++++++----
>  fs/direct-io.c |  8 ++++++--
>  fs/iomap.c     | 10 +++++++---
>  3 files changed, 25 insertions(+), 9 deletions(-)
> 
> diff --git a/fs/block_dev.c b/fs/block_dev.c
> index 4a181fc..a87d8b7 100644
> --- a/fs/block_dev.c
> +++ b/fs/block_dev.c
> @@ -236,9 +236,13 @@ __blkdev_direct_IO_simple(struct kiocb *iocb, struct iov_iter *iter,
>  		set_current_state(TASK_UNINTERRUPTIBLE);
>  		if (!READ_ONCE(bio.bi_private))
>  			break;
> -		if (!(iocb->ki_flags & IOCB_HIPRI) ||
> -		    !blk_poll(bdev_get_queue(bdev), qc))
> +		if (!(iocb->ki_flags & IOCB_HIPRI))
>  			io_schedule();
> +		else if (!blk_poll(bdev_get_queue(bdev), qc)) {
> +			if (need_resched())
> +				set_current_state(TASK_RUNNING);
> +			io_schedule();
> +		}
>  	}
>  	__set_current_state(TASK_RUNNING);
>  

[PATCH] blk: optimization for classic polling

[Peter Zijlstra]

On Sun, May 30, 2083@09:51:06AM +0530, Nitesh Shetty wrote:
> This removes the dependency on interrupts to wake up task. Set task
> state as TASK_RUNNING, if need_resched() returns true,
> while polling for IO completion.
> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> This made some IO take very long when interrupt-coalescing is enabled in
> NVMe.

This is a horrible Changelog.. it does not in fact explain why the patch
works or is correct.

Also, set_current_state(TASK_RUNNING) is dodgy (similarly in
__blk_mq_poll), why do you need that memory barrier?


> Signed-off-by: Nitesh Shetty <nj.shetty at samsung.com>
> ---
>  fs/block_dev.c | 16 ++++++++++++----
>  fs/direct-io.c |  8 ++++++--
>  fs/iomap.c     | 10 +++++++---
>  3 files changed, 25 insertions(+), 9 deletions(-)
> 
> diff --git a/fs/block_dev.c b/fs/block_dev.c
> index 4a181fc..a87d8b7 100644
> --- a/fs/block_dev.c
> +++ b/fs/block_dev.c
> @@ -236,9 +236,13 @@ __blkdev_direct_IO_simple(struct kiocb *iocb, struct iov_iter *iter,
>  		set_current_state(TASK_UNINTERRUPTIBLE);
>  		if (!READ_ONCE(bio.bi_private))
>  			break;
> -		if (!(iocb->ki_flags & IOCB_HIPRI) ||
> -		    !blk_poll(bdev_get_queue(bdev), qc))
> +		if (!(iocb->ki_flags & IOCB_HIPRI))
>  			io_schedule();
> +		else if (!blk_poll(bdev_get_queue(bdev), qc)) {
> +			if (need_resched())
> +				set_current_state(TASK_RUNNING);
> +			io_schedule();
> +		}
>  	}
>  	__set_current_state(TASK_RUNNING);
>  

Re: [PATCH] blk: optimization for classic polling

[Keith Busch]

On Tue, Feb 20, 2018 at 02:21:37PM +0100, Peter Zijlstra wrote:
> Also, set_current_state(TASK_RUNNING) is dodgy (similarly in
> __blk_mq_poll), why do you need that memory barrier?

You're right. The subsequent revision that was committed removed the
barrier. The commit is here:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=67b4110f8c8d16e588d7730db8e8b01b32c1bd8b

I hope the code at least looks more reasonable. The changelog isn't much
different, though.

[PATCH] blk: optimization for classic polling

[Keith Busch]

On Tue, Feb 20, 2018@02:21:37PM +0100, Peter Zijlstra wrote:
> Also, set_current_state(TASK_RUNNING) is dodgy (similarly in
> __blk_mq_poll), why do you need that memory barrier?

You're right. The subsequent revision that was committed removed the
barrier. The commit is here:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=67b4110f8c8d16e588d7730db8e8b01b32c1bd8b

I hope the code at least looks more reasonable. The changelog isn't much
different, though.

Re: [PATCH] blk: optimization for classic polling

[Jens Axboe]

On 2/20/18 3:21 AM, Peter Zijlstra wrote:
> On Sun, May 30, 2083 at 09:51:06AM +0530, Nitesh Shetty wrote:
>> This removes the dependency on interrupts to wake up task. Set task
>> state as TASK_RUNNING, if need_resched() returns true,
>> while polling for IO completion.
>> Earlier, polling task used to sleep, relying on interrupt to wake it up.
>> This made some IO take very long when interrupt-coalescing is enabled in
>> NVMe.
> 
> This is a horrible Changelog.. it does not in fact explain why the patch
> works or is correct.

Yeah, that should have been improved.

> Also, set_current_state(TASK_RUNNING) is dodgy (similarly in
> __blk_mq_poll), why do you need that memory barrier?

I pointed that out in the review, and v2 fixed it. v2 is the
one that got merged.

-- 
Jens Axboe

[PATCH] blk: optimization for classic polling

[Jens Axboe]

On 2/20/18 3:21 AM, Peter Zijlstra wrote:
> On Sun, May 30, 2083@09:51:06AM +0530, Nitesh Shetty wrote:
>> This removes the dependency on interrupts to wake up task. Set task
>> state as TASK_RUNNING, if need_resched() returns true,
>> while polling for IO completion.
>> Earlier, polling task used to sleep, relying on interrupt to wake it up.
>> This made some IO take very long when interrupt-coalescing is enabled in
>> NVMe.
> 
> This is a horrible Changelog.. it does not in fact explain why the patch
> works or is correct.

Yeah, that should have been improved.

> Also, set_current_state(TASK_RUNNING) is dodgy (similarly in
> __blk_mq_poll), why do you need that memory barrier?

I pointed that out in the review, and v2 fixed it. v2 is the
one that got merged.

-- 
Jens Axboe

Re: [PATCH] blk: optimization for classic polling

[Peter Zijlstra]

On Tue, Feb 20, 2018 at 12:37:07PM -1000, Jens Axboe wrote:
> On 2/20/18 3:21 AM, Peter Zijlstra wrote:
> > On Sun, May 30, 2083 at 09:51:06AM +0530, Nitesh Shetty wrote:
> >> This removes the dependency on interrupts to wake up task. Set task
> >> state as TASK_RUNNING, if need_resched() returns true,
> >> while polling for IO completion.
> >> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> >> This made some IO take very long when interrupt-coalescing is enabled in
> >> NVMe.
> > 
> > This is a horrible Changelog.. it does not in fact explain why the patch
> > works or is correct.
> 
> Yeah, that should have been improved.

Being ever more forgetful (I blame the kids) I find Changelogs more and
more important, ymmv ;-)

> > Also, set_current_state(TASK_RUNNING) is dodgy (similarly in
> > __blk_mq_poll), why do you need that memory barrier?
> 
> I pointed that out in the review, and v2 fixed it. v2 is the
> one that got merged.

Right missed that. In fact, possibly the only reason I saw this is that
Nitesh had this computer configured wrong and the email is from the
future and thus the very first entry in my lkml folder.

[PATCH] blk: optimization for classic polling

[Peter Zijlstra]

On Tue, Feb 20, 2018@12:37:07PM -1000, Jens Axboe wrote:
> On 2/20/18 3:21 AM, Peter Zijlstra wrote:
> > On Sun, May 30, 2083@09:51:06AM +0530, Nitesh Shetty wrote:
> >> This removes the dependency on interrupts to wake up task. Set task
> >> state as TASK_RUNNING, if need_resched() returns true,
> >> while polling for IO completion.
> >> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> >> This made some IO take very long when interrupt-coalescing is enabled in
> >> NVMe.
> > 
> > This is a horrible Changelog.. it does not in fact explain why the patch
> > works or is correct.
> 
> Yeah, that should have been improved.

Being ever more forgetful (I blame the kids) I find Changelogs more and
more important, ymmv ;-)

> > Also, set_current_state(TASK_RUNNING) is dodgy (similarly in
> > __blk_mq_poll), why do you need that memory barrier?
> 
> I pointed that out in the review, and v2 fixed it. v2 is the
> one that got merged.

Right missed that. In fact, possibly the only reason I saw this is that
Nitesh had this computer configured wrong and the email is from the
future and thus the very first entry in my lkml folder.

Re: [PATCH] blk: optimization for classic polling

[Florian Fainelli]

On 05/29/2083 08:21 PM, Nitesh Shetty wrote:
> This removes the dependency on interrupts to wake up task. Set task
> state as TASK_RUNNING, if need_resched() returns true,
> while polling for IO completion.
> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> This made some IO take very long when interrupt-coalescing is enabled in
> NVMe.
> 
> Reference:
> http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html
> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>

There is something seriously wrong with the date on your computer, this
patch is dated from May 29th 2083,... I would not be surprised if it
messed up people's email client and you did not get any response because
of that...
-- 
Florian

[PATCH] blk: optimization for classic polling

[Florian Fainelli]

On 05/29/2083 08:21 PM, Nitesh Shetty wrote:
> This removes the dependency on interrupts to wake up task. Set task
> state as TASK_RUNNING, if need_resched() returns true,
> while polling for IO completion.
> Earlier, polling task used to sleep, relying on interrupt to wake it up.
> This made some IO take very long when interrupt-coalescing is enabled in
> NVMe.
> 
> Reference:
> http://lists.infradead.org/pipermail/linux-nvme/2018-February/015435.html
> Signed-off-by: Nitesh Shetty <nj.shetty at samsung.com>

There is something seriously wrong with the date on your computer, this
patch is dated from May 29th 2083,... I would not be surprised if it
messed up people's email client and you did not get any response because
of that...
-- 
Florian