[PATCH v5 0/8] R-Car DU: Convert LVDS code to bridge driver

[PATCH v5 0/8] R-Car DU: Convert LVDS code to bridge driver

[Laurent Pinchart]

Hello,

This patch series addresses a design mistake that dates back from the initial
DU support. Support for the LVDS encoders, which are IP cores separate from
the DU, was bundled in the DU driver. Worse, both the DU and LVDS were
described through a single DT node.

To fix the, patches 1/8 and 2/8 define new DT bindings for the LVDS
encoders, and deprecate their description inside the DU bindings. To retain
backward compatibility with existing DT, patches 3/8 to 7/8 then patch the
device tree at runtime to convert the legacy bindings to the new ones.

With the DT side addressed, patch 8/8 converts the LVDS support code to a
separate bridge driver.

I decided to go for live DT patching in patch 7/8 because implementing
support for both the legacy and new bindings in the driver would have been
very intrusive, and prevented further cleanups. This version relies more
heavily on overlays to avoid touching the internals of the OF core compared to
v2, even if manual fixes to the device tree are still needed.

As all the patches but the last one have been acked, I plan to send a pull
request by the end of the week if no new issue is discovered.

Compared to v4, the patch "of: changeset: Add of_changeset_node_move method"
has been dropped as it's not needed. The patches that update the DT sources to
the new DU and LVDS bindings have been dropped as well to avoid spamming the
lists as they depend on the driver changes going in first to avoid
regressions and haven't been changed.

Compared to v3, this series uses the OF changeset API to update properties
instead of accessing the internals of the property structure. This removes the
local implementation of functions to look up nodes by path and update
properties. In order to do this, I pulled in Pantelis' patch series titled
"[PATCH v2 0/5] of: dynamic: Changesets helpers & fixes" at Rob's request, and
rebased it while taking two small review comments into account.

Rob, I'd like this series to be merged in v4.17. As the changeset helpers are
now a dependency, I'd need you to merge them early (ideally on top of
v4.16-rc1) and provide a stable branch, or get your ack to merge them through
Dave's tree if they don't conflict with what you have and will queue for
v4.17.

This version also drops the small fix to the Porter board device tree that has
been queued for v4.17 already.

Compared to v2, the biggest change is in patch 7/8. Following Rob's and
Frank's reviews it was clear that modifying the unflattened DT structure of
the overlay before applying it wasn't popular. I have thus decided to use one
overlay source per SoC to move as much of the DT changes to the overlay as
possible, and only perform manual modifications (that are still needed as some
of the information is board-specific) on the system DT after applying the
overlay. As a result the overlay is parsed and applied without being modified.

Compared to v1, this series update the r8a7792 and r8a7794 device tree sources
and incorporate review feedback as described by the changelogs of individual
patches.

Laurent Pinchart (4):
  dt-bindings: display: renesas: Add R-Car LVDS encoder DT bindings
  dt-bindings: display: renesas: Deprecate LVDS support in the DU
    bindings
  drm: rcar-du: Fix legacy DT to create LVDS encoder nodes
  drm: rcar-du: Convert LVDS encoder code to bridge driver

Pantelis Antoniou (4):
  of: dynamic: Add __of_node_dupv()
  of: changesets: Introduce changeset helper methods
  of: unittest: changeset helpers
  i2c: demux: Use changeset helpers for clarity

 .../bindings/display/bridge/renesas,lvds.txt       |  56 +++
 .../devicetree/bindings/display/renesas,du.txt     |  31 +-
 MAINTAINERS                                        |   1 +
 drivers/gpu/drm/rcar-du/Kconfig                    |   6 +-
 drivers/gpu/drm/rcar-du/Makefile                   |  10 +-
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              |  21 +-
 drivers/gpu/drm/rcar-du/rcar_du_drv.h              |   5 -
 drivers/gpu/drm/rcar-du/rcar_du_encoder.c          | 175 +------
 drivers/gpu/drm/rcar-du/rcar_du_encoder.h          |  12 -
 drivers/gpu/drm/rcar-du/rcar_du_kms.c              |  14 +-
 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c          |  93 ----
 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h          |  24 -
 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c          | 238 ----------
 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h          |  64 ---
 drivers/gpu/drm/rcar-du/rcar_du_of.c               | 307 ++++++++++++
 drivers/gpu/drm/rcar-du/rcar_du_of.h               |  20 +
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts    |  79 ++++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts    |  53 +++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts    |  53 +++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts    |  53 +++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts    |  53 +++
 drivers/gpu/drm/rcar-du/rcar_lvds.c                | 524 +++++++++++++++++++++
 drivers/i2c/muxes/i2c-demux-pinctrl.c              |  12 +-
 drivers/of/dynamic.c                               | 251 +++++++++-
 drivers/of/unittest.c                              |  54 +++
 include/linux/of.h                                 | 329 +++++++++++++
 26 files changed, 1886 insertions(+), 652 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of.c
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of.h
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_lvds.c

-- 
Regards,

Laurent Pinchart

[PATCH v5 0/8] R-Car DU: Convert LVDS code to bridge driver

[Laurent Pinchart]

Hello,

This patch series addresses a design mistake that dates back from the initial
DU support. Support for the LVDS encoders, which are IP cores separate from
the DU, was bundled in the DU driver. Worse, both the DU and LVDS were
described through a single DT node.

To fix the, patches 1/8 and 2/8 define new DT bindings for the LVDS
encoders, and deprecate their description inside the DU bindings. To retain
backward compatibility with existing DT, patches 3/8 to 7/8 then patch the
device tree at runtime to convert the legacy bindings to the new ones.

With the DT side addressed, patch 8/8 converts the LVDS support code to a
separate bridge driver.

I decided to go for live DT patching in patch 7/8 because implementing
support for both the legacy and new bindings in the driver would have been
very intrusive, and prevented further cleanups. This version relies more
heavily on overlays to avoid touching the internals of the OF core compared to
v2, even if manual fixes to the device tree are still needed.

As all the patches but the last one have been acked, I plan to send a pull
request by the end of the week if no new issue is discovered.

Compared to v4, the patch "of: changeset: Add of_changeset_node_move method"
has been dropped as it's not needed. The patches that update the DT sources to
the new DU and LVDS bindings have been dropped as well to avoid spamming the
lists as they depend on the driver changes going in first to avoid
regressions and haven't been changed.

Compared to v3, this series uses the OF changeset API to update properties
instead of accessing the internals of the property structure. This removes the
local implementation of functions to look up nodes by path and update
properties. In order to do this, I pulled in Pantelis' patch series titled
"[PATCH v2 0/5] of: dynamic: Changesets helpers & fixes" at Rob's request, and
rebased it while taking two small review comments into account.

Rob, I'd like this series to be merged in v4.17. As the changeset helpers are
now a dependency, I'd need you to merge them early (ideally on top of
v4.16-rc1) and provide a stable branch, or get your ack to merge them through
Dave's tree if they don't conflict with what you have and will queue for
v4.17.

This version also drops the small fix to the Porter board device tree that has
been queued for v4.17 already.

Compared to v2, the biggest change is in patch 7/8. Following Rob's and
Frank's reviews it was clear that modifying the unflattened DT structure of
the overlay before applying it wasn't popular. I have thus decided to use one
overlay source per SoC to move as much of the DT changes to the overlay as
possible, and only perform manual modifications (that are still needed as some
of the information is board-specific) on the system DT after applying the
overlay. As a result the overlay is parsed and applied without being modified.

Compared to v1, this series update the r8a7792 and r8a7794 device tree sources
and incorporate review feedback as described by the changelogs of individual
patches.

Laurent Pinchart (4):
  dt-bindings: display: renesas: Add R-Car LVDS encoder DT bindings
  dt-bindings: display: renesas: Deprecate LVDS support in the DU
    bindings
  drm: rcar-du: Fix legacy DT to create LVDS encoder nodes
  drm: rcar-du: Convert LVDS encoder code to bridge driver

Pantelis Antoniou (4):
  of: dynamic: Add __of_node_dupv()
  of: changesets: Introduce changeset helper methods
  of: unittest: changeset helpers
  i2c: demux: Use changeset helpers for clarity

 .../bindings/display/bridge/renesas,lvds.txt       |  56 +++
 .../devicetree/bindings/display/renesas,du.txt     |  31 +-
 MAINTAINERS                                        |   1 +
 drivers/gpu/drm/rcar-du/Kconfig                    |   6 +-
 drivers/gpu/drm/rcar-du/Makefile                   |  10 +-
 drivers/gpu/drm/rcar-du/rcar_du_drv.c              |  21 +-
 drivers/gpu/drm/rcar-du/rcar_du_drv.h              |   5 -
 drivers/gpu/drm/rcar-du/rcar_du_encoder.c          | 175 +------
 drivers/gpu/drm/rcar-du/rcar_du_encoder.h          |  12 -
 drivers/gpu/drm/rcar-du/rcar_du_kms.c              |  14 +-
 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c          |  93 ----
 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h          |  24 -
 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c          | 238 ----------
 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h          |  64 ---
 drivers/gpu/drm/rcar-du/rcar_du_of.c               | 307 ++++++++++++
 drivers/gpu/drm/rcar-du/rcar_du_of.h               |  20 +
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts    |  79 ++++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts    |  53 +++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts    |  53 +++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts    |  53 +++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts    |  53 +++
 drivers/gpu/drm/rcar-du/rcar_lvds.c                | 524 +++++++++++++++++++++
 drivers/i2c/muxes/i2c-demux-pinctrl.c              |  12 +-
 drivers/of/dynamic.c                               | 251 +++++++++-
 drivers/of/unittest.c                              |  54 +++
 include/linux/of.h                                 | 329 +++++++++++++
 26 files changed, 1886 insertions(+), 652 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of.c
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of.h
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_lvds.c

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 1/8] dt-bindings: display: renesas: Add R-Car LVDS encoder DT bindings

[Laurent Pinchart]

The Renesas R-Car Gen2 and Gen3 SoCs have internal LVDS encoders. Add
corresponding device tree bindings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since v1:

- Move the SoC name before the IP name in compatible strings
- Rename parallel input to parallel RGB input
- Fixed "renesas,r8a7743-lvds" description
- Document the resets property
- Fixed typo
---
 .../bindings/display/bridge/renesas,lvds.txt       | 56 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 2 files changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
new file mode 100644
index 000000000000..2b19ce51ec07
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
@@ -0,0 +1,56 @@
+Renesas R-Car LVDS Encoder
+==========================
+
+These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
+Gen2, R-Car Gen3 and RZ/G SoCs.
+
+Required properties:
+
+- compatible : Shall contain one of
+  - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
+  - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
+  - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders
+  - "renesas,r8a7793-lvds" for R8A7791 (R-Car M2-N) compatible LVDS encoders
+  - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders
+  - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders
+
+- reg: Base address and length for the memory-mapped registers
+- clocks: A phandle + clock-specifier pair for the functional clock
+- resets: A phandle + reset specifier for the module reset
+
+Required nodes:
+
+The LVDS encoder has two video ports. Their connections are modelled using the
+OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 corresponds to the parallel RGB input
+- Video port 1 corresponds to the LVDS output
+
+Each port shall have a single endpoint.
+
+
+Example:
+
+	lvds0: lvds@feb90000 {
+		compatible = "renesas,r8a7790-lvds";
+		reg = <0 0xfeb90000 0 0x1c>;
+		clocks = <&cpg CPG_MOD 726>;
+		resets = <&cpg 726>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds0_in: endpoint {
+					remote-endpoint = <&du_out_lvds0>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds0_out: endpoint {
+				};
+			};
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 2afba909724c..13c8ec11135a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4744,6 +4744,7 @@ F:	drivers/gpu/drm/rcar-du/
 F:	drivers/gpu/drm/shmobile/
 F:	include/linux/platform_data/shmob_drm.h
 F:	Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
+F:	Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
 F:	Documentation/devicetree/bindings/display/renesas,du.txt
 
 DRM DRIVERS FOR ROCKCHIP
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 1/8] dt-bindings: display: renesas: Add R-Car LVDS encoder DT bindings

[Laurent Pinchart]

The Renesas R-Car Gen2 and Gen3 SoCs have internal LVDS encoders. Add
corresponding device tree bindings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since v1:

- Move the SoC name before the IP name in compatible strings
- Rename parallel input to parallel RGB input
- Fixed "renesas,r8a7743-lvds" description
- Document the resets property
- Fixed typo
---
 .../bindings/display/bridge/renesas,lvds.txt       | 56 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 2 files changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
new file mode 100644
index 000000000000..2b19ce51ec07
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
@@ -0,0 +1,56 @@
+Renesas R-Car LVDS Encoder
+==========================
+
+These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
+Gen2, R-Car Gen3 and RZ/G SoCs.
+
+Required properties:
+
+- compatible : Shall contain one of
+  - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
+  - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
+  - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders
+  - "renesas,r8a7793-lvds" for R8A7791 (R-Car M2-N) compatible LVDS encoders
+  - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders
+  - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders
+
+- reg: Base address and length for the memory-mapped registers
+- clocks: A phandle + clock-specifier pair for the functional clock
+- resets: A phandle + reset specifier for the module reset
+
+Required nodes:
+
+The LVDS encoder has two video ports. Their connections are modelled using the
+OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 corresponds to the parallel RGB input
+- Video port 1 corresponds to the LVDS output
+
+Each port shall have a single endpoint.
+
+
+Example:
+
+	lvds0: lvds@feb90000 {
+		compatible = "renesas,r8a7790-lvds";
+		reg = <0 0xfeb90000 0 0x1c>;
+		clocks = <&cpg CPG_MOD 726>;
+		resets = <&cpg 726>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds0_in: endpoint {
+					remote-endpoint = <&du_out_lvds0>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds0_out: endpoint {
+				};
+			};
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 2afba909724c..13c8ec11135a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4744,6 +4744,7 @@ F:	drivers/gpu/drm/rcar-du/
 F:	drivers/gpu/drm/shmobile/
 F:	include/linux/platform_data/shmob_drm.h
 F:	Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
+F:	Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
 F:	Documentation/devicetree/bindings/display/renesas,du.txt
 
 DRM DRIVERS FOR ROCKCHIP
-- 
Regards,

Laurent Pinchart

[PATCH v5 2/8] dt-bindings: display: renesas: Deprecate LVDS support in the DU bindings

[Laurent Pinchart]

The internal LVDS encoders now have their own DT bindings, representing
them as part of the DU is deprecated.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since v1:

- Remove the LVDS reg range from the example
- Remove the reg-names property
---
 .../devicetree/bindings/display/renesas,du.txt     | 31 ++++++++--------------
 1 file changed, 11 insertions(+), 20 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index cd48aba3bc8c..e79cf9b0ad38 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -14,12 +14,7 @@ Required Properties:
     - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
     - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
 
-  - reg: A list of base address and length of each memory resource, one for
-    each entry in the reg-names property.
-  - reg-names: Name of the memory resources. The DU requires one memory
-    resource for the DU core (named "du") and one memory resource for each
-    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
-    index).
+  - reg: the memory-mapped I/O registers base address and length
 
   - interrupt-parent: phandle of the parent interrupt controller.
   - interrupts: Interrupt specifiers for the DU interrupts.
@@ -29,14 +24,13 @@ Required Properties:
   - clock-names: Name of the clocks. This property is model-dependent.
     - R8A7779 uses a single functional clock. The clock doesn't need to be
       named.
-    - All other DU instances use one functional clock per channel and one
-      clock per LVDS encoder (if available). The functional clocks must be
-      named "du.x" with "x" being the channel numerical index. The LVDS clocks
-      must be named "lvds.x" with "x" being the LVDS encoder numerical index.
-    - In addition to the functional and encoder clocks, all DU versions also
-      support externally supplied pixel clocks. Those clocks are optional.
-      When supplied they must be named "dclkin.x" with "x" being the input
-      clock numerical index.
+    - All other DU instances use one functional clock per channel The
+      functional clocks must be named "du.x" with "x" being the channel
+      numerical index.
+    - In addition to the functional clocks, all DU versions also support
+      externally supplied pixel clocks. Those clocks are optional. When
+      supplied they must be named "dclkin.x" with "x" being the input clock
+      numerical index.
 
   - vsps: A list of phandle and channel index tuples to the VSPs that handle
     the memory interfaces for the DU channels. The phandle identifies the VSP
@@ -69,9 +63,7 @@ Example: R8A7795 (R-Car H3) ES2.0 DU
 
 	du: display@feb00000 {
 		compatible = "renesas,du-r8a7795";
-		reg = <0 0xfeb00000 0 0x80000>,
-		      <0 0xfeb90000 0 0x14>;
-		reg-names = "du", "lvds.0";
+		reg = <0 0xfeb00000 0 0x80000>;
 		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
@@ -79,9 +71,8 @@ Example: R8A7795 (R-Car H3) ES2.0 DU
 		clocks = <&cpg CPG_MOD 724>,
 			 <&cpg CPG_MOD 723>,
 			 <&cpg CPG_MOD 722>,
-			 <&cpg CPG_MOD 721>,
-			 <&cpg CPG_MOD 727>;
-		clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+			 <&cpg CPG_MOD 721>;
+		clock-names = "du.0", "du.1", "du.2", "du.3";
 		vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
 
 		ports {
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 2/8] dt-bindings: display: renesas: Deprecate LVDS support in the DU bindings

[Laurent Pinchart]

The internal LVDS encoders now have their own DT bindings, representing
them as part of the DU is deprecated.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since v1:

- Remove the LVDS reg range from the example
- Remove the reg-names property
---
 .../devicetree/bindings/display/renesas,du.txt     | 31 ++++++++--------------
 1 file changed, 11 insertions(+), 20 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index cd48aba3bc8c..e79cf9b0ad38 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -14,12 +14,7 @@ Required Properties:
     - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
     - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
 
-  - reg: A list of base address and length of each memory resource, one for
-    each entry in the reg-names property.
-  - reg-names: Name of the memory resources. The DU requires one memory
-    resource for the DU core (named "du") and one memory resource for each
-    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
-    index).
+  - reg: the memory-mapped I/O registers base address and length
 
   - interrupt-parent: phandle of the parent interrupt controller.
   - interrupts: Interrupt specifiers for the DU interrupts.
@@ -29,14 +24,13 @@ Required Properties:
   - clock-names: Name of the clocks. This property is model-dependent.
     - R8A7779 uses a single functional clock. The clock doesn't need to be
       named.
-    - All other DU instances use one functional clock per channel and one
-      clock per LVDS encoder (if available). The functional clocks must be
-      named "du.x" with "x" being the channel numerical index. The LVDS clocks
-      must be named "lvds.x" with "x" being the LVDS encoder numerical index.
-    - In addition to the functional and encoder clocks, all DU versions also
-      support externally supplied pixel clocks. Those clocks are optional.
-      When supplied they must be named "dclkin.x" with "x" being the input
-      clock numerical index.
+    - All other DU instances use one functional clock per channel The
+      functional clocks must be named "du.x" with "x" being the channel
+      numerical index.
+    - In addition to the functional clocks, all DU versions also support
+      externally supplied pixel clocks. Those clocks are optional. When
+      supplied they must be named "dclkin.x" with "x" being the input clock
+      numerical index.
 
   - vsps: A list of phandle and channel index tuples to the VSPs that handle
     the memory interfaces for the DU channels. The phandle identifies the VSP
@@ -69,9 +63,7 @@ Example: R8A7795 (R-Car H3) ES2.0 DU
 
 	du: display@feb00000 {
 		compatible = "renesas,du-r8a7795";
-		reg = <0 0xfeb00000 0 0x80000>,
-		      <0 0xfeb90000 0 0x14>;
-		reg-names = "du", "lvds.0";
+		reg = <0 0xfeb00000 0 0x80000>;
 		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
@@ -79,9 +71,8 @@ Example: R8A7795 (R-Car H3) ES2.0 DU
 		clocks = <&cpg CPG_MOD 724>,
 			 <&cpg CPG_MOD 723>,
 			 <&cpg CPG_MOD 722>,
-			 <&cpg CPG_MOD 721>,
-			 <&cpg CPG_MOD 727>;
-		clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+			 <&cpg CPG_MOD 721>;
+		clock-names = "du.0", "du.1", "du.2", "du.3";
 		vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
 
 		ports {
-- 
Regards,

Laurent Pinchart

[PATCH v5 3/8] of: dynamic: Add __of_node_dupv()

[Laurent Pinchart]

From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>

Add an __of_node_dupv() private method and make __of_node_dup() use it.
This is required for the subsequent changeset accessors which will
make use of it.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[Make __of_node_dupv() static]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 drivers/of/dynamic.c | 29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index 7bb33d22b4e2..a2f0c45836f9 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -382,8 +382,9 @@ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags)
 }
 
 /**
- * __of_node_dup() - Duplicate or create an empty device node dynamically.
- * @fmt: Format string (plus vargs) for new full name of the device node
+ * __of_node_dupv() - Duplicate or create an empty device node dynamically.
+ * @fmt: Format string for new full name of the device node
+ * @vargs: va_list containing the arugments for the node full name
  *
  * Create an device tree node, either by duplicating an empty node or by allocating
  * an empty one suitable for further modification.  The node data are
@@ -391,17 +392,15 @@ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags)
  * OF_DETACHED bits set. Returns the newly allocated node or NULL on out of
  * memory error.
  */
-struct device_node *__of_node_dup(const struct device_node *np, const char *fmt, ...)
+static struct device_node *__of_node_dupv(const struct device_node *np,
+		const char *fmt, va_list vargs)
 {
-	va_list vargs;
 	struct device_node *node;
 
 	node = kzalloc(sizeof(*node), GFP_KERNEL);
 	if (!node)
 		return NULL;
-	va_start(vargs, fmt);
 	node->full_name = kvasprintf(GFP_KERNEL, fmt, vargs);
-	va_end(vargs);
 	if (!node->full_name) {
 		kfree(node);
 		return NULL;
@@ -433,6 +432,24 @@ struct device_node *__of_node_dup(const struct device_node *np, const char *fmt,
 	return NULL;
 }
 
+/**
+ * __of_node_dup() - Duplicate or create an empty device node dynamically.
+ * @fmt: Format string (plus vargs) for new full name of the device node
+ *
+ * See: __of_node_dupv()
+ */
+struct device_node *__of_node_dup(const struct device_node *np,
+		const char *fmt, ...)
+{
+	va_list vargs;
+	struct device_node *node;
+
+	va_start(vargs, fmt);
+	node = __of_node_dupv(np, fmt, vargs);
+	va_end(vargs);
+	return node;
+}
+
 static void __of_changeset_entry_destroy(struct of_changeset_entry *ce)
 {
 	of_node_put(ce->np);
-- 
Regards,

Laurent Pinchart

[PATCH v5 3/8] of: dynamic: Add __of_node_dupv()

[Laurent Pinchart]

From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>

Add an __of_node_dupv() private method and make __of_node_dup() use it.
This is required for the subsequent changeset accessors which will
make use of it.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[Make __of_node_dupv() static]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 drivers/of/dynamic.c | 29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index 7bb33d22b4e2..a2f0c45836f9 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -382,8 +382,9 @@ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags)
 }
 
 /**
- * __of_node_dup() - Duplicate or create an empty device node dynamically.
- * @fmt: Format string (plus vargs) for new full name of the device node
+ * __of_node_dupv() - Duplicate or create an empty device node dynamically.
+ * @fmt: Format string for new full name of the device node
+ * @vargs: va_list containing the arugments for the node full name
  *
  * Create an device tree node, either by duplicating an empty node or by allocating
  * an empty one suitable for further modification.  The node data are
@@ -391,17 +392,15 @@ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags)
  * OF_DETACHED bits set. Returns the newly allocated node or NULL on out of
  * memory error.
  */
-struct device_node *__of_node_dup(const struct device_node *np, const char *fmt, ...)
+static struct device_node *__of_node_dupv(const struct device_node *np,
+		const char *fmt, va_list vargs)
 {
-	va_list vargs;
 	struct device_node *node;
 
 	node = kzalloc(sizeof(*node), GFP_KERNEL);
 	if (!node)
 		return NULL;
-	va_start(vargs, fmt);
 	node->full_name = kvasprintf(GFP_KERNEL, fmt, vargs);
-	va_end(vargs);
 	if (!node->full_name) {
 		kfree(node);
 		return NULL;
@@ -433,6 +432,24 @@ struct device_node *__of_node_dup(const struct device_node *np, const char *fmt,
 	return NULL;
 }
 
+/**
+ * __of_node_dup() - Duplicate or create an empty device node dynamically.
+ * @fmt: Format string (plus vargs) for new full name of the device node
+ *
+ * See: __of_node_dupv()
+ */
+struct device_node *__of_node_dup(const struct device_node *np,
+		const char *fmt, ...)
+{
+	va_list vargs;
+	struct device_node *node;
+
+	va_start(vargs, fmt);
+	node = __of_node_dupv(np, fmt, vargs);
+	va_end(vargs);
+	return node;
+}
+
 static void __of_changeset_entry_destroy(struct of_changeset_entry *ce)
 {
 	of_node_put(ce->np);
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 4/8] of: changesets: Introduce changeset helper methods

[Laurent Pinchart]

From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>

Changesets are very powerful, but the lack of a helper API
makes using them cumbersome. Introduce a simple copy based
API that makes things considerably easier.

To wit, adding a property using the raw API.

	struct property *prop;
	prop = kzalloc(sizeof(*prop)), GFP_KERNEL);
	prop->name = kstrdup("compatible");
	prop->value = kstrdup("foo,bar");
	prop->length = strlen(prop->value) + 1;
	of_changeset_add_property(ocs, np, prop);

while using the helper API

	of_changeset_add_property_string(ocs, np, "compatible",
			"foo,bar");

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[Fixed memory leak in __of_changeset_add_update_property_copy()]
[Fixed cpu to be32 conversion sparse warnings]
[Move include <linux/slab.h> to fix compilation when !CONFIG_OF_DYNAMIC]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 drivers/of/dynamic.c | 222 ++++++++++++++++++++++++++++++++++
 include/linux/of.h   | 329 +++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 551 insertions(+)

diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index a2f0c45836f9..f62083921df2 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -910,3 +910,225 @@ int of_changeset_action(struct of_changeset *ocs, unsigned long action,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(of_changeset_action);
+
+/* changeset helpers */
+
+/**
+ * of_changeset_create_device_node - Create an empty device node
+ *
+ * @ocs:	changeset pointer
+ * @parent:	parent device node
+ * @fmt:	format string for the node's full_name
+ * @args:	argument list for the format string
+ *
+ * Create an empty device node, marking it as detached and allocated.
+ *
+ * Returns a device node on success, an error encoded pointer otherwise
+ */
+struct device_node *of_changeset_create_device_nodev(
+	struct of_changeset *ocs, struct device_node *parent,
+	const char *fmt, va_list vargs)
+{
+	struct device_node *node;
+
+	node = __of_node_dupv(NULL, fmt, vargs);
+	if (!node)
+		return ERR_PTR(-ENOMEM);
+
+	node->parent = parent;
+	return node;
+}
+EXPORT_SYMBOL_GPL(of_changeset_create_device_nodev);
+
+/**
+ * of_changeset_create_device_node - Create an empty device node
+ *
+ * @ocs:	changeset pointer
+ * @parent:	parent device node
+ * @fmt:	Format string for the node's full_name
+ * ...		Arguments
+ *
+ * Create an empty device node, marking it as detached and allocated.
+ *
+ * Returns a device node on success, an error encoded pointer otherwise
+ */
+__printf(3, 4) struct device_node *
+of_changeset_create_device_node(struct of_changeset *ocs,
+	struct device_node *parent, const char *fmt, ...)
+{
+	va_list vargs;
+	struct device_node *node;
+
+	va_start(vargs, fmt);
+	node = of_changeset_create_device_nodev(ocs, parent, fmt, vargs);
+	va_end(vargs);
+	return node;
+}
+EXPORT_SYMBOL_GPL(of_changeset_create_device_node);
+
+/**
+ * __of_changeset_add_property_copy - Create/update a new property copying
+ *                                    name & value
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @value:	pointer to the value data
+ * @length:	length of the value in bytes
+ * @update:	True on update operation
+ *
+ * Adds/updates a property to the changeset by making copies of the name & value
+ * entries. The @update parameter controls whether an add or update takes place.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+int __of_changeset_add_update_property_copy(struct of_changeset *ocs,
+		struct device_node *np, const char *name, const void *value,
+		int length, bool update)
+{
+	struct property *prop;
+	int ret = -ENOMEM;
+
+	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+	if (!prop)
+		return -ENOMEM;
+
+	prop->name = kstrdup(name, GFP_KERNEL);
+	if (!prop->name)
+		goto out_err;
+
+	/*
+	 * NOTE: There is no check for zero length value.
+	 * In case of a boolean property, this will allocate a value
+	 * of zero bytes. We do this to work around the use
+	 * of of_get_property() calls on boolean values.
+	 */
+	prop->value = kmemdup(value, length, GFP_KERNEL);
+	if (!prop->value)
+		goto out_err;
+
+	of_property_set_flag(prop, OF_DYNAMIC);
+
+	prop->length = length;
+
+	if (!update)
+		ret = of_changeset_add_property(ocs, np, prop);
+	else
+		ret = of_changeset_update_property(ocs, np, prop);
+
+	if (!ret)
+		return 0;
+
+out_err:
+	kfree(prop->value);
+	kfree(prop->name);
+	kfree(prop);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(__of_changeset_add_update_property_copy);
+
+/**
+ * of_changeset_add_property_stringf - Create a new formatted string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @fmt:	format of string property
+ * ...		arguments of the format string
+ *
+ * Adds a string property to the changeset by making copies of the name
+ * and the formatted value.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+__printf(4, 5) int of_changeset_add_property_stringf(
+		struct of_changeset *ocs, struct device_node *np,
+		const char *name, const char *fmt, ...)
+{
+	va_list vargs;
+	int ret;
+
+	va_start(vargs, fmt);
+	ret = __of_changeset_add_update_property_stringv(ocs, np, name, fmt,
+			vargs, false);
+	va_end(vargs);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(of_changeset_add_property_stringf);
+
+/**
+ * of_changeset_update_property_stringf - Update formatted string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @fmt:	format of string property
+ * ...		arguments of the format string
+ *
+ * Updates a string property to the changeset by making copies of the name
+ * and the formatted value.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+int of_changeset_update_property_stringf(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const char *fmt, ...)
+{
+	va_list vargs;
+	int ret;
+
+	va_start(vargs, fmt);
+	ret = __of_changeset_add_update_property_stringv(ocs, np, name, fmt,
+			vargs, true);
+	va_end(vargs);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(of_changeset_update_property_stringf);
+
+/**
+ * __of_changeset_add_update_property_string_list - Create/update a string
+ *                                                  list property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @strs:	pointer to the string list
+ * @count:	string count
+ * @update:	True on update operation
+ *
+ * Adds a string list property to the changeset.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+int __of_changeset_add_update_property_string_list(
+		struct of_changeset *ocs, struct device_node *np,
+		const char *name, const char **strs, int count, bool update)
+{
+	int total = 0, i, ret;
+	char *value, *s;
+
+	for (i = 0; i < count; i++) {
+		/* check if  it's NULL */
+		if (!strs[i])
+			return -EINVAL;
+		total += strlen(strs[i]) + 1;
+	}
+
+	value = kmalloc(total, GFP_KERNEL);
+	if (!value)
+		return -ENOMEM;
+
+	for (i = 0, s = value; i < count; i++) {
+		/* no need to check for NULL, check above */
+		strcpy(s, strs[i]);
+		s += strlen(strs[i]) + 1;
+	}
+
+	ret = __of_changeset_add_update_property_copy(ocs, np, name, value,
+			total, update);
+
+	kfree(value);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(__of_changeset_add_update_property_string_list);
diff --git a/include/linux/of.h b/include/linux/of.h
index da1ee95241c1..f8decae8bd31 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -16,6 +16,7 @@
 #include <linux/errno.h>
 #include <linux/kobject.h>
 #include <linux/mod_devicetable.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/topology.h>
 #include <linux/notifier.h>
@@ -1309,6 +1310,23 @@ static inline int of_changeset_update_property(struct of_changeset *ocs,
 {
 	return of_changeset_action(ocs, OF_RECONFIG_UPDATE_PROPERTY, np, prop);
 }
+
+struct device_node *of_changeset_create_device_nodev(
+	struct of_changeset *ocs, struct device_node *parent,
+	const char *fmt, va_list vargs);
+
+__printf(3, 4) struct device_node *
+of_changeset_create_device_node(struct of_changeset *ocs,
+	struct device_node *parent, const char *fmt, ...);
+
+int __of_changeset_add_update_property_copy(struct of_changeset *ocs,
+		struct device_node *np, const char *name, const void *value,
+		int length, bool update);
+
+int __of_changeset_add_update_property_string_list(
+		struct of_changeset *ocs, struct device_node *np,
+		const char *name, const char **strs, int count, bool update);
+
 #else /* CONFIG_OF_DYNAMIC */
 static inline int of_reconfig_notifier_register(struct notifier_block *nb)
 {
@@ -1328,8 +1346,319 @@ static inline int of_reconfig_get_state_change(unsigned long action,
 {
 	return -EINVAL;
 }
+
+static inline struct device_node *of_changeset_create_device_nodev(
+	struct of_changeset *ocs, struct device_node *parent,
+	const char *fmt, va_list vargs)
+{
+	return ERR_PTR(-EINVAL);
+}
+
+static inline __printf(3, 4) struct device_node *
+of_changeset_create_device_node(struct of_changeset *ocs,
+	struct device_node *parent, const char *fmt, ...)
+{
+	return ERR_PTR(-EINVAL);
+}
+
+static inline int __of_changeset_add_update_property_copy(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const void *value, int length, bool update)
+{
+	return -EINVAL;
+}
+
+static inline __printf(4, 5) int of_changeset_add_property_stringf(
+		struct of_changeset *ocs, struct device_node *np,
+		const char *name, const char *fmt, ...)
+{
+	return -EINVAL;
+}
+
+static inline int of_changeset_update_property_stringf(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const char *fmt, ...)
+{
+	return -EINVAL;
+}
+
+static inline int __of_changeset_add_update_property_string_list(
+		struct of_changeset *ocs, struct device_node *np,
+		const char *name, const char **strs, int count, bool update)
+{
+	return -EINVAL;
+}
+
 #endif /* CONFIG_OF_DYNAMIC */
 
+/**
+ * of_changeset_add_property_copy - Create a new property copying name & value
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @value:	pointer to the value data
+ * @length:	length of the value in bytes
+ *
+ * Adds a property to the changeset by making copies of the name & value
+ * entries.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_add_property_copy(struct of_changeset *ocs,
+	struct device_node *np, const char *name,
+	const void *value, int length)
+{
+	return __of_changeset_add_update_property_copy(ocs, np, name, value,
+			length, false);
+}
+
+/**
+ * of_changeset_update_property_copy - Update a property copying name & value
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @value:	pointer to the value data
+ * @length:	length of the value in bytes
+ *
+ * Update a property to the changeset by making copies of the name & value
+ * entries.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_update_property_copy(struct of_changeset *ocs,
+	struct device_node *np, const char *name,
+	const void *value, int length)
+{
+	return __of_changeset_add_update_property_copy(ocs, np, name, value,
+			length, true);
+}
+
+/**
+ * __of_changeset_add_update_property_string - Create/update a string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @str:	string property value
+ * @update:	True on update operation
+ *
+ * Adds/updates a string property to the changeset by making copies of the name
+ * and the given value. The @update parameter controls whether an add or
+ * update takes place.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int __of_changeset_add_update_property_string(
+	struct of_changeset *ocs, struct device_node *np, const char *name,
+	const char *str, bool update)
+{
+	return __of_changeset_add_update_property_copy(ocs, np, name, str,
+			strlen(str) + 1, update);
+}
+
+/**
+ * __of_changeset_add_update_property_stringv - Create/update a formatted
+ *						string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @fmt:	format of string property
+ * @vargs:	arguments of the format string
+ * @update:	True on update operation
+ *
+ * Adds/updates a string property to the changeset by making copies of the name
+ * and the formatted value. The @update parameter controls whether an add or
+ * update takes place.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int __of_changeset_add_update_property_stringv(
+	struct of_changeset *ocs, struct device_node *np, const char *name,
+	const char *fmt, va_list vargs, bool update)
+{
+	char *str;
+	int ret;
+
+	str = kvasprintf(GFP_KERNEL, fmt, vargs);
+	if (!str)
+		return -ENOMEM;
+	ret = __of_changeset_add_update_property_string(ocs, np, name, str,
+			update);
+	kfree(str);
+
+	return ret;
+}
+
+/**
+ * of_changeset_add_property_string_list - Create a new string list property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @strs:	pointer to the string list
+ * @count:	string count
+ *
+ * Adds a string list property to the changeset.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_add_property_string_list(
+	struct of_changeset *ocs, struct device_node *np, const char *name,
+	const char **strs, int count)
+{
+	return __of_changeset_add_update_property_string_list(ocs, np, name,
+			strs, count, false);
+}
+
+/**
+ * of_changeset_update_property_string_list - Update string list property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @strs:	pointer to the string list
+ * @count:	string count
+ *
+ * Updates a string list property to the changeset.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_update_property_string_list(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const char **strs, int count)
+{
+	return __of_changeset_add_update_property_string_list(ocs, np, name,
+			strs, count, true);
+}
+
+/**
+ * of_changeset_add_property_string - Adds a string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @str:	string property
+ *
+ * Adds a string property to the changeset by making copies of the name
+ * and the string value.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_add_property_string(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const char *str)
+{
+	return __of_changeset_add_update_property_string(ocs, np, name, str,
+			false);
+}
+
+/**
+ * of_changeset_update_property_string - Update a string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @str:	string property
+ *
+ * Updates a string property to the changeset by making copies of the name
+ * and the string value.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_update_property_string(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const char *str)
+{
+	return __of_changeset_add_update_property_string(ocs, np, name, str,
+			true);
+}
+
+/**
+ * of_changeset_add_property_u32 - Create a new u32 property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @val:	value in host endian format
+ *
+ * Adds a u32 property to the changeset.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_add_property_u32(struct of_changeset *ocs,
+		struct device_node *np, const char *name, u32 val)
+{
+	__be32 v = cpu_to_be32(val);
+
+	return __of_changeset_add_update_property_copy(ocs, np, name, &v,
+			sizeof(v), false);
+}
+
+/**
+ * of_changeset_update_property_u32 - Update u32 property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @val:	value in host endian format
+ *
+ * Updates a u32 property to the changeset.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_update_property_u32(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, u32 val)
+{
+	__be32 v = cpu_to_be32(val);
+
+	return __of_changeset_add_update_property_copy(ocs, np, name, &v,
+			sizeof(v), true);
+}
+
+/**
+ * of_changeset_add_property_bool - Create a new u32 property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ *
+ * Adds a bool property to the changeset. Note that there is
+ * no option to set the value to false, since the property
+ * existing sets it to true.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_add_property_bool(
+	struct of_changeset *ocs, struct device_node *np, const char *name)
+{
+	return __of_changeset_add_update_property_copy(ocs, np, name, "", 0,
+			false);
+}
+
+/**
+ * of_changeset_update_property_bool - Update a bool property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ *
+ * Updates a property to the changeset. Note that there is
+ * no option to set the value to false, since the property
+ * existing sets it to true.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_update_property_bool(struct of_changeset *ocs,
+		struct device_node *np, const char *name)
+{
+	return __of_changeset_add_update_property_copy(ocs, np, name, "", 0,
+			true);
+}
+
 /**
  * of_device_is_system_power_controller - Tells if system-power-controller is found for device_node
  * @np: Pointer to the given device_node
-- 
Regards,

Laurent Pinchart

[PATCH v5 4/8] of: changesets: Introduce changeset helper methods

[Laurent Pinchart]

From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>

Changesets are very powerful, but the lack of a helper API
makes using them cumbersome. Introduce a simple copy based
API that makes things considerably easier.

To wit, adding a property using the raw API.

	struct property *prop;
	prop = kzalloc(sizeof(*prop)), GFP_KERNEL);
	prop->name = kstrdup("compatible");
	prop->value = kstrdup("foo,bar");
	prop->length = strlen(prop->value) + 1;
	of_changeset_add_property(ocs, np, prop);

while using the helper API

	of_changeset_add_property_string(ocs, np, "compatible",
			"foo,bar");

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[Fixed memory leak in __of_changeset_add_update_property_copy()]
[Fixed cpu to be32 conversion sparse warnings]
[Move include <linux/slab.h> to fix compilation when !CONFIG_OF_DYNAMIC]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 drivers/of/dynamic.c | 222 ++++++++++++++++++++++++++++++++++
 include/linux/of.h   | 329 +++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 551 insertions(+)

diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index a2f0c45836f9..f62083921df2 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -910,3 +910,225 @@ int of_changeset_action(struct of_changeset *ocs, unsigned long action,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(of_changeset_action);
+
+/* changeset helpers */
+
+/**
+ * of_changeset_create_device_node - Create an empty device node
+ *
+ * @ocs:	changeset pointer
+ * @parent:	parent device node
+ * @fmt:	format string for the node's full_name
+ * @args:	argument list for the format string
+ *
+ * Create an empty device node, marking it as detached and allocated.
+ *
+ * Returns a device node on success, an error encoded pointer otherwise
+ */
+struct device_node *of_changeset_create_device_nodev(
+	struct of_changeset *ocs, struct device_node *parent,
+	const char *fmt, va_list vargs)
+{
+	struct device_node *node;
+
+	node = __of_node_dupv(NULL, fmt, vargs);
+	if (!node)
+		return ERR_PTR(-ENOMEM);
+
+	node->parent = parent;
+	return node;
+}
+EXPORT_SYMBOL_GPL(of_changeset_create_device_nodev);
+
+/**
+ * of_changeset_create_device_node - Create an empty device node
+ *
+ * @ocs:	changeset pointer
+ * @parent:	parent device node
+ * @fmt:	Format string for the node's full_name
+ * ...		Arguments
+ *
+ * Create an empty device node, marking it as detached and allocated.
+ *
+ * Returns a device node on success, an error encoded pointer otherwise
+ */
+__printf(3, 4) struct device_node *
+of_changeset_create_device_node(struct of_changeset *ocs,
+	struct device_node *parent, const char *fmt, ...)
+{
+	va_list vargs;
+	struct device_node *node;
+
+	va_start(vargs, fmt);
+	node = of_changeset_create_device_nodev(ocs, parent, fmt, vargs);
+	va_end(vargs);
+	return node;
+}
+EXPORT_SYMBOL_GPL(of_changeset_create_device_node);
+
+/**
+ * __of_changeset_add_property_copy - Create/update a new property copying
+ *                                    name & value
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @value:	pointer to the value data
+ * @length:	length of the value in bytes
+ * @update:	True on update operation
+ *
+ * Adds/updates a property to the changeset by making copies of the name & value
+ * entries. The @update parameter controls whether an add or update takes place.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+int __of_changeset_add_update_property_copy(struct of_changeset *ocs,
+		struct device_node *np, const char *name, const void *value,
+		int length, bool update)
+{
+	struct property *prop;
+	int ret = -ENOMEM;
+
+	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+	if (!prop)
+		return -ENOMEM;
+
+	prop->name = kstrdup(name, GFP_KERNEL);
+	if (!prop->name)
+		goto out_err;
+
+	/*
+	 * NOTE: There is no check for zero length value.
+	 * In case of a boolean property, this will allocate a value
+	 * of zero bytes. We do this to work around the use
+	 * of of_get_property() calls on boolean values.
+	 */
+	prop->value = kmemdup(value, length, GFP_KERNEL);
+	if (!prop->value)
+		goto out_err;
+
+	of_property_set_flag(prop, OF_DYNAMIC);
+
+	prop->length = length;
+
+	if (!update)
+		ret = of_changeset_add_property(ocs, np, prop);
+	else
+		ret = of_changeset_update_property(ocs, np, prop);
+
+	if (!ret)
+		return 0;
+
+out_err:
+	kfree(prop->value);
+	kfree(prop->name);
+	kfree(prop);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(__of_changeset_add_update_property_copy);
+
+/**
+ * of_changeset_add_property_stringf - Create a new formatted string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @fmt:	format of string property
+ * ...		arguments of the format string
+ *
+ * Adds a string property to the changeset by making copies of the name
+ * and the formatted value.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+__printf(4, 5) int of_changeset_add_property_stringf(
+		struct of_changeset *ocs, struct device_node *np,
+		const char *name, const char *fmt, ...)
+{
+	va_list vargs;
+	int ret;
+
+	va_start(vargs, fmt);
+	ret = __of_changeset_add_update_property_stringv(ocs, np, name, fmt,
+			vargs, false);
+	va_end(vargs);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(of_changeset_add_property_stringf);
+
+/**
+ * of_changeset_update_property_stringf - Update formatted string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @fmt:	format of string property
+ * ...		arguments of the format string
+ *
+ * Updates a string property to the changeset by making copies of the name
+ * and the formatted value.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+int of_changeset_update_property_stringf(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const char *fmt, ...)
+{
+	va_list vargs;
+	int ret;
+
+	va_start(vargs, fmt);
+	ret = __of_changeset_add_update_property_stringv(ocs, np, name, fmt,
+			vargs, true);
+	va_end(vargs);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(of_changeset_update_property_stringf);
+
+/**
+ * __of_changeset_add_update_property_string_list - Create/update a string
+ *                                                  list property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @strs:	pointer to the string list
+ * @count:	string count
+ * @update:	True on update operation
+ *
+ * Adds a string list property to the changeset.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+int __of_changeset_add_update_property_string_list(
+		struct of_changeset *ocs, struct device_node *np,
+		const char *name, const char **strs, int count, bool update)
+{
+	int total = 0, i, ret;
+	char *value, *s;
+
+	for (i = 0; i < count; i++) {
+		/* check if  it's NULL */
+		if (!strs[i])
+			return -EINVAL;
+		total += strlen(strs[i]) + 1;
+	}
+
+	value = kmalloc(total, GFP_KERNEL);
+	if (!value)
+		return -ENOMEM;
+
+	for (i = 0, s = value; i < count; i++) {
+		/* no need to check for NULL, check above */
+		strcpy(s, strs[i]);
+		s += strlen(strs[i]) + 1;
+	}
+
+	ret = __of_changeset_add_update_property_copy(ocs, np, name, value,
+			total, update);
+
+	kfree(value);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(__of_changeset_add_update_property_string_list);
diff --git a/include/linux/of.h b/include/linux/of.h
index da1ee95241c1..f8decae8bd31 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -16,6 +16,7 @@
 #include <linux/errno.h>
 #include <linux/kobject.h>
 #include <linux/mod_devicetable.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/topology.h>
 #include <linux/notifier.h>
@@ -1309,6 +1310,23 @@ static inline int of_changeset_update_property(struct of_changeset *ocs,
 {
 	return of_changeset_action(ocs, OF_RECONFIG_UPDATE_PROPERTY, np, prop);
 }
+
+struct device_node *of_changeset_create_device_nodev(
+	struct of_changeset *ocs, struct device_node *parent,
+	const char *fmt, va_list vargs);
+
+__printf(3, 4) struct device_node *
+of_changeset_create_device_node(struct of_changeset *ocs,
+	struct device_node *parent, const char *fmt, ...);
+
+int __of_changeset_add_update_property_copy(struct of_changeset *ocs,
+		struct device_node *np, const char *name, const void *value,
+		int length, bool update);
+
+int __of_changeset_add_update_property_string_list(
+		struct of_changeset *ocs, struct device_node *np,
+		const char *name, const char **strs, int count, bool update);
+
 #else /* CONFIG_OF_DYNAMIC */
 static inline int of_reconfig_notifier_register(struct notifier_block *nb)
 {
@@ -1328,8 +1346,319 @@ static inline int of_reconfig_get_state_change(unsigned long action,
 {
 	return -EINVAL;
 }
+
+static inline struct device_node *of_changeset_create_device_nodev(
+	struct of_changeset *ocs, struct device_node *parent,
+	const char *fmt, va_list vargs)
+{
+	return ERR_PTR(-EINVAL);
+}
+
+static inline __printf(3, 4) struct device_node *
+of_changeset_create_device_node(struct of_changeset *ocs,
+	struct device_node *parent, const char *fmt, ...)
+{
+	return ERR_PTR(-EINVAL);
+}
+
+static inline int __of_changeset_add_update_property_copy(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const void *value, int length, bool update)
+{
+	return -EINVAL;
+}
+
+static inline __printf(4, 5) int of_changeset_add_property_stringf(
+		struct of_changeset *ocs, struct device_node *np,
+		const char *name, const char *fmt, ...)
+{
+	return -EINVAL;
+}
+
+static inline int of_changeset_update_property_stringf(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const char *fmt, ...)
+{
+	return -EINVAL;
+}
+
+static inline int __of_changeset_add_update_property_string_list(
+		struct of_changeset *ocs, struct device_node *np,
+		const char *name, const char **strs, int count, bool update)
+{
+	return -EINVAL;
+}
+
 #endif /* CONFIG_OF_DYNAMIC */
 
+/**
+ * of_changeset_add_property_copy - Create a new property copying name & value
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @value:	pointer to the value data
+ * @length:	length of the value in bytes
+ *
+ * Adds a property to the changeset by making copies of the name & value
+ * entries.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_add_property_copy(struct of_changeset *ocs,
+	struct device_node *np, const char *name,
+	const void *value, int length)
+{
+	return __of_changeset_add_update_property_copy(ocs, np, name, value,
+			length, false);
+}
+
+/**
+ * of_changeset_update_property_copy - Update a property copying name & value
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @value:	pointer to the value data
+ * @length:	length of the value in bytes
+ *
+ * Update a property to the changeset by making copies of the name & value
+ * entries.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_update_property_copy(struct of_changeset *ocs,
+	struct device_node *np, const char *name,
+	const void *value, int length)
+{
+	return __of_changeset_add_update_property_copy(ocs, np, name, value,
+			length, true);
+}
+
+/**
+ * __of_changeset_add_update_property_string - Create/update a string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @str:	string property value
+ * @update:	True on update operation
+ *
+ * Adds/updates a string property to the changeset by making copies of the name
+ * and the given value. The @update parameter controls whether an add or
+ * update takes place.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int __of_changeset_add_update_property_string(
+	struct of_changeset *ocs, struct device_node *np, const char *name,
+	const char *str, bool update)
+{
+	return __of_changeset_add_update_property_copy(ocs, np, name, str,
+			strlen(str) + 1, update);
+}
+
+/**
+ * __of_changeset_add_update_property_stringv - Create/update a formatted
+ *						string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @fmt:	format of string property
+ * @vargs:	arguments of the format string
+ * @update:	True on update operation
+ *
+ * Adds/updates a string property to the changeset by making copies of the name
+ * and the formatted value. The @update parameter controls whether an add or
+ * update takes place.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int __of_changeset_add_update_property_stringv(
+	struct of_changeset *ocs, struct device_node *np, const char *name,
+	const char *fmt, va_list vargs, bool update)
+{
+	char *str;
+	int ret;
+
+	str = kvasprintf(GFP_KERNEL, fmt, vargs);
+	if (!str)
+		return -ENOMEM;
+	ret = __of_changeset_add_update_property_string(ocs, np, name, str,
+			update);
+	kfree(str);
+
+	return ret;
+}
+
+/**
+ * of_changeset_add_property_string_list - Create a new string list property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @strs:	pointer to the string list
+ * @count:	string count
+ *
+ * Adds a string list property to the changeset.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_add_property_string_list(
+	struct of_changeset *ocs, struct device_node *np, const char *name,
+	const char **strs, int count)
+{
+	return __of_changeset_add_update_property_string_list(ocs, np, name,
+			strs, count, false);
+}
+
+/**
+ * of_changeset_update_property_string_list - Update string list property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @strs:	pointer to the string list
+ * @count:	string count
+ *
+ * Updates a string list property to the changeset.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_update_property_string_list(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const char **strs, int count)
+{
+	return __of_changeset_add_update_property_string_list(ocs, np, name,
+			strs, count, true);
+}
+
+/**
+ * of_changeset_add_property_string - Adds a string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @str:	string property
+ *
+ * Adds a string property to the changeset by making copies of the name
+ * and the string value.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_add_property_string(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const char *str)
+{
+	return __of_changeset_add_update_property_string(ocs, np, name, str,
+			false);
+}
+
+/**
+ * of_changeset_update_property_string - Update a string property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @str:	string property
+ *
+ * Updates a string property to the changeset by making copies of the name
+ * and the string value.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_update_property_string(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, const char *str)
+{
+	return __of_changeset_add_update_property_string(ocs, np, name, str,
+			true);
+}
+
+/**
+ * of_changeset_add_property_u32 - Create a new u32 property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @val:	value in host endian format
+ *
+ * Adds a u32 property to the changeset.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_add_property_u32(struct of_changeset *ocs,
+		struct device_node *np, const char *name, u32 val)
+{
+	__be32 v = cpu_to_be32(val);
+
+	return __of_changeset_add_update_property_copy(ocs, np, name, &v,
+			sizeof(v), false);
+}
+
+/**
+ * of_changeset_update_property_u32 - Update u32 property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ * @val:	value in host endian format
+ *
+ * Updates a u32 property to the changeset.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_update_property_u32(
+	struct of_changeset *ocs, struct device_node *np,
+	const char *name, u32 val)
+{
+	__be32 v = cpu_to_be32(val);
+
+	return __of_changeset_add_update_property_copy(ocs, np, name, &v,
+			sizeof(v), true);
+}
+
+/**
+ * of_changeset_add_property_bool - Create a new u32 property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ *
+ * Adds a bool property to the changeset. Note that there is
+ * no option to set the value to false, since the property
+ * existing sets it to true.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_add_property_bool(
+	struct of_changeset *ocs, struct device_node *np, const char *name)
+{
+	return __of_changeset_add_update_property_copy(ocs, np, name, "", 0,
+			false);
+}
+
+/**
+ * of_changeset_update_property_bool - Update a bool property
+ *
+ * @ocs:	changeset pointer
+ * @np:		device node pointer
+ * @name:	name of the property
+ *
+ * Updates a property to the changeset. Note that there is
+ * no option to set the value to false, since the property
+ * existing sets it to true.
+ *
+ * Returns zero on success, a negative error value otherwise.
+ */
+static inline int of_changeset_update_property_bool(struct of_changeset *ocs,
+		struct device_node *np, const char *name)
+{
+	return __of_changeset_add_update_property_copy(ocs, np, name, "", 0,
+			true);
+}
+
 /**
  * of_device_is_system_power_controller - Tells if system-power-controller is found for device_node
  * @np: Pointer to the given device_node
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 5/8] of: unittest: changeset helpers

[Laurent Pinchart]

From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>

Add a unitest specific for the new changeset helpers.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[Use IS_ENABLED instead of #ifdef]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 drivers/of/unittest.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 7a9abaae874d..1b21d2c549a8 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -609,6 +609,59 @@ static void __init of_unittest_changeset(void)
 #endif
 }
 
+static void __init of_unittest_changeset_helper(void)
+{
+#ifdef CONFIG_OF_DYNAMIC
+	struct device_node *n1, *n2, *n21, *parent, *np;
+	struct of_changeset chgset;
+
+	of_changeset_init(&chgset);
+
+	parent = of_find_node_by_path("/testcase-data/changeset");
+
+	unittest(parent, "testcase setup failure\n");
+	n1 = of_changeset_create_device_node(&chgset,
+			parent, "/testcase-data/changeset/n1");
+	unittest(n1, "testcase setup failure\n");
+	n2 = of_changeset_create_device_node(&chgset,
+			parent, "/testcase-data/changeset/n2");
+	unittest(n2, "testcase setup failure\n");
+	n21 = of_changeset_create_device_node(&chgset, n2, "%s/%s",
+			"/testcase-data/changeset/n2", "n21");
+	unittest(n21, "testcase setup failure\n");
+
+	unittest(!of_changeset_add_property_string(&chgset, parent,
+				"prop-add", "foo"), "fail add prop\n");
+
+	unittest(!of_changeset_attach_node(&chgset, n1), "fail n1 attach\n");
+	unittest(!of_changeset_attach_node(&chgset, n2), "fail n2 attach\n");
+	unittest(!of_changeset_attach_node(&chgset, n21), "fail n21 attach\n");
+
+	unittest(!of_changeset_apply(&chgset), "apply failed\n");
+
+	/* Make sure node names are constructed correctly */
+	np = of_find_node_by_path("/testcase-data/changeset/n1");
+	unittest(np, "'%s' not added\n", n1->full_name);
+	of_node_put(np);
+
+	/* Make sure node names are constructed correctly */
+	np = of_find_node_by_path("/testcase-data/changeset/n2");
+	unittest(np, "'%s' not added\n", n2->full_name);
+	of_node_put(np);
+
+	np = of_find_node_by_path("/testcase-data/changeset/n2/n21");
+	unittest(np, "'%s' not added\n", n21->full_name);
+	of_node_put(np);
+
+	unittest(!of_changeset_revert(&chgset), "revert failed\n");
+
+	of_changeset_destroy(&chgset);
+
+	of_node_put(parent);
+#endif
+}
+
+
 static void __init of_unittest_parse_interrupts(void)
 {
 	struct device_node *np;
@@ -2363,6 +2416,7 @@ static int __init of_unittest(void)
 	of_unittest_property_string();
 	of_unittest_property_copy();
 	of_unittest_changeset();
+	of_unittest_changeset_helper();
 	of_unittest_parse_interrupts();
 	of_unittest_parse_interrupts_extended();
 	of_unittest_match_node();
-- 
Regards,

Laurent Pinchart

[PATCH v5 5/8] of: unittest: changeset helpers

[Laurent Pinchart]

From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>

Add a unitest specific for the new changeset helpers.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[Use IS_ENABLED instead of #ifdef]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 drivers/of/unittest.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 7a9abaae874d..1b21d2c549a8 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -609,6 +609,59 @@ static void __init of_unittest_changeset(void)
 #endif
 }
 
+static void __init of_unittest_changeset_helper(void)
+{
+#ifdef CONFIG_OF_DYNAMIC
+	struct device_node *n1, *n2, *n21, *parent, *np;
+	struct of_changeset chgset;
+
+	of_changeset_init(&chgset);
+
+	parent = of_find_node_by_path("/testcase-data/changeset");
+
+	unittest(parent, "testcase setup failure\n");
+	n1 = of_changeset_create_device_node(&chgset,
+			parent, "/testcase-data/changeset/n1");
+	unittest(n1, "testcase setup failure\n");
+	n2 = of_changeset_create_device_node(&chgset,
+			parent, "/testcase-data/changeset/n2");
+	unittest(n2, "testcase setup failure\n");
+	n21 = of_changeset_create_device_node(&chgset, n2, "%s/%s",
+			"/testcase-data/changeset/n2", "n21");
+	unittest(n21, "testcase setup failure\n");
+
+	unittest(!of_changeset_add_property_string(&chgset, parent,
+				"prop-add", "foo"), "fail add prop\n");
+
+	unittest(!of_changeset_attach_node(&chgset, n1), "fail n1 attach\n");
+	unittest(!of_changeset_attach_node(&chgset, n2), "fail n2 attach\n");
+	unittest(!of_changeset_attach_node(&chgset, n21), "fail n21 attach\n");
+
+	unittest(!of_changeset_apply(&chgset), "apply failed\n");
+
+	/* Make sure node names are constructed correctly */
+	np = of_find_node_by_path("/testcase-data/changeset/n1");
+	unittest(np, "'%s' not added\n", n1->full_name);
+	of_node_put(np);
+
+	/* Make sure node names are constructed correctly */
+	np = of_find_node_by_path("/testcase-data/changeset/n2");
+	unittest(np, "'%s' not added\n", n2->full_name);
+	of_node_put(np);
+
+	np = of_find_node_by_path("/testcase-data/changeset/n2/n21");
+	unittest(np, "'%s' not added\n", n21->full_name);
+	of_node_put(np);
+
+	unittest(!of_changeset_revert(&chgset), "revert failed\n");
+
+	of_changeset_destroy(&chgset);
+
+	of_node_put(parent);
+#endif
+}
+
+
 static void __init of_unittest_parse_interrupts(void)
 {
 	struct device_node *np;
@@ -2363,6 +2416,7 @@ static int __init of_unittest(void)
 	of_unittest_property_string();
 	of_unittest_property_copy();
 	of_unittest_changeset();
+	of_unittest_changeset_helper();
 	of_unittest_parse_interrupts();
 	of_unittest_parse_interrupts_extended();
 	of_unittest_match_node();
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 6/8] i2c: demux: Use changeset helpers for clarity

[Laurent Pinchart]

From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>

The changeset helpers are easier to use, use them instead of
using the static property.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
["okay" -> "ok"]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/i2c/muxes/i2c-demux-pinctrl.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
index 33ce032cb701..0f0046831492 100644
--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -220,10 +220,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv)
 			   + num_chan * sizeof(struct i2c_demux_pinctrl_chan), GFP_KERNEL);
-
-	props = devm_kcalloc(&pdev->dev, num_chan, sizeof(*props), GFP_KERNEL);
-
-	if (!priv || !props)
+	if (!priv)
 		return -ENOMEM;
 
 	err = of_property_read_string(np, "i2c-bus-name", &priv->bus_name);
@@ -241,12 +238,9 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 		}
 		priv->chan[i].parent_np = adap_np;
 
-		props[i].name = devm_kstrdup(&pdev->dev, "status", GFP_KERNEL);
-		props[i].value = devm_kstrdup(&pdev->dev, "ok", GFP_KERNEL);
-		props[i].length = 3;
-
 		of_changeset_init(&priv->chan[i].chgset);
-		of_changeset_update_property(&priv->chan[i].chgset, adap_np, &props[i]);
+		of_changeset_update_property_string(&priv->chan[i].chgset,
+						    adap_np, "status", "ok");
 	}
 
 	priv->num_chan = num_chan;
-- 
Regards,

Laurent Pinchart

[PATCH v5 6/8] i2c: demux: Use changeset helpers for clarity

[Laurent Pinchart]

From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>

The changeset helpers are easier to use, use them instead of
using the static property.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
["okay" -> "ok"]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/i2c/muxes/i2c-demux-pinctrl.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
index 33ce032cb701..0f0046831492 100644
--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -220,10 +220,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv)
 			   + num_chan * sizeof(struct i2c_demux_pinctrl_chan), GFP_KERNEL);
-
-	props = devm_kcalloc(&pdev->dev, num_chan, sizeof(*props), GFP_KERNEL);
-
-	if (!priv || !props)
+	if (!priv)
 		return -ENOMEM;
 
 	err = of_property_read_string(np, "i2c-bus-name", &priv->bus_name);
@@ -241,12 +238,9 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 		}
 		priv->chan[i].parent_np = adap_np;
 
-		props[i].name = devm_kstrdup(&pdev->dev, "status", GFP_KERNEL);
-		props[i].value = devm_kstrdup(&pdev->dev, "ok", GFP_KERNEL);
-		props[i].length = 3;
-
 		of_changeset_init(&priv->chan[i].chgset);
-		of_changeset_update_property(&priv->chan[i].chgset, adap_np, &props[i]);
+		of_changeset_update_property_string(&priv->chan[i].chgset,
+						    adap_np, "status", "ok");
 	}
 
 	priv->num_chan = num_chan;
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 7/8] drm: rcar-du: Fix legacy DT to create LVDS encoder nodes

[Laurent Pinchart]

The internal LVDS encoders now have their own DT bindings. Before
switching the driver infrastructure to those new bindings, implement
backward-compatibility through live DT patching.

Patching is disabled and will be enabled along with support for the new
DT bindings in the DU driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
Changes since v3:

- Use the OF changeset API
- Use of_graph_get_endpoint_by_regs()
- Replace hardcoded constants by sizeof()

Changes since v2:

- Update the SPDX headers to use C-style comments in header files
- Removed the manually created __local_fixups__ node
- Perform manual fixups on live DT instead of overlay

Changes since v1:

- Select OF_FLATTREE
- Compile LVDS DT bindings patch code when DRM_RCAR_LVDS is selected
- Update the SPDX headers to use GPL-2.0 instead of GPL-2.0-only
- Turn __dtb_rcar_du_of_lvds_(begin|end) from u8 to char
- Pass void begin and end pointers to rcar_du_of_get_overlay()
- Use of_get_parent() instead of accessing the parent pointer directly
- Find the LVDS endpoints nodes based on the LVDS node instead of the
  root of the overlay
- Update to the <soc>-lvds compatible string format
---
 drivers/gpu/drm/rcar-du/Kconfig                    |   2 +
 drivers/gpu/drm/rcar-du/Makefile                   |   7 +-
 drivers/gpu/drm/rcar-du/rcar_du_of.c               | 307 +++++++++++++++++++++
 drivers/gpu/drm/rcar-du/rcar_du_of.h               |  20 ++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts    |  79 ++++++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts    |  53 ++++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts    |  53 ++++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts    |  53 ++++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts    |  53 ++++
 9 files changed, 626 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of.c
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of.h
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts

diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
index 5d0b4b7119af..3f83352a7313 100644
--- a/drivers/gpu/drm/rcar-du/Kconfig
+++ b/drivers/gpu/drm/rcar-du/Kconfig
@@ -22,6 +22,8 @@ config DRM_RCAR_LVDS
 	bool "R-Car DU LVDS Encoder Support"
 	depends on DRM_RCAR_DU
 	select DRM_PANEL
+	select OF_FLATTREE
+	select OF_OVERLAY
 	help
 	  Enable support for the R-Car Display Unit embedded LVDS encoders.
 
diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile
index 0cf5c11030e8..86b337b4be5d 100644
--- a/drivers/gpu/drm/rcar-du/Makefile
+++ b/drivers/gpu/drm/rcar-du/Makefile
@@ -8,7 +8,12 @@ rcar-du-drm-y := rcar_du_crtc.o \
 		 rcar_du_plane.o
 
 rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_lvdsenc.o
-
+rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_of.o \
+					   rcar_du_of_lvds_r8a7790.dtb.o \
+					   rcar_du_of_lvds_r8a7791.dtb.o \
+					   rcar_du_of_lvds_r8a7793.dtb.o \
+					   rcar_du_of_lvds_r8a7795.dtb.o \
+					   rcar_du_of_lvds_r8a7796.dtb.o
 rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o
 
 obj-$(CONFIG_DRM_RCAR_DU)		+= rcar-du-drm.o
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of.c b/drivers/gpu/drm/rcar-du/rcar_du_of.c
new file mode 100644
index 000000000000..12fae8814309
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of.c - Legacy DT bindings compatibility
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_graph.h>
+#include <linux/slab.h>
+
+#include "rcar_du_crtc.h"
+#include "rcar_du_drv.h"
+
+/* -----------------------------------------------------------------------------
+ * Generic Overlay Handling
+ */
+
+struct rcar_du_of_overlay {
+	const char *compatible;
+	void *begin;
+	void *end;
+};
+
+#define RCAR_DU_OF_DTB(type, soc)					\
+	extern char __dtb_rcar_du_of_##type##_##soc##_begin[];		\
+	extern char __dtb_rcar_du_of_##type##_##soc##_end[]
+
+#define RCAR_DU_OF_OVERLAY(type, soc)					\
+	{								\
+		.compatible = "renesas,du-" #soc,			\
+		.begin = __dtb_rcar_du_of_##type##_##soc##_begin,	\
+		.end = __dtb_rcar_du_of_##type##_##soc##_end,		\
+	}
+
+static int __init rcar_du_of_apply_overlay(const struct rcar_du_of_overlay *dtbs,
+					   const char *compatible)
+{
+	const struct rcar_du_of_overlay *dtb = NULL;
+	struct device_node *node = NULL;
+	unsigned int i;
+	int ovcs_id;
+	void *data;
+	void *mem;
+	int ret;
+
+	for (i = 0; dtbs[i].compatible; ++i) {
+		if (!strcmp(dtbs[i].compatible, compatible)) {
+			dtb = &dtbs[i];
+			break;
+		}
+	}
+
+	if (!dtb)
+		return -ENODEV;
+
+	data = kmemdup(dtb->begin, dtb->end - dtb->begin, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	mem = of_fdt_unflatten_tree(data, NULL, &node);
+	if (!mem) {
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	ovcs_id = 0;
+	ret = of_overlay_apply(node, &ovcs_id);
+
+done:
+	of_node_put(node);
+	kfree(data);
+	kfree(mem);
+
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * LVDS Overlays
+ */
+
+RCAR_DU_OF_DTB(lvds, r8a7790);
+RCAR_DU_OF_DTB(lvds, r8a7791);
+RCAR_DU_OF_DTB(lvds, r8a7793);
+RCAR_DU_OF_DTB(lvds, r8a7795);
+RCAR_DU_OF_DTB(lvds, r8a7796);
+
+static const struct rcar_du_of_overlay rcar_du_lvds_overlays[] __initconst = {
+	RCAR_DU_OF_OVERLAY(lvds, r8a7790),
+	RCAR_DU_OF_OVERLAY(lvds, r8a7791),
+	RCAR_DU_OF_OVERLAY(lvds, r8a7793),
+	RCAR_DU_OF_OVERLAY(lvds, r8a7795),
+	RCAR_DU_OF_OVERLAY(lvds, r8a7796),
+	{ /* Sentinel */ },
+};
+
+static struct of_changeset rcar_du_lvds_changeset;
+
+static void __init rcar_du_of_lvds_patch_one(struct device_node *lvds,
+					     const struct of_phandle_args *clk,
+					     struct device_node *local,
+					     struct device_node *remote)
+{
+	unsigned int psize;
+	unsigned int i;
+	__be32 value[4];
+	int ret;
+
+	/*
+	 * Set the LVDS clocks property. This can't be performed by the overlay
+	 * as the structure of the clock specifier has changed over time, and we
+	 * don't know at compile time which binding version the system we will
+	 * run on uses.
+	 */
+	if (clk->args_count >= ARRAY_SIZE(value) - 1)
+		return;
+
+	of_changeset_init(&rcar_du_lvds_changeset);
+
+	value[0] = cpu_to_be32(clk->np->phandle);
+	for (i = 0; i < clk->args_count; ++i)
+		value[i + 1] = cpu_to_be32(clk->args[i]);
+
+	psize = (clk->args_count + 1) * 4;
+	ret = of_changeset_add_property_copy(&rcar_du_lvds_changeset, lvds,
+					     "clocks", value, psize);
+	if (ret < 0)
+		goto done;
+
+	/*
+	 * Insert the node in the OF graph: patch the LVDS ports remote-endpoint
+	 * properties to point to the endpoints of the sibling nodes in the
+	 * graph. This can't be performed by the overlay: on the input side the
+	 * overlay would contain a phandle for the DU LVDS output port that
+	 * would clash with the system DT, and on the output side the connection
+	 * is board-specific.
+	 */
+	value[0] = cpu_to_be32(local->phandle);
+	value[1] = cpu_to_be32(remote->phandle);
+
+	for (i = 0; i < 2; ++i) {
+		struct device_node *endpoint;
+
+		endpoint = of_graph_get_endpoint_by_regs(lvds, i, 0);
+		if (!endpoint) {
+			ret = -EINVAL;
+			goto done;
+		}
+
+		ret = of_changeset_add_property_copy(&rcar_du_lvds_changeset,
+						endpoint, "remote-endpoint",
+						&value[i], sizeof(value[i]));
+		of_node_put(endpoint);
+		if (ret < 0)
+			goto done;
+	}
+
+	ret = of_changeset_apply(&rcar_du_lvds_changeset);
+
+done:
+	if (ret < 0)
+		of_changeset_destroy(&rcar_du_lvds_changeset);
+}
+
+struct lvds_of_data {
+	struct resource res;
+	struct of_phandle_args clkspec;
+	struct device_node *local;
+	struct device_node *remote;
+};
+
+static void __init rcar_du_of_lvds_patch(const struct of_device_id *of_ids)
+{
+	const struct rcar_du_device_info *info;
+	const struct of_device_id *match;
+	struct lvds_of_data lvds_data[2] = { };
+	struct device_node *lvds_node;
+	struct device_node *soc_node;
+	struct device_node *du_node;
+	char compatible[21];
+	const char *soc_name;
+	unsigned int i;
+	int ret;
+
+	/* Get the DU node and exit if not present or disabled. */
+	du_node = of_find_matching_node_and_match(NULL, of_ids, &match);
+	if (!du_node || !of_device_is_available(du_node)) {
+		of_node_put(du_node);
+		return;
+	}
+
+	info = match->data;
+	soc_node = of_get_parent(du_node);
+
+	if (WARN_ON(info->num_lvds > ARRAY_SIZE(lvds_data)))
+		goto done;
+
+	/*
+	 * Skip if the LVDS nodes already exists.
+	 *
+	 * The nodes are searched based on the compatible string, which we
+	 * construct from the SoC name found in the DU compatible string. As a
+	 * match has been found we know the compatible string matches the
+	 * expected format and can thus skip some of the string manipulation
+	 * normal safety checks.
+	 */
+	soc_name = strchr(match->compatible, '-') + 1;
+	sprintf(compatible, "renesas,%s-lvds", soc_name);
+	lvds_node = of_find_compatible_node(NULL, NULL, compatible);
+	if (lvds_node) {
+		of_node_put(lvds_node);
+		return;
+	}
+
+	/*
+	 * Parse the DU node and store the register specifier, the clock
+	 * specifier and the local and remote endpoint of the LVDS link for
+	 * later use.
+	 */
+	for (i = 0; i < info->num_lvds; ++i) {
+		struct lvds_of_data *lvds = &lvds_data[i];
+		unsigned int port;
+		char name[7];
+		int index;
+
+		sprintf(name, "lvds.%u", i);
+		index = of_property_match_string(du_node, "clock-names", name);
+		if (index < 0)
+			continue;
+
+		ret = of_parse_phandle_with_args(du_node, "clocks",
+						 "#clock-cells", index,
+						 &lvds->clkspec);
+		if (ret < 0)
+			continue;
+
+		port = info->routes[RCAR_DU_OUTPUT_LVDS0 + i].port;
+
+		lvds->local = of_graph_get_endpoint_by_regs(du_node, port, 0);
+		if (!lvds->local)
+			continue;
+
+		lvds->remote = of_graph_get_remote_endpoint(lvds->local);
+		if (!lvds->remote)
+			continue;
+
+		index = of_property_match_string(du_node, "reg-names", name);
+		if (index < 0)
+			continue;
+
+		of_address_to_resource(du_node, index, &lvds->res);
+	}
+
+	/* Parse and apply the overlay. This will resolve phandles. */
+	ret = rcar_du_of_apply_overlay(rcar_du_lvds_overlays,
+				       match->compatible);
+	if (ret < 0)
+		goto done;
+
+	/* Patch the newly created LVDS encoder nodes. */
+	for_each_child_of_node(soc_node, lvds_node) {
+		struct resource res;
+
+		if (!of_device_is_compatible(lvds_node, compatible))
+			continue;
+
+		/* Locate the lvds_data entry based on the resource start. */
+		ret = of_address_to_resource(lvds_node, 0, &res);
+		if (ret < 0)
+			continue;
+
+		for (i = 0; i < ARRAY_SIZE(lvds_data); ++i) {
+			if (lvds_data[i].res.start == res.start)
+				break;
+		}
+
+		if (i == ARRAY_SIZE(lvds_data))
+			continue;
+
+		/* Patch the LVDS encoder. */
+		rcar_du_of_lvds_patch_one(lvds_node, &lvds_data[i].clkspec,
+					  lvds_data[i].local,
+					  lvds_data[i].remote);
+	}
+
+done:
+	for (i = 0; i < info->num_lvds; ++i) {
+		of_node_put(lvds_data[i].clkspec.np);
+		of_node_put(lvds_data[i].local);
+		of_node_put(lvds_data[i].remote);
+	}
+
+	of_node_put(soc_node);
+	of_node_put(du_node);
+}
+
+void __init rcar_du_of_init(const struct of_device_id *of_ids)
+{
+	rcar_du_of_lvds_patch(of_ids);
+}
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of.h b/drivers/gpu/drm/rcar-du/rcar_du_of.h
new file mode 100644
index 000000000000..c2e65a727e91
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * rcar_du_of.h - Legacy DT bindings compatibility
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+#ifndef __RCAR_DU_OF_H__
+#define __RCAR_DU_OF_H__
+
+#include <linux/init.h>
+
+struct of_device_id;
+
+#ifdef CONFIG_DRM_RCAR_LVDS
+void __init rcar_du_of_init(const struct of_device_id *of_ids);
+#else
+static inline void rcar_du_of_init(const struct of_device_id *of_ids) { }
+#endif /* CONFIG_DRM_RCAR_LVDS */
+
+#endif /* __RCAR_DU_OF_H__ */
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts
new file mode 100644
index 000000000000..f118a6ae7782
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of_lvds_r8a7790.dts - Legacy LVDS DT bindings conversion for R8A7790
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+/dts-v1/;
+/plugin/;
+/ {
+	fragment@0 {
+		target-path = "/";
+		__overlay__ {
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			lvds@feb90000 {
+				compatible = "renesas,r8a7790-lvds";
+				reg = <0 0xfeb90000 0 0x1c>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds0_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			lvds@feb94000 {
+				compatible = "renesas,r8a7790-lvds";
+				reg = <0 0xfeb94000 0 0x1c>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds1_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds1_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target-path = "/display@feb00000/ports";
+		__overlay__ {
+			port@1 {
+				endpoint {
+					remote-endpoint = <&lvds0_input>;
+				};
+			};
+			port@2 {
+				endpoint {
+					remote-endpoint = <&lvds1_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts
new file mode 100644
index 000000000000..7d865727928c
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of_lvds_r8a7791.dts - Legacy LVDS DT bindings conversion for R8A7791
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+/dts-v1/;
+/plugin/;
+/ {
+	fragment@0 {
+		target-path = "/";
+		__overlay__ {
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			lvds@feb90000 {
+				compatible = "renesas,r8a7791-lvds";
+				reg = <0 0xfeb90000 0 0x1c>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds0_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target-path = "/display@feb00000/ports";
+		__overlay__ {
+			port@1 {
+				endpoint {
+					remote-endpoint = <&lvds0_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts
new file mode 100644
index 000000000000..bb263711834d
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of_lvds_r8a7793.dts - Legacy LVDS DT bindings conversion for R8A7793
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+/dts-v1/;
+/plugin/;
+/ {
+	fragment@0 {
+		target-path = "/";
+		__overlay__ {
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			lvds@feb90000 {
+				compatible = "renesas,r8a7793-lvds";
+				reg = <0 0xfeb90000 0 0x1c>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds0_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target-path = "/display@feb00000/ports";
+		__overlay__ {
+			port@1 {
+				endpoint {
+					remote-endpoint = <&lvds0_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts
new file mode 100644
index 000000000000..9bbf7c9e5ce4
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of_lvds_r8a7795.dts - Legacy LVDS DT bindings conversion for R8A7795
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+/dts-v1/;
+/plugin/;
+/ {
+	fragment@0 {
+		target-path = "/soc";
+		__overlay__ {
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			lvds@feb90000 {
+				compatible = "renesas,r8a7795-lvds";
+				reg = <0 0xfeb90000 0 0x14>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds0_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target-path = "/soc/display@feb00000/ports";
+		__overlay__ {
+			port@3 {
+				endpoint {
+					remote-endpoint = <&lvds0_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts
new file mode 100644
index 000000000000..d16f3e9e08ab
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of_lvds_r8a7796.dts - Legacy LVDS DT bindings conversion for R8A7796
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+/dts-v1/;
+/plugin/;
+/ {
+	fragment@0 {
+		target-path = "/soc";
+		__overlay__ {
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			lvds@feb90000 {
+				compatible = "renesas,r8a7796-lvds";
+				reg = <0 0xfeb90000 0 0x14>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds0_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target-path = "/soc/display@feb00000/ports";
+		__overlay__ {
+			port@3 {
+				endpoint {
+					remote-endpoint = <&lvds0_input>;
+				};
+			};
+		};
+	};
+};
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v5 7/8] drm: rcar-du: Fix legacy DT to create LVDS encoder nodes

[Laurent Pinchart]

The internal LVDS encoders now have their own DT bindings. Before
switching the driver infrastructure to those new bindings, implement
backward-compatibility through live DT patching.

Patching is disabled and will be enabled along with support for the new
DT bindings in the DU driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
Changes since v3:

- Use the OF changeset API
- Use of_graph_get_endpoint_by_regs()
- Replace hardcoded constants by sizeof()

Changes since v2:

- Update the SPDX headers to use C-style comments in header files
- Removed the manually created __local_fixups__ node
- Perform manual fixups on live DT instead of overlay

Changes since v1:

- Select OF_FLATTREE
- Compile LVDS DT bindings patch code when DRM_RCAR_LVDS is selected
- Update the SPDX headers to use GPL-2.0 instead of GPL-2.0-only
- Turn __dtb_rcar_du_of_lvds_(begin|end) from u8 to char
- Pass void begin and end pointers to rcar_du_of_get_overlay()
- Use of_get_parent() instead of accessing the parent pointer directly
- Find the LVDS endpoints nodes based on the LVDS node instead of the
  root of the overlay
- Update to the <soc>-lvds compatible string format
---
 drivers/gpu/drm/rcar-du/Kconfig                    |   2 +
 drivers/gpu/drm/rcar-du/Makefile                   |   7 +-
 drivers/gpu/drm/rcar-du/rcar_du_of.c               | 307 +++++++++++++++++++++
 drivers/gpu/drm/rcar-du/rcar_du_of.h               |  20 ++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts    |  79 ++++++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts    |  53 ++++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts    |  53 ++++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts    |  53 ++++
 .../gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts    |  53 ++++
 9 files changed, 626 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of.c
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of.h
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts

diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
index 5d0b4b7119af..3f83352a7313 100644
--- a/drivers/gpu/drm/rcar-du/Kconfig
+++ b/drivers/gpu/drm/rcar-du/Kconfig
@@ -22,6 +22,8 @@ config DRM_RCAR_LVDS
 	bool "R-Car DU LVDS Encoder Support"
 	depends on DRM_RCAR_DU
 	select DRM_PANEL
+	select OF_FLATTREE
+	select OF_OVERLAY
 	help
 	  Enable support for the R-Car Display Unit embedded LVDS encoders.
 
diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile
index 0cf5c11030e8..86b337b4be5d 100644
--- a/drivers/gpu/drm/rcar-du/Makefile
+++ b/drivers/gpu/drm/rcar-du/Makefile
@@ -8,7 +8,12 @@ rcar-du-drm-y := rcar_du_crtc.o \
 		 rcar_du_plane.o
 
 rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_lvdsenc.o
-
+rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_of.o \
+					   rcar_du_of_lvds_r8a7790.dtb.o \
+					   rcar_du_of_lvds_r8a7791.dtb.o \
+					   rcar_du_of_lvds_r8a7793.dtb.o \
+					   rcar_du_of_lvds_r8a7795.dtb.o \
+					   rcar_du_of_lvds_r8a7796.dtb.o
 rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o
 
 obj-$(CONFIG_DRM_RCAR_DU)		+= rcar-du-drm.o
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of.c b/drivers/gpu/drm/rcar-du/rcar_du_of.c
new file mode 100644
index 000000000000..12fae8814309
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of.c - Legacy DT bindings compatibility
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_graph.h>
+#include <linux/slab.h>
+
+#include "rcar_du_crtc.h"
+#include "rcar_du_drv.h"
+
+/* -----------------------------------------------------------------------------
+ * Generic Overlay Handling
+ */
+
+struct rcar_du_of_overlay {
+	const char *compatible;
+	void *begin;
+	void *end;
+};
+
+#define RCAR_DU_OF_DTB(type, soc)					\
+	extern char __dtb_rcar_du_of_##type##_##soc##_begin[];		\
+	extern char __dtb_rcar_du_of_##type##_##soc##_end[]
+
+#define RCAR_DU_OF_OVERLAY(type, soc)					\
+	{								\
+		.compatible = "renesas,du-" #soc,			\
+		.begin = __dtb_rcar_du_of_##type##_##soc##_begin,	\
+		.end = __dtb_rcar_du_of_##type##_##soc##_end,		\
+	}
+
+static int __init rcar_du_of_apply_overlay(const struct rcar_du_of_overlay *dtbs,
+					   const char *compatible)
+{
+	const struct rcar_du_of_overlay *dtb = NULL;
+	struct device_node *node = NULL;
+	unsigned int i;
+	int ovcs_id;
+	void *data;
+	void *mem;
+	int ret;
+
+	for (i = 0; dtbs[i].compatible; ++i) {
+		if (!strcmp(dtbs[i].compatible, compatible)) {
+			dtb = &dtbs[i];
+			break;
+		}
+	}
+
+	if (!dtb)
+		return -ENODEV;
+
+	data = kmemdup(dtb->begin, dtb->end - dtb->begin, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	mem = of_fdt_unflatten_tree(data, NULL, &node);
+	if (!mem) {
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	ovcs_id = 0;
+	ret = of_overlay_apply(node, &ovcs_id);
+
+done:
+	of_node_put(node);
+	kfree(data);
+	kfree(mem);
+
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * LVDS Overlays
+ */
+
+RCAR_DU_OF_DTB(lvds, r8a7790);
+RCAR_DU_OF_DTB(lvds, r8a7791);
+RCAR_DU_OF_DTB(lvds, r8a7793);
+RCAR_DU_OF_DTB(lvds, r8a7795);
+RCAR_DU_OF_DTB(lvds, r8a7796);
+
+static const struct rcar_du_of_overlay rcar_du_lvds_overlays[] __initconst = {
+	RCAR_DU_OF_OVERLAY(lvds, r8a7790),
+	RCAR_DU_OF_OVERLAY(lvds, r8a7791),
+	RCAR_DU_OF_OVERLAY(lvds, r8a7793),
+	RCAR_DU_OF_OVERLAY(lvds, r8a7795),
+	RCAR_DU_OF_OVERLAY(lvds, r8a7796),
+	{ /* Sentinel */ },
+};
+
+static struct of_changeset rcar_du_lvds_changeset;
+
+static void __init rcar_du_of_lvds_patch_one(struct device_node *lvds,
+					     const struct of_phandle_args *clk,
+					     struct device_node *local,
+					     struct device_node *remote)
+{
+	unsigned int psize;
+	unsigned int i;
+	__be32 value[4];
+	int ret;
+
+	/*
+	 * Set the LVDS clocks property. This can't be performed by the overlay
+	 * as the structure of the clock specifier has changed over time, and we
+	 * don't know at compile time which binding version the system we will
+	 * run on uses.
+	 */
+	if (clk->args_count >= ARRAY_SIZE(value) - 1)
+		return;
+
+	of_changeset_init(&rcar_du_lvds_changeset);
+
+	value[0] = cpu_to_be32(clk->np->phandle);
+	for (i = 0; i < clk->args_count; ++i)
+		value[i + 1] = cpu_to_be32(clk->args[i]);
+
+	psize = (clk->args_count + 1) * 4;
+	ret = of_changeset_add_property_copy(&rcar_du_lvds_changeset, lvds,
+					     "clocks", value, psize);
+	if (ret < 0)
+		goto done;
+
+	/*
+	 * Insert the node in the OF graph: patch the LVDS ports remote-endpoint
+	 * properties to point to the endpoints of the sibling nodes in the
+	 * graph. This can't be performed by the overlay: on the input side the
+	 * overlay would contain a phandle for the DU LVDS output port that
+	 * would clash with the system DT, and on the output side the connection
+	 * is board-specific.
+	 */
+	value[0] = cpu_to_be32(local->phandle);
+	value[1] = cpu_to_be32(remote->phandle);
+
+	for (i = 0; i < 2; ++i) {
+		struct device_node *endpoint;
+
+		endpoint = of_graph_get_endpoint_by_regs(lvds, i, 0);
+		if (!endpoint) {
+			ret = -EINVAL;
+			goto done;
+		}
+
+		ret = of_changeset_add_property_copy(&rcar_du_lvds_changeset,
+						endpoint, "remote-endpoint",
+						&value[i], sizeof(value[i]));
+		of_node_put(endpoint);
+		if (ret < 0)
+			goto done;
+	}
+
+	ret = of_changeset_apply(&rcar_du_lvds_changeset);
+
+done:
+	if (ret < 0)
+		of_changeset_destroy(&rcar_du_lvds_changeset);
+}
+
+struct lvds_of_data {
+	struct resource res;
+	struct of_phandle_args clkspec;
+	struct device_node *local;
+	struct device_node *remote;
+};
+
+static void __init rcar_du_of_lvds_patch(const struct of_device_id *of_ids)
+{
+	const struct rcar_du_device_info *info;
+	const struct of_device_id *match;
+	struct lvds_of_data lvds_data[2] = { };
+	struct device_node *lvds_node;
+	struct device_node *soc_node;
+	struct device_node *du_node;
+	char compatible[21];
+	const char *soc_name;
+	unsigned int i;
+	int ret;
+
+	/* Get the DU node and exit if not present or disabled. */
+	du_node = of_find_matching_node_and_match(NULL, of_ids, &match);
+	if (!du_node || !of_device_is_available(du_node)) {
+		of_node_put(du_node);
+		return;
+	}
+
+	info = match->data;
+	soc_node = of_get_parent(du_node);
+
+	if (WARN_ON(info->num_lvds > ARRAY_SIZE(lvds_data)))
+		goto done;
+
+	/*
+	 * Skip if the LVDS nodes already exists.
+	 *
+	 * The nodes are searched based on the compatible string, which we
+	 * construct from the SoC name found in the DU compatible string. As a
+	 * match has been found we know the compatible string matches the
+	 * expected format and can thus skip some of the string manipulation
+	 * normal safety checks.
+	 */
+	soc_name = strchr(match->compatible, '-') + 1;
+	sprintf(compatible, "renesas,%s-lvds", soc_name);
+	lvds_node = of_find_compatible_node(NULL, NULL, compatible);
+	if (lvds_node) {
+		of_node_put(lvds_node);
+		return;
+	}
+
+	/*
+	 * Parse the DU node and store the register specifier, the clock
+	 * specifier and the local and remote endpoint of the LVDS link for
+	 * later use.
+	 */
+	for (i = 0; i < info->num_lvds; ++i) {
+		struct lvds_of_data *lvds = &lvds_data[i];
+		unsigned int port;
+		char name[7];
+		int index;
+
+		sprintf(name, "lvds.%u", i);
+		index = of_property_match_string(du_node, "clock-names", name);
+		if (index < 0)
+			continue;
+
+		ret = of_parse_phandle_with_args(du_node, "clocks",
+						 "#clock-cells", index,
+						 &lvds->clkspec);
+		if (ret < 0)
+			continue;
+
+		port = info->routes[RCAR_DU_OUTPUT_LVDS0 + i].port;
+
+		lvds->local = of_graph_get_endpoint_by_regs(du_node, port, 0);
+		if (!lvds->local)
+			continue;
+
+		lvds->remote = of_graph_get_remote_endpoint(lvds->local);
+		if (!lvds->remote)
+			continue;
+
+		index = of_property_match_string(du_node, "reg-names", name);
+		if (index < 0)
+			continue;
+
+		of_address_to_resource(du_node, index, &lvds->res);
+	}
+
+	/* Parse and apply the overlay. This will resolve phandles. */
+	ret = rcar_du_of_apply_overlay(rcar_du_lvds_overlays,
+				       match->compatible);
+	if (ret < 0)
+		goto done;
+
+	/* Patch the newly created LVDS encoder nodes. */
+	for_each_child_of_node(soc_node, lvds_node) {
+		struct resource res;
+
+		if (!of_device_is_compatible(lvds_node, compatible))
+			continue;
+
+		/* Locate the lvds_data entry based on the resource start. */
+		ret = of_address_to_resource(lvds_node, 0, &res);
+		if (ret < 0)
+			continue;
+
+		for (i = 0; i < ARRAY_SIZE(lvds_data); ++i) {
+			if (lvds_data[i].res.start == res.start)
+				break;
+		}
+
+		if (i == ARRAY_SIZE(lvds_data))
+			continue;
+
+		/* Patch the LVDS encoder. */
+		rcar_du_of_lvds_patch_one(lvds_node, &lvds_data[i].clkspec,
+					  lvds_data[i].local,
+					  lvds_data[i].remote);
+	}
+
+done:
+	for (i = 0; i < info->num_lvds; ++i) {
+		of_node_put(lvds_data[i].clkspec.np);
+		of_node_put(lvds_data[i].local);
+		of_node_put(lvds_data[i].remote);
+	}
+
+	of_node_put(soc_node);
+	of_node_put(du_node);
+}
+
+void __init rcar_du_of_init(const struct of_device_id *of_ids)
+{
+	rcar_du_of_lvds_patch(of_ids);
+}
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of.h b/drivers/gpu/drm/rcar-du/rcar_du_of.h
new file mode 100644
index 000000000000..c2e65a727e91
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * rcar_du_of.h - Legacy DT bindings compatibility
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+#ifndef __RCAR_DU_OF_H__
+#define __RCAR_DU_OF_H__
+
+#include <linux/init.h>
+
+struct of_device_id;
+
+#ifdef CONFIG_DRM_RCAR_LVDS
+void __init rcar_du_of_init(const struct of_device_id *of_ids);
+#else
+static inline void rcar_du_of_init(const struct of_device_id *of_ids) { }
+#endif /* CONFIG_DRM_RCAR_LVDS */
+
+#endif /* __RCAR_DU_OF_H__ */
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts
new file mode 100644
index 000000000000..f118a6ae7782
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of_lvds_r8a7790.dts - Legacy LVDS DT bindings conversion for R8A7790
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+/dts-v1/;
+/plugin/;
+/ {
+	fragment@0 {
+		target-path = "/";
+		__overlay__ {
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			lvds@feb90000 {
+				compatible = "renesas,r8a7790-lvds";
+				reg = <0 0xfeb90000 0 0x1c>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds0_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			lvds@feb94000 {
+				compatible = "renesas,r8a7790-lvds";
+				reg = <0 0xfeb94000 0 0x1c>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds1_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds1_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target-path = "/display@feb00000/ports";
+		__overlay__ {
+			port@1 {
+				endpoint {
+					remote-endpoint = <&lvds0_input>;
+				};
+			};
+			port@2 {
+				endpoint {
+					remote-endpoint = <&lvds1_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts
new file mode 100644
index 000000000000..7d865727928c
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of_lvds_r8a7791.dts - Legacy LVDS DT bindings conversion for R8A7791
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+/dts-v1/;
+/plugin/;
+/ {
+	fragment@0 {
+		target-path = "/";
+		__overlay__ {
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			lvds@feb90000 {
+				compatible = "renesas,r8a7791-lvds";
+				reg = <0 0xfeb90000 0 0x1c>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds0_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target-path = "/display@feb00000/ports";
+		__overlay__ {
+			port@1 {
+				endpoint {
+					remote-endpoint = <&lvds0_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts
new file mode 100644
index 000000000000..bb263711834d
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of_lvds_r8a7793.dts - Legacy LVDS DT bindings conversion for R8A7793
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+/dts-v1/;
+/plugin/;
+/ {
+	fragment@0 {
+		target-path = "/";
+		__overlay__ {
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			lvds@feb90000 {
+				compatible = "renesas,r8a7793-lvds";
+				reg = <0 0xfeb90000 0 0x1c>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds0_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target-path = "/display@feb00000/ports";
+		__overlay__ {
+			port@1 {
+				endpoint {
+					remote-endpoint = <&lvds0_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts
new file mode 100644
index 000000000000..9bbf7c9e5ce4
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of_lvds_r8a7795.dts - Legacy LVDS DT bindings conversion for R8A7795
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+/dts-v1/;
+/plugin/;
+/ {
+	fragment@0 {
+		target-path = "/soc";
+		__overlay__ {
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			lvds@feb90000 {
+				compatible = "renesas,r8a7795-lvds";
+				reg = <0 0xfeb90000 0 0x14>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds0_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target-path = "/soc/display@feb00000/ports";
+		__overlay__ {
+			port@3 {
+				endpoint {
+					remote-endpoint = <&lvds0_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts
new file mode 100644
index 000000000000..d16f3e9e08ab
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_du_of_lvds_r8a7796.dts - Legacy LVDS DT bindings conversion for R8A7796
+ *
+ * Copyright (C) 2018 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * Based on work from Jyri Sarha <jsarha@ti.com>
+ * Copyright (C) 2015 Texas Instruments
+ */
+
+/dts-v1/;
+/plugin/;
+/ {
+	fragment@0 {
+		target-path = "/soc";
+		__overlay__ {
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			lvds@feb90000 {
+				compatible = "renesas,r8a7796-lvds";
+				reg = <0 0xfeb90000 0 0x14>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						lvds0_input: endpoint {
+						};
+					};
+					port@1 {
+						reg = <1>;
+						lvds0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target-path = "/soc/display@feb00000/ports";
+		__overlay__ {
+			port@3 {
+				endpoint {
+					remote-endpoint = <&lvds0_input>;
+				};
+			};
+		};
+	};
+};
-- 
Regards,

Laurent Pinchart

[PATCH v5 8/8] drm: rcar-du: Convert LVDS encoder code to bridge driver

[Laurent Pinchart]

The LVDS encoders used to be described in DT as part of the DU. They now
have their own DT node, linked to the DU using the OF graph bindings.
This allows moving internal LVDS encoder support to a separate driver
modelled as a DRM bridge. Backward compatibility is retained as legacy
DT is patched live to move to the new bindings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
Changes since v1:

- Update the SPDX headers to use GPL-2.0 instead of GPL-2.0-only
- Update to the <soc>-lvds compatible string format
---
 drivers/gpu/drm/rcar-du/Kconfig           |   4 +-
 drivers/gpu/drm/rcar-du/Makefile          |   3 +-
 drivers/gpu/drm/rcar-du/rcar_du_drv.c     |  21 +-
 drivers/gpu/drm/rcar-du/rcar_du_drv.h     |   5 -
 drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 175 +---------
 drivers/gpu/drm/rcar-du/rcar_du_encoder.h |  12 -
 drivers/gpu/drm/rcar-du/rcar_du_kms.c     |  14 +-
 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c |  93 ------
 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h |  24 --
 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 238 --------------
 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h |  64 ----
 drivers/gpu/drm/rcar-du/rcar_lvds.c       | 524 ++++++++++++++++++++++++++++++
 12 files changed, 561 insertions(+), 616 deletions(-)
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_lvds.c

diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
index 3f83352a7313..edde8d4b87a3 100644
--- a/drivers/gpu/drm/rcar-du/Kconfig
+++ b/drivers/gpu/drm/rcar-du/Kconfig
@@ -19,8 +19,8 @@ config DRM_RCAR_DW_HDMI
 	  Enable support for R-Car Gen3 internal HDMI encoder.
 
 config DRM_RCAR_LVDS
-	bool "R-Car DU LVDS Encoder Support"
-	depends on DRM_RCAR_DU
+	tristate "R-Car DU LVDS Encoder Support"
+	depends on DRM && DRM_BRIDGE && OF
 	select DRM_PANEL
 	select OF_FLATTREE
 	select OF_OVERLAY
diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile
index 86b337b4be5d..3e58ed93d5b1 100644
--- a/drivers/gpu/drm/rcar-du/Makefile
+++ b/drivers/gpu/drm/rcar-du/Makefile
@@ -4,10 +4,8 @@ rcar-du-drm-y := rcar_du_crtc.o \
 		 rcar_du_encoder.o \
 		 rcar_du_group.o \
 		 rcar_du_kms.o \
-		 rcar_du_lvdscon.o \
 		 rcar_du_plane.o
 
-rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_lvdsenc.o
 rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_of.o \
 					   rcar_du_of_lvds_r8a7790.dtb.o \
 					   rcar_du_of_lvds_r8a7791.dtb.o \
@@ -18,3 +16,4 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o
 
 obj-$(CONFIG_DRM_RCAR_DU)		+= rcar-du-drm.o
 obj-$(CONFIG_DRM_RCAR_DW_HDMI)		+= rcar_dw_hdmi.o
+obj-$(CONFIG_DRM_RCAR_LVDS)		+= rcar_lvds.o
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 6e02c762a557..06a3fbdd728a 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -29,6 +29,7 @@
 
 #include "rcar_du_drv.h"
 #include "rcar_du_kms.h"
+#include "rcar_du_of.h"
 #include "rcar_du_regs.h"
 
 /* -----------------------------------------------------------------------------
@@ -74,7 +75,6 @@ static const struct rcar_du_device_info rzg1_du_r8a7745_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7779_info = {
@@ -95,14 +95,13 @@ static const struct rcar_du_device_info rcar_du_r8a7779_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7790_info = {
 	.gen = 2,
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
-	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
+	.quirks = RCAR_DU_QUIRK_ALIGN_128B,
 	.num_crtcs = 3,
 	.routes = {
 		/*
@@ -164,7 +163,6 @@ static const struct rcar_du_device_info rcar_du_r8a7792_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7794_info = {
@@ -186,7 +184,6 @@ static const struct rcar_du_device_info rcar_du_r8a7794_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7795_info = {
@@ -434,7 +431,19 @@ static struct platform_driver rcar_du_platform_driver = {
 	},
 };
 
-module_platform_driver(rcar_du_platform_driver);
+static int __init rcar_du_init(void)
+{
+	rcar_du_of_init(rcar_du_of_table);
+
+	return platform_driver_register(&rcar_du_platform_driver);
+}
+module_init(rcar_du_init);
+
+static void __exit rcar_du_exit(void)
+{
+	platform_driver_unregister(&rcar_du_platform_driver);
+}
+module_exit(rcar_du_exit);
 
 MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
 MODULE_DESCRIPTION("Renesas R-Car Display Unit DRM Driver");
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
index f400fde65a0c..5c7ec15818c7 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -26,14 +26,12 @@ struct device;
 struct drm_device;
 struct drm_fbdev_cma;
 struct rcar_du_device;
-struct rcar_du_lvdsenc;
 
 #define RCAR_DU_FEATURE_CRTC_IRQ_CLOCK	(1 << 0)	/* Per-CRTC IRQ and clock */
 #define RCAR_DU_FEATURE_EXT_CTRL_REGS	(1 << 1)	/* Has extended control registers */
 #define RCAR_DU_FEATURE_VSP1_SOURCE	(1 << 2)	/* Has inputs from VSP1 */
 
 #define RCAR_DU_QUIRK_ALIGN_128B	(1 << 0)	/* Align pitches to 128 bytes */
-#define RCAR_DU_QUIRK_LVDS_LANES	(1 << 1)	/* LVDS lanes 1 and 3 inverted */
 
 /*
  * struct rcar_du_output_routing - Output routing specification
@@ -70,7 +68,6 @@ struct rcar_du_device_info {
 
 #define RCAR_DU_MAX_CRTCS		4
 #define RCAR_DU_MAX_GROUPS		DIV_ROUND_UP(RCAR_DU_MAX_CRTCS, 2)
-#define RCAR_DU_MAX_LVDS		2
 #define RCAR_DU_MAX_VSPS		4
 
 struct rcar_du_device {
@@ -96,8 +93,6 @@ struct rcar_du_device {
 
 	unsigned int dpad0_source;
 	unsigned int vspd1_sink;
-
-	struct rcar_du_lvdsenc *lvds[RCAR_DU_MAX_LVDS];
 };
 
 static inline bool rcar_du_has(struct rcar_du_device *rcdu,
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
index ba8d2804c1d1..f9c933d3bae6 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -21,134 +21,22 @@
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
 #include "rcar_du_kms.h"
-#include "rcar_du_lvdscon.h"
-#include "rcar_du_lvdsenc.h"
 
 /* -----------------------------------------------------------------------------
  * Encoder
  */
 
-static void rcar_du_encoder_disable(struct drm_encoder *encoder)
-{
-	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-
-	if (renc->connector && renc->connector->panel) {
-		drm_panel_disable(renc->connector->panel);
-		drm_panel_unprepare(renc->connector->panel);
-	}
-
-	if (renc->lvds)
-		rcar_du_lvdsenc_enable(renc->lvds, encoder->crtc, false);
-}
-
-static void rcar_du_encoder_enable(struct drm_encoder *encoder)
-{
-	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-
-	if (renc->lvds)
-		rcar_du_lvdsenc_enable(renc->lvds, encoder->crtc, true);
-
-	if (renc->connector && renc->connector->panel) {
-		drm_panel_prepare(renc->connector->panel);
-		drm_panel_enable(renc->connector->panel);
-	}
-}
-
-static int rcar_du_encoder_atomic_check(struct drm_encoder *encoder,
-					struct drm_crtc_state *crtc_state,
-					struct drm_connector_state *conn_state)
-{
-	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
-	const struct drm_display_mode *mode = &crtc_state->mode;
-	struct drm_connector *connector = conn_state->connector;
-	struct drm_device *dev = encoder->dev;
-
-	/*
-	 * Only panel-related encoder types require validation here, everything
-	 * else is handled by the bridge drivers.
-	 */
-	if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS) {
-		const struct drm_display_mode *panel_mode;
-
-		if (list_empty(&connector->modes)) {
-			dev_dbg(dev->dev, "encoder: empty modes list\n");
-			return -EINVAL;
-		}
-
-		panel_mode = list_first_entry(&connector->modes,
-					      struct drm_display_mode, head);
-
-		/* We're not allowed to modify the resolution. */
-		if (mode->hdisplay != panel_mode->hdisplay ||
-		    mode->vdisplay != panel_mode->vdisplay)
-			return -EINVAL;
-
-		/*
-		 * The flat panel mode is fixed, just copy it to the adjusted
-		 * mode.
-		 */
-		drm_mode_copy(adjusted_mode, panel_mode);
-	}
-
-	if (renc->lvds)
-		rcar_du_lvdsenc_atomic_check(renc->lvds, adjusted_mode);
-
-	return 0;
-}
-
 static void rcar_du_encoder_mode_set(struct drm_encoder *encoder,
 				     struct drm_crtc_state *crtc_state,
 				     struct drm_connector_state *conn_state)
 {
 	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-	struct drm_display_info *info = &conn_state->connector->display_info;
-	enum rcar_lvds_mode mode;
 
 	rcar_du_crtc_route_output(crtc_state->crtc, renc->output);
-
-	if (!renc->lvds) {
-		/*
-		 * The DU driver creates connectors only for the outputs of the
-		 * internal LVDS encoders.
-		 */
-		renc->connector = NULL;
-		return;
-	}
-
-	renc->connector = to_rcar_connector(conn_state->connector);
-
-	if (!info->num_bus_formats || !info->bus_formats) {
-		dev_err(encoder->dev->dev, "no LVDS bus format reported\n");
-		return;
-	}
-
-	switch (info->bus_formats[0]) {
-	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
-	case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
-		mode = RCAR_LVDS_MODE_JEIDA;
-		break;
-	case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
-		mode = RCAR_LVDS_MODE_VESA;
-		break;
-	default:
-		dev_err(encoder->dev->dev,
-			"unsupported LVDS bus format 0x%04x\n",
-			info->bus_formats[0]);
-		return;
-	}
-
-	if (info->bus_flags & DRM_BUS_FLAG_DATA_LSB_TO_MSB)
-		mode |= RCAR_LVDS_MODE_MIRROR;
-
-	rcar_du_lvdsenc_set_mode(renc->lvds, mode);
 }
 
 static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
 	.atomic_mode_set = rcar_du_encoder_mode_set,
-	.disable = rcar_du_encoder_disable,
-	.enable = rcar_du_encoder_enable,
-	.atomic_check = rcar_du_encoder_atomic_check,
 };
 
 static const struct drm_encoder_funcs encoder_funcs = {
@@ -172,33 +60,14 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 	renc->output = output;
 	encoder = rcar_encoder_to_drm_encoder(renc);
 
-	switch (output) {
-	case RCAR_DU_OUTPUT_LVDS0:
-		renc->lvds = rcdu->lvds[0];
-		break;
+	dev_dbg(rcdu->dev, "initializing encoder %pOF for output %u\n",
+		enc_node, output);
 
-	case RCAR_DU_OUTPUT_LVDS1:
-		renc->lvds = rcdu->lvds[1];
-		break;
-
-	default:
-		break;
-	}
-
-	if (enc_node) {
-		dev_dbg(rcdu->dev, "initializing encoder %pOF for output %u\n",
-			enc_node, output);
-
-		/* Locate the DRM bridge from the encoder DT node. */
-		bridge = of_drm_find_bridge(enc_node);
-		if (!bridge) {
-			ret = -EPROBE_DEFER;
-			goto done;
-		}
-	} else {
-		dev_dbg(rcdu->dev,
-			"initializing internal encoder for output %u\n",
-			output);
+	/* Locate the DRM bridge from the encoder DT node. */
+	bridge = of_drm_find_bridge(enc_node);
+	if (!bridge) {
+		ret = -EPROBE_DEFER;
+		goto done;
 	}
 
 	ret = drm_encoder_init(rcdu->ddev, encoder, &encoder_funcs,
@@ -208,28 +77,14 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 
 	drm_encoder_helper_add(encoder, &encoder_helper_funcs);
 
-	if (bridge) {
-		/*
-		 * Attach the bridge to the encoder. The bridge will create the
-		 * connector.
-		 */
-		ret = drm_bridge_attach(encoder, bridge, NULL);
-		if (ret) {
-			drm_encoder_cleanup(encoder);
-			return ret;
-		}
-	} else {
-		/* There's no bridge, create the connector manually. */
-		switch (output) {
-		case RCAR_DU_OUTPUT_LVDS0:
-		case RCAR_DU_OUTPUT_LVDS1:
-			ret = rcar_du_lvds_connector_init(rcdu, renc, con_node);
-			break;
-
-		default:
-			ret = -EINVAL;
-			break;
-		}
+	/*
+	 * Attach the bridge to the encoder. The bridge will create the
+	 * connector.
+	 */
+	ret = drm_bridge_attach(encoder, bridge, NULL);
+	if (ret) {
+		drm_encoder_cleanup(encoder);
+		return ret;
 	}
 
 done:
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.h b/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
index 5422fa4df272..2d2abcacd169 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
@@ -19,13 +19,10 @@
 
 struct drm_panel;
 struct rcar_du_device;
-struct rcar_du_lvdsenc;
 
 struct rcar_du_encoder {
 	struct drm_encoder base;
 	enum rcar_du_output output;
-	struct rcar_du_connector *connector;
-	struct rcar_du_lvdsenc *lvds;
 };
 
 #define to_rcar_encoder(e) \
@@ -33,15 +30,6 @@ struct rcar_du_encoder {
 
 #define rcar_encoder_to_drm_encoder(e)	(&(e)->base)
 
-struct rcar_du_connector {
-	struct drm_connector connector;
-	struct rcar_du_encoder *encoder;
-	struct drm_panel *panel;
-};
-
-#define to_rcar_connector(c) \
-	container_of(c, struct rcar_du_connector, connector)
-
 int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 			 enum rcar_du_output output,
 			 struct device_node *enc_node,
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index 566d1a948c8f..0329b354bfa0 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -27,7 +27,6 @@
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
 #include "rcar_du_kms.h"
-#include "rcar_du_lvdsenc.h"
 #include "rcar_du_regs.h"
 #include "rcar_du_vsp.h"
 
@@ -341,11 +340,10 @@ static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu,
 	of_node_put(entity_ep_node);
 
 	if (!encoder) {
-		/*
-		 * If no encoder has been found the entity must be the
-		 * connector.
-		 */
-		connector = entity;
+		dev_warn(rcdu->dev,
+			 "no encoder found for endpoint %pOF, skipping\n",
+			 ep->local_node);
+		return -ENODEV;
 	}
 
 	ret = rcar_du_encoder_init(rcdu, output, encoder, connector);
@@ -595,10 +593,6 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
 	}
 
 	/* Initialize the encoders. */
-	ret = rcar_du_lvdsenc_init(rcdu);
-	if (ret < 0)
-		return ret;
-
 	ret = rcar_du_encoders_init(rcdu);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c
deleted file mode 100644
index e96f2df0c305..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * rcar_du_lvdscon.c  --  R-Car Display Unit LVDS Connector
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <drm/drmP.h>
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_panel.h>
-
-#include <video/display_timing.h>
-#include <video/of_display_timing.h>
-#include <video/videomode.h>
-
-#include "rcar_du_drv.h"
-#include "rcar_du_encoder.h"
-#include "rcar_du_kms.h"
-#include "rcar_du_lvdscon.h"
-
-static int rcar_du_lvds_connector_get_modes(struct drm_connector *connector)
-{
-	struct rcar_du_connector *rcon = to_rcar_connector(connector);
-
-	return drm_panel_get_modes(rcon->panel);
-}
-
-static const struct drm_connector_helper_funcs connector_helper_funcs = {
-	.get_modes = rcar_du_lvds_connector_get_modes,
-};
-
-static void rcar_du_lvds_connector_destroy(struct drm_connector *connector)
-{
-	struct rcar_du_connector *rcon = to_rcar_connector(connector);
-
-	drm_panel_detach(rcon->panel);
-	drm_connector_cleanup(connector);
-}
-
-static const struct drm_connector_funcs connector_funcs = {
-	.reset = drm_atomic_helper_connector_reset,
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.destroy = rcar_du_lvds_connector_destroy,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-int rcar_du_lvds_connector_init(struct rcar_du_device *rcdu,
-				struct rcar_du_encoder *renc,
-				const struct device_node *np)
-{
-	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(renc);
-	struct rcar_du_connector *rcon;
-	struct drm_connector *connector;
-	int ret;
-
-	rcon = devm_kzalloc(rcdu->dev, sizeof(*rcon), GFP_KERNEL);
-	if (rcon == NULL)
-		return -ENOMEM;
-
-	connector = &rcon->connector;
-
-	rcon->panel = of_drm_find_panel(np);
-	if (!rcon->panel)
-		return -EPROBE_DEFER;
-
-	ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs,
-				 DRM_MODE_CONNECTOR_LVDS);
-	if (ret < 0)
-		return ret;
-
-	drm_connector_helper_add(connector, &connector_helper_funcs);
-
-	ret = drm_mode_connector_attach_encoder(connector, encoder);
-	if (ret < 0)
-		return ret;
-
-	ret = drm_panel_attach(rcon->panel, connector);
-	if (ret < 0)
-		return ret;
-
-	rcon->encoder = renc;
-
-	return 0;
-}
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h b/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h
deleted file mode 100644
index 639071dd235c..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * rcar_du_lvdscon.h  --  R-Car Display Unit LVDS Connector
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __RCAR_DU_LVDSCON_H__
-#define __RCAR_DU_LVDSCON_H__
-
-struct rcar_du_device;
-struct rcar_du_encoder;
-
-int rcar_du_lvds_connector_init(struct rcar_du_device *rcdu,
-				struct rcar_du_encoder *renc,
-				const struct device_node *np);
-
-#endif /* __RCAR_DU_LVDSCON_H__ */
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
deleted file mode 100644
index 4defa8123eb2..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * rcar_du_lvdsenc.c  --  R-Car Display Unit LVDS Encoder
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include "rcar_du_drv.h"
-#include "rcar_du_encoder.h"
-#include "rcar_du_lvdsenc.h"
-#include "rcar_lvds_regs.h"
-
-struct rcar_du_lvdsenc {
-	struct rcar_du_device *dev;
-
-	unsigned int index;
-	void __iomem *mmio;
-	struct clk *clock;
-	bool enabled;
-
-	enum rcar_lvds_input input;
-	enum rcar_lvds_mode mode;
-};
-
-static void rcar_lvds_write(struct rcar_du_lvdsenc *lvds, u32 reg, u32 data)
-{
-	iowrite32(data, lvds->mmio + reg);
-}
-
-static u32 rcar_lvds_lvdpllcr_gen2(unsigned int freq)
-{
-	if (freq < 39000)
-		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
-	else if (freq < 61000)
-		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
-	else if (freq < 121000)
-		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
-	else
-		return LVDPLLCR_PLLDLYCNT_150M;
-}
-
-static u32 rcar_lvds_lvdpllcr_gen3(unsigned int freq)
-{
-	if (freq < 42000)
-		return LVDPLLCR_PLLDIVCNT_42M;
-	else if (freq < 85000)
-		return LVDPLLCR_PLLDIVCNT_85M;
-	else if (freq < 128000)
-		return LVDPLLCR_PLLDIVCNT_128M;
-	else
-		return LVDPLLCR_PLLDIVCNT_148M;
-}
-
-static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds,
-				 struct rcar_du_crtc *rcrtc)
-{
-	const struct drm_display_mode *mode = &rcrtc->crtc.mode;
-	u32 lvdpllcr;
-	u32 lvdhcr;
-	u32 lvdcr0;
-	int ret;
-
-	if (lvds->enabled)
-		return 0;
-
-	ret = clk_prepare_enable(lvds->clock);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Hardcode the channels and control signals routing for now.
-	 *
-	 * HSYNC -> CTRL0
-	 * VSYNC -> CTRL1
-	 * DISP  -> CTRL2
-	 * 0     -> CTRL3
-	 */
-	rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO |
-			LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC |
-			LVDCTRCR_CTR0SEL_HSYNC);
-
-	if (rcar_du_needs(lvds->dev, RCAR_DU_QUIRK_LVDS_LANES))
-		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3)
-		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1);
-	else
-		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1)
-		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3);
-
-	rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
-
-	/* PLL clock configuration. */
-	if (lvds->dev->info->gen < 3)
-		lvdpllcr = rcar_lvds_lvdpllcr_gen2(mode->clock);
-	else
-		lvdpllcr = rcar_lvds_lvdpllcr_gen3(mode->clock);
-	rcar_lvds_write(lvds, LVDPLLCR, lvdpllcr);
-
-	/* Set the LVDS mode and select the input. */
-	lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT;
-	if (rcrtc->index == 2)
-		lvdcr0 |= LVDCR0_DUSEL;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-
-	/* Turn all the channels on. */
-	rcar_lvds_write(lvds, LVDCR1,
-			LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
-			LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
-
-	if (lvds->dev->info->gen < 3) {
-		/* Enable LVDS operation and turn the bias circuitry on. */
-		lvdcr0 |= LVDCR0_BEN | LVDCR0_LVEN;
-		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-	}
-
-	/* Turn the PLL on. */
-	lvdcr0 |= LVDCR0_PLLON;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-
-	if (lvds->dev->info->gen > 2) {
-		/* Set LVDS normal mode. */
-		lvdcr0 |= LVDCR0_PWD;
-		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-	}
-
-	/* Wait for the startup delay. */
-	usleep_range(100, 150);
-
-	/* Turn the output on. */
-	lvdcr0 |= LVDCR0_LVRES;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-
-	lvds->enabled = true;
-
-	return 0;
-}
-
-static void rcar_du_lvdsenc_stop(struct rcar_du_lvdsenc *lvds)
-{
-	if (!lvds->enabled)
-		return;
-
-	rcar_lvds_write(lvds, LVDCR0, 0);
-	rcar_lvds_write(lvds, LVDCR1, 0);
-
-	clk_disable_unprepare(lvds->clock);
-
-	lvds->enabled = false;
-}
-
-int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds, struct drm_crtc *crtc,
-			   bool enable)
-{
-	if (!enable) {
-		rcar_du_lvdsenc_stop(lvds);
-		return 0;
-	} else if (crtc) {
-		struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
-		return rcar_du_lvdsenc_start(lvds, rcrtc);
-	} else
-		return -EINVAL;
-}
-
-void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
-				  struct drm_display_mode *mode)
-{
-	/*
-	 * The internal LVDS encoder has a restricted clock frequency operating
-	 * range (31MHz to 148.5MHz). Clamp the clock accordingly.
-	 */
-	mode->clock = clamp(mode->clock, 31000, 148500);
-}
-
-void rcar_du_lvdsenc_set_mode(struct rcar_du_lvdsenc *lvds,
-			      enum rcar_lvds_mode mode)
-{
-	lvds->mode = mode;
-}
-
-static int rcar_du_lvdsenc_get_resources(struct rcar_du_lvdsenc *lvds,
-					 struct platform_device *pdev)
-{
-	struct resource *mem;
-	char name[7];
-
-	sprintf(name, "lvds.%u", lvds->index);
-
-	mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
-	lvds->mmio = devm_ioremap_resource(&pdev->dev, mem);
-	if (IS_ERR(lvds->mmio))
-		return PTR_ERR(lvds->mmio);
-
-	lvds->clock = devm_clk_get(&pdev->dev, name);
-	if (IS_ERR(lvds->clock)) {
-		dev_err(&pdev->dev, "failed to get clock for %s\n", name);
-		return PTR_ERR(lvds->clock);
-	}
-
-	return 0;
-}
-
-int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu)
-{
-	struct platform_device *pdev = to_platform_device(rcdu->dev);
-	struct rcar_du_lvdsenc *lvds;
-	unsigned int i;
-	int ret;
-
-	for (i = 0; i < rcdu->info->num_lvds; ++i) {
-		lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
-		if (lvds == NULL)
-			return -ENOMEM;
-
-		lvds->dev = rcdu;
-		lvds->index = i;
-		lvds->input = i ? RCAR_LVDS_INPUT_DU1 : RCAR_LVDS_INPUT_DU0;
-		lvds->enabled = false;
-
-		ret = rcar_du_lvdsenc_get_resources(lvds, pdev);
-		if (ret < 0)
-			return ret;
-
-		rcdu->lvds[i] = lvds;
-	}
-
-	return 0;
-}
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h
deleted file mode 100644
index 7218ac89333e..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * rcar_du_lvdsenc.h  --  R-Car Display Unit LVDS Encoder
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __RCAR_DU_LVDSENC_H__
-#define __RCAR_DU_LVDSENC_H__
-
-#include <linux/io.h>
-#include <linux/module.h>
-
-struct rcar_drm_crtc;
-struct rcar_du_lvdsenc;
-
-enum rcar_lvds_input {
-	RCAR_LVDS_INPUT_DU0,
-	RCAR_LVDS_INPUT_DU1,
-	RCAR_LVDS_INPUT_DU2,
-};
-
-/* Keep in sync with the LVDCR0.LVMD hardware register values. */
-enum rcar_lvds_mode {
-	RCAR_LVDS_MODE_JEIDA = 0,
-	RCAR_LVDS_MODE_MIRROR = 1,
-	RCAR_LVDS_MODE_VESA = 4,
-};
-
-#if IS_ENABLED(CONFIG_DRM_RCAR_LVDS)
-int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu);
-void rcar_du_lvdsenc_set_mode(struct rcar_du_lvdsenc *lvds,
-			      enum rcar_lvds_mode mode);
-int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds,
-			   struct drm_crtc *crtc, bool enable);
-void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
-				  struct drm_display_mode *mode);
-#else
-static inline int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu)
-{
-	return 0;
-}
-static inline void rcar_du_lvdsenc_set_mode(struct rcar_du_lvdsenc *lvds,
-					    enum rcar_lvds_mode mode)
-{
-}
-static inline int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds,
-					 struct drm_crtc *crtc, bool enable)
-{
-	return 0;
-}
-static inline void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
-						struct drm_display_mode *mode)
-{
-}
-#endif
-
-#endif /* __RCAR_DU_LVDSENC_H__ */
diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c
new file mode 100644
index 000000000000..0a5aa39b1967
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
@@ -0,0 +1,524 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_lvds.c  --  R-Car LVDS Encoder
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_panel.h>
+
+#include "rcar_lvds_regs.h"
+
+/* Keep in sync with the LVDCR0.LVMD hardware register values. */
+enum rcar_lvds_mode {
+	RCAR_LVDS_MODE_JEIDA = 0,
+	RCAR_LVDS_MODE_MIRROR = 1,
+	RCAR_LVDS_MODE_VESA = 4,
+};
+
+#define RCAR_LVDS_QUIRK_LANES	(1 << 0)	/* LVDS lanes 1 and 3 inverted */
+
+struct rcar_lvds_device_info {
+	unsigned int gen;
+	unsigned int quirks;
+};
+
+struct rcar_lvds {
+	struct device *dev;
+	const struct rcar_lvds_device_info *info;
+
+	struct drm_bridge bridge;
+
+	struct drm_bridge *next_bridge;
+	struct drm_connector connector;
+	struct drm_panel *panel;
+
+	void __iomem *mmio;
+	struct clk *clock;
+	bool enabled;
+
+	struct drm_display_mode display_mode;
+	enum rcar_lvds_mode mode;
+};
+
+#define bridge_to_rcar_lvds(bridge) \
+	container_of(bridge, struct rcar_lvds, bridge)
+
+#define connector_to_rcar_lvds(connector) \
+	container_of(connector, struct rcar_lvds, connector)
+
+static void rcar_lvds_write(struct rcar_lvds *lvds, u32 reg, u32 data)
+{
+	iowrite32(data, lvds->mmio + reg);
+}
+
+/* -----------------------------------------------------------------------------
+ * Connector & Panel
+ */
+
+static int rcar_lvds_connector_get_modes(struct drm_connector *connector)
+{
+	struct rcar_lvds *lvds = connector_to_rcar_lvds(connector);
+
+	return drm_panel_get_modes(lvds->panel);
+}
+
+static int rcar_lvds_connector_atomic_check(struct drm_connector *connector,
+					    struct drm_connector_state *state)
+{
+	struct rcar_lvds *lvds = connector_to_rcar_lvds(connector);
+	const struct drm_display_mode *panel_mode;
+	struct drm_crtc_state *crtc_state;
+
+	if (list_empty(&connector->modes)) {
+		dev_dbg(lvds->dev, "connector: empty modes list\n");
+		return -EINVAL;
+	}
+
+	panel_mode = list_first_entry(&connector->modes,
+				      struct drm_display_mode, head);
+
+	/* We're not allowed to modify the resolution. */
+	crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
+	if (IS_ERR(crtc_state))
+		return PTR_ERR(crtc_state);
+
+	if (crtc_state->mode.hdisplay != panel_mode->hdisplay ||
+	    crtc_state->mode.vdisplay != panel_mode->vdisplay)
+		return -EINVAL;
+
+	/* The flat panel mode is fixed, just copy it to the adjusted mode. */
+	drm_mode_copy(&crtc_state->adjusted_mode, panel_mode);
+
+	return 0;
+}
+
+static const struct drm_connector_helper_funcs rcar_lvds_conn_helper_funcs = {
+	.get_modes = rcar_lvds_connector_get_modes,
+	.atomic_check = rcar_lvds_connector_atomic_check,
+};
+
+static const struct drm_connector_funcs rcar_lvds_conn_funcs = {
+	.reset = drm_atomic_helper_connector_reset,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+/* -----------------------------------------------------------------------------
+ * Bridge
+ */
+
+static u32 rcar_lvds_lvdpllcr_gen2(unsigned int freq)
+{
+	if (freq < 39000)
+		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
+	else if (freq < 61000)
+		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
+	else if (freq < 121000)
+		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
+	else
+		return LVDPLLCR_PLLDLYCNT_150M;
+}
+
+static u32 rcar_lvds_lvdpllcr_gen3(unsigned int freq)
+{
+	if (freq < 42000)
+		return LVDPLLCR_PLLDIVCNT_42M;
+	else if (freq < 85000)
+		return LVDPLLCR_PLLDIVCNT_85M;
+	else if (freq < 128000)
+		return LVDPLLCR_PLLDIVCNT_128M;
+	else
+		return LVDPLLCR_PLLDIVCNT_148M;
+}
+
+static void rcar_lvds_enable(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+	const struct drm_display_mode *mode = &lvds->display_mode;
+	/*
+	 * FIXME: We should really retrieve the CRTC through the state, but how
+	 * do we get a state pointer?
+	 */
+	struct drm_crtc *crtc = lvds->bridge.encoder->crtc;
+	u32 lvdpllcr;
+	u32 lvdhcr;
+	u32 lvdcr0;
+	int ret;
+
+	WARN_ON(lvds->enabled);
+
+	ret = clk_prepare_enable(lvds->clock);
+	if (ret < 0)
+		return;
+
+	/*
+	 * Hardcode the channels and control signals routing for now.
+	 *
+	 * HSYNC -> CTRL0
+	 * VSYNC -> CTRL1
+	 * DISP  -> CTRL2
+	 * 0     -> CTRL3
+	 */
+	rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO |
+			LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC |
+			LVDCTRCR_CTR0SEL_HSYNC);
+
+	if (lvds->info->quirks & RCAR_LVDS_QUIRK_LANES)
+		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3)
+		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1);
+	else
+		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1)
+		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3);
+
+	rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
+
+	/* PLL clock configuration. */
+	if (lvds->info->gen < 3)
+		lvdpllcr = rcar_lvds_lvdpllcr_gen2(mode->clock);
+	else
+		lvdpllcr = rcar_lvds_lvdpllcr_gen3(mode->clock);
+	rcar_lvds_write(lvds, LVDPLLCR, lvdpllcr);
+
+	/* Set the LVDS mode and select the input. */
+	lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT;
+	if (drm_crtc_index(crtc) == 2)
+		lvdcr0 |= LVDCR0_DUSEL;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
+	/* Turn all the channels on. */
+	rcar_lvds_write(lvds, LVDCR1,
+			LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
+			LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
+
+	if (lvds->info->gen < 3) {
+		/* Enable LVDS operation and turn the bias circuitry on. */
+		lvdcr0 |= LVDCR0_BEN | LVDCR0_LVEN;
+		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+	}
+
+	/* Turn the PLL on. */
+	lvdcr0 |= LVDCR0_PLLON;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
+	if (lvds->info->gen > 2) {
+		/* Set LVDS normal mode. */
+		lvdcr0 |= LVDCR0_PWD;
+		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+	}
+
+	/* Wait for the startup delay. */
+	usleep_range(100, 150);
+
+	/* Turn the output on. */
+	lvdcr0 |= LVDCR0_LVRES;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
+	if (lvds->panel) {
+		drm_panel_prepare(lvds->panel);
+		drm_panel_enable(lvds->panel);
+	}
+
+	lvds->enabled = true;
+}
+
+static void rcar_lvds_disable(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+
+	WARN_ON(!lvds->enabled);
+
+	if (lvds->panel) {
+		drm_panel_disable(lvds->panel);
+		drm_panel_unprepare(lvds->panel);
+	}
+
+	rcar_lvds_write(lvds, LVDCR0, 0);
+	rcar_lvds_write(lvds, LVDCR1, 0);
+
+	clk_disable_unprepare(lvds->clock);
+
+	lvds->enabled = false;
+}
+
+static bool rcar_lvds_mode_fixup(struct drm_bridge *bridge,
+				 const struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	/*
+	 * The internal LVDS encoder has a restricted clock frequency operating
+	 * range (31MHz to 148.5MHz). Clamp the clock accordingly.
+	 */
+	adjusted_mode->clock = clamp(adjusted_mode->clock, 31000, 148500);
+
+	return true;
+}
+
+static void rcar_lvds_get_lvds_mode(struct rcar_lvds *lvds)
+{
+	struct drm_display_info *info = &lvds->connector.display_info;
+	enum rcar_lvds_mode mode;
+
+	/*
+	 * There is no API yet to retrieve LVDS mode from a bridge, only panels
+	 * are supported.
+	 */
+	if (!lvds->panel)
+		return;
+
+	if (!info->num_bus_formats || !info->bus_formats) {
+		dev_err(lvds->dev, "no LVDS bus format reported\n");
+		return;
+	}
+
+	switch (info->bus_formats[0]) {
+	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+	case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
+		mode = RCAR_LVDS_MODE_JEIDA;
+		break;
+	case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
+		mode = RCAR_LVDS_MODE_VESA;
+		break;
+	default:
+		dev_err(lvds->dev, "unsupported LVDS bus format 0x%04x\n",
+			info->bus_formats[0]);
+		return;
+	}
+
+	if (info->bus_flags & DRM_BUS_FLAG_DATA_LSB_TO_MSB)
+		mode |= RCAR_LVDS_MODE_MIRROR;
+
+	lvds->mode = mode;
+}
+
+static void rcar_lvds_mode_set(struct drm_bridge *bridge,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+
+	WARN_ON(lvds->enabled);
+
+	lvds->display_mode = *adjusted_mode;
+
+	rcar_lvds_get_lvds_mode(lvds);
+}
+
+static int rcar_lvds_attach(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+	struct drm_connector *connector = &lvds->connector;
+	struct drm_encoder *encoder = bridge->encoder;
+	int ret;
+
+	/* If we have a next bridge just attach it. */
+	if (lvds->next_bridge)
+		return drm_bridge_attach(bridge->encoder, lvds->next_bridge,
+					 bridge);
+
+	/* Otherwise we have a panel, create a connector. */
+	ret = drm_connector_init(bridge->dev, connector, &rcar_lvds_conn_funcs,
+				 DRM_MODE_CONNECTOR_LVDS);
+	if (ret < 0)
+		return ret;
+
+	drm_connector_helper_add(connector, &rcar_lvds_conn_helper_funcs);
+
+	ret = drm_mode_connector_attach_encoder(connector, encoder);
+	if (ret < 0)
+		return ret;
+
+	return drm_panel_attach(lvds->panel, connector);
+}
+
+static void rcar_lvds_detach(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+
+	if (lvds->panel)
+		drm_panel_detach(lvds->panel);
+}
+
+static const struct drm_bridge_funcs rcar_lvds_bridge_ops = {
+	.attach = rcar_lvds_attach,
+	.detach = rcar_lvds_detach,
+	.enable = rcar_lvds_enable,
+	.disable = rcar_lvds_disable,
+	.mode_fixup = rcar_lvds_mode_fixup,
+	.mode_set = rcar_lvds_mode_set,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe & Remove
+ */
+
+static int rcar_lvds_parse_dt(struct rcar_lvds *lvds)
+{
+	struct device_node *local_output = NULL;
+	struct device_node *remote_input = NULL;
+	struct device_node *remote = NULL;
+	struct device_node *node;
+	bool is_bridge = false;
+	int ret = 0;
+
+	local_output = of_graph_get_endpoint_by_regs(lvds->dev->of_node, 1, 0);
+	if (!local_output) {
+		dev_dbg(lvds->dev, "unconnected port@1\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Locate the connected entity and infer its type from the number of
+	 * endpoints.
+	 */
+	remote = of_graph_get_remote_port_parent(local_output);
+	if (!remote) {
+		dev_dbg(lvds->dev, "unconnected endpoint %pOF\n", local_output);
+		ret = -ENODEV;
+		goto done;
+	}
+
+	if (!of_device_is_available(remote)) {
+		dev_dbg(lvds->dev, "connected entity %pOF is disabled\n",
+			remote);
+		ret = -ENODEV;
+		goto done;
+	}
+
+	remote_input = of_graph_get_remote_endpoint(local_output);
+
+	for_each_endpoint_of_node(remote, node) {
+		if (node != remote_input) {
+			/*
+			 * We've found one endpoint other than the input, this
+			 * must be a bridge.
+			 */
+			is_bridge = true;
+			of_node_put(node);
+			break;
+		}
+	}
+
+	if (is_bridge) {
+		lvds->next_bridge = of_drm_find_bridge(remote);
+		if (!lvds->next_bridge)
+			ret = -EPROBE_DEFER;
+	} else {
+		lvds->panel = of_drm_find_panel(remote);
+		if (!lvds->panel)
+			ret = -EPROBE_DEFER;
+	}
+
+done:
+	of_node_put(local_output);
+	of_node_put(remote_input);
+	of_node_put(remote);
+
+	return ret;
+}
+
+static int rcar_lvds_probe(struct platform_device *pdev)
+{
+	struct rcar_lvds *lvds;
+	struct resource *mem;
+	int ret;
+
+	lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
+	if (lvds == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, lvds);
+
+	lvds->dev = &pdev->dev;
+	lvds->info = of_device_get_match_data(&pdev->dev);
+	lvds->enabled = false;
+
+	ret = rcar_lvds_parse_dt(lvds);
+	if (ret < 0)
+		return ret;
+
+	lvds->bridge.driver_private = lvds;
+	lvds->bridge.funcs = &rcar_lvds_bridge_ops;
+	lvds->bridge.of_node = pdev->dev.of_node;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lvds->mmio = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(lvds->mmio))
+		return PTR_ERR(lvds->mmio);
+
+	lvds->clock = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(lvds->clock)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return PTR_ERR(lvds->clock);
+	}
+
+	drm_bridge_add(&lvds->bridge);
+
+	return 0;
+}
+
+static int rcar_lvds_remove(struct platform_device *pdev)
+{
+	struct rcar_lvds *lvds = platform_get_drvdata(pdev);
+
+	drm_bridge_remove(&lvds->bridge);
+
+	return 0;
+}
+
+static const struct rcar_lvds_device_info rcar_lvds_gen2_info = {
+	.gen = 2,
+};
+
+static const struct rcar_lvds_device_info rcar_lvds_r8a7790_info = {
+	.gen = 2,
+	.quirks = RCAR_LVDS_QUIRK_LANES,
+};
+
+static const struct rcar_lvds_device_info rcar_lvds_gen3_info = {
+	.gen = 3,
+};
+
+static const struct of_device_id rcar_lvds_of_table[] = {
+	{ .compatible = "renesas,r8a7743-lvds", .data = &rcar_lvds_gen2_info },
+	{ .compatible = "renesas,r8a7790-lvds", .data = &rcar_lvds_r8a7790_info },
+	{ .compatible = "renesas,r8a7791-lvds", .data = &rcar_lvds_gen2_info },
+	{ .compatible = "renesas,r8a7793-lvds", .data = &rcar_lvds_gen2_info },
+	{ .compatible = "renesas,r8a7795-lvds", .data = &rcar_lvds_gen3_info },
+	{ .compatible = "renesas,r8a7796-lvds", .data = &rcar_lvds_gen3_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, rcar_lvds_of_table);
+
+static struct platform_driver rcar_lvds_platform_driver = {
+	.probe		= rcar_lvds_probe,
+	.remove		= rcar_lvds_remove,
+	.driver		= {
+		.name	= "rcar-lvds",
+		.of_match_table = rcar_lvds_of_table,
+	},
+};
+
+module_platform_driver(rcar_lvds_platform_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_DESCRIPTION("Renesas R-Car LVDS Encoder Driver");
+MODULE_LICENSE("GPL");
-- 
Regards,

Laurent Pinchart

[PATCH v5 8/8] drm: rcar-du: Convert LVDS encoder code to bridge driver

[Laurent Pinchart]

The LVDS encoders used to be described in DT as part of the DU. They now
have their own DT node, linked to the DU using the OF graph bindings.
This allows moving internal LVDS encoder support to a separate driver
modelled as a DRM bridge. Backward compatibility is retained as legacy
DT is patched live to move to the new bindings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
Changes since v1:

- Update the SPDX headers to use GPL-2.0 instead of GPL-2.0-only
- Update to the <soc>-lvds compatible string format
---
 drivers/gpu/drm/rcar-du/Kconfig           |   4 +-
 drivers/gpu/drm/rcar-du/Makefile          |   3 +-
 drivers/gpu/drm/rcar-du/rcar_du_drv.c     |  21 +-
 drivers/gpu/drm/rcar-du/rcar_du_drv.h     |   5 -
 drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 175 +---------
 drivers/gpu/drm/rcar-du/rcar_du_encoder.h |  12 -
 drivers/gpu/drm/rcar-du/rcar_du_kms.c     |  14 +-
 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c |  93 ------
 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h |  24 --
 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 238 --------------
 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h |  64 ----
 drivers/gpu/drm/rcar-du/rcar_lvds.c       | 524 ++++++++++++++++++++++++++++++
 12 files changed, 561 insertions(+), 616 deletions(-)
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
 delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h
 create mode 100644 drivers/gpu/drm/rcar-du/rcar_lvds.c

diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
index 3f83352a7313..edde8d4b87a3 100644
--- a/drivers/gpu/drm/rcar-du/Kconfig
+++ b/drivers/gpu/drm/rcar-du/Kconfig
@@ -19,8 +19,8 @@ config DRM_RCAR_DW_HDMI
 	  Enable support for R-Car Gen3 internal HDMI encoder.
 
 config DRM_RCAR_LVDS
-	bool "R-Car DU LVDS Encoder Support"
-	depends on DRM_RCAR_DU
+	tristate "R-Car DU LVDS Encoder Support"
+	depends on DRM && DRM_BRIDGE && OF
 	select DRM_PANEL
 	select OF_FLATTREE
 	select OF_OVERLAY
diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile
index 86b337b4be5d..3e58ed93d5b1 100644
--- a/drivers/gpu/drm/rcar-du/Makefile
+++ b/drivers/gpu/drm/rcar-du/Makefile
@@ -4,10 +4,8 @@ rcar-du-drm-y := rcar_du_crtc.o \
 		 rcar_du_encoder.o \
 		 rcar_du_group.o \
 		 rcar_du_kms.o \
-		 rcar_du_lvdscon.o \
 		 rcar_du_plane.o
 
-rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_lvdsenc.o
 rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_of.o \
 					   rcar_du_of_lvds_r8a7790.dtb.o \
 					   rcar_du_of_lvds_r8a7791.dtb.o \
@@ -18,3 +16,4 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o
 
 obj-$(CONFIG_DRM_RCAR_DU)		+= rcar-du-drm.o
 obj-$(CONFIG_DRM_RCAR_DW_HDMI)		+= rcar_dw_hdmi.o
+obj-$(CONFIG_DRM_RCAR_LVDS)		+= rcar_lvds.o
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 6e02c762a557..06a3fbdd728a 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -29,6 +29,7 @@
 
 #include "rcar_du_drv.h"
 #include "rcar_du_kms.h"
+#include "rcar_du_of.h"
 #include "rcar_du_regs.h"
 
 /* -----------------------------------------------------------------------------
@@ -74,7 +75,6 @@ static const struct rcar_du_device_info rzg1_du_r8a7745_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7779_info = {
@@ -95,14 +95,13 @@ static const struct rcar_du_device_info rcar_du_r8a7779_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7790_info = {
 	.gen = 2,
 	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
 		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
-	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
+	.quirks = RCAR_DU_QUIRK_ALIGN_128B,
 	.num_crtcs = 3,
 	.routes = {
 		/*
@@ -164,7 +163,6 @@ static const struct rcar_du_device_info rcar_du_r8a7792_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7794_info = {
@@ -186,7 +184,6 @@ static const struct rcar_du_device_info rcar_du_r8a7794_info = {
 			.port = 1,
 		},
 	},
-	.num_lvds = 0,
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7795_info = {
@@ -434,7 +431,19 @@ static struct platform_driver rcar_du_platform_driver = {
 	},
 };
 
-module_platform_driver(rcar_du_platform_driver);
+static int __init rcar_du_init(void)
+{
+	rcar_du_of_init(rcar_du_of_table);
+
+	return platform_driver_register(&rcar_du_platform_driver);
+}
+module_init(rcar_du_init);
+
+static void __exit rcar_du_exit(void)
+{
+	platform_driver_unregister(&rcar_du_platform_driver);
+}
+module_exit(rcar_du_exit);
 
 MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
 MODULE_DESCRIPTION("Renesas R-Car Display Unit DRM Driver");
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
index f400fde65a0c..5c7ec15818c7 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -26,14 +26,12 @@ struct device;
 struct drm_device;
 struct drm_fbdev_cma;
 struct rcar_du_device;
-struct rcar_du_lvdsenc;
 
 #define RCAR_DU_FEATURE_CRTC_IRQ_CLOCK	(1 << 0)	/* Per-CRTC IRQ and clock */
 #define RCAR_DU_FEATURE_EXT_CTRL_REGS	(1 << 1)	/* Has extended control registers */
 #define RCAR_DU_FEATURE_VSP1_SOURCE	(1 << 2)	/* Has inputs from VSP1 */
 
 #define RCAR_DU_QUIRK_ALIGN_128B	(1 << 0)	/* Align pitches to 128 bytes */
-#define RCAR_DU_QUIRK_LVDS_LANES	(1 << 1)	/* LVDS lanes 1 and 3 inverted */
 
 /*
  * struct rcar_du_output_routing - Output routing specification
@@ -70,7 +68,6 @@ struct rcar_du_device_info {
 
 #define RCAR_DU_MAX_CRTCS		4
 #define RCAR_DU_MAX_GROUPS		DIV_ROUND_UP(RCAR_DU_MAX_CRTCS, 2)
-#define RCAR_DU_MAX_LVDS		2
 #define RCAR_DU_MAX_VSPS		4
 
 struct rcar_du_device {
@@ -96,8 +93,6 @@ struct rcar_du_device {
 
 	unsigned int dpad0_source;
 	unsigned int vspd1_sink;
-
-	struct rcar_du_lvdsenc *lvds[RCAR_DU_MAX_LVDS];
 };
 
 static inline bool rcar_du_has(struct rcar_du_device *rcdu,
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
index ba8d2804c1d1..f9c933d3bae6 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -21,134 +21,22 @@
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
 #include "rcar_du_kms.h"
-#include "rcar_du_lvdscon.h"
-#include "rcar_du_lvdsenc.h"
 
 /* -----------------------------------------------------------------------------
  * Encoder
  */
 
-static void rcar_du_encoder_disable(struct drm_encoder *encoder)
-{
-	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-
-	if (renc->connector && renc->connector->panel) {
-		drm_panel_disable(renc->connector->panel);
-		drm_panel_unprepare(renc->connector->panel);
-	}
-
-	if (renc->lvds)
-		rcar_du_lvdsenc_enable(renc->lvds, encoder->crtc, false);
-}
-
-static void rcar_du_encoder_enable(struct drm_encoder *encoder)
-{
-	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-
-	if (renc->lvds)
-		rcar_du_lvdsenc_enable(renc->lvds, encoder->crtc, true);
-
-	if (renc->connector && renc->connector->panel) {
-		drm_panel_prepare(renc->connector->panel);
-		drm_panel_enable(renc->connector->panel);
-	}
-}
-
-static int rcar_du_encoder_atomic_check(struct drm_encoder *encoder,
-					struct drm_crtc_state *crtc_state,
-					struct drm_connector_state *conn_state)
-{
-	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
-	const struct drm_display_mode *mode = &crtc_state->mode;
-	struct drm_connector *connector = conn_state->connector;
-	struct drm_device *dev = encoder->dev;
-
-	/*
-	 * Only panel-related encoder types require validation here, everything
-	 * else is handled by the bridge drivers.
-	 */
-	if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS) {
-		const struct drm_display_mode *panel_mode;
-
-		if (list_empty(&connector->modes)) {
-			dev_dbg(dev->dev, "encoder: empty modes list\n");
-			return -EINVAL;
-		}
-
-		panel_mode = list_first_entry(&connector->modes,
-					      struct drm_display_mode, head);
-
-		/* We're not allowed to modify the resolution. */
-		if (mode->hdisplay != panel_mode->hdisplay ||
-		    mode->vdisplay != panel_mode->vdisplay)
-			return -EINVAL;
-
-		/*
-		 * The flat panel mode is fixed, just copy it to the adjusted
-		 * mode.
-		 */
-		drm_mode_copy(adjusted_mode, panel_mode);
-	}
-
-	if (renc->lvds)
-		rcar_du_lvdsenc_atomic_check(renc->lvds, adjusted_mode);
-
-	return 0;
-}
-
 static void rcar_du_encoder_mode_set(struct drm_encoder *encoder,
 				     struct drm_crtc_state *crtc_state,
 				     struct drm_connector_state *conn_state)
 {
 	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
-	struct drm_display_info *info = &conn_state->connector->display_info;
-	enum rcar_lvds_mode mode;
 
 	rcar_du_crtc_route_output(crtc_state->crtc, renc->output);
-
-	if (!renc->lvds) {
-		/*
-		 * The DU driver creates connectors only for the outputs of the
-		 * internal LVDS encoders.
-		 */
-		renc->connector = NULL;
-		return;
-	}
-
-	renc->connector = to_rcar_connector(conn_state->connector);
-
-	if (!info->num_bus_formats || !info->bus_formats) {
-		dev_err(encoder->dev->dev, "no LVDS bus format reported\n");
-		return;
-	}
-
-	switch (info->bus_formats[0]) {
-	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
-	case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
-		mode = RCAR_LVDS_MODE_JEIDA;
-		break;
-	case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
-		mode = RCAR_LVDS_MODE_VESA;
-		break;
-	default:
-		dev_err(encoder->dev->dev,
-			"unsupported LVDS bus format 0x%04x\n",
-			info->bus_formats[0]);
-		return;
-	}
-
-	if (info->bus_flags & DRM_BUS_FLAG_DATA_LSB_TO_MSB)
-		mode |= RCAR_LVDS_MODE_MIRROR;
-
-	rcar_du_lvdsenc_set_mode(renc->lvds, mode);
 }
 
 static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
 	.atomic_mode_set = rcar_du_encoder_mode_set,
-	.disable = rcar_du_encoder_disable,
-	.enable = rcar_du_encoder_enable,
-	.atomic_check = rcar_du_encoder_atomic_check,
 };
 
 static const struct drm_encoder_funcs encoder_funcs = {
@@ -172,33 +60,14 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 	renc->output = output;
 	encoder = rcar_encoder_to_drm_encoder(renc);
 
-	switch (output) {
-	case RCAR_DU_OUTPUT_LVDS0:
-		renc->lvds = rcdu->lvds[0];
-		break;
+	dev_dbg(rcdu->dev, "initializing encoder %pOF for output %u\n",
+		enc_node, output);
 
-	case RCAR_DU_OUTPUT_LVDS1:
-		renc->lvds = rcdu->lvds[1];
-		break;
-
-	default:
-		break;
-	}
-
-	if (enc_node) {
-		dev_dbg(rcdu->dev, "initializing encoder %pOF for output %u\n",
-			enc_node, output);
-
-		/* Locate the DRM bridge from the encoder DT node. */
-		bridge = of_drm_find_bridge(enc_node);
-		if (!bridge) {
-			ret = -EPROBE_DEFER;
-			goto done;
-		}
-	} else {
-		dev_dbg(rcdu->dev,
-			"initializing internal encoder for output %u\n",
-			output);
+	/* Locate the DRM bridge from the encoder DT node. */
+	bridge = of_drm_find_bridge(enc_node);
+	if (!bridge) {
+		ret = -EPROBE_DEFER;
+		goto done;
 	}
 
 	ret = drm_encoder_init(rcdu->ddev, encoder, &encoder_funcs,
@@ -208,28 +77,14 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 
 	drm_encoder_helper_add(encoder, &encoder_helper_funcs);
 
-	if (bridge) {
-		/*
-		 * Attach the bridge to the encoder. The bridge will create the
-		 * connector.
-		 */
-		ret = drm_bridge_attach(encoder, bridge, NULL);
-		if (ret) {
-			drm_encoder_cleanup(encoder);
-			return ret;
-		}
-	} else {
-		/* There's no bridge, create the connector manually. */
-		switch (output) {
-		case RCAR_DU_OUTPUT_LVDS0:
-		case RCAR_DU_OUTPUT_LVDS1:
-			ret = rcar_du_lvds_connector_init(rcdu, renc, con_node);
-			break;
-
-		default:
-			ret = -EINVAL;
-			break;
-		}
+	/*
+	 * Attach the bridge to the encoder. The bridge will create the
+	 * connector.
+	 */
+	ret = drm_bridge_attach(encoder, bridge, NULL);
+	if (ret) {
+		drm_encoder_cleanup(encoder);
+		return ret;
 	}
 
 done:
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.h b/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
index 5422fa4df272..2d2abcacd169 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
@@ -19,13 +19,10 @@
 
 struct drm_panel;
 struct rcar_du_device;
-struct rcar_du_lvdsenc;
 
 struct rcar_du_encoder {
 	struct drm_encoder base;
 	enum rcar_du_output output;
-	struct rcar_du_connector *connector;
-	struct rcar_du_lvdsenc *lvds;
 };
 
 #define to_rcar_encoder(e) \
@@ -33,15 +30,6 @@ struct rcar_du_encoder {
 
 #define rcar_encoder_to_drm_encoder(e)	(&(e)->base)
 
-struct rcar_du_connector {
-	struct drm_connector connector;
-	struct rcar_du_encoder *encoder;
-	struct drm_panel *panel;
-};
-
-#define to_rcar_connector(c) \
-	container_of(c, struct rcar_du_connector, connector)
-
 int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 			 enum rcar_du_output output,
 			 struct device_node *enc_node,
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index 566d1a948c8f..0329b354bfa0 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -27,7 +27,6 @@
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
 #include "rcar_du_kms.h"
-#include "rcar_du_lvdsenc.h"
 #include "rcar_du_regs.h"
 #include "rcar_du_vsp.h"
 
@@ -341,11 +340,10 @@ static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu,
 	of_node_put(entity_ep_node);
 
 	if (!encoder) {
-		/*
-		 * If no encoder has been found the entity must be the
-		 * connector.
-		 */
-		connector = entity;
+		dev_warn(rcdu->dev,
+			 "no encoder found for endpoint %pOF, skipping\n",
+			 ep->local_node);
+		return -ENODEV;
 	}
 
 	ret = rcar_du_encoder_init(rcdu, output, encoder, connector);
@@ -595,10 +593,6 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
 	}
 
 	/* Initialize the encoders. */
-	ret = rcar_du_lvdsenc_init(rcdu);
-	if (ret < 0)
-		return ret;
-
 	ret = rcar_du_encoders_init(rcdu);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c
deleted file mode 100644
index e96f2df0c305..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * rcar_du_lvdscon.c  --  R-Car Display Unit LVDS Connector
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <drm/drmP.h>
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_panel.h>
-
-#include <video/display_timing.h>
-#include <video/of_display_timing.h>
-#include <video/videomode.h>
-
-#include "rcar_du_drv.h"
-#include "rcar_du_encoder.h"
-#include "rcar_du_kms.h"
-#include "rcar_du_lvdscon.h"
-
-static int rcar_du_lvds_connector_get_modes(struct drm_connector *connector)
-{
-	struct rcar_du_connector *rcon = to_rcar_connector(connector);
-
-	return drm_panel_get_modes(rcon->panel);
-}
-
-static const struct drm_connector_helper_funcs connector_helper_funcs = {
-	.get_modes = rcar_du_lvds_connector_get_modes,
-};
-
-static void rcar_du_lvds_connector_destroy(struct drm_connector *connector)
-{
-	struct rcar_du_connector *rcon = to_rcar_connector(connector);
-
-	drm_panel_detach(rcon->panel);
-	drm_connector_cleanup(connector);
-}
-
-static const struct drm_connector_funcs connector_funcs = {
-	.reset = drm_atomic_helper_connector_reset,
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.destroy = rcar_du_lvds_connector_destroy,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-int rcar_du_lvds_connector_init(struct rcar_du_device *rcdu,
-				struct rcar_du_encoder *renc,
-				const struct device_node *np)
-{
-	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(renc);
-	struct rcar_du_connector *rcon;
-	struct drm_connector *connector;
-	int ret;
-
-	rcon = devm_kzalloc(rcdu->dev, sizeof(*rcon), GFP_KERNEL);
-	if (rcon == NULL)
-		return -ENOMEM;
-
-	connector = &rcon->connector;
-
-	rcon->panel = of_drm_find_panel(np);
-	if (!rcon->panel)
-		return -EPROBE_DEFER;
-
-	ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs,
-				 DRM_MODE_CONNECTOR_LVDS);
-	if (ret < 0)
-		return ret;
-
-	drm_connector_helper_add(connector, &connector_helper_funcs);
-
-	ret = drm_mode_connector_attach_encoder(connector, encoder);
-	if (ret < 0)
-		return ret;
-
-	ret = drm_panel_attach(rcon->panel, connector);
-	if (ret < 0)
-		return ret;
-
-	rcon->encoder = renc;
-
-	return 0;
-}
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h b/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h
deleted file mode 100644
index 639071dd235c..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * rcar_du_lvdscon.h  --  R-Car Display Unit LVDS Connector
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __RCAR_DU_LVDSCON_H__
-#define __RCAR_DU_LVDSCON_H__
-
-struct rcar_du_device;
-struct rcar_du_encoder;
-
-int rcar_du_lvds_connector_init(struct rcar_du_device *rcdu,
-				struct rcar_du_encoder *renc,
-				const struct device_node *np);
-
-#endif /* __RCAR_DU_LVDSCON_H__ */
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
deleted file mode 100644
index 4defa8123eb2..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * rcar_du_lvdsenc.c  --  R-Car Display Unit LVDS Encoder
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include "rcar_du_drv.h"
-#include "rcar_du_encoder.h"
-#include "rcar_du_lvdsenc.h"
-#include "rcar_lvds_regs.h"
-
-struct rcar_du_lvdsenc {
-	struct rcar_du_device *dev;
-
-	unsigned int index;
-	void __iomem *mmio;
-	struct clk *clock;
-	bool enabled;
-
-	enum rcar_lvds_input input;
-	enum rcar_lvds_mode mode;
-};
-
-static void rcar_lvds_write(struct rcar_du_lvdsenc *lvds, u32 reg, u32 data)
-{
-	iowrite32(data, lvds->mmio + reg);
-}
-
-static u32 rcar_lvds_lvdpllcr_gen2(unsigned int freq)
-{
-	if (freq < 39000)
-		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
-	else if (freq < 61000)
-		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
-	else if (freq < 121000)
-		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
-	else
-		return LVDPLLCR_PLLDLYCNT_150M;
-}
-
-static u32 rcar_lvds_lvdpllcr_gen3(unsigned int freq)
-{
-	if (freq < 42000)
-		return LVDPLLCR_PLLDIVCNT_42M;
-	else if (freq < 85000)
-		return LVDPLLCR_PLLDIVCNT_85M;
-	else if (freq < 128000)
-		return LVDPLLCR_PLLDIVCNT_128M;
-	else
-		return LVDPLLCR_PLLDIVCNT_148M;
-}
-
-static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds,
-				 struct rcar_du_crtc *rcrtc)
-{
-	const struct drm_display_mode *mode = &rcrtc->crtc.mode;
-	u32 lvdpllcr;
-	u32 lvdhcr;
-	u32 lvdcr0;
-	int ret;
-
-	if (lvds->enabled)
-		return 0;
-
-	ret = clk_prepare_enable(lvds->clock);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Hardcode the channels and control signals routing for now.
-	 *
-	 * HSYNC -> CTRL0
-	 * VSYNC -> CTRL1
-	 * DISP  -> CTRL2
-	 * 0     -> CTRL3
-	 */
-	rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO |
-			LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC |
-			LVDCTRCR_CTR0SEL_HSYNC);
-
-	if (rcar_du_needs(lvds->dev, RCAR_DU_QUIRK_LVDS_LANES))
-		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3)
-		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1);
-	else
-		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1)
-		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3);
-
-	rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
-
-	/* PLL clock configuration. */
-	if (lvds->dev->info->gen < 3)
-		lvdpllcr = rcar_lvds_lvdpllcr_gen2(mode->clock);
-	else
-		lvdpllcr = rcar_lvds_lvdpllcr_gen3(mode->clock);
-	rcar_lvds_write(lvds, LVDPLLCR, lvdpllcr);
-
-	/* Set the LVDS mode and select the input. */
-	lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT;
-	if (rcrtc->index == 2)
-		lvdcr0 |= LVDCR0_DUSEL;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-
-	/* Turn all the channels on. */
-	rcar_lvds_write(lvds, LVDCR1,
-			LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
-			LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
-
-	if (lvds->dev->info->gen < 3) {
-		/* Enable LVDS operation and turn the bias circuitry on. */
-		lvdcr0 |= LVDCR0_BEN | LVDCR0_LVEN;
-		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-	}
-
-	/* Turn the PLL on. */
-	lvdcr0 |= LVDCR0_PLLON;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-
-	if (lvds->dev->info->gen > 2) {
-		/* Set LVDS normal mode. */
-		lvdcr0 |= LVDCR0_PWD;
-		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-	}
-
-	/* Wait for the startup delay. */
-	usleep_range(100, 150);
-
-	/* Turn the output on. */
-	lvdcr0 |= LVDCR0_LVRES;
-	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
-
-	lvds->enabled = true;
-
-	return 0;
-}
-
-static void rcar_du_lvdsenc_stop(struct rcar_du_lvdsenc *lvds)
-{
-	if (!lvds->enabled)
-		return;
-
-	rcar_lvds_write(lvds, LVDCR0, 0);
-	rcar_lvds_write(lvds, LVDCR1, 0);
-
-	clk_disable_unprepare(lvds->clock);
-
-	lvds->enabled = false;
-}
-
-int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds, struct drm_crtc *crtc,
-			   bool enable)
-{
-	if (!enable) {
-		rcar_du_lvdsenc_stop(lvds);
-		return 0;
-	} else if (crtc) {
-		struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
-		return rcar_du_lvdsenc_start(lvds, rcrtc);
-	} else
-		return -EINVAL;
-}
-
-void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
-				  struct drm_display_mode *mode)
-{
-	/*
-	 * The internal LVDS encoder has a restricted clock frequency operating
-	 * range (31MHz to 148.5MHz). Clamp the clock accordingly.
-	 */
-	mode->clock = clamp(mode->clock, 31000, 148500);
-}
-
-void rcar_du_lvdsenc_set_mode(struct rcar_du_lvdsenc *lvds,
-			      enum rcar_lvds_mode mode)
-{
-	lvds->mode = mode;
-}
-
-static int rcar_du_lvdsenc_get_resources(struct rcar_du_lvdsenc *lvds,
-					 struct platform_device *pdev)
-{
-	struct resource *mem;
-	char name[7];
-
-	sprintf(name, "lvds.%u", lvds->index);
-
-	mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
-	lvds->mmio = devm_ioremap_resource(&pdev->dev, mem);
-	if (IS_ERR(lvds->mmio))
-		return PTR_ERR(lvds->mmio);
-
-	lvds->clock = devm_clk_get(&pdev->dev, name);
-	if (IS_ERR(lvds->clock)) {
-		dev_err(&pdev->dev, "failed to get clock for %s\n", name);
-		return PTR_ERR(lvds->clock);
-	}
-
-	return 0;
-}
-
-int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu)
-{
-	struct platform_device *pdev = to_platform_device(rcdu->dev);
-	struct rcar_du_lvdsenc *lvds;
-	unsigned int i;
-	int ret;
-
-	for (i = 0; i < rcdu->info->num_lvds; ++i) {
-		lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
-		if (lvds == NULL)
-			return -ENOMEM;
-
-		lvds->dev = rcdu;
-		lvds->index = i;
-		lvds->input = i ? RCAR_LVDS_INPUT_DU1 : RCAR_LVDS_INPUT_DU0;
-		lvds->enabled = false;
-
-		ret = rcar_du_lvdsenc_get_resources(lvds, pdev);
-		if (ret < 0)
-			return ret;
-
-		rcdu->lvds[i] = lvds;
-	}
-
-	return 0;
-}
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h
deleted file mode 100644
index 7218ac89333e..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * rcar_du_lvdsenc.h  --  R-Car Display Unit LVDS Encoder
- *
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __RCAR_DU_LVDSENC_H__
-#define __RCAR_DU_LVDSENC_H__
-
-#include <linux/io.h>
-#include <linux/module.h>
-
-struct rcar_drm_crtc;
-struct rcar_du_lvdsenc;
-
-enum rcar_lvds_input {
-	RCAR_LVDS_INPUT_DU0,
-	RCAR_LVDS_INPUT_DU1,
-	RCAR_LVDS_INPUT_DU2,
-};
-
-/* Keep in sync with the LVDCR0.LVMD hardware register values. */
-enum rcar_lvds_mode {
-	RCAR_LVDS_MODE_JEIDA = 0,
-	RCAR_LVDS_MODE_MIRROR = 1,
-	RCAR_LVDS_MODE_VESA = 4,
-};
-
-#if IS_ENABLED(CONFIG_DRM_RCAR_LVDS)
-int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu);
-void rcar_du_lvdsenc_set_mode(struct rcar_du_lvdsenc *lvds,
-			      enum rcar_lvds_mode mode);
-int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds,
-			   struct drm_crtc *crtc, bool enable);
-void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
-				  struct drm_display_mode *mode);
-#else
-static inline int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu)
-{
-	return 0;
-}
-static inline void rcar_du_lvdsenc_set_mode(struct rcar_du_lvdsenc *lvds,
-					    enum rcar_lvds_mode mode)
-{
-}
-static inline int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds,
-					 struct drm_crtc *crtc, bool enable)
-{
-	return 0;
-}
-static inline void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
-						struct drm_display_mode *mode)
-{
-}
-#endif
-
-#endif /* __RCAR_DU_LVDSENC_H__ */
diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c
new file mode 100644
index 000000000000..0a5aa39b1967
--- /dev/null
+++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
@@ -0,0 +1,524 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * rcar_lvds.c  --  R-Car LVDS Encoder
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_panel.h>
+
+#include "rcar_lvds_regs.h"
+
+/* Keep in sync with the LVDCR0.LVMD hardware register values. */
+enum rcar_lvds_mode {
+	RCAR_LVDS_MODE_JEIDA = 0,
+	RCAR_LVDS_MODE_MIRROR = 1,
+	RCAR_LVDS_MODE_VESA = 4,
+};
+
+#define RCAR_LVDS_QUIRK_LANES	(1 << 0)	/* LVDS lanes 1 and 3 inverted */
+
+struct rcar_lvds_device_info {
+	unsigned int gen;
+	unsigned int quirks;
+};
+
+struct rcar_lvds {
+	struct device *dev;
+	const struct rcar_lvds_device_info *info;
+
+	struct drm_bridge bridge;
+
+	struct drm_bridge *next_bridge;
+	struct drm_connector connector;
+	struct drm_panel *panel;
+
+	void __iomem *mmio;
+	struct clk *clock;
+	bool enabled;
+
+	struct drm_display_mode display_mode;
+	enum rcar_lvds_mode mode;
+};
+
+#define bridge_to_rcar_lvds(bridge) \
+	container_of(bridge, struct rcar_lvds, bridge)
+
+#define connector_to_rcar_lvds(connector) \
+	container_of(connector, struct rcar_lvds, connector)
+
+static void rcar_lvds_write(struct rcar_lvds *lvds, u32 reg, u32 data)
+{
+	iowrite32(data, lvds->mmio + reg);
+}
+
+/* -----------------------------------------------------------------------------
+ * Connector & Panel
+ */
+
+static int rcar_lvds_connector_get_modes(struct drm_connector *connector)
+{
+	struct rcar_lvds *lvds = connector_to_rcar_lvds(connector);
+
+	return drm_panel_get_modes(lvds->panel);
+}
+
+static int rcar_lvds_connector_atomic_check(struct drm_connector *connector,
+					    struct drm_connector_state *state)
+{
+	struct rcar_lvds *lvds = connector_to_rcar_lvds(connector);
+	const struct drm_display_mode *panel_mode;
+	struct drm_crtc_state *crtc_state;
+
+	if (list_empty(&connector->modes)) {
+		dev_dbg(lvds->dev, "connector: empty modes list\n");
+		return -EINVAL;
+	}
+
+	panel_mode = list_first_entry(&connector->modes,
+				      struct drm_display_mode, head);
+
+	/* We're not allowed to modify the resolution. */
+	crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
+	if (IS_ERR(crtc_state))
+		return PTR_ERR(crtc_state);
+
+	if (crtc_state->mode.hdisplay != panel_mode->hdisplay ||
+	    crtc_state->mode.vdisplay != panel_mode->vdisplay)
+		return -EINVAL;
+
+	/* The flat panel mode is fixed, just copy it to the adjusted mode. */
+	drm_mode_copy(&crtc_state->adjusted_mode, panel_mode);
+
+	return 0;
+}
+
+static const struct drm_connector_helper_funcs rcar_lvds_conn_helper_funcs = {
+	.get_modes = rcar_lvds_connector_get_modes,
+	.atomic_check = rcar_lvds_connector_atomic_check,
+};
+
+static const struct drm_connector_funcs rcar_lvds_conn_funcs = {
+	.reset = drm_atomic_helper_connector_reset,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+/* -----------------------------------------------------------------------------
+ * Bridge
+ */
+
+static u32 rcar_lvds_lvdpllcr_gen2(unsigned int freq)
+{
+	if (freq < 39000)
+		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M;
+	else if (freq < 61000)
+		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M;
+	else if (freq < 121000)
+		return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M;
+	else
+		return LVDPLLCR_PLLDLYCNT_150M;
+}
+
+static u32 rcar_lvds_lvdpllcr_gen3(unsigned int freq)
+{
+	if (freq < 42000)
+		return LVDPLLCR_PLLDIVCNT_42M;
+	else if (freq < 85000)
+		return LVDPLLCR_PLLDIVCNT_85M;
+	else if (freq < 128000)
+		return LVDPLLCR_PLLDIVCNT_128M;
+	else
+		return LVDPLLCR_PLLDIVCNT_148M;
+}
+
+static void rcar_lvds_enable(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+	const struct drm_display_mode *mode = &lvds->display_mode;
+	/*
+	 * FIXME: We should really retrieve the CRTC through the state, but how
+	 * do we get a state pointer?
+	 */
+	struct drm_crtc *crtc = lvds->bridge.encoder->crtc;
+	u32 lvdpllcr;
+	u32 lvdhcr;
+	u32 lvdcr0;
+	int ret;
+
+	WARN_ON(lvds->enabled);
+
+	ret = clk_prepare_enable(lvds->clock);
+	if (ret < 0)
+		return;
+
+	/*
+	 * Hardcode the channels and control signals routing for now.
+	 *
+	 * HSYNC -> CTRL0
+	 * VSYNC -> CTRL1
+	 * DISP  -> CTRL2
+	 * 0     -> CTRL3
+	 */
+	rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO |
+			LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC |
+			LVDCTRCR_CTR0SEL_HSYNC);
+
+	if (lvds->info->quirks & RCAR_LVDS_QUIRK_LANES)
+		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3)
+		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1);
+	else
+		lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1)
+		       | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3);
+
+	rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
+
+	/* PLL clock configuration. */
+	if (lvds->info->gen < 3)
+		lvdpllcr = rcar_lvds_lvdpllcr_gen2(mode->clock);
+	else
+		lvdpllcr = rcar_lvds_lvdpllcr_gen3(mode->clock);
+	rcar_lvds_write(lvds, LVDPLLCR, lvdpllcr);
+
+	/* Set the LVDS mode and select the input. */
+	lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT;
+	if (drm_crtc_index(crtc) == 2)
+		lvdcr0 |= LVDCR0_DUSEL;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
+	/* Turn all the channels on. */
+	rcar_lvds_write(lvds, LVDCR1,
+			LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
+			LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
+
+	if (lvds->info->gen < 3) {
+		/* Enable LVDS operation and turn the bias circuitry on. */
+		lvdcr0 |= LVDCR0_BEN | LVDCR0_LVEN;
+		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+	}
+
+	/* Turn the PLL on. */
+	lvdcr0 |= LVDCR0_PLLON;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
+	if (lvds->info->gen > 2) {
+		/* Set LVDS normal mode. */
+		lvdcr0 |= LVDCR0_PWD;
+		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+	}
+
+	/* Wait for the startup delay. */
+	usleep_range(100, 150);
+
+	/* Turn the output on. */
+	lvdcr0 |= LVDCR0_LVRES;
+	rcar_lvds_write(lvds, LVDCR0, lvdcr0);
+
+	if (lvds->panel) {
+		drm_panel_prepare(lvds->panel);
+		drm_panel_enable(lvds->panel);
+	}
+
+	lvds->enabled = true;
+}
+
+static void rcar_lvds_disable(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+
+	WARN_ON(!lvds->enabled);
+
+	if (lvds->panel) {
+		drm_panel_disable(lvds->panel);
+		drm_panel_unprepare(lvds->panel);
+	}
+
+	rcar_lvds_write(lvds, LVDCR0, 0);
+	rcar_lvds_write(lvds, LVDCR1, 0);
+
+	clk_disable_unprepare(lvds->clock);
+
+	lvds->enabled = false;
+}
+
+static bool rcar_lvds_mode_fixup(struct drm_bridge *bridge,
+				 const struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	/*
+	 * The internal LVDS encoder has a restricted clock frequency operating
+	 * range (31MHz to 148.5MHz). Clamp the clock accordingly.
+	 */
+	adjusted_mode->clock = clamp(adjusted_mode->clock, 31000, 148500);
+
+	return true;
+}
+
+static void rcar_lvds_get_lvds_mode(struct rcar_lvds *lvds)
+{
+	struct drm_display_info *info = &lvds->connector.display_info;
+	enum rcar_lvds_mode mode;
+
+	/*
+	 * There is no API yet to retrieve LVDS mode from a bridge, only panels
+	 * are supported.
+	 */
+	if (!lvds->panel)
+		return;
+
+	if (!info->num_bus_formats || !info->bus_formats) {
+		dev_err(lvds->dev, "no LVDS bus format reported\n");
+		return;
+	}
+
+	switch (info->bus_formats[0]) {
+	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+	case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
+		mode = RCAR_LVDS_MODE_JEIDA;
+		break;
+	case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
+		mode = RCAR_LVDS_MODE_VESA;
+		break;
+	default:
+		dev_err(lvds->dev, "unsupported LVDS bus format 0x%04x\n",
+			info->bus_formats[0]);
+		return;
+	}
+
+	if (info->bus_flags & DRM_BUS_FLAG_DATA_LSB_TO_MSB)
+		mode |= RCAR_LVDS_MODE_MIRROR;
+
+	lvds->mode = mode;
+}
+
+static void rcar_lvds_mode_set(struct drm_bridge *bridge,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+
+	WARN_ON(lvds->enabled);
+
+	lvds->display_mode = *adjusted_mode;
+
+	rcar_lvds_get_lvds_mode(lvds);
+}
+
+static int rcar_lvds_attach(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+	struct drm_connector *connector = &lvds->connector;
+	struct drm_encoder *encoder = bridge->encoder;
+	int ret;
+
+	/* If we have a next bridge just attach it. */
+	if (lvds->next_bridge)
+		return drm_bridge_attach(bridge->encoder, lvds->next_bridge,
+					 bridge);
+
+	/* Otherwise we have a panel, create a connector. */
+	ret = drm_connector_init(bridge->dev, connector, &rcar_lvds_conn_funcs,
+				 DRM_MODE_CONNECTOR_LVDS);
+	if (ret < 0)
+		return ret;
+
+	drm_connector_helper_add(connector, &rcar_lvds_conn_helper_funcs);
+
+	ret = drm_mode_connector_attach_encoder(connector, encoder);
+	if (ret < 0)
+		return ret;
+
+	return drm_panel_attach(lvds->panel, connector);
+}
+
+static void rcar_lvds_detach(struct drm_bridge *bridge)
+{
+	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
+
+	if (lvds->panel)
+		drm_panel_detach(lvds->panel);
+}
+
+static const struct drm_bridge_funcs rcar_lvds_bridge_ops = {
+	.attach = rcar_lvds_attach,
+	.detach = rcar_lvds_detach,
+	.enable = rcar_lvds_enable,
+	.disable = rcar_lvds_disable,
+	.mode_fixup = rcar_lvds_mode_fixup,
+	.mode_set = rcar_lvds_mode_set,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe & Remove
+ */
+
+static int rcar_lvds_parse_dt(struct rcar_lvds *lvds)
+{
+	struct device_node *local_output = NULL;
+	struct device_node *remote_input = NULL;
+	struct device_node *remote = NULL;
+	struct device_node *node;
+	bool is_bridge = false;
+	int ret = 0;
+
+	local_output = of_graph_get_endpoint_by_regs(lvds->dev->of_node, 1, 0);
+	if (!local_output) {
+		dev_dbg(lvds->dev, "unconnected port@1\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Locate the connected entity and infer its type from the number of
+	 * endpoints.
+	 */
+	remote = of_graph_get_remote_port_parent(local_output);
+	if (!remote) {
+		dev_dbg(lvds->dev, "unconnected endpoint %pOF\n", local_output);
+		ret = -ENODEV;
+		goto done;
+	}
+
+	if (!of_device_is_available(remote)) {
+		dev_dbg(lvds->dev, "connected entity %pOF is disabled\n",
+			remote);
+		ret = -ENODEV;
+		goto done;
+	}
+
+	remote_input = of_graph_get_remote_endpoint(local_output);
+
+	for_each_endpoint_of_node(remote, node) {
+		if (node != remote_input) {
+			/*
+			 * We've found one endpoint other than the input, this
+			 * must be a bridge.
+			 */
+			is_bridge = true;
+			of_node_put(node);
+			break;
+		}
+	}
+
+	if (is_bridge) {
+		lvds->next_bridge = of_drm_find_bridge(remote);
+		if (!lvds->next_bridge)
+			ret = -EPROBE_DEFER;
+	} else {
+		lvds->panel = of_drm_find_panel(remote);
+		if (!lvds->panel)
+			ret = -EPROBE_DEFER;
+	}
+
+done:
+	of_node_put(local_output);
+	of_node_put(remote_input);
+	of_node_put(remote);
+
+	return ret;
+}
+
+static int rcar_lvds_probe(struct platform_device *pdev)
+{
+	struct rcar_lvds *lvds;
+	struct resource *mem;
+	int ret;
+
+	lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
+	if (lvds == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, lvds);
+
+	lvds->dev = &pdev->dev;
+	lvds->info = of_device_get_match_data(&pdev->dev);
+	lvds->enabled = false;
+
+	ret = rcar_lvds_parse_dt(lvds);
+	if (ret < 0)
+		return ret;
+
+	lvds->bridge.driver_private = lvds;
+	lvds->bridge.funcs = &rcar_lvds_bridge_ops;
+	lvds->bridge.of_node = pdev->dev.of_node;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lvds->mmio = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(lvds->mmio))
+		return PTR_ERR(lvds->mmio);
+
+	lvds->clock = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(lvds->clock)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return PTR_ERR(lvds->clock);
+	}
+
+	drm_bridge_add(&lvds->bridge);
+
+	return 0;
+}
+
+static int rcar_lvds_remove(struct platform_device *pdev)
+{
+	struct rcar_lvds *lvds = platform_get_drvdata(pdev);
+
+	drm_bridge_remove(&lvds->bridge);
+
+	return 0;
+}
+
+static const struct rcar_lvds_device_info rcar_lvds_gen2_info = {
+	.gen = 2,
+};
+
+static const struct rcar_lvds_device_info rcar_lvds_r8a7790_info = {
+	.gen = 2,
+	.quirks = RCAR_LVDS_QUIRK_LANES,
+};
+
+static const struct rcar_lvds_device_info rcar_lvds_gen3_info = {
+	.gen = 3,
+};
+
+static const struct of_device_id rcar_lvds_of_table[] = {
+	{ .compatible = "renesas,r8a7743-lvds", .data = &rcar_lvds_gen2_info },
+	{ .compatible = "renesas,r8a7790-lvds", .data = &rcar_lvds_r8a7790_info },
+	{ .compatible = "renesas,r8a7791-lvds", .data = &rcar_lvds_gen2_info },
+	{ .compatible = "renesas,r8a7793-lvds", .data = &rcar_lvds_gen2_info },
+	{ .compatible = "renesas,r8a7795-lvds", .data = &rcar_lvds_gen3_info },
+	{ .compatible = "renesas,r8a7796-lvds", .data = &rcar_lvds_gen3_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, rcar_lvds_of_table);
+
+static struct platform_driver rcar_lvds_platform_driver = {
+	.probe		= rcar_lvds_probe,
+	.remove		= rcar_lvds_remove,
+	.driver		= {
+		.name	= "rcar-lvds",
+		.of_match_table = rcar_lvds_of_table,
+	},
+};
+
+module_platform_driver(rcar_lvds_platform_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_DESCRIPTION("Renesas R-Car LVDS Encoder Driver");
+MODULE_LICENSE("GPL");
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v5 6/8] i2c: demux: Use changeset helpers for clarity

[Geert Uytterhoeven]

Hi Laurent,

On Thu, Feb 22, 2018 at 1:05 AM, Laurent Pinchart
<laurent.pinchart+renesas@ideasonboard.com> wrote:
> From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
>
> The changeset helpers are easier to use, use them instead of
> using the static property.
>
> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
> Acked-by: Wolfram Sang <wsa@the-dreams.de>
> ["okay" -> "ok"]

Why? ePAPR says "okay", "disabled", "fail", or "fail-sss".

Sorry for missing this in the previous round.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v5 6/8] i2c: demux: Use changeset helpers for clarity

[Geert Uytterhoeven]

Hi Laurent,

On Thu, Feb 22, 2018 at 1:05 AM, Laurent Pinchart
<laurent.pinchart+renesas@ideasonboard.com> wrote:
> From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
>
> The changeset helpers are easier to use, use them instead of
> using the static property.
>
> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
> Acked-by: Wolfram Sang <wsa@the-dreams.de>
> ["okay" -> "ok"]

Why? ePAPR says "okay", "disabled", "fail", or "fail-sss".

Sorry for missing this in the previous round.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v5 6/8] i2c: demux: Use changeset helpers for clarity

[Laurent Pinchart]

Hi Geert,

On Thursday, 22 February 2018 11:26:44 EET Geert Uytterhoeven wrote:
> On Thu, Feb 22, 2018 at 1:05 AM, Laurent Pinchart wrote:
> > From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
> > 
> > The changeset helpers are easier to use, use them instead of
> > using the static property.
> > 
> > Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
> > Acked-by: Wolfram Sang <wsa@the-dreams.de>
> > ["okay" -> "ok"]
> 
> Why? ePAPR says "okay", "disabled", "fail", or "fail-sss".
> 
> Sorry for missing this in the previous round.

That was per Wolfram's request, and because the existing code uses "ok". I'm 
personally fine with any.

-- 
Regards,

Laurent Pinchart

Re: [PATCH v5 6/8] i2c: demux: Use changeset helpers for clarity

[Laurent Pinchart]

Hi Geert,

On Thursday, 22 February 2018 11:26:44 EET Geert Uytterhoeven wrote:
> On Thu, Feb 22, 2018 at 1:05 AM, Laurent Pinchart wrote:
> > From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
> > 
> > The changeset helpers are easier to use, use them instead of
> > using the static property.
> > 
> > Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
> > Acked-by: Wolfram Sang <wsa@the-dreams.de>
> > ["okay" -> "ok"]
> 
> Why? ePAPR says "okay", "disabled", "fail", or "fail-sss".
> 
> Sorry for missing this in the previous round.

That was per Wolfram's request, and because the existing code uses "ok". I'm 
personally fine with any.

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v5 6/8] i2c: demux: Use changeset helpers for clarity

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 322 bytes --]


> > Why? ePAPR says "okay", "disabled", "fail", or "fail-sss".
> > 
> > Sorry for missing this in the previous round.
> 
> That was per Wolfram's request, and because the existing code uses "ok". I'm 
> personally fine with any.

I did? Well, today I don't have a strong preference. Any is fine with
me, too.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v5 6/8] i2c: demux: Use changeset helpers for clarity

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 322 bytes --]


> > Why? ePAPR says "okay", "disabled", "fail", or "fail-sss".
> > 
> > Sorry for missing this in the previous round.
> 
> That was per Wolfram's request, and because the existing code uses "ok". I'm 
> personally fine with any.

I did? Well, today I don't have a strong preference. Any is fine with
me, too.


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel