* [PATCH] tee: correct max value for id allocation
@ 2018-01-15 9:27 Peng Fan
2018-02-23 2:43 ` Peng Fan
0 siblings, 1 reply; 3+ messages in thread
From: Peng Fan @ 2018-01-15 9:27 UTC (permalink / raw)
To: jens.wiklander; +Cc: linux-kernel, linux-imx, van.freenix, Peng Fan
The privileged dev id range is [TEE_NUM_DEVICES / 2, TEE_NUM_DEVICES).
The non-privileged dev id range is [0, TEE_NUM_DEVICES / 2).
So when finding a slot for them, need to use different max value.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
---
drivers/tee/tee_core.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
index 3d49ac2e3c84..d1f4ecdbc8cc 100644
--- a/drivers/tee/tee_core.c
+++ b/drivers/tee/tee_core.c
@@ -701,7 +701,7 @@ struct tee_device *tee_device_alloc(const struct tee_desc *teedesc,
{
struct tee_device *teedev;
void *ret;
- int rc;
+ int rc, max_id;
int offs = 0;
if (!teedesc || !teedesc->name || !teedesc->ops ||
@@ -715,16 +715,20 @@ struct tee_device *tee_device_alloc(const struct tee_desc *teedesc,
goto err;
}
- if (teedesc->flags & TEE_DESC_PRIVILEGED)
+ max_id = TEE_NUM_DEVICES / 2;
+
+ if (teedesc->flags & TEE_DESC_PRIVILEGED) {
offs = TEE_NUM_DEVICES / 2;
+ max_id = TEE_NUM_DEVICES;
+ }
spin_lock(&driver_lock);
- teedev->id = find_next_zero_bit(dev_mask, TEE_NUM_DEVICES, offs);
- if (teedev->id < TEE_NUM_DEVICES)
+ teedev->id = find_next_zero_bit(dev_mask, max_id, offs);
+ if (teedev->id < max_id)
set_bit(teedev->id, dev_mask);
spin_unlock(&driver_lock);
- if (teedev->id >= TEE_NUM_DEVICES) {
+ if (teedev->id >= max_id) {
ret = ERR_PTR(-ENOMEM);
goto err;
}
--
2.14.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] tee: correct max value for id allocation
2018-01-15 9:27 [PATCH] tee: correct max value for id allocation Peng Fan
@ 2018-02-23 2:43 ` Peng Fan
2018-02-26 6:47 ` Jens Wiklander
0 siblings, 1 reply; 3+ messages in thread
From: Peng Fan @ 2018-02-23 2:43 UTC (permalink / raw)
To: Peng Fan; +Cc: jens.wiklander, linux-kernel, linux-imx
Hi Jens,
Any comments on this patch?
Thanks,
Peng
On Mon, Jan 15, 2018 at 05:27:35PM +0800, Peng Fan wrote:
>The privileged dev id range is [TEE_NUM_DEVICES / 2, TEE_NUM_DEVICES).
>The non-privileged dev id range is [0, TEE_NUM_DEVICES / 2).
>
>So when finding a slot for them, need to use different max value.
>
>Signed-off-by: Peng Fan <peng.fan@nxp.com>
>Cc: Jens Wiklander <jens.wiklander@linaro.org>
>---
> drivers/tee/tee_core.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
>diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
>index 3d49ac2e3c84..d1f4ecdbc8cc 100644
>--- a/drivers/tee/tee_core.c
>+++ b/drivers/tee/tee_core.c
>@@ -701,7 +701,7 @@ struct tee_device *tee_device_alloc(const struct tee_desc *teedesc,
> {
> struct tee_device *teedev;
> void *ret;
>- int rc;
>+ int rc, max_id;
> int offs = 0;
>
> if (!teedesc || !teedesc->name || !teedesc->ops ||
>@@ -715,16 +715,20 @@ struct tee_device *tee_device_alloc(const struct tee_desc *teedesc,
> goto err;
> }
>
>- if (teedesc->flags & TEE_DESC_PRIVILEGED)
>+ max_id = TEE_NUM_DEVICES / 2;
>+
>+ if (teedesc->flags & TEE_DESC_PRIVILEGED) {
> offs = TEE_NUM_DEVICES / 2;
>+ max_id = TEE_NUM_DEVICES;
>+ }
>
> spin_lock(&driver_lock);
>- teedev->id = find_next_zero_bit(dev_mask, TEE_NUM_DEVICES, offs);
>- if (teedev->id < TEE_NUM_DEVICES)
>+ teedev->id = find_next_zero_bit(dev_mask, max_id, offs);
>+ if (teedev->id < max_id)
> set_bit(teedev->id, dev_mask);
> spin_unlock(&driver_lock);
>
>- if (teedev->id >= TEE_NUM_DEVICES) {
>+ if (teedev->id >= max_id) {
> ret = ERR_PTR(-ENOMEM);
> goto err;
> }
>--
>2.14.1
>
--
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] tee: correct max value for id allocation
2018-02-23 2:43 ` Peng Fan
@ 2018-02-26 6:47 ` Jens Wiklander
0 siblings, 0 replies; 3+ messages in thread
From: Jens Wiklander @ 2018-02-26 6:47 UTC (permalink / raw)
To: Peng Fan; +Cc: Peng Fan, Linux Kernel Mailing List, linux-imx
On Fri, Feb 23, 2018 at 3:43 AM, Peng Fan <van.freenix@gmail.com> wrote:
> Hi Jens,
>
> Any comments on this patch?
>
> Thanks,
> Peng
Sorry, forgot about this one. Looks good to me, I'll pick it up.
Thanks,
Jens
> On Mon, Jan 15, 2018 at 05:27:35PM +0800, Peng Fan wrote:
>>The privileged dev id range is [TEE_NUM_DEVICES / 2, TEE_NUM_DEVICES).
>>The non-privileged dev id range is [0, TEE_NUM_DEVICES / 2).
>>
>>So when finding a slot for them, need to use different max value.
>>
>>Signed-off-by: Peng Fan <peng.fan@nxp.com>
>>Cc: Jens Wiklander <jens.wiklander@linaro.org>
>>---
>> drivers/tee/tee_core.c | 14 +++++++++-----
>> 1 file changed, 9 insertions(+), 5 deletions(-)
>>
>>diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
>>index 3d49ac2e3c84..d1f4ecdbc8cc 100644
>>--- a/drivers/tee/tee_core.c
>>+++ b/drivers/tee/tee_core.c
>>@@ -701,7 +701,7 @@ struct tee_device *tee_device_alloc(const struct tee_desc *teedesc,
>> {
>> struct tee_device *teedev;
>> void *ret;
>>- int rc;
>>+ int rc, max_id;
>> int offs = 0;
>>
>> if (!teedesc || !teedesc->name || !teedesc->ops ||
>>@@ -715,16 +715,20 @@ struct tee_device *tee_device_alloc(const struct tee_desc *teedesc,
>> goto err;
>> }
>>
>>- if (teedesc->flags & TEE_DESC_PRIVILEGED)
>>+ max_id = TEE_NUM_DEVICES / 2;
>>+
>>+ if (teedesc->flags & TEE_DESC_PRIVILEGED) {
>> offs = TEE_NUM_DEVICES / 2;
>>+ max_id = TEE_NUM_DEVICES;
>>+ }
>>
>> spin_lock(&driver_lock);
>>- teedev->id = find_next_zero_bit(dev_mask, TEE_NUM_DEVICES, offs);
>>- if (teedev->id < TEE_NUM_DEVICES)
>>+ teedev->id = find_next_zero_bit(dev_mask, max_id, offs);
>>+ if (teedev->id < max_id)
>> set_bit(teedev->id, dev_mask);
>> spin_unlock(&driver_lock);
>>
>>- if (teedev->id >= TEE_NUM_DEVICES) {
>>+ if (teedev->id >= max_id) {
>> ret = ERR_PTR(-ENOMEM);
>> goto err;
>> }
>>--
>>2.14.1
>>
>
> --
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-02-26 6:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-15 9:27 [PATCH] tee: correct max value for id allocation Peng Fan
2018-02-23 2:43 ` Peng Fan
2018-02-26 6:47 ` Jens Wiklander
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.