All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] ARM64: dts: marvell: armada-cp110: Add apb_pclk clock for the uart nodes
@ 2018-03-01 13:18 Gregory CLEMENT
  2018-03-09 16:50 ` Gregory CLEMENT
  0 siblings, 1 reply; 2+ messages in thread
From: Gregory CLEMENT @ 2018-03-01 13:18 UTC (permalink / raw)
  To: linux-arm-kernel

This extra clock is needed to access the registers of the UARTs used on
CP110 component of the Armada 7K/8K SoCs.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index d3f422f8f086..355bb295e4d9 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -303,7 +303,9 @@
 			reg-shift = <2>;
 			interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
 			reg-io-width = <1>;
-			clocks = <&CP110_LABEL(clk) 1 21>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
 			status = "disabled";
 		};
 
@@ -313,7 +315,9 @@
 			reg-shift = <2>;
 			interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
 			reg-io-width = <1>;
-			clocks = <&CP110_LABEL(clk) 1 21>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
 			status = "disabled";
 		};
 
@@ -323,7 +327,9 @@
 			reg-shift = <2>;
 			interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
 			reg-io-width = <1>;
-			clocks = <&CP110_LABEL(clk) 1 21>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
 			status = "disabled";
 		};
 
@@ -333,7 +339,9 @@
 			reg-shift = <2>;
 			interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
 			reg-io-width = <1>;
-			clocks = <&CP110_LABEL(clk) 1 21>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP110_LABEL(clk) 1 21>,
+				 <&CP110_LABEL(clk) 1 17>;
 			status = "disabled";
 		};
 
-- 
2.16.1

^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [PATCH] ARM64: dts: marvell: armada-cp110: Add apb_pclk clock for the uart nodes
  2018-03-01 13:18 [PATCH] ARM64: dts: marvell: armada-cp110: Add apb_pclk clock for the uart nodes Gregory CLEMENT
@ 2018-03-09 16:50 ` Gregory CLEMENT
  0 siblings, 0 replies; 2+ messages in thread
From: Gregory CLEMENT @ 2018-03-09 16:50 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,
 
 On jeu., mars 01 2018, Gregory CLEMENT <gregory.clement@bootlin.com> wrote:

> This extra clock is needed to access the registers of the UARTs used on
> CP110 component of the Armada 7K/8K SoCs.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Applied on mvebu/dt64

Gregory

> ---
>  arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 16 ++++++++++++----
>  1 file changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> index d3f422f8f086..355bb295e4d9 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> @@ -303,7 +303,9 @@
>  			reg-shift = <2>;
>  			interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
>  			reg-io-width = <1>;
> -			clocks = <&CP110_LABEL(clk) 1 21>;
> +			clock-names = "baudclk", "apb_pclk";
> +			clocks = <&CP110_LABEL(clk) 1 21>,
> +				 <&CP110_LABEL(clk) 1 17>;
>  			status = "disabled";
>  		};
>  
> @@ -313,7 +315,9 @@
>  			reg-shift = <2>;
>  			interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
>  			reg-io-width = <1>;
> -			clocks = <&CP110_LABEL(clk) 1 21>;
> +			clock-names = "baudclk", "apb_pclk";
> +			clocks = <&CP110_LABEL(clk) 1 21>,
> +				 <&CP110_LABEL(clk) 1 17>;
>  			status = "disabled";
>  		};
>  
> @@ -323,7 +327,9 @@
>  			reg-shift = <2>;
>  			interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
>  			reg-io-width = <1>;
> -			clocks = <&CP110_LABEL(clk) 1 21>;
> +			clock-names = "baudclk", "apb_pclk";
> +			clocks = <&CP110_LABEL(clk) 1 21>,
> +				 <&CP110_LABEL(clk) 1 17>;
>  			status = "disabled";
>  		};
>  
> @@ -333,7 +339,9 @@
>  			reg-shift = <2>;
>  			interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
>  			reg-io-width = <1>;
> -			clocks = <&CP110_LABEL(clk) 1 21>;
> +			clock-names = "baudclk", "apb_pclk";
> +			clocks = <&CP110_LABEL(clk) 1 21>,
> +				 <&CP110_LABEL(clk) 1 17>;
>  			status = "disabled";
>  		};
>  
> -- 
> 2.16.1
>

-- 
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2018-03-09 16:50 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-01 13:18 [PATCH] ARM64: dts: marvell: armada-cp110: Add apb_pclk clock for the uart nodes Gregory CLEMENT
2018-03-09 16:50 ` Gregory CLEMENT

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.