From: "Alvaro G. M." <alvaro.gamez@hazent.com>
To: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>
Subject: Bug: Microblaze stopped booting after 0fa1c579349fdd90173381712ad78aa99c09d38b
Date: Fri, 9 Mar 2018 13:51:07 +0100 [thread overview]
Message-ID: <20180309125106.GA1644@salem.gmr.ssr.upm.es> (raw)
Hi,
I've found via git bisect that 0fa1c579349fdd90173381712ad78aa99c09d38b
makes microblaze unbootable.
I'm sorry I can't provide any console output, as nothing appears at all,
even when setting earlyprintk (or at least I wasn't able to get anything
back!).
I'm providing both dts and defconfig in case it helps.
Best regards
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_KERNEL_BASE_ADDR=0x80000000
CONFIG_XILINX_MICROBLAZE0_FAMILY="artix7"
CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
CONFIG_HZ_100=y
CONFIG_MMU=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyUL0,9600"
CONFIG_HIGHMEM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_NETDEVICES=y
CONFIG_XILINX_EMACLITE=y
CONFIG_DP83848_PHY=y
CONFIG_DP83620_PHY=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_XILINX=y
CONFIG_SPI=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_XILINX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_FB=y
CONFIG_FB_XILINX=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_IIO=y
CONFIG_AD799X=y
CONFIG_XILINX_XADC=y
CONFIG_PWM=y
CONFIG_JFFS2_FS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SLAB=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRYPTO_MANAGER=y
/dts-v1/;
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,microblaze";
model = "Xilinx MicroBlaze";
cpus {
#address-cells = <1>;
#cpus = <1>;
#size-cells = <0>;
microblaze_0: cpu@0 {
bus-handle = <&amba_pl>;
clock-frequency = <83250000>;
clocks = <&clk_cpu>;
compatible = "xlnx,microblaze-9.5";
d-cache-baseaddr = <0x80000000>;
d-cache-highaddr = <0x8fffffff>;
d-cache-line-size = <0x10>;
d-cache-size = <0x8000>;
device_type = "cpu";
i-cache-baseaddr = <0x80000000>;
i-cache-highaddr = <0x8fffffff>;
i-cache-line-size = <0x20>;
i-cache-size = <0x8000>;
interrupt-handle = <µblaze_0_axi_intc>;
model = "microblaze,9.5";
timebase-frequency = <83250000>;
xlnx,addr-tag-bits = <0xd>;
xlnx,allow-dcache-wr = <0x1>;
xlnx,allow-icache-wr = <0x1>;
xlnx,area-optimized = <0x0>;
xlnx,async-interrupt = <0x1>;
xlnx,avoid-primitives = <0x0>;
xlnx,base-vectors = <0x00000000>;
xlnx,branch-target-cache-size = <0x0>;
xlnx,cache-byte-size = <0x8000>;
xlnx,d-axi = <0x1>;
xlnx,d-lmb = <0x1>;
xlnx,d-lmb-mon = <0x0>;
xlnx,data-size = <0x20>;
xlnx,dc-axi-mon = <0x0>;
xlnx,dcache-addr-tag = <0xd>;
xlnx,dcache-always-used = <0x1>;
xlnx,dcache-byte-size = <0x8000>;
xlnx,dcache-data-width = <0x0>;
xlnx,dcache-force-tag-lutram = <0x0>;
xlnx,dcache-line-len = <0x4>;
xlnx,dcache-use-writeback = <0x0>;
xlnx,dcache-victims = <0x8>;
xlnx,debug-counter-width = <0x20>;
xlnx,debug-enabled = <0x1>;
xlnx,debug-event-counters = <0x5>;
xlnx,debug-external-trace = <0x0>;
xlnx,debug-latency-counters = <0x1>;
xlnx,debug-profile-size = <0x0>;
xlnx,debug-trace-size = <0x2000>;
xlnx,div-zero-exception = <0x1>;
xlnx,dp-axi-mon = <0x0>;
xlnx,dynamic-bus-sizing = <0x0>;
xlnx,ecc-use-ce-exception = <0x0>;
xlnx,edge-is-positive = <0x1>;
xlnx,enable-discrete-ports = <0x0>;
xlnx,endianness = <0x1>;
xlnx,fault-tolerant = <0x0>;
xlnx,fpu-exception = <0x0>;
xlnx,freq = <0x4f64b50>;
xlnx,fsl-exception = <0x0>;
xlnx,fsl-links = <0x0>;
xlnx,i-axi = <0x0>;
xlnx,i-lmb = <0x1>;
xlnx,i-lmb-mon = <0x0>;
xlnx,ic-axi-mon = <0x0>;
xlnx,icache-always-used = <0x1>;
xlnx,icache-data-width = <0x0>;
xlnx,icache-force-tag-lutram = <0x0>;
xlnx,icache-line-len = <0x8>;
xlnx,icache-streams = <0x1>;
xlnx,icache-victims = <0x8>;
xlnx,ill-opcode-exception = <0x1>;
xlnx,imprecise-exceptions = <0x0>;
xlnx,interconnect = <0x2>;
xlnx,interrupt-is-edge = <0x0>;
xlnx,interrupt-mon = <0x0>;
xlnx,ip-axi-mon = <0x0>;
xlnx,lockstep-select = <0x0>;
xlnx,lockstep-slave = <0x0>;
xlnx,mmu-dtlb-size = <0x4>;
xlnx,mmu-itlb-size = <0x2>;
xlnx,mmu-privileged-instr = <0x0>;
xlnx,mmu-tlb-access = <0x3>;
xlnx,mmu-zones = <0x2>;
xlnx,num-sync-ff-clk = <0x2>;
xlnx,num-sync-ff-clk-debug = <0x2>;
xlnx,num-sync-ff-clk-irq = <0x1>;
xlnx,num-sync-ff-dbg-clk = <0x1>;
xlnx,number-of-pc-brk = <0x1>;
xlnx,number-of-rd-addr-brk = <0x0>;
xlnx,number-of-wr-addr-brk = <0x0>;
xlnx,opcode-0x0-illegal = <0x1>;
xlnx,optimization = <0x0>;
xlnx,pc-width = <0x20>;
xlnx,pvr = <0x2>;
xlnx,pvr-user1 = <0x00>;
xlnx,pvr-user2 = <0x00000000>;
xlnx,reset-msr = <0x00000000>;
xlnx,sco = <0x0>;
xlnx,trace = <0x0>;
xlnx,unaligned-exceptions = <0x1>;
xlnx,use-barrel = <0x1>;
xlnx,use-branch-target-cache = <0x0>;
xlnx,use-config-reset = <0x0>;
xlnx,use-dcache = <0x1>;
xlnx,use-div = <0x1>;
xlnx,use-ext-brk = <0x0>;
xlnx,use-ext-nm-brk = <0x0>;
xlnx,use-extended-fsl-instr = <0x0>;
xlnx,use-fpu = <0x0>;
xlnx,use-hw-mul = <0x2>;
xlnx,use-icache = <0x1>;
xlnx,use-interrupt = <0x2>;
xlnx,use-mmu = <0x3>;
xlnx,use-msr-instr = <0x1>;
xlnx,use-pcmp-instr = <0x1>;
xlnx,use-reorder-instr = <0x1>;
xlnx,use-stack-protection = <0x0>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
clk_cpu: clk_cpu@0 {
#clock-cells = <0>;
clock-frequency = <83250000>;
clock-output-names = "clk_cpu";
compatible = "fixed-clock";
reg = <0>;
};
clk_bus_0: clk_bus_0@1 {
#clock-cells = <0>;
clock-frequency = <83250000>;
clock-output-names = "clk_bus_0";
compatible = "fixed-clock";
reg = <1>;
};
};
amba_pl: amba_pl {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges ;
axi_ethernetlite_0: ethernet@40e00000 {
compatible = "xlnx,xps-ethernetlite-1.00.a";
device_type = "network";
interrupt-parent = <µblaze_0_axi_intc>;
interrupts = <2 0>;
reg = <0x40e00000 0x10000>;
xlnx,duplex = <0x1>;
xlnx,include-global-buffers = <0x1>;
xlnx,include-internal-loopback = <0x1>;
xlnx,include-mdio = <0x1>;
xlnx,rx-ping-pong = <0x1>;
xlnx,s-axi-id-width = <0x1>;
xlnx,tx-ping-pong = <0x1>;
xlnx,use-internal = <0x0>;
phy-handle = <&phy0>;
axi_ethernetlite_0_mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: phy@0 {
device_type = "ethernet-phy";
reg = <1>;
};
};
};
axi_quad_spi_0: axi_quad_spi@44a00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "xlnx,xps-spi-2.00.a";
interrupt-parent = <µblaze_0_axi_intc>;
interrupts = <3 0>;
reg = <0x44a00000 0x10000>;
xlnx,num-ss-bits = <0x1>;
axi_flash_spi_0: n25q128@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "micron,n25q128a", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <100000000>;
xlnx,num-ss-bits = <0x1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@bitfile {
label = "bitfile";
reg = <0x000000 0x200000>;
};
partition@kernel {
label = "kernel";
reg = <0x200000 0x500000>;
};
partition@rootfs {
label = "rootfs";
reg = <0x700000 0x700000>;
};
partition@persistent {
label = "persistent";
reg = <0xe00000 0x200000>;
};
partition@full-image {
label = "full-image";
reg = <0x000000 0xE00000>;
};
partition@full-disk {
label = "full-disk";
reg = <0x000000 0x1000000>;
};
};
};
};
axi_timer_0: timer@41c00000 {
clock-frequency = <83250000>;
clocks = <&clk_bus_0>;
compatible = "xlnx,xps-timer-1.00.a";
interrupt-parent = <µblaze_0_axi_intc>;
interrupts = <0 2>;
reg = <0x41c00000 0x10000>;
xlnx,count-width = <0x20>;
xlnx,gen0-assert = <0x1>;
xlnx,gen1-assert = <0x1>;
xlnx,one-timer-only = <0x0>;
xlnx,trig0-assert = <0x1>;
xlnx,trig1-assert = <0x1>;
};
axi_timer_1: pwm@41c10000 {
clock-frequency = <83250000>;
clocks = <&clk_bus_0>;
compatible = "xlnx,xps-timer-1.00.a";
reg = <0x41c10000 0x10000>;
#pwm-cells = <2>;
xlnx,pwm-outputs = <1>;
xlnx,count-width = <0x20>;
xlnx,gen0-assert = <0x1>;
xlnx,gen1-assert = <0x1>;
xlnx,one-timer-only = <0x0>;
xlnx,trig0-assert = <0x1>;
xlnx,trig1-assert = <0x1>;
};
axi_uartlite_0: serial@40600000 {
clock-frequency = <83250000>;
clocks = <&clk_bus_0>;
compatible = "xlnx,xps-uartlite-1.00.a";
current-speed = <115200>;
device_type = "serial";
interrupt-parent = <µblaze_0_axi_intc>;
interrupts = <1 0>;
port-number = <0>;
reg = <0x40600000 0x10000>;
xlnx,baudrate = <0x2580>;
xlnx,data-bits = <0x8>;
xlnx,odd-parity = <0x0>;
xlnx,s-axi-aclk-freq-hz-d = "83.25";
xlnx,use-parity = <0x0>;
};
microblaze_0_axi_intc: interrupt-controller@41200000 {
#interrupt-cells = <2>;
compatible = "xlnx,xps-intc-1.00.a";
interrupt-controller ;
reg = <0x41200000 0x10000>;
xlnx,kind-of-intr = <0xfe>;
xlnx,num-intr-inputs = <0x4>;
};
};
};
/ {
chosen {
bootargs = "console=ttyUL0,9600 root=/dev/mtdblock2 earlyprintk=serial,ttyS0,9600";
linux,stdout-path = &axi_uartlite_0;
stdout-path = &axi_uartlite_0;
};
aliases {
ethernet0 = &axi_ethernetlite_0;
serial0 = &axi_uartlite_0;
spi0 = &axi_quad_spi_0;
flash0 = &axi_flash_spi_0;
};
memory {
device_type = "memory";
reg = <0x80000000 0x0f800000>;
};
};
&axi_ethernetlite_0 {
local-mac-address = [00 0a 35 00 00 00];
};
--
Alvaro G. M.
next reply other threads:[~2018-03-09 12:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-09 12:51 Alvaro G. M. [this message]
2018-03-09 19:05 ` Bug: Microblaze stopped booting after 0fa1c579349fdd90173381712ad78aa99c09d38b Rob Herring
2018-03-10 13:15 ` Michal Simek
2018-03-12 7:52 ` Alvaro G. M.
2018-03-12 10:21 ` Michal Simek
2018-03-14 15:04 ` Michal Simek
2018-03-16 15:18 ` Rob Herring
2018-03-16 18:02 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180309125106.GA1644@salem.gmr.ssr.upm.es \
--to=alvaro.gamez@hazent.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.