* [Qemu-devel] [PATCH v2 1/8] nbd/server: add nbd_opt_invalid helper
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
@ 2018-03-12 15:21 ` Vladimir Sementsov-Ogievskiy
2018-03-13 2:20 ` Eric Blake
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 2/8] nbd/server: add nbd_read_opt_name helper Vladimir Sementsov-Ogievskiy
` (10 subsequent siblings)
11 siblings, 1 reply; 26+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2018-03-12 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-block; +Cc: mreitz, kwolf, pbonzini, eblake, vsementsov, den
NBD_REP_ERR_INVALID is often parameter to nbd_opt_drop and it would
be used more in following patches. So, let's add a helper.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
v2: add Eric's r-b
nbd/server.c | 50 ++++++++++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 14 deletions(-)
diff --git a/nbd/server.c b/nbd/server.c
index 2846ae46c5..d163964cf9 100644
--- a/nbd/server.c
+++ b/nbd/server.c
@@ -218,22 +218,46 @@ nbd_negotiate_send_rep_err(NBDClient *client, uint32_t type,
/* Drop remainder of the current option, and send a reply with the
* given error type and message. Return -errno on read or write
* failure; or 0 if connection is still live. */
-static int GCC_FMT_ATTR(4, 5)
-nbd_opt_drop(NBDClient *client, uint32_t type, Error **errp,
- const char *fmt, ...)
+static int GCC_FMT_ATTR(4, 0)
+nbd_opt_vdrop(NBDClient *client, uint32_t type, Error **errp,
+ const char *fmt, va_list va)
{
int ret = nbd_drop(client->ioc, client->optlen, errp);
- va_list va;
client->optlen = 0;
if (!ret) {
- va_start(va, fmt);
ret = nbd_negotiate_send_rep_verr(client, type, errp, fmt, va);
- va_end(va);
}
return ret;
}
+static int GCC_FMT_ATTR(4, 5)
+nbd_opt_drop(NBDClient *client, uint32_t type, Error **errp,
+ const char *fmt, ...)
+{
+ int ret;
+ va_list va;
+
+ va_start(va, fmt);
+ ret = nbd_opt_vdrop(client, type, errp, fmt, va);
+ va_end(va);
+
+ return ret;
+}
+
+static int GCC_FMT_ATTR(3, 4)
+nbd_opt_invalid(NBDClient *client, Error **errp, const char *fmt, ...)
+{
+ int ret;
+ va_list va;
+
+ va_start(va, fmt);
+ ret = nbd_opt_vdrop(client, NBD_REP_ERR_INVALID, errp, fmt, va);
+ va_end(va);
+
+ return ret;
+}
+
/* Read size bytes from the unparsed payload of the current option.
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success. */
@@ -241,9 +265,9 @@ static int nbd_opt_read(NBDClient *client, void *buffer, size_t size,
Error **errp)
{
if (size > client->optlen) {
- return nbd_opt_drop(client, NBD_REP_ERR_INVALID, errp,
- "Inconsistent lengths in option %s",
- nbd_opt_lookup(client->opt));
+ return nbd_opt_invalid(client, errp,
+ "Inconsistent lengths in option %s",
+ nbd_opt_lookup(client->opt));
}
client->optlen -= size;
return qio_channel_read_all(client->ioc, buffer, size, errp) < 0 ? -EIO : 1;
@@ -398,9 +422,8 @@ static int nbd_reject_length(NBDClient *client, bool fatal, Error **errp)
int ret;
assert(client->optlen);
- ret = nbd_opt_drop(client, NBD_REP_ERR_INVALID, errp,
- "option '%s' has unexpected length",
- nbd_opt_lookup(client->opt));
+ ret = nbd_opt_invalid(client, errp, "option '%s' has unexpected length",
+ nbd_opt_lookup(client->opt));
if (fatal && !ret) {
error_setg(errp, "option '%s' has unexpected length",
nbd_opt_lookup(client->opt));
@@ -438,8 +461,7 @@ static int nbd_negotiate_handle_info(NBDClient *client, uint16_t myflags,
}
be32_to_cpus(&namelen);
if (namelen >= sizeof(name)) {
- return nbd_opt_drop(client, NBD_REP_ERR_INVALID, errp,
- "name too long for qemu");
+ return nbd_opt_invalid(client, errp, "name too long for qemu");
}
rc = nbd_opt_read(client, name, namelen, errp);
if (rc <= 0) {
--
2.11.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 1/8] nbd/server: add nbd_opt_invalid helper
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 1/8] nbd/server: add nbd_opt_invalid helper Vladimir Sementsov-Ogievskiy
@ 2018-03-13 2:20 ` Eric Blake
0 siblings, 0 replies; 26+ messages in thread
From: Eric Blake @ 2018-03-13 2:20 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, qemu-devel, qemu-block
Cc: mreitz, kwolf, pbonzini, den
On 03/12/2018 10:21 AM, Vladimir Sementsov-Ogievskiy wrote:
> NBD_REP_ERR_INVALID is often parameter to nbd_opt_drop and it would
> be used more in following patches. So, let's add a helper.
>
> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
> Reviewed-by: Eric Blake <eblake@redhat.com>
> ---
>
> v2: add Eric's r-b
>
> nbd/server.c | 50 ++++++++++++++++++++++++++++++++++++--------------
> 1 file changed, 36 insertions(+), 14 deletions(-)
I mentioned on v1 that the code is technically correct (and hence you
are correct that I gave R-b which still stands), but it's still a lot of
net lines added, for what really amounts to:
> +static int GCC_FMT_ATTR(4, 5)
> +nbd_opt_drop(NBDClient *client, uint32_t type, Error **errp,
> + const char *fmt, ...)
> +{
> + int ret;
> + va_list va;
> +
> + va_start(va, fmt);
> + ret = nbd_opt_vdrop(client, type, errp, fmt, va);
> + va_end(va);
> +
> + return ret;
> +}
> +
> +static int GCC_FMT_ATTR(3, 4)
> +nbd_opt_invalid(NBDClient *client, Error **errp, const char *fmt, ...)
> +{
> + int ret;
> + va_list va;
> +
> + va_start(va, fmt);
> + ret = nbd_opt_vdrop(client, NBD_REP_ERR_INVALID, errp, fmt, va);
> + va_end(va);
> +
> + return ret;
> +}
two nearly identical functions, that differ by one providing an implicit
argument...
> @@ -241,9 +265,9 @@ static int nbd_opt_read(NBDClient *client, void *buffer, size_t size,
> Error **errp)
> {
> if (size > client->optlen) {
> - return nbd_opt_drop(client, NBD_REP_ERR_INVALID, errp,
> - "Inconsistent lengths in option %s",
> - nbd_opt_lookup(client->opt));
> + return nbd_opt_invalid(client, errp,
> + "Inconsistent lengths in option %s",
> + nbd_opt_lookup(client->opt));
...all so this and four other callers (two in this patch, two more added
in patch 3) can skip typing NBD_REP_ERR_INVALID. But at this point,
it's easier to keep the patch as part of the series.
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH v2 2/8] nbd/server: add nbd_read_opt_name helper
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 1/8] nbd/server: add nbd_opt_invalid helper Vladimir Sementsov-Ogievskiy
@ 2018-03-12 15:21 ` Vladimir Sementsov-Ogievskiy
2018-03-13 2:31 ` Eric Blake
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 3/8] nbd: BLOCK_STATUS for standard get_block_status function: server part Vladimir Sementsov-Ogievskiy
` (9 subsequent siblings)
11 siblings, 1 reply; 26+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2018-03-12 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-block; +Cc: mreitz, kwolf, pbonzini, eblake, vsementsov, den
Add helper to read name in format:
uint32 len (<= NBD_MAX_NAME_SIZE)
len bytes string (not 0-terminated)
The helper would be reused in following patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
v2: splitted and changed a lot helper from larger patch of v1
nbd/server.c | 55 ++++++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 42 insertions(+), 13 deletions(-)
diff --git a/nbd/server.c b/nbd/server.c
index d163964cf9..085e14afbf 100644
--- a/nbd/server.c
+++ b/nbd/server.c
@@ -273,6 +273,47 @@ static int nbd_opt_read(NBDClient *client, void *buffer, size_t size,
return qio_channel_read_all(client->ioc, buffer, size, errp) < 0 ? -EIO : 1;
}
+/* nbd_opt_read_name
+ *
+ * Read string in format:
+ * uint32_t len (<= NBD_MAX_NAME_SIZE)
+ * len bytes string (not 0-terminated)
+ *
+ * @name should be enough to store NBD_MAX_NAME_SIZE+1.
+ * if @length is non-zero, it would be set to read string length.
+ *
+ * Return -errno on I/O error, 0 if option was completely handled by
+ * sending a reply about inconsistent lengths, or 1 on success. */
+static int nbd_opt_read_name(NBDClient *client, char *name, uint32_t *length,
+ Error **errp)
+{
+ int ret;
+ uint32_t len;
+
+ ret = nbd_opt_read(client, &len, sizeof(len), errp);
+ if (ret <= 0) {
+ return ret;
+ }
+ cpu_to_be32s(&len);
+
+ if (len > NBD_MAX_NAME_SIZE) {
+ return nbd_opt_invalid(client, errp,
+ "Invalid name length: %" PRIu32, len);
+ }
+
+ ret = nbd_opt_read(client, name, len, errp);
+ if (ret <= 0) {
+ return ret;
+ }
+ name[len] = '\0';
+
+ if (length) {
+ *length = len;
+ }
+
+ return 1;
+}
+
/* Send a single NBD_REP_SERVER reply to NBD_OPT_LIST, including payload.
* Return -errno on error, 0 on success. */
static int nbd_negotiate_send_rep_list(NBDClient *client, NBDExport *exp,
@@ -455,19 +496,7 @@ static int nbd_negotiate_handle_info(NBDClient *client, uint16_t myflags,
2 bytes: N, number of requests (can be 0)
N * 2 bytes: N requests
*/
- rc = nbd_opt_read(client, &namelen, sizeof(namelen), errp);
- if (rc <= 0) {
- return rc;
- }
- be32_to_cpus(&namelen);
- if (namelen >= sizeof(name)) {
- return nbd_opt_invalid(client, errp, "name too long for qemu");
- }
- rc = nbd_opt_read(client, name, namelen, errp);
- if (rc <= 0) {
- return rc;
- }
- name[namelen] = '\0';
+ rc = nbd_opt_read_name(client, name, &namelen, errp);
trace_nbd_negotiate_handle_export_name_request(name);
rc = nbd_opt_read(client, &requests, sizeof(requests), errp);
--
2.11.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 2/8] nbd/server: add nbd_read_opt_name helper
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 2/8] nbd/server: add nbd_read_opt_name helper Vladimir Sementsov-Ogievskiy
@ 2018-03-13 2:31 ` Eric Blake
0 siblings, 0 replies; 26+ messages in thread
From: Eric Blake @ 2018-03-13 2:31 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, qemu-devel, qemu-block
Cc: mreitz, kwolf, pbonzini, den
On 03/12/2018 10:21 AM, Vladimir Sementsov-Ogievskiy wrote:
> Add helper to read name in format:
>
> uint32 len (<= NBD_MAX_NAME_SIZE)
> len bytes string (not 0-terminated)
>
> The helper would be reused in following patch.
s/would/will/
>
> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
> ---
>
> v2: splitted and changed a lot helper from larger patch of v1
'split' (one of those weird English words whose past and present tense
are spelled the same way; there is no 'splitted')
>
> nbd/server.c | 55 ++++++++++++++++++++++++++++++++++++++++++-------------
> 1 file changed, 42 insertions(+), 13 deletions(-)
>
> diff --git a/nbd/server.c b/nbd/server.c
> index d163964cf9..085e14afbf 100644
> --- a/nbd/server.c
> +++ b/nbd/server.c
> @@ -273,6 +273,47 @@ static int nbd_opt_read(NBDClient *client, void *buffer, size_t size,
> return qio_channel_read_all(client->ioc, buffer, size, errp) < 0 ? -EIO : 1;
> }
>
> +/* nbd_opt_read_name
> + *
> + * Read string in format:
Read a string in the format:
> + * uint32_t len (<= NBD_MAX_NAME_SIZE)
> + * len bytes string (not 0-terminated)
> + *
> + * @name should be enough to store NBD_MAX_NAME_SIZE+1.
> + * if @length is non-zero, it would be set to read string length.
s/if/If/
s/would/will/
s/read/the actual/
> + *
> + * Return -errno on I/O error, 0 if option was completely handled by
> + * sending a reply about inconsistent lengths, or 1 on success. */
> +static int nbd_opt_read_name(NBDClient *client, char *name, uint32_t *length,
> + Error **errp)
> +{
Function looks good.
> @@ -455,19 +496,7 @@ static int nbd_negotiate_handle_info(NBDClient *client, uint16_t myflags,
> 2 bytes: N, number of requests (can be 0)
> N * 2 bytes: N requests
> */
> - rc = nbd_opt_read(client, &namelen, sizeof(namelen), errp);
> - if (rc <= 0) {
> - return rc;
> - }
> - be32_to_cpus(&namelen);
> - if (namelen >= sizeof(name)) {
> - return nbd_opt_invalid(client, errp, "name too long for qemu");
> - }
> - rc = nbd_opt_read(client, name, namelen, errp);
> - if (rc <= 0) {
> - return rc;
> - }
> - name[namelen] = '\0';
> + rc = nbd_opt_read_name(client, name, &namelen, errp);
> trace_nbd_negotiate_handle_export_name_request(name);
>
> rc = nbd_opt_read(client, &requests, sizeof(requests), errp);
Oh, so close. You overwrote rc instead of checking for errors. I'm
squashing in the obvious fix, plus the grammar changes, then adding:
Reviewed-by: Eric Blake <eblake@redhat.com>
diff --git i/nbd/server.c w/nbd/server.c
index 850c6cd2dad..e28526600c4 100644
--- i/nbd/server.c
+++ w/nbd/server.c
@@ -497,6 +497,9 @@ static int nbd_negotiate_handle_info(NBDClient
*client, uint16_t myflags,
N * 2 bytes: N requests
*/
rc = nbd_opt_read_name(client, name, &namelen, errp);
+ if (rc <= 0) {
+ return rc;
+ }
trace_nbd_negotiate_handle_export_name_request(name);
rc = nbd_opt_read(client, &requests, sizeof(requests), errp);
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH v2 3/8] nbd: BLOCK_STATUS for standard get_block_status function: server part
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 1/8] nbd/server: add nbd_opt_invalid helper Vladimir Sementsov-Ogievskiy
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 2/8] nbd/server: add nbd_read_opt_name helper Vladimir Sementsov-Ogievskiy
@ 2018-03-12 15:21 ` Vladimir Sementsov-Ogievskiy
2018-03-13 13:47 ` Eric Blake
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 4/8] block/nbd-client: save first fatal error in nbd_iter_error Vladimir Sementsov-Ogievskiy
` (8 subsequent siblings)
11 siblings, 1 reply; 26+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2018-03-12 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-block; +Cc: mreitz, kwolf, pbonzini, eblake, vsementsov, den
Minimal realization: only one extent in server answer is supported.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
v2: - constants and type defs were splitted out by Eric, except for
NBD_META_ID_BASE_ALLOCATION
- add nbd_opt_skip, to skip meta query remainder, if we are already sure,
that the query selects nothing
- check meta export name in OPT_EXPORT_NAME and OPT_GO
- always set context_id = 0 for NBD_OPT_LIST_META_CONTEXT
- negotiation rewritten to avoid wasting time and memory on reading long,
obviously invalid meta queries
- fixed ERR_INVALID->ERR_UNKNOWN if export not found in nbd_negotiate_meta_queries
- check client->export_meta.valid in "case NBD_CMD_BLOCK_STATUS"
include/block/nbd.h | 2 +
nbd/server.c | 310 ++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 312 insertions(+)
diff --git a/include/block/nbd.h b/include/block/nbd.h
index 2285637e67..9f2be18186 100644
--- a/include/block/nbd.h
+++ b/include/block/nbd.h
@@ -188,6 +188,8 @@ typedef struct NBDExtent {
#define NBD_CMD_FLAG_REQ_ONE (1 << 3) /* only one extent in BLOCK_STATUS
* reply chunk */
+#define NBD_META_ID_BASE_ALLOCATION 0
+
/* Supported request types */
enum {
NBD_CMD_READ = 0,
diff --git a/nbd/server.c b/nbd/server.c
index 085e14afbf..16d7388085 100644
--- a/nbd/server.c
+++ b/nbd/server.c
@@ -82,6 +82,16 @@ struct NBDExport {
static QTAILQ_HEAD(, NBDExport) exports = QTAILQ_HEAD_INITIALIZER(exports);
+/* NBDExportMetaContexts represents a list of contexts to be exported,
+ * as selected by NBD_OPT_SET_META_CONTEXT. Also used for
+ * NBD_OPT_LIST_META_CONTEXT. */
+typedef struct NBDExportMetaContexts {
+ char export_name[NBD_MAX_NAME_SIZE + 1];
+ bool valid; /* means that negotiation of the option finished without
+ errors */
+ bool base_allocation; /* export base:allocation context (block status) */
+} NBDExportMetaContexts;
+
struct NBDClient {
int refcount;
void (*close_fn)(NBDClient *client, bool negotiated);
@@ -102,6 +112,7 @@ struct NBDClient {
bool closing;
bool structured_reply;
+ NBDExportMetaContexts export_meta;
uint32_t opt; /* Current option being negotiated */
uint32_t optlen; /* remaining length of data in ioc for the option being
@@ -273,6 +284,20 @@ static int nbd_opt_read(NBDClient *client, void *buffer, size_t size,
return qio_channel_read_all(client->ioc, buffer, size, errp) < 0 ? -EIO : 1;
}
+/* Drop size bytes from the unparsed payload of the current option.
+ * Return -errno on I/O error, 0 if option was completely handled by
+ * sending a reply about inconsistent lengths, or 1 on success. */
+static int nbd_opt_skip(NBDClient *client, size_t size, Error **errp)
+{
+ if (size > client->optlen) {
+ return nbd_opt_invalid(client, errp,
+ "Inconsistent lengths in option %s",
+ nbd_opt_lookup(client->opt));
+ }
+ client->optlen -= size;
+ return nbd_drop(client->ioc, size, errp) < 0 ? -EIO : 1;
+}
+
/* nbd_opt_read_name
*
* Read string in format:
@@ -371,6 +396,12 @@ static int nbd_negotiate_handle_list(NBDClient *client, Error **errp)
return nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
}
+static void nbd_check_meta_export_name(NBDClient *client)
+{
+ client->export_meta.valid = client->export_meta.valid &&
+ strcmp(client->exp->name, client->export_meta.export_name) == 0;
+}
+
/* Send a reply to NBD_OPT_EXPORT_NAME.
* Return -errno on error, 0 on success. */
static int nbd_negotiate_handle_export_name(NBDClient *client,
@@ -422,6 +453,7 @@ static int nbd_negotiate_handle_export_name(NBDClient *client,
QTAILQ_INSERT_TAIL(&client->exp->clients, client, next);
nbd_export_get(client->exp);
+ nbd_check_meta_export_name(client);
return 0;
}
@@ -612,6 +644,7 @@ static int nbd_negotiate_handle_info(NBDClient *client, uint16_t myflags,
client->exp = exp;
QTAILQ_INSERT_TAIL(&client->exp->clients, client, next);
nbd_export_get(client->exp);
+ nbd_check_meta_export_name(client);
rc = 1;
}
return rc;
@@ -666,6 +699,181 @@ static QIOChannel *nbd_negotiate_handle_starttls(NBDClient *client,
return QIO_CHANNEL(tioc);
}
+/* nbd_negotiate_send_meta_context
+ *
+ * Send one chunk of reply to NBD_OPT_{LIST,SET}_META_CONTEXT
+ *
+ * For NBD_OPT_LIST_META_CONTEXT @context_id is ignored, 0 is used instead.
+ */
+static int nbd_negotiate_send_meta_context(NBDClient *client,
+ const char *context,
+ uint32_t context_id,
+ Error **errp)
+{
+ NBDOptionReplyMetaContext opt;
+ struct iovec iov[] = {
+ {.iov_base = &opt, .iov_len = sizeof(opt)},
+ {.iov_base = (void *)context, .iov_len = strlen(context)}
+ };
+
+ if (client->opt == NBD_OPT_LIST_META_CONTEXT) {
+ context_id = 0;
+ }
+
+ set_be_option_rep(&opt.h, client->opt, NBD_REP_META_CONTEXT,
+ sizeof(opt) - sizeof(opt.h) + iov[1].iov_len);
+ stl_be_p(&opt.context_id, context_id);
+
+ return qio_channel_writev_all(client->ioc, iov, 2, errp) < 0 ? -EIO : 0;
+}
+
+/* nbd_meta_base_query
+ *
+ * Handle query to 'base' namespace. For now, only base:allocation context is
+ * available in it.
+ *
+ * Return -errno on I/O error, 0 if option was completely handled by
+ * sending a reply about inconsistent lengths, or 1 on success. */
+static int nbd_meta_base_query(NBDClient *client, NBDExportMetaContexts *meta,
+ uint32_t len, Error **errp)
+{
+ int ret;
+ char query[sizeof("allocation") - 1];
+ size_t alen = strlen("allocation");
+
+ if (len == 0) {
+ if (client->opt == NBD_OPT_LIST_META_CONTEXT) {
+ meta->base_allocation = true;
+ }
+ return 1;
+ }
+
+ if (len != alen) {
+ return nbd_opt_skip(client, len, errp);
+ }
+
+ ret = nbd_opt_read(client, query, len, errp);
+ if (ret <= 0) {
+ return ret;
+ }
+
+ if (strncmp(query, "allocation", alen) == 0) {
+ meta->base_allocation = true;
+ }
+
+ return 1;
+}
+
+/* nbd_negotiate_meta_query
+ *
+ * Parse namespace name and call corresponding function to parse body of the
+ * query.
+ *
+ * The only supported namespace now is 'base'.
+ *
+ * The function aims not wasting time and memory to read long unknown namespace
+ * names.
+ *
+ * Return -errno on I/O error, 0 if option was completely handled by
+ * sending a reply about inconsistent lengths, or 1 on success. */
+static int nbd_negotiate_meta_query(NBDClient *client,
+ NBDExportMetaContexts *meta, Error **errp)
+{
+ int ret;
+ char query[sizeof("base:") - 1];
+ size_t baselen = strlen("base:");
+ uint32_t len;
+
+ ret = nbd_opt_read(client, &len, sizeof(len), errp);
+ if (ret <= 0) {
+ return ret;
+ }
+ cpu_to_be32s(&len);
+
+ /* The only supported namespace for now is 'base'. So query should start
+ * with 'base:'. Otherwise, we can ignore it and skip the remainder. */
+ if (len < baselen) {
+ return nbd_opt_skip(client, len, errp);
+ }
+
+ len -= baselen;
+ ret = nbd_opt_read(client, query, baselen, errp);
+ if (ret <= 0) {
+ return ret;
+ }
+ if (strncmp(query, "base:", baselen) != 0) {
+ return nbd_opt_skip(client, len, errp);
+ }
+
+ return nbd_meta_base_query(client, meta, len, errp);
+}
+
+/* nbd_negotiate_meta_queries
+ * Handle NBD_OPT_LIST_META_CONTEXT and NBD_OPT_SET_META_CONTEXT
+ *
+ * @meta may be NULL, if caller isn't interested in selected contexts (for
+ * NBD_OPT_LIST_META_CONTEXT)
+ *
+ * Return -errno on I/O error, 0 if option was completely handled by
+ * sending a reply about inconsistent lengths, or 1 on success. */
+static int nbd_negotiate_meta_queries(NBDClient *client,
+ NBDExportMetaContexts *meta, Error **errp)
+{
+ int ret;
+ NBDExport *exp;
+ NBDExportMetaContexts local_meta;
+ uint32_t nb_queries;
+ int i;
+
+ assert(client->structured_reply);
+
+ if (!meta) {
+ meta = &local_meta;
+ }
+
+ memset(meta, 0, sizeof(*meta));
+
+ ret = nbd_opt_read_name(client, meta->export_name, NULL, errp);
+ if (ret <= 0) {
+ return ret;
+ }
+
+ exp = nbd_export_find(meta->export_name);
+ if (exp == NULL) {
+ return nbd_opt_drop(client, NBD_REP_ERR_UNKNOWN, errp,
+ "export '%s' not present", meta->export_name);
+ }
+
+ ret = nbd_opt_read(client, &nb_queries, sizeof(nb_queries), errp);
+ if (ret <= 0) {
+ return ret;
+ }
+ cpu_to_be32s(&nb_queries);
+
+ for (i = 0; i < nb_queries; ++i) {
+ ret = nbd_negotiate_meta_query(client, meta, errp);
+ if (ret <= 0) {
+ return ret;
+ }
+ }
+
+ if (meta->base_allocation) {
+ ret = nbd_negotiate_send_meta_context(client, "base:allocation",
+ NBD_META_ID_BASE_ALLOCATION,
+ errp);
+ if (ret < 0) {
+ return ret;
+ }
+ }
+
+ ret = nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
+ if (ret == 0) {
+ meta->valid = true;
+ }
+
+ return ret;
+}
+
/* nbd_negotiate_options
* Process all NBD_OPT_* client option commands, during fixed newstyle
* negotiation.
@@ -856,6 +1064,22 @@ static int nbd_negotiate_options(NBDClient *client, uint16_t myflags,
}
break;
+ case NBD_OPT_LIST_META_CONTEXT:
+ case NBD_OPT_SET_META_CONTEXT:
+ if (!client->structured_reply) {
+ ret = nbd_opt_invalid(
+ client, errp,
+ "request option '%s' when structured reply "
+ "is not negotiated", nbd_opt_lookup(option));
+ } else if (option == NBD_OPT_LIST_META_CONTEXT) {
+ ret = nbd_negotiate_meta_queries(client, NULL, errp);
+ } else {
+ ret = nbd_negotiate_meta_queries(client,
+ &client->export_meta,
+ errp);
+ }
+ break;
+
default:
ret = nbd_opt_drop(client, NBD_REP_ERR_UNSUP, errp,
"Unsupported option %" PRIu32 " (%s)",
@@ -1485,6 +1709,79 @@ static int coroutine_fn nbd_co_send_sparse_read(NBDClient *client,
return ret;
}
+static int blockstatus_to_extent_be(BlockDriverState *bs, uint64_t offset,
+ uint64_t bytes, NBDExtent *extent)
+{
+ uint64_t remaining_bytes = bytes;
+
+ while (remaining_bytes) {
+ uint32_t flags;
+ int64_t num;
+ int ret = bdrv_block_status_above(bs, NULL, offset, remaining_bytes,
+ &num, NULL, NULL);
+ if (ret < 0) {
+ return ret;
+ }
+
+ flags = (ret & BDRV_BLOCK_ALLOCATED ? 0 : NBD_STATE_HOLE) |
+ (ret & BDRV_BLOCK_ZERO ? NBD_STATE_ZERO : 0);
+
+ if (remaining_bytes == bytes) {
+ extent->flags = flags;
+ }
+
+ if (flags != extent->flags) {
+ break;
+ }
+
+ offset += num;
+ remaining_bytes -= num;
+ }
+
+ cpu_to_be32s(&extent->flags);
+ extent->length = cpu_to_be32(bytes - remaining_bytes);
+
+ return 0;
+}
+
+/* nbd_co_send_extents
+ * @extents should be in big-endian */
+static int nbd_co_send_extents(NBDClient *client, uint64_t handle,
+ NBDExtent *extents, unsigned nb_extents,
+ uint32_t context_id, Error **errp)
+{
+ NBDStructuredMeta chunk;
+
+ struct iovec iov[] = {
+ {.iov_base = &chunk, .iov_len = sizeof(chunk)},
+ {.iov_base = extents, .iov_len = nb_extents * sizeof(extents[0])}
+ };
+
+ set_be_chunk(&chunk.h, NBD_REPLY_FLAG_DONE, NBD_REPLY_TYPE_BLOCK_STATUS,
+ handle, sizeof(chunk) - sizeof(chunk.h) + iov[1].iov_len);
+ stl_be_p(&chunk.context_id, context_id);
+
+ return nbd_co_send_iov(client, iov, 2, errp);
+}
+
+/* Get block status from the exported device and send it to the client */
+static int nbd_co_send_block_status(NBDClient *client, uint64_t handle,
+ BlockDriverState *bs, uint64_t offset,
+ uint64_t length, uint32_t context_id,
+ Error **errp)
+{
+ int ret;
+ NBDExtent extent;
+
+ ret = blockstatus_to_extent_be(bs, offset, length, &extent);
+ if (ret < 0) {
+ return nbd_co_send_structured_error(
+ client, handle, -ret, "can't get block status", errp);
+ }
+
+ return nbd_co_send_extents(client, handle, &extent, 1, context_id, errp);
+}
+
/* nbd_co_receive_request
* Collect a client request. Return 0 if request looks valid, -EIO to drop
* connection right away, and any other negative value to report an error to
@@ -1562,6 +1859,8 @@ static int nbd_co_receive_request(NBDRequestData *req, NBDRequest *request,
valid_flags |= NBD_CMD_FLAG_DF;
} else if (request->type == NBD_CMD_WRITE_ZEROES) {
valid_flags |= NBD_CMD_FLAG_NO_HOLE;
+ } else if (request->type == NBD_CMD_BLOCK_STATUS) {
+ valid_flags |= NBD_CMD_FLAG_REQ_ONE;
}
if (request->flags & ~valid_flags) {
error_setg(errp, "unsupported flags for command %s (got 0x%x)",
@@ -1690,6 +1989,17 @@ static coroutine_fn int nbd_handle_request(NBDClient *client,
return nbd_send_generic_reply(client, request->handle, ret,
"discard failed", errp);
+ case NBD_CMD_BLOCK_STATUS:
+ if (client->export_meta.valid && client->export_meta.base_allocation) {
+ return nbd_co_send_block_status(client, request->handle,
+ blk_bs(exp->blk), request->from,
+ request->len,
+ NBD_META_ID_BASE_ALLOCATION, errp);
+ } else {
+ return nbd_send_generic_reply(client, request->handle, -EINVAL,
+ "CMD_BLOCK_STATUS not negotiated",
+ errp);
+ }
default:
msg = g_strdup_printf("invalid request type (%" PRIu32 ") received",
request->type);
--
2.11.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 3/8] nbd: BLOCK_STATUS for standard get_block_status function: server part
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 3/8] nbd: BLOCK_STATUS for standard get_block_status function: server part Vladimir Sementsov-Ogievskiy
@ 2018-03-13 13:47 ` Eric Blake
2018-03-13 13:56 ` Eric Blake
0 siblings, 1 reply; 26+ messages in thread
From: Eric Blake @ 2018-03-13 13:47 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, qemu-devel, qemu-block
Cc: mreitz, kwolf, pbonzini, den
On 03/12/2018 10:21 AM, Vladimir Sementsov-Ogievskiy wrote:
> Minimal realization: only one extent in server answer is supported.
>
> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
> ---
>
> v2: - constants and type defs were splitted out by Eric, except for
> NBD_META_ID_BASE_ALLOCATION
The constant for NBD_META_ID_BASE_ALLOCATION was intentionally not split
out; it is the only constant that is relevant only to the server side ;)
In fact,...
> - add nbd_opt_skip, to skip meta query remainder, if we are already sure,
> that the query selects nothing
> - check meta export name in OPT_EXPORT_NAME and OPT_GO
> - always set context_id = 0 for NBD_OPT_LIST_META_CONTEXT
> - negotiation rewritten to avoid wasting time and memory on reading long,
> obviously invalid meta queries
> - fixed ERR_INVALID->ERR_UNKNOWN if export not found in nbd_negotiate_meta_queries
> - check client->export_meta.valid in "case NBD_CMD_BLOCK_STATUS"
>
>
> include/block/nbd.h | 2 +
> nbd/server.c | 310 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 312 insertions(+)
>
> diff --git a/include/block/nbd.h b/include/block/nbd.h
> index 2285637e67..9f2be18186 100644
> --- a/include/block/nbd.h
> +++ b/include/block/nbd.h
> @@ -188,6 +188,8 @@ typedef struct NBDExtent {
> #define NBD_CMD_FLAG_REQ_ONE (1 << 3) /* only one extent in BLOCK_STATUS
> * reply chunk */
>
> +#define NBD_META_ID_BASE_ALLOCATION 0
> +
...I will be squashing in a change to move it out of the .h and into the .c.
> /* Supported request types */
> enum {
> NBD_CMD_READ = 0,
> diff --git a/nbd/server.c b/nbd/server.c
> index 085e14afbf..16d7388085 100644
> --- a/nbd/server.c
> @@ -371,6 +396,12 @@ static int nbd_negotiate_handle_list(NBDClient *client, Error **errp)
> return nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
> }
>
> +static void nbd_check_meta_export_name(NBDClient *client)
> +{
> + client->export_meta.valid = client->export_meta.valid &&
> + strcmp(client->exp->name, client->export_meta.export_name) == 0;
The indentation makes this harder for me to parse (at first glance, I
thought you had (a) && (b), and were either missing a side effect or
return statement). It's a lot more obvious what you are doing with:
client->export_meta.valid &= !strcmp(client->exp->name,
client->export_meta.export_name);
> +/* nbd_meta_base_query
> + *
> + * Handle query to 'base' namespace. For now, only base:allocation context is
> + * available in it.
> + *
> + * Return -errno on I/O error, 0 if option was completely handled by
> + * sending a reply about inconsistent lengths, or 1 on success. */
> +static int nbd_meta_base_query(NBDClient *client, NBDExportMetaContexts *meta,
> + uint32_t len, Error **errp)
The comments don't describe what 'len' represents, I had to go read the
call-site before I could understand this function. If I understand
correctly, this function is called at the point that we have parsed
"base:" out of the longer overall name given to LIST or SET, and len is
the remaining length of the overall name that still needs parsing.
> +{
> + int ret;
> + char query[sizeof("allocation") - 1];
Why discard the trailing NUL from the size? It doesn't hurt to leave it
in, unless...
> + size_t alen = strlen("allocation");
...Better than strlen() would be sizeof(query), as long as the trailing
NUL is not changing the size of the array.
> +
> + if (len == 0) {
> + if (client->opt == NBD_OPT_LIST_META_CONTEXT) {
> + meta->base_allocation = true;
> + }
> + return 1;
> + }
Okay, so here, the user requested "base:"; on list we return all
contexts that we know (base:allocation); on set we fall through.
> +
> + if (len != alen) {
> + return nbd_opt_skip(client, len, errp);
> + }
Here, the user requested "base:garbage", where the garbage (including
empty string on set) is a different length than "base:allocation". It
may be a valid string for a future NBD version, but for us, we know
right away it is is not something we recognize, so we gracefully skip it.
Checking myself: if nbd_opt_skip returned -1, we have detected
communication problems with the client; it does not matter if there is
any unparsed data remaining in the current option. It can only return 0
if nbd_opt_invalid has already finished parsing the entire option (we
are ready to parse the next NBD_OPT command, no further queries in the
current option matter). It can only return 1 if we finished parsing the
current query, and are positioned ready to parse the next query. [1]
> +
> + ret = nbd_opt_read(client, query, len, errp);
> + if (ret <= 0) {
> + return ret;
> + }
> +
> + if (strncmp(query, "allocation", alen) == 0) {
Here, you HAD to use strncmp because you didn't leave room for the
trailing NUL in the array above. Tradeoffs. So I guess your approach
is okay.
> + meta->base_allocation = true;
> + }
> +
> + return 1;
And if we get here, the user requested exactly "base:allocation", so we
enabled exactly that context.
> +}
> +
> +/* nbd_negotiate_meta_query
> + *
> + * Parse namespace name and call corresponding function to parse body of the
> + * query.
> + *
> + * The only supported namespace now is 'base'.
> + *
> + * The function aims not wasting time and memory to read long unknown namespace
> + * names.
> + *
> + * Return -errno on I/O error, 0 if option was completely handled by
> + * sending a reply about inconsistent lengths, or 1 on success. */
> +static int nbd_negotiate_meta_query(NBDClient *client,
> + NBDExportMetaContexts *meta, Error **errp)
> +{
> + int ret;
> + char query[sizeof("base:") - 1];
> + size_t baselen = strlen("base:");
And since this matches the approach in the previous function, we'll keep
it consistent.
> + uint32_t len;
> +
> + ret = nbd_opt_read(client, &len, sizeof(len), errp);
> + if (ret <= 0) {
> + return ret;
> + }
> + cpu_to_be32s(&len);
> +
> + /* The only supported namespace for now is 'base'. So query should start
> + * with 'base:'. Otherwise, we can ignore it and skip the remainder. */
> + if (len < baselen) {
> + return nbd_opt_skip(client, len, errp);
> + }
> +
> + len -= baselen;
> + ret = nbd_opt_read(client, query, baselen, errp);
> + if (ret <= 0) {
> + return ret;
> + }
> + if (strncmp(query, "base:", baselen) != 0) {
Again, strncmp is a bit awkward compared to strcmp, but it works.
> + return nbd_opt_skip(client, len, errp);
> + }
> +
> + return nbd_meta_base_query(client, meta, len, errp);
> +}
> +
> +/* nbd_negotiate_meta_queries
> + * Handle NBD_OPT_LIST_META_CONTEXT and NBD_OPT_SET_META_CONTEXT
> + *
> + * @meta may be NULL, if caller isn't interested in selected contexts (for
> + * NBD_OPT_LIST_META_CONTEXT)
> + *
> + * Return -errno on I/O error, 0 if option was completely handled by
> + * sending a reply about inconsistent lengths, or 1 on success. */
Comment is wrong - this function never returns 1 (nor should it, as
nbd_negotiate_options() expects a return of 1 only from NBD_OPT_ABORT).
> +static int nbd_negotiate_meta_queries(NBDClient *client,
> + NBDExportMetaContexts *meta, Error **errp)
> +{
> + int ret;
> + NBDExport *exp;
> + NBDExportMetaContexts local_meta;
> + uint32_t nb_queries;
> + int i;
> +
> + assert(client->structured_reply);
Perhaps worth a comment that this is safe because we already filtered it
out at the caller.
> +
> + if (!meta) {
> + meta = &local_meta;
> + }
> +
> + memset(meta, 0, sizeof(*meta));
> +
> + ret = nbd_opt_read_name(client, meta->export_name, NULL, errp);
> + if (ret <= 0) {
> + return ret;
> + }
> +
> + exp = nbd_export_find(meta->export_name);
> + if (exp == NULL) {
> + return nbd_opt_drop(client, NBD_REP_ERR_UNKNOWN, errp,
> + "export '%s' not present", meta->export_name);
> + }
> +
It's nice to see my review comments from v1 fixed here ;)
> + ret = nbd_opt_read(client, &nb_queries, sizeof(nb_queries), errp);
> + if (ret <= 0) {
> + return ret;
> + }
> + cpu_to_be32s(&nb_queries);
> +
> + for (i = 0; i < nb_queries; ++i) {
> + ret = nbd_negotiate_meta_query(client, meta, errp);
> + if (ret <= 0) {
> + return ret;
[1] Okay, I've convinced myself we are good. We can only early return
from this loop if we encountered a disconnect (result -1, either read or
write to client failed, no further communication is worth trying, so it
doesn't matter if we are left mid-option) or if we encountered an
inconsistent length and already replied successfully to the client about
their bogus request (result 0, we've already skipped to the end of the
current option, ready to parse the next NBD_OPT).
> + }
> + }
Missing: On LIST, if nb_queries is 0 before the loop, then we must reply
with ALL supported contexts, rather than none (the behavior for SET is
correct, though).
> +
> + if (meta->base_allocation) {
> + ret = nbd_negotiate_send_meta_context(client, "base:allocation",
> + NBD_META_ID_BASE_ALLOCATION,
> + errp);
> + if (ret < 0) {
> + return ret;
> + }
> + }
> +
> + ret = nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
> + if (ret == 0) {
> + meta->valid = true;
> + }
> +
> + return ret;
Code is correct - all early returns and this final return are negative
or 0, where 0 means we parsed the entire NBD_OPT, gave a reply, and the
connection is ready for the next NBD_OPT.
> +}
> +
> /* nbd_negotiate_options
> * Process all NBD_OPT_* client option commands, during fixed newstyle
> * negotiation.
> @@ -856,6 +1064,22 @@ static int nbd_negotiate_options(NBDClient *client, uint16_t myflags,
> }
> break;
>
> + case NBD_OPT_LIST_META_CONTEXT:
> + case NBD_OPT_SET_META_CONTEXT:
> + if (!client->structured_reply) {
> + ret = nbd_opt_invalid(
> + client, errp,
> + "request option '%s' when structured reply "
> + "is not negotiated", nbd_opt_lookup(option));
> + } else if (option == NBD_OPT_LIST_META_CONTEXT) {
> + ret = nbd_negotiate_meta_queries(client, NULL, errp);
> + } else {
> + ret = nbd_negotiate_meta_queries(client,
> + &client->export_meta,
> + errp);
> + }
Looks good.
If we WANTED to split this patch into two, then part 1 would be NBD_OPT
handling (were we just always return 0 contexts in reply to LIST or
SET), and part 2 would be NBD_CMD_BLOCK_STATUS handling plus enabling
base:allocation advertisement during NBD_OPT handling. But I'm not
going to ask for a split now.
> + break;
> +
> default:
> ret = nbd_opt_drop(client, NBD_REP_ERR_UNSUP, errp,
> "Unsupported option %" PRIu32 " (%s)",
> @@ -1485,6 +1709,79 @@ static int coroutine_fn nbd_co_send_sparse_read(NBDClient *client,
> return ret;
> }
>
> +static int blockstatus_to_extent_be(BlockDriverState *bs, uint64_t offset,
> + uint64_t bytes, NBDExtent *extent)
> +{
> + uint64_t remaining_bytes = bytes;
> +
> + while (remaining_bytes) {
> + uint32_t flags;
> + int64_t num;
> + int ret = bdrv_block_status_above(bs, NULL, offset, remaining_bytes,
> + &num, NULL, NULL);
> + if (ret < 0) {
> + return ret;
> + }
> +
> + flags = (ret & BDRV_BLOCK_ALLOCATED ? 0 : NBD_STATE_HOLE) |
> + (ret & BDRV_BLOCK_ZERO ? NBD_STATE_ZERO : 0);
I still need to fix what block_status_above returns for protocol drivers
per Kevin's review of my byte-based status patches, but that will be
during soft freeze (as it is in the bug fix category); it may have a
minor impact to this code. But it shouldn't hold up this series.
> @@ -1562,6 +1859,8 @@ static int nbd_co_receive_request(NBDRequestData *req, NBDRequest *request,
> valid_flags |= NBD_CMD_FLAG_DF;
> } else if (request->type == NBD_CMD_WRITE_ZEROES) {
> valid_flags |= NBD_CMD_FLAG_NO_HOLE;
> + } else if (request->type == NBD_CMD_BLOCK_STATUS) {
> + valid_flags |= NBD_CMD_FLAG_REQ_ONE;
> }
> if (request->flags & ~valid_flags) {
> error_setg(errp, "unsupported flags for command %s (got 0x%x)",
> @@ -1690,6 +1989,17 @@ static coroutine_fn int nbd_handle_request(NBDClient *client,
>
> return nbd_send_generic_reply(client, request->handle, ret,
> "discard failed", errp);
> + case NBD_CMD_BLOCK_STATUS:
> + if (client->export_meta.valid && client->export_meta.base_allocation) {
> + return nbd_co_send_block_status(client, request->handle,
> + blk_bs(exp->blk), request->from,
> + request->len,
> + NBD_META_ID_BASE_ALLOCATION, errp);
Will obviously be expanded as we add more namespaces (for dirty bitmap
queries), but works for your first cut of just reporting block status.
> + } else {
> + return nbd_send_generic_reply(client, request->handle, -EINVAL,
> + "CMD_BLOCK_STATUS not negotiated",
> + errp);
> + }
> default:
> msg = g_strdup_printf("invalid request type (%" PRIu32 ") received",
> request->type);
>
I'm making tweaks as mentioned above, but this is close enough to get
into softfreeze.
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 3/8] nbd: BLOCK_STATUS for standard get_block_status function: server part
2018-03-13 13:47 ` Eric Blake
@ 2018-03-13 13:56 ` Eric Blake
0 siblings, 0 replies; 26+ messages in thread
From: Eric Blake @ 2018-03-13 13:56 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, qemu-devel, qemu-block
Cc: kwolf, pbonzini, den, mreitz
On 03/13/2018 08:47 AM, Eric Blake wrote:
> On 03/12/2018 10:21 AM, Vladimir Sementsov-Ogievskiy wrote:
>> Minimal realization: only one extent in server answer is supported.
>>
>> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
>> ---
>>
>> +/* nbd_negotiate_meta_queries
>> + * Handle NBD_OPT_LIST_META_CONTEXT and NBD_OPT_SET_META_CONTEXT
>> + *
>> + * @meta may be NULL, if caller isn't interested in selected contexts
>> (for
>> + * NBD_OPT_LIST_META_CONTEXT)
>> + *
>> + * Return -errno on I/O error, 0 if option was completely handled by
>> + * sending a reply about inconsistent lengths, or 1 on success. */
>
> Comment is wrong - this function never returns 1 (nor should it, as
> nbd_negotiate_options() expects a return of 1 only from NBD_OPT_ABORT).
>
>> +static int nbd_negotiate_meta_queries(NBDClient *client,
>> + NBDExportMetaContexts *meta,
>> Error **errp)
>> +{
>> + int ret;
>> + NBDExport *exp;
>> + NBDExportMetaContexts local_meta;
>> + uint32_t nb_queries;
>> + int i;
>> +
>> + assert(client->structured_reply);
>
> Perhaps worth a comment that this is safe because we already filtered it
> out at the caller.
>
>> +
>> + if (!meta) {
>> + meta = &local_meta;
>> + }
Or, we could check here, and even base our decision on whether to change
'meta' due to client->opt...
>> @@ -856,6 +1064,22 @@ static int nbd_negotiate_options(NBDClient
>> *client, uint16_t myflags,
>> }
>> break;
>> + case NBD_OPT_LIST_META_CONTEXT:
>> + case NBD_OPT_SET_META_CONTEXT:
>> + if (!client->structured_reply) {
>> + ret = nbd_opt_invalid(
>> + client, errp,
>> + "request option '%s' when structured reply "
>> + "is not negotiated",
>> nbd_opt_lookup(option));
>> + } else if (option == NBD_OPT_LIST_META_CONTEXT) {
>> + ret = nbd_negotiate_meta_queries(client, NULL,
>> errp);
>> + } else {
>> + ret = nbd_negotiate_meta_queries(client,
>> +
>> &client->export_meta,
>> + errp);
>> + }
Then here, we just do a single ret = nbd_negotiate_meta_queries().
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH v2 4/8] block/nbd-client: save first fatal error in nbd_iter_error
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
` (2 preceding siblings ...)
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 3/8] nbd: BLOCK_STATUS for standard get_block_status function: server part Vladimir Sementsov-Ogievskiy
@ 2018-03-12 15:21 ` Vladimir Sementsov-Ogievskiy
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 5/8] nbd: BLOCK_STATUS for standard get_block_status function: client part Vladimir Sementsov-Ogievskiy
` (7 subsequent siblings)
11 siblings, 0 replies; 26+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2018-03-12 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-block; +Cc: mreitz, kwolf, pbonzini, eblake, vsementsov, den
It is ok, that fatal error hides previous not fatal, but hiding
first fatal error is a bad feature.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
v2: add Eric's r-b
block/nbd-client.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/block/nbd-client.c b/block/nbd-client.c
index 7b68499b76..0d9f73a137 100644
--- a/block/nbd-client.c
+++ b/block/nbd-client.c
@@ -481,6 +481,7 @@ static coroutine_fn int nbd_co_receive_one_chunk(
typedef struct NBDReplyChunkIter {
int ret;
+ bool fatal;
Error *err;
bool done, only_structured;
} NBDReplyChunkIter;
@@ -490,11 +491,12 @@ static void nbd_iter_error(NBDReplyChunkIter *iter, bool fatal,
{
assert(ret < 0);
- if (fatal || iter->ret == 0) {
+ if ((fatal && !iter->fatal) || iter->ret == 0) {
if (iter->ret != 0) {
error_free(iter->err);
iter->err = NULL;
}
+ iter->fatal = fatal;
iter->ret = ret;
error_propagate(&iter->err, *local_err);
} else {
--
2.11.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [Qemu-devel] [PATCH v2 5/8] nbd: BLOCK_STATUS for standard get_block_status function: client part
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
` (3 preceding siblings ...)
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 4/8] block/nbd-client: save first fatal error in nbd_iter_error Vladimir Sementsov-Ogievskiy
@ 2018-03-12 15:21 ` Vladimir Sementsov-Ogievskiy
2018-03-13 15:38 ` Eric Blake
2018-04-27 12:50 ` Peter Maydell
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 6/8] iotests.py: tiny refactor: move system imports up Vladimir Sementsov-Ogievskiy
` (6 subsequent siblings)
11 siblings, 2 replies; 26+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2018-03-12 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-block; +Cc: mreitz, kwolf, pbonzini, eblake, vsementsov, den
Minimal realization: only one extent in server answer is supported.
Flag NBD_CMD_FLAG_REQ_ONE is used to force this behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
v2: - drop iotests changes, as server is fixed in 03
- rebase to byte-based block status
- use payload_advance32
- check extent->length for zero and for alignment (not sure about
zero, but, we do not send block status with zero-length, so
reply should not be zero-length too)
- handle max_block in nbd_client_co_block_status
- handle zero-length request in nbd_client_co_block_status
- do not use magic numbers in nbd_negotiate_simple_meta_context
? Hm, don't remember, what we decided about DATA/HOLE flags mapping..
block/nbd-client.h | 6 +++
include/block/nbd.h | 3 ++
block/nbd-client.c | 144 ++++++++++++++++++++++++++++++++++++++++++++++++++++
block/nbd.c | 3 ++
nbd/client.c | 117 ++++++++++++++++++++++++++++++++++++++++++
5 files changed, 273 insertions(+)
diff --git a/block/nbd-client.h b/block/nbd-client.h
index 612c4c21a0..0ece76e5af 100644
--- a/block/nbd-client.h
+++ b/block/nbd-client.h
@@ -61,4 +61,10 @@ void nbd_client_detach_aio_context(BlockDriverState *bs);
void nbd_client_attach_aio_context(BlockDriverState *bs,
AioContext *new_context);
+int coroutine_fn nbd_client_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset, int64_t bytes,
+ int64_t *pnum, int64_t *map,
+ BlockDriverState **file);
+
#endif /* NBD_CLIENT_H */
diff --git a/include/block/nbd.h b/include/block/nbd.h
index 9f2be18186..3b34233dd4 100644
--- a/include/block/nbd.h
+++ b/include/block/nbd.h
@@ -262,6 +262,7 @@ struct NBDExportInfo {
/* In-out fields, set by client before nbd_receive_negotiate() and
* updated by server results during nbd_receive_negotiate() */
bool structured_reply;
+ bool base_allocation; /* base:allocation context for NBD_CMD_BLOCK_STATUS */
/* Set by server results during nbd_receive_negotiate() */
uint64_t size;
@@ -269,6 +270,8 @@ struct NBDExportInfo {
uint32_t min_block;
uint32_t opt_block;
uint32_t max_block;
+
+ uint32_t meta_base_allocation_id;
};
typedef struct NBDExportInfo NBDExportInfo;
diff --git a/block/nbd-client.c b/block/nbd-client.c
index 0d9f73a137..b7683707b0 100644
--- a/block/nbd-client.c
+++ b/block/nbd-client.c
@@ -228,6 +228,47 @@ static int nbd_parse_offset_hole_payload(NBDStructuredReplyChunk *chunk,
return 0;
}
+/* nbd_parse_blockstatus_payload
+ * support only one extent in reply and only for
+ * base:allocation context
+ */
+static int nbd_parse_blockstatus_payload(NBDClientSession *client,
+ NBDStructuredReplyChunk *chunk,
+ uint8_t *payload, uint64_t orig_length,
+ NBDExtent *extent, Error **errp)
+{
+ uint32_t context_id;
+
+ if (chunk->length != sizeof(context_id) + sizeof(extent)) {
+ error_setg(errp, "Protocol error: invalid payload for "
+ "NBD_REPLY_TYPE_BLOCK_STATUS");
+ return -EINVAL;
+ }
+
+ context_id = payload_advance32(&payload);
+ if (client->info.meta_base_allocation_id != context_id) {
+ error_setg(errp, "Protocol error: unexpected context id: %d for "
+ "NBD_REPLY_TYPE_BLOCK_STATUS, when negotiated context "
+ "id is %d", context_id,
+ client->info.meta_base_allocation_id);
+ return -EINVAL;
+ }
+
+ extent->length = payload_advance32(&payload);
+ extent->flags = payload_advance32(&payload);
+
+ if (extent->length == 0 ||
+ extent->length % client->info.min_block != 0 ||
+ extent->length > orig_length)
+ {
+ /* TODO: clarify in NBD spec the second requirement about min_block */
+ error_setg(errp, "Protocol error: server sent chunk of invalid length");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/* nbd_parse_error_payload
* on success @errp contains message describing nbd error reply
*/
@@ -642,6 +683,61 @@ static int nbd_co_receive_cmdread_reply(NBDClientSession *s, uint64_t handle,
return iter.ret;
}
+static int nbd_co_receive_blockstatus_reply(NBDClientSession *s,
+ uint64_t handle, uint64_t length,
+ NBDExtent *extent, Error **errp)
+{
+ NBDReplyChunkIter iter;
+ NBDReply reply;
+ void *payload = NULL;
+ Error *local_err = NULL;
+ bool received = false;
+
+ NBD_FOREACH_REPLY_CHUNK(s, iter, handle, s->info.structured_reply,
+ NULL, &reply, &payload)
+ {
+ int ret;
+ NBDStructuredReplyChunk *chunk = &reply.structured;
+
+ assert(nbd_reply_is_structured(&reply));
+
+ switch (chunk->type) {
+ case NBD_REPLY_TYPE_BLOCK_STATUS:
+ if (received) {
+ s->quit = true;
+ error_setg(&local_err, "Several BLOCK_STATUS chunks in reply");
+ nbd_iter_error(&iter, true, -EINVAL, &local_err);
+ }
+ received = true;
+
+ ret = nbd_parse_blockstatus_payload(s, &reply.structured,
+ payload, length, extent,
+ &local_err);
+ if (ret < 0) {
+ s->quit = true;
+ nbd_iter_error(&iter, true, ret, &local_err);
+ }
+ break;
+ default:
+ if (!nbd_reply_type_is_error(chunk->type)) {
+ /* not allowed reply type */
+ s->quit = true;
+ error_setg(&local_err,
+ "Unexpected reply type: %d (%s) "
+ "for CMD_BLOCK_STATUS",
+ chunk->type, nbd_reply_type_lookup(chunk->type));
+ nbd_iter_error(&iter, true, -EINVAL, &local_err);
+ }
+ }
+
+ g_free(payload);
+ payload = NULL;
+ }
+
+ error_propagate(errp, iter.err);
+ return iter.ret;
+}
+
static int nbd_co_request(BlockDriverState *bs, NBDRequest *request,
QEMUIOVector *write_qiov)
{
@@ -784,6 +880,53 @@ int nbd_client_co_pdiscard(BlockDriverState *bs, int64_t offset, int bytes)
return nbd_co_request(bs, &request, NULL);
}
+int coroutine_fn nbd_client_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset, int64_t bytes,
+ int64_t *pnum, int64_t *map,
+ BlockDriverState **file)
+{
+ int64_t ret;
+ NBDExtent extent;
+ NBDClientSession *client = nbd_get_client_session(bs);
+ Error *local_err = NULL;
+
+ NBDRequest request = {
+ .type = NBD_CMD_BLOCK_STATUS,
+ .from = offset,
+ .len = MIN(bytes, MIN_NON_ZERO(INT_MAX, client->info.max_block)),
+ .flags = NBD_CMD_FLAG_REQ_ONE,
+ };
+
+ if (!bytes) {
+ *pnum = 0;
+ return 0;
+ }
+
+ if (!client->info.base_allocation) {
+ *pnum = bytes;
+ return BDRV_BLOCK_DATA;
+ }
+
+ ret = nbd_co_send_request(bs, &request, NULL);
+ if (ret < 0) {
+ return ret;
+ }
+
+ ret = nbd_co_receive_blockstatus_reply(client, request.handle, bytes,
+ &extent, &local_err);
+ if (local_err) {
+ error_report_err(local_err);
+ }
+ if (ret < 0) {
+ return ret;
+ }
+
+ *pnum = extent.length;
+ return (extent.flags & NBD_STATE_HOLE ? 0 : BDRV_BLOCK_DATA) |
+ (extent.flags & NBD_STATE_ZERO ? BDRV_BLOCK_ZERO : 0);
+}
+
void nbd_client_detach_aio_context(BlockDriverState *bs)
{
NBDClientSession *client = nbd_get_client_session(bs);
@@ -828,6 +971,7 @@ int nbd_client_init(BlockDriverState *bs,
client->info.request_sizes = true;
client->info.structured_reply = true;
+ client->info.base_allocation = true;
ret = nbd_receive_negotiate(QIO_CHANNEL(sioc), export,
tlscreds, hostname,
&client->ioc, &client->info, errp);
diff --git a/block/nbd.c b/block/nbd.c
index d4e4172c08..1e2b3ba2d3 100644
--- a/block/nbd.c
+++ b/block/nbd.c
@@ -585,6 +585,7 @@ static BlockDriver bdrv_nbd = {
.bdrv_detach_aio_context = nbd_detach_aio_context,
.bdrv_attach_aio_context = nbd_attach_aio_context,
.bdrv_refresh_filename = nbd_refresh_filename,
+ .bdrv_co_block_status = nbd_client_co_block_status,
};
static BlockDriver bdrv_nbd_tcp = {
@@ -604,6 +605,7 @@ static BlockDriver bdrv_nbd_tcp = {
.bdrv_detach_aio_context = nbd_detach_aio_context,
.bdrv_attach_aio_context = nbd_attach_aio_context,
.bdrv_refresh_filename = nbd_refresh_filename,
+ .bdrv_co_block_status = nbd_client_co_block_status,
};
static BlockDriver bdrv_nbd_unix = {
@@ -623,6 +625,7 @@ static BlockDriver bdrv_nbd_unix = {
.bdrv_detach_aio_context = nbd_detach_aio_context,
.bdrv_attach_aio_context = nbd_attach_aio_context,
.bdrv_refresh_filename = nbd_refresh_filename,
+ .bdrv_co_block_status = nbd_client_co_block_status,
};
static void bdrv_nbd_init(void)
diff --git a/nbd/client.c b/nbd/client.c
index dcad23a053..daf1ae2af5 100644
--- a/nbd/client.c
+++ b/nbd/client.c
@@ -595,6 +595,111 @@ static QIOChannel *nbd_receive_starttls(QIOChannel *ioc,
return QIO_CHANNEL(tioc);
}
+/* nbd_negotiate_simple_meta_context:
+ * Set one meta context. Simple means that reply must contain zero (not
+ * negotiated) or one (negotiated) contexts. More contexts would be considered
+ * as a protocol error. It's also implied, that meta-data query equals queried
+ * context name, so, if server replies with something different then @context,
+ * it considered as error too.
+ * return 1 for successful negotiation, context_id is set
+ * 0 if operation is unsupported,
+ * -errno with errp set for any other error
+ */
+static int nbd_negotiate_simple_meta_context(QIOChannel *ioc,
+ const char *export,
+ const char *context,
+ uint32_t *context_id,
+ Error **errp)
+{
+ int ret;
+ NBDOptionReply reply;
+ uint32_t received_id;
+ bool received;
+ uint32_t export_len = strlen(export);
+ uint32_t context_len = strlen(context);
+ uint32_t data_len = sizeof(export_len) + export_len +
+ sizeof(uint32_t) + /* number of queries */
+ sizeof(context_len) + context_len;
+ char *data = g_malloc(data_len);
+ char *p = data;
+
+ stl_be_p(p, export_len);
+ memcpy(p += sizeof(export_len), export, export_len);
+ stl_be_p(p += export_len, 1);
+ stl_be_p(p += sizeof(uint32_t), context_len);
+ memcpy(p += sizeof(context_len), context, context_len);
+
+ ret = nbd_send_option_request(ioc, NBD_OPT_SET_META_CONTEXT, data_len, data,
+ errp);
+ g_free(data);
+ if (ret < 0) {
+ return ret;
+ }
+
+ if (nbd_receive_option_reply(ioc, NBD_OPT_SET_META_CONTEXT, &reply,
+ errp) < 0)
+ {
+ return -1;
+ }
+
+ ret = nbd_handle_reply_err(ioc, &reply, errp);
+ if (ret <= 0) {
+ return ret;
+ }
+
+ if (reply.type == NBD_REP_META_CONTEXT) {
+ char *name;
+ size_t len;
+
+ if (nbd_read(ioc, &received_id, sizeof(received_id), errp) < 0) {
+ return -EIO;
+ }
+ be32_to_cpus(&received_id);
+
+ len = reply.length - sizeof(received_id);
+ name = g_malloc(len + 1);
+ if (nbd_read(ioc, name, len, errp) < 0) {
+ g_free(name);
+ return -EIO;
+ }
+ name[len] = '\0';
+ if (strcmp(context, name)) {
+ error_setg(errp, "Failed to negotiate meta context '%s', server "
+ "answered with different context '%s'", context,
+ name);
+ g_free(name);
+ return -1;
+ }
+ g_free(name);
+
+ received = true;
+
+ /* receive NBD_REP_ACK */
+ if (nbd_receive_option_reply(ioc, NBD_OPT_SET_META_CONTEXT, &reply,
+ errp) < 0)
+ {
+ return -1;
+ }
+
+ ret = nbd_handle_reply_err(ioc, &reply, errp);
+ if (ret <= 0) {
+ return ret;
+ }
+ }
+
+ if (reply.type != NBD_REP_ACK) {
+ error_setg(errp, "Unexpected reply type %" PRIx32 " expected %x",
+ reply.type, NBD_REP_ACK);
+ return -1;
+ }
+
+ if (received) {
+ *context_id = received_id;
+ return 1;
+ }
+
+ return 0;
+}
int nbd_receive_negotiate(QIOChannel *ioc, const char *name,
QCryptoTLSCreds *tlscreds, const char *hostname,
@@ -606,10 +711,12 @@ int nbd_receive_negotiate(QIOChannel *ioc, const char *name,
int rc;
bool zeroes = true;
bool structured_reply = info->structured_reply;
+ bool base_allocation = info->base_allocation;
trace_nbd_receive_negotiate(tlscreds, hostname ? hostname : "<null>");
info->structured_reply = false;
+ info->base_allocation = false;
rc = -EINVAL;
if (outioc) {
@@ -700,6 +807,16 @@ int nbd_receive_negotiate(QIOChannel *ioc, const char *name,
info->structured_reply = result == 1;
}
+ if (info->structured_reply && base_allocation) {
+ result = nbd_negotiate_simple_meta_context(
+ ioc, name, "base:allocation",
+ &info->meta_base_allocation_id, errp);
+ if (result < 0) {
+ goto fail;
+ }
+ info->base_allocation = result == 1;
+ }
+
/* Try NBD_OPT_GO first - if it works, we are done (it
* also gives us a good message if the server requires
* TLS). If it is not available, fall back to
--
2.11.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 5/8] nbd: BLOCK_STATUS for standard get_block_status function: client part
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 5/8] nbd: BLOCK_STATUS for standard get_block_status function: client part Vladimir Sementsov-Ogievskiy
@ 2018-03-13 15:38 ` Eric Blake
2018-04-27 12:50 ` Peter Maydell
1 sibling, 0 replies; 26+ messages in thread
From: Eric Blake @ 2018-03-13 15:38 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, qemu-devel, qemu-block
Cc: mreitz, kwolf, pbonzini, den
On 03/12/2018 10:21 AM, Vladimir Sementsov-Ogievskiy wrote:
> Minimal realization: only one extent in server answer is supported.
> Flag NBD_CMD_FLAG_REQ_ONE is used to force this behavior.
>
> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
> ---
>
> v2: - drop iotests changes, as server is fixed in 03
> - rebase to byte-based block status
> - use payload_advance32
> - check extent->length for zero and for alignment (not sure about
> zero, but, we do not send block status with zero-length, so
> reply should not be zero-length too)
The NBD spec needs to be clarified that a zero-length request is bogus;
once that is done, then the server can be required to make progress (if
it succeeds, at least one non-zero extent was reported per namespace),
as that is the most useful behavior (if a server replies with 0 extents
or 0-length extents, the client could go into an inf-loop re-requesting
the same status).
> - handle max_block in nbd_client_co_block_status
> - handle zero-length request in nbd_client_co_block_status
> - do not use magic numbers in nbd_negotiate_simple_meta_context
>
> ? Hm, don't remember, what we decided about DATA/HOLE flags mapping..
At this point, it's still up in the air for me to fix the complaints
Kevin had, but those are bug fixes on top of this series (and thus okay
during soft freeze), so your initial implementation is adequate for a
first commit.
> +++ b/block/nbd-client.c
> @@ -228,6 +228,47 @@ static int nbd_parse_offset_hole_payload(NBDStructuredReplyChunk *chunk,
> return 0;
> }
>
> +/* nbd_parse_blockstatus_payload
> + * support only one extent in reply and only for
> + * base:allocation context
> + */
> +static int nbd_parse_blockstatus_payload(NBDClientSession *client,
> + NBDStructuredReplyChunk *chunk,
> + uint8_t *payload, uint64_t orig_length,
> + NBDExtent *extent, Error **errp)
> +{
> + uint32_t context_id;
> +
> + if (chunk->length != sizeof(context_id) + sizeof(extent)) {
> + error_setg(errp, "Protocol error: invalid payload for "
> + "NBD_REPLY_TYPE_BLOCK_STATUS");
> + return -EINVAL;
> + }
> +
> + context_id = payload_advance32(&payload);
> + if (client->info.meta_base_allocation_id != context_id) {
> + error_setg(errp, "Protocol error: unexpected context id: %d for "
s/id:/id/
> + "NBD_REPLY_TYPE_BLOCK_STATUS, when negotiated context "
> + "id is %d", context_id,
> + client->info.meta_base_allocation_id);
> + return -EINVAL;
> + }
> +
> + extent->length = payload_advance32(&payload);
> + extent->flags = payload_advance32(&payload);
> +
> + if (extent->length == 0 ||
> + extent->length % client->info.min_block != 0 ||
> + extent->length > orig_length)
> + {
> + /* TODO: clarify in NBD spec the second requirement about min_block */
Yeah, the spec wording can be tightened, but the intent is obvious: the
server better not be reporting status on anything smaller than what you
can address with read or write. But I think we can address that on the
NBD list without a TODO here.
However, you do have a bug: the server doesn't have to report min_block,
so the value can still be zero (see nbd_refresh_limits, for example) -
and %0 is a bad idea. I'll do the obvious cleanup of checking for a
non-zero min_block.
> + error_setg(errp, "Protocol error: server sent chunk of invalid length");
Maybe insert 'status' in there?
>
> +static int nbd_co_receive_blockstatus_reply(NBDClientSession *s,
> + uint64_t handle, uint64_t length,
> + NBDExtent *extent, Error **errp)
> +{
> + NBDReplyChunkIter iter;
> + NBDReply reply;
> + void *payload = NULL;
> + Error *local_err = NULL;
> + bool received = false;
> +
> + NBD_FOREACH_REPLY_CHUNK(s, iter, handle, s->info.structured_reply,
> + NULL, &reply, &payload)
> + {
> + int ret;
> + NBDStructuredReplyChunk *chunk = &reply.structured;
> +
> + assert(nbd_reply_is_structured(&reply));
> +
> + switch (chunk->type) {
> + case NBD_REPLY_TYPE_BLOCK_STATUS:
> + if (received) {
> + s->quit = true;
> + error_setg(&local_err, "Several BLOCK_STATUS chunks in reply");
Not necessarily an error later on when we request more than one
namespace, but fine for the initial implementation where we really do
expect exactly one status.
> + nbd_iter_error(&iter, true, -EINVAL, &local_err);
> + }
> + received = true;
> +
> + ret = nbd_parse_blockstatus_payload(s, &reply.structured,
> + payload, length, extent,
> + &local_err);
> + if (ret < 0) {
> + s->quit = true;
> + nbd_iter_error(&iter, true, ret, &local_err);
> + }
> + break;
> + default:
> + if (!nbd_reply_type_is_error(chunk->type)) {
> + /* not allowed reply type */
Comment doesn't add much, compared to the error message right below.
> + s->quit = true;
> + error_setg(&local_err,
> + "Unexpected reply type: %d (%s) "
> + "for CMD_BLOCK_STATUS",
> + chunk->type, nbd_reply_type_lookup(chunk->type));
> + nbd_iter_error(&iter, true, -EINVAL, &local_err);
> + }
> + }
> +
> + g_free(payload);
> + payload = NULL;
> + }
> +
> + error_propagate(errp, iter.err);
> + return iter.ret;
> +}
> +
> static int nbd_co_request(BlockDriverState *bs, NBDRequest *request,
> QEMUIOVector *write_qiov)
> {
> @@ -784,6 +880,53 @@ int nbd_client_co_pdiscard(BlockDriverState *bs, int64_t offset, int bytes)
> return nbd_co_request(bs, &request, NULL);
> }
>
> +int coroutine_fn nbd_client_co_block_status(BlockDriverState *bs,
> + bool want_zero,
> + int64_t offset, int64_t bytes,
> + int64_t *pnum, int64_t *map,
> + BlockDriverState **file)
> +{
> + int64_t ret;
> + NBDExtent extent;
> + NBDClientSession *client = nbd_get_client_session(bs);
> + Error *local_err = NULL;
> +
> + NBDRequest request = {
> + .type = NBD_CMD_BLOCK_STATUS,
> + .from = offset,
> + .len = MIN(bytes, MIN_NON_ZERO(INT_MAX, client->info.max_block)),
Hmm. I see why you are capping this to 32 bits; io.c does not cap the
maximum other than to the file size, which can still be larger than 32
bits. If min_block is greater than 1, then .len better be aligned
(INT_MAX isn't). If min_block is non-zero, max_block must already be
set to an integer value that is aligned, and is therefore smaller than
INT_MAX, so we're good there; but if min_block is zero, then we are
acting as though the server has 512-byte alignment (even if the server
supports byte alignment after all), and max_block is also zero, and
we've just requested status for an unaligned amount.
So we have to tweak it slightly; I'm thinking:
.len = MIN(bytes, MIN_NON_ZERO(QEMU_ALIGN_DOWN(INT_MAX,
bs->bl.request_alignment), client->info.max_block))
> + .flags = NBD_CMD_FLAG_REQ_ONE,
> + };
> +
> + if (!bytes) {
> + *pnum = 0;
> + return 0;
> + }
Dead code. io.c guarantees bytes is non-zero on entry.
> +
> + if (!client->info.base_allocation) {
> + *pnum = bytes;
> + return BDRV_BLOCK_DATA;
> + }
Doesn't set *map or *file - but that's part of what I have to clean up
in response to Kevin anyways as a post-series bug fix, so we're okay there.
> +
> + ret = nbd_co_send_request(bs, &request, NULL);
> + if (ret < 0) {
> + return ret;
> + }
> +
> + ret = nbd_co_receive_blockstatus_reply(client, request.handle, bytes,
> + &extent, &local_err);
> + if (local_err) {
> + error_report_err(local_err);
> + }
> + if (ret < 0) {
> + return ret;
> + }
> +
> + *pnum = extent.length;
> + return (extent.flags & NBD_STATE_HOLE ? 0 : BDRV_BLOCK_DATA) |
> + (extent.flags & NBD_STATE_ZERO ? BDRV_BLOCK_ZERO : 0);
> +}
More of the post-series cleanups (I'm not quite sure if !NBD_STATE_HOLE
and BDRV_BLOCK_DATA are synonyms, but it's okay for your first
approximation).
> +
> +++ b/nbd/client.c
> @@ -595,6 +595,111 @@ static QIOChannel *nbd_receive_starttls(QIOChannel *ioc,
> return QIO_CHANNEL(tioc);
> }
>
> +/* nbd_negotiate_simple_meta_context:
> + * Set one meta context. Simple means that reply must contain zero (not
> + * negotiated) or one (negotiated) contexts. More contexts would be considered
> + * as a protocol error. It's also implied, that meta-data query equals queried
s/implied,/implied/
> + * context name, so, if server replies with something different then @context,
> + * it considered as error too.
> + * return 1 for successful negotiation, context_id is set
> + * 0 if operation is unsupported,
> + * -errno with errp set for any other error
> + */
> +static int nbd_negotiate_simple_meta_context(QIOChannel *ioc,
> + const char *export,
> + const char *context,
> + uint32_t *context_id,
> + Error **errp)
> +{
> + int ret;
> + NBDOptionReply reply;
> + uint32_t received_id;
> + bool received;
> + uint32_t export_len = strlen(export);
> + uint32_t context_len = strlen(context);
> + uint32_t data_len = sizeof(export_len) + export_len +
> + sizeof(uint32_t) + /* number of queries */
> + sizeof(context_len) + context_len;
> + char *data = g_malloc(data_len);
> + char *p = data;
> +
> + stl_be_p(p, export_len);
> + memcpy(p += sizeof(export_len), export, export_len);
> + stl_be_p(p += export_len, 1);
> + stl_be_p(p += sizeof(uint32_t), context_len);
> + memcpy(p += sizeof(context_len), context, context_len);
Looks correct.
...
> + if (reply.type == NBD_REP_META_CONTEXT) {
> + char *name;
> + size_t len;
> +
> + if (nbd_read(ioc, &received_id, sizeof(received_id), errp) < 0) {
> + return -EIO;
> + }
> + be32_to_cpus(&received_id);
> +
> + len = reply.length - sizeof(received_id);
> + name = g_malloc(len + 1);
> + if (nbd_read(ioc, name, len, errp) < 0) {
> + g_free(name);
> + return -EIO;
> + }
> + name[len] = '\0';
> + if (strcmp(context, name)) {
> + error_setg(errp, "Failed to negotiate meta context '%s', server "
> + "answered with different context '%s'", context,
> + name);
> + g_free(name);
> + return -1;
Ouch - we're returning -EIO and -1 from the same function. Mixing errno
and -1 is never a good idea; but the caller doesn't care about errno
values, so -1 everywhere is just fine.
> @@ -606,10 +711,12 @@ int nbd_receive_negotiate(QIOChannel *ioc, const char *name,
> int rc;
> bool zeroes = true;
> bool structured_reply = info->structured_reply;
> + bool base_allocation = info->base_allocation;
>
> trace_nbd_receive_negotiate(tlscreds, hostname ? hostname : "<null>");
>
> info->structured_reply = false;
> + info->base_allocation = false;
> rc = -EINVAL;
>
> if (outioc) {
> @@ -700,6 +807,16 @@ int nbd_receive_negotiate(QIOChannel *ioc, const char *name,
> info->structured_reply = result == 1;
> }
>
> + if (info->structured_reply && base_allocation) {
> + result = nbd_negotiate_simple_meta_context(
> + ioc, name, "base:allocation",
> + &info->meta_base_allocation_id, errp);
> + if (result < 0) {
> + goto fail;
> + }
> + info->base_allocation = result == 1;
> + }
I've made fixes, but overall it's good enough for inclusion.
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 5/8] nbd: BLOCK_STATUS for standard get_block_status function: client part
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 5/8] nbd: BLOCK_STATUS for standard get_block_status function: client part Vladimir Sementsov-Ogievskiy
2018-03-13 15:38 ` Eric Blake
@ 2018-04-27 12:50 ` Peter Maydell
2018-04-27 13:22 ` Vladimir Sementsov-Ogievskiy
1 sibling, 1 reply; 26+ messages in thread
From: Peter Maydell @ 2018-04-27 12:50 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy
Cc: QEMU Developers, Qemu-block, Kevin Wolf, Max Reitz,
Denis V. Lunev, Paolo Bonzini
On 12 March 2018 at 15:21, Vladimir Sementsov-Ogievskiy
<vsementsov@virtuozzo.com> wrote:
> Minimal realization: only one extent in server answer is supported.
> Flag NBD_CMD_FLAG_REQ_ONE is used to force this behavior.
Hi; Coverity complains about a possible use of uninitialized
variables in this function (CID 1390607, 1390611):
> +static int nbd_negotiate_simple_meta_context(QIOChannel *ioc,
> + const char *export,
> + const char *context,
> + uint32_t *context_id,
> + Error **errp)
> +{
> + int ret;
> + NBDOptionReply reply;
> + uint32_t received_id;
> + bool received;
We declare received_id and received without initializing them...
> + uint32_t export_len = strlen(export);
> + uint32_t context_len = strlen(context);
> + uint32_t data_len = sizeof(export_len) + export_len +
> + sizeof(uint32_t) + /* number of queries */
> + sizeof(context_len) + context_len;
> + char *data = g_malloc(data_len);
> + char *p = data;
> +
> + stl_be_p(p, export_len);
> + memcpy(p += sizeof(export_len), export, export_len);
> + stl_be_p(p += export_len, 1);
> + stl_be_p(p += sizeof(uint32_t), context_len);
> + memcpy(p += sizeof(context_len), context, context_len);
> +
> + ret = nbd_send_option_request(ioc, NBD_OPT_SET_META_CONTEXT, data_len, data,
> + errp);
> + g_free(data);
> + if (ret < 0) {
> + return ret;
> + }
> +
> + if (nbd_receive_option_reply(ioc, NBD_OPT_SET_META_CONTEXT, &reply,
> + errp) < 0)
> + {
> + return -1;
> + }
> +
> + ret = nbd_handle_reply_err(ioc, &reply, errp);
> + if (ret <= 0) {
> + return ret;
> + }
> +
> + if (reply.type == NBD_REP_META_CONTEXT) {
...and if we don't take this code path we don't ever initialize
received...
> + char *name;
> + size_t len;
> +
> + if (nbd_read(ioc, &received_id, sizeof(received_id), errp) < 0) {
> + return -EIO;
> + }
> + be32_to_cpus(&received_id);
> +
> + len = reply.length - sizeof(received_id);
> + name = g_malloc(len + 1);
> + if (nbd_read(ioc, name, len, errp) < 0) {
> + g_free(name);
> + return -EIO;
> + }
> + name[len] = '\0';
> + if (strcmp(context, name)) {
> + error_setg(errp, "Failed to negotiate meta context '%s', server "
> + "answered with different context '%s'", context,
> + name);
> + g_free(name);
> + return -1;
> + }
> + g_free(name);
> +
> + received = true;
> +
> + /* receive NBD_REP_ACK */
> + if (nbd_receive_option_reply(ioc, NBD_OPT_SET_META_CONTEXT, &reply,
> + errp) < 0)
> + {
> + return -1;
> + }
> +
> + ret = nbd_handle_reply_err(ioc, &reply, errp);
> + if (ret <= 0) {
> + return ret;
> + }
> + }
> +
> + if (reply.type != NBD_REP_ACK) {
> + error_setg(errp, "Unexpected reply type %" PRIx32 " expected %x",
> + reply.type, NBD_REP_ACK);
> + return -1;
> + }
> +
> + if (received) {
> + *context_id = received_id;
...so we might use both received and received_id uninitialized here.
> + return 1;
> + }
> +
> + return 0;
> +}
My guess is that the correct fix is just to initialize received
with "bool received = false;". Coverity should then be able to figure
out that we don't touch received_id unless we initialized it.
thanks
-- PMM
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 5/8] nbd: BLOCK_STATUS for standard get_block_status function: client part
2018-04-27 12:50 ` Peter Maydell
@ 2018-04-27 13:22 ` Vladimir Sementsov-Ogievskiy
0 siblings, 0 replies; 26+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2018-04-27 13:22 UTC (permalink / raw)
To: Peter Maydell
Cc: QEMU Developers, Qemu-block, Kevin Wolf, Max Reitz,
Denis V. Lunev, Paolo Bonzini
27.04.2018 15:50, Peter Maydell wrote:
> On 12 March 2018 at 15:21, Vladimir Sementsov-Ogievskiy
> <vsementsov@virtuozzo.com> wrote:
>> Minimal realization: only one extent in server answer is supported.
>> Flag NBD_CMD_FLAG_REQ_ONE is used to force this behavior.
> Hi; Coverity complains about a possible use of uninitialized
> variables in this function (CID 1390607, 1390611):
>
>> +static int nbd_negotiate_simple_meta_context(QIOChannel *ioc,
>> + const char *export,
>> + const char *context,
>> + uint32_t *context_id,
>> + Error **errp)
>> +{
>> + int ret;
>> + NBDOptionReply reply;
>> + uint32_t received_id;
>> + bool received;
> We declare received_id and received without initializing them...
>
>> + uint32_t export_len = strlen(export);
>> + uint32_t context_len = strlen(context);
>> + uint32_t data_len = sizeof(export_len) + export_len +
>> + sizeof(uint32_t) + /* number of queries */
>> + sizeof(context_len) + context_len;
>> + char *data = g_malloc(data_len);
>> + char *p = data;
>> +
>> + stl_be_p(p, export_len);
>> + memcpy(p += sizeof(export_len), export, export_len);
>> + stl_be_p(p += export_len, 1);
>> + stl_be_p(p += sizeof(uint32_t), context_len);
>> + memcpy(p += sizeof(context_len), context, context_len);
>> +
>> + ret = nbd_send_option_request(ioc, NBD_OPT_SET_META_CONTEXT, data_len, data,
>> + errp);
>> + g_free(data);
>> + if (ret < 0) {
>> + return ret;
>> + }
>> +
>> + if (nbd_receive_option_reply(ioc, NBD_OPT_SET_META_CONTEXT, &reply,
>> + errp) < 0)
>> + {
>> + return -1;
>> + }
>> +
>> + ret = nbd_handle_reply_err(ioc, &reply, errp);
>> + if (ret <= 0) {
>> + return ret;
>> + }
>> +
>> + if (reply.type == NBD_REP_META_CONTEXT) {
> ...and if we don't take this code path we don't ever initialize
> received...
>
>> + char *name;
>> + size_t len;
>> +
>> + if (nbd_read(ioc, &received_id, sizeof(received_id), errp) < 0) {
>> + return -EIO;
>> + }
>> + be32_to_cpus(&received_id);
>> +
>> + len = reply.length - sizeof(received_id);
>> + name = g_malloc(len + 1);
>> + if (nbd_read(ioc, name, len, errp) < 0) {
>> + g_free(name);
>> + return -EIO;
>> + }
>> + name[len] = '\0';
>> + if (strcmp(context, name)) {
>> + error_setg(errp, "Failed to negotiate meta context '%s', server "
>> + "answered with different context '%s'", context,
>> + name);
>> + g_free(name);
>> + return -1;
>> + }
>> + g_free(name);
>> +
>> + received = true;
>> +
>> + /* receive NBD_REP_ACK */
>> + if (nbd_receive_option_reply(ioc, NBD_OPT_SET_META_CONTEXT, &reply,
>> + errp) < 0)
>> + {
>> + return -1;
>> + }
>> +
>> + ret = nbd_handle_reply_err(ioc, &reply, errp);
>> + if (ret <= 0) {
>> + return ret;
>> + }
>> + }
>> +
>> + if (reply.type != NBD_REP_ACK) {
>> + error_setg(errp, "Unexpected reply type %" PRIx32 " expected %x",
>> + reply.type, NBD_REP_ACK);
>> + return -1;
>> + }
>> +
>> + if (received) {
>> + *context_id = received_id;
> ...so we might use both received and received_id uninitialized here.
>
>> + return 1;
>> + }
>> +
>> + return 0;
>> +}
> My guess is that the correct fix is just to initialize received
> with "bool received = false;". Coverity should then be able to figure
> out that we don't touch received_id unless we initialized it.
Yes, looks like a bug. I'll send a patch.
>
> thanks
> -- PMM
--
Best regards,
Vladimir
^ permalink raw reply [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH v2 6/8] iotests.py: tiny refactor: move system imports up
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
` (4 preceding siblings ...)
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 5/8] nbd: BLOCK_STATUS for standard get_block_status function: client part Vladimir Sementsov-Ogievskiy
@ 2018-03-12 15:21 ` Vladimir Sementsov-Ogievskiy
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 7/8] iotests: add file_path helper Vladimir Sementsov-Ogievskiy
` (5 subsequent siblings)
11 siblings, 0 replies; 26+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2018-03-12 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-block; +Cc: mreitz, kwolf, pbonzini, eblake, vsementsov, den
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
v2: add Eric's r-b
tests/qemu-iotests/iotests.py | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tests/qemu-iotests/iotests.py b/tests/qemu-iotests/iotests.py
index 1bcc9ca57d..c1302a2f9b 100644
--- a/tests/qemu-iotests/iotests.py
+++ b/tests/qemu-iotests/iotests.py
@@ -23,13 +23,14 @@ import subprocess
import string
import unittest
import sys
-sys.path.append(os.path.join(os.path.dirname(__file__), '..', '..', 'scripts'))
-import qtest
import struct
import json
import signal
import logging
+sys.path.append(os.path.join(os.path.dirname(__file__), '..', '..', 'scripts'))
+import qtest
+
# This will not work if arguments contain spaces but is necessary if we
# want to support the override options that ./check supports.
--
2.11.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [Qemu-devel] [PATCH v2 7/8] iotests: add file_path helper
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
` (5 preceding siblings ...)
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 6/8] iotests.py: tiny refactor: move system imports up Vladimir Sementsov-Ogievskiy
@ 2018-03-12 15:21 ` Vladimir Sementsov-Ogievskiy
2018-03-13 15:43 ` Eric Blake
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 8/8] iotests: new test 209 for NBD BLOCK_STATUS Vladimir Sementsov-Ogievskiy
` (4 subsequent siblings)
11 siblings, 1 reply; 26+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2018-03-12 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-block; +Cc: mreitz, kwolf, pbonzini, eblake, vsementsov, den
Simple way to have auto generated filenames with auto cleanup. Like
FilePath but without using 'with' statement and without additional
indentation of the whole test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
v2: fix type in commit message
tests/qemu-iotests/iotests.py | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/tests/qemu-iotests/iotests.py b/tests/qemu-iotests/iotests.py
index c1302a2f9b..f2d05ca3fd 100644
--- a/tests/qemu-iotests/iotests.py
+++ b/tests/qemu-iotests/iotests.py
@@ -27,6 +27,7 @@ import struct
import json
import signal
import logging
+import atexit
sys.path.append(os.path.join(os.path.dirname(__file__), '..', '..', 'scripts'))
import qtest
@@ -250,6 +251,37 @@ class FilePath(object):
return False
+def file_path_remover():
+ for path in reversed(file_path_remover.paths):
+ try:
+ os.remove(path)
+ except OSError:
+ pass
+
+
+def file_path(*names):
+ ''' Another way to get auto-generated filename that cleans itself up.
+
+ Use it as simple as:
+
+ img_a, img_b = file_path('a.img', 'b.img')
+ sock = file_path('socket')
+ '''
+
+ if not hasattr(file_path_remover, 'paths'):
+ file_path_remover.paths = []
+ atexit.register(file_path_remover)
+
+ paths = []
+ for name in names:
+ filename = '{0}-{1}'.format(os.getpid(), name)
+ path = os.path.join(test_dir, filename)
+ file_path_remover.paths.append(path)
+ paths.append(path)
+
+ return paths[0] if len(paths) == 1 else paths
+
+
class VM(qtest.QEMUQtestMachine):
'''A QEMU VM'''
--
2.11.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 7/8] iotests: add file_path helper
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 7/8] iotests: add file_path helper Vladimir Sementsov-Ogievskiy
@ 2018-03-13 15:43 ` Eric Blake
0 siblings, 0 replies; 26+ messages in thread
From: Eric Blake @ 2018-03-13 15:43 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, qemu-devel, qemu-block
Cc: mreitz, kwolf, pbonzini, den
On 03/12/2018 10:21 AM, Vladimir Sementsov-Ogievskiy wrote:
> Simple way to have auto generated filenames with auto cleanup. Like
> FilePath but without using 'with' statement and without additional
> indentation of the whole test.
>
> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
> ---
>
> +def file_path(*names):
> + ''' Another way to get auto-generated filename that cleans itself up.
> +
> + Use it as simple as:
s/it/is/
> +
> + img_a, img_b = file_path('a.img', 'b.img')
> + sock = file_path('socket')
> + '''
> +
> + if not hasattr(file_path_remover, 'paths'):
> + file_path_remover.paths = []
> + atexit.register(file_path_remover)
> +
> + paths = []
> + for name in names:
> + filename = '{0}-{1}'.format(os.getpid(), name)
> + path = os.path.join(test_dir, filename)
> + file_path_remover.paths.append(path)
> + paths.append(path)
> +
> + return paths[0] if len(paths) == 1 else paths
> +
> +
> class VM(qtest.QEMUQtestMachine):
> '''A QEMU VM'''
>
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 26+ messages in thread
* [Qemu-devel] [PATCH v2 8/8] iotests: new test 209 for NBD BLOCK_STATUS
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
` (6 preceding siblings ...)
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 7/8] iotests: add file_path helper Vladimir Sementsov-Ogievskiy
@ 2018-03-12 15:21 ` Vladimir Sementsov-Ogievskiy
2018-03-13 15:50 ` Eric Blake
2018-03-12 15:28 ` [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
` (3 subsequent siblings)
11 siblings, 1 reply; 26+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2018-03-12 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-block; +Cc: mreitz, kwolf, pbonzini, eblake, vsementsov, den
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
v2: mv 206 209, make test file executable
tests/qemu-iotests/209 | 34 ++++++++++++++++++++++++++++++++++
tests/qemu-iotests/209.out | 2 ++
tests/qemu-iotests/group | 1 +
3 files changed, 37 insertions(+)
create mode 100755 tests/qemu-iotests/209
create mode 100644 tests/qemu-iotests/209.out
diff --git a/tests/qemu-iotests/209 b/tests/qemu-iotests/209
new file mode 100755
index 0000000000..259e991ec6
--- /dev/null
+++ b/tests/qemu-iotests/209
@@ -0,0 +1,34 @@
+#!/usr/bin/env python
+#
+# Tests for NBD BLOCK_STATUS extension
+#
+# Copyright (c) 2018 Virtuozzo International GmbH
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+import iotests
+from iotests import qemu_img_create, qemu_io, qemu_img_verbose, qemu_nbd, \
+ file_path
+
+iotests.verify_image_format(supported_fmts=['qcow2'])
+
+disk, nbd_sock = file_path('disk', 'nbd-sock')
+nbd_uri = 'nbd+unix:///exp?socket=' + nbd_sock
+
+qemu_img_create('-f', iotests.imgfmt, disk, '1M')
+qemu_io('-f', iotests.imgfmt, '-c', 'write 0 512K', disk)
+
+qemu_nbd('-k', nbd_sock, '-x', 'exp', '-f', iotests.imgfmt, disk)
+qemu_img_verbose('map', '-f', 'raw', '--output=json', nbd_uri)
diff --git a/tests/qemu-iotests/209.out b/tests/qemu-iotests/209.out
new file mode 100644
index 0000000000..0d29724e84
--- /dev/null
+++ b/tests/qemu-iotests/209.out
@@ -0,0 +1,2 @@
+[{ "start": 0, "length": 524288, "depth": 0, "zero": false, "data": true},
+{ "start": 524288, "length": 524288, "depth": 0, "zero": true, "data": false}]
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index a2dfe79d86..c16343016c 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -202,3 +202,4 @@
203 rw auto
204 rw auto quick
205 rw auto quick
+209 rw auto quick
--
2.11.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 8/8] iotests: new test 209 for NBD BLOCK_STATUS
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 8/8] iotests: new test 209 for NBD BLOCK_STATUS Vladimir Sementsov-Ogievskiy
@ 2018-03-13 15:50 ` Eric Blake
0 siblings, 0 replies; 26+ messages in thread
From: Eric Blake @ 2018-03-13 15:50 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, qemu-devel, qemu-block
Cc: mreitz, kwolf, pbonzini, den
On 03/12/2018 10:21 AM, Vladimir Sementsov-Ogievskiy wrote:
> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
> ---
>
> +
> +iotests.verify_image_format(supported_fmts=['qcow2'])
Interesting that './check -nbd' doesn't run 209 (because that defaults
to format -raw, but we need format -qcow2), but './check -nbd' and
'./check -qcow2 -nbd' do run it, so I've tested that it passes, and is
quick.
> +
> +disk, nbd_sock = file_path('disk', 'nbd-sock')
> +nbd_uri = 'nbd+unix:///exp?socket=' + nbd_sock
> +
> +qemu_img_create('-f', iotests.imgfmt, disk, '1M')
> +qemu_io('-f', iotests.imgfmt, '-c', 'write 0 512K', disk)
> +
> +qemu_nbd('-k', nbd_sock, '-x', 'exp', '-f', iotests.imgfmt, disk)
> +qemu_img_verbose('map', '-f', 'raw', '--output=json', nbd_uri)
And this one is easy enough to reproduce, whether I use shell or python.
(Better than some of the python iotests that just have a line of
'.....' where you have to scratch your head at how to reproduce failures).
Reviewed-by: Eric Blake <eblake@redhat.com>
> +++ b/tests/qemu-iotests/group
> @@ -202,3 +202,4 @@
> 203 rw auto
> 204 rw auto quick
> 205 rw auto quick
> +209 rw auto quick
the obvious context conflict as other tests land into master, but I
don't mind that ;)
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
` (7 preceding siblings ...)
2018-03-12 15:21 ` [Qemu-devel] [PATCH v2 8/8] iotests: new test 209 for NBD BLOCK_STATUS Vladimir Sementsov-Ogievskiy
@ 2018-03-12 15:28 ` Vladimir Sementsov-Ogievskiy
2018-03-13 1:58 ` Eric Blake
2018-03-13 2:06 ` no-reply
` (2 subsequent siblings)
11 siblings, 1 reply; 26+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2018-03-12 15:28 UTC (permalink / raw)
To: qemu-devel, qemu-block; +Cc: mreitz, kwolf, pbonzini, eblake, den
12.03.2018 18:21, Vladimir Sementsov-Ogievskiy wrote:
> Hi all.
>
> Here is minimal realization of base:allocation context of NBD
> block-status extension, which allows to get block status through
> NBD.
>
> v2 changes are in each patch after "---" line.
Forget to mention the main thing:
It is based on:
[PATCH 0/5] nbd server fixing and refactoring before BLOCK_STATUS
nbd/server: move nbd_co_send_structured_error up
nbd/server: fix sparse read
nbd/server: fix: check client->closing before reply sending
nbd/server: refactor nbd_trip: cmd_read and generic reply
nbd/server: refactor nbd_trip: split out nbd_handle_request
>
> Vladimir Sementsov-Ogievskiy (8):
> nbd/server: add nbd_opt_invalid helper
> nbd/server: add nbd_read_opt_name helper
> nbd: BLOCK_STATUS for standard get_block_status function: server part
> block/nbd-client: save first fatal error in nbd_iter_error
> nbd: BLOCK_STATUS for standard get_block_status function: client part
> iotests.py: tiny refactor: move system imports up
> iotests: add file_path helper
> iotests: new test 209 for NBD BLOCK_STATUS
>
> block/nbd-client.h | 6 +
> include/block/nbd.h | 5 +
> block/nbd-client.c | 148 ++++++++++++++-
> block/nbd.c | 3 +
> nbd/client.c | 117 ++++++++++++
> nbd/server.c | 413 +++++++++++++++++++++++++++++++++++++++---
> tests/qemu-iotests/209 | 34 ++++
> tests/qemu-iotests/209.out | 2 +
> tests/qemu-iotests/group | 1 +
> tests/qemu-iotests/iotests.py | 37 +++-
> 10 files changed, 737 insertions(+), 29 deletions(-)
> create mode 100755 tests/qemu-iotests/209
> create mode 100644 tests/qemu-iotests/209.out
>
--
Best regards,
Vladimir
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation
2018-03-12 15:28 ` [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
@ 2018-03-13 1:58 ` Eric Blake
0 siblings, 0 replies; 26+ messages in thread
From: Eric Blake @ 2018-03-13 1:58 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, qemu-devel, qemu-block
Cc: mreitz, kwolf, pbonzini, den
On 03/12/2018 10:28 AM, Vladimir Sementsov-Ogievskiy wrote:
> 12.03.2018 18:21, Vladimir Sementsov-Ogievskiy wrote:
>> Hi all.
>>
>> Here is minimal realization of base:allocation context of NBD
>> block-status extension, which allows to get block status through
>> NBD.
>>
>> v2 changes are in each patch after "---" line.
>
> Forget to mention the main thing:
>
> It is based on:
>
> [PATCH 0/5] nbd server fixing and refactoring before BLOCK_STATUS
Let's spell that in a manner patchew can recognize:
Based-on: <20180308184636.178534-1-vsementsov@virtuozzo.com>
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
` (8 preceding siblings ...)
2018-03-12 15:28 ` [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
@ 2018-03-13 2:06 ` no-reply
2018-03-13 3:11 ` Eric Blake
2018-03-13 7:55 ` no-reply
2018-03-13 15:55 ` Eric Blake
11 siblings, 1 reply; 26+ messages in thread
From: no-reply @ 2018-03-13 2:06 UTC (permalink / raw)
To: vsementsov; +Cc: famz, qemu-devel, qemu-block, kwolf, mreitz, den, pbonzini
Hi,
This series failed build test on s390x host. Please find the details below.
Type: series
Message-id: 20180312152126.286890-1-vsementsov@virtuozzo.com
Subject: [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation
=== TEST SCRIPT BEGIN ===
#!/bin/bash
# Testing script will be invoked under the git checkout with
# HEAD pointing to a commit that has the patches applied on top of "base"
# branch
set -e
echo "=== ENV ==="
env
echo "=== PACKAGES ==="
rpm -qa
echo "=== TEST BEGIN ==="
CC=$HOME/bin/cc
INSTALL=$PWD/install
BUILD=$PWD/build
echo -n "Using CC: "
realpath $CC
mkdir -p $BUILD $INSTALL
SRC=$PWD
cd $BUILD
$SRC/configure --cc=$CC --prefix=$INSTALL
make -j4
# XXX: we need reliable clean up
# make check -j4 V=1
make install
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/20180312152126.286890-1-vsementsov@virtuozzo.com -> patchew/20180312152126.286890-1-vsementsov@virtuozzo.com
Switched to a new branch 'test'
4cff1a17d2 iotests: new test 209 for NBD BLOCK_STATUS
a1ce527abd iotests: add file_path helper
a3e6cf1399 iotests.py: tiny refactor: move system imports up
8b48bcb22d nbd: BLOCK_STATUS for standard get_block_status function: client part
07ce0b40a5 block/nbd-client: save first fatal error in nbd_iter_error
5c821fb73c nbd: BLOCK_STATUS for standard get_block_status function: server part
bf6b85e661 nbd/server: add nbd_read_opt_name helper
1eb20d03a6 nbd/server: add nbd_opt_invalid helper
=== OUTPUT BEGIN ===
=== ENV ===
LANG=en_US.UTF-8
XDG_SESSION_ID=91010
USER=fam
PWD=/var/tmp/patchew-tester-tmp-erqpie2w/src
HOME=/home/fam
SHELL=/bin/sh
SHLVL=2
PATCHEW=/home/fam/patchew/patchew-cli -s http://patchew.org --nodebug
LOGNAME=fam
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1012/bus
XDG_RUNTIME_DIR=/run/user/1012
PATH=/usr/bin:/bin
_=/usr/bin/env
=== PACKAGES ===
gpg-pubkey-873529b8-54e386ff
glibc-debuginfo-common-2.24-10.fc25.s390x
fedora-release-26-1.noarch
dejavu-sans-mono-fonts-2.35-4.fc26.noarch
xemacs-filesystem-21.5.34-22.20170124hgf412e9f093d4.fc26.noarch
bash-4.4.12-7.fc26.s390x
freetype-2.7.1-9.fc26.s390x
libSM-1.2.2-5.fc26.s390x
libmpc-1.0.2-6.fc26.s390x
libaio-0.3.110-7.fc26.s390x
libverto-0.2.6-7.fc26.s390x
perl-Scalar-List-Utils-1.48-1.fc26.s390x
iptables-libs-1.6.1-2.fc26.s390x
p11-kit-trust-0.23.9-2.fc26.s390x
tcl-8.6.6-2.fc26.s390x
libxshmfence-1.2-4.fc26.s390x
expect-5.45-23.fc26.s390x
perl-Thread-Queue-3.12-1.fc26.noarch
perl-encoding-2.19-6.fc26.s390x
keyutils-1.5.10-1.fc26.s390x
gmp-devel-6.1.2-4.fc26.s390x
enchant-1.6.0-16.fc26.s390x
net-snmp-libs-5.7.3-17.fc26.s390x
python-gobject-base-3.24.1-1.fc26.s390x
python3-enchant-1.6.10-1.fc26.noarch
python-lockfile-0.11.0-6.fc26.noarch
python2-pyparsing-2.1.10-3.fc26.noarch
python2-lxml-4.1.1-1.fc26.s390x
librados2-10.2.7-2.fc26.s390x
trousers-lib-0.3.13-7.fc26.s390x
libpaper-1.1.24-14.fc26.s390x
libdatrie-0.2.9-4.fc26.s390x
libsoup-2.58.2-1.fc26.s390x
passwd-0.79-9.fc26.s390x
bind99-libs-9.9.10-3.P3.fc26.s390x
python3-rpm-4.13.0.2-1.fc26.s390x
systemd-233-7.fc26.s390x
virglrenderer-0.6.0-1.20170210git76b3da97b.fc26.s390x
s390utils-ziomon-1.36.1-3.fc26.s390x
s390utils-osasnmpd-1.36.1-3.fc26.s390x
libXrandr-1.5.1-2.fc26.s390x
libglvnd-glx-1.0.0-1.fc26.s390x
texlive-ifxetex-svn19685.0.5-33.fc26.2.noarch
texlive-psnfss-svn33946.9.2a-33.fc26.2.noarch
texlive-dvipdfmx-def-svn40328-33.fc26.2.noarch
texlive-natbib-svn20668.8.31b-33.fc26.2.noarch
texlive-xdvi-bin-svn40750-33.20160520.fc26.2.s390x
texlive-cm-svn32865.0-33.fc26.2.noarch
texlive-beton-svn15878.0-33.fc26.2.noarch
texlive-fpl-svn15878.1.002-33.fc26.2.noarch
texlive-mflogo-svn38628-33.fc26.2.noarch
texlive-texlive-docindex-svn41430-33.fc26.2.noarch
texlive-luaotfload-bin-svn34647.0-33.20160520.fc26.2.noarch
texlive-koma-script-svn41508-33.fc26.2.noarch
texlive-pst-tree-svn24142.1.12-33.fc26.2.noarch
texlive-breqn-svn38099.0.98d-33.fc26.2.noarch
texlive-xetex-svn41438-33.fc26.2.noarch
gstreamer1-plugins-bad-free-1.12.3-1.fc26.s390x
xorg-x11-font-utils-7.5-33.fc26.s390x
ghostscript-fonts-5.50-36.fc26.noarch
libXext-devel-1.3.3-5.fc26.s390x
libusbx-devel-1.0.21-2.fc26.s390x
libglvnd-devel-1.0.0-1.fc26.s390x
emacs-25.3-3.fc26.s390x
alsa-lib-devel-1.1.4.1-1.fc26.s390x
kbd-2.0.4-2.fc26.s390x
dconf-0.26.0-2.fc26.s390x
ccache-3.3.4-1.fc26.s390x
mc-4.8.19-5.fc26.s390x
doxygen-1.8.13-9.fc26.s390x
dpkg-1.18.24-1.fc26.s390x
libtdb-1.3.13-1.fc26.s390x
python2-pynacl-1.1.1-1.fc26.s390x
nss-sysinit-3.34.0-1.0.fc26.s390x
kernel-4.13.16-202.fc26.s390x
perl-Filter-1.58-1.fc26.s390x
python2-pip-9.0.1-11.fc26.noarch
dnf-2.7.5-2.fc26.noarch
sssd-common-1.16.0-4.fc26.s390x
python2-sssdconfig-1.16.0-4.fc26.noarch
bind-license-9.11.2-1.P1.fc26.noarch
libtasn1-4.13-1.fc26.s390x
glusterfs-fuse-3.10.10-1.fc26.s390x
cpp-7.3.1-2.fc26.s390x
pkgconf-1.3.12-2.fc26.s390x
python2-fedora-0.10.0-1.fc26.noarch
cmake-filesystem-3.10.1-11.fc26.s390x
selinux-policy-targeted-3.13.1-260.18.fc26.noarch
python3-requests-kerberos-0.12.0-1.fc26.noarch
libmicrohttpd-0.9.59-1.fc26.s390x
GeoIP-GeoLite-data-2018.01-1.fc26.noarch
glibc-debuginfo-2.24-10.fc25.s390x
dejavu-fonts-common-2.35-4.fc26.noarch
bind99-license-9.9.10-3.P3.fc26.noarch
ncurses-libs-6.0-8.20170212.fc26.s390x
libpng-1.6.28-2.fc26.s390x
libICE-1.0.9-9.fc26.s390x
perl-Text-ParseWords-3.30-366.fc26.noarch
libtool-ltdl-2.4.6-17.fc26.s390x
libselinux-utils-2.6-7.fc26.s390x
userspace-rcu-0.9.3-2.fc26.s390x
libXfont-1.5.2-5.fc26.s390x
perl-Class-Inspector-1.31-3.fc26.noarch
perl-open-1.10-395.fc26.noarch
keyutils-libs-devel-1.5.10-1.fc26.s390x
isl-0.16.1-1.fc26.s390x
libsecret-0.18.5-3.fc26.s390x
compat-openssl10-1.0.2m-1.fc26.s390x
python3-iniparse-0.4-24.fc26.noarch
python3-dateutil-2.6.0-3.fc26.noarch
python3-firewall-0.4.4.5-1.fc26.noarch
python-enum34-1.1.6-1.fc26.noarch
python2-pygments-2.2.0-7.fc26.noarch
python2-dockerfile-parse-0.0.7-1.fc26.noarch
perl-Net-SSLeay-1.81-1.fc26.s390x
hostname-3.18-2.fc26.s390x
libtirpc-1.0.2-0.fc26.s390x
rpm-build-libs-4.13.0.2-1.fc26.s390x
libutempter-1.1.6-9.fc26.s390x
systemd-pam-233-7.fc26.s390x
libXinerama-1.1.3-7.fc26.s390x
mesa-libGL-17.2.4-2.fc26.s390x
texlive-amsfonts-svn29208.3.04-33.fc26.2.noarch
texlive-caption-svn41409-33.fc26.2.noarch
texlive-enumitem-svn24146.3.5.2-33.fc26.2.noarch
texlive-pdftex-def-svn22653.0.06d-33.fc26.2.noarch
texlive-xdvi-svn40768-33.fc26.2.noarch
texlive-courier-svn35058.0-33.fc26.2.noarch
texlive-charter-svn15878.0-33.fc26.2.noarch
texlive-graphics-def-svn41879-33.fc26.2.noarch
texlive-mfnfss-svn19410.0-33.fc26.2.noarch
texlive-texlive-en-svn41185-33.fc26.2.noarch
texlive-ifplatform-svn21156.0.4-33.fc26.2.noarch
texlive-ms-svn29849.0-33.fc26.2.noarch
texlive-pst-tools-svn34067.0.05-33.fc26.2.noarch
texlive-powerdot-svn38984-33.fc26.2.noarch
texlive-xetexconfig-svn41133-33.fc26.2.noarch
libvdpau-1.1.1-4.fc26.s390x
zlib-devel-1.2.11-2.fc26.s390x
gdk-pixbuf2-devel-2.36.9-1.fc26.s390x
libX11-devel-1.6.5-2.fc26.s390x
libglvnd-core-devel-1.0.0-1.fc26.s390x
SDL2-devel-2.0.7-2.fc26.s390x
webkitgtk3-2.4.11-5.fc26.s390x
grubby-8.40-4.fc26.s390x
uboot-tools-2017.05-4.fc26.s390x
cracklib-dicts-2.9.6-5.fc26.s390x
texinfo-6.3-3.fc26.s390x
time-1.7-52.fc26.s390x
python2-deltarpm-3.6-19.fc26.s390x
nss-3.34.0-1.0.fc26.s390x
python2-setuptools-37.0.0-1.fc26.noarch
python2-dnf-2.7.5-2.fc26.noarch
groff-base-1.22.3-10.fc26.s390x
python2-devel-2.7.14-4.fc26.s390x
python2-GitPython-2.1.7-2.fc26.noarch
boost-iostreams-1.63.0-10.fc26.s390x
distribution-gpg-keys-1.18-1.fc26.noarch
glusterfs-client-xlators-3.10.10-1.fc26.s390x
cups-libs-2.2.2-8.fc26.s390x
bind-libs-lite-9.11.2-1.P1.fc26.s390x
libpkgconf-1.3.12-2.fc26.s390x
python2-rpkg-1.51-3.fc26.noarch
java-1.8.0-openjdk-headless-1.8.0.161-5.b14.fc26.s390x
fedpkg-1.31-5.fc26.noarch
python3-dnf-plugin-system-upgrade-2.0.5-1.fc26.noarch
dtc-1.4.6-1.fc26.s390x
fedora-repos-26-2.noarch
gpg-pubkey-efe550f5-5220ba41
gpg-pubkey-81b46521-55b3ca9a
filesystem-3.2-40.fc26.s390x
basesystem-11-3.fc26.noarch
js-jquery-3.2.1-1.fc26.noarch
elfutils-libelf-0.169-1.fc26.s390x
libidn-1.33-2.fc26.s390x
libogg-1.3.2-6.fc26.s390x
slang-2.3.1a-2.fc26.s390x
apr-1.6.3-1.fc26.s390x
libxkbcommon-0.7.1-3.fc26.s390x
perl-IO-1.36-395.fc26.s390x
libvorbis-1.3.5-2.fc26.s390x
less-487-3.fc26.s390x
lttng-ust-2.9.0-2.fc26.s390x
OpenEXR-libs-2.2.0-6.fc26.s390x
ipset-libs-6.29-3.fc26.s390x
perl-XML-XPath-1.42-1.fc26.noarch
lua-filesystem-1.6.3-3.fc24.s390x
sqlite-3.20.1-1.fc26.s390x
gstreamer1-1.12.3-1.fc26.s390x
libpwquality-1.3.0-8.fc26.s390x
gettext-libs-0.19.8.1-9.fc26.s390x
python3-chardet-2.3.0-3.fc26.noarch
python3-slip-dbus-0.6.4-6.fc26.noarch
python-chardet-2.3.0-3.fc26.noarch
python2-pyasn1-0.2.3-1.fc26.noarch
python-slip-dbus-0.6.4-6.fc26.noarch
libarchive-3.2.2-4.fc26.s390x
libbabeltrace-1.5.2-2.fc26.s390x
cdparanoia-libs-10.2-22.fc26.s390x
krb5-workstation-1.15.2-4.fc26.s390x
gpgme-1.8.0-12.fc26.s390x
python2-gpg-1.8.0-12.fc26.s390x
shadow-utils-4.3.1-3.fc26.s390x
cryptsetup-libs-1.7.5-1.fc26.s390x
kpartx-0.4.9-88.fc26.s390x
net-snmp-agent-libs-5.7.3-17.fc26.s390x
libXi-1.7.9-2.fc26.s390x
texlive-tetex-svn41059-33.fc26.2.noarch
texlive-tools-svn40934-33.fc26.2.noarch
texlive-bibtex-bin-svn40473-33.20160520.fc26.2.s390x
texlive-mfware-bin-svn40473-33.20160520.fc26.2.s390x
texlive-underscore-svn18261.0-33.fc26.2.noarch
texlive-avantgar-svn31835.0-33.fc26.2.noarch
texlive-anysize-svn15878.0-33.fc26.2.noarch
texlive-lineno-svn21442.4.41-33.fc26.2.noarch
texlive-mathpazo-svn15878.1.003-33.fc26.2.noarch
texlive-soul-svn15878.2.4-33.fc26.2.noarch
texlive-luatexbase-svn38550-33.fc26.2.noarch
texlive-listings-svn37534.1.6-33.fc26.2.noarch
texlive-pstricks-svn41321-33.fc26.2.noarch
texlive-metalogo-svn18611.0.12-33.fc26.2.noarch
texlive-dvipdfmx-svn41149-33.fc26.2.noarch
kbd-legacy-2.0.4-2.fc26.noarch
nspr-devel-4.17.0-1.fc26.s390x
ghostscript-x11-9.20-10.fc26.s390x
libXrender-devel-0.9.10-2.fc26.s390x
libxkbcommon-devel-0.7.1-3.fc26.s390x
mesa-libGL-devel-17.2.4-2.fc26.s390x
sqlite-devel-3.20.1-1.fc26.s390x
usbredir-devel-0.7.1-3.fc26.s390x
libcap-devel-2.25-5.fc26.s390x
brlapi-devel-0.6.6-5.fc26.s390x
python3-pygpgme-0.3-22.fc26.s390x
pinentry-0.9.7-3.fc26.s390x
perl-Test-Harness-3.39-1.fc26.noarch
qemu-sanity-check-nodeps-1.1.5-6.fc26.s390x
libldb-1.1.29-5.fc26.s390x
nss-util-devel-3.34.0-1.0.fc26.s390x
python2-2.7.14-4.fc26.s390x
libwayland-cursor-1.13.0-3.fc26.s390x
pulseaudio-libs-devel-11.1-7.fc26.s390x
json-c-0.12.1-5.fc26.s390x
kernel-headers-4.15.4-200.fc26.s390x
libgcrypt-1.8.2-1.fc26.s390x
libgo-devel-7.3.1-2.fc26.s390x
glusterfs-cli-3.10.10-1.fc26.s390x
glusterfs-server-3.10.10-1.fc26.s390x
redhat-rpm-config-64-1.fc26.noarch
ca-certificates-2018.2.22-1.0.fc26.noarch
python2-sphinx-1.5.6-1.fc26.noarch
libtevent-0.9.35-1.fc26.s390x
dnsmasq-2.76-6.fc26.s390x
perl-Module-CoreList-5.20180120-1.fc26.noarch
gpg-pubkey-34ec9cba-54e38751
gpg-pubkey-030d5aed-55b577f0
setup-2.10.5-2.fc26.noarch
lato-fonts-2.015-3.fc26.noarch
web-assets-filesystem-5-5.fc26.noarch
libsepol-2.6-2.fc26.s390x
libcap-2.25-5.fc26.s390x
tcp_wrappers-libs-7.6-85.fc26.s390x
libnl3-3.3.0-1.fc26.s390x
pixman-0.34.0-3.fc26.s390x
lzo-2.08-9.fc26.s390x
perl-5.24.3-395.fc26.s390x
libnl3-cli-3.3.0-1.fc26.s390x
gpm-libs-1.20.7-10.fc26.s390x
iso-codes-3.74-2.fc26.noarch
ipset-6.29-3.fc26.s390x
lua-term-0.07-1.fc25.s390x
libdb-utils-5.3.28-24.fc26.s390x
dbus-glib-0.108-2.fc26.s390x
pam-1.3.0-2.fc26.s390x
avahi-glib-0.6.32-7.fc26.s390x
python2-dateutil-2.6.0-3.fc26.noarch
python3-asn1crypto-0.23.0-1.fc26.noarch
python3-slip-0.6.4-6.fc26.noarch
python-backports-ssl_match_hostname-3.5.0.1-4.fc26.noarch
python2-pyOpenSSL-16.2.0-6.fc26.noarch
python-slip-0.6.4-6.fc26.noarch
nss-pem-1.0.3-3.fc26.s390x
fipscheck-1.5.0-1.fc26.s390x
elfutils-0.169-1.fc26.s390x
cyrus-sasl-lib-2.1.26-32.fc26.s390x
libkadm5-1.15.2-4.fc26.s390x
python3-kerberos-1.2.5-3.fc26.s390x
rpmconf-1.0.19-1.fc26.noarch
libsemanage-2.6-4.fc26.s390x
device-mapper-libs-1.02.137-6.fc26.s390x
yum-3.4.3-512.fc26.noarch
device-mapper-multipath-0.4.9-88.fc26.s390x
net-snmp-5.7.3-17.fc26.s390x
libXtst-1.2.3-2.fc26.s390x
libXxf86vm-1.1.4-4.fc26.s390x
texlive-amsmath-svn41561-33.fc26.2.noarch
texlive-xkeyval-svn35741.2.7a-33.fc26.2.noarch
texlive-bibtex-svn40768-33.fc26.2.noarch
texlive-mfware-svn40768-33.fc26.2.noarch
texlive-wasy-svn35831.0-33.fc26.2.noarch
texlive-bookman-svn31835.0-33.fc26.2.noarch
texlive-babel-english-svn30264.3.3p-33.fc26.2.noarch
texlive-fix2col-svn38770-33.fc26.2.noarch
texlive-mdwtools-svn15878.1.05.4-33.fc26.2.noarch
texlive-tex-gyre-math-svn41264-33.fc26.2.noarch
texlive-luaotfload-svn40902-33.fc26.2.noarch
texlive-showexpl-svn32737.v0.3l-33.fc26.2.noarch
texlive-pstricks-add-svn40744-33.fc26.2.noarch
texlive-l3experimental-svn41163-33.fc26.2.noarch
texlive-xetex-bin-svn41091-33.20160520.fc26.2.s390x
kbd-misc-2.0.4-2.fc26.noarch
libpng-devel-1.6.28-2.fc26.s390x
ghostscript-core-9.20-10.fc26.s390x
libXfixes-devel-5.0.3-2.fc26.s390x
libverto-devel-0.2.6-7.fc26.s390x
mesa-libEGL-devel-17.2.4-2.fc26.s390x
popt-devel-1.16-12.fc26.s390x
readline-devel-7.0-5.fc26.s390x
cyrus-sasl-devel-2.1.26-32.fc26.s390x
sendmail-8.15.2-19.fc26.s390x
systemd-bootchart-231-3.fc26.s390x
perl-IO-Socket-SSL-2.049-1.fc26.noarch
python2-enchant-1.6.10-1.fc26.noarch
perl-generators-1.10-2.fc26.noarch
createrepo-0.10.3-11.fc26.noarch
nss-tools-3.34.0-1.0.fc26.s390x
pulseaudio-libs-glib2-11.1-7.fc26.s390x
dhcp-libs-4.3.5-10.fc26.s390x
libtiff-4.0.9-1.fc26.s390x
python-srpm-macros-3-21.fc26.noarch
libcurl-7.53.1-14.fc26.s390x
gnupg2-2.2.4-1.fc26.s390x
libtalloc-2.1.11-1.fc26.s390x
nfs-utils-2.2.1-4.rc2.fc26.s390x
qt5-srpm-macros-5.9.4-2.fc26.noarch
python2-dnf-plugins-core-2.1.5-4.fc26.noarch
mariadb-libs-10.1.30-2.fc26.s390x
bind-libs-9.11.2-1.P1.fc26.s390x
acpica-tools-20180105-1.fc26.s390x
perl-podlators-4.09-3.fc26.noarch
fontpackages-filesystem-1.44-18.fc26.noarch
vte-profile-0.48.4-1.fc26.s390x
texlive-kpathsea-doc-svn41139-33.fc26.2.noarch
zlib-1.2.11-2.fc26.s390x
readline-7.0-5.fc26.s390x
libattr-2.4.47-18.fc26.s390x
libglvnd-1.0.0-1.fc26.s390x
lz4-libs-1.8.0-1.fc26.s390x
jansson-2.10-2.fc26.s390x
perl-File-Path-2.12-367.fc26.noarch
perl-Unicode-EastAsianWidth-1.33-9.fc26.noarch
hunspell-1.5.4-2.fc26.s390x
libasyncns-0.8-11.fc26.s390x
libnetfilter_conntrack-1.0.6-2.fc26.s390x
perl-Storable-2.56-368.fc26.s390x
autoconf-2.69-24.fc26.noarch
device-mapper-persistent-data-0.6.3-5.fc26.s390x
quota-4.03-9.fc26.s390x
crypto-policies-20170606-1.git7c32281.fc26.noarch
glib2-2.52.3-2.fc26.s390x
python2-idna-2.5-1.fc26.noarch
python2-libcomps-0.1.8-3.fc26.s390x
gsettings-desktop-schemas-3.24.1-1.fc26.s390x
javapackages-tools-4.7.0-17.fc26.noarch
libselinux-python3-2.6-7.fc26.s390x
python-backports-1.0-9.fc26.s390x
python2-cryptography-2.0.2-2.fc26.s390x
libselinux-python-2.6-7.fc26.s390x
Lmod-7.5.3-1.fc26.s390x
fipscheck-lib-1.5.0-1.fc26.s390x
elfutils-libs-0.169-1.fc26.s390x
krb5-libs-1.15.2-4.fc26.s390x
libuser-0.62-6.fc26.s390x
npth-1.5-1.fc26.s390x
packagedb-cli-2.14.1-2.fc26.noarch
ustr-1.0.4-22.fc26.s390x
device-mapper-1.02.137-6.fc26.s390x
polkit-pkla-compat-0.1-8.fc26.s390x
fakeroot-1.22-1.fc26.s390x
libXmu-1.1.2-5.fc26.s390x
cairo-gobject-1.14.10-1.fc26.s390x
texlive-booktabs-svn40846-33.fc26.2.noarch
texlive-dvips-bin-svn40987-33.20160520.fc26.2.s390x
texlive-float-svn15878.1.3d-33.fc26.2.noarch
texlive-tex-svn40793-33.fc26.2.noarch
texlive-fancyref-svn15878.0.9c-33.fc26.2.noarch
texlive-manfnt-font-svn35799.0-33.fc26.2.noarch
texlive-cmap-svn41168-33.fc26.2.noarch
texlive-hyph-utf8-svn41189-33.fc26.2.noarch
texlive-paralist-svn39247-33.fc26.2.noarch
texlive-trimspaces-svn15878.1.1-33.fc26.2.noarch
texlive-tipa-svn29349.1.3-33.fc26.2.noarch
texlive-l3packages-svn41246-33.fc26.2.noarch
texlive-pst-pdf-svn31660.1.1v-33.fc26.2.noarch
texlive-tex-gyre-svn18651.2.004-33.fc26.2.noarch
texlive-beamer-svn36461.3.36-33.fc26.2.noarch
gd-2.2.5-1.fc26.s390x
elfutils-libelf-devel-0.169-1.fc26.s390x
gc-devel-7.6.0-2.fc26.s390x
libXft-devel-2.3.2-5.fc26.s390x
krb5-devel-1.15.2-4.fc26.s390x
rpm-devel-4.13.0.2-1.fc26.s390x
bluez-libs-devel-5.46-6.fc26.s390x
systemtap-3.2-2.fc26.s390x
trousers-0.3.13-7.fc26.s390x
iproute-tc-4.11.0-1.fc26.s390x
libgnome-keyring-3.12.0-8.fc26.s390x
perl-File-ShareDir-1.102-8.fc26.noarch
python2-paramiko-2.2.1-1.fc26.noarch
python2-openidc-client-0.4.0-1.20171113git54dee6e.fc26.noarch
openssh-server-7.5p1-4.fc26.s390x
pulseaudio-libs-11.1-7.fc26.s390x
python2-bodhi-2.12.2-3.fc26.noarch
lua-libs-5.3.4-7.fc26.s390x
dhcp-common-4.3.5-10.fc26.noarch
python3-pip-9.0.1-11.fc26.noarch
python3-sssdconfig-1.16.0-4.fc26.noarch
python2-py-1.4.34-1.fc26.noarch
glibc-common-2.25-13.fc26.s390x
webkitgtk4-jsc-2.18.6-1.fc26.s390x
python3-libs-3.6.4-2.fc26.s390x
glibc-devel-2.25-13.fc26.s390x
pcre2-10.23-13.fc26.s390x
linux-firmware-20171215-82.git2451bb22.fc26.noarch
glusterfs-api-devel-3.10.10-1.fc26.s390x
libfdt-devel-1.4.6-1.fc26.s390x
audit-2.8.2-1.fc26.s390x
perl-Socket-2.027-1.fc26.s390x
nosync-1.0-6.fc26.s390x
gpg-pubkey-95a43f54-5284415a
gpg-pubkey-fdb19c98-56fd6333
gpg-pubkey-64dab85d-57d33e22
firewalld-filesystem-0.4.4.5-1.fc26.noarch
xkeyboard-config-2.21-3.fc26.noarch
texlive-texlive-common-doc-svn40682-33.fc26.2.noarch
ncurses-base-6.0-8.20170212.fc26.noarch
libselinux-2.6-7.fc26.s390x
bzip2-libs-1.0.6-22.fc26.s390x
libdb-5.3.28-24.fc26.s390x
mpfr-3.1.5-3.fc26.s390x
file-libs-5.30-11.fc26.s390x
libunistring-0.9.7-1.fc26.s390x
libxslt-1.1.29-1.fc26.s390x
gdbm-1.13-1.fc26.s390x
libepoxy-1.4.3-1.fc26.s390x
libpsl-0.18.0-1.fc26.s390x
perl-Carp-1.40-366.fc26.noarch
e2fsprogs-libs-1.43.4-2.fc26.s390x
libmnl-1.0.4-2.fc26.s390x
openjpeg2-2.2.0-3.fc26.s390x
perl-PathTools-3.63-367.fc26.s390x
perl-File-Temp-0.230.400-2.fc26.noarch
perl-XML-Parser-2.44-6.fc26.s390x
libss-1.43.4-2.fc26.s390x
ilmbase-2.2.0-8.fc26.s390x
fuse-libs-2.9.7-2.fc26.s390x
libdaemon-0.14-11.fc26.s390x
libbasicobjects-0.1.1-34.fc26.s390x
iptables-1.6.1-2.fc26.s390x
perl-TermReadKey-2.37-2.fc26.s390x
perl-Term-ANSIColor-4.06-2.fc26.noarch
perl-libintl-perl-1.26-2.fc26.s390x
usbredir-0.7.1-3.fc26.s390x
fftw-libs-double-3.3.5-4.fc26.s390x
libiscsi-1.15.0-3.fc26.s390x
ttmkfdir-3.0.9-49.fc26.s390x
texlive-base-2016-33.20160520.fc26.1.noarch
python2-six-1.10.0-9.fc26.noarch
atk-2.24.0-1.fc26.s390x
python2-kitchen-1.2.4-6.fc26.noarch
guile-2.0.14-1.fc26.s390x
desktop-file-utils-0.23-3.fc26.s390x
pyxattr-0.5.3-10.fc26.s390x
shared-mime-info-1.8-2.fc26.s390x
libyaml-0.1.7-2.fc26.s390x
python3-PyYAML-3.12-3.fc26.s390x
openssh-7.5p1-4.fc26.s390x
kernel-core-4.13.16-202.fc26.s390x
perl-Git-2.13.6-2.fc26.noarch
openssl-1.1.0g-1.fc26.s390x
gawk-4.1.4-6.fc26.s390x
gnutls-3.5.16-4.fc26.s390x
openldap-2.4.45-2.fc26.s390x
NetworkManager-libnm-1.8.2-4.fc26.s390x
gnutls-devel-3.5.16-4.fc26.s390x
python2-urllib3-1.20-2.fc26.noarch
sssd-nfs-idmap-1.16.0-4.fc26.s390x
libsss_sudo-1.16.0-4.fc26.s390x
python3-py-1.4.34-1.fc26.noarch
perl-ExtUtils-Command-7.24-3.fc26.noarch
tzdata-2018c-1.fc26.noarch
libcrypt-nss-2.25-13.fc26.s390x
libstdc++-devel-7.3.1-2.fc26.s390x
rpcbind-0.2.4-8.rc3.fc26.s390x
gdb-headless-8.0.1-36.fc26.s390x
python3-dnf-plugins-extras-common-2.0.5-1.fc26.noarch
glibc-headers-2.25-13.fc26.s390x
libfdt-1.4.6-1.fc26.s390x
pcre-utf32-8.41-5.fc26.s390x
wget-1.19.4-1.fc26.s390x
mariadb-common-10.1.30-2.fc26.s390x
glusterfs-extra-xlators-3.10.10-1.fc26.s390x
python2-dnf-plugin-migrate-2.1.5-4.fc26.noarch
pcre2-devel-10.23-13.fc26.s390x
perl-threads-shared-1.58-1.fc26.s390x
gcc-c++-7.3.1-2.fc26.s390x
ImageMagick-libs-6.9.9.27-1.fc26.s390x
poppler-0.52.0-11.fc26.s390x
perl-Data-Dumper-2.161-4.fc26.s390x
python2-dnf-plugins-extras-common-2.0.5-1.fc26.noarch
gcc-debuginfo-7.3.1-2.fc26.s390x
libgudev-232-1.fc26.s390x
python3-javapackages-4.7.0-17.fc26.noarch
python3-ply-3.9-3.fc26.noarch
python3-systemd-234-1.fc26.s390x
python3-requests-2.13.0-1.fc26.noarch
blktrace-1.1.0-4.fc26.s390x
python2-asn1crypto-0.23.0-1.fc26.noarch
python2-cffi-1.9.1-2.fc26.s390x
python2-sphinx_rtd_theme-0.2.4-1.fc26.noarch
lua-json-1.3.2-7.fc26.noarch
libcephfs1-10.2.7-2.fc26.s390x
glib-networking-2.50.0-2.fc26.s390x
elfutils-default-yama-scope-0.169-1.fc26.noarch
libedit-3.1-17.20160618cvs.fc26.s390x
libverto-libev-0.2.6-7.fc26.s390x
libserf-1.3.9-3.fc26.s390x
python2-kerberos-1.2.5-3.fc26.s390x
libsrtp-1.5.4-4.fc26.s390x
lzo-minilzo-2.08-9.fc26.s390x
librepo-1.8.0-1.fc26.s390x
koji-1.14.0-1.fc26.noarch
sg3_utils-1.42-1.fc26.s390x
policycoreutils-2.6-6.fc26.s390x
systemtap-client-3.2-2.fc26.s390x
lvm2-2.02.168-6.fc26.s390x
device-mapper-multipath-libs-0.4.9-88.fc26.s390x
s390utils-cmsfs-1.36.1-3.fc26.s390x
libXdamage-1.1.4-9.fc26.s390x
libXaw-1.0.13-5.fc26.s390x
brltty-5.5-5.fc26.s390x
librsvg2-2.40.18-1.fc26.s390x
texlive-tetex-bin-svn36770.0-33.20160520.fc26.2.noarch
texlive-etex-pkg-svn39355-33.fc26.2.noarch
texlive-graphics-svn41015-33.fc26.2.noarch
texlive-dvips-svn41149-33.fc26.2.noarch
texlive-zapfding-svn31835.0-33.fc26.2.noarch
texlive-footmisc-svn23330.5.5b-33.fc26.2.noarch
texlive-makeindex-svn40768-33.fc26.2.noarch
texlive-pst-ovl-svn40873-33.fc26.2.noarch
texlive-texlive-scripts-svn41433-33.fc26.2.noarch
texlive-ltabptch-svn17533.1.74d-33.fc26.2.noarch
texlive-euro-svn22191.1.1-33.fc26.2.noarch
texlive-mflogo-font-svn36898.1.002-33.fc26.2.noarch
texlive-zapfchan-svn31835.0-33.fc26.2.noarch
texlive-cmextra-svn32831.0-33.fc26.2.noarch
texlive-finstrut-svn21719.0.5-33.fc26.2.noarch
texlive-hyphen-base-svn41138-33.fc26.2.noarch
texlive-marginnote-svn41382-33.fc26.2.noarch
texlive-parallel-svn15878.0-33.fc26.2.noarch
texlive-sepnum-svn20186.2.0-33.fc26.2.noarch
texlive-environ-svn33821.0.3-33.fc26.2.noarch
texlive-type1cm-svn21820.0-33.fc26.2.noarch
texlive-xunicode-svn30466.0.981-33.fc26.2.noarch
texlive-attachfile-svn38830-33.fc26.2.noarch
texlive-fontspec-svn41262-33.fc26.2.noarch
texlive-fancyvrb-svn18492.2.8-33.fc26.2.noarch
texlive-pst-pdf-bin-svn7838.0-33.20160520.fc26.2.noarch
texlive-xcolor-svn41044-33.fc26.2.noarch
texlive-pdfpages-svn40638-33.fc26.2.noarch
texlive-sansmathaccent-svn30187.0-33.fc26.2.noarch
texlive-ucs-svn35853.2.2-33.fc26.2.noarch
texlive-dvipdfmx-bin-svn40273-33.20160520.fc26.2.s390x
libotf-0.9.13-8.fc26.s390x
go-srpm-macros-2-8.fc26.noarch
mesa-libwayland-egl-devel-17.2.4-2.fc26.s390x
ghostscript-9.20-10.fc26.s390x
libcephfs_jni-devel-10.2.7-2.fc26.s390x
libXdamage-devel-1.1.4-9.fc26.s390x
freetype-devel-2.7.1-9.fc26.s390x
ncurses-devel-6.0-8.20170212.fc26.s390x
fontconfig-devel-2.12.6-4.fc26.s390x
cairo-devel-1.14.10-1.fc26.s390x
libselinux-devel-2.6-7.fc26.s390x
guile-devel-2.0.14-1.fc26.s390x
libcap-ng-devel-0.7.8-3.fc26.s390x
bash-completion-2.6-1.fc26.noarch
libXevie-1.0.3-12.fc26.s390x
python-firewall-0.4.4.5-1.fc26.noarch
python3-html5lib-0.999-13.fc26.noarch
python2-simplejson-3.10.0-3.fc26.s390x
flex-2.6.1-3.fc26.s390x
telnet-0.17-69.fc26.s390x
gpg-pubkey-8e1431d5-53bcbac7
emacs-filesystem-25.3-3.fc26.noarch
fontawesome-fonts-4.7.0-2.fc26.noarch
fontawesome-fonts-web-4.7.0-2.fc26.noarch
rpmconf-base-1.0.19-1.fc26.noarch
info-6.3-3.fc26.s390x
sqlite-libs-3.20.1-1.fc26.s390x
texlive-lib-2016-33.20160520.fc26.1.s390x
libicu-57.1-7.fc26.s390x
libcap-ng-0.7.8-3.fc26.s390x
nettle-3.3-2.fc26.s390x
libidn2-2.0.4-1.fc26.s390x
lcms2-2.8-3.fc26.s390x
dbus-libs-1.11.18-1.fc26.s390x
perl-Exporter-5.72-367.fc26.noarch
unzip-6.0-34.fc26.s390x
iproute-4.11.0-1.fc26.s390x
zip-3.0-18.fc26.s390x
perl-constant-1.33-368.fc26.noarch
perl-MIME-Base64-3.15-366.fc26.s390x
lua-posix-33.3.1-4.fc26.s390x
bzip2-1.0.6-22.fc26.s390x
hyphen-2.8.8-6.fc26.s390x
libdvdread-5.0.3-4.fc26.s390x
libcollection-0.7.0-34.fc26.s390x
libdvdnav-5.0.3-5.fc26.s390x
perl-version-0.99.18-1.fc26.s390x
perl-Encode-2.88-6.fc26.s390x
automake-1.15-9.fc26.noarch
plymouth-core-libs-0.9.3-0.7.20160620git0e65b86c.fc26.s390x
hesiod-3.2.1-7.fc26.s390x
jasper-libs-2.0.14-1.fc26.s390x
mozjs17-17.0.0-18.fc26.s390x
fontconfig-2.12.6-4.fc26.s390x
harfbuzz-1.4.4-1.fc26.s390x
alsa-lib-1.1.4.1-1.fc26.s390x
make-4.2.1-2.fc26.s390x
gobject-introspection-1.52.1-1.fc26.s390x
hicolor-icon-theme-0.15-5.fc26.noarch
gdk-pixbuf2-2.36.9-1.fc26.s390x
libgusb-0.2.11-1.fc26.s390x
libdhash-0.5.0-34.fc26.s390x
python2-bcrypt-3.1.4-2.fc26.s390x
PyYAML-3.12-3.fc26.s390x
nss-softokn-freebl-3.34.0-1.0.fc26.s390x
kernel-modules-4.13.16-202.fc26.s390x
git-2.13.6-2.fc26.s390x
openssl-devel-1.1.0g-1.fc26.s390x
copy-jdk-configs-3.3-2.fc26.noarch
python3-setuptools-37.0.0-1.fc26.noarch
kernel-core-4.14.8-200.fc26.s390x
NetworkManager-1.8.2-4.fc26.s390x
libjpeg-turbo-devel-1.5.3-1.fc26.s390x
lua-5.3.4-7.fc26.s390x
boost-thread-1.63.0-10.fc26.s390x
libwebp-0.6.1-1.fc26.s390x
kernel-devel-4.14.8-200.fc26.s390x
perl-autodie-2.29-367.fc26.noarch
tzdata-java-2018c-1.fc26.noarch
glusterfs-3.10.10-1.fc26.s390x
glusterfs-api-3.10.10-1.fc26.s390x
pcre-8.41-5.fc26.s390x
createrepo_c-0.10.0-15.fc26.s390x
mock-core-configs-28.2-1.fc26.noarch
libgfortran-7.3.1-2.fc26.s390x
libdrm-2.4.89-1.fc26.s390x
pcre-utf16-8.41-5.fc26.s390x
vim-common-8.0.1438-1.fc26.s390x
mariadb-config-10.1.30-2.fc26.s390x
python2-gluster-3.10.10-1.fc26.s390x
java-1.8.0-openjdk-1.8.0.161-5.b14.fc26.s390x
libtasn1-devel-4.13-1.fc26.s390x
vim-enhanced-8.0.1438-1.fc26.s390x
gcc-gdb-plugin-7.3.1-2.fc26.s390x
gnupg2-smime-2.2.4-1.fc26.s390x
python2-libxml2-2.9.7-1.fc26.s390x
net-tools-2.0-0.44.20160912git.fc26.s390x
python2-requests-kerberos-0.12.0-1.fc26.noarch
gcc-base-debuginfo-7.3.1-2.fc26.s390x
python3-lxml-4.1.1-1.fc26.s390x
python3-ordered-set-2.0.0-6.fc26.noarch
python3-rpmconf-1.0.19-1.fc26.noarch
python-offtrac-0.1.0-9.fc26.noarch
python2-pycparser-2.14-10.fc26.noarch
python2-sphinx-theme-alabaster-0.7.9-3.fc26.noarch
python2-pysocks-1.6.7-1.fc26.noarch
lua-lpeg-1.0.1-2.fc26.s390x
libproxy-0.4.15-2.fc26.s390x
crontabs-1.11-14.20150630git.fc26.noarch
libev-4.24-2.fc26.s390x
libsigsegv-2.11-1.fc26.s390x
fedora-cert-0.6.0.1-2.fc26.noarch
drpm-0.3.0-6.fc26.s390x
python2-cccolutils-1.5-3.fc26.s390x
m17n-lib-1.7.0-6.fc26.s390x
lsscsi-0.28-4.fc26.s390x
python2-koji-1.14.0-1.fc26.noarch
python3-koji-1.14.0-1.fc26.noarch
python3-gpg-1.8.0-12.fc26.s390x
sg3_utils-libs-1.42-1.fc26.s390x
SDL2-2.0.7-2.fc26.s390x
util-linux-2.30.2-1.fc26.s390x
s390utils-mon_statd-1.36.1-3.fc26.s390x
GConf2-3.2.6-17.fc26.s390x
systemd-container-233-7.fc26.s390x
usermode-1.111-9.fc26.s390x
libXt-1.1.5-4.fc26.s390x
libXpm-3.5.12-2.fc26.s390x
at-spi2-core-2.24.1-1.fc26.s390x
cairo-1.14.10-1.fc26.s390x
texlive-kpathsea-bin-svn40473-33.20160520.fc26.2.s390x
texlive-ifluatex-svn41346-33.fc26.2.noarch
texlive-babel-svn40706-33.fc26.2.noarch
texlive-colortbl-svn29803.v1.0a-33.fc26.2.noarch
texlive-marvosym-svn29349.2.2a-33.fc26.2.noarch
texlive-euler-svn17261.2.5-33.fc26.2.noarch
texlive-latexconfig-svn40274-33.fc26.2.noarch
texlive-plain-svn40274-33.fc26.2.noarch
texlive-texconfig-bin-svn29741.0-33.20160520.fc26.2.noarch
giflib-4.1.6-16.fc26.s390x
texlive-microtype-svn41127-33.fc26.2.noarch
texlive-eurosym-svn17265.1.4_subrfix-33.fc26.2.noarch
texlive-symbol-svn31835.0-33.fc26.2.noarch
texlive-chngcntr-svn17157.1.0a-33.fc26.2.noarch
texlive-euenc-svn19795.0.1h-33.fc26.2.noarch
texlive-luatex-svn40963-33.fc26.2.noarch
texlive-knuth-local-svn38627-33.fc26.2.noarch
texlive-mparhack-svn15878.1.4-33.fc26.2.noarch
texlive-rcs-svn15878.0-33.fc26.2.noarch
texlive-texlive-msg-translations-svn41431-33.fc26.2.noarch
texlive-updmap-map-svn41159-33.fc26.2.noarch
texlive-geometry-svn19716.5.6-33.fc26.2.noarch
texlive-memoir-svn41203-33.fc26.2.noarch
texlive-l3kernel-svn41246-33.fc26.2.noarch
texlive-pst-eps-svn15878.1.0-33.fc26.2.noarch
texlive-pst-text-svn15878.1.00-33.fc26.2.noarch
texlive-amscls-svn36804.0-33.fc26.2.noarch
texlive-pst-slpe-svn24391.1.31-33.fc26.2.noarch
texlive-extsizes-svn17263.1.4a-33.fc26.2.noarch
texlive-xetex-def-svn40327-33.fc26.2.noarch
texlive-collection-latex-svn41011-33.20160520.fc26.2.noarch
gstreamer1-plugins-base-1.12.3-1.fc26.s390x
fpc-srpm-macros-1.1-2.fc26.noarch
xorg-x11-proto-devel-7.7-22.fc26.noarch
urw-fonts-2.4-23.fc26.noarch
atk-devel-2.24.0-1.fc26.s390x
libxcb-devel-1.12-3.fc26.s390x
libXrandr-devel-1.5.1-2.fc26.s390x
libcom_err-devel-1.43.4-2.fc26.s390x
dbus-devel-1.11.18-1.fc26.s390x
libepoxy-devel-1.4.3-1.fc26.s390x
libicu-devel-57.1-7.fc26.s390x
p11-kit-devel-0.23.9-2.fc26.s390x
rpm-build-4.13.0.2-1.fc26.s390x
libssh2-devel-1.8.0-5.fc26.s390x
graphviz-2.40.1-4.fc26.s390x
zlib-static-1.2.11-2.fc26.s390x
mesa-libgbm-devel-17.2.4-2.fc26.s390x
screen-4.6.2-1.fc26.s390x
python-osbs-client-0.39.1-1.fc26.noarch
pyparsing-2.1.10-3.fc26.noarch
python3-pyasn1-0.2.3-1.fc26.noarch
python2-html5lib-0.999-13.fc26.noarch
teamd-1.27-1.fc26.s390x
hardlink-1.3-1.fc26.s390x
chrpath-0.16-4.fc26.s390x
texlive-pdftex-doc-svn41149-33.fc26.2.noarch
nspr-4.17.0-1.fc26.s390x
grep-3.1-1.fc26.s390x
libacl-2.2.52-15.fc26.s390x
cpio-2.12-4.fc26.s390x
libatomic_ops-7.4.4-2.fc26.s390x
p11-kit-0.23.9-2.fc26.s390x
gc-7.6.0-2.fc26.s390x
psmisc-22.21-9.fc26.s390x
systemd-libs-233-7.fc26.s390x
xz-5.2.3-2.fc26.s390x
perl-libs-5.24.3-395.fc26.s390x
libpcap-1.8.1-3.fc26.s390x
perl-macros-5.24.3-395.fc26.s390x
perl-parent-0.236-2.fc26.noarch
perl-Text-Unidecode-1.30-2.fc26.noarch
newt-0.52.20-1.fc26.s390x
libcomps-0.1.8-3.fc26.s390x
libfontenc-1.1.3-4.fc26.s390x
ipcalc-0.2.0-1.fc26.s390x
libnfnetlink-1.0.1-9.fc26.s390x
libref_array-0.1.5-34.fc26.s390x
perl-Term-Cap-1.17-366.fc26.noarch
perl-Digest-1.17-367.fc26.noarch
perl-SelfLoader-1.23-395.fc26.noarch
perl-Pod-Simple-3.35-2.fc26.noarch
perl-URI-1.71-6.fc26.noarch
attr-2.4.47-18.fc26.s390x
gmp-c++-6.1.2-4.fc26.s390x
harfbuzz-icu-1.4.4-1.fc26.s390x
http-parser-2.7.1-5.fc26.s390x
libsodium-1.0.14-1.fc26.s390x
python-gssapi-1.2.0-5.fc26.s390x
nss-softokn-3.34.0-1.0.fc26.s390x
nss-devel-3.34.0-1.0.fc26.s390x
perl-libnet-3.11-1.fc26.noarch
kernel-devel-4.13.16-202.fc26.s390x
python2-libs-2.7.14-4.fc26.s390x
libwayland-client-1.13.0-3.fc26.s390x
python3-dnf-2.7.5-2.fc26.noarch
kernel-modules-4.14.8-200.fc26.s390x
NetworkManager-ppp-1.8.2-4.fc26.s390x
wayland-devel-1.13.0-3.fc26.s390x
kernel-4.14.8-200.fc26.s390x
boost-random-1.63.0-10.fc26.s390x
mailx-12.5-24.fc26.s390x
NetworkManager-glib-1.8.2-4.fc26.s390x
perl-IPC-System-Simple-1.25-12.fc26.noarch
vim-filesystem-8.0.1438-1.fc26.s390x
glusterfs-libs-3.10.10-1.fc26.s390x
sed-4.4-2.fc26.s390x
libassuan-2.5.1-1.fc26.s390x
createrepo_c-libs-0.10.0-15.fc26.s390x
dnf-utils-2.1.5-4.fc26.noarch
libobjc-7.3.1-2.fc26.s390x
dracut-046-8.git20180105.fc26.s390x
libseccomp-2.3.3-1.fc26.s390x
mock-1.4.8-1.fc26.noarch
python-sphinx-locale-1.5.6-1.fc26.noarch
pcre-devel-8.41-5.fc26.s390x
libxml2-devel-2.9.7-1.fc26.s390x
libseccomp-devel-2.3.3-1.fc26.s390x
fedora-upgrade-28.1-1.fc26.noarch
gcc-gfortran-7.3.1-2.fc26.s390x
gdb-8.0.1-36.fc26.s390x
unbound-libs-1.6.8-1.fc26.s390x
man-db-2.7.6.1-9.fc26.s390x
python2-rpm-macros-3-21.fc26.noarch
kernel-devel-4.15.4-200.fc26.s390x
libcroco-0.6.12-1.fc26.s390x
libssh2-1.8.0-5.fc26.s390x
json-glib-1.2.6-1.fc26.s390x
libevent-2.0.22-3.fc26.s390x
gdk-pixbuf2-modules-2.36.9-1.fc26.s390x
colord-libs-1.3.5-1.fc26.s390x
python3-magic-5.30-11.fc26.noarch
python3-gobject-base-3.24.1-1.fc26.s390x
python3-pyroute2-0.4.13-1.fc26.noarch
python3-pysocks-1.6.7-1.fc26.noarch
python2-click-6.7-3.fc26.noarch
python-munch-2.1.0-2.fc26.noarch
python2-ply-3.9-3.fc26.noarch
python2-snowballstemmer-1.2.1-3.fc26.noarch
python-magic-5.30-11.fc26.noarch
python-beautifulsoup4-4.6.0-1.fc26.noarch
python2-gitdb-2.0.3-1.fc26.noarch
librados-devel-10.2.7-2.fc26.s390x
libcacard-2.5.3-1.fc26.s390x
libmodman-2.0.1-13.fc26.s390x
zziplib-0.13.62-8.fc26.s390x
lksctp-tools-1.0.16-6.fc26.s390x
procmail-3.22-44.fc26.s390x
libthai-0.1.25-2.fc26.s390x
libpipeline-1.4.1-3.fc26.s390x
python2-pycurl-7.43.0-8.fc26.s390x
deltarpm-3.6-19.fc26.s390x
subversion-libs-1.9.7-1.fc26.s390x
python-krbV-1.0.90-13.fc26.s390x
m17n-db-1.7.0-8.fc26.noarch
linux-atm-libs-2.5.1-17.fc26.s390x
python2-rpm-4.13.0.2-1.fc26.s390x
python2-librepo-1.8.0-1.fc26.s390x
qrencode-libs-3.4.4-1.fc26.s390x
s390utils-iucvterm-1.36.1-3.fc26.s390x
libsmartcols-2.30.2-1.fc26.s390x
dbus-1.11.18-1.fc26.s390x
systemd-udev-233-7.fc26.s390x
device-mapper-event-1.02.137-6.fc26.s390x
polkit-0.113-8.fc26.s390x
libwmf-lite-0.2.8.4-53.fc26.s390x
libXcomposite-0.4.4-9.fc26.s390x
libXcursor-1.1.14-8.fc26.s390x
at-spi2-atk-2.24.1-1.fc26.s390x
pango-1.40.12-1.fc26.s390x
texlive-metafont-bin-svn40987-33.20160520.fc26.2.s390x
texlive-url-svn32528.3.4-33.fc26.2.noarch
texlive-fp-svn15878.0-33.fc26.2.noarch
texlive-latex-fonts-svn28888.0-33.fc26.2.noarch
texlive-mptopdf-bin-svn18674.0-33.20160520.fc26.2.noarch
texlive-fancybox-svn18304.1.4-33.fc26.2.noarch
texlive-lua-alt-getopt-svn29349.0.7.0-33.fc26.2.noarch
texlive-tex-bin-svn40987-33.20160520.fc26.2.s390x
texlive-texconfig-svn40768-33.fc26.2.noarch
texlive-wasy2-ps-svn35830.0-33.fc26.2.noarch
texlive-psfrag-svn15878.3.04-33.fc26.2.noarch
texlive-helvetic-svn31835.0-33.fc26.2.noarch
texlive-times-svn35058.0-33.fc26.2.noarch
texlive-cite-svn36428.5.5-33.fc26.2.noarch
texlive-fancyhdr-svn15878.3.1-33.fc26.2.noarch
texlive-luatex-bin-svn41091-33.20160520.fc26.2.s390x
texlive-lm-math-svn36915.1.959-33.fc26.2.noarch
texlive-ntgclass-svn15878.2.1a-33.fc26.2.noarch
texlive-sansmath-svn17997.1.1-33.fc26.2.noarch
texlive-textcase-svn15878.0-33.fc26.2.noarch
texlive-unicode-data-svn39808-33.fc26.2.noarch
texlive-breakurl-svn29901.1.40-33.fc26.2.noarch
texlive-latex-svn40218-33.fc26.2.noarch
texlive-lualatex-math-svn40621-33.fc26.2.noarch
texlive-pst-coil-svn37377.1.07-33.fc26.2.noarch
texlive-pst-plot-svn41242-33.fc26.2.noarch
texlive-unicode-math-svn38462-33.fc26.2.noarch
texlive-pst-blur-svn15878.2.0-33.fc26.2.noarch
texlive-cm-super-svn15878.0-33.fc26.2.noarch
texlive-wasysym-svn15878.2.0-33.fc26.2.noarch
texlive-collection-fontsrecommended-svn35830.0-33.20160520.fc26.2.noarch
libXv-1.0.11-2.fc26.s390x
ghc-srpm-macros-1.4.2-5.fc26.noarch
latex2html-2017.2-2.fc26.noarch
libXau-devel-1.0.8-7.fc26.s390x
libXcursor-devel-1.1.14-8.fc26.s390x
graphite2-devel-1.3.10-1.fc26.s390x
pixman-devel-0.34.0-3.fc26.s390x
wayland-protocols-devel-1.9-1.fc26.noarch
mesa-libGLES-devel-17.2.4-2.fc26.s390x
vte291-devel-0.48.4-1.fc26.s390x
ceph-devel-compat-10.2.7-2.fc26.s390x
lzo-devel-2.08-9.fc26.s390x
libiscsi-devel-1.15.0-3.fc26.s390x
avahi-autoipd-0.6.32-7.fc26.s390x
rpm-plugin-systemd-inhibit-4.13.0.2-1.fc26.s390x
python2-ndg_httpsclient-0.4.0-7.fc26.noarch
gettext-0.19.8.1-9.fc26.s390x
btrfs-progs-4.9.1-2.fc26.s390x
fedora-logos-26.0.1-1.fc26.s390x
dejagnu-1.6-2.fc26.noarch
libaio-devel-0.3.110-7.fc26.s390x
dos2unix-7.3.4-2.fc26.s390x
popt-1.16-12.fc26.s390x
tar-1.29-5.fc26.s390x
avahi-libs-0.6.32-7.fc26.s390x
m4-1.4.18-3.fc26.s390x
perl-Time-Local-1.250-2.fc26.noarch
libmetalink-0.1.3-2.fc26.s390x
jbigkit-libs-2.1-6.fc26.s390x
netpbm-10.80.00-2.fc26.s390x
perl-Digest-MD5-2.55-3.fc26.s390x
perl-Getopt-Long-2.49.1-2.fc26.noarch
libglvnd-opengl-1.0.0-1.fc26.s390x
libattr-devel-2.4.47-18.fc26.s390x
teckit-2.5.1-16.fc26.s390x
python3-six-1.10.0-9.fc26.noarch
python3-libcomps-0.1.8-3.fc26.s390x
python3-pyparsing-2.1.10-3.fc26.noarch
python2-markupsafe-0.23-13.fc26.s390x
python2-mock-2.0.0-4.fc26.noarch
python2-yubico-1.3.2-7.fc26.noarch
python2-smmap-2.0.3-1.fc26.noarch
librbd-devel-10.2.7-2.fc26.s390x
libnghttp2-1.21.1-1.fc26.s390x
ykpers-1.18.0-2.fc26.s390x
python3-librepo-1.8.0-1.fc26.s390x
systemtap-runtime-3.2-2.fc26.s390x
geoclue2-2.4.5-4.fc26.s390x
initscripts-9.72-1.fc26.s390x
plymouth-0.9.3-0.7.20160620git0e65b86c.fc26.s390x
ebtables-2.0.10-22.fc26.s390x
gssproxy-0.7.0-9.fc26.s390x
libXext-1.3.3-5.fc26.s390x
mesa-libEGL-17.2.4-2.fc26.s390x
texlive-texlive.infra-bin-svn40312-33.20160520.fc26.2.s390x
texlive-thumbpdf-svn34621.3.16-33.fc26.2.noarch
texlive-carlisle-svn18258.0-33.fc26.2.noarch
texlive-gsftopk-svn40768-33.fc26.2.noarch
texlive-pdftex-svn41149-33.fc26.2.noarch
texlive-crop-svn15878.1.5-33.fc26.2.noarch
texlive-pxfonts-svn15878.0-33.fc26.2.noarch
texlive-enctex-svn34957.0-33.fc26.2.noarch
texlive-kastrup-svn15878.0-33.fc26.2.noarch
texlive-pspicture-svn15878.0-33.fc26.2.noarch
texlive-varwidth-svn24104.0.92-33.fc26.2.noarch
texlive-currfile-svn40725-33.fc26.2.noarch
texlive-pst-grad-svn15878.1.06-33.fc26.2.noarch
texlive-latex-bin-svn41438-33.fc26.2.noarch
texlive-ltxmisc-svn21927.0-33.fc26.2.noarch
lasi-1.1.2-7.fc26.s390x
adwaita-icon-theme-3.24.0-2.fc26.noarch
xz-devel-5.2.3-2.fc26.s390x
xorg-x11-fonts-Type1-7.5-17.fc26.noarch
libXi-devel-1.7.9-2.fc26.s390x
at-spi2-atk-devel-2.24.1-1.fc26.s390x
pango-devel-1.40.12-1.fc26.s390x
libcacard-devel-2.5.3-1.fc26.s390x
subversion-1.9.7-1.fc26.s390x
sudo-1.8.21p2-1.fc26.s390x
pykickstart-2.35-2.fc26.noarch
e2fsprogs-1.43.4-2.fc26.s390x
libbsd-0.8.3-3.fc26.s390x
c-ares-1.13.0-1.fc26.s390x
python2-pyxdg-0.25-12.fc26.noarch
nss-softokn-freebl-devel-3.34.0-1.0.fc26.s390x
strace-4.20-1.fc26.s390x
valgrind-3.13.0-12.fc26.s390x
libsss_idmap-1.16.0-4.fc26.s390x
gnutls-c++-3.5.16-4.fc26.s390x
libwayland-server-1.13.0-3.fc26.s390x
dhcp-client-4.3.5-10.fc26.s390x
man-pages-4.09-4.fc26.noarch
libffi-devel-3.1-12.fc26.s390x
libxml2-2.9.7-1.fc26.s390x
kmod-25-1.fc26.s390x
dnf-plugins-core-2.1.5-4.fc26.noarch
kmod-libs-25-1.fc26.s390x
pigz-2.4-1.fc26.s390x
pkgconf-pkg-config-1.3.12-2.fc26.s390x
libdrm-devel-2.4.89-1.fc26.s390x
gcc-go-7.3.1-2.fc26.s390x
system-python-3.6.4-2.fc26.s390x
python-rpm-macros-3-21.fc26.noarch
gpg-pubkey-a29cb19c-53bcbba6
quota-nls-4.03-9.fc26.noarch
xz-libs-5.2.3-2.fc26.s390x
gmp-6.1.2-4.fc26.s390x
file-5.30-11.fc26.s390x
libusbx-1.0.21-2.fc26.s390x
binutils-2.27-28.fc26.s390x
perl-Errno-1.25-395.fc26.s390x
perl-HTTP-Tiny-0.070-2.fc26.noarch
xml-common-0.6.3-45.fc26.noarch
opus-1.2.1-1.fc26.s390x
flac-libs-1.3.2-2.fc26.s390x
libacl-devel-2.2.52-15.fc26.s390x
coreutils-common-8.27-7.fc26.s390x
cracklib-2.9.6-5.fc26.s390x
pyliblzma-0.5.3-17.fc26.s390x
libnotify-0.7.7-2.fc26.s390x
python3-idna-2.5-1.fc26.noarch
python3-pyOpenSSL-16.2.0-6.fc26.noarch
python2-pbr-1.10.0-4.fc26.noarch
pyusb-1.0.0-4.fc26.noarch
librbd1-10.2.7-2.fc26.s390x
libnfs-1.9.8-3.fc26.s390x
libsolv-0.6.30-2.fc26.s390x
python3-pycurl-7.43.0-8.fc26.s390x
libyubikey-1.13-3.fc26.s390x
rpmlint-1.10-5.fc26.noarch
python2-pygpgme-0.3-22.fc26.s390x
s390utils-base-1.36.1-3.fc26.s390x
ppp-2.4.7-11.fc26.s390x
s390utils-cpuplugd-1.36.1-3.fc26.s390x
libXrender-0.9.10-2.fc26.s390x
libglvnd-gles-1.0.0-1.fc26.s390x
texlive-texlive.infra-svn41280-33.fc26.2.noarch
texlive-lm-svn28119.2.004-33.fc26.2.noarch
texlive-babelbib-svn25245.1.31-33.fc26.2.noarch
texlive-index-svn24099.4.1beta-33.fc26.2.noarch
texlive-pdftex-bin-svn40987-33.20160520.fc26.2.s390x
texlive-csquotes-svn39538-33.fc26.2.noarch
texlive-rsfs-svn15878.0-33.fc26.2.noarch
texlive-etex-svn37057.0-33.fc26.2.noarch
texlive-knuth-lib-svn35820.0-33.fc26.2.noarch
texlive-pst-math-svn34786.0.63-33.fc26.2.noarch
texlive-utopia-svn15878.0-33.fc26.2.noarch
texlive-eso-pic-svn37925.2.0g-33.fc26.2.noarch
texlive-pst-fill-svn15878.1.01-33.fc26.2.noarch
texlive-latex-bin-bin-svn14050.0-33.20160520.fc26.2.noarch
texlive-jknapltx-svn19440.0-33.fc26.2.noarch
texlive-collection-latexrecommended-svn35765.0-33.20160520.fc26.2.noarch
adwaita-cursor-theme-3.24.0-2.fc26.noarch
xorg-x11-fonts-ISO8859-1-100dpi-7.5-17.fc26.noarch
libXcomposite-devel-0.4.4-9.fc26.s390x
at-spi2-core-devel-2.24.1-1.fc26.s390x
harfbuzz-devel-1.4.4-1.fc26.s390x
rpmdevtools-8.10-2.fc26.noarch
texi2html-5.0-5.fc26.noarch
libnfs-devel-1.9.8-3.fc26.s390x
firewalld-0.4.4.5-1.fc26.noarch
wpa_supplicant-2.6-12.fc26.s390x
systemtap-sdt-devel-3.2-2.fc26.s390x
newt-python-0.52.20-1.fc26.s390x
perl-Mozilla-CA-20160104-4.fc26.noarch
pth-2.0.7-28.fc26.s390x
python3-pyxdg-0.25-12.fc26.noarch
nss-softokn-devel-3.34.0-1.0.fc26.s390x
timedatex-0.4-3.fc26.s390x
libjpeg-turbo-1.5.3-1.fc26.s390x
libsss_nss_idmap-1.16.0-4.fc26.s390x
dnf-yum-2.7.5-2.fc26.noarch
libuv-devel-1.11.0-1.fc26.s390x
libstdc++-7.3.1-2.fc26.s390x
libgo-7.3.1-2.fc26.s390x
python3-dnf-plugins-core-2.1.5-4.fc26.noarch
gtk3-3.22.21-3.fc26.s390x
perl-threads-2.21-1.fc26.s390x
pkgconf-m4-1.3.12-2.fc26.noarch
gtk3-devel-3.22.21-3.fc26.s390x
gcc-objc-7.3.1-2.fc26.s390x
curl-7.53.1-14.fc26.s390x
vim-minimal-8.0.1438-1.fc26.s390x
python-async-0.6.1-9.fc22.s390x
poppler-data-0.4.7-7.fc26.noarch
ocaml-srpm-macros-4-2.fc26.noarch
libuuid-2.30.2-1.fc26.s390x
libgpg-error-1.25-2.fc26.s390x
graphite2-1.3.10-1.fc26.s390x
perl-Text-Tabs+Wrap-2013.0523-366.fc26.noarch
perl-Error-0.17024-8.fc26.noarch
which-2.21-2.fc26.s390x
libXau-1.0.8-7.fc26.s390x
orc-0.4.27-1.fc26.s390x
perl-Pod-Perldoc-3.28-1.fc26.noarch
libsndfile-1.0.28-6.fc26.s390x
patch-2.7.5-4.fc26.s390x
gzip-1.8-2.fc26.s390x
python-ipaddress-1.0.16-4.fc26.noarch
yum-metadata-parser-1.1.4-18.fc26.s390x
python3-dbus-1.2.4-6.fc26.s390x
python3-cryptography-2.0.2-2.fc26.s390x
python3-kickstart-2.35-2.fc26.noarch
python2-imagesize-0.7.1-5.fc26.noarch
python2-jinja2-2.9.6-1.fc26.noarch
libradosstriper-devel-10.2.7-2.fc26.s390x
soundtouch-1.9.2-4.fc26.s390x
libndp-1.6-2.fc26.s390x
rpm-4.13.0.2-1.fc26.s390x
rest-0.8.0-2.fc26.s390x
libvisual-0.4.0-21.fc26.s390x
python2-hawkey-0.11.1-1.fc26.s390x
fakeroot-libs-1.22-1.fc26.s390x
device-mapper-event-libs-1.02.137-6.fc26.s390x
cyrus-sasl-2.1.26-32.fc26.s390x
cronie-anacron-1.5.1-5.fc26.s390x
libpath_utils-0.2.1-34.fc26.s390x
libX11-common-1.6.5-2.fc26.noarch
libXft-2.3.2-5.fc26.s390x
gtk2-2.24.31-4.fc26.s390x
texlive-etoolbox-svn38031.2.2a-33.fc26.2.noarch
texlive-multido-svn18302.1.42-33.fc26.2.noarch
texlive-glyphlist-svn28576.0-33.fc26.2.noarch
texlive-setspace-svn24881.6.7a-33.fc26.2.noarch
texlive-mathtools-svn38833-33.fc26.2.noarch
texlive-ncntrsbk-svn31835.0-33.fc26.2.noarch
texlive-dvisvgm-def-svn41011-33.fc26.2.noarch
texlive-ifetex-svn24853.1.2-33.fc26.2.noarch
texlive-parskip-svn19963.2.0-33.fc26.2.noarch
texlive-bera-svn20031.0-33.fc26.2.noarch
texlive-pgf-svn40966-33.fc26.2.noarch
texlive-auto-pst-pdf-svn23723.0.6-33.fc26.2.noarch
texlive-ctable-svn38672-33.fc26.2.noarch
texlive-typehtml-svn17134.0-33.fc26.2.noarch
mesa-libGLES-17.2.4-2.fc26.s390x
vte291-0.48.4-1.fc26.s390x
libcephfs_jni1-10.2.7-2.fc26.s390x
bzip2-devel-1.0.6-22.fc26.s390x
expat-devel-2.2.4-1.fc26.s390x
libsepol-devel-2.6-2.fc26.s390x
glib2-static-2.52.3-2.fc26.s390x
virglrenderer-devel-0.6.0-1.20170210git76b3da97b.fc26.s390x
parted-3.2-24.fc26.s390x
python3-beautifulsoup4-4.6.0-1.fc26.noarch
python-bunch-1.0.1-10.fc26.noarch
lz4-1.8.0-1.fc26.s390x
nss-util-3.34.0-1.0.fc26.s390x
openssh-clients-7.5p1-4.fc26.s390x
chrony-3.2-1.fc26.s390x
dnf-conf-2.7.5-2.fc26.noarch
sssd-client-1.16.0-4.fc26.s390x
bodhi-client-2.12.2-3.fc26.noarch
libuv-1.11.0-1.fc26.s390x
glibc-2.25-13.fc26.s390x
libgomp-7.3.1-2.fc26.s390x
cmake-rpm-macros-3.10.1-11.fc26.noarch
gtk-update-icon-cache-3.22.21-3.fc26.s390x
pcre2-utf32-10.23-13.fc26.s390x
kernel-modules-4.15.4-200.fc26.s390x
libcurl-devel-7.53.1-14.fc26.s390x
webkitgtk4-2.18.6-1.fc26.s390x
libstdc++-static-7.3.1-2.fc26.s390x
rsync-3.1.3-2.fc26.s390x
hawkey-0.6.4-3.fc25.s390x
perl-srpm-macros-1-21.fc26.noarch
expat-2.2.4-1.fc26.s390x
chkconfig-1.10-1.fc26.s390x
findutils-4.6.0-12.fc26.s390x
mesa-libwayland-egl-17.2.4-2.fc26.s390x
procps-ng-3.3.10-13.fc26.s390x
mesa-libglapi-17.2.4-2.fc26.s390x
perl-Unicode-Normalize-1.25-366.fc26.s390x
perl-IO-Socket-IP-0.39-1.fc26.noarch
hunspell-en-US-0.20140811.1-6.fc26.noarch
libxcb-1.12-3.fc26.s390x
perl-Pod-Escapes-1.07-366.fc26.noarch
perl-Pod-Usage-1.69-2.fc26.noarch
libtheora-1.1.1-15.fc26.s390x
tcp_wrappers-7.6-85.fc26.s390x
coreutils-8.27-7.fc26.s390x
libmount-2.30.2-1.fc26.s390x
python2-iniparse-0.4-24.fc26.noarch
python2-decorator-4.0.11-2.fc26.noarch
ModemManager-glib-1.6.10-1.fc26.s390x
python3-decorator-4.0.11-2.fc26.noarch
python3-cffi-1.9.1-2.fc26.s390x
python-bugzilla-cli-2.1.0-1.fc26.noarch
python2-funcsigs-1.0.2-5.fc26.noarch
python2-babel-2.3.4-5.fc26.noarch
python-bugzilla-2.1.0-1.fc26.noarch
libradosstriper1-10.2.7-2.fc26.s390x
snappy-1.1.4-3.fc26.s390x
libmpcdec-1.2.6-17.fc26.s390x
rpm-libs-4.13.0.2-1.fc26.s390x
python-urlgrabber-3.10.1-11.fc26.noarch
sysfsutils-2.1.0-20.fc26.s390x
python3-hawkey-0.11.1-1.fc26.s390x
ethtool-4.13-1.fc26.s390x
iputils-20161105-5.fc26.s390x
plymouth-scripts-0.9.3-0.7.20160620git0e65b86c.fc26.s390x
cronie-1.5.1-5.fc26.s390x
libini_config-1.3.1-34.fc26.s390x
libX11-1.6.5-2.fc26.s390x
libglvnd-egl-1.0.0-1.fc26.s390x
texlive-kpathsea-svn41139-33.fc26.2.noarch
texlive-thumbpdf-bin-svn6898.0-33.20160520.fc26.2.noarch
texlive-subfig-svn15878.1.3-33.fc26.2.noarch
texlive-gsftopk-bin-svn40473-33.20160520.fc26.2.s390x
texlive-tex-ini-files-svn40533-33.fc26.2.noarch
texlive-qstest-svn15878.0-33.fc26.2.noarch
texlive-palatino-svn31835.0-33.fc26.2.noarch
texlive-ec-svn25033.1.0-33.fc26.2.noarch
texlive-iftex-svn29654.0.2-33.fc26.2.noarch
texlive-pslatex-svn16416.0-33.fc26.2.noarch
texlive-algorithms-svn38085.0.1-33.fc26.2.noarch
texlive-filehook-svn24280.0.5d-33.fc26.2.noarch
texlive-pst-node-svn40743-33.fc26.2.noarch
texlive-rotating-svn16832.2.16b-33.fc26.2.noarch
texlive-seminar-svn34011.1.62-33.fc26.2.noarch
libuuid-devel-2.30.2-1.fc26.s390x
libXinerama-devel-1.1.3-7.fc26.s390x
emacs-common-25.3-3.fc26.s390x
fedora-packager-0.6.0.1-2.fc26.noarch
snappy-devel-1.1.4-3.fc26.s390x
authconfig-7.0.1-2.fc26.s390x
newt-python3-0.52.20-1.fc26.s390x
python-decoratortools-1.8-13.fc26.noarch
python-systemd-doc-234-1.fc26.s390x
openssl-libs-1.1.0g-1.fc26.s390x
git-core-2.13.6-2.fc26.s390x
libsss_certmap-1.16.0-4.fc26.s390x
lsof-4.89-5.fc26.s390x
glibc-all-langpacks-2.25-13.fc26.s390x
audit-libs-2.8.2-1.fc26.s390x
python3-3.6.4-2.fc26.s390x
gcc-7.3.1-2.fc26.s390x
pcre2-utf16-10.23-13.fc26.s390x
kernel-core-4.15.4-200.fc26.s390x
pcre-static-8.41-5.fc26.s390x
dracut-config-rescue-046-8.git20180105.fc26.s390x
webkitgtk4-plugin-process-gtk2-2.18.6-1.fc26.s390x
perl-Time-HiRes-1.9753-1.fc26.s390x
haveged-1.9.1-6.fc26.s390x
gpg-pubkey-a0a7badb-52844296
gpg-pubkey-e372e838-56fd7943
gpg-pubkey-3b921d09-57a87096
google-roboto-slab-fonts-1.100263-0.5.20150923git.fc26.noarch
libreport-filesystem-2.9.1-3.fc26.s390x
libcom_err-1.43.4-2.fc26.s390x
libffi-3.1-12.fc26.s390x
keyutils-libs-1.5.10-1.fc26.s390x
diffutils-3.5-3.fc26.s390x
apr-util-1.5.4-6.fc26.s390x
bluez-libs-5.46-6.fc26.s390x
libksba-1.3.5-3.fc26.s390x
ncurses-6.0-8.20170212.fc26.s390x
gsm-1.0.17-1.fc26.s390x
libteam-1.27-1.fc26.s390x
perl-Fedora-VSP-0.001-5.fc26.noarch
libusb-0.1.5-8.fc26.s390x
acl-2.2.52-15.fc26.s390x
dwz-0.12-3.fc26.s390x
libblkid-2.30.2-1.fc26.s390x
polkit-libs-0.113-8.fc26.s390x
dbus-python-1.2.4-6.fc26.s390x
gts-0.7.6-30.20121130.fc26.s390x
libfdisk-2.30.2-1.fc26.s390x
python3-pycparser-2.14-10.fc26.noarch
python3-bugzilla-2.1.0-1.fc26.noarch
python2-docutils-0.13.1-4.fc26.noarch
pytz-2016.10-4.fc26.noarch
python2-requests-2.13.0-1.fc26.noarch
libcephfs-devel-10.2.7-2.fc26.s390x
ncurses-c++-libs-6.0-8.20170212.fc26.s390x
GeoIP-1.6.11-1.fc26.s390x
liblockfile-1.09-5.fc26.s390x
rpm-plugin-selinux-4.13.0.2-1.fc26.s390x
systemtap-devel-3.2-2.fc26.s390x
libsysfs-2.1.0-20.fc26.s390x
libdnf-0.11.1-1.fc26.s390x
mesa-libgbm-17.2.4-2.fc26.s390x
lvm2-libs-2.02.168-6.fc26.s390x
libXfixes-5.0.3-2.fc26.s390x
brlapi-0.6.6-5.fc26.s390x
texlive-metafont-svn40793-33.fc26.2.noarch
texlive-graphics-cfg-svn40269-33.fc26.2.noarch
texlive-mptopdf-svn41282-33.fc26.2.noarch
texlive-makeindex-bin-svn40473-33.20160520.fc26.2.s390x
texlive-texlive-scripts-bin-svn29741.0-33.20160520.fc26.2.noarch
texlive-sauerj-svn15878.0-33.fc26.2.noarch
texlive-txfonts-svn15878.0-33.fc26.2.noarch
texlive-filecontents-svn24250.1.3-33.fc26.2.noarch
texlive-lualibs-svn40370-33.fc26.2.noarch
texlive-section-svn20180.0-33.fc26.2.noarch
texlive-ucharcat-svn38907-33.fc26.2.noarch
texlive-hyperref-svn41396-33.fc26.2.noarch
texlive-pst-3d-svn17257.1.10-33.fc26.2.noarch
texlive-oberdiek-svn41346-33.fc26.2.noarch
texlive-ae-svn15878.1.4-33.fc26.2.noarch
texlive-collection-basic-svn41149-33.20160520.fc26.2.noarch
gnat-srpm-macros-4-2.fc26.noarch
glib2-devel-2.52.3-2.fc26.s390x
netpbm-progs-10.80.00-2.fc26.s390x
libXxf86vm-devel-1.1.4-4.fc26.s390x
nettle-devel-3.3-2.fc26.s390x
cairo-gobject-devel-1.14.10-1.fc26.s390x
fedora-rpm-macros-26-2.fc26.noarch
elfutils-devel-0.169-1.fc26.s390x
libidn-devel-1.33-2.fc26.s390x
s390utils-1.36.1-3.fc26.s390x
libtool-2.4.6-17.fc26.s390x
python3-cssselect-0.9.2-4.fc26.noarch
python2-cssselect-0.9.2-4.fc26.noarch
bison-3.0.4-6.fc26.s390x
rootfiles-8.1-20.fc26.noarch
git-core-doc-2.13.6-2.fc26.s390x
boost-system-1.63.0-10.fc26.s390x
gnutls-dane-3.5.16-4.fc26.s390x
python3-urllib3-1.20-2.fc26.noarch
libsss_autofs-1.16.0-4.fc26.s390x
libgcc-7.3.1-2.fc26.s390x
system-python-libs-3.6.4-2.fc26.s390x
pcre-cpp-8.41-5.fc26.s390x
python3-distro-1.2.0-1.fc26.noarch
libnfsidmap-2.2.1-4.rc2.fc26.s390x
selinux-policy-3.13.1-260.18.fc26.noarch
glusterfs-devel-3.10.10-1.fc26.s390x
kernel-4.15.4-200.fc26.s390x
glibc-static-2.25-13.fc26.s390x
xapian-core-libs-1.4.5-1.fc26.s390x
publicsuffix-list-dafsa-20171228-1.fc26.noarch
=== TEST BEGIN ===
Using CC: /home/fam/bin/cc
Install prefix /var/tmp/patchew-tester-tmp-erqpie2w/src/install
BIOS directory /var/tmp/patchew-tester-tmp-erqpie2w/src/install/share/qemu
firmware path /var/tmp/patchew-tester-tmp-erqpie2w/src/install/share/qemu-firmware
binary directory /var/tmp/patchew-tester-tmp-erqpie2w/src/install/bin
library directory /var/tmp/patchew-tester-tmp-erqpie2w/src/install/lib
module directory /var/tmp/patchew-tester-tmp-erqpie2w/src/install/lib/qemu
libexec directory /var/tmp/patchew-tester-tmp-erqpie2w/src/install/libexec
include directory /var/tmp/patchew-tester-tmp-erqpie2w/src/install/include
config directory /var/tmp/patchew-tester-tmp-erqpie2w/src/install/etc
local state directory /var/tmp/patchew-tester-tmp-erqpie2w/src/install/var
Manual directory /var/tmp/patchew-tester-tmp-erqpie2w/src/install/share/man
ELF interp prefix /usr/gnemul/qemu-%M
Source path /var/tmp/patchew-tester-tmp-erqpie2w/src
GIT binary git
GIT submodules ui/keycodemapdb capstone
C compiler /home/fam/bin/cc
Host C compiler cc
C++ compiler c++
Objective-C compiler /home/fam/bin/cc
ARFLAGS rv
CFLAGS -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -g
QEMU_CFLAGS -I/usr/include/pixman-1 -Werror -DHAS_LIBSSH2_SFTP_FSYNC -pthread -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -m64 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wexpansion-to-defined -Wendif-labels -Wno-shift-negative-value -Wno-missing-include-dirs -Wempty-body -Wnested-externs -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wold-style-declaration -Wold-style-definition -Wtype-limits -fstack-protector-strong -I/usr/include/p11-kit-1 -I/usr/include/libpng16 -I/usr/include/libdrm -I$(SRC_PATH)/capstone/include
LDFLAGS -Wl,--warn-common -m64 -g
make make
install install
python python -B
smbd /usr/sbin/smbd
module support no
host CPU s390x
host big endian yes
target list aarch64-softmmu alpha-softmmu arm-softmmu cris-softmmu hppa-softmmu i386-softmmu lm32-softmmu m68k-softmmu microblazeel-softmmu microblaze-softmmu mips64el-softmmu mips64-softmmu mipsel-softmmu mips-softmmu moxie-softmmu nios2-softmmu or1k-softmmu ppc64-softmmu ppcemb-softmmu ppc-softmmu riscv32-softmmu riscv64-softmmu s390x-softmmu sh4eb-softmmu sh4-softmmu sparc64-softmmu sparc-softmmu tricore-softmmu unicore32-softmmu x86_64-softmmu xtensaeb-softmmu xtensa-softmmu aarch64_be-linux-user aarch64-linux-user alpha-linux-user armeb-linux-user arm-linux-user cris-linux-user hppa-linux-user i386-linux-user m68k-linux-user microblazeel-linux-user microblaze-linux-user mips64el-linux-user mips64-linux-user mipsel-linux-user mips-linux-user mipsn32el-linux-user mipsn32-linux-user nios2-linux-user or1k-linux-user ppc64abi32-linux-user ppc64le-linux-user ppc64-linux-user ppc-linux-user riscv32-linux-user riscv64-linux-user s390x-linux-user sh4eb-linux-user sh4-linux-user sparc32plus-linux-user sparc64-linux-user sparc-linux-user tilegx-linux-user x86_64-linux-user
gprof enabled no
sparse enabled no
strip binaries yes
profiler no
static build no
SDL support yes (2.0.7)
GTK support yes (3.22.21)
GTK GL support yes
VTE support yes (0.48.4)
TLS priority NORMAL
GNUTLS support yes
GNUTLS rnd yes
libgcrypt no
libgcrypt kdf no
nettle yes (3.3)
nettle kdf yes
libtasn1 yes
curses support yes
virgl support yes
curl support yes
mingw32 support no
Audio drivers oss
Block whitelist (rw)
Block whitelist (ro)
VirtFS support yes
Multipath support no
VNC support yes
VNC SASL support yes
VNC JPEG support yes
VNC PNG support yes
xen support no
brlapi support yes
bluez support yes
Documentation yes
PIE no
vde support no
netmap support no
Linux AIO support yes
ATTR/XATTR support yes
Install blobs yes
KVM support yes
HAX support no
HVF support no
WHPX support no
TCG support yes
TCG debug enabled no
TCG interpreter no
malloc trim support yes
RDMA support no
fdt support yes
preadv support yes
fdatasync yes
madvise yes
posix_madvise yes
posix_memalign yes
libcap-ng support yes
vhost-net support yes
vhost-crypto support yes
vhost-scsi support yes
vhost-vsock support yes
vhost-user support yes
Trace backends log
spice support no
rbd support yes
xfsctl support no
smartcard support yes
libusb yes
usb net redir yes
OpenGL support yes
OpenGL dmabufs yes
libiscsi support yes
libnfs support yes
build guest agent yes
QGA VSS support no
QGA w32 disk info no
QGA MSI support no
seccomp support yes
coroutine backend ucontext
coroutine pool yes
debug stack usage no
crypto afalg no
GlusterFS support yes
gcov gcov
gcov enabled no
TPM support yes
libssh2 support yes
TPM passthrough no
TPM emulator yes
QOM debugging yes
Live block migration yes
lzo support yes
snappy support yes
bzip2 support yes
NUMA host support no
libxml2 yes
tcmalloc support no
jemalloc support no
avx2 optimization no
replication support yes
VxHS block device no
capstone git
GEN aarch64-softmmu/config-devices.mak.tmp
GEN alpha-softmmu/config-devices.mak.tmp
GEN arm-softmmu/config-devices.mak.tmp
GEN cris-softmmu/config-devices.mak.tmp
GEN cris-softmmu/config-devices.mak
GEN hppa-softmmu/config-devices.mak.tmp
GEN arm-softmmu/config-devices.mak
GEN alpha-softmmu/config-devices.mak
GEN i386-softmmu/config-devices.mak.tmp
GEN lm32-softmmu/config-devices.mak.tmp
GEN aarch64-softmmu/config-devices.mak
GEN m68k-softmmu/config-devices.mak.tmp
GEN lm32-softmmu/config-devices.mak
GEN hppa-softmmu/config-devices.mak
GEN microblazeel-softmmu/config-devices.mak.tmp
GEN microblaze-softmmu/config-devices.mak.tmp
GEN m68k-softmmu/config-devices.mak
GEN i386-softmmu/config-devices.mak
GEN mips64el-softmmu/config-devices.mak.tmp
GEN mips64-softmmu/config-devices.mak.tmp
GEN microblaze-softmmu/config-devices.mak
GEN mipsel-softmmu/config-devices.mak.tmp
GEN microblazeel-softmmu/config-devices.mak
GEN mips-softmmu/config-devices.mak.tmp
GEN mips64el-softmmu/config-devices.mak
GEN mips64-softmmu/config-devices.mak
GEN moxie-softmmu/config-devices.mak.tmp
GEN nios2-softmmu/config-devices.mak.tmp
GEN mipsel-softmmu/config-devices.mak
GEN mips-softmmu/config-devices.mak
GEN or1k-softmmu/config-devices.mak.tmp
GEN moxie-softmmu/config-devices.mak
GEN ppc64-softmmu/config-devices.mak.tmp
GEN nios2-softmmu/config-devices.mak
GEN ppcemb-softmmu/config-devices.mak.tmp
GEN ppc-softmmu/config-devices.mak.tmp
GEN or1k-softmmu/config-devices.mak
GEN riscv32-softmmu/config-devices.mak.tmp
GEN ppcemb-softmmu/config-devices.mak
GEN ppc64-softmmu/config-devices.mak
GEN riscv64-softmmu/config-devices.mak.tmp
GEN s390x-softmmu/config-devices.mak.tmp
GEN riscv32-softmmu/config-devices.mak
GEN ppc-softmmu/config-devices.mak
GEN sh4eb-softmmu/config-devices.mak.tmp
GEN sh4-softmmu/config-devices.mak.tmp
GEN riscv64-softmmu/config-devices.mak
GEN s390x-softmmu/config-devices.mak
GEN sparc64-softmmu/config-devices.mak.tmp
GEN sparc-softmmu/config-devices.mak.tmp
GEN sh4eb-softmmu/config-devices.mak
GEN sh4-softmmu/config-devices.mak
GEN tricore-softmmu/config-devices.mak.tmp
GEN sparc-softmmu/config-devices.mak
GEN unicore32-softmmu/config-devices.mak.tmp
GEN x86_64-softmmu/config-devices.mak.tmp
GEN sparc64-softmmu/config-devices.mak
GEN tricore-softmmu/config-devices.mak
GEN xtensaeb-softmmu/config-devices.mak.tmp
GEN xtensa-softmmu/config-devices.mak.tmp
GEN unicore32-softmmu/config-devices.mak
GEN aarch64_be-linux-user/config-devices.mak.tmp
GEN xtensaeb-softmmu/config-devices.mak
GEN xtensa-softmmu/config-devices.mak
GEN aarch64-linux-user/config-devices.mak.tmp
GEN aarch64_be-linux-user/config-devices.mak
GEN alpha-linux-user/config-devices.mak.tmp
GEN x86_64-softmmu/config-devices.mak
GEN armeb-linux-user/config-devices.mak.tmp
GEN arm-linux-user/config-devices.mak.tmp
GEN aarch64-linux-user/config-devices.mak
GEN armeb-linux-user/config-devices.mak
GEN alpha-linux-user/config-devices.mak
GEN cris-linux-user/config-devices.mak.tmp
GEN hppa-linux-user/config-devices.mak.tmp
GEN i386-linux-user/config-devices.mak.tmp
GEN arm-linux-user/config-devices.mak
GEN m68k-linux-user/config-devices.mak.tmp
GEN cris-linux-user/config-devices.mak
GEN hppa-linux-user/config-devices.mak
GEN i386-linux-user/config-devices.mak
GEN microblazeel-linux-user/config-devices.mak.tmp
GEN microblaze-linux-user/config-devices.mak.tmp
GEN m68k-linux-user/config-devices.mak
GEN mips64el-linux-user/config-devices.mak.tmp
GEN mips64-linux-user/config-devices.mak.tmp
GEN microblaze-linux-user/config-devices.mak
GEN microblazeel-linux-user/config-devices.mak
GEN mipsel-linux-user/config-devices.mak.tmp
GEN mips-linux-user/config-devices.mak.tmp
GEN mips64el-linux-user/config-devices.mak
GEN mipsn32el-linux-user/config-devices.mak.tmp
GEN mips64-linux-user/config-devices.mak
GEN mips-linux-user/config-devices.mak
GEN mipsel-linux-user/config-devices.mak
GEN mipsn32-linux-user/config-devices.mak.tmp
GEN nios2-linux-user/config-devices.mak.tmp
GEN or1k-linux-user/config-devices.mak.tmp
GEN mipsn32el-linux-user/config-devices.mak
GEN ppc64abi32-linux-user/config-devices.mak.tmp
GEN mipsn32-linux-user/config-devices.mak
GEN nios2-linux-user/config-devices.mak
GEN or1k-linux-user/config-devices.mak
GEN ppc64le-linux-user/config-devices.mak.tmp
GEN ppc64-linux-user/config-devices.mak.tmp
GEN ppc64abi32-linux-user/config-devices.mak
GEN ppc-linux-user/config-devices.mak.tmp
GEN riscv32-linux-user/config-devices.mak.tmp
GEN ppc64le-linux-user/config-devices.mak
GEN ppc64-linux-user/config-devices.mak
GEN riscv64-linux-user/config-devices.mak.tmp
GEN s390x-linux-user/config-devices.mak.tmp
GEN riscv32-linux-user/config-devices.mak
GEN ppc-linux-user/config-devices.mak
GEN sh4eb-linux-user/config-devices.mak.tmp
GEN riscv64-linux-user/config-devices.mak
GEN sh4-linux-user/config-devices.mak.tmp
GEN s390x-linux-user/config-devices.mak
GEN sparc32plus-linux-user/config-devices.mak.tmp
GEN sparc64-linux-user/config-devices.mak.tmp
GEN sh4-linux-user/config-devices.mak
GEN sh4eb-linux-user/config-devices.mak
GEN sparc-linux-user/config-devices.mak.tmp
GEN sparc32plus-linux-user/config-devices.mak
GEN sparc64-linux-user/config-devices.mak
GEN tilegx-linux-user/config-devices.mak.tmp
GEN x86_64-linux-user/config-devices.mak.tmp
GEN sparc-linux-user/config-devices.mak
GEN config-host.h
GEN tilegx-linux-user/config-devices.mak
GEN x86_64-linux-user/config-devices.mak
GIT ui/keycodemapdb capstone
GEN qemu-options.def
GEN qapi-gen
GEN trace/generated-tcg-tracers.h
GEN trace/generated-helpers-wrappers.h
GEN trace/generated-helpers.h
GEN trace/generated-helpers.c
GEN module_block.h
GEN tests/test-qapi-gen
GEN trace-root.h
GEN util/trace.h
GEN crypto/trace.h
GEN io/trace.h
GEN migration/trace.h
GEN block/trace.h
GEN chardev/trace.h
GEN hw/block/trace.h
GEN hw/block/dataplane/trace.h
GEN hw/char/trace.h
GEN hw/intc/trace.h
GEN hw/net/trace.h
Submodule 'capstone' (git://git.qemu.org/capstone.git) registered for path 'capstone'
GEN hw/rdma/trace.h
Submodule 'ui/keycodemapdb' (git://git.qemu.org/keycodemapdb.git) registered for path 'ui/keycodemapdb'
Cloning into '/var/tmp/patchew-tester-tmp-erqpie2w/src/capstone'...
GEN hw/rdma/vmw/trace.h
GEN hw/virtio/trace.h
GEN hw/audio/trace.h
GEN hw/misc/trace.h
GEN hw/misc/macio/trace.h
GEN hw/usb/trace.h
GEN hw/scsi/trace.h
GEN hw/nvram/trace.h
GEN hw/display/trace.h
GEN hw/input/trace.h
GEN hw/timer/trace.h
GEN hw/dma/trace.h
GEN hw/sparc/trace.h
GEN hw/sparc64/trace.h
GEN hw/sd/trace.h
GEN hw/isa/trace.h
GEN hw/mem/trace.h
GEN hw/i386/trace.h
GEN hw/i386/xen/trace.h
GEN hw/9pfs/trace.h
GEN hw/ppc/trace.h
GEN hw/pci/trace.h
GEN hw/pci-host/trace.h
GEN hw/s390x/trace.h
GEN hw/vfio/trace.h
GEN hw/acpi/trace.h
GEN hw/arm/trace.h
GEN hw/alpha/trace.h
GEN hw/hppa/trace.h
GEN hw/xen/trace.h
GEN hw/ide/trace.h
GEN hw/tpm/trace.h
GEN ui/trace.h
GEN audio/trace.h
GEN net/trace.h
GEN target/arm/trace.h
GEN target/i386/trace.h
GEN target/mips/trace.h
GEN target/sparc/trace.h
GEN target/s390x/trace.h
GEN target/ppc/trace.h
GEN qom/trace.h
GEN linux-user/trace.h
GEN qapi/trace.h
GEN accel/tcg/trace.h
GEN accel/kvm/trace.h
GEN nbd/trace.h
GEN scsi/trace.h
GEN trace-root.c
GEN util/trace.c
GEN crypto/trace.c
GEN io/trace.c
GEN migration/trace.c
GEN block/trace.c
GEN chardev/trace.c
GEN hw/block/trace.c
GEN hw/block/dataplane/trace.c
GEN hw/char/trace.c
GEN hw/intc/trace.c
GEN hw/net/trace.c
GEN hw/rdma/trace.c
GEN hw/rdma/vmw/trace.c
GEN hw/virtio/trace.c
GEN hw/audio/trace.c
GEN hw/misc/trace.c
GEN hw/misc/macio/trace.c
GEN hw/usb/trace.c
GEN hw/scsi/trace.c
GEN hw/nvram/trace.c
GEN hw/display/trace.c
GEN hw/input/trace.c
GEN hw/timer/trace.c
GEN hw/dma/trace.c
GEN hw/sparc/trace.c
GEN hw/sparc64/trace.c
GEN hw/sd/trace.c
GEN hw/isa/trace.c
GEN hw/mem/trace.c
GEN hw/i386/trace.c
GEN hw/i386/xen/trace.c
GEN hw/9pfs/trace.c
GEN hw/ppc/trace.c
GEN hw/pci/trace.c
GEN hw/pci-host/trace.c
GEN hw/s390x/trace.c
GEN hw/vfio/trace.c
GEN hw/acpi/trace.c
GEN hw/arm/trace.c
GEN hw/alpha/trace.c
GEN hw/hppa/trace.c
GEN hw/xen/trace.c
GEN hw/ide/trace.c
GEN hw/tpm/trace.c
GEN ui/trace.c
GEN audio/trace.c
GEN net/trace.c
GEN target/arm/trace.c
GEN target/i386/trace.c
GEN target/mips/trace.c
GEN target/sparc/trace.c
GEN target/s390x/trace.c
GEN target/ppc/trace.c
GEN qom/trace.c
GEN linux-user/trace.c
GEN qapi/trace.c
GEN accel/tcg/trace.c
GEN accel/kvm/trace.c
GEN nbd/trace.c
GEN scsi/trace.c
GEN config-all-devices.mak
Cloning into '/var/tmp/patchew-tester-tmp-erqpie2w/src/ui/keycodemapdb'...
GEN ui/input-keymap-atset1-to-qcode.c
GEN ui/input-keymap-linux-to-qcode.c
GEN ui/input-keymap-qcode-to-atset1.c
GEN ui/input-keymap-qcode-to-atset2.c
GEN ui/input-keymap-qcode-to-atset3.c
GEN ui/input-keymap-qcode-to-linux.c
CC cs.o
CC utils.o
CC SStream.o
CC MCInstrDesc.o
CC MCRegisterInfo.o
GEN ui/input-keymap-qcode-to-qnum.c
GEN ui/input-keymap-qcode-to-sun.c
CC arch/ARM/ARMDisassembler.o
CC arch/ARM/ARMInstPrinter.o
GEN ui/input-keymap-qnum-to-qcode.c
GEN ui/input-keymap-usb-to-qcode.c
GEN ui/input-keymap-win32-to-qcode.c
CC arch/ARM/ARMMapping.o
GEN ui/input-keymap-x11-to-qcode.c
GEN ui/input-keymap-xorgevdev-to-qcode.c
GEN ui/input-keymap-xorgkbd-to-qcode.c
GEN ui/input-keymap-xorgxquartz-to-qcode.c
GEN ui/input-keymap-xorgxwin-to-qcode.c
CC arch/ARM/ARMModule.o
CC arch/AArch64/AArch64BaseInfo.o
CC arch/AArch64/AArch64Disassembler.o
CC arch/AArch64/AArch64InstPrinter.o
CC arch/AArch64/AArch64Mapping.o
CC arch/AArch64/AArch64Module.o
CC arch/Mips/MipsDisassembler.o
CC arch/Mips/MipsInstPrinter.o
CC arch/Mips/MipsMapping.o
CC arch/Mips/MipsModule.o
CC arch/PowerPC/PPCDisassembler.o
CC arch/PowerPC/PPCInstPrinter.o
CC arch/PowerPC/PPCMapping.o
CC arch/PowerPC/PPCModule.o
CC arch/Sparc/SparcDisassembler.o
CC arch/Sparc/SparcInstPrinter.o
CC arch/Sparc/SparcMapping.o
CC arch/Sparc/SparcModule.o
CC arch/SystemZ/SystemZDisassembler.o
CC arch/SystemZ/SystemZInstPrinter.o
CC arch/SystemZ/SystemZMapping.o
CC arch/SystemZ/SystemZModule.o
CC arch/SystemZ/SystemZMCTargetDesc.o
CC arch/X86/X86DisassemblerDecoder.o
CC arch/X86/X86Disassembler.o
CC arch/X86/X86IntelInstPrinter.o
CC arch/X86/X86ATTInstPrinter.o
CC arch/X86/X86Mapping.o
CC arch/X86/X86Module.o
CC arch/XCore/XCoreDisassembler.o
CC arch/XCore/XCoreInstPrinter.o
CC arch/XCore/XCoreMapping.o
CC arch/XCore/XCoreModule.o
CC MCInst.o
AR libcapstone.a
ar: creating /var/tmp/patchew-tester-tmp-erqpie2w/src/build/capstone/libcapstone.a
GEN docs/version.texi
GEN qemu-options.texi
CC tests/qemu-iotests/socket_scm_helper.o
GEN qemu-monitor.texi
GEN qemu-img-cmds.texi
GEN qemu-monitor-info.texi
GEN qemu-img.1
GEN qemu-nbd.8
GEN qemu-ga.8
GEN qga/qapi-generated/qapi-gen
GEN docs/qemu-block-drivers.7
GEN fsdev/virtfs-proxy-helper.1
CC qapi/qapi-builtin-types.o
CC qapi/qapi-types.o
CC qapi/qapi-types-block-core.o
CC qapi/qapi-types-block.o
CC qapi/qapi-types-char.o
CC qapi/qapi-types-common.o
CC qapi/qapi-types-crypto.o
CC qapi/qapi-types-introspect.o
CC qapi/qapi-types-migration.o
CC qapi/qapi-types-misc.o
CC qapi/qapi-types-net.o
CC qapi/qapi-types-rocker.o
CC qapi/qapi-types-run-state.o
CC qapi/qapi-types-sockets.o
CC qapi/qapi-types-tpm.o
CC qapi/qapi-types-trace.o
CC qapi/qapi-types-transaction.o
CC qapi/qapi-types-ui.o
CC qapi/qapi-builtin-visit.o
CC qapi/qapi-visit.o
CC qapi/qapi-visit-block-core.o
CC qapi/qapi-visit-block.o
CC qapi/qapi-visit-char.o
CC qapi/qapi-visit-common.o
CC qapi/qapi-visit-crypto.o
CC qapi/qapi-visit-introspect.o
CC qapi/qapi-visit-migration.o
CC qapi/qapi-visit-misc.o
CC qapi/qapi-visit-net.o
CC qapi/qapi-visit-rocker.o
CC qapi/qapi-visit-run-state.o
CC qapi/qapi-visit-sockets.o
CC qapi/qapi-visit-tpm.o
CC qapi/qapi-visit-trace.o
CC qapi/qapi-visit-transaction.o
CC qapi/qapi-visit-ui.o
CC qapi/qapi-events.o
CC qapi/qapi-events-block-core.o
CC qapi/qapi-events-block.o
CC qapi/qapi-events-char.o
CC qapi/qapi-events-common.o
CC qapi/qapi-events-crypto.o
CC qapi/qapi-events-introspect.o
CC qapi/qapi-events-migration.o
CC qapi/qapi-events-misc.o
CC qapi/qapi-events-net.o
CC qapi/qapi-events-rocker.o
CC qapi/qapi-events-run-state.o
CC qapi/qapi-events-sockets.o
CC qapi/qapi-events-tpm.o
CC qapi/qapi-events-trace.o
CC qapi/qapi-events-transaction.o
CC qapi/qapi-events-ui.o
CC qapi/qapi-introspect.o
CC qapi/qapi-visit-core.o
CC qapi/qapi-dealloc-visitor.o
CC qapi/qobject-input-visitor.o
CC qapi/qobject-output-visitor.o
CC qapi/qmp-registry.o
CC qapi/qmp-dispatch.o
CC qapi/string-input-visitor.o
CC qapi/string-output-visitor.o
CC qapi/opts-visitor.o
CC qapi/qapi-clone-visitor.o
CC qapi/qmp-event.o
CC qapi/qapi-util.o
CC qobject/qnull.o
CC qobject/qnum.o
CC qobject/qstring.o
CC qobject/qdict.o
CC qobject/qlist.o
CC qobject/qbool.o
CC qobject/qlit.o
CC qobject/qjson.o
CC qobject/qobject.o
CC qobject/json-lexer.o
CC qobject/json-streamer.o
CC qobject/json-parser.o
CC trace/control.o
CC trace/qmp.o
CC util/osdep.o
CC util/cutils.o
CC util/unicode.o
CC util/qemu-timer-common.o
CC util/bufferiszero.o
CC util/lockcnt.o
CC util/aiocb.o
CC util/async.o
CC util/aio-wait.o
CC util/thread-pool.o
CC util/qemu-timer.o
CC util/main-loop.o
CC util/iohandler.o
CC util/aio-posix.o
CC util/compatfd.o
CC util/event_notifier-posix.o
CC util/mmap-alloc.o
CC util/oslib-posix.o
CC util/qemu-openpty.o
CC util/qemu-thread-posix.o
CC util/memfd.o
CC util/envlist.o
CC util/path.o
CC util/module.o
CC util/host-utils.o
CC util/bitmap.o
CC util/bitops.o
CC util/hbitmap.o
CC util/fifo8.o
CC util/acl.o
CC util/cacheinfo.o
CC util/error.o
CC util/qemu-error.o
CC util/id.o
CC util/iov.o
CC util/qemu-config.o
CC util/qemu-sockets.o
CC util/uri.o
CC util/notify.o
CC util/qemu-option.o
CC util/qemu-progress.o
CC util/keyval.o
CC util/hexdump.o
CC util/crc32c.o
CC util/uuid.o
CC util/throttle.o
CC util/getauxval.o
CC util/readline.o
CC util/rcu.o
CC util/qemu-coroutine.o
CC util/qemu-coroutine-lock.o
CC util/qemu-coroutine-io.o
CC util/qemu-coroutine-sleep.o
CC util/coroutine-ucontext.o
CC util/buffer.o
CC util/timed-average.o
CC util/base64.o
CC util/log.o
CC util/pagesize.o
CC util/qdist.o
CC util/qht.o
CC util/range.o
CC util/stats64.o
CC util/systemd.o
CC util/vfio-helpers.o
CC trace-root.o
CC util/trace.o
CC crypto/trace.o
CC io/trace.o
CC migration/trace.o
CC block/trace.o
CC chardev/trace.o
CC hw/block/trace.o
CC hw/block/dataplane/trace.o
CC hw/char/trace.o
CC hw/intc/trace.o
CC hw/net/trace.o
CC hw/rdma/trace.o
CC hw/rdma/vmw/trace.o
CC hw/virtio/trace.o
CC hw/audio/trace.o
CC hw/misc/trace.o
CC hw/misc/macio/trace.o
CC hw/usb/trace.o
CC hw/scsi/trace.o
CC hw/nvram/trace.o
CC hw/display/trace.o
CC hw/input/trace.o
CC hw/timer/trace.o
CC hw/dma/trace.o
CC hw/sparc/trace.o
CC hw/sparc64/trace.o
CC hw/sd/trace.o
CC hw/isa/trace.o
CC hw/mem/trace.o
CC hw/i386/trace.o
CC hw/i386/xen/trace.o
CC hw/9pfs/trace.o
CC hw/ppc/trace.o
CC hw/pci/trace.o
CC hw/pci-host/trace.o
CC hw/s390x/trace.o
CC hw/vfio/trace.o
CC hw/acpi/trace.o
CC hw/arm/trace.o
CC hw/alpha/trace.o
CC hw/hppa/trace.o
CC hw/xen/trace.o
CC hw/ide/trace.o
CC hw/tpm/trace.o
CC ui/trace.o
CC audio/trace.o
CC net/trace.o
CC target/arm/trace.o
CC target/i386/trace.o
CC target/mips/trace.o
CC target/sparc/trace.o
CC target/s390x/trace.o
CC target/ppc/trace.o
CC qom/trace.o
CC linux-user/trace.o
CC qapi/trace.o
CC accel/tcg/trace.o
CC accel/kvm/trace.o
CC nbd/trace.o
CC scsi/trace.o
CC crypto/pbkdf-stub.o
CC stubs/arch-query-cpu-def.o
CC stubs/arch-query-cpu-model-expansion.o
CC stubs/arch-query-cpu-model-comparison.o
CC stubs/arch-query-cpu-model-baseline.o
CC stubs/bdrv-next-monitor-owned.o
CC stubs/blk-commit-all.o
CC stubs/blockdev-close-all-bdrv-states.o
CC stubs/clock-warp.o
CC stubs/cpu-get-clock.o
CC stubs/cpu-get-icount.o
CC stubs/dump.o
CC stubs/error-printf.o
CC stubs/fdset.o
CC stubs/gdbstub.o
CC stubs/get-vm-name.o
CC stubs/iothread.o
CC stubs/iothread-lock.o
CC stubs/is-daemonized.o
CC stubs/linux-aio.o
CC stubs/machine-init-done.o
CC stubs/migr-blocker.o
CC stubs/change-state-handler.o
CC stubs/monitor.o
CC stubs/notify-event.o
CC stubs/qtest.o
CC stubs/replay.o
CC stubs/runstate-check.o
CC stubs/set-fd-handler.o
CC stubs/slirp.o
CC stubs/sysbus.o
CC stubs/tpm.o
CC stubs/trace-control.o
CC stubs/uuid.o
CC stubs/vm-stop.o
CC stubs/vmstate.o
CC stubs/qmp_pc_dimm.o
CC stubs/target-monitor-defs.o
CC stubs/target-get-monitor-def.o
CC stubs/pc_madt_cpu_entry.o
CC stubs/vmgenid.o
CC stubs/xen-common.o
CC stubs/xen-hvm.o
CC stubs/pci-host-piix.o
CC stubs/ram-block.o
CC qemu-keymap.o
CC ui/input-keymap.o
CC contrib/ivshmem-client/ivshmem-client.o
CC contrib/ivshmem-client/main.o
CC contrib/ivshmem-server/ivshmem-server.o
CC contrib/ivshmem-server/main.o
CC qemu-nbd.o
CC block.o
CC blockjob.o
CC qemu-io-cmds.o
CC replication.o
CC block/raw-format.o
CC block/qcow.o
CC block/vdi.o
CC block/vmdk.o
CC block/cloop.o
CC block/bochs.o
CC block/vpc.o
CC block/vvfat.o
CC block/dmg.o
CC block/qcow2.o
CC block/qcow2-refcount.o
CC block/qcow2-cluster.o
CC block/qcow2-snapshot.o
CC block/qcow2-cache.o
CC block/qcow2-bitmap.o
CC block/qed.o
CC block/qed-l2-cache.o
CC block/qed-table.o
CC block/qed-cluster.o
CC block/qed-check.o
CC block/vhdx.o
CC block/vhdx-endian.o
CC block/vhdx-log.o
CC block/quorum.o
CC block/parallels.o
CC block/blkdebug.o
CC block/blkverify.o
CC block/blkreplay.o
CC block/block-backend.o
CC block/snapshot.o
CC block/qapi.o
CC block/file-posix.o
CC block/linux-aio.o
CC block/null.o
CC block/mirror.o
CC block/commit.o
CC block/io.o
CC block/throttle-groups.o
CC block/nvme.o
CC block/nbd.o
CC block/nbd-client.o
CC block/sheepdog.o
/var/tmp/patchew-tester-tmp-erqpie2w/src/block/nbd-client.c: In function ‘nbd_client_co_block_status’:
/var/tmp/patchew-tester-tmp-erqpie2w/src/block/nbd-client.c:890:15: error: ‘extent.flags’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
NBDExtent extent;
^~~~~~
/var/tmp/patchew-tester-tmp-erqpie2w/src/block/nbd-client.c:925:19: error: ‘extent.length’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
*pnum = extent.length;
~~~~~~^~~~~~~
cc1: all warnings being treated as errors
make: *** [/var/tmp/patchew-tester-tmp-erqpie2w/src/rules.mak:66: block/nbd-client.o] Error 1
make: *** Waiting for unfinished jobs....
=== OUTPUT END ===
Test command exited with code: 2
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@freelists.org
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation
2018-03-13 2:06 ` no-reply
@ 2018-03-13 3:11 ` Eric Blake
2018-03-13 20:16 ` Eric Blake
0 siblings, 1 reply; 26+ messages in thread
From: Eric Blake @ 2018-03-13 3:11 UTC (permalink / raw)
To: qemu-devel, no-reply, vsementsov
Cc: kwolf, famz, qemu-block, mreitz, pbonzini, den
On 03/12/2018 09:06 PM, no-reply@patchew.org wrote:
> Hi,
>
> This series failed build test on s390x host. Please find the details below.
>
> Type: series
> Message-id: 20180312152126.286890-1-vsementsov@virtuozzo.com
> Subject: [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation
>
> CC block/nbd-client.o
> CC block/sheepdog.o
> /var/tmp/patchew-tester-tmp-erqpie2w/src/block/nbd-client.c: In function ‘nbd_client_co_block_status’:
> /var/tmp/patchew-tester-tmp-erqpie2w/src/block/nbd-client.c:890:15: error: ‘extent.flags’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
> NBDExtent extent;
> ^~~~~~
> /var/tmp/patchew-tester-tmp-erqpie2w/src/block/nbd-client.c:925:19: error: ‘extent.length’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
> *pnum = extent.length;
> ~~~~~~^~~~~~~
May be a false positive where the compiler merely can't see through the
logic, or it might be a real bug; but I suspect either way that the
solution is to initialize this (I'm guessing patch 5), as in:
NBDExtent extent = { 0 };
Will squash that in when I get to that part of the review.
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation
2018-03-13 3:11 ` Eric Blake
@ 2018-03-13 20:16 ` Eric Blake
0 siblings, 0 replies; 26+ messages in thread
From: Eric Blake @ 2018-03-13 20:16 UTC (permalink / raw)
To: qemu-devel, no-reply, vsementsov
Cc: kwolf, famz, qemu-block, mreitz, den, pbonzini
On 03/12/2018 10:11 PM, Eric Blake wrote:
>>
>
>> CC block/nbd-client.o
>> CC block/sheepdog.o
>> /var/tmp/patchew-tester-tmp-erqpie2w/src/block/nbd-client.c: In
>> function ‘nbd_client_co_block_status’:
>> /var/tmp/patchew-tester-tmp-erqpie2w/src/block/nbd-client.c:890:15:
>> error: ‘extent.flags’ may be used uninitialized in this function
>> [-Werror=maybe-uninitialized]
>> NBDExtent extent;
>> ^~~~~~
>> /var/tmp/patchew-tester-tmp-erqpie2w/src/block/nbd-client.c:925:19:
>> error: ‘extent.length’ may be used uninitialized in this function
>> [-Werror=maybe-uninitialized]
>> *pnum = extent.length;
>> ~~~~~~^~~~~~~
>
> May be a false positive where the compiler merely can't see through the
> logic, or it might be a real bug; but I suspect either way that the
> solution is to initialize this (I'm guessing patch 5), as in:
>
> NBDExtent extent = { 0 };
Not a sufficient fix - it's probably a real bug in that extent is never
initialized if the NBD_FOREACH_REPLY_CHUNK() loop in
nbd_co_receive_blockstatus_reply() never encounters an
NBD_REPLY_TYPE_BLOCK_STATUS chunk. A malicious server could just reply
with NBD_REPLY_TYPE_NONE (no status reported after all), but the block
layer contract requires us to make progress or return an error. So, if
the server didn't give us any extents, we need to turn it into an error
even if the server did not.
>
> Will squash that in when I get to that part of the review.
>
And I forgot to do it before the pull request v1, oops. Here's what I'm
squashing in for v2:
diff --git i/block/nbd-client.c w/block/nbd-client.c
index be160052cb1..486d73f1c63 100644
--- i/block/nbd-client.c
+++ w/block/nbd-client.c
@@ -694,6 +694,7 @@ static int
nbd_co_receive_blockstatus_reply(NBDClientSession *s,
Error *local_err = NULL;
bool received = false;
+ extent->length = 0;
NBD_FOREACH_REPLY_CHUNK(s, iter, handle, s->info.structured_reply,
NULL, &reply, &payload)
{
@@ -734,6 +735,13 @@ static int
nbd_co_receive_blockstatus_reply(NBDClientSession *s,
payload = NULL;
}
+ if (!extent->length && !iter.err) {
+ error_setg(&iter.err,
+ "Server did not reply with any status extents");
+ if (!iter.ret) {
+ iter.ret = -EIO;
+ }
+ }
error_propagate(errp, iter.err);
return iter.ret;
}
@@ -919,6 +927,7 @@ int coroutine_fn
nbd_client_co_block_status(BlockDriverState *bs,
return ret;
}
+ assert(extent.length);
*pnum = extent.length;
return (extent.flags & NBD_STATE_HOLE ? 0 : BDRV_BLOCK_DATA) |
(extent.flags & NBD_STATE_ZERO ? BDRV_BLOCK_ZERO : 0);
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
` (9 preceding siblings ...)
2018-03-13 2:06 ` no-reply
@ 2018-03-13 7:55 ` no-reply
2018-03-13 15:55 ` Eric Blake
11 siblings, 0 replies; 26+ messages in thread
From: no-reply @ 2018-03-13 7:55 UTC (permalink / raw)
To: vsementsov; +Cc: famz, qemu-devel, qemu-block, kwolf, mreitz, den, pbonzini
Hi,
This series failed docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
Type: series
Message-id: 20180312152126.286890-1-vsementsov@virtuozzo.com
Subject: [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation
=== TEST SCRIPT BEGIN ===
#!/bin/bash
set -e
git submodule update --init dtc
# Let docker tests dump environment info
export SHOW_ENV=1
export J=8
time make docker-test-mingw@fedora
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
0468de8fd4 iotests: new test 209 for NBD BLOCK_STATUS
0cb052328d iotests: add file_path helper
e1fdf97b2c iotests.py: tiny refactor: move system imports up
f04868b89f nbd: BLOCK_STATUS for standard get_block_status function: client part
e980f7a236 block/nbd-client: save first fatal error in nbd_iter_error
70db8ed7c8 nbd: BLOCK_STATUS for standard get_block_status function: server part
3914abac8b nbd/server: add nbd_read_opt_name helper
92d92ddabe nbd/server: add nbd_opt_invalid helper
=== OUTPUT BEGIN ===
Submodule 'dtc' (git://git.qemu-project.org/dtc.git) registered for path 'dtc'
Cloning into '/var/tmp/patchew-tester-tmp-9gffwiu7/src/dtc'...
Submodule path 'dtc': checked out 'e54388015af1fb4bf04d0bca99caba1074d9cc42'
BUILD fedora
make[1]: Entering directory '/var/tmp/patchew-tester-tmp-9gffwiu7/src'
GEN /var/tmp/patchew-tester-tmp-9gffwiu7/src/docker-src.2018-03-13-03.53.11.7128/qemu.tar
Cloning into '/var/tmp/patchew-tester-tmp-9gffwiu7/src/docker-src.2018-03-13-03.53.11.7128/qemu.tar.vroot'...
done.
Checking out files: 46% (2769/5993)
Checking out files: 47% (2817/5993)
Checking out files: 48% (2877/5993)
Checking out files: 49% (2937/5993)
Checking out files: 50% (2997/5993)
Checking out files: 51% (3057/5993)
Checking out files: 52% (3117/5993)
Checking out files: 53% (3177/5993)
Checking out files: 54% (3237/5993)
Checking out files: 55% (3297/5993)
Checking out files: 56% (3357/5993)
Checking out files: 57% (3417/5993)
Checking out files: 58% (3476/5993)
Checking out files: 59% (3536/5993)
Checking out files: 60% (3596/5993)
Checking out files: 61% (3656/5993)
Checking out files: 62% (3716/5993)
Checking out files: 63% (3776/5993)
Checking out files: 64% (3836/5993)
Checking out files: 65% (3896/5993)
Checking out files: 66% (3956/5993)
Checking out files: 67% (4016/5993)
Checking out files: 68% (4076/5993)
Checking out files: 69% (4136/5993)
Checking out files: 70% (4196/5993)
Checking out files: 71% (4256/5993)
Checking out files: 72% (4315/5993)
Checking out files: 73% (4375/5993)
Checking out files: 74% (4435/5993)
Checking out files: 75% (4495/5993)
Checking out files: 76% (4555/5993)
Checking out files: 77% (4615/5993)
Checking out files: 78% (4675/5993)
Checking out files: 79% (4735/5993)
Checking out files: 80% (4795/5993)
Checking out files: 81% (4855/5993)
Checking out files: 82% (4915/5993)
Checking out files: 83% (4975/5993)
Checking out files: 84% (5035/5993)
Checking out files: 85% (5095/5993)
Checking out files: 86% (5154/5993)
Checking out files: 87% (5214/5993)
Checking out files: 88% (5274/5993)
Checking out files: 89% (5334/5993)
Checking out files: 90% (5394/5993)
Checking out files: 91% (5454/5993)
Checking out files: 92% (5514/5993)
Checking out files: 93% (5574/5993)
Checking out files: 94% (5634/5993)
Checking out files: 95% (5694/5993)
Checking out files: 96% (5754/5993)
Checking out files: 97% (5814/5993)
Checking out files: 98% (5874/5993)
Checking out files: 98% (5876/5993)
Checking out files: 99% (5934/5993)
Checking out files: 100% (5993/5993)
Checking out files: 100% (5993/5993), done.
Your branch is up-to-date with 'origin/test'.
Submodule 'dtc' (git://git.qemu-project.org/dtc.git) registered for path 'dtc'
Cloning into '/var/tmp/patchew-tester-tmp-9gffwiu7/src/docker-src.2018-03-13-03.53.11.7128/qemu.tar.vroot/dtc'...
Submodule path 'dtc': checked out 'e54388015af1fb4bf04d0bca99caba1074d9cc42'
Submodule 'ui/keycodemapdb' (git://git.qemu.org/keycodemapdb.git) registered for path 'ui/keycodemapdb'
Cloning into '/var/tmp/patchew-tester-tmp-9gffwiu7/src/docker-src.2018-03-13-03.53.11.7128/qemu.tar.vroot/ui/keycodemapdb'...
Submodule path 'ui/keycodemapdb': checked out '6b3d716e2b6472eb7189d3220552280ef3d832ce'
COPY RUNNER
RUN test-mingw in qemu:fedora
Packages installed:
PyYAML-3.12-5.fc27.x86_64
SDL-devel-1.2.15-29.fc27.x86_64
bc-1.07.1-3.fc27.x86_64
bison-3.0.4-8.fc27.x86_64
bzip2-1.0.6-24.fc27.x86_64
ccache-3.3.5-1.fc27.x86_64
clang-5.0.1-1.fc27.x86_64
findutils-4.6.0-14.fc27.x86_64
flex-2.6.1-5.fc27.x86_64
gcc-7.3.1-2.fc27.x86_64
gcc-c++-7.3.1-2.fc27.x86_64
gettext-0.19.8.1-12.fc27.x86_64
git-2.14.3-2.fc27.x86_64
glib2-devel-2.54.3-2.fc27.x86_64
hostname-3.18-4.fc27.x86_64
libaio-devel-0.3.110-9.fc27.x86_64
libasan-7.3.1-2.fc27.x86_64
libfdt-devel-1.4.6-1.fc27.x86_64
libubsan-7.3.1-2.fc27.x86_64
make-4.2.1-4.fc27.x86_64
mingw32-SDL-1.2.15-9.fc27.noarch
mingw32-bzip2-1.0.6-9.fc27.noarch
mingw32-curl-7.54.1-2.fc27.noarch
mingw32-glib2-2.54.1-1.fc27.noarch
mingw32-gmp-6.1.2-2.fc27.noarch
mingw32-gnutls-3.5.13-2.fc27.noarch
mingw32-gtk2-2.24.31-4.fc27.noarch
mingw32-gtk3-3.22.16-1.fc27.noarch
mingw32-libjpeg-turbo-1.5.1-3.fc27.noarch
mingw32-libpng-1.6.29-2.fc27.noarch
mingw32-libssh2-1.8.0-3.fc27.noarch
mingw32-libtasn1-4.13-1.fc27.noarch
mingw32-nettle-3.3-3.fc27.noarch
mingw32-pixman-0.34.0-3.fc27.noarch
mingw32-pkg-config-0.28-9.fc27.x86_64
mingw64-SDL-1.2.15-9.fc27.noarch
mingw64-bzip2-1.0.6-9.fc27.noarch
mingw64-curl-7.54.1-2.fc27.noarch
mingw64-glib2-2.54.1-1.fc27.noarch
mingw64-gmp-6.1.2-2.fc27.noarch
mingw64-gnutls-3.5.13-2.fc27.noarch
mingw64-gtk2-2.24.31-4.fc27.noarch
mingw64-gtk3-3.22.16-1.fc27.noarch
mingw64-libjpeg-turbo-1.5.1-3.fc27.noarch
mingw64-libpng-1.6.29-2.fc27.noarch
mingw64-libssh2-1.8.0-3.fc27.noarch
mingw64-libtasn1-4.13-1.fc27.noarch
mingw64-nettle-3.3-3.fc27.noarch
mingw64-pixman-0.34.0-3.fc27.noarch
mingw64-pkg-config-0.28-9.fc27.x86_64
nettle-devel-3.4-1.fc27.x86_64
perl-5.26.1-402.fc27.x86_64
pixman-devel-0.34.0-4.fc27.x86_64
python3-3.6.2-13.fc27.x86_64
sparse-0.5.1-2.fc27.x86_64
tar-1.29-7.fc27.x86_64
which-2.21-4.fc27.x86_64
zlib-devel-1.2.11-4.fc27.x86_64
Environment variables:
TARGET_LIST=
PACKAGES=ccache gettext git tar PyYAML sparse flex bison python3 bzip2 hostname glib2-devel pixman-devel zlib-devel SDL-devel libfdt-devel gcc gcc-c++ clang make perl which bc findutils libaio-devel nettle-devel libasan libubsan mingw32-pixman mingw32-glib2 mingw32-gmp mingw32-SDL mingw32-pkg-config mingw32-gtk2 mingw32-gtk3 mingw32-gnutls mingw32-nettle mingw32-libtasn1 mingw32-libjpeg-turbo mingw32-libpng mingw32-curl mingw32-libssh2 mingw32-bzip2 mingw64-pixman mingw64-glib2 mingw64-gmp mingw64-SDL mingw64-pkg-config mingw64-gtk2 mingw64-gtk3 mingw64-gnutls mingw64-nettle mingw64-libtasn1 mingw64-libjpeg-turbo mingw64-libpng mingw64-curl mingw64-libssh2 mingw64-bzip2
J=8
V=
HOSTNAME=c9cefb466502
DEBUG=
SHOW_ENV=1
PWD=/
HOME=/root
CCACHE_DIR=/var/tmp/ccache
DISTTAG=f27container
QEMU_CONFIGURE_OPTS=--python=/usr/bin/python3
FGC=f27
TEST_DIR=/tmp/qemu-test
SHLVL=1
FEATURES=mingw clang pyyaml asan dtc
PATH=/usr/lib/ccache:/usr/lib64/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
MAKEFLAGS= -j8
EXTRA_CONFIGURE_OPTS=
_=/usr/bin/env
Configure options:
--enable-werror --target-list=x86_64-softmmu,aarch64-softmmu --prefix=/tmp/qemu-test/install --python=/usr/bin/python3 --cross-prefix=x86_64-w64-mingw32- --enable-trace-backends=simple --enable-gnutls --enable-nettle --enable-curl --enable-vnc --enable-bzip2 --enable-guest-agent --with-sdlabi=1.2 --with-gtkabi=2.0
Install prefix /tmp/qemu-test/install
BIOS directory /tmp/qemu-test/install
firmware path /tmp/qemu-test/install/share/qemu-firmware
binary directory /tmp/qemu-test/install
library directory /tmp/qemu-test/install/lib
module directory /tmp/qemu-test/install/lib
libexec directory /tmp/qemu-test/install/libexec
include directory /tmp/qemu-test/install/include
config directory /tmp/qemu-test/install
local state directory queried at runtime
Windows SDK no
Source path /tmp/qemu-test/src
GIT binary git
GIT submodules
C compiler x86_64-w64-mingw32-gcc
Host C compiler cc
C++ compiler x86_64-w64-mingw32-g++
Objective-C compiler clang
ARFLAGS rv
CFLAGS -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -g
QEMU_CFLAGS -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/pixman-1 -I$(SRC_PATH)/dtc/libfdt -Werror -DHAS_LIBSSH2_SFTP_FSYNC -mms-bitfields -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/glib-2.0 -I/usr/x86_64-w64-mingw32/sys-root/mingw/lib/glib-2.0/include -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -m64 -mcx16 -mthreads -D__USE_MINGW_ANSI_STDIO=1 -DWIN32_LEAN_AND_MEAN -DWINVER=0x501 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wexpansion-to-defined -Wendif-labels -Wno-shift-negative-value -Wno-missing-include-dirs -Wempty-body -Wnested-externs -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wold-style-declaration -Wold-style-definition -Wtype-limits -fstack-protector-strong -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/p11-kit-1 -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -I/usr/x86_64-w64-mingw32/sys-root/mingw/include -I/usr/x86_64-w64-mingw32/sys-root/mingw/include/libpng16
LDFLAGS -Wl,--nxcompat -Wl,--no-seh -Wl,--dynamicbase -Wl,--warn-common -m64 -g
make make
install install
python /usr/bin/python3 -B
smbd /usr/sbin/smbd
module support no
host CPU x86_64
host big endian no
target list x86_64-softmmu aarch64-softmmu
gprof enabled no
sparse enabled no
strip binaries yes
profiler no
static build no
SDL support yes (1.2.15)
GTK support yes (2.24.31)
GTK GL support no
VTE support no
TLS priority NORMAL
GNUTLS support yes
GNUTLS rnd yes
libgcrypt no
libgcrypt kdf no
nettle yes (3.3)
nettle kdf yes
libtasn1 yes
curses support no
virgl support no
curl support yes
mingw32 support yes
Audio drivers dsound
Block whitelist (rw)
Block whitelist (ro)
VirtFS support no
Multipath support no
VNC support yes
VNC SASL support no
VNC JPEG support yes
VNC PNG support yes
xen support no
brlapi support no
bluez support no
Documentation no
PIE no
vde support no
netmap support no
Linux AIO support no
ATTR/XATTR support no
Install blobs yes
KVM support no
HAX support yes
HVF support no
WHPX support no
TCG support yes
TCG debug enabled no
TCG interpreter no
malloc trim support no
RDMA support no
fdt support yes
preadv support no
fdatasync no
madvise no
posix_madvise no
posix_memalign no
libcap-ng support no
vhost-net support no
vhost-crypto support no
vhost-scsi support no
vhost-vsock support no
vhost-user support no
Trace backends simple
Trace output file trace-<pid>
spice support no
rbd support no
xfsctl support no
smartcard support no
libusb no
usb net redir no
OpenGL support no
OpenGL dmabufs no
libiscsi support no
libnfs support no
build guest agent yes
QGA VSS support no
QGA w32 disk info yes
QGA MSI support no
seccomp support no
coroutine backend win32
coroutine pool yes
debug stack usage no
crypto afalg no
GlusterFS support no
gcov gcov
gcov enabled no
TPM support yes
libssh2 support yes
TPM passthrough no
TPM emulator no
QOM debugging yes
Live block migration yes
lzo support no
snappy support no
bzip2 support yes
NUMA host support no
libxml2 no
tcmalloc support no
jemalloc support no
avx2 optimization yes
replication support yes
VxHS block device no
capstone no
WARNING: Use of GTK 2.0 is deprecated and will be removed in
WARNING: future releases. Please switch to using GTK 3.0
WARNING: Use of SDL 1.2 is deprecated and will be removed in
WARNING: future releases. Please switch to using SDL 2.0
mkdir -p dtc/libfdt
mkdir -p dtc/tests
GEN aarch64-softmmu/config-devices.mak.tmp
GEN config-host.h
GEN qemu-options.def
GEN x86_64-softmmu/config-devices.mak.tmp
GEN trace/generated-tcg-tracers.h
GEN qapi-gen
GEN trace/generated-helpers-wrappers.h
GEN trace/generated-helpers.h
GEN trace/generated-helpers.c
GEN x86_64-softmmu/config-devices.mak
GEN aarch64-softmmu/config-devices.mak
GEN module_block.h
GEN ui/input-keymap-atset1-to-qcode.c
GEN ui/input-keymap-qcode-to-atset2.c
GEN ui/input-keymap-linux-to-qcode.c
GEN ui/input-keymap-qcode-to-atset1.c
GEN ui/input-keymap-qcode-to-atset3.c
GEN ui/input-keymap-qcode-to-linux.c
GEN ui/input-keymap-qcode-to-qnum.c
GEN ui/input-keymap-qcode-to-sun.c
GEN ui/input-keymap-qnum-to-qcode.c
GEN ui/input-keymap-usb-to-qcode.c
GEN ui/input-keymap-win32-to-qcode.c
GEN ui/input-keymap-x11-to-qcode.c
GEN ui/input-keymap-xorgevdev-to-qcode.c
GEN ui/input-keymap-xorgkbd-to-qcode.c
GEN ui/input-keymap-xorgxquartz-to-qcode.c
GEN ui/input-keymap-xorgxwin-to-qcode.c
GEN tests/test-qapi-gen
GEN trace-root.h
GEN util/trace.h
GEN crypto/trace.h
GEN io/trace.h
GEN migration/trace.h
GEN block/trace.h
GEN chardev/trace.h
GEN hw/block/trace.h
GEN hw/block/dataplane/trace.h
GEN hw/char/trace.h
GEN hw/intc/trace.h
GEN hw/net/trace.h
GEN hw/rdma/trace.h
GEN hw/rdma/vmw/trace.h
GEN hw/virtio/trace.h
GEN hw/audio/trace.h
GEN hw/misc/trace.h
GEN hw/misc/macio/trace.h
GEN hw/usb/trace.h
GEN hw/scsi/trace.h
GEN hw/nvram/trace.h
GEN hw/display/trace.h
GEN hw/input/trace.h
GEN hw/timer/trace.h
GEN hw/dma/trace.h
GEN hw/sparc/trace.h
GEN hw/sparc64/trace.h
GEN hw/sd/trace.h
GEN hw/isa/trace.h
GEN hw/mem/trace.h
GEN hw/i386/trace.h
GEN hw/i386/xen/trace.h
GEN hw/9pfs/trace.h
GEN hw/ppc/trace.h
GEN hw/pci/trace.h
GEN hw/pci-host/trace.h
GEN hw/s390x/trace.h
GEN hw/vfio/trace.h
GEN hw/acpi/trace.h
GEN hw/arm/trace.h
GEN hw/alpha/trace.h
GEN hw/hppa/trace.h
GEN hw/xen/trace.h
GEN hw/ide/trace.h
GEN hw/tpm/trace.h
GEN ui/trace.h
GEN audio/trace.h
GEN net/trace.h
GEN target/arm/trace.h
GEN target/i386/trace.h
GEN target/mips/trace.h
GEN target/sparc/trace.h
GEN target/s390x/trace.h
GEN target/ppc/trace.h
GEN qom/trace.h
GEN linux-user/trace.h
GEN qapi/trace.h
GEN accel/tcg/trace.h
GEN accel/kvm/trace.h
GEN nbd/trace.h
GEN scsi/trace.h
GEN trace-root.c
GEN util/trace.c
GEN crypto/trace.c
GEN io/trace.c
GEN migration/trace.c
GEN block/trace.c
GEN chardev/trace.c
GEN hw/block/trace.c
GEN hw/block/dataplane/trace.c
GEN hw/char/trace.c
GEN hw/intc/trace.c
GEN hw/net/trace.c
GEN hw/rdma/trace.c
GEN hw/rdma/vmw/trace.c
GEN hw/virtio/trace.c
GEN hw/audio/trace.c
GEN hw/misc/trace.c
GEN hw/misc/macio/trace.c
GEN hw/usb/trace.c
GEN hw/scsi/trace.c
GEN hw/nvram/trace.c
GEN hw/display/trace.c
GEN hw/input/trace.c
GEN hw/timer/trace.c
GEN hw/dma/trace.c
GEN hw/sparc/trace.c
GEN hw/sparc64/trace.c
GEN hw/sd/trace.c
GEN hw/isa/trace.c
GEN hw/mem/trace.c
GEN hw/i386/trace.c
GEN hw/i386/xen/trace.c
GEN hw/9pfs/trace.c
GEN hw/ppc/trace.c
GEN hw/pci/trace.c
GEN hw/pci-host/trace.c
GEN hw/s390x/trace.c
GEN hw/vfio/trace.c
GEN hw/acpi/trace.c
GEN hw/arm/trace.c
GEN hw/alpha/trace.c
GEN hw/hppa/trace.c
GEN hw/xen/trace.c
GEN hw/ide/trace.c
GEN hw/tpm/trace.c
GEN ui/trace.c
GEN audio/trace.c
GEN net/trace.c
GEN target/arm/trace.c
GEN target/i386/trace.c
GEN target/mips/trace.c
GEN target/sparc/trace.c
GEN target/s390x/trace.c
GEN target/ppc/trace.c
GEN qom/trace.c
GEN linux-user/trace.c
GEN qapi/trace.c
GEN accel/tcg/trace.c
GEN accel/kvm/trace.c
GEN nbd/trace.c
GEN scsi/trace.c
GEN config-all-devices.mak
DEP /tmp/qemu-test/src/dtc/tests/dumptrees.c
DEP /tmp/qemu-test/src/dtc/tests/trees.S
DEP /tmp/qemu-test/src/dtc/tests/testutils.c
DEP /tmp/qemu-test/src/dtc/tests/value-labels.c
DEP /tmp/qemu-test/src/dtc/tests/asm_tree_dump.c
DEP /tmp/qemu-test/src/dtc/tests/truncated_property.c
DEP /tmp/qemu-test/src/dtc/tests/check_path.c
DEP /tmp/qemu-test/src/dtc/tests/overlay_bad_fixup.c
DEP /tmp/qemu-test/src/dtc/tests/overlay.c
DEP /tmp/qemu-test/src/dtc/tests/subnode_iterate.c
DEP /tmp/qemu-test/src/dtc/tests/property_iterate.c
DEP /tmp/qemu-test/src/dtc/tests/integer-expressions.c
DEP /tmp/qemu-test/src/dtc/tests/utilfdt_test.c
DEP /tmp/qemu-test/src/dtc/tests/path_offset_aliases.c
DEP /tmp/qemu-test/src/dtc/tests/add_subnode_with_nops.c
DEP /tmp/qemu-test/src/dtc/tests/dtbs_equal_unordered.c
DEP /tmp/qemu-test/src/dtc/tests/dtb_reverse.c
DEP /tmp/qemu-test/src/dtc/tests/dtbs_equal_ordered.c
DEP /tmp/qemu-test/src/dtc/tests/extra-terminating-null.c
DEP /tmp/qemu-test/src/dtc/tests/incbin.c
DEP /tmp/qemu-test/src/dtc/tests/boot-cpuid.c
DEP /tmp/qemu-test/src/dtc/tests/phandle_format.c
DEP /tmp/qemu-test/src/dtc/tests/path-references.c
DEP /tmp/qemu-test/src/dtc/tests/references.c
DEP /tmp/qemu-test/src/dtc/tests/string_escapes.c
DEP /tmp/qemu-test/src/dtc/tests/propname_escapes.c
DEP /tmp/qemu-test/src/dtc/tests/appendprop2.c
DEP /tmp/qemu-test/src/dtc/tests/appendprop1.c
DEP /tmp/qemu-test/src/dtc/tests/del_node.c
DEP /tmp/qemu-test/src/dtc/tests/del_property.c
DEP /tmp/qemu-test/src/dtc/tests/setprop.c
DEP /tmp/qemu-test/src/dtc/tests/set_name.c
DEP /tmp/qemu-test/src/dtc/tests/rw_tree1.c
DEP /tmp/qemu-test/src/dtc/tests/open_pack.c
DEP /tmp/qemu-test/src/dtc/tests/nopulate.c
DEP /tmp/qemu-test/src/dtc/tests/move_and_save.c
DEP /tmp/qemu-test/src/dtc/tests/mangle-layout.c
DEP /tmp/qemu-test/src/dtc/tests/sw_tree1.c
DEP /tmp/qemu-test/src/dtc/tests/nop_node.c
DEP /tmp/qemu-test/src/dtc/tests/nop_property.c
DEP /tmp/qemu-test/src/dtc/tests/setprop_inplace.c
DEP /tmp/qemu-test/src/dtc/tests/stringlist.c
DEP /tmp/qemu-test/src/dtc/tests/addr_size_cells.c
DEP /tmp/qemu-test/src/dtc/tests/notfound.c
DEP /tmp/qemu-test/src/dtc/tests/sized_cells.c
DEP /tmp/qemu-test/src/dtc/tests/char_literal.c
DEP /tmp/qemu-test/src/dtc/tests/get_alias.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_compatible.c
DEP /tmp/qemu-test/src/dtc/tests/node_check_compatible.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_phandle.c
DEP /tmp/qemu-test/src/dtc/tests/node_offset_by_prop_value.c
DEP /tmp/qemu-test/src/dtc/tests/parent_offset.c
DEP /tmp/qemu-test/src/dtc/tests/supernode_atdepth_offset.c
DEP /tmp/qemu-test/src/dtc/tests/get_path.c
DEP /tmp/qemu-test/src/dtc/tests/get_phandle.c
DEP /tmp/qemu-test/src/dtc/tests/getprop.c
DEP /tmp/qemu-test/src/dtc/tests/get_name.c
DEP /tmp/qemu-test/src/dtc/tests/path_offset.c
DEP /tmp/qemu-test/src/dtc/tests/subnode_offset.c
DEP /tmp/qemu-test/src/dtc/tests/find_property.c
DEP /tmp/qemu-test/src/dtc/tests/root_node.c
DEP /tmp/qemu-test/src/dtc/tests/get_mem_rsv.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_overlay.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_addresses.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_empty_tree.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_strerror.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_rw.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_sw.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_wip.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt_ro.c
DEP /tmp/qemu-test/src/dtc/libfdt/fdt.c
DEP /tmp/qemu-test/src/dtc/util.c
DEP /tmp/qemu-test/src/dtc/fdtoverlay.c
DEP /tmp/qemu-test/src/dtc/fdtput.c
DEP /tmp/qemu-test/src/dtc/fdtget.c
DEP /tmp/qemu-test/src/dtc/fdtdump.c
LEX convert-dtsv0-lexer.lex.c
DEP /tmp/qemu-test/src/dtc/srcpos.c
DEP /tmp/qemu-test/src/dtc/treesource.c
BISON dtc-parser.tab.c
DEP /tmp/qemu-test/src/dtc/fstree.c
DEP /tmp/qemu-test/src/dtc/flattree.c
DEP /tmp/qemu-test/src/dtc/livetree.c
LEX dtc-lexer.lex.c
DEP /tmp/qemu-test/src/dtc/dtc.c
DEP /tmp/qemu-test/src/dtc/data.c
DEP /tmp/qemu-test/src/dtc/checks.c
DEP convert-dtsv0-lexer.lex.c
DEP dtc-parser.tab.c
DEP dtc-lexer.lex.c
CHK version_gen.h
UPD version_gen.h
DEP /tmp/qemu-test/src/dtc/util.c
CC libfdt/fdt.o
CC libfdt/fdt_ro.o
CC libfdt/fdt_rw.o
CC libfdt/fdt_sw.o
CC libfdt/fdt_wip.o
CC libfdt/fdt_strerror.o
CC libfdt/fdt_empty_tree.o
CC libfdt/fdt_addresses.o
CC libfdt/fdt_overlay.o
AR libfdt/libfdt.a
x86_64-w64-mingw32-ar: creating libfdt/libfdt.a
a - libfdt/fdt.o
a - libfdt/fdt_ro.o
a - libfdt/fdt_wip.o
a - libfdt/fdt_sw.o
a - libfdt/fdt_rw.o
a - libfdt/fdt_strerror.o
a - libfdt/fdt_empty_tree.o
a - libfdt/fdt_addresses.o
a - libfdt/fdt_overlay.o
RC version.o
mkdir -p dtc/libfdt
mkdir -p dtc/tests
GEN qga/qapi-generated/qapi-gen
CC qapi/qapi-builtin-types.o
CC qapi/qapi-types-block-core.o
CC qapi/qapi-types-block.o
CC qapi/qapi-types.o
CC qapi/qapi-types-char.o
CC qapi/qapi-types-common.o
CC qapi/qapi-types-crypto.o
CC qapi/qapi-types-migration.o
CC qapi/qapi-types-introspect.o
CC qapi/qapi-types-misc.o
CC qapi/qapi-types-net.o
CC qapi/qapi-types-rocker.o
CC qapi/qapi-types-run-state.o
CC qapi/qapi-types-sockets.o
CC qapi/qapi-types-tpm.o
CC qapi/qapi-types-trace.o
CC qapi/qapi-types-transaction.o
CC qapi/qapi-types-ui.o
CC qapi/qapi-builtin-visit.o
CC qapi/qapi-visit.o
CC qapi/qapi-visit-block-core.o
CC qapi/qapi-visit-block.o
CC qapi/qapi-visit-char.o
CC qapi/qapi-visit-common.o
CC qapi/qapi-visit-crypto.o
CC qapi/qapi-visit-introspect.o
CC qapi/qapi-visit-migration.o
CC qapi/qapi-visit-misc.o
CC qapi/qapi-visit-net.o
CC qapi/qapi-visit-rocker.o
CC qapi/qapi-visit-run-state.o
CC qapi/qapi-visit-sockets.o
CC qapi/qapi-visit-tpm.o
CC qapi/qapi-visit-trace.o
CC qapi/qapi-visit-transaction.o
CC qapi/qapi-visit-ui.o
CC qapi/qapi-events.o
CC qapi/qapi-events-block-core.o
CC qapi/qapi-events-block.o
CC qapi/qapi-events-common.o
CC qapi/qapi-events-char.o
CC qapi/qapi-events-crypto.o
CC qapi/qapi-events-introspect.o
CC qapi/qapi-events-migration.o
CC qapi/qapi-events-misc.o
CC qapi/qapi-events-net.o
CC qapi/qapi-events-rocker.o
CC qapi/qapi-events-run-state.o
CC qapi/qapi-events-sockets.o
CC qapi/qapi-events-tpm.o
CC qapi/qapi-events-trace.o
CC qapi/qapi-events-transaction.o
CC qapi/qapi-events-ui.o
CC qapi/qapi-introspect.o
CC qapi/qapi-visit-core.o
CC qapi/qapi-dealloc-visitor.o
CC qapi/qobject-input-visitor.o
CC qapi/qobject-output-visitor.o
CC qapi/qmp-registry.o
CC qapi/qmp-dispatch.o
CC qapi/string-input-visitor.o
CC qapi/string-output-visitor.o
CC qapi/opts-visitor.o
CC qapi/qapi-clone-visitor.o
CC qapi/qmp-event.o
CC qapi/qapi-util.o
CC qobject/qnull.o
CC qobject/qnum.o
CC qobject/qstring.o
CC qobject/qdict.o
CC qobject/qlist.o
CC qobject/qbool.o
CC qobject/qlit.o
CC qobject/qjson.o
CC qobject/qobject.o
CC qobject/json-lexer.o
CC qobject/json-streamer.o
CC qobject/json-parser.o
CC trace/simple.o
CC trace/control.o
CC trace/qmp.o
CC util/osdep.o
CC util/cutils.o
CC util/unicode.o
CC util/qemu-timer-common.o
CC util/bufferiszero.o
CC util/lockcnt.o
CC util/aiocb.o
CC util/async.o
CC util/aio-wait.o
CC util/thread-pool.o
CC util/qemu-timer.o
CC util/main-loop.o
CC util/iohandler.o
CC util/aio-win32.o
CC util/event_notifier-win32.o
CC util/oslib-win32.o
CC util/qemu-thread-win32.o
CC util/envlist.o
CC util/path.o
CC util/module.o
CC util/host-utils.o
CC util/bitmap.o
CC util/bitops.o
CC util/hbitmap.o
CC util/fifo8.o
CC util/acl.o
CC util/cacheinfo.o
CC util/error.o
CC util/qemu-error.o
CC util/id.o
CC util/iov.o
CC util/qemu-config.o
CC util/qemu-sockets.o
CC util/uri.o
CC util/notify.o
CC util/qemu-option.o
CC util/qemu-progress.o
CC util/keyval.o
CC util/hexdump.o
CC util/crc32c.o
CC util/uuid.o
CC util/throttle.o
CC util/getauxval.o
CC util/readline.o
CC util/rcu.o
CC util/qemu-coroutine.o
CC util/qemu-coroutine-lock.o
CC util/qemu-coroutine-io.o
CC util/qemu-coroutine-sleep.o
CC util/coroutine-win32.o
CC util/buffer.o
CC util/timed-average.o
CC util/base64.o
CC util/log.o
CC util/pagesize.o
CC util/qdist.o
CC util/qht.o
CC util/range.o
CC util/stats64.o
CC util/systemd.o
CC util/trace.o
CC trace-root.o
CC crypto/trace.o
CC io/trace.o
CC migration/trace.o
CC block/trace.o
CC hw/block/trace.o
CC chardev/trace.o
CC hw/block/dataplane/trace.o
CC hw/char/trace.o
CC hw/intc/trace.o
CC hw/rdma/trace.o
CC hw/net/trace.o
CC hw/rdma/vmw/trace.o
CC hw/virtio/trace.o
CC hw/audio/trace.o
CC hw/misc/trace.o
CC hw/misc/macio/trace.o
CC hw/usb/trace.o
CC hw/scsi/trace.o
CC hw/nvram/trace.o
CC hw/display/trace.o
CC hw/input/trace.o
CC hw/timer/trace.o
CC hw/dma/trace.o
CC hw/sparc/trace.o
CC hw/sparc64/trace.o
CC hw/sd/trace.o
CC hw/isa/trace.o
CC hw/mem/trace.o
CC hw/i386/trace.o
CC hw/i386/xen/trace.o
CC hw/9pfs/trace.o
CC hw/ppc/trace.o
CC hw/pci/trace.o
CC hw/pci-host/trace.o
CC hw/s390x/trace.o
CC hw/vfio/trace.o
CC hw/acpi/trace.o
CC hw/arm/trace.o
CC hw/alpha/trace.o
CC hw/hppa/trace.o
CC hw/xen/trace.o
CC hw/ide/trace.o
CC hw/tpm/trace.o
CC ui/trace.o
CC audio/trace.o
CC net/trace.o
CC target/arm/trace.o
CC target/i386/trace.o
CC target/mips/trace.o
CC target/sparc/trace.o
CC target/s390x/trace.o
CC target/ppc/trace.o
CC qom/trace.o
CC linux-user/trace.o
CC qapi/trace.o
CC accel/tcg/trace.o
CC accel/kvm/trace.o
CC nbd/trace.o
CC scsi/trace.o
CC crypto/pbkdf-stub.o
CC stubs/arch-query-cpu-def.o
CC stubs/arch-query-cpu-model-expansion.o
CC stubs/arch-query-cpu-model-comparison.o
CC stubs/arch-query-cpu-model-baseline.o
CC stubs/bdrv-next-monitor-owned.o
CC stubs/blk-commit-all.o
CC stubs/blockdev-close-all-bdrv-states.o
CC stubs/clock-warp.o
CC stubs/cpu-get-clock.o
CC stubs/cpu-get-icount.o
CC stubs/dump.o
CC stubs/error-printf.o
CC stubs/fdset.o
CC stubs/gdbstub.o
CC stubs/get-vm-name.o
CC stubs/iothread.o
CC stubs/iothread-lock.o
CC stubs/is-daemonized.o
CC stubs/machine-init-done.o
CC stubs/migr-blocker.o
CC stubs/change-state-handler.o
CC stubs/monitor.o
CC stubs/notify-event.o
CC stubs/qtest.o
CC stubs/replay.o
CC stubs/runstate-check.o
CC stubs/set-fd-handler.o
CC stubs/slirp.o
CC stubs/sysbus.o
CC stubs/tpm.o
CC stubs/trace-control.o
CC stubs/uuid.o
CC stubs/vm-stop.o
CC stubs/vmstate.o
CC stubs/fd-register.o
CC stubs/qmp_pc_dimm.o
CC stubs/target-monitor-defs.o
CC stubs/target-get-monitor-def.o
CC stubs/pc_madt_cpu_entry.o
CC stubs/vmgenid.o
CC stubs/xen-common.o
CC stubs/xen-hvm.o
CC stubs/pci-host-piix.o
CC stubs/ram-block.o
GEN qemu-img-cmds.h
CC block.o
CC blockjob.o
CC qemu-io-cmds.o
CC replication.o
CC block/raw-format.o
CC block/qcow.o
CC block/vdi.o
CC block/vmdk.o
CC block/cloop.o
CC block/bochs.o
CC block/vpc.o
CC block/vvfat.o
CC block/dmg.o
CC block/qcow2.o
CC block/qcow2-refcount.o
CC block/qcow2-cluster.o
CC block/qcow2-snapshot.o
CC block/qcow2-cache.o
CC block/qcow2-bitmap.o
CC block/qed.o
CC block/qed-l2-cache.o
CC block/qed-table.o
CC block/qed-cluster.o
CC block/qed-check.o
CC block/vhdx.o
CC block/vhdx-endian.o
CC block/vhdx-log.o
CC block/quorum.o
CC block/parallels.o
CC block/blkdebug.o
CC block/blkverify.o
CC block/blkreplay.o
CC block/block-backend.o
CC block/snapshot.o
CC block/qapi.o
CC block/file-win32.o
CC block/win32-aio.o
CC block/null.o
CC block/mirror.o
CC block/commit.o
CC block/io.o
CC block/throttle-groups.o
CC block/nbd.o
CC block/nbd-client.o
CC block/sheepdog.o
CC block/accounting.o
CC block/dirty-bitmap.o
CC block/write-threshold.o
CC block/backup.o
CC block/replication.o
/tmp/qemu-test/src/block/nbd-client.c: In function 'nbd_client_co_block_status':
/tmp/qemu-test/src/block/nbd-client.c:890:15: error: 'extent.flags' may be used uninitialized in this function [-Werror=maybe-uninitialized]
NBDExtent extent;
^~~~~~
/tmp/qemu-test/src/block/nbd-client.c:925:19: error: 'extent.length' may be used uninitialized in this function [-Werror=maybe-uninitialized]
*pnum = extent.length;
~~~~~~^~~~~~~
cc1: all warnings being treated as errors
make: *** [/tmp/qemu-test/src/rules.mak:66: block/nbd-client.o] Error 1
make: *** Waiting for unfinished jobs....
Traceback (most recent call last):
File "./tests/docker/docker.py", line 407, in <module>
sys.exit(main())
File "./tests/docker/docker.py", line 404, in main
return args.cmdobj.run(args, argv)
File "./tests/docker/docker.py", line 261, in run
return Docker().run(argv, args.keep, quiet=args.quiet)
File "./tests/docker/docker.py", line 229, in run
quiet=quiet)
File "./tests/docker/docker.py", line 147, in _do_check
return subprocess.check_call(self._command + cmd, **kwargs)
File "/usr/lib64/python2.7/subprocess.py", line 186, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['docker', 'run', '--label', 'com.qemu.instance.uuid=9a489d40269311e886fa52540069c830', '-u', '0', '--security-opt', 'seccomp=unconfined', '--rm', '--net=none', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=8', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/root/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-9gffwiu7/src/docker-src.2018-03-13-03.53.11.7128:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-mingw']' returned non-zero exit status 2
make[1]: *** [tests/docker/Makefile.include:129: docker-run] Error 1
make[1]: Leaving directory '/var/tmp/patchew-tester-tmp-9gffwiu7/src'
make: *** [tests/docker/Makefile.include:163: docker-run-test-mingw@fedora] Error 2
real 2m21.633s
user 0m4.878s
sys 0m4.088s
=== OUTPUT END ===
Test command exited with code: 2
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@freelists.org
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation
2018-03-12 15:21 [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation Vladimir Sementsov-Ogievskiy
` (10 preceding siblings ...)
2018-03-13 7:55 ` no-reply
@ 2018-03-13 15:55 ` Eric Blake
2018-03-13 16:15 ` Vladimir Sementsov-Ogievskiy
11 siblings, 1 reply; 26+ messages in thread
From: Eric Blake @ 2018-03-13 15:55 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, qemu-devel, qemu-block
Cc: mreitz, kwolf, pbonzini, den
On 03/12/2018 10:21 AM, Vladimir Sementsov-Ogievskiy wrote:
> Hi all.
>
> Here is minimal realization of base:allocation context of NBD
> block-status extension, which allows to get block status through
> NBD.
>
> v2 changes are in each patch after "---" line.
>
> Vladimir Sementsov-Ogievskiy (8):
> nbd/server: add nbd_opt_invalid helper
> nbd/server: add nbd_read_opt_name helper
> nbd: BLOCK_STATUS for standard get_block_status function: server part
> block/nbd-client: save first fatal error in nbd_iter_error
> nbd: BLOCK_STATUS for standard get_block_status function: client part
> iotests.py: tiny refactor: move system imports up
> iotests: add file_path helper
> iotests: new test 209 for NBD BLOCK_STATUS
I've staged this on my NBD queue, pull request to come later today
(still this morning for me) so that it makes 2.12 softfreeze.
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [Qemu-devel] [PATCH v2 0/8] nbd block status base:allocation
2018-03-13 15:55 ` Eric Blake
@ 2018-03-13 16:15 ` Vladimir Sementsov-Ogievskiy
0 siblings, 0 replies; 26+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2018-03-13 16:15 UTC (permalink / raw)
To: Eric Blake, qemu-devel, qemu-block; +Cc: mreitz, kwolf, pbonzini, den
13.03.2018 18:55, Eric Blake wrote:
> On 03/12/2018 10:21 AM, Vladimir Sementsov-Ogievskiy wrote:
>> Hi all.
>>
>> Here is minimal realization of base:allocation context of NBD
>> block-status extension, which allows to get block status through
>> NBD.
>>
>> v2 changes are in each patch after "---" line.
>>
>> Vladimir Sementsov-Ogievskiy (8):
>> nbd/server: add nbd_opt_invalid helper
>> nbd/server: add nbd_read_opt_name helper
>> nbd: BLOCK_STATUS for standard get_block_status function: server part
>> block/nbd-client: save first fatal error in nbd_iter_error
>> nbd: BLOCK_STATUS for standard get_block_status function: client part
>> iotests.py: tiny refactor: move system imports up
>> iotests: add file_path helper
>> iotests: new test 209 for NBD BLOCK_STATUS
>
> I've staged this on my NBD queue, pull request to come later today
> (still this morning for me) so that it makes 2.12 softfreeze.
>
So, I'm happy, thank you!
--
Best regards,
Vladimir
^ permalink raw reply [flat|nested] 26+ messages in thread