[U-Boot] [PATCH 1/4] usb: Remove unused ppc4xx EHCI host driver

[U-Boot] [PATCH 1/4] usb: Remove unused ppc4xx EHCI host driver

[Stefan Roese]

ppc4xx support was removed some time ago. Lets remove the now unused
EHCI driver and all its references for this platform as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Marek Vasut <marex@denx.de>
---
 drivers/usb/host/Makefile      |  1 -
 drivers/usb/host/ehci-ppc4xx.c | 35 -----------------------------------
 2 files changed, 36 deletions(-)
 delete mode 100644 drivers/usb/host/ehci-ppc4xx.c

diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 7f9ba24cfe..98194893b9 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -35,7 +35,6 @@ obj-$(CONFIG_USB_EHCI_MX5) += ehci-mx5.o
 obj-$(CONFIG_USB_EHCI_MX6) += ehci-mx6.o
 obj-$(CONFIG_USB_EHCI_MX7) += ehci-mx6.o
 obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
-obj-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
 obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
 obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
 obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
diff --git a/drivers/usb/host/ehci-ppc4xx.c b/drivers/usb/host/ehci-ppc4xx.c
deleted file mode 100644
index 9d23577642..0000000000
--- a/drivers/usb/host/ehci-ppc4xx.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * (C) Copyright 2010, Chris Zhang <chris@seamicro.com>
- *
- * Author: Chris Zhang <chris@seamicro.com>
- * This code is based on ehci freescale driver
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <usb.h>
-#include <asm/io.h>
-
-#include "ehci.h"
-
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	*hccr = (struct ehci_hccr *)(CONFIG_SYS_PPC4XX_USB_ADDR);
-	*hcor = (struct ehci_hcor *)((uint32_t) *hccr +
-		HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-	return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
-	return 0;
-}
-- 
2.16.2

[U-Boot] [PATCH 2/4] nand: Remove unused ppc4xx NAND driver and references

[Stefan Roese]

ppc4xx support was removed some time ago. Lets remove the now unused
NAND driver and all its references for this platform as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Scott Wood <oss@buserror.net>
---
 drivers/mtd/nand/Makefile    |   1 -
 drivers/mtd/nand/nand_ecc.c  |  16 ----
 drivers/mtd/nand/ndfc.c      | 200 -------------------------------------------
 scripts/config_whitelist.txt |   2 -
 4 files changed, 219 deletions(-)
 delete mode 100644 drivers/mtd/nand/ndfc.c

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 9f7d9d6ff7..332d905a3a 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -57,7 +57,6 @@ obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o
 obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o
 obj-$(CONFIG_NAND_MXC) += mxc_nand.o
 obj-$(CONFIG_NAND_MXS) += mxs_nand.o
-obj-$(CONFIG_NAND_NDFC) += ndfc.o
 obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
 obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
 obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 8b548b204d..13a6535bd5 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -29,11 +29,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand_ecc.h>
 
-/* The PPC4xx NDFC uses Smart Media (SMC) bytes order */
-#ifdef CONFIG_NAND_NDFC
-#define CONFIG_MTD_NAND_ECC_SMC
-#endif
-
 /*
  * NAND-SPL has no sofware ECC for now, so don't include nand_calculate_ecc(),
  * only nand_correct_data() is needed
@@ -110,13 +105,8 @@ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 	tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
 
 	/* Calculate final ECC code */
-#ifdef CONFIG_MTD_NAND_ECC_SMC
-	ecc_code[0] = ~tmp2;
-	ecc_code[1] = ~tmp1;
-#else
 	ecc_code[0] = ~tmp1;
 	ecc_code[1] = ~tmp2;
-#endif
 	ecc_code[2] = ((~reg1) << 2) | 0x03;
 
 	return 0;
@@ -146,15 +136,9 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat,
 {
 	uint8_t s0, s1, s2;
 
-#ifdef CONFIG_MTD_NAND_ECC_SMC
-	s0 = calc_ecc[0] ^ read_ecc[0];
-	s1 = calc_ecc[1] ^ read_ecc[1];
-	s2 = calc_ecc[2] ^ read_ecc[2];
-#else
 	s1 = calc_ecc[0] ^ read_ecc[0];
 	s0 = calc_ecc[1] ^ read_ecc[1];
 	s2 = calc_ecc[2] ^ read_ecc[2];
-#endif
 	if ((s0 | s1 | s2) == 0)
 		return 0;
 
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
deleted file mode 100644
index 0a9849e9bc..0000000000
--- a/drivers/mtd/nand/ndfc.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Overview:
- *   Platform independent driver for NDFC (NanD Flash Controller)
- *   integrated into IBM/AMCC PPC4xx cores
- *
- * (C) Copyright 2006-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Based on original work by
- *	Thomas Gleixner
- *	Copyright 2006 IBM
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <nand.h>
-#include <linux/mtd/ndfc.h>
-#include <linux/mtd/nand_ecc.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx.h>
-
-#ifndef CONFIG_SYS_NAND_BCR
-#define CONFIG_SYS_NAND_BCR 0x80002222
-#endif
-#ifndef CONFIG_SYS_NDFC_EBC0_CFG
-#define CONFIG_SYS_NDFC_EBC0_CFG 0xb8400000
-#endif
-
-/*
- * We need to store the info, which chip-select (CS) is used for the
- * chip number. For example on Sequoia NAND chip #0 uses
- * CS #3.
- */
-static int ndfc_cs[NDFC_MAX_BANKS];
-
-static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd_to_nand(mtd);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		out_8((u8 *)(base + NDFC_CMD), cmd & 0xFF);
-	else
-		out_8((u8 *)(base + NDFC_ALE), cmd & 0xFF);
-}
-
-static int ndfc_dev_ready(struct mtd_info *mtdinfo)
-{
-	struct nand_chip *this = mtd_to_nand(mtdinfo);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-
-	return (in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY);
-}
-
-static void ndfc_enable_hwecc(struct mtd_info *mtdinfo, int mode)
-{
-	struct nand_chip *this = mtd_to_nand(mtdinfo);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-	u32 ccr;
-
-	ccr = in_be32((u32 *)(base + NDFC_CCR));
-	ccr |= NDFC_CCR_RESET_ECC;
-	out_be32((u32 *)(base + NDFC_CCR), ccr);
-}
-
-static int ndfc_calculate_ecc(struct mtd_info *mtdinfo,
-			      const u_char *dat, u_char *ecc_code)
-{
-	struct nand_chip *this = mtd_to_nand(mtdinfo);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-	u32 ecc;
-	u8 *p = (u8 *)&ecc;
-
-	ecc = in_be32((u32 *)(base + NDFC_ECC));
-
-	/* The NDFC uses Smart Media (SMC) bytes order
-	 */
-	ecc_code[0] = p[1];
-	ecc_code[1] = p[2];
-	ecc_code[2] = p[3];
-
-	return 0;
-}
-
-/*
- * Speedups for buffer read/write/verify
- *
- * NDFC allows 32bit read/write of data. So we can speed up the buffer
- * functions. No further checking, as nand_base will always read/write
- * page aligned.
- */
-static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtd_to_nand(mtdinfo);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-	uint32_t *p = (uint32_t *) buf;
-
-	for (;len > 0; len -= 4)
-		*p++ = in_be32((u32 *)(base + NDFC_DATA));
-}
-
-/*
- * Don't use these speedup functions in NAND boot image, since the image
- * has to fit into 4kByte.
- */
-static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtd_to_nand(mtdinfo);
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-	uint32_t *p = (uint32_t *) buf;
-
-	for (; len > 0; len -= 4)
-		out_be32((u32 *)(base + NDFC_DATA), *p++);
-}
-
-/*
- * Read a byte from the NDFC.
- */
-static uint8_t ndfc_read_byte(struct mtd_info *mtd)
-{
-
-	struct nand_chip *chip = mtd_to_nand(mtd);
-
-#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
-	return (uint8_t) readw(chip->IO_ADDR_R);
-#else
-	return readb(chip->IO_ADDR_R);
-#endif
-
-}
-
-void board_nand_select_device(struct nand_chip *nand, int chip)
-{
-	/*
-	 * Don't use "chip" to address the NAND device,
-	 * generate the cs from the address where it is encoded.
-	 */
-	ulong base = (ulong)nand->IO_ADDR_W & 0xffffff00;
-	int cs = ndfc_cs[chip];
-
-	/* Set NandFlash Core Configuration Register */
-	/* 1 col x 2 rows */
-	out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24));
-	out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), CONFIG_SYS_NAND_BCR);
-}
-
-static void ndfc_select_chip(struct mtd_info *mtd, int chip)
-{
-	/*
-	 * Nothing to do here!
-	 */
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	int cs = (ulong)nand->IO_ADDR_W & 0x00000003;
-	ulong base = (ulong)nand->IO_ADDR_W & 0xffffff00;
-	static int chip = 0;
-
-	/*
-	 * Save chip-select for this chip #
-	 */
-	ndfc_cs[chip] = cs;
-
-	/*
-	 * Select required NAND chip in NDFC
-	 */
-	board_nand_select_device(nand, chip);
-
-	nand->IO_ADDR_R = (void __iomem *)(base + NDFC_DATA);
-	nand->IO_ADDR_W = (void __iomem *)(base + NDFC_DATA);
-	nand->cmd_ctrl = ndfc_hwcontrol;
-	nand->chip_delay = 50;
-	nand->read_buf = ndfc_read_buf;
-	nand->dev_ready = ndfc_dev_ready;
-	nand->ecc.correct = nand_correct_data;
-	nand->ecc.hwctl = ndfc_enable_hwecc;
-	nand->ecc.calculate = ndfc_calculate_ecc;
-	nand->ecc.mode = NAND_ECC_HW;
-	nand->ecc.size = 256;
-	nand->ecc.bytes = 3;
-	nand->ecc.strength = 1;
-	nand->select_chip = ndfc_select_chip;
-
-#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
-	nand->options |= NAND_BUSWIDTH_16;
-#endif
-
-	nand->write_buf  = ndfc_write_buf;
-	nand->read_byte = ndfc_read_byte;
-
-	chip++;
-
-	return 0;
-}
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 3606585c05..0ae6ec77c5 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1335,7 +1335,6 @@ CONFIG_MSHC_FREQ
 CONFIG_MTD_CONCAT
 CONFIG_MTD_DEVICE
 CONFIG_MTD_ECC_SOFT
-CONFIG_MTD_NAND_ECC_SMC
 CONFIG_MTD_NAND_MUSEUM_IDS
 CONFIG_MTD_NAND_VERIFY_WRITE
 CONFIG_MTD_ONENAND_VERIFY_WRITE
@@ -1416,7 +1415,6 @@ CONFIG_NAND_LPC32XX_MLC
 CONFIG_NAND_LPC32XX_SLC
 CONFIG_NAND_MODE_REG
 CONFIG_NAND_MXC_V1_1
-CONFIG_NAND_NDFC
 CONFIG_NAND_OMAP_ECCSCHEME
 CONFIG_NAND_OMAP_GPMC_WSCFG
 CONFIG_NAND_SECBOOT
-- 
2.16.2

[U-Boot] [PATCH 3/4] pci: Remove unused ppc4xx variable from struct pci_controller

[Stefan Roese]

ppc4xx support was removed some time ago. Lets remove the now unused
"pci_fb" variable from "struct pci_controller" as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
---
 include/pci.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/pci.h b/include/pci.h
index 7adc04301c..31dc7608a7 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -585,8 +585,6 @@ struct pci_controller {
 	/* Used by auto config */
 	struct pci_region *pci_mem, *pci_io, *pci_prefetch;
 
-	/* Used by ppc405 autoconfig*/
-	struct pci_region *pci_fb;
 #ifndef CONFIG_DM_PCI
 	int current_busno;
 
-- 
2.16.2

[U-Boot] [PATCH 4/4] MAINTAINERS: Remove unused ppc4xx entry

[Stefan Roese]

ppc4xx support was removed some time ago. Lets remove the now unused
entry in MAINTAINERS as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
---
 MAINTAINERS | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index d5059f611d..dd9df8fd07 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -426,12 +426,6 @@ S:	Maintained
 T:	git git://git.denx.de/u-boot-mpc86xx.git
 F:	arch/powerpc/cpu/mpc86xx/
 
-POWERPC PPC4XX
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-T:	git git://git.denx.de/u-boot-ppc4xx.git
-F:	arch/powerpc/cpu/ppc4xx/
-
 RISC-V
 M:	Rick Chen <rick@andestech.com>
 S:	Maintained
-- 
2.16.2

[U-Boot] [PATCH 1/4] usb: Remove unused ppc4xx EHCI host driver

[Marek Vasut]

On 03/13/2018 08:41 AM, Stefan Roese wrote:
> ppc4xx support was removed some time ago. Lets remove the now unused
> EHCI driver and all its references for this platform as well.
> 
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
> Cc: Marek Vasut <marex@denx.de>

Sad ... applied, thanks

-- 
Best regards,
Marek Vasut

[U-Boot] [U-Boot, 2/4] nand: Remove unused ppc4xx NAND driver and references

[Tom Rini]

On Tue, Mar 13, 2018 at 08:41:08AM +0100, Stefan Roese wrote:

> ppc4xx support was removed some time ago. Lets remove the now unused
> NAND driver and all its references for this platform as well.
> 
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
> Cc: Scott Wood <oss@buserror.net>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180319/05af57f7/attachment.sig>

[U-Boot] [U-Boot, 3/4] pci: Remove unused ppc4xx variable from struct pci_controller

[Tom Rini]

On Tue, Mar 13, 2018 at 08:41:09AM +0100, Stefan Roese wrote:

> ppc4xx support was removed some time ago. Lets remove the now unused
> "pci_fb" variable from "struct pci_controller" as well.
> 
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Bin Meng <bmeng.cn@gmail.com>
> Cc: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180319/64039219/attachment.sig>

[U-Boot] [U-Boot,4/4] MAINTAINERS: Remove unused ppc4xx entry

[Tom Rini]

On Tue, Mar 13, 2018 at 08:41:10AM +0100, Stefan Roese wrote:

> ppc4xx support was removed some time ago. Lets remove the now unused
> entry in MAINTAINERS as well.
> 
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180319/95a1abe7/attachment.sig>