From: Razvan Stefanescu <razvan.stefanescu@nxp.com> To: gregkh@linuxfoundation.org Cc: devel@driverdev.osuosl.org, arnd@arndb.de, netdev@vger.kernel.org, alexandru.marginean@nxp.com, linux-kernel@vger.kernel.org, agraf@suse.de, stuyoder@gmail.com, ioana.ciornei@nxp.com, laurentiu.tudor@nxp.com Subject: [PATCH v5 6/6] staging: fsl-dpaa2/ethsw: Add TODO Date: Tue, 13 Mar 2018 08:51:56 -0500 [thread overview] Message-ID: <20180313135156.3322-7-razvan.stefanescu@nxp.com> (raw) In-Reply-To: <20180313135156.3322-1-razvan.stefanescu@nxp.com> Add a TODO file describing what needs to be added/changed before the driver can be moved out of staging. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com> --- Changelog: v2: - no changes v3: - no changes v4: - remove fsl-mc bus driver dependency as it is out of staging v5: - no changes drivers/staging/fsl-dpaa2/ethsw/TODO | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 drivers/staging/fsl-dpaa2/ethsw/TODO diff --git a/drivers/staging/fsl-dpaa2/ethsw/TODO b/drivers/staging/fsl-dpaa2/ethsw/TODO new file mode 100644 index 0000000..d186875 --- /dev/null +++ b/drivers/staging/fsl-dpaa2/ethsw/TODO @@ -0,0 +1,13 @@ +* Add I/O capabilities on switch port netdevices. This will allow control +traffic to reach the CPU. +* Add ACL to redirect control traffic to CPU. +* Add support for displaying learned FDB entries +* MC firmware uprev; the DPAA2 objects used by the Ethernet Switch driver +need to be kept in sync with binary interface changes in MC +* refine README file +* cleanup + +NOTE: At least first three of the above are required before getting the +DPAA2 Ethernet Switch driver out of staging. Another requirement is that +dpio driver is moved to drivers/soc (this is required for I/O). + -- 1.9.1 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
WARNING: multiple messages have this Message-ID (diff)
From: Razvan Stefanescu <razvan.stefanescu@nxp.com> To: gregkh@linuxfoundation.org Cc: devel@driverdev.osuosl.org, arnd@arndb.de, netdev@vger.kernel.org, alexandru.marginean@nxp.com, linux-kernel@vger.kernel.org, agraf@suse.de, stuyoder@gmail.com, ioana.ciornei@nxp.com, laurentiu.tudor@nxp.com Subject: [PATCH v5 6/6] staging: fsl-dpaa2/ethsw: Add TODO Date: Tue, 13 Mar 2018 08:51:56 -0500 [thread overview] Message-ID: <20180313135156.3322-7-razvan.stefanescu@nxp.com> (raw) In-Reply-To: <20180313135156.3322-1-razvan.stefanescu@nxp.com> Add a TODO file describing what needs to be added/changed before the driver can be moved out of staging. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com> --- Changelog: v2: - no changes v3: - no changes v4: - remove fsl-mc bus driver dependency as it is out of staging v5: - no changes drivers/staging/fsl-dpaa2/ethsw/TODO | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 drivers/staging/fsl-dpaa2/ethsw/TODO diff --git a/drivers/staging/fsl-dpaa2/ethsw/TODO b/drivers/staging/fsl-dpaa2/ethsw/TODO new file mode 100644 index 0000000..d186875 --- /dev/null +++ b/drivers/staging/fsl-dpaa2/ethsw/TODO @@ -0,0 +1,13 @@ +* Add I/O capabilities on switch port netdevices. This will allow control +traffic to reach the CPU. +* Add ACL to redirect control traffic to CPU. +* Add support for displaying learned FDB entries +* MC firmware uprev; the DPAA2 objects used by the Ethernet Switch driver +need to be kept in sync with binary interface changes in MC +* refine README file +* cleanup + +NOTE: At least first three of the above are required before getting the +DPAA2 Ethernet Switch driver out of staging. Another requirement is that +dpio driver is moved to drivers/soc (this is required for I/O). + -- 1.9.1
next prev parent reply other threads:[~2018-03-13 13:51 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-03-13 13:51 [PATCH v5 0/6] staging: Introduce DPAA2 Ethernet Switch driver Razvan Stefanescu 2018-03-13 13:51 ` Razvan Stefanescu 2018-03-13 13:51 ` [PATCH v5 1/6] staging: fsl-dpaa2/ethsw: Add APIs for DPSW object Razvan Stefanescu 2018-03-13 13:51 ` Razvan Stefanescu 2018-03-14 12:17 ` Greg KH 2018-03-14 12:17 ` Greg KH 2018-03-14 14:30 ` Razvan Stefanescu 2018-03-13 13:51 ` [PATCH v5 2/6] staging: fsl-dpaa2/ethsw: Add Freescale DPAA2 Ethernet Switch driver Razvan Stefanescu 2018-03-13 13:51 ` Razvan Stefanescu 2018-03-13 14:22 ` Andrew Lunn 2018-03-13 14:22 ` Andrew Lunn 2018-03-13 15:20 ` Razvan Stefanescu 2018-03-13 15:20 ` Razvan Stefanescu 2018-03-13 15:26 ` Andrew Lunn 2018-03-13 15:26 ` Andrew Lunn 2018-03-14 14:27 ` Razvan Stefanescu 2018-03-13 13:51 ` [PATCH v5 3/6] staging: fsl-dpaa2/ethsw: Add ethtool support Razvan Stefanescu 2018-03-13 13:51 ` Razvan Stefanescu 2018-03-13 13:51 ` [PATCH v5 4/6] staging: fsl-dpaa2/ethsw: Add maintainer for Ethernet Switch driver Razvan Stefanescu 2018-03-13 13:51 ` Razvan Stefanescu 2018-03-13 13:51 ` [PATCH v5 5/6] staging: fsl-dpaa2/ethsw: Add README Razvan Stefanescu 2018-03-13 13:51 ` Razvan Stefanescu 2018-03-13 13:51 ` Razvan Stefanescu [this message] 2018-03-13 13:51 ` [PATCH v5 6/6] staging: fsl-dpaa2/ethsw: Add TODO Razvan Stefanescu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180313135156.3322-7-razvan.stefanescu@nxp.com \ --to=razvan.stefanescu@nxp.com \ --cc=agraf@suse.de \ --cc=alexandru.marginean@nxp.com \ --cc=arnd@arndb.de \ --cc=devel@driverdev.osuosl.org \ --cc=gregkh@linuxfoundation.org \ --cc=ioana.ciornei@nxp.com \ --cc=laurentiu.tudor@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=netdev@vger.kernel.org \ --cc=stuyoder@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.