From: Richard Leitner <dev@g0hl1n.net> To: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org Cc: gregkh@linuxfoundation.org, mathias.nyman@intel.com, bhelgaas@google.com, richard.leitner@skidata.com Subject: [PATCH 1/3] usb: host: pci: use existing Intel PCI ID macros Date: Wed, 14 Mar 2018 11:29:31 +0100 [thread overview] Message-ID: <20180314102933.21367-2-dev@g0hl1n.net> (raw) In-Reply-To: <20180314102933.21367-1-dev@g0hl1n.net> From: Richard Leitner <richard.leitner@skidata.com> Instead of the hardcoded hexadecimal PCI IDs use the existing macros from pci_ids.h for Intel IDs. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> --- drivers/usb/host/pci-quirks.c | 10 +++++----- drivers/usb/host/xhci-pci.c | 3 ++- include/linux/pci_ids.h | 1 + 3 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 67ad4bb6919a..4f4a9f36a68e 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -858,8 +858,8 @@ static void ehci_bios_handoff(struct pci_dev *pdev, * * The HASEE E200 hangs when the semaphore is set (bugzilla #77021). */ - if (pdev->vendor == 0x8086 && (pdev->device == 0x283a || - pdev->device == 0x27cc)) { + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == 0x283a || pdev->device == 0x27cc)) { if (dmi_check_system(ehci_dmi_nohandoff_table)) try_handoff = 0; } @@ -1168,9 +1168,9 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) val = readl(base + ext_cap_offset); /* Auto handoff never worked for these devices. Force it and continue */ - if ((pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) || - (pdev->vendor == PCI_VENDOR_ID_RENESAS - && pdev->device == 0x0014)) { + if ((pdev->vendor == PCI_VENDOR_ID_TI && + pdev->device == PCI_DEVICE_ID_TI_TUSB73X0) || + (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0014)) { val = (val | XHCI_HC_OS_OWNED) & ~XHCI_HC_BIOS_OWNED; writel(val, base + ext_cap_offset); } diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 5262fa571a5d..a5bfd890190c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -213,7 +213,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL; - if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) + if (pdev->vendor == PCI_VENDOR_ID_TI && + pdev->device == PCI_DEVICE_ID_TI_TUSB73X0) xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; if (xhci->quirks & XHCI_RESET_ON_RESUME) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index a6b30667a331..e8d1af82a688 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -838,6 +838,7 @@ #define PCI_DEVICE_ID_TI_XX12 0x8039 #define PCI_DEVICE_ID_TI_XX12_FM 0x803b #define PCI_DEVICE_ID_TI_XIO2000A 0x8231 +#define PCI_DEVICE_ID_TI_TUSB73X0 0x8241 #define PCI_DEVICE_ID_TI_1130 0xac12 #define PCI_DEVICE_ID_TI_1031 0xac13 #define PCI_DEVICE_ID_TI_1131 0xac15 -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Richard Leitner <dev@g0hl1n.net> To: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org Cc: gregkh@linuxfoundation.org, mathias.nyman@intel.com, bhelgaas@google.com, richard.leitner@skidata.com Subject: [1/3] usb: host: pci: use existing Intel PCI ID macros Date: Wed, 14 Mar 2018 11:29:31 +0100 [thread overview] Message-ID: <20180314102933.21367-2-dev@g0hl1n.net> (raw) From: Richard Leitner <richard.leitner@skidata.com> Instead of the hardcoded hexadecimal PCI IDs use the existing macros from pci_ids.h for Intel IDs. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> --- drivers/usb/host/pci-quirks.c | 10 +++++----- drivers/usb/host/xhci-pci.c | 3 ++- include/linux/pci_ids.h | 1 + 3 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 67ad4bb6919a..4f4a9f36a68e 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -858,8 +858,8 @@ static void ehci_bios_handoff(struct pci_dev *pdev, * * The HASEE E200 hangs when the semaphore is set (bugzilla #77021). */ - if (pdev->vendor == 0x8086 && (pdev->device == 0x283a || - pdev->device == 0x27cc)) { + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == 0x283a || pdev->device == 0x27cc)) { if (dmi_check_system(ehci_dmi_nohandoff_table)) try_handoff = 0; } @@ -1168,9 +1168,9 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) val = readl(base + ext_cap_offset); /* Auto handoff never worked for these devices. Force it and continue */ - if ((pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) || - (pdev->vendor == PCI_VENDOR_ID_RENESAS - && pdev->device == 0x0014)) { + if ((pdev->vendor == PCI_VENDOR_ID_TI && + pdev->device == PCI_DEVICE_ID_TI_TUSB73X0) || + (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0014)) { val = (val | XHCI_HC_OS_OWNED) & ~XHCI_HC_BIOS_OWNED; writel(val, base + ext_cap_offset); } diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 5262fa571a5d..a5bfd890190c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -213,7 +213,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL; - if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) + if (pdev->vendor == PCI_VENDOR_ID_TI && + pdev->device == PCI_DEVICE_ID_TI_TUSB73X0) xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; if (xhci->quirks & XHCI_RESET_ON_RESUME) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index a6b30667a331..e8d1af82a688 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -838,6 +838,7 @@ #define PCI_DEVICE_ID_TI_XX12 0x8039 #define PCI_DEVICE_ID_TI_XX12_FM 0x803b #define PCI_DEVICE_ID_TI_XIO2000A 0x8231 +#define PCI_DEVICE_ID_TI_TUSB73X0 0x8241 #define PCI_DEVICE_ID_TI_1130 0xac12 #define PCI_DEVICE_ID_TI_1031 0xac13 #define PCI_DEVICE_ID_TI_1131 0xac15
next prev parent reply other threads:[~2018-03-14 10:29 UTC|newest] Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-03-14 10:29 [PATCH 0/3] usb: host: pci: PCI ID consolidation Richard Leitner 2018-03-14 10:29 ` Richard Leitner [this message] 2018-03-14 10:29 ` [1/3] usb: host: pci: use existing Intel PCI ID macros Richard Leitner 2018-03-14 10:48 ` [PATCH 1/3] " Greg KH 2018-03-14 10:48 ` [1/3] " Greg Kroah-Hartman 2018-03-14 10:29 ` [PATCH 2/3] usb: host: pci: introduce PCI vendor ID for Netlogic Richard Leitner 2018-03-14 10:29 ` [2/3] " Richard Leitner 2018-03-14 10:48 ` [PATCH 2/3] " Greg KH 2018-03-14 10:48 ` [2/3] " Greg Kroah-Hartman 2018-03-14 11:36 ` [PATCH 2/3] " Richard Leitner 2018-03-14 11:36 ` [2/3] " Richard Leitner 2018-03-14 11:49 ` [PATCH 2/3] " Greg KH 2018-03-14 11:49 ` [2/3] " Greg Kroah-Hartman 2018-03-14 12:17 ` [PATCH 2/3] " Oliver Neukum 2018-03-14 12:17 ` [2/3] " Oliver Neukum 2018-03-14 13:31 ` [PATCH 2/3] " Richard Leitner 2018-03-14 13:31 ` [2/3] " Richard Leitner 2018-03-14 15:27 ` [PATCH 2/3] " Oliver Neukum 2018-03-14 15:27 ` [2/3] " Oliver Neukum 2018-03-14 15:44 ` [PATCH 2/3] " Richard Leitner 2018-03-14 15:44 ` [2/3] " Richard Leitner 2018-03-15 9:26 ` [PATCH 2/3] " Oliver Neukum 2018-03-15 9:26 ` [2/3] " Oliver Neukum 2018-03-15 9:47 ` [PATCH 2/3] " Richard Leitner 2018-03-15 9:47 ` [2/3] " Richard Leitner 2018-03-14 10:29 ` [PATCH 3/3] usb: host: pci: replace hardcoded renesas PCI IDs Richard Leitner 2018-03-14 10:29 ` [3/3] " Richard Leitner 2018-03-14 10:49 ` [PATCH 3/3] " Greg KH 2018-03-14 10:49 ` [3/3] " Greg Kroah-Hartman 2018-03-14 11:38 ` [PATCH 3/3] " Richard Leitner 2018-03-14 11:38 ` [3/3] " Richard Leitner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180314102933.21367-2-dev@g0hl1n.net \ --to=dev@g0hl1n.net \ --cc=bhelgaas@google.com \ --cc=gregkh@linuxfoundation.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=mathias.nyman@intel.com \ --cc=richard.leitner@skidata.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.