Re: [PATCH v7] ARM: shmobile: Add watchdog support

[Simon Horman <horms@verge.net.au>]

On Wed, Mar 14, 2018 at 11:13:53AM +0000, Fabrizio Castro wrote:
> On R-Car Gen2 and RZ/G1 platforms, we use the SBAR registers to make non
> boot CPUs run a routine designed to bring up SMP and deal with hot plug.
> The value contained in the SBAR registers is not initialized by a WDT
> triggered reset, which means that after a WDT triggered reset we jump
> to the SMP bring up routine, preventing the system from executing the
> bootrom code.
> 
> The purpose of this patch is to jump to the bootrom code in case of a
> WDT triggered reset, and keep the SMP functionality untouched.
> In order to tell if the code had been called due to the WDT overflowing
> we are testing WOVF from register RWTCSRA.
> 
> The new function shmobile_boot_vector_gen2 isn't replacing
> shmobile_boot_vector for backward compatibility reasons. The kernel
> will install the best option (either shmobile_boot_vector or
> shmobile_boot_vector_gen2) to ICRAM1 after parsing the device tree,
> according to the amount of memory available.
> 
> Since shmobile_boot_vector has become bigger, "reg" property of nodes
> compatible with "renesas,smp-sram" now need to be set to a value
> greater or equal to "<0 0x60>".
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v6->v7:
> * restored ifdef within arch/arm/mach-shmobile/headsmp.S

Thanks. I believe that this is the same as the hand modified
version of v5 that I applied yesterday.