* [Buildroot] [PATCH 2/4] configs/raspberrypi*: bump kernel version
2018-03-15 13:24 [Buildroot] [PATCH 1/4] package/rpi-firmware: bump version Martin Bark
@ 2018-03-15 13:24 ` Martin Bark
2018-03-15 13:24 ` [Buildroot] [PATCH 3/4] board/raspberrypi: add support for rpi3 b+ Martin Bark
` (2 subsequent siblings)
3 siblings, 0 replies; 17+ messages in thread
From: Martin Bark @ 2018-03-15 13:24 UTC (permalink / raw)
To: buildroot
Now based on 4.9.80 (from 4.9.79)
Signed-off-by: Martin Bark <martin@barkynet.com>
---
configs/raspberrypi0_defconfig | 2 +-
configs/raspberrypi2_defconfig | 2 +-
configs/raspberrypi3_64_defconfig | 2 +-
configs/raspberrypi3_defconfig | 2 +-
configs/raspberrypi3_qt5we_defconfig | 2 +-
configs/raspberrypi_defconfig | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/configs/raspberrypi0_defconfig b/configs/raspberrypi0_defconfig
index 0fb8a99..68448e6 100644
--- a/configs/raspberrypi0_defconfig
+++ b/configs/raspberrypi0_defconfig
@@ -10,7 +10,7 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a00afce9b4231c120c8b007d2c48018547d0156f"
BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
# Build the DTBs for A/B from the kernel sources: the zero is the same
diff --git a/configs/raspberrypi2_defconfig b/configs/raspberrypi2_defconfig
index 962a58c..7e7a61a 100644
--- a/configs/raspberrypi2_defconfig
+++ b/configs/raspberrypi2_defconfig
@@ -13,7 +13,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a00afce9b4231c120c8b007d2c48018547d0156f"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
# Build the DTB from the kernel sources
diff --git a/configs/raspberrypi3_64_defconfig b/configs/raspberrypi3_64_defconfig
index 6a35ac3..7db5561 100644
--- a/configs/raspberrypi3_64_defconfig
+++ b/configs/raspberrypi3_64_defconfig
@@ -12,7 +12,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a00afce9b4231c120c8b007d2c48018547d0156f"
BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
# Build the DTB from the kernel sources
diff --git a/configs/raspberrypi3_defconfig b/configs/raspberrypi3_defconfig
index 9304f0c..2fb46d3 100644
--- a/configs/raspberrypi3_defconfig
+++ b/configs/raspberrypi3_defconfig
@@ -12,7 +12,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a00afce9b4231c120c8b007d2c48018547d0156f"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
# Build the DTB from the kernel sources
diff --git a/configs/raspberrypi3_qt5we_defconfig b/configs/raspberrypi3_qt5we_defconfig
index d4ada47..dc1bf7f 100644
--- a/configs/raspberrypi3_qt5we_defconfig
+++ b/configs/raspberrypi3_qt5we_defconfig
@@ -13,7 +13,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a00afce9b4231c120c8b007d2c48018547d0156f"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
# Build the DTB from the kernel sources
diff --git a/configs/raspberrypi_defconfig b/configs/raspberrypi_defconfig
index daca836..85312c4 100644
--- a/configs/raspberrypi_defconfig
+++ b/configs/raspberrypi_defconfig
@@ -12,7 +12,7 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a00afce9b4231c120c8b007d2c48018547d0156f"
BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
# Build the DTBs for A/B, A+/B+ and compute module from the kernel sources
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Buildroot] [PATCH 3/4] board/raspberrypi: add support for rpi3 b+
2018-03-15 13:24 [Buildroot] [PATCH 1/4] package/rpi-firmware: bump version Martin Bark
2018-03-15 13:24 ` [Buildroot] [PATCH 2/4] configs/raspberrypi*: bump kernel version Martin Bark
@ 2018-03-15 13:24 ` Martin Bark
2018-03-15 13:33 ` Baruch Siach
2018-03-15 13:24 ` [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files Martin Bark
2018-03-15 19:28 ` [Buildroot] [PATCH 1/4] package/rpi-firmware: bump version Peter Seiderer
3 siblings, 1 reply; 17+ messages in thread
From: Martin Bark @ 2018-03-15 13:24 UTC (permalink / raw)
To: buildroot
Signed-off-by: Martin Bark <martin@barkynet.com>
---
board/raspberrypi/genimage-raspberrypi3.cfg | 1 +
board/raspberrypi/readme.txt | 3 ++-
configs/raspberrypi3_defconfig | 2 +-
configs/raspberrypi3_qt5we_defconfig | 2 +-
4 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/board/raspberrypi/genimage-raspberrypi3.cfg b/board/raspberrypi/genimage-raspberrypi3.cfg
index 98ff709..0a54724 100644
--- a/board/raspberrypi/genimage-raspberrypi3.cfg
+++ b/board/raspberrypi/genimage-raspberrypi3.cfg
@@ -2,6 +2,7 @@ image boot.vfat {
vfat {
files = {
"bcm2710-rpi-3-b.dtb",
+ "bcm2710-rpi-3-b-plus.dtb",
"bcm2710-rpi-cm3.dtb",
"rpi-firmware/bootcode.bin",
"rpi-firmware/cmdline.txt",
diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
index 9482693..9f91581 100644
--- a/board/raspberrypi/readme.txt
+++ b/board/raspberrypi/readme.txt
@@ -30,7 +30,7 @@ For model 2 B:
$ make raspberrypi2_defconfig
-For model 3 B:
+For model 3 B and B+:
$ make raspberrypi3_defconfig
@@ -56,6 +56,7 @@ After building, you should obtain this tree:
+-- bcm2708-rpi-b-plus.dtb [1]
+-- bcm2709-rpi-2-b.dtb [1]
+-- bcm2710-rpi-3-b.dtb [1]
+ +-- bcm2710-rpi-3-b-plus.dtb [1]
+-- boot.vfat
+-- rootfs.ext4
+-- rpi-firmware/
diff --git a/configs/raspberrypi3_defconfig b/configs/raspberrypi3_defconfig
index 2fb46d3..40585da 100644
--- a/configs/raspberrypi3_defconfig
+++ b/configs/raspberrypi3_defconfig
@@ -17,7 +17,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
# Build the DTB from the kernel sources
BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-cm3"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3"
BR2_PACKAGE_RPI_FIRMWARE=y
diff --git a/configs/raspberrypi3_qt5we_defconfig b/configs/raspberrypi3_qt5we_defconfig
index dc1bf7f..7830065 100644
--- a/configs/raspberrypi3_qt5we_defconfig
+++ b/configs/raspberrypi3_qt5we_defconfig
@@ -18,7 +18,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
# Build the DTB from the kernel sources
BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-cm3"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3"
# Build Qt5 WebEngine
BR2_PACKAGE_LIBERATION=y
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Buildroot] [PATCH 3/4] board/raspberrypi: add support for rpi3 b+
2018-03-15 13:24 ` [Buildroot] [PATCH 3/4] board/raspberrypi: add support for rpi3 b+ Martin Bark
@ 2018-03-15 13:33 ` Baruch Siach
2018-03-15 14:07 ` Martin Bark
0 siblings, 1 reply; 17+ messages in thread
From: Baruch Siach @ 2018-03-15 13:33 UTC (permalink / raw)
To: buildroot
Hi Martin,
On Thu, Mar 15, 2018 at 01:24:50PM +0000, Martin Bark wrote:
> diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
> index 9482693..9f91581 100644
> --- a/board/raspberrypi/readme.txt
> +++ b/board/raspberrypi/readme.txt
> @@ -30,7 +30,7 @@ For model 2 B:
>
> $ make raspberrypi2_defconfig
>
> -For model 3 B:
> +For model 3 B and B+:
This is quick. Have you tested on hardware?
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 17+ messages in thread* [Buildroot] [PATCH 3/4] board/raspberrypi: add support for rpi3 b+
2018-03-15 13:33 ` Baruch Siach
@ 2018-03-15 14:07 ` Martin Bark
0 siblings, 0 replies; 17+ messages in thread
From: Martin Bark @ 2018-03-15 14:07 UTC (permalink / raw)
To: buildroot
Hi Baruch,
On 15 March 2018 at 13:33, Baruch Siach <baruch@tkos.co.il> wrote:
> Hi Martin,
>
> On Thu, Mar 15, 2018 at 01:24:50PM +0000, Martin Bark wrote:
>> diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt
>> index 9482693..9f91581 100644
>> --- a/board/raspberrypi/readme.txt
>> +++ b/board/raspberrypi/readme.txt
>> @@ -30,7 +30,7 @@ For model 2 B:
>>
>> $ make raspberrypi2_defconfig
>>
>> -For model 3 B:
>> +For model 3 B and B+:
>
> This is quick. Have you tested on hardware?
I've testing it builds and runs on the rpi3 but not tested on a
rpi3b+. I should get my rpi3b+ soon to verify this. The current
kernel includes all the changes needed for the rpi3b+. To add support
we just need to include the bcm2710-rpi-3-b-plus.dtb.
Note that i don't see any updates to the arm64 defconfig for dtb files
so raspberrypi3_64_defconfig will remain unchanged for now.
Thanks
Martin
>
> baruch
>
> --
> http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
> =}------------------------------------------------ooO--U--Ooo------------{=
> - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files
2018-03-15 13:24 [Buildroot] [PATCH 1/4] package/rpi-firmware: bump version Martin Bark
2018-03-15 13:24 ` [Buildroot] [PATCH 2/4] configs/raspberrypi*: bump kernel version Martin Bark
2018-03-15 13:24 ` [Buildroot] [PATCH 3/4] board/raspberrypi: add support for rpi3 b+ Martin Bark
@ 2018-03-15 13:24 ` Martin Bark
2018-03-15 19:40 ` Peter Seiderer
2018-03-15 19:28 ` [Buildroot] [PATCH 1/4] package/rpi-firmware: bump version Peter Seiderer
3 siblings, 1 reply; 17+ messages in thread
From: Martin Bark @ 2018-03-15 13:24 UTC (permalink / raw)
To: buildroot
Don't list specific dtb files, instead install all dtb files in the same
way as dtbo files are currently done.
Signed-off-by: Martin Bark <martin@barkynet.com>
---
package/rpi-firmware/rpi-firmware.mk | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
index 1ebdd96..9cc3d4a 100644
--- a/package/rpi-firmware/rpi-firmware.mk
+++ b/package/rpi-firmware/rpi-firmware.mk
@@ -12,10 +12,9 @@ RPI_FIRMWARE_INSTALL_IMAGES = YES
ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
define RPI_FIRMWARE_INSTALL_DTB
- $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b.dtb
- $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b-plus.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b-plus.dtb
- $(INSTALL) -D -m 0644 $(@D)/boot/bcm2709-rpi-2-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2709-rpi-2-b.dtb
- $(INSTALL) -D -m 0644 $(@D)/boot/bcm2710-rpi-3-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2710-rpi-3-b.dtb
+ for dtb in $(@D)/boot/*.dtb; do \
+ $(INSTALL) -D -m 0644 $${dtb} $(BINARIES_DIR)/rpi-firmware/$${dtb##*/} || exit 1; \
+ done
endef
endif
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files
2018-03-15 13:24 ` [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files Martin Bark
@ 2018-03-15 19:40 ` Peter Seiderer
2018-03-15 19:58 ` Martin Bark
0 siblings, 1 reply; 17+ messages in thread
From: Peter Seiderer @ 2018-03-15 19:40 UTC (permalink / raw)
To: buildroot
Hello Martin,
On Thu, 15 Mar 2018 13:24:51 +0000, Martin Bark <martin@barkynet.com> wrote:
> Don't list specific dtb files, instead install all dtb files in the same
> way as dtbo files are currently done.
>
> Signed-off-by: Martin Bark <martin@barkynet.com>
> ---
> package/rpi-firmware/rpi-firmware.mk | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
> index 1ebdd96..9cc3d4a 100644
> --- a/package/rpi-firmware/rpi-firmware.mk
> +++ b/package/rpi-firmware/rpi-firmware.mk
> @@ -12,10 +12,9 @@ RPI_FIRMWARE_INSTALL_IMAGES = YES
>
> ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
> define RPI_FIRMWARE_INSTALL_DTB
> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b.dtb
> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b-plus.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b-plus.dtb
> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2709-rpi-2-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2709-rpi-2-b.dtb
> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2710-rpi-3-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2710-rpi-3-b.dtb
> + for dtb in $(@D)/boot/*.dtb; do \
> + $(INSTALL) -D -m 0644 $${dtb} $(BINARIES_DIR)/rpi-firmware/$${dtb##*/} || exit 1; \
> + done
Which will install three additional dtb files (bcm2708-rpi-0-w.dtb,
bcm2708-rpi-cm.dtb and bcm2710-rpi-cm3.dtb), not a downside of the
patch, but worth mentioning....
Regards,
Peter
> endef
> endif
>
^ permalink raw reply [flat|nested] 17+ messages in thread* [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files
2018-03-15 19:40 ` Peter Seiderer
@ 2018-03-15 19:58 ` Martin Bark
2018-03-15 21:59 ` Yann E. MORIN
0 siblings, 1 reply; 17+ messages in thread
From: Martin Bark @ 2018-03-15 19:58 UTC (permalink / raw)
To: buildroot
Hi Peter,
On 15 March 2018 at 19:40, Peter Seiderer <ps.report@gmx.net> wrote:
> Hello Martin,
>
> On Thu, 15 Mar 2018 13:24:51 +0000, Martin Bark <martin@barkynet.com> wrote:
>
>> Don't list specific dtb files, instead install all dtb files in the same
>> way as dtbo files are currently done.
>>
>> Signed-off-by: Martin Bark <martin@barkynet.com>
>> ---
>> package/rpi-firmware/rpi-firmware.mk | 7 +++----
>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
>> index 1ebdd96..9cc3d4a 100644
>> --- a/package/rpi-firmware/rpi-firmware.mk
>> +++ b/package/rpi-firmware/rpi-firmware.mk
>> @@ -12,10 +12,9 @@ RPI_FIRMWARE_INSTALL_IMAGES = YES
>>
>> ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
>> define RPI_FIRMWARE_INSTALL_DTB
>> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b.dtb
>> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b-plus.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b-plus.dtb
>> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2709-rpi-2-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2709-rpi-2-b.dtb
>> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2710-rpi-3-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2710-rpi-3-b.dtb
>> + for dtb in $(@D)/boot/*.dtb; do \
>> + $(INSTALL) -D -m 0644 $${dtb} $(BINARIES_DIR)/rpi-firmware/$${dtb##*/} || exit 1; \
>> + done
>
> Which will install three additional dtb files (bcm2708-rpi-0-w.dtb,
> bcm2708-rpi-cm.dtb and bcm2710-rpi-cm3.dtb), not a downside of the
> patch, but worth mentioning....
Yes, it will also install the new bcm2710-rpi-3-b-plus.dtb. This code
does not seem to have been kept updated, it's missing several dtb
files as you mention. I think it's better to just install all dtb
files as we do for the dtbo files.
Thanks
Martin
>
> Regards,
> Peter
>
>> endef
>> endif
>>
>
^ permalink raw reply [flat|nested] 17+ messages in thread* [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files
2018-03-15 19:58 ` Martin Bark
@ 2018-03-15 21:59 ` Yann E. MORIN
2018-03-15 22:40 ` Martin Bark
0 siblings, 1 reply; 17+ messages in thread
From: Yann E. MORIN @ 2018-03-15 21:59 UTC (permalink / raw)
To: buildroot
Martin, All,
On 2018-03-15 19:58 +0000, Martin Bark spake thusly:
> On 15 March 2018 at 19:40, Peter Seiderer <ps.report@gmx.net> wrote:
> > On Thu, 15 Mar 2018 13:24:51 +0000, Martin Bark <martin@barkynet.com> wrote:
> >> Don't list specific dtb files, instead install all dtb files in the same
> >> way as dtbo files are currently done.
> >>
> >> Signed-off-by: Martin Bark <martin@barkynet.com>
> >> ---
> >> package/rpi-firmware/rpi-firmware.mk | 7 +++----
> >> 1 file changed, 3 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
> >> index 1ebdd96..9cc3d4a 100644
> >> --- a/package/rpi-firmware/rpi-firmware.mk
> >> +++ b/package/rpi-firmware/rpi-firmware.mk
> >> @@ -12,10 +12,9 @@ RPI_FIRMWARE_INSTALL_IMAGES = YES
> >>
> >> ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
> >> define RPI_FIRMWARE_INSTALL_DTB
> >> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b.dtb
> >> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b-plus.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b-plus.dtb
> >> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2709-rpi-2-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2709-rpi-2-b.dtb
> >> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2710-rpi-3-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2710-rpi-3-b.dtb
> >> + for dtb in $(@D)/boot/*.dtb; do \
> >> + $(INSTALL) -D -m 0644 $${dtb} $(BINARIES_DIR)/rpi-firmware/$${dtb##*/} || exit 1; \
> >> + done
> >
> > Which will install three additional dtb files (bcm2708-rpi-0-w.dtb,
> > bcm2708-rpi-cm.dtb and bcm2710-rpi-cm3.dtb), not a downside of the
> > patch, but worth mentioning....
>
> Yes, it will also install the new bcm2710-rpi-3-b-plus.dtb. This code
> does not seem to have been kept updated, it's missing several dtb
> files as you mention. I think it's better to just install all dtb
> files as we do for the dtbo files.
I wonder if we should not just drop BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
now the rpi dtbs are now supposed to be in the kernel snce at least 3.19.
Besids, all our rpi defconfig are using the DT from the kernel, which is
another good indication that we don't need those from rpi-firmware
anymore...
If it is not yet in the kernel, it is just a matter of time before it is
available there...
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 17+ messages in thread* [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files
2018-03-15 21:59 ` Yann E. MORIN
@ 2018-03-15 22:40 ` Martin Bark
2018-03-16 9:32 ` Jens Maus
0 siblings, 1 reply; 17+ messages in thread
From: Martin Bark @ 2018-03-15 22:40 UTC (permalink / raw)
To: buildroot
Yann,
On 15 March 2018 at 21:59, Yann E. MORIN <yann.morin.1998@free.fr> wrote:
> Martin, All,
>
> On 2018-03-15 19:58 +0000, Martin Bark spake thusly:
>> On 15 March 2018 at 19:40, Peter Seiderer <ps.report@gmx.net> wrote:
>> > On Thu, 15 Mar 2018 13:24:51 +0000, Martin Bark <martin@barkynet.com> wrote:
>> >> Don't list specific dtb files, instead install all dtb files in the same
>> >> way as dtbo files are currently done.
>> >>
>> >> Signed-off-by: Martin Bark <martin@barkynet.com>
>> >> ---
>> >> package/rpi-firmware/rpi-firmware.mk | 7 +++----
>> >> 1 file changed, 3 insertions(+), 4 deletions(-)
>> >>
>> >> diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
>> >> index 1ebdd96..9cc3d4a 100644
>> >> --- a/package/rpi-firmware/rpi-firmware.mk
>> >> +++ b/package/rpi-firmware/rpi-firmware.mk
>> >> @@ -12,10 +12,9 @@ RPI_FIRMWARE_INSTALL_IMAGES = YES
>> >>
>> >> ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
>> >> define RPI_FIRMWARE_INSTALL_DTB
>> >> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b.dtb
>> >> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b-plus.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b-plus.dtb
>> >> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2709-rpi-2-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2709-rpi-2-b.dtb
>> >> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2710-rpi-3-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2710-rpi-3-b.dtb
>> >> + for dtb in $(@D)/boot/*.dtb; do \
>> >> + $(INSTALL) -D -m 0644 $${dtb} $(BINARIES_DIR)/rpi-firmware/$${dtb##*/} || exit 1; \
>> >> + done
>> >
>> > Which will install three additional dtb files (bcm2708-rpi-0-w.dtb,
>> > bcm2708-rpi-cm.dtb and bcm2710-rpi-cm3.dtb), not a downside of the
>> > patch, but worth mentioning....
>>
>> Yes, it will also install the new bcm2710-rpi-3-b-plus.dtb. This code
>> does not seem to have been kept updated, it's missing several dtb
>> files as you mention. I think it's better to just install all dtb
>> files as we do for the dtbo files.
>
> I wonder if we should not just drop BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
> now the rpi dtbs are now supposed to be in the kernel snce at least 3.19.
Yes it would be good to remove this. It would also be good to remove
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS and have them built as
part of the kernel. Really only the booloader and /op/vc code is
needed from rpi-firmware.
Thanks
Martin
>
> Besids, all our rpi defconfig are using the DT from the kernel, which is
> another good indication that we don't need those from rpi-firmware
> anymore...
>
> If it is not yet in the kernel, it is just a matter of time before it is
> available there...
>
> Regards,
> Yann E. MORIN.
>
> --
> .-----------------.--------------------.------------------.--------------------.
> | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
> | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
> '------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 17+ messages in thread* [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files
2018-03-15 22:40 ` Martin Bark
@ 2018-03-16 9:32 ` Jens Maus
2018-03-16 10:52 ` Martin Bark
0 siblings, 1 reply; 17+ messages in thread
From: Jens Maus @ 2018-03-16 9:32 UTC (permalink / raw)
To: buildroot
BTW: As you seem to push updates regarding Pi3+ I have some more patches at hand for you :)
https://github.com/jens-maus/RaspberryMatic/blob/master/buildroot-patches/0003-rpi-wifi-firmware.patch
https://github.com/jens-maus/RaspberryMatic/blob/master/buildroot-patches/0004-wiringpi.patch
The first is to actually get WiFi working again because the NVRAM settings file is different for the new WiFi chip of the Pi3+. The second updates the wiringpi package to the latest master version which fixes compatibility to the Pi3+.
Sorry that I am not able to submit these patches myself via patchwork to buildroot, but my time is unfortunately limited these days. However, feel free to submit these patches yourself.
Regards,
Jens
> Am 15.03.2018 um 23:40 schrieb Martin Bark <martin@barkynet.com>:
>
> Yann,
>
> On 15 March 2018 at 21:59, Yann E. MORIN <yann.morin.1998@free.fr> wrote:
>> Martin, All,
>>
>> On 2018-03-15 19:58 +0000, Martin Bark spake thusly:
>>> On 15 March 2018 at 19:40, Peter Seiderer <ps.report@gmx.net> wrote:
>>>> On Thu, 15 Mar 2018 13:24:51 +0000, Martin Bark <martin@barkynet.com> wrote:
>>>>> Don't list specific dtb files, instead install all dtb files in the same
>>>>> way as dtbo files are currently done.
>>>>>
>>>>> Signed-off-by: Martin Bark <martin@barkynet.com>
>>>>> ---
>>>>> package/rpi-firmware/rpi-firmware.mk | 7 +++----
>>>>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>>>>
>>>>> diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
>>>>> index 1ebdd96..9cc3d4a 100644
>>>>> --- a/package/rpi-firmware/rpi-firmware.mk
>>>>> +++ b/package/rpi-firmware/rpi-firmware.mk
>>>>> @@ -12,10 +12,9 @@ RPI_FIRMWARE_INSTALL_IMAGES = YES
>>>>>
>>>>> ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
>>>>> define RPI_FIRMWARE_INSTALL_DTB
>>>>> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b.dtb
>>>>> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b-plus.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b-plus.dtb
>>>>> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2709-rpi-2-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2709-rpi-2-b.dtb
>>>>> - $(INSTALL) -D -m 0644 $(@D)/boot/bcm2710-rpi-3-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2710-rpi-3-b.dtb
>>>>> + for dtb in $(@D)/boot/*.dtb; do \
>>>>> + $(INSTALL) -D -m 0644 $${dtb} $(BINARIES_DIR)/rpi-firmware/$${dtb##*/} || exit 1; \
>>>>> + done
>>>>
>>>> Which will install three additional dtb files (bcm2708-rpi-0-w.dtb,
>>>> bcm2708-rpi-cm.dtb and bcm2710-rpi-cm3.dtb), not a downside of the
>>>> patch, but worth mentioning....
>>>
>>> Yes, it will also install the new bcm2710-rpi-3-b-plus.dtb. This code
>>> does not seem to have been kept updated, it's missing several dtb
>>> files as you mention. I think it's better to just install all dtb
>>> files as we do for the dtbo files.
>>
>> I wonder if we should not just drop BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
>> now the rpi dtbs are now supposed to be in the kernel snce at least 3.19.
>
> Yes it would be good to remove this. It would also be good to remove
> BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS and have them built as
> part of the kernel. Really only the booloader and /op/vc code is
> needed from rpi-firmware.
>
> Thanks
>
> Martin
>
>>
>> Besids, all our rpi defconfig are using the DT from the kernel, which is
>> another good indication that we don't need those from rpi-firmware
>> anymore...
>>
>> If it is not yet in the kernel, it is just a matter of time before it is
>> available there...
>>
>> Regards,
>> Yann E. MORIN.
>>
>> --
>> .-----------------.--------------------.------------------.--------------------.
>> | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
>> | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
>> | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
>> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
>> '------------------------------^-------^------------------^--------------------'
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
Jens Maus, Dresden/Germany
http://jens-maus.de/
*** Content is authentic only with digital signature ***
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3745 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180316/8fb58798/attachment.p7s>
^ permalink raw reply [flat|nested] 17+ messages in thread* [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files
2018-03-16 9:32 ` Jens Maus
@ 2018-03-16 10:52 ` Martin Bark
2018-03-16 13:07 ` Peter Korsgaard
2018-03-16 13:12 ` Jens Maus
0 siblings, 2 replies; 17+ messages in thread
From: Martin Bark @ 2018-03-16 10:52 UTC (permalink / raw)
To: buildroot
Jenus,
On 16 March 2018 at 09:32, Jens Maus <mail@jens-maus.de> wrote:
> BTW: As you seem to push updates regarding Pi3+ I have some more patches at hand for you :)
>
> https://github.com/jens-maus/RaspberryMatic/blob/master/buildroot-patches/0003-rpi-wifi-firmware.patch
> https://github.com/jens-maus/RaspberryMatic/blob/master/buildroot-patches/0004-wiringpi.patch
>
> The first is to actually get WiFi working again because the NVRAM settings file is different for the new WiFi chip of the Pi3+. The second updates the wiringpi package to the latest master version which fixes compatibility to the Pi3+.
>
> Sorry that I am not able to submit these patches myself via patchwork to buildroot, but my time is unfortunately limited these days. However, feel free to submit these patches yourself.
Yes I'm happy to submit a patch to update rpi-wifi-firmware. I have a
rpi3b+ now so i can test this. I don't use wiringpi so i think it
might be better if someone else more familiar with the package updates
it.
For some reason my v2 patch set disappeared into /dev/null in
patchwork. I'll include the updates to rpi-wifi-firmware and submit
a v3 patchset.
Thanks
Martin
>
> Regards,
> Jens
[--SNIP--]
>
> --
> Jens Maus, Dresden/Germany
> http://jens-maus.de/
>
> *** Content is authentic only with digital signature ***
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files
2018-03-16 10:52 ` Martin Bark
@ 2018-03-16 13:07 ` Peter Korsgaard
2018-03-16 13:12 ` Jens Maus
1 sibling, 0 replies; 17+ messages in thread
From: Peter Korsgaard @ 2018-03-16 13:07 UTC (permalink / raw)
To: buildroot
>>>>> "Martin" == Martin Bark <martin@barkynet.com> writes:
Hi,
> For some reason my v2 patch set disappeared into /dev/null in
> patchwork. I'll include the updates to rpi-wifi-firmware and submit
> a v3 patchset.
We unfortunately have some reliability issues with patchwork at the
moment - Thanks for sending v3.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files
2018-03-16 10:52 ` Martin Bark
2018-03-16 13:07 ` Peter Korsgaard
@ 2018-03-16 13:12 ` Jens Maus
2018-03-16 18:08 ` Martin Bark
1 sibling, 1 reply; 17+ messages in thread
From: Jens Maus @ 2018-03-16 13:12 UTC (permalink / raw)
To: buildroot
Hi,
> Am 16.03.2018 um 11:52 schrieb Martin Bark <martin@barkynet.com>:
>
> Yes I'm happy to submit a patch to update rpi-wifi-firmware. I have a
> rpi3b+ now so i can test this. I don't use wiringpi so i think it
> might be better if someone else more familiar with the package updates
> it.
My patch for wiringpi is quite straight forward and ?just? updates to the latest 2.46 version recently released including necessary patches to the build process patch. IMHO they are quite a no-brainer and can be integrated without any bigger hassle. Thus, it would be great if someone could generate the necessary patchwork stuff accordingly.
Regards,
Jens
--
Jens Maus, Dresden/Germany
http://jens-maus.de/
*** Content is authentic only with digital signature ***
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3745 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180316/2c74c297/attachment.p7s>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files
2018-03-16 13:12 ` Jens Maus
@ 2018-03-16 18:08 ` Martin Bark
0 siblings, 0 replies; 17+ messages in thread
From: Martin Bark @ 2018-03-16 18:08 UTC (permalink / raw)
To: buildroot
Jens,
On 16 March 2018 at 13:12, Jens Maus <mail@jens-maus.de> wrote:
> Hi,
>
>> Am 16.03.2018 um 11:52 schrieb Martin Bark <martin@barkynet.com>:
>>
>> Yes I'm happy to submit a patch to update rpi-wifi-firmware. I have a
>> rpi3b+ now so i can test this. I don't use wiringpi so i think it
>> might be better if someone else more familiar with the package updates
>> it.
>
> My patch for wiringpi is quite straight forward and ?just? updates to the latest 2.46 version recently released including necessary patches to the build process patch. IMHO they are quite a no-brainer and can be integrated without any bigger hassle. Thus, it would be great if someone could generate the necessary patchwork stuff accordingly.
I've just submitted a v3 patchset that additionally includes the wifi
and bt firmware updates. Once this patchset is in buildroot i'll try
and have a look at wiringpi
Thanks
Martin
>
> Regards,
> Jens
> --
> Jens Maus, Dresden/Germany
> http://jens-maus.de/
>
> *** Content is authentic only with digital signature ***
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Buildroot] [PATCH 1/4] package/rpi-firmware: bump version
2018-03-15 13:24 [Buildroot] [PATCH 1/4] package/rpi-firmware: bump version Martin Bark
` (2 preceding siblings ...)
2018-03-15 13:24 ` [Buildroot] [PATCH 4/4] package/rpi-firmware: improve installation of dtb files Martin Bark
@ 2018-03-15 19:28 ` Peter Seiderer
2018-03-15 20:23 ` Martin Bark
3 siblings, 1 reply; 17+ messages in thread
From: Peter Seiderer @ 2018-03-15 19:28 UTC (permalink / raw)
To: buildroot
Hello Martin,
On Thu, 15 Mar 2018 13:24:48 +0000, Martin Bark <martin@barkynet.com> wrote:
> Signed-off-by: Martin Bark <martin@barkynet.com>
> ---
> package/rpi-firmware/rpi-firmware.hash | 2 +-
> package/rpi-firmware/rpi-firmware.mk | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/package/rpi-firmware/rpi-firmware.hash b/package/rpi-firmware/rpi-firmware.hash
> index 833a7fb..0e09ff5 100644
> --- a/package/rpi-firmware/rpi-firmware.hash
> +++ b/package/rpi-firmware/rpi-firmware.hash
> @@ -1,2 +1,2 @@
> # Locally computed
> -sha256 0451e1a843bf02df81126a1625d9a15dfdf19dcb2f9e95b0613a63e59fd31ca8 rpi-firmware-2067241bc7cdf238fdeab7f5a3c22faa57dd5617.tar.gz
> +sha256 8fe5ebe14cc900f67242cab0c1c9f8e29bd10369ccbdfc7d004c294a96bad975 rpi-firmware-086a8488de0f485e8879ac14ff505ff1d922eeed.tar.gz
> diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
> index 22eaaa2..1ebdd96 100644
> --- a/package/rpi-firmware/rpi-firmware.mk
> +++ b/package/rpi-firmware/rpi-firmware.mk
> @@ -4,7 +4,7 @@
> #
> ################################################################################
>
> -RPI_FIRMWARE_VERSION = 2067241bc7cdf238fdeab7f5a3c22faa57dd5617
> +RPI_FIRMWARE_VERSION = 086a8488de0f485e8879ac14ff505ff1d922eeed
This commit (and some more before) have a reference to kernel branch 4.14.x, this one
with subject 'kernel: Bump to 4.14.26'...
The last commit referencing kernel branch 4.9.x is b1a7f4aea6cbd380319c2849ecc5988f9a4dba70
'kernel: Bump to 4.9.80', for consistence your should bump the firmware version to this
commit (or bump the kernel versions to the latest from the 4.14.x branch)...
Regards,
Peter
> RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
> RPI_FIRMWARE_LICENSE = BSD-3-Clause
> RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
^ permalink raw reply [flat|nested] 17+ messages in thread* [Buildroot] [PATCH 1/4] package/rpi-firmware: bump version
2018-03-15 19:28 ` [Buildroot] [PATCH 1/4] package/rpi-firmware: bump version Peter Seiderer
@ 2018-03-15 20:23 ` Martin Bark
0 siblings, 0 replies; 17+ messages in thread
From: Martin Bark @ 2018-03-15 20:23 UTC (permalink / raw)
To: buildroot
Hi Peter,
On 15 March 2018 at 19:28, Peter Seiderer <ps.report@gmx.net> wrote:
> Hello Martin,
>
> On Thu, 15 Mar 2018 13:24:48 +0000, Martin Bark <martin@barkynet.com> wrote:
>
>> Signed-off-by: Martin Bark <martin@barkynet.com>
>> ---
>> package/rpi-firmware/rpi-firmware.hash | 2 +-
>> package/rpi-firmware/rpi-firmware.mk | 2 +-
>> 2 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/package/rpi-firmware/rpi-firmware.hash b/package/rpi-firmware/rpi-firmware.hash
>> index 833a7fb..0e09ff5 100644
>> --- a/package/rpi-firmware/rpi-firmware.hash
>> +++ b/package/rpi-firmware/rpi-firmware.hash
>> @@ -1,2 +1,2 @@
>> # Locally computed
>> -sha256 0451e1a843bf02df81126a1625d9a15dfdf19dcb2f9e95b0613a63e59fd31ca8 rpi-firmware-2067241bc7cdf238fdeab7f5a3c22faa57dd5617.tar.gz
>> +sha256 8fe5ebe14cc900f67242cab0c1c9f8e29bd10369ccbdfc7d004c294a96bad975 rpi-firmware-086a8488de0f485e8879ac14ff505ff1d922eeed.tar.gz
>> diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
>> index 22eaaa2..1ebdd96 100644
>> --- a/package/rpi-firmware/rpi-firmware.mk
>> +++ b/package/rpi-firmware/rpi-firmware.mk
>> @@ -4,7 +4,7 @@
>> #
>> ################################################################################
>>
>> -RPI_FIRMWARE_VERSION = 2067241bc7cdf238fdeab7f5a3c22faa57dd5617
>> +RPI_FIRMWARE_VERSION = 086a8488de0f485e8879ac14ff505ff1d922eeed
>
> This commit (and some more before) have a reference to kernel branch 4.14.x, this one
> with subject 'kernel: Bump to 4.14.26'...
>
> The last commit referencing kernel branch 4.9.x is b1a7f4aea6cbd380319c2849ecc5988f9a4dba70
> 'kernel: Bump to 4.9.80', for consistence your should bump the firmware version to this
> commit (or bump the kernel versions to the latest from the 4.14.x branch)...
Good point i missed that. I'll resubmit my patches and update to the
4.14 kernel instead.
Thanks
Martin
>
> Regards,
> Peter
>
>> RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
>> RPI_FIRMWARE_LICENSE = BSD-3-Clause
>> RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
>
^ permalink raw reply [flat|nested] 17+ messages in thread