All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 1/2] arm64: dts: uniphier: add syscon property for UniPhier sound system
@ 2018-03-20  2:48 ` Katsuhiro Suzuki
  0 siblings, 0 replies; 6+ messages in thread
From: Katsuhiro Suzuki @ 2018-03-20  2:48 UTC (permalink / raw)
  To: linux-arm-kernel, Masahiro Yamada, devicetree
  Cc: Masami Hiramatsu, Jassi Brar, linux-kernel, Katsuhiro Suzuki

This patch adds syscon property for specifying soc-glue core into
device-tree of LD11/LD20 SoC.

Currently, soc-glue core is used for changing the state of S/PDIF
signal output pin to signal output state or Hi-Z state.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
---
 arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 3 ++-
 arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index efa95573b2aa..e62bda1cf2d9 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -197,6 +197,7 @@
 			reset-names = "aio";
 			resets = <&sys_rst 40>;
 			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
 
 			i2s_port0: port@0 {
 				i2s_hdmi: endpoint {
@@ -479,7 +480,7 @@
 			};
 		};
 
-		soc-glue@5f800000 {
+		soc_glue: soc-glue@5f800000 {
 			compatible = "socionext,uniphier-ld11-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 19c935688a77..9efe20d07589 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -297,6 +297,7 @@
 			reset-names = "aio";
 			resets = <&sys_rst 40>;
 			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
 
 			i2s_port0: port@0 {
 				i2s_hdmi: endpoint {
@@ -525,7 +526,7 @@
 			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
 		};
 
-		soc-glue@5f800000 {
+		soc_glue: soc-glue@5f800000 {
 			compatible = "socionext,uniphier-ld20-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
-- 
2.16.2

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v2 1/2] arm64: dts: uniphier: add syscon property for UniPhier sound system
@ 2018-03-20  2:48 ` Katsuhiro Suzuki
  0 siblings, 0 replies; 6+ messages in thread
From: Katsuhiro Suzuki @ 2018-03-20  2:48 UTC (permalink / raw)
  To: linux-arm-kernel

This patch adds syscon property for specifying soc-glue core into
device-tree of LD11/LD20 SoC.

Currently, soc-glue core is used for changing the state of S/PDIF
signal output pin to signal output state or Hi-Z state.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
---
 arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 3 ++-
 arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index efa95573b2aa..e62bda1cf2d9 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -197,6 +197,7 @@
 			reset-names = "aio";
 			resets = <&sys_rst 40>;
 			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
 
 			i2s_port0: port at 0 {
 				i2s_hdmi: endpoint {
@@ -479,7 +480,7 @@
 			};
 		};
 
-		soc-glue at 5f800000 {
+		soc_glue: soc-glue at 5f800000 {
 			compatible = "socionext,uniphier-ld11-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 19c935688a77..9efe20d07589 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -297,6 +297,7 @@
 			reset-names = "aio";
 			resets = <&sys_rst 40>;
 			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
 
 			i2s_port0: port at 0 {
 				i2s_hdmi: endpoint {
@@ -525,7 +526,7 @@
 			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
 		};
 
-		soc-glue at 5f800000 {
+		soc_glue: soc-glue at 5f800000 {
 			compatible = "socionext,uniphier-ld20-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
-- 
2.16.2

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v2 2/2] ARM: dts: uniphier: add syscon property for UniPhier sound system
  2018-03-20  2:48 ` Katsuhiro Suzuki
@ 2018-03-20  2:48   ` Katsuhiro Suzuki
  -1 siblings, 0 replies; 6+ messages in thread
From: Katsuhiro Suzuki @ 2018-03-20  2:48 UTC (permalink / raw)
  To: linux-arm-kernel, Masahiro Yamada, devicetree
  Cc: Masami Hiramatsu, Jassi Brar, linux-kernel, Katsuhiro Suzuki

This patch adds syscon property for specifying soc-glue core into
device-tree of PXs2 SoC.

Currently, soc-glue core is used for changing the state of S/PDIF
signal output pin to signal output state or Hi-Z state.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
---
 arch/arm/boot/dts/uniphier-pxs2.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 595045441c9c..debcbd15c24b 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -242,6 +242,7 @@
 			reset-names = "aio";
 			resets = <&sys_rst 40>;
 			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
 
 			i2s_port0: port@0 {
 				i2s_hdmi: endpoint {
@@ -418,7 +419,7 @@
 			};
 		};
 
-		soc-glue@5f800000 {
+		soc_glue: soc-glue@5f800000 {
 			compatible = "socionext,uniphier-pxs2-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
-- 
2.16.2

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v2 2/2] ARM: dts: uniphier: add syscon property for UniPhier sound system
@ 2018-03-20  2:48   ` Katsuhiro Suzuki
  0 siblings, 0 replies; 6+ messages in thread
From: Katsuhiro Suzuki @ 2018-03-20  2:48 UTC (permalink / raw)
  To: linux-arm-kernel

This patch adds syscon property for specifying soc-glue core into
device-tree of PXs2 SoC.

Currently, soc-glue core is used for changing the state of S/PDIF
signal output pin to signal output state or Hi-Z state.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
---
 arch/arm/boot/dts/uniphier-pxs2.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 595045441c9c..debcbd15c24b 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -242,6 +242,7 @@
 			reset-names = "aio";
 			resets = <&sys_rst 40>;
 			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
 
 			i2s_port0: port at 0 {
 				i2s_hdmi: endpoint {
@@ -418,7 +419,7 @@
 			};
 		};
 
-		soc-glue at 5f800000 {
+		soc_glue: soc-glue at 5f800000 {
 			compatible = "socionext,uniphier-pxs2-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
-- 
2.16.2

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] arm64: dts: uniphier: add syscon property for UniPhier sound system
  2018-03-20  2:48 ` Katsuhiro Suzuki
@ 2018-03-20 15:14   ` Masahiro Yamada
  -1 siblings, 0 replies; 6+ messages in thread
From: Masahiro Yamada @ 2018-03-20 15:14 UTC (permalink / raw)
  To: Katsuhiro Suzuki
  Cc: linux-arm-kernel, devicetree, Masami Hiramatsu, Jassi Brar,
	Linux Kernel Mailing List

2018-03-20 11:48 GMT+09:00 Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>:
> This patch adds syscon property for specifying soc-glue core into
> device-tree of LD11/LD20 SoC.
>
> Currently, soc-glue core is used for changing the state of S/PDIF
> signal output pin to signal output state or Hi-Z state.
>
> Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>

Both applied.
Thanks.

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH v2 1/2] arm64: dts: uniphier: add syscon property for UniPhier sound system
@ 2018-03-20 15:14   ` Masahiro Yamada
  0 siblings, 0 replies; 6+ messages in thread
From: Masahiro Yamada @ 2018-03-20 15:14 UTC (permalink / raw)
  To: linux-arm-kernel

2018-03-20 11:48 GMT+09:00 Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>:
> This patch adds syscon property for specifying soc-glue core into
> device-tree of LD11/LD20 SoC.
>
> Currently, soc-glue core is used for changing the state of S/PDIF
> signal output pin to signal output state or Hi-Z state.
>
> Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>

Both applied.
Thanks.

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-03-20 15:15 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-20  2:48 [PATCH v2 1/2] arm64: dts: uniphier: add syscon property for UniPhier sound system Katsuhiro Suzuki
2018-03-20  2:48 ` Katsuhiro Suzuki
2018-03-20  2:48 ` [PATCH v2 2/2] ARM: " Katsuhiro Suzuki
2018-03-20  2:48   ` Katsuhiro Suzuki
2018-03-20 15:14 ` [PATCH v2 1/2] arm64: " Masahiro Yamada
2018-03-20 15:14   ` Masahiro Yamada

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.