* [PATCH v3] git{,-blame}.el: remove old bitrotting Emacs code [not found] <EKzyQbDEJGG4Lm5YboF8xg@mail.gmail.com> @ 2018-03-10 18:45 ` Ævar Arnfjörð Bjarmason 2018-03-13 18:53 ` [PATCH v2] " Ævar Arnfjörð Bjarmason 2018-03-27 16:57 ` [PATCH v3] " Jonathan Nieder 0 siblings, 2 replies; 26+ messages in thread From: Ævar Arnfjörð Bjarmason @ 2018-03-10 18:45 UTC (permalink / raw) To: git Cc: Junio C Hamano, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal, Kyle Meyer, Martin Ågren, Ævar Arnfjörð Bjarmason The git-blame.el mode has been superseded by Emacs's own vc-annotate (invoked by C-x v g). Users of the git.el mode are now much better off using either Magit or the Git backend for Emacs's own VC mode. These modes were added over 10 years ago when Emacs's own Git support was much less mature, and there weren't other mature modes in the wild or shipped with Emacs itself. These days these modes have few if any users, and users of git aren't well served by us shipping these (some OS's install them alongside git by default, which is confusing and leads users astray). So let's remove these per Alexandre Julliard's message to the ML[1]. If someone still wants these for some reason they're better served by hosting these elsewhere (e.g. on ELPA), instead of us distributing them with git. 1. "Re: [PATCH] git.el: handle default excludesfile properly" (87muzlwhb0.fsf@winehq.org) -- https://public-inbox.org/git/87muzlwhb0.fsf@winehq.org/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> --- On Sat, Mar 10 2018, Martin Ågren jotted: > [...] Thanks. Here's a v3 which incorporates these suggestions, and also Kyle's suggestion upthread which I somehow missed when re-rolling this. tbdiff to v2 below: 1: ad00297143 ! 1: 5bc3d3848d git{,-blame}.el: remove old bitrotting Emacs code @@ -11,7 +11,7 @@ was much less mature, and there weren't other mature modes in the wild or shipped with Emacs itself. - These days these modes have very few if users, and users of git aren't + These days these modes have few if any users, and users of git aren't well served by us shipping these (some OS's install them alongside git by default, which is confusing and leads users astray). @@ -70,10 +70,10 @@ -To make the modules available to Emacs, you should add this directory -to your load-path, and then require the modules you want. This can be -done by adding to your .emacs something like this: -+These were added shortly after Git was first released, since then ++These were added shortly after Git was first released. Since then +Emacs's own support for Git got better than what was offered by these -+modules, or was superseded by popular 3rd-party Git modes such as -+Magit. ++modes. There are also popular 3rd-party Git modes such as Magit which ++offer replacements for these. - (add-to-list 'load-path ".../git/contrib/emacs") - (require 'git) @@ -92,7 +92,7 @@ - the pcl-cvs mode. It can be started with `M-x git-status'. + Wrapper for "git status" that provided access to other git commands. + -+ Modern alternatives to this are Magit, or the VC mode that ships ++ Modern alternatives to this include Magit, and VC mode that ships + with Emacs. * git-blame.el: contrib/emacs/.gitignore | 1 - contrib/emacs/Makefile | 21 - contrib/emacs/README | 32 +- contrib/emacs/git-blame.el | 483 ------------- contrib/emacs/git.el | 1704 -------------------------------------------- 5 files changed, 13 insertions(+), 2228 deletions(-) delete mode 100644 contrib/emacs/.gitignore delete mode 100644 contrib/emacs/Makefile delete mode 100644 contrib/emacs/git-blame.el delete mode 100644 contrib/emacs/git.el diff --git a/contrib/emacs/.gitignore b/contrib/emacs/.gitignore deleted file mode 100644 index c531d9867f..0000000000 --- a/contrib/emacs/.gitignore +++ /dev/null @@ -1 +0,0 @@ -*.elc diff --git a/contrib/emacs/Makefile b/contrib/emacs/Makefile deleted file mode 100644 index 24d9312941..0000000000 --- a/contrib/emacs/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -## Build and install stuff - -EMACS = emacs - -ELC = git.elc git-blame.elc -INSTALL ?= install -INSTALL_ELC = $(INSTALL) -m 644 -prefix ?= $(HOME) -emacsdir = $(prefix)/share/emacs/site-lisp -RM ?= rm -f - -all: $(ELC) - -install: all - $(INSTALL) -d $(DESTDIR)$(emacsdir) - $(INSTALL_ELC) $(ELC:.elc=.el) $(ELC) $(DESTDIR)$(emacsdir) - -%.elc: %.el - $(EMACS) -batch -f batch-byte-compile $< - -clean:; $(RM) $(ELC) diff --git a/contrib/emacs/README b/contrib/emacs/README index 82368bdbff..977a16f1e3 100644 --- a/contrib/emacs/README +++ b/contrib/emacs/README @@ -1,30 +1,24 @@ -This directory contains various modules for Emacs support. +This directory used to contain various modules for Emacs support. -To make the modules available to Emacs, you should add this directory -to your load-path, and then require the modules you want. This can be -done by adding to your .emacs something like this: +These were added shortly after Git was first released. Since then +Emacs's own support for Git got better than what was offered by these +modes. There are also popular 3rd-party Git modes such as Magit which +offer replacements for these. - (add-to-list 'load-path ".../git/contrib/emacs") - (require 'git) - (require 'git-blame) - - -The following modules are available: +The following modules were available, and can be dug up from the Git +history: * git.el: - Status manager that displays the state of all the files of the - project, and provides easy access to the most frequently used git - commands. The user interface is as far as possible compatible with - the pcl-cvs mode. It can be started with `M-x git-status'. + Wrapper for "git status" that provided access to other git commands. + + Modern alternatives to this include Magit, and VC mode that ships + with Emacs. * git-blame.el: - Emacs implementation of incremental git-blame. When you turn it on - while viewing a file, the editor buffer will be updated by setting - the background of individual lines to a color that reflects which - commit it comes from. And when you move around the buffer, a - one-line summary will be shown in the echo area. + A wrapper for "git blame" written before Emacs's own vc-annotate + mode learned to invoke git-blame, which can be done via C-x v g. * vc-git.el: diff --git a/contrib/emacs/git-blame.el b/contrib/emacs/git-blame.el deleted file mode 100644 index 510e0f7103..0000000000 --- a/contrib/emacs/git-blame.el +++ /dev/null @@ -1,483 +0,0 @@ -;;; git-blame.el --- Minor mode for incremental blame for Git -*- coding: utf-8 -*- -;; -;; Copyright (C) 2007 David Kågedal -;; -;; Authors: David Kågedal <davidk@lysator.liu.se> -;; Created: 31 Jan 2007 -;; Message-ID: <87iren2vqx.fsf@morpheus.local> -;; License: GPL -;; Keywords: git, version control, release management -;; -;; Compatibility: Emacs21, Emacs22 and EmacsCVS -;; Git 1.5 and up - -;; This file is *NOT* part of GNU Emacs. -;; This file is distributed under the same terms as GNU Emacs. - -;; This program is free software; you can redistribute it and/or -;; modify it under the terms of the GNU General Public License as -;; published by the Free Software Foundation; either version 2 of -;; the License, or (at your option) any later version. - -;; This program is distributed in the hope that it will be -;; useful, but WITHOUT ANY WARRANTY; without even the implied -;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR -;; PURPOSE. See the GNU General Public License for more details. - -;; You should have received a copy of the GNU General Public -;; License along with this program; if not, see -;; <http://www.gnu.org/licenses/>. - -;; http://www.fsf.org/copyleft/gpl.html - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;;; Commentary: -;; -;; Here is an Emacs implementation of incremental git-blame. When you -;; turn it on while viewing a file, the editor buffer will be updated by -;; setting the background of individual lines to a color that reflects -;; which commit it comes from. And when you move around the buffer, a -;; one-line summary will be shown in the echo area. - -;;; Installation: -;; -;; To use this package, put it somewhere in `load-path' (or add -;; directory with git-blame.el to `load-path'), and add the following -;; line to your .emacs: -;; -;; (require 'git-blame) -;; -;; If you do not want to load this package before it is necessary, you -;; can make use of the `autoload' feature, e.g. by adding to your .emacs -;; the following lines -;; -;; (autoload 'git-blame-mode "git-blame" -;; "Minor mode for incremental blame for Git." t) -;; -;; Then first use of `M-x git-blame-mode' would load the package. - -;;; Compatibility: -;; -;; It requires GNU Emacs 21 or later and Git 1.5.0 and up -;; -;; If you'are using Emacs 20, try changing this: -;; -;; (overlay-put ovl 'face (list :background -;; (cdr (assq 'color (cddddr info))))) -;; -;; to -;; -;; (overlay-put ovl 'face (cons 'background-color -;; (cdr (assq 'color (cddddr info))))) - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;;; Code: - -(eval-when-compile (require 'cl)) ; to use `push', `pop' -(require 'format-spec) - -(defface git-blame-prefix-face - '((((background dark)) (:foreground "gray" - :background "black")) - (((background light)) (:foreground "gray" - :background "white")) - (t (:weight bold))) - "The face used for the hash prefix." - :group 'git-blame) - -(defgroup git-blame nil - "A minor mode showing Git blame information." - :group 'git - :link '(function-link git-blame-mode)) - - -(defcustom git-blame-use-colors t - "Use colors to indicate commits in `git-blame-mode'." - :type 'boolean - :group 'git-blame) - -(defcustom git-blame-prefix-format - "%h %20A:" - "The format of the prefix added to each line in `git-blame' -mode. The format is passed to `format-spec' with the following format keys: - - %h - the abbreviated hash - %H - the full hash - %a - the author name - %A - the author email - %c - the committer name - %C - the committer email - %s - the commit summary -" - :group 'git-blame) - -(defcustom git-blame-mouseover-format - "%h %a %A: %s" - "The format of the description shown when pointing at a line in -`git-blame' mode. The format string is passed to `format-spec' -with the following format keys: - - %h - the abbreviated hash - %H - the full hash - %a - the author name - %A - the author email - %c - the committer name - %C - the committer email - %s - the commit summary -" - :group 'git-blame) - - -(defun git-blame-color-scale (&rest elements) - "Given a list, returns a list of triples formed with each -elements of the list. - -a b => bbb bba bab baa abb aba aaa aab" - (let (result) - (dolist (a elements) - (dolist (b elements) - (dolist (c elements) - (setq result (cons (format "#%s%s%s" a b c) result))))) - result)) - -;; (git-blame-color-scale "0c" "04" "24" "1c" "2c" "34" "14" "3c") => -;; ("#3c3c3c" "#3c3c14" "#3c3c34" "#3c3c2c" "#3c3c1c" "#3c3c24" -;; "#3c3c04" "#3c3c0c" "#3c143c" "#3c1414" "#3c1434" "#3c142c" ...) - -(defmacro git-blame-random-pop (l) - "Select a random element from L and returns it. Also remove -selected element from l." - ;; only works on lists with unique elements - `(let ((e (elt ,l (random (length ,l))))) - (setq ,l (remove e ,l)) - e)) - -(defvar git-blame-log-oneline-format - "format:[%cr] %cn: %s" - "*Formatting option used for describing current line in the minibuffer. - -This option is used to pass to git log --pretty= command-line option, -and describe which commit the current line was made.") - -(defvar git-blame-dark-colors - (git-blame-color-scale "0c" "04" "24" "1c" "2c" "34" "14" "3c") - "*List of colors (format #RGB) to use in a dark environment. - -To check out the list, evaluate (list-colors-display git-blame-dark-colors).") - -(defvar git-blame-light-colors - (git-blame-color-scale "c4" "d4" "cc" "dc" "f4" "e4" "fc" "ec") - "*List of colors (format #RGB) to use in a light environment. - -To check out the list, evaluate (list-colors-display git-blame-light-colors).") - -(defvar git-blame-colors '() - "Colors used by git-blame. The list is built once when activating git-blame -minor mode.") - -(defvar git-blame-ancient-color "dark green" - "*Color to be used for ancient commit.") - -(defvar git-blame-autoupdate t - "*Automatically update the blame display while editing") - -(defvar git-blame-proc nil - "The running git-blame process") -(make-variable-buffer-local 'git-blame-proc) - -(defvar git-blame-overlays nil - "The git-blame overlays used in the current buffer.") -(make-variable-buffer-local 'git-blame-overlays) - -(defvar git-blame-cache nil - "A cache of git-blame information for the current buffer") -(make-variable-buffer-local 'git-blame-cache) - -(defvar git-blame-idle-timer nil - "An idle timer that updates the blame") -(make-variable-buffer-local 'git-blame-cache) - -(defvar git-blame-update-queue nil - "A queue of update requests") -(make-variable-buffer-local 'git-blame-update-queue) - -;; FIXME: docstrings -(defvar git-blame-file nil) -(defvar git-blame-current nil) - -(defvar git-blame-mode nil) -(make-variable-buffer-local 'git-blame-mode) - -(defvar git-blame-mode-line-string " blame" - "String to display on the mode line when git-blame is active.") - -(or (assq 'git-blame-mode minor-mode-alist) - (setq minor-mode-alist - (cons '(git-blame-mode git-blame-mode-line-string) minor-mode-alist))) - -;;;###autoload -(defun git-blame-mode (&optional arg) - "Toggle minor mode for displaying Git blame - -With prefix ARG, turn the mode on if ARG is positive." - (interactive "P") - (cond - ((null arg) - (if git-blame-mode (git-blame-mode-off) (git-blame-mode-on))) - ((> (prefix-numeric-value arg) 0) (git-blame-mode-on)) - (t (git-blame-mode-off)))) - -(defun git-blame-mode-on () - "Turn on git-blame mode. - -See also function `git-blame-mode'." - (make-local-variable 'git-blame-colors) - (if git-blame-autoupdate - (add-hook 'after-change-functions 'git-blame-after-change nil t) - (remove-hook 'after-change-functions 'git-blame-after-change t)) - (git-blame-cleanup) - (let ((bgmode (cdr (assoc 'background-mode (frame-parameters))))) - (if (eq bgmode 'dark) - (setq git-blame-colors git-blame-dark-colors) - (setq git-blame-colors git-blame-light-colors))) - (setq git-blame-cache (make-hash-table :test 'equal)) - (setq git-blame-mode t) - (git-blame-run)) - -(defun git-blame-mode-off () - "Turn off git-blame mode. - -See also function `git-blame-mode'." - (git-blame-cleanup) - (if git-blame-idle-timer (cancel-timer git-blame-idle-timer)) - (setq git-blame-mode nil)) - -;;;###autoload -(defun git-reblame () - "Recalculate all blame information in the current buffer" - (interactive) - (unless git-blame-mode - (error "Git-blame is not active")) - - (git-blame-cleanup) - (git-blame-run)) - -(defun git-blame-run (&optional startline endline) - (if git-blame-proc - ;; Should maybe queue up a new run here - (message "Already running git blame") - (let ((display-buf (current-buffer)) - (blame-buf (get-buffer-create - (concat " git blame for " (buffer-name)))) - (args '("--incremental" "--contents" "-"))) - (if startline - (setq args (append args - (list "-L" (format "%d,%d" startline endline))))) - (setq args (append args - (list (file-name-nondirectory buffer-file-name)))) - (setq git-blame-proc - (apply 'start-process - "git-blame" blame-buf - "git" "blame" - args)) - (with-current-buffer blame-buf - (erase-buffer) - (make-local-variable 'git-blame-file) - (make-local-variable 'git-blame-current) - (setq git-blame-file display-buf) - (setq git-blame-current nil)) - (set-process-filter git-blame-proc 'git-blame-filter) - (set-process-sentinel git-blame-proc 'git-blame-sentinel) - (process-send-region git-blame-proc (point-min) (point-max)) - (process-send-eof git-blame-proc)))) - -(defun remove-git-blame-text-properties (start end) - (let ((modified (buffer-modified-p)) - (inhibit-read-only t)) - (remove-text-properties start end '(point-entered nil)) - (set-buffer-modified-p modified))) - -(defun git-blame-cleanup () - "Remove all blame properties" - (mapc 'delete-overlay git-blame-overlays) - (setq git-blame-overlays nil) - (remove-git-blame-text-properties (point-min) (point-max))) - -(defun git-blame-update-region (start end) - "Rerun blame to get updates between START and END" - (let ((overlays (overlays-in start end))) - (while overlays - (let ((overlay (pop overlays))) - (if (< (overlay-start overlay) start) - (setq start (overlay-start overlay))) - (if (> (overlay-end overlay) end) - (setq end (overlay-end overlay))) - (setq git-blame-overlays (delete overlay git-blame-overlays)) - (delete-overlay overlay)))) - (remove-git-blame-text-properties start end) - ;; We can be sure that start and end are at line breaks - (git-blame-run (1+ (count-lines (point-min) start)) - (count-lines (point-min) end))) - -(defun git-blame-sentinel (proc status) - (with-current-buffer (process-buffer proc) - (with-current-buffer git-blame-file - (setq git-blame-proc nil) - (if git-blame-update-queue - (git-blame-delayed-update)))) - ;;(kill-buffer (process-buffer proc)) - ;;(message "git blame finished") - ) - -(defvar in-blame-filter nil) - -(defun git-blame-filter (proc str) - (with-current-buffer (process-buffer proc) - (save-excursion - (goto-char (process-mark proc)) - (insert-before-markers str) - (goto-char (point-min)) - (unless in-blame-filter - (let ((more t) - (in-blame-filter t)) - (while more - (setq more (git-blame-parse)))))))) - -(defun git-blame-parse () - (cond ((looking-at "\\([0-9a-f]\\{40\\}\\) \\([0-9]+\\) \\([0-9]+\\) \\([0-9]+\\)\n") - (let ((hash (match-string 1)) - (src-line (string-to-number (match-string 2))) - (res-line (string-to-number (match-string 3))) - (num-lines (string-to-number (match-string 4)))) - (delete-region (point) (match-end 0)) - (setq git-blame-current (list (git-blame-new-commit hash) - src-line res-line num-lines))) - t) - ((looking-at "\\([a-z-]+\\) \\(.+\\)\n") - (let ((key (match-string 1)) - (value (match-string 2))) - (delete-region (point) (match-end 0)) - (git-blame-add-info (car git-blame-current) key value) - (when (string= key "filename") - (git-blame-create-overlay (car git-blame-current) - (caddr git-blame-current) - (cadddr git-blame-current)) - (setq git-blame-current nil))) - t) - (t - nil))) - -(defun git-blame-new-commit (hash) - (with-current-buffer git-blame-file - (or (gethash hash git-blame-cache) - ;; Assign a random color to each new commit info - ;; Take care not to select the same color multiple times - (let* ((color (if git-blame-colors - (git-blame-random-pop git-blame-colors) - git-blame-ancient-color)) - (info `(,hash (color . ,color)))) - (puthash hash info git-blame-cache) - info)))) - -(defun git-blame-create-overlay (info start-line num-lines) - (with-current-buffer git-blame-file - (save-excursion - (let ((inhibit-point-motion-hooks t) - (inhibit-modification-hooks t)) - (goto-char (point-min)) - (forward-line (1- start-line)) - (let* ((start (point)) - (end (progn (forward-line num-lines) (point))) - (ovl (make-overlay start end)) - (hash (car info)) - (spec `((?h . ,(substring hash 0 6)) - (?H . ,hash) - (?a . ,(git-blame-get-info info 'author)) - (?A . ,(git-blame-get-info info 'author-mail)) - (?c . ,(git-blame-get-info info 'committer)) - (?C . ,(git-blame-get-info info 'committer-mail)) - (?s . ,(git-blame-get-info info 'summary))))) - (push ovl git-blame-overlays) - (overlay-put ovl 'git-blame info) - (overlay-put ovl 'help-echo - (format-spec git-blame-mouseover-format spec)) - (if git-blame-use-colors - (overlay-put ovl 'face (list :background - (cdr (assq 'color (cdr info)))))) - (overlay-put ovl 'line-prefix - (propertize (format-spec git-blame-prefix-format spec) - 'face 'git-blame-prefix-face))))))) - -(defun git-blame-add-info (info key value) - (nconc info (list (cons (intern key) value)))) - -(defun git-blame-get-info (info key) - (cdr (assq key (cdr info)))) - -(defun git-blame-current-commit () - (let ((info (get-char-property (point) 'git-blame))) - (if info - (car info) - (error "No commit info")))) - -(defun git-describe-commit (hash) - (with-temp-buffer - (call-process "git" nil t nil - "log" "-1" - (concat "--pretty=" git-blame-log-oneline-format) - hash) - (buffer-substring (point-min) (point-max)))) - -(defvar git-blame-last-identification nil) -(make-variable-buffer-local 'git-blame-last-identification) -(defun git-blame-identify (&optional hash) - (interactive) - (let ((info (gethash (or hash (git-blame-current-commit)) git-blame-cache))) - (when (and info (not (eq info git-blame-last-identification))) - (message "%s" (nth 4 info)) - (setq git-blame-last-identification info)))) - -;; (defun git-blame-after-save () -;; (when git-blame-mode -;; (git-blame-cleanup) -;; (git-blame-run))) -;; (add-hook 'after-save-hook 'git-blame-after-save) - -(defun git-blame-after-change (start end length) - (when git-blame-mode - (git-blame-enq-update start end))) - -(defvar git-blame-last-update nil) -(make-variable-buffer-local 'git-blame-last-update) -(defun git-blame-enq-update (start end) - "Mark the region between START and END as needing blame update" - ;; Try to be smart and avoid multiple callouts for sequential - ;; editing - (cond ((and git-blame-last-update - (= start (cdr git-blame-last-update))) - (setcdr git-blame-last-update end)) - ((and git-blame-last-update - (= end (car git-blame-last-update))) - (setcar git-blame-last-update start)) - (t - (setq git-blame-last-update (cons start end)) - (setq git-blame-update-queue (nconc git-blame-update-queue - (list git-blame-last-update))))) - (unless (or git-blame-proc git-blame-idle-timer) - (setq git-blame-idle-timer - (run-with-idle-timer 0.5 nil 'git-blame-delayed-update)))) - -(defun git-blame-delayed-update () - (setq git-blame-idle-timer nil) - (if git-blame-update-queue - (let ((first (pop git-blame-update-queue)) - (inhibit-point-motion-hooks t)) - (git-blame-update-region (car first) (cdr first))))) - -(provide 'git-blame) - -;;; git-blame.el ends here diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el deleted file mode 100644 index 97919f2d73..0000000000 --- a/contrib/emacs/git.el +++ /dev/null @@ -1,1704 +0,0 @@ -;;; git.el --- A user interface for git - -;; Copyright (C) 2005, 2006, 2007, 2008, 2009 Alexandre Julliard <julliard@winehq.org> - -;; Version: 1.0 - -;; This program is free software; you can redistribute it and/or -;; modify it under the terms of the GNU General Public License as -;; published by the Free Software Foundation; either version 2 of -;; the License, or (at your option) any later version. -;; -;; This program is distributed in the hope that it will be -;; useful, but WITHOUT ANY WARRANTY; without even the implied -;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR -;; PURPOSE. See the GNU General Public License for more details. -;; -;; You should have received a copy of the GNU General Public -;; License along with this program; if not, see -;; <http://www.gnu.org/licenses/>. - -;;; Commentary: - -;; This file contains an interface for the git version control -;; system. It provides easy access to the most frequently used git -;; commands. The user interface is as far as possible identical to -;; that of the PCL-CVS mode. -;; -;; To install: put this file on the load-path and place the following -;; in your .emacs file: -;; -;; (require 'git) -;; -;; To start: `M-x git-status' -;; -;; TODO -;; - diff against other branch -;; - renaming files from the status buffer -;; - creating tags -;; - fetch/pull -;; - revlist browser -;; - git-show-branch browser -;; - -;;; Compatibility: -;; -;; This file works on GNU Emacs 21 or later. It may work on older -;; versions but this is not guaranteed. -;; -;; It may work on XEmacs 21, provided that you first install the ewoc -;; and log-edit packages. -;; - -(eval-when-compile (require 'cl)) -(require 'ewoc) -(require 'log-edit) -(require 'easymenu) - - -;;;; Customizations -;;;; ------------------------------------------------------------ - -(defgroup git nil - "A user interface for the git versioning system." - :group 'tools) - -(defcustom git-committer-name nil - "User name to use for commits. -The default is to fall back to the repository config, -then to `add-log-full-name' and then to `user-full-name'." - :group 'git - :type '(choice (const :tag "Default" nil) - (string :tag "Name"))) - -(defcustom git-committer-email nil - "Email address to use for commits. -The default is to fall back to the git repository config, -then to `add-log-mailing-address' and then to `user-mail-address'." - :group 'git - :type '(choice (const :tag "Default" nil) - (string :tag "Email"))) - -(defcustom git-commits-coding-system nil - "Default coding system for the log message of git commits." - :group 'git - :type '(choice (const :tag "From repository config" nil) - (coding-system))) - -(defcustom git-append-signed-off-by nil - "Whether to append a Signed-off-by line to the commit message before editing." - :group 'git - :type 'boolean) - -(defcustom git-reuse-status-buffer t - "Whether `git-status' should try to reuse an existing buffer -if there is already one that displays the same directory." - :group 'git - :type 'boolean) - -(defcustom git-per-dir-ignore-file ".gitignore" - "Name of the per-directory ignore file." - :group 'git - :type 'string) - -(defcustom git-show-uptodate nil - "Whether to display up-to-date files." - :group 'git - :type 'boolean) - -(defcustom git-show-ignored nil - "Whether to display ignored files." - :group 'git - :type 'boolean) - -(defcustom git-show-unknown t - "Whether to display unknown files." - :group 'git - :type 'boolean) - - -(defface git-status-face - '((((class color) (background light)) (:foreground "purple")) - (((class color) (background dark)) (:foreground "salmon"))) - "Git mode face used to highlight added and modified files." - :group 'git) - -(defface git-unmerged-face - '((((class color) (background light)) (:foreground "red" :bold t)) - (((class color) (background dark)) (:foreground "red" :bold t))) - "Git mode face used to highlight unmerged files." - :group 'git) - -(defface git-unknown-face - '((((class color) (background light)) (:foreground "goldenrod" :bold t)) - (((class color) (background dark)) (:foreground "goldenrod" :bold t))) - "Git mode face used to highlight unknown files." - :group 'git) - -(defface git-uptodate-face - '((((class color) (background light)) (:foreground "grey60")) - (((class color) (background dark)) (:foreground "grey40"))) - "Git mode face used to highlight up-to-date files." - :group 'git) - -(defface git-ignored-face - '((((class color) (background light)) (:foreground "grey60")) - (((class color) (background dark)) (:foreground "grey40"))) - "Git mode face used to highlight ignored files." - :group 'git) - -(defface git-mark-face - '((((class color) (background light)) (:foreground "red" :bold t)) - (((class color) (background dark)) (:foreground "tomato" :bold t))) - "Git mode face used for the file marks." - :group 'git) - -(defface git-header-face - '((((class color) (background light)) (:foreground "blue")) - (((class color) (background dark)) (:foreground "blue"))) - "Git mode face used for commit headers." - :group 'git) - -(defface git-separator-face - '((((class color) (background light)) (:foreground "brown")) - (((class color) (background dark)) (:foreground "brown"))) - "Git mode face used for commit separator." - :group 'git) - -(defface git-permission-face - '((((class color) (background light)) (:foreground "green" :bold t)) - (((class color) (background dark)) (:foreground "green" :bold t))) - "Git mode face used for permission changes." - :group 'git) - - -;;;; Utilities -;;;; ------------------------------------------------------------ - -(defconst git-log-msg-separator "--- log message follows this line ---") - -(defvar git-log-edit-font-lock-keywords - `(("^\\(Author:\\|Date:\\|Merge:\\|Signed-off-by:\\)\\(.*\\)$" - (1 font-lock-keyword-face) - (2 font-lock-function-name-face)) - (,(concat "^\\(" (regexp-quote git-log-msg-separator) "\\)$") - (1 font-lock-comment-face)))) - -(defun git-get-env-strings (env) - "Build a list of NAME=VALUE strings from a list of environment strings." - (mapcar (lambda (entry) (concat (car entry) "=" (cdr entry))) env)) - -(defun git-call-process (buffer &rest args) - "Wrapper for call-process that sets environment strings." - (apply #'call-process "git" nil buffer nil args)) - -(defun git-call-process-display-error (&rest args) - "Wrapper for call-process that displays error messages." - (let* ((dir default-directory) - (buffer (get-buffer-create "*Git Command Output*")) - (ok (with-current-buffer buffer - (let ((default-directory dir) - (buffer-read-only nil)) - (erase-buffer) - (eq 0 (apply #'git-call-process (list buffer t) args)))))) - (unless ok (display-message-or-buffer buffer)) - ok)) - -(defun git-call-process-string (&rest args) - "Wrapper for call-process that returns the process output as a string, -or nil if the git command failed." - (with-temp-buffer - (and (eq 0 (apply #'git-call-process t args)) - (buffer-string)))) - -(defun git-call-process-string-display-error (&rest args) - "Wrapper for call-process that displays error message and returns -the process output as a string, or nil if the git command failed." - (with-temp-buffer - (if (eq 0 (apply #'git-call-process (list t t) args)) - (buffer-string) - (display-message-or-buffer (current-buffer)) - nil))) - -(defun git-run-process-region (buffer start end program args) - "Run a git process with a buffer region as input." - (let ((output-buffer (current-buffer)) - (dir default-directory)) - (with-current-buffer buffer - (cd dir) - (apply #'call-process-region start end program - nil (list output-buffer t) nil args)))) - -(defun git-run-command-buffer (buffer-name &rest args) - "Run a git command, sending the output to a buffer named BUFFER-NAME." - (let ((dir default-directory) - (buffer (get-buffer-create buffer-name))) - (message "Running git %s..." (car args)) - (with-current-buffer buffer - (let ((default-directory dir) - (buffer-read-only nil)) - (erase-buffer) - (apply #'git-call-process buffer args))) - (message "Running git %s...done" (car args)) - buffer)) - -(defun git-run-command-region (buffer start end env &rest args) - "Run a git command with specified buffer region as input." - (with-temp-buffer - (if (eq 0 (if env - (git-run-process-region - buffer start end "env" - (append (git-get-env-strings env) (list "git") args)) - (git-run-process-region buffer start end "git" args))) - (buffer-string) - (display-message-or-buffer (current-buffer)) - nil))) - -(defun git-run-hook (hook env &rest args) - "Run a git hook and display its output if any." - (let ((dir default-directory) - (hook-name (expand-file-name (concat ".git/hooks/" hook)))) - (or (not (file-executable-p hook-name)) - (let (status (buffer (get-buffer-create "*Git Hook Output*"))) - (with-current-buffer buffer - (erase-buffer) - (cd dir) - (setq status - (if env - (apply #'call-process "env" nil (list buffer t) nil - (append (git-get-env-strings env) (list hook-name) args)) - (apply #'call-process hook-name nil (list buffer t) nil args)))) - (display-message-or-buffer buffer) - (eq 0 status))))) - -(defun git-get-string-sha1 (string) - "Read a SHA1 from the specified string." - (and string - (string-match "[0-9a-f]\\{40\\}" string) - (match-string 0 string))) - -(defun git-get-committer-name () - "Return the name to use as GIT_COMMITTER_NAME." - ; copied from log-edit - (or git-committer-name - (git-config "user.name") - (and (boundp 'add-log-full-name) add-log-full-name) - (and (fboundp 'user-full-name) (user-full-name)) - (and (boundp 'user-full-name) user-full-name))) - -(defun git-get-committer-email () - "Return the email address to use as GIT_COMMITTER_EMAIL." - ; copied from log-edit - (or git-committer-email - (git-config "user.email") - (and (boundp 'add-log-mailing-address) add-log-mailing-address) - (and (fboundp 'user-mail-address) (user-mail-address)) - (and (boundp 'user-mail-address) user-mail-address))) - -(defun git-get-commits-coding-system () - "Return the coding system to use for commits." - (let ((repo-config (git-config "i18n.commitencoding"))) - (or git-commits-coding-system - (and repo-config - (fboundp 'locale-charset-to-coding-system) - (locale-charset-to-coding-system repo-config)) - 'utf-8))) - -(defun git-get-logoutput-coding-system () - "Return the coding system used for git-log output." - (let ((repo-config (or (git-config "i18n.logoutputencoding") - (git-config "i18n.commitencoding")))) - (or git-commits-coding-system - (and repo-config - (fboundp 'locale-charset-to-coding-system) - (locale-charset-to-coding-system repo-config)) - 'utf-8))) - -(defun git-escape-file-name (name) - "Escape a file name if necessary." - (if (string-match "[\n\t\"\\]" name) - (concat "\"" - (mapconcat (lambda (c) - (case c - (?\n "\\n") - (?\t "\\t") - (?\\ "\\\\") - (?\" "\\\"") - (t (char-to-string c)))) - name "") - "\"") - name)) - -(defun git-success-message (text files) - "Print a success message after having handled FILES." - (let ((n (length files))) - (if (equal n 1) - (message "%s %s" text (car files)) - (message "%s %d files" text n)))) - -(defun git-get-top-dir (dir) - "Retrieve the top-level directory of a git tree." - (let ((cdup (with-output-to-string - (with-current-buffer standard-output - (cd dir) - (unless (eq 0 (git-call-process t "rev-parse" "--show-cdup")) - (error "cannot find top-level git tree for %s." dir)))))) - (expand-file-name (concat (file-name-as-directory dir) - (car (split-string cdup "\n")))))) - -;stolen from pcl-cvs -(defun git-append-to-ignore (file) - "Add a file name to the ignore file in its directory." - (let* ((fullname (expand-file-name file)) - (dir (file-name-directory fullname)) - (name (file-name-nondirectory fullname)) - (ignore-name (expand-file-name git-per-dir-ignore-file dir)) - (created (not (file-exists-p ignore-name)))) - (save-window-excursion - (set-buffer (find-file-noselect ignore-name)) - (goto-char (point-max)) - (unless (zerop (current-column)) (insert "\n")) - (insert "/" name "\n") - (sort-lines nil (point-min) (point-max)) - (save-buffer)) - (when created - (git-call-process nil "update-index" "--add" "--" (file-relative-name ignore-name))) - (git-update-status-files (list (file-relative-name ignore-name))))) - -; propertize definition for XEmacs, stolen from erc-compat -(eval-when-compile - (unless (fboundp 'propertize) - (defun propertize (string &rest props) - (let ((string (copy-sequence string))) - (while props - (put-text-property 0 (length string) (nth 0 props) (nth 1 props) string) - (setq props (cddr props))) - string)))) - -;;;; Wrappers for basic git commands -;;;; ------------------------------------------------------------ - -(defun git-rev-parse (rev) - "Parse a revision name and return its SHA1." - (git-get-string-sha1 - (git-call-process-string "rev-parse" rev))) - -(defun git-config (key) - "Retrieve the value associated to KEY in the git repository config file." - (let ((str (git-call-process-string "config" key))) - (and str (car (split-string str "\n"))))) - -(defun git-symbolic-ref (ref) - "Wrapper for the git-symbolic-ref command." - (let ((str (git-call-process-string "symbolic-ref" ref))) - (and str (car (split-string str "\n"))))) - -(defun git-update-ref (ref newval &optional oldval reason) - "Update a reference by calling git-update-ref." - (let ((args (and oldval (list oldval)))) - (when newval (push newval args)) - (push ref args) - (when reason - (push reason args) - (push "-m" args)) - (unless newval (push "-d" args)) - (apply 'git-call-process-display-error "update-ref" args))) - -(defun git-for-each-ref (&rest specs) - "Return a list of refs using git-for-each-ref. -Each entry is a cons of (SHORT-NAME . FULL-NAME)." - (let (refs) - (with-temp-buffer - (apply #'git-call-process t "for-each-ref" "--format=%(refname)" specs) - (goto-char (point-min)) - (while (re-search-forward "^[^/\n]+/[^/\n]+/\\(.+\\)$" nil t) - (push (cons (match-string 1) (match-string 0)) refs))) - (nreverse refs))) - -(defun git-read-tree (tree &optional index-file) - "Read a tree into the index file." - (let ((process-environment - (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) process-environment))) - (apply 'git-call-process-display-error "read-tree" (if tree (list tree))))) - -(defun git-write-tree (&optional index-file) - "Call git-write-tree and return the resulting tree SHA1 as a string." - (let ((process-environment - (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) process-environment))) - (git-get-string-sha1 - (git-call-process-string-display-error "write-tree")))) - -(defun git-commit-tree (buffer tree parent) - "Create a commit and possibly update HEAD. -Create a commit with the message in BUFFER using the tree with hash TREE. -Use PARENT as the parent of the new commit. If PARENT is the current \"HEAD\", -update the \"HEAD\" reference to the new commit." - (let ((author-name (git-get-committer-name)) - (author-email (git-get-committer-email)) - (subject "commit (initial): ") - author-date log-start log-end args coding-system-for-write) - (when parent - (setq subject "commit: ") - (push "-p" args) - (push parent args)) - (with-current-buffer buffer - (goto-char (point-min)) - (if - (setq log-start (re-search-forward (concat "^" (regexp-quote git-log-msg-separator) "\n") nil t)) - (save-restriction - (narrow-to-region (point-min) log-start) - (goto-char (point-min)) - (when (re-search-forward "^Author: +\\(.*?\\) *<\\(.*\\)> *$" nil t) - (setq author-name (match-string 1) - author-email (match-string 2))) - (goto-char (point-min)) - (when (re-search-forward "^Date: +\\(.*\\)$" nil t) - (setq author-date (match-string 1))) - (goto-char (point-min)) - (when (re-search-forward "^Merge: +\\(.*\\)" nil t) - (setq subject "commit (merge): ") - (dolist (parent (split-string (match-string 1) " +" t)) - (push "-p" args) - (push parent args)))) - (setq log-start (point-min))) - (setq log-end (point-max)) - (goto-char log-start) - (when (re-search-forward ".*$" nil t) - (setq subject (concat subject (match-string 0)))) - (setq coding-system-for-write buffer-file-coding-system)) - (let ((commit - (git-get-string-sha1 - (let ((env `(("GIT_AUTHOR_NAME" . ,author-name) - ("GIT_AUTHOR_EMAIL" . ,author-email) - ("GIT_COMMITTER_NAME" . ,(git-get-committer-name)) - ("GIT_COMMITTER_EMAIL" . ,(git-get-committer-email))))) - (when author-date (push `("GIT_AUTHOR_DATE" . ,author-date) env)) - (apply #'git-run-command-region - buffer log-start log-end env - "commit-tree" tree (nreverse args)))))) - (when commit (git-update-ref "HEAD" commit parent subject)) - commit))) - -(defun git-empty-db-p () - "Check if the git db is empty (no commit done yet)." - (not (eq 0 (git-call-process nil "rev-parse" "--verify" "HEAD")))) - -(defun git-get-merge-heads () - "Retrieve the merge heads from the MERGE_HEAD file if present." - (let (heads) - (when (file-readable-p ".git/MERGE_HEAD") - (with-temp-buffer - (insert-file-contents ".git/MERGE_HEAD" nil nil nil t) - (goto-char (point-min)) - (while (re-search-forward "[0-9a-f]\\{40\\}" nil t) - (push (match-string 0) heads)))) - (nreverse heads))) - -(defun git-get-commit-description (commit) - "Get a one-line description of COMMIT." - (let ((coding-system-for-read (git-get-logoutput-coding-system))) - (let ((descr (git-call-process-string "log" "--max-count=1" "--pretty=oneline" commit))) - (if (and descr (string-match "\\`\\([0-9a-f]\\{40\\}\\) *\\(.*\\)$" descr)) - (concat (substring (match-string 1 descr) 0 10) " - " (match-string 2 descr)) - descr)))) - -;;;; File info structure -;;;; ------------------------------------------------------------ - -; fileinfo structure stolen from pcl-cvs -(defstruct (git-fileinfo - (:copier nil) - (:constructor git-create-fileinfo (state name &optional old-perm new-perm rename-state orig-name marked)) - (:conc-name git-fileinfo->)) - marked ;; t/nil - state ;; current state - name ;; file name - old-perm new-perm ;; permission flags - rename-state ;; rename or copy state - orig-name ;; original name for renames or copies - needs-update ;; whether file needs to be updated - needs-refresh) ;; whether file needs to be refreshed - -(defvar git-status nil) - -(defun git-set-fileinfo-state (info state) - "Set the state of a file info." - (unless (eq (git-fileinfo->state info) state) - (setf (git-fileinfo->state info) state - (git-fileinfo->new-perm info) (git-fileinfo->old-perm info) - (git-fileinfo->rename-state info) nil - (git-fileinfo->orig-name info) nil - (git-fileinfo->needs-update info) nil - (git-fileinfo->needs-refresh info) t))) - -(defun git-status-filenames-map (status func files &rest args) - "Apply FUNC to the status files names in the FILES list. -The list must be sorted." - (when files - (let ((file (pop files)) - (node (ewoc-nth status 0))) - (while (and file node) - (let* ((info (ewoc-data node)) - (name (git-fileinfo->name info))) - (if (string-lessp name file) - (setq node (ewoc-next status node)) - (if (string-equal name file) - (apply func info args)) - (setq file (pop files)))))))) - -(defun git-set-filenames-state (status files state) - "Set the state of a list of named files. The list must be sorted" - (when files - (git-status-filenames-map status #'git-set-fileinfo-state files state) - (unless state ;; delete files whose state has been set to nil - (ewoc-filter status (lambda (info) (git-fileinfo->state info)))))) - -(defun git-state-code (code) - "Convert from a string to a added/deleted/modified state." - (case (string-to-char code) - (?M 'modified) - (?? 'unknown) - (?A 'added) - (?D 'deleted) - (?U 'unmerged) - (?T 'modified) - (t nil))) - -(defun git-status-code-as-string (code) - "Format a git status code as string." - (case code - ('modified (propertize "Modified" 'face 'git-status-face)) - ('unknown (propertize "Unknown " 'face 'git-unknown-face)) - ('added (propertize "Added " 'face 'git-status-face)) - ('deleted (propertize "Deleted " 'face 'git-status-face)) - ('unmerged (propertize "Unmerged" 'face 'git-unmerged-face)) - ('uptodate (propertize "Uptodate" 'face 'git-uptodate-face)) - ('ignored (propertize "Ignored " 'face 'git-ignored-face)) - (t "? "))) - -(defun git-file-type-as-string (old-perm new-perm) - "Return a string describing the file type based on its permissions." - (let* ((old-type (lsh (or old-perm 0) -9)) - (new-type (lsh (or new-perm 0) -9)) - (str (case new-type - (64 ;; file - (case old-type - (64 nil) - (80 " (type change symlink -> file)") - (112 " (type change subproject -> file)"))) - (80 ;; symlink - (case old-type - (64 " (type change file -> symlink)") - (112 " (type change subproject -> symlink)") - (t " (symlink)"))) - (112 ;; subproject - (case old-type - (64 " (type change file -> subproject)") - (80 " (type change symlink -> subproject)") - (t " (subproject)"))) - (72 nil) ;; directory (internal, not a real git state) - (0 ;; deleted or unknown - (case old-type - (80 " (symlink)") - (112 " (subproject)"))) - (t (format " (unknown type %o)" new-type))))) - (cond (str (propertize str 'face 'git-status-face)) - ((eq new-type 72) "/") - (t "")))) - -(defun git-rename-as-string (info) - "Return a string describing the copy or rename associated with INFO, or an empty string if none." - (let ((state (git-fileinfo->rename-state info))) - (if state - (propertize - (concat " (" - (if (eq state 'copy) "copied from " - (if (eq (git-fileinfo->state info) 'added) "renamed from " - "renamed to ")) - (git-escape-file-name (git-fileinfo->orig-name info)) - ")") 'face 'git-status-face) - ""))) - -(defun git-permissions-as-string (old-perm new-perm) - "Format a permission change as string." - (propertize - (if (or (not old-perm) - (not new-perm) - (eq 0 (logand ?\111 (logxor old-perm new-perm)))) - " " - (if (eq 0 (logand ?\111 old-perm)) "+x" "-x")) - 'face 'git-permission-face)) - -(defun git-fileinfo-prettyprint (info) - "Pretty-printer for the git-fileinfo structure." - (let ((old-perm (git-fileinfo->old-perm info)) - (new-perm (git-fileinfo->new-perm info))) - (insert (concat " " (if (git-fileinfo->marked info) (propertize "*" 'face 'git-mark-face) " ") - " " (git-status-code-as-string (git-fileinfo->state info)) - " " (git-permissions-as-string old-perm new-perm) - " " (git-escape-file-name (git-fileinfo->name info)) - (git-file-type-as-string old-perm new-perm) - (git-rename-as-string info))))) - -(defun git-update-node-fileinfo (node info) - "Update the fileinfo of the specified node. The names are assumed to match already." - (let ((data (ewoc-data node))) - (setf - ;; preserve the marked flag - (git-fileinfo->marked info) (git-fileinfo->marked data) - (git-fileinfo->needs-update data) nil) - (when (not (equal info data)) - (setf (git-fileinfo->needs-refresh info) t - (ewoc-data node) info)))) - -(defun git-insert-info-list (status infolist files) - "Insert a sorted list of file infos in the status buffer, replacing existing ones if any." - (let* ((info (pop infolist)) - (node (ewoc-nth status 0)) - (name (and info (git-fileinfo->name info))) - remaining) - (while info - (let ((nodename (and node (git-fileinfo->name (ewoc-data node))))) - (while (and files (string-lessp (car files) name)) - (push (pop files) remaining)) - (when (and files (string-equal (car files) name)) - (setq files (cdr files))) - (cond ((not nodename) - (setq node (ewoc-enter-last status info)) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info)))) - ((string-lessp nodename name) - (setq node (ewoc-next status node))) - ((string-equal nodename name) - ;; preserve the marked flag - (git-update-node-fileinfo node info) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info)))) - (t - (setq node (ewoc-enter-before status node info)) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info))))))) - (nconc (nreverse remaining) files))) - -(defun git-run-diff-index (status files) - "Run git-diff-index on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "diff-index" "-z" "-M" "HEAD" "--" files) - (goto-char (point-min)) - (while (re-search-forward - ":\\([0-7]\\{6\\}\\) \\([0-7]\\{6\\}\\) [0-9a-f]\\{40\\} [0-9a-f]\\{40\\} \\(\\([ADMUT]\\)\0\\([^\0]+\\)\\|\\([CR]\\)[0-9]*\0\\([^\0]+\\)\0\\([^\0]+\\)\\)\0" - nil t 1) - (let ((old-perm (string-to-number (match-string 1) 8)) - (new-perm (string-to-number (match-string 2) 8)) - (state (or (match-string 4) (match-string 6))) - (name (or (match-string 5) (match-string 7))) - (new-name (match-string 8))) - (if new-name ; copy or rename - (if (eq ?C (string-to-char state)) - (push (git-create-fileinfo 'added new-name old-perm new-perm 'copy name) infolist) - (push (git-create-fileinfo 'deleted name 0 0 'rename new-name) infolist) - (push (git-create-fileinfo 'added new-name old-perm new-perm 'rename name) infolist)) - (push (git-create-fileinfo (git-state-code state) name old-perm new-perm) infolist))))) - (setq infolist (sort (nreverse infolist) - (lambda (info1 info2) - (string-lessp (git-fileinfo->name info1) - (git-fileinfo->name info2))))) - (git-insert-info-list status infolist files))) - -(defun git-find-status-file (status file) - "Find a given file in the status ewoc and return its node." - (let ((node (ewoc-nth status 0))) - (while (and node (not (string= file (git-fileinfo->name (ewoc-data node))))) - (setq node (ewoc-next status node))) - node)) - -(defun git-run-ls-files (status files default-state &rest options) - "Run git-ls-files on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" (append options (list "--") files)) - (goto-char (point-min)) - (while (re-search-forward "\\([^\0]*?\\)\\(/?\\)\0" nil t 1) - (let ((name (match-string 1))) - (push (git-create-fileinfo default-state name 0 - (if (string-equal "/" (match-string 2)) (lsh ?\110 9) 0)) - infolist)))) - (setq infolist (nreverse infolist)) ;; assume it is sorted already - (git-insert-info-list status infolist files))) - -(defun git-run-ls-files-cached (status files default-state) - "Run git-ls-files -c on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" "-s" "-c" "--" files) - (goto-char (point-min)) - (while (re-search-forward "\\([0-7]\\{6\\}\\) [0-9a-f]\\{40\\} 0\t\\([^\0]+\\)\0" nil t) - (let* ((new-perm (string-to-number (match-string 1) 8)) - (old-perm (if (eq default-state 'added) 0 new-perm)) - (name (match-string 2))) - (push (git-create-fileinfo default-state name old-perm new-perm) infolist)))) - (setq infolist (nreverse infolist)) ;; assume it is sorted already - (git-insert-info-list status infolist files))) - -(defun git-run-ls-unmerged (status files) - "Run git-ls-files -u on FILES and parse the results into STATUS." - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" "-u" "--" files) - (goto-char (point-min)) - (let (unmerged-files) - (while (re-search-forward "[0-7]\\{6\\} [0-9a-f]\\{40\\} [123]\t\\([^\0]+\\)\0" nil t) - (push (match-string 1) unmerged-files)) - (setq unmerged-files (nreverse unmerged-files)) ;; assume it is sorted already - (git-set-filenames-state status unmerged-files 'unmerged)))) - -(defun git-get-exclude-files () - "Get the list of exclude files to pass to git-ls-files." - (let (files - (config (git-config "core.excludesfile"))) - (when (file-readable-p ".git/info/exclude") - (push ".git/info/exclude" files)) - (when (and config (file-readable-p config)) - (push config files)) - files)) - -(defun git-run-ls-files-with-excludes (status files default-state &rest options) - "Run git-ls-files on FILES with appropriate --exclude-from options." - (let ((exclude-files (git-get-exclude-files))) - (apply #'git-run-ls-files status files default-state "--directory" "--no-empty-directory" - (concat "--exclude-per-directory=" git-per-dir-ignore-file) - (append options (mapcar (lambda (f) (concat "--exclude-from=" f)) exclude-files))))) - -(defun git-update-status-files (&optional files mark-files) - "Update the status of FILES from the index. -The FILES list must be sorted." - (unless git-status (error "Not in git-status buffer.")) - ;; set the needs-update flag on existing files - (if files - (git-status-filenames-map - git-status (lambda (info) (setf (git-fileinfo->needs-update info) t)) files) - (ewoc-map (lambda (info) (setf (git-fileinfo->needs-update info) t) nil) git-status) - (git-call-process nil "update-index" "--refresh") - (when git-show-uptodate - (git-run-ls-files-cached git-status nil 'uptodate))) - (let ((remaining-files - (if (git-empty-db-p) ; we need some special handling for an empty db - (git-run-ls-files-cached git-status files 'added) - (git-run-diff-index git-status files)))) - (git-run-ls-unmerged git-status files) - (when (or remaining-files (and git-show-unknown (not files))) - (setq remaining-files (git-run-ls-files-with-excludes git-status remaining-files 'unknown "-o"))) - (when (or remaining-files (and git-show-ignored (not files))) - (setq remaining-files (git-run-ls-files-with-excludes git-status remaining-files 'ignored "-o" "-i"))) - (unless files - (setq remaining-files (git-get-filenames (ewoc-collect git-status #'git-fileinfo->needs-update)))) - (when remaining-files - (setq remaining-files (git-run-ls-files-cached git-status remaining-files 'uptodate))) - (git-set-filenames-state git-status remaining-files nil) - (when mark-files (git-mark-files git-status files)) - (git-refresh-files) - (git-refresh-ewoc-hf git-status))) - -(defun git-mark-files (status files) - "Mark all the specified FILES, and unmark the others." - (let ((file (and files (pop files))) - (node (ewoc-nth status 0))) - (while node - (let ((info (ewoc-data node))) - (if (and file (string-equal (git-fileinfo->name info) file)) - (progn - (unless (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) t) - (setf (git-fileinfo->needs-refresh info) t)) - (setq file (pop files)) - (setq node (ewoc-next status node))) - (when (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) nil) - (setf (git-fileinfo->needs-refresh info) t)) - (if (and file (string-lessp file (git-fileinfo->name info))) - (setq file (pop files)) - (setq node (ewoc-next status node)))))))) - -(defun git-marked-files () - "Return a list of all marked files, or if none a list containing just the file at cursor position." - (unless git-status (error "Not in git-status buffer.")) - (or (ewoc-collect git-status (lambda (info) (git-fileinfo->marked info))) - (list (ewoc-data (ewoc-locate git-status))))) - -(defun git-marked-files-state (&rest states) - "Return a sorted list of marked files that are in the specified states." - (let ((files (git-marked-files)) - result) - (dolist (info files) - (when (memq (git-fileinfo->state info) states) - (push info result))) - (nreverse result))) - -(defun git-refresh-files () - "Refresh all files that need it and clear the needs-refresh flag." - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map - (lambda (info) - (let ((refresh (git-fileinfo->needs-refresh info))) - (setf (git-fileinfo->needs-refresh info) nil) - refresh)) - git-status) - ; move back to goal column - (when goal-column (move-to-column goal-column))) - -(defun git-refresh-ewoc-hf (status) - "Refresh the ewoc header and footer." - (let ((branch (git-symbolic-ref "HEAD")) - (head (if (git-empty-db-p) "Nothing committed yet" - (git-get-commit-description "HEAD"))) - (merge-heads (git-get-merge-heads))) - (ewoc-set-hf status - (format "Directory: %s\nBranch: %s\nHead: %s%s\n" - default-directory - (if branch - (if (string-match "^refs/heads/" branch) - (substring branch (match-end 0)) - branch) - "none (detached HEAD)") - head - (if merge-heads - (concat "\nMerging: " - (mapconcat (lambda (str) (git-get-commit-description str)) merge-heads "\n ")) - "")) - (if (ewoc-nth status 0) "" " No changes.")))) - -(defun git-get-filenames (files) - (mapcar (lambda (info) (git-fileinfo->name info)) files)) - -(defun git-update-index (index-file files) - "Run git-update-index on a list of files." - (let ((process-environment (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) - process-environment)) - added deleted modified) - (dolist (info files) - (case (git-fileinfo->state info) - ('added (push info added)) - ('deleted (push info deleted)) - ('modified (push info modified)))) - (and - (or (not added) (apply #'git-call-process-display-error "update-index" "--add" "--" (git-get-filenames added))) - (or (not deleted) (apply #'git-call-process-display-error "update-index" "--remove" "--" (git-get-filenames deleted))) - (or (not modified) (apply #'git-call-process-display-error "update-index" "--" (git-get-filenames modified)))))) - -(defun git-run-pre-commit-hook () - "Run the pre-commit hook if any." - (unless git-status (error "Not in git-status buffer.")) - (let ((files (git-marked-files-state 'added 'deleted 'modified))) - (or (not files) - (not (file-executable-p ".git/hooks/pre-commit")) - (let ((index-file (make-temp-file "gitidx"))) - (unwind-protect - (let ((head-tree (unless (git-empty-db-p) (git-rev-parse "HEAD^{tree}")))) - (git-read-tree head-tree index-file) - (git-update-index index-file files) - (git-run-hook "pre-commit" `(("GIT_INDEX_FILE" . ,index-file)))) - (delete-file index-file)))))) - -(defun git-do-commit () - "Perform the actual commit using the current buffer as log message." - (interactive) - (let ((buffer (current-buffer)) - (index-file (make-temp-file "gitidx"))) - (with-current-buffer log-edit-parent-buffer - (if (git-marked-files-state 'unmerged) - (message "You cannot commit unmerged files, resolve them first.") - (unwind-protect - (let ((files (git-marked-files-state 'added 'deleted 'modified)) - head tree head-tree) - (unless (git-empty-db-p) - (setq head (git-rev-parse "HEAD") - head-tree (git-rev-parse "HEAD^{tree}"))) - (message "Running git commit...") - (when - (and - (git-read-tree head-tree index-file) - (git-update-index nil files) ;update both the default index - (git-update-index index-file files) ;and the temporary one - (setq tree (git-write-tree index-file))) - (if (or (not (string-equal tree head-tree)) - (yes-or-no-p "The tree was not modified, do you really want to perform an empty commit? ")) - (let ((commit (git-commit-tree buffer tree head))) - (when commit - (condition-case nil (delete-file ".git/MERGE_HEAD") (error nil)) - (condition-case nil (delete-file ".git/MERGE_MSG") (error nil)) - (with-current-buffer buffer (erase-buffer)) - (git-update-status-files (git-get-filenames files)) - (git-call-process nil "rerere") - (git-call-process nil "gc" "--auto") - (message "Committed %s." commit) - (git-run-hook "post-commit" nil))) - (message "Commit aborted.")))) - (delete-file index-file)))))) - - -;;;; Interactive functions -;;;; ------------------------------------------------------------ - -(defun git-mark-file () - "Mark the file that the cursor is on and move to the next one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) t) - (ewoc-invalidate git-status pos) - (ewoc-goto-next git-status 1))) - -(defun git-unmark-file () - "Unmark the file that the cursor is on and move to the next one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) nil) - (ewoc-invalidate git-status pos) - (ewoc-goto-next git-status 1))) - -(defun git-unmark-file-up () - "Unmark the file that the cursor is on and move to the previous one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) nil) - (ewoc-invalidate git-status pos) - (ewoc-goto-prev git-status 1))) - -(defun git-mark-all () - "Mark all files." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (unless (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) t))) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-unmark-all () - "Unmark all files." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (when (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) nil) - t)) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-toggle-all-marks () - "Toggle all file marks." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (setf (git-fileinfo->marked info) (not (git-fileinfo->marked info))) t) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-next-file (&optional n) - "Move the selection down N files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (ewoc-goto-next git-status n)) - -(defun git-prev-file (&optional n) - "Move the selection up N files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (ewoc-goto-prev git-status n)) - -(defun git-next-unmerged-file (&optional n) - "Move the selection down N unmerged files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (let* ((last (ewoc-locate git-status)) - (node (ewoc-next git-status last))) - (while (and node (> n 0)) - (when (eq 'unmerged (git-fileinfo->state (ewoc-data node))) - (setq n (1- n)) - (setq last node)) - (setq node (ewoc-next git-status node))) - (ewoc-goto-node git-status last))) - -(defun git-prev-unmerged-file (&optional n) - "Move the selection up N unmerged files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (let* ((last (ewoc-locate git-status)) - (node (ewoc-prev git-status last))) - (while (and node (> n 0)) - (when (eq 'unmerged (git-fileinfo->state (ewoc-data node))) - (setq n (1- n)) - (setq last node)) - (setq node (ewoc-prev git-status node))) - (ewoc-goto-node git-status last))) - -(defun git-insert-file (file) - "Insert file(s) into the git-status buffer." - (interactive "fInsert file: ") - (git-update-status-files (list (file-relative-name file)))) - -(defun git-add-file () - "Add marked file(s) to the index cache." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'unknown 'ignored 'unmerged)))) - ;; FIXME: add support for directories - (unless files - (push (file-relative-name (read-file-name "File to add: " nil nil t)) files)) - (when (apply 'git-call-process-display-error "update-index" "--add" "--" files) - (git-update-status-files files) - (git-success-message "Added" files)))) - -(defun git-ignore-file () - "Add marked file(s) to the ignore list." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'unknown)))) - (unless files - (push (file-relative-name (read-file-name "File to ignore: " nil nil t)) files)) - (dolist (f files) (git-append-to-ignore f)) - (git-update-status-files files) - (git-success-message "Ignored" files))) - -(defun git-remove-file () - "Remove the marked file(s)." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'added 'modified 'unknown 'uptodate 'ignored)))) - (unless files - (push (file-relative-name (read-file-name "File to remove: " nil nil t)) files)) - (if (yes-or-no-p - (if (cdr files) - (format "Remove %d files? " (length files)) - (format "Remove %s? " (car files)))) - (progn - (dolist (name files) - (ignore-errors - (if (file-directory-p name) - (delete-directory name) - (delete-file name)))) - (when (apply 'git-call-process-display-error "update-index" "--remove" "--" files) - (git-update-status-files files) - (git-success-message "Removed" files))) - (message "Aborting")))) - -(defun git-revert-file () - "Revert changes to the marked file(s)." - (interactive) - (let ((files (git-marked-files-state 'added 'deleted 'modified 'unmerged)) - added modified) - (when (and files - (yes-or-no-p - (if (cdr files) - (format "Revert %d files? " (length files)) - (format "Revert %s? " (git-fileinfo->name (car files)))))) - (dolist (info files) - (case (git-fileinfo->state info) - ('added (push (git-fileinfo->name info) added)) - ('deleted (push (git-fileinfo->name info) modified)) - ('unmerged (push (git-fileinfo->name info) modified)) - ('modified (push (git-fileinfo->name info) modified)))) - ;; check if a buffer contains one of the files and isn't saved - (dolist (file modified) - (let ((buffer (get-file-buffer file))) - (when (and buffer (buffer-modified-p buffer)) - (error "Buffer %s is modified. Please kill or save modified buffers before reverting." (buffer-name buffer))))) - (let ((ok (and - (or (not added) - (apply 'git-call-process-display-error "update-index" "--force-remove" "--" added)) - (or (not modified) - (apply 'git-call-process-display-error "checkout" "HEAD" modified)))) - (names (git-get-filenames files))) - (git-update-status-files names) - (when ok - (dolist (file modified) - (let ((buffer (get-file-buffer file))) - (when buffer (with-current-buffer buffer (revert-buffer t t t))))) - (git-success-message "Reverted" names)))))) - -(defun git-remove-handled () - "Remove handled files from the status list." - (interactive) - (ewoc-filter git-status - (lambda (info) - (case (git-fileinfo->state info) - ('ignored git-show-ignored) - ('uptodate git-show-uptodate) - ('unknown git-show-unknown) - (t t)))) - (unless (ewoc-nth git-status 0) ; refresh header if list is empty - (git-refresh-ewoc-hf git-status))) - -(defun git-toggle-show-uptodate () - "Toogle the option for showing up-to-date files." - (interactive) - (if (setq git-show-uptodate (not git-show-uptodate)) - (git-refresh-status) - (git-remove-handled))) - -(defun git-toggle-show-ignored () - "Toogle the option for showing ignored files." - (interactive) - (if (setq git-show-ignored (not git-show-ignored)) - (progn - (message "Inserting ignored files...") - (git-run-ls-files-with-excludes git-status nil 'ignored "-o" "-i") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - (message "Inserting ignored files...done")) - (git-remove-handled))) - -(defun git-toggle-show-unknown () - "Toogle the option for showing unknown files." - (interactive) - (if (setq git-show-unknown (not git-show-unknown)) - (progn - (message "Inserting unknown files...") - (git-run-ls-files-with-excludes git-status nil 'unknown "-o") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - (message "Inserting unknown files...done")) - (git-remove-handled))) - -(defun git-expand-directory (info) - "Expand the directory represented by INFO to list its files." - (when (eq (lsh (git-fileinfo->new-perm info) -9) ?\110) - (let ((dir (git-fileinfo->name info))) - (git-set-filenames-state git-status (list dir) nil) - (git-run-ls-files-with-excludes git-status (list (concat dir "/")) 'unknown "-o") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - t))) - -(defun git-setup-diff-buffer (buffer) - "Setup a buffer for displaying a diff." - (let ((dir default-directory)) - (with-current-buffer buffer - (diff-mode) - (goto-char (point-min)) - (setq default-directory dir) - (setq buffer-read-only t))) - (display-buffer buffer) - ; shrink window only if it displays the status buffer - (when (eq (window-buffer) (current-buffer)) - (shrink-window-if-larger-than-buffer))) - -(defun git-diff-file () - "Diff the marked file(s) against HEAD." - (interactive) - (let ((files (git-marked-files))) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-index" "-p" "-M" "HEAD" "--" (git-get-filenames files))))) - -(defun git-diff-file-merge-head (arg) - "Diff the marked file(s) against the first merge head (or the nth one with a numeric prefix)." - (interactive "p") - (let ((files (git-marked-files)) - (merge-heads (git-get-merge-heads))) - (unless merge-heads (error "No merge in progress")) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-index" "-p" "-M" - (or (nth (1- arg) merge-heads) "HEAD") "--" (git-get-filenames files))))) - -(defun git-diff-unmerged-file (stage) - "Diff the marked unmerged file(s) against the specified stage." - (let ((files (git-marked-files))) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-files" "-p" stage "--" (git-get-filenames files))))) - -(defun git-diff-file-base () - "Diff the marked unmerged file(s) against the common base file." - (interactive) - (git-diff-unmerged-file "-1")) - -(defun git-diff-file-mine () - "Diff the marked unmerged file(s) against my pre-merge version." - (interactive) - (git-diff-unmerged-file "-2")) - -(defun git-diff-file-other () - "Diff the marked unmerged file(s) against the other's pre-merge version." - (interactive) - (git-diff-unmerged-file "-3")) - -(defun git-diff-file-combined () - "Do a combined diff of the marked unmerged file(s)." - (interactive) - (git-diff-unmerged-file "-c")) - -(defun git-diff-file-idiff () - "Perform an interactive diff on the current file." - (interactive) - (let ((files (git-marked-files-state 'added 'deleted 'modified))) - (unless (eq 1 (length files)) - (error "Cannot perform an interactive diff on multiple files.")) - (let* ((filename (car (git-get-filenames files))) - (buff1 (find-file-noselect filename)) - (buff2 (git-run-command-buffer (concat filename ".~HEAD~") "cat-file" "blob" (concat "HEAD:" filename)))) - (ediff-buffers buff1 buff2)))) - -(defun git-log-file () - "Display a log of changes to the marked file(s)." - (interactive) - (let* ((files (git-marked-files)) - (coding-system-for-read git-commits-coding-system) - (buffer (apply #'git-run-command-buffer "*git-log*" "rev-list" "--pretty" "HEAD" "--" (git-get-filenames files)))) - (with-current-buffer buffer - ; (git-log-mode) FIXME: implement log mode - (goto-char (point-min)) - (setq buffer-read-only t)) - (display-buffer buffer))) - -(defun git-log-edit-files () - "Return a list of marked files for use in the log-edit buffer." - (with-current-buffer log-edit-parent-buffer - (git-get-filenames (git-marked-files-state 'added 'deleted 'modified)))) - -(defun git-log-edit-diff () - "Run a diff of the current files being committed from a log-edit buffer." - (with-current-buffer log-edit-parent-buffer - (git-diff-file))) - -(defun git-append-sign-off (name email) - "Append a Signed-off-by entry to the current buffer, avoiding duplicates." - (let ((sign-off (format "Signed-off-by: %s <%s>" name email)) - (case-fold-search t)) - (goto-char (point-min)) - (unless (re-search-forward (concat "^" (regexp-quote sign-off)) nil t) - (goto-char (point-min)) - (unless (re-search-forward "^Signed-off-by: " nil t) - (setq sign-off (concat "\n" sign-off))) - (goto-char (point-max)) - (insert sign-off "\n")))) - -(defun git-setup-log-buffer (buffer &optional merge-heads author-name author-email subject date msg) - "Setup the log buffer for a commit." - (unless git-status (error "Not in git-status buffer.")) - (let ((dir default-directory) - (committer-name (git-get-committer-name)) - (committer-email (git-get-committer-email)) - (sign-off git-append-signed-off-by)) - (with-current-buffer buffer - (cd dir) - (erase-buffer) - (insert - (propertize - (format "Author: %s <%s>\n%s%s" - (or author-name committer-name) - (or author-email committer-email) - (if date (format "Date: %s\n" date) "") - (if merge-heads - (format "Merge: %s\n" - (mapconcat 'identity merge-heads " ")) - "")) - 'face 'git-header-face) - (propertize git-log-msg-separator 'face 'git-separator-face) - "\n") - (when subject (insert subject "\n\n")) - (cond (msg (insert msg "\n")) - ((file-readable-p ".git/rebase-apply/msg") - (insert-file-contents ".git/rebase-apply/msg")) - ((file-readable-p ".git/MERGE_MSG") - (insert-file-contents ".git/MERGE_MSG"))) - ; delete empty lines at end - (goto-char (point-min)) - (when (re-search-forward "\n+\\'" nil t) - (replace-match "\n" t t)) - (when sign-off (git-append-sign-off committer-name committer-email))) - buffer)) - -(define-derived-mode git-log-edit-mode log-edit-mode "Git-Log-Edit" - "Major mode for editing git log messages. - -Set up git-specific `font-lock-keywords' for `log-edit-mode'." - (set (make-local-variable 'font-lock-defaults) - '(git-log-edit-font-lock-keywords t t))) - -(defun git-commit-file () - "Commit the marked file(s), asking for a commit message." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (when (git-run-pre-commit-hook) - (let ((buffer (get-buffer-create "*git-commit*")) - (coding-system (git-get-commits-coding-system)) - author-name author-email subject date) - (when (eq 0 (buffer-size buffer)) - (when (file-readable-p ".git/rebase-apply/info") - (with-temp-buffer - (insert-file-contents ".git/rebase-apply/info") - (goto-char (point-min)) - (when (re-search-forward "^Author: \\(.*\\)\nEmail: \\(.*\\)$" nil t) - (setq author-name (match-string 1)) - (setq author-email (match-string 2))) - (goto-char (point-min)) - (when (re-search-forward "^Subject: \\(.*\\)$" nil t) - (setq subject (match-string 1))) - (goto-char (point-min)) - (when (re-search-forward "^Date: \\(.*\\)$" nil t) - (setq date (match-string 1))))) - (git-setup-log-buffer buffer (git-get-merge-heads) author-name author-email subject date)) - (if (boundp 'log-edit-diff-function) - (log-edit 'git-do-commit nil '((log-edit-listfun . git-log-edit-files) - (log-edit-diff-function . git-log-edit-diff)) buffer 'git-log-edit-mode) - (log-edit 'git-do-commit nil 'git-log-edit-files buffer - 'git-log-edit-mode)) - (setq paragraph-separate (concat (regexp-quote git-log-msg-separator) "$\\|Author: \\|Date: \\|Merge: \\|Signed-off-by: \\|\f\\|[ ]*$")) - (setq buffer-file-coding-system coding-system) - (re-search-forward (regexp-quote (concat git-log-msg-separator "\n")) nil t)))) - -(defun git-setup-commit-buffer (commit) - "Setup the commit buffer with the contents of COMMIT." - (let (parents author-name author-email subject date msg) - (with-temp-buffer - (let ((coding-system (git-get-logoutput-coding-system))) - (git-call-process t "log" "-1" "--pretty=medium" "--abbrev=40" commit) - (goto-char (point-min)) - (when (re-search-forward "^Merge: *\\(.*\\)$" nil t) - (setq parents (cdr (split-string (match-string 1) " +")))) - (when (re-search-forward "^Author: *\\(.*\\) <\\(.*\\)>$" nil t) - (setq author-name (match-string 1)) - (setq author-email (match-string 2))) - (when (re-search-forward "^Date: *\\(.*\\)$" nil t) - (setq date (match-string 1))) - (while (re-search-forward "^ \\(.*\\)$" nil t) - (push (match-string 1) msg)) - (setq msg (nreverse msg)) - (setq subject (pop msg)) - (while (and msg (zerop (length (car msg))) (pop msg))))) - (git-setup-log-buffer (get-buffer-create "*git-commit*") - parents author-name author-email subject date - (mapconcat #'identity msg "\n")))) - -(defun git-get-commit-files (commit) - "Retrieve a sorted list of files modified by COMMIT." - (let (files) - (with-temp-buffer - (git-call-process t "diff-tree" "-m" "-r" "-z" "--name-only" "--no-commit-id" "--root" commit) - (goto-char (point-min)) - (while (re-search-forward "\\([^\0]*\\)\0" nil t 1) - (push (match-string 1) files))) - (sort files #'string-lessp))) - -(defun git-read-commit-name (prompt &optional default) - "Ask for a commit name, with completion for local branch, remote branch and tag." - (completing-read prompt - (list* "HEAD" "ORIG_HEAD" "FETCH_HEAD" (mapcar #'car (git-for-each-ref))) - nil nil nil nil default)) - -(defun git-checkout (branch &optional merge) - "Checkout a branch, tag, or any commit. -Use a prefix arg if git should merge while checking out." - (interactive - (list (git-read-commit-name "Checkout: ") - current-prefix-arg)) - (unless git-status (error "Not in git-status buffer.")) - (let ((args (list branch "--"))) - (when merge (push "-m" args)) - (when (apply #'git-call-process-display-error "checkout" args) - (git-update-status-files)))) - -(defun git-branch (branch) - "Create a branch from the current HEAD and switch to it." - (interactive (list (git-read-commit-name "Branch: "))) - (unless git-status (error "Not in git-status buffer.")) - (if (git-rev-parse (concat "refs/heads/" branch)) - (if (yes-or-no-p (format "Branch %s already exists, replace it? " branch)) - (and (git-call-process-display-error "branch" "-f" branch) - (git-call-process-display-error "checkout" branch)) - (message "Canceled.")) - (git-call-process-display-error "checkout" "-b" branch)) - (git-refresh-ewoc-hf git-status)) - -(defun git-amend-commit () - "Undo the last commit on HEAD, and set things up to commit an -amended version of it." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (when (git-empty-db-p) (error "No commit to amend.")) - (let* ((commit (git-rev-parse "HEAD")) - (files (git-get-commit-files commit))) - (when (if (git-rev-parse "HEAD^") - (git-call-process-display-error "reset" "--soft" "HEAD^") - (and (git-update-ref "ORIG_HEAD" commit) - (git-update-ref "HEAD" nil commit))) - (git-update-status-files files t) - (git-setup-commit-buffer commit) - (git-commit-file)))) - -(defun git-cherry-pick-commit (arg) - "Cherry-pick a commit." - (interactive (list (git-read-commit-name "Cherry-pick commit: "))) - (unless git-status (error "Not in git-status buffer.")) - (let ((commit (git-rev-parse (concat arg "^0")))) - (unless commit (error "Not a valid commit '%s'." arg)) - (when (git-rev-parse (concat commit "^2")) - (error "Cannot cherry-pick a merge commit.")) - (let ((files (git-get-commit-files commit)) - (ok (git-call-process-display-error "cherry-pick" "-n" commit))) - (git-update-status-files files ok) - (with-current-buffer (git-setup-commit-buffer commit) - (goto-char (point-min)) - (if (re-search-forward "^\n*Signed-off-by:" nil t 1) - (goto-char (match-beginning 0)) - (goto-char (point-max))) - (insert "(cherry picked from commit " commit ")\n")) - (when ok (git-commit-file))))) - -(defun git-revert-commit (arg) - "Revert a commit." - (interactive (list (git-read-commit-name "Revert commit: "))) - (unless git-status (error "Not in git-status buffer.")) - (let ((commit (git-rev-parse (concat arg "^0")))) - (unless commit (error "Not a valid commit '%s'." arg)) - (when (git-rev-parse (concat commit "^2")) - (error "Cannot revert a merge commit.")) - (let ((files (git-get-commit-files commit)) - (subject (git-get-commit-description commit)) - (ok (git-call-process-display-error "revert" "-n" commit))) - (git-update-status-files files ok) - (when (string-match "^[0-9a-f]+ - \\(.*\\)$" subject) - (setq subject (match-string 1 subject))) - (git-setup-log-buffer (get-buffer-create "*git-commit*") - (git-get-merge-heads) nil nil (format "Revert \"%s\"" subject) nil - (format "This reverts commit %s.\n" commit)) - (when ok (git-commit-file))))) - -(defun git-find-file () - "Visit the current file in its own buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (unless (git-expand-directory info) - (find-file (git-fileinfo->name info)) - (when (eq 'unmerged (git-fileinfo->state info)) - (smerge-mode 1))))) - -(defun git-find-file-other-window () - "Visit the current file in its own buffer in another window." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (find-file-other-window (git-fileinfo->name info)) - (when (eq 'unmerged (git-fileinfo->state info)) - (smerge-mode)))) - -(defun git-find-file-imerge () - "Visit the current file in interactive merge mode." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (find-file (git-fileinfo->name info)) - (smerge-ediff))) - -(defun git-view-file () - "View the current file in its own buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (view-file (git-fileinfo->name info)))) - -(defun git-refresh-status () - "Refresh the git status buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (message "Refreshing git status...") - (git-update-status-files) - (message "Refreshing git status...done")) - -(defun git-status-quit () - "Quit git-status mode." - (interactive) - (bury-buffer)) - -;;;; Major Mode -;;;; ------------------------------------------------------------ - -(defvar git-status-mode-hook nil - "Run after `git-status-mode' is setup.") - -(defvar git-status-mode-map nil - "Keymap for git major mode.") - -(defvar git-status nil - "List of all files managed by the git-status mode.") - -(unless git-status-mode-map - (let ((map (make-keymap)) - (commit-map (make-sparse-keymap)) - (diff-map (make-sparse-keymap)) - (toggle-map (make-sparse-keymap))) - (suppress-keymap map) - (define-key map "?" 'git-help) - (define-key map "h" 'git-help) - (define-key map " " 'git-next-file) - (define-key map "a" 'git-add-file) - (define-key map "c" 'git-commit-file) - (define-key map "\C-c" commit-map) - (define-key map "d" diff-map) - (define-key map "=" 'git-diff-file) - (define-key map "f" 'git-find-file) - (define-key map "\r" 'git-find-file) - (define-key map "g" 'git-refresh-status) - (define-key map "i" 'git-ignore-file) - (define-key map "I" 'git-insert-file) - (define-key map "l" 'git-log-file) - (define-key map "m" 'git-mark-file) - (define-key map "M" 'git-mark-all) - (define-key map "n" 'git-next-file) - (define-key map "N" 'git-next-unmerged-file) - (define-key map "o" 'git-find-file-other-window) - (define-key map "p" 'git-prev-file) - (define-key map "P" 'git-prev-unmerged-file) - (define-key map "q" 'git-status-quit) - (define-key map "r" 'git-remove-file) - (define-key map "t" toggle-map) - (define-key map "T" 'git-toggle-all-marks) - (define-key map "u" 'git-unmark-file) - (define-key map "U" 'git-revert-file) - (define-key map "v" 'git-view-file) - (define-key map "x" 'git-remove-handled) - (define-key map "\C-?" 'git-unmark-file-up) - (define-key map "\M-\C-?" 'git-unmark-all) - ; the commit submap - (define-key commit-map "\C-a" 'git-amend-commit) - (define-key commit-map "\C-b" 'git-branch) - (define-key commit-map "\C-o" 'git-checkout) - (define-key commit-map "\C-p" 'git-cherry-pick-commit) - (define-key commit-map "\C-v" 'git-revert-commit) - ; the diff submap - (define-key diff-map "b" 'git-diff-file-base) - (define-key diff-map "c" 'git-diff-file-combined) - (define-key diff-map "=" 'git-diff-file) - (define-key diff-map "e" 'git-diff-file-idiff) - (define-key diff-map "E" 'git-find-file-imerge) - (define-key diff-map "h" 'git-diff-file-merge-head) - (define-key diff-map "m" 'git-diff-file-mine) - (define-key diff-map "o" 'git-diff-file-other) - ; the toggle submap - (define-key toggle-map "u" 'git-toggle-show-uptodate) - (define-key toggle-map "i" 'git-toggle-show-ignored) - (define-key toggle-map "k" 'git-toggle-show-unknown) - (define-key toggle-map "m" 'git-toggle-all-marks) - (setq git-status-mode-map map)) - (easy-menu-define git-menu git-status-mode-map - "Git Menu" - `("Git" - ["Refresh" git-refresh-status t] - ["Commit" git-commit-file t] - ["Checkout..." git-checkout t] - ["New Branch..." git-branch t] - ["Cherry-pick Commit..." git-cherry-pick-commit t] - ["Revert Commit..." git-revert-commit t] - ("Merge" - ["Next Unmerged File" git-next-unmerged-file t] - ["Prev Unmerged File" git-prev-unmerged-file t] - ["Interactive Merge File" git-find-file-imerge t] - ["Diff Against Common Base File" git-diff-file-base t] - ["Diff Combined" git-diff-file-combined t] - ["Diff Against Merge Head" git-diff-file-merge-head t] - ["Diff Against Mine" git-diff-file-mine t] - ["Diff Against Other" git-diff-file-other t]) - "--------" - ["Add File" git-add-file t] - ["Revert File" git-revert-file t] - ["Ignore File" git-ignore-file t] - ["Remove File" git-remove-file t] - ["Insert File" git-insert-file t] - "--------" - ["Find File" git-find-file t] - ["View File" git-view-file t] - ["Diff File" git-diff-file t] - ["Interactive Diff File" git-diff-file-idiff t] - ["Log" git-log-file t] - "--------" - ["Mark" git-mark-file t] - ["Mark All" git-mark-all t] - ["Unmark" git-unmark-file t] - ["Unmark All" git-unmark-all t] - ["Toggle All Marks" git-toggle-all-marks t] - ["Hide Handled Files" git-remove-handled t] - "--------" - ["Show Uptodate Files" git-toggle-show-uptodate :style toggle :selected git-show-uptodate] - ["Show Ignored Files" git-toggle-show-ignored :style toggle :selected git-show-ignored] - ["Show Unknown Files" git-toggle-show-unknown :style toggle :selected git-show-unknown] - "--------" - ["Quit" git-status-quit t]))) - - -;; git mode should only run in the *git status* buffer -(put 'git-status-mode 'mode-class 'special) - -(defun git-status-mode () - "Major mode for interacting with Git. -Commands: -\\{git-status-mode-map}" - (kill-all-local-variables) - (buffer-disable-undo) - (setq mode-name "git status" - major-mode 'git-status-mode - goal-column 17 - buffer-read-only t) - (use-local-map git-status-mode-map) - (let ((buffer-read-only nil)) - (erase-buffer) - (let ((status (ewoc-create 'git-fileinfo-prettyprint "" ""))) - (set (make-local-variable 'git-status) status)) - (set (make-local-variable 'list-buffers-directory) default-directory) - (make-local-variable 'git-show-uptodate) - (make-local-variable 'git-show-ignored) - (make-local-variable 'git-show-unknown) - (run-hooks 'git-status-mode-hook))) - -(defun git-find-status-buffer (dir) - "Find the git status buffer handling a specified directory." - (let ((list (buffer-list)) - (fulldir (expand-file-name dir)) - found) - (while (and list (not found)) - (let ((buffer (car list))) - (with-current-buffer buffer - (when (and list-buffers-directory - (string-equal fulldir (expand-file-name list-buffers-directory)) - (eq major-mode 'git-status-mode)) - (setq found buffer)))) - (setq list (cdr list))) - found)) - -(defun git-status (dir) - "Entry point into git-status mode." - (interactive "DSelect directory: ") - (setq dir (git-get-top-dir dir)) - (if (file-exists-p (concat (file-name-as-directory dir) ".git")) - (let ((buffer (or (and git-reuse-status-buffer (git-find-status-buffer dir)) - (create-file-buffer (expand-file-name "*git-status*" dir))))) - (switch-to-buffer buffer) - (cd dir) - (git-status-mode) - (git-refresh-status) - (goto-char (point-min)) - (add-hook 'after-save-hook 'git-update-saved-file)) - (message "%s is not a git working tree." dir))) - -(defun git-update-saved-file () - "Update the corresponding git-status buffer when a file is saved. -Meant to be used in `after-save-hook'." - (let* ((file (expand-file-name buffer-file-name)) - (dir (condition-case nil (git-get-top-dir (file-name-directory file)) (error nil))) - (buffer (and dir (git-find-status-buffer dir)))) - (when buffer - (with-current-buffer buffer - (let ((filename (file-relative-name file dir))) - ; skip files located inside the .git directory - (unless (string-match "^\\.git/" filename) - (git-call-process nil "add" "--refresh" "--" filename) - (git-update-status-files (list filename)))))))) - -(defun git-help () - "Display help for Git mode." - (interactive) - (describe-function 'git-status-mode)) - -(provide 'git) -;;; git.el ends here -- 2.15.1.424.g9478a66081 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH v2] git{,-blame}.el: remove old bitrotting Emacs code 2018-03-10 18:45 ` [PATCH v3] git{,-blame}.el: remove old bitrotting Emacs code Ævar Arnfjörð Bjarmason @ 2018-03-13 18:53 ` Ævar Arnfjörð Bjarmason 2018-03-13 22:14 ` Junio C Hamano 2018-03-27 16:57 ` [PATCH v3] " Jonathan Nieder 1 sibling, 1 reply; 26+ messages in thread From: Ævar Arnfjörð Bjarmason @ 2018-03-13 18:53 UTC (permalink / raw) To: Junio C Hamano Cc: Martin Ågren, Git Mailing List, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal On Tue, Mar 13 2018, Junio C. Hamano jotted: > Martin Ågren <martin.agren@gmail.com> writes: > >>> +Emacs's own support for Git got better than what was offered by these >>> +modules, or was superseded by popular 3rd-party Git modes such as >>> +Magit. >> >> This somehow reads like "Emacs's own support ... was superseded ...". >> Maybe that's what you mean, but i'm not sure. Perhaps s/, was superseded >> by/. There are also/. > > I think "There are also" is way better. If we really want to sy > superseded, perhaps "The features these modules offered were > superseded by Emacs's own support in VC mode, and popular > third-party Git modes e.g. Magit" is what we can say. I sent a v3 a few days ago which addressed this, it's at 20180310184545.16950-1-avarab@gmail.com (https://public-inbox.org/git/20180310184545.16950-1-avarab@gmail.com/) but I see that I screwd up the In-Reply-To (I still don't have this fully automated) so that wasn't part of this thread, sorry. That changes this wording, among other fixes (noted in the tbdiff). ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] git{,-blame}.el: remove old bitrotting Emacs code 2018-03-13 18:53 ` [PATCH v2] " Ævar Arnfjörð Bjarmason @ 2018-03-13 22:14 ` Junio C Hamano 0 siblings, 0 replies; 26+ messages in thread From: Junio C Hamano @ 2018-03-13 22:14 UTC (permalink / raw) To: Ævar Arnfjörð Bjarmason Cc: Martin Ågren, Git Mailing List, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal Ævar Arnfjörð Bjarmason <avarab@gmail.com> writes: > I sent a v3 a few days ago which addressed this, it's at > 20180310184545.16950-1-avarab@gmail.com Thanks, I did look at that version but did not act on it immediately and then forgot about it. Queued. ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v3] git{,-blame}.el: remove old bitrotting Emacs code 2018-03-10 18:45 ` [PATCH v3] git{,-blame}.el: remove old bitrotting Emacs code Ævar Arnfjörð Bjarmason 2018-03-13 18:53 ` [PATCH v2] " Ævar Arnfjörð Bjarmason @ 2018-03-27 16:57 ` Jonathan Nieder 2018-04-11 20:42 ` [PATCH v4] " Ævar Arnfjörð Bjarmason 1 sibling, 1 reply; 26+ messages in thread From: Jonathan Nieder @ 2018-03-27 16:57 UTC (permalink / raw) To: Ævar Arnfjörð Bjarmason Cc: git, Junio C Hamano, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal, Kyle Meyer, Martin Ågren, Ami Fischman Hi, Ævar Arnfjörð Bjarmason wrote[1]: > The git-blame.el mode has been superseded by Emacs's own > vc-annotate (invoked by C-x v g). Users of the git.el mode are now > much better off using either Magit or the Git backend for Emacs's own > VC mode. > > These modes were added over 10 years ago when Emacs's own Git support > was much less mature, and there weren't other mature modes in the wild > or shipped with Emacs itself. > > These days these modes have few if any users, and users of git aren't > well served by us shipping these (some OS's install them alongside git > by default, which is confusing and leads users astray). > > So let's remove these per Alexandre Julliard's message to the > ML[1]. If someone still wants these for some reason they're better > served by hosting these elsewhere (e.g. on ELPA), instead of us > distributing them with git. The trouble with removing these so abruptly is that it makes for a bad user experience. Warning (initialization): An error occurred while loading ‘/home/jrn/.emacs’: File error: Cannot open load file, No such file or directory, git In some sense that is the distributor's fault: just because Git upstream stops removing the git.el file doesn't mean that the distributor needs to. But the same thing would happen if the user symlinked git.el into a place that emacs could find when using upstream Git directly. And we are putting the distributor in a bad place. Ami Fischman (cc-ed) writes: | IMO a placeholder git.el that did something like: | | (error "git.el is no more; replace (require 'git) with (require 'magit) or | simply delete the former in your initialization file(s)") | | ideally with a pointer to a short URL explaining the rationale would have | been fine. | (note that though I've seen | https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=893734 I'm _still_ unclear | as to why the change was made; you might want to clarify in that bug and | point to it from this, or something else) What do you think? Would adding such a placeholder during a transitional period work well for you? Thanks, Jonathan [1] https://public-inbox.org/git/20180310184545.16950-1-avarab@gmail.com/ ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v4] git{,-blame}.el: remove old bitrotting Emacs code 2018-03-27 16:57 ` [PATCH v3] " Jonathan Nieder @ 2018-04-11 20:42 ` Ævar Arnfjörð Bjarmason 2018-04-12 2:19 ` Junio C Hamano 0 siblings, 1 reply; 26+ messages in thread From: Ævar Arnfjörð Bjarmason @ 2018-04-11 20:42 UTC (permalink / raw) To: git Cc: Junio C Hamano, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal, Kyle Meyer, Martin Ågren, Ami Fischman, Jonathan Nieder, Ævar Arnfjörð Bjarmason The git-blame.el mode has been superseded by Emacs's own vc-annotate (invoked by C-x v g). Users of the git.el mode are now much better off using either Magit or the Git backend for Emacs's own VC mode. These modes were added over 10 years ago when Emacs's own Git support was much less mature, and there weren't other mature modes in the wild or shipped with Emacs itself. These days these modes have few if any users, and users of git aren't well served by us shipping these (some OS's install them alongside git by default, which is confusing and leads users astray). So let's remove these per Alexandre Julliard's message to the ML[1]. If someone still wants these for some reason they're better served by hosting these elsewhere (e.g. on ELPA), instead of us distributing them with git. However, since downstream packagers such as Debian are packaging this as git-el it's less disruptive to still carry these files as Elisp code that'll error out with a message suggesting alternatives, rather than drop the files entirely[2]. Then rather than receive a cryptic load error when they upgrade existing users will get an error directing them to the README file, or to just stop requiring these modes. I think it makes sense to link to GitHub's hosting of contrib/emacs/README (which'll be updated by the time users see this) so they don't have to hunt down the packaged README on their local system. 1. "Re: [PATCH] git.el: handle default excludesfile properly" (87muzlwhb0.fsf@winehq.org) -- https://public-inbox.org/git/87muzlwhb0.fsf@winehq.org/ 2. "Re: [PATCH v3] git{,-blame}.el: remove old bitrotting Emacs code" (20180327165751.GA4343@aiede.svl.corp.google.com) -- https://public-inbox.org/git/20180327165751.GA4343@aiede.svl.corp.google.com/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> --- On Tue, Mar 27 2018, Jonathan Nieder wrote: > The trouble with removing these so abruptly is that it makes for a bad > user experience. > [...] Indeed. Sorry for taking so long to act on this. Haven't had much time for git recently. Now we still ship these Elisp files, but they just error out with a message as suggested. Junio: This should address your note about this series in the last What's Cooking. tbdiff with v3: 1: 5bc3d3848d ! 1: 7556844084 git{,-blame}.el: remove old bitrotting Emacs code @@ -20,9 +20,25 @@ served by hosting these elsewhere (e.g. on ELPA), instead of us distributing them with git. + However, since downstream packagers such as Debian are packaging this + as git-el it's less disruptive to still carry these files as Elisp + code that'll error out with a message suggesting alternatives, rather + than drop the files entirely[2]. + + Then rather than receive a cryptic load error when they upgrade + existing users will get an error directing them to the README file, or + to just stop requiring these modes. I think it makes sense to link to + GitHub's hosting of contrib/emacs/README (which'll be updated by the + time users see this) so they don't have to hunt down the packaged + README on their local system. + 1. "Re: [PATCH] git.el: handle default excludesfile properly" (87muzlwhb0.fsf@winehq.org) -- https://public-inbox.org/git/87muzlwhb0.fsf@winehq.org/ + + 2. "Re: [PATCH v3] git{,-blame}.el: remove old bitrotting Emacs + code" (20180327165751.GA4343@aiede.svl.corp.google.com) -- + https://public-inbox.org/git/20180327165751.GA4343@aiede.svl.corp.google.com/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> @@ -109,9 +125,8 @@ diff --git a/contrib/emacs/git-blame.el b/contrib/emacs/git-blame.el -deleted file mode 100644 --- a/contrib/emacs/git-blame.el -+++ /dev/null ++++ b/contrib/emacs/git-blame.el @@ -;;; git-blame.el --- Minor mode for incremental blame for Git -*- coding: utf-8 -*- -;; @@ -596,11 +611,16 @@ -(provide 'git-blame) - -;;; git-blame.el ends here ++(error "git-blame.el no longer ships with git. It's recommended ++to replace its use with Emacs's own vc-annotate. See ++contrib/emacs/README in git's ++sources (https://github.com/git/git/blob/master/contrib/emacs/README) ++for more info on suggested alternatives and for why this ++happened.") diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el -deleted file mode 100644 --- a/contrib/emacs/git.el -+++ /dev/null ++++ b/contrib/emacs/git.el @@ -;;; git.el --- A user interface for git - @@ -2306,3 +2326,9 @@ - -(provide 'git) -;;; git.el ends here ++(error "git.el no longer ships with git. It's recommended to ++replace its use with Magit, or simply delete references to git.el ++in your initialization file(s). See contrib/emacs/README in git's ++sources (https://github.com/git/git/blob/master/contrib/emacs/README) ++for suggested alternatives and for why this happened. Emacs's own ++VC mode and Magit are viable alternatives.") contrib/emacs/.gitignore | 1 - contrib/emacs/Makefile | 21 - contrib/emacs/README | 32 +- contrib/emacs/git-blame.el | 489 +---------- contrib/emacs/git.el | 1710 +----------------------------------- 5 files changed, 25 insertions(+), 2228 deletions(-) delete mode 100644 contrib/emacs/.gitignore delete mode 100644 contrib/emacs/Makefile diff --git a/contrib/emacs/.gitignore b/contrib/emacs/.gitignore deleted file mode 100644 index c531d9867f..0000000000 --- a/contrib/emacs/.gitignore +++ /dev/null @@ -1 +0,0 @@ -*.elc diff --git a/contrib/emacs/Makefile b/contrib/emacs/Makefile deleted file mode 100644 index 24d9312941..0000000000 --- a/contrib/emacs/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -## Build and install stuff - -EMACS = emacs - -ELC = git.elc git-blame.elc -INSTALL ?= install -INSTALL_ELC = $(INSTALL) -m 644 -prefix ?= $(HOME) -emacsdir = $(prefix)/share/emacs/site-lisp -RM ?= rm -f - -all: $(ELC) - -install: all - $(INSTALL) -d $(DESTDIR)$(emacsdir) - $(INSTALL_ELC) $(ELC:.elc=.el) $(ELC) $(DESTDIR)$(emacsdir) - -%.elc: %.el - $(EMACS) -batch -f batch-byte-compile $< - -clean:; $(RM) $(ELC) diff --git a/contrib/emacs/README b/contrib/emacs/README index 82368bdbff..977a16f1e3 100644 --- a/contrib/emacs/README +++ b/contrib/emacs/README @@ -1,30 +1,24 @@ -This directory contains various modules for Emacs support. +This directory used to contain various modules for Emacs support. -To make the modules available to Emacs, you should add this directory -to your load-path, and then require the modules you want. This can be -done by adding to your .emacs something like this: +These were added shortly after Git was first released. Since then +Emacs's own support for Git got better than what was offered by these +modes. There are also popular 3rd-party Git modes such as Magit which +offer replacements for these. - (add-to-list 'load-path ".../git/contrib/emacs") - (require 'git) - (require 'git-blame) - - -The following modules are available: +The following modules were available, and can be dug up from the Git +history: * git.el: - Status manager that displays the state of all the files of the - project, and provides easy access to the most frequently used git - commands. The user interface is as far as possible compatible with - the pcl-cvs mode. It can be started with `M-x git-status'. + Wrapper for "git status" that provided access to other git commands. + + Modern alternatives to this include Magit, and VC mode that ships + with Emacs. * git-blame.el: - Emacs implementation of incremental git-blame. When you turn it on - while viewing a file, the editor buffer will be updated by setting - the background of individual lines to a color that reflects which - commit it comes from. And when you move around the buffer, a - one-line summary will be shown in the echo area. + A wrapper for "git blame" written before Emacs's own vc-annotate + mode learned to invoke git-blame, which can be done via C-x v g. * vc-git.el: diff --git a/contrib/emacs/git-blame.el b/contrib/emacs/git-blame.el index 510e0f7103..6a8a2b8ff1 100644 --- a/contrib/emacs/git-blame.el +++ b/contrib/emacs/git-blame.el @@ -1,483 +1,6 @@ -;;; git-blame.el --- Minor mode for incremental blame for Git -*- coding: utf-8 -*- -;; -;; Copyright (C) 2007 David Kågedal -;; -;; Authors: David Kågedal <davidk@lysator.liu.se> -;; Created: 31 Jan 2007 -;; Message-ID: <87iren2vqx.fsf@morpheus.local> -;; License: GPL -;; Keywords: git, version control, release management -;; -;; Compatibility: Emacs21, Emacs22 and EmacsCVS -;; Git 1.5 and up - -;; This file is *NOT* part of GNU Emacs. -;; This file is distributed under the same terms as GNU Emacs. - -;; This program is free software; you can redistribute it and/or -;; modify it under the terms of the GNU General Public License as -;; published by the Free Software Foundation; either version 2 of -;; the License, or (at your option) any later version. - -;; This program is distributed in the hope that it will be -;; useful, but WITHOUT ANY WARRANTY; without even the implied -;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR -;; PURPOSE. See the GNU General Public License for more details. - -;; You should have received a copy of the GNU General Public -;; License along with this program; if not, see -;; <http://www.gnu.org/licenses/>. - -;; http://www.fsf.org/copyleft/gpl.html - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;;; Commentary: -;; -;; Here is an Emacs implementation of incremental git-blame. When you -;; turn it on while viewing a file, the editor buffer will be updated by -;; setting the background of individual lines to a color that reflects -;; which commit it comes from. And when you move around the buffer, a -;; one-line summary will be shown in the echo area. - -;;; Installation: -;; -;; To use this package, put it somewhere in `load-path' (or add -;; directory with git-blame.el to `load-path'), and add the following -;; line to your .emacs: -;; -;; (require 'git-blame) -;; -;; If you do not want to load this package before it is necessary, you -;; can make use of the `autoload' feature, e.g. by adding to your .emacs -;; the following lines -;; -;; (autoload 'git-blame-mode "git-blame" -;; "Minor mode for incremental blame for Git." t) -;; -;; Then first use of `M-x git-blame-mode' would load the package. - -;;; Compatibility: -;; -;; It requires GNU Emacs 21 or later and Git 1.5.0 and up -;; -;; If you'are using Emacs 20, try changing this: -;; -;; (overlay-put ovl 'face (list :background -;; (cdr (assq 'color (cddddr info))))) -;; -;; to -;; -;; (overlay-put ovl 'face (cons 'background-color -;; (cdr (assq 'color (cddddr info))))) - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;;; Code: - -(eval-when-compile (require 'cl)) ; to use `push', `pop' -(require 'format-spec) - -(defface git-blame-prefix-face - '((((background dark)) (:foreground "gray" - :background "black")) - (((background light)) (:foreground "gray" - :background "white")) - (t (:weight bold))) - "The face used for the hash prefix." - :group 'git-blame) - -(defgroup git-blame nil - "A minor mode showing Git blame information." - :group 'git - :link '(function-link git-blame-mode)) - - -(defcustom git-blame-use-colors t - "Use colors to indicate commits in `git-blame-mode'." - :type 'boolean - :group 'git-blame) - -(defcustom git-blame-prefix-format - "%h %20A:" - "The format of the prefix added to each line in `git-blame' -mode. The format is passed to `format-spec' with the following format keys: - - %h - the abbreviated hash - %H - the full hash - %a - the author name - %A - the author email - %c - the committer name - %C - the committer email - %s - the commit summary -" - :group 'git-blame) - -(defcustom git-blame-mouseover-format - "%h %a %A: %s" - "The format of the description shown when pointing at a line in -`git-blame' mode. The format string is passed to `format-spec' -with the following format keys: - - %h - the abbreviated hash - %H - the full hash - %a - the author name - %A - the author email - %c - the committer name - %C - the committer email - %s - the commit summary -" - :group 'git-blame) - - -(defun git-blame-color-scale (&rest elements) - "Given a list, returns a list of triples formed with each -elements of the list. - -a b => bbb bba bab baa abb aba aaa aab" - (let (result) - (dolist (a elements) - (dolist (b elements) - (dolist (c elements) - (setq result (cons (format "#%s%s%s" a b c) result))))) - result)) - -;; (git-blame-color-scale "0c" "04" "24" "1c" "2c" "34" "14" "3c") => -;; ("#3c3c3c" "#3c3c14" "#3c3c34" "#3c3c2c" "#3c3c1c" "#3c3c24" -;; "#3c3c04" "#3c3c0c" "#3c143c" "#3c1414" "#3c1434" "#3c142c" ...) - -(defmacro git-blame-random-pop (l) - "Select a random element from L and returns it. Also remove -selected element from l." - ;; only works on lists with unique elements - `(let ((e (elt ,l (random (length ,l))))) - (setq ,l (remove e ,l)) - e)) - -(defvar git-blame-log-oneline-format - "format:[%cr] %cn: %s" - "*Formatting option used for describing current line in the minibuffer. - -This option is used to pass to git log --pretty= command-line option, -and describe which commit the current line was made.") - -(defvar git-blame-dark-colors - (git-blame-color-scale "0c" "04" "24" "1c" "2c" "34" "14" "3c") - "*List of colors (format #RGB) to use in a dark environment. - -To check out the list, evaluate (list-colors-display git-blame-dark-colors).") - -(defvar git-blame-light-colors - (git-blame-color-scale "c4" "d4" "cc" "dc" "f4" "e4" "fc" "ec") - "*List of colors (format #RGB) to use in a light environment. - -To check out the list, evaluate (list-colors-display git-blame-light-colors).") - -(defvar git-blame-colors '() - "Colors used by git-blame. The list is built once when activating git-blame -minor mode.") - -(defvar git-blame-ancient-color "dark green" - "*Color to be used for ancient commit.") - -(defvar git-blame-autoupdate t - "*Automatically update the blame display while editing") - -(defvar git-blame-proc nil - "The running git-blame process") -(make-variable-buffer-local 'git-blame-proc) - -(defvar git-blame-overlays nil - "The git-blame overlays used in the current buffer.") -(make-variable-buffer-local 'git-blame-overlays) - -(defvar git-blame-cache nil - "A cache of git-blame information for the current buffer") -(make-variable-buffer-local 'git-blame-cache) - -(defvar git-blame-idle-timer nil - "An idle timer that updates the blame") -(make-variable-buffer-local 'git-blame-cache) - -(defvar git-blame-update-queue nil - "A queue of update requests") -(make-variable-buffer-local 'git-blame-update-queue) - -;; FIXME: docstrings -(defvar git-blame-file nil) -(defvar git-blame-current nil) - -(defvar git-blame-mode nil) -(make-variable-buffer-local 'git-blame-mode) - -(defvar git-blame-mode-line-string " blame" - "String to display on the mode line when git-blame is active.") - -(or (assq 'git-blame-mode minor-mode-alist) - (setq minor-mode-alist - (cons '(git-blame-mode git-blame-mode-line-string) minor-mode-alist))) - -;;;###autoload -(defun git-blame-mode (&optional arg) - "Toggle minor mode for displaying Git blame - -With prefix ARG, turn the mode on if ARG is positive." - (interactive "P") - (cond - ((null arg) - (if git-blame-mode (git-blame-mode-off) (git-blame-mode-on))) - ((> (prefix-numeric-value arg) 0) (git-blame-mode-on)) - (t (git-blame-mode-off)))) - -(defun git-blame-mode-on () - "Turn on git-blame mode. - -See also function `git-blame-mode'." - (make-local-variable 'git-blame-colors) - (if git-blame-autoupdate - (add-hook 'after-change-functions 'git-blame-after-change nil t) - (remove-hook 'after-change-functions 'git-blame-after-change t)) - (git-blame-cleanup) - (let ((bgmode (cdr (assoc 'background-mode (frame-parameters))))) - (if (eq bgmode 'dark) - (setq git-blame-colors git-blame-dark-colors) - (setq git-blame-colors git-blame-light-colors))) - (setq git-blame-cache (make-hash-table :test 'equal)) - (setq git-blame-mode t) - (git-blame-run)) - -(defun git-blame-mode-off () - "Turn off git-blame mode. - -See also function `git-blame-mode'." - (git-blame-cleanup) - (if git-blame-idle-timer (cancel-timer git-blame-idle-timer)) - (setq git-blame-mode nil)) - -;;;###autoload -(defun git-reblame () - "Recalculate all blame information in the current buffer" - (interactive) - (unless git-blame-mode - (error "Git-blame is not active")) - - (git-blame-cleanup) - (git-blame-run)) - -(defun git-blame-run (&optional startline endline) - (if git-blame-proc - ;; Should maybe queue up a new run here - (message "Already running git blame") - (let ((display-buf (current-buffer)) - (blame-buf (get-buffer-create - (concat " git blame for " (buffer-name)))) - (args '("--incremental" "--contents" "-"))) - (if startline - (setq args (append args - (list "-L" (format "%d,%d" startline endline))))) - (setq args (append args - (list (file-name-nondirectory buffer-file-name)))) - (setq git-blame-proc - (apply 'start-process - "git-blame" blame-buf - "git" "blame" - args)) - (with-current-buffer blame-buf - (erase-buffer) - (make-local-variable 'git-blame-file) - (make-local-variable 'git-blame-current) - (setq git-blame-file display-buf) - (setq git-blame-current nil)) - (set-process-filter git-blame-proc 'git-blame-filter) - (set-process-sentinel git-blame-proc 'git-blame-sentinel) - (process-send-region git-blame-proc (point-min) (point-max)) - (process-send-eof git-blame-proc)))) - -(defun remove-git-blame-text-properties (start end) - (let ((modified (buffer-modified-p)) - (inhibit-read-only t)) - (remove-text-properties start end '(point-entered nil)) - (set-buffer-modified-p modified))) - -(defun git-blame-cleanup () - "Remove all blame properties" - (mapc 'delete-overlay git-blame-overlays) - (setq git-blame-overlays nil) - (remove-git-blame-text-properties (point-min) (point-max))) - -(defun git-blame-update-region (start end) - "Rerun blame to get updates between START and END" - (let ((overlays (overlays-in start end))) - (while overlays - (let ((overlay (pop overlays))) - (if (< (overlay-start overlay) start) - (setq start (overlay-start overlay))) - (if (> (overlay-end overlay) end) - (setq end (overlay-end overlay))) - (setq git-blame-overlays (delete overlay git-blame-overlays)) - (delete-overlay overlay)))) - (remove-git-blame-text-properties start end) - ;; We can be sure that start and end are at line breaks - (git-blame-run (1+ (count-lines (point-min) start)) - (count-lines (point-min) end))) - -(defun git-blame-sentinel (proc status) - (with-current-buffer (process-buffer proc) - (with-current-buffer git-blame-file - (setq git-blame-proc nil) - (if git-blame-update-queue - (git-blame-delayed-update)))) - ;;(kill-buffer (process-buffer proc)) - ;;(message "git blame finished") - ) - -(defvar in-blame-filter nil) - -(defun git-blame-filter (proc str) - (with-current-buffer (process-buffer proc) - (save-excursion - (goto-char (process-mark proc)) - (insert-before-markers str) - (goto-char (point-min)) - (unless in-blame-filter - (let ((more t) - (in-blame-filter t)) - (while more - (setq more (git-blame-parse)))))))) - -(defun git-blame-parse () - (cond ((looking-at "\\([0-9a-f]\\{40\\}\\) \\([0-9]+\\) \\([0-9]+\\) \\([0-9]+\\)\n") - (let ((hash (match-string 1)) - (src-line (string-to-number (match-string 2))) - (res-line (string-to-number (match-string 3))) - (num-lines (string-to-number (match-string 4)))) - (delete-region (point) (match-end 0)) - (setq git-blame-current (list (git-blame-new-commit hash) - src-line res-line num-lines))) - t) - ((looking-at "\\([a-z-]+\\) \\(.+\\)\n") - (let ((key (match-string 1)) - (value (match-string 2))) - (delete-region (point) (match-end 0)) - (git-blame-add-info (car git-blame-current) key value) - (when (string= key "filename") - (git-blame-create-overlay (car git-blame-current) - (caddr git-blame-current) - (cadddr git-blame-current)) - (setq git-blame-current nil))) - t) - (t - nil))) - -(defun git-blame-new-commit (hash) - (with-current-buffer git-blame-file - (or (gethash hash git-blame-cache) - ;; Assign a random color to each new commit info - ;; Take care not to select the same color multiple times - (let* ((color (if git-blame-colors - (git-blame-random-pop git-blame-colors) - git-blame-ancient-color)) - (info `(,hash (color . ,color)))) - (puthash hash info git-blame-cache) - info)))) - -(defun git-blame-create-overlay (info start-line num-lines) - (with-current-buffer git-blame-file - (save-excursion - (let ((inhibit-point-motion-hooks t) - (inhibit-modification-hooks t)) - (goto-char (point-min)) - (forward-line (1- start-line)) - (let* ((start (point)) - (end (progn (forward-line num-lines) (point))) - (ovl (make-overlay start end)) - (hash (car info)) - (spec `((?h . ,(substring hash 0 6)) - (?H . ,hash) - (?a . ,(git-blame-get-info info 'author)) - (?A . ,(git-blame-get-info info 'author-mail)) - (?c . ,(git-blame-get-info info 'committer)) - (?C . ,(git-blame-get-info info 'committer-mail)) - (?s . ,(git-blame-get-info info 'summary))))) - (push ovl git-blame-overlays) - (overlay-put ovl 'git-blame info) - (overlay-put ovl 'help-echo - (format-spec git-blame-mouseover-format spec)) - (if git-blame-use-colors - (overlay-put ovl 'face (list :background - (cdr (assq 'color (cdr info)))))) - (overlay-put ovl 'line-prefix - (propertize (format-spec git-blame-prefix-format spec) - 'face 'git-blame-prefix-face))))))) - -(defun git-blame-add-info (info key value) - (nconc info (list (cons (intern key) value)))) - -(defun git-blame-get-info (info key) - (cdr (assq key (cdr info)))) - -(defun git-blame-current-commit () - (let ((info (get-char-property (point) 'git-blame))) - (if info - (car info) - (error "No commit info")))) - -(defun git-describe-commit (hash) - (with-temp-buffer - (call-process "git" nil t nil - "log" "-1" - (concat "--pretty=" git-blame-log-oneline-format) - hash) - (buffer-substring (point-min) (point-max)))) - -(defvar git-blame-last-identification nil) -(make-variable-buffer-local 'git-blame-last-identification) -(defun git-blame-identify (&optional hash) - (interactive) - (let ((info (gethash (or hash (git-blame-current-commit)) git-blame-cache))) - (when (and info (not (eq info git-blame-last-identification))) - (message "%s" (nth 4 info)) - (setq git-blame-last-identification info)))) - -;; (defun git-blame-after-save () -;; (when git-blame-mode -;; (git-blame-cleanup) -;; (git-blame-run))) -;; (add-hook 'after-save-hook 'git-blame-after-save) - -(defun git-blame-after-change (start end length) - (when git-blame-mode - (git-blame-enq-update start end))) - -(defvar git-blame-last-update nil) -(make-variable-buffer-local 'git-blame-last-update) -(defun git-blame-enq-update (start end) - "Mark the region between START and END as needing blame update" - ;; Try to be smart and avoid multiple callouts for sequential - ;; editing - (cond ((and git-blame-last-update - (= start (cdr git-blame-last-update))) - (setcdr git-blame-last-update end)) - ((and git-blame-last-update - (= end (car git-blame-last-update))) - (setcar git-blame-last-update start)) - (t - (setq git-blame-last-update (cons start end)) - (setq git-blame-update-queue (nconc git-blame-update-queue - (list git-blame-last-update))))) - (unless (or git-blame-proc git-blame-idle-timer) - (setq git-blame-idle-timer - (run-with-idle-timer 0.5 nil 'git-blame-delayed-update)))) - -(defun git-blame-delayed-update () - (setq git-blame-idle-timer nil) - (if git-blame-update-queue - (let ((first (pop git-blame-update-queue)) - (inhibit-point-motion-hooks t)) - (git-blame-update-region (car first) (cdr first))))) - -(provide 'git-blame) - -;;; git-blame.el ends here +(error "git-blame.el no longer ships with git. It's recommended +to replace its use with Emacs's own vc-annotate. See +contrib/emacs/README in git's +sources (https://github.com/git/git/blob/master/contrib/emacs/README) +for more info on suggested alternatives and for why this +happened.") diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index 97919f2d73..03f926281f 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -1,1704 +1,6 @@ -;;; git.el --- A user interface for git - -;; Copyright (C) 2005, 2006, 2007, 2008, 2009 Alexandre Julliard <julliard@winehq.org> - -;; Version: 1.0 - -;; This program is free software; you can redistribute it and/or -;; modify it under the terms of the GNU General Public License as -;; published by the Free Software Foundation; either version 2 of -;; the License, or (at your option) any later version. -;; -;; This program is distributed in the hope that it will be -;; useful, but WITHOUT ANY WARRANTY; without even the implied -;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR -;; PURPOSE. See the GNU General Public License for more details. -;; -;; You should have received a copy of the GNU General Public -;; License along with this program; if not, see -;; <http://www.gnu.org/licenses/>. - -;;; Commentary: - -;; This file contains an interface for the git version control -;; system. It provides easy access to the most frequently used git -;; commands. The user interface is as far as possible identical to -;; that of the PCL-CVS mode. -;; -;; To install: put this file on the load-path and place the following -;; in your .emacs file: -;; -;; (require 'git) -;; -;; To start: `M-x git-status' -;; -;; TODO -;; - diff against other branch -;; - renaming files from the status buffer -;; - creating tags -;; - fetch/pull -;; - revlist browser -;; - git-show-branch browser -;; - -;;; Compatibility: -;; -;; This file works on GNU Emacs 21 or later. It may work on older -;; versions but this is not guaranteed. -;; -;; It may work on XEmacs 21, provided that you first install the ewoc -;; and log-edit packages. -;; - -(eval-when-compile (require 'cl)) -(require 'ewoc) -(require 'log-edit) -(require 'easymenu) - - -;;;; Customizations -;;;; ------------------------------------------------------------ - -(defgroup git nil - "A user interface for the git versioning system." - :group 'tools) - -(defcustom git-committer-name nil - "User name to use for commits. -The default is to fall back to the repository config, -then to `add-log-full-name' and then to `user-full-name'." - :group 'git - :type '(choice (const :tag "Default" nil) - (string :tag "Name"))) - -(defcustom git-committer-email nil - "Email address to use for commits. -The default is to fall back to the git repository config, -then to `add-log-mailing-address' and then to `user-mail-address'." - :group 'git - :type '(choice (const :tag "Default" nil) - (string :tag "Email"))) - -(defcustom git-commits-coding-system nil - "Default coding system for the log message of git commits." - :group 'git - :type '(choice (const :tag "From repository config" nil) - (coding-system))) - -(defcustom git-append-signed-off-by nil - "Whether to append a Signed-off-by line to the commit message before editing." - :group 'git - :type 'boolean) - -(defcustom git-reuse-status-buffer t - "Whether `git-status' should try to reuse an existing buffer -if there is already one that displays the same directory." - :group 'git - :type 'boolean) - -(defcustom git-per-dir-ignore-file ".gitignore" - "Name of the per-directory ignore file." - :group 'git - :type 'string) - -(defcustom git-show-uptodate nil - "Whether to display up-to-date files." - :group 'git - :type 'boolean) - -(defcustom git-show-ignored nil - "Whether to display ignored files." - :group 'git - :type 'boolean) - -(defcustom git-show-unknown t - "Whether to display unknown files." - :group 'git - :type 'boolean) - - -(defface git-status-face - '((((class color) (background light)) (:foreground "purple")) - (((class color) (background dark)) (:foreground "salmon"))) - "Git mode face used to highlight added and modified files." - :group 'git) - -(defface git-unmerged-face - '((((class color) (background light)) (:foreground "red" :bold t)) - (((class color) (background dark)) (:foreground "red" :bold t))) - "Git mode face used to highlight unmerged files." - :group 'git) - -(defface git-unknown-face - '((((class color) (background light)) (:foreground "goldenrod" :bold t)) - (((class color) (background dark)) (:foreground "goldenrod" :bold t))) - "Git mode face used to highlight unknown files." - :group 'git) - -(defface git-uptodate-face - '((((class color) (background light)) (:foreground "grey60")) - (((class color) (background dark)) (:foreground "grey40"))) - "Git mode face used to highlight up-to-date files." - :group 'git) - -(defface git-ignored-face - '((((class color) (background light)) (:foreground "grey60")) - (((class color) (background dark)) (:foreground "grey40"))) - "Git mode face used to highlight ignored files." - :group 'git) - -(defface git-mark-face - '((((class color) (background light)) (:foreground "red" :bold t)) - (((class color) (background dark)) (:foreground "tomato" :bold t))) - "Git mode face used for the file marks." - :group 'git) - -(defface git-header-face - '((((class color) (background light)) (:foreground "blue")) - (((class color) (background dark)) (:foreground "blue"))) - "Git mode face used for commit headers." - :group 'git) - -(defface git-separator-face - '((((class color) (background light)) (:foreground "brown")) - (((class color) (background dark)) (:foreground "brown"))) - "Git mode face used for commit separator." - :group 'git) - -(defface git-permission-face - '((((class color) (background light)) (:foreground "green" :bold t)) - (((class color) (background dark)) (:foreground "green" :bold t))) - "Git mode face used for permission changes." - :group 'git) - - -;;;; Utilities -;;;; ------------------------------------------------------------ - -(defconst git-log-msg-separator "--- log message follows this line ---") - -(defvar git-log-edit-font-lock-keywords - `(("^\\(Author:\\|Date:\\|Merge:\\|Signed-off-by:\\)\\(.*\\)$" - (1 font-lock-keyword-face) - (2 font-lock-function-name-face)) - (,(concat "^\\(" (regexp-quote git-log-msg-separator) "\\)$") - (1 font-lock-comment-face)))) - -(defun git-get-env-strings (env) - "Build a list of NAME=VALUE strings from a list of environment strings." - (mapcar (lambda (entry) (concat (car entry) "=" (cdr entry))) env)) - -(defun git-call-process (buffer &rest args) - "Wrapper for call-process that sets environment strings." - (apply #'call-process "git" nil buffer nil args)) - -(defun git-call-process-display-error (&rest args) - "Wrapper for call-process that displays error messages." - (let* ((dir default-directory) - (buffer (get-buffer-create "*Git Command Output*")) - (ok (with-current-buffer buffer - (let ((default-directory dir) - (buffer-read-only nil)) - (erase-buffer) - (eq 0 (apply #'git-call-process (list buffer t) args)))))) - (unless ok (display-message-or-buffer buffer)) - ok)) - -(defun git-call-process-string (&rest args) - "Wrapper for call-process that returns the process output as a string, -or nil if the git command failed." - (with-temp-buffer - (and (eq 0 (apply #'git-call-process t args)) - (buffer-string)))) - -(defun git-call-process-string-display-error (&rest args) - "Wrapper for call-process that displays error message and returns -the process output as a string, or nil if the git command failed." - (with-temp-buffer - (if (eq 0 (apply #'git-call-process (list t t) args)) - (buffer-string) - (display-message-or-buffer (current-buffer)) - nil))) - -(defun git-run-process-region (buffer start end program args) - "Run a git process with a buffer region as input." - (let ((output-buffer (current-buffer)) - (dir default-directory)) - (with-current-buffer buffer - (cd dir) - (apply #'call-process-region start end program - nil (list output-buffer t) nil args)))) - -(defun git-run-command-buffer (buffer-name &rest args) - "Run a git command, sending the output to a buffer named BUFFER-NAME." - (let ((dir default-directory) - (buffer (get-buffer-create buffer-name))) - (message "Running git %s..." (car args)) - (with-current-buffer buffer - (let ((default-directory dir) - (buffer-read-only nil)) - (erase-buffer) - (apply #'git-call-process buffer args))) - (message "Running git %s...done" (car args)) - buffer)) - -(defun git-run-command-region (buffer start end env &rest args) - "Run a git command with specified buffer region as input." - (with-temp-buffer - (if (eq 0 (if env - (git-run-process-region - buffer start end "env" - (append (git-get-env-strings env) (list "git") args)) - (git-run-process-region buffer start end "git" args))) - (buffer-string) - (display-message-or-buffer (current-buffer)) - nil))) - -(defun git-run-hook (hook env &rest args) - "Run a git hook and display its output if any." - (let ((dir default-directory) - (hook-name (expand-file-name (concat ".git/hooks/" hook)))) - (or (not (file-executable-p hook-name)) - (let (status (buffer (get-buffer-create "*Git Hook Output*"))) - (with-current-buffer buffer - (erase-buffer) - (cd dir) - (setq status - (if env - (apply #'call-process "env" nil (list buffer t) nil - (append (git-get-env-strings env) (list hook-name) args)) - (apply #'call-process hook-name nil (list buffer t) nil args)))) - (display-message-or-buffer buffer) - (eq 0 status))))) - -(defun git-get-string-sha1 (string) - "Read a SHA1 from the specified string." - (and string - (string-match "[0-9a-f]\\{40\\}" string) - (match-string 0 string))) - -(defun git-get-committer-name () - "Return the name to use as GIT_COMMITTER_NAME." - ; copied from log-edit - (or git-committer-name - (git-config "user.name") - (and (boundp 'add-log-full-name) add-log-full-name) - (and (fboundp 'user-full-name) (user-full-name)) - (and (boundp 'user-full-name) user-full-name))) - -(defun git-get-committer-email () - "Return the email address to use as GIT_COMMITTER_EMAIL." - ; copied from log-edit - (or git-committer-email - (git-config "user.email") - (and (boundp 'add-log-mailing-address) add-log-mailing-address) - (and (fboundp 'user-mail-address) (user-mail-address)) - (and (boundp 'user-mail-address) user-mail-address))) - -(defun git-get-commits-coding-system () - "Return the coding system to use for commits." - (let ((repo-config (git-config "i18n.commitencoding"))) - (or git-commits-coding-system - (and repo-config - (fboundp 'locale-charset-to-coding-system) - (locale-charset-to-coding-system repo-config)) - 'utf-8))) - -(defun git-get-logoutput-coding-system () - "Return the coding system used for git-log output." - (let ((repo-config (or (git-config "i18n.logoutputencoding") - (git-config "i18n.commitencoding")))) - (or git-commits-coding-system - (and repo-config - (fboundp 'locale-charset-to-coding-system) - (locale-charset-to-coding-system repo-config)) - 'utf-8))) - -(defun git-escape-file-name (name) - "Escape a file name if necessary." - (if (string-match "[\n\t\"\\]" name) - (concat "\"" - (mapconcat (lambda (c) - (case c - (?\n "\\n") - (?\t "\\t") - (?\\ "\\\\") - (?\" "\\\"") - (t (char-to-string c)))) - name "") - "\"") - name)) - -(defun git-success-message (text files) - "Print a success message after having handled FILES." - (let ((n (length files))) - (if (equal n 1) - (message "%s %s" text (car files)) - (message "%s %d files" text n)))) - -(defun git-get-top-dir (dir) - "Retrieve the top-level directory of a git tree." - (let ((cdup (with-output-to-string - (with-current-buffer standard-output - (cd dir) - (unless (eq 0 (git-call-process t "rev-parse" "--show-cdup")) - (error "cannot find top-level git tree for %s." dir)))))) - (expand-file-name (concat (file-name-as-directory dir) - (car (split-string cdup "\n")))))) - -;stolen from pcl-cvs -(defun git-append-to-ignore (file) - "Add a file name to the ignore file in its directory." - (let* ((fullname (expand-file-name file)) - (dir (file-name-directory fullname)) - (name (file-name-nondirectory fullname)) - (ignore-name (expand-file-name git-per-dir-ignore-file dir)) - (created (not (file-exists-p ignore-name)))) - (save-window-excursion - (set-buffer (find-file-noselect ignore-name)) - (goto-char (point-max)) - (unless (zerop (current-column)) (insert "\n")) - (insert "/" name "\n") - (sort-lines nil (point-min) (point-max)) - (save-buffer)) - (when created - (git-call-process nil "update-index" "--add" "--" (file-relative-name ignore-name))) - (git-update-status-files (list (file-relative-name ignore-name))))) - -; propertize definition for XEmacs, stolen from erc-compat -(eval-when-compile - (unless (fboundp 'propertize) - (defun propertize (string &rest props) - (let ((string (copy-sequence string))) - (while props - (put-text-property 0 (length string) (nth 0 props) (nth 1 props) string) - (setq props (cddr props))) - string)))) - -;;;; Wrappers for basic git commands -;;;; ------------------------------------------------------------ - -(defun git-rev-parse (rev) - "Parse a revision name and return its SHA1." - (git-get-string-sha1 - (git-call-process-string "rev-parse" rev))) - -(defun git-config (key) - "Retrieve the value associated to KEY in the git repository config file." - (let ((str (git-call-process-string "config" key))) - (and str (car (split-string str "\n"))))) - -(defun git-symbolic-ref (ref) - "Wrapper for the git-symbolic-ref command." - (let ((str (git-call-process-string "symbolic-ref" ref))) - (and str (car (split-string str "\n"))))) - -(defun git-update-ref (ref newval &optional oldval reason) - "Update a reference by calling git-update-ref." - (let ((args (and oldval (list oldval)))) - (when newval (push newval args)) - (push ref args) - (when reason - (push reason args) - (push "-m" args)) - (unless newval (push "-d" args)) - (apply 'git-call-process-display-error "update-ref" args))) - -(defun git-for-each-ref (&rest specs) - "Return a list of refs using git-for-each-ref. -Each entry is a cons of (SHORT-NAME . FULL-NAME)." - (let (refs) - (with-temp-buffer - (apply #'git-call-process t "for-each-ref" "--format=%(refname)" specs) - (goto-char (point-min)) - (while (re-search-forward "^[^/\n]+/[^/\n]+/\\(.+\\)$" nil t) - (push (cons (match-string 1) (match-string 0)) refs))) - (nreverse refs))) - -(defun git-read-tree (tree &optional index-file) - "Read a tree into the index file." - (let ((process-environment - (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) process-environment))) - (apply 'git-call-process-display-error "read-tree" (if tree (list tree))))) - -(defun git-write-tree (&optional index-file) - "Call git-write-tree and return the resulting tree SHA1 as a string." - (let ((process-environment - (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) process-environment))) - (git-get-string-sha1 - (git-call-process-string-display-error "write-tree")))) - -(defun git-commit-tree (buffer tree parent) - "Create a commit and possibly update HEAD. -Create a commit with the message in BUFFER using the tree with hash TREE. -Use PARENT as the parent of the new commit. If PARENT is the current \"HEAD\", -update the \"HEAD\" reference to the new commit." - (let ((author-name (git-get-committer-name)) - (author-email (git-get-committer-email)) - (subject "commit (initial): ") - author-date log-start log-end args coding-system-for-write) - (when parent - (setq subject "commit: ") - (push "-p" args) - (push parent args)) - (with-current-buffer buffer - (goto-char (point-min)) - (if - (setq log-start (re-search-forward (concat "^" (regexp-quote git-log-msg-separator) "\n") nil t)) - (save-restriction - (narrow-to-region (point-min) log-start) - (goto-char (point-min)) - (when (re-search-forward "^Author: +\\(.*?\\) *<\\(.*\\)> *$" nil t) - (setq author-name (match-string 1) - author-email (match-string 2))) - (goto-char (point-min)) - (when (re-search-forward "^Date: +\\(.*\\)$" nil t) - (setq author-date (match-string 1))) - (goto-char (point-min)) - (when (re-search-forward "^Merge: +\\(.*\\)" nil t) - (setq subject "commit (merge): ") - (dolist (parent (split-string (match-string 1) " +" t)) - (push "-p" args) - (push parent args)))) - (setq log-start (point-min))) - (setq log-end (point-max)) - (goto-char log-start) - (when (re-search-forward ".*$" nil t) - (setq subject (concat subject (match-string 0)))) - (setq coding-system-for-write buffer-file-coding-system)) - (let ((commit - (git-get-string-sha1 - (let ((env `(("GIT_AUTHOR_NAME" . ,author-name) - ("GIT_AUTHOR_EMAIL" . ,author-email) - ("GIT_COMMITTER_NAME" . ,(git-get-committer-name)) - ("GIT_COMMITTER_EMAIL" . ,(git-get-committer-email))))) - (when author-date (push `("GIT_AUTHOR_DATE" . ,author-date) env)) - (apply #'git-run-command-region - buffer log-start log-end env - "commit-tree" tree (nreverse args)))))) - (when commit (git-update-ref "HEAD" commit parent subject)) - commit))) - -(defun git-empty-db-p () - "Check if the git db is empty (no commit done yet)." - (not (eq 0 (git-call-process nil "rev-parse" "--verify" "HEAD")))) - -(defun git-get-merge-heads () - "Retrieve the merge heads from the MERGE_HEAD file if present." - (let (heads) - (when (file-readable-p ".git/MERGE_HEAD") - (with-temp-buffer - (insert-file-contents ".git/MERGE_HEAD" nil nil nil t) - (goto-char (point-min)) - (while (re-search-forward "[0-9a-f]\\{40\\}" nil t) - (push (match-string 0) heads)))) - (nreverse heads))) - -(defun git-get-commit-description (commit) - "Get a one-line description of COMMIT." - (let ((coding-system-for-read (git-get-logoutput-coding-system))) - (let ((descr (git-call-process-string "log" "--max-count=1" "--pretty=oneline" commit))) - (if (and descr (string-match "\\`\\([0-9a-f]\\{40\\}\\) *\\(.*\\)$" descr)) - (concat (substring (match-string 1 descr) 0 10) " - " (match-string 2 descr)) - descr)))) - -;;;; File info structure -;;;; ------------------------------------------------------------ - -; fileinfo structure stolen from pcl-cvs -(defstruct (git-fileinfo - (:copier nil) - (:constructor git-create-fileinfo (state name &optional old-perm new-perm rename-state orig-name marked)) - (:conc-name git-fileinfo->)) - marked ;; t/nil - state ;; current state - name ;; file name - old-perm new-perm ;; permission flags - rename-state ;; rename or copy state - orig-name ;; original name for renames or copies - needs-update ;; whether file needs to be updated - needs-refresh) ;; whether file needs to be refreshed - -(defvar git-status nil) - -(defun git-set-fileinfo-state (info state) - "Set the state of a file info." - (unless (eq (git-fileinfo->state info) state) - (setf (git-fileinfo->state info) state - (git-fileinfo->new-perm info) (git-fileinfo->old-perm info) - (git-fileinfo->rename-state info) nil - (git-fileinfo->orig-name info) nil - (git-fileinfo->needs-update info) nil - (git-fileinfo->needs-refresh info) t))) - -(defun git-status-filenames-map (status func files &rest args) - "Apply FUNC to the status files names in the FILES list. -The list must be sorted." - (when files - (let ((file (pop files)) - (node (ewoc-nth status 0))) - (while (and file node) - (let* ((info (ewoc-data node)) - (name (git-fileinfo->name info))) - (if (string-lessp name file) - (setq node (ewoc-next status node)) - (if (string-equal name file) - (apply func info args)) - (setq file (pop files)))))))) - -(defun git-set-filenames-state (status files state) - "Set the state of a list of named files. The list must be sorted" - (when files - (git-status-filenames-map status #'git-set-fileinfo-state files state) - (unless state ;; delete files whose state has been set to nil - (ewoc-filter status (lambda (info) (git-fileinfo->state info)))))) - -(defun git-state-code (code) - "Convert from a string to a added/deleted/modified state." - (case (string-to-char code) - (?M 'modified) - (?? 'unknown) - (?A 'added) - (?D 'deleted) - (?U 'unmerged) - (?T 'modified) - (t nil))) - -(defun git-status-code-as-string (code) - "Format a git status code as string." - (case code - ('modified (propertize "Modified" 'face 'git-status-face)) - ('unknown (propertize "Unknown " 'face 'git-unknown-face)) - ('added (propertize "Added " 'face 'git-status-face)) - ('deleted (propertize "Deleted " 'face 'git-status-face)) - ('unmerged (propertize "Unmerged" 'face 'git-unmerged-face)) - ('uptodate (propertize "Uptodate" 'face 'git-uptodate-face)) - ('ignored (propertize "Ignored " 'face 'git-ignored-face)) - (t "? "))) - -(defun git-file-type-as-string (old-perm new-perm) - "Return a string describing the file type based on its permissions." - (let* ((old-type (lsh (or old-perm 0) -9)) - (new-type (lsh (or new-perm 0) -9)) - (str (case new-type - (64 ;; file - (case old-type - (64 nil) - (80 " (type change symlink -> file)") - (112 " (type change subproject -> file)"))) - (80 ;; symlink - (case old-type - (64 " (type change file -> symlink)") - (112 " (type change subproject -> symlink)") - (t " (symlink)"))) - (112 ;; subproject - (case old-type - (64 " (type change file -> subproject)") - (80 " (type change symlink -> subproject)") - (t " (subproject)"))) - (72 nil) ;; directory (internal, not a real git state) - (0 ;; deleted or unknown - (case old-type - (80 " (symlink)") - (112 " (subproject)"))) - (t (format " (unknown type %o)" new-type))))) - (cond (str (propertize str 'face 'git-status-face)) - ((eq new-type 72) "/") - (t "")))) - -(defun git-rename-as-string (info) - "Return a string describing the copy or rename associated with INFO, or an empty string if none." - (let ((state (git-fileinfo->rename-state info))) - (if state - (propertize - (concat " (" - (if (eq state 'copy) "copied from " - (if (eq (git-fileinfo->state info) 'added) "renamed from " - "renamed to ")) - (git-escape-file-name (git-fileinfo->orig-name info)) - ")") 'face 'git-status-face) - ""))) - -(defun git-permissions-as-string (old-perm new-perm) - "Format a permission change as string." - (propertize - (if (or (not old-perm) - (not new-perm) - (eq 0 (logand ?\111 (logxor old-perm new-perm)))) - " " - (if (eq 0 (logand ?\111 old-perm)) "+x" "-x")) - 'face 'git-permission-face)) - -(defun git-fileinfo-prettyprint (info) - "Pretty-printer for the git-fileinfo structure." - (let ((old-perm (git-fileinfo->old-perm info)) - (new-perm (git-fileinfo->new-perm info))) - (insert (concat " " (if (git-fileinfo->marked info) (propertize "*" 'face 'git-mark-face) " ") - " " (git-status-code-as-string (git-fileinfo->state info)) - " " (git-permissions-as-string old-perm new-perm) - " " (git-escape-file-name (git-fileinfo->name info)) - (git-file-type-as-string old-perm new-perm) - (git-rename-as-string info))))) - -(defun git-update-node-fileinfo (node info) - "Update the fileinfo of the specified node. The names are assumed to match already." - (let ((data (ewoc-data node))) - (setf - ;; preserve the marked flag - (git-fileinfo->marked info) (git-fileinfo->marked data) - (git-fileinfo->needs-update data) nil) - (when (not (equal info data)) - (setf (git-fileinfo->needs-refresh info) t - (ewoc-data node) info)))) - -(defun git-insert-info-list (status infolist files) - "Insert a sorted list of file infos in the status buffer, replacing existing ones if any." - (let* ((info (pop infolist)) - (node (ewoc-nth status 0)) - (name (and info (git-fileinfo->name info))) - remaining) - (while info - (let ((nodename (and node (git-fileinfo->name (ewoc-data node))))) - (while (and files (string-lessp (car files) name)) - (push (pop files) remaining)) - (when (and files (string-equal (car files) name)) - (setq files (cdr files))) - (cond ((not nodename) - (setq node (ewoc-enter-last status info)) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info)))) - ((string-lessp nodename name) - (setq node (ewoc-next status node))) - ((string-equal nodename name) - ;; preserve the marked flag - (git-update-node-fileinfo node info) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info)))) - (t - (setq node (ewoc-enter-before status node info)) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info))))))) - (nconc (nreverse remaining) files))) - -(defun git-run-diff-index (status files) - "Run git-diff-index on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "diff-index" "-z" "-M" "HEAD" "--" files) - (goto-char (point-min)) - (while (re-search-forward - ":\\([0-7]\\{6\\}\\) \\([0-7]\\{6\\}\\) [0-9a-f]\\{40\\} [0-9a-f]\\{40\\} \\(\\([ADMUT]\\)\0\\([^\0]+\\)\\|\\([CR]\\)[0-9]*\0\\([^\0]+\\)\0\\([^\0]+\\)\\)\0" - nil t 1) - (let ((old-perm (string-to-number (match-string 1) 8)) - (new-perm (string-to-number (match-string 2) 8)) - (state (or (match-string 4) (match-string 6))) - (name (or (match-string 5) (match-string 7))) - (new-name (match-string 8))) - (if new-name ; copy or rename - (if (eq ?C (string-to-char state)) - (push (git-create-fileinfo 'added new-name old-perm new-perm 'copy name) infolist) - (push (git-create-fileinfo 'deleted name 0 0 'rename new-name) infolist) - (push (git-create-fileinfo 'added new-name old-perm new-perm 'rename name) infolist)) - (push (git-create-fileinfo (git-state-code state) name old-perm new-perm) infolist))))) - (setq infolist (sort (nreverse infolist) - (lambda (info1 info2) - (string-lessp (git-fileinfo->name info1) - (git-fileinfo->name info2))))) - (git-insert-info-list status infolist files))) - -(defun git-find-status-file (status file) - "Find a given file in the status ewoc and return its node." - (let ((node (ewoc-nth status 0))) - (while (and node (not (string= file (git-fileinfo->name (ewoc-data node))))) - (setq node (ewoc-next status node))) - node)) - -(defun git-run-ls-files (status files default-state &rest options) - "Run git-ls-files on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" (append options (list "--") files)) - (goto-char (point-min)) - (while (re-search-forward "\\([^\0]*?\\)\\(/?\\)\0" nil t 1) - (let ((name (match-string 1))) - (push (git-create-fileinfo default-state name 0 - (if (string-equal "/" (match-string 2)) (lsh ?\110 9) 0)) - infolist)))) - (setq infolist (nreverse infolist)) ;; assume it is sorted already - (git-insert-info-list status infolist files))) - -(defun git-run-ls-files-cached (status files default-state) - "Run git-ls-files -c on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" "-s" "-c" "--" files) - (goto-char (point-min)) - (while (re-search-forward "\\([0-7]\\{6\\}\\) [0-9a-f]\\{40\\} 0\t\\([^\0]+\\)\0" nil t) - (let* ((new-perm (string-to-number (match-string 1) 8)) - (old-perm (if (eq default-state 'added) 0 new-perm)) - (name (match-string 2))) - (push (git-create-fileinfo default-state name old-perm new-perm) infolist)))) - (setq infolist (nreverse infolist)) ;; assume it is sorted already - (git-insert-info-list status infolist files))) - -(defun git-run-ls-unmerged (status files) - "Run git-ls-files -u on FILES and parse the results into STATUS." - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" "-u" "--" files) - (goto-char (point-min)) - (let (unmerged-files) - (while (re-search-forward "[0-7]\\{6\\} [0-9a-f]\\{40\\} [123]\t\\([^\0]+\\)\0" nil t) - (push (match-string 1) unmerged-files)) - (setq unmerged-files (nreverse unmerged-files)) ;; assume it is sorted already - (git-set-filenames-state status unmerged-files 'unmerged)))) - -(defun git-get-exclude-files () - "Get the list of exclude files to pass to git-ls-files." - (let (files - (config (git-config "core.excludesfile"))) - (when (file-readable-p ".git/info/exclude") - (push ".git/info/exclude" files)) - (when (and config (file-readable-p config)) - (push config files)) - files)) - -(defun git-run-ls-files-with-excludes (status files default-state &rest options) - "Run git-ls-files on FILES with appropriate --exclude-from options." - (let ((exclude-files (git-get-exclude-files))) - (apply #'git-run-ls-files status files default-state "--directory" "--no-empty-directory" - (concat "--exclude-per-directory=" git-per-dir-ignore-file) - (append options (mapcar (lambda (f) (concat "--exclude-from=" f)) exclude-files))))) - -(defun git-update-status-files (&optional files mark-files) - "Update the status of FILES from the index. -The FILES list must be sorted." - (unless git-status (error "Not in git-status buffer.")) - ;; set the needs-update flag on existing files - (if files - (git-status-filenames-map - git-status (lambda (info) (setf (git-fileinfo->needs-update info) t)) files) - (ewoc-map (lambda (info) (setf (git-fileinfo->needs-update info) t) nil) git-status) - (git-call-process nil "update-index" "--refresh") - (when git-show-uptodate - (git-run-ls-files-cached git-status nil 'uptodate))) - (let ((remaining-files - (if (git-empty-db-p) ; we need some special handling for an empty db - (git-run-ls-files-cached git-status files 'added) - (git-run-diff-index git-status files)))) - (git-run-ls-unmerged git-status files) - (when (or remaining-files (and git-show-unknown (not files))) - (setq remaining-files (git-run-ls-files-with-excludes git-status remaining-files 'unknown "-o"))) - (when (or remaining-files (and git-show-ignored (not files))) - (setq remaining-files (git-run-ls-files-with-excludes git-status remaining-files 'ignored "-o" "-i"))) - (unless files - (setq remaining-files (git-get-filenames (ewoc-collect git-status #'git-fileinfo->needs-update)))) - (when remaining-files - (setq remaining-files (git-run-ls-files-cached git-status remaining-files 'uptodate))) - (git-set-filenames-state git-status remaining-files nil) - (when mark-files (git-mark-files git-status files)) - (git-refresh-files) - (git-refresh-ewoc-hf git-status))) - -(defun git-mark-files (status files) - "Mark all the specified FILES, and unmark the others." - (let ((file (and files (pop files))) - (node (ewoc-nth status 0))) - (while node - (let ((info (ewoc-data node))) - (if (and file (string-equal (git-fileinfo->name info) file)) - (progn - (unless (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) t) - (setf (git-fileinfo->needs-refresh info) t)) - (setq file (pop files)) - (setq node (ewoc-next status node))) - (when (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) nil) - (setf (git-fileinfo->needs-refresh info) t)) - (if (and file (string-lessp file (git-fileinfo->name info))) - (setq file (pop files)) - (setq node (ewoc-next status node)))))))) - -(defun git-marked-files () - "Return a list of all marked files, or if none a list containing just the file at cursor position." - (unless git-status (error "Not in git-status buffer.")) - (or (ewoc-collect git-status (lambda (info) (git-fileinfo->marked info))) - (list (ewoc-data (ewoc-locate git-status))))) - -(defun git-marked-files-state (&rest states) - "Return a sorted list of marked files that are in the specified states." - (let ((files (git-marked-files)) - result) - (dolist (info files) - (when (memq (git-fileinfo->state info) states) - (push info result))) - (nreverse result))) - -(defun git-refresh-files () - "Refresh all files that need it and clear the needs-refresh flag." - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map - (lambda (info) - (let ((refresh (git-fileinfo->needs-refresh info))) - (setf (git-fileinfo->needs-refresh info) nil) - refresh)) - git-status) - ; move back to goal column - (when goal-column (move-to-column goal-column))) - -(defun git-refresh-ewoc-hf (status) - "Refresh the ewoc header and footer." - (let ((branch (git-symbolic-ref "HEAD")) - (head (if (git-empty-db-p) "Nothing committed yet" - (git-get-commit-description "HEAD"))) - (merge-heads (git-get-merge-heads))) - (ewoc-set-hf status - (format "Directory: %s\nBranch: %s\nHead: %s%s\n" - default-directory - (if branch - (if (string-match "^refs/heads/" branch) - (substring branch (match-end 0)) - branch) - "none (detached HEAD)") - head - (if merge-heads - (concat "\nMerging: " - (mapconcat (lambda (str) (git-get-commit-description str)) merge-heads "\n ")) - "")) - (if (ewoc-nth status 0) "" " No changes.")))) - -(defun git-get-filenames (files) - (mapcar (lambda (info) (git-fileinfo->name info)) files)) - -(defun git-update-index (index-file files) - "Run git-update-index on a list of files." - (let ((process-environment (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) - process-environment)) - added deleted modified) - (dolist (info files) - (case (git-fileinfo->state info) - ('added (push info added)) - ('deleted (push info deleted)) - ('modified (push info modified)))) - (and - (or (not added) (apply #'git-call-process-display-error "update-index" "--add" "--" (git-get-filenames added))) - (or (not deleted) (apply #'git-call-process-display-error "update-index" "--remove" "--" (git-get-filenames deleted))) - (or (not modified) (apply #'git-call-process-display-error "update-index" "--" (git-get-filenames modified)))))) - -(defun git-run-pre-commit-hook () - "Run the pre-commit hook if any." - (unless git-status (error "Not in git-status buffer.")) - (let ((files (git-marked-files-state 'added 'deleted 'modified))) - (or (not files) - (not (file-executable-p ".git/hooks/pre-commit")) - (let ((index-file (make-temp-file "gitidx"))) - (unwind-protect - (let ((head-tree (unless (git-empty-db-p) (git-rev-parse "HEAD^{tree}")))) - (git-read-tree head-tree index-file) - (git-update-index index-file files) - (git-run-hook "pre-commit" `(("GIT_INDEX_FILE" . ,index-file)))) - (delete-file index-file)))))) - -(defun git-do-commit () - "Perform the actual commit using the current buffer as log message." - (interactive) - (let ((buffer (current-buffer)) - (index-file (make-temp-file "gitidx"))) - (with-current-buffer log-edit-parent-buffer - (if (git-marked-files-state 'unmerged) - (message "You cannot commit unmerged files, resolve them first.") - (unwind-protect - (let ((files (git-marked-files-state 'added 'deleted 'modified)) - head tree head-tree) - (unless (git-empty-db-p) - (setq head (git-rev-parse "HEAD") - head-tree (git-rev-parse "HEAD^{tree}"))) - (message "Running git commit...") - (when - (and - (git-read-tree head-tree index-file) - (git-update-index nil files) ;update both the default index - (git-update-index index-file files) ;and the temporary one - (setq tree (git-write-tree index-file))) - (if (or (not (string-equal tree head-tree)) - (yes-or-no-p "The tree was not modified, do you really want to perform an empty commit? ")) - (let ((commit (git-commit-tree buffer tree head))) - (when commit - (condition-case nil (delete-file ".git/MERGE_HEAD") (error nil)) - (condition-case nil (delete-file ".git/MERGE_MSG") (error nil)) - (with-current-buffer buffer (erase-buffer)) - (git-update-status-files (git-get-filenames files)) - (git-call-process nil "rerere") - (git-call-process nil "gc" "--auto") - (message "Committed %s." commit) - (git-run-hook "post-commit" nil))) - (message "Commit aborted.")))) - (delete-file index-file)))))) - - -;;;; Interactive functions -;;;; ------------------------------------------------------------ - -(defun git-mark-file () - "Mark the file that the cursor is on and move to the next one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) t) - (ewoc-invalidate git-status pos) - (ewoc-goto-next git-status 1))) - -(defun git-unmark-file () - "Unmark the file that the cursor is on and move to the next one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) nil) - (ewoc-invalidate git-status pos) - (ewoc-goto-next git-status 1))) - -(defun git-unmark-file-up () - "Unmark the file that the cursor is on and move to the previous one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) nil) - (ewoc-invalidate git-status pos) - (ewoc-goto-prev git-status 1))) - -(defun git-mark-all () - "Mark all files." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (unless (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) t))) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-unmark-all () - "Unmark all files." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (when (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) nil) - t)) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-toggle-all-marks () - "Toggle all file marks." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (setf (git-fileinfo->marked info) (not (git-fileinfo->marked info))) t) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-next-file (&optional n) - "Move the selection down N files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (ewoc-goto-next git-status n)) - -(defun git-prev-file (&optional n) - "Move the selection up N files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (ewoc-goto-prev git-status n)) - -(defun git-next-unmerged-file (&optional n) - "Move the selection down N unmerged files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (let* ((last (ewoc-locate git-status)) - (node (ewoc-next git-status last))) - (while (and node (> n 0)) - (when (eq 'unmerged (git-fileinfo->state (ewoc-data node))) - (setq n (1- n)) - (setq last node)) - (setq node (ewoc-next git-status node))) - (ewoc-goto-node git-status last))) - -(defun git-prev-unmerged-file (&optional n) - "Move the selection up N unmerged files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (let* ((last (ewoc-locate git-status)) - (node (ewoc-prev git-status last))) - (while (and node (> n 0)) - (when (eq 'unmerged (git-fileinfo->state (ewoc-data node))) - (setq n (1- n)) - (setq last node)) - (setq node (ewoc-prev git-status node))) - (ewoc-goto-node git-status last))) - -(defun git-insert-file (file) - "Insert file(s) into the git-status buffer." - (interactive "fInsert file: ") - (git-update-status-files (list (file-relative-name file)))) - -(defun git-add-file () - "Add marked file(s) to the index cache." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'unknown 'ignored 'unmerged)))) - ;; FIXME: add support for directories - (unless files - (push (file-relative-name (read-file-name "File to add: " nil nil t)) files)) - (when (apply 'git-call-process-display-error "update-index" "--add" "--" files) - (git-update-status-files files) - (git-success-message "Added" files)))) - -(defun git-ignore-file () - "Add marked file(s) to the ignore list." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'unknown)))) - (unless files - (push (file-relative-name (read-file-name "File to ignore: " nil nil t)) files)) - (dolist (f files) (git-append-to-ignore f)) - (git-update-status-files files) - (git-success-message "Ignored" files))) - -(defun git-remove-file () - "Remove the marked file(s)." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'added 'modified 'unknown 'uptodate 'ignored)))) - (unless files - (push (file-relative-name (read-file-name "File to remove: " nil nil t)) files)) - (if (yes-or-no-p - (if (cdr files) - (format "Remove %d files? " (length files)) - (format "Remove %s? " (car files)))) - (progn - (dolist (name files) - (ignore-errors - (if (file-directory-p name) - (delete-directory name) - (delete-file name)))) - (when (apply 'git-call-process-display-error "update-index" "--remove" "--" files) - (git-update-status-files files) - (git-success-message "Removed" files))) - (message "Aborting")))) - -(defun git-revert-file () - "Revert changes to the marked file(s)." - (interactive) - (let ((files (git-marked-files-state 'added 'deleted 'modified 'unmerged)) - added modified) - (when (and files - (yes-or-no-p - (if (cdr files) - (format "Revert %d files? " (length files)) - (format "Revert %s? " (git-fileinfo->name (car files)))))) - (dolist (info files) - (case (git-fileinfo->state info) - ('added (push (git-fileinfo->name info) added)) - ('deleted (push (git-fileinfo->name info) modified)) - ('unmerged (push (git-fileinfo->name info) modified)) - ('modified (push (git-fileinfo->name info) modified)))) - ;; check if a buffer contains one of the files and isn't saved - (dolist (file modified) - (let ((buffer (get-file-buffer file))) - (when (and buffer (buffer-modified-p buffer)) - (error "Buffer %s is modified. Please kill or save modified buffers before reverting." (buffer-name buffer))))) - (let ((ok (and - (or (not added) - (apply 'git-call-process-display-error "update-index" "--force-remove" "--" added)) - (or (not modified) - (apply 'git-call-process-display-error "checkout" "HEAD" modified)))) - (names (git-get-filenames files))) - (git-update-status-files names) - (when ok - (dolist (file modified) - (let ((buffer (get-file-buffer file))) - (when buffer (with-current-buffer buffer (revert-buffer t t t))))) - (git-success-message "Reverted" names)))))) - -(defun git-remove-handled () - "Remove handled files from the status list." - (interactive) - (ewoc-filter git-status - (lambda (info) - (case (git-fileinfo->state info) - ('ignored git-show-ignored) - ('uptodate git-show-uptodate) - ('unknown git-show-unknown) - (t t)))) - (unless (ewoc-nth git-status 0) ; refresh header if list is empty - (git-refresh-ewoc-hf git-status))) - -(defun git-toggle-show-uptodate () - "Toogle the option for showing up-to-date files." - (interactive) - (if (setq git-show-uptodate (not git-show-uptodate)) - (git-refresh-status) - (git-remove-handled))) - -(defun git-toggle-show-ignored () - "Toogle the option for showing ignored files." - (interactive) - (if (setq git-show-ignored (not git-show-ignored)) - (progn - (message "Inserting ignored files...") - (git-run-ls-files-with-excludes git-status nil 'ignored "-o" "-i") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - (message "Inserting ignored files...done")) - (git-remove-handled))) - -(defun git-toggle-show-unknown () - "Toogle the option for showing unknown files." - (interactive) - (if (setq git-show-unknown (not git-show-unknown)) - (progn - (message "Inserting unknown files...") - (git-run-ls-files-with-excludes git-status nil 'unknown "-o") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - (message "Inserting unknown files...done")) - (git-remove-handled))) - -(defun git-expand-directory (info) - "Expand the directory represented by INFO to list its files." - (when (eq (lsh (git-fileinfo->new-perm info) -9) ?\110) - (let ((dir (git-fileinfo->name info))) - (git-set-filenames-state git-status (list dir) nil) - (git-run-ls-files-with-excludes git-status (list (concat dir "/")) 'unknown "-o") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - t))) - -(defun git-setup-diff-buffer (buffer) - "Setup a buffer for displaying a diff." - (let ((dir default-directory)) - (with-current-buffer buffer - (diff-mode) - (goto-char (point-min)) - (setq default-directory dir) - (setq buffer-read-only t))) - (display-buffer buffer) - ; shrink window only if it displays the status buffer - (when (eq (window-buffer) (current-buffer)) - (shrink-window-if-larger-than-buffer))) - -(defun git-diff-file () - "Diff the marked file(s) against HEAD." - (interactive) - (let ((files (git-marked-files))) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-index" "-p" "-M" "HEAD" "--" (git-get-filenames files))))) - -(defun git-diff-file-merge-head (arg) - "Diff the marked file(s) against the first merge head (or the nth one with a numeric prefix)." - (interactive "p") - (let ((files (git-marked-files)) - (merge-heads (git-get-merge-heads))) - (unless merge-heads (error "No merge in progress")) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-index" "-p" "-M" - (or (nth (1- arg) merge-heads) "HEAD") "--" (git-get-filenames files))))) - -(defun git-diff-unmerged-file (stage) - "Diff the marked unmerged file(s) against the specified stage." - (let ((files (git-marked-files))) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-files" "-p" stage "--" (git-get-filenames files))))) - -(defun git-diff-file-base () - "Diff the marked unmerged file(s) against the common base file." - (interactive) - (git-diff-unmerged-file "-1")) - -(defun git-diff-file-mine () - "Diff the marked unmerged file(s) against my pre-merge version." - (interactive) - (git-diff-unmerged-file "-2")) - -(defun git-diff-file-other () - "Diff the marked unmerged file(s) against the other's pre-merge version." - (interactive) - (git-diff-unmerged-file "-3")) - -(defun git-diff-file-combined () - "Do a combined diff of the marked unmerged file(s)." - (interactive) - (git-diff-unmerged-file "-c")) - -(defun git-diff-file-idiff () - "Perform an interactive diff on the current file." - (interactive) - (let ((files (git-marked-files-state 'added 'deleted 'modified))) - (unless (eq 1 (length files)) - (error "Cannot perform an interactive diff on multiple files.")) - (let* ((filename (car (git-get-filenames files))) - (buff1 (find-file-noselect filename)) - (buff2 (git-run-command-buffer (concat filename ".~HEAD~") "cat-file" "blob" (concat "HEAD:" filename)))) - (ediff-buffers buff1 buff2)))) - -(defun git-log-file () - "Display a log of changes to the marked file(s)." - (interactive) - (let* ((files (git-marked-files)) - (coding-system-for-read git-commits-coding-system) - (buffer (apply #'git-run-command-buffer "*git-log*" "rev-list" "--pretty" "HEAD" "--" (git-get-filenames files)))) - (with-current-buffer buffer - ; (git-log-mode) FIXME: implement log mode - (goto-char (point-min)) - (setq buffer-read-only t)) - (display-buffer buffer))) - -(defun git-log-edit-files () - "Return a list of marked files for use in the log-edit buffer." - (with-current-buffer log-edit-parent-buffer - (git-get-filenames (git-marked-files-state 'added 'deleted 'modified)))) - -(defun git-log-edit-diff () - "Run a diff of the current files being committed from a log-edit buffer." - (with-current-buffer log-edit-parent-buffer - (git-diff-file))) - -(defun git-append-sign-off (name email) - "Append a Signed-off-by entry to the current buffer, avoiding duplicates." - (let ((sign-off (format "Signed-off-by: %s <%s>" name email)) - (case-fold-search t)) - (goto-char (point-min)) - (unless (re-search-forward (concat "^" (regexp-quote sign-off)) nil t) - (goto-char (point-min)) - (unless (re-search-forward "^Signed-off-by: " nil t) - (setq sign-off (concat "\n" sign-off))) - (goto-char (point-max)) - (insert sign-off "\n")))) - -(defun git-setup-log-buffer (buffer &optional merge-heads author-name author-email subject date msg) - "Setup the log buffer for a commit." - (unless git-status (error "Not in git-status buffer.")) - (let ((dir default-directory) - (committer-name (git-get-committer-name)) - (committer-email (git-get-committer-email)) - (sign-off git-append-signed-off-by)) - (with-current-buffer buffer - (cd dir) - (erase-buffer) - (insert - (propertize - (format "Author: %s <%s>\n%s%s" - (or author-name committer-name) - (or author-email committer-email) - (if date (format "Date: %s\n" date) "") - (if merge-heads - (format "Merge: %s\n" - (mapconcat 'identity merge-heads " ")) - "")) - 'face 'git-header-face) - (propertize git-log-msg-separator 'face 'git-separator-face) - "\n") - (when subject (insert subject "\n\n")) - (cond (msg (insert msg "\n")) - ((file-readable-p ".git/rebase-apply/msg") - (insert-file-contents ".git/rebase-apply/msg")) - ((file-readable-p ".git/MERGE_MSG") - (insert-file-contents ".git/MERGE_MSG"))) - ; delete empty lines at end - (goto-char (point-min)) - (when (re-search-forward "\n+\\'" nil t) - (replace-match "\n" t t)) - (when sign-off (git-append-sign-off committer-name committer-email))) - buffer)) - -(define-derived-mode git-log-edit-mode log-edit-mode "Git-Log-Edit" - "Major mode for editing git log messages. - -Set up git-specific `font-lock-keywords' for `log-edit-mode'." - (set (make-local-variable 'font-lock-defaults) - '(git-log-edit-font-lock-keywords t t))) - -(defun git-commit-file () - "Commit the marked file(s), asking for a commit message." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (when (git-run-pre-commit-hook) - (let ((buffer (get-buffer-create "*git-commit*")) - (coding-system (git-get-commits-coding-system)) - author-name author-email subject date) - (when (eq 0 (buffer-size buffer)) - (when (file-readable-p ".git/rebase-apply/info") - (with-temp-buffer - (insert-file-contents ".git/rebase-apply/info") - (goto-char (point-min)) - (when (re-search-forward "^Author: \\(.*\\)\nEmail: \\(.*\\)$" nil t) - (setq author-name (match-string 1)) - (setq author-email (match-string 2))) - (goto-char (point-min)) - (when (re-search-forward "^Subject: \\(.*\\)$" nil t) - (setq subject (match-string 1))) - (goto-char (point-min)) - (when (re-search-forward "^Date: \\(.*\\)$" nil t) - (setq date (match-string 1))))) - (git-setup-log-buffer buffer (git-get-merge-heads) author-name author-email subject date)) - (if (boundp 'log-edit-diff-function) - (log-edit 'git-do-commit nil '((log-edit-listfun . git-log-edit-files) - (log-edit-diff-function . git-log-edit-diff)) buffer 'git-log-edit-mode) - (log-edit 'git-do-commit nil 'git-log-edit-files buffer - 'git-log-edit-mode)) - (setq paragraph-separate (concat (regexp-quote git-log-msg-separator) "$\\|Author: \\|Date: \\|Merge: \\|Signed-off-by: \\|\f\\|[ ]*$")) - (setq buffer-file-coding-system coding-system) - (re-search-forward (regexp-quote (concat git-log-msg-separator "\n")) nil t)))) - -(defun git-setup-commit-buffer (commit) - "Setup the commit buffer with the contents of COMMIT." - (let (parents author-name author-email subject date msg) - (with-temp-buffer - (let ((coding-system (git-get-logoutput-coding-system))) - (git-call-process t "log" "-1" "--pretty=medium" "--abbrev=40" commit) - (goto-char (point-min)) - (when (re-search-forward "^Merge: *\\(.*\\)$" nil t) - (setq parents (cdr (split-string (match-string 1) " +")))) - (when (re-search-forward "^Author: *\\(.*\\) <\\(.*\\)>$" nil t) - (setq author-name (match-string 1)) - (setq author-email (match-string 2))) - (when (re-search-forward "^Date: *\\(.*\\)$" nil t) - (setq date (match-string 1))) - (while (re-search-forward "^ \\(.*\\)$" nil t) - (push (match-string 1) msg)) - (setq msg (nreverse msg)) - (setq subject (pop msg)) - (while (and msg (zerop (length (car msg))) (pop msg))))) - (git-setup-log-buffer (get-buffer-create "*git-commit*") - parents author-name author-email subject date - (mapconcat #'identity msg "\n")))) - -(defun git-get-commit-files (commit) - "Retrieve a sorted list of files modified by COMMIT." - (let (files) - (with-temp-buffer - (git-call-process t "diff-tree" "-m" "-r" "-z" "--name-only" "--no-commit-id" "--root" commit) - (goto-char (point-min)) - (while (re-search-forward "\\([^\0]*\\)\0" nil t 1) - (push (match-string 1) files))) - (sort files #'string-lessp))) - -(defun git-read-commit-name (prompt &optional default) - "Ask for a commit name, with completion for local branch, remote branch and tag." - (completing-read prompt - (list* "HEAD" "ORIG_HEAD" "FETCH_HEAD" (mapcar #'car (git-for-each-ref))) - nil nil nil nil default)) - -(defun git-checkout (branch &optional merge) - "Checkout a branch, tag, or any commit. -Use a prefix arg if git should merge while checking out." - (interactive - (list (git-read-commit-name "Checkout: ") - current-prefix-arg)) - (unless git-status (error "Not in git-status buffer.")) - (let ((args (list branch "--"))) - (when merge (push "-m" args)) - (when (apply #'git-call-process-display-error "checkout" args) - (git-update-status-files)))) - -(defun git-branch (branch) - "Create a branch from the current HEAD and switch to it." - (interactive (list (git-read-commit-name "Branch: "))) - (unless git-status (error "Not in git-status buffer.")) - (if (git-rev-parse (concat "refs/heads/" branch)) - (if (yes-or-no-p (format "Branch %s already exists, replace it? " branch)) - (and (git-call-process-display-error "branch" "-f" branch) - (git-call-process-display-error "checkout" branch)) - (message "Canceled.")) - (git-call-process-display-error "checkout" "-b" branch)) - (git-refresh-ewoc-hf git-status)) - -(defun git-amend-commit () - "Undo the last commit on HEAD, and set things up to commit an -amended version of it." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (when (git-empty-db-p) (error "No commit to amend.")) - (let* ((commit (git-rev-parse "HEAD")) - (files (git-get-commit-files commit))) - (when (if (git-rev-parse "HEAD^") - (git-call-process-display-error "reset" "--soft" "HEAD^") - (and (git-update-ref "ORIG_HEAD" commit) - (git-update-ref "HEAD" nil commit))) - (git-update-status-files files t) - (git-setup-commit-buffer commit) - (git-commit-file)))) - -(defun git-cherry-pick-commit (arg) - "Cherry-pick a commit." - (interactive (list (git-read-commit-name "Cherry-pick commit: "))) - (unless git-status (error "Not in git-status buffer.")) - (let ((commit (git-rev-parse (concat arg "^0")))) - (unless commit (error "Not a valid commit '%s'." arg)) - (when (git-rev-parse (concat commit "^2")) - (error "Cannot cherry-pick a merge commit.")) - (let ((files (git-get-commit-files commit)) - (ok (git-call-process-display-error "cherry-pick" "-n" commit))) - (git-update-status-files files ok) - (with-current-buffer (git-setup-commit-buffer commit) - (goto-char (point-min)) - (if (re-search-forward "^\n*Signed-off-by:" nil t 1) - (goto-char (match-beginning 0)) - (goto-char (point-max))) - (insert "(cherry picked from commit " commit ")\n")) - (when ok (git-commit-file))))) - -(defun git-revert-commit (arg) - "Revert a commit." - (interactive (list (git-read-commit-name "Revert commit: "))) - (unless git-status (error "Not in git-status buffer.")) - (let ((commit (git-rev-parse (concat arg "^0")))) - (unless commit (error "Not a valid commit '%s'." arg)) - (when (git-rev-parse (concat commit "^2")) - (error "Cannot revert a merge commit.")) - (let ((files (git-get-commit-files commit)) - (subject (git-get-commit-description commit)) - (ok (git-call-process-display-error "revert" "-n" commit))) - (git-update-status-files files ok) - (when (string-match "^[0-9a-f]+ - \\(.*\\)$" subject) - (setq subject (match-string 1 subject))) - (git-setup-log-buffer (get-buffer-create "*git-commit*") - (git-get-merge-heads) nil nil (format "Revert \"%s\"" subject) nil - (format "This reverts commit %s.\n" commit)) - (when ok (git-commit-file))))) - -(defun git-find-file () - "Visit the current file in its own buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (unless (git-expand-directory info) - (find-file (git-fileinfo->name info)) - (when (eq 'unmerged (git-fileinfo->state info)) - (smerge-mode 1))))) - -(defun git-find-file-other-window () - "Visit the current file in its own buffer in another window." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (find-file-other-window (git-fileinfo->name info)) - (when (eq 'unmerged (git-fileinfo->state info)) - (smerge-mode)))) - -(defun git-find-file-imerge () - "Visit the current file in interactive merge mode." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (find-file (git-fileinfo->name info)) - (smerge-ediff))) - -(defun git-view-file () - "View the current file in its own buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (view-file (git-fileinfo->name info)))) - -(defun git-refresh-status () - "Refresh the git status buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (message "Refreshing git status...") - (git-update-status-files) - (message "Refreshing git status...done")) - -(defun git-status-quit () - "Quit git-status mode." - (interactive) - (bury-buffer)) - -;;;; Major Mode -;;;; ------------------------------------------------------------ - -(defvar git-status-mode-hook nil - "Run after `git-status-mode' is setup.") - -(defvar git-status-mode-map nil - "Keymap for git major mode.") - -(defvar git-status nil - "List of all files managed by the git-status mode.") - -(unless git-status-mode-map - (let ((map (make-keymap)) - (commit-map (make-sparse-keymap)) - (diff-map (make-sparse-keymap)) - (toggle-map (make-sparse-keymap))) - (suppress-keymap map) - (define-key map "?" 'git-help) - (define-key map "h" 'git-help) - (define-key map " " 'git-next-file) - (define-key map "a" 'git-add-file) - (define-key map "c" 'git-commit-file) - (define-key map "\C-c" commit-map) - (define-key map "d" diff-map) - (define-key map "=" 'git-diff-file) - (define-key map "f" 'git-find-file) - (define-key map "\r" 'git-find-file) - (define-key map "g" 'git-refresh-status) - (define-key map "i" 'git-ignore-file) - (define-key map "I" 'git-insert-file) - (define-key map "l" 'git-log-file) - (define-key map "m" 'git-mark-file) - (define-key map "M" 'git-mark-all) - (define-key map "n" 'git-next-file) - (define-key map "N" 'git-next-unmerged-file) - (define-key map "o" 'git-find-file-other-window) - (define-key map "p" 'git-prev-file) - (define-key map "P" 'git-prev-unmerged-file) - (define-key map "q" 'git-status-quit) - (define-key map "r" 'git-remove-file) - (define-key map "t" toggle-map) - (define-key map "T" 'git-toggle-all-marks) - (define-key map "u" 'git-unmark-file) - (define-key map "U" 'git-revert-file) - (define-key map "v" 'git-view-file) - (define-key map "x" 'git-remove-handled) - (define-key map "\C-?" 'git-unmark-file-up) - (define-key map "\M-\C-?" 'git-unmark-all) - ; the commit submap - (define-key commit-map "\C-a" 'git-amend-commit) - (define-key commit-map "\C-b" 'git-branch) - (define-key commit-map "\C-o" 'git-checkout) - (define-key commit-map "\C-p" 'git-cherry-pick-commit) - (define-key commit-map "\C-v" 'git-revert-commit) - ; the diff submap - (define-key diff-map "b" 'git-diff-file-base) - (define-key diff-map "c" 'git-diff-file-combined) - (define-key diff-map "=" 'git-diff-file) - (define-key diff-map "e" 'git-diff-file-idiff) - (define-key diff-map "E" 'git-find-file-imerge) - (define-key diff-map "h" 'git-diff-file-merge-head) - (define-key diff-map "m" 'git-diff-file-mine) - (define-key diff-map "o" 'git-diff-file-other) - ; the toggle submap - (define-key toggle-map "u" 'git-toggle-show-uptodate) - (define-key toggle-map "i" 'git-toggle-show-ignored) - (define-key toggle-map "k" 'git-toggle-show-unknown) - (define-key toggle-map "m" 'git-toggle-all-marks) - (setq git-status-mode-map map)) - (easy-menu-define git-menu git-status-mode-map - "Git Menu" - `("Git" - ["Refresh" git-refresh-status t] - ["Commit" git-commit-file t] - ["Checkout..." git-checkout t] - ["New Branch..." git-branch t] - ["Cherry-pick Commit..." git-cherry-pick-commit t] - ["Revert Commit..." git-revert-commit t] - ("Merge" - ["Next Unmerged File" git-next-unmerged-file t] - ["Prev Unmerged File" git-prev-unmerged-file t] - ["Interactive Merge File" git-find-file-imerge t] - ["Diff Against Common Base File" git-diff-file-base t] - ["Diff Combined" git-diff-file-combined t] - ["Diff Against Merge Head" git-diff-file-merge-head t] - ["Diff Against Mine" git-diff-file-mine t] - ["Diff Against Other" git-diff-file-other t]) - "--------" - ["Add File" git-add-file t] - ["Revert File" git-revert-file t] - ["Ignore File" git-ignore-file t] - ["Remove File" git-remove-file t] - ["Insert File" git-insert-file t] - "--------" - ["Find File" git-find-file t] - ["View File" git-view-file t] - ["Diff File" git-diff-file t] - ["Interactive Diff File" git-diff-file-idiff t] - ["Log" git-log-file t] - "--------" - ["Mark" git-mark-file t] - ["Mark All" git-mark-all t] - ["Unmark" git-unmark-file t] - ["Unmark All" git-unmark-all t] - ["Toggle All Marks" git-toggle-all-marks t] - ["Hide Handled Files" git-remove-handled t] - "--------" - ["Show Uptodate Files" git-toggle-show-uptodate :style toggle :selected git-show-uptodate] - ["Show Ignored Files" git-toggle-show-ignored :style toggle :selected git-show-ignored] - ["Show Unknown Files" git-toggle-show-unknown :style toggle :selected git-show-unknown] - "--------" - ["Quit" git-status-quit t]))) - - -;; git mode should only run in the *git status* buffer -(put 'git-status-mode 'mode-class 'special) - -(defun git-status-mode () - "Major mode for interacting with Git. -Commands: -\\{git-status-mode-map}" - (kill-all-local-variables) - (buffer-disable-undo) - (setq mode-name "git status" - major-mode 'git-status-mode - goal-column 17 - buffer-read-only t) - (use-local-map git-status-mode-map) - (let ((buffer-read-only nil)) - (erase-buffer) - (let ((status (ewoc-create 'git-fileinfo-prettyprint "" ""))) - (set (make-local-variable 'git-status) status)) - (set (make-local-variable 'list-buffers-directory) default-directory) - (make-local-variable 'git-show-uptodate) - (make-local-variable 'git-show-ignored) - (make-local-variable 'git-show-unknown) - (run-hooks 'git-status-mode-hook))) - -(defun git-find-status-buffer (dir) - "Find the git status buffer handling a specified directory." - (let ((list (buffer-list)) - (fulldir (expand-file-name dir)) - found) - (while (and list (not found)) - (let ((buffer (car list))) - (with-current-buffer buffer - (when (and list-buffers-directory - (string-equal fulldir (expand-file-name list-buffers-directory)) - (eq major-mode 'git-status-mode)) - (setq found buffer)))) - (setq list (cdr list))) - found)) - -(defun git-status (dir) - "Entry point into git-status mode." - (interactive "DSelect directory: ") - (setq dir (git-get-top-dir dir)) - (if (file-exists-p (concat (file-name-as-directory dir) ".git")) - (let ((buffer (or (and git-reuse-status-buffer (git-find-status-buffer dir)) - (create-file-buffer (expand-file-name "*git-status*" dir))))) - (switch-to-buffer buffer) - (cd dir) - (git-status-mode) - (git-refresh-status) - (goto-char (point-min)) - (add-hook 'after-save-hook 'git-update-saved-file)) - (message "%s is not a git working tree." dir))) - -(defun git-update-saved-file () - "Update the corresponding git-status buffer when a file is saved. -Meant to be used in `after-save-hook'." - (let* ((file (expand-file-name buffer-file-name)) - (dir (condition-case nil (git-get-top-dir (file-name-directory file)) (error nil))) - (buffer (and dir (git-find-status-buffer dir)))) - (when buffer - (with-current-buffer buffer - (let ((filename (file-relative-name file dir))) - ; skip files located inside the .git directory - (unless (string-match "^\\.git/" filename) - (git-call-process nil "add" "--refresh" "--" filename) - (git-update-status-files (list filename)))))))) - -(defun git-help () - "Display help for Git mode." - (interactive) - (describe-function 'git-status-mode)) - -(provide 'git) -;;; git.el ends here +(error "git.el no longer ships with git. It's recommended to +replace its use with Magit, or simply delete references to git.el +in your initialization file(s). See contrib/emacs/README in git's +sources (https://github.com/git/git/blob/master/contrib/emacs/README) +for suggested alternatives and for why this happened. Emacs's own +VC mode and Magit are viable alternatives.") -- 2.17.0.rc1.321.gba9d0f2565 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH v4] git{,-blame}.el: remove old bitrotting Emacs code 2018-04-11 20:42 ` [PATCH v4] " Ævar Arnfjörð Bjarmason @ 2018-04-12 2:19 ` Junio C Hamano 2018-04-12 6:52 ` Ævar Arnfjörð Bjarmason 0 siblings, 1 reply; 26+ messages in thread From: Junio C Hamano @ 2018-04-12 2:19 UTC (permalink / raw) To: Ævar Arnfjörð Bjarmason Cc: git, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal, Kyle Meyer, Martin Ågren, Ami Fischman, Jonathan Nieder Ævar Arnfjörð Bjarmason <avarab@gmail.com> writes: > However, since downstream packagers such as Debian are packaging this > as git-el it's less disruptive to still carry these files as Elisp > code that'll error out with a message suggesting alternatives, rather > than drop the files entirely[2]. > > Then rather than receive a cryptic load error when they upgrade > existing users will get an error directing them to the README file, or > to just stop requiring these modes. I think it makes sense to link to > GitHub's hosting of contrib/emacs/README (which'll be updated by the > time users see this) so they don't have to hunt down the packaged > README on their local system. > ... > > contrib/emacs/.gitignore | 1 - > contrib/emacs/Makefile | 21 - > contrib/emacs/README | 32 +- > contrib/emacs/git-blame.el | 489 +---------- > contrib/emacs/git.el | 1710 +----------------------------------- > 5 files changed, 25 insertions(+), 2228 deletions(-) > delete mode 100644 contrib/emacs/.gitignore > delete mode 100644 contrib/emacs/Makefile I know I am to blame for prodding you to reopen this topic, but I am wondering if removal of Makefile is sensible. Is the assumption that the distro packagers won't be using this Makefile at all and have their own (e.g. debian/rules for Debian) build procedure, hence *.el files are all they need to have? The reason why I am wondering is because I do not know what distro folks would do when they find that their build procedure does not work---I suspect the would punt, and end users of the distro would find that git-el package is no longer with them. These end users are whom this discussion is trying to help, but then to these packagers, the reason why their build procedure no longer works does not really matter, whether git.el is not shipped, or Makefile that their debian/rules-equivalent depends on is not there, for them to decide dropping the git-el package. On the other hand, the 6-lines of e-lisp you wrote for git.el replacement is something the packagers could have written for their users, so (1) if we really want to go extra mile without trusting that distro packagers are less competent than us in helping their users, we'd be better off to leave Makefile in, or (2) if we trust packagers and leave possible end-user confusion as their problem (not ours), then we can just remove as your previous round did. And from that point of view, I find this round slightly odd. ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v4] git{,-blame}.el: remove old bitrotting Emacs code 2018-04-12 2:19 ` Junio C Hamano @ 2018-04-12 6:52 ` Ævar Arnfjörð Bjarmason 2018-04-12 9:23 ` Junio C Hamano 0 siblings, 1 reply; 26+ messages in thread From: Ævar Arnfjörð Bjarmason @ 2018-04-12 6:52 UTC (permalink / raw) To: Junio C Hamano Cc: git, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal, Kyle Meyer, Martin Ågren, Ami Fischman, Jonathan Nieder, Todd Zullinger On Thu, Apr 12 2018, Junio C. Hamano wrote: > Ævar Arnfjörð Bjarmason <avarab@gmail.com> writes: > >> However, since downstream packagers such as Debian are packaging this >> as git-el it's less disruptive to still carry these files as Elisp >> code that'll error out with a message suggesting alternatives, rather >> than drop the files entirely[2]. >> >> Then rather than receive a cryptic load error when they upgrade >> existing users will get an error directing them to the README file, or >> to just stop requiring these modes. I think it makes sense to link to >> GitHub's hosting of contrib/emacs/README (which'll be updated by the >> time users see this) so they don't have to hunt down the packaged >> README on their local system. >> ... >> >> contrib/emacs/.gitignore | 1 - >> contrib/emacs/Makefile | 21 - >> contrib/emacs/README | 32 +- >> contrib/emacs/git-blame.el | 489 +---------- >> contrib/emacs/git.el | 1710 +----------------------------------- >> 5 files changed, 25 insertions(+), 2228 deletions(-) >> delete mode 100644 contrib/emacs/.gitignore >> delete mode 100644 contrib/emacs/Makefile > > I know I am to blame for prodding you to reopen this topic, but I am > wondering if removal of Makefile is sensible. Is the assumption > that the distro packagers won't be using this Makefile at all and > have their own (e.g. debian/rules for Debian) build procedure, hence > *.el files are all they need to have? > > The reason why I am wondering is because I do not know what distro > folks would do when they find that their build procedure does not > work---I suspect the would punt, and end users of the distro would > find that git-el package is no longer with them. These end users > are whom this discussion is trying to help, but then to these > packagers, the reason why their build procedure no longer works does > not really matter, whether git.el is not shipped, or Makefile that > their debian/rules-equivalent depends on is not there, for them to > decide dropping the git-el package. > > On the other hand, the 6-lines of e-lisp you wrote for git.el > replacement is something the packagers could have written for their > users, so (1) if we really want to go extra mile without trusting > that distro packagers are less competent than us in helping their > users, we'd be better off to leave Makefile in, or (2) if we trust > packagers and leave possible end-user confusion as their problem > (not ours), then we can just remove as your previous round did. > > And from that point of view, I find this round slightly odd. I think the way it is makes sense. In Debian debian/git-el.install just does: contrib/emacs/git-blame.el usr/share/git-core/emacs contrib/emacs/git.el usr/share/git-core/emacs Which means on installation they don't even use our contrib/emacs/Makefile, but instead on installation do: Setting up git-el (1:2.16.3-1) ... Install git for emacs Install git for emacs24 install/git: Handling install of emacsen flavor emacs24 install/git: Byte-compiling for emacs24 + emacs24 -batch -q -no-site-file -f batch-byte-compile git.el git-blame.el Wrote /usr/share/emacs24/site-lisp/git/git.elc Wrote /usr/share/emacs24/site-lisp/git/git-blame.elc Install git for emacs25 install/git: Handling install of emacsen flavor emacs25 install/git: Byte-compiling for emacs25 + emacs25 -batch -q -no-site-file -f batch-byte-compile git.el git-blame.el RedHat does use contrib/emacs/Makefile: https://src.fedoraproject.org/cgit/rpms/git.git/tree/git.spec#n493 But they can either just do their own byte compilation as they surely do for other elisp packages, or just do this: git-init.el | 5 ----- git.spec | 9 ++------- 2 files changed, 2 insertions(+), 12 deletions(-) diff --git a/git-init.el b/git-init.el deleted file mode 100644 index d2a96a7..0000000 --- a/git-init.el +++ /dev/null @@ -1,5 +0,0 @@ -;; Git VC backend -(add-to-list 'vc-handled-backends 'GIT t) -(autoload 'git-status "git" "GIT mode." t) -(autoload 'git-blame-mode "git-blame" - "Minor mode for incremental blame for Git." t) diff --git a/git.spec b/git.spec index ee60d3e..a82c1aa 100644 --- a/git.spec +++ b/git.spec @@ -87,7 +87,6 @@ Source1: https://www.kernel.org/pub/software/scm/git/%{?rcrev:testing/}%{ Source9: gpgkey-junio.asc # Local sources begin at 10 to allow for additional future upstream sources -Source10: git-init.el Source11: git.xinetd.in Source12: git-gui.desktop Source13: gitweb-httpd.conf @@ -491,14 +490,10 @@ for i in git git-shell git-upload-pack; do done %global elispdir %{_emacs_sitelispdir}/git -make -C contrib/emacs install \ - emacsdir=%{buildroot}%{elispdir} -for elc in %{buildroot}%{elispdir}/*.elc ; do - install -pm 644 contrib/emacs/$(basename $elc .elc).el \ +for el in %{buildroot}%{elispdir}/*.el ; do + install -pm 644 contrib/emacs/$elc \ %{buildroot}%{elispdir} done -install -Dpm 644 %{SOURCE10} \ - %{buildroot}%{_emacs_sitestartdir}/git-init.el %if %{libsecret} install -pm 755 contrib/credential/libsecret/git-credential-libsecret \ I.e. there's no rule that there *must* be an *.elc file, it's just a generally good idea, but if your file is purely a one-line (error) there's no point in pre-compiling it. ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v4] git{,-blame}.el: remove old bitrotting Emacs code 2018-04-12 6:52 ` Ævar Arnfjörð Bjarmason @ 2018-04-12 9:23 ` Junio C Hamano 2018-04-18 20:16 ` Todd Zullinger 0 siblings, 1 reply; 26+ messages in thread From: Junio C Hamano @ 2018-04-12 9:23 UTC (permalink / raw) To: Ævar Arnfjörð Bjarmason Cc: git, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal, Kyle Meyer, Martin Ågren, Ami Fischman, Jonathan Nieder, Todd Zullinger Ævar Arnfjörð Bjarmason <avarab@gmail.com> writes: >> On the other hand, the 6-lines of e-lisp you wrote for git.el >> replacement is something the packagers could have written for their >> users, so (1) if we really want to go extra mile without trusting >> that distro packagers are less competent than us in helping their >> users, we'd be better off to leave Makefile in, or (2) if we trust >> packagers and leave possible end-user confusion as their problem >> (not ours), then we can just remove as your previous round did. >> >> And from that point of view, I find this round slightly odd. > > I think the way it is makes sense. In Debian debian/git-el.install just > does: > ... > RedHat does use contrib/emacs/Makefile: > ... > But they can either just do their own byte compilation as they surely do > for other elisp packages,... In short, Debian happens to be OK, but RedHat folks need to do work and cannot use what we ship out of the box, *IF* they care about end user experience. That was exactly why I felt it was "odd" (iow, "uneven"). We bother to give a stub git.el; we do not bother to make sure it would keep being installed if the packagers do not bother to update their procedure. If we do not change anything other than making *.el into stubs, then it is a lot more likely that end user experience on *any* distro that have been shipping contrib/emacs/ stuff will by default (i.e. if the packagers do not do anything to adjust) be what we design here---upon loading they'd see (error) triggering that nudge them towards modern and maintained alternatives. If we do more than that, e.g. remove Makefile, then some distros need to adjust, or their build would be broken. I suspect that the set of people Cc'ed on the thread are a lot more familiar than I am with how distro packagers prefer us to deliber, so I'll stop speculating at this point. Thanks. ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v4] git{,-blame}.el: remove old bitrotting Emacs code 2018-04-12 9:23 ` Junio C Hamano @ 2018-04-18 20:16 ` Todd Zullinger 0 siblings, 0 replies; 26+ messages in thread From: Todd Zullinger @ 2018-04-18 20:16 UTC (permalink / raw) To: Junio C Hamano Cc: Ævar Arnfjörð Bjarmason, git, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal, Kyle Meyer, Martin Ågren, Ami Fischman, Jonathan Nieder Thanks for working on this cruft cleanup Ævar and to Jonathan & Junio for asking questions about how to improve this transition for packagers & users. Junio C Hamano wrote: > Ævar Arnfjörð Bjarmason <avarab@gmail.com> writes: > >>> On the other hand, the 6-lines of e-lisp you wrote for git.el >>> replacement is something the packagers could have written for their >>> users, so (1) if we really want to go extra mile without trusting >>> that distro packagers are less competent than us in helping their >>> users, we'd be better off to leave Makefile in, or (2) if we trust >>> packagers and leave possible end-user confusion as their problem >>> (not ours), then we can just remove as your previous round did. >>> >>> And from that point of view, I find this round slightly odd. >> >> I think the way it is makes sense. In Debian debian/git-el.install just >> does: >> ... >> RedHat does use contrib/emacs/Makefile: >> ... >> But they can either just do their own byte compilation as they surely do >> for other elisp packages,... > > In short, Debian happens to be OK, but RedHat folks need to do work > and cannot use what we ship out of the box, *IF* they care about end > user experience. I don't think it's a big deal for the Fedora/Red Hat packages to adjust and manually install the stub git-el. Anyone doing automated rebuilds from the current Fedora git.spec will notice the make failure and can then check the relese notes to find out about the change, I imagine. > That was exactly why I felt it was "odd" (iow, "uneven"). We bother > to give a stub git.el; we do not bother to make sure it would keep > being installed if the packagers do not bother to update their > procedure. I wonder if leaving the Makefile in place would prevent packages from even noticing the change? It might still be a good plan to help ease the transition. I don't know if that's as important for something in contrib/ or not. > If we do not change anything other than making *.el into stubs, then > it is a lot more likely that end user experience on *any* distro > that have been shipping contrib/emacs/ stuff will by default > (i.e. if the packagers do not do anything to adjust) be what we > design here---upon loading they'd see (error) triggering that nudge > them towards modern and maintained alternatives. If we do more than > that, e.g. remove Makefile, then some distros need to adjust, or > their build would be broken. > > I suspect that the set of people Cc'ed on the thread are a lot more > familiar than I am with how distro packagers prefer us to deliber, > so I'll stop speculating at this point. I should note that I'm not an emacs user, so I likely lack a good understanding of how people use the current git{,-blame}.el files. I could simply be doing it wrong in the steps I took to test this. With the fedora packaging, we've shipped a git-init.el that adds autoload entries for git-status and git-blame-mode (since adding the emacs files in 2007). That allows users to make use of those features without adding anything to their local emacs configuration. If I open emacs with a current fedora packaging, I can issue M-x git-status or M-x git-blame-mode. After applying this patch and removing the git-init.el, that no longer works but rather than the detailed warning message, I just get a transient "no matches" in the emacs status line. However, if I add "(require 'git)" to ~/.emacs, then I get the "error: git.el no longer ships with git" message in the warnings buffer. Does this mean that only users who have manually loaded git.el will see the warning? If so, is there a preferred method to have the warning appear when calling the commands previously provided, to give a better user experience? -- Todd ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Faith, n. Belief without evidence in what is told by one who speaks without knowledge, of things without parallel. -- Ambrose Bierce, "The Devil's Dictionary" ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH] git.el: handle default excludesfile properly @ 2018-03-03 3:48 Dorab Patel 2018-03-03 8:42 ` Eric Sunshine 2018-03-06 4:38 ` [PATCH v2] git.el: handle default excludesfile properly Dorab Patel 0 siblings, 2 replies; 26+ messages in thread From: Dorab Patel @ 2018-03-03 3:48 UTC (permalink / raw) To: git; +Cc: Alexandre Julliard, Dorab Patel The previous version only looked at core.excludesfile for locating the excludesfile. So, when core.excludesfile was not defined, it did not use the possible default locations. The current version uses either $XDG_CONFIG_HOME/git/ignore or $HOME/.config/git/ignore for the default excludesfile location depending on whether XDG_CONFIG_HOME is defined or not. As per the documentation of gitignore. Signed-off-by: Dorab Patel <dorabpatel@gmail.com> --- contrib/emacs/git.el | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index 97919f2d7..16c6b4c05 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -757,8 +757,12 @@ Return the list of files that haven't been handled." (defun git-get-exclude-files () "Get the list of exclude files to pass to git-ls-files." - (let (files - (config (git-config "core.excludesfile"))) + (let* (files + (defaultconfig (if (getenv "XDG_CONFIG_HOME") + (concat (file-name-as-directory (getenv "XDG_CONFIG_HOME")) "git/ignore") + (concat (file-name-as-directory (getenv "HOME")) ".config/git/ignore"))) + (coreexcludes (git-config "core.excludesfile")) + (config (if coreexcludes coreexcludes defaultconfig))) (when (file-readable-p ".git/info/exclude") (push ".git/info/exclude" files)) (when (and config (file-readable-p config)) -- 2.16.2 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH] git.el: handle default excludesfile properly 2018-03-03 3:48 [PATCH] git.el: handle default excludesfile properly Dorab Patel @ 2018-03-03 8:42 ` Eric Sunshine 2018-03-04 1:36 ` Dorab Patel 2018-03-06 4:38 ` [PATCH v2] git.el: handle default excludesfile properly Dorab Patel 1 sibling, 1 reply; 26+ messages in thread From: Eric Sunshine @ 2018-03-03 8:42 UTC (permalink / raw) To: Dorab Patel; +Cc: Git List, Alexandre Julliard On Fri, Mar 2, 2018 at 10:48 PM, Dorab Patel <dorabpatel@gmail.com> wrote: > The previous version only looked at core.excludesfile for locating the > excludesfile. So, when core.excludesfile was not defined, it did not > use the possible default locations. > > The current version uses either $XDG_CONFIG_HOME/git/ignore or > $HOME/.config/git/ignore for the default excludesfile location > depending on whether XDG_CONFIG_HOME is defined or not. As per the > documentation of gitignore. Perhaps take $HOME/.gitignore into account too? > Signed-off-by: Dorab Patel <dorabpatel@gmail.com> ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH] git.el: handle default excludesfile properly 2018-03-03 8:42 ` Eric Sunshine @ 2018-03-04 1:36 ` Dorab Patel 2018-03-04 2:12 ` Eric Sunshine 2018-03-05 2:36 ` Junio C Hamano 0 siblings, 2 replies; 26+ messages in thread From: Dorab Patel @ 2018-03-04 1:36 UTC (permalink / raw) To: Eric Sunshine; +Cc: Git List, Alexandre Julliard [[Pardon the duplicate. I forgot to send via text/plain and the mailing list bounced it, so resending.]] Thanks for the feedback. Correct me if I'm wrong, but my understanding, from https://git-scm.com/docs/gitignore, is that $HOME/.gitignore is used only if it is specified as the value of core.excludesfile in ~/.gitconfig. It is not used by default. If that is so, then the proposed (and original) code works. The changes I am proposing handle the default case, when core.excludesfile is not specified. Looking deeper into how the function git-get-exclude-files is used, I see that it is only being called from git-run-ls-files-with-excludes. So, perhaps, a better (or additional) fix might be to add the parameter "--exclude-standard" in the call to git-run-ls-files from within git-run-ls-files-with-excludes. And remove the need for get-get-exclude-files altogether. Presumably, "--exclude-standard" handles the default case with/without XDG_CONFIG_HOME correctly. The question I'd have then is: why didn't the original author use that option? Either I'm missing something? Or the option was added later, after the original code was written? Or something else? Thoughts? On Sat, Mar 3, 2018 at 12:42 AM, Eric Sunshine <sunshine@sunshineco.com> wrote: > On Fri, Mar 2, 2018 at 10:48 PM, Dorab Patel <dorabpatel@gmail.com> wrote: >> The previous version only looked at core.excludesfile for locating the >> excludesfile. So, when core.excludesfile was not defined, it did not >> use the possible default locations. >> >> The current version uses either $XDG_CONFIG_HOME/git/ignore or >> $HOME/.config/git/ignore for the default excludesfile location >> depending on whether XDG_CONFIG_HOME is defined or not. As per the >> documentation of gitignore. > > Perhaps take $HOME/.gitignore into account too? > >> Signed-off-by: Dorab Patel <dorabpatel@gmail.com> ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH] git.el: handle default excludesfile properly 2018-03-04 1:36 ` Dorab Patel @ 2018-03-04 2:12 ` Eric Sunshine 2018-03-04 2:57 ` Dorab Patel 2018-03-05 2:36 ` Junio C Hamano 1 sibling, 1 reply; 26+ messages in thread From: Eric Sunshine @ 2018-03-04 2:12 UTC (permalink / raw) To: Dorab Patel; +Cc: Git List, Alexandre Julliard On Sat, Mar 3, 2018 at 8:36 PM, Dorab Patel <dorabpatel@gmail.com> wrote: > Correct me if I'm wrong, but my understanding, from > https://git-scm.com/docs/gitignore, is that $HOME/.gitignore is used > only if it is specified as the value of core.excludesfile in > ~/.gitconfig. It is not used by default. If that is so, then the > proposed (and original) code works. The changes I am proposing handle > the default case, when core.excludesfile is not specified. You're right. I must have set core.excludesfile so long ago that I forgot about it and assumed $HOME/.gitignore was consulted by default. > Looking deeper into how the function git-get-exclude-files is used, I > see that it is only being called from git-run-ls-files-with-excludes. > So, perhaps, a better (or additional) fix might be to add the > parameter "--exclude-standard" in the call to git-run-ls-files from > within git-run-ls-files-with-excludes. And remove the need for > get-get-exclude-files altogether. Presumably, "--exclude-standard" > handles the default case with/without XDG_CONFIG_HOME correctly. The > question I'd have then is: why didn't the original author use that > option? Either I'm missing something? Or the option was added later, > after the original code was written? Or something else? Using --exclude-standard rather than --exclude-from and retiring git-get-exclude-files() makes sense to me. As for why the original author didn't use --exclude-standard, project history tells us that. In particular, git-get-exclude-files() was implemented by 274e13e0e9 (git.el: Take into account the core.excludesfile config option., 2007-07-31), whereas --exclude-standard was introduced by 8e7b07c8a7 (git-ls-files: add --exclude-standard, 2007-11-15), three and a half months later. If you do re-roll to use --exclude-standard, then it would be good for your commit message to explain this history, citing the relevant commits. Thanks. ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH] git.el: handle default excludesfile properly 2018-03-04 2:12 ` Eric Sunshine @ 2018-03-04 2:57 ` Dorab Patel 2018-03-04 4:34 ` Eric Sunshine 0 siblings, 1 reply; 26+ messages in thread From: Dorab Patel @ 2018-03-04 2:57 UTC (permalink / raw) To: Eric Sunshine; +Cc: Git List, Alexandre Julliard Thanks for reviewing and locating the commits. OK, I'll re-roll and add the relevant commits. It may take some time. Should I just send the revised patch as a separate thread (with the relevant commits and history)? On Sat, Mar 3, 2018 at 6:12 PM, Eric Sunshine <sunshine@sunshineco.com> wrote: > On Sat, Mar 3, 2018 at 8:36 PM, Dorab Patel <dorabpatel@gmail.com> wrote: >> Correct me if I'm wrong, but my understanding, from >> https://git-scm.com/docs/gitignore, is that $HOME/.gitignore is used >> only if it is specified as the value of core.excludesfile in >> ~/.gitconfig. It is not used by default. If that is so, then the >> proposed (and original) code works. The changes I am proposing handle >> the default case, when core.excludesfile is not specified. > > You're right. I must have set core.excludesfile so long ago that I > forgot about it and assumed $HOME/.gitignore was consulted by default. > >> Looking deeper into how the function git-get-exclude-files is used, I >> see that it is only being called from git-run-ls-files-with-excludes. >> So, perhaps, a better (or additional) fix might be to add the >> parameter "--exclude-standard" in the call to git-run-ls-files from >> within git-run-ls-files-with-excludes. And remove the need for >> get-get-exclude-files altogether. Presumably, "--exclude-standard" >> handles the default case with/without XDG_CONFIG_HOME correctly. The >> question I'd have then is: why didn't the original author use that >> option? Either I'm missing something? Or the option was added later, >> after the original code was written? Or something else? > > Using --exclude-standard rather than --exclude-from and retiring > git-get-exclude-files() makes sense to me. > > As for why the original author didn't use --exclude-standard, project > history tells us that. In particular, git-get-exclude-files() was > implemented by 274e13e0e9 (git.el: Take into account the > core.excludesfile config option., 2007-07-31), whereas > --exclude-standard was introduced by 8e7b07c8a7 (git-ls-files: add > --exclude-standard, 2007-11-15), three and a half months later. > > If you do re-roll to use --exclude-standard, then it would be good for > your commit message to explain this history, citing the relevant > commits. > > Thanks. ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH] git.el: handle default excludesfile properly 2018-03-04 2:57 ` Dorab Patel @ 2018-03-04 4:34 ` Eric Sunshine 0 siblings, 0 replies; 26+ messages in thread From: Eric Sunshine @ 2018-03-04 4:34 UTC (permalink / raw) To: Dorab Patel; +Cc: Git List, Alexandre Julliard On Sat, Mar 3, 2018 at 9:57 PM, Dorab Patel <dorabpatel@gmail.com> wrote: > Thanks for reviewing and locating the commits. > > OK, I'll re-roll and add the relevant commits. It may take some time. > > Should I just send the revised patch as a separate thread (with the > relevant commits and history)? That would work. You can use "git format-patch -v2 ..." to mark the patch as "[PATCH v2]", and "git send-email --in-reply-to=20180303034803.21589-1-dorabpatel@gmail.com ..." to tie it back to this thread when you send it. As a an aid to reviewers, it's a good idea to add commentary explaining what changed since v1 and provide a link back to v1, like this[1]. Place the commentary below the "---" line following your sign-off. (One more minor comment: etiquette on this list is to avoid top-posting [2].) Thanks. [1]: https://public-inbox.org/git/20180303034803.21589-1-dorabpatel@gmail.com/ [2]: https://lkml.org/lkml/2005/1/11/111 ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH] git.el: handle default excludesfile properly 2018-03-04 1:36 ` Dorab Patel 2018-03-04 2:12 ` Eric Sunshine @ 2018-03-05 2:36 ` Junio C Hamano 2018-03-06 11:54 ` Alexandre Julliard 1 sibling, 1 reply; 26+ messages in thread From: Junio C Hamano @ 2018-03-05 2:36 UTC (permalink / raw) To: Dorab Patel; +Cc: Eric Sunshine, Git List, Alexandre Julliard Dorab Patel <dorabpatel@gmail.com> writes: > Looking deeper into how the function git-get-exclude-files is used, I > see that it is only being called from git-run-ls-files-with-excludes. > So, perhaps, a better (or additional) fix might be to add the > parameter "--exclude-standard" in the call to git-run-ls-files from > within git-run-ls-files-with-excludes. And remove the need for > get-get-exclude-files altogether. It is absolutely the right thing to depend on --exclude-standard, I would think, so that we do not have to worry about details like XDG paths and such. Thanks for working that out between both of you. Having said that, I am sorry to say that I am not sure if the copy we have is the one to be patched, so I would appreciate if Alexandre (cc'ed) can clarify the situation. The last change done to our copy of the script is from 2012, and I do not know if Alexandre is still taking care of it here but the script is so perfect that there was no need to update it for the past 5 years and we haven't seen an update, or the caninical copy is now being maintained elsewhere and we only have a stale copy, or what. Thanks. ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH] git.el: handle default excludesfile properly 2018-03-05 2:36 ` Junio C Hamano @ 2018-03-06 11:54 ` Alexandre Julliard 2018-03-07 21:52 ` Dorab Patel 2018-03-08 9:45 ` [PATCH] git{,-blame}.el: remove old bitrotting Emacs code Ævar Arnfjörð Bjarmason 0 siblings, 2 replies; 26+ messages in thread From: Alexandre Julliard @ 2018-03-06 11:54 UTC (permalink / raw) To: Junio C Hamano; +Cc: Dorab Patel, Eric Sunshine, Git List Junio C Hamano <gitster@pobox.com> writes: > Having said that, I am sorry to say that I am not sure if the copy > we have is the one to be patched, so I would appreciate if Alexandre > (cc'ed) can clarify the situation. The last change done to our copy > of the script is from 2012, and I do not know if Alexandre is still > taking care of it here but the script is so perfect that there was > no need to update it for the past 5 years and we haven't seen an > update, or the caninical copy is now being maintained elsewhere and > we only have a stale copy, or what. This is the canonical version, and I guess in theory I'm still taking care of it. However, the need that git.el was originally addressing is now fulfilled by better tools. As such, I feel that it has outlived its usefulness, and I'm no longer actively developing it. I'd recommend that anybody still using it switch to Magit, which is being actively maintained, and IMO superior to git.el in all respects. -- Alexandre Julliard julliard@winehq.org ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH] git.el: handle default excludesfile properly 2018-03-06 11:54 ` Alexandre Julliard @ 2018-03-07 21:52 ` Dorab Patel 2018-03-08 9:41 ` Ævar Arnfjörð Bjarmason 2018-03-08 9:45 ` [PATCH] git{,-blame}.el: remove old bitrotting Emacs code Ævar Arnfjörð Bjarmason 1 sibling, 1 reply; 26+ messages in thread From: Dorab Patel @ 2018-03-07 21:52 UTC (permalink / raw) To: Alexandre Julliard; +Cc: Junio C Hamano, Eric Sunshine, Git List Thanks for updating us with the status of git.el. The last time I looked at magit, it was too heavyweight for my needs. I like the simplicity of git.el. But perhaps it's time for me to take another look at magit. On Tue, Mar 6, 2018 at 3:54 AM, Alexandre Julliard <julliard@winehq.org> wrote: > Junio C Hamano <gitster@pobox.com> writes: > >> Having said that, I am sorry to say that I am not sure if the copy >> we have is the one to be patched, so I would appreciate if Alexandre >> (cc'ed) can clarify the situation. The last change done to our copy >> of the script is from 2012, and I do not know if Alexandre is still >> taking care of it here but the script is so perfect that there was >> no need to update it for the past 5 years and we haven't seen an >> update, or the caninical copy is now being maintained elsewhere and >> we only have a stale copy, or what. > > This is the canonical version, and I guess in theory I'm still taking > care of it. However, the need that git.el was originally addressing is > now fulfilled by better tools. As such, I feel that it has outlived its > usefulness, and I'm no longer actively developing it. > > I'd recommend that anybody still using it switch to Magit, which is > being actively maintained, and IMO superior to git.el in all respects. > > -- > Alexandre Julliard > julliard@winehq.org ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH] git.el: handle default excludesfile properly 2018-03-07 21:52 ` Dorab Patel @ 2018-03-08 9:41 ` Ævar Arnfjörð Bjarmason 0 siblings, 0 replies; 26+ messages in thread From: Ævar Arnfjörð Bjarmason @ 2018-03-08 9:41 UTC (permalink / raw) To: Dorab Patel; +Cc: Alexandre Julliard, Junio C Hamano, Eric Sunshine, Git List On Wed, Mar 07 2018, Dorab Patel jotted: > Thanks for updating us with the status of git.el. > > The last time I looked at magit, it was too heavyweight for my needs. > I like the simplicity of git.el. But perhaps it's time for me to take > another look at magit. You can also check out the VC mode that ships with Emacs itself. I prefer Magit, but the VC mode is more lightweight. > On Tue, Mar 6, 2018 at 3:54 AM, Alexandre Julliard <julliard@winehq.org> wrote: >> Junio C Hamano <gitster@pobox.com> writes: >> >>> Having said that, I am sorry to say that I am not sure if the copy >>> we have is the one to be patched, so I would appreciate if Alexandre >>> (cc'ed) can clarify the situation. The last change done to our copy >>> of the script is from 2012, and I do not know if Alexandre is still >>> taking care of it here but the script is so perfect that there was >>> no need to update it for the past 5 years and we haven't seen an >>> update, or the caninical copy is now being maintained elsewhere and >>> we only have a stale copy, or what. >> >> This is the canonical version, and I guess in theory I'm still taking >> care of it. However, the need that git.el was originally addressing is >> now fulfilled by better tools. As such, I feel that it has outlived its >> usefulness, and I'm no longer actively developing it. >> >> I'd recommend that anybody still using it switch to Magit, which is >> being actively maintained, and IMO superior to git.el in all respects. >> >> -- >> Alexandre Julliard >> julliard@winehq.org ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH] git{,-blame}.el: remove old bitrotting Emacs code 2018-03-06 11:54 ` Alexandre Julliard 2018-03-07 21:52 ` Dorab Patel @ 2018-03-08 9:45 ` Ævar Arnfjörð Bjarmason 2018-03-08 17:27 ` Junio C Hamano 2018-03-08 17:55 ` [PATCH] " Kyle Meyer 1 sibling, 2 replies; 26+ messages in thread From: Ævar Arnfjörð Bjarmason @ 2018-03-08 9:45 UTC (permalink / raw) To: git Cc: Junio C Hamano, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal, Ævar Arnfjörð Bjarmason The git-blame.el mode has been superseded by Emacs's own vc-annotate (invoked by C-x v g). Users of the git.el mode are now much better off using either Magit or the Git backend for Emacs's own VC mode. These modes were added over 10 years ago when Emacs's own Git support was much less mature, and there weren't other mature modes in the wild or shipped with Emacs itself. These days these modes have very few if users, and users of git aren't well served by us shipping these (some OS's install them alongside git by default, which is confusing and leads users astray). So let's remove these per Alexandre Julliard's message to the ML[1]. If someone still wants these for some reason they're better served by hosting these elsewhere (e.g. on ELPA), instead of us distributing them with git. 1. "Re: [PATCH] git.el: handle default excludesfile properly" (87muzlwhb0.fsf@winehq.org) -- https://public-inbox.org/git/87muzlwhb0.fsf@winehq.org/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> --- On Tue, Mar 06 2018, Alexandre Julliard jotted: > Junio C Hamano <gitster@pobox.com> writes: > >> Having said that, I am sorry to say that I am not sure if the copy >> we have is the one to be patched, so I would appreciate if Alexandre >> (cc'ed) can clarify the situation. The last change done to our copy >> of the script is from 2012, and I do not know if Alexandre is still >> taking care of it here but the script is so perfect that there was >> no need to update it for the past 5 years and we haven't seen an >> update, or the caninical copy is now being maintained elsewhere and >> we only have a stale copy, or what. > > This is the canonical version, and I guess in theory I'm still taking > care of it. However, the need that git.el was originally addressing is > now fulfilled by better tools. As such, I feel that it has outlived its > usefulness, and I'm no longer actively developing it. > > I'd recommend that anybody still using it switch to Magit, which is > being actively maintained, and IMO superior to git.el in all respects. I think at this point it's best to remove both of these modes from being distributed with Git, per this patch. contrib/emacs/.gitignore | 1 - contrib/emacs/Makefile | 21 - contrib/emacs/README | 39 - contrib/emacs/git-blame.el | 483 ------------- contrib/emacs/git.el | 1704 -------------------------------------------- 5 files changed, 2248 deletions(-) delete mode 100644 contrib/emacs/.gitignore delete mode 100644 contrib/emacs/Makefile delete mode 100644 contrib/emacs/README delete mode 100644 contrib/emacs/git-blame.el delete mode 100644 contrib/emacs/git.el diff --git a/contrib/emacs/.gitignore b/contrib/emacs/.gitignore deleted file mode 100644 index c531d9867f..0000000000 --- a/contrib/emacs/.gitignore +++ /dev/null @@ -1 +0,0 @@ -*.elc diff --git a/contrib/emacs/Makefile b/contrib/emacs/Makefile deleted file mode 100644 index 24d9312941..0000000000 --- a/contrib/emacs/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -## Build and install stuff - -EMACS = emacs - -ELC = git.elc git-blame.elc -INSTALL ?= install -INSTALL_ELC = $(INSTALL) -m 644 -prefix ?= $(HOME) -emacsdir = $(prefix)/share/emacs/site-lisp -RM ?= rm -f - -all: $(ELC) - -install: all - $(INSTALL) -d $(DESTDIR)$(emacsdir) - $(INSTALL_ELC) $(ELC:.elc=.el) $(ELC) $(DESTDIR)$(emacsdir) - -%.elc: %.el - $(EMACS) -batch -f batch-byte-compile $< - -clean:; $(RM) $(ELC) diff --git a/contrib/emacs/README b/contrib/emacs/README deleted file mode 100644 index 82368bdbff..0000000000 --- a/contrib/emacs/README +++ /dev/null @@ -1,39 +0,0 @@ -This directory contains various modules for Emacs support. - -To make the modules available to Emacs, you should add this directory -to your load-path, and then require the modules you want. This can be -done by adding to your .emacs something like this: - - (add-to-list 'load-path ".../git/contrib/emacs") - (require 'git) - (require 'git-blame) - - -The following modules are available: - -* git.el: - - Status manager that displays the state of all the files of the - project, and provides easy access to the most frequently used git - commands. The user interface is as far as possible compatible with - the pcl-cvs mode. It can be started with `M-x git-status'. - -* git-blame.el: - - Emacs implementation of incremental git-blame. When you turn it on - while viewing a file, the editor buffer will be updated by setting - the background of individual lines to a color that reflects which - commit it comes from. And when you move around the buffer, a - one-line summary will be shown in the echo area. - -* vc-git.el: - - This file used to contain the VC-mode backend for git, but it is no - longer distributed with git. It is now maintained as part of Emacs - and included in standard Emacs distributions starting from version - 22.2. - - If you have an earlier Emacs version, upgrading to Emacs 22 is - recommended, since the VC mode in older Emacs is not generic enough - to be able to support git in a reasonable manner, and no attempt has - been made to backport vc-git.el. diff --git a/contrib/emacs/git-blame.el b/contrib/emacs/git-blame.el deleted file mode 100644 index 510e0f7103..0000000000 --- a/contrib/emacs/git-blame.el +++ /dev/null @@ -1,483 +0,0 @@ -;;; git-blame.el --- Minor mode for incremental blame for Git -*- coding: utf-8 -*- -;; -;; Copyright (C) 2007 David Kågedal -;; -;; Authors: David Kågedal <davidk@lysator.liu.se> -;; Created: 31 Jan 2007 -;; Message-ID: <87iren2vqx.fsf@morpheus.local> -;; License: GPL -;; Keywords: git, version control, release management -;; -;; Compatibility: Emacs21, Emacs22 and EmacsCVS -;; Git 1.5 and up - -;; This file is *NOT* part of GNU Emacs. -;; This file is distributed under the same terms as GNU Emacs. - -;; This program is free software; you can redistribute it and/or -;; modify it under the terms of the GNU General Public License as -;; published by the Free Software Foundation; either version 2 of -;; the License, or (at your option) any later version. - -;; This program is distributed in the hope that it will be -;; useful, but WITHOUT ANY WARRANTY; without even the implied -;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR -;; PURPOSE. See the GNU General Public License for more details. - -;; You should have received a copy of the GNU General Public -;; License along with this program; if not, see -;; <http://www.gnu.org/licenses/>. - -;; http://www.fsf.org/copyleft/gpl.html - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;;; Commentary: -;; -;; Here is an Emacs implementation of incremental git-blame. When you -;; turn it on while viewing a file, the editor buffer will be updated by -;; setting the background of individual lines to a color that reflects -;; which commit it comes from. And when you move around the buffer, a -;; one-line summary will be shown in the echo area. - -;;; Installation: -;; -;; To use this package, put it somewhere in `load-path' (or add -;; directory with git-blame.el to `load-path'), and add the following -;; line to your .emacs: -;; -;; (require 'git-blame) -;; -;; If you do not want to load this package before it is necessary, you -;; can make use of the `autoload' feature, e.g. by adding to your .emacs -;; the following lines -;; -;; (autoload 'git-blame-mode "git-blame" -;; "Minor mode for incremental blame for Git." t) -;; -;; Then first use of `M-x git-blame-mode' would load the package. - -;;; Compatibility: -;; -;; It requires GNU Emacs 21 or later and Git 1.5.0 and up -;; -;; If you'are using Emacs 20, try changing this: -;; -;; (overlay-put ovl 'face (list :background -;; (cdr (assq 'color (cddddr info))))) -;; -;; to -;; -;; (overlay-put ovl 'face (cons 'background-color -;; (cdr (assq 'color (cddddr info))))) - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;;; Code: - -(eval-when-compile (require 'cl)) ; to use `push', `pop' -(require 'format-spec) - -(defface git-blame-prefix-face - '((((background dark)) (:foreground "gray" - :background "black")) - (((background light)) (:foreground "gray" - :background "white")) - (t (:weight bold))) - "The face used for the hash prefix." - :group 'git-blame) - -(defgroup git-blame nil - "A minor mode showing Git blame information." - :group 'git - :link '(function-link git-blame-mode)) - - -(defcustom git-blame-use-colors t - "Use colors to indicate commits in `git-blame-mode'." - :type 'boolean - :group 'git-blame) - -(defcustom git-blame-prefix-format - "%h %20A:" - "The format of the prefix added to each line in `git-blame' -mode. The format is passed to `format-spec' with the following format keys: - - %h - the abbreviated hash - %H - the full hash - %a - the author name - %A - the author email - %c - the committer name - %C - the committer email - %s - the commit summary -" - :group 'git-blame) - -(defcustom git-blame-mouseover-format - "%h %a %A: %s" - "The format of the description shown when pointing at a line in -`git-blame' mode. The format string is passed to `format-spec' -with the following format keys: - - %h - the abbreviated hash - %H - the full hash - %a - the author name - %A - the author email - %c - the committer name - %C - the committer email - %s - the commit summary -" - :group 'git-blame) - - -(defun git-blame-color-scale (&rest elements) - "Given a list, returns a list of triples formed with each -elements of the list. - -a b => bbb bba bab baa abb aba aaa aab" - (let (result) - (dolist (a elements) - (dolist (b elements) - (dolist (c elements) - (setq result (cons (format "#%s%s%s" a b c) result))))) - result)) - -;; (git-blame-color-scale "0c" "04" "24" "1c" "2c" "34" "14" "3c") => -;; ("#3c3c3c" "#3c3c14" "#3c3c34" "#3c3c2c" "#3c3c1c" "#3c3c24" -;; "#3c3c04" "#3c3c0c" "#3c143c" "#3c1414" "#3c1434" "#3c142c" ...) - -(defmacro git-blame-random-pop (l) - "Select a random element from L and returns it. Also remove -selected element from l." - ;; only works on lists with unique elements - `(let ((e (elt ,l (random (length ,l))))) - (setq ,l (remove e ,l)) - e)) - -(defvar git-blame-log-oneline-format - "format:[%cr] %cn: %s" - "*Formatting option used for describing current line in the minibuffer. - -This option is used to pass to git log --pretty= command-line option, -and describe which commit the current line was made.") - -(defvar git-blame-dark-colors - (git-blame-color-scale "0c" "04" "24" "1c" "2c" "34" "14" "3c") - "*List of colors (format #RGB) to use in a dark environment. - -To check out the list, evaluate (list-colors-display git-blame-dark-colors).") - -(defvar git-blame-light-colors - (git-blame-color-scale "c4" "d4" "cc" "dc" "f4" "e4" "fc" "ec") - "*List of colors (format #RGB) to use in a light environment. - -To check out the list, evaluate (list-colors-display git-blame-light-colors).") - -(defvar git-blame-colors '() - "Colors used by git-blame. The list is built once when activating git-blame -minor mode.") - -(defvar git-blame-ancient-color "dark green" - "*Color to be used for ancient commit.") - -(defvar git-blame-autoupdate t - "*Automatically update the blame display while editing") - -(defvar git-blame-proc nil - "The running git-blame process") -(make-variable-buffer-local 'git-blame-proc) - -(defvar git-blame-overlays nil - "The git-blame overlays used in the current buffer.") -(make-variable-buffer-local 'git-blame-overlays) - -(defvar git-blame-cache nil - "A cache of git-blame information for the current buffer") -(make-variable-buffer-local 'git-blame-cache) - -(defvar git-blame-idle-timer nil - "An idle timer that updates the blame") -(make-variable-buffer-local 'git-blame-cache) - -(defvar git-blame-update-queue nil - "A queue of update requests") -(make-variable-buffer-local 'git-blame-update-queue) - -;; FIXME: docstrings -(defvar git-blame-file nil) -(defvar git-blame-current nil) - -(defvar git-blame-mode nil) -(make-variable-buffer-local 'git-blame-mode) - -(defvar git-blame-mode-line-string " blame" - "String to display on the mode line when git-blame is active.") - -(or (assq 'git-blame-mode minor-mode-alist) - (setq minor-mode-alist - (cons '(git-blame-mode git-blame-mode-line-string) minor-mode-alist))) - -;;;###autoload -(defun git-blame-mode (&optional arg) - "Toggle minor mode for displaying Git blame - -With prefix ARG, turn the mode on if ARG is positive." - (interactive "P") - (cond - ((null arg) - (if git-blame-mode (git-blame-mode-off) (git-blame-mode-on))) - ((> (prefix-numeric-value arg) 0) (git-blame-mode-on)) - (t (git-blame-mode-off)))) - -(defun git-blame-mode-on () - "Turn on git-blame mode. - -See also function `git-blame-mode'." - (make-local-variable 'git-blame-colors) - (if git-blame-autoupdate - (add-hook 'after-change-functions 'git-blame-after-change nil t) - (remove-hook 'after-change-functions 'git-blame-after-change t)) - (git-blame-cleanup) - (let ((bgmode (cdr (assoc 'background-mode (frame-parameters))))) - (if (eq bgmode 'dark) - (setq git-blame-colors git-blame-dark-colors) - (setq git-blame-colors git-blame-light-colors))) - (setq git-blame-cache (make-hash-table :test 'equal)) - (setq git-blame-mode t) - (git-blame-run)) - -(defun git-blame-mode-off () - "Turn off git-blame mode. - -See also function `git-blame-mode'." - (git-blame-cleanup) - (if git-blame-idle-timer (cancel-timer git-blame-idle-timer)) - (setq git-blame-mode nil)) - -;;;###autoload -(defun git-reblame () - "Recalculate all blame information in the current buffer" - (interactive) - (unless git-blame-mode - (error "Git-blame is not active")) - - (git-blame-cleanup) - (git-blame-run)) - -(defun git-blame-run (&optional startline endline) - (if git-blame-proc - ;; Should maybe queue up a new run here - (message "Already running git blame") - (let ((display-buf (current-buffer)) - (blame-buf (get-buffer-create - (concat " git blame for " (buffer-name)))) - (args '("--incremental" "--contents" "-"))) - (if startline - (setq args (append args - (list "-L" (format "%d,%d" startline endline))))) - (setq args (append args - (list (file-name-nondirectory buffer-file-name)))) - (setq git-blame-proc - (apply 'start-process - "git-blame" blame-buf - "git" "blame" - args)) - (with-current-buffer blame-buf - (erase-buffer) - (make-local-variable 'git-blame-file) - (make-local-variable 'git-blame-current) - (setq git-blame-file display-buf) - (setq git-blame-current nil)) - (set-process-filter git-blame-proc 'git-blame-filter) - (set-process-sentinel git-blame-proc 'git-blame-sentinel) - (process-send-region git-blame-proc (point-min) (point-max)) - (process-send-eof git-blame-proc)))) - -(defun remove-git-blame-text-properties (start end) - (let ((modified (buffer-modified-p)) - (inhibit-read-only t)) - (remove-text-properties start end '(point-entered nil)) - (set-buffer-modified-p modified))) - -(defun git-blame-cleanup () - "Remove all blame properties" - (mapc 'delete-overlay git-blame-overlays) - (setq git-blame-overlays nil) - (remove-git-blame-text-properties (point-min) (point-max))) - -(defun git-blame-update-region (start end) - "Rerun blame to get updates between START and END" - (let ((overlays (overlays-in start end))) - (while overlays - (let ((overlay (pop overlays))) - (if (< (overlay-start overlay) start) - (setq start (overlay-start overlay))) - (if (> (overlay-end overlay) end) - (setq end (overlay-end overlay))) - (setq git-blame-overlays (delete overlay git-blame-overlays)) - (delete-overlay overlay)))) - (remove-git-blame-text-properties start end) - ;; We can be sure that start and end are at line breaks - (git-blame-run (1+ (count-lines (point-min) start)) - (count-lines (point-min) end))) - -(defun git-blame-sentinel (proc status) - (with-current-buffer (process-buffer proc) - (with-current-buffer git-blame-file - (setq git-blame-proc nil) - (if git-blame-update-queue - (git-blame-delayed-update)))) - ;;(kill-buffer (process-buffer proc)) - ;;(message "git blame finished") - ) - -(defvar in-blame-filter nil) - -(defun git-blame-filter (proc str) - (with-current-buffer (process-buffer proc) - (save-excursion - (goto-char (process-mark proc)) - (insert-before-markers str) - (goto-char (point-min)) - (unless in-blame-filter - (let ((more t) - (in-blame-filter t)) - (while more - (setq more (git-blame-parse)))))))) - -(defun git-blame-parse () - (cond ((looking-at "\\([0-9a-f]\\{40\\}\\) \\([0-9]+\\) \\([0-9]+\\) \\([0-9]+\\)\n") - (let ((hash (match-string 1)) - (src-line (string-to-number (match-string 2))) - (res-line (string-to-number (match-string 3))) - (num-lines (string-to-number (match-string 4)))) - (delete-region (point) (match-end 0)) - (setq git-blame-current (list (git-blame-new-commit hash) - src-line res-line num-lines))) - t) - ((looking-at "\\([a-z-]+\\) \\(.+\\)\n") - (let ((key (match-string 1)) - (value (match-string 2))) - (delete-region (point) (match-end 0)) - (git-blame-add-info (car git-blame-current) key value) - (when (string= key "filename") - (git-blame-create-overlay (car git-blame-current) - (caddr git-blame-current) - (cadddr git-blame-current)) - (setq git-blame-current nil))) - t) - (t - nil))) - -(defun git-blame-new-commit (hash) - (with-current-buffer git-blame-file - (or (gethash hash git-blame-cache) - ;; Assign a random color to each new commit info - ;; Take care not to select the same color multiple times - (let* ((color (if git-blame-colors - (git-blame-random-pop git-blame-colors) - git-blame-ancient-color)) - (info `(,hash (color . ,color)))) - (puthash hash info git-blame-cache) - info)))) - -(defun git-blame-create-overlay (info start-line num-lines) - (with-current-buffer git-blame-file - (save-excursion - (let ((inhibit-point-motion-hooks t) - (inhibit-modification-hooks t)) - (goto-char (point-min)) - (forward-line (1- start-line)) - (let* ((start (point)) - (end (progn (forward-line num-lines) (point))) - (ovl (make-overlay start end)) - (hash (car info)) - (spec `((?h . ,(substring hash 0 6)) - (?H . ,hash) - (?a . ,(git-blame-get-info info 'author)) - (?A . ,(git-blame-get-info info 'author-mail)) - (?c . ,(git-blame-get-info info 'committer)) - (?C . ,(git-blame-get-info info 'committer-mail)) - (?s . ,(git-blame-get-info info 'summary))))) - (push ovl git-blame-overlays) - (overlay-put ovl 'git-blame info) - (overlay-put ovl 'help-echo - (format-spec git-blame-mouseover-format spec)) - (if git-blame-use-colors - (overlay-put ovl 'face (list :background - (cdr (assq 'color (cdr info)))))) - (overlay-put ovl 'line-prefix - (propertize (format-spec git-blame-prefix-format spec) - 'face 'git-blame-prefix-face))))))) - -(defun git-blame-add-info (info key value) - (nconc info (list (cons (intern key) value)))) - -(defun git-blame-get-info (info key) - (cdr (assq key (cdr info)))) - -(defun git-blame-current-commit () - (let ((info (get-char-property (point) 'git-blame))) - (if info - (car info) - (error "No commit info")))) - -(defun git-describe-commit (hash) - (with-temp-buffer - (call-process "git" nil t nil - "log" "-1" - (concat "--pretty=" git-blame-log-oneline-format) - hash) - (buffer-substring (point-min) (point-max)))) - -(defvar git-blame-last-identification nil) -(make-variable-buffer-local 'git-blame-last-identification) -(defun git-blame-identify (&optional hash) - (interactive) - (let ((info (gethash (or hash (git-blame-current-commit)) git-blame-cache))) - (when (and info (not (eq info git-blame-last-identification))) - (message "%s" (nth 4 info)) - (setq git-blame-last-identification info)))) - -;; (defun git-blame-after-save () -;; (when git-blame-mode -;; (git-blame-cleanup) -;; (git-blame-run))) -;; (add-hook 'after-save-hook 'git-blame-after-save) - -(defun git-blame-after-change (start end length) - (when git-blame-mode - (git-blame-enq-update start end))) - -(defvar git-blame-last-update nil) -(make-variable-buffer-local 'git-blame-last-update) -(defun git-blame-enq-update (start end) - "Mark the region between START and END as needing blame update" - ;; Try to be smart and avoid multiple callouts for sequential - ;; editing - (cond ((and git-blame-last-update - (= start (cdr git-blame-last-update))) - (setcdr git-blame-last-update end)) - ((and git-blame-last-update - (= end (car git-blame-last-update))) - (setcar git-blame-last-update start)) - (t - (setq git-blame-last-update (cons start end)) - (setq git-blame-update-queue (nconc git-blame-update-queue - (list git-blame-last-update))))) - (unless (or git-blame-proc git-blame-idle-timer) - (setq git-blame-idle-timer - (run-with-idle-timer 0.5 nil 'git-blame-delayed-update)))) - -(defun git-blame-delayed-update () - (setq git-blame-idle-timer nil) - (if git-blame-update-queue - (let ((first (pop git-blame-update-queue)) - (inhibit-point-motion-hooks t)) - (git-blame-update-region (car first) (cdr first))))) - -(provide 'git-blame) - -;;; git-blame.el ends here diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el deleted file mode 100644 index 97919f2d73..0000000000 --- a/contrib/emacs/git.el +++ /dev/null @@ -1,1704 +0,0 @@ -;;; git.el --- A user interface for git - -;; Copyright (C) 2005, 2006, 2007, 2008, 2009 Alexandre Julliard <julliard@winehq.org> - -;; Version: 1.0 - -;; This program is free software; you can redistribute it and/or -;; modify it under the terms of the GNU General Public License as -;; published by the Free Software Foundation; either version 2 of -;; the License, or (at your option) any later version. -;; -;; This program is distributed in the hope that it will be -;; useful, but WITHOUT ANY WARRANTY; without even the implied -;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR -;; PURPOSE. See the GNU General Public License for more details. -;; -;; You should have received a copy of the GNU General Public -;; License along with this program; if not, see -;; <http://www.gnu.org/licenses/>. - -;;; Commentary: - -;; This file contains an interface for the git version control -;; system. It provides easy access to the most frequently used git -;; commands. The user interface is as far as possible identical to -;; that of the PCL-CVS mode. -;; -;; To install: put this file on the load-path and place the following -;; in your .emacs file: -;; -;; (require 'git) -;; -;; To start: `M-x git-status' -;; -;; TODO -;; - diff against other branch -;; - renaming files from the status buffer -;; - creating tags -;; - fetch/pull -;; - revlist browser -;; - git-show-branch browser -;; - -;;; Compatibility: -;; -;; This file works on GNU Emacs 21 or later. It may work on older -;; versions but this is not guaranteed. -;; -;; It may work on XEmacs 21, provided that you first install the ewoc -;; and log-edit packages. -;; - -(eval-when-compile (require 'cl)) -(require 'ewoc) -(require 'log-edit) -(require 'easymenu) - - -;;;; Customizations -;;;; ------------------------------------------------------------ - -(defgroup git nil - "A user interface for the git versioning system." - :group 'tools) - -(defcustom git-committer-name nil - "User name to use for commits. -The default is to fall back to the repository config, -then to `add-log-full-name' and then to `user-full-name'." - :group 'git - :type '(choice (const :tag "Default" nil) - (string :tag "Name"))) - -(defcustom git-committer-email nil - "Email address to use for commits. -The default is to fall back to the git repository config, -then to `add-log-mailing-address' and then to `user-mail-address'." - :group 'git - :type '(choice (const :tag "Default" nil) - (string :tag "Email"))) - -(defcustom git-commits-coding-system nil - "Default coding system for the log message of git commits." - :group 'git - :type '(choice (const :tag "From repository config" nil) - (coding-system))) - -(defcustom git-append-signed-off-by nil - "Whether to append a Signed-off-by line to the commit message before editing." - :group 'git - :type 'boolean) - -(defcustom git-reuse-status-buffer t - "Whether `git-status' should try to reuse an existing buffer -if there is already one that displays the same directory." - :group 'git - :type 'boolean) - -(defcustom git-per-dir-ignore-file ".gitignore" - "Name of the per-directory ignore file." - :group 'git - :type 'string) - -(defcustom git-show-uptodate nil - "Whether to display up-to-date files." - :group 'git - :type 'boolean) - -(defcustom git-show-ignored nil - "Whether to display ignored files." - :group 'git - :type 'boolean) - -(defcustom git-show-unknown t - "Whether to display unknown files." - :group 'git - :type 'boolean) - - -(defface git-status-face - '((((class color) (background light)) (:foreground "purple")) - (((class color) (background dark)) (:foreground "salmon"))) - "Git mode face used to highlight added and modified files." - :group 'git) - -(defface git-unmerged-face - '((((class color) (background light)) (:foreground "red" :bold t)) - (((class color) (background dark)) (:foreground "red" :bold t))) - "Git mode face used to highlight unmerged files." - :group 'git) - -(defface git-unknown-face - '((((class color) (background light)) (:foreground "goldenrod" :bold t)) - (((class color) (background dark)) (:foreground "goldenrod" :bold t))) - "Git mode face used to highlight unknown files." - :group 'git) - -(defface git-uptodate-face - '((((class color) (background light)) (:foreground "grey60")) - (((class color) (background dark)) (:foreground "grey40"))) - "Git mode face used to highlight up-to-date files." - :group 'git) - -(defface git-ignored-face - '((((class color) (background light)) (:foreground "grey60")) - (((class color) (background dark)) (:foreground "grey40"))) - "Git mode face used to highlight ignored files." - :group 'git) - -(defface git-mark-face - '((((class color) (background light)) (:foreground "red" :bold t)) - (((class color) (background dark)) (:foreground "tomato" :bold t))) - "Git mode face used for the file marks." - :group 'git) - -(defface git-header-face - '((((class color) (background light)) (:foreground "blue")) - (((class color) (background dark)) (:foreground "blue"))) - "Git mode face used for commit headers." - :group 'git) - -(defface git-separator-face - '((((class color) (background light)) (:foreground "brown")) - (((class color) (background dark)) (:foreground "brown"))) - "Git mode face used for commit separator." - :group 'git) - -(defface git-permission-face - '((((class color) (background light)) (:foreground "green" :bold t)) - (((class color) (background dark)) (:foreground "green" :bold t))) - "Git mode face used for permission changes." - :group 'git) - - -;;;; Utilities -;;;; ------------------------------------------------------------ - -(defconst git-log-msg-separator "--- log message follows this line ---") - -(defvar git-log-edit-font-lock-keywords - `(("^\\(Author:\\|Date:\\|Merge:\\|Signed-off-by:\\)\\(.*\\)$" - (1 font-lock-keyword-face) - (2 font-lock-function-name-face)) - (,(concat "^\\(" (regexp-quote git-log-msg-separator) "\\)$") - (1 font-lock-comment-face)))) - -(defun git-get-env-strings (env) - "Build a list of NAME=VALUE strings from a list of environment strings." - (mapcar (lambda (entry) (concat (car entry) "=" (cdr entry))) env)) - -(defun git-call-process (buffer &rest args) - "Wrapper for call-process that sets environment strings." - (apply #'call-process "git" nil buffer nil args)) - -(defun git-call-process-display-error (&rest args) - "Wrapper for call-process that displays error messages." - (let* ((dir default-directory) - (buffer (get-buffer-create "*Git Command Output*")) - (ok (with-current-buffer buffer - (let ((default-directory dir) - (buffer-read-only nil)) - (erase-buffer) - (eq 0 (apply #'git-call-process (list buffer t) args)))))) - (unless ok (display-message-or-buffer buffer)) - ok)) - -(defun git-call-process-string (&rest args) - "Wrapper for call-process that returns the process output as a string, -or nil if the git command failed." - (with-temp-buffer - (and (eq 0 (apply #'git-call-process t args)) - (buffer-string)))) - -(defun git-call-process-string-display-error (&rest args) - "Wrapper for call-process that displays error message and returns -the process output as a string, or nil if the git command failed." - (with-temp-buffer - (if (eq 0 (apply #'git-call-process (list t t) args)) - (buffer-string) - (display-message-or-buffer (current-buffer)) - nil))) - -(defun git-run-process-region (buffer start end program args) - "Run a git process with a buffer region as input." - (let ((output-buffer (current-buffer)) - (dir default-directory)) - (with-current-buffer buffer - (cd dir) - (apply #'call-process-region start end program - nil (list output-buffer t) nil args)))) - -(defun git-run-command-buffer (buffer-name &rest args) - "Run a git command, sending the output to a buffer named BUFFER-NAME." - (let ((dir default-directory) - (buffer (get-buffer-create buffer-name))) - (message "Running git %s..." (car args)) - (with-current-buffer buffer - (let ((default-directory dir) - (buffer-read-only nil)) - (erase-buffer) - (apply #'git-call-process buffer args))) - (message "Running git %s...done" (car args)) - buffer)) - -(defun git-run-command-region (buffer start end env &rest args) - "Run a git command with specified buffer region as input." - (with-temp-buffer - (if (eq 0 (if env - (git-run-process-region - buffer start end "env" - (append (git-get-env-strings env) (list "git") args)) - (git-run-process-region buffer start end "git" args))) - (buffer-string) - (display-message-or-buffer (current-buffer)) - nil))) - -(defun git-run-hook (hook env &rest args) - "Run a git hook and display its output if any." - (let ((dir default-directory) - (hook-name (expand-file-name (concat ".git/hooks/" hook)))) - (or (not (file-executable-p hook-name)) - (let (status (buffer (get-buffer-create "*Git Hook Output*"))) - (with-current-buffer buffer - (erase-buffer) - (cd dir) - (setq status - (if env - (apply #'call-process "env" nil (list buffer t) nil - (append (git-get-env-strings env) (list hook-name) args)) - (apply #'call-process hook-name nil (list buffer t) nil args)))) - (display-message-or-buffer buffer) - (eq 0 status))))) - -(defun git-get-string-sha1 (string) - "Read a SHA1 from the specified string." - (and string - (string-match "[0-9a-f]\\{40\\}" string) - (match-string 0 string))) - -(defun git-get-committer-name () - "Return the name to use as GIT_COMMITTER_NAME." - ; copied from log-edit - (or git-committer-name - (git-config "user.name") - (and (boundp 'add-log-full-name) add-log-full-name) - (and (fboundp 'user-full-name) (user-full-name)) - (and (boundp 'user-full-name) user-full-name))) - -(defun git-get-committer-email () - "Return the email address to use as GIT_COMMITTER_EMAIL." - ; copied from log-edit - (or git-committer-email - (git-config "user.email") - (and (boundp 'add-log-mailing-address) add-log-mailing-address) - (and (fboundp 'user-mail-address) (user-mail-address)) - (and (boundp 'user-mail-address) user-mail-address))) - -(defun git-get-commits-coding-system () - "Return the coding system to use for commits." - (let ((repo-config (git-config "i18n.commitencoding"))) - (or git-commits-coding-system - (and repo-config - (fboundp 'locale-charset-to-coding-system) - (locale-charset-to-coding-system repo-config)) - 'utf-8))) - -(defun git-get-logoutput-coding-system () - "Return the coding system used for git-log output." - (let ((repo-config (or (git-config "i18n.logoutputencoding") - (git-config "i18n.commitencoding")))) - (or git-commits-coding-system - (and repo-config - (fboundp 'locale-charset-to-coding-system) - (locale-charset-to-coding-system repo-config)) - 'utf-8))) - -(defun git-escape-file-name (name) - "Escape a file name if necessary." - (if (string-match "[\n\t\"\\]" name) - (concat "\"" - (mapconcat (lambda (c) - (case c - (?\n "\\n") - (?\t "\\t") - (?\\ "\\\\") - (?\" "\\\"") - (t (char-to-string c)))) - name "") - "\"") - name)) - -(defun git-success-message (text files) - "Print a success message after having handled FILES." - (let ((n (length files))) - (if (equal n 1) - (message "%s %s" text (car files)) - (message "%s %d files" text n)))) - -(defun git-get-top-dir (dir) - "Retrieve the top-level directory of a git tree." - (let ((cdup (with-output-to-string - (with-current-buffer standard-output - (cd dir) - (unless (eq 0 (git-call-process t "rev-parse" "--show-cdup")) - (error "cannot find top-level git tree for %s." dir)))))) - (expand-file-name (concat (file-name-as-directory dir) - (car (split-string cdup "\n")))))) - -;stolen from pcl-cvs -(defun git-append-to-ignore (file) - "Add a file name to the ignore file in its directory." - (let* ((fullname (expand-file-name file)) - (dir (file-name-directory fullname)) - (name (file-name-nondirectory fullname)) - (ignore-name (expand-file-name git-per-dir-ignore-file dir)) - (created (not (file-exists-p ignore-name)))) - (save-window-excursion - (set-buffer (find-file-noselect ignore-name)) - (goto-char (point-max)) - (unless (zerop (current-column)) (insert "\n")) - (insert "/" name "\n") - (sort-lines nil (point-min) (point-max)) - (save-buffer)) - (when created - (git-call-process nil "update-index" "--add" "--" (file-relative-name ignore-name))) - (git-update-status-files (list (file-relative-name ignore-name))))) - -; propertize definition for XEmacs, stolen from erc-compat -(eval-when-compile - (unless (fboundp 'propertize) - (defun propertize (string &rest props) - (let ((string (copy-sequence string))) - (while props - (put-text-property 0 (length string) (nth 0 props) (nth 1 props) string) - (setq props (cddr props))) - string)))) - -;;;; Wrappers for basic git commands -;;;; ------------------------------------------------------------ - -(defun git-rev-parse (rev) - "Parse a revision name and return its SHA1." - (git-get-string-sha1 - (git-call-process-string "rev-parse" rev))) - -(defun git-config (key) - "Retrieve the value associated to KEY in the git repository config file." - (let ((str (git-call-process-string "config" key))) - (and str (car (split-string str "\n"))))) - -(defun git-symbolic-ref (ref) - "Wrapper for the git-symbolic-ref command." - (let ((str (git-call-process-string "symbolic-ref" ref))) - (and str (car (split-string str "\n"))))) - -(defun git-update-ref (ref newval &optional oldval reason) - "Update a reference by calling git-update-ref." - (let ((args (and oldval (list oldval)))) - (when newval (push newval args)) - (push ref args) - (when reason - (push reason args) - (push "-m" args)) - (unless newval (push "-d" args)) - (apply 'git-call-process-display-error "update-ref" args))) - -(defun git-for-each-ref (&rest specs) - "Return a list of refs using git-for-each-ref. -Each entry is a cons of (SHORT-NAME . FULL-NAME)." - (let (refs) - (with-temp-buffer - (apply #'git-call-process t "for-each-ref" "--format=%(refname)" specs) - (goto-char (point-min)) - (while (re-search-forward "^[^/\n]+/[^/\n]+/\\(.+\\)$" nil t) - (push (cons (match-string 1) (match-string 0)) refs))) - (nreverse refs))) - -(defun git-read-tree (tree &optional index-file) - "Read a tree into the index file." - (let ((process-environment - (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) process-environment))) - (apply 'git-call-process-display-error "read-tree" (if tree (list tree))))) - -(defun git-write-tree (&optional index-file) - "Call git-write-tree and return the resulting tree SHA1 as a string." - (let ((process-environment - (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) process-environment))) - (git-get-string-sha1 - (git-call-process-string-display-error "write-tree")))) - -(defun git-commit-tree (buffer tree parent) - "Create a commit and possibly update HEAD. -Create a commit with the message in BUFFER using the tree with hash TREE. -Use PARENT as the parent of the new commit. If PARENT is the current \"HEAD\", -update the \"HEAD\" reference to the new commit." - (let ((author-name (git-get-committer-name)) - (author-email (git-get-committer-email)) - (subject "commit (initial): ") - author-date log-start log-end args coding-system-for-write) - (when parent - (setq subject "commit: ") - (push "-p" args) - (push parent args)) - (with-current-buffer buffer - (goto-char (point-min)) - (if - (setq log-start (re-search-forward (concat "^" (regexp-quote git-log-msg-separator) "\n") nil t)) - (save-restriction - (narrow-to-region (point-min) log-start) - (goto-char (point-min)) - (when (re-search-forward "^Author: +\\(.*?\\) *<\\(.*\\)> *$" nil t) - (setq author-name (match-string 1) - author-email (match-string 2))) - (goto-char (point-min)) - (when (re-search-forward "^Date: +\\(.*\\)$" nil t) - (setq author-date (match-string 1))) - (goto-char (point-min)) - (when (re-search-forward "^Merge: +\\(.*\\)" nil t) - (setq subject "commit (merge): ") - (dolist (parent (split-string (match-string 1) " +" t)) - (push "-p" args) - (push parent args)))) - (setq log-start (point-min))) - (setq log-end (point-max)) - (goto-char log-start) - (when (re-search-forward ".*$" nil t) - (setq subject (concat subject (match-string 0)))) - (setq coding-system-for-write buffer-file-coding-system)) - (let ((commit - (git-get-string-sha1 - (let ((env `(("GIT_AUTHOR_NAME" . ,author-name) - ("GIT_AUTHOR_EMAIL" . ,author-email) - ("GIT_COMMITTER_NAME" . ,(git-get-committer-name)) - ("GIT_COMMITTER_EMAIL" . ,(git-get-committer-email))))) - (when author-date (push `("GIT_AUTHOR_DATE" . ,author-date) env)) - (apply #'git-run-command-region - buffer log-start log-end env - "commit-tree" tree (nreverse args)))))) - (when commit (git-update-ref "HEAD" commit parent subject)) - commit))) - -(defun git-empty-db-p () - "Check if the git db is empty (no commit done yet)." - (not (eq 0 (git-call-process nil "rev-parse" "--verify" "HEAD")))) - -(defun git-get-merge-heads () - "Retrieve the merge heads from the MERGE_HEAD file if present." - (let (heads) - (when (file-readable-p ".git/MERGE_HEAD") - (with-temp-buffer - (insert-file-contents ".git/MERGE_HEAD" nil nil nil t) - (goto-char (point-min)) - (while (re-search-forward "[0-9a-f]\\{40\\}" nil t) - (push (match-string 0) heads)))) - (nreverse heads))) - -(defun git-get-commit-description (commit) - "Get a one-line description of COMMIT." - (let ((coding-system-for-read (git-get-logoutput-coding-system))) - (let ((descr (git-call-process-string "log" "--max-count=1" "--pretty=oneline" commit))) - (if (and descr (string-match "\\`\\([0-9a-f]\\{40\\}\\) *\\(.*\\)$" descr)) - (concat (substring (match-string 1 descr) 0 10) " - " (match-string 2 descr)) - descr)))) - -;;;; File info structure -;;;; ------------------------------------------------------------ - -; fileinfo structure stolen from pcl-cvs -(defstruct (git-fileinfo - (:copier nil) - (:constructor git-create-fileinfo (state name &optional old-perm new-perm rename-state orig-name marked)) - (:conc-name git-fileinfo->)) - marked ;; t/nil - state ;; current state - name ;; file name - old-perm new-perm ;; permission flags - rename-state ;; rename or copy state - orig-name ;; original name for renames or copies - needs-update ;; whether file needs to be updated - needs-refresh) ;; whether file needs to be refreshed - -(defvar git-status nil) - -(defun git-set-fileinfo-state (info state) - "Set the state of a file info." - (unless (eq (git-fileinfo->state info) state) - (setf (git-fileinfo->state info) state - (git-fileinfo->new-perm info) (git-fileinfo->old-perm info) - (git-fileinfo->rename-state info) nil - (git-fileinfo->orig-name info) nil - (git-fileinfo->needs-update info) nil - (git-fileinfo->needs-refresh info) t))) - -(defun git-status-filenames-map (status func files &rest args) - "Apply FUNC to the status files names in the FILES list. -The list must be sorted." - (when files - (let ((file (pop files)) - (node (ewoc-nth status 0))) - (while (and file node) - (let* ((info (ewoc-data node)) - (name (git-fileinfo->name info))) - (if (string-lessp name file) - (setq node (ewoc-next status node)) - (if (string-equal name file) - (apply func info args)) - (setq file (pop files)))))))) - -(defun git-set-filenames-state (status files state) - "Set the state of a list of named files. The list must be sorted" - (when files - (git-status-filenames-map status #'git-set-fileinfo-state files state) - (unless state ;; delete files whose state has been set to nil - (ewoc-filter status (lambda (info) (git-fileinfo->state info)))))) - -(defun git-state-code (code) - "Convert from a string to a added/deleted/modified state." - (case (string-to-char code) - (?M 'modified) - (?? 'unknown) - (?A 'added) - (?D 'deleted) - (?U 'unmerged) - (?T 'modified) - (t nil))) - -(defun git-status-code-as-string (code) - "Format a git status code as string." - (case code - ('modified (propertize "Modified" 'face 'git-status-face)) - ('unknown (propertize "Unknown " 'face 'git-unknown-face)) - ('added (propertize "Added " 'face 'git-status-face)) - ('deleted (propertize "Deleted " 'face 'git-status-face)) - ('unmerged (propertize "Unmerged" 'face 'git-unmerged-face)) - ('uptodate (propertize "Uptodate" 'face 'git-uptodate-face)) - ('ignored (propertize "Ignored " 'face 'git-ignored-face)) - (t "? "))) - -(defun git-file-type-as-string (old-perm new-perm) - "Return a string describing the file type based on its permissions." - (let* ((old-type (lsh (or old-perm 0) -9)) - (new-type (lsh (or new-perm 0) -9)) - (str (case new-type - (64 ;; file - (case old-type - (64 nil) - (80 " (type change symlink -> file)") - (112 " (type change subproject -> file)"))) - (80 ;; symlink - (case old-type - (64 " (type change file -> symlink)") - (112 " (type change subproject -> symlink)") - (t " (symlink)"))) - (112 ;; subproject - (case old-type - (64 " (type change file -> subproject)") - (80 " (type change symlink -> subproject)") - (t " (subproject)"))) - (72 nil) ;; directory (internal, not a real git state) - (0 ;; deleted or unknown - (case old-type - (80 " (symlink)") - (112 " (subproject)"))) - (t (format " (unknown type %o)" new-type))))) - (cond (str (propertize str 'face 'git-status-face)) - ((eq new-type 72) "/") - (t "")))) - -(defun git-rename-as-string (info) - "Return a string describing the copy or rename associated with INFO, or an empty string if none." - (let ((state (git-fileinfo->rename-state info))) - (if state - (propertize - (concat " (" - (if (eq state 'copy) "copied from " - (if (eq (git-fileinfo->state info) 'added) "renamed from " - "renamed to ")) - (git-escape-file-name (git-fileinfo->orig-name info)) - ")") 'face 'git-status-face) - ""))) - -(defun git-permissions-as-string (old-perm new-perm) - "Format a permission change as string." - (propertize - (if (or (not old-perm) - (not new-perm) - (eq 0 (logand ?\111 (logxor old-perm new-perm)))) - " " - (if (eq 0 (logand ?\111 old-perm)) "+x" "-x")) - 'face 'git-permission-face)) - -(defun git-fileinfo-prettyprint (info) - "Pretty-printer for the git-fileinfo structure." - (let ((old-perm (git-fileinfo->old-perm info)) - (new-perm (git-fileinfo->new-perm info))) - (insert (concat " " (if (git-fileinfo->marked info) (propertize "*" 'face 'git-mark-face) " ") - " " (git-status-code-as-string (git-fileinfo->state info)) - " " (git-permissions-as-string old-perm new-perm) - " " (git-escape-file-name (git-fileinfo->name info)) - (git-file-type-as-string old-perm new-perm) - (git-rename-as-string info))))) - -(defun git-update-node-fileinfo (node info) - "Update the fileinfo of the specified node. The names are assumed to match already." - (let ((data (ewoc-data node))) - (setf - ;; preserve the marked flag - (git-fileinfo->marked info) (git-fileinfo->marked data) - (git-fileinfo->needs-update data) nil) - (when (not (equal info data)) - (setf (git-fileinfo->needs-refresh info) t - (ewoc-data node) info)))) - -(defun git-insert-info-list (status infolist files) - "Insert a sorted list of file infos in the status buffer, replacing existing ones if any." - (let* ((info (pop infolist)) - (node (ewoc-nth status 0)) - (name (and info (git-fileinfo->name info))) - remaining) - (while info - (let ((nodename (and node (git-fileinfo->name (ewoc-data node))))) - (while (and files (string-lessp (car files) name)) - (push (pop files) remaining)) - (when (and files (string-equal (car files) name)) - (setq files (cdr files))) - (cond ((not nodename) - (setq node (ewoc-enter-last status info)) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info)))) - ((string-lessp nodename name) - (setq node (ewoc-next status node))) - ((string-equal nodename name) - ;; preserve the marked flag - (git-update-node-fileinfo node info) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info)))) - (t - (setq node (ewoc-enter-before status node info)) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info))))))) - (nconc (nreverse remaining) files))) - -(defun git-run-diff-index (status files) - "Run git-diff-index on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "diff-index" "-z" "-M" "HEAD" "--" files) - (goto-char (point-min)) - (while (re-search-forward - ":\\([0-7]\\{6\\}\\) \\([0-7]\\{6\\}\\) [0-9a-f]\\{40\\} [0-9a-f]\\{40\\} \\(\\([ADMUT]\\)\0\\([^\0]+\\)\\|\\([CR]\\)[0-9]*\0\\([^\0]+\\)\0\\([^\0]+\\)\\)\0" - nil t 1) - (let ((old-perm (string-to-number (match-string 1) 8)) - (new-perm (string-to-number (match-string 2) 8)) - (state (or (match-string 4) (match-string 6))) - (name (or (match-string 5) (match-string 7))) - (new-name (match-string 8))) - (if new-name ; copy or rename - (if (eq ?C (string-to-char state)) - (push (git-create-fileinfo 'added new-name old-perm new-perm 'copy name) infolist) - (push (git-create-fileinfo 'deleted name 0 0 'rename new-name) infolist) - (push (git-create-fileinfo 'added new-name old-perm new-perm 'rename name) infolist)) - (push (git-create-fileinfo (git-state-code state) name old-perm new-perm) infolist))))) - (setq infolist (sort (nreverse infolist) - (lambda (info1 info2) - (string-lessp (git-fileinfo->name info1) - (git-fileinfo->name info2))))) - (git-insert-info-list status infolist files))) - -(defun git-find-status-file (status file) - "Find a given file in the status ewoc and return its node." - (let ((node (ewoc-nth status 0))) - (while (and node (not (string= file (git-fileinfo->name (ewoc-data node))))) - (setq node (ewoc-next status node))) - node)) - -(defun git-run-ls-files (status files default-state &rest options) - "Run git-ls-files on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" (append options (list "--") files)) - (goto-char (point-min)) - (while (re-search-forward "\\([^\0]*?\\)\\(/?\\)\0" nil t 1) - (let ((name (match-string 1))) - (push (git-create-fileinfo default-state name 0 - (if (string-equal "/" (match-string 2)) (lsh ?\110 9) 0)) - infolist)))) - (setq infolist (nreverse infolist)) ;; assume it is sorted already - (git-insert-info-list status infolist files))) - -(defun git-run-ls-files-cached (status files default-state) - "Run git-ls-files -c on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" "-s" "-c" "--" files) - (goto-char (point-min)) - (while (re-search-forward "\\([0-7]\\{6\\}\\) [0-9a-f]\\{40\\} 0\t\\([^\0]+\\)\0" nil t) - (let* ((new-perm (string-to-number (match-string 1) 8)) - (old-perm (if (eq default-state 'added) 0 new-perm)) - (name (match-string 2))) - (push (git-create-fileinfo default-state name old-perm new-perm) infolist)))) - (setq infolist (nreverse infolist)) ;; assume it is sorted already - (git-insert-info-list status infolist files))) - -(defun git-run-ls-unmerged (status files) - "Run git-ls-files -u on FILES and parse the results into STATUS." - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" "-u" "--" files) - (goto-char (point-min)) - (let (unmerged-files) - (while (re-search-forward "[0-7]\\{6\\} [0-9a-f]\\{40\\} [123]\t\\([^\0]+\\)\0" nil t) - (push (match-string 1) unmerged-files)) - (setq unmerged-files (nreverse unmerged-files)) ;; assume it is sorted already - (git-set-filenames-state status unmerged-files 'unmerged)))) - -(defun git-get-exclude-files () - "Get the list of exclude files to pass to git-ls-files." - (let (files - (config (git-config "core.excludesfile"))) - (when (file-readable-p ".git/info/exclude") - (push ".git/info/exclude" files)) - (when (and config (file-readable-p config)) - (push config files)) - files)) - -(defun git-run-ls-files-with-excludes (status files default-state &rest options) - "Run git-ls-files on FILES with appropriate --exclude-from options." - (let ((exclude-files (git-get-exclude-files))) - (apply #'git-run-ls-files status files default-state "--directory" "--no-empty-directory" - (concat "--exclude-per-directory=" git-per-dir-ignore-file) - (append options (mapcar (lambda (f) (concat "--exclude-from=" f)) exclude-files))))) - -(defun git-update-status-files (&optional files mark-files) - "Update the status of FILES from the index. -The FILES list must be sorted." - (unless git-status (error "Not in git-status buffer.")) - ;; set the needs-update flag on existing files - (if files - (git-status-filenames-map - git-status (lambda (info) (setf (git-fileinfo->needs-update info) t)) files) - (ewoc-map (lambda (info) (setf (git-fileinfo->needs-update info) t) nil) git-status) - (git-call-process nil "update-index" "--refresh") - (when git-show-uptodate - (git-run-ls-files-cached git-status nil 'uptodate))) - (let ((remaining-files - (if (git-empty-db-p) ; we need some special handling for an empty db - (git-run-ls-files-cached git-status files 'added) - (git-run-diff-index git-status files)))) - (git-run-ls-unmerged git-status files) - (when (or remaining-files (and git-show-unknown (not files))) - (setq remaining-files (git-run-ls-files-with-excludes git-status remaining-files 'unknown "-o"))) - (when (or remaining-files (and git-show-ignored (not files))) - (setq remaining-files (git-run-ls-files-with-excludes git-status remaining-files 'ignored "-o" "-i"))) - (unless files - (setq remaining-files (git-get-filenames (ewoc-collect git-status #'git-fileinfo->needs-update)))) - (when remaining-files - (setq remaining-files (git-run-ls-files-cached git-status remaining-files 'uptodate))) - (git-set-filenames-state git-status remaining-files nil) - (when mark-files (git-mark-files git-status files)) - (git-refresh-files) - (git-refresh-ewoc-hf git-status))) - -(defun git-mark-files (status files) - "Mark all the specified FILES, and unmark the others." - (let ((file (and files (pop files))) - (node (ewoc-nth status 0))) - (while node - (let ((info (ewoc-data node))) - (if (and file (string-equal (git-fileinfo->name info) file)) - (progn - (unless (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) t) - (setf (git-fileinfo->needs-refresh info) t)) - (setq file (pop files)) - (setq node (ewoc-next status node))) - (when (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) nil) - (setf (git-fileinfo->needs-refresh info) t)) - (if (and file (string-lessp file (git-fileinfo->name info))) - (setq file (pop files)) - (setq node (ewoc-next status node)))))))) - -(defun git-marked-files () - "Return a list of all marked files, or if none a list containing just the file at cursor position." - (unless git-status (error "Not in git-status buffer.")) - (or (ewoc-collect git-status (lambda (info) (git-fileinfo->marked info))) - (list (ewoc-data (ewoc-locate git-status))))) - -(defun git-marked-files-state (&rest states) - "Return a sorted list of marked files that are in the specified states." - (let ((files (git-marked-files)) - result) - (dolist (info files) - (when (memq (git-fileinfo->state info) states) - (push info result))) - (nreverse result))) - -(defun git-refresh-files () - "Refresh all files that need it and clear the needs-refresh flag." - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map - (lambda (info) - (let ((refresh (git-fileinfo->needs-refresh info))) - (setf (git-fileinfo->needs-refresh info) nil) - refresh)) - git-status) - ; move back to goal column - (when goal-column (move-to-column goal-column))) - -(defun git-refresh-ewoc-hf (status) - "Refresh the ewoc header and footer." - (let ((branch (git-symbolic-ref "HEAD")) - (head (if (git-empty-db-p) "Nothing committed yet" - (git-get-commit-description "HEAD"))) - (merge-heads (git-get-merge-heads))) - (ewoc-set-hf status - (format "Directory: %s\nBranch: %s\nHead: %s%s\n" - default-directory - (if branch - (if (string-match "^refs/heads/" branch) - (substring branch (match-end 0)) - branch) - "none (detached HEAD)") - head - (if merge-heads - (concat "\nMerging: " - (mapconcat (lambda (str) (git-get-commit-description str)) merge-heads "\n ")) - "")) - (if (ewoc-nth status 0) "" " No changes.")))) - -(defun git-get-filenames (files) - (mapcar (lambda (info) (git-fileinfo->name info)) files)) - -(defun git-update-index (index-file files) - "Run git-update-index on a list of files." - (let ((process-environment (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) - process-environment)) - added deleted modified) - (dolist (info files) - (case (git-fileinfo->state info) - ('added (push info added)) - ('deleted (push info deleted)) - ('modified (push info modified)))) - (and - (or (not added) (apply #'git-call-process-display-error "update-index" "--add" "--" (git-get-filenames added))) - (or (not deleted) (apply #'git-call-process-display-error "update-index" "--remove" "--" (git-get-filenames deleted))) - (or (not modified) (apply #'git-call-process-display-error "update-index" "--" (git-get-filenames modified)))))) - -(defun git-run-pre-commit-hook () - "Run the pre-commit hook if any." - (unless git-status (error "Not in git-status buffer.")) - (let ((files (git-marked-files-state 'added 'deleted 'modified))) - (or (not files) - (not (file-executable-p ".git/hooks/pre-commit")) - (let ((index-file (make-temp-file "gitidx"))) - (unwind-protect - (let ((head-tree (unless (git-empty-db-p) (git-rev-parse "HEAD^{tree}")))) - (git-read-tree head-tree index-file) - (git-update-index index-file files) - (git-run-hook "pre-commit" `(("GIT_INDEX_FILE" . ,index-file)))) - (delete-file index-file)))))) - -(defun git-do-commit () - "Perform the actual commit using the current buffer as log message." - (interactive) - (let ((buffer (current-buffer)) - (index-file (make-temp-file "gitidx"))) - (with-current-buffer log-edit-parent-buffer - (if (git-marked-files-state 'unmerged) - (message "You cannot commit unmerged files, resolve them first.") - (unwind-protect - (let ((files (git-marked-files-state 'added 'deleted 'modified)) - head tree head-tree) - (unless (git-empty-db-p) - (setq head (git-rev-parse "HEAD") - head-tree (git-rev-parse "HEAD^{tree}"))) - (message "Running git commit...") - (when - (and - (git-read-tree head-tree index-file) - (git-update-index nil files) ;update both the default index - (git-update-index index-file files) ;and the temporary one - (setq tree (git-write-tree index-file))) - (if (or (not (string-equal tree head-tree)) - (yes-or-no-p "The tree was not modified, do you really want to perform an empty commit? ")) - (let ((commit (git-commit-tree buffer tree head))) - (when commit - (condition-case nil (delete-file ".git/MERGE_HEAD") (error nil)) - (condition-case nil (delete-file ".git/MERGE_MSG") (error nil)) - (with-current-buffer buffer (erase-buffer)) - (git-update-status-files (git-get-filenames files)) - (git-call-process nil "rerere") - (git-call-process nil "gc" "--auto") - (message "Committed %s." commit) - (git-run-hook "post-commit" nil))) - (message "Commit aborted.")))) - (delete-file index-file)))))) - - -;;;; Interactive functions -;;;; ------------------------------------------------------------ - -(defun git-mark-file () - "Mark the file that the cursor is on and move to the next one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) t) - (ewoc-invalidate git-status pos) - (ewoc-goto-next git-status 1))) - -(defun git-unmark-file () - "Unmark the file that the cursor is on and move to the next one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) nil) - (ewoc-invalidate git-status pos) - (ewoc-goto-next git-status 1))) - -(defun git-unmark-file-up () - "Unmark the file that the cursor is on and move to the previous one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) nil) - (ewoc-invalidate git-status pos) - (ewoc-goto-prev git-status 1))) - -(defun git-mark-all () - "Mark all files." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (unless (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) t))) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-unmark-all () - "Unmark all files." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (when (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) nil) - t)) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-toggle-all-marks () - "Toggle all file marks." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (setf (git-fileinfo->marked info) (not (git-fileinfo->marked info))) t) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-next-file (&optional n) - "Move the selection down N files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (ewoc-goto-next git-status n)) - -(defun git-prev-file (&optional n) - "Move the selection up N files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (ewoc-goto-prev git-status n)) - -(defun git-next-unmerged-file (&optional n) - "Move the selection down N unmerged files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (let* ((last (ewoc-locate git-status)) - (node (ewoc-next git-status last))) - (while (and node (> n 0)) - (when (eq 'unmerged (git-fileinfo->state (ewoc-data node))) - (setq n (1- n)) - (setq last node)) - (setq node (ewoc-next git-status node))) - (ewoc-goto-node git-status last))) - -(defun git-prev-unmerged-file (&optional n) - "Move the selection up N unmerged files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (let* ((last (ewoc-locate git-status)) - (node (ewoc-prev git-status last))) - (while (and node (> n 0)) - (when (eq 'unmerged (git-fileinfo->state (ewoc-data node))) - (setq n (1- n)) - (setq last node)) - (setq node (ewoc-prev git-status node))) - (ewoc-goto-node git-status last))) - -(defun git-insert-file (file) - "Insert file(s) into the git-status buffer." - (interactive "fInsert file: ") - (git-update-status-files (list (file-relative-name file)))) - -(defun git-add-file () - "Add marked file(s) to the index cache." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'unknown 'ignored 'unmerged)))) - ;; FIXME: add support for directories - (unless files - (push (file-relative-name (read-file-name "File to add: " nil nil t)) files)) - (when (apply 'git-call-process-display-error "update-index" "--add" "--" files) - (git-update-status-files files) - (git-success-message "Added" files)))) - -(defun git-ignore-file () - "Add marked file(s) to the ignore list." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'unknown)))) - (unless files - (push (file-relative-name (read-file-name "File to ignore: " nil nil t)) files)) - (dolist (f files) (git-append-to-ignore f)) - (git-update-status-files files) - (git-success-message "Ignored" files))) - -(defun git-remove-file () - "Remove the marked file(s)." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'added 'modified 'unknown 'uptodate 'ignored)))) - (unless files - (push (file-relative-name (read-file-name "File to remove: " nil nil t)) files)) - (if (yes-or-no-p - (if (cdr files) - (format "Remove %d files? " (length files)) - (format "Remove %s? " (car files)))) - (progn - (dolist (name files) - (ignore-errors - (if (file-directory-p name) - (delete-directory name) - (delete-file name)))) - (when (apply 'git-call-process-display-error "update-index" "--remove" "--" files) - (git-update-status-files files) - (git-success-message "Removed" files))) - (message "Aborting")))) - -(defun git-revert-file () - "Revert changes to the marked file(s)." - (interactive) - (let ((files (git-marked-files-state 'added 'deleted 'modified 'unmerged)) - added modified) - (when (and files - (yes-or-no-p - (if (cdr files) - (format "Revert %d files? " (length files)) - (format "Revert %s? " (git-fileinfo->name (car files)))))) - (dolist (info files) - (case (git-fileinfo->state info) - ('added (push (git-fileinfo->name info) added)) - ('deleted (push (git-fileinfo->name info) modified)) - ('unmerged (push (git-fileinfo->name info) modified)) - ('modified (push (git-fileinfo->name info) modified)))) - ;; check if a buffer contains one of the files and isn't saved - (dolist (file modified) - (let ((buffer (get-file-buffer file))) - (when (and buffer (buffer-modified-p buffer)) - (error "Buffer %s is modified. Please kill or save modified buffers before reverting." (buffer-name buffer))))) - (let ((ok (and - (or (not added) - (apply 'git-call-process-display-error "update-index" "--force-remove" "--" added)) - (or (not modified) - (apply 'git-call-process-display-error "checkout" "HEAD" modified)))) - (names (git-get-filenames files))) - (git-update-status-files names) - (when ok - (dolist (file modified) - (let ((buffer (get-file-buffer file))) - (when buffer (with-current-buffer buffer (revert-buffer t t t))))) - (git-success-message "Reverted" names)))))) - -(defun git-remove-handled () - "Remove handled files from the status list." - (interactive) - (ewoc-filter git-status - (lambda (info) - (case (git-fileinfo->state info) - ('ignored git-show-ignored) - ('uptodate git-show-uptodate) - ('unknown git-show-unknown) - (t t)))) - (unless (ewoc-nth git-status 0) ; refresh header if list is empty - (git-refresh-ewoc-hf git-status))) - -(defun git-toggle-show-uptodate () - "Toogle the option for showing up-to-date files." - (interactive) - (if (setq git-show-uptodate (not git-show-uptodate)) - (git-refresh-status) - (git-remove-handled))) - -(defun git-toggle-show-ignored () - "Toogle the option for showing ignored files." - (interactive) - (if (setq git-show-ignored (not git-show-ignored)) - (progn - (message "Inserting ignored files...") - (git-run-ls-files-with-excludes git-status nil 'ignored "-o" "-i") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - (message "Inserting ignored files...done")) - (git-remove-handled))) - -(defun git-toggle-show-unknown () - "Toogle the option for showing unknown files." - (interactive) - (if (setq git-show-unknown (not git-show-unknown)) - (progn - (message "Inserting unknown files...") - (git-run-ls-files-with-excludes git-status nil 'unknown "-o") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - (message "Inserting unknown files...done")) - (git-remove-handled))) - -(defun git-expand-directory (info) - "Expand the directory represented by INFO to list its files." - (when (eq (lsh (git-fileinfo->new-perm info) -9) ?\110) - (let ((dir (git-fileinfo->name info))) - (git-set-filenames-state git-status (list dir) nil) - (git-run-ls-files-with-excludes git-status (list (concat dir "/")) 'unknown "-o") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - t))) - -(defun git-setup-diff-buffer (buffer) - "Setup a buffer for displaying a diff." - (let ((dir default-directory)) - (with-current-buffer buffer - (diff-mode) - (goto-char (point-min)) - (setq default-directory dir) - (setq buffer-read-only t))) - (display-buffer buffer) - ; shrink window only if it displays the status buffer - (when (eq (window-buffer) (current-buffer)) - (shrink-window-if-larger-than-buffer))) - -(defun git-diff-file () - "Diff the marked file(s) against HEAD." - (interactive) - (let ((files (git-marked-files))) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-index" "-p" "-M" "HEAD" "--" (git-get-filenames files))))) - -(defun git-diff-file-merge-head (arg) - "Diff the marked file(s) against the first merge head (or the nth one with a numeric prefix)." - (interactive "p") - (let ((files (git-marked-files)) - (merge-heads (git-get-merge-heads))) - (unless merge-heads (error "No merge in progress")) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-index" "-p" "-M" - (or (nth (1- arg) merge-heads) "HEAD") "--" (git-get-filenames files))))) - -(defun git-diff-unmerged-file (stage) - "Diff the marked unmerged file(s) against the specified stage." - (let ((files (git-marked-files))) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-files" "-p" stage "--" (git-get-filenames files))))) - -(defun git-diff-file-base () - "Diff the marked unmerged file(s) against the common base file." - (interactive) - (git-diff-unmerged-file "-1")) - -(defun git-diff-file-mine () - "Diff the marked unmerged file(s) against my pre-merge version." - (interactive) - (git-diff-unmerged-file "-2")) - -(defun git-diff-file-other () - "Diff the marked unmerged file(s) against the other's pre-merge version." - (interactive) - (git-diff-unmerged-file "-3")) - -(defun git-diff-file-combined () - "Do a combined diff of the marked unmerged file(s)." - (interactive) - (git-diff-unmerged-file "-c")) - -(defun git-diff-file-idiff () - "Perform an interactive diff on the current file." - (interactive) - (let ((files (git-marked-files-state 'added 'deleted 'modified))) - (unless (eq 1 (length files)) - (error "Cannot perform an interactive diff on multiple files.")) - (let* ((filename (car (git-get-filenames files))) - (buff1 (find-file-noselect filename)) - (buff2 (git-run-command-buffer (concat filename ".~HEAD~") "cat-file" "blob" (concat "HEAD:" filename)))) - (ediff-buffers buff1 buff2)))) - -(defun git-log-file () - "Display a log of changes to the marked file(s)." - (interactive) - (let* ((files (git-marked-files)) - (coding-system-for-read git-commits-coding-system) - (buffer (apply #'git-run-command-buffer "*git-log*" "rev-list" "--pretty" "HEAD" "--" (git-get-filenames files)))) - (with-current-buffer buffer - ; (git-log-mode) FIXME: implement log mode - (goto-char (point-min)) - (setq buffer-read-only t)) - (display-buffer buffer))) - -(defun git-log-edit-files () - "Return a list of marked files for use in the log-edit buffer." - (with-current-buffer log-edit-parent-buffer - (git-get-filenames (git-marked-files-state 'added 'deleted 'modified)))) - -(defun git-log-edit-diff () - "Run a diff of the current files being committed from a log-edit buffer." - (with-current-buffer log-edit-parent-buffer - (git-diff-file))) - -(defun git-append-sign-off (name email) - "Append a Signed-off-by entry to the current buffer, avoiding duplicates." - (let ((sign-off (format "Signed-off-by: %s <%s>" name email)) - (case-fold-search t)) - (goto-char (point-min)) - (unless (re-search-forward (concat "^" (regexp-quote sign-off)) nil t) - (goto-char (point-min)) - (unless (re-search-forward "^Signed-off-by: " nil t) - (setq sign-off (concat "\n" sign-off))) - (goto-char (point-max)) - (insert sign-off "\n")))) - -(defun git-setup-log-buffer (buffer &optional merge-heads author-name author-email subject date msg) - "Setup the log buffer for a commit." - (unless git-status (error "Not in git-status buffer.")) - (let ((dir default-directory) - (committer-name (git-get-committer-name)) - (committer-email (git-get-committer-email)) - (sign-off git-append-signed-off-by)) - (with-current-buffer buffer - (cd dir) - (erase-buffer) - (insert - (propertize - (format "Author: %s <%s>\n%s%s" - (or author-name committer-name) - (or author-email committer-email) - (if date (format "Date: %s\n" date) "") - (if merge-heads - (format "Merge: %s\n" - (mapconcat 'identity merge-heads " ")) - "")) - 'face 'git-header-face) - (propertize git-log-msg-separator 'face 'git-separator-face) - "\n") - (when subject (insert subject "\n\n")) - (cond (msg (insert msg "\n")) - ((file-readable-p ".git/rebase-apply/msg") - (insert-file-contents ".git/rebase-apply/msg")) - ((file-readable-p ".git/MERGE_MSG") - (insert-file-contents ".git/MERGE_MSG"))) - ; delete empty lines at end - (goto-char (point-min)) - (when (re-search-forward "\n+\\'" nil t) - (replace-match "\n" t t)) - (when sign-off (git-append-sign-off committer-name committer-email))) - buffer)) - -(define-derived-mode git-log-edit-mode log-edit-mode "Git-Log-Edit" - "Major mode for editing git log messages. - -Set up git-specific `font-lock-keywords' for `log-edit-mode'." - (set (make-local-variable 'font-lock-defaults) - '(git-log-edit-font-lock-keywords t t))) - -(defun git-commit-file () - "Commit the marked file(s), asking for a commit message." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (when (git-run-pre-commit-hook) - (let ((buffer (get-buffer-create "*git-commit*")) - (coding-system (git-get-commits-coding-system)) - author-name author-email subject date) - (when (eq 0 (buffer-size buffer)) - (when (file-readable-p ".git/rebase-apply/info") - (with-temp-buffer - (insert-file-contents ".git/rebase-apply/info") - (goto-char (point-min)) - (when (re-search-forward "^Author: \\(.*\\)\nEmail: \\(.*\\)$" nil t) - (setq author-name (match-string 1)) - (setq author-email (match-string 2))) - (goto-char (point-min)) - (when (re-search-forward "^Subject: \\(.*\\)$" nil t) - (setq subject (match-string 1))) - (goto-char (point-min)) - (when (re-search-forward "^Date: \\(.*\\)$" nil t) - (setq date (match-string 1))))) - (git-setup-log-buffer buffer (git-get-merge-heads) author-name author-email subject date)) - (if (boundp 'log-edit-diff-function) - (log-edit 'git-do-commit nil '((log-edit-listfun . git-log-edit-files) - (log-edit-diff-function . git-log-edit-diff)) buffer 'git-log-edit-mode) - (log-edit 'git-do-commit nil 'git-log-edit-files buffer - 'git-log-edit-mode)) - (setq paragraph-separate (concat (regexp-quote git-log-msg-separator) "$\\|Author: \\|Date: \\|Merge: \\|Signed-off-by: \\|\f\\|[ ]*$")) - (setq buffer-file-coding-system coding-system) - (re-search-forward (regexp-quote (concat git-log-msg-separator "\n")) nil t)))) - -(defun git-setup-commit-buffer (commit) - "Setup the commit buffer with the contents of COMMIT." - (let (parents author-name author-email subject date msg) - (with-temp-buffer - (let ((coding-system (git-get-logoutput-coding-system))) - (git-call-process t "log" "-1" "--pretty=medium" "--abbrev=40" commit) - (goto-char (point-min)) - (when (re-search-forward "^Merge: *\\(.*\\)$" nil t) - (setq parents (cdr (split-string (match-string 1) " +")))) - (when (re-search-forward "^Author: *\\(.*\\) <\\(.*\\)>$" nil t) - (setq author-name (match-string 1)) - (setq author-email (match-string 2))) - (when (re-search-forward "^Date: *\\(.*\\)$" nil t) - (setq date (match-string 1))) - (while (re-search-forward "^ \\(.*\\)$" nil t) - (push (match-string 1) msg)) - (setq msg (nreverse msg)) - (setq subject (pop msg)) - (while (and msg (zerop (length (car msg))) (pop msg))))) - (git-setup-log-buffer (get-buffer-create "*git-commit*") - parents author-name author-email subject date - (mapconcat #'identity msg "\n")))) - -(defun git-get-commit-files (commit) - "Retrieve a sorted list of files modified by COMMIT." - (let (files) - (with-temp-buffer - (git-call-process t "diff-tree" "-m" "-r" "-z" "--name-only" "--no-commit-id" "--root" commit) - (goto-char (point-min)) - (while (re-search-forward "\\([^\0]*\\)\0" nil t 1) - (push (match-string 1) files))) - (sort files #'string-lessp))) - -(defun git-read-commit-name (prompt &optional default) - "Ask for a commit name, with completion for local branch, remote branch and tag." - (completing-read prompt - (list* "HEAD" "ORIG_HEAD" "FETCH_HEAD" (mapcar #'car (git-for-each-ref))) - nil nil nil nil default)) - -(defun git-checkout (branch &optional merge) - "Checkout a branch, tag, or any commit. -Use a prefix arg if git should merge while checking out." - (interactive - (list (git-read-commit-name "Checkout: ") - current-prefix-arg)) - (unless git-status (error "Not in git-status buffer.")) - (let ((args (list branch "--"))) - (when merge (push "-m" args)) - (when (apply #'git-call-process-display-error "checkout" args) - (git-update-status-files)))) - -(defun git-branch (branch) - "Create a branch from the current HEAD and switch to it." - (interactive (list (git-read-commit-name "Branch: "))) - (unless git-status (error "Not in git-status buffer.")) - (if (git-rev-parse (concat "refs/heads/" branch)) - (if (yes-or-no-p (format "Branch %s already exists, replace it? " branch)) - (and (git-call-process-display-error "branch" "-f" branch) - (git-call-process-display-error "checkout" branch)) - (message "Canceled.")) - (git-call-process-display-error "checkout" "-b" branch)) - (git-refresh-ewoc-hf git-status)) - -(defun git-amend-commit () - "Undo the last commit on HEAD, and set things up to commit an -amended version of it." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (when (git-empty-db-p) (error "No commit to amend.")) - (let* ((commit (git-rev-parse "HEAD")) - (files (git-get-commit-files commit))) - (when (if (git-rev-parse "HEAD^") - (git-call-process-display-error "reset" "--soft" "HEAD^") - (and (git-update-ref "ORIG_HEAD" commit) - (git-update-ref "HEAD" nil commit))) - (git-update-status-files files t) - (git-setup-commit-buffer commit) - (git-commit-file)))) - -(defun git-cherry-pick-commit (arg) - "Cherry-pick a commit." - (interactive (list (git-read-commit-name "Cherry-pick commit: "))) - (unless git-status (error "Not in git-status buffer.")) - (let ((commit (git-rev-parse (concat arg "^0")))) - (unless commit (error "Not a valid commit '%s'." arg)) - (when (git-rev-parse (concat commit "^2")) - (error "Cannot cherry-pick a merge commit.")) - (let ((files (git-get-commit-files commit)) - (ok (git-call-process-display-error "cherry-pick" "-n" commit))) - (git-update-status-files files ok) - (with-current-buffer (git-setup-commit-buffer commit) - (goto-char (point-min)) - (if (re-search-forward "^\n*Signed-off-by:" nil t 1) - (goto-char (match-beginning 0)) - (goto-char (point-max))) - (insert "(cherry picked from commit " commit ")\n")) - (when ok (git-commit-file))))) - -(defun git-revert-commit (arg) - "Revert a commit." - (interactive (list (git-read-commit-name "Revert commit: "))) - (unless git-status (error "Not in git-status buffer.")) - (let ((commit (git-rev-parse (concat arg "^0")))) - (unless commit (error "Not a valid commit '%s'." arg)) - (when (git-rev-parse (concat commit "^2")) - (error "Cannot revert a merge commit.")) - (let ((files (git-get-commit-files commit)) - (subject (git-get-commit-description commit)) - (ok (git-call-process-display-error "revert" "-n" commit))) - (git-update-status-files files ok) - (when (string-match "^[0-9a-f]+ - \\(.*\\)$" subject) - (setq subject (match-string 1 subject))) - (git-setup-log-buffer (get-buffer-create "*git-commit*") - (git-get-merge-heads) nil nil (format "Revert \"%s\"" subject) nil - (format "This reverts commit %s.\n" commit)) - (when ok (git-commit-file))))) - -(defun git-find-file () - "Visit the current file in its own buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (unless (git-expand-directory info) - (find-file (git-fileinfo->name info)) - (when (eq 'unmerged (git-fileinfo->state info)) - (smerge-mode 1))))) - -(defun git-find-file-other-window () - "Visit the current file in its own buffer in another window." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (find-file-other-window (git-fileinfo->name info)) - (when (eq 'unmerged (git-fileinfo->state info)) - (smerge-mode)))) - -(defun git-find-file-imerge () - "Visit the current file in interactive merge mode." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (find-file (git-fileinfo->name info)) - (smerge-ediff))) - -(defun git-view-file () - "View the current file in its own buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (view-file (git-fileinfo->name info)))) - -(defun git-refresh-status () - "Refresh the git status buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (message "Refreshing git status...") - (git-update-status-files) - (message "Refreshing git status...done")) - -(defun git-status-quit () - "Quit git-status mode." - (interactive) - (bury-buffer)) - -;;;; Major Mode -;;;; ------------------------------------------------------------ - -(defvar git-status-mode-hook nil - "Run after `git-status-mode' is setup.") - -(defvar git-status-mode-map nil - "Keymap for git major mode.") - -(defvar git-status nil - "List of all files managed by the git-status mode.") - -(unless git-status-mode-map - (let ((map (make-keymap)) - (commit-map (make-sparse-keymap)) - (diff-map (make-sparse-keymap)) - (toggle-map (make-sparse-keymap))) - (suppress-keymap map) - (define-key map "?" 'git-help) - (define-key map "h" 'git-help) - (define-key map " " 'git-next-file) - (define-key map "a" 'git-add-file) - (define-key map "c" 'git-commit-file) - (define-key map "\C-c" commit-map) - (define-key map "d" diff-map) - (define-key map "=" 'git-diff-file) - (define-key map "f" 'git-find-file) - (define-key map "\r" 'git-find-file) - (define-key map "g" 'git-refresh-status) - (define-key map "i" 'git-ignore-file) - (define-key map "I" 'git-insert-file) - (define-key map "l" 'git-log-file) - (define-key map "m" 'git-mark-file) - (define-key map "M" 'git-mark-all) - (define-key map "n" 'git-next-file) - (define-key map "N" 'git-next-unmerged-file) - (define-key map "o" 'git-find-file-other-window) - (define-key map "p" 'git-prev-file) - (define-key map "P" 'git-prev-unmerged-file) - (define-key map "q" 'git-status-quit) - (define-key map "r" 'git-remove-file) - (define-key map "t" toggle-map) - (define-key map "T" 'git-toggle-all-marks) - (define-key map "u" 'git-unmark-file) - (define-key map "U" 'git-revert-file) - (define-key map "v" 'git-view-file) - (define-key map "x" 'git-remove-handled) - (define-key map "\C-?" 'git-unmark-file-up) - (define-key map "\M-\C-?" 'git-unmark-all) - ; the commit submap - (define-key commit-map "\C-a" 'git-amend-commit) - (define-key commit-map "\C-b" 'git-branch) - (define-key commit-map "\C-o" 'git-checkout) - (define-key commit-map "\C-p" 'git-cherry-pick-commit) - (define-key commit-map "\C-v" 'git-revert-commit) - ; the diff submap - (define-key diff-map "b" 'git-diff-file-base) - (define-key diff-map "c" 'git-diff-file-combined) - (define-key diff-map "=" 'git-diff-file) - (define-key diff-map "e" 'git-diff-file-idiff) - (define-key diff-map "E" 'git-find-file-imerge) - (define-key diff-map "h" 'git-diff-file-merge-head) - (define-key diff-map "m" 'git-diff-file-mine) - (define-key diff-map "o" 'git-diff-file-other) - ; the toggle submap - (define-key toggle-map "u" 'git-toggle-show-uptodate) - (define-key toggle-map "i" 'git-toggle-show-ignored) - (define-key toggle-map "k" 'git-toggle-show-unknown) - (define-key toggle-map "m" 'git-toggle-all-marks) - (setq git-status-mode-map map)) - (easy-menu-define git-menu git-status-mode-map - "Git Menu" - `("Git" - ["Refresh" git-refresh-status t] - ["Commit" git-commit-file t] - ["Checkout..." git-checkout t] - ["New Branch..." git-branch t] - ["Cherry-pick Commit..." git-cherry-pick-commit t] - ["Revert Commit..." git-revert-commit t] - ("Merge" - ["Next Unmerged File" git-next-unmerged-file t] - ["Prev Unmerged File" git-prev-unmerged-file t] - ["Interactive Merge File" git-find-file-imerge t] - ["Diff Against Common Base File" git-diff-file-base t] - ["Diff Combined" git-diff-file-combined t] - ["Diff Against Merge Head" git-diff-file-merge-head t] - ["Diff Against Mine" git-diff-file-mine t] - ["Diff Against Other" git-diff-file-other t]) - "--------" - ["Add File" git-add-file t] - ["Revert File" git-revert-file t] - ["Ignore File" git-ignore-file t] - ["Remove File" git-remove-file t] - ["Insert File" git-insert-file t] - "--------" - ["Find File" git-find-file t] - ["View File" git-view-file t] - ["Diff File" git-diff-file t] - ["Interactive Diff File" git-diff-file-idiff t] - ["Log" git-log-file t] - "--------" - ["Mark" git-mark-file t] - ["Mark All" git-mark-all t] - ["Unmark" git-unmark-file t] - ["Unmark All" git-unmark-all t] - ["Toggle All Marks" git-toggle-all-marks t] - ["Hide Handled Files" git-remove-handled t] - "--------" - ["Show Uptodate Files" git-toggle-show-uptodate :style toggle :selected git-show-uptodate] - ["Show Ignored Files" git-toggle-show-ignored :style toggle :selected git-show-ignored] - ["Show Unknown Files" git-toggle-show-unknown :style toggle :selected git-show-unknown] - "--------" - ["Quit" git-status-quit t]))) - - -;; git mode should only run in the *git status* buffer -(put 'git-status-mode 'mode-class 'special) - -(defun git-status-mode () - "Major mode for interacting with Git. -Commands: -\\{git-status-mode-map}" - (kill-all-local-variables) - (buffer-disable-undo) - (setq mode-name "git status" - major-mode 'git-status-mode - goal-column 17 - buffer-read-only t) - (use-local-map git-status-mode-map) - (let ((buffer-read-only nil)) - (erase-buffer) - (let ((status (ewoc-create 'git-fileinfo-prettyprint "" ""))) - (set (make-local-variable 'git-status) status)) - (set (make-local-variable 'list-buffers-directory) default-directory) - (make-local-variable 'git-show-uptodate) - (make-local-variable 'git-show-ignored) - (make-local-variable 'git-show-unknown) - (run-hooks 'git-status-mode-hook))) - -(defun git-find-status-buffer (dir) - "Find the git status buffer handling a specified directory." - (let ((list (buffer-list)) - (fulldir (expand-file-name dir)) - found) - (while (and list (not found)) - (let ((buffer (car list))) - (with-current-buffer buffer - (when (and list-buffers-directory - (string-equal fulldir (expand-file-name list-buffers-directory)) - (eq major-mode 'git-status-mode)) - (setq found buffer)))) - (setq list (cdr list))) - found)) - -(defun git-status (dir) - "Entry point into git-status mode." - (interactive "DSelect directory: ") - (setq dir (git-get-top-dir dir)) - (if (file-exists-p (concat (file-name-as-directory dir) ".git")) - (let ((buffer (or (and git-reuse-status-buffer (git-find-status-buffer dir)) - (create-file-buffer (expand-file-name "*git-status*" dir))))) - (switch-to-buffer buffer) - (cd dir) - (git-status-mode) - (git-refresh-status) - (goto-char (point-min)) - (add-hook 'after-save-hook 'git-update-saved-file)) - (message "%s is not a git working tree." dir))) - -(defun git-update-saved-file () - "Update the corresponding git-status buffer when a file is saved. -Meant to be used in `after-save-hook'." - (let* ((file (expand-file-name buffer-file-name)) - (dir (condition-case nil (git-get-top-dir (file-name-directory file)) (error nil))) - (buffer (and dir (git-find-status-buffer dir)))) - (when buffer - (with-current-buffer buffer - (let ((filename (file-relative-name file dir))) - ; skip files located inside the .git directory - (unless (string-match "^\\.git/" filename) - (git-call-process nil "add" "--refresh" "--" filename) - (git-update-status-files (list filename)))))))) - -(defun git-help () - "Display help for Git mode." - (interactive) - (describe-function 'git-status-mode)) - -(provide 'git) -;;; git.el ends here -- 2.15.1.424.g9478a66081 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH] git{,-blame}.el: remove old bitrotting Emacs code 2018-03-08 9:45 ` [PATCH] git{,-blame}.el: remove old bitrotting Emacs code Ævar Arnfjörð Bjarmason @ 2018-03-08 17:27 ` Junio C Hamano 2018-03-10 12:30 ` [PATCH v2] " Ævar Arnfjörð Bjarmason 2018-03-08 17:55 ` [PATCH] " Kyle Meyer 1 sibling, 1 reply; 26+ messages in thread From: Junio C Hamano @ 2018-03-08 17:27 UTC (permalink / raw) To: Ævar Arnfjörð Bjarmason Cc: git, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal Ævar Arnfjörð Bjarmason <avarab@gmail.com> writes: > On Tue, Mar 06 2018, Alexandre Julliard jotted: > ... >> I'd recommend that anybody still using it switch to Magit, which is >> being actively maintained, and IMO superior to git.el in all respects. > > I think at this point it's best to remove both of these modes from > being distributed with Git, per this patch. > > contrib/emacs/.gitignore | 1 - > contrib/emacs/Makefile | 21 - > contrib/emacs/README | 39 - > contrib/emacs/git-blame.el | 483 ------------- > contrib/emacs/git.el | 1704 -------------------------------------------- > 5 files changed, 2248 deletions(-) > delete mode 100644 contrib/emacs/.gitignore > delete mode 100644 contrib/emacs/Makefile > delete mode 100644 contrib/emacs/README > delete mode 100644 contrib/emacs/git-blame.el > delete mode 100644 contrib/emacs/git.el I agree with the overall direction. The only difference between this and what I had in mind was if we want to leave README that says what you said in the log message. That way, those who just got a new version of tarball and then wonder what happened to these scripts would save one trip to the Internet. ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v2] git{,-blame}.el: remove old bitrotting Emacs code 2018-03-08 17:27 ` Junio C Hamano @ 2018-03-10 12:30 ` Ævar Arnfjörð Bjarmason 2018-03-10 16:50 ` Martin Ågren 0 siblings, 1 reply; 26+ messages in thread From: Ævar Arnfjörð Bjarmason @ 2018-03-10 12:30 UTC (permalink / raw) To: git Cc: Junio C Hamano, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal, Ævar Arnfjörð Bjarmason The git-blame.el mode has been superseded by Emacs's own vc-annotate (invoked by C-x v g). Users of the git.el mode are now much better off using either Magit or the Git backend for Emacs's own VC mode. These modes were added over 10 years ago when Emacs's own Git support was much less mature, and there weren't other mature modes in the wild or shipped with Emacs itself. These days these modes have very few if users, and users of git aren't well served by us shipping these (some OS's install them alongside git by default, which is confusing and leads users astray). So let's remove these per Alexandre Julliard's message to the ML[1]. If someone still wants these for some reason they're better served by hosting these elsewhere (e.g. on ELPA), instead of us distributing them with git. 1. "Re: [PATCH] git.el: handle default excludesfile properly" (87muzlwhb0.fsf@winehq.org) -- https://public-inbox.org/git/87muzlwhb0.fsf@winehq.org/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> --- On Thu, Mar 08 2018, Junio C. Hamano jotted: > I agree with the overall direction. The only difference between > this and what I had in mind was if we want to leave README that says > what you said in the log message. That way, those who just got a > new version of tarball and then wonder what happened to these > scripts would save one trip to the Internet. Here's a version where I amend the contrib/emacs/README to say that we used to have some code here, but no longer do, with a brief overview of the dead code and replacements for its functionality. Hopefully that's more informative than just copy/pasting what I had in the commit message. contrib/emacs/.gitignore | 1 - contrib/emacs/Makefile | 21 - contrib/emacs/README | 32 +- contrib/emacs/git-blame.el | 483 ------------- contrib/emacs/git.el | 1704 -------------------------------------------- 5 files changed, 13 insertions(+), 2228 deletions(-) delete mode 100644 contrib/emacs/.gitignore delete mode 100644 contrib/emacs/Makefile delete mode 100644 contrib/emacs/git-blame.el delete mode 100644 contrib/emacs/git.el diff --git a/contrib/emacs/.gitignore b/contrib/emacs/.gitignore deleted file mode 100644 index c531d9867f..0000000000 --- a/contrib/emacs/.gitignore +++ /dev/null @@ -1 +0,0 @@ -*.elc diff --git a/contrib/emacs/Makefile b/contrib/emacs/Makefile deleted file mode 100644 index 24d9312941..0000000000 --- a/contrib/emacs/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -## Build and install stuff - -EMACS = emacs - -ELC = git.elc git-blame.elc -INSTALL ?= install -INSTALL_ELC = $(INSTALL) -m 644 -prefix ?= $(HOME) -emacsdir = $(prefix)/share/emacs/site-lisp -RM ?= rm -f - -all: $(ELC) - -install: all - $(INSTALL) -d $(DESTDIR)$(emacsdir) - $(INSTALL_ELC) $(ELC:.elc=.el) $(ELC) $(DESTDIR)$(emacsdir) - -%.elc: %.el - $(EMACS) -batch -f batch-byte-compile $< - -clean:; $(RM) $(ELC) diff --git a/contrib/emacs/README b/contrib/emacs/README index 82368bdbff..5a63109458 100644 --- a/contrib/emacs/README +++ b/contrib/emacs/README @@ -1,30 +1,24 @@ -This directory contains various modules for Emacs support. +This directory used to contain various modules for Emacs support. -To make the modules available to Emacs, you should add this directory -to your load-path, and then require the modules you want. This can be -done by adding to your .emacs something like this: +These were added shortly after Git was first released, since then +Emacs's own support for Git got better than what was offered by these +modules, or was superseded by popular 3rd-party Git modes such as +Magit. - (add-to-list 'load-path ".../git/contrib/emacs") - (require 'git) - (require 'git-blame) - - -The following modules are available: +The following modules were available, and can be dug up from the Git +history: * git.el: - Status manager that displays the state of all the files of the - project, and provides easy access to the most frequently used git - commands. The user interface is as far as possible compatible with - the pcl-cvs mode. It can be started with `M-x git-status'. + Wrapper for "git status" that provided access to other git commands. + + Modern alternatives to this are Magit, or the VC mode that ships + with Emacs. * git-blame.el: - Emacs implementation of incremental git-blame. When you turn it on - while viewing a file, the editor buffer will be updated by setting - the background of individual lines to a color that reflects which - commit it comes from. And when you move around the buffer, a - one-line summary will be shown in the echo area. + A wrapper for "git blame" written before Emacs's own vc-annotate + mode learned to invoke git-blame, which can be done via C-x v g. * vc-git.el: diff --git a/contrib/emacs/git-blame.el b/contrib/emacs/git-blame.el deleted file mode 100644 index 510e0f7103..0000000000 --- a/contrib/emacs/git-blame.el +++ /dev/null @@ -1,483 +0,0 @@ -;;; git-blame.el --- Minor mode for incremental blame for Git -*- coding: utf-8 -*- -;; -;; Copyright (C) 2007 David Kågedal -;; -;; Authors: David Kågedal <davidk@lysator.liu.se> -;; Created: 31 Jan 2007 -;; Message-ID: <87iren2vqx.fsf@morpheus.local> -;; License: GPL -;; Keywords: git, version control, release management -;; -;; Compatibility: Emacs21, Emacs22 and EmacsCVS -;; Git 1.5 and up - -;; This file is *NOT* part of GNU Emacs. -;; This file is distributed under the same terms as GNU Emacs. - -;; This program is free software; you can redistribute it and/or -;; modify it under the terms of the GNU General Public License as -;; published by the Free Software Foundation; either version 2 of -;; the License, or (at your option) any later version. - -;; This program is distributed in the hope that it will be -;; useful, but WITHOUT ANY WARRANTY; without even the implied -;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR -;; PURPOSE. See the GNU General Public License for more details. - -;; You should have received a copy of the GNU General Public -;; License along with this program; if not, see -;; <http://www.gnu.org/licenses/>. - -;; http://www.fsf.org/copyleft/gpl.html - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;;; Commentary: -;; -;; Here is an Emacs implementation of incremental git-blame. When you -;; turn it on while viewing a file, the editor buffer will be updated by -;; setting the background of individual lines to a color that reflects -;; which commit it comes from. And when you move around the buffer, a -;; one-line summary will be shown in the echo area. - -;;; Installation: -;; -;; To use this package, put it somewhere in `load-path' (or add -;; directory with git-blame.el to `load-path'), and add the following -;; line to your .emacs: -;; -;; (require 'git-blame) -;; -;; If you do not want to load this package before it is necessary, you -;; can make use of the `autoload' feature, e.g. by adding to your .emacs -;; the following lines -;; -;; (autoload 'git-blame-mode "git-blame" -;; "Minor mode for incremental blame for Git." t) -;; -;; Then first use of `M-x git-blame-mode' would load the package. - -;;; Compatibility: -;; -;; It requires GNU Emacs 21 or later and Git 1.5.0 and up -;; -;; If you'are using Emacs 20, try changing this: -;; -;; (overlay-put ovl 'face (list :background -;; (cdr (assq 'color (cddddr info))))) -;; -;; to -;; -;; (overlay-put ovl 'face (cons 'background-color -;; (cdr (assq 'color (cddddr info))))) - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;;; Code: - -(eval-when-compile (require 'cl)) ; to use `push', `pop' -(require 'format-spec) - -(defface git-blame-prefix-face - '((((background dark)) (:foreground "gray" - :background "black")) - (((background light)) (:foreground "gray" - :background "white")) - (t (:weight bold))) - "The face used for the hash prefix." - :group 'git-blame) - -(defgroup git-blame nil - "A minor mode showing Git blame information." - :group 'git - :link '(function-link git-blame-mode)) - - -(defcustom git-blame-use-colors t - "Use colors to indicate commits in `git-blame-mode'." - :type 'boolean - :group 'git-blame) - -(defcustom git-blame-prefix-format - "%h %20A:" - "The format of the prefix added to each line in `git-blame' -mode. The format is passed to `format-spec' with the following format keys: - - %h - the abbreviated hash - %H - the full hash - %a - the author name - %A - the author email - %c - the committer name - %C - the committer email - %s - the commit summary -" - :group 'git-blame) - -(defcustom git-blame-mouseover-format - "%h %a %A: %s" - "The format of the description shown when pointing at a line in -`git-blame' mode. The format string is passed to `format-spec' -with the following format keys: - - %h - the abbreviated hash - %H - the full hash - %a - the author name - %A - the author email - %c - the committer name - %C - the committer email - %s - the commit summary -" - :group 'git-blame) - - -(defun git-blame-color-scale (&rest elements) - "Given a list, returns a list of triples formed with each -elements of the list. - -a b => bbb bba bab baa abb aba aaa aab" - (let (result) - (dolist (a elements) - (dolist (b elements) - (dolist (c elements) - (setq result (cons (format "#%s%s%s" a b c) result))))) - result)) - -;; (git-blame-color-scale "0c" "04" "24" "1c" "2c" "34" "14" "3c") => -;; ("#3c3c3c" "#3c3c14" "#3c3c34" "#3c3c2c" "#3c3c1c" "#3c3c24" -;; "#3c3c04" "#3c3c0c" "#3c143c" "#3c1414" "#3c1434" "#3c142c" ...) - -(defmacro git-blame-random-pop (l) - "Select a random element from L and returns it. Also remove -selected element from l." - ;; only works on lists with unique elements - `(let ((e (elt ,l (random (length ,l))))) - (setq ,l (remove e ,l)) - e)) - -(defvar git-blame-log-oneline-format - "format:[%cr] %cn: %s" - "*Formatting option used for describing current line in the minibuffer. - -This option is used to pass to git log --pretty= command-line option, -and describe which commit the current line was made.") - -(defvar git-blame-dark-colors - (git-blame-color-scale "0c" "04" "24" "1c" "2c" "34" "14" "3c") - "*List of colors (format #RGB) to use in a dark environment. - -To check out the list, evaluate (list-colors-display git-blame-dark-colors).") - -(defvar git-blame-light-colors - (git-blame-color-scale "c4" "d4" "cc" "dc" "f4" "e4" "fc" "ec") - "*List of colors (format #RGB) to use in a light environment. - -To check out the list, evaluate (list-colors-display git-blame-light-colors).") - -(defvar git-blame-colors '() - "Colors used by git-blame. The list is built once when activating git-blame -minor mode.") - -(defvar git-blame-ancient-color "dark green" - "*Color to be used for ancient commit.") - -(defvar git-blame-autoupdate t - "*Automatically update the blame display while editing") - -(defvar git-blame-proc nil - "The running git-blame process") -(make-variable-buffer-local 'git-blame-proc) - -(defvar git-blame-overlays nil - "The git-blame overlays used in the current buffer.") -(make-variable-buffer-local 'git-blame-overlays) - -(defvar git-blame-cache nil - "A cache of git-blame information for the current buffer") -(make-variable-buffer-local 'git-blame-cache) - -(defvar git-blame-idle-timer nil - "An idle timer that updates the blame") -(make-variable-buffer-local 'git-blame-cache) - -(defvar git-blame-update-queue nil - "A queue of update requests") -(make-variable-buffer-local 'git-blame-update-queue) - -;; FIXME: docstrings -(defvar git-blame-file nil) -(defvar git-blame-current nil) - -(defvar git-blame-mode nil) -(make-variable-buffer-local 'git-blame-mode) - -(defvar git-blame-mode-line-string " blame" - "String to display on the mode line when git-blame is active.") - -(or (assq 'git-blame-mode minor-mode-alist) - (setq minor-mode-alist - (cons '(git-blame-mode git-blame-mode-line-string) minor-mode-alist))) - -;;;###autoload -(defun git-blame-mode (&optional arg) - "Toggle minor mode for displaying Git blame - -With prefix ARG, turn the mode on if ARG is positive." - (interactive "P") - (cond - ((null arg) - (if git-blame-mode (git-blame-mode-off) (git-blame-mode-on))) - ((> (prefix-numeric-value arg) 0) (git-blame-mode-on)) - (t (git-blame-mode-off)))) - -(defun git-blame-mode-on () - "Turn on git-blame mode. - -See also function `git-blame-mode'." - (make-local-variable 'git-blame-colors) - (if git-blame-autoupdate - (add-hook 'after-change-functions 'git-blame-after-change nil t) - (remove-hook 'after-change-functions 'git-blame-after-change t)) - (git-blame-cleanup) - (let ((bgmode (cdr (assoc 'background-mode (frame-parameters))))) - (if (eq bgmode 'dark) - (setq git-blame-colors git-blame-dark-colors) - (setq git-blame-colors git-blame-light-colors))) - (setq git-blame-cache (make-hash-table :test 'equal)) - (setq git-blame-mode t) - (git-blame-run)) - -(defun git-blame-mode-off () - "Turn off git-blame mode. - -See also function `git-blame-mode'." - (git-blame-cleanup) - (if git-blame-idle-timer (cancel-timer git-blame-idle-timer)) - (setq git-blame-mode nil)) - -;;;###autoload -(defun git-reblame () - "Recalculate all blame information in the current buffer" - (interactive) - (unless git-blame-mode - (error "Git-blame is not active")) - - (git-blame-cleanup) - (git-blame-run)) - -(defun git-blame-run (&optional startline endline) - (if git-blame-proc - ;; Should maybe queue up a new run here - (message "Already running git blame") - (let ((display-buf (current-buffer)) - (blame-buf (get-buffer-create - (concat " git blame for " (buffer-name)))) - (args '("--incremental" "--contents" "-"))) - (if startline - (setq args (append args - (list "-L" (format "%d,%d" startline endline))))) - (setq args (append args - (list (file-name-nondirectory buffer-file-name)))) - (setq git-blame-proc - (apply 'start-process - "git-blame" blame-buf - "git" "blame" - args)) - (with-current-buffer blame-buf - (erase-buffer) - (make-local-variable 'git-blame-file) - (make-local-variable 'git-blame-current) - (setq git-blame-file display-buf) - (setq git-blame-current nil)) - (set-process-filter git-blame-proc 'git-blame-filter) - (set-process-sentinel git-blame-proc 'git-blame-sentinel) - (process-send-region git-blame-proc (point-min) (point-max)) - (process-send-eof git-blame-proc)))) - -(defun remove-git-blame-text-properties (start end) - (let ((modified (buffer-modified-p)) - (inhibit-read-only t)) - (remove-text-properties start end '(point-entered nil)) - (set-buffer-modified-p modified))) - -(defun git-blame-cleanup () - "Remove all blame properties" - (mapc 'delete-overlay git-blame-overlays) - (setq git-blame-overlays nil) - (remove-git-blame-text-properties (point-min) (point-max))) - -(defun git-blame-update-region (start end) - "Rerun blame to get updates between START and END" - (let ((overlays (overlays-in start end))) - (while overlays - (let ((overlay (pop overlays))) - (if (< (overlay-start overlay) start) - (setq start (overlay-start overlay))) - (if (> (overlay-end overlay) end) - (setq end (overlay-end overlay))) - (setq git-blame-overlays (delete overlay git-blame-overlays)) - (delete-overlay overlay)))) - (remove-git-blame-text-properties start end) - ;; We can be sure that start and end are at line breaks - (git-blame-run (1+ (count-lines (point-min) start)) - (count-lines (point-min) end))) - -(defun git-blame-sentinel (proc status) - (with-current-buffer (process-buffer proc) - (with-current-buffer git-blame-file - (setq git-blame-proc nil) - (if git-blame-update-queue - (git-blame-delayed-update)))) - ;;(kill-buffer (process-buffer proc)) - ;;(message "git blame finished") - ) - -(defvar in-blame-filter nil) - -(defun git-blame-filter (proc str) - (with-current-buffer (process-buffer proc) - (save-excursion - (goto-char (process-mark proc)) - (insert-before-markers str) - (goto-char (point-min)) - (unless in-blame-filter - (let ((more t) - (in-blame-filter t)) - (while more - (setq more (git-blame-parse)))))))) - -(defun git-blame-parse () - (cond ((looking-at "\\([0-9a-f]\\{40\\}\\) \\([0-9]+\\) \\([0-9]+\\) \\([0-9]+\\)\n") - (let ((hash (match-string 1)) - (src-line (string-to-number (match-string 2))) - (res-line (string-to-number (match-string 3))) - (num-lines (string-to-number (match-string 4)))) - (delete-region (point) (match-end 0)) - (setq git-blame-current (list (git-blame-new-commit hash) - src-line res-line num-lines))) - t) - ((looking-at "\\([a-z-]+\\) \\(.+\\)\n") - (let ((key (match-string 1)) - (value (match-string 2))) - (delete-region (point) (match-end 0)) - (git-blame-add-info (car git-blame-current) key value) - (when (string= key "filename") - (git-blame-create-overlay (car git-blame-current) - (caddr git-blame-current) - (cadddr git-blame-current)) - (setq git-blame-current nil))) - t) - (t - nil))) - -(defun git-blame-new-commit (hash) - (with-current-buffer git-blame-file - (or (gethash hash git-blame-cache) - ;; Assign a random color to each new commit info - ;; Take care not to select the same color multiple times - (let* ((color (if git-blame-colors - (git-blame-random-pop git-blame-colors) - git-blame-ancient-color)) - (info `(,hash (color . ,color)))) - (puthash hash info git-blame-cache) - info)))) - -(defun git-blame-create-overlay (info start-line num-lines) - (with-current-buffer git-blame-file - (save-excursion - (let ((inhibit-point-motion-hooks t) - (inhibit-modification-hooks t)) - (goto-char (point-min)) - (forward-line (1- start-line)) - (let* ((start (point)) - (end (progn (forward-line num-lines) (point))) - (ovl (make-overlay start end)) - (hash (car info)) - (spec `((?h . ,(substring hash 0 6)) - (?H . ,hash) - (?a . ,(git-blame-get-info info 'author)) - (?A . ,(git-blame-get-info info 'author-mail)) - (?c . ,(git-blame-get-info info 'committer)) - (?C . ,(git-blame-get-info info 'committer-mail)) - (?s . ,(git-blame-get-info info 'summary))))) - (push ovl git-blame-overlays) - (overlay-put ovl 'git-blame info) - (overlay-put ovl 'help-echo - (format-spec git-blame-mouseover-format spec)) - (if git-blame-use-colors - (overlay-put ovl 'face (list :background - (cdr (assq 'color (cdr info)))))) - (overlay-put ovl 'line-prefix - (propertize (format-spec git-blame-prefix-format spec) - 'face 'git-blame-prefix-face))))))) - -(defun git-blame-add-info (info key value) - (nconc info (list (cons (intern key) value)))) - -(defun git-blame-get-info (info key) - (cdr (assq key (cdr info)))) - -(defun git-blame-current-commit () - (let ((info (get-char-property (point) 'git-blame))) - (if info - (car info) - (error "No commit info")))) - -(defun git-describe-commit (hash) - (with-temp-buffer - (call-process "git" nil t nil - "log" "-1" - (concat "--pretty=" git-blame-log-oneline-format) - hash) - (buffer-substring (point-min) (point-max)))) - -(defvar git-blame-last-identification nil) -(make-variable-buffer-local 'git-blame-last-identification) -(defun git-blame-identify (&optional hash) - (interactive) - (let ((info (gethash (or hash (git-blame-current-commit)) git-blame-cache))) - (when (and info (not (eq info git-blame-last-identification))) - (message "%s" (nth 4 info)) - (setq git-blame-last-identification info)))) - -;; (defun git-blame-after-save () -;; (when git-blame-mode -;; (git-blame-cleanup) -;; (git-blame-run))) -;; (add-hook 'after-save-hook 'git-blame-after-save) - -(defun git-blame-after-change (start end length) - (when git-blame-mode - (git-blame-enq-update start end))) - -(defvar git-blame-last-update nil) -(make-variable-buffer-local 'git-blame-last-update) -(defun git-blame-enq-update (start end) - "Mark the region between START and END as needing blame update" - ;; Try to be smart and avoid multiple callouts for sequential - ;; editing - (cond ((and git-blame-last-update - (= start (cdr git-blame-last-update))) - (setcdr git-blame-last-update end)) - ((and git-blame-last-update - (= end (car git-blame-last-update))) - (setcar git-blame-last-update start)) - (t - (setq git-blame-last-update (cons start end)) - (setq git-blame-update-queue (nconc git-blame-update-queue - (list git-blame-last-update))))) - (unless (or git-blame-proc git-blame-idle-timer) - (setq git-blame-idle-timer - (run-with-idle-timer 0.5 nil 'git-blame-delayed-update)))) - -(defun git-blame-delayed-update () - (setq git-blame-idle-timer nil) - (if git-blame-update-queue - (let ((first (pop git-blame-update-queue)) - (inhibit-point-motion-hooks t)) - (git-blame-update-region (car first) (cdr first))))) - -(provide 'git-blame) - -;;; git-blame.el ends here diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el deleted file mode 100644 index 97919f2d73..0000000000 --- a/contrib/emacs/git.el +++ /dev/null @@ -1,1704 +0,0 @@ -;;; git.el --- A user interface for git - -;; Copyright (C) 2005, 2006, 2007, 2008, 2009 Alexandre Julliard <julliard@winehq.org> - -;; Version: 1.0 - -;; This program is free software; you can redistribute it and/or -;; modify it under the terms of the GNU General Public License as -;; published by the Free Software Foundation; either version 2 of -;; the License, or (at your option) any later version. -;; -;; This program is distributed in the hope that it will be -;; useful, but WITHOUT ANY WARRANTY; without even the implied -;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR -;; PURPOSE. See the GNU General Public License for more details. -;; -;; You should have received a copy of the GNU General Public -;; License along with this program; if not, see -;; <http://www.gnu.org/licenses/>. - -;;; Commentary: - -;; This file contains an interface for the git version control -;; system. It provides easy access to the most frequently used git -;; commands. The user interface is as far as possible identical to -;; that of the PCL-CVS mode. -;; -;; To install: put this file on the load-path and place the following -;; in your .emacs file: -;; -;; (require 'git) -;; -;; To start: `M-x git-status' -;; -;; TODO -;; - diff against other branch -;; - renaming files from the status buffer -;; - creating tags -;; - fetch/pull -;; - revlist browser -;; - git-show-branch browser -;; - -;;; Compatibility: -;; -;; This file works on GNU Emacs 21 or later. It may work on older -;; versions but this is not guaranteed. -;; -;; It may work on XEmacs 21, provided that you first install the ewoc -;; and log-edit packages. -;; - -(eval-when-compile (require 'cl)) -(require 'ewoc) -(require 'log-edit) -(require 'easymenu) - - -;;;; Customizations -;;;; ------------------------------------------------------------ - -(defgroup git nil - "A user interface for the git versioning system." - :group 'tools) - -(defcustom git-committer-name nil - "User name to use for commits. -The default is to fall back to the repository config, -then to `add-log-full-name' and then to `user-full-name'." - :group 'git - :type '(choice (const :tag "Default" nil) - (string :tag "Name"))) - -(defcustom git-committer-email nil - "Email address to use for commits. -The default is to fall back to the git repository config, -then to `add-log-mailing-address' and then to `user-mail-address'." - :group 'git - :type '(choice (const :tag "Default" nil) - (string :tag "Email"))) - -(defcustom git-commits-coding-system nil - "Default coding system for the log message of git commits." - :group 'git - :type '(choice (const :tag "From repository config" nil) - (coding-system))) - -(defcustom git-append-signed-off-by nil - "Whether to append a Signed-off-by line to the commit message before editing." - :group 'git - :type 'boolean) - -(defcustom git-reuse-status-buffer t - "Whether `git-status' should try to reuse an existing buffer -if there is already one that displays the same directory." - :group 'git - :type 'boolean) - -(defcustom git-per-dir-ignore-file ".gitignore" - "Name of the per-directory ignore file." - :group 'git - :type 'string) - -(defcustom git-show-uptodate nil - "Whether to display up-to-date files." - :group 'git - :type 'boolean) - -(defcustom git-show-ignored nil - "Whether to display ignored files." - :group 'git - :type 'boolean) - -(defcustom git-show-unknown t - "Whether to display unknown files." - :group 'git - :type 'boolean) - - -(defface git-status-face - '((((class color) (background light)) (:foreground "purple")) - (((class color) (background dark)) (:foreground "salmon"))) - "Git mode face used to highlight added and modified files." - :group 'git) - -(defface git-unmerged-face - '((((class color) (background light)) (:foreground "red" :bold t)) - (((class color) (background dark)) (:foreground "red" :bold t))) - "Git mode face used to highlight unmerged files." - :group 'git) - -(defface git-unknown-face - '((((class color) (background light)) (:foreground "goldenrod" :bold t)) - (((class color) (background dark)) (:foreground "goldenrod" :bold t))) - "Git mode face used to highlight unknown files." - :group 'git) - -(defface git-uptodate-face - '((((class color) (background light)) (:foreground "grey60")) - (((class color) (background dark)) (:foreground "grey40"))) - "Git mode face used to highlight up-to-date files." - :group 'git) - -(defface git-ignored-face - '((((class color) (background light)) (:foreground "grey60")) - (((class color) (background dark)) (:foreground "grey40"))) - "Git mode face used to highlight ignored files." - :group 'git) - -(defface git-mark-face - '((((class color) (background light)) (:foreground "red" :bold t)) - (((class color) (background dark)) (:foreground "tomato" :bold t))) - "Git mode face used for the file marks." - :group 'git) - -(defface git-header-face - '((((class color) (background light)) (:foreground "blue")) - (((class color) (background dark)) (:foreground "blue"))) - "Git mode face used for commit headers." - :group 'git) - -(defface git-separator-face - '((((class color) (background light)) (:foreground "brown")) - (((class color) (background dark)) (:foreground "brown"))) - "Git mode face used for commit separator." - :group 'git) - -(defface git-permission-face - '((((class color) (background light)) (:foreground "green" :bold t)) - (((class color) (background dark)) (:foreground "green" :bold t))) - "Git mode face used for permission changes." - :group 'git) - - -;;;; Utilities -;;;; ------------------------------------------------------------ - -(defconst git-log-msg-separator "--- log message follows this line ---") - -(defvar git-log-edit-font-lock-keywords - `(("^\\(Author:\\|Date:\\|Merge:\\|Signed-off-by:\\)\\(.*\\)$" - (1 font-lock-keyword-face) - (2 font-lock-function-name-face)) - (,(concat "^\\(" (regexp-quote git-log-msg-separator) "\\)$") - (1 font-lock-comment-face)))) - -(defun git-get-env-strings (env) - "Build a list of NAME=VALUE strings from a list of environment strings." - (mapcar (lambda (entry) (concat (car entry) "=" (cdr entry))) env)) - -(defun git-call-process (buffer &rest args) - "Wrapper for call-process that sets environment strings." - (apply #'call-process "git" nil buffer nil args)) - -(defun git-call-process-display-error (&rest args) - "Wrapper for call-process that displays error messages." - (let* ((dir default-directory) - (buffer (get-buffer-create "*Git Command Output*")) - (ok (with-current-buffer buffer - (let ((default-directory dir) - (buffer-read-only nil)) - (erase-buffer) - (eq 0 (apply #'git-call-process (list buffer t) args)))))) - (unless ok (display-message-or-buffer buffer)) - ok)) - -(defun git-call-process-string (&rest args) - "Wrapper for call-process that returns the process output as a string, -or nil if the git command failed." - (with-temp-buffer - (and (eq 0 (apply #'git-call-process t args)) - (buffer-string)))) - -(defun git-call-process-string-display-error (&rest args) - "Wrapper for call-process that displays error message and returns -the process output as a string, or nil if the git command failed." - (with-temp-buffer - (if (eq 0 (apply #'git-call-process (list t t) args)) - (buffer-string) - (display-message-or-buffer (current-buffer)) - nil))) - -(defun git-run-process-region (buffer start end program args) - "Run a git process with a buffer region as input." - (let ((output-buffer (current-buffer)) - (dir default-directory)) - (with-current-buffer buffer - (cd dir) - (apply #'call-process-region start end program - nil (list output-buffer t) nil args)))) - -(defun git-run-command-buffer (buffer-name &rest args) - "Run a git command, sending the output to a buffer named BUFFER-NAME." - (let ((dir default-directory) - (buffer (get-buffer-create buffer-name))) - (message "Running git %s..." (car args)) - (with-current-buffer buffer - (let ((default-directory dir) - (buffer-read-only nil)) - (erase-buffer) - (apply #'git-call-process buffer args))) - (message "Running git %s...done" (car args)) - buffer)) - -(defun git-run-command-region (buffer start end env &rest args) - "Run a git command with specified buffer region as input." - (with-temp-buffer - (if (eq 0 (if env - (git-run-process-region - buffer start end "env" - (append (git-get-env-strings env) (list "git") args)) - (git-run-process-region buffer start end "git" args))) - (buffer-string) - (display-message-or-buffer (current-buffer)) - nil))) - -(defun git-run-hook (hook env &rest args) - "Run a git hook and display its output if any." - (let ((dir default-directory) - (hook-name (expand-file-name (concat ".git/hooks/" hook)))) - (or (not (file-executable-p hook-name)) - (let (status (buffer (get-buffer-create "*Git Hook Output*"))) - (with-current-buffer buffer - (erase-buffer) - (cd dir) - (setq status - (if env - (apply #'call-process "env" nil (list buffer t) nil - (append (git-get-env-strings env) (list hook-name) args)) - (apply #'call-process hook-name nil (list buffer t) nil args)))) - (display-message-or-buffer buffer) - (eq 0 status))))) - -(defun git-get-string-sha1 (string) - "Read a SHA1 from the specified string." - (and string - (string-match "[0-9a-f]\\{40\\}" string) - (match-string 0 string))) - -(defun git-get-committer-name () - "Return the name to use as GIT_COMMITTER_NAME." - ; copied from log-edit - (or git-committer-name - (git-config "user.name") - (and (boundp 'add-log-full-name) add-log-full-name) - (and (fboundp 'user-full-name) (user-full-name)) - (and (boundp 'user-full-name) user-full-name))) - -(defun git-get-committer-email () - "Return the email address to use as GIT_COMMITTER_EMAIL." - ; copied from log-edit - (or git-committer-email - (git-config "user.email") - (and (boundp 'add-log-mailing-address) add-log-mailing-address) - (and (fboundp 'user-mail-address) (user-mail-address)) - (and (boundp 'user-mail-address) user-mail-address))) - -(defun git-get-commits-coding-system () - "Return the coding system to use for commits." - (let ((repo-config (git-config "i18n.commitencoding"))) - (or git-commits-coding-system - (and repo-config - (fboundp 'locale-charset-to-coding-system) - (locale-charset-to-coding-system repo-config)) - 'utf-8))) - -(defun git-get-logoutput-coding-system () - "Return the coding system used for git-log output." - (let ((repo-config (or (git-config "i18n.logoutputencoding") - (git-config "i18n.commitencoding")))) - (or git-commits-coding-system - (and repo-config - (fboundp 'locale-charset-to-coding-system) - (locale-charset-to-coding-system repo-config)) - 'utf-8))) - -(defun git-escape-file-name (name) - "Escape a file name if necessary." - (if (string-match "[\n\t\"\\]" name) - (concat "\"" - (mapconcat (lambda (c) - (case c - (?\n "\\n") - (?\t "\\t") - (?\\ "\\\\") - (?\" "\\\"") - (t (char-to-string c)))) - name "") - "\"") - name)) - -(defun git-success-message (text files) - "Print a success message after having handled FILES." - (let ((n (length files))) - (if (equal n 1) - (message "%s %s" text (car files)) - (message "%s %d files" text n)))) - -(defun git-get-top-dir (dir) - "Retrieve the top-level directory of a git tree." - (let ((cdup (with-output-to-string - (with-current-buffer standard-output - (cd dir) - (unless (eq 0 (git-call-process t "rev-parse" "--show-cdup")) - (error "cannot find top-level git tree for %s." dir)))))) - (expand-file-name (concat (file-name-as-directory dir) - (car (split-string cdup "\n")))))) - -;stolen from pcl-cvs -(defun git-append-to-ignore (file) - "Add a file name to the ignore file in its directory." - (let* ((fullname (expand-file-name file)) - (dir (file-name-directory fullname)) - (name (file-name-nondirectory fullname)) - (ignore-name (expand-file-name git-per-dir-ignore-file dir)) - (created (not (file-exists-p ignore-name)))) - (save-window-excursion - (set-buffer (find-file-noselect ignore-name)) - (goto-char (point-max)) - (unless (zerop (current-column)) (insert "\n")) - (insert "/" name "\n") - (sort-lines nil (point-min) (point-max)) - (save-buffer)) - (when created - (git-call-process nil "update-index" "--add" "--" (file-relative-name ignore-name))) - (git-update-status-files (list (file-relative-name ignore-name))))) - -; propertize definition for XEmacs, stolen from erc-compat -(eval-when-compile - (unless (fboundp 'propertize) - (defun propertize (string &rest props) - (let ((string (copy-sequence string))) - (while props - (put-text-property 0 (length string) (nth 0 props) (nth 1 props) string) - (setq props (cddr props))) - string)))) - -;;;; Wrappers for basic git commands -;;;; ------------------------------------------------------------ - -(defun git-rev-parse (rev) - "Parse a revision name and return its SHA1." - (git-get-string-sha1 - (git-call-process-string "rev-parse" rev))) - -(defun git-config (key) - "Retrieve the value associated to KEY in the git repository config file." - (let ((str (git-call-process-string "config" key))) - (and str (car (split-string str "\n"))))) - -(defun git-symbolic-ref (ref) - "Wrapper for the git-symbolic-ref command." - (let ((str (git-call-process-string "symbolic-ref" ref))) - (and str (car (split-string str "\n"))))) - -(defun git-update-ref (ref newval &optional oldval reason) - "Update a reference by calling git-update-ref." - (let ((args (and oldval (list oldval)))) - (when newval (push newval args)) - (push ref args) - (when reason - (push reason args) - (push "-m" args)) - (unless newval (push "-d" args)) - (apply 'git-call-process-display-error "update-ref" args))) - -(defun git-for-each-ref (&rest specs) - "Return a list of refs using git-for-each-ref. -Each entry is a cons of (SHORT-NAME . FULL-NAME)." - (let (refs) - (with-temp-buffer - (apply #'git-call-process t "for-each-ref" "--format=%(refname)" specs) - (goto-char (point-min)) - (while (re-search-forward "^[^/\n]+/[^/\n]+/\\(.+\\)$" nil t) - (push (cons (match-string 1) (match-string 0)) refs))) - (nreverse refs))) - -(defun git-read-tree (tree &optional index-file) - "Read a tree into the index file." - (let ((process-environment - (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) process-environment))) - (apply 'git-call-process-display-error "read-tree" (if tree (list tree))))) - -(defun git-write-tree (&optional index-file) - "Call git-write-tree and return the resulting tree SHA1 as a string." - (let ((process-environment - (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) process-environment))) - (git-get-string-sha1 - (git-call-process-string-display-error "write-tree")))) - -(defun git-commit-tree (buffer tree parent) - "Create a commit and possibly update HEAD. -Create a commit with the message in BUFFER using the tree with hash TREE. -Use PARENT as the parent of the new commit. If PARENT is the current \"HEAD\", -update the \"HEAD\" reference to the new commit." - (let ((author-name (git-get-committer-name)) - (author-email (git-get-committer-email)) - (subject "commit (initial): ") - author-date log-start log-end args coding-system-for-write) - (when parent - (setq subject "commit: ") - (push "-p" args) - (push parent args)) - (with-current-buffer buffer - (goto-char (point-min)) - (if - (setq log-start (re-search-forward (concat "^" (regexp-quote git-log-msg-separator) "\n") nil t)) - (save-restriction - (narrow-to-region (point-min) log-start) - (goto-char (point-min)) - (when (re-search-forward "^Author: +\\(.*?\\) *<\\(.*\\)> *$" nil t) - (setq author-name (match-string 1) - author-email (match-string 2))) - (goto-char (point-min)) - (when (re-search-forward "^Date: +\\(.*\\)$" nil t) - (setq author-date (match-string 1))) - (goto-char (point-min)) - (when (re-search-forward "^Merge: +\\(.*\\)" nil t) - (setq subject "commit (merge): ") - (dolist (parent (split-string (match-string 1) " +" t)) - (push "-p" args) - (push parent args)))) - (setq log-start (point-min))) - (setq log-end (point-max)) - (goto-char log-start) - (when (re-search-forward ".*$" nil t) - (setq subject (concat subject (match-string 0)))) - (setq coding-system-for-write buffer-file-coding-system)) - (let ((commit - (git-get-string-sha1 - (let ((env `(("GIT_AUTHOR_NAME" . ,author-name) - ("GIT_AUTHOR_EMAIL" . ,author-email) - ("GIT_COMMITTER_NAME" . ,(git-get-committer-name)) - ("GIT_COMMITTER_EMAIL" . ,(git-get-committer-email))))) - (when author-date (push `("GIT_AUTHOR_DATE" . ,author-date) env)) - (apply #'git-run-command-region - buffer log-start log-end env - "commit-tree" tree (nreverse args)))))) - (when commit (git-update-ref "HEAD" commit parent subject)) - commit))) - -(defun git-empty-db-p () - "Check if the git db is empty (no commit done yet)." - (not (eq 0 (git-call-process nil "rev-parse" "--verify" "HEAD")))) - -(defun git-get-merge-heads () - "Retrieve the merge heads from the MERGE_HEAD file if present." - (let (heads) - (when (file-readable-p ".git/MERGE_HEAD") - (with-temp-buffer - (insert-file-contents ".git/MERGE_HEAD" nil nil nil t) - (goto-char (point-min)) - (while (re-search-forward "[0-9a-f]\\{40\\}" nil t) - (push (match-string 0) heads)))) - (nreverse heads))) - -(defun git-get-commit-description (commit) - "Get a one-line description of COMMIT." - (let ((coding-system-for-read (git-get-logoutput-coding-system))) - (let ((descr (git-call-process-string "log" "--max-count=1" "--pretty=oneline" commit))) - (if (and descr (string-match "\\`\\([0-9a-f]\\{40\\}\\) *\\(.*\\)$" descr)) - (concat (substring (match-string 1 descr) 0 10) " - " (match-string 2 descr)) - descr)))) - -;;;; File info structure -;;;; ------------------------------------------------------------ - -; fileinfo structure stolen from pcl-cvs -(defstruct (git-fileinfo - (:copier nil) - (:constructor git-create-fileinfo (state name &optional old-perm new-perm rename-state orig-name marked)) - (:conc-name git-fileinfo->)) - marked ;; t/nil - state ;; current state - name ;; file name - old-perm new-perm ;; permission flags - rename-state ;; rename or copy state - orig-name ;; original name for renames or copies - needs-update ;; whether file needs to be updated - needs-refresh) ;; whether file needs to be refreshed - -(defvar git-status nil) - -(defun git-set-fileinfo-state (info state) - "Set the state of a file info." - (unless (eq (git-fileinfo->state info) state) - (setf (git-fileinfo->state info) state - (git-fileinfo->new-perm info) (git-fileinfo->old-perm info) - (git-fileinfo->rename-state info) nil - (git-fileinfo->orig-name info) nil - (git-fileinfo->needs-update info) nil - (git-fileinfo->needs-refresh info) t))) - -(defun git-status-filenames-map (status func files &rest args) - "Apply FUNC to the status files names in the FILES list. -The list must be sorted." - (when files - (let ((file (pop files)) - (node (ewoc-nth status 0))) - (while (and file node) - (let* ((info (ewoc-data node)) - (name (git-fileinfo->name info))) - (if (string-lessp name file) - (setq node (ewoc-next status node)) - (if (string-equal name file) - (apply func info args)) - (setq file (pop files)))))))) - -(defun git-set-filenames-state (status files state) - "Set the state of a list of named files. The list must be sorted" - (when files - (git-status-filenames-map status #'git-set-fileinfo-state files state) - (unless state ;; delete files whose state has been set to nil - (ewoc-filter status (lambda (info) (git-fileinfo->state info)))))) - -(defun git-state-code (code) - "Convert from a string to a added/deleted/modified state." - (case (string-to-char code) - (?M 'modified) - (?? 'unknown) - (?A 'added) - (?D 'deleted) - (?U 'unmerged) - (?T 'modified) - (t nil))) - -(defun git-status-code-as-string (code) - "Format a git status code as string." - (case code - ('modified (propertize "Modified" 'face 'git-status-face)) - ('unknown (propertize "Unknown " 'face 'git-unknown-face)) - ('added (propertize "Added " 'face 'git-status-face)) - ('deleted (propertize "Deleted " 'face 'git-status-face)) - ('unmerged (propertize "Unmerged" 'face 'git-unmerged-face)) - ('uptodate (propertize "Uptodate" 'face 'git-uptodate-face)) - ('ignored (propertize "Ignored " 'face 'git-ignored-face)) - (t "? "))) - -(defun git-file-type-as-string (old-perm new-perm) - "Return a string describing the file type based on its permissions." - (let* ((old-type (lsh (or old-perm 0) -9)) - (new-type (lsh (or new-perm 0) -9)) - (str (case new-type - (64 ;; file - (case old-type - (64 nil) - (80 " (type change symlink -> file)") - (112 " (type change subproject -> file)"))) - (80 ;; symlink - (case old-type - (64 " (type change file -> symlink)") - (112 " (type change subproject -> symlink)") - (t " (symlink)"))) - (112 ;; subproject - (case old-type - (64 " (type change file -> subproject)") - (80 " (type change symlink -> subproject)") - (t " (subproject)"))) - (72 nil) ;; directory (internal, not a real git state) - (0 ;; deleted or unknown - (case old-type - (80 " (symlink)") - (112 " (subproject)"))) - (t (format " (unknown type %o)" new-type))))) - (cond (str (propertize str 'face 'git-status-face)) - ((eq new-type 72) "/") - (t "")))) - -(defun git-rename-as-string (info) - "Return a string describing the copy or rename associated with INFO, or an empty string if none." - (let ((state (git-fileinfo->rename-state info))) - (if state - (propertize - (concat " (" - (if (eq state 'copy) "copied from " - (if (eq (git-fileinfo->state info) 'added) "renamed from " - "renamed to ")) - (git-escape-file-name (git-fileinfo->orig-name info)) - ")") 'face 'git-status-face) - ""))) - -(defun git-permissions-as-string (old-perm new-perm) - "Format a permission change as string." - (propertize - (if (or (not old-perm) - (not new-perm) - (eq 0 (logand ?\111 (logxor old-perm new-perm)))) - " " - (if (eq 0 (logand ?\111 old-perm)) "+x" "-x")) - 'face 'git-permission-face)) - -(defun git-fileinfo-prettyprint (info) - "Pretty-printer for the git-fileinfo structure." - (let ((old-perm (git-fileinfo->old-perm info)) - (new-perm (git-fileinfo->new-perm info))) - (insert (concat " " (if (git-fileinfo->marked info) (propertize "*" 'face 'git-mark-face) " ") - " " (git-status-code-as-string (git-fileinfo->state info)) - " " (git-permissions-as-string old-perm new-perm) - " " (git-escape-file-name (git-fileinfo->name info)) - (git-file-type-as-string old-perm new-perm) - (git-rename-as-string info))))) - -(defun git-update-node-fileinfo (node info) - "Update the fileinfo of the specified node. The names are assumed to match already." - (let ((data (ewoc-data node))) - (setf - ;; preserve the marked flag - (git-fileinfo->marked info) (git-fileinfo->marked data) - (git-fileinfo->needs-update data) nil) - (when (not (equal info data)) - (setf (git-fileinfo->needs-refresh info) t - (ewoc-data node) info)))) - -(defun git-insert-info-list (status infolist files) - "Insert a sorted list of file infos in the status buffer, replacing existing ones if any." - (let* ((info (pop infolist)) - (node (ewoc-nth status 0)) - (name (and info (git-fileinfo->name info))) - remaining) - (while info - (let ((nodename (and node (git-fileinfo->name (ewoc-data node))))) - (while (and files (string-lessp (car files) name)) - (push (pop files) remaining)) - (when (and files (string-equal (car files) name)) - (setq files (cdr files))) - (cond ((not nodename) - (setq node (ewoc-enter-last status info)) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info)))) - ((string-lessp nodename name) - (setq node (ewoc-next status node))) - ((string-equal nodename name) - ;; preserve the marked flag - (git-update-node-fileinfo node info) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info)))) - (t - (setq node (ewoc-enter-before status node info)) - (setq info (pop infolist)) - (setq name (and info (git-fileinfo->name info))))))) - (nconc (nreverse remaining) files))) - -(defun git-run-diff-index (status files) - "Run git-diff-index on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "diff-index" "-z" "-M" "HEAD" "--" files) - (goto-char (point-min)) - (while (re-search-forward - ":\\([0-7]\\{6\\}\\) \\([0-7]\\{6\\}\\) [0-9a-f]\\{40\\} [0-9a-f]\\{40\\} \\(\\([ADMUT]\\)\0\\([^\0]+\\)\\|\\([CR]\\)[0-9]*\0\\([^\0]+\\)\0\\([^\0]+\\)\\)\0" - nil t 1) - (let ((old-perm (string-to-number (match-string 1) 8)) - (new-perm (string-to-number (match-string 2) 8)) - (state (or (match-string 4) (match-string 6))) - (name (or (match-string 5) (match-string 7))) - (new-name (match-string 8))) - (if new-name ; copy or rename - (if (eq ?C (string-to-char state)) - (push (git-create-fileinfo 'added new-name old-perm new-perm 'copy name) infolist) - (push (git-create-fileinfo 'deleted name 0 0 'rename new-name) infolist) - (push (git-create-fileinfo 'added new-name old-perm new-perm 'rename name) infolist)) - (push (git-create-fileinfo (git-state-code state) name old-perm new-perm) infolist))))) - (setq infolist (sort (nreverse infolist) - (lambda (info1 info2) - (string-lessp (git-fileinfo->name info1) - (git-fileinfo->name info2))))) - (git-insert-info-list status infolist files))) - -(defun git-find-status-file (status file) - "Find a given file in the status ewoc and return its node." - (let ((node (ewoc-nth status 0))) - (while (and node (not (string= file (git-fileinfo->name (ewoc-data node))))) - (setq node (ewoc-next status node))) - node)) - -(defun git-run-ls-files (status files default-state &rest options) - "Run git-ls-files on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" (append options (list "--") files)) - (goto-char (point-min)) - (while (re-search-forward "\\([^\0]*?\\)\\(/?\\)\0" nil t 1) - (let ((name (match-string 1))) - (push (git-create-fileinfo default-state name 0 - (if (string-equal "/" (match-string 2)) (lsh ?\110 9) 0)) - infolist)))) - (setq infolist (nreverse infolist)) ;; assume it is sorted already - (git-insert-info-list status infolist files))) - -(defun git-run-ls-files-cached (status files default-state) - "Run git-ls-files -c on FILES and parse the results into STATUS. -Return the list of files that haven't been handled." - (let (infolist) - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" "-s" "-c" "--" files) - (goto-char (point-min)) - (while (re-search-forward "\\([0-7]\\{6\\}\\) [0-9a-f]\\{40\\} 0\t\\([^\0]+\\)\0" nil t) - (let* ((new-perm (string-to-number (match-string 1) 8)) - (old-perm (if (eq default-state 'added) 0 new-perm)) - (name (match-string 2))) - (push (git-create-fileinfo default-state name old-perm new-perm) infolist)))) - (setq infolist (nreverse infolist)) ;; assume it is sorted already - (git-insert-info-list status infolist files))) - -(defun git-run-ls-unmerged (status files) - "Run git-ls-files -u on FILES and parse the results into STATUS." - (with-temp-buffer - (apply #'git-call-process t "ls-files" "-z" "-u" "--" files) - (goto-char (point-min)) - (let (unmerged-files) - (while (re-search-forward "[0-7]\\{6\\} [0-9a-f]\\{40\\} [123]\t\\([^\0]+\\)\0" nil t) - (push (match-string 1) unmerged-files)) - (setq unmerged-files (nreverse unmerged-files)) ;; assume it is sorted already - (git-set-filenames-state status unmerged-files 'unmerged)))) - -(defun git-get-exclude-files () - "Get the list of exclude files to pass to git-ls-files." - (let (files - (config (git-config "core.excludesfile"))) - (when (file-readable-p ".git/info/exclude") - (push ".git/info/exclude" files)) - (when (and config (file-readable-p config)) - (push config files)) - files)) - -(defun git-run-ls-files-with-excludes (status files default-state &rest options) - "Run git-ls-files on FILES with appropriate --exclude-from options." - (let ((exclude-files (git-get-exclude-files))) - (apply #'git-run-ls-files status files default-state "--directory" "--no-empty-directory" - (concat "--exclude-per-directory=" git-per-dir-ignore-file) - (append options (mapcar (lambda (f) (concat "--exclude-from=" f)) exclude-files))))) - -(defun git-update-status-files (&optional files mark-files) - "Update the status of FILES from the index. -The FILES list must be sorted." - (unless git-status (error "Not in git-status buffer.")) - ;; set the needs-update flag on existing files - (if files - (git-status-filenames-map - git-status (lambda (info) (setf (git-fileinfo->needs-update info) t)) files) - (ewoc-map (lambda (info) (setf (git-fileinfo->needs-update info) t) nil) git-status) - (git-call-process nil "update-index" "--refresh") - (when git-show-uptodate - (git-run-ls-files-cached git-status nil 'uptodate))) - (let ((remaining-files - (if (git-empty-db-p) ; we need some special handling for an empty db - (git-run-ls-files-cached git-status files 'added) - (git-run-diff-index git-status files)))) - (git-run-ls-unmerged git-status files) - (when (or remaining-files (and git-show-unknown (not files))) - (setq remaining-files (git-run-ls-files-with-excludes git-status remaining-files 'unknown "-o"))) - (when (or remaining-files (and git-show-ignored (not files))) - (setq remaining-files (git-run-ls-files-with-excludes git-status remaining-files 'ignored "-o" "-i"))) - (unless files - (setq remaining-files (git-get-filenames (ewoc-collect git-status #'git-fileinfo->needs-update)))) - (when remaining-files - (setq remaining-files (git-run-ls-files-cached git-status remaining-files 'uptodate))) - (git-set-filenames-state git-status remaining-files nil) - (when mark-files (git-mark-files git-status files)) - (git-refresh-files) - (git-refresh-ewoc-hf git-status))) - -(defun git-mark-files (status files) - "Mark all the specified FILES, and unmark the others." - (let ((file (and files (pop files))) - (node (ewoc-nth status 0))) - (while node - (let ((info (ewoc-data node))) - (if (and file (string-equal (git-fileinfo->name info) file)) - (progn - (unless (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) t) - (setf (git-fileinfo->needs-refresh info) t)) - (setq file (pop files)) - (setq node (ewoc-next status node))) - (when (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) nil) - (setf (git-fileinfo->needs-refresh info) t)) - (if (and file (string-lessp file (git-fileinfo->name info))) - (setq file (pop files)) - (setq node (ewoc-next status node)))))))) - -(defun git-marked-files () - "Return a list of all marked files, or if none a list containing just the file at cursor position." - (unless git-status (error "Not in git-status buffer.")) - (or (ewoc-collect git-status (lambda (info) (git-fileinfo->marked info))) - (list (ewoc-data (ewoc-locate git-status))))) - -(defun git-marked-files-state (&rest states) - "Return a sorted list of marked files that are in the specified states." - (let ((files (git-marked-files)) - result) - (dolist (info files) - (when (memq (git-fileinfo->state info) states) - (push info result))) - (nreverse result))) - -(defun git-refresh-files () - "Refresh all files that need it and clear the needs-refresh flag." - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map - (lambda (info) - (let ((refresh (git-fileinfo->needs-refresh info))) - (setf (git-fileinfo->needs-refresh info) nil) - refresh)) - git-status) - ; move back to goal column - (when goal-column (move-to-column goal-column))) - -(defun git-refresh-ewoc-hf (status) - "Refresh the ewoc header and footer." - (let ((branch (git-symbolic-ref "HEAD")) - (head (if (git-empty-db-p) "Nothing committed yet" - (git-get-commit-description "HEAD"))) - (merge-heads (git-get-merge-heads))) - (ewoc-set-hf status - (format "Directory: %s\nBranch: %s\nHead: %s%s\n" - default-directory - (if branch - (if (string-match "^refs/heads/" branch) - (substring branch (match-end 0)) - branch) - "none (detached HEAD)") - head - (if merge-heads - (concat "\nMerging: " - (mapconcat (lambda (str) (git-get-commit-description str)) merge-heads "\n ")) - "")) - (if (ewoc-nth status 0) "" " No changes.")))) - -(defun git-get-filenames (files) - (mapcar (lambda (info) (git-fileinfo->name info)) files)) - -(defun git-update-index (index-file files) - "Run git-update-index on a list of files." - (let ((process-environment (append (and index-file (list (concat "GIT_INDEX_FILE=" index-file))) - process-environment)) - added deleted modified) - (dolist (info files) - (case (git-fileinfo->state info) - ('added (push info added)) - ('deleted (push info deleted)) - ('modified (push info modified)))) - (and - (or (not added) (apply #'git-call-process-display-error "update-index" "--add" "--" (git-get-filenames added))) - (or (not deleted) (apply #'git-call-process-display-error "update-index" "--remove" "--" (git-get-filenames deleted))) - (or (not modified) (apply #'git-call-process-display-error "update-index" "--" (git-get-filenames modified)))))) - -(defun git-run-pre-commit-hook () - "Run the pre-commit hook if any." - (unless git-status (error "Not in git-status buffer.")) - (let ((files (git-marked-files-state 'added 'deleted 'modified))) - (or (not files) - (not (file-executable-p ".git/hooks/pre-commit")) - (let ((index-file (make-temp-file "gitidx"))) - (unwind-protect - (let ((head-tree (unless (git-empty-db-p) (git-rev-parse "HEAD^{tree}")))) - (git-read-tree head-tree index-file) - (git-update-index index-file files) - (git-run-hook "pre-commit" `(("GIT_INDEX_FILE" . ,index-file)))) - (delete-file index-file)))))) - -(defun git-do-commit () - "Perform the actual commit using the current buffer as log message." - (interactive) - (let ((buffer (current-buffer)) - (index-file (make-temp-file "gitidx"))) - (with-current-buffer log-edit-parent-buffer - (if (git-marked-files-state 'unmerged) - (message "You cannot commit unmerged files, resolve them first.") - (unwind-protect - (let ((files (git-marked-files-state 'added 'deleted 'modified)) - head tree head-tree) - (unless (git-empty-db-p) - (setq head (git-rev-parse "HEAD") - head-tree (git-rev-parse "HEAD^{tree}"))) - (message "Running git commit...") - (when - (and - (git-read-tree head-tree index-file) - (git-update-index nil files) ;update both the default index - (git-update-index index-file files) ;and the temporary one - (setq tree (git-write-tree index-file))) - (if (or (not (string-equal tree head-tree)) - (yes-or-no-p "The tree was not modified, do you really want to perform an empty commit? ")) - (let ((commit (git-commit-tree buffer tree head))) - (when commit - (condition-case nil (delete-file ".git/MERGE_HEAD") (error nil)) - (condition-case nil (delete-file ".git/MERGE_MSG") (error nil)) - (with-current-buffer buffer (erase-buffer)) - (git-update-status-files (git-get-filenames files)) - (git-call-process nil "rerere") - (git-call-process nil "gc" "--auto") - (message "Committed %s." commit) - (git-run-hook "post-commit" nil))) - (message "Commit aborted.")))) - (delete-file index-file)))))) - - -;;;; Interactive functions -;;;; ------------------------------------------------------------ - -(defun git-mark-file () - "Mark the file that the cursor is on and move to the next one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) t) - (ewoc-invalidate git-status pos) - (ewoc-goto-next git-status 1))) - -(defun git-unmark-file () - "Unmark the file that the cursor is on and move to the next one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) nil) - (ewoc-invalidate git-status pos) - (ewoc-goto-next git-status 1))) - -(defun git-unmark-file-up () - "Unmark the file that the cursor is on and move to the previous one." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let* ((pos (ewoc-locate git-status)) - (info (ewoc-data pos))) - (setf (git-fileinfo->marked info) nil) - (ewoc-invalidate git-status pos) - (ewoc-goto-prev git-status 1))) - -(defun git-mark-all () - "Mark all files." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (unless (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) t))) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-unmark-all () - "Unmark all files." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (when (git-fileinfo->marked info) - (setf (git-fileinfo->marked info) nil) - t)) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-toggle-all-marks () - "Toggle all file marks." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (ewoc-map (lambda (info) (setf (git-fileinfo->marked info) (not (git-fileinfo->marked info))) t) git-status) - ; move back to goal column after invalidate - (when goal-column (move-to-column goal-column))) - -(defun git-next-file (&optional n) - "Move the selection down N files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (ewoc-goto-next git-status n)) - -(defun git-prev-file (&optional n) - "Move the selection up N files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (ewoc-goto-prev git-status n)) - -(defun git-next-unmerged-file (&optional n) - "Move the selection down N unmerged files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (let* ((last (ewoc-locate git-status)) - (node (ewoc-next git-status last))) - (while (and node (> n 0)) - (when (eq 'unmerged (git-fileinfo->state (ewoc-data node))) - (setq n (1- n)) - (setq last node)) - (setq node (ewoc-next git-status node))) - (ewoc-goto-node git-status last))) - -(defun git-prev-unmerged-file (&optional n) - "Move the selection up N unmerged files." - (interactive "p") - (unless git-status (error "Not in git-status buffer.")) - (let* ((last (ewoc-locate git-status)) - (node (ewoc-prev git-status last))) - (while (and node (> n 0)) - (when (eq 'unmerged (git-fileinfo->state (ewoc-data node))) - (setq n (1- n)) - (setq last node)) - (setq node (ewoc-prev git-status node))) - (ewoc-goto-node git-status last))) - -(defun git-insert-file (file) - "Insert file(s) into the git-status buffer." - (interactive "fInsert file: ") - (git-update-status-files (list (file-relative-name file)))) - -(defun git-add-file () - "Add marked file(s) to the index cache." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'unknown 'ignored 'unmerged)))) - ;; FIXME: add support for directories - (unless files - (push (file-relative-name (read-file-name "File to add: " nil nil t)) files)) - (when (apply 'git-call-process-display-error "update-index" "--add" "--" files) - (git-update-status-files files) - (git-success-message "Added" files)))) - -(defun git-ignore-file () - "Add marked file(s) to the ignore list." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'unknown)))) - (unless files - (push (file-relative-name (read-file-name "File to ignore: " nil nil t)) files)) - (dolist (f files) (git-append-to-ignore f)) - (git-update-status-files files) - (git-success-message "Ignored" files))) - -(defun git-remove-file () - "Remove the marked file(s)." - (interactive) - (let ((files (git-get-filenames (git-marked-files-state 'added 'modified 'unknown 'uptodate 'ignored)))) - (unless files - (push (file-relative-name (read-file-name "File to remove: " nil nil t)) files)) - (if (yes-or-no-p - (if (cdr files) - (format "Remove %d files? " (length files)) - (format "Remove %s? " (car files)))) - (progn - (dolist (name files) - (ignore-errors - (if (file-directory-p name) - (delete-directory name) - (delete-file name)))) - (when (apply 'git-call-process-display-error "update-index" "--remove" "--" files) - (git-update-status-files files) - (git-success-message "Removed" files))) - (message "Aborting")))) - -(defun git-revert-file () - "Revert changes to the marked file(s)." - (interactive) - (let ((files (git-marked-files-state 'added 'deleted 'modified 'unmerged)) - added modified) - (when (and files - (yes-or-no-p - (if (cdr files) - (format "Revert %d files? " (length files)) - (format "Revert %s? " (git-fileinfo->name (car files)))))) - (dolist (info files) - (case (git-fileinfo->state info) - ('added (push (git-fileinfo->name info) added)) - ('deleted (push (git-fileinfo->name info) modified)) - ('unmerged (push (git-fileinfo->name info) modified)) - ('modified (push (git-fileinfo->name info) modified)))) - ;; check if a buffer contains one of the files and isn't saved - (dolist (file modified) - (let ((buffer (get-file-buffer file))) - (when (and buffer (buffer-modified-p buffer)) - (error "Buffer %s is modified. Please kill or save modified buffers before reverting." (buffer-name buffer))))) - (let ((ok (and - (or (not added) - (apply 'git-call-process-display-error "update-index" "--force-remove" "--" added)) - (or (not modified) - (apply 'git-call-process-display-error "checkout" "HEAD" modified)))) - (names (git-get-filenames files))) - (git-update-status-files names) - (when ok - (dolist (file modified) - (let ((buffer (get-file-buffer file))) - (when buffer (with-current-buffer buffer (revert-buffer t t t))))) - (git-success-message "Reverted" names)))))) - -(defun git-remove-handled () - "Remove handled files from the status list." - (interactive) - (ewoc-filter git-status - (lambda (info) - (case (git-fileinfo->state info) - ('ignored git-show-ignored) - ('uptodate git-show-uptodate) - ('unknown git-show-unknown) - (t t)))) - (unless (ewoc-nth git-status 0) ; refresh header if list is empty - (git-refresh-ewoc-hf git-status))) - -(defun git-toggle-show-uptodate () - "Toogle the option for showing up-to-date files." - (interactive) - (if (setq git-show-uptodate (not git-show-uptodate)) - (git-refresh-status) - (git-remove-handled))) - -(defun git-toggle-show-ignored () - "Toogle the option for showing ignored files." - (interactive) - (if (setq git-show-ignored (not git-show-ignored)) - (progn - (message "Inserting ignored files...") - (git-run-ls-files-with-excludes git-status nil 'ignored "-o" "-i") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - (message "Inserting ignored files...done")) - (git-remove-handled))) - -(defun git-toggle-show-unknown () - "Toogle the option for showing unknown files." - (interactive) - (if (setq git-show-unknown (not git-show-unknown)) - (progn - (message "Inserting unknown files...") - (git-run-ls-files-with-excludes git-status nil 'unknown "-o") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - (message "Inserting unknown files...done")) - (git-remove-handled))) - -(defun git-expand-directory (info) - "Expand the directory represented by INFO to list its files." - (when (eq (lsh (git-fileinfo->new-perm info) -9) ?\110) - (let ((dir (git-fileinfo->name info))) - (git-set-filenames-state git-status (list dir) nil) - (git-run-ls-files-with-excludes git-status (list (concat dir "/")) 'unknown "-o") - (git-refresh-files) - (git-refresh-ewoc-hf git-status) - t))) - -(defun git-setup-diff-buffer (buffer) - "Setup a buffer for displaying a diff." - (let ((dir default-directory)) - (with-current-buffer buffer - (diff-mode) - (goto-char (point-min)) - (setq default-directory dir) - (setq buffer-read-only t))) - (display-buffer buffer) - ; shrink window only if it displays the status buffer - (when (eq (window-buffer) (current-buffer)) - (shrink-window-if-larger-than-buffer))) - -(defun git-diff-file () - "Diff the marked file(s) against HEAD." - (interactive) - (let ((files (git-marked-files))) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-index" "-p" "-M" "HEAD" "--" (git-get-filenames files))))) - -(defun git-diff-file-merge-head (arg) - "Diff the marked file(s) against the first merge head (or the nth one with a numeric prefix)." - (interactive "p") - (let ((files (git-marked-files)) - (merge-heads (git-get-merge-heads))) - (unless merge-heads (error "No merge in progress")) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-index" "-p" "-M" - (or (nth (1- arg) merge-heads) "HEAD") "--" (git-get-filenames files))))) - -(defun git-diff-unmerged-file (stage) - "Diff the marked unmerged file(s) against the specified stage." - (let ((files (git-marked-files))) - (git-setup-diff-buffer - (apply #'git-run-command-buffer "*git-diff*" "diff-files" "-p" stage "--" (git-get-filenames files))))) - -(defun git-diff-file-base () - "Diff the marked unmerged file(s) against the common base file." - (interactive) - (git-diff-unmerged-file "-1")) - -(defun git-diff-file-mine () - "Diff the marked unmerged file(s) against my pre-merge version." - (interactive) - (git-diff-unmerged-file "-2")) - -(defun git-diff-file-other () - "Diff the marked unmerged file(s) against the other's pre-merge version." - (interactive) - (git-diff-unmerged-file "-3")) - -(defun git-diff-file-combined () - "Do a combined diff of the marked unmerged file(s)." - (interactive) - (git-diff-unmerged-file "-c")) - -(defun git-diff-file-idiff () - "Perform an interactive diff on the current file." - (interactive) - (let ((files (git-marked-files-state 'added 'deleted 'modified))) - (unless (eq 1 (length files)) - (error "Cannot perform an interactive diff on multiple files.")) - (let* ((filename (car (git-get-filenames files))) - (buff1 (find-file-noselect filename)) - (buff2 (git-run-command-buffer (concat filename ".~HEAD~") "cat-file" "blob" (concat "HEAD:" filename)))) - (ediff-buffers buff1 buff2)))) - -(defun git-log-file () - "Display a log of changes to the marked file(s)." - (interactive) - (let* ((files (git-marked-files)) - (coding-system-for-read git-commits-coding-system) - (buffer (apply #'git-run-command-buffer "*git-log*" "rev-list" "--pretty" "HEAD" "--" (git-get-filenames files)))) - (with-current-buffer buffer - ; (git-log-mode) FIXME: implement log mode - (goto-char (point-min)) - (setq buffer-read-only t)) - (display-buffer buffer))) - -(defun git-log-edit-files () - "Return a list of marked files for use in the log-edit buffer." - (with-current-buffer log-edit-parent-buffer - (git-get-filenames (git-marked-files-state 'added 'deleted 'modified)))) - -(defun git-log-edit-diff () - "Run a diff of the current files being committed from a log-edit buffer." - (with-current-buffer log-edit-parent-buffer - (git-diff-file))) - -(defun git-append-sign-off (name email) - "Append a Signed-off-by entry to the current buffer, avoiding duplicates." - (let ((sign-off (format "Signed-off-by: %s <%s>" name email)) - (case-fold-search t)) - (goto-char (point-min)) - (unless (re-search-forward (concat "^" (regexp-quote sign-off)) nil t) - (goto-char (point-min)) - (unless (re-search-forward "^Signed-off-by: " nil t) - (setq sign-off (concat "\n" sign-off))) - (goto-char (point-max)) - (insert sign-off "\n")))) - -(defun git-setup-log-buffer (buffer &optional merge-heads author-name author-email subject date msg) - "Setup the log buffer for a commit." - (unless git-status (error "Not in git-status buffer.")) - (let ((dir default-directory) - (committer-name (git-get-committer-name)) - (committer-email (git-get-committer-email)) - (sign-off git-append-signed-off-by)) - (with-current-buffer buffer - (cd dir) - (erase-buffer) - (insert - (propertize - (format "Author: %s <%s>\n%s%s" - (or author-name committer-name) - (or author-email committer-email) - (if date (format "Date: %s\n" date) "") - (if merge-heads - (format "Merge: %s\n" - (mapconcat 'identity merge-heads " ")) - "")) - 'face 'git-header-face) - (propertize git-log-msg-separator 'face 'git-separator-face) - "\n") - (when subject (insert subject "\n\n")) - (cond (msg (insert msg "\n")) - ((file-readable-p ".git/rebase-apply/msg") - (insert-file-contents ".git/rebase-apply/msg")) - ((file-readable-p ".git/MERGE_MSG") - (insert-file-contents ".git/MERGE_MSG"))) - ; delete empty lines at end - (goto-char (point-min)) - (when (re-search-forward "\n+\\'" nil t) - (replace-match "\n" t t)) - (when sign-off (git-append-sign-off committer-name committer-email))) - buffer)) - -(define-derived-mode git-log-edit-mode log-edit-mode "Git-Log-Edit" - "Major mode for editing git log messages. - -Set up git-specific `font-lock-keywords' for `log-edit-mode'." - (set (make-local-variable 'font-lock-defaults) - '(git-log-edit-font-lock-keywords t t))) - -(defun git-commit-file () - "Commit the marked file(s), asking for a commit message." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (when (git-run-pre-commit-hook) - (let ((buffer (get-buffer-create "*git-commit*")) - (coding-system (git-get-commits-coding-system)) - author-name author-email subject date) - (when (eq 0 (buffer-size buffer)) - (when (file-readable-p ".git/rebase-apply/info") - (with-temp-buffer - (insert-file-contents ".git/rebase-apply/info") - (goto-char (point-min)) - (when (re-search-forward "^Author: \\(.*\\)\nEmail: \\(.*\\)$" nil t) - (setq author-name (match-string 1)) - (setq author-email (match-string 2))) - (goto-char (point-min)) - (when (re-search-forward "^Subject: \\(.*\\)$" nil t) - (setq subject (match-string 1))) - (goto-char (point-min)) - (when (re-search-forward "^Date: \\(.*\\)$" nil t) - (setq date (match-string 1))))) - (git-setup-log-buffer buffer (git-get-merge-heads) author-name author-email subject date)) - (if (boundp 'log-edit-diff-function) - (log-edit 'git-do-commit nil '((log-edit-listfun . git-log-edit-files) - (log-edit-diff-function . git-log-edit-diff)) buffer 'git-log-edit-mode) - (log-edit 'git-do-commit nil 'git-log-edit-files buffer - 'git-log-edit-mode)) - (setq paragraph-separate (concat (regexp-quote git-log-msg-separator) "$\\|Author: \\|Date: \\|Merge: \\|Signed-off-by: \\|\f\\|[ ]*$")) - (setq buffer-file-coding-system coding-system) - (re-search-forward (regexp-quote (concat git-log-msg-separator "\n")) nil t)))) - -(defun git-setup-commit-buffer (commit) - "Setup the commit buffer with the contents of COMMIT." - (let (parents author-name author-email subject date msg) - (with-temp-buffer - (let ((coding-system (git-get-logoutput-coding-system))) - (git-call-process t "log" "-1" "--pretty=medium" "--abbrev=40" commit) - (goto-char (point-min)) - (when (re-search-forward "^Merge: *\\(.*\\)$" nil t) - (setq parents (cdr (split-string (match-string 1) " +")))) - (when (re-search-forward "^Author: *\\(.*\\) <\\(.*\\)>$" nil t) - (setq author-name (match-string 1)) - (setq author-email (match-string 2))) - (when (re-search-forward "^Date: *\\(.*\\)$" nil t) - (setq date (match-string 1))) - (while (re-search-forward "^ \\(.*\\)$" nil t) - (push (match-string 1) msg)) - (setq msg (nreverse msg)) - (setq subject (pop msg)) - (while (and msg (zerop (length (car msg))) (pop msg))))) - (git-setup-log-buffer (get-buffer-create "*git-commit*") - parents author-name author-email subject date - (mapconcat #'identity msg "\n")))) - -(defun git-get-commit-files (commit) - "Retrieve a sorted list of files modified by COMMIT." - (let (files) - (with-temp-buffer - (git-call-process t "diff-tree" "-m" "-r" "-z" "--name-only" "--no-commit-id" "--root" commit) - (goto-char (point-min)) - (while (re-search-forward "\\([^\0]*\\)\0" nil t 1) - (push (match-string 1) files))) - (sort files #'string-lessp))) - -(defun git-read-commit-name (prompt &optional default) - "Ask for a commit name, with completion for local branch, remote branch and tag." - (completing-read prompt - (list* "HEAD" "ORIG_HEAD" "FETCH_HEAD" (mapcar #'car (git-for-each-ref))) - nil nil nil nil default)) - -(defun git-checkout (branch &optional merge) - "Checkout a branch, tag, or any commit. -Use a prefix arg if git should merge while checking out." - (interactive - (list (git-read-commit-name "Checkout: ") - current-prefix-arg)) - (unless git-status (error "Not in git-status buffer.")) - (let ((args (list branch "--"))) - (when merge (push "-m" args)) - (when (apply #'git-call-process-display-error "checkout" args) - (git-update-status-files)))) - -(defun git-branch (branch) - "Create a branch from the current HEAD and switch to it." - (interactive (list (git-read-commit-name "Branch: "))) - (unless git-status (error "Not in git-status buffer.")) - (if (git-rev-parse (concat "refs/heads/" branch)) - (if (yes-or-no-p (format "Branch %s already exists, replace it? " branch)) - (and (git-call-process-display-error "branch" "-f" branch) - (git-call-process-display-error "checkout" branch)) - (message "Canceled.")) - (git-call-process-display-error "checkout" "-b" branch)) - (git-refresh-ewoc-hf git-status)) - -(defun git-amend-commit () - "Undo the last commit on HEAD, and set things up to commit an -amended version of it." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (when (git-empty-db-p) (error "No commit to amend.")) - (let* ((commit (git-rev-parse "HEAD")) - (files (git-get-commit-files commit))) - (when (if (git-rev-parse "HEAD^") - (git-call-process-display-error "reset" "--soft" "HEAD^") - (and (git-update-ref "ORIG_HEAD" commit) - (git-update-ref "HEAD" nil commit))) - (git-update-status-files files t) - (git-setup-commit-buffer commit) - (git-commit-file)))) - -(defun git-cherry-pick-commit (arg) - "Cherry-pick a commit." - (interactive (list (git-read-commit-name "Cherry-pick commit: "))) - (unless git-status (error "Not in git-status buffer.")) - (let ((commit (git-rev-parse (concat arg "^0")))) - (unless commit (error "Not a valid commit '%s'." arg)) - (when (git-rev-parse (concat commit "^2")) - (error "Cannot cherry-pick a merge commit.")) - (let ((files (git-get-commit-files commit)) - (ok (git-call-process-display-error "cherry-pick" "-n" commit))) - (git-update-status-files files ok) - (with-current-buffer (git-setup-commit-buffer commit) - (goto-char (point-min)) - (if (re-search-forward "^\n*Signed-off-by:" nil t 1) - (goto-char (match-beginning 0)) - (goto-char (point-max))) - (insert "(cherry picked from commit " commit ")\n")) - (when ok (git-commit-file))))) - -(defun git-revert-commit (arg) - "Revert a commit." - (interactive (list (git-read-commit-name "Revert commit: "))) - (unless git-status (error "Not in git-status buffer.")) - (let ((commit (git-rev-parse (concat arg "^0")))) - (unless commit (error "Not a valid commit '%s'." arg)) - (when (git-rev-parse (concat commit "^2")) - (error "Cannot revert a merge commit.")) - (let ((files (git-get-commit-files commit)) - (subject (git-get-commit-description commit)) - (ok (git-call-process-display-error "revert" "-n" commit))) - (git-update-status-files files ok) - (when (string-match "^[0-9a-f]+ - \\(.*\\)$" subject) - (setq subject (match-string 1 subject))) - (git-setup-log-buffer (get-buffer-create "*git-commit*") - (git-get-merge-heads) nil nil (format "Revert \"%s\"" subject) nil - (format "This reverts commit %s.\n" commit)) - (when ok (git-commit-file))))) - -(defun git-find-file () - "Visit the current file in its own buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (unless (git-expand-directory info) - (find-file (git-fileinfo->name info)) - (when (eq 'unmerged (git-fileinfo->state info)) - (smerge-mode 1))))) - -(defun git-find-file-other-window () - "Visit the current file in its own buffer in another window." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (find-file-other-window (git-fileinfo->name info)) - (when (eq 'unmerged (git-fileinfo->state info)) - (smerge-mode)))) - -(defun git-find-file-imerge () - "Visit the current file in interactive merge mode." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (find-file (git-fileinfo->name info)) - (smerge-ediff))) - -(defun git-view-file () - "View the current file in its own buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (let ((info (ewoc-data (ewoc-locate git-status)))) - (view-file (git-fileinfo->name info)))) - -(defun git-refresh-status () - "Refresh the git status buffer." - (interactive) - (unless git-status (error "Not in git-status buffer.")) - (message "Refreshing git status...") - (git-update-status-files) - (message "Refreshing git status...done")) - -(defun git-status-quit () - "Quit git-status mode." - (interactive) - (bury-buffer)) - -;;;; Major Mode -;;;; ------------------------------------------------------------ - -(defvar git-status-mode-hook nil - "Run after `git-status-mode' is setup.") - -(defvar git-status-mode-map nil - "Keymap for git major mode.") - -(defvar git-status nil - "List of all files managed by the git-status mode.") - -(unless git-status-mode-map - (let ((map (make-keymap)) - (commit-map (make-sparse-keymap)) - (diff-map (make-sparse-keymap)) - (toggle-map (make-sparse-keymap))) - (suppress-keymap map) - (define-key map "?" 'git-help) - (define-key map "h" 'git-help) - (define-key map " " 'git-next-file) - (define-key map "a" 'git-add-file) - (define-key map "c" 'git-commit-file) - (define-key map "\C-c" commit-map) - (define-key map "d" diff-map) - (define-key map "=" 'git-diff-file) - (define-key map "f" 'git-find-file) - (define-key map "\r" 'git-find-file) - (define-key map "g" 'git-refresh-status) - (define-key map "i" 'git-ignore-file) - (define-key map "I" 'git-insert-file) - (define-key map "l" 'git-log-file) - (define-key map "m" 'git-mark-file) - (define-key map "M" 'git-mark-all) - (define-key map "n" 'git-next-file) - (define-key map "N" 'git-next-unmerged-file) - (define-key map "o" 'git-find-file-other-window) - (define-key map "p" 'git-prev-file) - (define-key map "P" 'git-prev-unmerged-file) - (define-key map "q" 'git-status-quit) - (define-key map "r" 'git-remove-file) - (define-key map "t" toggle-map) - (define-key map "T" 'git-toggle-all-marks) - (define-key map "u" 'git-unmark-file) - (define-key map "U" 'git-revert-file) - (define-key map "v" 'git-view-file) - (define-key map "x" 'git-remove-handled) - (define-key map "\C-?" 'git-unmark-file-up) - (define-key map "\M-\C-?" 'git-unmark-all) - ; the commit submap - (define-key commit-map "\C-a" 'git-amend-commit) - (define-key commit-map "\C-b" 'git-branch) - (define-key commit-map "\C-o" 'git-checkout) - (define-key commit-map "\C-p" 'git-cherry-pick-commit) - (define-key commit-map "\C-v" 'git-revert-commit) - ; the diff submap - (define-key diff-map "b" 'git-diff-file-base) - (define-key diff-map "c" 'git-diff-file-combined) - (define-key diff-map "=" 'git-diff-file) - (define-key diff-map "e" 'git-diff-file-idiff) - (define-key diff-map "E" 'git-find-file-imerge) - (define-key diff-map "h" 'git-diff-file-merge-head) - (define-key diff-map "m" 'git-diff-file-mine) - (define-key diff-map "o" 'git-diff-file-other) - ; the toggle submap - (define-key toggle-map "u" 'git-toggle-show-uptodate) - (define-key toggle-map "i" 'git-toggle-show-ignored) - (define-key toggle-map "k" 'git-toggle-show-unknown) - (define-key toggle-map "m" 'git-toggle-all-marks) - (setq git-status-mode-map map)) - (easy-menu-define git-menu git-status-mode-map - "Git Menu" - `("Git" - ["Refresh" git-refresh-status t] - ["Commit" git-commit-file t] - ["Checkout..." git-checkout t] - ["New Branch..." git-branch t] - ["Cherry-pick Commit..." git-cherry-pick-commit t] - ["Revert Commit..." git-revert-commit t] - ("Merge" - ["Next Unmerged File" git-next-unmerged-file t] - ["Prev Unmerged File" git-prev-unmerged-file t] - ["Interactive Merge File" git-find-file-imerge t] - ["Diff Against Common Base File" git-diff-file-base t] - ["Diff Combined" git-diff-file-combined t] - ["Diff Against Merge Head" git-diff-file-merge-head t] - ["Diff Against Mine" git-diff-file-mine t] - ["Diff Against Other" git-diff-file-other t]) - "--------" - ["Add File" git-add-file t] - ["Revert File" git-revert-file t] - ["Ignore File" git-ignore-file t] - ["Remove File" git-remove-file t] - ["Insert File" git-insert-file t] - "--------" - ["Find File" git-find-file t] - ["View File" git-view-file t] - ["Diff File" git-diff-file t] - ["Interactive Diff File" git-diff-file-idiff t] - ["Log" git-log-file t] - "--------" - ["Mark" git-mark-file t] - ["Mark All" git-mark-all t] - ["Unmark" git-unmark-file t] - ["Unmark All" git-unmark-all t] - ["Toggle All Marks" git-toggle-all-marks t] - ["Hide Handled Files" git-remove-handled t] - "--------" - ["Show Uptodate Files" git-toggle-show-uptodate :style toggle :selected git-show-uptodate] - ["Show Ignored Files" git-toggle-show-ignored :style toggle :selected git-show-ignored] - ["Show Unknown Files" git-toggle-show-unknown :style toggle :selected git-show-unknown] - "--------" - ["Quit" git-status-quit t]))) - - -;; git mode should only run in the *git status* buffer -(put 'git-status-mode 'mode-class 'special) - -(defun git-status-mode () - "Major mode for interacting with Git. -Commands: -\\{git-status-mode-map}" - (kill-all-local-variables) - (buffer-disable-undo) - (setq mode-name "git status" - major-mode 'git-status-mode - goal-column 17 - buffer-read-only t) - (use-local-map git-status-mode-map) - (let ((buffer-read-only nil)) - (erase-buffer) - (let ((status (ewoc-create 'git-fileinfo-prettyprint "" ""))) - (set (make-local-variable 'git-status) status)) - (set (make-local-variable 'list-buffers-directory) default-directory) - (make-local-variable 'git-show-uptodate) - (make-local-variable 'git-show-ignored) - (make-local-variable 'git-show-unknown) - (run-hooks 'git-status-mode-hook))) - -(defun git-find-status-buffer (dir) - "Find the git status buffer handling a specified directory." - (let ((list (buffer-list)) - (fulldir (expand-file-name dir)) - found) - (while (and list (not found)) - (let ((buffer (car list))) - (with-current-buffer buffer - (when (and list-buffers-directory - (string-equal fulldir (expand-file-name list-buffers-directory)) - (eq major-mode 'git-status-mode)) - (setq found buffer)))) - (setq list (cdr list))) - found)) - -(defun git-status (dir) - "Entry point into git-status mode." - (interactive "DSelect directory: ") - (setq dir (git-get-top-dir dir)) - (if (file-exists-p (concat (file-name-as-directory dir) ".git")) - (let ((buffer (or (and git-reuse-status-buffer (git-find-status-buffer dir)) - (create-file-buffer (expand-file-name "*git-status*" dir))))) - (switch-to-buffer buffer) - (cd dir) - (git-status-mode) - (git-refresh-status) - (goto-char (point-min)) - (add-hook 'after-save-hook 'git-update-saved-file)) - (message "%s is not a git working tree." dir))) - -(defun git-update-saved-file () - "Update the corresponding git-status buffer when a file is saved. -Meant to be used in `after-save-hook'." - (let* ((file (expand-file-name buffer-file-name)) - (dir (condition-case nil (git-get-top-dir (file-name-directory file)) (error nil))) - (buffer (and dir (git-find-status-buffer dir)))) - (when buffer - (with-current-buffer buffer - (let ((filename (file-relative-name file dir))) - ; skip files located inside the .git directory - (unless (string-match "^\\.git/" filename) - (git-call-process nil "add" "--refresh" "--" filename) - (git-update-status-files (list filename)))))))) - -(defun git-help () - "Display help for Git mode." - (interactive) - (describe-function 'git-status-mode)) - -(provide 'git) -;;; git.el ends here -- 2.15.1.424.g9478a66081 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH v2] git{,-blame}.el: remove old bitrotting Emacs code 2018-03-10 12:30 ` [PATCH v2] " Ævar Arnfjörð Bjarmason @ 2018-03-10 16:50 ` Martin Ågren 2018-03-13 18:40 ` Junio C Hamano 0 siblings, 1 reply; 26+ messages in thread From: Martin Ågren @ 2018-03-10 16:50 UTC (permalink / raw) To: Ævar Arnfjörð Bjarmason Cc: Git Mailing List, Junio C Hamano, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal On 10 March 2018 at 13:30, Ævar Arnfjörð Bjarmason <avarab@gmail.com> wrote: > diff --git a/contrib/emacs/README b/contrib/emacs/README > index 82368bdbff..5a63109458 100644 > --- a/contrib/emacs/README > +++ b/contrib/emacs/README > @@ -1,30 +1,24 @@ > -This directory contains various modules for Emacs support. > +This directory used to contain various modules for Emacs support. > > -To make the modules available to Emacs, you should add this directory > -to your load-path, and then require the modules you want. This can be > -done by adding to your .emacs something like this: > +These were added shortly after Git was first released, since then s/, since/. Since/ ? > +Emacs's own support for Git got better than what was offered by these > +modules, or was superseded by popular 3rd-party Git modes such as > +Magit. This somehow reads like "Emacs's own support ... was superseded ...". Maybe that's what you mean, but i'm not sure. Perhaps s/, was superseded by/. There are also/. > * git.el: > > - Status manager that displays the state of all the files of the > - project, and provides easy access to the most frequently used git > - commands. The user interface is as far as possible compatible with > - the pcl-cvs mode. It can be started with `M-x git-status'. > + Wrapper for "git status" that provided access to other git commands. > + > + Modern alternatives to this are Magit, or the VC mode that ships > + with Emacs. s/, or/ and/ ? My thinking: "A and B are modern alternatives", not "A or B are modern alternatives.". > * git-blame.el: > > - Emacs implementation of incremental git-blame. When you turn it on > - while viewing a file, the editor buffer will be updated by setting > - the background of individual lines to a color that reflects which > - commit it comes from. And when you move around the buffer, a > - one-line summary will be shown in the echo area. > + A wrapper for "git blame" written before Emacs's own vc-annotate > + mode learned to invoke git-blame, which can be done via C-x v g. Thanks for giving constructive hints. :-) Martin ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] git{,-blame}.el: remove old bitrotting Emacs code 2018-03-10 16:50 ` Martin Ågren @ 2018-03-13 18:40 ` Junio C Hamano 0 siblings, 0 replies; 26+ messages in thread From: Junio C Hamano @ 2018-03-13 18:40 UTC (permalink / raw) To: Martin Ågren Cc: Ævar Arnfjörð Bjarmason, Git Mailing List, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal Martin Ågren <martin.agren@gmail.com> writes: >> +Emacs's own support for Git got better than what was offered by these >> +modules, or was superseded by popular 3rd-party Git modes such as >> +Magit. > > This somehow reads like "Emacs's own support ... was superseded ...". > Maybe that's what you mean, but i'm not sure. Perhaps s/, was superseded > by/. There are also/. I think "There are also" is way better. If we really want to sy superseded, perhaps "The features these modules offered were superseded by Emacs's own support in VC mode, and popular third-party Git modes e.g. Magit" is what we can say. ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH] git{,-blame}.el: remove old bitrotting Emacs code 2018-03-08 9:45 ` [PATCH] git{,-blame}.el: remove old bitrotting Emacs code Ævar Arnfjörð Bjarmason 2018-03-08 17:27 ` Junio C Hamano @ 2018-03-08 17:55 ` Kyle Meyer 1 sibling, 0 replies; 26+ messages in thread From: Kyle Meyer @ 2018-03-08 17:55 UTC (permalink / raw) To: Ævar Arnfjörð Bjarmason Cc: git, Junio C Hamano, Alexandre Julliard, Dorab Patel, Eric Sunshine, David Kågedal Ævar Arnfjörð Bjarmason <avarab@gmail.com> writes: [...] > These days these modes have very few if users, and users of git aren't s/if// or s/if/if any/ ? -- Kyle ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v2] git.el: handle default excludesfile properly 2018-03-03 3:48 [PATCH] git.el: handle default excludesfile properly Dorab Patel 2018-03-03 8:42 ` Eric Sunshine @ 2018-03-06 4:38 ` Dorab Patel 1 sibling, 0 replies; 26+ messages in thread From: Dorab Patel @ 2018-03-06 4:38 UTC (permalink / raw) To: Git List; +Cc: Eric Sunshine, Alexandre Julliard, Dorab Patel The previous version only looked at core.excludesfile for locating the excludesfile. So, when core.excludesfile was not defined, it did not use the relevant default locations for the global excludes file. The issue is in git-get-exclude-files(). Investigation shows that git-get-exclude-files() is only called from git-run-ls-files-with-excludes(). Modifying git-run-ls-files-with-excludes() to use the "--exclude-standard" option to git-run-ls-files() obviates the need for git-get-exclude-files() altogether, which is now removed. In addition, the "--exclude-per-directory" option to git-run-ls-files() is used only when git-per-dir-ignore-file is not the default (.gitignore), since the default case is handled by the "--exclude-standard" option. Looking at the history shows that git-get-exclude-files() was implemented by commit 274e13e0e9 (git.el: Take into account the core.excludesfile config option., 2007-07-31), whereas the "--exclude-standard" option was introduced by commit 8e7b07c8a7 (git-ls-files: add --exclude-standard, 2007-11-15), three and a half months later. This explains why the "--exclude-standard" option was not used in the original code. Signed-off-by: Dorab Patel <dorabpatel@gmail.com> --- Notes: The original patch[1] V1 attempted to add code to git-get-exclude-files() to handle the case when core.excludesfile was not defined. This involved code to check for the env variable XDG_CONFIG_HOME and related processing to find the value of the default excludesfile. Further investigation showed that using the "--exclude-standard" option to git-run-ls-files-with-excludes() already does similar processing. Hence the V2 patch uses the "--exclude-standard" option and does away with git-get-exclude-files(). [1] https://public-inbox.org/git/20180303034803.21589-1-dorabpatel@gmail.com/ contrib/emacs/git.el | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index 97919f2d7..cef42f1de 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -755,22 +755,13 @@ Return the list of files that haven't been handled." (setq unmerged-files (nreverse unmerged-files)) ;; assume it is sorted already (git-set-filenames-state status unmerged-files 'unmerged)))) -(defun git-get-exclude-files () - "Get the list of exclude files to pass to git-ls-files." - (let (files - (config (git-config "core.excludesfile"))) - (when (file-readable-p ".git/info/exclude") - (push ".git/info/exclude" files)) - (when (and config (file-readable-p config)) - (push config files)) - files)) - (defun git-run-ls-files-with-excludes (status files default-state &rest options) - "Run git-ls-files on FILES with appropriate --exclude-from options." - (let ((exclude-files (git-get-exclude-files))) - (apply #'git-run-ls-files status files default-state "--directory" "--no-empty-directory" - (concat "--exclude-per-directory=" git-per-dir-ignore-file) - (append options (mapcar (lambda (f) (concat "--exclude-from=" f)) exclude-files))))) + "Run git-ls-files on FILES with appropriate exclude options." + (apply #'git-run-ls-files status files default-state + "--directory" "--no-empty-directory" "--exclude-standard" + (append (unless (string-equal git-per-dir-ignore-file ".gitignore") ; handled by --exclude-standard + (list (concat "--exclude-per-directory=" git-per-dir-ignore-file))) + options))) (defun git-update-status-files (&optional files mark-files) "Update the status of FILES from the index. -- 2.16.2 ^ permalink raw reply related [flat|nested] 26+ messages in thread
end of thread, other threads:[~2018-04-18 20:16 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <EKzyQbDEJGG4Lm5YboF8xg@mail.gmail.com>
2018-03-10 18:45 ` [PATCH v3] git{,-blame}.el: remove old bitrotting Emacs code Ævar Arnfjörð Bjarmason
2018-03-13 18:53 ` [PATCH v2] " Ævar Arnfjörð Bjarmason
2018-03-13 22:14 ` Junio C Hamano
2018-03-27 16:57 ` [PATCH v3] " Jonathan Nieder
2018-04-11 20:42 ` [PATCH v4] " Ævar Arnfjörð Bjarmason
2018-04-12 2:19 ` Junio C Hamano
2018-04-12 6:52 ` Ævar Arnfjörð Bjarmason
2018-04-12 9:23 ` Junio C Hamano
2018-04-18 20:16 ` Todd Zullinger
2018-03-03 3:48 [PATCH] git.el: handle default excludesfile properly Dorab Patel
2018-03-03 8:42 ` Eric Sunshine
2018-03-04 1:36 ` Dorab Patel
2018-03-04 2:12 ` Eric Sunshine
2018-03-04 2:57 ` Dorab Patel
2018-03-04 4:34 ` Eric Sunshine
2018-03-05 2:36 ` Junio C Hamano
2018-03-06 11:54 ` Alexandre Julliard
2018-03-07 21:52 ` Dorab Patel
2018-03-08 9:41 ` Ævar Arnfjörð Bjarmason
2018-03-08 9:45 ` [PATCH] git{,-blame}.el: remove old bitrotting Emacs code Ævar Arnfjörð Bjarmason
2018-03-08 17:27 ` Junio C Hamano
2018-03-10 12:30 ` [PATCH v2] " Ævar Arnfjörð Bjarmason
2018-03-10 16:50 ` Martin Ågren
2018-03-13 18:40 ` Junio C Hamano
2018-03-08 17:55 ` [PATCH] " Kyle Meyer
2018-03-06 4:38 ` [PATCH v2] git.el: handle default excludesfile properly Dorab Patel
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.