[PATCH v4 00/14] Enable SD/MMC on JZ4780 SoCs

[PATCH v4 00/14] Enable SD/MMC on JZ4780 SoCs

[Ezequiel Garcia]

This patchset adds support for SD/MMC on JZ4780 based
platforms, such as the MIPS Creator CI20 board.

Most of the work has been done by Alex, Paul and Zubair,
while I've only prepared the upstream submission, cleaned
some patches, and written some commit logs where needed.

All praises should go to them, all rants to me.

The series is based on v4.16-rc6.

Changes from v3:
  * Replaced callbacks with if/else magic to handle
    the different register widths on versions of the SoC.

Changes from v2:
  * Fix commit log in "mmc: dt-bindings: add MMC support to JZ4740 SoC"

Changes from v1:
  * Reordered patches, fixes first, for easier backporting.
  * Added Link and Fixes tags to patch "Fix race condition",
    for easier backporting.
  * Enabled the DMA in the dtsi for jz4780, dropped it from the ci20 dts.
  * Reworded config and help user visible text.
  * Reworded commit logs, using imperative.
  * Re-authored my patches, as Collabora is partially
    sponsoring them.


Alex Smith (3):
  mmc: jz4740: Fix race condition in IRQ mask update
  mmc: jz4740: Set clock rate to mmc->f_max rather than JZ_MMC_CLK_RATE
  mmc: jz4740: Add support for the JZ4780

Ezequiel Garcia (10):
  mmc: jz4780: Order headers alphabetically
  mmc: jz4740: Use dev_get_platdata
  mmc: jz4740: Introduce devicetree probe
  mmc: dt-bindings: add MMC support to JZ4740 SoC
  mmc: jz4740: Use dma_request_chan()
  MIPS: dts: jz4780: Add DMA controller node to the devicetree
  MIPS: dts: jz4780: Add MMC controller node to the devicetree
  MIPS: dts: ci20: Enable MMC in the devicetree
  MIPS: configs: ci20: Enable DMA and MMC support
  MIPS: configs: ci20: Enable ext4

Paul Cercueil (1):
  mmc: jz4740: Fix error exit path in driver's probe

Zubair Lutfullah Kakakhel (1):
  mmc: jz4740: Reset the device requesting the interrupt

 Documentation/devicetree/bindings/mmc/jz4740.txt |  38 +++++
 arch/mips/boot/dts/ingenic/ci20.dts              |  34 ++++
 arch/mips/boot/dts/ingenic/jz4780.dtsi           |  52 ++++++
 arch/mips/configs/ci20_defconfig                 |   4 +
 drivers/mmc/host/Kconfig                         |   9 +-
 drivers/mmc/host/jz4740_mmc.c                    | 205 +++++++++++++++--------
 include/dt-bindings/dma/jz4780-dma.h             |  49 ++++++
 7 files changed, 321 insertions(+), 70 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/jz4740.txt
 create mode 100644 include/dt-bindings/dma/jz4780-dma.h

-- 
2.16.2

[PATCH v4 01/15] mmc: jz4740: Fix race condition in IRQ mask update

[Ezequiel Garcia]

From: Alex Smith <alex.smith@imgtec.com>

A spinlock is held while updating the internal copy of the IRQ mask,
but not while writing it to the actual IMASK register. After the lock
is released, an IRQ can occur before the IMASK register is written.
If handling this IRQ causes the mask to be changed, when the handler
returns back to the middle of the first mask update, a stale value
will be written to the mask register.

If this causes an IRQ to become unmasked that cannot have its status
cleared by writing a 1 to it in the IREG register, e.g. the SDIO IRQ,
then we can end up stuck with the same IRQ repeatedly being fired but
not handled. Normally the MMC IRQ handler attempts to clear any
unexpected IRQs by writing IREG, but for those that cannot be cleared
in this way then the IRQ will just repeatedly fire.

This was resulting in lockups after a while of using Wi-Fi on the
CI20 (GitHub issue #19).

Resolve by holding the spinlock until after the IMASK register has
been updated.

Cc: stable@vger.kernel.org
Link: https://github.com/MIPS/CI20_linux/issues/19
Fixes: 61bfbdb85687 ("MMC: Add support for the controller on JZ4740 SoCs.")
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
---
 drivers/mmc/host/jz4740_mmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 712e08d9a45e..a0168e9e4fce 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -362,9 +362,9 @@ static void jz4740_mmc_set_irq_enabled(struct jz4740_mmc_host *host,
 		host->irq_mask &= ~irq;
 	else
 		host->irq_mask |= irq;
-	spin_unlock_irqrestore(&host->lock, flags);
 
 	writew(host->irq_mask, host->base + JZ_REG_MMC_IMASK);
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
 static void jz4740_mmc_clock_enable(struct jz4740_mmc_host *host,
-- 
2.16.2

[PATCH v4 02/15] mmc: jz4740: Fix error exit path in driver's probe

[Ezequiel Garcia]

From: Paul Cercueil <paul@crapouillou.net>

Currently, if jz4740_mmc_request_gpios() fails, the driver
tries to release DMA resources. This is wrong because DMA
is requested at a later stage.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[Ezequiel: cleanup commit message]
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 drivers/mmc/host/jz4740_mmc.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index a0168e9e4fce..97727cd34fc1 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -1006,7 +1006,7 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 
 	ret = jz4740_mmc_request_gpios(mmc, pdev);
 	if (ret)
-		goto err_release_dma;
+		goto err_free_host;
 
 	mmc->ops = &jz4740_mmc_ops;
 	mmc->f_min = JZ_MMC_CLK_RATE / 128;
@@ -1038,16 +1038,17 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 	jz4740_mmc_clock_disable(host);
 	timer_setup(&host->timeout_timer, jz4740_mmc_timeout, 0);
 
-	host->use_dma = true;
-	if (host->use_dma && jz4740_mmc_acquire_dma_channels(host) != 0)
-		host->use_dma = false;
+	ret = jz4740_mmc_acquire_dma_channels(host);
+	if (ret == -EPROBE_DEFER)
+		goto err_free_irq;
+	host->use_dma = !ret;
 
 	platform_set_drvdata(pdev, host);
 	ret = mmc_add_host(mmc);
 
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to add mmc host: %d\n", ret);
-		goto err_free_irq;
+		goto err_release_dma;
 	}
 	dev_info(&pdev->dev, "JZ SD/MMC card driver registered\n");
 
@@ -1057,13 +1058,13 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 
 	return 0;
 
+err_release_dma:
+	if (host->use_dma)
+		jz4740_mmc_release_dma_channels(host);
 err_free_irq:
 	free_irq(host->irq, host);
 err_free_gpios:
 	jz4740_mmc_free_gpios(pdev);
-err_release_dma:
-	if (host->use_dma)
-		jz4740_mmc_release_dma_channels(host);
 err_free_host:
 	mmc_free_host(mmc);
 
-- 
2.16.2

[PATCH v4 03/15] mmc: jz4780: Order headers alphabetically

[Ezequiel Garcia]

From: Ezequiel Garcia <ezequiel@collabora.co.uk>

Just a minor cleanup to order the headers alphabetically.
This helps prevent merge conflicts.

Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 drivers/mmc/host/jz4740_mmc.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 97727cd34fc1..eb57f514a459 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -13,24 +13,24 @@
  *
  */
 
-#include <linux/mmc/host.h>
-#include <linux/mmc/slot-gpio.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/interrupt.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
-#include <linux/delay.h>
 #include <linux/scatterlist.h>
-#include <linux/clk.h>
 
-#include <linux/bitops.h>
-#include <linux/gpio.h>
 #include <asm/cacheflush.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
 
 #include <asm/mach-jz4740/dma.h>
 #include <asm/mach-jz4740/jz4740_mmc.h>
-- 
2.16.2

[PATCH v4 04/15] mmc: jz4740: Use dev_get_platdata

[Ezequiel Garcia]

From: Ezequiel Garcia <ezequiel@collabora.co.uk>

Instead of accessing the platform data pointer directly,
use the dev_get_platdata() helper.

Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 drivers/mmc/host/jz4740_mmc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index eb57f514a459..b11f65077ce7 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -926,7 +926,7 @@ static int jz4740_mmc_request_gpio(struct device *dev, int gpio,
 static int jz4740_mmc_request_gpios(struct mmc_host *mmc,
 	struct platform_device *pdev)
 {
-	struct jz4740_mmc_platform_data *pdata = pdev->dev.platform_data;
+	struct jz4740_mmc_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	int ret = 0;
 
 	if (!pdata)
@@ -955,7 +955,7 @@ static int jz4740_mmc_request_gpios(struct mmc_host *mmc,
 
 static void jz4740_mmc_free_gpios(struct platform_device *pdev)
 {
-	struct jz4740_mmc_platform_data *pdata = pdev->dev.platform_data;
+	struct jz4740_mmc_platform_data *pdata = dev_get_platdata(&pdev->dev);
 
 	if (!pdata)
 		return;
@@ -971,7 +971,7 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 	struct jz4740_mmc_host *host;
 	struct jz4740_mmc_platform_data *pdata;
 
-	pdata = pdev->dev.platform_data;
+	pdata = dev_get_platdata(&pdev->dev);
 
 	mmc = mmc_alloc_host(sizeof(struct jz4740_mmc_host), &pdev->dev);
 	if (!mmc) {
-- 
2.16.2

[PATCH v4 05/15] mmc: jz4740: Reset the device requesting the interrupt

[Ezequiel Garcia]

From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>

In case a bootloader leaves the device in a bad state,
requesting the interrupt before resetting results in a bad
interrupt loop.

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
[Ezequiel: cleanup commit description]
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 drivers/mmc/host/jz4740_mmc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index b11f65077ce7..9f316d953b30 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -1027,6 +1027,8 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 	spin_lock_init(&host->lock);
 	host->irq_mask = 0xffff;
 
+	jz4740_mmc_reset(host);
+
 	ret = request_threaded_irq(host->irq, jz_mmc_irq, jz_mmc_irq_worker, 0,
 			dev_name(&pdev->dev), host);
 	if (ret) {
@@ -1034,7 +1036,6 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 		goto err_free_gpios;
 	}
 
-	jz4740_mmc_reset(host);
 	jz4740_mmc_clock_disable(host);
 	timer_setup(&host->timeout_timer, jz4740_mmc_timeout, 0);
 
-- 
2.16.2

[PATCH v4 06/15] mmc: jz4740: Introduce devicetree probe

[Ezequiel Garcia]

From: Ezequiel Garcia <ezequiel@collabora.co.uk>

Add support to probe the device via devicetree, which
will be used to support other SoCs such as the JZ4780.

Based on commits from the CI20 repo, by Paul Cercueil
and Alex Smith. Binding document based on work by
Zubair Lutfullah Kakakhel.

Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 drivers/mmc/host/jz4740_mmc.c | 51 ++++++++++++++++++++++++++++++++++---------
 1 file changed, 41 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 9f316d953b30..03757cc55f52 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -26,6 +26,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/slot-gpio.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/scatterlist.h>
@@ -107,6 +108,10 @@
 
 #define JZ_MMC_CLK_RATE 24000000
 
+enum jz4740_mmc_version {
+	JZ_MMC_JZ4740,
+};
+
 enum jz4740_mmc_state {
 	JZ4740_MMC_STATE_READ_RESPONSE,
 	JZ4740_MMC_STATE_TRANSFER_DATA,
@@ -125,6 +130,8 @@ struct jz4740_mmc_host {
 	struct jz4740_mmc_platform_data *pdata;
 	struct clk *clk;
 
+	enum jz4740_mmc_version version;
+
 	int irq;
 	int card_detect_irq;
 
@@ -857,7 +864,7 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	switch (ios->power_mode) {
 	case MMC_POWER_UP:
 		jz4740_mmc_reset(host);
-		if (gpio_is_valid(host->pdata->gpio_power))
+		if (host->pdata && gpio_is_valid(host->pdata->gpio_power))
 			gpio_set_value(host->pdata->gpio_power,
 					!host->pdata->power_active_low);
 		host->cmdat |= JZ_MMC_CMDAT_INIT;
@@ -866,7 +873,7 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_ON:
 		break;
 	default:
-		if (gpio_is_valid(host->pdata->gpio_power))
+		if (host->pdata && gpio_is_valid(host->pdata->gpio_power))
 			gpio_set_value(host->pdata->gpio_power,
 					host->pdata->power_active_low);
 		clk_disable_unprepare(host->clk);
@@ -964,11 +971,18 @@ static void jz4740_mmc_free_gpios(struct platform_device *pdev)
 		gpio_free(pdata->gpio_power);
 }
 
+static const struct of_device_id jz4740_mmc_of_match[] = {
+	{ .compatible = "ingenic,jz4740-mmc", .data = (void *) JZ_MMC_JZ4740 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4740_mmc_of_match);
+
 static int jz4740_mmc_probe(struct platform_device* pdev)
 {
 	int ret;
 	struct mmc_host *mmc;
 	struct jz4740_mmc_host *host;
+	const struct of_device_id *match;
 	struct jz4740_mmc_platform_data *pdata;
 
 	pdata = dev_get_platdata(&pdev->dev);
@@ -982,6 +996,27 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 	host = mmc_priv(mmc);
 	host->pdata = pdata;
 
+	match = of_match_device(jz4740_mmc_of_match, &pdev->dev);
+	if (match) {
+		host->version = (enum jz4740_mmc_version)match->data;
+		ret = mmc_of_parse(mmc);
+		if (ret) {
+			if (ret != -EPROBE_DEFER)
+				dev_err(&pdev->dev,
+					"could not parse of data: %d\n", ret);
+			goto err_free_host;
+		}
+	} else {
+		/* JZ4740 should be the only one using legacy probe */
+		host->version = JZ_MMC_JZ4740;
+		mmc->caps |= MMC_CAP_SDIO_IRQ;
+		if (!(pdata && pdata->data_1bit))
+			mmc->caps |= MMC_CAP_4_BIT_DATA;
+		ret = jz4740_mmc_request_gpios(mmc, pdev);
+		if (ret)
+			goto err_free_host;
+	}
+
 	host->irq = platform_get_irq(pdev, 0);
 	if (host->irq < 0) {
 		ret = host->irq;
@@ -1004,16 +1039,11 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 		goto err_free_host;
 	}
 
-	ret = jz4740_mmc_request_gpios(mmc, pdev);
-	if (ret)
-		goto err_free_host;
-
 	mmc->ops = &jz4740_mmc_ops;
-	mmc->f_min = JZ_MMC_CLK_RATE / 128;
-	mmc->f_max = JZ_MMC_CLK_RATE;
+	if (!mmc->f_max)
+		mmc->f_max = JZ_MMC_CLK_RATE;
+	mmc->f_min = mmc->f_max / 128;
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-	mmc->caps = (pdata && pdata->data_1bit) ? 0 : MMC_CAP_4_BIT_DATA;
-	mmc->caps |= MMC_CAP_SDIO_IRQ;
 
 	mmc->max_blk_size = (1 << 10) - 1;
 	mmc->max_blk_count = (1 << 15) - 1;
@@ -1118,6 +1148,7 @@ static struct platform_driver jz4740_mmc_driver = {
 	.remove = jz4740_mmc_remove,
 	.driver = {
 		.name = "jz4740-mmc",
+		.of_match_table = of_match_ptr(jz4740_mmc_of_match),
 		.pm = JZ4740_MMC_PM_OPS,
 	},
 };
-- 
2.16.2

[PATCH v4 07/15] mmc: dt-bindings: add MMC support to JZ4740 SoC

[Ezequiel Garcia]

From: Ezequiel Garcia <ezequiel@collabora.co.uk>

Add the devicetree binding for JZ4740/JZ4780 SoC MMC/SD controller.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 Documentation/devicetree/bindings/mmc/jz4740.txt | 38 ++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/jz4740.txt

diff --git a/Documentation/devicetree/bindings/mmc/jz4740.txt b/Documentation/devicetree/bindings/mmc/jz4740.txt
new file mode 100644
index 000000000000..7cd8c432d7c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/jz4740.txt
@@ -0,0 +1,38 @@
+* Ingenic JZ47xx MMC controllers
+
+This file documents the device tree properties used for the MMC controller in
+Ingenic JZ4740/JZ4780 SoCs. These are in addition to the core MMC properties
+described in mmc.txt.
+
+Required properties:
+- compatible: Should be one of the following:
+  - "ingenic,jz4740-mmc" for the JZ4740
+  - "ingenic,jz4780-mmc" for the JZ4780
+- reg: Should contain the MMC controller registers location and length.
+- interrupts: Should contain the interrupt specifier of the MMC controller.
+- clocks: Clock for the MMC controller.
+
+Optional properties:
+- dmas: List of DMA specifiers with the controller specific format
+        as described in the generic DMA client binding. A tx and rx
+        specifier is required.
+- dma-names: RX and TX  DMA request names.
+        Should be "rx" and "tx", in that order.
+
+For additional details on DMA client bindings see ../dma/dma.txt.
+
+Example:
+
+mmc0: mmc@13450000 {
+	compatible = "ingenic,jz4780-mmc";
+	reg = <0x13450000 0x1000>;
+
+	interrupt-parent = <&intc>;
+	interrupts = <37>;
+
+	clocks = <&cgu JZ4780_CLK_MSC0>;
+	clock-names = "mmc";
+
+	dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>, <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
+	dma-names = "rx", "tx";
+};
-- 
2.16.2

[PATCH v4 08/15] mmc: jz4740: Set clock rate to mmc->f_max rather than JZ_MMC_CLK_RATE

[Ezequiel Garcia]

From: Alex Smith <alex.smith@imgtec.com>

The maximum clock rate can be overridden by DT. The clock rate should
be set to the DT-specified value rather than the constant JZ_MMC_CLK_RATE
when this is done. If the maximum clock rate is not set by DT then
mmc->f_max will be set to JZ_MMC_CLK_RATE.

Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
---
 drivers/mmc/host/jz4740_mmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 03757cc55f52..aa635b458d2c 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -825,7 +825,7 @@ static int jz4740_mmc_set_clock_rate(struct jz4740_mmc_host *host, int rate)
 	int real_rate;
 
 	jz4740_mmc_clock_disable(host);
-	clk_set_rate(host->clk, JZ_MMC_CLK_RATE);
+	clk_set_rate(host->clk, host->mmc->f_max);
 
 	real_rate = clk_get_rate(host->clk);
 
-- 
2.16.2

[PATCH v4 09/15] mmc: jz4740: Add support for the JZ4780

[Ezequiel Garcia]

From: Alex Smith <alex.smith@imgtec.com>

Add support for the JZ4780 MMC controller to the jz47xx_mmc driver. There
are a few minor differences from the 4740 to the 4780 that need to be
handled, but otherwise the controllers behave the same. The IREG and IMASK
registers are expanded to 32 bits. Additionally, some error conditions are
now reported in both STATUS and IREG. Writing IREG before reading STATUS
causes the bits in STATUS to be cleared, so STATUS must be read first to
ensure we see and report error conditions correctly.

Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 drivers/mmc/host/Kconfig      |  9 +++--
 drivers/mmc/host/jz4740_mmc.c | 86 +++++++++++++++++++++++++++++++++----------
 2 files changed, 72 insertions(+), 23 deletions(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 620c2d90a646..35a5a5ad65b9 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -766,11 +766,12 @@ config MMC_SH_MMCIF
 
 
 config MMC_JZ4740
-	tristate "JZ4740 SD/Multimedia Card Interface support"
-	depends on MACH_JZ4740
+	tristate "Ingenic JZ47xx SD/Multimedia Card Interface support"
+	depends on MACH_JZ4740 || MACH_JZ4780
 	help
-	  This selects support for the SD/MMC controller on Ingenic JZ4740
-	  SoCs.
+	  This selects support for the SD/MMC controller on Ingenic
+	  JZ4740, JZ4750, JZ4770 and JZ4780 SoCs.
+
 	  If you have a board based on such a SoC and with a SD/MMC slot,
 	  say Y or M here.
 
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index aa635b458d2c..5d3efd59bda1 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -1,5 +1,7 @@
 /*
  *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  Copyright (C) 2013, Imagination Technologies
+ *
  *  JZ4740 SD/MMC controller driver
  *
  *  This program is free software; you can redistribute  it and/or modify it
@@ -52,6 +54,7 @@
 #define JZ_REG_MMC_RESP_FIFO	0x34
 #define JZ_REG_MMC_RXFIFO	0x38
 #define JZ_REG_MMC_TXFIFO	0x3C
+#define JZ_REG_MMC_DMAC		0x44
 
 #define JZ_MMC_STRPCL_EXIT_MULTIPLE BIT(7)
 #define JZ_MMC_STRPCL_EXIT_TRANSFER BIT(6)
@@ -105,11 +108,15 @@
 #define JZ_MMC_IRQ_PRG_DONE BIT(1)
 #define JZ_MMC_IRQ_DATA_TRAN_DONE BIT(0)
 
+#define JZ_MMC_DMAC_DMA_SEL BIT(1)
+#define JZ_MMC_DMAC_DMA_EN BIT(0)
 
 #define JZ_MMC_CLK_RATE 24000000
 
 enum jz4740_mmc_version {
 	JZ_MMC_JZ4740,
+	JZ_MMC_JZ4750,
+	JZ_MMC_JZ4780,
 };
 
 enum jz4740_mmc_state {
@@ -144,7 +151,7 @@ struct jz4740_mmc_host {
 
 	uint32_t cmdat;
 
-	uint16_t irq_mask;
+	uint32_t irq_mask;
 
 	spinlock_t lock;
 
@@ -166,6 +173,32 @@ struct jz4740_mmc_host {
 #define JZ4740_MMC_FIFO_HALF_SIZE 8
 };
 
+static void jz4740_mmc_write_irq_mask(struct jz4740_mmc_host *host,
+				      uint32_t val)
+{
+	if (host->version >= JZ_MMC_JZ4750)
+		return writel(val, host->base + JZ_REG_MMC_IMASK);
+	else
+		return writew(val, host->base + JZ_REG_MMC_IMASK);
+}
+
+static void jz4740_mmc_write_irq_reg(struct jz4740_mmc_host *host,
+				     uint32_t val)
+{
+	if (host->version >= JZ_MMC_JZ4780)
+		return writel(val, host->base + JZ_REG_MMC_IREG);
+	else
+		return writew(val, host->base + JZ_REG_MMC_IREG);
+}
+
+static uint32_t jz4740_mmc_read_irq_reg(struct jz4740_mmc_host *host)
+{
+	if (host->version >= JZ_MMC_JZ4780)
+		return readl(host->base + JZ_REG_MMC_IREG);
+	else
+		return readw(host->base + JZ_REG_MMC_IREG);
+}
+
 /*----------------------------------------------------------------------------*/
 /* DMA infrastructure */
 
@@ -370,7 +403,7 @@ static void jz4740_mmc_set_irq_enabled(struct jz4740_mmc_host *host,
 	else
 		host->irq_mask |= irq;
 
-	writew(host->irq_mask, host->base + JZ_REG_MMC_IMASK);
+	jz4740_mmc_write_irq_mask(host, host->irq_mask);
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
@@ -422,10 +455,10 @@ static unsigned int jz4740_mmc_poll_irq(struct jz4740_mmc_host *host,
 	unsigned int irq)
 {
 	unsigned int timeout = 0x800;
-	uint16_t status;
+	uint32_t status;
 
 	do {
-		status = readw(host->base + JZ_REG_MMC_IREG);
+		status = jz4740_mmc_read_irq_reg(host);
 	} while (!(status & irq) && --timeout);
 
 	if (timeout == 0) {
@@ -525,7 +558,7 @@ static bool jz4740_mmc_read_data(struct jz4740_mmc_host *host,
 	void __iomem *fifo_addr = host->base + JZ_REG_MMC_RXFIFO;
 	uint32_t *buf;
 	uint32_t d;
-	uint16_t status;
+	uint32_t status;
 	size_t i, j;
 	unsigned int timeout;
 
@@ -661,8 +694,25 @@ static void jz4740_mmc_send_command(struct jz4740_mmc_host *host,
 		cmdat |= JZ_MMC_CMDAT_DATA_EN;
 		if (cmd->data->flags & MMC_DATA_WRITE)
 			cmdat |= JZ_MMC_CMDAT_WRITE;
-		if (host->use_dma)
-			cmdat |= JZ_MMC_CMDAT_DMA_EN;
+		if (host->use_dma) {
+			/*
+			 * The 4780's MMC controller has integrated DMA ability
+			 * in addition to being able to use the external DMA
+			 * controller. It moves DMA control bits to a separate
+			 * register. The DMA_SEL bit chooses the external
+			 * controller over the integrated one. Earlier SoCs
+			 * can only use the external controller, and have a
+			 * single DMA enable bit in CMDAT.
+			 */
+			if (host->version >= JZ_MMC_JZ4780) {
+				writel(JZ_MMC_DMAC_DMA_EN | JZ_MMC_DMAC_DMA_SEL,
+				       host->base + JZ_REG_MMC_DMAC);
+			} else {
+				cmdat |= JZ_MMC_CMDAT_DMA_EN;
+			}
+		} else if (host->version >= JZ_MMC_JZ4780) {
+			writel(0, host->base + JZ_REG_MMC_DMAC);
+		}
 
 		writew(cmd->data->blksz, host->base + JZ_REG_MMC_BLKLEN);
 		writew(cmd->data->blocks, host->base + JZ_REG_MMC_NOB);
@@ -743,7 +793,7 @@ static irqreturn_t jz_mmc_irq_worker(int irq, void *devid)
 			host->state = JZ4740_MMC_STATE_SEND_STOP;
 			break;
 		}
-		writew(JZ_MMC_IRQ_DATA_TRAN_DONE, host->base + JZ_REG_MMC_IREG);
+		jz4740_mmc_write_irq_reg(host, JZ_MMC_IRQ_DATA_TRAN_DONE);
 
 	case JZ4740_MMC_STATE_SEND_STOP:
 		if (!req->stop)
@@ -773,9 +823,10 @@ static irqreturn_t jz_mmc_irq(int irq, void *devid)
 {
 	struct jz4740_mmc_host *host = devid;
 	struct mmc_command *cmd = host->cmd;
-	uint16_t irq_reg, status, tmp;
+	uint32_t irq_reg, status, tmp;
 
-	irq_reg = readw(host->base + JZ_REG_MMC_IREG);
+	status = readl(host->base + JZ_REG_MMC_STATUS);
+	irq_reg = jz4740_mmc_read_irq_reg(host);
 
 	tmp = irq_reg;
 	irq_reg &= ~host->irq_mask;
@@ -784,10 +835,10 @@ static irqreturn_t jz_mmc_irq(int irq, void *devid)
 		JZ_MMC_IRQ_PRG_DONE | JZ_MMC_IRQ_DATA_TRAN_DONE);
 
 	if (tmp != irq_reg)
-		writew(tmp & ~irq_reg, host->base + JZ_REG_MMC_IREG);
+		jz4740_mmc_write_irq_reg(host, tmp & ~irq_reg);
 
 	if (irq_reg & JZ_MMC_IRQ_SDIO) {
-		writew(JZ_MMC_IRQ_SDIO, host->base + JZ_REG_MMC_IREG);
+		jz4740_mmc_write_irq_reg(host, JZ_MMC_IRQ_SDIO);
 		mmc_signal_sdio_irq(host->mmc);
 		irq_reg &= ~JZ_MMC_IRQ_SDIO;
 	}
@@ -796,8 +847,6 @@ static irqreturn_t jz_mmc_irq(int irq, void *devid)
 		if (test_and_clear_bit(0, &host->waiting)) {
 			del_timer(&host->timeout_timer);
 
-			status = readl(host->base + JZ_REG_MMC_STATUS);
-
 			if (status & JZ_MMC_STATUS_TIMEOUT_RES) {
 					cmd->error = -ETIMEDOUT;
 			} else if (status & JZ_MMC_STATUS_CRC_RES_ERR) {
@@ -810,7 +859,7 @@ static irqreturn_t jz_mmc_irq(int irq, void *devid)
 			}
 
 			jz4740_mmc_set_irq_enabled(host, irq_reg, false);
-			writew(irq_reg, host->base + JZ_REG_MMC_IREG);
+			jz4740_mmc_write_irq_reg(host, irq_reg);
 
 			return IRQ_WAKE_THREAD;
 		}
@@ -844,9 +893,7 @@ static void jz4740_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
 
 	host->req = req;
 
-	writew(0xffff, host->base + JZ_REG_MMC_IREG);
-
-	writew(JZ_MMC_IRQ_END_CMD_RES, host->base + JZ_REG_MMC_IREG);
+	jz4740_mmc_write_irq_reg(host, ~0);
 	jz4740_mmc_set_irq_enabled(host, JZ_MMC_IRQ_END_CMD_RES, true);
 
 	host->state = JZ4740_MMC_STATE_READ_RESPONSE;
@@ -973,6 +1020,7 @@ static void jz4740_mmc_free_gpios(struct platform_device *pdev)
 
 static const struct of_device_id jz4740_mmc_of_match[] = {
 	{ .compatible = "ingenic,jz4740-mmc", .data = (void *) JZ_MMC_JZ4740 },
+	{ .compatible = "ingenic,jz4780-mmc", .data = (void *) JZ_MMC_JZ4780 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, jz4740_mmc_of_match);
@@ -1055,7 +1103,7 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 	host->mmc = mmc;
 	host->pdev = pdev;
 	spin_lock_init(&host->lock);
-	host->irq_mask = 0xffff;
+	host->irq_mask = ~0;
 
 	jz4740_mmc_reset(host);
 
-- 
2.16.2

[PATCH v4 10/15] mmc: jz4740: Use dma_request_chan()

[Ezequiel Garcia]

From: Ezequiel Garcia <ezequiel@collabora.co.uk>

Replace dma_request_channel() with dma_request_chan(),
which also supports probing from the devicetree.

Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 drivers/mmc/host/jz4740_mmc.c | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 5d3efd59bda1..993386c9ea50 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -213,31 +213,23 @@ static void jz4740_mmc_release_dma_channels(struct jz4740_mmc_host *host)
 
 static int jz4740_mmc_acquire_dma_channels(struct jz4740_mmc_host *host)
 {
-	dma_cap_mask_t mask;
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-
-	host->dma_tx = dma_request_channel(mask, NULL, host);
-	if (!host->dma_tx) {
+	host->dma_tx = dma_request_chan(mmc_dev(host->mmc), "tx");
+	if (IS_ERR(host->dma_tx)) {
 		dev_err(mmc_dev(host->mmc), "Failed to get dma_tx channel\n");
-		return -ENODEV;
+		return PTR_ERR(host->dma_tx);
 	}
 
-	host->dma_rx = dma_request_channel(mask, NULL, host);
-	if (!host->dma_rx) {
+	host->dma_rx = dma_request_chan(mmc_dev(host->mmc), "rx");
+	if (IS_ERR(host->dma_rx)) {
 		dev_err(mmc_dev(host->mmc), "Failed to get dma_rx channel\n");
-		goto free_master_write;
+		dma_release_channel(host->dma_tx);
+		return PTR_ERR(host->dma_rx);
 	}
 
 	/* Initialize DMA pre request cookie */
 	host->next_data.cookie = 1;
 
 	return 0;
-
-free_master_write:
-	dma_release_channel(host->dma_tx);
-	return -ENODEV;
 }
 
 static inline struct dma_chan *jz4740_mmc_get_dma_chan(struct jz4740_mmc_host *host,
-- 
2.16.2

[PATCH v4 11/15] MIPS: dts: jz4780: Add DMA controller node to the devicetree

[Ezequiel Garcia]

From: Ezequiel Garcia <ezequiel@collabora.co.uk>

Add the devicetree node to support the DMA controller found
in JZ480 SoCs.

Tested-by: Mathieu Malaterre <malat@debian.org>
Acked-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 arch/mips/boot/dts/ingenic/jz4780.dtsi | 12 +++++++++
 include/dt-bindings/dma/jz4780-dma.h   | 49 ++++++++++++++++++++++++++++++++++
 2 files changed, 61 insertions(+)
 create mode 100644 include/dt-bindings/dma/jz4780-dma.h

diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 9b5794667aee..15a9801430bd 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/clock/jz4780-cgu.h>
+#include <dt-bindings/dma/jz4780-dma.h>
 
 / {
 	#address-cells = <1>;
@@ -241,6 +242,17 @@
 		status = "disabled";
 	};
 
+	dma: dma@13420000 {
+		compatible = "ingenic,jz4780-dma";
+		reg = <0x13420000 0x10000>;
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <10>;
+
+		clocks = <&cgu JZ4780_CLK_PDMA>;
+	};
+
 	bch: bch@134d0000 {
 		compatible = "ingenic,jz4780-bch";
 		reg = <0x134d0000 0x10000>;
diff --git a/include/dt-bindings/dma/jz4780-dma.h b/include/dt-bindings/dma/jz4780-dma.h
new file mode 100644
index 000000000000..df017fdfb44e
--- /dev/null
+++ b/include/dt-bindings/dma/jz4780-dma.h
@@ -0,0 +1,49 @@
+#ifndef __DT_BINDINGS_DMA_JZ4780_DMA_H__
+#define __DT_BINDINGS_DMA_JZ4780_DMA_H__
+
+/*
+ * Request type numbers for the JZ4780 DMA controller (written to the DRTn
+ * register for the channel).
+ */
+#define JZ4780_DMA_I2S1_TX	0x4
+#define JZ4780_DMA_I2S1_RX	0x5
+#define JZ4780_DMA_I2S0_TX	0x6
+#define JZ4780_DMA_I2S0_RX	0x7
+#define JZ4780_DMA_AUTO		0x8
+#define JZ4780_DMA_SADC_RX	0x9
+#define JZ4780_DMA_UART4_TX	0xc
+#define JZ4780_DMA_UART4_RX	0xd
+#define JZ4780_DMA_UART3_TX	0xe
+#define JZ4780_DMA_UART3_RX	0xf
+#define JZ4780_DMA_UART2_TX	0x10
+#define JZ4780_DMA_UART2_RX	0x11
+#define JZ4780_DMA_UART1_TX	0x12
+#define JZ4780_DMA_UART1_RX	0x13
+#define JZ4780_DMA_UART0_TX	0x14
+#define JZ4780_DMA_UART0_RX	0x15
+#define JZ4780_DMA_SSI0_TX	0x16
+#define JZ4780_DMA_SSI0_RX	0x17
+#define JZ4780_DMA_SSI1_TX	0x18
+#define JZ4780_DMA_SSI1_RX	0x19
+#define JZ4780_DMA_MSC0_TX	0x1a
+#define JZ4780_DMA_MSC0_RX	0x1b
+#define JZ4780_DMA_MSC1_TX	0x1c
+#define JZ4780_DMA_MSC1_RX	0x1d
+#define JZ4780_DMA_MSC2_TX	0x1e
+#define JZ4780_DMA_MSC2_RX	0x1f
+#define JZ4780_DMA_PCM0_TX	0x20
+#define JZ4780_DMA_PCM0_RX	0x21
+#define JZ4780_DMA_SMB0_TX	0x24
+#define JZ4780_DMA_SMB0_RX	0x25
+#define JZ4780_DMA_SMB1_TX	0x26
+#define JZ4780_DMA_SMB1_RX	0x27
+#define JZ4780_DMA_SMB2_TX	0x28
+#define JZ4780_DMA_SMB2_RX	0x29
+#define JZ4780_DMA_SMB3_TX	0x2a
+#define JZ4780_DMA_SMB3_RX	0x2b
+#define JZ4780_DMA_SMB4_TX	0x2c
+#define JZ4780_DMA_SMB4_RX	0x2d
+#define JZ4780_DMA_DES_TX	0x2e
+#define JZ4780_DMA_DES_RX	0x2f
+
+#endif /* __DT_BINDINGS_DMA_JZ4780_DMA_H__ */
-- 
2.16.2

[PATCH v4 12/15] MIPS: dts: jz4780: Add MMC controller node to the devicetree

[Ezequiel Garcia]

From: Ezequiel Garcia <ezequiel@collabora.co.uk>

Add the devicetree node to support the MMC host controller
available in JZ480 SoCs.

Acked-by: James Hogan <jhogan@kernel.org>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 arch/mips/boot/dts/ingenic/jz4780.dtsi | 40 ++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 15a9801430bd..b72e53bb7292 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -253,6 +253,46 @@
 		clocks = <&cgu JZ4780_CLK_PDMA>;
 	};
 
+	mmc0: mmc@13450000 {
+		compatible = "ingenic,jz4780-mmc";
+		reg = <0x13450000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <37>;
+
+		clocks = <&cgu JZ4780_CLK_MSC0>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+		dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>,
+		       <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	mmc1: mmc@13460000 {
+		compatible = "ingenic,jz4780-mmc";
+		reg = <0x13460000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+
+		clocks = <&cgu JZ4780_CLK_MSC1>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+		dmas = <&dma JZ4780_DMA_MSC1_RX 0xffffffff>,
+		       <&dma JZ4780_DMA_MSC1_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
 	bch: bch@134d0000 {
 		compatible = "ingenic,jz4780-bch";
 		reg = <0x134d0000 0x10000>;
-- 
2.16.2

[PATCH v4 13/15] MIPS: dts: ci20: Enable MMC in the devicetree

[Ezequiel Garcia]

From: Ezequiel Garcia <ezequiel@collabora.co.uk>

Now that we have support for JZ480 SoCs in the MMC driver,
let's enable it on the devicetree.

Acked-by: James Hogan <jhogan@kernel.org>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index a4cc52214dbd..0ab5f59a56dc 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -36,6 +36,28 @@
 	clock-frequency = <48000000>;
 };
 
+&mmc0 {
+	status = "okay";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc0>;
+
+	cd-gpios = <&gpf 20 GPIO_ACTIVE_LOW>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc1>;
+};
+
 &uart0 {
 	status = "okay";
 
@@ -203,4 +225,16 @@
 		groups = "nemc-cs6";
 		bias-disable;
 	};
+
+	pins_mmc0: mmc0 {
+		function = "mmc0";
+		groups = "mmc0-1bit-e", "mmc0-4bit-e";
+		bias-disable;
+	};
+
+	pins_mmc1: mmc1 {
+		function = "mmc1";
+		groups = "mmc1-1bit-d", "mmc1-4bit-d";
+		bias-disable;
+	};
 };
-- 
2.16.2

[PATCH v4 14/15] MIPS: configs: ci20: Enable DMA and MMC support

[Ezequiel Garcia]

From: Ezequiel Garcia <ezequiel@collabora.co.uk>

Enable the SD/MMC support, along with DMA engine
support in the CI20 defconfig.

Acked-by: James Hogan <jhogan@kernel.org>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
---
 arch/mips/configs/ci20_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index b5f4ad8f2c45..f88b05fd3077 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -104,8 +104,11 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
+CONFIG_MMC_JZ4740=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_JZ4740=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_JZ4780=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MEMORY=y
 # CONFIG_DNOTIFY is not set
-- 
2.16.2

[PATCH v4 15/15] MIPS: configs: ci20: Enable ext4

[Ezequiel Garcia]

Now that we have MMC support, enable ext2/3/4 support
in the CI20 defconfig.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
---
 arch/mips/configs/ci20_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index f88b05fd3077..be23fd25eeaa 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -111,6 +111,7 @@ CONFIG_DMADEVICES=y
 CONFIG_DMA_JZ4780=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MEMORY=y
+CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_PROC_KCORE=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-- 
2.16.2

Re: [PATCH v4 15/15] MIPS: configs: ci20: Enable ext4

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 302 bytes --]

Hi,

On Wed, Mar 28, 2018 at 06:00:57PM -0300, Ezequiel Garcia wrote:
> Now that we have MMC support, enable ext2/3/4 support
> in the CI20 defconfig.
> 
> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>

Looks reasonable,

Acked-by: James Hogan <jhogan@kernel.org>

Thanks
James

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v4 15/15] MIPS: configs: ci20: Enable ext4

[Ulf Hansson]

On 28 March 2018 at 23:00, Ezequiel Garcia <ezequiel@collabora.com> wrote:
> Now that we have MMC support, enable ext2/3/4 support
> in the CI20 defconfig.
>
> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>

Thanks, queued for 4.18!

Kind regards
Uffe

> ---
>  arch/mips/configs/ci20_defconfig | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
> index f88b05fd3077..be23fd25eeaa 100644
> --- a/arch/mips/configs/ci20_defconfig
> +++ b/arch/mips/configs/ci20_defconfig
> @@ -111,6 +111,7 @@ CONFIG_DMADEVICES=y
>  CONFIG_DMA_JZ4780=y
>  # CONFIG_IOMMU_SUPPORT is not set
>  CONFIG_MEMORY=y
> +CONFIG_EXT4_FS=y
>  # CONFIG_DNOTIFY is not set
>  CONFIG_PROC_KCORE=y
>  # CONFIG_PROC_PAGE_MONITOR is not set
> --
> 2.16.2
>

Re: [PATCH v4 00/14] Enable SD/MMC on JZ4780 SoCs

[Ulf Hansson]

On 28 March 2018 at 23:00, Ezequiel Garcia <ezequiel@collabora.com> wrote:
> This patchset adds support for SD/MMC on JZ4780 based
> platforms, such as the MIPS Creator CI20 board.
>
> Most of the work has been done by Alex, Paul and Zubair,
> while I've only prepared the upstream submission, cleaned
> some patches, and written some commit logs where needed.
>
> All praises should go to them, all rants to me.
>
> The series is based on v4.16-rc6.

I have queued up this series for 4.18, with the following exceptions.
*) Patch 1, which I applied as fix for 3.17.
**) Patch 15, deferred until James acks it.

Thanks and kind regards
Uffe

>
> Changes from v3:
>   * Replaced callbacks with if/else magic to handle
>     the different register widths on versions of the SoC.
>
> Changes from v2:
>   * Fix commit log in "mmc: dt-bindings: add MMC support to JZ4740 SoC"
>
> Changes from v1:
>   * Reordered patches, fixes first, for easier backporting.
>   * Added Link and Fixes tags to patch "Fix race condition",
>     for easier backporting.
>   * Enabled the DMA in the dtsi for jz4780, dropped it from the ci20 dts.
>   * Reworded config and help user visible text.
>   * Reworded commit logs, using imperative.
>   * Re-authored my patches, as Collabora is partially
>     sponsoring them.
>
>
> Alex Smith (3):
>   mmc: jz4740: Fix race condition in IRQ mask update
>   mmc: jz4740: Set clock rate to mmc->f_max rather than JZ_MMC_CLK_RATE
>   mmc: jz4740: Add support for the JZ4780
>
> Ezequiel Garcia (10):
>   mmc: jz4780: Order headers alphabetically
>   mmc: jz4740: Use dev_get_platdata
>   mmc: jz4740: Introduce devicetree probe
>   mmc: dt-bindings: add MMC support to JZ4740 SoC
>   mmc: jz4740: Use dma_request_chan()
>   MIPS: dts: jz4780: Add DMA controller node to the devicetree
>   MIPS: dts: jz4780: Add MMC controller node to the devicetree
>   MIPS: dts: ci20: Enable MMC in the devicetree
>   MIPS: configs: ci20: Enable DMA and MMC support
>   MIPS: configs: ci20: Enable ext4
>
> Paul Cercueil (1):
>   mmc: jz4740: Fix error exit path in driver's probe
>
> Zubair Lutfullah Kakakhel (1):
>   mmc: jz4740: Reset the device requesting the interrupt
>
>  Documentation/devicetree/bindings/mmc/jz4740.txt |  38 +++++
>  arch/mips/boot/dts/ingenic/ci20.dts              |  34 ++++
>  arch/mips/boot/dts/ingenic/jz4780.dtsi           |  52 ++++++
>  arch/mips/configs/ci20_defconfig                 |   4 +
>  drivers/mmc/host/Kconfig                         |   9 +-
>  drivers/mmc/host/jz4740_mmc.c                    | 205 +++++++++++++++--------
>  include/dt-bindings/dma/jz4780-dma.h             |  49 ++++++
>  7 files changed, 321 insertions(+), 70 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/jz4740.txt
>  create mode 100644 include/dt-bindings/dma/jz4780-dma.h
>
> --
> 2.16.2
>