[PATCH v3 0/3] ARM64: dts: meson-axg: add AO clock driver

[PATCH v3 0/3] ARM64: dts: meson-axg: add AO clock driver

[Yixun Lan]

  These patches try to add AO clock driver for the Amlogic's
AXG SoC, while adding this driver, we found the pclk for uart AO
controller was wrong, so fix it here.
  Note, this patch actually depend on AO clock driver[2]
Please take these patches untill AO clock driver is merged.

changes since v2 at [1]: 
 - previous the DTS patches sit in two seperate series, merge them
   into one patch set.
 
changes since v1 at [0]: 
 -

[0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
[1] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
  https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
[2] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com


Qiufang Dai (1):
  arm64: dts: meson-axg: add AO clock driver DT info

Yixun Lan (2):
  ARM64: dts: meson-axg: add an 32K alt aoclk
  ARM64: dts: meson: fix clock source of the pclk for UART_AO

 arch/arm64/boot/dts/amlogic/meson-axg.dtsi  | 23 +++++++++++++++++++++--
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi |  4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  |  4 ++--
 3 files changed, 25 insertions(+), 6 deletions(-)

-- 
2.15.1

[PATCH v3 0/3] ARM64: dts: meson-axg: add AO clock driver

[Yixun Lan]

  These patches try to add AO clock driver for the Amlogic's
AXG SoC, while adding this driver, we found the pclk for uart AO
controller was wrong, so fix it here.
  Note, this patch actually depend on AO clock driver[2]
Please take these patches untill AO clock driver is merged.

changes since v2 at [1]: 
 - previous the DTS patches sit in two seperate series, merge them
   into one patch set.
 
changes since v1 at [0]: 
 -

[0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
[1] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
  https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
[2] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com


Qiufang Dai (1):
  arm64: dts: meson-axg: add AO clock driver DT info

Yixun Lan (2):
  ARM64: dts: meson-axg: add an 32K alt aoclk
  ARM64: dts: meson: fix clock source of the pclk for UART_AO

 arch/arm64/boot/dts/amlogic/meson-axg.dtsi  | 23 +++++++++++++++++++++--
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi |  4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  |  4 ++--
 3 files changed, 25 insertions(+), 6 deletions(-)

-- 
2.15.1

[PATCH v3 0/3] ARM64: dts: meson-axg: add AO clock driver

[Yixun Lan]

  These patches try to add AO clock driver for the Amlogic's
AXG SoC, while adding this driver, we found the pclk for uart AO
controller was wrong, so fix it here.
  Note, this patch actually depend on AO clock driver[2]
Please take these patches untill AO clock driver is merged.

changes since v2 at [1]: 
 - previous the DTS patches sit in two seperate series, merge them
   into one patch set.
 
changes since v1 at [0]: 
 -

[0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
[1] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
  https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
[2] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com


Qiufang Dai (1):
  arm64: dts: meson-axg: add AO clock driver DT info

Yixun Lan (2):
  ARM64: dts: meson-axg: add an 32K alt aoclk
  ARM64: dts: meson: fix clock source of the pclk for UART_AO

 arch/arm64/boot/dts/amlogic/meson-axg.dtsi  | 23 +++++++++++++++++++++--
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi |  4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  |  4 ++--
 3 files changed, 25 insertions(+), 6 deletions(-)

-- 
2.15.1

[PATCH v3 0/3] ARM64: dts: meson-axg: add AO clock driver

[Yixun Lan]

  These patches try to add AO clock driver for the Amlogic's
AXG SoC, while adding this driver, we found the pclk for uart AO
controller was wrong, so fix it here.
  Note, this patch actually depend on AO clock driver[2]
Please take these patches untill AO clock driver is merged.

changes since v2 at [1]: 
 - previous the DTS patches sit in two seperate series, merge them
   into one patch set.
 
changes since v1 at [0]: 
 -

[0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
[1] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
  https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
[2] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com


Qiufang Dai (1):
  arm64: dts: meson-axg: add AO clock driver DT info

Yixun Lan (2):
  ARM64: dts: meson-axg: add an 32K alt aoclk
  ARM64: dts: meson: fix clock source of the pclk for UART_AO

 arch/arm64/boot/dts/amlogic/meson-axg.dtsi  | 23 +++++++++++++++++++++--
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi |  4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  |  4 ++--
 3 files changed, 25 insertions(+), 6 deletions(-)

-- 
2.15.1

[PATCH v3 1/3] arm64: dts: meson-axg: add AO clock driver DT info

[Yixun Lan]

From: Qiufang Dai <qiufang.dai@amlogic.com>

This add the AO (Always-On part) clock DT info for Meson-AXG SoC

Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b58808eb3cc8..b0eff7d7f771 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/axg-clkc.h>
+#include <dt-bindings/clock/axg-aoclkc.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -688,6 +689,17 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
 
+			sysctrl_AO: sys-ctrl@0 {
+				compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd";
+				reg =  <0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-axg-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+				};
+			};
+
 			pinctrl_aobus: pinctrl@14 {
 				compatible = "amlogic,meson-axg-aobus-pinctrl";
 				#address-cells = <2>;
-- 
2.15.1

[PATCH v3 1/3] arm64: dts: meson-axg: add AO clock driver DT info

[Yixun Lan]

From: Qiufang Dai <qiufang.dai@amlogic.com>

This add the AO (Always-On part) clock DT info for Meson-AXG SoC

Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b58808eb3cc8..b0eff7d7f771 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/axg-clkc.h>
+#include <dt-bindings/clock/axg-aoclkc.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -688,6 +689,17 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
 
+			sysctrl_AO: sys-ctrl@0 {
+				compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd";
+				reg =  <0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-axg-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+				};
+			};
+
 			pinctrl_aobus: pinctrl@14 {
 				compatible = "amlogic,meson-axg-aobus-pinctrl";
 				#address-cells = <2>;
-- 
2.15.1

[PATCH v3 1/3] arm64: dts: meson-axg: add AO clock driver DT info

[Yixun Lan]

From: Qiufang Dai <qiufang.dai@amlogic.com>

This add the AO (Always-On part) clock DT info for Meson-AXG SoC

Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b58808eb3cc8..b0eff7d7f771 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/axg-clkc.h>
+#include <dt-bindings/clock/axg-aoclkc.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -688,6 +689,17 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
 
+			sysctrl_AO: sys-ctrl at 0 {
+				compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd";
+				reg =  <0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-axg-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+				};
+			};
+
 			pinctrl_aobus: pinctrl at 14 {
 				compatible = "amlogic,meson-axg-aobus-pinctrl";
 				#address-cells = <2>;
-- 
2.15.1

[PATCH v3 1/3] arm64: dts: meson-axg: add AO clock driver DT info

[Yixun Lan]

From: Qiufang Dai <qiufang.dai@amlogic.com>

This add the AO (Always-On part) clock DT info for Meson-AXG SoC

Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b58808eb3cc8..b0eff7d7f771 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/axg-clkc.h>
+#include <dt-bindings/clock/axg-aoclkc.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -688,6 +689,17 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
 
+			sysctrl_AO: sys-ctrl at 0 {
+				compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd";
+				reg =  <0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-axg-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+				};
+			};
+
 			pinctrl_aobus: pinctrl at 14 {
 				compatible = "amlogic,meson-axg-aobus-pinctrl";
 				#address-cells = <2>;
-- 
2.15.1

[PATCH v3 2/3] ARM64: dts: meson-axg: add an 32K alt aoclk

[Yixun Lan]

The ao_clk81 in AO domain have two clock source,
one from a 32K alt crystal we name it as ao_alt_clk,
another is the clk81 signal from EE domain.

Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b0eff7d7f771..40ca49fb94a6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -108,6 +108,13 @@
 		#clock-cells = <0>;
 	};
 
+	ao_alt_xtal: ao_alt_xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32000000>;
+		clock-output-names = "ao_alt_xtal";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-- 
2.15.1

[PATCH v3 2/3] ARM64: dts: meson-axg: add an 32K alt aoclk

[Yixun Lan]

The ao_clk81 in AO domain have two clock source,
one from a 32K alt crystal we name it as ao_alt_clk,
another is the clk81 signal from EE domain.

Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b0eff7d7f771..40ca49fb94a6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -108,6 +108,13 @@
 		#clock-cells = <0>;
 	};
 
+	ao_alt_xtal: ao_alt_xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32000000>;
+		clock-output-names = "ao_alt_xtal";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-- 
2.15.1

[PATCH v3 2/3] ARM64: dts: meson-axg: add an 32K alt aoclk

[Yixun Lan]

The ao_clk81 in AO domain have two clock source,
one from a 32K alt crystal we name it as ao_alt_clk,
another is the clk81 signal from EE domain.

Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b0eff7d7f771..40ca49fb94a6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -108,6 +108,13 @@
 		#clock-cells = <0>;
 	};
 
+	ao_alt_xtal: ao_alt_xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32000000>;
+		clock-output-names = "ao_alt_xtal";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-- 
2.15.1

[PATCH v3 2/3] ARM64: dts: meson-axg: add an 32K alt aoclk

[Yixun Lan]

The ao_clk81 in AO domain have two clock source,
one from a 32K alt crystal we name it as ao_alt_clk,
another is the clk81 signal from EE domain.

Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b0eff7d7f771..40ca49fb94a6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -108,6 +108,13 @@
 		#clock-cells = <0>;
 	};
 
+	ao_alt_xtal: ao_alt_xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32000000>;
+		clock-output-names = "ao_alt_xtal";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-- 
2.15.1

[PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO

[Yixun Lan]

>From the hardware perspective, the actual pclk of the AO uarts
is the corresponding clkc_ao uart gate, not the main clock controller clk81.
This was not problem so far, because the uart_gate had
the CLK_IGNORE_UNUSED flag, which kept the gate open.

We plan to remove the CLK_IGNORE_UNUSED flag in another patch,
but before doing that, we need to fix the clock in the DTS file.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi  | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 40ca49fb94a6..dc6ca0895f11 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -798,7 +798,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
@@ -807,7 +807,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x4000 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 562c26a0ba33..ea6898f62044 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -749,12 +749,12 @@
 };
 
 &uart_AO {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_AO_B {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index e1a39cbed8c9..472106ce9a75 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -697,12 +697,12 @@
 };
 
 &uart_AO {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_AO_B {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
-- 
2.15.1

[PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO

[Yixun Lan]

>From the hardware perspective, the actual pclk of the AO uarts
is the corresponding clkc_ao uart gate, not the main clock controller clk81.
This was not problem so far, because the uart_gate had
the CLK_IGNORE_UNUSED flag, which kept the gate open.

We plan to remove the CLK_IGNORE_UNUSED flag in another patch,
but before doing that, we need to fix the clock in the DTS file.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi  | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 40ca49fb94a6..dc6ca0895f11 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -798,7 +798,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
@@ -807,7 +807,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x4000 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 562c26a0ba33..ea6898f62044 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -749,12 +749,12 @@
 };
 
 &uart_AO {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_AO_B {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index e1a39cbed8c9..472106ce9a75 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -697,12 +697,12 @@
 };
 
 &uart_AO {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_AO_B {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
-- 
2.15.1

[PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO

[Yixun Lan]

>From the hardware perspective, the actual pclk of the AO uarts
is the corresponding clkc_ao uart gate, not the main clock controller clk81.
This was not problem so far, because the uart_gate had
the CLK_IGNORE_UNUSED flag, which kept the gate open.

We plan to remove the CLK_IGNORE_UNUSED flag in another patch,
but before doing that, we need to fix the clock in the DTS file.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi  | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 40ca49fb94a6..dc6ca0895f11 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -798,7 +798,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
@@ -807,7 +807,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x4000 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 562c26a0ba33..ea6898f62044 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -749,12 +749,12 @@
 };
 
 &uart_AO {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_AO_B {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index e1a39cbed8c9..472106ce9a75 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -697,12 +697,12 @@
 };
 
 &uart_AO {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_AO_B {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
-- 
2.15.1

[PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO

[Yixun Lan]

>From the hardware perspective, the actual pclk of the AO uarts
is the corresponding clkc_ao uart gate, not the main clock controller clk81.
This was not problem so far, because the uart_gate had
the CLK_IGNORE_UNUSED flag, which kept the gate open.

We plan to remove the CLK_IGNORE_UNUSED flag in another patch,
but before doing that, we need to fix the clock in the DTS file.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi  | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 40ca49fb94a6..dc6ca0895f11 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -798,7 +798,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
@@ -807,7 +807,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x4000 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 562c26a0ba33..ea6898f62044 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -749,12 +749,12 @@
 };
 
 &uart_AO {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_AO_B {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index e1a39cbed8c9..472106ce9a75 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -697,12 +697,12 @@
 };
 
 &uart_AO {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_AO_B {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
-- 
2.15.1

Re: [PATCH v3 1/3] arm64: dts: meson-axg: add AO clock driver DT info

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1409 bytes --]

Hi Qiufang,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.16-rc7]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yixun-Lan/ARM64-dts-meson-axg-add-AO-clock-driver/20180329-134803
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-defconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm64 

All errors (new ones prefixed by >>):

   In file included from arch/arm64/boot/dts/amlogic/meson-axg-s400.dts:9:0:
>> arch/arm64/boot/dts/amlogic/meson-axg.dtsi:11:10: fatal error: dt-bindings/clock/axg-aoclkc.h: No such file or directory
    #include <dt-bindings/clock/axg-aoclkc.h>
             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   compilation terminated.

vim +11 arch/arm64/boot/dts/amlogic/meson-axg.dtsi

  > 11	#include <dt-bindings/clock/axg-aoclkc.h>
    12	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 37934 bytes --]

Re: [PATCH v3 1/3] arm64: dts: meson-axg: add AO clock driver DT info

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1409 bytes --]

Hi Qiufang,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.16-rc7]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yixun-Lan/ARM64-dts-meson-axg-add-AO-clock-driver/20180329-134803
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-defconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm64 

All errors (new ones prefixed by >>):

   In file included from arch/arm64/boot/dts/amlogic/meson-axg-s400.dts:9:0:
>> arch/arm64/boot/dts/amlogic/meson-axg.dtsi:11:10: fatal error: dt-bindings/clock/axg-aoclkc.h: No such file or directory
    #include <dt-bindings/clock/axg-aoclkc.h>
             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   compilation terminated.

vim +11 arch/arm64/boot/dts/amlogic/meson-axg.dtsi

  > 11	#include <dt-bindings/clock/axg-aoclkc.h>
    12	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 37934 bytes --]

[PATCH v3 1/3] arm64: dts: meson-axg: add AO clock driver DT info

[kbuild test robot]

Hi Qiufang,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.16-rc7]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yixun-Lan/ARM64-dts-meson-axg-add-AO-clock-driver/20180329-134803
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-defconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm64 

All errors (new ones prefixed by >>):

   In file included from arch/arm64/boot/dts/amlogic/meson-axg-s400.dts:9:0:
>> arch/arm64/boot/dts/amlogic/meson-axg.dtsi:11:10: fatal error: dt-bindings/clock/axg-aoclkc.h: No such file or directory
    #include <dt-bindings/clock/axg-aoclkc.h>
             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   compilation terminated.

vim +11 arch/arm64/boot/dts/amlogic/meson-axg.dtsi

  > 11	#include <dt-bindings/clock/axg-aoclkc.h>
    12	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 37934 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180329/321d2e53/attachment-0001.gz>

[PATCH v3 1/3] arm64: dts: meson-axg: add AO clock driver DT info

[kbuild test robot]

Hi Qiufang,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.16-rc7]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yixun-Lan/ARM64-dts-meson-axg-add-AO-clock-driver/20180329-134803
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-defconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm64 

All errors (new ones prefixed by >>):

   In file included from arch/arm64/boot/dts/amlogic/meson-axg-s400.dts:9:0:
>> arch/arm64/boot/dts/amlogic/meson-axg.dtsi:11:10: fatal error: dt-bindings/clock/axg-aoclkc.h: No such file or directory
    #include <dt-bindings/clock/axg-aoclkc.h>
             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   compilation terminated.

vim +11 arch/arm64/boot/dts/amlogic/meson-axg.dtsi

  > 11	#include <dt-bindings/clock/axg-aoclkc.h>
    12	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 37934 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-amlogic/attachments/20180329/321d2e53/attachment.gz>

Re: [PATCH v3 2/3] ARM64: dts: meson-axg: add an 32K alt aoclk

[Kevin Hilman]

Yixun Lan <yixun.lan@amlogic.com> writes:

> The ao_clk81 in AO domain have two clock source,
> one from a 32K alt crystal we name it as ao_alt_clk,
> another is the clk81 signal from EE domain.
>
> Acked-by: Jerome Brunet <jbrunet@baylibre.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>

As this one is a stanadlone, I've applied it to v4.18/dt64,

Thanks,

Kevin

> ---
>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index b0eff7d7f771..40ca49fb94a6 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -108,6 +108,13 @@
>  		#clock-cells = <0>;
>  	};
>  
> +	ao_alt_xtal: ao_alt_xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <32000000>;
> +		clock-output-names = "ao_alt_xtal";
> +		#clock-cells = <0>;
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		#address-cells = <2>;

Re: [PATCH v3 2/3] ARM64: dts: meson-axg: add an 32K alt aoclk

[Kevin Hilman]

Yixun Lan <yixun.lan@amlogic.com> writes:

> The ao_clk81 in AO domain have two clock source,
> one from a 32K alt crystal we name it as ao_alt_clk,
> another is the clk81 signal from EE domain.
>
> Acked-by: Jerome Brunet <jbrunet@baylibre.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>

As this one is a stanadlone, I've applied it to v4.18/dt64,

Thanks,

Kevin

> ---
>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index b0eff7d7f771..40ca49fb94a6 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -108,6 +108,13 @@
>  		#clock-cells = <0>;
>  	};
>  
> +	ao_alt_xtal: ao_alt_xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <32000000>;
> +		clock-output-names = "ao_alt_xtal";
> +		#clock-cells = <0>;
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		#address-cells = <2>;

[PATCH v3 2/3] ARM64: dts: meson-axg: add an 32K alt aoclk

[Kevin Hilman]

Yixun Lan <yixun.lan@amlogic.com> writes:

> The ao_clk81 in AO domain have two clock source,
> one from a 32K alt crystal we name it as ao_alt_clk,
> another is the clk81 signal from EE domain.
>
> Acked-by: Jerome Brunet <jbrunet@baylibre.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>

As this one is a stanadlone, I've applied it to v4.18/dt64,

Thanks,

Kevin

> ---
>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index b0eff7d7f771..40ca49fb94a6 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -108,6 +108,13 @@
>  		#clock-cells = <0>;
>  	};
>  
> +	ao_alt_xtal: ao_alt_xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <32000000>;
> +		clock-output-names = "ao_alt_xtal";
> +		#clock-cells = <0>;
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		#address-cells = <2>;

[PATCH v3 2/3] ARM64: dts: meson-axg: add an 32K alt aoclk

[Kevin Hilman]

Yixun Lan <yixun.lan@amlogic.com> writes:

> The ao_clk81 in AO domain have two clock source,
> one from a 32K alt crystal we name it as ao_alt_clk,
> another is the clk81 signal from EE domain.
>
> Acked-by: Jerome Brunet <jbrunet@baylibre.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>

As this one is a stanadlone, I've applied it to v4.18/dt64,

Thanks,

Kevin

> ---
>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index b0eff7d7f771..40ca49fb94a6 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -108,6 +108,13 @@
>  		#clock-cells = <0>;
>  	};
>  
> +	ao_alt_xtal: ao_alt_xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <32000000>;
> +		clock-output-names = "ao_alt_xtal";
> +		#clock-cells = <0>;
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		#address-cells = <2>;