[PATCH 3.18 00/93] 3.18.103-stable review

[PATCH 3.18 00/93] 3.18.103-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.18.103 release.
There are 93 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Apr  8 08:42:04 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.103-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.18.103-rc1

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "ARM: dts: omap3-n900: Fix the audio CODEC's reset pin"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()"

Guoqing Jiang <gqjiang@suse.com>
    md/raid10: reset the 'first' at the end of loop

Keerthy <j-keerthy@ti.com>
    ARM: dts: dra7: Add power hold and power controller properties to palmas

Keerthy <j-keerthy@ti.com>
    Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition

Mike Frysinger <vapier@chromium.org>
    vt: change SGR 21 to follow the standards

Ondrej Zary <linux@rainbow-software.org>
    Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad

Dennis Wassenberg <dennis.wassenberg@secunet.com>
    Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list

Andy Lutomirski <luto@kernel.org>
    fs/proc: Stop trying to report thread stacks

Johannes Weiner <hannes@cmpxchg.org>
    proc: revert /proc/<pid>/maps [stack:TID] annotation

Eric Biggers <ebiggers@google.com>
    crypto: x86/cast5-avx - fix ECB encryption when long sg follows short one

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: ahash - Fix early termination in hash walk

Alexander Gerasiov <gq@redlab-i.ru>
    parport_pc: Add support for WCH CH382L PCI-E single parallel port card.

Oliver Neukum <oneukum@suse.com>
    media: usbtv: prevent double free in error case

Colin Ian King <colin.king@canonical.com>
    mei: remove dev_err message on an unsupported ioctl

Johan Hovold <johan@kernel.org>
    USB: serial: cp210x: add ELDAT Easywave RX09 id

Clemens Werther <clemens.werther@gmail.com>
    USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator

Major Hayden <major@mhtx.net>
    USB: serial: ftdi_sio: add RT Systems VX-8 cable

Mauro Carvalho Chehab <mchehab@s-opensource.com>
    media: v4l2-compat-ioctl32: initialize a reserved field

Mauro Carvalho Chehab <mchehab@s-opensource.com>
    media: v4l2-compat-ioctl32: use compat_u64 for video standard

Ricardo Ribalda <ricardo.ribalda@gmail.com>
    media: media/v4l2-ctrls: volatiles should not generate CH_VALUE

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-ctrls: fix sparse warning

Daniel Mentz <danielmentz@google.com>
    media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32

Daniel Mentz <danielmentz@google.com>
    media: v4l2-compat-ioctl32: Copy v4l2_window->global_alpha

Hans Verkuil <hansverk@cisco.com>
    media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: avoid sizeof(type)

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: fix the indentation

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF

Ricardo Ribalda <ricardo.ribalda@gmail.com>
    vb2: V4L2_BUF_FLAG_DONE is set after DQBUF

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-ioctl.c: don't copy back the result for -ENOTTY

Paolo Bonzini <pbonzini@redhat.com>
    scsi: virtio_scsi: always read VPD pages for multiqueue too

Szymon Janc <szymon.janc@codecoup.pl>
    Bluetooth: Fix missing encryption refresh on Security Request

Florian Westphal <fw@strlen.de>
    netfilter: x_tables: add and use xt_check_proc_name

Florian Westphal <fw@strlen.de>
    netfilter: bridge: ebt_among: add more missing match size checks

Steffen Klassert <steffen.klassert@secunet.com>
    xfrm: Refuse to insert 32 bit userspace socket policies on 64 bit systems

Greg Hackmann <ghackmann@google.com>
    net: xfrm: use preempt-safe this_cpu_read() in ipcomp_alloc_tfms()

Florian Westphal <fw@strlen.de>
    xfrm_user: uncoditionally validate esn replay attribute struct

Masami Hiramatsu <mhiramat@kernel.org>
    kprobes/x86: Fix to set RWX bits correctly before releasing trampoline

Ben Hutchings <ben.hutchings@codethink.co.uk>
    xhci: Fix ring leak in failure path of xhci_alloc_virt_device()

Ben Hutchings <ben.hutchings@codethink.co.uk>
    Revert "led: core: Fix brightness setting when setting delay_off=0"

Krzysztof Opasiak <kopasiak90@gmail.com>
    usb: gadget: f_hid: fix: Prevent accessing released memory

Felipe F. Tonello <eu@felipetonello.com>
    usb: gadget: align buffer size when allocating for OUT endpoint

Felipe F. Tonello <eu@felipetonello.com>
    usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align

Felipe F. Tonello <eu@felipetonello.com>
    usb: gadget: change len to size_t on alloc_ep_req()

Felipe F. Tonello <eu@felipetonello.com>
    usb: gadget: define free_ep_req as universal function

Richard Narron <comet.berkeley@gmail.com>
    partitions/msdos: Unable to mount UFS 44bsd partitions

Linus Torvalds <torvalds@linux-foundation.org>
    perf/hwbp: Simplify the perf-hwbp code, fix documentation

Dan Carpenter <dan.carpenter@oracle.com>
    ALSA: pcm: potential uninitialized return values

Stefan Roese <sr@denx.de>
    ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()

Linus Walleij <linus.walleij@linaro.org>
    mtd: jedec_probe: Fix crash in jedec_read_mfr()

Florian Fainelli <f.fainelli@gmail.com>
    net: fec: Fix unbalanced PM runtime calls

Julian Wiedmann <jwi@linux.vnet.ibm.com>
    s390/qeth: on channel error, reject further cmd requests

Julian Wiedmann <jwi@linux.vnet.ibm.com>
    s390/qeth: lock read device while queueing next buffer

Julian Wiedmann <jwi@linux.vnet.ibm.com>
    s390/qeth: when thread completes, wake up all waiters

Julian Wiedmann <jwi@linux.vnet.ibm.com>
    s390/qeth: free netdevice when removing a card

Arkadi Sharshevsky <arkadis@mellanox.com>
    team: Fix double free in error path

Vinicius Costa Gomes <vinicius.gomes@intel.com>
    skbuff: Fix not waking applications when errors are enqueued

David Ahern <dsahern@gmail.com>
    net: Only honor ifindex in IP_PKTINFO if non-0

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    netlink: avoid a double skb free in genlmsg_mcast()

Arvind Yadav <arvind.yadav.cs@gmail.com>
    net/iucv: Free memory obtained by kzalloc

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred

Eric Dumazet <edumazet@google.com>
    l2tp: do not accept arbitrary sockets

Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
    ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()

Alexey Kodanev <alexey.kodanev@oracle.com>
    dccp: check sk for closed state in dccp_sendmsg()

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs"

Johannes Thumshirn <jthumshirn@suse.de>
    scsi: sg: don't return bogus Sg_requests

Linus Torvalds <torvalds@linux-foundation.org>
    kvm/x86: fix icebp instruction handling

Linus Torvalds <torvalds@linux-foundation.org>
    tty: vt: fix up tabstops properly

Andri Yngvason <andri.yngvason@marel.com>
    can: cc770: Fix use after free in cc770_tx_interrupt()

Andri Yngvason <andri.yngvason@marel.com>
    can: cc770: Fix queue stall & dropped RTR reply

Andri Yngvason <andri.yngvason@marel.com>
    can: cc770: Fix stalls on rt-linux, remove redundant IRQ ack

Dan Carpenter <dan.carpenter@oracle.com>
    staging: ncpfs: memory corruption in ncp_read_kernel()

Masami Hiramatsu <mhiramat@kernel.org>
    tracing: probeevent: Fix to support minus offset from symbol

Arend Van Spriel <arend.vanspriel@broadcom.com>
    brcmfmac: fix P2P_DEVICE ethernet address generation

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    drm: udl: Properly check framebuffer mmap offsets

Hans de Goede <hdegoede@redhat.com>
    libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version

Hans de Goede <hdegoede@redhat.com>
    libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions

Hans de Goede <hdegoede@redhat.com>
    libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs

Ju Hyung Park <qkrwngud825@gmail.com>
    libata: Enable queued TRIM for Samsung SSD 860

Kai-Heng Feng <kai.heng.feng@canonical.com>
    libata: disable LPM for Crucial BX100 SSD 500GB drive

Hans de Goede <hdegoede@redhat.com>
    libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs

Eric Biggers <ebiggers@google.com>
    libata: remove WARN() for DMA or PIO command without data

Eric Biggers <ebiggers@google.com>
    libata: fix length validation of ATAPI-relayed SCSI commands

Takashi Iwai <tiwai@suse.de>
    ALSA: aloop: Fix access to not-yet-ready substream via cable

Takashi Iwai <tiwai@suse.de>
    ALSA: aloop: Sync stale timer before release

Kirill Marinushkin <k.marinushkin@gmail.com>
    ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit


-------------

Diffstat:

 .../devicetree/bindings/pinctrl/pinctrl-palmas.txt |    9 +
 Documentation/filesystems/proc.txt                 |   31 +-
 Makefile                                           |    4 +-
 arch/arm/boot/dts/am335x-pepper.dts                |    2 +-
 arch/arm/boot/dts/dra7-evm.dts                     |    2 +
 arch/arm/boot/dts/omap3-n900.dts                   |    4 +-
 arch/x86/crypto/cast5_avx_glue.c                   |    3 +-
 arch/x86/include/asm/vmx.h                         |    1 +
 arch/x86/kernel/kprobes/core.c                     |    9 +
 arch/x86/kvm/vmx.c                                 |    9 +-
 block/partitions/msdos.c                           |    4 +-
 crypto/ahash.c                                     |    7 +-
 drivers/ata/libata-core.c                          |   26 +-
 drivers/ata/libata-scsi.c                          |    4 +-
 drivers/gpu/drm/udl/udl_fb.c                       |    9 +-
 drivers/input/serio/i8042-x86ia64io.h              |   24 +
 drivers/leds/led-core.c                            |    2 +-
 drivers/md/raid10.c                                |    1 +
 drivers/media/usb/usbtv/usbtv-core.c               |    2 +
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c      | 1020 ++++++++++++--------
 drivers/media/v4l2-core/v4l2-ctrls.c               |   96 +-
 drivers/media/v4l2-core/v4l2-ioctl.c               |    5 +-
 drivers/media/v4l2-core/videobuf2-core.c           |    5 +
 drivers/misc/mei/main.c                            |    1 -
 drivers/mtd/chips/jedec_probe.c                    |    2 +
 drivers/net/can/cc770/cc770.c                      |  100 +-
 drivers/net/can/cc770/cc770.h                      |    2 +
 drivers/net/ethernet/arc/emac_rockchip.c           |    6 +-
 drivers/net/ethernet/freescale/fec_main.c          |    2 +
 drivers/net/team/team.c                            |    4 +-
 drivers/net/wireless/brcm80211/brcmfmac/p2p.c      |   24 +-
 drivers/parport/parport_pc.c                       |    4 +
 drivers/pci/pci-driver.c                           |    2 +
 drivers/s390/net/qeth_core_main.c                  |   21 +-
 drivers/s390/net/qeth_l2_main.c                    |    2 +-
 drivers/s390/net/qeth_l3_main.c                    |    2 +-
 drivers/scsi/sg.c                                  |    5 +-
 drivers/scsi/virtio_scsi.c                         |    1 +
 drivers/tty/vt/vt.c                                |   14 +-
 drivers/usb/gadget/function/f_hid.c                |   24 +-
 drivers/usb/gadget/function/f_midi.c               |    6 -
 drivers/usb/gadget/function/f_sourcesink.c         |    6 -
 drivers/usb/gadget/function/g_zero.h               |    1 -
 drivers/usb/gadget/u_f.c                           |    6 +-
 drivers/usb/gadget/u_f.h                           |   26 +-
 drivers/usb/host/xhci-mem.c                        |    3 +-
 drivers/usb/serial/cp210x.c                        |    1 +
 drivers/usb/serial/ftdi_sio.c                      |    2 +
 drivers/usb/serial/ftdi_sio_ids.h                  |    9 +
 fs/ncpfs/ncplib_kernel.c                           |    4 +
 fs/proc/task_mmu.c                                 |   63 +-
 fs/proc/task_nommu.c                               |   43 +-
 include/linux/mm.h                                 |    3 +-
 include/linux/netfilter/x_tables.h                 |    2 +
 include/linux/usb/gadget.h                         |   17 +-
 include/uapi/linux/usb/audio.h                     |    4 +-
 kernel/events/hw_breakpoint.c                      |   30 +-
 kernel/irq/manage.c                                |    4 +-
 kernel/kprobes.c                                   |    2 +-
 kernel/trace/trace_kprobe.c                        |    4 +-
 kernel/trace/trace_probe.c                         |    8 +-
 kernel/trace/trace_probe.h                         |    2 +-
 mm/util.c                                          |   27 +-
 net/bluetooth/smp.c                                |    8 +-
 net/bridge/netfilter/ebt_among.c                   |   34 +
 net/core/skbuff.c                                  |    2 +-
 net/dccp/proto.c                                   |    5 +
 net/ipv4/ip_sockglue.c                             |    6 +-
 net/ipv6/ndisc.c                                   |    3 +-
 net/iucv/af_iucv.c                                 |    4 +-
 net/l2tp/l2tp_core.c                               |    8 +-
 net/netfilter/x_tables.c                           |   30 +
 net/netfilter/xt_hashlimit.c                       |    5 +-
 net/netfilter/xt_recent.c                          |    6 +-
 net/netlink/genetlink.c                            |    2 +-
 net/xfrm/xfrm_ipcomp.c                             |    2 +-
 net/xfrm/xfrm_state.c                              |    5 +
 net/xfrm/xfrm_user.c                               |   21 +-
 sound/core/oss/pcm_oss.c                           |    4 +-
 sound/core/pcm_native.c                            |    2 +-
 sound/drivers/aloop.c                              |   17 +-
 81 files changed, 1176 insertions(+), 756 deletions(-)

[PATCH 3.18 01/93] ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill Marinushkin <k.marinushkin@gmail.com>

commit a6618f4aedb2b60932d766bd82ae7ce866e842aa upstream.

Currently, the offsets in the UAC2 processing unit descriptor are
calculated incorrectly. It causes an issue when connecting the device which
provides such a feature:

~~~~
[84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18)
~~~~

After this patch is applied, the UAC2 processing unit inits w/o this error.

Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/uapi/linux/usb/audio.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/include/uapi/linux/usb/audio.h
+++ b/include/uapi/linux/usb/audio.h
@@ -369,7 +369,7 @@ static inline __u8 uac_processing_unit_b
 {
 	return (protocol == UAC_VERSION_1) ?
 		desc->baSourceID[desc->bNrInPins + 4] :
-		desc->baSourceID[desc->bNrInPins + 6];
+		2; /* in UAC2, this value is constant */
 }
 
 static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc,
@@ -377,7 +377,7 @@ static inline __u8 *uac_processing_unit_
 {
 	return (protocol == UAC_VERSION_1) ?
 		&desc->baSourceID[desc->bNrInPins + 5] :
-		&desc->baSourceID[desc->bNrInPins + 7];
+		&desc->baSourceID[desc->bNrInPins + 6];
 }
 
 static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc,

[PATCH 3.18 02/93] ALSA: aloop: Sync stale timer before release

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 67a01afaf3d34893cf7d2ea19b34555d6abb7cb0 upstream.

The aloop driver tries to stop the pending timer via timer_del() in
the trigger callback and in the close callback.  The former is
correct, as it's an atomic operation, while the latter expects that
the timer gets really removed and proceeds the resource releases after
that.  But timer_del() doesn't synchronize, hence the running timer
may still access the released resources.

A similar situation can be also seen in the prepare callback after
trigger(STOP) where the prepare tries to re-initialize the things
while a timer is still running.

The problems like the above are seen indirectly in some syzkaller
reports (although it's not 100% clear whether this is the only cause,
as the race condition is quite narrow and not always easy to
trigger).

For addressing these issues, this patch adds the explicit alls of
timer_del_sync() in some places, so that the pending timer is properly
killed / synced.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/drivers/aloop.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -193,6 +193,11 @@ static inline void loopback_timer_stop(s
 	dpcm->timer.expires = 0;
 }
 
+static inline void loopback_timer_stop_sync(struct loopback_pcm *dpcm)
+{
+	del_timer_sync(&dpcm->timer);
+}
+
 #define CABLE_VALID_PLAYBACK	(1 << SNDRV_PCM_STREAM_PLAYBACK)
 #define CABLE_VALID_CAPTURE	(1 << SNDRV_PCM_STREAM_CAPTURE)
 #define CABLE_VALID_BOTH	(CABLE_VALID_PLAYBACK|CABLE_VALID_CAPTURE)
@@ -327,6 +332,8 @@ static int loopback_prepare(struct snd_p
 	struct loopback_cable *cable = dpcm->cable;
 	int bps, salign;
 
+	loopback_timer_stop_sync(dpcm);
+
 	salign = (snd_pcm_format_width(runtime->format) *
 						runtime->channels) / 8;
 	bps = salign * runtime->rate;
@@ -746,7 +753,7 @@ static int loopback_close(struct snd_pcm
 	struct loopback *loopback = substream->private_data;
 	struct loopback_pcm *dpcm = substream->runtime->private_data;
 
-	loopback_timer_stop(dpcm);
+	loopback_timer_stop_sync(dpcm);
 	mutex_lock(&loopback->cable_lock);
 	free_cable(substream);
 	mutex_unlock(&loopback->cable_lock);

[PATCH 3.18 03/93] ALSA: aloop: Fix access to not-yet-ready substream via cable

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 8e6b1a72a75bb5067ccb6b56d8ca4aa3a300a64e upstream.

In loopback_open() and loopback_close(), we assign and release the
substream object to the corresponding cable in a racy way.  It's
neither locked nor done in the right position.  The open callback
assigns the substream before its preparation finishes, hence the other
side of the cable may pick it up, which may lead to the invalid memory
access.

This patch addresses these: move the assignment to the end of the open
callback, and wrap with cable->lock for avoiding concurrent accesses.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/drivers/aloop.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -667,7 +667,9 @@ static void free_cable(struct snd_pcm_su
 		return;
 	if (cable->streams[!substream->stream]) {
 		/* other stream is still alive */
+		spin_lock_irq(&cable->lock);
 		cable->streams[substream->stream] = NULL;
+		spin_unlock_irq(&cable->lock);
 	} else {
 		/* free the cable */
 		loopback->cables[substream->number][dev] = NULL;
@@ -707,7 +709,6 @@ static int loopback_open(struct snd_pcm_
 		loopback->cables[substream->number][dev] = cable;
 	}
 	dpcm->cable = cable;
-	cable->streams[substream->stream] = dpcm;
 
 	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
 
@@ -739,6 +740,11 @@ static int loopback_open(struct snd_pcm_
 		runtime->hw = loopback_pcm_hardware;
 	else
 		runtime->hw = cable->hw;
+
+	spin_lock_irq(&cable->lock);
+	cable->streams[substream->stream] = dpcm;
+	spin_unlock_irq(&cable->lock);
+
  unlock:
 	if (err < 0) {
 		free_cable(substream);

[PATCH 3.18 04/93] libata: fix length validation of ATAPI-relayed SCSI commands

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 058f58e235cbe03e923b30ea7c49995a46a8725f upstream.

syzkaller reported a crash in ata_bmdma_fill_sg() when writing to
/dev/sg1.  The immediate cause was that the ATA command's scatterlist
was not DMA-mapped, which causes 'pi - 1' to underflow, resulting in a
write to 'qc->ap->bmdma_prd[0xffffffff]'.

Strangely though, the flag ATA_QCFLAG_DMAMAP was set in qc->flags.  The
root cause is that when __ata_scsi_queuecmd() is preparing to relay a
SCSI command to an ATAPI device, it doesn't correctly validate the CDB
length before copying it into the 16-byte buffer 'cdb' in 'struct
ata_queued_cmd'.  Namely, it validates the fixed CDB length expected
based on the SCSI opcode but not the actual CDB length, which can be
larger due to the use of the SG_NEXT_CMD_LEN ioctl.  Since 'flags' is
the next member in ata_queued_cmd, a buffer overflow corrupts it.

Fix it by requiring that the actual CDB length be <= 16 (ATAPI_CDB_LEN).

[Really it seems the length should be required to be <= dev->cdb_len,
but the current behavior seems to have been intentionally introduced by
commit 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands
in 16-byte CDBs") to work around a userspace bug in mplayer.  Probably
the workaround is no longer needed (mplayer was fixed in 2007), but
continuing to allow lengths to up 16 appears harmless for now.]

Here's a reproducer that works in QEMU when /dev/sg1 refers to the
CD-ROM drive that qemu-system-x86_64 creates by default:

    #include <fcntl.h>
    #include <sys/ioctl.h>
    #include <unistd.h>

    #define SG_NEXT_CMD_LEN 0x2283

    int main()
    {
	    char buf[53] = { [36] = 0x7e, [52] = 0x02 };
	    int fd = open("/dev/sg1", O_RDWR);
	    ioctl(fd, SG_NEXT_CMD_LEN, &(int){ 17 });
	    write(fd, buf, sizeof(buf));
    }

The crash was:

    BUG: unable to handle kernel paging request at ffff8cb97db37ffc
    IP: ata_bmdma_fill_sg drivers/ata/libata-sff.c:2623 [inline]
    IP: ata_bmdma_qc_prep+0xa4/0xc0 drivers/ata/libata-sff.c:2727
    PGD fb6c067 P4D fb6c067 PUD 0
    Oops: 0002 [#1] SMP
    CPU: 1 PID: 150 Comm: syz_ata_bmdma_q Not tainted 4.15.0-next-20180202 #99
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    [...]
    Call Trace:
     ata_qc_issue+0x100/0x1d0 drivers/ata/libata-core.c:5421
     ata_scsi_translate+0xc9/0x1a0 drivers/ata/libata-scsi.c:2024
     __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4326 [inline]
     ata_scsi_queuecmd+0x8c/0x210 drivers/ata/libata-scsi.c:4375
     scsi_dispatch_cmd+0xa2/0xe0 drivers/scsi/scsi_lib.c:1727
     scsi_request_fn+0x24c/0x530 drivers/scsi/scsi_lib.c:1865
     __blk_run_queue_uncond block/blk-core.c:412 [inline]
     __blk_run_queue+0x3a/0x60 block/blk-core.c:432
     blk_execute_rq_nowait+0x93/0xc0 block/blk-exec.c:78
     sg_common_write.isra.7+0x272/0x5a0 drivers/scsi/sg.c:806
     sg_write+0x1ef/0x340 drivers/scsi/sg.c:677
     __vfs_write+0x31/0x160 fs/read_write.c:480
     vfs_write+0xa7/0x160 fs/read_write.c:544
     SYSC_write fs/read_write.c:589 [inline]
     SyS_write+0x4d/0xc0 fs/read_write.c:581
     do_syscall_64+0x5e/0x110 arch/x86/entry/common.c:287
     entry_SYSCALL_64_after_hwframe+0x21/0x86

Fixes: 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs")
Reported-by: syzbot+1ff6f9fcc3c35f1c72a95e26528c8e7e3276e4da@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # v2.6.24+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-scsi.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3429,7 +3429,9 @@ static inline int __ata_scsi_queuecmd(st
 		if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
 			/* relay SCSI command to ATAPI device */
 			int len = COMMAND_SIZE(scsi_op);
-			if (unlikely(len > scmd->cmd_len || len > dev->cdb_len))
+			if (unlikely(len > scmd->cmd_len ||
+				     len > dev->cdb_len ||
+				     scmd->cmd_len > ATAPI_CDB_LEN))
 				goto bad_cdb_len;
 
 			xlat_func = atapi_xlat;

[PATCH 3.18 05/93] libata: remove WARN() for DMA or PIO command without data

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 9173e5e80729c8434b8d27531527c5245f4a5594 upstream.

syzkaller hit a WARN() in ata_qc_issue() when writing to /dev/sg0.  This
happened because it issued a READ_6 command with no data buffer.

Just remove the WARN(), as it doesn't appear indicate a kernel bug.  The
expected behavior is to fail the command, which the code does.

Here's a reproducer that works in QEMU when /dev/sg0 refers to a disk of
the default type ("82371SB PIIX3 IDE"):

    #include <fcntl.h>
    #include <unistd.h>

    int main()
    {
            char buf[42] = { [36] = 0x8 /* READ_6 */ };

            write(open("/dev/sg0", O_RDWR), buf, sizeof(buf));
    }

Fixes: f92a26365a72 ("libata: change ATA_QCFLAG_DMAMAP semantics")
Reported-by: syzbot+f7b556d1766502a69d85071d2ff08bd87be53d0f@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # v2.6.25+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5109,8 +5109,7 @@ void ata_qc_issue(struct ata_queued_cmd
 	 * We guarantee to LLDs that they will have at least one
 	 * non-zero sg if the command is a data command.
 	 */
-	if (WARN_ON_ONCE(ata_is_data(prot) &&
-			 (!qc->sg || !qc->n_elem || !qc->nbytes)))
+	if (ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes))
 		goto sys_err;
 
 	if (ata_is_dma(prot) || (ata_is_pio(prot) &&

[PATCH 3.18 06/93] libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 9c7be59fc519af9081c46c48f06f2b8fadf55ad8 upstream.

Various people have reported the Crucial MX100 512GB model not working
with LPM set to min_power. I've now received a report that it also does
not work with the new med_power_with_dipm level.

It does work with medium_power, but that has no measurable power-savings
and given the amount of people being bitten by the other levels not
working, this commit just disables LPM altogether.

Note all reporters of this have either the 512GB model (max capacity), or
are not specifying their SSD's size. So for now this quirk assumes this is
a problem with the 512GB model only.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=89261
Buglink: https://github.com/linrunner/TLP/issues/84
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4225,6 +4225,11 @@ static const struct ata_blacklist_entry
 	{ "PIONEER DVD-RW  DVR-212D",	NULL,	ATA_HORKAGE_NOSETXFER },
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
+	/* The 512GB version of the MX100 has both queued TRIM and LPM issues */
+	{ "Crucial_CT512MX100*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
+
 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500_*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },

[PATCH 3.18 07/93] libata: disable LPM for Crucial BX100 SSD 500GB drive

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit b17e5729a630d8326a48ec34ef02e6b4464a6aef upstream.

After Laptop Mode Tools starts to use min_power for LPM, a user found
out Crucial BX100 SSD can't get mounted.

Crucial BX100 SSD 500GB drive don't work well with min_power. This also
happens to med_power_with_dipm.

So let's disable LPM for Crucial BX100 SSD 500GB drive.

BugLink: https://bugs.launchpad.net/bugs/1726930
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4225,6 +4225,9 @@ static const struct ata_blacklist_entry
 	{ "PIONEER DVD-RW  DVR-212D",	NULL,	ATA_HORKAGE_NOSETXFER },
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
+	/* Crucial BX100 SSD 500GB has broken LPM support */
+	{ "CT500BX100SSD1",		"MU02",	ATA_HORKAGE_NOLPM },
+
 	/* The 512GB version of the MX100 has both queued TRIM and LPM issues */
 	{ "Crucial_CT512MX100*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM |

[PATCH 3.18 08/93] libata: Enable queued TRIM for Samsung SSD 860

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ju Hyung Park <qkrwngud825@gmail.com>

commit ca6bfcb2f6d9deab3924bf901e73622a94900473 upstream.

Samsung explicitly states that queued TRIM is supported for Linux with
860 PRO and 860 EVO.

Make the previous blacklist to cover only 840 and 850 series.

Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4244,7 +4244,9 @@ static const struct ata_blacklist_entry
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*MX100*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
-	{ "Samsung SSD 8*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+	{ "Samsung SSD 840*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Samsung SSD 850*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "FCCT*M500*",			NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },

[PATCH 3.18 09/93] libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 62ac3f7305470e3f52f159de448bc1a771717e88 upstream.

There have been reports of the Crucial M500 480GB model not working
with LPM set to min_power / med_power_with_dipm level.

It has not been tested with medium_power, but that typically has no
measurable power-savings.

Note the reporters Crucial_CT480M500SSD3 has a firmware version of MU03
and there is a MU05 update available, but that update does not mention any
LPM fixes in its changelog, so the quirk matches all firmware versions.

In my experience the LPM problems with (older) Crucial SSDs seem to be
limited to higher capacity versions of the SSDs (different firmware?),
so this commit adds a NOLPM quirk for the 480 and 960GB versions of the
M500, to avoid LPM causing issues with these SSDs.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4233,6 +4233,14 @@ static const struct ata_blacklist_entry
 						ATA_HORKAGE_ZERO_AFTER_TRIM |
 						ATA_HORKAGE_NOLPM, },
 
+	/* 480GB+ M500 SSDs have both queued TRIM and LPM issues */
+	{ "Crucial_CT480M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
+	{ "Crucial_CT960M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
+
 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500_*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },

[PATCH 3.18 10/93] libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 3bf7b5d6d017c27e0d3b160aafb35a8e7cfeda1f upstream.

Commit b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB
drive"), introduced a ATA_HORKAGE_NOLPM quirk for Crucial BX100 500GB SSDs
but limited this to the MU02 firmware version, according to:
http://www.crucial.com/usa/en/support-ssd-firmware

MU02 is the last version, so there are no newer possibly fixed versions
and if the MU02 version has broken LPM then the MU01 almost certainly
also has broken LPM, so this commit changes the quirk to apply to all
firmware versions.

Fixes: b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB...")
Cc: stable@vger.kernel.org
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4226,7 +4226,7 @@ static const struct ata_blacklist_entry
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
 	/* Crucial BX100 SSD 500GB has broken LPM support */
-	{ "CT500BX100SSD1",		"MU02",	ATA_HORKAGE_NOLPM },
+	{ "CT500BX100SSD1",		NULL,	ATA_HORKAGE_NOLPM },
 
 	/* The 512GB version of the MX100 has both queued TRIM and LPM issues */
 	{ "Crucial_CT512MX100*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM |

[PATCH 3.18 11/93] libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit d418ff56b8f2d2b296daafa8da151fe27689b757 upstream.

When commit 9c7be59fc519af ("libata: Apply NOLPM quirk to Crucial MX100
512GB SSDs") was added it inherited the ATA_HORKAGE_NO_NCQ_TRIM quirk
from the existing "Crucial_CT*MX100*" entry, but that entry sets model_rev
to "MU01", where as the entry adding the NOLPM quirk sets it to NULL.

This means that after this commit we no apply the NO_NCQ_TRIM quirk to
all "Crucial_CT512MX100*" SSDs even if they have the fixed "MU02"
firmware. This commit splits the "Crucial_CT512MX100*" quirk into 2
quirks, one for the "MU01" firmware and one for all other firmware
versions, so that we once again only apply the NO_NCQ_TRIM quirk to the
"MU01" firmware version.

Fixes: 9c7be59fc519af ("libata: Apply NOLPM quirk to ... MX100 512GB SSDs")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4228,10 +4228,13 @@ static const struct ata_blacklist_entry
 	/* Crucial BX100 SSD 500GB has broken LPM support */
 	{ "CT500BX100SSD1",		NULL,	ATA_HORKAGE_NOLPM },
 
-	/* The 512GB version of the MX100 has both queued TRIM and LPM issues */
-	{ "Crucial_CT512MX100*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+	/* 512GB MX100 with MU01 firmware has both queued TRIM and LPM issues */
+	{ "Crucial_CT512MX100*",	"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM |
 						ATA_HORKAGE_NOLPM, },
+	/* 512GB MX100 with newer firmware has only LPM issues */
+	{ "Crucial_CT512MX100*",	NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
 
 	/* 480GB+ M500 SSDs have both queued TRIM and LPM issues */
 	{ "Crucial_CT480M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |

[PATCH 3.18 12/93] drm: udl: Properly check framebuffer mmap offsets

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3b82a4db8eaccce735dffd50b4d4e1578099b8e8 upstream.

The memmap options sent to the udl framebuffer driver were not being
checked for all sets of possible crazy values.  Fix this up by properly
bounding the allowed values.

Reported-by: Eyal Itkin <eyalit@checkpoint.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321154553.GA18454@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/udl/udl_fb.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/udl/udl_fb.c
+++ b/drivers/gpu/drm/udl/udl_fb.c
@@ -256,10 +256,15 @@ static int udl_fb_mmap(struct fb_info *i
 {
 	unsigned long start = vma->vm_start;
 	unsigned long size = vma->vm_end - vma->vm_start;
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long offset;
 	unsigned long page, pos;
 
-	if (offset + size > info->fix.smem_len)
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+
+	offset = vma->vm_pgoff << PAGE_SHIFT;
+
+	if (offset > info->fix.smem_len || size > info->fix.smem_len - offset)
 		return -EINVAL;
 
 	pos = (unsigned long)info->fix.smem_start + offset;

[PATCH 3.18 13/93] brcmfmac: fix P2P_DEVICE ethernet address generation

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arend Van Spriel <arend.vanspriel@broadcom.com>

commit 455f3e76cfc0d893585a5f358b9ddbe9c1e1e53b upstream.

The firmware has a requirement that the P2P_DEVICE address should
be different from the address of the primary interface. When not
specified by user-space, the driver generates the MAC address for
the P2P_DEVICE interface using the MAC address of the primary
interface and setting the locally administered bit. However, the MAC
address of the primary interface may already have that bit set causing
the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this
by using a random address instead to determine the P2P_DEVICE address.

Cc: stable@vger.kernel.org # 3.10.y
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/brcm80211/brcmfmac/p2p.c |   24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

--- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
@@ -460,25 +460,23 @@ static int brcmf_p2p_set_firmware(struct
  * @dev_addr: optional device address.
  *
  * P2P needs mac addresses for P2P device and interface. If no device
- * address it specified, these are derived from the primary net device, ie.
- * the permanent ethernet address of the device.
+ * address it specified, these are derived from a random ethernet
+ * address.
  */
 static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p, u8 *dev_addr)
 {
-	struct brcmf_if *pri_ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp;
-	bool local_admin = false;
+	bool random_addr = false;
 
-	if (!dev_addr || is_zero_ether_addr(dev_addr)) {
-		dev_addr = pri_ifp->mac_addr;
-		local_admin = true;
-	}
+	if (!dev_addr || is_zero_ether_addr(dev_addr))
+		random_addr = true;
 
-	/* Generate the P2P Device Address.  This consists of the device's
-	 * primary MAC address with the locally administered bit set.
+	/* Generate the P2P Device Address obtaining a random ethernet
+	 * address with the locally administered bit set.
 	 */
-	memcpy(p2p->dev_addr, dev_addr, ETH_ALEN);
-	if (local_admin)
-		p2p->dev_addr[0] |= 0x02;
+	if (random_addr)
+		eth_random_addr(p2p->dev_addr);
+	else
+		memcpy(p2p->dev_addr, dev_addr, ETH_ALEN);
 
 	/* Generate the P2P Interface Address.  If the discovery and connection
 	 * BSSCFGs need to simultaneously co-exist, then this address must be

[PATCH 3.18 14/93] tracing: probeevent: Fix to support minus offset from symbol

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

commit c5d343b6b7badd1f5fe0873eff2e8d63a193e732 upstream.

In Documentation/trace/kprobetrace.txt, it says

 @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)

However, the parser doesn't parse minus offset correctly, since
commit 2fba0c8867af ("tracing/kprobes: Fix probe offset to be
unsigned") drops minus ("-") offset support for kprobe probe
address usage.

This fixes the traceprobe_split_symbol_offset() to parse minus
offset again with checking the offset range, and add a minus
offset check in kprobe probe address usage.

Link: http://lkml.kernel.org/r/152129028983.31874.13419301530285775521.stgit@devbox

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 2fba0c8867af ("tracing/kprobes: Fix probe offset to be unsigned")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace_kprobe.c |    4 ++--
 kernel/trace/trace_probe.c  |    8 +++-----
 kernel/trace/trace_probe.h  |    2 +-
 3 files changed, 6 insertions(+), 8 deletions(-)

--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -611,7 +611,7 @@ static int create_trace_kprobe(int argc,
 	bool is_return = false, is_delete = false;
 	char *symbol = NULL, *event = NULL, *group = NULL;
 	char *arg;
-	unsigned long offset = 0;
+	long offset = 0;
 	void *addr = NULL;
 	char buf[MAX_EVENT_NAME_LEN];
 
@@ -679,7 +679,7 @@ static int create_trace_kprobe(int argc,
 		symbol = argv[1];
 		/* TODO: support .init module functions */
 		ret = traceprobe_split_symbol_offset(symbol, &offset);
-		if (ret) {
+		if (ret || offset < 0 || offset > UINT_MAX) {
 			pr_info("Failed to parse either an address or a symbol.\n");
 			return ret;
 		}
--- a/kernel/trace/trace_probe.c
+++ b/kernel/trace/trace_probe.c
@@ -291,7 +291,7 @@ static fetch_func_t get_fetch_size_funct
 }
 
 /* Split symbol and offset. */
-int traceprobe_split_symbol_offset(char *symbol, unsigned long *offset)
+int traceprobe_split_symbol_offset(char *symbol, long *offset)
 {
 	char *tmp;
 	int ret;
@@ -299,13 +299,11 @@ int traceprobe_split_symbol_offset(char
 	if (!offset)
 		return -EINVAL;
 
-	tmp = strchr(symbol, '+');
+	tmp = strpbrk(symbol, "+-");
 	if (tmp) {
-		/* skip sign because kstrtoul doesn't accept '+' */
-		ret = kstrtoul(tmp + 1, 0, offset);
+		ret = kstrtol(tmp, 0, offset);
 		if (ret)
 			return ret;
-
 		*tmp = '\0';
 	} else
 		*offset = 0;
--- a/kernel/trace/trace_probe.h
+++ b/kernel/trace/trace_probe.h
@@ -341,7 +341,7 @@ extern int traceprobe_conflict_field_nam
 extern void traceprobe_update_arg(struct probe_arg *arg);
 extern void traceprobe_free_probe_arg(struct probe_arg *arg);
 
-extern int traceprobe_split_symbol_offset(char *symbol, unsigned long *offset);
+extern int traceprobe_split_symbol_offset(char *symbol, long *offset);
 
 extern ssize_t traceprobe_probes_write(struct file *file,
 		const char __user *buffer, size_t count, loff_t *ppos,

[PATCH 3.18 15/93] staging: ncpfs: memory corruption in ncp_read_kernel()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 4c41aa24baa4ed338241d05494f2c595c885af8f upstream.

If the server is malicious then *bytes_read could be larger than the
size of the "target" buffer.  It would lead to memory corruption when we
do the memcpy().

Reported-by: Dr Silvio Cesare of InfoSect <Silvio Cesare <silvio.cesare@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ncpfs/ncplib_kernel.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/ncpfs/ncplib_kernel.c
+++ b/fs/ncpfs/ncplib_kernel.c
@@ -980,6 +980,10 @@ ncp_read_kernel(struct ncp_server *serve
 		goto out;
 	}
 	*bytes_read = ncp_reply_be16(server, 0);
+	if (*bytes_read > to_read) {
+		result = -EINVAL;
+		goto out;
+	}
 	source = ncp_reply_data(server, 2 + (offset & 1));
 
 	memcpy(target, source, *bytes_read);

[PATCH 3.18 16/93] can: cc770: Fix stalls on rt-linux, remove redundant IRQ ack

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andri Yngvason <andri.yngvason@marel.com>

commit f4353daf4905c0099fd25fa742e2ffd4a4bab26a upstream.

This has been reported to cause stalls on rt-linux.

Suggested-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/cc770/cc770.c |   15 ---------------
 1 file changed, 15 deletions(-)

--- a/drivers/net/can/cc770/cc770.c
+++ b/drivers/net/can/cc770/cc770.c
@@ -447,15 +447,6 @@ static netdev_tx_t cc770_start_xmit(stru
 
 	stats->tx_bytes += dlc;
 
-
-	/*
-	 * HM: We had some cases of repeated IRQs so make sure the
-	 * INT is acknowledged I know it's already further up, but
-	 * doing again fixed the issue
-	 */
-	cc770_write_reg(priv, msgobj[mo].ctrl0,
-			MSGVAL_UNC | TXIE_UNC | RXIE_UNC | INTPND_RES);
-
 	return NETDEV_TX_OK;
 }
 
@@ -683,12 +674,6 @@ static void cc770_tx_interrupt(struct ne
 	/* Nothing more to send, switch off interrupts */
 	cc770_write_reg(priv, msgobj[mo].ctrl0,
 			MSGVAL_RES | TXIE_RES | RXIE_RES | INTPND_RES);
-	/*
-	 * We had some cases of repeated IRQ so make sure the
-	 * INT is acknowledged
-	 */
-	cc770_write_reg(priv, msgobj[mo].ctrl0,
-			MSGVAL_UNC | TXIE_UNC | RXIE_UNC | INTPND_RES);
 
 	stats->tx_packets++;
 	can_get_echo_skb(dev, 0);

[PATCH 3.18 17/93] can: cc770: Fix queue stall & dropped RTR reply

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andri Yngvason <andri.yngvason@marel.com>

commit 746201235b3f876792099079f4c6fea941d76183 upstream.

While waiting for the TX object to send an RTR, an external message with a
matching id can overwrite the TX data. In this case we must call the rx
routine and then try transmitting the message that was overwritten again.

The queue was being stalled because the RX event did not generate an
interrupt to wake up the queue again and the TX event did not happen
because the TXRQST flag is reset by the chip when new data is received.

According to the CC770 datasheet the id of a message object should not be
changed while the MSGVAL bit is set. This has been fixed by resetting the
MSGVAL bit before modifying the object in the transmit function and setting
it after. It is not enough to set & reset CPUUPD.

It is important to keep the MSGVAL bit reset while the message object is
being modified. Otherwise, during RTR transmission, a frame with matching
id could trigger an rx-interrupt, which would cause a race condition
between the interrupt routine and the transmit function.

Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Tested-by: Richard Weinberger <richard@nod.at>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/cc770/cc770.c |   94 +++++++++++++++++++++++++++++-------------
 drivers/net/can/cc770/cc770.h |    2 
 2 files changed, 68 insertions(+), 28 deletions(-)

--- a/drivers/net/can/cc770/cc770.c
+++ b/drivers/net/can/cc770/cc770.c
@@ -390,37 +390,23 @@ static int cc770_get_berr_counter(const
 	return 0;
 }
 
-static netdev_tx_t cc770_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static void cc770_tx(struct net_device *dev, int mo)
 {
 	struct cc770_priv *priv = netdev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-	struct can_frame *cf = (struct can_frame *)skb->data;
-	unsigned int mo = obj2msgobj(CC770_OBJ_TX);
+	struct can_frame *cf = (struct can_frame *)priv->tx_skb->data;
 	u8 dlc, rtr;
 	u32 id;
 	int i;
 
-	if (can_dropped_invalid_skb(dev, skb))
-		return NETDEV_TX_OK;
-
-	if ((cc770_read_reg(priv,
-			    msgobj[mo].ctrl1) & TXRQST_UNC) == TXRQST_SET) {
-		netdev_err(dev, "TX register is still occupied!\n");
-		return NETDEV_TX_BUSY;
-	}
-
-	netif_stop_queue(dev);
-
 	dlc = cf->can_dlc;
 	id = cf->can_id;
-	if (cf->can_id & CAN_RTR_FLAG)
-		rtr = 0;
-	else
-		rtr = MSGCFG_DIR;
+	rtr = cf->can_id & CAN_RTR_FLAG ? 0 : MSGCFG_DIR;
+
+	cc770_write_reg(priv, msgobj[mo].ctrl0,
+			MSGVAL_RES | TXIE_RES | RXIE_RES | INTPND_RES);
 	cc770_write_reg(priv, msgobj[mo].ctrl1,
 			RMTPND_RES | TXRQST_RES | CPUUPD_SET | NEWDAT_RES);
-	cc770_write_reg(priv, msgobj[mo].ctrl0,
-			MSGVAL_SET | TXIE_SET | RXIE_RES | INTPND_RES);
+
 	if (id & CAN_EFF_FLAG) {
 		id &= CAN_EFF_MASK;
 		cc770_write_reg(priv, msgobj[mo].config,
@@ -439,13 +425,30 @@ static netdev_tx_t cc770_start_xmit(stru
 	for (i = 0; i < dlc; i++)
 		cc770_write_reg(priv, msgobj[mo].data[i], cf->data[i]);
 
-	/* Store echo skb before starting the transfer */
-	can_put_echo_skb(skb, dev, 0);
-
 	cc770_write_reg(priv, msgobj[mo].ctrl1,
-			RMTPND_RES | TXRQST_SET | CPUUPD_RES | NEWDAT_UNC);
+			RMTPND_UNC | TXRQST_SET | CPUUPD_RES | NEWDAT_UNC);
+	cc770_write_reg(priv, msgobj[mo].ctrl0,
+			MSGVAL_SET | TXIE_SET | RXIE_SET | INTPND_UNC);
+}
+
+static netdev_tx_t cc770_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct cc770_priv *priv = netdev_priv(dev);
+	unsigned int mo = obj2msgobj(CC770_OBJ_TX);
+
+	if (can_dropped_invalid_skb(dev, skb))
+		return NETDEV_TX_OK;
+
+	netif_stop_queue(dev);
+
+	if ((cc770_read_reg(priv,
+			    msgobj[mo].ctrl1) & TXRQST_UNC) == TXRQST_SET) {
+		netdev_err(dev, "TX register is still occupied!\n");
+		return NETDEV_TX_BUSY;
+	}
 
-	stats->tx_bytes += dlc;
+	priv->tx_skb = skb;
+	cc770_tx(dev, mo);
 
 	return NETDEV_TX_OK;
 }
@@ -670,13 +673,47 @@ static void cc770_tx_interrupt(struct ne
 	struct cc770_priv *priv = netdev_priv(dev);
 	struct net_device_stats *stats = &dev->stats;
 	unsigned int mo = obj2msgobj(o);
+	struct can_frame *cf;
+	u8 ctrl1;
+
+	ctrl1 = cc770_read_reg(priv, msgobj[mo].ctrl1);
 
-	/* Nothing more to send, switch off interrupts */
 	cc770_write_reg(priv, msgobj[mo].ctrl0,
 			MSGVAL_RES | TXIE_RES | RXIE_RES | INTPND_RES);
+	cc770_write_reg(priv, msgobj[mo].ctrl1,
+			RMTPND_RES | TXRQST_RES | MSGLST_RES | NEWDAT_RES);
 
-	stats->tx_packets++;
+	if (unlikely(!priv->tx_skb)) {
+		netdev_err(dev, "missing tx skb in tx interrupt\n");
+		return;
+	}
+
+	if (unlikely(ctrl1 & MSGLST_SET)) {
+		stats->rx_over_errors++;
+		stats->rx_errors++;
+	}
+
+	/* When the CC770 is sending an RTR message and it receives a regular
+	 * message that matches the id of the RTR message, it will overwrite the
+	 * outgoing message in the TX register. When this happens we must
+	 * process the received message and try to transmit the outgoing skb
+	 * again.
+	 */
+	if (unlikely(ctrl1 & NEWDAT_SET)) {
+		cc770_rx(dev, mo, ctrl1);
+		cc770_tx(dev, mo);
+		return;
+	}
+
+	can_put_echo_skb(priv->tx_skb, dev, 0);
 	can_get_echo_skb(dev, 0);
+
+	cf = (struct can_frame *)priv->tx_skb->data;
+	stats->tx_bytes += cf->can_dlc;
+	stats->tx_packets++;
+
+	priv->tx_skb = NULL;
+
 	netif_wake_queue(dev);
 }
 
@@ -788,6 +825,7 @@ struct net_device *alloc_cc770dev(int si
 	priv->can.do_set_bittiming = cc770_set_bittiming;
 	priv->can.do_set_mode = cc770_set_mode;
 	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
+	priv->tx_skb = NULL;
 
 	memcpy(priv->obj_flags, cc770_obj_flags, sizeof(cc770_obj_flags));
 
--- a/drivers/net/can/cc770/cc770.h
+++ b/drivers/net/can/cc770/cc770.h
@@ -193,6 +193,8 @@ struct cc770_priv {
 	u8 cpu_interface;	/* CPU interface register */
 	u8 clkout;		/* Clock out register */
 	u8 bus_config;		/* Bus conffiguration register */
+
+	struct sk_buff *tx_skb;
 };
 
 struct net_device *alloc_cc770dev(int sizeof_priv);

[PATCH 3.18 18/93] can: cc770: Fix use after free in cc770_tx_interrupt()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andri Yngvason <andri.yngvason@marel.com>

commit 9ffd7503944ec7c0ef41c3245d1306c221aef2be upstream.

This fixes use after free introduced by the last cc770 patch.

Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Fixes: 746201235b3f ("can: cc770: Fix queue stall & dropped RTR reply")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/cc770/cc770.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/net/can/cc770/cc770.c
+++ b/drivers/net/can/cc770/cc770.c
@@ -705,13 +705,12 @@ static void cc770_tx_interrupt(struct ne
 		return;
 	}
 
-	can_put_echo_skb(priv->tx_skb, dev, 0);
-	can_get_echo_skb(dev, 0);
-
 	cf = (struct can_frame *)priv->tx_skb->data;
 	stats->tx_bytes += cf->can_dlc;
 	stats->tx_packets++;
 
+	can_put_echo_skb(priv->tx_skb, dev, 0);
+	can_get_echo_skb(dev, 0);
 	priv->tx_skb = NULL;
 
 	netif_wake_queue(dev);

[PATCH 3.18 19/93] tty: vt: fix up tabstops properly

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit f1869a890cdedb92a3fab969db5d0fd982850273 upstream.

Tabs on a console with long lines do not wrap properly, so correctly
account for the line length when computing the tab placement location.

Reported-by: James Holderness <j4_james@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/vt/vt.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1705,7 +1705,7 @@ static void reset_terminal(struct vc_dat
 	default_attr(vc);
 	update_attr(vc);
 
-	vc->vc_tab_stop[0]	= 0x01010100;
+	vc->vc_tab_stop[0]	=
 	vc->vc_tab_stop[1]	=
 	vc->vc_tab_stop[2]	=
 	vc->vc_tab_stop[3]	=
@@ -1748,7 +1748,7 @@ static void do_con_trol(struct tty_struc
 		vc->vc_pos -= (vc->vc_x << 1);
 		while (vc->vc_x < vc->vc_cols - 1) {
 			vc->vc_x++;
-			if (vc->vc_tab_stop[vc->vc_x >> 5] & (1 << (vc->vc_x & 31)))
+			if (vc->vc_tab_stop[7 & (vc->vc_x >> 5)] & (1 << (vc->vc_x & 31)))
 				break;
 		}
 		vc->vc_pos += (vc->vc_x << 1);
@@ -1808,7 +1808,7 @@ static void do_con_trol(struct tty_struc
 			lf(vc);
 			return;
 		case 'H':
-			vc->vc_tab_stop[vc->vc_x >> 5] |= (1 << (vc->vc_x & 31));
+			vc->vc_tab_stop[7 & (vc->vc_x >> 5)] |= (1 << (vc->vc_x & 31));
 			return;
 		case 'Z':
 			respond_ID(tty);
@@ -2001,7 +2001,7 @@ static void do_con_trol(struct tty_struc
 			return;
 		case 'g':
 			if (!vc->vc_par[0])
-				vc->vc_tab_stop[vc->vc_x >> 5] &= ~(1 << (vc->vc_x & 31));
+				vc->vc_tab_stop[7 & (vc->vc_x >> 5)] &= ~(1 << (vc->vc_x & 31));
 			else if (vc->vc_par[0] == 3) {
 				vc->vc_tab_stop[0] =
 					vc->vc_tab_stop[1] =

[PATCH 3.18 20/93] kvm/x86: fix icebp instruction handling

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 32d43cd391bacb5f0814c2624399a5dad3501d09 upstream.

The undocumented 'icebp' instruction (aka 'int1') works pretty much like
'int3' in the absense of in-circuit probing equipment (except,
obviously, that it raises #DB instead of raising #BP), and is used by
some validation test-suites as such.

But Andy Lutomirski noticed that his test suite acted differently in kvm
than on bare hardware.

The reason is that kvm used an inexact test for the icebp instruction:
it just assumed that an all-zero VM exit qualification value meant that
the VM exit was due to icebp.

That is not unlike the guess that do_debug() does for the actual
exception handling case, but it's purely a heuristic, not an absolute
rule.  do_debug() does it because it wants to ascribe _some_ reasons to
the #DB that happened, and an empty %dr6 value means that 'icebp' is the
most likely casue and we have no better information.

But kvm can just do it right, because unlike the do_debug() case, kvm
actually sees the real reason for the #DB in the VM-exit interruption
information field.

So instead of relying on an inexact heuristic, just use the actual VM
exit information that says "it was 'icebp'".

Right now the 'icebp' instruction isn't technically documented by Intel,
but that will hopefully change.  The special "privileged software
exception" information _is_ actually mentioned in the Intel SDM, even
though the cause of it isn't enumerated.

Reported-by: Andy Lutomirski <luto@kernel.org>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/vmx.h |    1 +
 arch/x86/kvm/vmx.c         |    9 ++++++++-
 2 files changed, 9 insertions(+), 1 deletion(-)

--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -299,6 +299,7 @@ enum vmcs_field {
 #define INTR_TYPE_NMI_INTR		(2 << 8) /* NMI */
 #define INTR_TYPE_HARD_EXCEPTION	(3 << 8) /* processor exception */
 #define INTR_TYPE_SOFT_INTR             (4 << 8) /* software interrupt */
+#define INTR_TYPE_PRIV_SW_EXCEPTION	(5 << 8) /* ICE breakpoint - undocumented */
 #define INTR_TYPE_SOFT_EXCEPTION	(6 << 8) /* software exception */
 
 /* GUEST_INTERRUPTIBILITY_INFO flags. */
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -883,6 +883,13 @@ static inline bool is_machine_check(u32
 		(INTR_TYPE_HARD_EXCEPTION | MC_VECTOR | INTR_INFO_VALID_MASK);
 }
 
+/* Undocumented: icebp/int1 */
+static inline bool is_icebp(u32 intr_info)
+{
+	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
+		== (INTR_TYPE_PRIV_SW_EXCEPTION | INTR_INFO_VALID_MASK);
+}
+
 static inline bool cpu_has_vmx_msr_bitmap(void)
 {
 	return vmcs_config.cpu_based_exec_ctrl & CPU_BASED_USE_MSR_BITMAPS;
@@ -4951,7 +4958,7 @@ static int handle_exception(struct kvm_v
 		      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) {
 			vcpu->arch.dr6 &= ~15;
 			vcpu->arch.dr6 |= dr6 | DR6_RTM;
-			if (!(dr6 & ~DR6_RESERVED)) /* icebp */
+			if (is_icebp(intr_info))
 				skip_emulated_instruction(vcpu);
 
 			kvm_queue_exception(vcpu, DB_VECTOR);

[PATCH 3.18 21/93] scsi: sg: dont return bogus Sg_requests

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Thumshirn <jthumshirn@suse.de>

commit 48ae8484e9fc324b4968d33c585e54bc98e44d61 upstream.

If the list search in sg_get_rq_mark() fails to find a valid request, we
return a bogus element. This then can later lead to a GPF in
sg_remove_scat().

So don't return bogus Sg_requests in sg_get_rq_mark() but NULL in case
the list search doesn't find a valid request.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Doug Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Doug Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/sg.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -2121,11 +2121,12 @@ sg_get_rq_mark(Sg_fd * sfp, int pack_id)
 		if ((1 == resp->done) && (!resp->sg_io_owned) &&
 		    ((-1 == pack_id) || (resp->header.pack_id == pack_id))) {
 			resp->done = 2;	/* guard against other readers */
-			break;
+			write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
+			return resp;
 		}
 	}
 	write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
-	return resp;
+	return NULL;
 }
 
 /* always adds to end of list */

[PATCH 3.18 22/93] [PATCH] Revert "genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs"

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

This reverts commit 093c265afffb0a91a7611c3bb74d0883731a807b which is
commit 382bd4de61827dbaaf5fb4fb7b1f4be4a86505e7 upstream.

It causes too many problems with the stable tree, and would require too
many other things to be backported, so just revert it.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/irq/manage.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1058,10 +1058,8 @@ __setup_irq(unsigned int irq, struct irq
 		 * set the trigger type must match. Also all must
 		 * agree on ONESHOT.
 		 */
-		unsigned int oldtype = irqd_get_trigger_type(&desc->irq_data);
-
 		if (!((old->flags & new->flags) & IRQF_SHARED) ||
-		    (oldtype != (new->flags & IRQF_TRIGGER_MASK)) ||
+		    ((old->flags ^ new->flags) & IRQF_TRIGGER_MASK) ||
 		    ((old->flags ^ new->flags) & IRQF_ONESHOT))
 			goto mismatch;
 

[PATCH 3.18 23/93] dccp: check sk for closed state in dccp_sendmsg()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Kodanev <alexey.kodanev@oracle.com>


[ Upstream commit 67f93df79aeefc3add4e4b31a752600f834236e2 ]

dccp_disconnect() sets 'dp->dccps_hc_tx_ccid' tx handler to NULL,
therefore if DCCP socket is disconnected and dccp_sendmsg() is
called after it, it will cause a NULL pointer dereference in
dccp_write_xmit().

This crash and the reproducer was reported by syzbot. Looks like
it is reproduced if commit 69c64866ce07 ("dccp: CVE-2017-8824:
use-after-free in DCCP code") is applied.

Reported-by: syzbot+f99ab3887ab65d70f816@syzkaller.appspotmail.com
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dccp/proto.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -792,6 +792,11 @@ int dccp_sendmsg(struct kiocb *iocb, str
 	if (skb == NULL)
 		goto out_release;
 
+	if (sk->sk_state == DCCP_CLOSED) {
+		rc = -ENOTCONN;
+		goto out_discard;
+	}
+
 	skb_reserve(skb, sk->sk_prot->max_header);
 	rc = memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len);
 	if (rc != 0)

[PATCH 3.18 24/93] ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>


[ Upstream commit 9f62c15f28b0d1d746734666d88a79f08ba1e43e ]

Fix the following slab-out-of-bounds kasan report in
ndisc_fill_redirect_hdr_option when the incoming ipv6 packet is not
linear and the accessed data are not in the linear data region of orig_skb.

[ 1503.122508] ==================================================================
[ 1503.122832] BUG: KASAN: slab-out-of-bounds in ndisc_send_redirect+0x94e/0x990
[ 1503.123036] Read of size 1184 at addr ffff8800298ab6b0 by task netperf/1932

[ 1503.123220] CPU: 0 PID: 1932 Comm: netperf Not tainted 4.16.0-rc2+ #124
[ 1503.123347] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014
[ 1503.123527] Call Trace:
[ 1503.123579]  <IRQ>
[ 1503.123638]  print_address_description+0x6e/0x280
[ 1503.123849]  kasan_report+0x233/0x350
[ 1503.123946]  memcpy+0x1f/0x50
[ 1503.124037]  ndisc_send_redirect+0x94e/0x990
[ 1503.125150]  ip6_forward+0x1242/0x13b0
[...]
[ 1503.153890] Allocated by task 1932:
[ 1503.153982]  kasan_kmalloc+0x9f/0xd0
[ 1503.154074]  __kmalloc_track_caller+0xb5/0x160
[ 1503.154198]  __kmalloc_reserve.isra.41+0x24/0x70
[ 1503.154324]  __alloc_skb+0x130/0x3e0
[ 1503.154415]  sctp_packet_transmit+0x21a/0x1810
[ 1503.154533]  sctp_outq_flush+0xc14/0x1db0
[ 1503.154624]  sctp_do_sm+0x34e/0x2740
[ 1503.154715]  sctp_primitive_SEND+0x57/0x70
[ 1503.154807]  sctp_sendmsg+0xaa6/0x1b10
[ 1503.154897]  sock_sendmsg+0x68/0x80
[ 1503.154987]  ___sys_sendmsg+0x431/0x4b0
[ 1503.155078]  __sys_sendmsg+0xa4/0x130
[ 1503.155168]  do_syscall_64+0x171/0x3f0
[ 1503.155259]  entry_SYSCALL_64_after_hwframe+0x42/0xb7

[ 1503.155436] Freed by task 1932:
[ 1503.155527]  __kasan_slab_free+0x134/0x180
[ 1503.155618]  kfree+0xbc/0x180
[ 1503.155709]  skb_release_data+0x27f/0x2c0
[ 1503.155800]  consume_skb+0x94/0xe0
[ 1503.155889]  sctp_chunk_put+0x1aa/0x1f0
[ 1503.155979]  sctp_inq_pop+0x2f8/0x6e0
[ 1503.156070]  sctp_assoc_bh_rcv+0x6a/0x230
[ 1503.156164]  sctp_inq_push+0x117/0x150
[ 1503.156255]  sctp_backlog_rcv+0xdf/0x4a0
[ 1503.156346]  __release_sock+0x142/0x250
[ 1503.156436]  release_sock+0x80/0x180
[ 1503.156526]  sctp_sendmsg+0xbb0/0x1b10
[ 1503.156617]  sock_sendmsg+0x68/0x80
[ 1503.156708]  ___sys_sendmsg+0x431/0x4b0
[ 1503.156799]  __sys_sendmsg+0xa4/0x130
[ 1503.156889]  do_syscall_64+0x171/0x3f0
[ 1503.156980]  entry_SYSCALL_64_after_hwframe+0x42/0xb7

[ 1503.157158] The buggy address belongs to the object at ffff8800298ab600
                which belongs to the cache kmalloc-1024 of size 1024
[ 1503.157444] The buggy address is located 176 bytes inside of
                1024-byte region [ffff8800298ab600, ffff8800298aba00)
[ 1503.157702] The buggy address belongs to the page:
[ 1503.157820] page:ffffea0000a62a00 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0
[ 1503.158053] flags: 0x4000000000008100(slab|head)
[ 1503.158171] raw: 4000000000008100 0000000000000000 0000000000000000 00000001800e000e
[ 1503.158350] raw: dead000000000100 dead000000000200 ffff880036002600 0000000000000000
[ 1503.158523] page dumped because: kasan: bad access detected

[ 1503.158698] Memory state around the buggy address:
[ 1503.158816]  ffff8800298ab900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1503.158988]  ffff8800298ab980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1503.159165] >ffff8800298aba00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1503.159338]                    ^
[ 1503.159436]  ffff8800298aba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1503.159610]  ffff8800298abb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1503.159785] ==================================================================
[ 1503.159964] Disabling lock debugging due to kernel taint

The test scenario to trigger the issue consists of 4 devices:
- H0: data sender, connected to LAN0
- H1: data receiver, connected to LAN1
- GW0 and GW1: routers between LAN0 and LAN1. Both of them have an
  ethernet connection on LAN0 and LAN1
On H{0,1} set GW0 as default gateway while on GW0 set GW1 as next hop for
data from LAN0 to LAN1.
Moreover create an ip6ip6 tunnel between H0 and H1 and send 3 concurrent
data streams (TCP/UDP/SCTP) from H0 to H1 through ip6ip6 tunnel (send
buffer size is set to 16K). While data streams are active flush the route
cache on HA multiple times.
I have not been able to identify a given commit that introduced the issue
since, using the reproducer described above, the kasan report has been
triggered from 4.14 and I have not gone back further.

Reported-by: Jianlin Shi <jishi@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ndisc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1443,7 +1443,8 @@ static void ndisc_fill_redirect_hdr_opti
 	*(opt++) = (rd_len >> 3);
 	opt += 6;
 
-	memcpy(opt, ipv6_hdr(orig_skb), rd_len - 8);
+	skb_copy_bits(orig_skb, skb_network_offset(orig_skb), opt,
+		      rd_len - 8);
 }
 
 void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target)

[PATCH 3.18 25/93] l2tp: do not accept arbitrary sockets

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>


[ Upstream commit 17cfe79a65f98abe535261856c5aef14f306dff7 ]

syzkaller found an issue caused by lack of sufficient checks
in l2tp_tunnel_create()

RAW sockets can not be considered as UDP ones for instance.

In another patch, we shall replace all pr_err() by less intrusive
pr_debug() so that syzkaller can find other bugs faster.
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Acked-by: James Chapman <jchapman@katalix.com>

==================================================================
BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69
dst_release: dst:00000000d53d0d0f refcnt:-1
Write of size 1 at addr ffff8801d013b798 by task syz-executor3/6242

CPU: 1 PID: 6242 Comm: syz-executor3 Not tainted 4.16.0-rc2+ #253
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x24d lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report+0x23b/0x360 mm/kasan/report.c:412
 __asan_report_store1_noabort+0x17/0x20 mm/kasan/report.c:435
 setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69
 l2tp_tunnel_create+0x1354/0x17f0 net/l2tp/l2tp_core.c:1596
 pppol2tp_connect+0x14b1/0x1dd0 net/l2tp/l2tp_ppp.c:707
 SYSC_connect+0x213/0x4a0 net/socket.c:1640
 SyS_connect+0x24/0x30 net/socket.c:1621
 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/l2tp/l2tp_core.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1517,9 +1517,14 @@ int l2tp_tunnel_create(struct net *net,
 		encap = cfg->encap;
 
 	/* Quick sanity checks */
+	err = -EPROTONOSUPPORT;
+	if (sk->sk_type != SOCK_DGRAM) {
+		pr_debug("tunl %hu: fd %d wrong socket type\n",
+			 tunnel_id, fd);
+		goto err;
+	}
 	switch (encap) {
 	case L2TP_ENCAPTYPE_UDP:
-		err = -EPROTONOSUPPORT;
 		if (sk->sk_protocol != IPPROTO_UDP) {
 			pr_err("tunl %hu: fd %d wrong protocol, got %d, expected %d\n",
 			       tunnel_id, fd, sk->sk_protocol, IPPROTO_UDP);
@@ -1527,7 +1532,6 @@ int l2tp_tunnel_create(struct net *net,
 		}
 		break;
 	case L2TP_ENCAPTYPE_IP:
-		err = -EPROTONOSUPPORT;
 		if (sk->sk_protocol != IPPROTO_L2TP) {
 			pr_err("tunl %hu: fd %d wrong protocol, got %d, expected %d\n",
 			       tunnel_id, fd, sk->sk_protocol, IPPROTO_L2TP);

[PATCH 3.18 26/93] net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>


[ Upstream commit 00777fac28ba3e126b9e63e789a613e8bd2cab25 ]

If the optional regulator is deferred, we must release some resources.
They will be re-allocated when the probe function will be called again.

Fixes: 6eacf31139bf ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/arc/emac_rockchip.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/arc/emac_rockchip.c
+++ b/drivers/net/ethernet/arc/emac_rockchip.c
@@ -150,8 +150,10 @@ static int emac_rockchip_probe(struct pl
 	/* Optional regulator for PHY */
 	priv->regulator = devm_regulator_get_optional(dev, "phy");
 	if (IS_ERR(priv->regulator)) {
-		if (PTR_ERR(priv->regulator) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(priv->regulator) == -EPROBE_DEFER) {
+			err = -EPROBE_DEFER;
+			goto out_clk_disable;
+		}
 		dev_err(dev, "no regulator found\n");
 		priv->regulator = NULL;
 	}

[PATCH 3.18 27/93] net/iucv: Free memory obtained by kzalloc

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arvind Yadav <arvind.yadav.cs@gmail.com>


[ Upstream commit fa6a91e9b907231d2e38ea5ed89c537b3525df3d ]

Free memory by calling put_device(), if afiucv_iucv_init is not
successful.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/iucv/af_iucv.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -2383,9 +2383,11 @@ static int afiucv_iucv_init(void)
 	af_iucv_dev->driver = &af_iucv_driver;
 	err = device_register(af_iucv_dev);
 	if (err)
-		goto out_driver;
+		goto out_iucv_dev;
 	return 0;
 
+out_iucv_dev:
+	put_device(af_iucv_dev);
 out_driver:
 	driver_unregister(&af_iucv_driver);
 out_iucv:

[PATCH 3.18 28/93] netlink: avoid a double skb free in genlmsg_mcast()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>


[ Upstream commit 02a2385f37a7c6594c9d89b64c4a1451276f08eb ]

nlmsg_multicast() consumes always the skb, thus the original skb must be
freed only when this function is called with a clone.

Fixes: cb9f7a9a5c96 ("netlink: ensure to loop over all netns in genlmsg_multicast_allns()")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netlink/genetlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -1083,7 +1083,7 @@ static int genlmsg_mcast(struct sk_buff
 	if (!err)
 		delivered = true;
 	else if (err != -ESRCH)
-		goto error;
+		return err;
 	return delivered ? 0 : -ESRCH;
  error:
 	kfree_skb(skb);

[PATCH 3.18 29/93] net: Only honor ifindex in IP_PKTINFO if non-0

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Ahern <dsahern@gmail.com>


[ Upstream commit 2cbb4ea7de167b02ffa63e9cdfdb07a7e7094615 ]

Only allow ifindex from IP_PKTINFO to override SO_BINDTODEVICE settings
if the index is actually set in the message.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_sockglue.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -206,7 +206,8 @@ int ip_cmsg_send(struct net *net, struct
 			src_info = (struct in6_pktinfo *)CMSG_DATA(cmsg);
 			if (!ipv6_addr_v4mapped(&src_info->ipi6_addr))
 				return -EINVAL;
-			ipc->oif = src_info->ipi6_ifindex;
+			if (src_info->ipi6_ifindex)
+				ipc->oif = src_info->ipi6_ifindex;
 			ipc->addr = src_info->ipi6_addr.s6_addr32[3];
 			continue;
 		}
@@ -227,7 +228,8 @@ int ip_cmsg_send(struct net *net, struct
 			if (cmsg->cmsg_len != CMSG_LEN(sizeof(struct in_pktinfo)))
 				return -EINVAL;
 			info = (struct in_pktinfo *)CMSG_DATA(cmsg);
-			ipc->oif = info->ipi_ifindex;
+			if (info->ipi_ifindex)
+				ipc->oif = info->ipi_ifindex;
 			ipc->addr = info->ipi_spec_dst.s_addr;
 			break;
 		}

[PATCH 3.18 30/93] skbuff: Fix not waking applications when errors are enqueued

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vinicius Costa Gomes <vinicius.gomes@intel.com>


[ Upstream commit 6e5d58fdc9bedd0255a8781b258f10bbdc63e975 ]

When errors are enqueued to the error queue via sock_queue_err_skb()
function, it is possible that the waiting application is not notified.

Calling 'sk->sk_data_ready()' would not notify applications that
selected only POLLERR events in poll() (for example).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Randy E. Witt <randy.e.witt@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/skbuff.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3527,7 +3527,7 @@ int sock_queue_err_skb(struct sock *sk,
 
 	skb_queue_tail(&sk->sk_error_queue, skb);
 	if (!sock_flag(sk, SOCK_DEAD))
-		sk->sk_data_ready(sk);
+		sk->sk_error_report(sk);
 	return 0;
 }
 EXPORT_SYMBOL(sock_queue_err_skb);

[PATCH 3.18 31/93] team: Fix double free in error path

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arkadi Sharshevsky <arkadis@mellanox.com>


[ Upstream commit cbcc607e18422555db569b593608aec26111cb0b ]

The __send_and_alloc_skb() receives a skb ptr as a parameter but in
case it fails the skb is not valid:
- Send failed and released the skb internally.
- Allocation failed.

The current code tries to release the skb in case of failure which
causes redundant freeing.

Fixes: 9b00cf2d1024 ("team: implement multipart netlink messages for options transfers")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/team/team.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -2368,7 +2368,7 @@ send_done:
 	if (!nlh) {
 		err = __send_and_alloc_skb(&skb, team, portid, send_func);
 		if (err)
-			goto errout;
+			return err;
 		goto send_done;
 	}
 
@@ -2648,7 +2648,7 @@ send_done:
 	if (!nlh) {
 		err = __send_and_alloc_skb(&skb, team, portid, send_func);
 		if (err)
-			goto errout;
+			return err;
 		goto send_done;
 	}
 

[PATCH 3.18 32/93] s390/qeth: free netdevice when removing a card

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@linux.vnet.ibm.com>


[ Upstream commit 6be687395b3124f002a653c1a50b3260222b3cd7 ]

On removal, a qeth card's netdevice is currently not properly freed
because the call chain looks as follows:

qeth_core_remove_device(card)
	lx_remove_device(card)
		unregister_netdev(card->dev)
		card->dev = NULL			!!!
	qeth_core_free_card(card)
		if (card->dev)				!!!
			free_netdev(card->dev)

Fix it by free'ing the netdev straight after unregistering. This also
fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()),
where the need to free the current netdevice was not considered at all.

Note that free_netdev() takes care of the netif_napi_del() for us too.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_core_main.c |    2 --
 drivers/s390/net/qeth_l2_main.c   |    2 +-
 drivers/s390/net/qeth_l3_main.c   |    2 +-
 3 files changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -4937,8 +4937,6 @@ static void qeth_core_free_card(struct q
 	QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
 	qeth_clean_channel(&card->read);
 	qeth_clean_channel(&card->write);
-	if (card->dev)
-		free_netdev(card->dev);
 	kfree(card->ip_tbd_list);
 	qeth_free_qdio_buffers(card);
 	unregister_service_level(&card->qeth_service_level);
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -922,8 +922,8 @@ static void qeth_l2_remove_device(struct
 		qeth_l2_set_offline(cgdev);
 
 	if (card->dev) {
-		netif_napi_del(&card->napi);
 		unregister_netdev(card->dev);
+		free_netdev(card->dev);
 		card->dev = NULL;
 	}
 	return;
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -3333,8 +3333,8 @@ static void qeth_l3_remove_device(struct
 		qeth_l3_set_offline(cgdev);
 
 	if (card->dev) {
-		netif_napi_del(&card->napi);
 		unregister_netdev(card->dev);
+		free_netdev(card->dev);
 		card->dev = NULL;
 	}
 

[PATCH 3.18 33/93] s390/qeth: when thread completes, wake up all waiters

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@linux.vnet.ibm.com>


[ Upstream commit 1063e432bb45be209427ed3f1ca3908e4aa3c7d7 ]

qeth_wait_for_threads() is potentially called by multiple users, make
sure to notify all of them after qeth_clear_thread_running_bit()
adjusted the thread_running_mask. With no timeout, callers would
otherwise stall.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_core_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -944,7 +944,7 @@ void qeth_clear_thread_running_bit(struc
 	spin_lock_irqsave(&card->thread_mask_lock, flags);
 	card->thread_running_mask &= ~thread;
 	spin_unlock_irqrestore(&card->thread_mask_lock, flags);
-	wake_up(&card->wait_q);
+	wake_up_all(&card->wait_q);
 }
 EXPORT_SYMBOL_GPL(qeth_clear_thread_running_bit);
 

[PATCH 3.18 34/93] s390/qeth: lock read device while queueing next buffer

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@linux.vnet.ibm.com>


[ Upstream commit 17bf8c9b3d499d5168537c98b61eb7a1fcbca6c2 ]

For calling ccw_device_start(), issue_next_read() needs to hold the
device's ccwlock.
This is satisfied for the IRQ handler path (where qeth_irq() gets called
under the ccwlock), but we need explicit locking for the initial call by
the MPC initialization.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_core_main.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -517,8 +517,7 @@ static inline int qeth_is_cq(struct qeth
 	    queue == card->qdio.no_in_queues - 1;
 }
 
-
-static int qeth_issue_next_read(struct qeth_card *card)
+static int __qeth_issue_next_read(struct qeth_card *card)
 {
 	int rc;
 	struct qeth_cmd_buffer *iob;
@@ -549,6 +548,17 @@ static int qeth_issue_next_read(struct q
 	return rc;
 }
 
+static int qeth_issue_next_read(struct qeth_card *card)
+{
+	int ret;
+
+	spin_lock_irq(get_ccwdev_lock(CARD_RDEV(card)));
+	ret = __qeth_issue_next_read(card);
+	spin_unlock_irq(get_ccwdev_lock(CARD_RDEV(card)));
+
+	return ret;
+}
+
 static struct qeth_reply *qeth_alloc_reply(struct qeth_card *card)
 {
 	struct qeth_reply *reply;
@@ -1166,7 +1176,7 @@ static void qeth_irq(struct ccw_device *
 		return;
 	if (channel == &card->read &&
 	    channel->state == CH_STATE_UP)
-		qeth_issue_next_read(card);
+		__qeth_issue_next_read(card);
 
 	iob = channel->iob;
 	index = channel->buf_no;

[PATCH 3.18 35/93] s390/qeth: on channel error, reject further cmd requests

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@linux.vnet.ibm.com>


[ Upstream commit a6c3d93963e4b333c764fde69802c3ea9eaa9d5c ]

When the IRQ handler determines that one of the cmd IO channels has
failed and schedules recovery, block any further cmd requests from
being submitted. The request would inevitably stall, and prevent the
recovery from making progress until the request times out.

This sort of error was observed after Live Guest Relocation, where
the pending IO on the READ channel intentionally gets terminated to
kick-start recovery. Simultaneously the guest executed SIOCETHTOOL,
triggering qeth to issue a QUERY CARD INFO command. The command
then stalled in the inoperabel WRITE channel.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_core_main.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -1158,6 +1158,7 @@ static void qeth_irq(struct ccw_device *
 		}
 		rc = qeth_get_problem(cdev, irb);
 		if (rc) {
+			card->read_or_write_problem = 1;
 			qeth_clear_ipacmd_list(card);
 			qeth_schedule_recovery(card);
 			goto out;

[PATCH 3.18 36/93] net: fec: Fix unbalanced PM runtime calls

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <f.fainelli@gmail.com>


[ Upstream commit a069215cf5985f3aa1bba550264907d6bd05c5f7 ]

When unbinding/removing the driver, we will run into the following warnings:

[  259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator
[  259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable!
[  259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
[  259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1
[  259.696239] libphy: fec_enet_mii_bus: probed

Avoid these warnings by balancing the runtime PM calls during fec_drv_remove().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/fec_main.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3339,6 +3339,8 @@ fec_drv_remove(struct platform_device *p
 	if (fep->reg_phy)
 		regulator_disable(fep->reg_phy);
 	fec_enet_clk_enable(ndev, false);
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 	of_node_put(fep->phy_node);
 	free_netdev(ndev);
 

[PATCH 3.18 37/93] mtd: jedec_probe: Fix crash in jedec_read_mfr()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Walleij <linus.walleij@linaro.org>

commit 87a73eb5b56fd6e07c8e499fe8608ef2d8912b82 upstream.

It turns out that the loop where we read manufacturer
jedec_read_mfd() can under some circumstances get a
CFI_MFR_CONTINUATION repeatedly, making the loop go
over all banks and eventually hit the end of the
map and crash because of an access violation:

Unable to handle kernel paging request at virtual address c4980000
pgd = (ptrval)
[c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000
Internal error: Oops: 7 [#1] PREEMPT ARM
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150
Hardware name: Gemini (Device Tree)
PC is at jedec_probe_chip+0x6ec/0xcd0
LR is at 0x4
pc : [<c03a2bf4>]    lr : [<00000004>]    psr: 60000013
sp : c382dd18  ip : 0000ffff  fp : 00000000
r10: c0626388  r9 : 00020000  r8 : c0626340
r7 : 00000000  r6 : 00000001  r5 : c3a71afc  r4 : c382dd70
r3 : 00000001  r2 : c4900000  r1 : 00000002  r0 : 00080000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 0000397f  Table: 00004000  DAC: 00000053
Process swapper (pid: 1, stack limit = 0x(ptrval))

Fix this by breaking the loop with a return 0 if
the offset exceeds the map size.

Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0")
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/chips/jedec_probe.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1889,6 +1889,8 @@ static inline u32 jedec_read_mfr(struct
 	do {
 		uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), map, cfi);
 		mask = (1 << (cfi->device_type * 8)) - 1;
+		if (ofs >= map->size)
+			return 0;
 		result = map_read(map, base + ofs);
 		bank++;
 	} while ((result.x[0] & mask) == CFI_MFR_CONTINUATION);

[PATCH 3.18 38/93] ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Roese <sr@denx.de>

commit 9066ae7ff5d89c0b5daa271e2d573540097a94fa upstream.

When trying to use the driver (e.g. aplay *.wav), the 4MiB DMA buffer
will get mmapp'ed in 16KiB chunks. But this fails with the 2nd 16KiB
area, as the page offset is outside of the VMA range (size), which is
currently used as size parameter in snd_pcm_lib_default_mmap(). By
using the DMA buffer size (dma_bytes) instead, the complete DMA buffer
can be mmapp'ed and the issue is fixed.

This issue was detected on an ARM platform (TI AM57xx) using the RME
HDSP MADI PCIe soundcard.

Fixes: 657b1989dacf ("ALSA: pcm - Use dma_mmap_coherent() if available")
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/pcm_native.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -3394,7 +3394,7 @@ int snd_pcm_lib_default_mmap(struct snd_
 					 area,
 					 substream->runtime->dma_area,
 					 substream->runtime->dma_addr,
-					 area->vm_end - area->vm_start);
+					 substream->runtime->dma_bytes);
 #elif defined(CONFIG_MIPS) && defined(CONFIG_DMA_NONCOHERENT)
 	if (substream->dma_buffer.dev.type == SNDRV_DMA_TYPE_DEV &&
 	    !plat_device_is_coherent(substream->dma_buffer.dev.dev))

[PATCH 3.18 39/93] ALSA: pcm: potential uninitialized return values

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 5607dddbfca774fb38bffadcb077fe03aa4ac5c6 upstream.

Smatch complains that "tmp" can be uninitialized if we do a zero size
write.

Fixes: 02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/oss/pcm_oss.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -1362,7 +1362,7 @@ static ssize_t snd_pcm_oss_write2(struct
 static ssize_t snd_pcm_oss_write1(struct snd_pcm_substream *substream, const char __user *buf, size_t bytes)
 {
 	size_t xfer = 0;
-	ssize_t tmp;
+	ssize_t tmp = 0;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 
 	if (atomic_read(&substream->mmap_count))
@@ -1469,7 +1469,7 @@ static ssize_t snd_pcm_oss_read2(struct
 static ssize_t snd_pcm_oss_read1(struct snd_pcm_substream *substream, char __user *buf, size_t bytes)
 {
 	size_t xfer = 0;
-	ssize_t tmp;
+	ssize_t tmp = 0;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 
 	if (atomic_read(&substream->mmap_count))

[PATCH 3.18 40/93] perf/hwbp: Simplify the perf-hwbp code, fix documentation

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit f67b15037a7a50c57f72e69a6d59941ad90a0f0f upstream.

Annoyingly, modify_user_hw_breakpoint() unnecessarily complicates the
modification of a breakpoint - simplify it and remove the pointless
local variables.

Also update the stale Docbook while at it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/hw_breakpoint.c |   30 +++++++-----------------------
 1 file changed, 7 insertions(+), 23 deletions(-)

--- a/kernel/events/hw_breakpoint.c
+++ b/kernel/events/hw_breakpoint.c
@@ -427,16 +427,9 @@ EXPORT_SYMBOL_GPL(register_user_hw_break
  * modify_user_hw_breakpoint - modify a user-space hardware breakpoint
  * @bp: the breakpoint structure to modify
  * @attr: new breakpoint attributes
- * @triggered: callback to trigger when we hit the breakpoint
- * @tsk: pointer to 'task_struct' of the process to which the address belongs
  */
 int modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr)
 {
-	u64 old_addr = bp->attr.bp_addr;
-	u64 old_len = bp->attr.bp_len;
-	int old_type = bp->attr.bp_type;
-	int err = 0;
-
 	/*
 	 * modify_user_hw_breakpoint can be invoked with IRQs disabled and hence it
 	 * will not be possible to raise IPIs that invoke __perf_event_disable.
@@ -451,27 +444,18 @@ int modify_user_hw_breakpoint(struct per
 	bp->attr.bp_addr = attr->bp_addr;
 	bp->attr.bp_type = attr->bp_type;
 	bp->attr.bp_len = attr->bp_len;
+	bp->attr.disabled = 1;
 
-	if (attr->disabled)
-		goto end;
-
-	err = validate_hw_breakpoint(bp);
-	if (!err)
-		perf_event_enable(bp);
+	if (!attr->disabled) {
+		int err = validate_hw_breakpoint(bp);
 
-	if (err) {
-		bp->attr.bp_addr = old_addr;
-		bp->attr.bp_type = old_type;
-		bp->attr.bp_len = old_len;
-		if (!bp->attr.disabled)
-			perf_event_enable(bp);
+		if (err)
+			return err;
 
-		return err;
+		perf_event_enable(bp);
+		bp->attr.disabled = 0;
 	}
 
-end:
-	bp->attr.disabled = attr->disabled;
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(modify_user_hw_breakpoint);

[PATCH 3.18 41/93] partitions/msdos: Unable to mount UFS 44bsd partitions

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Narron <comet.berkeley@gmail.com>

commit 5f15684bd5e5ef39d4337988864fec8012471dda upstream.

UFS partitions from newer versions of FreeBSD 10 and 11 use relative
addressing for their subpartitions. But older versions of FreeBSD still
use absolute addressing just like OpenBSD and NetBSD.

Instead of simply testing for a FreeBSD partition, the code needs to
also test if the starting offset of the C subpartition is zero.

https://bugzilla.kernel.org/show_bug.cgi?id=197733

Signed-off-by: Richard Narron <comet.berkeley@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/partitions/msdos.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/block/partitions/msdos.c
+++ b/block/partitions/msdos.c
@@ -300,7 +300,9 @@ static void parse_bsd(struct parsed_part
 			continue;
 		bsd_start = le32_to_cpu(p->p_offset);
 		bsd_size = le32_to_cpu(p->p_size);
-		if (memcmp(flavour, "bsd\0", 4) == 0)
+		/* FreeBSD has relative offset if C partition offset is zero */
+		if (memcmp(flavour, "bsd\0", 4) == 0 &&
+		    le32_to_cpu(l->d_partitions[2].p_offset) == 0)
 			bsd_start += offset;
 		if (offset == bsd_start && size == bsd_size)
 			/* full parent partition, we have it already */

[PATCH 3.18 42/93] usb: gadget: define free_ep_req as universal function

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe F. Tonello <eu@felipetonello.com>

commit 079fe5a6da616891cca1a26e803e1df2a87e9ae5 upstream.

This function is shared between gadget functions, so this avoid unnecessary
duplicated code and potentially avoid memory leaks.

Reviewed-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_midi.c       |    6 ------
 drivers/usb/gadget/function/f_sourcesink.c |    6 ------
 drivers/usb/gadget/function/g_zero.h       |    1 -
 drivers/usb/gadget/u_f.c                   |    1 -
 drivers/usb/gadget/u_f.h                   |   10 ++++++++--
 5 files changed, 8 insertions(+), 16 deletions(-)

--- a/drivers/usb/gadget/function/f_midi.c
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -199,12 +199,6 @@ static inline struct usb_request *midi_a
 	return alloc_ep_req(ep, length, length);
 }
 
-static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
-{
-	kfree(req->buf);
-	usb_ep_free_request(ep, req);
-}
-
 static const uint8_t f_midi_cin_length[] = {
 	0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
 };
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -435,12 +435,6 @@ static inline struct usb_request *ss_all
 	return alloc_ep_req(ep, len, buflen);
 }
 
-void free_ep_req(struct usb_ep *ep, struct usb_request *req)
-{
-	kfree(req->buf);
-	usb_ep_free_request(ep, req);
-}
-
 static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep)
 {
 	int			value;
--- a/drivers/usb/gadget/function/g_zero.h
+++ b/drivers/usb/gadget/function/g_zero.h
@@ -69,7 +69,6 @@ void lb_modexit(void);
 int lb_modinit(void);
 
 /* common utilities */
-void free_ep_req(struct usb_ep *ep, struct usb_request *req);
 void disable_endpoints(struct usb_composite_dev *cdev,
 		struct usb_ep *in, struct usb_ep *out,
 		struct usb_ep *iso_in, struct usb_ep *iso_out,
--- a/drivers/usb/gadget/u_f.c
+++ b/drivers/usb/gadget/u_f.c
@@ -11,7 +11,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/usb/gadget.h>
 #include "u_f.h"
 
 struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len)
--- a/drivers/usb/gadget/u_f.h
+++ b/drivers/usb/gadget/u_f.h
@@ -16,6 +16,8 @@
 #ifndef __U_F_H__
 #define __U_F_H__
 
+#include <linux/usb/gadget.h>
+
 /* Variable Length Array Macros **********************************************/
 #define vla_group(groupname) size_t groupname##__next = 0
 #define vla_group_size(groupname) groupname##__next
@@ -45,8 +47,12 @@
 struct usb_ep;
 struct usb_request;
 
+/* Requests allocated via alloc_ep_req() must be freed by free_ep_req(). */
 struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len);
+static inline void free_ep_req(struct usb_ep *ep, struct usb_request *req)
+{
+	kfree(req->buf);
+	usb_ep_free_request(ep, req);
+}
 
 #endif /* __U_F_H__ */
-
-

[PATCH 3.18 43/93] usb: gadget: change len to size_t on alloc_ep_req()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe F. Tonello <eu@felipetonello.com>

commit 69bb99738b5c6d56d2b1a75db9cbb4d187453c1a upstream.

Length of buffers should be of type size_t whenever possible. Altough
recommended, this change has no real practical change, unless a driver has a
uses a huge or negative buffer size - it might help find these bugs.

Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/u_f.c |    2 +-
 drivers/usb/gadget/u_f.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/u_f.c
+++ b/drivers/usb/gadget/u_f.c
@@ -13,7 +13,7 @@
 
 #include "u_f.h"
 
-struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len)
+struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len, int default_len)
 {
 	struct usb_request      *req;
 
--- a/drivers/usb/gadget/u_f.h
+++ b/drivers/usb/gadget/u_f.h
@@ -48,7 +48,7 @@ struct usb_ep;
 struct usb_request;
 
 /* Requests allocated via alloc_ep_req() must be freed by free_ep_req(). */
-struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len);
+struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len, int default_len);
 static inline void free_ep_req(struct usb_ep *ep, struct usb_request *req)
 {
 	kfree(req->buf);

[PATCH 3.18 44/93] usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe F. Tonello <eu@felipetonello.com>

commit 16b114a6d7973cf027e4c2b23eae1076eaf98c25 upstream.

USB spec specifies wMaxPacketSize to be little endian (as other properties),
so when using this variable in the driver we should convert to the current
CPU endianness if necessary.

This patch also introduces usb_ep_align() which does always returns the
aligned buffer size for an endpoint. This is useful to be used by USB requests
allocator functions.

Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/usb/gadget.h |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -582,8 +582,20 @@ static inline struct usb_gadget *dev_to_
 
 
 /**
+ * usb_ep_align - returns @len aligned to ep's maxpacketsize.
+ * @ep: the endpoint whose maxpacketsize is used to align @len
+ * @len: buffer size's length to align to @ep's maxpacketsize
+ *
+ * This helper is used to align buffer's size to an ep's maxpacketsize.
+ */
+static inline size_t usb_ep_align(struct usb_ep *ep, size_t len)
+{
+	return round_up(len, (size_t)le16_to_cpu(ep->desc->wMaxPacketSize));
+}
+
+/**
  * usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget
- *	requires quirk_ep_out_aligned_size, otherwise reguens len.
+ *	requires quirk_ep_out_aligned_size, otherwise returns len.
  * @g: controller to check for quirk
  * @ep: the endpoint whose maxpacketsize is used to align @len
  * @len: buffer size's length to align to @ep's maxpacketsize
@@ -594,8 +606,7 @@ static inline struct usb_gadget *dev_to_
 static inline size_t
 usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len)
 {
-	return !g->quirk_ep_out_aligned_size ? len :
-			round_up(len, (size_t)ep->desc->wMaxPacketSize);
+	return g->quirk_ep_out_aligned_size ? usb_ep_align(ep, len) : len;
 }
 
 /**

[PATCH 3.18 45/93] usb: gadget: align buffer size when allocating for OUT endpoint

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe F. Tonello <eu@felipetonello.com>

commit e0466156ee2e944fb47a3fa00932c3698a6d2c67 upstream.

Using usb_ep_align() makes sure that the buffer size for OUT endpoints is
always aligned with wMaxPacketSize (512 usually). This makes sure
that no buffer has the wrong size, which can cause nasty bugs.

Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/u_f.c |    3 +++
 drivers/usb/gadget/u_f.h |   16 +++++++++++++++-
 2 files changed, 18 insertions(+), 1 deletion(-)

--- a/drivers/usb/gadget/u_f.c
+++ b/drivers/usb/gadget/u_f.c
@@ -12,6 +12,7 @@
  */
 
 #include "u_f.h"
+#include <linux/usb/ch9.h>
 
 struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len, int default_len)
 {
@@ -20,6 +21,8 @@ struct usb_request *alloc_ep_req(struct
 	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
 	if (req) {
 		req->length = len ?: default_len;
+		if (usb_endpoint_dir_out(ep->desc))
+			req->length = usb_ep_align(ep, req->length);
 		req->buf = kmalloc(req->length, GFP_ATOMIC);
 		if (!req->buf) {
 			usb_ep_free_request(ep, req);
--- a/drivers/usb/gadget/u_f.h
+++ b/drivers/usb/gadget/u_f.h
@@ -47,8 +47,22 @@
 struct usb_ep;
 struct usb_request;
 
-/* Requests allocated via alloc_ep_req() must be freed by free_ep_req(). */
+/**
+ * alloc_ep_req - returns a usb_request allocated by the gadget driver and
+ * allocates the request's buffer.
+ *
+ * @ep: the endpoint to allocate a usb_request
+ * @len: usb_requests's buffer suggested size
+ * @default_len: used if @len is not provided, ie, is 0
+ *
+ * In case @ep direction is OUT, the @len will be aligned to ep's
+ * wMaxPacketSize. In order to avoid memory leaks or drops, *always* use
+ * usb_requests's length (req->length) to refer to the allocated buffer size.
+ * Requests allocated via alloc_ep_req() *must* be freed by free_ep_req().
+ */
 struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len, int default_len);
+
+/* Frees a usb_request previously allocated by alloc_ep_req() */
 static inline void free_ep_req(struct usb_ep *ep, struct usb_request *req)
 {
 	kfree(req->buf);

[PATCH 3.18 46/93] usb: gadget: f_hid: fix: Prevent accessing released memory

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Opasiak <kopasiak90@gmail.com>

commit aa65d11aa008f4de58a9cee7e121666d9d68505e upstream.

When we unlock our spinlock to copy data to user we may get
disabled by USB host and free the whole list of completed out
requests including the one from which we are copying the data
to user memory.

To prevent from this let's remove our working element from
the list and place it back only if there is sth left when we
finish with it.

Fixes: 99c515005857 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT")
Cc: stable@vger.kernel.org
Tested-by: David Lechner <david@lechnology.com>
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Jerry Zhang <zhangjerry@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_hid.c |   24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -197,6 +197,13 @@ static ssize_t f_hidg_read(struct file *
 	/* pick the first one */
 	list = list_first_entry(&hidg->completed_out_req,
 				struct f_hidg_req_list, list);
+
+	/*
+	 * Remove this from list to protect it from beign free()
+	 * while host disables our function
+	 */
+	list_del(&list->list);
+
 	req = list->req;
 	count = min_t(unsigned int, count, req->actual - list->pos);
 	spin_unlock_irqrestore(&hidg->spinlock, flags);
@@ -212,15 +219,20 @@ static ssize_t f_hidg_read(struct file *
 	 * call, taking into account its current read position.
 	 */
 	if (list->pos == req->actual) {
-		spin_lock_irqsave(&hidg->spinlock, flags);
-		list_del(&list->list);
 		kfree(list);
-		spin_unlock_irqrestore(&hidg->spinlock, flags);
 
 		req->length = hidg->report_length;
 		ret = usb_ep_queue(hidg->out_ep, req, GFP_KERNEL);
-		if (ret < 0)
+		if (ret < 0) {
+			free_ep_req(hidg->out_ep, req);
 			return ret;
+		}
+	} else {
+		spin_lock_irqsave(&hidg->spinlock, flags);
+		list_add(&list->list, &hidg->completed_out_req);
+		spin_unlock_irqrestore(&hidg->spinlock, flags);
+
+		wake_up(&hidg->read_queue);
 	}
 
 	return count;
@@ -455,6 +467,7 @@ static void hidg_disable(struct usb_func
 {
 	struct f_hidg *hidg = func_to_hidg(f);
 	struct f_hidg_req_list *list, *next;
+	unsigned long flags;
 
 	usb_ep_disable(hidg->in_ep);
 	hidg->in_ep->driver_data = NULL;
@@ -462,10 +475,13 @@ static void hidg_disable(struct usb_func
 	usb_ep_disable(hidg->out_ep);
 	hidg->out_ep->driver_data = NULL;
 
+	spin_lock_irqsave(&hidg->spinlock, flags);
 	list_for_each_entry_safe(list, next, &hidg->completed_out_req, list) {
+		free_ep_req(hidg->out_ep, list->req);
 		list_del(&list->list);
 		kfree(list);
 	}
+	spin_unlock_irqrestore(&hidg->spinlock, flags);
 }
 
 static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)

[PATCH 3.18 47/93] Revert "led: core: Fix brightness setting when setting delay_off=0"

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben.hutchings@codethink.co.uk>

This reverts commit 20f6d9c2af33da892a0e03ffd6249c7ab81edfb7, which
was commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c upstream.
The bug that it should fix was only introduced in Linux 4.7, and
in 4.4 it causes a regression.

Reported-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Wang Han <wanghan1995315@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/leds/led-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -76,7 +76,7 @@ void led_blink_set(struct led_classdev *
 		   unsigned long *delay_on,
 		   unsigned long *delay_off)
 {
-	led_stop_software_blink(led_cdev);
+	del_timer_sync(&led_cdev->blink_timer);
 
 	led_cdev->flags &= ~LED_BLINK_ONESHOT;
 	led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;

[PATCH 3.18 48/93] xhci: Fix ring leak in failure path of xhci_alloc_virt_device()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben.hutchings@codethink.co.uk>

This is a stable-only fix for the backport of commit 5d9b70f7d52e
("xhci: Don't add a virt_dev to the devs array before it's fully
allocated").

In branches that predate commit c5628a2af83a ("xhci: remove endpoint
ring cache") there is an additional failure path in
xhci_alloc_virt_device() where ring cache allocation fails, in
which case we need to free the ring allocated for endpoint 0.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Wang Han <wanghan1995315@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-mem.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1032,7 +1032,8 @@ int xhci_alloc_virt_device(struct xhci_h
 
 	return 1;
 fail:
-
+	if (dev->eps[0].ring)
+		xhci_ring_free(xhci, dev->eps[0].ring);
 	if (dev->in_ctx)
 		xhci_free_container_ctx(xhci, dev->in_ctx);
 	if (dev->out_ctx)

[PATCH 3.18 49/93] kprobes/x86: Fix to set RWX bits correctly before releasing trampoline

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

commit c93f5cf571e7795f97d49ef51b766cf25e328545 upstream.

Fix kprobes to set(recover) RWX bits correctly on trampoline
buffer before releasing it. Releasing readonly page to
module_memfree() crash the kernel.

Without this fix, if kprobes user register a bunch of kprobes
in function body (since kprobes on function entry usually
use ftrace) and unregister it, kernel hits a BUG and crash.

Link: http://lkml.kernel.org/r/149570868652.3518.14120169373590420503.stgit@devbox

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: d0381c81c2f7 ("kprobes/x86: Set kprobes pages read-only")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/kprobes/core.c |    9 +++++++++
 kernel/kprobes.c               |    2 +-
 2 files changed, 10 insertions(+), 1 deletion(-)

--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -49,6 +49,7 @@
 #include <linux/kdebug.h>
 #include <linux/kallsyms.h>
 #include <linux/ftrace.h>
+#include <linux/moduleloader.h>
 
 #include <asm/cacheflush.h>
 #include <asm/desc.h>
@@ -374,6 +375,14 @@ int __copy_instruction(u8 *dest, u8 *src
 	return length;
 }
 
+/* Recover page to RW mode before releasing it */
+void free_insn_page(void *page)
+{
+	set_memory_nx((unsigned long)page & PAGE_MASK, 1);
+	set_memory_rw((unsigned long)page & PAGE_MASK, 1);
+	vfree(page);
+}
+
 static int arch_copy_kprobe(struct kprobe *p)
 {
 	int ret;
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -125,7 +125,7 @@ static void *alloc_insn_page(void)
 	return module_alloc(PAGE_SIZE);
 }
 
-static void free_insn_page(void *page)
+void __weak free_insn_page(void *page)
 {
 	module_free(NULL, page);
 }

[PATCH 3.18 50/93] xfrm_user: uncoditionally validate esn replay attribute struct

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

commit d97ca5d714a5334aecadadf696875da40f1fbf3e upstream.

The sanity test added in ecd7918745234 can be bypassed, validation
only occurs if XFRM_STATE_ESN flag is set, but rest of code doesn't care
and just checks if the attribute itself is present.

So always validate.  Alternative is to reject if we have the attribute
without the flag but that would change abi.

Reported-by: syzbot+0ab777c27d2bb7588f73@syzkaller.appspotmail.com
Cc: Mathias Krause <minipli@googlemail.com>
Fixes: ecd7918745234 ("xfrm_user: ensure user supplied esn replay window is valid")
Fixes: d8647b79c3b7e ("xfrm: Add user interface for esn and big anti-replay windows")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xfrm/xfrm_user.c |   21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -120,22 +120,17 @@ static inline int verify_replay(struct x
 	struct nlattr *rt = attrs[XFRMA_REPLAY_ESN_VAL];
 	struct xfrm_replay_state_esn *rs;
 
-	if (p->flags & XFRM_STATE_ESN) {
-		if (!rt)
-			return -EINVAL;
-
-		rs = nla_data(rt);
+	if (!rt)
+		return (p->flags & XFRM_STATE_ESN) ? -EINVAL : 0;
 
-		if (rs->bmp_len > XFRMA_REPLAY_ESN_MAX / sizeof(rs->bmp[0]) / 8)
-			return -EINVAL;
+	rs = nla_data(rt);
 
-		if (nla_len(rt) < xfrm_replay_state_esn_len(rs) &&
-		    nla_len(rt) != sizeof(*rs))
-			return -EINVAL;
-	}
+	if (rs->bmp_len > XFRMA_REPLAY_ESN_MAX / sizeof(rs->bmp[0]) / 8)
+		return -EINVAL;
 
-	if (!rt)
-		return 0;
+	if (nla_len(rt) < xfrm_replay_state_esn_len(rs) &&
+	    nla_len(rt) != sizeof(*rs))
+		return -EINVAL;
 
 	/* As only ESP and AH support ESN feature. */
 	if ((p->id.proto != IPPROTO_ESP) && (p->id.proto != IPPROTO_AH))

[PATCH 3.18 51/93] net: xfrm: use preempt-safe this_cpu_read() in ipcomp_alloc_tfms()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Hackmann <ghackmann@google.com>

commit 0dcd7876029b58770f769cbb7b484e88e4a305e5 upstream.

f7c83bcbfaf5 ("net: xfrm: use __this_cpu_read per-cpu helper") added a
__this_cpu_read() call inside ipcomp_alloc_tfms().

At the time, __this_cpu_read() required the caller to either not care
about races or to handle preemption/interrupt issues.  3.15 tightened
the rules around some per-cpu operations, and now __this_cpu_read()
should never be used in a preemptible context.  On 3.15 and later, we
need to use this_cpu_read() instead.

syzkaller reported this leading to the following kernel BUG while
fuzzing sendmsg:

BUG: using __this_cpu_read() in preemptible [00000000] code: repro/3101
caller is ipcomp_init_state+0x185/0x990
CPU: 3 PID: 3101 Comm: repro Not tainted 4.16.0-rc4-00123-g86f84779d8e9 #154
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
 dump_stack+0xb9/0x115
 check_preemption_disabled+0x1cb/0x1f0
 ipcomp_init_state+0x185/0x990
 ? __xfrm_init_state+0x876/0xc20
 ? lock_downgrade+0x5e0/0x5e0
 ipcomp4_init_state+0xaa/0x7c0
 __xfrm_init_state+0x3eb/0xc20
 xfrm_init_state+0x19/0x60
 pfkey_add+0x20df/0x36f0
 ? pfkey_broadcast+0x3dd/0x600
 ? pfkey_sock_destruct+0x340/0x340
 ? pfkey_seq_stop+0x80/0x80
 ? __skb_clone+0x236/0x750
 ? kmem_cache_alloc+0x1f6/0x260
 ? pfkey_sock_destruct+0x340/0x340
 ? pfkey_process+0x62a/0x6f0
 pfkey_process+0x62a/0x6f0
 ? pfkey_send_new_mapping+0x11c0/0x11c0
 ? mutex_lock_io_nested+0x1390/0x1390
 pfkey_sendmsg+0x383/0x750
 ? dump_sp+0x430/0x430
 sock_sendmsg+0xc0/0x100
 ___sys_sendmsg+0x6c8/0x8b0
 ? copy_msghdr_from_user+0x3b0/0x3b0
 ? pagevec_lru_move_fn+0x144/0x1f0
 ? find_held_lock+0x32/0x1c0
 ? do_huge_pmd_anonymous_page+0xc43/0x11e0
 ? lock_downgrade+0x5e0/0x5e0
 ? get_kernel_page+0xb0/0xb0
 ? _raw_spin_unlock+0x29/0x40
 ? do_huge_pmd_anonymous_page+0x400/0x11e0
 ? __handle_mm_fault+0x553/0x2460
 ? __fget_light+0x163/0x1f0
 ? __sys_sendmsg+0xc7/0x170
 __sys_sendmsg+0xc7/0x170
 ? SyS_shutdown+0x1a0/0x1a0
 ? __do_page_fault+0x5a0/0xca0
 ? lock_downgrade+0x5e0/0x5e0
 SyS_sendmsg+0x27/0x40
 ? __sys_sendmsg+0x170/0x170
 do_syscall_64+0x19f/0x640
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f0ee73dfb79
RSP: 002b:00007ffe14fc15a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0ee73dfb79
RDX: 0000000000000000 RSI: 00000000208befc8 RDI: 0000000000000004
RBP: 00007ffe14fc15b0 R08: 00007ffe14fc15c0 R09: 00007ffe14fc15c0
R10: 0000000000000000 R11: 0000000000000207 R12: 0000000000400440
R13: 00007ffe14fc16b0 R14: 0000000000000000 R15: 0000000000000000

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xfrm/xfrm_ipcomp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/xfrm/xfrm_ipcomp.c
+++ b/net/xfrm/xfrm_ipcomp.c
@@ -283,7 +283,7 @@ static struct crypto_comp * __percpu *ip
 		struct crypto_comp *tfm;
 
 		/* This can be any valid CPU ID so we don't need locking. */
-		tfm = __this_cpu_read(*pos->tfms);
+		tfm = this_cpu_read(*pos->tfms);
 
 		if (!strcmp(crypto_comp_name(tfm), alg_name)) {
 			pos->users++;

[PATCH 3.18 52/93] xfrm: Refuse to insert 32 bit userspace socket policies on 64 bit systems

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steffen Klassert <steffen.klassert@secunet.com>

commit 19d7df69fdb2636856dc8919de72fc1bf8f79598 upstream.

We don't have a compat layer for xfrm, so userspace and kernel
structures have different sizes in this case. This results in
a broken configuration, so refuse to configure socket policies
when trying to insert from 32 bit userspace as we do it already
with policies inserted via netlink.

Reported-and-tested-by: syzbot+e1a1577ca8bcb47b769a@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
[use is_compat_task() - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xfrm/xfrm_state.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1845,6 +1845,11 @@ int xfrm_user_policy(struct sock *sk, in
 	struct xfrm_mgr *km;
 	struct xfrm_policy *pol = NULL;
 
+#ifdef CONFIG_COMPAT
+	if (is_compat_task())
+		return -EOPNOTSUPP;
+#endif
+
 	if (!optval && !optlen) {
 		xfrm_sk_policy_insert(sk, XFRM_POLICY_IN, NULL);
 		xfrm_sk_policy_insert(sk, XFRM_POLICY_OUT, NULL);

[PATCH 3.18 53/93] netfilter: bridge: ebt_among: add more missing match size checks

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

commit c8d70a700a5b486bfa8e5a7d33d805389f6e59f9 upstream.

ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.

commit c4585a2823edf ("bridge: ebt_among: add missing match size checks")
added validation for pool size, but missed fact that the macros
ebt_among_wh_src/dst can already return out-of-bound result because
they do not check value of wh_src/dst_ofs (an offset) vs. the size
of the match that userspace gave to us.

v2:
check that offset has correct alignment.
Paolo Abeni points out that we should also check that src/dst
wormhash arrays do not overlap, and src + length lines up with
start of dst (or vice versa).
v3: compact wormhash_sizes_valid() part

NB: Fixes tag is intentionally wrong, this bug exists from day
one when match was added for 2.6 kernel. Tag is there so stable
maintainers will notice this one too.

Tested with same rules from the earlier patch.

Fixes: c4585a2823edf ("bridge: ebt_among: add missing match size checks")
Reported-by: <syzbot+bdabab6f1983a03fc009@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bridge/netfilter/ebt_among.c |   34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

--- a/net/bridge/netfilter/ebt_among.c
+++ b/net/bridge/netfilter/ebt_among.c
@@ -177,6 +177,28 @@ static bool poolsize_invalid(const struc
 	return w && w->poolsize >= (INT_MAX / sizeof(struct ebt_mac_wormhash_tuple));
 }
 
+static bool wormhash_offset_invalid(int off, unsigned int len)
+{
+	if (off == 0) /* not present */
+		return false;
+
+	if (off < (int)sizeof(struct ebt_among_info) ||
+	    off % __alignof__(struct ebt_mac_wormhash))
+		return true;
+
+	off += sizeof(struct ebt_mac_wormhash);
+
+	return off > len;
+}
+
+static bool wormhash_sizes_valid(const struct ebt_mac_wormhash *wh, int a, int b)
+{
+	if (a == 0)
+		a = sizeof(struct ebt_among_info);
+
+	return ebt_mac_wormhash_size(wh) + a == b;
+}
+
 static int ebt_among_mt_check(const struct xt_mtchk_param *par)
 {
 	const struct ebt_among_info *info = par->matchinfo;
@@ -189,6 +211,10 @@ static int ebt_among_mt_check(const stru
 	if (expected_length > em->match_size)
 		return -EINVAL;
 
+	if (wormhash_offset_invalid(info->wh_dst_ofs, em->match_size) ||
+	    wormhash_offset_invalid(info->wh_src_ofs, em->match_size))
+		return -EINVAL;
+
 	wh_dst = ebt_among_wh_dst(info);
 	if (poolsize_invalid(wh_dst))
 		return -EINVAL;
@@ -201,6 +227,14 @@ static int ebt_among_mt_check(const stru
 	if (poolsize_invalid(wh_src))
 		return -EINVAL;
 
+	if (info->wh_src_ofs < info->wh_dst_ofs) {
+		if (!wormhash_sizes_valid(wh_src, info->wh_src_ofs, info->wh_dst_ofs))
+			return -EINVAL;
+	} else {
+		if (!wormhash_sizes_valid(wh_dst, info->wh_dst_ofs, info->wh_src_ofs))
+			return -EINVAL;
+	}
+
 	expected_length += ebt_mac_wormhash_size(wh_src);
 
 	if (em->match_size != EBT_ALIGN(expected_length)) {

[PATCH 3.18 54/93] netfilter: x_tables: add and use xt_check_proc_name

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

commit b1d0a5d0cba4597c0394997b2d5fced3e3841b4e upstream.

recent and hashlimit both create /proc files, but only check that
name is 0 terminated.

This can trigger WARN() from procfs when name is "" or "/".
Add helper for this and then use it for both.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: <syzbot+0502b00edac2a0680b61@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/netfilter/x_tables.h |    2 ++
 net/netfilter/x_tables.c           |   30 ++++++++++++++++++++++++++++++
 net/netfilter/xt_hashlimit.c       |    5 +++--
 net/netfilter/xt_recent.c          |    6 +++---
 4 files changed, 38 insertions(+), 5 deletions(-)

--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -247,6 +247,8 @@ unsigned int *xt_alloc_entry_offsets(uns
 bool xt_find_jump_offset(const unsigned int *offsets,
 			 unsigned int target, unsigned int size);
 
+int xt_check_proc_name(const char *name, unsigned int size);
+
 int xt_check_match(struct xt_mtchk_param *, unsigned int size, u_int8_t proto,
 		   bool inv_proto);
 int xt_check_target(struct xt_tgchk_param *, unsigned int size, u_int8_t proto,
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -367,6 +367,36 @@ textify_hooks(char *buf, size_t size, un
 	return buf;
 }
 
+/**
+ * xt_check_proc_name - check that name is suitable for /proc file creation
+ *
+ * @name: file name candidate
+ * @size: length of buffer
+ *
+ * some x_tables modules wish to create a file in /proc.
+ * This function makes sure that the name is suitable for this
+ * purpose, it checks that name is NUL terminated and isn't a 'special'
+ * name, like "..".
+ *
+ * returns negative number on error or 0 if name is useable.
+ */
+int xt_check_proc_name(const char *name, unsigned int size)
+{
+	if (name[0] == '\0')
+		return -EINVAL;
+
+	if (strnlen(name, size) == size)
+		return -ENAMETOOLONG;
+
+	if (strcmp(name, ".") == 0 ||
+	    strcmp(name, "..") == 0 ||
+	    strchr(name, '/'))
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(xt_check_proc_name);
+
 int xt_check_match(struct xt_mtchk_param *par,
 		   unsigned int size, u_int8_t proto, bool inv_proto)
 {
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -668,8 +668,9 @@ static int hashlimit_mt_check(const stru
 
 	if (info->cfg.gc_interval == 0 || info->cfg.expire == 0)
 		return -EINVAL;
-	if (info->name[sizeof(info->name)-1] != '\0')
-		return -EINVAL;
+	ret = xt_check_proc_name(info->name, sizeof(info->name));
+	if (ret)
+		return ret;
 	if (par->family == NFPROTO_IPV4) {
 		if (info->cfg.srcmask > 32 || info->cfg.dstmask > 32)
 			return -EINVAL;
--- a/net/netfilter/xt_recent.c
+++ b/net/netfilter/xt_recent.c
@@ -355,9 +355,9 @@ static int recent_mt_check(const struct
 			info->hit_count, ip_pkt_list_tot);
 		return -EINVAL;
 	}
-	if (info->name[0] == '\0' ||
-	    strnlen(info->name, XT_RECENT_NAME_LEN) == XT_RECENT_NAME_LEN)
-		return -EINVAL;
+	ret = xt_check_proc_name(info->name, sizeof(info->name));
+	if (ret)
+		return ret;
 
 	mutex_lock(&recent_mutex);
 	t = recent_table_lookup(recent_net, info->name);

[PATCH 3.18 55/93] Bluetooth: Fix missing encryption refresh on Security Request

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Szymon Janc <szymon.janc@codecoup.pl>

commit 64e759f58f128730b97a3c3a26d283c075ad7c86 upstream.

If Security Request is received on connection that is already encrypted
with sufficient security master should perform encryption key refresh
procedure instead of just ignoring Slave Security Request
(Core Spec 5.0 Vol 3 Part H 2.4.6).

> ACL Data RX: Handle 3585 flags 0x02 dlen 6
      SMP: Security Request (0x0b) len 1
        Authentication requirement: Bonding, No MITM, SC, No Keypresses (0x09)
< HCI Command: LE Start Encryption (0x08|0x0019) plen 28
        Handle: 3585
        Random number: 0x0000000000000000
        Encrypted diversifier: 0x0000
        Long term key: 44264272a5c426a9e868f034cf0e69f3
> HCI Event: Command Status (0x0f) plen 4
      LE Start Encryption (0x08|0x0019) ncmd 1
        Status: Success (0x00)
> HCI Event: Encryption Key Refresh Complete (0x30) plen 3
        Status: Success (0x00)
        Handle: 3585

Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bluetooth/smp.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -1178,8 +1178,14 @@ static u8 smp_cmd_security_req(struct l2
 	else
 		sec_level = authreq_to_seclevel(auth);
 
-	if (smp_sufficient_security(hcon, sec_level))
+	if (smp_sufficient_security(hcon, sec_level)) {
+		/* If link is already encrypted with sufficient security we
+		 * still need refresh encryption as per Core Spec 5.0 Vol 3,
+		 * Part H 2.4.6
+		 */
+		smp_ltk_encrypt(conn, hcon->sec_level);
 		return 0;
+	}
 
 	if (sec_level > hcon->pending_sec_level)
 		hcon->pending_sec_level = sec_level;

[PATCH 3.18 56/93] scsi: virtio_scsi: always read VPD pages for multiqueue too

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Bonzini <pbonzini@redhat.com>

commit a680f1d463aeaeb00d22af257a56e111967c2f18 upstream.

Multi-queue virtio-scsi uses a different scsi_host_template struct.  Add
the .device_alloc field there, too.

Fixes: 25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0
Cc: stable@vger.kernel.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/virtio_scsi.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -794,6 +794,7 @@ static struct scsi_host_template virtscs
 	.change_queue_depth = virtscsi_change_queue_depth,
 	.eh_abort_handler = virtscsi_abort,
 	.eh_device_reset_handler = virtscsi_device_reset,
+	.slave_alloc = virtscsi_device_alloc,
 
 	.can_queue = 1024,
 	.dma_boundary = UINT_MAX,

[PATCH 3.18 57/93] media: v4l2-ioctl.c: dont copy back the result for -ENOTTY

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 181a4a2d5a0a7b43cab08a70710d727e7764ccdd upstream.

If the ioctl returned -ENOTTY, then don't bother copying
back the result as there is no point.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/v4l2-core/v4l2-ioctl.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -2539,8 +2539,11 @@ video_usercopy(struct file *file, unsign
 
 	/* Handles IOCTL */
 	err = func(file, cmd, parg);
-	if (err == -ENOIOCTLCMD)
+	if (err == -ENOTTY || err == -ENOIOCTLCMD) {
 		err = -ENOTTY;
+		goto out;
+	}
+
 	if (err == 0) {
 		if (cmd == VIDIOC_DQBUF)
 			trace_v4l2_dqbuf(video_devdata(file)->minor, parg);

[PATCH 3.18 58/93] [media] vb2: V4L2_BUF_FLAG_DONE is set after DQBUF

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ricardo Ribalda <ricardo.ribalda@gmail.com>

commit 3171cc2b4eb9831ab4df1d80d0410a945b8bc84e upstream.

According to the doc, V4L2_BUF_FLAG_DONE is cleared after DQBUF:

V4L2_BUF_FLAG_DONE 0x00000004  ... After calling the VIDIOC_QBUF or
VIDIOC_DQBUF it is always cleared ...

Unfortunately, it seems that videobuf2 keeps it set after DQBUF. This
can be tested with vivid and dev_debug:

[257604.338082] video1: VIDIOC_DQBUF: 71:33:25.00260479 index=3,
type=vid-cap, flags=0x00002004, field=none, sequence=163,
memory=userptr, bytesused=460800, offset/userptr=0x344b000,
length=460800

This patch forces FLAG_DONE to 0 after calling DQBUF.

Reported-by: Dimitrios Katsaros <patcherwork@gmail.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/v4l2-core/videobuf2-core.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/media/v4l2-core/videobuf2-core.c
+++ b/drivers/media/v4l2-core/videobuf2-core.c
@@ -2075,6 +2075,11 @@ static int vb2_internal_dqbuf(struct vb2
 	dprintk(1, "dqbuf of buffer %d, with state %d\n",
 			vb->v4l2_buf.index, vb->state);
 
+	/*
+	 * After calling the VIDIOC_DQBUF V4L2_BUF_FLAG_DONE must be
+	 * cleared.
+	 */
+	b->flags &= ~V4L2_BUF_FLAG_DONE;
 	return 0;
 }
 

[PATCH 3.18 59/93] media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 3ee6d040719ae09110e5cdf24d5386abe5d1b776 upstream.

The result of the VIDIOC_PREPARE_BUF ioctl was never copied back
to userspace since it was missing in the switch.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -996,6 +996,7 @@ static long do_video_ioctl(struct file *
 		err = put_v4l2_create32(&karg.v2crt, up);
 		break;
 
+	case VIDIOC_PREPARE_BUF:
 	case VIDIOC_QUERYBUF:
 	case VIDIOC_QBUF:
 	case VIDIOC_DQBUF:

[PATCH 3.18 60/93] media: v4l2-compat-ioctl32.c: fix the indentation

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit b7b957d429f601d6d1942122b339474f31191d75 upstream.

The indentation of this source is all over the place. Fix this.
This patch only changes whitespace.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org>      # for v4.15 and up
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |  216 +++++++++++++-------------
 1 file changed, 108 insertions(+), 108 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -48,11 +48,11 @@ struct v4l2_window32 {
 static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
 {
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_window32)) ||
-		copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
-		get_user(kp->field, &up->field) ||
-		get_user(kp->chromakey, &up->chromakey) ||
-		get_user(kp->clipcount, &up->clipcount))
-			return -EFAULT;
+	    copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
+	    get_user(kp->field, &up->field) ||
+	    get_user(kp->chromakey, &up->chromakey) ||
+	    get_user(kp->clipcount, &up->clipcount))
+		return -EFAULT;
 	if (kp->clipcount > 2048)
 		return -EINVAL;
 	if (kp->clipcount) {
@@ -82,10 +82,10 @@ static int get_v4l2_window32(struct v4l2
 static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
 {
 	if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) ||
-		put_user(kp->field, &up->field) ||
-		put_user(kp->chromakey, &up->chromakey) ||
-		put_user(kp->clipcount, &up->clipcount))
-			return -EFAULT;
+	    put_user(kp->field, &up->field) ||
+	    put_user(kp->chromakey, &up->chromakey) ||
+	    put_user(kp->clipcount, &up->clipcount))
+		return -EFAULT;
 	return 0;
 }
 
@@ -97,7 +97,7 @@ static inline int get_v4l2_pix_format(st
 }
 
 static inline int get_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp,
-				struct v4l2_pix_format_mplane __user *up)
+					     struct v4l2_pix_format_mplane __user *up)
 {
 	if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format_mplane)))
 		return -EFAULT;
@@ -112,7 +112,7 @@ static inline int put_v4l2_pix_format(st
 }
 
 static inline int put_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp,
-				struct v4l2_pix_format_mplane __user *up)
+					     struct v4l2_pix_format_mplane __user *up)
 {
 	if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format_mplane)))
 		return -EFAULT;
@@ -200,7 +200,7 @@ static int __get_v4l2_format32(struct v4
 		return get_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced);
 	default:
 		printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
-								kp->type);
+		       kp->type);
 		return -EINVAL;
 	}
 }
@@ -241,7 +241,7 @@ static int __put_v4l2_format32(struct v4
 		return put_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced);
 	default:
 		printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
-								kp->type);
+		       kp->type);
 		return -EINVAL;
 	}
 }
@@ -275,7 +275,7 @@ static int get_v4l2_standard32(struct v4
 {
 	/* other fields are not set by the user, nor used by the driver */
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_standard32)) ||
-		get_user(kp->index, &up->index))
+	    get_user(kp->index, &up->index))
 		return -EFAULT;
 	return 0;
 }
@@ -283,13 +283,13 @@ static int get_v4l2_standard32(struct v4
 static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_standard32)) ||
-		put_user(kp->index, &up->index) ||
-		copy_to_user(up->id, &kp->id, sizeof(__u64)) ||
-		copy_to_user(up->name, kp->name, 24) ||
-		copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) ||
-		put_user(kp->framelines, &up->framelines) ||
-		copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32)))
-			return -EFAULT;
+	    put_user(kp->index, &up->index) ||
+	    copy_to_user(up->id, &kp->id, sizeof(__u64)) ||
+	    copy_to_user(up->name, kp->name, 24) ||
+	    copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) ||
+	    put_user(kp->framelines, &up->framelines) ||
+	    copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -329,14 +329,14 @@ struct v4l2_buffer32 {
 };
 
 static int get_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32,
-				enum v4l2_memory memory)
+			    enum v4l2_memory memory)
 {
 	void __user *up_pln;
 	compat_long_t p;
 
 	if (copy_in_user(up, up32, 2 * sizeof(__u32)) ||
-		copy_in_user(&up->data_offset, &up32->data_offset,
-				sizeof(__u32)))
+	    copy_in_user(&up->data_offset, &up32->data_offset,
+			 sizeof(__u32)))
 		return -EFAULT;
 
 	if (memory == V4L2_MEMORY_USERPTR) {
@@ -350,7 +350,7 @@ static int get_v4l2_plane32(struct v4l2_
 			return -EFAULT;
 	} else {
 		if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset,
-					sizeof(__u32)))
+				 sizeof(__u32)))
 			return -EFAULT;
 	}
 
@@ -358,23 +358,23 @@ static int get_v4l2_plane32(struct v4l2_
 }
 
 static int put_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32,
-				enum v4l2_memory memory)
+			    enum v4l2_memory memory)
 {
 	if (copy_in_user(up32, up, 2 * sizeof(__u32)) ||
-		copy_in_user(&up32->data_offset, &up->data_offset,
-				sizeof(__u32)))
+	    copy_in_user(&up32->data_offset, &up->data_offset,
+			 sizeof(__u32)))
 		return -EFAULT;
 
 	/* For MMAP, driver might've set up the offset, so copy it back.
 	 * USERPTR stays the same (was userspace-provided), so no copying. */
 	if (memory == V4L2_MEMORY_MMAP)
 		if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset,
-					sizeof(__u32)))
+				 sizeof(__u32)))
 			return -EFAULT;
 	/* For DMABUF, driver might've set up the fd, so copy it back. */
 	if (memory == V4L2_MEMORY_DMABUF)
 		if (copy_in_user(&up32->m.fd, &up->m.fd,
-					sizeof(int)))
+				 sizeof(int)))
 			return -EFAULT;
 
 	return 0;
@@ -389,19 +389,19 @@ static int get_v4l2_buffer32(struct v4l2
 	int ret;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_buffer32)) ||
-		get_user(kp->index, &up->index) ||
-		get_user(kp->type, &up->type) ||
-		get_user(kp->flags, &up->flags) ||
-		get_user(kp->memory, &up->memory) ||
-		get_user(kp->length, &up->length))
-			return -EFAULT;
+	    get_user(kp->index, &up->index) ||
+	    get_user(kp->type, &up->type) ||
+	    get_user(kp->flags, &up->flags) ||
+	    get_user(kp->memory, &up->memory) ||
+	    get_user(kp->length, &up->length))
+		return -EFAULT;
 
 	if (V4L2_TYPE_IS_OUTPUT(kp->type))
 		if (get_user(kp->bytesused, &up->bytesused) ||
-			get_user(kp->field, &up->field) ||
-			get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-			get_user(kp->timestamp.tv_usec,
-					&up->timestamp.tv_usec))
+		    get_user(kp->field, &up->field) ||
+		    get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
+		    get_user(kp->timestamp.tv_usec,
+			     &up->timestamp.tv_usec))
 			return -EFAULT;
 
 	if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
@@ -418,13 +418,13 @@ static int get_v4l2_buffer32(struct v4l2
 
 		uplane32 = compat_ptr(p);
 		if (!access_ok(VERIFY_READ, uplane32,
-				num_planes * sizeof(struct v4l2_plane32)))
+			       num_planes * sizeof(struct v4l2_plane32)))
 			return -EFAULT;
 
 		/* We don't really care if userspace decides to kill itself
 		 * by passing a very big num_planes value */
 		uplane = compat_alloc_user_space(num_planes *
-						sizeof(struct v4l2_plane));
+						 sizeof(struct v4l2_plane));
 		kp->m.planes = (__force struct v4l2_plane *)uplane;
 
 		while (--num_planes >= 0) {
@@ -442,12 +442,12 @@ static int get_v4l2_buffer32(struct v4l2
 			break;
 		case V4L2_MEMORY_USERPTR:
 			{
-			compat_long_t tmp;
+				compat_long_t tmp;
 
-			if (get_user(tmp, &up->m.userptr))
-				return -EFAULT;
+				if (get_user(tmp, &up->m.userptr))
+					return -EFAULT;
 
-			kp->m.userptr = (unsigned long)compat_ptr(tmp);
+				kp->m.userptr = (unsigned long)compat_ptr(tmp);
 			}
 			break;
 		case V4L2_MEMORY_OVERLAY:
@@ -473,22 +473,22 @@ static int put_v4l2_buffer32(struct v4l2
 	int ret;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_buffer32)) ||
-		put_user(kp->index, &up->index) ||
-		put_user(kp->type, &up->type) ||
-		put_user(kp->flags, &up->flags) ||
-		put_user(kp->memory, &up->memory))
-			return -EFAULT;
+	    put_user(kp->index, &up->index) ||
+	    put_user(kp->type, &up->type) ||
+	    put_user(kp->flags, &up->flags) ||
+	    put_user(kp->memory, &up->memory))
+		return -EFAULT;
 
 	if (put_user(kp->bytesused, &up->bytesused) ||
-		put_user(kp->field, &up->field) ||
-		put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-		put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) ||
-		copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) ||
-		put_user(kp->sequence, &up->sequence) ||
-		put_user(kp->reserved2, &up->reserved2) ||
-		put_user(kp->reserved, &up->reserved) ||
-		put_user(kp->length, &up->length))
-			return -EFAULT;
+	    put_user(kp->field, &up->field) ||
+	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
+	    put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) ||
+	    copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) ||
+	    put_user(kp->sequence, &up->sequence) ||
+	    put_user(kp->reserved2, &up->reserved2) ||
+	    put_user(kp->reserved, &up->reserved) ||
+	    put_user(kp->length, &up->length))
+		return -EFAULT;
 
 	if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
 		num_planes = kp->length;
@@ -552,11 +552,11 @@ static int get_v4l2_framebuffer32(struct
 	u32 tmp;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_framebuffer32)) ||
-		get_user(tmp, &up->base) ||
-		get_user(kp->capability, &up->capability) ||
-		get_user(kp->flags, &up->flags) ||
-		copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt)))
-			return -EFAULT;
+	    get_user(tmp, &up->base) ||
+	    get_user(kp->capability, &up->capability) ||
+	    get_user(kp->flags, &up->flags) ||
+	    copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt)))
+		return -EFAULT;
 	kp->base = (__force void *)compat_ptr(tmp);
 	return 0;
 }
@@ -566,11 +566,11 @@ static int put_v4l2_framebuffer32(struct
 	u32 tmp = (u32)((unsigned long)kp->base);
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_framebuffer32)) ||
-		put_user(tmp, &up->base) ||
-		put_user(kp->capability, &up->capability) ||
-		put_user(kp->flags, &up->flags) ||
-		copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt)))
-			return -EFAULT;
+	    put_user(tmp, &up->base) ||
+	    put_user(kp->capability, &up->capability) ||
+	    put_user(kp->flags, &up->flags) ||
+	    copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -602,11 +602,11 @@ static inline int put_v4l2_input32(struc
 }
 
 struct v4l2_ext_controls32 {
-       __u32 ctrl_class;
-       __u32 count;
-       __u32 error_idx;
-       __u32 reserved[2];
-       compat_caddr_t controls; /* actually struct v4l2_ext_control32 * */
+	__u32 ctrl_class;
+	__u32 count;
+	__u32 error_idx;
+	__u32 reserved[2];
+	compat_caddr_t controls; /* actually struct v4l2_ext_control32 * */
 };
 
 struct v4l2_ext_control32 {
@@ -645,11 +645,11 @@ static int get_v4l2_ext_controls32(struc
 	compat_caddr_t p;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_ext_controls32)) ||
-		get_user(kp->ctrl_class, &up->ctrl_class) ||
-		get_user(kp->count, &up->count) ||
-		get_user(kp->error_idx, &up->error_idx) ||
-		copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
-			return -EFAULT;
+	    get_user(kp->ctrl_class, &up->ctrl_class) ||
+	    get_user(kp->count, &up->count) ||
+	    get_user(kp->error_idx, &up->error_idx) ||
+	    copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
+		return -EFAULT;
 	n = kp->count;
 	if (n == 0) {
 		kp->controls = NULL;
@@ -659,7 +659,7 @@ static int get_v4l2_ext_controls32(struc
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
 	if (!access_ok(VERIFY_READ, ucontrols,
-			n * sizeof(struct v4l2_ext_control32)))
+		       n * sizeof(struct v4l2_ext_control32)))
 		return -EFAULT;
 	kcontrols = compat_alloc_user_space(n * sizeof(struct v4l2_ext_control));
 	kp->controls = (__force struct v4l2_ext_control *)kcontrols;
@@ -694,11 +694,11 @@ static int put_v4l2_ext_controls32(struc
 	compat_caddr_t p;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_ext_controls32)) ||
-		put_user(kp->ctrl_class, &up->ctrl_class) ||
-		put_user(kp->count, &up->count) ||
-		put_user(kp->error_idx, &up->error_idx) ||
-		copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
-			return -EFAULT;
+	    put_user(kp->ctrl_class, &up->ctrl_class) ||
+	    put_user(kp->count, &up->count) ||
+	    put_user(kp->error_idx, &up->error_idx) ||
+	    copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
+		return -EFAULT;
 	if (!kp->count)
 		return 0;
 
@@ -706,7 +706,7 @@ static int put_v4l2_ext_controls32(struc
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
 	if (!access_ok(VERIFY_WRITE, ucontrols,
-			n * sizeof(struct v4l2_ext_control32)))
+		       n * sizeof(struct v4l2_ext_control32)))
 		return -EFAULT;
 
 	while (--n >= 0) {
@@ -743,15 +743,15 @@ struct v4l2_event32 {
 static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_event32)) ||
-		put_user(kp->type, &up->type) ||
-		copy_to_user(&up->u, &kp->u, sizeof(kp->u)) ||
-		put_user(kp->pending, &up->pending) ||
-		put_user(kp->sequence, &up->sequence) ||
-		put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-		put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) ||
-		put_user(kp->id, &up->id) ||
-		copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32)))
-			return -EFAULT;
+	    put_user(kp->type, &up->type) ||
+	    copy_to_user(&up->u, &kp->u, sizeof(kp->u)) ||
+	    put_user(kp->pending, &up->pending) ||
+	    put_user(kp->sequence, &up->sequence) ||
+	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
+	    put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) ||
+	    put_user(kp->id, &up->id) ||
+	    copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -768,12 +768,12 @@ static int get_v4l2_edid32(struct v4l2_e
 	u32 tmp;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_edid32)) ||
-		get_user(kp->pad, &up->pad) ||
-		get_user(kp->start_block, &up->start_block) ||
-		get_user(kp->blocks, &up->blocks) ||
-		get_user(tmp, &up->edid) ||
-		copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
-			return -EFAULT;
+	    get_user(kp->pad, &up->pad) ||
+	    get_user(kp->start_block, &up->start_block) ||
+	    get_user(kp->blocks, &up->blocks) ||
+	    get_user(tmp, &up->edid) ||
+	    copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
+		return -EFAULT;
 	kp->edid = (__force u8 *)compat_ptr(tmp);
 	return 0;
 }
@@ -783,12 +783,12 @@ static int put_v4l2_edid32(struct v4l2_e
 	u32 tmp = (u32)((unsigned long)kp->edid);
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_edid32)) ||
-		put_user(kp->pad, &up->pad) ||
-		put_user(kp->start_block, &up->start_block) ||
-		put_user(kp->blocks, &up->blocks) ||
-		put_user(tmp, &up->edid) ||
-		copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
-			return -EFAULT;
+	    put_user(kp->pad, &up->pad) ||
+	    put_user(kp->start_block, &up->start_block) ||
+	    put_user(kp->blocks, &up->blocks) ||
+	    put_user(tmp, &up->edid) ||
+	    copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
+		return -EFAULT;
 	return 0;
 }
 

[PATCH 3.18 61/93] media: v4l2-compat-ioctl32.c: move helper functions to __get/put_v4l2_format32

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 486c521510c44a04cd756a9267e7d1e271c8a4ba upstream.

These helper functions do not really help. Move the code to the
__get/put_v4l2_format32 functions.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |   84 ++++----------------------
 1 file changed, 16 insertions(+), 68 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -89,64 +89,6 @@ static int put_v4l2_window32(struct v4l2
 	return 0;
 }
 
-static inline int get_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up)
-{
-	if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int get_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp,
-					     struct v4l2_pix_format_mplane __user *up)
-{
-	if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format_mplane)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int put_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up)
-{
-	if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int put_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp,
-					     struct v4l2_pix_format_mplane __user *up)
-{
-	if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format_mplane)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int get_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up)
-{
-	if (copy_from_user(kp, up, sizeof(struct v4l2_vbi_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int put_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up)
-{
-	if (copy_to_user(up, kp, sizeof(struct v4l2_vbi_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int get_v4l2_sliced_vbi_format(struct v4l2_sliced_vbi_format *kp, struct v4l2_sliced_vbi_format __user *up)
-{
-	if (copy_from_user(kp, up, sizeof(struct v4l2_sliced_vbi_format)))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int put_v4l2_sliced_vbi_format(struct v4l2_sliced_vbi_format *kp, struct v4l2_sliced_vbi_format __user *up)
-{
-	if (copy_to_user(up, kp, sizeof(struct v4l2_sliced_vbi_format)))
-		return -EFAULT;
-	return 0;
-}
-
 struct v4l2_format32 {
 	__u32	type;	/* enum v4l2_buf_type */
 	union {
@@ -184,20 +126,23 @@ static int __get_v4l2_format32(struct v4
 	switch (kp->type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		return get_v4l2_pix_format(&kp->fmt.pix, &up->fmt.pix);
+		return copy_from_user(&kp->fmt.pix, &up->fmt.pix,
+				      sizeof(kp->fmt.pix)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		return get_v4l2_pix_format_mplane(&kp->fmt.pix_mp,
-						  &up->fmt.pix_mp);
+		return copy_from_user(&kp->fmt.pix_mp, &up->fmt.pix_mp,
+				      sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
 		return get_v4l2_window32(&kp->fmt.win, &up->fmt.win);
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_VBI_OUTPUT:
-		return get_v4l2_vbi_format(&kp->fmt.vbi, &up->fmt.vbi);
+		return copy_from_user(&kp->fmt.vbi, &up->fmt.vbi,
+				      sizeof(kp->fmt.vbi)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-		return get_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced);
+		return copy_from_user(&kp->fmt.sliced, &up->fmt.sliced,
+				      sizeof(kp->fmt.sliced)) ? -EFAULT : 0;
 	default:
 		printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
 		       kp->type);
@@ -225,20 +170,23 @@ static int __put_v4l2_format32(struct v4
 	switch (kp->type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		return put_v4l2_pix_format(&kp->fmt.pix, &up->fmt.pix);
+		return copy_to_user(&up->fmt.pix, &kp->fmt.pix,
+				    sizeof(kp->fmt.pix)) ?  -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		return put_v4l2_pix_format_mplane(&kp->fmt.pix_mp,
-						  &up->fmt.pix_mp);
+		return copy_to_user(&up->fmt.pix_mp, &kp->fmt.pix_mp,
+				    sizeof(kp->fmt.pix_mp)) ?  -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
 		return put_v4l2_window32(&kp->fmt.win, &up->fmt.win);
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_VBI_OUTPUT:
-		return put_v4l2_vbi_format(&kp->fmt.vbi, &up->fmt.vbi);
+		return copy_to_user(&up->fmt.vbi, &kp->fmt.vbi,
+				    sizeof(kp->fmt.vbi)) ?  -EFAULT : 0;
 	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-		return put_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced);
+		return copy_to_user(&up->fmt.sliced, &kp->fmt.sliced,
+				    sizeof(kp->fmt.sliced)) ?  -EFAULT : 0;
 	default:
 		printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
 		       kp->type);

[PATCH 3.18 62/93] media: v4l2-compat-ioctl32.c: avoid sizeof(type)

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 333b1e9f96ce05f7498b581509bb30cde03018bf upstream.

Instead of doing sizeof(struct foo) use sizeof(*up). There even were
cases where 4 * sizeof(__u32) was used instead of sizeof(kp->reserved),
which is very dangerous when the size of the reserved array changes.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |   80 ++++++++++++--------------
 1 file changed, 38 insertions(+), 42 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -47,7 +47,7 @@ struct v4l2_window32 {
 
 static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_window32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
 	    get_user(kp->field, &up->field) ||
 	    get_user(kp->chromakey, &up->chromakey) ||
@@ -64,7 +64,7 @@ static int get_v4l2_window32(struct v4l2
 		if (get_user(p, &up->clips))
 			return -EFAULT;
 		uclips = compat_ptr(p);
-		kclips = compat_alloc_user_space(n * sizeof(struct v4l2_clip));
+		kclips = compat_alloc_user_space(n * sizeof(*kclips));
 		kp->clips = kclips;
 		while (--n >= 0) {
 			if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
@@ -152,14 +152,14 @@ static int __get_v4l2_format32(struct v4
 
 static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_format32)))
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)))
 		return -EFAULT;
 	return __get_v4l2_format32(kp, up);
 }
 
 static int get_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_create_buffers32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format)))
 		return -EFAULT;
 	return __get_v4l2_format32(&kp->format, &up->format);
@@ -196,17 +196,17 @@ static int __put_v4l2_format32(struct v4
 
 static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_format32)) ||
-		put_user(kp->type, &up->type))
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)))
 		return -EFAULT;
 	return __put_v4l2_format32(kp, up);
 }
 
 static int put_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_create_buffers32)) ||
-	    copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format.fmt)))
-			return -EFAULT;
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
+	    copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format)) ||
+	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
+		return -EFAULT;
 	return __put_v4l2_format32(&kp->format, &up->format);
 }
 
@@ -222,7 +222,7 @@ struct v4l2_standard32 {
 static int get_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up)
 {
 	/* other fields are not set by the user, nor used by the driver */
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_standard32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(kp->index, &up->index))
 		return -EFAULT;
 	return 0;
@@ -230,13 +230,13 @@ static int get_v4l2_standard32(struct v4
 
 static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_standard32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(kp->index, &up->index) ||
 	    copy_to_user(up->id, &kp->id, sizeof(__u64)) ||
-	    copy_to_user(up->name, kp->name, 24) ||
+	    copy_to_user(up->name, kp->name, sizeof(up->name)) ||
 	    copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) ||
 	    put_user(kp->framelines, &up->framelines) ||
-	    copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32)))
+	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
 		return -EFAULT;
 	return 0;
 }
@@ -284,7 +284,7 @@ static int get_v4l2_plane32(struct v4l2_
 
 	if (copy_in_user(up, up32, 2 * sizeof(__u32)) ||
 	    copy_in_user(&up->data_offset, &up32->data_offset,
-			 sizeof(__u32)))
+			 sizeof(up->data_offset)))
 		return -EFAULT;
 
 	if (memory == V4L2_MEMORY_USERPTR) {
@@ -294,11 +294,11 @@ static int get_v4l2_plane32(struct v4l2_
 		if (put_user((unsigned long)up_pln, &up->m.userptr))
 			return -EFAULT;
 	} else if (memory == V4L2_MEMORY_DMABUF) {
-		if (copy_in_user(&up->m.fd, &up32->m.fd, sizeof(int)))
+		if (copy_in_user(&up->m.fd, &up32->m.fd, sizeof(up32->m.fd)))
 			return -EFAULT;
 	} else {
 		if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset,
-				 sizeof(__u32)))
+				 sizeof(up32->m.mem_offset)))
 			return -EFAULT;
 	}
 
@@ -310,19 +310,19 @@ static int put_v4l2_plane32(struct v4l2_
 {
 	if (copy_in_user(up32, up, 2 * sizeof(__u32)) ||
 	    copy_in_user(&up32->data_offset, &up->data_offset,
-			 sizeof(__u32)))
+			 sizeof(up->data_offset)))
 		return -EFAULT;
 
 	/* For MMAP, driver might've set up the offset, so copy it back.
 	 * USERPTR stays the same (was userspace-provided), so no copying. */
 	if (memory == V4L2_MEMORY_MMAP)
 		if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset,
-				 sizeof(__u32)))
+				 sizeof(up->m.mem_offset)))
 			return -EFAULT;
 	/* For DMABUF, driver might've set up the fd, so copy it back. */
 	if (memory == V4L2_MEMORY_DMABUF)
 		if (copy_in_user(&up32->m.fd, &up->m.fd,
-				 sizeof(int)))
+				 sizeof(up->m.fd)))
 			return -EFAULT;
 
 	return 0;
@@ -336,7 +336,7 @@ static int get_v4l2_buffer32(struct v4l2
 	int num_planes;
 	int ret;
 
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_buffer32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(kp->index, &up->index) ||
 	    get_user(kp->type, &up->type) ||
 	    get_user(kp->flags, &up->flags) ||
@@ -348,8 +348,7 @@ static int get_v4l2_buffer32(struct v4l2
 		if (get_user(kp->bytesused, &up->bytesused) ||
 		    get_user(kp->field, &up->field) ||
 		    get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-		    get_user(kp->timestamp.tv_usec,
-			     &up->timestamp.tv_usec))
+		    get_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec))
 			return -EFAULT;
 
 	if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
@@ -366,13 +365,12 @@ static int get_v4l2_buffer32(struct v4l2
 
 		uplane32 = compat_ptr(p);
 		if (!access_ok(VERIFY_READ, uplane32,
-			       num_planes * sizeof(struct v4l2_plane32)))
+			       num_planes * sizeof(*uplane32)))
 			return -EFAULT;
 
 		/* We don't really care if userspace decides to kill itself
 		 * by passing a very big num_planes value */
-		uplane = compat_alloc_user_space(num_planes *
-						 sizeof(struct v4l2_plane));
+		uplane = compat_alloc_user_space(num_planes * sizeof(*uplane));
 		kp->m.planes = (__force struct v4l2_plane *)uplane;
 
 		while (--num_planes >= 0) {
@@ -420,7 +418,7 @@ static int put_v4l2_buffer32(struct v4l2
 	int num_planes;
 	int ret;
 
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_buffer32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(kp->index, &up->index) ||
 	    put_user(kp->type, &up->type) ||
 	    put_user(kp->flags, &up->flags) ||
@@ -431,7 +429,7 @@ static int put_v4l2_buffer32(struct v4l2
 	    put_user(kp->field, &up->field) ||
 	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
 	    put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) ||
-	    copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) ||
+	    copy_to_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) ||
 	    put_user(kp->sequence, &up->sequence) ||
 	    put_user(kp->reserved2, &up->reserved2) ||
 	    put_user(kp->reserved, &up->reserved) ||
@@ -499,7 +497,7 @@ static int get_v4l2_framebuffer32(struct
 {
 	u32 tmp;
 
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_framebuffer32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(tmp, &up->base) ||
 	    get_user(kp->capability, &up->capability) ||
 	    get_user(kp->flags, &up->flags) ||
@@ -513,7 +511,7 @@ static int put_v4l2_framebuffer32(struct
 {
 	u32 tmp = (u32)((unsigned long)kp->base);
 
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_framebuffer32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(tmp, &up->base) ||
 	    put_user(kp->capability, &up->capability) ||
 	    put_user(kp->flags, &up->flags) ||
@@ -537,14 +535,14 @@ struct v4l2_input32 {
    Otherwise it is identical to the 32-bit version. */
 static inline int get_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up)
 {
-	if (copy_from_user(kp, up, sizeof(struct v4l2_input32)))
+	if (copy_from_user(kp, up, sizeof(*up)))
 		return -EFAULT;
 	return 0;
 }
 
 static inline int put_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up)
 {
-	if (copy_to_user(up, kp, sizeof(struct v4l2_input32)))
+	if (copy_to_user(up, kp, sizeof(*up)))
 		return -EFAULT;
 	return 0;
 }
@@ -592,7 +590,7 @@ static int get_v4l2_ext_controls32(struc
 	int n;
 	compat_caddr_t p;
 
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_ext_controls32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(kp->ctrl_class, &up->ctrl_class) ||
 	    get_user(kp->count, &up->count) ||
 	    get_user(kp->error_idx, &up->error_idx) ||
@@ -606,10 +604,9 @@ static int get_v4l2_ext_controls32(struc
 	if (get_user(p, &up->controls))
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
-	if (!access_ok(VERIFY_READ, ucontrols,
-		       n * sizeof(struct v4l2_ext_control32)))
+	if (!access_ok(VERIFY_READ, ucontrols, n * sizeof(*ucontrols)))
 		return -EFAULT;
-	kcontrols = compat_alloc_user_space(n * sizeof(struct v4l2_ext_control));
+	kcontrols = compat_alloc_user_space(n * sizeof(*kcontrols));
 	kp->controls = (__force struct v4l2_ext_control *)kcontrols;
 	while (--n >= 0) {
 		u32 id;
@@ -641,7 +638,7 @@ static int put_v4l2_ext_controls32(struc
 	int n = kp->count;
 	compat_caddr_t p;
 
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_ext_controls32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(kp->ctrl_class, &up->ctrl_class) ||
 	    put_user(kp->count, &up->count) ||
 	    put_user(kp->error_idx, &up->error_idx) ||
@@ -653,8 +650,7 @@ static int put_v4l2_ext_controls32(struc
 	if (get_user(p, &up->controls))
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
-	if (!access_ok(VERIFY_WRITE, ucontrols,
-		       n * sizeof(struct v4l2_ext_control32)))
+	if (!access_ok(VERIFY_WRITE, ucontrols, n * sizeof(*ucontrols)))
 		return -EFAULT;
 
 	while (--n >= 0) {
@@ -690,7 +686,7 @@ struct v4l2_event32 {
 
 static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_event32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(kp->type, &up->type) ||
 	    copy_to_user(&up->u, &kp->u, sizeof(kp->u)) ||
 	    put_user(kp->pending, &up->pending) ||
@@ -698,7 +694,7 @@ static int put_v4l2_event32(struct v4l2_
 	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
 	    put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) ||
 	    put_user(kp->id, &up->id) ||
-	    copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32)))
+	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
 		return -EFAULT;
 	return 0;
 }
@@ -715,7 +711,7 @@ static int get_v4l2_edid32(struct v4l2_e
 {
 	u32 tmp;
 
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_edid32)) ||
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(kp->pad, &up->pad) ||
 	    get_user(kp->start_block, &up->start_block) ||
 	    get_user(kp->blocks, &up->blocks) ||
@@ -730,7 +726,7 @@ static int put_v4l2_edid32(struct v4l2_e
 {
 	u32 tmp = (u32)((unsigned long)kp->edid);
 
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_edid32)) ||
+	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
 	    put_user(kp->pad, &up->pad) ||
 	    put_user(kp->start_block, &up->start_block) ||
 	    put_user(kp->blocks, &up->blocks) ||

[PATCH 3.18 63/93] media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 8ed5a59dcb47a6f76034ee760b36e089f3e82529 upstream.

The struct v4l2_plane32 should set m.userptr as well. The same
happens in v4l2_buffer32 and v4l2-compliance tests for this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |   47 +++++++++++++++-----------
 1 file changed, 28 insertions(+), 19 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -287,19 +287,24 @@ static int get_v4l2_plane32(struct v4l2_
 			 sizeof(up->data_offset)))
 		return -EFAULT;
 
-	if (memory == V4L2_MEMORY_USERPTR) {
+	switch (memory) {
+	case V4L2_MEMORY_MMAP:
+	case V4L2_MEMORY_OVERLAY:
+		if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset,
+				 sizeof(up32->m.mem_offset)))
+			return -EFAULT;
+		break;
+	case V4L2_MEMORY_USERPTR:
 		if (get_user(p, &up32->m.userptr))
 			return -EFAULT;
 		up_pln = compat_ptr(p);
 		if (put_user((unsigned long)up_pln, &up->m.userptr))
 			return -EFAULT;
-	} else if (memory == V4L2_MEMORY_DMABUF) {
+		break;
+	case V4L2_MEMORY_DMABUF:
 		if (copy_in_user(&up->m.fd, &up32->m.fd, sizeof(up32->m.fd)))
 			return -EFAULT;
-	} else {
-		if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset,
-				 sizeof(up32->m.mem_offset)))
-			return -EFAULT;
+		break;
 	}
 
 	return 0;
@@ -308,22 +313,32 @@ static int get_v4l2_plane32(struct v4l2_
 static int put_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32,
 			    enum v4l2_memory memory)
 {
+	unsigned long p;
+
 	if (copy_in_user(up32, up, 2 * sizeof(__u32)) ||
 	    copy_in_user(&up32->data_offset, &up->data_offset,
 			 sizeof(up->data_offset)))
 		return -EFAULT;
 
-	/* For MMAP, driver might've set up the offset, so copy it back.
-	 * USERPTR stays the same (was userspace-provided), so no copying. */
-	if (memory == V4L2_MEMORY_MMAP)
+	switch (memory) {
+	case V4L2_MEMORY_MMAP:
+	case V4L2_MEMORY_OVERLAY:
 		if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset,
 				 sizeof(up->m.mem_offset)))
 			return -EFAULT;
-	/* For DMABUF, driver might've set up the fd, so copy it back. */
-	if (memory == V4L2_MEMORY_DMABUF)
+		break;
+	case V4L2_MEMORY_USERPTR:
+		if (get_user(p, &up->m.userptr) ||
+		    put_user((compat_ulong_t)ptr_to_compat((__force void *)p),
+			     &up32->m.userptr))
+			return -EFAULT;
+		break;
+	case V4L2_MEMORY_DMABUF:
 		if (copy_in_user(&up32->m.fd, &up->m.fd,
 				 sizeof(up->m.fd)))
 			return -EFAULT;
+		break;
+	}
 
 	return 0;
 }
@@ -383,6 +398,7 @@ static int get_v4l2_buffer32(struct v4l2
 	} else {
 		switch (kp->memory) {
 		case V4L2_MEMORY_MMAP:
+		case V4L2_MEMORY_OVERLAY:
 			if (get_user(kp->m.offset, &up->m.offset))
 				return -EFAULT;
 			break;
@@ -396,10 +412,6 @@ static int get_v4l2_buffer32(struct v4l2
 				kp->m.userptr = (unsigned long)compat_ptr(tmp);
 			}
 			break;
-		case V4L2_MEMORY_OVERLAY:
-			if (get_user(kp->m.offset, &up->m.offset))
-				return -EFAULT;
-			break;
 		case V4L2_MEMORY_DMABUF:
 			if (get_user(kp->m.fd, &up->m.fd))
 				return -EFAULT;
@@ -456,6 +468,7 @@ static int put_v4l2_buffer32(struct v4l2
 	} else {
 		switch (kp->memory) {
 		case V4L2_MEMORY_MMAP:
+		case V4L2_MEMORY_OVERLAY:
 			if (put_user(kp->m.offset, &up->m.offset))
 				return -EFAULT;
 			break;
@@ -463,10 +476,6 @@ static int put_v4l2_buffer32(struct v4l2
 			if (put_user(kp->m.userptr, &up->m.userptr))
 				return -EFAULT;
 			break;
-		case V4L2_MEMORY_OVERLAY:
-			if (put_user(kp->m.offset, &up->m.offset))
-				return -EFAULT;
-			break;
 		case V4L2_MEMORY_DMABUF:
 			if (put_user(kp->m.fd, &up->m.fd))
 				return -EFAULT;

[PATCH 3.18 64/93] media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit b8c601e8af2d08f733d74defa8465303391bb930 upstream.

ctrl_is_pointer just hardcoded two known string controls, but that
caused problems when using e.g. custom controls that use a pointer
for the payload.

Reimplement this function: it now finds the v4l2_ctrl (if the driver
uses the control framework) or it calls vidioc_query_ext_ctrl (if the
driver implements that directly).

In both cases it can now check if the control is a pointer control
or not.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |   59 +++++++++++++++++---------
 1 file changed, 39 insertions(+), 20 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -18,6 +18,8 @@
 #include <linux/videodev2.h>
 #include <linux/v4l2-subdev.h>
 #include <media/v4l2-dev.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-ioctl.h>
 
 static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -575,24 +577,39 @@ struct v4l2_ext_control32 {
 	};
 } __attribute__ ((packed));
 
-/* The following function really belong in v4l2-common, but that causes
-   a circular dependency between modules. We need to think about this, but
-   for now this will do. */
-
-/* Return non-zero if this control is a pointer type. Currently only
-   type STRING is a pointer type. */
-static inline int ctrl_is_pointer(u32 id)
-{
-	switch (id) {
-	case V4L2_CID_RDS_TX_PS_NAME:
-	case V4L2_CID_RDS_TX_RADIO_TEXT:
-		return 1;
-	default:
-		return 0;
+/* Return true if this control is a pointer type. */
+static inline bool ctrl_is_pointer(struct file *file, u32 id)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct v4l2_fh *fh = NULL;
+	struct v4l2_ctrl_handler *hdl = NULL;
+	struct v4l2_query_ext_ctrl qec = { id };
+	const struct v4l2_ioctl_ops *ops = vdev->ioctl_ops;
+
+	if (test_bit(V4L2_FL_USES_V4L2_FH, &vdev->flags))
+		fh = file->private_data;
+
+	if (fh && fh->ctrl_handler)
+		hdl = fh->ctrl_handler;
+	else if (vdev->ctrl_handler)
+		hdl = vdev->ctrl_handler;
+
+	if (hdl) {
+		struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, id);
+
+		return ctrl && ctrl->is_ptr;
 	}
+
+	if (!ops->vidioc_query_ext_ctrl)
+		return false;
+
+	return !ops->vidioc_query_ext_ctrl(file, fh, &qec) &&
+		(qec.flags & V4L2_CTRL_FLAG_HAS_PAYLOAD);
 }
 
-static int get_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext_controls32 __user *up)
+static int get_v4l2_ext_controls32(struct file *file,
+				   struct v4l2_ext_controls *kp,
+				   struct v4l2_ext_controls32 __user *up)
 {
 	struct v4l2_ext_control32 __user *ucontrols;
 	struct v4l2_ext_control __user *kcontrols;
@@ -624,7 +641,7 @@ static int get_v4l2_ext_controls32(struc
 			return -EFAULT;
 		if (get_user(id, &kcontrols->id))
 			return -EFAULT;
-		if (ctrl_is_pointer(id)) {
+		if (ctrl_is_pointer(file, id)) {
 			void __user *s;
 
 			if (get_user(p, &ucontrols->string))
@@ -639,7 +656,9 @@ static int get_v4l2_ext_controls32(struc
 	return 0;
 }
 
-static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext_controls32 __user *up)
+static int put_v4l2_ext_controls32(struct file *file,
+				   struct v4l2_ext_controls *kp,
+				   struct v4l2_ext_controls32 __user *up)
 {
 	struct v4l2_ext_control32 __user *ucontrols;
 	struct v4l2_ext_control __user *kcontrols =
@@ -671,7 +690,7 @@ static int put_v4l2_ext_controls32(struc
 		/* Do not modify the pointer when copying a pointer control.
 		   The contents of the pointer was changed, not the pointer
 		   itself. */
-		if (ctrl_is_pointer(id))
+		if (ctrl_is_pointer(file, id))
 			size -= sizeof(ucontrols->value64);
 		if (copy_in_user(ucontrols, kcontrols, size))
 			return -EFAULT;
@@ -884,7 +903,7 @@ static long do_video_ioctl(struct file *
 	case VIDIOC_G_EXT_CTRLS:
 	case VIDIOC_S_EXT_CTRLS:
 	case VIDIOC_TRY_EXT_CTRLS:
-		err = get_v4l2_ext_controls32(&karg.v2ecs, up);
+		err = get_v4l2_ext_controls32(file, &karg.v2ecs, up);
 		compatible_arg = 0;
 		break;
 	case VIDIOC_DQEVENT:
@@ -911,7 +930,7 @@ static long do_video_ioctl(struct file *
 	case VIDIOC_G_EXT_CTRLS:
 	case VIDIOC_S_EXT_CTRLS:
 	case VIDIOC_TRY_EXT_CTRLS:
-		if (put_v4l2_ext_controls32(&karg.v2ecs, up))
+		if (put_v4l2_ext_controls32(file, &karg.v2ecs, up))
 			err = -EFAULT;
 		break;
 	}

[PATCH 3.18 65/93] media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hansverk@cisco.com>

commit 273caa260035c03d89ad63d72d8cd3d9e5c5e3f1 upstream.

If the device is of type VFL_TYPE_SUBDEV then vdev->ioctl_ops
is NULL so the 'if (!ops->vidioc_query_ext_ctrl)' check would crash.
Add a test for !ops to the condition.

All sub-devices that have controls will use the control framework,
so they do not have an equivalent to ops->vidioc_query_ext_ctrl.
Returning false if ops is NULL is the correct thing to do here.

Fixes: b8c601e8af ("v4l2-compat-ioctl32.c: fix ctrl_is_pointer")

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -600,7 +600,7 @@ static inline bool ctrl_is_pointer(struc
 		return ctrl && ctrl->is_ptr;
 	}
 
-	if (!ops->vidioc_query_ext_ctrl)
+	if (!ops || !ops->vidioc_query_ext_ctrl)
 		return false;
 
 	return !ops->vidioc_query_ext_ctrl(file, fh, &qec) &&

[PATCH 3.18 66/93] media: v4l2-compat-ioctl32: Copy v4l2_window->global_alpha

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Mentz <danielmentz@google.com>

commit 025a26fa14f8fd55d50ab284a30c016a5be953d0 upstream.

Commit b2787845fb91 ("V4L/DVB (5289): Add support for video output
overlays.") added the field global_alpha to struct v4l2_window but did
not update the compat layer accordingly. This change adds global_alpha
to struct v4l2_window32 and copies the value for global_alpha back and
forth.

Signed-off-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -45,6 +45,7 @@ struct v4l2_window32 {
 	compat_caddr_t		clips; /* actually struct v4l2_clip32 * */
 	__u32			clipcount;
 	compat_caddr_t		bitmap;
+	__u8                    global_alpha;
 };
 
 static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
@@ -53,7 +54,8 @@ static int get_v4l2_window32(struct v4l2
 	    copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
 	    get_user(kp->field, &up->field) ||
 	    get_user(kp->chromakey, &up->chromakey) ||
-	    get_user(kp->clipcount, &up->clipcount))
+	    get_user(kp->clipcount, &up->clipcount) ||
+	    get_user(kp->global_alpha, &up->global_alpha))
 		return -EFAULT;
 	if (kp->clipcount > 2048)
 		return -EINVAL;
@@ -86,7 +88,8 @@ static int put_v4l2_window32(struct v4l2
 	if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) ||
 	    put_user(kp->field, &up->field) ||
 	    put_user(kp->chromakey, &up->chromakey) ||
-	    put_user(kp->clipcount, &up->clipcount))
+	    put_user(kp->clipcount, &up->clipcount) ||
+	    put_user(kp->global_alpha, &up->global_alpha))
 		return -EFAULT;
 	return 0;
 }

[PATCH 3.18 67/93] media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit a751be5b142ef6bcbbb96d9899516f4d9c8d0ef4 upstream.

put_v4l2_window32() didn't copy back the clip list to userspace.
Drivers can update the clip rectangles, so this should be done.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |   59 +++++++++++++++++---------
 1 file changed, 40 insertions(+), 19 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -50,6 +50,11 @@ struct v4l2_window32 {
 
 static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
 {
+	struct v4l2_clip32 __user *uclips;
+	struct v4l2_clip __user *kclips;
+	compat_caddr_t p;
+	u32 n;
+
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
 	    get_user(kp->field, &up->field) ||
@@ -59,38 +64,54 @@ static int get_v4l2_window32(struct v4l2
 		return -EFAULT;
 	if (kp->clipcount > 2048)
 		return -EINVAL;
-	if (kp->clipcount) {
-		struct v4l2_clip32 __user *uclips;
-		struct v4l2_clip __user *kclips;
-		int n = kp->clipcount;
-		compat_caddr_t p;
+	if (!kp->clipcount) {
+		kp->clips = NULL;
+		return 0;
+	}
 
-		if (get_user(p, &up->clips))
+	n = kp->clipcount;
+	if (get_user(p, &up->clips))
+		return -EFAULT;
+	uclips = compat_ptr(p);
+	kclips = compat_alloc_user_space(n * sizeof(*kclips));
+	kp->clips = kclips;
+	while (n--) {
+		if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
 			return -EFAULT;
-		uclips = compat_ptr(p);
-		kclips = compat_alloc_user_space(n * sizeof(*kclips));
-		kp->clips = kclips;
-		while (--n >= 0) {
-			if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
-				return -EFAULT;
-			if (put_user(n ? kclips + 1 : NULL, &kclips->next))
-				return -EFAULT;
-			uclips += 1;
-			kclips += 1;
-		}
-	} else
-		kp->clips = NULL;
+		if (put_user(n ? kclips + 1 : NULL, &kclips->next))
+			return -EFAULT;
+		uclips++;
+		kclips++;
+	}
 	return 0;
 }
 
 static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
 {
+	struct v4l2_clip __user *kclips = kp->clips;
+	struct v4l2_clip32 __user *uclips;
+	u32 n = kp->clipcount;
+	compat_caddr_t p;
+
 	if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) ||
 	    put_user(kp->field, &up->field) ||
 	    put_user(kp->chromakey, &up->chromakey) ||
 	    put_user(kp->clipcount, &up->clipcount) ||
 	    put_user(kp->global_alpha, &up->global_alpha))
 		return -EFAULT;
+
+	if (!kp->clipcount)
+		return 0;
+
+	if (get_user(p, &up->clips))
+		return -EFAULT;
+	uclips = compat_ptr(p);
+	while (n--) {
+		if (copy_in_user(&uclips->c, &kclips->c, sizeof(uclips->c)))
+			return -EFAULT;
+		uclips++;
+		kclips++;
+	}
 	return 0;
 }
 

[PATCH 3.18 68/93] media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 169f24ca68bf0f247d111aef07af00dd3a02ae88 upstream.

There is nothing wrong with using an unknown buffer type. So
stop spamming the kernel log whenever this happens. The kernel
will just return -EINVAL to signal this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -170,8 +170,6 @@ static int __get_v4l2_format32(struct v4
 		return copy_from_user(&kp->fmt.sliced, &up->fmt.sliced,
 				      sizeof(kp->fmt.sliced)) ? -EFAULT : 0;
 	default:
-		printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
-		       kp->type);
 		return -EINVAL;
 	}
 }
@@ -214,8 +212,6 @@ static int __put_v4l2_format32(struct v4
 		return copy_to_user(&up->fmt.sliced, &kp->fmt.sliced,
 				    sizeof(kp->fmt.sliced)) ?  -EFAULT : 0;
 	default:
-		printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
-		       kp->type);
 		return -EINVAL;
 	}
 }

[PATCH 3.18 69/93] media: v4l2-compat-ioctl32.c: dont copy back the result for certain errors

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit d83a8243aaefe62ace433e4384a4f077bed86acb upstream.

Some ioctls need to copy back the result even if the ioctl returned
an error. However, don't do this for the error code -ENOTTY.
It makes no sense in that cases.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -943,6 +943,9 @@ static long do_video_ioctl(struct file *
 		set_fs(old_fs);
 	}
 
+	if (err == -ENOTTY)
+		return err;
+
 	/* Special case: even after an error we need to put the
 	   results back for these ioctls since the error_idx will
 	   contain information on which control failed. */

[PATCH 3.18 70/93] media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Mentz <danielmentz@google.com>

commit a1dfb4c48cc1e64eeb7800a27c66a6f7e88d075a upstream.

The 32-bit compat v4l2 ioctl handling is implemented based on its 64-bit
equivalent. It converts 32-bit data structures into its 64-bit
equivalents and needs to provide the data to the 64-bit ioctl in user
space memory which is commonly allocated using
compat_alloc_user_space().

However, due to how that function is implemented, it can only be called
a single time for every syscall invocation.

Supposedly to avoid this limitation, the existing code uses a mix of
memory from the kernel stack and memory allocated through
compat_alloc_user_space().

Under normal circumstances, this would not work, because the 64-bit
ioctl expects all pointers to point to user space memory. As a
workaround, set_fs(KERNEL_DS) is called to temporarily disable this
extra safety check and allow kernel pointers. However, this might
introduce a security vulnerability: The result of the 32-bit to 64-bit
conversion is writeable by user space because the output buffer has been
allocated via compat_alloc_user_space(). A malicious user space process
could then manipulate pointers inside this output buffer, and due to the
previous set_fs(KERNEL_DS) call, functions like get_user() or put_user()
no longer prevent kernel memory access.

The new approach is to pre-calculate the total amount of user space
memory that is needed, allocate it using compat_alloc_user_space() and
then divide up the allocated memory to accommodate all data structures
that need to be converted.

An alternative approach would have been to retain the union type karg
that they allocated on the kernel stack in do_video_ioctl(), copy all
data from user space into karg and then back to user space. However, we
decided against this approach because it does not align with other
compat syscall implementations. Instead, we tried to replicate the
get_user/put_user pairs as found in other places in the kernel:

    if (get_user(clipcount, &up->clipcount) ||
        put_user(clipcount, &kp->clipcount)) return -EFAULT;

Notes from hans.verkuil@cisco.com:

This patch was taken from:
    https://github.com/LineageOS/android_kernel_samsung_apq8084/commit/97b733953c06e4f0398ade18850f0817778255f7

Clearly nobody could be bothered to upstream this patch or at minimum
tell us :-( We only heard about this a week ago.

This patch was rebased and cleaned up. Compared to the original I
also swapped the order of the convert_in_user arguments so that they
matched copy_in_user. It was hard to review otherwise. I also replaced
the ALLOC_USER_SPACE/ALLOC_AND_GET by a normal function.

Fixes: 6b5a9492ca ("v4l: introduce string control support.")

Signed-off-by: Daniel Mentz <danielmentz@google.com>
Co-developed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |  757 ++++++++++++++++----------
 1 file changed, 491 insertions(+), 266 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -22,6 +22,14 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-ioctl.h>
 
+/* Use the same argument order as copy_in_user */
+#define assign_in_user(to, from)					\
+({									\
+	typeof(*from) __assign_tmp;					\
+									\
+	get_user(__assign_tmp, from) || put_user(__assign_tmp, to);	\
+})
+
 static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	long ret = -ENOIOCTLCMD;
@@ -35,12 +43,12 @@ static long native_ioctl(struct file *fi
 
 struct v4l2_clip32 {
 	struct v4l2_rect        c;
-	compat_caddr_t 		next;
+	compat_caddr_t		next;
 };
 
 struct v4l2_window32 {
 	struct v4l2_rect        w;
-	__u32		  	field;	/* enum v4l2_field */
+	__u32			field;	/* enum v4l2_field */
 	__u32			chromakey;
 	compat_caddr_t		clips; /* actually struct v4l2_clip32 * */
 	__u32			clipcount;
@@ -48,37 +56,41 @@ struct v4l2_window32 {
 	__u8                    global_alpha;
 };
 
-static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
+static int get_v4l2_window32(struct v4l2_window __user *kp,
+			     struct v4l2_window32 __user *up,
+			     void __user *aux_buf, u32 aux_space)
 {
 	struct v4l2_clip32 __user *uclips;
 	struct v4l2_clip __user *kclips;
 	compat_caddr_t p;
-	u32 n;
+	u32 clipcount;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    copy_from_user(&kp->w, &up->w, sizeof(up->w)) ||
-	    get_user(kp->field, &up->field) ||
-	    get_user(kp->chromakey, &up->chromakey) ||
-	    get_user(kp->clipcount, &up->clipcount) ||
-	    get_user(kp->global_alpha, &up->global_alpha))
+	    copy_in_user(&kp->w, &up->w, sizeof(up->w)) ||
+	    assign_in_user(&kp->field, &up->field) ||
+	    assign_in_user(&kp->chromakey, &up->chromakey) ||
+	    assign_in_user(&kp->global_alpha, &up->global_alpha) ||
+	    get_user(clipcount, &up->clipcount) ||
+	    put_user(clipcount, &kp->clipcount))
 		return -EFAULT;
-	if (kp->clipcount > 2048)
+	if (clipcount > 2048)
 		return -EINVAL;
-	if (!kp->clipcount) {
-		kp->clips = NULL;
-		return 0;
-	}
+	if (!clipcount)
+		return put_user(NULL, &kp->clips);
 
-	n = kp->clipcount;
 	if (get_user(p, &up->clips))
 		return -EFAULT;
 	uclips = compat_ptr(p);
-	kclips = compat_alloc_user_space(n * sizeof(*kclips));
-	kp->clips = kclips;
-	while (n--) {
+	if (aux_space < clipcount * sizeof(*kclips))
+		return -EFAULT;
+	kclips = aux_buf;
+	if (put_user(kclips, &kp->clips))
+		return -EFAULT;
+
+	while (clipcount--) {
 		if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
 			return -EFAULT;
-		if (put_user(n ? kclips + 1 : NULL, &kclips->next))
+		if (put_user(clipcount ? kclips + 1 : NULL, &kclips->next))
 			return -EFAULT;
 		uclips++;
 		kclips++;
@@ -86,27 +98,28 @@ static int get_v4l2_window32(struct v4l2
 	return 0;
 }
 
-static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
+static int put_v4l2_window32(struct v4l2_window __user *kp,
+			     struct v4l2_window32 __user *up)
 {
 	struct v4l2_clip __user *kclips = kp->clips;
 	struct v4l2_clip32 __user *uclips;
-	u32 n = kp->clipcount;
 	compat_caddr_t p;
+	u32 clipcount;
 
-	if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) ||
-	    put_user(kp->field, &up->field) ||
-	    put_user(kp->chromakey, &up->chromakey) ||
-	    put_user(kp->clipcount, &up->clipcount) ||
-	    put_user(kp->global_alpha, &up->global_alpha))
+	if (copy_in_user(&up->w, &kp->w, sizeof(kp->w)) ||
+	    assign_in_user(&up->field, &kp->field) ||
+	    assign_in_user(&up->chromakey, &kp->chromakey) ||
+	    assign_in_user(&up->global_alpha, &kp->global_alpha) ||
+	    get_user(clipcount, &kp->clipcount) ||
+	    put_user(clipcount, &up->clipcount))
 		return -EFAULT;
-
-	if (!kp->clipcount)
+	if (!clipcount)
 		return 0;
 
 	if (get_user(p, &up->clips))
 		return -EFAULT;
 	uclips = compat_ptr(p);
-	while (n--) {
+	while (clipcount--) {
 		if (copy_in_user(&uclips->c, &kclips->c, sizeof(uclips->c)))
 			return -EFAULT;
 		uclips++;
@@ -144,90 +157,150 @@ struct v4l2_create_buffers32 {
 	__u32			reserved[8];
 };
 
-static int __get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+static int __bufsize_v4l2_format(struct v4l2_format32 __user *up, u32 *size)
+{
+	u32 type;
+
+	if (get_user(type, &up->type))
+		return -EFAULT;
+
+	switch (type) {
+	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: {
+		u32 clipcount;
+
+		if (get_user(clipcount, &up->fmt.win.clipcount))
+			return -EFAULT;
+		if (clipcount > 2048)
+			return -EINVAL;
+		*size = clipcount * sizeof(struct v4l2_clip);
+		return 0;
+	}
+	default:
+		*size = 0;
+		return 0;
+	}
+}
+
+static int bufsize_v4l2_format(struct v4l2_format32 __user *up, u32 *size)
 {
-	if (get_user(kp->type, &up->type))
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)))
 		return -EFAULT;
+	return __bufsize_v4l2_format(up, size);
+}
 
-	switch (kp->type) {
+static int __get_v4l2_format32(struct v4l2_format __user *kp,
+			       struct v4l2_format32 __user *up,
+			       void __user *aux_buf, u32 aux_space)
+{
+	u32 type;
+
+	if (get_user(type, &up->type) || put_user(type, &kp->type))
+		return -EFAULT;
+
+	switch (type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		return copy_from_user(&kp->fmt.pix, &up->fmt.pix,
-				      sizeof(kp->fmt.pix)) ? -EFAULT : 0;
+		return copy_in_user(&kp->fmt.pix, &up->fmt.pix,
+				    sizeof(kp->fmt.pix)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		return copy_from_user(&kp->fmt.pix_mp, &up->fmt.pix_mp,
-				      sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0;
+		return copy_in_user(&kp->fmt.pix_mp, &up->fmt.pix_mp,
+				    sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-		return get_v4l2_window32(&kp->fmt.win, &up->fmt.win);
+		return get_v4l2_window32(&kp->fmt.win, &up->fmt.win,
+					 aux_buf, aux_space);
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_VBI_OUTPUT:
-		return copy_from_user(&kp->fmt.vbi, &up->fmt.vbi,
-				      sizeof(kp->fmt.vbi)) ? -EFAULT : 0;
+		return copy_in_user(&kp->fmt.vbi, &up->fmt.vbi,
+				    sizeof(kp->fmt.vbi)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-		return copy_from_user(&kp->fmt.sliced, &up->fmt.sliced,
-				      sizeof(kp->fmt.sliced)) ? -EFAULT : 0;
+		return copy_in_user(&kp->fmt.sliced, &up->fmt.sliced,
+				    sizeof(kp->fmt.sliced)) ? -EFAULT : 0;
 	default:
 		return -EINVAL;
 	}
 }
 
-static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+static int get_v4l2_format32(struct v4l2_format __user *kp,
+			     struct v4l2_format32 __user *up,
+			     void __user *aux_buf, u32 aux_space)
 {
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)))
 		return -EFAULT;
-	return __get_v4l2_format32(kp, up);
+	return __get_v4l2_format32(kp, up, aux_buf, aux_space);
 }
 
-static int get_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
+static int bufsize_v4l2_create(struct v4l2_create_buffers32 __user *up,
+			       u32 *size)
+{
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)))
+		return -EFAULT;
+	return __bufsize_v4l2_format(&up->format, size);
+}
+
+static int get_v4l2_create32(struct v4l2_create_buffers __user *kp,
+			     struct v4l2_create_buffers32 __user *up,
+			     void __user *aux_buf, u32 aux_space)
 {
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format)))
+	    copy_in_user(kp, up,
+			 offsetof(struct v4l2_create_buffers32, format)))
 		return -EFAULT;
-	return __get_v4l2_format32(&kp->format, &up->format);
+	return __get_v4l2_format32(&kp->format, &up->format,
+				   aux_buf, aux_space);
 }
 
-static int __put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+static int __put_v4l2_format32(struct v4l2_format __user *kp,
+			       struct v4l2_format32 __user *up)
 {
-	switch (kp->type) {
+	u32 type;
+
+	if (get_user(type, &kp->type))
+		return -EFAULT;
+
+	switch (type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		return copy_to_user(&up->fmt.pix, &kp->fmt.pix,
-				    sizeof(kp->fmt.pix)) ?  -EFAULT : 0;
+		return copy_in_user(&up->fmt.pix, &kp->fmt.pix,
+				    sizeof(kp->fmt.pix)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
-		return copy_to_user(&up->fmt.pix_mp, &kp->fmt.pix_mp,
-				    sizeof(kp->fmt.pix_mp)) ?  -EFAULT : 0;
+		return copy_in_user(&up->fmt.pix_mp, &kp->fmt.pix_mp,
+				    sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
 		return put_v4l2_window32(&kp->fmt.win, &up->fmt.win);
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_VBI_OUTPUT:
-		return copy_to_user(&up->fmt.vbi, &kp->fmt.vbi,
-				    sizeof(kp->fmt.vbi)) ?  -EFAULT : 0;
+		return copy_in_user(&up->fmt.vbi, &kp->fmt.vbi,
+				    sizeof(kp->fmt.vbi)) ? -EFAULT : 0;
 	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
 	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-		return copy_to_user(&up->fmt.sliced, &kp->fmt.sliced,
-				    sizeof(kp->fmt.sliced)) ?  -EFAULT : 0;
+		return copy_in_user(&up->fmt.sliced, &kp->fmt.sliced,
+				    sizeof(kp->fmt.sliced)) ? -EFAULT : 0;
 	default:
 		return -EINVAL;
 	}
 }
 
-static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+static int put_v4l2_format32(struct v4l2_format __user *kp,
+			     struct v4l2_format32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)))
 		return -EFAULT;
 	return __put_v4l2_format32(kp, up);
 }
 
-static int put_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
+static int put_v4l2_create32(struct v4l2_create_buffers __user *kp,
+			     struct v4l2_create_buffers32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format)) ||
-	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
+	    copy_in_user(up, kp,
+			 offsetof(struct v4l2_create_buffers32, format)) ||
+	    copy_in_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
 		return -EFAULT;
 	return __put_v4l2_format32(&kp->format, &up->format);
 }
@@ -241,24 +314,27 @@ struct v4l2_standard32 {
 	__u32		     reserved[4];
 };
 
-static int get_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up)
+static int get_v4l2_standard32(struct v4l2_standard __user *kp,
+			       struct v4l2_standard32 __user *up)
 {
 	/* other fields are not set by the user, nor used by the driver */
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    get_user(kp->index, &up->index))
+	    assign_in_user(&kp->index, &up->index))
 		return -EFAULT;
 	return 0;
 }
 
-static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up)
+static int put_v4l2_standard32(struct v4l2_standard __user *kp,
+			       struct v4l2_standard32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(kp->index, &up->index) ||
-	    copy_to_user(up->id, &kp->id, sizeof(__u64)) ||
-	    copy_to_user(up->name, kp->name, sizeof(up->name)) ||
-	    copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) ||
-	    put_user(kp->framelines, &up->framelines) ||
-	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
+	    assign_in_user(&up->index, &kp->index) ||
+	    copy_in_user(&up->id, &kp->id, sizeof(up->id)) ||
+	    copy_in_user(up->name, kp->name, sizeof(up->name)) ||
+	    copy_in_user(&up->frameperiod, &kp->frameperiod,
+			 sizeof(up->frameperiod)) ||
+	    assign_in_user(&up->framelines, &kp->framelines) ||
+	    copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved)))
 		return -EFAULT;
 	return 0;
 }
@@ -298,11 +374,11 @@ struct v4l2_buffer32 {
 	__u32			reserved;
 };
 
-static int get_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32,
+static int get_v4l2_plane32(struct v4l2_plane __user *up,
+			    struct v4l2_plane32 __user *up32,
 			    enum v4l2_memory memory)
 {
-	void __user *up_pln;
-	compat_long_t p;
+	compat_ulong_t p;
 
 	if (copy_in_user(up, up32, 2 * sizeof(__u32)) ||
 	    copy_in_user(&up->data_offset, &up32->data_offset,
@@ -317,10 +393,8 @@ static int get_v4l2_plane32(struct v4l2_
 			return -EFAULT;
 		break;
 	case V4L2_MEMORY_USERPTR:
-		if (get_user(p, &up32->m.userptr))
-			return -EFAULT;
-		up_pln = compat_ptr(p);
-		if (put_user((unsigned long)up_pln, &up->m.userptr))
+		if (get_user(p, &up32->m.userptr) ||
+		    put_user((unsigned long)compat_ptr(p), &up->m.userptr))
 			return -EFAULT;
 		break;
 	case V4L2_MEMORY_DMABUF:
@@ -332,7 +406,8 @@ static int get_v4l2_plane32(struct v4l2_
 	return 0;
 }
 
-static int put_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32,
+static int put_v4l2_plane32(struct v4l2_plane __user *up,
+			    struct v4l2_plane32 __user *up32,
 			    enum v4l2_memory memory)
 {
 	unsigned long p;
@@ -356,8 +431,7 @@ static int put_v4l2_plane32(struct v4l2_
 			return -EFAULT;
 		break;
 	case V4L2_MEMORY_DMABUF:
-		if (copy_in_user(&up32->m.fd, &up->m.fd,
-				 sizeof(up->m.fd)))
+		if (copy_in_user(&up32->m.fd, &up->m.fd, sizeof(up->m.fd)))
 			return -EFAULT;
 		break;
 	}
@@ -365,37 +439,75 @@ static int put_v4l2_plane32(struct v4l2_
 	return 0;
 }
 
-static int get_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user *up)
+static int bufsize_v4l2_buffer(struct v4l2_buffer32 __user *up, u32 *size)
 {
+	u32 type;
+	u32 length;
+
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
+	    get_user(type, &up->type) ||
+	    get_user(length, &up->length))
+		return -EFAULT;
+
+	if (V4L2_TYPE_IS_MULTIPLANAR(type)) {
+		if (length > VIDEO_MAX_PLANES)
+			return -EINVAL;
+
+		/*
+		 * We don't really care if userspace decides to kill itself
+		 * by passing a very big length value
+		 */
+		*size = length * sizeof(struct v4l2_plane);
+	} else {
+		*size = 0;
+	}
+	return 0;
+}
+
+static int get_v4l2_buffer32(struct v4l2_buffer __user *kp,
+			     struct v4l2_buffer32 __user *up,
+			     void __user *aux_buf, u32 aux_space)
+{
+	u32 type;
+	u32 length;
+	enum v4l2_memory memory;
 	struct v4l2_plane32 __user *uplane32;
 	struct v4l2_plane __user *uplane;
 	compat_caddr_t p;
-	int num_planes;
 	int ret;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    get_user(kp->index, &up->index) ||
-	    get_user(kp->type, &up->type) ||
-	    get_user(kp->flags, &up->flags) ||
-	    get_user(kp->memory, &up->memory) ||
-	    get_user(kp->length, &up->length))
-		return -EFAULT;
-
-	if (V4L2_TYPE_IS_OUTPUT(kp->type))
-		if (get_user(kp->bytesused, &up->bytesused) ||
-		    get_user(kp->field, &up->field) ||
-		    get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-		    get_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec))
+	    assign_in_user(&kp->index, &up->index) ||
+	    get_user(type, &up->type) ||
+	    put_user(type, &kp->type) ||
+	    assign_in_user(&kp->flags, &up->flags) ||
+	    get_user(memory, &up->memory) ||
+	    put_user(memory, &kp->memory) ||
+	    get_user(length, &up->length) ||
+	    put_user(length, &kp->length))
+		return -EFAULT;
+
+	if (V4L2_TYPE_IS_OUTPUT(type))
+		if (assign_in_user(&kp->bytesused, &up->bytesused) ||
+		    assign_in_user(&kp->field, &up->field) ||
+		    assign_in_user(&kp->timestamp.tv_sec,
+				   &up->timestamp.tv_sec) ||
+		    assign_in_user(&kp->timestamp.tv_usec,
+				   &up->timestamp.tv_usec))
 			return -EFAULT;
 
-	if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
-		num_planes = kp->length;
+	if (V4L2_TYPE_IS_MULTIPLANAR(type)) {
+		u32 num_planes = length;
+
 		if (num_planes == 0) {
-			kp->m.planes = NULL;
-			/* num_planes == 0 is legal, e.g. when userspace doesn't
-			 * need planes array on DQBUF*/
-			return 0;
+			/*
+			 * num_planes == 0 is legal, e.g. when userspace doesn't
+			 * need planes array on DQBUF
+			 */
+			return put_user(NULL, &kp->m.planes);
 		}
+		if (num_planes > VIDEO_MAX_PLANES)
+			return -EINVAL;
 
 		if (get_user(p, &up->m.planes))
 			return -EFAULT;
@@ -405,37 +517,43 @@ static int get_v4l2_buffer32(struct v4l2
 			       num_planes * sizeof(*uplane32)))
 			return -EFAULT;
 
-		/* We don't really care if userspace decides to kill itself
-		 * by passing a very big num_planes value */
-		uplane = compat_alloc_user_space(num_planes * sizeof(*uplane));
-		kp->m.planes = (__force struct v4l2_plane *)uplane;
+		/*
+		 * We don't really care if userspace decides to kill itself
+		 * by passing a very big num_planes value
+		 */
+		if (aux_space < num_planes * sizeof(*uplane))
+			return -EFAULT;
+
+		uplane = aux_buf;
+		if (put_user((__force struct v4l2_plane *)uplane,
+			     &kp->m.planes))
+			return -EFAULT;
 
-		while (--num_planes >= 0) {
-			ret = get_v4l2_plane32(uplane, uplane32, kp->memory);
+		while (num_planes--) {
+			ret = get_v4l2_plane32(uplane, uplane32, memory);
 			if (ret)
 				return ret;
-			++uplane;
-			++uplane32;
+			uplane++;
+			uplane32++;
 		}
 	} else {
-		switch (kp->memory) {
+		switch (memory) {
 		case V4L2_MEMORY_MMAP:
 		case V4L2_MEMORY_OVERLAY:
-			if (get_user(kp->m.offset, &up->m.offset))
+			if (assign_in_user(&kp->m.offset, &up->m.offset))
 				return -EFAULT;
 			break;
-		case V4L2_MEMORY_USERPTR:
-			{
-				compat_long_t tmp;
+		case V4L2_MEMORY_USERPTR: {
+			compat_ulong_t userptr;
 
-				if (get_user(tmp, &up->m.userptr))
-					return -EFAULT;
-
-				kp->m.userptr = (unsigned long)compat_ptr(tmp);
-			}
+			if (get_user(userptr, &up->m.userptr) ||
+			    put_user((unsigned long)compat_ptr(userptr),
+				     &kp->m.userptr))
+				return -EFAULT;
 			break;
+		}
 		case V4L2_MEMORY_DMABUF:
-			if (get_user(kp->m.fd, &up->m.fd))
+			if (assign_in_user(&kp->m.fd, &up->m.fd))
 				return -EFAULT;
 			break;
 		}
@@ -444,62 +562,70 @@ static int get_v4l2_buffer32(struct v4l2
 	return 0;
 }
 
-static int put_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user *up)
+static int put_v4l2_buffer32(struct v4l2_buffer __user *kp,
+			     struct v4l2_buffer32 __user *up)
 {
+	u32 type;
+	u32 length;
+	enum v4l2_memory memory;
 	struct v4l2_plane32 __user *uplane32;
 	struct v4l2_plane __user *uplane;
 	compat_caddr_t p;
-	int num_planes;
 	int ret;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(kp->index, &up->index) ||
-	    put_user(kp->type, &up->type) ||
-	    put_user(kp->flags, &up->flags) ||
-	    put_user(kp->memory, &up->memory))
-		return -EFAULT;
-
-	if (put_user(kp->bytesused, &up->bytesused) ||
-	    put_user(kp->field, &up->field) ||
-	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-	    put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) ||
-	    copy_to_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) ||
-	    put_user(kp->sequence, &up->sequence) ||
-	    put_user(kp->reserved2, &up->reserved2) ||
-	    put_user(kp->reserved, &up->reserved) ||
-	    put_user(kp->length, &up->length))
+	    assign_in_user(&up->index, &kp->index) ||
+	    get_user(type, &kp->type) ||
+	    put_user(type, &up->type) ||
+	    assign_in_user(&up->flags, &kp->flags) ||
+	    get_user(memory, &kp->memory) ||
+	    put_user(memory, &up->memory))
+		return -EFAULT;
+
+	if (assign_in_user(&up->bytesused, &kp->bytesused) ||
+	    assign_in_user(&up->field, &kp->field) ||
+	    assign_in_user(&up->timestamp.tv_sec, &kp->timestamp.tv_sec) ||
+	    assign_in_user(&up->timestamp.tv_usec, &kp->timestamp.tv_usec) ||
+	    copy_in_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) ||
+	    assign_in_user(&up->sequence, &kp->sequence) ||
+	    assign_in_user(&up->reserved2, &kp->reserved2) ||
+	    assign_in_user(&up->reserved, &kp->reserved) ||
+	    get_user(length, &kp->length) ||
+	    put_user(length, &up->length))
 		return -EFAULT;
 
-	if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
-		num_planes = kp->length;
+	if (V4L2_TYPE_IS_MULTIPLANAR(type)) {
+		u32 num_planes = length;
+
 		if (num_planes == 0)
 			return 0;
 
-		uplane = (__force struct v4l2_plane __user *)kp->m.planes;
+		if (get_user(uplane, ((__force struct v4l2_plane __user **)&kp->m.planes)))
+			return -EFAULT;
 		if (get_user(p, &up->m.planes))
 			return -EFAULT;
 		uplane32 = compat_ptr(p);
 
-		while (--num_planes >= 0) {
-			ret = put_v4l2_plane32(uplane, uplane32, kp->memory);
+		while (num_planes--) {
+			ret = put_v4l2_plane32(uplane, uplane32, memory);
 			if (ret)
 				return ret;
 			++uplane;
 			++uplane32;
 		}
 	} else {
-		switch (kp->memory) {
+		switch (memory) {
 		case V4L2_MEMORY_MMAP:
 		case V4L2_MEMORY_OVERLAY:
-			if (put_user(kp->m.offset, &up->m.offset))
+			if (assign_in_user(&up->m.offset, &kp->m.offset))
 				return -EFAULT;
 			break;
 		case V4L2_MEMORY_USERPTR:
-			if (put_user(kp->m.userptr, &up->m.userptr))
+			if (assign_in_user(&up->m.userptr, &kp->m.userptr))
 				return -EFAULT;
 			break;
 		case V4L2_MEMORY_DMABUF:
-			if (put_user(kp->m.fd, &up->m.fd))
+			if (assign_in_user(&up->m.fd, &kp->m.fd))
 				return -EFAULT;
 			break;
 		}
@@ -511,7 +637,7 @@ static int put_v4l2_buffer32(struct v4l2
 struct v4l2_framebuffer32 {
 	__u32			capability;
 	__u32			flags;
-	compat_caddr_t 		base;
+	compat_caddr_t		base;
 	struct {
 		__u32		width;
 		__u32		height;
@@ -524,29 +650,32 @@ struct v4l2_framebuffer32 {
 	} fmt;
 };
 
-static int get_v4l2_framebuffer32(struct v4l2_framebuffer *kp, struct v4l2_framebuffer32 __user *up)
+static int get_v4l2_framebuffer32(struct v4l2_framebuffer __user *kp,
+				  struct v4l2_framebuffer32 __user *up)
 {
-	u32 tmp;
+	compat_caddr_t tmp;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    get_user(tmp, &up->base) ||
-	    get_user(kp->capability, &up->capability) ||
-	    get_user(kp->flags, &up->flags) ||
-	    copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt)))
+	    put_user((__force void *)compat_ptr(tmp), &kp->base) ||
+	    assign_in_user(&kp->capability, &up->capability) ||
+	    assign_in_user(&kp->flags, &up->flags) ||
+	    copy_in_user(&kp->fmt, &up->fmt, sizeof(kp->fmt)))
 		return -EFAULT;
-	kp->base = (__force void *)compat_ptr(tmp);
 	return 0;
 }
 
-static int put_v4l2_framebuffer32(struct v4l2_framebuffer *kp, struct v4l2_framebuffer32 __user *up)
+static int put_v4l2_framebuffer32(struct v4l2_framebuffer __user *kp,
+				  struct v4l2_framebuffer32 __user *up)
 {
-	u32 tmp = (u32)((unsigned long)kp->base);
+	void *base;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(tmp, &up->base) ||
-	    put_user(kp->capability, &up->capability) ||
-	    put_user(kp->flags, &up->flags) ||
-	    copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt)))
+	    get_user(base, &kp->base) ||
+	    put_user(ptr_to_compat(base), &up->base) ||
+	    assign_in_user(&up->capability, &kp->capability) ||
+	    assign_in_user(&up->flags, &kp->flags) ||
+	    copy_in_user(&up->fmt, &kp->fmt, sizeof(kp->fmt)))
 		return -EFAULT;
 	return 0;
 }
@@ -559,21 +688,26 @@ struct v4l2_input32 {
 	__u32        tuner;             /*  Associated tuner */
 	v4l2_std_id  std;
 	__u32	     status;
-	__u32	     reserved[4];
-} __attribute__ ((packed));
+	__u32	     capabilities;
+	__u32	     reserved[3];
+};
 
-/* The 64-bit v4l2_input struct has extra padding at the end of the struct.
-   Otherwise it is identical to the 32-bit version. */
-static inline int get_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up)
+/*
+ * The 64-bit v4l2_input struct has extra padding at the end of the struct.
+ * Otherwise it is identical to the 32-bit version.
+ */
+static inline int get_v4l2_input32(struct v4l2_input __user *kp,
+				   struct v4l2_input32 __user *up)
 {
-	if (copy_from_user(kp, up, sizeof(*up)))
+	if (copy_in_user(kp, up, sizeof(*up)))
 		return -EFAULT;
 	return 0;
 }
 
-static inline int put_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up)
+static inline int put_v4l2_input32(struct v4l2_input __user *kp,
+				   struct v4l2_input32 __user *up)
 {
-	if (copy_to_user(up, kp, sizeof(*up)))
+	if (copy_in_user(up, kp, sizeof(*up)))
 		return -EFAULT;
 	return 0;
 }
@@ -627,40 +761,64 @@ static inline bool ctrl_is_pointer(struc
 		(qec.flags & V4L2_CTRL_FLAG_HAS_PAYLOAD);
 }
 
+static int bufsize_v4l2_ext_controls(struct v4l2_ext_controls32 __user *up,
+				     u32 *size)
+{
+	u32 count;
+
+	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
+	    get_user(count, &up->count))
+		return -EFAULT;
+	if (count > V4L2_CID_MAX_CTRLS)
+		return -EINVAL;
+	*size = count * sizeof(struct v4l2_ext_control);
+	return 0;
+}
+
 static int get_v4l2_ext_controls32(struct file *file,
-				   struct v4l2_ext_controls *kp,
-				   struct v4l2_ext_controls32 __user *up)
+				   struct v4l2_ext_controls __user *kp,
+				   struct v4l2_ext_controls32 __user *up,
+				   void __user *aux_buf, u32 aux_space)
 {
 	struct v4l2_ext_control32 __user *ucontrols;
 	struct v4l2_ext_control __user *kcontrols;
-	int n;
+	u32 count;
+	u32 n;
 	compat_caddr_t p;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    get_user(kp->ctrl_class, &up->ctrl_class) ||
-	    get_user(kp->count, &up->count) ||
-	    get_user(kp->error_idx, &up->error_idx) ||
-	    copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
-		return -EFAULT;
-	n = kp->count;
-	if (n == 0) {
-		kp->controls = NULL;
-		return 0;
-	}
+	    assign_in_user(&kp->ctrl_class, &up->ctrl_class) ||
+	    get_user(count, &up->count) ||
+	    put_user(count, &kp->count) ||
+	    assign_in_user(&kp->error_idx, &up->error_idx) ||
+	    copy_in_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
+		return -EFAULT;
+
+	if (count == 0)
+		return put_user(NULL, &kp->controls);
+	if (count > V4L2_CID_MAX_CTRLS)
+		return -EINVAL;
 	if (get_user(p, &up->controls))
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
-	if (!access_ok(VERIFY_READ, ucontrols, n * sizeof(*ucontrols)))
+	if (!access_ok(VERIFY_READ, ucontrols, count * sizeof(*ucontrols)))
+		return -EFAULT;
+	if (aux_space < count * sizeof(*kcontrols))
 		return -EFAULT;
-	kcontrols = compat_alloc_user_space(n * sizeof(*kcontrols));
-	kp->controls = (__force struct v4l2_ext_control *)kcontrols;
-	while (--n >= 0) {
+	kcontrols = aux_buf;
+	if (put_user((__force struct v4l2_ext_control *)kcontrols,
+		     &kp->controls))
+		return -EFAULT;
+
+	for (n = 0; n < count; n++) {
 		u32 id;
 
 		if (copy_in_user(kcontrols, ucontrols, sizeof(*ucontrols)))
 			return -EFAULT;
+
 		if (get_user(id, &kcontrols->id))
 			return -EFAULT;
+
 		if (ctrl_is_pointer(file, id)) {
 			void __user *s;
 
@@ -677,43 +835,54 @@ static int get_v4l2_ext_controls32(struc
 }
 
 static int put_v4l2_ext_controls32(struct file *file,
-				   struct v4l2_ext_controls *kp,
+				   struct v4l2_ext_controls __user *kp,
 				   struct v4l2_ext_controls32 __user *up)
 {
 	struct v4l2_ext_control32 __user *ucontrols;
-	struct v4l2_ext_control __user *kcontrols =
-		(__force struct v4l2_ext_control __user *)kp->controls;
-	int n = kp->count;
+	struct v4l2_ext_control __user *kcontrols;
+	u32 count;
+	u32 n;
 	compat_caddr_t p;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(kp->ctrl_class, &up->ctrl_class) ||
-	    put_user(kp->count, &up->count) ||
-	    put_user(kp->error_idx, &up->error_idx) ||
-	    copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
+	    assign_in_user(&up->ctrl_class, &kp->ctrl_class) ||
+	    get_user(count, &kp->count) ||
+	    put_user(count, &up->count) ||
+	    assign_in_user(&up->error_idx, &kp->error_idx) ||
+	    copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved)) ||
+	    get_user(kcontrols, &kp->controls))
 		return -EFAULT;
-	if (!kp->count)
-		return 0;
 
+	if (!count)
+		return 0;
 	if (get_user(p, &up->controls))
 		return -EFAULT;
 	ucontrols = compat_ptr(p);
-	if (!access_ok(VERIFY_WRITE, ucontrols, n * sizeof(*ucontrols)))
+	if (!access_ok(VERIFY_WRITE, ucontrols, count * sizeof(*ucontrols)))
 		return -EFAULT;
 
-	while (--n >= 0) {
-		unsigned size = sizeof(*ucontrols);
+	for (n = 0; n < count; n++) {
+		unsigned int size = sizeof(*ucontrols);
 		u32 id;
 
-		if (get_user(id, &kcontrols->id))
+		if (get_user(id, &kcontrols->id) ||
+		    put_user(id, &ucontrols->id) ||
+		    assign_in_user(&ucontrols->size, &kcontrols->size) ||
+		    copy_in_user(&ucontrols->reserved2, &kcontrols->reserved2,
+				 sizeof(ucontrols->reserved2)))
 			return -EFAULT;
-		/* Do not modify the pointer when copying a pointer control.
-		   The contents of the pointer was changed, not the pointer
-		   itself. */
+
+		/*
+		 * Do not modify the pointer when copying a pointer control.
+		 * The contents of the pointer was changed, not the pointer
+		 * itself.
+		 */
 		if (ctrl_is_pointer(file, id))
 			size -= sizeof(ucontrols->value64);
+
 		if (copy_in_user(ucontrols, kcontrols, size))
 			return -EFAULT;
+
 		ucontrols++;
 		kcontrols++;
 	}
@@ -732,17 +901,18 @@ struct v4l2_event32 {
 	__u32				reserved[8];
 };
 
-static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up)
+static int put_v4l2_event32(struct v4l2_event __user *kp,
+			    struct v4l2_event32 __user *up)
 {
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(kp->type, &up->type) ||
-	    copy_to_user(&up->u, &kp->u, sizeof(kp->u)) ||
-	    put_user(kp->pending, &up->pending) ||
-	    put_user(kp->sequence, &up->sequence) ||
-	    put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
-	    put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) ||
-	    put_user(kp->id, &up->id) ||
-	    copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
+	    assign_in_user(&up->type, &kp->type) ||
+	    copy_in_user(&up->u, &kp->u, sizeof(kp->u)) ||
+	    assign_in_user(&up->pending, &kp->pending) ||
+	    assign_in_user(&up->sequence, &kp->sequence) ||
+	    assign_in_user(&up->timestamp.tv_sec, &kp->timestamp.tv_sec) ||
+	    assign_in_user(&up->timestamp.tv_nsec, &kp->timestamp.tv_nsec) ||
+	    assign_in_user(&up->id, &kp->id) ||
+	    copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved)))
 		return -EFAULT;
 	return 0;
 }
@@ -755,31 +925,34 @@ struct v4l2_edid32 {
 	compat_caddr_t edid;
 };
 
-static int get_v4l2_edid32(struct v4l2_edid *kp, struct v4l2_edid32 __user *up)
+static int get_v4l2_edid32(struct v4l2_edid __user *kp,
+			   struct v4l2_edid32 __user *up)
 {
-	u32 tmp;
+	compat_uptr_t tmp;
 
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
-	    get_user(kp->pad, &up->pad) ||
-	    get_user(kp->start_block, &up->start_block) ||
-	    get_user(kp->blocks, &up->blocks) ||
+	    assign_in_user(&kp->pad, &up->pad) ||
+	    assign_in_user(&kp->start_block, &up->start_block) ||
+	    assign_in_user(&kp->blocks, &up->blocks) ||
 	    get_user(tmp, &up->edid) ||
-	    copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
+	    put_user(compat_ptr(tmp), &kp->edid) ||
+	    copy_in_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
 		return -EFAULT;
-	kp->edid = (__force u8 *)compat_ptr(tmp);
 	return 0;
 }
 
-static int put_v4l2_edid32(struct v4l2_edid *kp, struct v4l2_edid32 __user *up)
+static int put_v4l2_edid32(struct v4l2_edid __user *kp,
+			   struct v4l2_edid32 __user *up)
 {
-	u32 tmp = (u32)((unsigned long)kp->edid);
+	void *edid;
 
 	if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
-	    put_user(kp->pad, &up->pad) ||
-	    put_user(kp->start_block, &up->start_block) ||
-	    put_user(kp->blocks, &up->blocks) ||
-	    put_user(tmp, &up->edid) ||
-	    copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved)))
+	    assign_in_user(&up->pad, &kp->pad) ||
+	    assign_in_user(&up->start_block, &kp->start_block) ||
+	    assign_in_user(&up->blocks, &kp->blocks) ||
+	    get_user(edid, &kp->edid) ||
+	    put_user(ptr_to_compat(edid), &up->edid) ||
+	    copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved)))
 		return -EFAULT;
 	return 0;
 }
@@ -796,7 +969,7 @@ static int put_v4l2_edid32(struct v4l2_e
 #define VIDIOC_ENUMINPUT32	_IOWR('V', 26, struct v4l2_input32)
 #define VIDIOC_G_EDID32		_IOWR('V', 40, struct v4l2_edid32)
 #define VIDIOC_S_EDID32		_IOWR('V', 41, struct v4l2_edid32)
-#define VIDIOC_TRY_FMT32      	_IOWR('V', 64, struct v4l2_format32)
+#define VIDIOC_TRY_FMT32	_IOWR('V', 64, struct v4l2_format32)
 #define VIDIOC_G_EXT_CTRLS32    _IOWR('V', 71, struct v4l2_ext_controls32)
 #define VIDIOC_S_EXT_CTRLS32    _IOWR('V', 72, struct v4l2_ext_controls32)
 #define VIDIOC_TRY_EXT_CTRLS32  _IOWR('V', 73, struct v4l2_ext_controls32)
@@ -812,22 +985,23 @@ static int put_v4l2_edid32(struct v4l2_e
 #define VIDIOC_G_OUTPUT32	_IOR ('V', 46, s32)
 #define VIDIOC_S_OUTPUT32	_IOWR('V', 47, s32)
 
+static int alloc_userspace(unsigned int size, u32 aux_space,
+			   void __user **up_native)
+{
+	*up_native = compat_alloc_user_space(size + aux_space);
+	if (!*up_native)
+		return -ENOMEM;
+	if (clear_user(*up_native, size))
+		return -EFAULT;
+	return 0;
+}
+
 static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	union {
-		struct v4l2_format v2f;
-		struct v4l2_buffer v2b;
-		struct v4l2_framebuffer v2fb;
-		struct v4l2_input v2i;
-		struct v4l2_standard v2s;
-		struct v4l2_ext_controls v2ecs;
-		struct v4l2_event v2ev;
-		struct v4l2_create_buffers v2crt;
-		struct v4l2_edid v2edid;
-		unsigned long vx;
-		int vi;
-	} karg;
 	void __user *up = compat_ptr(arg);
+	void __user *up_native = NULL;
+	void __user *aux_buf;
+	u32 aux_space;
 	int compatible_arg = 1;
 	long err = 0;
 
@@ -866,30 +1040,52 @@ static long do_video_ioctl(struct file *
 	case VIDIOC_STREAMOFF:
 	case VIDIOC_S_INPUT:
 	case VIDIOC_S_OUTPUT:
-		err = get_user(karg.vi, (s32 __user *)up);
+		err = alloc_userspace(sizeof(unsigned int), 0, &up_native);
+		if (!err && assign_in_user((unsigned int __user *)up_native,
+					   (compat_uint_t __user *)up))
+			err = -EFAULT;
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_G_INPUT:
 	case VIDIOC_G_OUTPUT:
+		err = alloc_userspace(sizeof(unsigned int), 0, &up_native);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_G_EDID:
 	case VIDIOC_S_EDID:
-		err = get_v4l2_edid32(&karg.v2edid, up);
+		err = alloc_userspace(sizeof(struct v4l2_edid), 0, &up_native);
+		if (!err)
+			err = get_v4l2_edid32(up_native, up);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_G_FMT:
 	case VIDIOC_S_FMT:
 	case VIDIOC_TRY_FMT:
-		err = get_v4l2_format32(&karg.v2f, up);
+		err = bufsize_v4l2_format(up, &aux_space);
+		if (!err)
+			err = alloc_userspace(sizeof(struct v4l2_format),
+					      aux_space, &up_native);
+		if (!err) {
+			aux_buf = up_native + sizeof(struct v4l2_format);
+			err = get_v4l2_format32(up_native, up,
+						aux_buf, aux_space);
+		}
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_CREATE_BUFS:
-		err = get_v4l2_create32(&karg.v2crt, up);
+		err = bufsize_v4l2_create(up, &aux_space);
+		if (!err)
+			err = alloc_userspace(sizeof(struct v4l2_create_buffers),
+					      aux_space, &up_native);
+		if (!err) {
+			aux_buf = up_native + sizeof(struct v4l2_create_buffers);
+			err = get_v4l2_create32(up_native, up,
+						aux_buf, aux_space);
+		}
 		compatible_arg = 0;
 		break;
 
@@ -897,36 +1093,63 @@ static long do_video_ioctl(struct file *
 	case VIDIOC_QUERYBUF:
 	case VIDIOC_QBUF:
 	case VIDIOC_DQBUF:
-		err = get_v4l2_buffer32(&karg.v2b, up);
+		err = bufsize_v4l2_buffer(up, &aux_space);
+		if (!err)
+			err = alloc_userspace(sizeof(struct v4l2_buffer),
+					      aux_space, &up_native);
+		if (!err) {
+			aux_buf = up_native + sizeof(struct v4l2_buffer);
+			err = get_v4l2_buffer32(up_native, up,
+						aux_buf, aux_space);
+		}
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_S_FBUF:
-		err = get_v4l2_framebuffer32(&karg.v2fb, up);
+		err = alloc_userspace(sizeof(struct v4l2_framebuffer), 0,
+				      &up_native);
+		if (!err)
+			err = get_v4l2_framebuffer32(up_native, up);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_G_FBUF:
+		err = alloc_userspace(sizeof(struct v4l2_framebuffer), 0,
+				      &up_native);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_ENUMSTD:
-		err = get_v4l2_standard32(&karg.v2s, up);
+		err = alloc_userspace(sizeof(struct v4l2_standard), 0,
+				      &up_native);
+		if (!err)
+			err = get_v4l2_standard32(up_native, up);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_ENUMINPUT:
-		err = get_v4l2_input32(&karg.v2i, up);
+		err = alloc_userspace(sizeof(struct v4l2_input), 0, &up_native);
+		if (!err)
+			err = get_v4l2_input32(up_native, up);
 		compatible_arg = 0;
 		break;
 
 	case VIDIOC_G_EXT_CTRLS:
 	case VIDIOC_S_EXT_CTRLS:
 	case VIDIOC_TRY_EXT_CTRLS:
-		err = get_v4l2_ext_controls32(file, &karg.v2ecs, up);
+		err = bufsize_v4l2_ext_controls(up, &aux_space);
+		if (!err)
+			err = alloc_userspace(sizeof(struct v4l2_ext_controls),
+					      aux_space, &up_native);
+		if (!err) {
+			aux_buf = up_native + sizeof(struct v4l2_ext_controls);
+			err = get_v4l2_ext_controls32(file, up_native, up,
+						      aux_buf, aux_space);
+		}
 		compatible_arg = 0;
 		break;
 	case VIDIOC_DQEVENT:
+		err = alloc_userspace(sizeof(struct v4l2_event), 0, &up_native);
 		compatible_arg = 0;
 		break;
 	}
@@ -935,25 +1158,26 @@ static long do_video_ioctl(struct file *
 
 	if (compatible_arg)
 		err = native_ioctl(file, cmd, (unsigned long)up);
-	else {
-		mm_segment_t old_fs = get_fs();
-
-		set_fs(KERNEL_DS);
-		err = native_ioctl(file, cmd, (unsigned long)&karg);
-		set_fs(old_fs);
-	}
+	else
+		err = native_ioctl(file, cmd, (unsigned long)up_native);
 
 	if (err == -ENOTTY)
 		return err;
 
-	/* Special case: even after an error we need to put the
-	   results back for these ioctls since the error_idx will
-	   contain information on which control failed. */
+	/*
+	 * Special case: even after an error we need to put the
+	 * results back for these ioctls since the error_idx will
+	 * contain information on which control failed.
+	 */
 	switch (cmd) {
 	case VIDIOC_G_EXT_CTRLS:
 	case VIDIOC_S_EXT_CTRLS:
 	case VIDIOC_TRY_EXT_CTRLS:
-		if (put_v4l2_ext_controls32(file, &karg.v2ecs, up))
+		if (put_v4l2_ext_controls32(file, up_native, up))
+			err = -EFAULT;
+		break;
+	case VIDIOC_S_EDID:
+		if (put_v4l2_edid32(up_native, up))
 			err = -EFAULT;
 		break;
 	}
@@ -965,45 +1189,46 @@ static long do_video_ioctl(struct file *
 	case VIDIOC_S_OUTPUT:
 	case VIDIOC_G_INPUT:
 	case VIDIOC_G_OUTPUT:
-		err = put_user(((s32)karg.vi), (s32 __user *)up);
+		if (assign_in_user((compat_uint_t __user *)up,
+				   ((unsigned int __user *)up_native)))
+			err = -EFAULT;
 		break;
 
 	case VIDIOC_G_FBUF:
-		err = put_v4l2_framebuffer32(&karg.v2fb, up);
+		err = put_v4l2_framebuffer32(up_native, up);
 		break;
 
 	case VIDIOC_DQEVENT:
-		err = put_v4l2_event32(&karg.v2ev, up);
+		err = put_v4l2_event32(up_native, up);
 		break;
 
 	case VIDIOC_G_EDID:
-	case VIDIOC_S_EDID:
-		err = put_v4l2_edid32(&karg.v2edid, up);
+		err = put_v4l2_edid32(up_native, up);
 		break;
 
 	case VIDIOC_G_FMT:
 	case VIDIOC_S_FMT:
 	case VIDIOC_TRY_FMT:
-		err = put_v4l2_format32(&karg.v2f, up);
+		err = put_v4l2_format32(up_native, up);
 		break;
 
 	case VIDIOC_CREATE_BUFS:
-		err = put_v4l2_create32(&karg.v2crt, up);
+		err = put_v4l2_create32(up_native, up);
 		break;
 
 	case VIDIOC_PREPARE_BUF:
 	case VIDIOC_QUERYBUF:
 	case VIDIOC_QBUF:
 	case VIDIOC_DQBUF:
-		err = put_v4l2_buffer32(&karg.v2b, up);
+		err = put_v4l2_buffer32(up_native, up);
 		break;
 
 	case VIDIOC_ENUMSTD:
-		err = put_v4l2_standard32(&karg.v2s, up);
+		err = put_v4l2_standard32(up_native, up);
 		break;
 
 	case VIDIOC_ENUMINPUT:
-		err = put_v4l2_input32(&karg.v2i, up);
+		err = put_v4l2_input32(up_native, up);
 		break;
 	}
 	return err;

[PATCH 3.18 71/93] media: v4l2-ctrls: fix sparse warning

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

The warning is simple:

drivers/media/v4l2-core/v4l2-ctrls.c:1685:15: warning: incorrect type in assignment (different address spaces)

but the fix isn't.

The core problem was that the conversion from user to kernelspace was
done at too low a level and that needed to be moved up. That made it possible
to drop pointers to v4l2_ext_control from set_ctrl and validate_new and
clean up this sparse warning because those functions now always operate
on kernelspace pointers.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-ctrls.c |   87 ++++++++++++++++++++---------------
 1 file changed, 52 insertions(+), 35 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -1668,10 +1668,8 @@ static int check_range(enum v4l2_ctrl_ty
 }
 
 /* Validate a new control */
-static int validate_new(const struct v4l2_ctrl *ctrl,
-			struct v4l2_ext_control *c)
+static int validate_new(const struct v4l2_ctrl *ctrl, union v4l2_ctrl_ptr p_new)
 {
-	union v4l2_ctrl_ptr ptr;
 	unsigned idx;
 	int err = 0;
 
@@ -1684,19 +1682,14 @@ static int validate_new(const struct v4l
 		case V4L2_CTRL_TYPE_BOOLEAN:
 		case V4L2_CTRL_TYPE_BUTTON:
 		case V4L2_CTRL_TYPE_CTRL_CLASS:
-			ptr.p_s32 = &c->value;
-			return ctrl->type_ops->validate(ctrl, 0, ptr);
-
 		case V4L2_CTRL_TYPE_INTEGER64:
-			ptr.p_s64 = &c->value64;
-			return ctrl->type_ops->validate(ctrl, 0, ptr);
+			return ctrl->type_ops->validate(ctrl, 0, p_new);
 		default:
 			break;
 		}
 	}
-	ptr.p = c->ptr;
-	for (idx = 0; !err && idx < c->size / ctrl->elem_size; idx++)
-		err = ctrl->type_ops->validate(ctrl, idx, ptr);
+	for (idx = 0; !err && idx < ctrl->elems; idx++)
+		err = ctrl->type_ops->validate(ctrl, idx, p_new);
 	return err;
 }
 
@@ -3020,6 +3013,7 @@ static int validate_ctrls(struct v4l2_ex
 	cs->error_idx = cs->count;
 	for (i = 0; i < cs->count; i++) {
 		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+		union v4l2_ctrl_ptr p_new;
 
 		cs->error_idx = i;
 
@@ -3033,7 +3027,17 @@ static int validate_ctrls(struct v4l2_ex
 		   best-effort to avoid that. */
 		if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
 			return -EBUSY;
-		ret = validate_new(ctrl, &cs->controls[i]);
+		/*
+		 * Skip validation for now if the payload needs to be copied
+		 * from userspace into kernelspace. We'll validate those later.
+		 */
+		if (ctrl->is_ptr)
+			continue;
+		if (ctrl->type == V4L2_CTRL_TYPE_INTEGER64)
+			p_new.p_s64 = &cs->controls[i].value64;
+		else
+			p_new.p_s32 = &cs->controls[i].value;
+		ret = validate_new(ctrl, p_new);
 		if (ret)
 			return ret;
 	}
@@ -3128,7 +3132,11 @@ static int try_set_ext_ctrls(struct v4l2
 		/* Copy the new caller-supplied control values.
 		   user_to_new() sets 'is_new' to 1. */
 		do {
-			ret = user_to_new(cs->controls + idx, helpers[idx].ctrl);
+			struct v4l2_ctrl *ctrl = helpers[idx].ctrl;
+
+			ret = user_to_new(cs->controls + idx, ctrl);
+			if (!ret && ctrl->is_ptr)
+				ret = validate_new(ctrl, ctrl->p_new);
 			idx = helpers[idx].next;
 		} while (!ret && idx);
 
@@ -3178,10 +3186,10 @@ int v4l2_subdev_s_ext_ctrls(struct v4l2_
 EXPORT_SYMBOL(v4l2_subdev_s_ext_ctrls);
 
 /* Helper function for VIDIOC_S_CTRL compatibility */
-static int set_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl,
-		    struct v4l2_ext_control *c, u32 ch_flags)
+static int set_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, u32 ch_flags)
 {
 	struct v4l2_ctrl *master = ctrl->cluster[0];
+	int ret;
 	int i;
 
 	/* Reset the 'is_new' flags of the cluster */
@@ -3189,8 +3197,9 @@ static int set_ctrl(struct v4l2_fh *fh,
 		if (master->cluster[i])
 			master->cluster[i]->is_new = 0;
 
-	if (c)
-		user_to_new(c, ctrl);
+	ret = validate_new(ctrl, ctrl->p_new);
+	if (ret)
+		return ret;
 
 	/* For autoclusters with volatiles that are switched from auto to
 	   manual mode we have to update the current volatile values since
@@ -3207,15 +3216,14 @@ static int set_ctrl(struct v4l2_fh *fh,
 static int set_ctrl_lock(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl,
 			 struct v4l2_ext_control *c)
 {
-	int ret = validate_new(ctrl, c);
+	int ret;
 
-	if (!ret) {
-		v4l2_ctrl_lock(ctrl);
-		ret = set_ctrl(fh, ctrl, c, 0);
-		if (!ret)
-			cur_to_user(c, ctrl);
-		v4l2_ctrl_unlock(ctrl);
-	}
+	v4l2_ctrl_lock(ctrl);
+	user_to_new(c, ctrl);
+	ret = set_ctrl(fh, ctrl, 0);
+	if (!ret)
+		cur_to_user(c, ctrl);
+	v4l2_ctrl_unlock(ctrl);
 	return ret;
 }
 
@@ -3223,7 +3231,7 @@ int v4l2_s_ctrl(struct v4l2_fh *fh, stru
 					struct v4l2_control *control)
 {
 	struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id);
-	struct v4l2_ext_control c;
+	struct v4l2_ext_control c = { control->id };
 	int ret;
 
 	if (ctrl == NULL || !ctrl->is_int)
@@ -3252,7 +3260,7 @@ int __v4l2_ctrl_s_ctrl(struct v4l2_ctrl
 	/* It's a driver bug if this happens. */
 	WARN_ON(!ctrl->is_int);
 	ctrl->val = val;
-	return set_ctrl(NULL, ctrl, NULL, 0);
+	return set_ctrl(NULL, ctrl, 0);
 }
 EXPORT_SYMBOL(__v4l2_ctrl_s_ctrl);
 
@@ -3263,7 +3271,7 @@ int __v4l2_ctrl_s_ctrl_int64(struct v4l2
 	/* It's a driver bug if this happens. */
 	WARN_ON(ctrl->is_ptr || ctrl->type != V4L2_CTRL_TYPE_INTEGER64);
 	*ctrl->p_new.p_s64 = val;
-	return set_ctrl(NULL, ctrl, NULL, 0);
+	return set_ctrl(NULL, ctrl, 0);
 }
 EXPORT_SYMBOL(__v4l2_ctrl_s_ctrl_int64);
 
@@ -3274,7 +3282,7 @@ int __v4l2_ctrl_s_ctrl_string(struct v4l
 	/* It's a driver bug if this happens. */
 	WARN_ON(ctrl->type != V4L2_CTRL_TYPE_STRING);
 	strlcpy(ctrl->p_new.p_char, s, ctrl->maximum + 1);
-	return set_ctrl(NULL, ctrl, NULL, 0);
+	return set_ctrl(NULL, ctrl, 0);
 }
 EXPORT_SYMBOL(__v4l2_ctrl_s_ctrl_string);
 
@@ -3297,8 +3305,8 @@ EXPORT_SYMBOL(v4l2_ctrl_notify);
 int __v4l2_ctrl_modify_range(struct v4l2_ctrl *ctrl,
 			s64 min, s64 max, u64 step, s64 def)
 {
+	bool changed;
 	int ret;
-	struct v4l2_ext_control c;
 
 	lockdep_assert_held(ctrl->handler->lock);
 
@@ -3325,11 +3333,20 @@ int __v4l2_ctrl_modify_range(struct v4l2
 	ctrl->maximum = max;
 	ctrl->step = step;
 	ctrl->default_value = def;
-	c.value = *ctrl->p_cur.p_s32;
-	if (validate_new(ctrl, &c))
-		c.value = def;
-	if (c.value != *ctrl->p_cur.p_s32)
-		ret = set_ctrl(NULL, ctrl, &c, V4L2_EVENT_CTRL_CH_RANGE);
+	cur_to_new(ctrl);
+	if (validate_new(ctrl, ctrl->p_new)) {
+		if (ctrl->type == V4L2_CTRL_TYPE_INTEGER64)
+			*ctrl->p_new.p_s64 = def;
+		else
+			*ctrl->p_new.p_s32 = def;
+	}
+
+	if (ctrl->type == V4L2_CTRL_TYPE_INTEGER64)
+		changed = *ctrl->p_new.p_s64 != *ctrl->p_cur.p_s64;
+	else
+		changed = *ctrl->p_new.p_s32 != *ctrl->p_cur.p_s32;
+	if (changed)
+		ret = set_ctrl(NULL, ctrl, V4L2_EVENT_CTRL_CH_RANGE);
 	else
 		send_event(NULL, ctrl, V4L2_EVENT_CTRL_CH_RANGE);
 	return ret;

[PATCH 3.18 72/93] media: media/v4l2-ctrls: volatiles should not generate CH_VALUE

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ricardo Ribalda <ricardo.ribalda@gmail.com>

Volatile controls should not generate CH_VALUE events.

Set has_changed to false to prevent this happening.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-ctrls.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -1619,6 +1619,15 @@ static int cluster_changed(struct v4l2_c
 
 		if (ctrl == NULL)
 			continue;
+		/*
+		 * Set has_changed to false to avoid generating
+		 * the event V4L2_EVENT_CTRL_CH_VALUE
+		 */
+		if (ctrl->flags & V4L2_CTRL_FLAG_VOLATILE) {
+			ctrl->has_changed = false;
+			continue;
+		}
+
 		for (idx = 0; !ctrl_changed && idx < ctrl->elems; idx++)
 			ctrl_changed = !ctrl->type_ops->equal(ctrl, idx,
 				ctrl->p_cur, ctrl->p_new);

[PATCH 3.18 73/93] media: v4l2-compat-ioctl32: use compat_u64 for video standard

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of using the "v4l2_std_id" typedef, use compat_u64,
as otherwise it fails to properly handle some ioctls.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -686,7 +686,7 @@ struct v4l2_input32 {
 	__u32	     type;		/*  Type of input */
 	__u32	     audioset;		/*  Associated audios (bitfield) */
 	__u32        tuner;             /*  Associated tuner */
-	v4l2_std_id  std;
+	compat_u64   std;
 	__u32	     status;
 	__u32	     capabilities;
 	__u32	     reserved[3];

[PATCH 3.18 74/93] media: v4l2-compat-ioctl32: initialize a reserved field

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The get_v4l2_create32() function is missing a logic with
would be cleaning a reserved field, causing v4l2-compliance
to complain:

 Buffer ioctls (Input 0):
		fail: v4l2-test-buffers.cpp(506): check_0(crbufs.reserved, sizeof(crbufs.reserved))
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-compat-ioctl32.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -247,7 +247,8 @@ static int get_v4l2_create32(struct v4l2
 {
 	if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
 	    copy_in_user(kp, up,
-			 offsetof(struct v4l2_create_buffers32, format)))
+			 offsetof(struct v4l2_create_buffers32, format)) ||
+	    copy_in_user(kp->reserved, up->reserved, sizeof(kp->reserved)))
 		return -EFAULT;
 	return __get_v4l2_format32(&kp->format, &up->format,
 				   aux_buf, aux_space);

[PATCH 3.18 75/93] USB: serial: ftdi_sio: add RT Systems VX-8 cable

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Major Hayden <major@mhtx.net>

commit 9608e5c0f079390473b484ef92334dfd3431bb89 upstream.

This patch adds a device ID for the RT Systems cable used to
program Yaesu VX-8R/VX-8DR handheld radios. It uses the main
FTDI VID instead of the common RT Systems VID.

Signed-off-by: Major Hayden <major@mhtx.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    3 +++
 2 files changed, 4 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -773,6 +773,7 @@ static const struct usb_device_id id_tab
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
+	{ USB_DEVICE(FTDI_VID, RTSYSTEMS_USB_VX8_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -903,6 +903,9 @@
 /*
  * RT Systems programming cables for various ham radios
  */
+/* This device uses the VID of FTDI */
+#define RTSYSTEMS_USB_VX8_PID   0x9e50  /* USB-VX8 USB to 7 pin modular plug for Yaesu VX-8 radio */
+
 #define RTSYSTEMS_VID		0x2100	/* Vendor ID */
 #define RTSYSTEMS_USB_S03_PID	0x9001	/* RTS-03 USB to Serial Adapter */
 #define RTSYSTEMS_USB_59_PID	0x9e50	/* USB-59 USB to 8 pin plug */

[PATCH 3.18 76/93] USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Clemens Werther <clemens.werther@gmail.com>

commit 6555ad13a01952c16485c82a52ad1f3e07e34b3a upstream.

Add device id for Harman FirmwareHubEmulator to make the device
auto-detectable by the driver.

Signed-off-by: Clemens Werther <clemens.werther@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++++
 2 files changed, 7 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -936,6 +936,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FHE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
 	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1425,6 +1425,12 @@
 #define FTDI_CINTERION_MC55I_PID	0xA951
 
 /*
+ * Product: FirmwareHubEmulator
+ * Manufacturer: Harman Becker Automotive Systems
+ */
+#define FTDI_FHE_PID		0xA9A0
+
+/*
  * Product: Comet Caller ID decoder
  * Manufacturer: Crucible Technologies
  */

[PATCH 3.18 77/93] USB: serial: cp210x: add ELDAT Easywave RX09 id

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 1f1e82f74c0947e40144688c9e36abe4b3999f49 upstream.

Add device id for ELDAT Easywave RX09 tranceiver.

Reported-by: Jan Jansen <nattelip@hotmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -149,6 +149,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */
 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
 	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+	{ USB_DEVICE(0x155A, 0x1006) },	/* ELDAT Easywave RX09 */
 	{ USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
 	{ USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */

[PATCH 3.18 78/93] mei: remove dev_err message on an unsupported ioctl

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

commit bb0829a741792b56c908d7745bc0b2b540293bcc upstream.

Currently the driver spams the kernel log on unsupported ioctls which is
unnecessary as the ioctl returns -ENOIOCTLCMD to indicate this anyway.
I suspect this was originally for debugging purposes but it really is not
required so remove it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/mei/main.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -556,7 +556,6 @@ static long mei_ioctl(struct file *file,
 		break;
 
 	default:
-		dev_err(dev->dev, ": unsupported ioctl %d.\n", cmd);
 		rets = -ENOIOCTLCMD;
 	}
 

[PATCH 3.18 79/93] media: usbtv: prevent double free in error case

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <oneukum@suse.com>

commit 50e7044535537b2a54c7ab798cd34c7f6d900bd2 upstream.

Quoting the original report:

It looks like there is a double-free vulnerability in Linux usbtv driver
on an error path of usbtv_probe function. When audio registration fails,
usbtv_video_free function ends up freeing usbtv data structure, which
gets freed the second time under usbtv_video_fail label.

usbtv_audio_fail:

        usbtv_video_free(usbtv); =>

           v4l2_device_put(&usbtv->v4l2_dev);

              => v4l2_device_put

                  => kref_put

                      => v4l2_device_release

  => usbtv_release (CALLBACK)

                             => kfree(usbtv) (1st time)

usbtv_video_fail:

        usb_set_intfdata(intf, NULL);

        usb_put_dev(usbtv->udev);

        kfree(usbtv); (2nd time)

So, as we have refcounting, use it

Reported-by: Yavuz, Tuba <tuba@ece.ufl.edu>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/usbtv/usbtv-core.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/media/usb/usbtv/usbtv-core.c
+++ b/drivers/media/usb/usbtv/usbtv-core.c
@@ -95,6 +95,8 @@ static int usbtv_probe(struct usb_interf
 	return 0;
 
 usbtv_audio_fail:
+	/* we must not free at this point */
+	usb_get_dev(usbtv->udev);
 	usbtv_video_free(usbtv);
 
 usbtv_video_fail:

[PATCH 3.18 80/93] parport_pc: Add support for WCH CH382L PCI-E single parallel port card.

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Gerasiov <gq@redlab-i.ru>

commit 823f7923833c6cc2b16e601546d607dcfb368004 upstream.

WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382
but serial ports are not soldered on board. Detected as
Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850])

Signed-off-by: Alexander Gerasiov <gq@redlab-i.ru>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/parport/parport_pc.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2646,6 +2646,7 @@ enum parport_pc_pci_cards {
 	netmos_9901,
 	netmos_9865,
 	quatech_sppxp100,
+	wch_ch382l,
 };
 
 
@@ -2708,6 +2709,7 @@ static struct parport_pc_pci {
 	/* netmos_9901 */               { 1, { { 0, -1 }, } },
 	/* netmos_9865 */               { 1, { { 0, -1 }, } },
 	/* quatech_sppxp100 */		{ 1, { { 0, 1 }, } },
+	/* wch_ch382l */		{ 1, { { 2, -1 }, } },
 };
 
 static const struct pci_device_id parport_pc_pci_tbl[] = {
@@ -2797,6 +2799,8 @@ static const struct pci_device_id parpor
 	/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
 	{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
+	/* WCH CH382L PCI-E single parallel port card */
+	{ 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382l },
 	{ 0, } /* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);

[PATCH 3.18 81/93] crypto: ahash - Fix early termination in hash walk

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herbert Xu <herbert@gondor.apana.org.au>

commit 900a081f6912a8985dc15380ec912752cb66025a upstream.

When we have an unaligned SG list entry where there is no leftover
aligned data, the hash walk code will incorrectly return zero as if
the entire SG list has been processed.

This patch fixes it by moving onto the next page instead.

Reported-by: Eli Cooper <elicooper@gmx.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/ahash.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -90,13 +90,14 @@ int crypto_hash_walk_done(struct crypto_
 
 	if (nbytes && walk->offset & alignmask && !err) {
 		walk->offset = ALIGN(walk->offset, alignmask + 1);
-		walk->data += walk->offset;
-
 		nbytes = min(nbytes,
 			     ((unsigned int)(PAGE_SIZE)) - walk->offset);
 		walk->entrylen -= nbytes;
 
-		return nbytes;
+		if (nbytes) {
+			walk->data += walk->offset;
+			return nbytes;
+		}
 	}
 
 	if (walk->flags & CRYPTO_ALG_ASYNC)

[PATCH 3.18 82/93] crypto: x86/cast5-avx - fix ECB encryption when long sg follows short one

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 8f461b1e02ed546fbd0f11611138da67fd85a30f upstream.

With ecb-cast5-avx, if a 128+ byte scatterlist element followed a
shorter one, then the algorithm accidentally encrypted/decrypted only 8
bytes instead of the expected 128 bytes.  Fix it by setting the
encryption/decryption 'fn' correctly.

Fixes: c12ab20b162c ("crypto: cast5/avx - avoid using temporary stack buffers")
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/cast5_avx_glue.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/arch/x86/crypto/cast5_avx_glue.c
+++ b/arch/x86/crypto/cast5_avx_glue.c
@@ -67,8 +67,6 @@ static int ecb_crypt(struct blkcipher_de
 	void (*fn)(struct cast5_ctx *ctx, u8 *dst, const u8 *src);
 	int err;
 
-	fn = (enc) ? cast5_ecb_enc_16way : cast5_ecb_dec_16way;
-
 	err = blkcipher_walk_virt(desc, walk);
 	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 
@@ -80,6 +78,7 @@ static int ecb_crypt(struct blkcipher_de
 
 		/* Process multi-block batch */
 		if (nbytes >= bsize * CAST5_PARALLEL_BLOCKS) {
+			fn = (enc) ? cast5_ecb_enc_16way : cast5_ecb_dec_16way;
 			do {
 				fn(ctx, wdst, wsrc);
 

[PATCH 3.18 83/93] proc: revert /proc/<pid>/maps [stack:TID] annotation

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Weiner <hannes@cmpxchg.org>

commit 65376df582174ffcec9e6471bf5b0dd79ba05e4a upstream.

Commit b76437579d13 ("procfs: mark thread stack correctly in
proc/<pid>/maps") added [stack:TID] annotation to /proc/<pid>/maps.

Finding the task of a stack VMA requires walking the entire thread list,
turning this into quadratic behavior: a thousand threads means a
thousand stacks, so the rendering of /proc/<pid>/maps needs to look at a
million combinations.

The cost is not in proportion to the usefulness as described in the
patch.

Drop the [stack:TID] annotation to make /proc/<pid>/maps (and
/proc/<pid>/numa_maps) usable again for higher thread counts.

The [stack] annotation inside /proc/<pid>/task/<tid>/maps is retained, as
identifying the stack VMA there is an O(1) operation.

Siddesh said:
 "The end users needed a way to identify thread stacks programmatically and
  there wasn't a way to do that.  I'm afraid I no longer remember (or have
  access to the resources that would aid my memory since I changed
  employers) the details of their requirement.  However, I did do this on my
  own time because I thought it was an interesting project for me and nobody
  really gave any feedback then as to its utility, so as far as I am
  concerned you could roll back the main thread maps information since the
  information is available in the thread-specific files"

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/filesystems/proc.txt |    9 +----
 fs/proc/task_mmu.c                 |   66 ++++++++++++-------------------------
 fs/proc/task_nommu.c               |   49 +++++++++++----------------
 include/linux/mm.h                 |    3 -
 mm/util.c                          |   27 ---------------
 5 files changed, 48 insertions(+), 106 deletions(-)

--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -334,7 +334,7 @@ address           perms offset  dev   in
 a7cb1000-a7cb2000 ---p 00000000 00:00 0
 a7cb2000-a7eb2000 rw-p 00000000 00:00 0
 a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0          [stack:1001]
+a7eb3000-a7ed5000 rw-p 00000000 00:00 0
 a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
 a8008000-a800a000 r--p 00133000 03:00 4222       /lib/libc.so.6
 a800a000-a800b000 rw-p 00135000 03:00 4222       /lib/libc.so.6
@@ -366,7 +366,6 @@ is not associated with a file:
 
  [heap]                   = the heap of the program
  [stack]                  = the stack of the main process
- [stack:1001]             = the stack of the thread with tid 1001
  [vdso]                   = the "virtual dynamic shared object",
                             the kernel system call handler
 
@@ -374,10 +373,8 @@ is not associated with a file:
 
 The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
 of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. This is a key difference from the
-content of /proc/PID/maps, where you will see all mappings that are being used
-as stack by all of those tasks. Hence, for the example above, the task-level
-map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
+as [stack] if that task sees it as a stack. Hence, for the example above, the
+task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
 
 08048000-08049000 r-xp 00000000 03:00 8312       /opt/test
 08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -243,23 +243,29 @@ static int do_maps_open(struct inode *in
 				sizeof(struct proc_maps_private));
 }
 
-static pid_t pid_of_stack(struct proc_maps_private *priv,
-				struct vm_area_struct *vma, bool is_pid)
+/*
+ * Indicate if the VMA is a stack for the given task; for
+ * /proc/PID/maps that is the stack of the main task.
+ */
+static int is_stack(struct proc_maps_private *priv,
+		    struct vm_area_struct *vma, int is_pid)
 {
-	struct inode *inode = priv->inode;
-	struct task_struct *task;
-	pid_t ret = 0;
+	int stack = 0;
+
+	if (is_pid) {
+		stack = vma->vm_start <= vma->vm_mm->start_stack &&
+			vma->vm_end >= vma->vm_mm->start_stack;
+	} else {
+		struct inode *inode = priv->inode;
+		struct task_struct *task;
 
-	rcu_read_lock();
-	task = pid_task(proc_pid(inode), PIDTYPE_PID);
-	if (task) {
-		task = task_of_stack(task, vma, is_pid);
+		rcu_read_lock();
+		task = pid_task(proc_pid(inode), PIDTYPE_PID);
 		if (task)
-			ret = task_pid_nr_ns(task, inode->i_sb->s_fs_info);
+			stack = vma_is_stack_for_task(vma, task);
+		rcu_read_unlock();
 	}
-	rcu_read_unlock();
-
-	return ret;
+	return stack;
 }
 
 static void
@@ -315,8 +321,6 @@ show_map_vma(struct seq_file *m, struct
 
 	name = arch_vma_name(vma);
 	if (!name) {
-		pid_t tid;
-
 		if (!mm) {
 			name = "[vdso]";
 			goto done;
@@ -328,21 +332,8 @@ show_map_vma(struct seq_file *m, struct
 			goto done;
 		}
 
-		tid = pid_of_stack(priv, vma, is_pid);
-		if (tid != 0) {
-			/*
-			 * Thread stack in /proc/PID/task/TID/maps or
-			 * the main process stack.
-			 */
-			if (!is_pid || (vma->vm_start <= mm->start_stack &&
-			    vma->vm_end >= mm->start_stack)) {
-				name = "[stack]";
-			} else {
-				/* Thread stack in /proc/PID/maps */
-				seq_pad(m, ' ');
-				seq_printf(m, "[stack:%d]", tid);
-			}
-		}
+		if (is_stack(priv, vma, is_pid))
+			name = "[stack]";
 	}
 
 done:
@@ -1510,19 +1501,8 @@ static int show_numa_map(struct seq_file
 		seq_path(m, &file->f_path, "\n\t= ");
 	} else if (vma->vm_start <= mm->brk && vma->vm_end >= mm->start_brk) {
 		seq_puts(m, " heap");
-	} else {
-		pid_t tid = pid_of_stack(proc_priv, vma, is_pid);
-		if (tid != 0) {
-			/*
-			 * Thread stack in /proc/PID/task/TID/maps or
-			 * the main process stack.
-			 */
-			if (!is_pid || (vma->vm_start <= mm->start_stack &&
-			    vma->vm_end >= mm->start_stack))
-				seq_puts(m, " stack");
-			else
-				seq_printf(m, " stack:%d", tid);
-		}
+	} else if (is_stack(proc_priv, vma, is_pid)) {
+		seq_puts(m, " stack");
 	}
 
 	if (is_vm_hugetlb_page(vma))
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -123,23 +123,26 @@ unsigned long task_statm(struct mm_struc
 	return size;
 }
 
-static pid_t pid_of_stack(struct proc_maps_private *priv,
-				struct vm_area_struct *vma, bool is_pid)
+static int is_stack(struct proc_maps_private *priv,
+		    struct vm_area_struct *vma, int is_pid)
 {
-	struct inode *inode = priv->inode;
-	struct task_struct *task;
-	pid_t ret = 0;
-
-	rcu_read_lock();
-	task = pid_task(proc_pid(inode), PIDTYPE_PID);
-	if (task) {
-		task = task_of_stack(task, vma, is_pid);
+	struct mm_struct *mm = vma->vm_mm;
+	int stack = 0;
+
+	if (is_pid) {
+		stack = vma->vm_start <= mm->start_stack &&
+			vma->vm_end >= mm->start_stack;
+	} else {
+		struct inode *inode = priv->inode;
+		struct task_struct *task;
+
+		rcu_read_lock();
+		task = pid_task(proc_pid(inode), PIDTYPE_PID);
 		if (task)
-			ret = task_pid_nr_ns(task, inode->i_sb->s_fs_info);
+			stack = vma_is_stack_for_task(vma, task);
+		rcu_read_unlock();
 	}
-	rcu_read_unlock();
-
-	return ret;
+	return stack;
 }
 
 /*
@@ -181,21 +184,9 @@ static int nommu_vma_show(struct seq_fil
 	if (file) {
 		seq_pad(m, ' ');
 		seq_path(m, &file->f_path, "");
-	} else if (mm) {
-		pid_t tid = pid_of_stack(priv, vma, is_pid);
-
-		if (tid != 0) {
-			seq_pad(m, ' ');
-			/*
-			 * Thread stack in /proc/PID/task/TID/maps or
-			 * the main process stack.
-			 */
-			if (!is_pid || (vma->vm_start <= mm->start_stack &&
-			    vma->vm_end >= mm->start_stack))
-				seq_printf(m, "[stack]");
-			else
-				seq_printf(m, "[stack:%d]", tid);
-		}
+	} else if (mm && is_stack(priv, vma, is_pid)) {
+		seq_pad(m, ' ');
+		seq_printf(m, "[stack]");
 	}
 
 	seq_putc(m, '\n');
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1242,8 +1242,7 @@ int set_page_dirty_lock(struct page *pag
 int clear_page_dirty_for_io(struct page *page);
 int get_cmdline(struct task_struct *task, char *buffer, int buflen);
 
-extern struct task_struct *task_of_stack(struct task_struct *task,
-				struct vm_area_struct *vma, bool in_group);
+int vma_is_stack_for_task(struct vm_area_struct *vma, struct task_struct *t);
 
 extern unsigned long move_page_tables(struct vm_area_struct *vma,
 		unsigned long old_addr, struct vm_area_struct *new_vma,
--- a/mm/util.c
+++ b/mm/util.c
@@ -185,36 +185,11 @@ void __vma_link_list(struct mm_struct *m
 }
 
 /* Check if the vma is being used as a stack by this task */
-static int vm_is_stack_for_task(struct task_struct *t,
-				struct vm_area_struct *vma)
+int vma_is_stack_for_task(struct vm_area_struct *vma, struct task_struct *t)
 {
 	return (vma->vm_start <= KSTK_ESP(t) && vma->vm_end >= KSTK_ESP(t));
 }
 
-/*
- * Check if the vma is being used as a stack.
- * If is_group is non-zero, check in the entire thread group or else
- * just check in the current task. Returns the task_struct of the task
- * that the vma is stack for. Must be called under rcu_read_lock().
- */
-struct task_struct *task_of_stack(struct task_struct *task,
-				struct vm_area_struct *vma, bool in_group)
-{
-	if (vm_is_stack_for_task(task, vma))
-		return task;
-
-	if (in_group) {
-		struct task_struct *t;
-
-		for_each_thread(task, t) {
-			if (vm_is_stack_for_task(t, vma))
-				return t;
-		}
-	}
-
-	return NULL;
-}
-
 #if defined(CONFIG_MMU) && !defined(HAVE_ARCH_PICK_MMAP_LAYOUT)
 void arch_pick_mmap_layout(struct mm_struct *mm)
 {

[PATCH 3.18 84/93] fs/proc: Stop trying to report thread stacks

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit b18cb64ead400c01bf1580eeba330ace51f8087d upstream.

This reverts more of:

  b76437579d13 ("procfs: mark thread stack correctly in proc/<pid>/maps")

... which was partially reverted by:

  65376df58217 ("proc: revert /proc/<pid>/maps [stack:TID] annotation")

Originally, /proc/PID/task/TID/maps was the same as /proc/TID/maps.

In current kernels, /proc/PID/maps (or /proc/TID/maps even for
threads) shows "[stack]" for VMAs in the mm's stack address range.

In contrast, /proc/PID/task/TID/maps uses KSTK_ESP to guess the
target thread's stack's VMA.  This is racy, probably returns garbage
and, on arches with CONFIG_TASK_INFO_IN_THREAD=y, is also crash-prone:
KSTK_ESP is not safe to use on tasks that aren't known to be running
ordinary process-context kernel code.

This patch removes the difference and just shows "[stack]" for VMAs
in the mm's stack range.  This is IMO much more sensible -- the
actual "stack" address really is treated specially by the VM code,
and the current thread stack isn't even well-defined for programs
that frequently switch stacks on their own.

Reported-by: Jann Horn <jann@thejh.net>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux API <linux-api@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tycho Andersen <tycho.andersen@canonical.com>
Link: http://lkml.kernel.org/r/3e678474ec14e0a0ec34c611016753eea2e1b8ba.1475257877.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/filesystems/proc.txt |   26 --------------------------
 fs/proc/task_mmu.c                 |   29 ++++++++++-------------------
 fs/proc/task_nommu.c               |   26 +++++++++-----------------
 3 files changed, 19 insertions(+), 62 deletions(-)

--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -371,32 +371,6 @@ is not associated with a file:
 
  or if empty, the mapping is anonymous.
 
-The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
-of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. Hence, for the example above, the
-task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
-
-08048000-08049000 r-xp 00000000 03:00 8312       /opt/test
-08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
-0804a000-0806b000 rw-p 00000000 00:00 0          [heap]
-a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0
-a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0          [stack]
-a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
-a8008000-a800a000 r--p 00133000 03:00 4222       /lib/libc.so.6
-a800a000-a800b000 rw-p 00135000 03:00 4222       /lib/libc.so.6
-a800b000-a800e000 rw-p 00000000 00:00 0
-a800e000-a8022000 r-xp 00000000 03:00 14462      /lib/libpthread.so.0
-a8022000-a8023000 r--p 00013000 03:00 14462      /lib/libpthread.so.0
-a8023000-a8024000 rw-p 00014000 03:00 14462      /lib/libpthread.so.0
-a8024000-a8027000 rw-p 00000000 00:00 0
-a8027000-a8043000 r-xp 00000000 03:00 8317       /lib/ld-linux.so.2
-a8043000-a8044000 r--p 0001b000 03:00 8317       /lib/ld-linux.so.2
-a8044000-a8045000 rw-p 0001c000 03:00 8317       /lib/ld-linux.so.2
-aff35000-aff4a000 rw-p 00000000 00:00 0
-ffffe000-fffff000 r-xp 00000000 00:00 0          [vdso]
-
 The /proc/PID/smaps is an extension based on maps, showing the memory
 consumption for each of the process's mappings. For each of mappings there
 is a series of lines such as the following:
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -248,24 +248,15 @@ static int do_maps_open(struct inode *in
  * /proc/PID/maps that is the stack of the main task.
  */
 static int is_stack(struct proc_maps_private *priv,
-		    struct vm_area_struct *vma, int is_pid)
+		    struct vm_area_struct *vma)
 {
-	int stack = 0;
-
-	if (is_pid) {
-		stack = vma->vm_start <= vma->vm_mm->start_stack &&
-			vma->vm_end >= vma->vm_mm->start_stack;
-	} else {
-		struct inode *inode = priv->inode;
-		struct task_struct *task;
-
-		rcu_read_lock();
-		task = pid_task(proc_pid(inode), PIDTYPE_PID);
-		if (task)
-			stack = vma_is_stack_for_task(vma, task);
-		rcu_read_unlock();
-	}
-	return stack;
+	/*
+	 * We make no effort to guess what a given thread considers to be
+	 * its "stack".  It's not even well-defined for programs written
+	 * languages like Go.
+	 */
+	return vma->vm_start <= vma->vm_mm->start_stack &&
+		vma->vm_end >= vma->vm_mm->start_stack;
 }
 
 static void
@@ -332,7 +323,7 @@ show_map_vma(struct seq_file *m, struct
 			goto done;
 		}
 
-		if (is_stack(priv, vma, is_pid))
+		if (is_stack(priv, vma))
 			name = "[stack]";
 	}
 
@@ -1501,7 +1492,7 @@ static int show_numa_map(struct seq_file
 		seq_path(m, &file->f_path, "\n\t= ");
 	} else if (vma->vm_start <= mm->brk && vma->vm_end >= mm->start_brk) {
 		seq_puts(m, " heap");
-	} else if (is_stack(proc_priv, vma, is_pid)) {
+	} else if (is_stack(proc_priv, vma)) {
 		seq_puts(m, " stack");
 	}
 
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -124,25 +124,17 @@ unsigned long task_statm(struct mm_struc
 }
 
 static int is_stack(struct proc_maps_private *priv,
-		    struct vm_area_struct *vma, int is_pid)
+		    struct vm_area_struct *vma)
 {
 	struct mm_struct *mm = vma->vm_mm;
-	int stack = 0;
 
-	if (is_pid) {
-		stack = vma->vm_start <= mm->start_stack &&
-			vma->vm_end >= mm->start_stack;
-	} else {
-		struct inode *inode = priv->inode;
-		struct task_struct *task;
-
-		rcu_read_lock();
-		task = pid_task(proc_pid(inode), PIDTYPE_PID);
-		if (task)
-			stack = vma_is_stack_for_task(vma, task);
-		rcu_read_unlock();
-	}
-	return stack;
+	/*
+	 * We make no effort to guess what a given thread considers to be
+	 * its "stack".  It's not even well-defined for programs written
+	 * languages like Go.
+	 */
+	return vma->vm_start <= mm->start_stack &&
+		vma->vm_end >= mm->start_stack;
 }
 
 /*
@@ -184,7 +176,7 @@ static int nommu_vma_show(struct seq_fil
 	if (file) {
 		seq_pad(m, ' ');
 		seq_path(m, &file->f_path, "");
-	} else if (mm && is_stack(priv, vma, is_pid)) {
+	} else if (mm && is_stack(priv, vma)) {
 		seq_pad(m, ' ');
 		seq_printf(m, "[stack]");
 	}

[PATCH 3.18 85/93] Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dennis Wassenberg <dennis.wassenberg@secunet.com>

commit b56af54ac78c54a519d82813836f305d7f76ef27 upstream.

Reset i8042 before probing because of insufficient BIOS initialisation of
the i8042 serial controller. This makes Synaptics touchpad detection
possible. Without resetting the Synaptics touchpad is not detected because
there are always NACK messages from AUX port.

Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/serio/i8042-x86ia64io.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -603,6 +603,13 @@ static const struct dmi_system_id __init
 		},
 	},
 	{
+		/* Lenovo ThinkPad L460 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L460"),
+		},
+	},
+	{
 		/* Clevo P650RS, 650RP6, Sager NP8152-S, and others */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),

[PATCH 3.18 86/93] Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ondrej Zary <linux@rainbow-software.org>

commit 04bb1719c4de94700056241d4c0fe3c1413f5aff upstream.

The touch sensor buttons on Sony VAIO VGN-CS series laptops (e.g.
VGN-CS31S) are a separate PS/2 device. As the MUX is disabled for all
VAIO machines by the nomux blacklist, the data from touch sensor
buttons and touchpad are combined. The protocol used by the buttons is
probably similar to the touchpad protocol (both are Synaptics) so both
devices get enabled. The controller combines the data, creating a mess
which results in random button clicks, touchpad stopping working and
lost sync error messages:
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request

Add a new i8042_dmi_forcemux_table whitelist with VGN-CS.
With MUX enabled, touch sensor buttons are detected as separate device
(and left disabled as there's currently no driver), fixing all touchpad
problems.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/serio/i8042-x86ia64io.h |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)

--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -712,6 +712,20 @@ static const struct dmi_system_id __init
 	{ }
 };
 
+static const struct dmi_system_id i8042_dmi_forcemux_table[] __initconst = {
+	{
+		/*
+		 * Sony Vaio VGN-CS series require MUX or the touch sensor
+		 * buttons will disturb touchpad operation
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-CS"),
+		},
+	},
+	{ }
+};
+
 /*
  * Some Wistron based laptops need us to explicitly enable the 'Dritek
  * keyboard extension' to make their extra keys start generating scancodes.
@@ -1124,6 +1138,9 @@ static int __init i8042_platform_init(vo
 	if (dmi_check_system(i8042_dmi_nomux_table))
 		i8042_nomux = true;
 
+	if (dmi_check_system(i8042_dmi_forcemux_table))
+		i8042_nomux = false;
+
 	if (dmi_check_system(i8042_dmi_notimeout_table))
 		i8042_notimeout = true;
 

[PATCH 3.18 87/93] vt: change SGR 21 to follow the standards

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Frysinger <vapier@chromium.org>

commit 65d9982d7e523a1a8e7c9af012da0d166f72fc56 upstream.

ECMA-48 [1] (aka ISO 6429) has defined SGR 21 as "doubly underlined"
since at least March 1984.  The Linux kernel has treated it as SGR 22
"normal intensity" since it was added in Linux-0.96b in June 1992.
Before that, it was simply ignored.  Other terminal emulators have
either ignored it, or treat it as double underline now.  xterm for
example added support in its 304 release (May 2014) [2] where it was
previously ignoring it.

Changing this behavior shouldn't be an issue:
- It isn't a named capability in ncurses's terminfo database, so no
  script is using libtinfo/libcurses to look this up, or using tput
  to query & output the right sequence.
- Any script assuming SGR 21 will reset intensity in all terminals
  already do not work correctly on non-Linux VTs (including running
  under screen/tmux/etc...).
- If someone has written a script that only runs in the Linux VT, and
  they're using SGR 21 (instead of SGR 22), the output should still
  be readable.

imo it's important to change this as the Linux VT's non-conformance
is sometimes used as an argument for other terminal emulators to not
implement SGR 21 at all, or do so incorrectly.

[1]: https://www.ecma-international.org/publications/standards/Ecma-048.htm
[2]: https://github.com/ThomasDickey/xterm-snapshots/commit/2fd29cb98d214cb536bcafbee00bc73b3f1eeb9d

Signed-off-by: Mike Frysinger <vapier@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/vt/vt.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1303,6 +1303,11 @@ static void csi_m(struct vc_data *vc)
 			case 3:
 				vc->vc_italic = 1;
 				break;
+			case 21:
+				/*
+				 * No console drivers support double underline, so
+				 * convert it to a single underline.
+				 */
 			case 4:
 				vc->vc_underline = 1;
 				break;
@@ -1339,7 +1344,6 @@ static void csi_m(struct vc_data *vc)
 				vc->vc_disp_ctrl = 1;
 				vc->vc_toggle_meta = 1;
 				break;
-			case 21:
 			case 22:
 				vc->vc_intensity = 1;
 				break;

[PATCH 3.18 88/93] Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keerthy <j-keerthy@ti.com>

commit 0ea66f76ba17a4b229caaadd77de694111b21769 upstream.

GPIO7 is configured in POWERHOLD mode which has higher priority
over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON
bit is turned off. This property enables driver to over ride the
POWERHOLD value to GPIO7 so as to turn off the PMIC in power off
scenarios.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
@@ -35,6 +35,15 @@ Optional properties:
 - ti,palmas-enable-dvfs2: Enable DVFS2. Configure pins for DVFS2 mode.
 	Selection primary or secondary function associated to GPADC_START
 	and SYSEN2 pin/pad for DVFS2 interface
+- ti,palmas-override-powerhold: This is applicable for PMICs for which
+	GPIO7 is configured in POWERHOLD mode which has higher priority
+	over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON
+	bit is turned off. This property enables driver to over ride the
+	POWERHOLD value to GPIO7 so as to turn off the PMIC in power off
+	scenarios. So for GPIO7 if ti,palmas-override-powerhold is set
+	then the GPIO_7 field should never be muxed to anything else.
+	It should be set to POWERHOLD by default and only in case of
+	power off scenarios the driver will over ride the mux value.
 
 This binding uses the following generic properties as defined in
 pinctrl-bindings.txt:

[PATCH 3.18 89/93] ARM: dts: dra7: Add power hold and power controller properties to palmas

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keerthy <j-keerthy@ti.com>

commit 7c62de5f3fc92291decc0dac5f36949bdc3fb575 upstream.

Add power hold and power controller properties to palmas node.
This is needed to shutdown pmic correctly on boards with
powerhold set.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/dra7-evm.dts |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -182,6 +182,8 @@
 	tps659038: tps659038@58 {
 		compatible = "ti,tps659038";
 		reg = <0x58>;
+		ti,palmas-override-powerhold;
+		ti,system-power-controller;
 
 		tps659038_pmic {
 			compatible = "ti,tps659038-pmic";

[PATCH 3.18 90/93] md/raid10: reset the first at the end of loop

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guoqing Jiang <gqjiang@suse.com>

commit 6f287ca6046edd34ed83aafb7f9033c9c2e809e2 upstream.

We need to set "first = 0' at the end of rdev_for_each
loop, so we can get the array's min_offset_diff correctly
otherwise min_offset_diff just means the last rdev's
offset diff.

[only the first chunk, due to b506335e5d2b ("md/raid10: skip spare disk as
'first' disk") being already applied - gregkh]

Suggested-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/raid10.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -3717,6 +3717,7 @@ static int run(struct mddev *mddev)
 
 		if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
 			discard_supported = true;
+		first = 0;
 	}
 
 	if (mddev->queue) {

[PATCH 3.18 91/93] Revert "PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()"

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 058645e2f0647c85f2bfd577771546d198739fd2 which was
commit fda78d7a0ead144f4b2cdb582dcba47911f4952c upstream.

The dependancy tree is just too messy here, just drop it from this
kernel as it's not really needed here.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: David Arcari <darcari@redhat.com>
Cc: Myron Stowe <mstowe@redhat.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/pci-driver.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -450,6 +450,8 @@ static void pci_device_shutdown(struct d
 
 	if (drv && drv->shutdown)
 		drv->shutdown(pci_dev);
+	pci_msi_shutdown(pci_dev);
+	pci_msix_shutdown(pci_dev);
 
 #ifdef CONFIG_KEXEC
 	/*

[PATCH 3.18 92/93] Revert "ARM: dts: omap3-n900: Fix the audio CODECs reset pin"

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 9d8df5594467b6c73c3833b462abe5811fe7295b which was
commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 upstream.

It requires a driver that was not merged until 4.16, so remove it from
this stable tree as it is pointless.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/omap3-n900.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -435,7 +435,7 @@
 	tlv320aic3x: tlv320aic3x@18 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x18>;
-		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
+		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
 		ai3x-gpio-func = <
 			0 /* AIC3X_GPIO1_FUNC_DISABLED */
 			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
@@ -452,7 +452,7 @@
 	tlv320aic3x_aux: tlv320aic3x@19 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x19>;
-		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
+		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
 
 		AVDD-supply = <&vmmc2>;
 		DRVDD-supply = <&vmmc2>;

[PATCH 3.18 93/93] Revert "ARM: dts: am335x-pepper: Fix the audio CODECs reset pin"

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 2d8c5aa6dc436f6fc1c8b6c0feaee4b0f60cdf38 which was
comit e153db03c6b7a035c797bcdf35262586f003ee93 upstream.

It requires a driver that was not merged until 4.16, so remove it from
this stable tree as it is pointless.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/am335x-pepper.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -138,7 +138,7 @@
 &audio_codec {
 	status = "okay";
 
-	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
 	AVDD-supply = <&ldo3_reg>;
 	IOVDD-supply = <&ldo3_reg>;
 	DRVDD-supply = <&ldo3_reg>;

Re: [PATCH 3.18 00/93] 3.18.103-stable review

[kernelci.org bot]

stable-rc/linux-3.18.y boot: 17 boots: 0 failed, 17 passed (v3.18.102-94-ge51aafcc98be)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-3.18.y/kernel/v3.18.102-94-ge51aafcc98be/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-3.18.y/kernel/v3.18.102-94-ge51aafcc98be/

Tree: stable-rc
Branch: linux-3.18.y
Git Describe: v3.18.102-94-ge51aafcc98be
Git Commit: e51aafcc98be6a446a32b6f6cbee28b91d81bbf0
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 9 unique boards, 7 SoC families, 9 builds out of 167

---
For more info write to <info@kernelci.org>

Re: [PATCH 3.18 00/93] 3.18.103-stable review

[Harsh Shandilya]

On 6 April 2018 6:52:29 PM IST, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>This is the start of the stable review cycle for the 3.18.103 release.
>There are 93 patches in this series, all will be posted as a response
>to this one.  If anyone has any issues with these being applied, please
>let me know.
>
>Responses should be made by Sun Apr  8 08:42:04 UTC 2018.
>Anything received after that time might be too late.
>
>The whole patch series can be found in one patch at:
>	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.103-rc1.gz
>or in the git tree and branch at:
>	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>linux-3.18.y
>and the diffstat can be found below.
>
>thanks,
>
>greg k-h

Builds and boots on the OnePlus3T, no visible regressions. The merge was slightly gnarly with "proc: revert /proc/<pid>/maps [stack:TID] annotation" conflicting due to kernel-common changes and the v4l2 series conflicting with CAF changes in the msm-3.18 tree.

Thanks,

Harsh Shandilya

Re: [PATCH 3.18 00/93] 3.18.103-stable review

[Greg Kroah-Hartman]

On Sat, Apr 07, 2018 at 12:41:38AM +0530, Harsh Shandilya wrote:
> 
> 
> On 6 April 2018 6:52:29 PM IST, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> >This is the start of the stable review cycle for the 3.18.103 release.
> >There are 93 patches in this series, all will be posted as a response
> >to this one.  If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Sun Apr  8 08:42:04 UTC 2018.
> >Anything received after that time might be too late.
> >
> >The whole patch series can be found in one patch at:
> >	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.103-rc1.gz
> >or in the git tree and branch at:
> >	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> >linux-3.18.y
> >and the diffstat can be found below.
> >
> >thanks,
> >
> >greg k-h
> 
> Builds and boots on the OnePlus3T, no visible regressions. The merge was slightly gnarly with "proc: revert /proc/<pid>/maps [stack:TID] annotation" conflicting due to kernel-common changes and the v4l2 series conflicting with CAF changes in the msm-3.18 tree.

Yeah, the merge is going to be a bit messy, not as messy as 4.9.y is
going to be :)

Thanks for testing and letting me know.

greg k-h

Re: [PATCH 3.18 00/93] 3.18.103-stable review

[Shuah Khan]

On 04/06/2018 07:22 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.103 release.
> There are 93 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Apr  8 08:42:04 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.103-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 3.18 00/93] 3.18.103-stable review

[Guenter Roeck]

On Fri, Apr 06, 2018 at 03:22:29PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.103 release.
> There are 93 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Apr  8 08:42:04 UTC 2018.
> Anything received after that time might be too late.
> 

Not full results this time, sorry (my build system is corrupted),
but there are various build failures in 3.18.y.

drivers/net/ethernet/freescale/fec_main.c: In function 'fec_drv_remove':
drivers/net/ethernet/freescale/fec_main.c:3342:2: error: implicit declaration of function 'pm_runtime_put'

and similar.

Guenter

Re: [PATCH 3.18 00/93] 3.18.103-stable review

[Greg Kroah-Hartman]

On Sun, Apr 08, 2018 at 07:07:26AM -0700, Guenter Roeck wrote:
> On Fri, Apr 06, 2018 at 03:22:29PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.18.103 release.
> > There are 93 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Apr  8 08:42:04 UTC 2018.
> > Anything received after that time might be too late.
> > 
> 
> Not full results this time, sorry (my build system is corrupted),

Ah, I was wondering what happened to your web results, sorry about this :(

> but there are various build failures in 3.18.y.
> 
> drivers/net/ethernet/freescale/fec_main.c: In function 'fec_drv_remove':
> drivers/net/ethernet/freescale/fec_main.c:3342:2: error: implicit declaration of function 'pm_runtime_put'

Gotta love how 0-day doesn't catch these :(

I thought I fixed this up for the 4.4.y tree already, let me dig...

greg k-h

Re: [PATCH 3.18 00/93] 3.18.103-stable review

[Greg Kroah-Hartman]

On Sun, Apr 08, 2018 at 05:13:32PM +0200, Greg Kroah-Hartman wrote:
> On Sun, Apr 08, 2018 at 07:07:26AM -0700, Guenter Roeck wrote:
> > On Fri, Apr 06, 2018 at 03:22:29PM +0200, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 3.18.103 release.
> > > There are 93 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Sun Apr  8 08:42:04 UTC 2018.
> > > Anything received after that time might be too late.
> > > 
> > 
> > Not full results this time, sorry (my build system is corrupted),
> 
> Ah, I was wondering what happened to your web results, sorry about this :(
> 
> > but there are various build failures in 3.18.y.
> > 
> > drivers/net/ethernet/freescale/fec_main.c: In function 'fec_drv_remove':
> > drivers/net/ethernet/freescale/fec_main.c:3342:2: error: implicit declaration of function 'pm_runtime_put'
> 
> Gotta love how 0-day doesn't catch these :(

kernel.ci caught it :(

> I thought I fixed this up for the 4.4.y tree already, let me dig...

No, I didn't fix this for 4.4.y, that was something else.  Should be
easy for me to resolve for the next 3.18.y release.

thanks,

greg k-h

Re: [PATCH 3.18 00/93] 3.18.103-stable review

[Greg Kroah-Hartman]

On Sun, Apr 08, 2018 at 10:26:18PM +0200, Greg Kroah-Hartman wrote:
> On Sun, Apr 08, 2018 at 05:13:32PM +0200, Greg Kroah-Hartman wrote:
> > On Sun, Apr 08, 2018 at 07:07:26AM -0700, Guenter Roeck wrote:
> > > On Fri, Apr 06, 2018 at 03:22:29PM +0200, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 3.18.103 release.
> > > > There are 93 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> > > > 
> > > > Responses should be made by Sun Apr  8 08:42:04 UTC 2018.
> > > > Anything received after that time might be too late.
> > > > 
> > > 
> > > Not full results this time, sorry (my build system is corrupted),
> > 
> > Ah, I was wondering what happened to your web results, sorry about this :(
> > 
> > > but there are various build failures in 3.18.y.
> > > 
> > > drivers/net/ethernet/freescale/fec_main.c: In function 'fec_drv_remove':
> > > drivers/net/ethernet/freescale/fec_main.c:3342:2: error: implicit declaration of function 'pm_runtime_put'
> > 
> > Gotta love how 0-day doesn't catch these :(
> 
> kernel.ci caught it :(
> 
> > I thought I fixed this up for the 4.4.y tree already, let me dig...
> 
> No, I didn't fix this for 4.4.y, that was something else.  Should be
> easy for me to resolve for the next 3.18.y release.

Ok, added the needed .h file.

thanks,

greg k-h