All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays
@ 2018-04-10  6:18 Matt Ranostay
  2018-04-12  1:25 ` Nicholas Mc Guire
  0 siblings, 1 reply; 4+ messages in thread
From: Matt Ranostay @ 2018-04-10  6:18 UTC (permalink / raw)
  To: jic23; +Cc: linux-iio, Matt Ranostay, Nicholas Mc Guire

usleep_range() uses hrtimers and provides no advantage over msleep()
for larger delays.

Cc: Nicholas Mc Guire <hofrat@osadl.org>
Link: http://lkml.org/lkml/2017/1/11/377
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
---
 drivers/iio/chemical/atlas-ph-sensor.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c
index abfc4bbc4cfc..a406ad31b096 100644
--- a/drivers/iio/chemical/atlas-ph-sensor.c
+++ b/drivers/iio/chemical/atlas-ph-sensor.c
@@ -61,9 +61,9 @@
 #define ATLAS_REG_ORP_CALIB_STATUS	0x0d
 #define ATLAS_REG_ORP_DATA		0x0e
 
-#define ATLAS_PH_INT_TIME_IN_US		450000
-#define ATLAS_EC_INT_TIME_IN_US		650000
-#define ATLAS_ORP_INT_TIME_IN_US	450000
+#define ATLAS_PH_INT_TIME_IN_MS		450
+#define ATLAS_EC_INT_TIME_IN_MS		650
+#define ATLAS_ORP_INT_TIME_IN_MS	450
 
 enum {
 	ATLAS_PH_SM,
@@ -270,21 +270,21 @@ static struct atlas_device atlas_devices[] = {
 				.num_channels = 3,
 				.data_reg = ATLAS_REG_PH_DATA,
 				.calibration = &atlas_check_ph_calibration,
-				.delay = ATLAS_PH_INT_TIME_IN_US,
+				.delay = ATLAS_PH_INT_TIME_IN_MS,
 	},
 	[ATLAS_EC_SM] = {
 				.channels = atlas_ec_channels,
 				.num_channels = 5,
 				.data_reg = ATLAS_REG_EC_DATA,
 				.calibration = &atlas_check_ec_calibration,
-				.delay = ATLAS_EC_INT_TIME_IN_US,
+				.delay = ATLAS_EC_INT_TIME_IN_MS,
 	},
 	[ATLAS_ORP_SM] = {
 				.channels = atlas_orp_channels,
 				.num_channels = 2,
 				.data_reg = ATLAS_REG_ORP_DATA,
 				.calibration = &atlas_check_orp_calibration,
-				.delay = ATLAS_ORP_INT_TIME_IN_US,
+				.delay = ATLAS_ORP_INT_TIME_IN_MS,
 	},
 };
 
@@ -393,7 +393,7 @@ static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val)
 	}
 
 	if (suspended)
-		usleep_range(data->chip->delay, data->chip->delay + 100000);
+		msleep(data->chip->delay);
 
 	ret = regmap_bulk_read(data->regmap, reg, (u8 *) val, sizeof(*val));
 
-- 
2.14.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH] iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays
  2018-04-10  6:18 [PATCH] iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays Matt Ranostay
@ 2018-04-12  1:25 ` Nicholas Mc Guire
  2018-04-12  3:52   ` Matt Ranostay
  0 siblings, 1 reply; 4+ messages in thread
From: Nicholas Mc Guire @ 2018-04-12  1:25 UTC (permalink / raw)
  To: Matt Ranostay; +Cc: jic23, linux-iio, Nicholas Mc Guire

On Mon, Apr 09, 2018 at 11:18:22PM -0700, Matt Ranostay wrote:
> usleep_range() uses hrtimers and provides no advantage over msleep()
> for larger delays.
>

As the ATLAS_*_INT_TIME_IN_MS delays here are used exclusively for the 
usleep_ranges in the sustepnd case I guess that transformation is fine.
 
> Cc: Nicholas Mc Guire <hofrat@osadl.org>
> Link: http://lkml.org/lkml/2017/1/11/377
> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org>

> ---
>  drivers/iio/chemical/atlas-ph-sensor.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c
> index abfc4bbc4cfc..a406ad31b096 100644
> --- a/drivers/iio/chemical/atlas-ph-sensor.c
> +++ b/drivers/iio/chemical/atlas-ph-sensor.c
> @@ -61,9 +61,9 @@
>  #define ATLAS_REG_ORP_CALIB_STATUS	0x0d
>  #define ATLAS_REG_ORP_DATA		0x0e
>  
> -#define ATLAS_PH_INT_TIME_IN_US		450000
> -#define ATLAS_EC_INT_TIME_IN_US		650000
> -#define ATLAS_ORP_INT_TIME_IN_US	450000
> +#define ATLAS_PH_INT_TIME_IN_MS		450
> +#define ATLAS_EC_INT_TIME_IN_MS		650
> +#define ATLAS_ORP_INT_TIME_IN_MS	450
>  
>  enum {
>  	ATLAS_PH_SM,
> @@ -270,21 +270,21 @@ static struct atlas_device atlas_devices[] = {
>  				.num_channels = 3,
>  				.data_reg = ATLAS_REG_PH_DATA,
>  				.calibration = &atlas_check_ph_calibration,
> -				.delay = ATLAS_PH_INT_TIME_IN_US,
> +				.delay = ATLAS_PH_INT_TIME_IN_MS,
>  	},
>  	[ATLAS_EC_SM] = {
>  				.channels = atlas_ec_channels,
>  				.num_channels = 5,
>  				.data_reg = ATLAS_REG_EC_DATA,
>  				.calibration = &atlas_check_ec_calibration,
> -				.delay = ATLAS_EC_INT_TIME_IN_US,
> +				.delay = ATLAS_EC_INT_TIME_IN_MS,
>  	},
>  	[ATLAS_ORP_SM] = {
>  				.channels = atlas_orp_channels,
>  				.num_channels = 2,
>  				.data_reg = ATLAS_REG_ORP_DATA,
>  				.calibration = &atlas_check_orp_calibration,
> -				.delay = ATLAS_ORP_INT_TIME_IN_US,
> +				.delay = ATLAS_ORP_INT_TIME_IN_MS,
>  	},
>  };
>  
> @@ -393,7 +393,7 @@ static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val)
>  	}
>  
>  	if (suspended)
> -		usleep_range(data->chip->delay, data->chip->delay + 100000);
> +		msleep(data->chip->delay);
>  
>  	ret = regmap_bulk_read(data->regmap, reg, (u8 *) val, sizeof(*val));
>  
> -- 
> 2.14.1
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays
  2018-04-12  1:25 ` Nicholas Mc Guire
@ 2018-04-12  3:52   ` Matt Ranostay
  2018-04-15 17:38     ` Jonathan Cameron
  0 siblings, 1 reply; 4+ messages in thread
From: Matt Ranostay @ 2018-04-12  3:52 UTC (permalink / raw)
  To: Nicholas Mc Guire; +Cc: Jonathan Cameron, linux-iio, Nicholas Mc Guire

On Wed, Apr 11, 2018 at 6:25 PM, Nicholas Mc Guire <der.herr@hofr.at> wrote:
> On Mon, Apr 09, 2018 at 11:18:22PM -0700, Matt Ranostay wrote:
>> usleep_range() uses hrtimers and provides no advantage over msleep()
>> for larger delays.
>>
>
> As the ATLAS_*_INT_TIME_IN_MS delays here are used exclusively for the
> usleep_ranges in the sustepnd case I guess that transformation is fine.

Yeah only reason I submitted it. Probably a bit pedantic I'll admit :)

>
>> Cc: Nicholas Mc Guire <hofrat@osadl.org>
>> Link: http://lkml.org/lkml/2017/1/11/377
>> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
> Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org>
>
>> ---
>>  drivers/iio/chemical/atlas-ph-sensor.c | 14 +++++++-------
>>  1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c
>> index abfc4bbc4cfc..a406ad31b096 100644
>> --- a/drivers/iio/chemical/atlas-ph-sensor.c
>> +++ b/drivers/iio/chemical/atlas-ph-sensor.c
>> @@ -61,9 +61,9 @@
>>  #define ATLAS_REG_ORP_CALIB_STATUS   0x0d
>>  #define ATLAS_REG_ORP_DATA           0x0e
>>
>> -#define ATLAS_PH_INT_TIME_IN_US              450000
>> -#define ATLAS_EC_INT_TIME_IN_US              650000
>> -#define ATLAS_ORP_INT_TIME_IN_US     450000
>> +#define ATLAS_PH_INT_TIME_IN_MS              450
>> +#define ATLAS_EC_INT_TIME_IN_MS              650
>> +#define ATLAS_ORP_INT_TIME_IN_MS     450
>>
>>  enum {
>>       ATLAS_PH_SM,
>> @@ -270,21 +270,21 @@ static struct atlas_device atlas_devices[] = {
>>                               .num_channels = 3,
>>                               .data_reg = ATLAS_REG_PH_DATA,
>>                               .calibration = &atlas_check_ph_calibration,
>> -                             .delay = ATLAS_PH_INT_TIME_IN_US,
>> +                             .delay = ATLAS_PH_INT_TIME_IN_MS,
>>       },
>>       [ATLAS_EC_SM] = {
>>                               .channels = atlas_ec_channels,
>>                               .num_channels = 5,
>>                               .data_reg = ATLAS_REG_EC_DATA,
>>                               .calibration = &atlas_check_ec_calibration,
>> -                             .delay = ATLAS_EC_INT_TIME_IN_US,
>> +                             .delay = ATLAS_EC_INT_TIME_IN_MS,
>>       },
>>       [ATLAS_ORP_SM] = {
>>                               .channels = atlas_orp_channels,
>>                               .num_channels = 2,
>>                               .data_reg = ATLAS_REG_ORP_DATA,
>>                               .calibration = &atlas_check_orp_calibration,
>> -                             .delay = ATLAS_ORP_INT_TIME_IN_US,
>> +                             .delay = ATLAS_ORP_INT_TIME_IN_MS,
>>       },
>>  };
>>
>> @@ -393,7 +393,7 @@ static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val)
>>       }
>>
>>       if (suspended)
>> -             usleep_range(data->chip->delay, data->chip->delay + 100000);
>> +             msleep(data->chip->delay);
>>
>>       ret = regmap_bulk_read(data->regmap, reg, (u8 *) val, sizeof(*val));
>>
>> --
>> 2.14.1
>>

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays
  2018-04-12  3:52   ` Matt Ranostay
@ 2018-04-15 17:38     ` Jonathan Cameron
  0 siblings, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2018-04-15 17:38 UTC (permalink / raw)
  To: Matt Ranostay; +Cc: Nicholas Mc Guire, linux-iio, Nicholas Mc Guire

On Wed, 11 Apr 2018 20:52:49 -0700
Matt Ranostay <matt.ranostay@konsulko.com> wrote:

> On Wed, Apr 11, 2018 at 6:25 PM, Nicholas Mc Guire <der.herr@hofr.at> wrote:
> > On Mon, Apr 09, 2018 at 11:18:22PM -0700, Matt Ranostay wrote:  
> >> usleep_range() uses hrtimers and provides no advantage over msleep()
> >> for larger delays.
> >>  
> >
> > As the ATLAS_*_INT_TIME_IN_MS delays here are used exclusively for the
> > usleep_ranges in the sustepnd case I guess that transformation is fine.  
> 
> Yeah only reason I submitted it. Probably a bit pedantic I'll admit :)
>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play tih it.

Thanks,

Jonathan
 
> >  
> >> Cc: Nicholas Mc Guire <hofrat@osadl.org>
> >> Link: http://lkml.org/lkml/2017/1/11/377
> >> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>  
> > Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org>
> >  
> >> ---
> >>  drivers/iio/chemical/atlas-ph-sensor.c | 14 +++++++-------
> >>  1 file changed, 7 insertions(+), 7 deletions(-)
> >>
> >> diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c
> >> index abfc4bbc4cfc..a406ad31b096 100644
> >> --- a/drivers/iio/chemical/atlas-ph-sensor.c
> >> +++ b/drivers/iio/chemical/atlas-ph-sensor.c
> >> @@ -61,9 +61,9 @@
> >>  #define ATLAS_REG_ORP_CALIB_STATUS   0x0d
> >>  #define ATLAS_REG_ORP_DATA           0x0e
> >>
> >> -#define ATLAS_PH_INT_TIME_IN_US              450000
> >> -#define ATLAS_EC_INT_TIME_IN_US              650000
> >> -#define ATLAS_ORP_INT_TIME_IN_US     450000
> >> +#define ATLAS_PH_INT_TIME_IN_MS              450
> >> +#define ATLAS_EC_INT_TIME_IN_MS              650
> >> +#define ATLAS_ORP_INT_TIME_IN_MS     450
> >>
> >>  enum {
> >>       ATLAS_PH_SM,
> >> @@ -270,21 +270,21 @@ static struct atlas_device atlas_devices[] = {
> >>                               .num_channels = 3,
> >>                               .data_reg = ATLAS_REG_PH_DATA,
> >>                               .calibration = &atlas_check_ph_calibration,
> >> -                             .delay = ATLAS_PH_INT_TIME_IN_US,
> >> +                             .delay = ATLAS_PH_INT_TIME_IN_MS,
> >>       },
> >>       [ATLAS_EC_SM] = {
> >>                               .channels = atlas_ec_channels,
> >>                               .num_channels = 5,
> >>                               .data_reg = ATLAS_REG_EC_DATA,
> >>                               .calibration = &atlas_check_ec_calibration,
> >> -                             .delay = ATLAS_EC_INT_TIME_IN_US,
> >> +                             .delay = ATLAS_EC_INT_TIME_IN_MS,
> >>       },
> >>       [ATLAS_ORP_SM] = {
> >>                               .channels = atlas_orp_channels,
> >>                               .num_channels = 2,
> >>                               .data_reg = ATLAS_REG_ORP_DATA,
> >>                               .calibration = &atlas_check_orp_calibration,
> >> -                             .delay = ATLAS_ORP_INT_TIME_IN_US,
> >> +                             .delay = ATLAS_ORP_INT_TIME_IN_MS,
> >>       },
> >>  };
> >>
> >> @@ -393,7 +393,7 @@ static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val)
> >>       }
> >>
> >>       if (suspended)
> >> -             usleep_range(data->chip->delay, data->chip->delay + 100000);
> >> +             msleep(data->chip->delay);
> >>
> >>       ret = regmap_bulk_read(data->regmap, reg, (u8 *) val, sizeof(*val));
> >>
> >> --
> >> 2.14.1
> >>  


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2018-04-15 17:38 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-10  6:18 [PATCH] iio: chemical: atlas-ph-sensor: use msleep() for long uncritical delays Matt Ranostay
2018-04-12  1:25 ` Nicholas Mc Guire
2018-04-12  3:52   ` Matt Ranostay
2018-04-15 17:38     ` Jonathan Cameron

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.