All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrea Parri <andrea.parri@amarulasolutions.com>
To: Ingo Molnar <mingo@kernel.org>, Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org, linux-arch@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	paulmck@linux.vnet.ibm.com
Subject: Re: [RFC PATCH v2 0/6] Documentation/features: Provide and apply 'features-refresh.sh'
Date: Fri, 20 Apr 2018 19:04:05 +0200	[thread overview]
Message-ID: <20180420170405.GA14509@andrea> (raw)
In-Reply-To: <1523205027-31786-1-git-send-email-andrea.parri@amarulasolutions.com>

Hi Ingo, Jon,

On Sun, Apr 08, 2018 at 06:30:21PM +0200, Andrea Parri wrote:
> Hi,
> 
> This series provides the script 'features-refresh.sh', which operates on
> the arch support status files, and it applies this script to refresh the
> status files in place; previous discussions about this series are at [1].
> 
> The series is organized as follows.
> 
>   - Patch 1/6 adds the script to 'Documentation/features/scripts/'.
> 
>   - Patch 2/6 presents the results of running the script; this run
>     also printed the messages
> 
>        WARNING: 'HAVE_BPF_JIT' is not a valid Kconfig
>        WARNING: '__HAVE_ARCH_STRNCASECMP' is not a valid Kconfig
>        WARNING: 'Optimized asm/rwsem.h' is not a valid Kconfig
>        WARNING: '__HAVE_ARCH_PTE_SPECIAL' is not a valid Kconfig
> 
>     to standard output.
> 
>   - Patches 3-6/6 fix each of these warnings.
> 
> (Applies on today's mainline.)
> 
> Cheers,
>   Andrea
> 
> [1] https://marc.info/?l=linux-kernel&m=152223974927255&w=2
>     https://marc.info/?l=linux-kernel&m=152277458614862&w=2
> 
> Changes in v2:
>   - support negation operators in Kconfig (suggested by Ingo Molnar)
>   - reorder patches 2/6 and 3/6 (suggested by Ingo Molnar)
>   - add patches 4-6/6 (suggested by Ingo Molnar)
> 
> Andrea Parri (6):
>   Documentation/features: Add script that refreshes the arch support
>     status files in place
>   Documentation/features: Refresh the arch support status files in place
>   Documentation/features/core: Add arch support status files for
>     'cBPF-JIT' and 'eBPF-JIT'
>   Documentation/features/locking: Use '!RWSEM_GENERIC_SPINLOCK' as
>     Kconfig for 'rwsem-optimized'
>   Documentation/features/lib: Remove arch support status file for
>     'strncasecmp'
>   Documentation/features/vm: Remove arch support status file for
>     'pte_special'

I understand that you didn't get the chance to look into this yet ;D
please let me know if you'd like me to rebase and re-send the series.

Thanks,
  Andrea


> 
>  .../features/core/BPF-JIT/arch-support.txt         | 31 -------
>  .../features/core/cBPF-JIT/arch-support.txt        | 33 ++++++++
>  .../features/core/eBPF-JIT/arch-support.txt        | 33 ++++++++
>  .../core/generic-idle-thread/arch-support.txt      |  4 +-
>  .../features/core/jump-labels/arch-support.txt     |  2 +
>  .../features/core/tracehook/arch-support.txt       |  2 +
>  .../features/debug/KASAN/arch-support.txt          |  4 +-
>  .../debug/gcov-profile-all/arch-support.txt        |  2 +
>  Documentation/features/debug/kgdb/arch-support.txt |  4 +-
>  .../debug/kprobes-on-ftrace/arch-support.txt       |  2 +
>  .../features/debug/kprobes/arch-support.txt        |  4 +-
>  .../features/debug/kretprobes/arch-support.txt     |  4 +-
>  .../features/debug/optprobes/arch-support.txt      |  4 +-
>  .../features/debug/stackprotector/arch-support.txt |  2 +
>  .../features/debug/uprobes/arch-support.txt        |  6 +-
>  .../debug/user-ret-profiler/arch-support.txt       |  2 +
>  .../features/io/dma-api-debug/arch-support.txt     |  2 +
>  .../features/io/dma-contiguous/arch-support.txt    |  4 +-
>  .../features/io/sg-chain/arch-support.txt          |  2 +
>  .../features/lib/strncasecmp/arch-support.txt      | 31 -------
>  .../locking/cmpxchg-local/arch-support.txt         |  4 +-
>  .../features/locking/lockdep/arch-support.txt      |  4 +-
>  .../locking/queued-rwlocks/arch-support.txt        | 10 ++-
>  .../locking/queued-spinlocks/arch-support.txt      |  8 +-
>  .../locking/rwsem-optimized/arch-support.txt       | 10 ++-
>  .../features/perf/kprobes-event/arch-support.txt   |  6 +-
>  .../features/perf/perf-regs/arch-support.txt       |  4 +-
>  .../features/perf/perf-stackdump/arch-support.txt  |  4 +-
>  .../sched/membarrier-sync-core/arch-support.txt    |  2 +
>  .../features/sched/numa-balancing/arch-support.txt |  6 +-
>  Documentation/features/scripts/features-refresh.sh | 98 ++++++++++++++++++++++
>  .../seccomp/seccomp-filter/arch-support.txt        |  6 +-
>  .../time/arch-tick-broadcast/arch-support.txt      |  4 +-
>  .../features/time/clockevents/arch-support.txt     |  4 +-
>  .../time/context-tracking/arch-support.txt         |  2 +
>  .../features/time/irq-time-acct/arch-support.txt   |  4 +-
>  .../time/modern-timekeeping/arch-support.txt       |  2 +
>  .../features/time/virt-cpuacct/arch-support.txt    |  2 +
>  .../features/vm/ELF-ASLR/arch-support.txt          |  4 +-
>  .../features/vm/PG_uncached/arch-support.txt       |  2 +
>  Documentation/features/vm/THP/arch-support.txt     |  2 +
>  Documentation/features/vm/TLB/arch-support.txt     |  2 +
>  .../features/vm/huge-vmap/arch-support.txt         |  2 +
>  .../features/vm/ioremap_prot/arch-support.txt      |  2 +
>  .../features/vm/numa-memblock/arch-support.txt     |  4 +-
>  .../features/vm/pte_special/arch-support.txt       | 31 -------
>  46 files changed, 279 insertions(+), 128 deletions(-)
>  delete mode 100644 Documentation/features/core/BPF-JIT/arch-support.txt
>  create mode 100644 Documentation/features/core/cBPF-JIT/arch-support.txt
>  create mode 100644 Documentation/features/core/eBPF-JIT/arch-support.txt
>  delete mode 100644 Documentation/features/lib/strncasecmp/arch-support.txt
>  create mode 100755 Documentation/features/scripts/features-refresh.sh
>  delete mode 100644 Documentation/features/vm/pte_special/arch-support.txt
> 
> -- 
> 2.7.4
> 

WARNING: multiple messages have this Message-ID (diff)
From: Andrea Parri <andrea.parri@amarulasolutions.com>
To: Ingo Molnar <mingo@kernel.org>, Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org, linux-arch@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	paulmck@linux.vnet.ibm.com
Subject: Re: [RFC PATCH v2 0/6] Documentation/features: Provide and apply 'features-refresh.sh'
Date: Fri, 20 Apr 2018 19:04:05 +0200	[thread overview]
Message-ID: <20180420170405.GA14509@andrea> (raw)
In-Reply-To: <1523205027-31786-1-git-send-email-andrea.parri@amarulasolutions.com>

Hi Ingo, Jon,

On Sun, Apr 08, 2018 at 06:30:21PM +0200, Andrea Parri wrote:
> Hi,
> 
> This series provides the script 'features-refresh.sh', which operates on
> the arch support status files, and it applies this script to refresh the
> status files in place; previous discussions about this series are at [1].
> 
> The series is organized as follows.
> 
>   - Patch 1/6 adds the script to 'Documentation/features/scripts/'.
> 
>   - Patch 2/6 presents the results of running the script; this run
>     also printed the messages
> 
>        WARNING: 'HAVE_BPF_JIT' is not a valid Kconfig
>        WARNING: '__HAVE_ARCH_STRNCASECMP' is not a valid Kconfig
>        WARNING: 'Optimized asm/rwsem.h' is not a valid Kconfig
>        WARNING: '__HAVE_ARCH_PTE_SPECIAL' is not a valid Kconfig
> 
>     to standard output.
> 
>   - Patches 3-6/6 fix each of these warnings.
> 
> (Applies on today's mainline.)
> 
> Cheers,
>   Andrea
> 
> [1] https://marc.info/?l=linux-kernel&m=152223974927255&w=2
>     https://marc.info/?l=linux-kernel&m=152277458614862&w=2
> 
> Changes in v2:
>   - support negation operators in Kconfig (suggested by Ingo Molnar)
>   - reorder patches 2/6 and 3/6 (suggested by Ingo Molnar)
>   - add patches 4-6/6 (suggested by Ingo Molnar)
> 
> Andrea Parri (6):
>   Documentation/features: Add script that refreshes the arch support
>     status files in place
>   Documentation/features: Refresh the arch support status files in place
>   Documentation/features/core: Add arch support status files for
>     'cBPF-JIT' and 'eBPF-JIT'
>   Documentation/features/locking: Use '!RWSEM_GENERIC_SPINLOCK' as
>     Kconfig for 'rwsem-optimized'
>   Documentation/features/lib: Remove arch support status file for
>     'strncasecmp'
>   Documentation/features/vm: Remove arch support status file for
>     'pte_special'

I understand that you didn't get the chance to look into this yet ;D
please let me know if you'd like me to rebase and re-send the series.

Thanks,
  Andrea


> 
>  .../features/core/BPF-JIT/arch-support.txt         | 31 -------
>  .../features/core/cBPF-JIT/arch-support.txt        | 33 ++++++++
>  .../features/core/eBPF-JIT/arch-support.txt        | 33 ++++++++
>  .../core/generic-idle-thread/arch-support.txt      |  4 +-
>  .../features/core/jump-labels/arch-support.txt     |  2 +
>  .../features/core/tracehook/arch-support.txt       |  2 +
>  .../features/debug/KASAN/arch-support.txt          |  4 +-
>  .../debug/gcov-profile-all/arch-support.txt        |  2 +
>  Documentation/features/debug/kgdb/arch-support.txt |  4 +-
>  .../debug/kprobes-on-ftrace/arch-support.txt       |  2 +
>  .../features/debug/kprobes/arch-support.txt        |  4 +-
>  .../features/debug/kretprobes/arch-support.txt     |  4 +-
>  .../features/debug/optprobes/arch-support.txt      |  4 +-
>  .../features/debug/stackprotector/arch-support.txt |  2 +
>  .../features/debug/uprobes/arch-support.txt        |  6 +-
>  .../debug/user-ret-profiler/arch-support.txt       |  2 +
>  .../features/io/dma-api-debug/arch-support.txt     |  2 +
>  .../features/io/dma-contiguous/arch-support.txt    |  4 +-
>  .../features/io/sg-chain/arch-support.txt          |  2 +
>  .../features/lib/strncasecmp/arch-support.txt      | 31 -------
>  .../locking/cmpxchg-local/arch-support.txt         |  4 +-
>  .../features/locking/lockdep/arch-support.txt      |  4 +-
>  .../locking/queued-rwlocks/arch-support.txt        | 10 ++-
>  .../locking/queued-spinlocks/arch-support.txt      |  8 +-
>  .../locking/rwsem-optimized/arch-support.txt       | 10 ++-
>  .../features/perf/kprobes-event/arch-support.txt   |  6 +-
>  .../features/perf/perf-regs/arch-support.txt       |  4 +-
>  .../features/perf/perf-stackdump/arch-support.txt  |  4 +-
>  .../sched/membarrier-sync-core/arch-support.txt    |  2 +
>  .../features/sched/numa-balancing/arch-support.txt |  6 +-
>  Documentation/features/scripts/features-refresh.sh | 98 ++++++++++++++++++++++
>  .../seccomp/seccomp-filter/arch-support.txt        |  6 +-
>  .../time/arch-tick-broadcast/arch-support.txt      |  4 +-
>  .../features/time/clockevents/arch-support.txt     |  4 +-
>  .../time/context-tracking/arch-support.txt         |  2 +
>  .../features/time/irq-time-acct/arch-support.txt   |  4 +-
>  .../time/modern-timekeeping/arch-support.txt       |  2 +
>  .../features/time/virt-cpuacct/arch-support.txt    |  2 +
>  .../features/vm/ELF-ASLR/arch-support.txt          |  4 +-
>  .../features/vm/PG_uncached/arch-support.txt       |  2 +
>  Documentation/features/vm/THP/arch-support.txt     |  2 +
>  Documentation/features/vm/TLB/arch-support.txt     |  2 +
>  .../features/vm/huge-vmap/arch-support.txt         |  2 +
>  .../features/vm/ioremap_prot/arch-support.txt      |  2 +
>  .../features/vm/numa-memblock/arch-support.txt     |  4 +-
>  .../features/vm/pte_special/arch-support.txt       | 31 -------
>  46 files changed, 279 insertions(+), 128 deletions(-)
>  delete mode 100644 Documentation/features/core/BPF-JIT/arch-support.txt
>  create mode 100644 Documentation/features/core/cBPF-JIT/arch-support.txt
>  create mode 100644 Documentation/features/core/eBPF-JIT/arch-support.txt
>  delete mode 100644 Documentation/features/lib/strncasecmp/arch-support.txt
>  create mode 100755 Documentation/features/scripts/features-refresh.sh
>  delete mode 100644 Documentation/features/vm/pte_special/arch-support.txt
> 
> -- 
> 2.7.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2018-04-20 17:04 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-08 16:30 [RFC PATCH v2 0/6] Documentation/features: Provide and apply 'features-refresh.sh' Andrea Parri
2018-04-08 16:30 ` Andrea Parri
2018-04-08 16:30 ` [RFC PATCH v2 1/6] Documentation/features: Add script that refreshes the arch support status files in place Andrea Parri
2018-04-08 16:30   ` Andrea Parri
2018-04-08 16:30 ` [RFC PATCH v2 2/6] Documentation/features: Refresh " Andrea Parri
2018-04-08 16:30   ` Andrea Parri
2018-04-08 16:30 ` [RFC PATCH v2 3/6] Documentation/features/core: Add arch support status files for 'cBPF-JIT' and 'eBPF-JIT' Andrea Parri
2018-04-08 16:30   ` Andrea Parri
2018-04-08 16:30 ` [RFC PATCH v2 4/6] Documentation/features/locking: Use '!RWSEM_GENERIC_SPINLOCK' as Kconfig for 'rwsem-optimized' Andrea Parri
2018-04-08 16:30   ` Andrea Parri
2018-04-08 16:30 ` [RFC PATCH v2 5/6] Documentation/features/lib: Remove arch support status file for 'strncasecmp' Andrea Parri
2018-04-08 16:30   ` Andrea Parri
2018-04-08 16:30 ` [RFC PATCH v2 6/6] Documentation/features/vm: Remove arch support status file for 'pte_special' Andrea Parri
2018-04-08 16:30   ` Andrea Parri
2018-04-20 17:04 ` Andrea Parri [this message]
2018-04-20 17:04   ` [RFC PATCH v2 0/6] Documentation/features: Provide and apply 'features-refresh.sh' Andrea Parri

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180420170405.GA14509@andrea \
    --to=andrea.parri@amarulasolutions.com \
    --cc=akpm@linux-foundation.org \
    --cc=corbet@lwn.net \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=paulmck@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.