* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Yixun Lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel, devicetree
This patch try to add AO clock and Reset driver for Amlogic's
Meson-AXG SoC.
Please note that patch 7 need to wait for the DTS changes[3] merged
into mainline first, otherwise it will break the serial console.
patch 2: factor the common code into a dedicated file
patch 3-5: add the aoclk driver for AXG SoC
patch 6-7: drop unnecessary clock flags
changes since v6 at [7]:
- fix over 80 chars chechpatch error
- add Philip's Ack on patch 5
- drop extra end of newline
changes since v5 at [6]:
- drop unnecessary header files
- add 'axg_aoclk' prefix to clk driver, make them more consistent
- add missing end new line..
changes since v4 at [5]:
- fix return err
- introduce CONFIG_COMMON_CLK_MESON_AO
- format/style minor fix
changes since v3 at [4]:
- add 'const' contraint to the read-only data
- switch to devm_of_clk_add_hw_provider API
- check return value of devm_reset_controller_register
changes since v2 at [2]:
- rework meson_aoclkc_probe() which leverage the of_match_data
- merge patch 5-6 into this series
- seperate DTS patch, will send to Kevin Hilman independently
changes since v1 at [0]:
- rebase to clk-meson's branch 'next/drivers' [1]
- fix license, update to BSD-3-Clause
- drop un-used include header file
[0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
[1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
[2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
[3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
[4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com
[5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan@amlogic.com
[6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan@amlogic.com
[7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan@amlogic.com
Qiufang Dai (1):
clk: meson-axg: Add AO Clock and Reset controller driver
Yixun Lan (6):
clk: meson: migrate to devm_of_clk_add_hw_provider API
clk: meson: aoclk: refactor common code into dedicated file
dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
clk: meson: drop CLK_SET_RATE_PARENT flag
clk: meson: drop CLK_IGNORE_UNUSED flag
.../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 3 +-
drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
drivers/clk/meson/axg-aoclk.h | 29 ++++
drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
drivers/clk/meson/gxbb-aoclk.h | 5 +
drivers/clk/meson/meson-aoclk.c | 81 +++++++++
drivers/clk/meson/meson-aoclk.h | 34 ++++
include/dt-bindings/clock/axg-aoclkc.h | 26 +++
include/dt-bindings/reset/axg-aoclkc.h | 20 +++
11 files changed, 401 insertions(+), 64 deletions(-)
create mode 100644 drivers/clk/meson/axg-aoclk.c
create mode 100644 drivers/clk/meson/axg-aoclk.h
create mode 100644 drivers/clk/meson/meson-aoclk.c
create mode 100644 drivers/clk/meson/meson-aoclk.h
create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
--
2.17.0
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Yixun Lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel, devicetree
This patch try to add AO clock and Reset driver for Amlogic's
Meson-AXG SoC.
Please note that patch 7 need to wait for the DTS changes[3] merged
into mainline first, otherwise it will break the serial console.
patch 2: factor the common code into a dedicated file
patch 3-5: add the aoclk driver for AXG SoC
patch 6-7: drop unnecessary clock flags
changes since v6 at [7]:
- fix over 80 chars chechpatch error
- add Philip's Ack on patch 5
- drop extra end of newline
changes since v5 at [6]:
- drop unnecessary header files
- add 'axg_aoclk' prefix to clk driver, make them more consistent
- add missing end new line..
changes since v4 at [5]:
- fix return err
- introduce CONFIG_COMMON_CLK_MESON_AO
- format/style minor fix
changes since v3 at [4]:
- add 'const' contraint to the read-only data
- switch to devm_of_clk_add_hw_provider API
- check return value of devm_reset_controller_register
changes since v2 at [2]:
- rework meson_aoclkc_probe() which leverage the of_match_data
- merge patch 5-6 into this series
- seperate DTS patch, will send to Kevin Hilman independently
changes since v1 at [0]:
- rebase to clk-meson's branch 'next/drivers' [1]
- fix license, update to BSD-3-Clause
- drop un-used include header file
[0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
[1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
[2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
[3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
[4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com
[5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan@amlogic.com
[6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan@amlogic.com
[7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan@amlogic.com
Qiufang Dai (1):
clk: meson-axg: Add AO Clock and Reset controller driver
Yixun Lan (6):
clk: meson: migrate to devm_of_clk_add_hw_provider API
clk: meson: aoclk: refactor common code into dedicated file
dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
clk: meson: drop CLK_SET_RATE_PARENT flag
clk: meson: drop CLK_IGNORE_UNUSED flag
.../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 3 +-
drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
drivers/clk/meson/axg-aoclk.h | 29 ++++
drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
drivers/clk/meson/gxbb-aoclk.h | 5 +
drivers/clk/meson/meson-aoclk.c | 81 +++++++++
drivers/clk/meson/meson-aoclk.h | 34 ++++
include/dt-bindings/clock/axg-aoclkc.h | 26 +++
include/dt-bindings/reset/axg-aoclkc.h | 20 +++
11 files changed, 401 insertions(+), 64 deletions(-)
create mode 100644 drivers/clk/meson/axg-aoclk.c
create mode 100644 drivers/clk/meson/axg-aoclk.h
create mode 100644 drivers/clk/meson/meson-aoclk.c
create mode 100644 drivers/clk/meson/meson-aoclk.h
create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
--
2.17.0
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linux-arm-kernel
This patch try to add AO clock and Reset driver for Amlogic's
Meson-AXG SoC.
Please note that patch 7 need to wait for the DTS changes[3] merged
into mainline first, otherwise it will break the serial console.
patch 2: factor the common code into a dedicated file
patch 3-5: add the aoclk driver for AXG SoC
patch 6-7: drop unnecessary clock flags
changes since v6 at [7]:
- fix over 80 chars chechpatch error
- add Philip's Ack on patch 5
- drop extra end of newline
changes since v5 at [6]:
- drop unnecessary header files
- add 'axg_aoclk' prefix to clk driver, make them more consistent
- add missing end new line..
changes since v4 at [5]:
- fix return err
- introduce CONFIG_COMMON_CLK_MESON_AO
- format/style minor fix
changes since v3 at [4]:
- add 'const' contraint to the read-only data
- switch to devm_of_clk_add_hw_provider API
- check return value of devm_reset_controller_register
changes since v2 at [2]:
- rework meson_aoclkc_probe() which leverage the of_match_data
- merge patch 5-6 into this series
- seperate DTS patch, will send to Kevin Hilman independently
changes since v1 at [0]:
- rebase to clk-meson's branch 'next/drivers' [1]
- fix license, update to BSD-3-Clause
- drop un-used include header file
[0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
[1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
[2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
[3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
[4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com
[5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan at amlogic.com
[6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan at amlogic.com
[7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan at amlogic.com
Qiufang Dai (1):
clk: meson-axg: Add AO Clock and Reset controller driver
Yixun Lan (6):
clk: meson: migrate to devm_of_clk_add_hw_provider API
clk: meson: aoclk: refactor common code into dedicated file
dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
clk: meson: drop CLK_SET_RATE_PARENT flag
clk: meson: drop CLK_IGNORE_UNUSED flag
.../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 3 +-
drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
drivers/clk/meson/axg-aoclk.h | 29 ++++
drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
drivers/clk/meson/gxbb-aoclk.h | 5 +
drivers/clk/meson/meson-aoclk.c | 81 +++++++++
drivers/clk/meson/meson-aoclk.h | 34 ++++
include/dt-bindings/clock/axg-aoclkc.h | 26 +++
include/dt-bindings/reset/axg-aoclkc.h | 20 +++
11 files changed, 401 insertions(+), 64 deletions(-)
create mode 100644 drivers/clk/meson/axg-aoclk.c
create mode 100644 drivers/clk/meson/axg-aoclk.h
create mode 100644 drivers/clk/meson/meson-aoclk.c
create mode 100644 drivers/clk/meson/meson-aoclk.h
create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
--
2.17.0
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linus-amlogic
This patch try to add AO clock and Reset driver for Amlogic's
Meson-AXG SoC.
Please note that patch 7 need to wait for the DTS changes[3] merged
into mainline first, otherwise it will break the serial console.
patch 2: factor the common code into a dedicated file
patch 3-5: add the aoclk driver for AXG SoC
patch 6-7: drop unnecessary clock flags
changes since v6 at [7]:
- fix over 80 chars chechpatch error
- add Philip's Ack on patch 5
- drop extra end of newline
changes since v5 at [6]:
- drop unnecessary header files
- add 'axg_aoclk' prefix to clk driver, make them more consistent
- add missing end new line..
changes since v4 at [5]:
- fix return err
- introduce CONFIG_COMMON_CLK_MESON_AO
- format/style minor fix
changes since v3 at [4]:
- add 'const' contraint to the read-only data
- switch to devm_of_clk_add_hw_provider API
- check return value of devm_reset_controller_register
changes since v2 at [2]:
- rework meson_aoclkc_probe() which leverage the of_match_data
- merge patch 5-6 into this series
- seperate DTS patch, will send to Kevin Hilman independently
changes since v1 at [0]:
- rebase to clk-meson's branch 'next/drivers' [1]
- fix license, update to BSD-3-Clause
- drop un-used include header file
[0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
[1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
[2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
[3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
[4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com
[5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan at amlogic.com
[6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan at amlogic.com
[7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan at amlogic.com
Qiufang Dai (1):
clk: meson-axg: Add AO Clock and Reset controller driver
Yixun Lan (6):
clk: meson: migrate to devm_of_clk_add_hw_provider API
clk: meson: aoclk: refactor common code into dedicated file
dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
clk: meson: drop CLK_SET_RATE_PARENT flag
clk: meson: drop CLK_IGNORE_UNUSED flag
.../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 3 +-
drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
drivers/clk/meson/axg-aoclk.h | 29 ++++
drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
drivers/clk/meson/gxbb-aoclk.h | 5 +
drivers/clk/meson/meson-aoclk.c | 81 +++++++++
drivers/clk/meson/meson-aoclk.h | 34 ++++
include/dt-bindings/clock/axg-aoclkc.h | 26 +++
include/dt-bindings/reset/axg-aoclkc.h | 20 +++
11 files changed, 401 insertions(+), 64 deletions(-)
create mode 100644 drivers/clk/meson/axg-aoclk.c
create mode 100644 drivers/clk/meson/axg-aoclk.h
create mode 100644 drivers/clk/meson/meson-aoclk.c
create mode 100644 drivers/clk/meson/meson-aoclk.h
create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
--
2.17.0
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 1/7] clk: meson: migrate to devm_of_clk_add_hw_provider API
2018-04-26 8:44 ` Yixun Lan
(?)
@ 2018-04-26 8:44 ` Yixun Lan
-1 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Yixun Lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel
There is a protential memory leak, as of_clk_del_provider is
never called if of_clk_add_hw_provider has been executed.
Fix this by using devm variant API.
Fixes: f8c11f79912d ("clk: meson: Add GXBB AO Clock and Reset controller driver")
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/gxbb-aoclk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index 9ec23ae9a219..eebb580b9e0f 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -191,7 +191,7 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
if (ret)
return ret;
- return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
&gxbb_aoclk_onecell_data);
}
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 1/7] clk: meson: migrate to devm_of_clk_add_hw_provider API
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linux-arm-kernel
There is a protential memory leak, as of_clk_del_provider is
never called if of_clk_add_hw_provider has been executed.
Fix this by using devm variant API.
Fixes: f8c11f79912d ("clk: meson: Add GXBB AO Clock and Reset controller driver")
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/gxbb-aoclk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index 9ec23ae9a219..eebb580b9e0f 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -191,7 +191,7 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
if (ret)
return ret;
- return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
&gxbb_aoclk_onecell_data);
}
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 1/7] clk: meson: migrate to devm_of_clk_add_hw_provider API
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linus-amlogic
There is a protential memory leak, as of_clk_del_provider is
never called if of_clk_add_hw_provider has been executed.
Fix this by using devm variant API.
Fixes: f8c11f79912d ("clk: meson: Add GXBB AO Clock and Reset controller driver")
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/gxbb-aoclk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index 9ec23ae9a219..eebb580b9e0f 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -191,7 +191,7 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
if (ret)
return ret;
- return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
&gxbb_aoclk_onecell_data);
}
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 2/7] clk: meson: aoclk: refactor common code into dedicated file
2018-04-26 8:44 ` Yixun Lan
(?)
@ 2018-04-26 8:44 ` Yixun Lan
-1 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Yixun Lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel
We try to refactor the common code into one dedicated file,
while preparing to add new Meson-AXG aoclk driver, this would
help us to better share the code by all aoclk drivers.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/Kconfig | 7 +++
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/gxbb-aoclk.c | 94 +++++++++++----------------------
drivers/clk/meson/gxbb-aoclk.h | 5 ++
drivers/clk/meson/meson-aoclk.c | 81 ++++++++++++++++++++++++++++
drivers/clk/meson/meson-aoclk.h | 34 ++++++++++++
6 files changed, 160 insertions(+), 62 deletions(-)
create mode 100644 drivers/clk/meson/meson-aoclk.c
create mode 100644 drivers/clk/meson/meson-aoclk.h
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index d5cbec522aec..fddc7ec7b820 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC
depends on OF
depends on ARCH_MESON || COMPILE_TEST
+config COMMON_CLK_MESON_AO
+ bool
+ depends on OF
+ depends on ARCH_MESON || COMPILE_TEST
+ select COMMON_CLK_REGMAP_MESON
+
config COMMON_CLK_REGMAP_MESON
bool
select REGMAP
@@ -21,6 +27,7 @@ config COMMON_CLK_GXBB
bool
depends on COMMON_CLK_AMLOGIC
select RESET_CONTROLLER
+ select COMMON_CLK_MESON_AO
select COMMON_CLK_REGMAP_MESON
select MFD_SYSCON
help
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index ffee82e60b7a..0a8df284f4e7 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
+obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index eebb580b9e0f..20f73e0d82a4 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -52,39 +52,12 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <linux/clk-provider.h>
-#include <linux/of_address.h>
#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <dt-bindings/clock/gxbb-aoclkc.h>
-#include <dt-bindings/reset/gxbb-aoclkc.h>
#include "clk-regmap.h"
+#include "meson-aoclk.h"
#include "gxbb-aoclk.h"
-struct gxbb_aoclk_reset_controller {
- struct reset_controller_dev reset;
- unsigned int *data;
- struct regmap *regmap;
-};
-
-static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- struct gxbb_aoclk_reset_controller *reset =
- container_of(rcdev, struct gxbb_aoclk_reset_controller, reset);
-
- return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0,
- BIT(reset->data[id]));
-}
-
-static const struct reset_control_ops gxbb_aoclk_reset_ops = {
- .reset = gxbb_aoclk_do_reset,
-};
-
#define GXBB_AO_GATE(_name, _bit) \
static struct clk_regmap _name##_ao = { \
.data = &(struct clk_regmap_gate_data) { \
@@ -117,7 +90,7 @@ static struct aoclk_cec_32k cec_32k_ao = {
},
};
-static unsigned int gxbb_aoclk_reset[] = {
+static const unsigned int gxbb_aoclk_reset[] = {
[RESET_AO_REMOTE] = 16,
[RESET_AO_I2C_MASTER] = 18,
[RESET_AO_I2C_SLAVE] = 19,
@@ -135,7 +108,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = {
[CLKID_AO_IR_BLASTER] = &ir_blaster_ao,
};
-static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
+static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
.hws = {
[CLKID_AO_REMOTE] = &remote_ao.hw,
[CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
@@ -145,58 +118,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
[CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
[CLKID_AO_CEC_32K] = &cec_32k_ao.hw,
},
- .num = 7,
+ .num = NR_CLKS,
};
-static int gxbb_aoclkc_probe(struct platform_device *pdev)
+static int gxbb_register_cec_ao_32k(struct platform_device *pdev)
{
- struct gxbb_aoclk_reset_controller *rstc;
struct device *dev = &pdev->dev;
struct regmap *regmap;
- int ret, clkid;
-
- rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
- if (!rstc)
- return -ENOMEM;
+ int ret;
regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
if (IS_ERR(regmap)) {
dev_err(dev, "failed to get regmap\n");
- return -ENODEV;
- }
-
- /* Reset Controller */
- rstc->regmap = regmap;
- rstc->data = gxbb_aoclk_reset;
- rstc->reset.ops = &gxbb_aoclk_reset_ops;
- rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset);
- rstc->reset.of_node = dev->of_node;
- ret = devm_reset_controller_register(dev, &rstc->reset);
-
- /*
- * Populate regmap and register all clks
- */
- for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) {
- gxbb_aoclk_gate[clkid]->map = regmap;
-
- ret = devm_clk_hw_register(dev,
- gxbb_aoclk_onecell_data.hws[clkid]);
- if (ret)
- return ret;
+ return PTR_ERR(regmap);
}
/* Specific clocks */
cec_32k_ao.regmap = regmap;
ret = devm_clk_hw_register(dev, &cec_32k_ao.hw);
+ if (ret) {
+ dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct meson_aoclk_data gxbb_aoclkc_data = {
+ .reset_reg = AO_RTI_GEN_CNTL_REG0,
+ .num_reset = ARRAY_SIZE(gxbb_aoclk_reset),
+ .reset = gxbb_aoclk_reset,
+ .num_clks = ARRAY_SIZE(gxbb_aoclk_gate),
+ .clks = gxbb_aoclk_gate,
+ .hw_data = &gxbb_aoclk_onecell_data,
+};
+
+static int gxbb_aoclkc_probe(struct platform_device *pdev)
+{
+ int ret = gxbb_register_cec_ao_32k(pdev);
if (ret)
return ret;
- return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
- &gxbb_aoclk_onecell_data);
+ return meson_aoclkc_probe(pdev);
}
static const struct of_device_id gxbb_aoclkc_match_table[] = {
- { .compatible = "amlogic,meson-gx-aoclkc" },
+ {
+ .compatible = "amlogic,meson-gx-aoclkc",
+ .data = &gxbb_aoclkc_data,
+ },
{ }
};
diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
index badc4c22b4ee..6e7fa4134a00 100644
--- a/drivers/clk/meson/gxbb-aoclk.h
+++ b/drivers/clk/meson/gxbb-aoclk.h
@@ -8,6 +8,8 @@
#ifndef __GXBB_AOCLKC_H
#define __GXBB_AOCLKC_H
+#define NR_CLKS 7
+
/* AO Configuration Clock registers offsets */
#define AO_RTI_PWR_CNTL_REG1 0x0c
#define AO_RTI_PWR_CNTL_REG0 0x10
@@ -26,4 +28,7 @@ struct aoclk_cec_32k {
extern const struct clk_ops meson_aoclk_cec_32k_ops;
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
+
#endif /* __GXBB_AOCLKC_H */
diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c
new file mode 100644
index 000000000000..f965845917e3
--- /dev/null
+++ b/drivers/clk/meson/meson-aoclk.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include "clk-regmap.h"
+#include "meson-aoclk.h"
+
+static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct meson_aoclk_reset_controller *rstc =
+ container_of(rcdev, struct meson_aoclk_reset_controller, reset);
+
+ return regmap_write(rstc->regmap, rstc->data->reset_reg,
+ BIT(rstc->data->reset[id]));
+}
+
+static const struct reset_control_ops meson_aoclk_reset_ops = {
+ .reset = meson_aoclk_do_reset,
+};
+
+int meson_aoclkc_probe(struct platform_device *pdev)
+{
+ struct meson_aoclk_reset_controller *rstc;
+ struct meson_aoclk_data *data;
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ int ret, clkid;
+
+ data = (struct meson_aoclk_data *) of_device_get_match_data(dev);
+ if (!data)
+ return -ENODEV;
+
+ rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
+ if (!rstc)
+ return -ENOMEM;
+
+ regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to get regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ /* Reset Controller */
+ rstc->data = data;
+ rstc->regmap = regmap;
+ rstc->reset.ops = &meson_aoclk_reset_ops;
+ rstc->reset.nr_resets = data->num_reset,
+ rstc->reset.of_node = dev->of_node;
+ ret = devm_reset_controller_register(dev, &rstc->reset);
+ if (ret) {
+ dev_err(dev, "failed to register reset controller\n");
+ return ret;
+ }
+
+ /*
+ * Populate regmap and register all clks
+ */
+ for (clkid = 0; clkid < data->num_clks; clkid++) {
+ data->clks[clkid]->map = regmap;
+
+ ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]);
+ if (ret)
+ return ret;
+ }
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ (void *) data->hw_data);
+}
diff --git a/drivers/clk/meson/meson-aoclk.h b/drivers/clk/meson/meson-aoclk.h
new file mode 100644
index 000000000000..ab2819e88922
--- /dev/null
+++ b/drivers/clk/meson/meson-aoclk.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ */
+
+#ifndef __MESON_AOCLK_H__
+#define __MESON_AOCLK_H__
+
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include "clk-regmap.h"
+
+struct meson_aoclk_data {
+ const unsigned int reset_reg;
+ const int num_reset;
+ const unsigned int *reset;
+ int num_clks;
+ struct clk_regmap **clks;
+ const struct clk_hw_onecell_data *hw_data;
+};
+
+struct meson_aoclk_reset_controller {
+ struct reset_controller_dev reset;
+ const struct meson_aoclk_data *data;
+ struct regmap *regmap;
+};
+
+int meson_aoclkc_probe(struct platform_device *pdev);
+#endif
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 2/7] clk: meson: aoclk: refactor common code into dedicated file
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linux-arm-kernel
We try to refactor the common code into one dedicated file,
while preparing to add new Meson-AXG aoclk driver, this would
help us to better share the code by all aoclk drivers.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/Kconfig | 7 +++
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/gxbb-aoclk.c | 94 +++++++++++----------------------
drivers/clk/meson/gxbb-aoclk.h | 5 ++
drivers/clk/meson/meson-aoclk.c | 81 ++++++++++++++++++++++++++++
drivers/clk/meson/meson-aoclk.h | 34 ++++++++++++
6 files changed, 160 insertions(+), 62 deletions(-)
create mode 100644 drivers/clk/meson/meson-aoclk.c
create mode 100644 drivers/clk/meson/meson-aoclk.h
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index d5cbec522aec..fddc7ec7b820 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC
depends on OF
depends on ARCH_MESON || COMPILE_TEST
+config COMMON_CLK_MESON_AO
+ bool
+ depends on OF
+ depends on ARCH_MESON || COMPILE_TEST
+ select COMMON_CLK_REGMAP_MESON
+
config COMMON_CLK_REGMAP_MESON
bool
select REGMAP
@@ -21,6 +27,7 @@ config COMMON_CLK_GXBB
bool
depends on COMMON_CLK_AMLOGIC
select RESET_CONTROLLER
+ select COMMON_CLK_MESON_AO
select COMMON_CLK_REGMAP_MESON
select MFD_SYSCON
help
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index ffee82e60b7a..0a8df284f4e7 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
+obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index eebb580b9e0f..20f73e0d82a4 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -52,39 +52,12 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <linux/clk-provider.h>
-#include <linux/of_address.h>
#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <dt-bindings/clock/gxbb-aoclkc.h>
-#include <dt-bindings/reset/gxbb-aoclkc.h>
#include "clk-regmap.h"
+#include "meson-aoclk.h"
#include "gxbb-aoclk.h"
-struct gxbb_aoclk_reset_controller {
- struct reset_controller_dev reset;
- unsigned int *data;
- struct regmap *regmap;
-};
-
-static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- struct gxbb_aoclk_reset_controller *reset =
- container_of(rcdev, struct gxbb_aoclk_reset_controller, reset);
-
- return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0,
- BIT(reset->data[id]));
-}
-
-static const struct reset_control_ops gxbb_aoclk_reset_ops = {
- .reset = gxbb_aoclk_do_reset,
-};
-
#define GXBB_AO_GATE(_name, _bit) \
static struct clk_regmap _name##_ao = { \
.data = &(struct clk_regmap_gate_data) { \
@@ -117,7 +90,7 @@ static struct aoclk_cec_32k cec_32k_ao = {
},
};
-static unsigned int gxbb_aoclk_reset[] = {
+static const unsigned int gxbb_aoclk_reset[] = {
[RESET_AO_REMOTE] = 16,
[RESET_AO_I2C_MASTER] = 18,
[RESET_AO_I2C_SLAVE] = 19,
@@ -135,7 +108,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = {
[CLKID_AO_IR_BLASTER] = &ir_blaster_ao,
};
-static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
+static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
.hws = {
[CLKID_AO_REMOTE] = &remote_ao.hw,
[CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
@@ -145,58 +118,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
[CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
[CLKID_AO_CEC_32K] = &cec_32k_ao.hw,
},
- .num = 7,
+ .num = NR_CLKS,
};
-static int gxbb_aoclkc_probe(struct platform_device *pdev)
+static int gxbb_register_cec_ao_32k(struct platform_device *pdev)
{
- struct gxbb_aoclk_reset_controller *rstc;
struct device *dev = &pdev->dev;
struct regmap *regmap;
- int ret, clkid;
-
- rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
- if (!rstc)
- return -ENOMEM;
+ int ret;
regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
if (IS_ERR(regmap)) {
dev_err(dev, "failed to get regmap\n");
- return -ENODEV;
- }
-
- /* Reset Controller */
- rstc->regmap = regmap;
- rstc->data = gxbb_aoclk_reset;
- rstc->reset.ops = &gxbb_aoclk_reset_ops;
- rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset);
- rstc->reset.of_node = dev->of_node;
- ret = devm_reset_controller_register(dev, &rstc->reset);
-
- /*
- * Populate regmap and register all clks
- */
- for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) {
- gxbb_aoclk_gate[clkid]->map = regmap;
-
- ret = devm_clk_hw_register(dev,
- gxbb_aoclk_onecell_data.hws[clkid]);
- if (ret)
- return ret;
+ return PTR_ERR(regmap);
}
/* Specific clocks */
cec_32k_ao.regmap = regmap;
ret = devm_clk_hw_register(dev, &cec_32k_ao.hw);
+ if (ret) {
+ dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct meson_aoclk_data gxbb_aoclkc_data = {
+ .reset_reg = AO_RTI_GEN_CNTL_REG0,
+ .num_reset = ARRAY_SIZE(gxbb_aoclk_reset),
+ .reset = gxbb_aoclk_reset,
+ .num_clks = ARRAY_SIZE(gxbb_aoclk_gate),
+ .clks = gxbb_aoclk_gate,
+ .hw_data = &gxbb_aoclk_onecell_data,
+};
+
+static int gxbb_aoclkc_probe(struct platform_device *pdev)
+{
+ int ret = gxbb_register_cec_ao_32k(pdev);
if (ret)
return ret;
- return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
- &gxbb_aoclk_onecell_data);
+ return meson_aoclkc_probe(pdev);
}
static const struct of_device_id gxbb_aoclkc_match_table[] = {
- { .compatible = "amlogic,meson-gx-aoclkc" },
+ {
+ .compatible = "amlogic,meson-gx-aoclkc",
+ .data = &gxbb_aoclkc_data,
+ },
{ }
};
diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
index badc4c22b4ee..6e7fa4134a00 100644
--- a/drivers/clk/meson/gxbb-aoclk.h
+++ b/drivers/clk/meson/gxbb-aoclk.h
@@ -8,6 +8,8 @@
#ifndef __GXBB_AOCLKC_H
#define __GXBB_AOCLKC_H
+#define NR_CLKS 7
+
/* AO Configuration Clock registers offsets */
#define AO_RTI_PWR_CNTL_REG1 0x0c
#define AO_RTI_PWR_CNTL_REG0 0x10
@@ -26,4 +28,7 @@ struct aoclk_cec_32k {
extern const struct clk_ops meson_aoclk_cec_32k_ops;
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
+
#endif /* __GXBB_AOCLKC_H */
diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c
new file mode 100644
index 000000000000..f965845917e3
--- /dev/null
+++ b/drivers/clk/meson/meson-aoclk.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include "clk-regmap.h"
+#include "meson-aoclk.h"
+
+static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct meson_aoclk_reset_controller *rstc =
+ container_of(rcdev, struct meson_aoclk_reset_controller, reset);
+
+ return regmap_write(rstc->regmap, rstc->data->reset_reg,
+ BIT(rstc->data->reset[id]));
+}
+
+static const struct reset_control_ops meson_aoclk_reset_ops = {
+ .reset = meson_aoclk_do_reset,
+};
+
+int meson_aoclkc_probe(struct platform_device *pdev)
+{
+ struct meson_aoclk_reset_controller *rstc;
+ struct meson_aoclk_data *data;
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ int ret, clkid;
+
+ data = (struct meson_aoclk_data *) of_device_get_match_data(dev);
+ if (!data)
+ return -ENODEV;
+
+ rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
+ if (!rstc)
+ return -ENOMEM;
+
+ regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to get regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ /* Reset Controller */
+ rstc->data = data;
+ rstc->regmap = regmap;
+ rstc->reset.ops = &meson_aoclk_reset_ops;
+ rstc->reset.nr_resets = data->num_reset,
+ rstc->reset.of_node = dev->of_node;
+ ret = devm_reset_controller_register(dev, &rstc->reset);
+ if (ret) {
+ dev_err(dev, "failed to register reset controller\n");
+ return ret;
+ }
+
+ /*
+ * Populate regmap and register all clks
+ */
+ for (clkid = 0; clkid < data->num_clks; clkid++) {
+ data->clks[clkid]->map = regmap;
+
+ ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]);
+ if (ret)
+ return ret;
+ }
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ (void *) data->hw_data);
+}
diff --git a/drivers/clk/meson/meson-aoclk.h b/drivers/clk/meson/meson-aoclk.h
new file mode 100644
index 000000000000..ab2819e88922
--- /dev/null
+++ b/drivers/clk/meson/meson-aoclk.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ */
+
+#ifndef __MESON_AOCLK_H__
+#define __MESON_AOCLK_H__
+
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include "clk-regmap.h"
+
+struct meson_aoclk_data {
+ const unsigned int reset_reg;
+ const int num_reset;
+ const unsigned int *reset;
+ int num_clks;
+ struct clk_regmap **clks;
+ const struct clk_hw_onecell_data *hw_data;
+};
+
+struct meson_aoclk_reset_controller {
+ struct reset_controller_dev reset;
+ const struct meson_aoclk_data *data;
+ struct regmap *regmap;
+};
+
+int meson_aoclkc_probe(struct platform_device *pdev);
+#endif
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 2/7] clk: meson: aoclk: refactor common code into dedicated file
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linus-amlogic
We try to refactor the common code into one dedicated file,
while preparing to add new Meson-AXG aoclk driver, this would
help us to better share the code by all aoclk drivers.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/Kconfig | 7 +++
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/gxbb-aoclk.c | 94 +++++++++++----------------------
drivers/clk/meson/gxbb-aoclk.h | 5 ++
drivers/clk/meson/meson-aoclk.c | 81 ++++++++++++++++++++++++++++
drivers/clk/meson/meson-aoclk.h | 34 ++++++++++++
6 files changed, 160 insertions(+), 62 deletions(-)
create mode 100644 drivers/clk/meson/meson-aoclk.c
create mode 100644 drivers/clk/meson/meson-aoclk.h
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index d5cbec522aec..fddc7ec7b820 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC
depends on OF
depends on ARCH_MESON || COMPILE_TEST
+config COMMON_CLK_MESON_AO
+ bool
+ depends on OF
+ depends on ARCH_MESON || COMPILE_TEST
+ select COMMON_CLK_REGMAP_MESON
+
config COMMON_CLK_REGMAP_MESON
bool
select REGMAP
@@ -21,6 +27,7 @@ config COMMON_CLK_GXBB
bool
depends on COMMON_CLK_AMLOGIC
select RESET_CONTROLLER
+ select COMMON_CLK_MESON_AO
select COMMON_CLK_REGMAP_MESON
select MFD_SYSCON
help
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index ffee82e60b7a..0a8df284f4e7 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
+obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index eebb580b9e0f..20f73e0d82a4 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -52,39 +52,12 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <linux/clk-provider.h>
-#include <linux/of_address.h>
#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <dt-bindings/clock/gxbb-aoclkc.h>
-#include <dt-bindings/reset/gxbb-aoclkc.h>
#include "clk-regmap.h"
+#include "meson-aoclk.h"
#include "gxbb-aoclk.h"
-struct gxbb_aoclk_reset_controller {
- struct reset_controller_dev reset;
- unsigned int *data;
- struct regmap *regmap;
-};
-
-static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- struct gxbb_aoclk_reset_controller *reset =
- container_of(rcdev, struct gxbb_aoclk_reset_controller, reset);
-
- return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0,
- BIT(reset->data[id]));
-}
-
-static const struct reset_control_ops gxbb_aoclk_reset_ops = {
- .reset = gxbb_aoclk_do_reset,
-};
-
#define GXBB_AO_GATE(_name, _bit) \
static struct clk_regmap _name##_ao = { \
.data = &(struct clk_regmap_gate_data) { \
@@ -117,7 +90,7 @@ static struct aoclk_cec_32k cec_32k_ao = {
},
};
-static unsigned int gxbb_aoclk_reset[] = {
+static const unsigned int gxbb_aoclk_reset[] = {
[RESET_AO_REMOTE] = 16,
[RESET_AO_I2C_MASTER] = 18,
[RESET_AO_I2C_SLAVE] = 19,
@@ -135,7 +108,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = {
[CLKID_AO_IR_BLASTER] = &ir_blaster_ao,
};
-static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
+static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
.hws = {
[CLKID_AO_REMOTE] = &remote_ao.hw,
[CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
@@ -145,58 +118,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
[CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
[CLKID_AO_CEC_32K] = &cec_32k_ao.hw,
},
- .num = 7,
+ .num = NR_CLKS,
};
-static int gxbb_aoclkc_probe(struct platform_device *pdev)
+static int gxbb_register_cec_ao_32k(struct platform_device *pdev)
{
- struct gxbb_aoclk_reset_controller *rstc;
struct device *dev = &pdev->dev;
struct regmap *regmap;
- int ret, clkid;
-
- rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
- if (!rstc)
- return -ENOMEM;
+ int ret;
regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
if (IS_ERR(regmap)) {
dev_err(dev, "failed to get regmap\n");
- return -ENODEV;
- }
-
- /* Reset Controller */
- rstc->regmap = regmap;
- rstc->data = gxbb_aoclk_reset;
- rstc->reset.ops = &gxbb_aoclk_reset_ops;
- rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset);
- rstc->reset.of_node = dev->of_node;
- ret = devm_reset_controller_register(dev, &rstc->reset);
-
- /*
- * Populate regmap and register all clks
- */
- for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) {
- gxbb_aoclk_gate[clkid]->map = regmap;
-
- ret = devm_clk_hw_register(dev,
- gxbb_aoclk_onecell_data.hws[clkid]);
- if (ret)
- return ret;
+ return PTR_ERR(regmap);
}
/* Specific clocks */
cec_32k_ao.regmap = regmap;
ret = devm_clk_hw_register(dev, &cec_32k_ao.hw);
+ if (ret) {
+ dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct meson_aoclk_data gxbb_aoclkc_data = {
+ .reset_reg = AO_RTI_GEN_CNTL_REG0,
+ .num_reset = ARRAY_SIZE(gxbb_aoclk_reset),
+ .reset = gxbb_aoclk_reset,
+ .num_clks = ARRAY_SIZE(gxbb_aoclk_gate),
+ .clks = gxbb_aoclk_gate,
+ .hw_data = &gxbb_aoclk_onecell_data,
+};
+
+static int gxbb_aoclkc_probe(struct platform_device *pdev)
+{
+ int ret = gxbb_register_cec_ao_32k(pdev);
if (ret)
return ret;
- return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
- &gxbb_aoclk_onecell_data);
+ return meson_aoclkc_probe(pdev);
}
static const struct of_device_id gxbb_aoclkc_match_table[] = {
- { .compatible = "amlogic,meson-gx-aoclkc" },
+ {
+ .compatible = "amlogic,meson-gx-aoclkc",
+ .data = &gxbb_aoclkc_data,
+ },
{ }
};
diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
index badc4c22b4ee..6e7fa4134a00 100644
--- a/drivers/clk/meson/gxbb-aoclk.h
+++ b/drivers/clk/meson/gxbb-aoclk.h
@@ -8,6 +8,8 @@
#ifndef __GXBB_AOCLKC_H
#define __GXBB_AOCLKC_H
+#define NR_CLKS 7
+
/* AO Configuration Clock registers offsets */
#define AO_RTI_PWR_CNTL_REG1 0x0c
#define AO_RTI_PWR_CNTL_REG0 0x10
@@ -26,4 +28,7 @@ struct aoclk_cec_32k {
extern const struct clk_ops meson_aoclk_cec_32k_ops;
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
+
#endif /* __GXBB_AOCLKC_H */
diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c
new file mode 100644
index 000000000000..f965845917e3
--- /dev/null
+++ b/drivers/clk/meson/meson-aoclk.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include "clk-regmap.h"
+#include "meson-aoclk.h"
+
+static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct meson_aoclk_reset_controller *rstc =
+ container_of(rcdev, struct meson_aoclk_reset_controller, reset);
+
+ return regmap_write(rstc->regmap, rstc->data->reset_reg,
+ BIT(rstc->data->reset[id]));
+}
+
+static const struct reset_control_ops meson_aoclk_reset_ops = {
+ .reset = meson_aoclk_do_reset,
+};
+
+int meson_aoclkc_probe(struct platform_device *pdev)
+{
+ struct meson_aoclk_reset_controller *rstc;
+ struct meson_aoclk_data *data;
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ int ret, clkid;
+
+ data = (struct meson_aoclk_data *) of_device_get_match_data(dev);
+ if (!data)
+ return -ENODEV;
+
+ rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
+ if (!rstc)
+ return -ENOMEM;
+
+ regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to get regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ /* Reset Controller */
+ rstc->data = data;
+ rstc->regmap = regmap;
+ rstc->reset.ops = &meson_aoclk_reset_ops;
+ rstc->reset.nr_resets = data->num_reset,
+ rstc->reset.of_node = dev->of_node;
+ ret = devm_reset_controller_register(dev, &rstc->reset);
+ if (ret) {
+ dev_err(dev, "failed to register reset controller\n");
+ return ret;
+ }
+
+ /*
+ * Populate regmap and register all clks
+ */
+ for (clkid = 0; clkid < data->num_clks; clkid++) {
+ data->clks[clkid]->map = regmap;
+
+ ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]);
+ if (ret)
+ return ret;
+ }
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ (void *) data->hw_data);
+}
diff --git a/drivers/clk/meson/meson-aoclk.h b/drivers/clk/meson/meson-aoclk.h
new file mode 100644
index 000000000000..ab2819e88922
--- /dev/null
+++ b/drivers/clk/meson/meson-aoclk.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ */
+
+#ifndef __MESON_AOCLK_H__
+#define __MESON_AOCLK_H__
+
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include "clk-regmap.h"
+
+struct meson_aoclk_data {
+ const unsigned int reset_reg;
+ const int num_reset;
+ const unsigned int *reset;
+ int num_clks;
+ struct clk_regmap **clks;
+ const struct clk_hw_onecell_data *hw_data;
+};
+
+struct meson_aoclk_reset_controller {
+ struct reset_controller_dev reset;
+ const struct meson_aoclk_data *data;
+ struct regmap *regmap;
+};
+
+int meson_aoclkc_probe(struct platform_device *pdev);
+#endif
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 3/7] dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
2018-04-26 8:44 ` Yixun Lan
(?)
(?)
@ 2018-04-26 8:44 ` Yixun Lan
-1 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Yixun Lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel, devicetree
Update the dt-binding documentation to support new compatible string
for the Amlogic's Meson-AXG SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
index 786dc39ca904..3a880528030e 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -9,6 +9,7 @@ Required Properties:
- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
- GXM (S912) : "amlogic,meson-gxm-aoclkc"
+ - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
followed by the common "amlogic,meson-gx-aoclkc"
- #clock-cells: should be 1.
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 3/7] dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Yixun Lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel, devicetree
Update the dt-binding documentation to support new compatible string
for the Amlogic's Meson-AXG SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
index 786dc39ca904..3a880528030e 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -9,6 +9,7 @@ Required Properties:
- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
- GXM (S912) : "amlogic,meson-gxm-aoclkc"
+ - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
followed by the common "amlogic,meson-gx-aoclkc"
- #clock-cells: should be 1.
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 3/7] dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linux-arm-kernel
Update the dt-binding documentation to support new compatible string
for the Amlogic's Meson-AXG SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
index 786dc39ca904..3a880528030e 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -9,6 +9,7 @@ Required Properties:
- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
- GXM (S912) : "amlogic,meson-gxm-aoclkc"
+ - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
followed by the common "amlogic,meson-gx-aoclkc"
- #clock-cells: should be 1.
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 3/7] dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linus-amlogic
Update the dt-binding documentation to support new compatible string
for the Amlogic's Meson-AXG SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
index 786dc39ca904..3a880528030e 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -9,6 +9,7 @@ Required Properties:
- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
- GXM (S912) : "amlogic,meson-gxm-aoclkc"
+ - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
followed by the common "amlogic,meson-gx-aoclkc"
- #clock-cells: should be 1.
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
2018-04-26 8:44 ` Yixun Lan
(?)
(?)
@ 2018-04-26 8:44 ` Yixun Lan
-1 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Yixun Lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel, devicetree
Add dt-bindings headers for the Meson-AXG's AO clock and
reset controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
include/dt-bindings/clock/axg-aoclkc.h | 26 ++++++++++++++++++++++++++
include/dt-bindings/reset/axg-aoclkc.h | 20 ++++++++++++++++++++
2 files changed, 46 insertions(+)
create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
diff --git a/include/dt-bindings/clock/axg-aoclkc.h b/include/dt-bindings/clock/axg-aoclkc.h
new file mode 100644
index 000000000000..61955016a55b
--- /dev/null
+++ b/include/dt-bindings/clock/axg-aoclkc.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK
+#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK
+
+#define CLKID_AO_REMOTE 0
+#define CLKID_AO_I2C_MASTER 1
+#define CLKID_AO_I2C_SLAVE 2
+#define CLKID_AO_UART1 3
+#define CLKID_AO_UART2 4
+#define CLKID_AO_IR_BLASTER 5
+#define CLKID_AO_SAR_ADC 6
+#define CLKID_AO_CLK81 7
+#define CLKID_AO_SAR_ADC_SEL 8
+#define CLKID_AO_SAR_ADC_DIV 9
+#define CLKID_AO_SAR_ADC_CLK 10
+#define CLKID_AO_ALT_XTAL 11
+
+#endif
diff --git a/include/dt-bindings/reset/axg-aoclkc.h b/include/dt-bindings/reset/axg-aoclkc.h
new file mode 100644
index 000000000000..d342c0b6b2a7
--- /dev/null
+++ b/include/dt-bindings/reset/axg-aoclkc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK
+#define DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK
+
+#define RESET_AO_REMOTE 0
+#define RESET_AO_I2C_MASTER 1
+#define RESET_AO_I2C_SLAVE 2
+#define RESET_AO_UART1 3
+#define RESET_AO_UART2 4
+#define RESET_AO_IR_BLASTER 5
+
+#endif
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Yixun Lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel, devicetree
Add dt-bindings headers for the Meson-AXG's AO clock and
reset controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
include/dt-bindings/clock/axg-aoclkc.h | 26 ++++++++++++++++++++++++++
include/dt-bindings/reset/axg-aoclkc.h | 20 ++++++++++++++++++++
2 files changed, 46 insertions(+)
create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
diff --git a/include/dt-bindings/clock/axg-aoclkc.h b/include/dt-bindings/clock/axg-aoclkc.h
new file mode 100644
index 000000000000..61955016a55b
--- /dev/null
+++ b/include/dt-bindings/clock/axg-aoclkc.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK
+#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK
+
+#define CLKID_AO_REMOTE 0
+#define CLKID_AO_I2C_MASTER 1
+#define CLKID_AO_I2C_SLAVE 2
+#define CLKID_AO_UART1 3
+#define CLKID_AO_UART2 4
+#define CLKID_AO_IR_BLASTER 5
+#define CLKID_AO_SAR_ADC 6
+#define CLKID_AO_CLK81 7
+#define CLKID_AO_SAR_ADC_SEL 8
+#define CLKID_AO_SAR_ADC_DIV 9
+#define CLKID_AO_SAR_ADC_CLK 10
+#define CLKID_AO_ALT_XTAL 11
+
+#endif
diff --git a/include/dt-bindings/reset/axg-aoclkc.h b/include/dt-bindings/reset/axg-aoclkc.h
new file mode 100644
index 000000000000..d342c0b6b2a7
--- /dev/null
+++ b/include/dt-bindings/reset/axg-aoclkc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK
+#define DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK
+
+#define RESET_AO_REMOTE 0
+#define RESET_AO_I2C_MASTER 1
+#define RESET_AO_I2C_SLAVE 2
+#define RESET_AO_UART1 3
+#define RESET_AO_UART2 4
+#define RESET_AO_IR_BLASTER 5
+
+#endif
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linux-arm-kernel
Add dt-bindings headers for the Meson-AXG's AO clock and
reset controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
include/dt-bindings/clock/axg-aoclkc.h | 26 ++++++++++++++++++++++++++
include/dt-bindings/reset/axg-aoclkc.h | 20 ++++++++++++++++++++
2 files changed, 46 insertions(+)
create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
diff --git a/include/dt-bindings/clock/axg-aoclkc.h b/include/dt-bindings/clock/axg-aoclkc.h
new file mode 100644
index 000000000000..61955016a55b
--- /dev/null
+++ b/include/dt-bindings/clock/axg-aoclkc.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK
+#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK
+
+#define CLKID_AO_REMOTE 0
+#define CLKID_AO_I2C_MASTER 1
+#define CLKID_AO_I2C_SLAVE 2
+#define CLKID_AO_UART1 3
+#define CLKID_AO_UART2 4
+#define CLKID_AO_IR_BLASTER 5
+#define CLKID_AO_SAR_ADC 6
+#define CLKID_AO_CLK81 7
+#define CLKID_AO_SAR_ADC_SEL 8
+#define CLKID_AO_SAR_ADC_DIV 9
+#define CLKID_AO_SAR_ADC_CLK 10
+#define CLKID_AO_ALT_XTAL 11
+
+#endif
diff --git a/include/dt-bindings/reset/axg-aoclkc.h b/include/dt-bindings/reset/axg-aoclkc.h
new file mode 100644
index 000000000000..d342c0b6b2a7
--- /dev/null
+++ b/include/dt-bindings/reset/axg-aoclkc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK
+#define DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK
+
+#define RESET_AO_REMOTE 0
+#define RESET_AO_I2C_MASTER 1
+#define RESET_AO_I2C_SLAVE 2
+#define RESET_AO_UART1 3
+#define RESET_AO_UART2 4
+#define RESET_AO_IR_BLASTER 5
+
+#endif
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linus-amlogic
Add dt-bindings headers for the Meson-AXG's AO clock and
reset controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
include/dt-bindings/clock/axg-aoclkc.h | 26 ++++++++++++++++++++++++++
include/dt-bindings/reset/axg-aoclkc.h | 20 ++++++++++++++++++++
2 files changed, 46 insertions(+)
create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
diff --git a/include/dt-bindings/clock/axg-aoclkc.h b/include/dt-bindings/clock/axg-aoclkc.h
new file mode 100644
index 000000000000..61955016a55b
--- /dev/null
+++ b/include/dt-bindings/clock/axg-aoclkc.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK
+#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK
+
+#define CLKID_AO_REMOTE 0
+#define CLKID_AO_I2C_MASTER 1
+#define CLKID_AO_I2C_SLAVE 2
+#define CLKID_AO_UART1 3
+#define CLKID_AO_UART2 4
+#define CLKID_AO_IR_BLASTER 5
+#define CLKID_AO_SAR_ADC 6
+#define CLKID_AO_CLK81 7
+#define CLKID_AO_SAR_ADC_SEL 8
+#define CLKID_AO_SAR_ADC_DIV 9
+#define CLKID_AO_SAR_ADC_CLK 10
+#define CLKID_AO_ALT_XTAL 11
+
+#endif
diff --git a/include/dt-bindings/reset/axg-aoclkc.h b/include/dt-bindings/reset/axg-aoclkc.h
new file mode 100644
index 000000000000..d342c0b6b2a7
--- /dev/null
+++ b/include/dt-bindings/reset/axg-aoclkc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK
+#define DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK
+
+#define RESET_AO_REMOTE 0
+#define RESET_AO_I2C_MASTER 1
+#define RESET_AO_I2C_SLAVE 2
+#define RESET_AO_UART1 3
+#define RESET_AO_UART2 4
+#define RESET_AO_IR_BLASTER 5
+
+#endif
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 5/7] clk: meson-axg: Add AO Clock and Reset controller driver
2018-04-26 8:44 ` Yixun Lan
(?)
@ 2018-04-26 8:44 ` Yixun Lan
-1 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Qiufang Dai, Yixun Lan, Rob Herring, Michael Turquette,
Stephen Boyd, Philipp Zabel, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel
From: Qiufang Dai <qiufang.dai@amlogic.com>
Adds a Clock and Reset controller driver for the Always-On part
of the Amlogic Meson-AXG SoC.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/Kconfig | 1 +
drivers/clk/meson/Makefile | 2 +-
drivers/clk/meson/axg-aoclk.c | 164 ++++++++++++++++++++++++++++++++++
drivers/clk/meson/axg-aoclk.h | 29 ++++++
4 files changed, 195 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/meson/axg-aoclk.c
create mode 100644 drivers/clk/meson/axg-aoclk.h
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index fddc7ec7b820..815659eebea3 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -38,6 +38,7 @@ config COMMON_CLK_AXG
bool
depends on COMMON_CLK_AMLOGIC
select RESET_CONTROLLER
+ select COMMON_CLK_MESON_AO
select COMMON_CLK_REGMAP_MESON
select MFD_SYSCON
help
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 0a8df284f4e7..d0d13aeb369a 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -6,5 +6,5 @@ obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
-obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
+obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o
diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c
new file mode 100644
index 000000000000..29e088542387
--- /dev/null
+++ b/drivers/clk/meson/axg-aoclk.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include "clk-regmap.h"
+#include "meson-aoclk.h"
+#include "axg-aoclk.h"
+
+#define AXG_AO_GATE(_name, _bit) \
+static struct clk_regmap axg_aoclk_##_name = { \
+ .data = &(struct clk_regmap_gate_data) { \
+ .offset = (AO_RTI_GEN_CNTL_REG0), \
+ .bit_idx = (_bit), \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = "axg_ao_" #_name, \
+ .ops = &clk_regmap_gate_ops, \
+ .parent_names = (const char *[]){ "clk81" }, \
+ .num_parents = 1, \
+ .flags = CLK_IGNORE_UNUSED, \
+ }, \
+}
+
+AXG_AO_GATE(remote, 0);
+AXG_AO_GATE(i2c_master, 1);
+AXG_AO_GATE(i2c_slave, 2);
+AXG_AO_GATE(uart1, 3);
+AXG_AO_GATE(uart2, 5);
+AXG_AO_GATE(ir_blaster, 6);
+AXG_AO_GATE(saradc, 7);
+
+static struct clk_regmap axg_aoclk_clk81 = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = AO_RTI_PWR_CNTL_REG0,
+ .mask = 0x1,
+ .shift = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_clk81",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "clk81", "ao_alt_xtal"},
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap axg_aoclk_saradc_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = AO_SAR_CLK,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_saradc_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = (const char *[]){ "xtal", "axg_ao_clk81" },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap axg_aoclk_saradc_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = AO_SAR_CLK,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_saradc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "axg_ao_saradc_mux" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap axg_aoclk_saradc_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = AO_SAR_CLK,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_saradc_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "axg_ao_saradc_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const unsigned int axg_aoclk_reset[] = {
+ [RESET_AO_REMOTE] = 16,
+ [RESET_AO_I2C_MASTER] = 18,
+ [RESET_AO_I2C_SLAVE] = 19,
+ [RESET_AO_UART1] = 17,
+ [RESET_AO_UART2] = 22,
+ [RESET_AO_IR_BLASTER] = 23,
+};
+
+static struct clk_regmap *axg_aoclk_regmap[] = {
+ [CLKID_AO_REMOTE] = &axg_aoclk_remote,
+ [CLKID_AO_I2C_MASTER] = &axg_aoclk_i2c_master,
+ [CLKID_AO_I2C_SLAVE] = &axg_aoclk_i2c_slave,
+ [CLKID_AO_UART1] = &axg_aoclk_uart1,
+ [CLKID_AO_UART2] = &axg_aoclk_uart2,
+ [CLKID_AO_IR_BLASTER] = &axg_aoclk_ir_blaster,
+ [CLKID_AO_SAR_ADC] = &axg_aoclk_saradc,
+ [CLKID_AO_CLK81] = &axg_aoclk_clk81,
+ [CLKID_AO_SAR_ADC_SEL] = &axg_aoclk_saradc_mux,
+ [CLKID_AO_SAR_ADC_DIV] = &axg_aoclk_saradc_div,
+ [CLKID_AO_SAR_ADC_CLK] = &axg_aoclk_saradc_gate,
+};
+
+static const struct clk_hw_onecell_data axg_aoclk_onecell_data = {
+ .hws = {
+ [CLKID_AO_REMOTE] = &axg_aoclk_remote.hw,
+ [CLKID_AO_I2C_MASTER] = &axg_aoclk_i2c_master.hw,
+ [CLKID_AO_I2C_SLAVE] = &axg_aoclk_i2c_slave.hw,
+ [CLKID_AO_UART1] = &axg_aoclk_uart1.hw,
+ [CLKID_AO_UART2] = &axg_aoclk_uart2.hw,
+ [CLKID_AO_IR_BLASTER] = &axg_aoclk_ir_blaster.hw,
+ [CLKID_AO_SAR_ADC] = &axg_aoclk_saradc.hw,
+ [CLKID_AO_CLK81] = &axg_aoclk_clk81.hw,
+ [CLKID_AO_SAR_ADC_SEL] = &axg_aoclk_saradc_mux.hw,
+ [CLKID_AO_SAR_ADC_DIV] = &axg_aoclk_saradc_div.hw,
+ [CLKID_AO_SAR_ADC_CLK] = &axg_aoclk_saradc_gate.hw,
+ },
+ .num = NR_CLKS,
+};
+
+static const struct meson_aoclk_data axg_aoclkc_data = {
+ .reset_reg = AO_RTI_GEN_CNTL_REG0,
+ .num_reset = ARRAY_SIZE(axg_aoclk_reset),
+ .reset = axg_aoclk_reset,
+ .num_clks = ARRAY_SIZE(axg_aoclk_regmap),
+ .clks = axg_aoclk_regmap,
+ .hw_data = &axg_aoclk_onecell_data,
+};
+
+static const struct of_device_id axg_aoclkc_match_table[] = {
+ {
+ .compatible = "amlogic,meson-axg-aoclkc",
+ .data = &axg_aoclkc_data,
+ },
+ { }
+};
+
+static struct platform_driver axg_aoclkc_driver = {
+ .probe = meson_aoclkc_probe,
+ .driver = {
+ .name = "axg-aoclkc",
+ .of_match_table = axg_aoclkc_match_table,
+ },
+};
+
+builtin_platform_driver(axg_aoclkc_driver);
diff --git a/drivers/clk/meson/axg-aoclk.h b/drivers/clk/meson/axg-aoclk.h
new file mode 100644
index 000000000000..91384d8dd844
--- /dev/null
+++ b/drivers/clk/meson/axg-aoclk.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef __AXG_AOCLKC_H
+#define __AXG_AOCLKC_H
+
+#define NR_CLKS 11
+/* AO Configuration Clock registers offsets
+ * Register offsets from the data sheet must be multiplied by 4.
+ */
+#define AO_RTI_PWR_CNTL_REG1 0x0C
+#define AO_RTI_PWR_CNTL_REG0 0x10
+#define AO_RTI_GEN_CNTL_REG0 0x40
+#define AO_OSCIN_CNTL 0x58
+#define AO_CRT_CLK_CNTL1 0x68
+#define AO_SAR_CLK 0x90
+#define AO_RTC_ALT_CLK_CNTL0 0x94
+#define AO_RTC_ALT_CLK_CNTL1 0x98
+
+#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/reset/axg-aoclkc.h>
+
+#endif /* __AXG_AOCLKC_H */
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 5/7] clk: meson-axg: Add AO Clock and Reset controller driver
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linux-arm-kernel
From: Qiufang Dai <qiufang.dai@amlogic.com>
Adds a Clock and Reset controller driver for the Always-On part
of the Amlogic Meson-AXG SoC.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/Kconfig | 1 +
drivers/clk/meson/Makefile | 2 +-
drivers/clk/meson/axg-aoclk.c | 164 ++++++++++++++++++++++++++++++++++
drivers/clk/meson/axg-aoclk.h | 29 ++++++
4 files changed, 195 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/meson/axg-aoclk.c
create mode 100644 drivers/clk/meson/axg-aoclk.h
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index fddc7ec7b820..815659eebea3 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -38,6 +38,7 @@ config COMMON_CLK_AXG
bool
depends on COMMON_CLK_AMLOGIC
select RESET_CONTROLLER
+ select COMMON_CLK_MESON_AO
select COMMON_CLK_REGMAP_MESON
select MFD_SYSCON
help
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 0a8df284f4e7..d0d13aeb369a 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -6,5 +6,5 @@ obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
-obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
+obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o
diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c
new file mode 100644
index 000000000000..29e088542387
--- /dev/null
+++ b/drivers/clk/meson/axg-aoclk.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include "clk-regmap.h"
+#include "meson-aoclk.h"
+#include "axg-aoclk.h"
+
+#define AXG_AO_GATE(_name, _bit) \
+static struct clk_regmap axg_aoclk_##_name = { \
+ .data = &(struct clk_regmap_gate_data) { \
+ .offset = (AO_RTI_GEN_CNTL_REG0), \
+ .bit_idx = (_bit), \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = "axg_ao_" #_name, \
+ .ops = &clk_regmap_gate_ops, \
+ .parent_names = (const char *[]){ "clk81" }, \
+ .num_parents = 1, \
+ .flags = CLK_IGNORE_UNUSED, \
+ }, \
+}
+
+AXG_AO_GATE(remote, 0);
+AXG_AO_GATE(i2c_master, 1);
+AXG_AO_GATE(i2c_slave, 2);
+AXG_AO_GATE(uart1, 3);
+AXG_AO_GATE(uart2, 5);
+AXG_AO_GATE(ir_blaster, 6);
+AXG_AO_GATE(saradc, 7);
+
+static struct clk_regmap axg_aoclk_clk81 = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = AO_RTI_PWR_CNTL_REG0,
+ .mask = 0x1,
+ .shift = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_clk81",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "clk81", "ao_alt_xtal"},
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap axg_aoclk_saradc_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = AO_SAR_CLK,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_saradc_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = (const char *[]){ "xtal", "axg_ao_clk81" },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap axg_aoclk_saradc_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = AO_SAR_CLK,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_saradc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "axg_ao_saradc_mux" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap axg_aoclk_saradc_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = AO_SAR_CLK,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_saradc_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "axg_ao_saradc_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const unsigned int axg_aoclk_reset[] = {
+ [RESET_AO_REMOTE] = 16,
+ [RESET_AO_I2C_MASTER] = 18,
+ [RESET_AO_I2C_SLAVE] = 19,
+ [RESET_AO_UART1] = 17,
+ [RESET_AO_UART2] = 22,
+ [RESET_AO_IR_BLASTER] = 23,
+};
+
+static struct clk_regmap *axg_aoclk_regmap[] = {
+ [CLKID_AO_REMOTE] = &axg_aoclk_remote,
+ [CLKID_AO_I2C_MASTER] = &axg_aoclk_i2c_master,
+ [CLKID_AO_I2C_SLAVE] = &axg_aoclk_i2c_slave,
+ [CLKID_AO_UART1] = &axg_aoclk_uart1,
+ [CLKID_AO_UART2] = &axg_aoclk_uart2,
+ [CLKID_AO_IR_BLASTER] = &axg_aoclk_ir_blaster,
+ [CLKID_AO_SAR_ADC] = &axg_aoclk_saradc,
+ [CLKID_AO_CLK81] = &axg_aoclk_clk81,
+ [CLKID_AO_SAR_ADC_SEL] = &axg_aoclk_saradc_mux,
+ [CLKID_AO_SAR_ADC_DIV] = &axg_aoclk_saradc_div,
+ [CLKID_AO_SAR_ADC_CLK] = &axg_aoclk_saradc_gate,
+};
+
+static const struct clk_hw_onecell_data axg_aoclk_onecell_data = {
+ .hws = {
+ [CLKID_AO_REMOTE] = &axg_aoclk_remote.hw,
+ [CLKID_AO_I2C_MASTER] = &axg_aoclk_i2c_master.hw,
+ [CLKID_AO_I2C_SLAVE] = &axg_aoclk_i2c_slave.hw,
+ [CLKID_AO_UART1] = &axg_aoclk_uart1.hw,
+ [CLKID_AO_UART2] = &axg_aoclk_uart2.hw,
+ [CLKID_AO_IR_BLASTER] = &axg_aoclk_ir_blaster.hw,
+ [CLKID_AO_SAR_ADC] = &axg_aoclk_saradc.hw,
+ [CLKID_AO_CLK81] = &axg_aoclk_clk81.hw,
+ [CLKID_AO_SAR_ADC_SEL] = &axg_aoclk_saradc_mux.hw,
+ [CLKID_AO_SAR_ADC_DIV] = &axg_aoclk_saradc_div.hw,
+ [CLKID_AO_SAR_ADC_CLK] = &axg_aoclk_saradc_gate.hw,
+ },
+ .num = NR_CLKS,
+};
+
+static const struct meson_aoclk_data axg_aoclkc_data = {
+ .reset_reg = AO_RTI_GEN_CNTL_REG0,
+ .num_reset = ARRAY_SIZE(axg_aoclk_reset),
+ .reset = axg_aoclk_reset,
+ .num_clks = ARRAY_SIZE(axg_aoclk_regmap),
+ .clks = axg_aoclk_regmap,
+ .hw_data = &axg_aoclk_onecell_data,
+};
+
+static const struct of_device_id axg_aoclkc_match_table[] = {
+ {
+ .compatible = "amlogic,meson-axg-aoclkc",
+ .data = &axg_aoclkc_data,
+ },
+ { }
+};
+
+static struct platform_driver axg_aoclkc_driver = {
+ .probe = meson_aoclkc_probe,
+ .driver = {
+ .name = "axg-aoclkc",
+ .of_match_table = axg_aoclkc_match_table,
+ },
+};
+
+builtin_platform_driver(axg_aoclkc_driver);
diff --git a/drivers/clk/meson/axg-aoclk.h b/drivers/clk/meson/axg-aoclk.h
new file mode 100644
index 000000000000..91384d8dd844
--- /dev/null
+++ b/drivers/clk/meson/axg-aoclk.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef __AXG_AOCLKC_H
+#define __AXG_AOCLKC_H
+
+#define NR_CLKS 11
+/* AO Configuration Clock registers offsets
+ * Register offsets from the data sheet must be multiplied by 4.
+ */
+#define AO_RTI_PWR_CNTL_REG1 0x0C
+#define AO_RTI_PWR_CNTL_REG0 0x10
+#define AO_RTI_GEN_CNTL_REG0 0x40
+#define AO_OSCIN_CNTL 0x58
+#define AO_CRT_CLK_CNTL1 0x68
+#define AO_SAR_CLK 0x90
+#define AO_RTC_ALT_CLK_CNTL0 0x94
+#define AO_RTC_ALT_CLK_CNTL1 0x98
+
+#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/reset/axg-aoclkc.h>
+
+#endif /* __AXG_AOCLKC_H */
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 5/7] clk: meson-axg: Add AO Clock and Reset controller driver
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linus-amlogic
From: Qiufang Dai <qiufang.dai@amlogic.com>
Adds a Clock and Reset controller driver for the Always-On part
of the Amlogic Meson-AXG SoC.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/Kconfig | 1 +
drivers/clk/meson/Makefile | 2 +-
drivers/clk/meson/axg-aoclk.c | 164 ++++++++++++++++++++++++++++++++++
drivers/clk/meson/axg-aoclk.h | 29 ++++++
4 files changed, 195 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/meson/axg-aoclk.c
create mode 100644 drivers/clk/meson/axg-aoclk.h
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index fddc7ec7b820..815659eebea3 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -38,6 +38,7 @@ config COMMON_CLK_AXG
bool
depends on COMMON_CLK_AMLOGIC
select RESET_CONTROLLER
+ select COMMON_CLK_MESON_AO
select COMMON_CLK_REGMAP_MESON
select MFD_SYSCON
help
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 0a8df284f4e7..d0d13aeb369a 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -6,5 +6,5 @@ obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
-obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
+obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o
diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c
new file mode 100644
index 000000000000..29e088542387
--- /dev/null
+++ b/drivers/clk/meson/axg-aoclk.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include "clk-regmap.h"
+#include "meson-aoclk.h"
+#include "axg-aoclk.h"
+
+#define AXG_AO_GATE(_name, _bit) \
+static struct clk_regmap axg_aoclk_##_name = { \
+ .data = &(struct clk_regmap_gate_data) { \
+ .offset = (AO_RTI_GEN_CNTL_REG0), \
+ .bit_idx = (_bit), \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = "axg_ao_" #_name, \
+ .ops = &clk_regmap_gate_ops, \
+ .parent_names = (const char *[]){ "clk81" }, \
+ .num_parents = 1, \
+ .flags = CLK_IGNORE_UNUSED, \
+ }, \
+}
+
+AXG_AO_GATE(remote, 0);
+AXG_AO_GATE(i2c_master, 1);
+AXG_AO_GATE(i2c_slave, 2);
+AXG_AO_GATE(uart1, 3);
+AXG_AO_GATE(uart2, 5);
+AXG_AO_GATE(ir_blaster, 6);
+AXG_AO_GATE(saradc, 7);
+
+static struct clk_regmap axg_aoclk_clk81 = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = AO_RTI_PWR_CNTL_REG0,
+ .mask = 0x1,
+ .shift = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_clk81",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "clk81", "ao_alt_xtal"},
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap axg_aoclk_saradc_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = AO_SAR_CLK,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_saradc_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = (const char *[]){ "xtal", "axg_ao_clk81" },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap axg_aoclk_saradc_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = AO_SAR_CLK,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_saradc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "axg_ao_saradc_mux" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap axg_aoclk_saradc_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = AO_SAR_CLK,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "axg_ao_saradc_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "axg_ao_saradc_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const unsigned int axg_aoclk_reset[] = {
+ [RESET_AO_REMOTE] = 16,
+ [RESET_AO_I2C_MASTER] = 18,
+ [RESET_AO_I2C_SLAVE] = 19,
+ [RESET_AO_UART1] = 17,
+ [RESET_AO_UART2] = 22,
+ [RESET_AO_IR_BLASTER] = 23,
+};
+
+static struct clk_regmap *axg_aoclk_regmap[] = {
+ [CLKID_AO_REMOTE] = &axg_aoclk_remote,
+ [CLKID_AO_I2C_MASTER] = &axg_aoclk_i2c_master,
+ [CLKID_AO_I2C_SLAVE] = &axg_aoclk_i2c_slave,
+ [CLKID_AO_UART1] = &axg_aoclk_uart1,
+ [CLKID_AO_UART2] = &axg_aoclk_uart2,
+ [CLKID_AO_IR_BLASTER] = &axg_aoclk_ir_blaster,
+ [CLKID_AO_SAR_ADC] = &axg_aoclk_saradc,
+ [CLKID_AO_CLK81] = &axg_aoclk_clk81,
+ [CLKID_AO_SAR_ADC_SEL] = &axg_aoclk_saradc_mux,
+ [CLKID_AO_SAR_ADC_DIV] = &axg_aoclk_saradc_div,
+ [CLKID_AO_SAR_ADC_CLK] = &axg_aoclk_saradc_gate,
+};
+
+static const struct clk_hw_onecell_data axg_aoclk_onecell_data = {
+ .hws = {
+ [CLKID_AO_REMOTE] = &axg_aoclk_remote.hw,
+ [CLKID_AO_I2C_MASTER] = &axg_aoclk_i2c_master.hw,
+ [CLKID_AO_I2C_SLAVE] = &axg_aoclk_i2c_slave.hw,
+ [CLKID_AO_UART1] = &axg_aoclk_uart1.hw,
+ [CLKID_AO_UART2] = &axg_aoclk_uart2.hw,
+ [CLKID_AO_IR_BLASTER] = &axg_aoclk_ir_blaster.hw,
+ [CLKID_AO_SAR_ADC] = &axg_aoclk_saradc.hw,
+ [CLKID_AO_CLK81] = &axg_aoclk_clk81.hw,
+ [CLKID_AO_SAR_ADC_SEL] = &axg_aoclk_saradc_mux.hw,
+ [CLKID_AO_SAR_ADC_DIV] = &axg_aoclk_saradc_div.hw,
+ [CLKID_AO_SAR_ADC_CLK] = &axg_aoclk_saradc_gate.hw,
+ },
+ .num = NR_CLKS,
+};
+
+static const struct meson_aoclk_data axg_aoclkc_data = {
+ .reset_reg = AO_RTI_GEN_CNTL_REG0,
+ .num_reset = ARRAY_SIZE(axg_aoclk_reset),
+ .reset = axg_aoclk_reset,
+ .num_clks = ARRAY_SIZE(axg_aoclk_regmap),
+ .clks = axg_aoclk_regmap,
+ .hw_data = &axg_aoclk_onecell_data,
+};
+
+static const struct of_device_id axg_aoclkc_match_table[] = {
+ {
+ .compatible = "amlogic,meson-axg-aoclkc",
+ .data = &axg_aoclkc_data,
+ },
+ { }
+};
+
+static struct platform_driver axg_aoclkc_driver = {
+ .probe = meson_aoclkc_probe,
+ .driver = {
+ .name = "axg-aoclkc",
+ .of_match_table = axg_aoclkc_match_table,
+ },
+};
+
+builtin_platform_driver(axg_aoclkc_driver);
diff --git a/drivers/clk/meson/axg-aoclk.h b/drivers/clk/meson/axg-aoclk.h
new file mode 100644
index 000000000000..91384d8dd844
--- /dev/null
+++ b/drivers/clk/meson/axg-aoclk.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef __AXG_AOCLKC_H
+#define __AXG_AOCLKC_H
+
+#define NR_CLKS 11
+/* AO Configuration Clock registers offsets
+ * Register offsets from the data sheet must be multiplied by 4.
+ */
+#define AO_RTI_PWR_CNTL_REG1 0x0C
+#define AO_RTI_PWR_CNTL_REG0 0x10
+#define AO_RTI_GEN_CNTL_REG0 0x40
+#define AO_OSCIN_CNTL 0x58
+#define AO_CRT_CLK_CNTL1 0x68
+#define AO_SAR_CLK 0x90
+#define AO_RTC_ALT_CLK_CNTL0 0x94
+#define AO_RTC_ALT_CLK_CNTL1 0x98
+
+#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/reset/axg-aoclkc.h>
+
+#endif /* __AXG_AOCLKC_H */
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 6/7] clk: meson: drop CLK_SET_RATE_PARENT flag
2018-04-26 8:44 ` Yixun Lan
(?)
@ 2018-04-26 8:44 ` Yixun Lan
-1 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Yixun Lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel
The clk81 is not expected to be changed, so drop this flag.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/gxbb-aoclk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index 20f73e0d82a4..408e3e2fca18 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -69,7 +69,7 @@ static struct clk_regmap _name##_ao = { \
.ops = &clk_regmap_gate_ops, \
.parent_names = (const char *[]){ "clk81" }, \
.num_parents = 1, \
- .flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED), \
+ .flags = CLK_IGNORE_UNUSED, \
}, \
}
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 6/7] clk: meson: drop CLK_SET_RATE_PARENT flag
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linux-arm-kernel
The clk81 is not expected to be changed, so drop this flag.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/gxbb-aoclk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index 20f73e0d82a4..408e3e2fca18 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -69,7 +69,7 @@ static struct clk_regmap _name##_ao = { \
.ops = &clk_regmap_gate_ops, \
.parent_names = (const char *[]){ "clk81" }, \
.num_parents = 1, \
- .flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED), \
+ .flags = CLK_IGNORE_UNUSED, \
}, \
}
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 6/7] clk: meson: drop CLK_SET_RATE_PARENT flag
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linus-amlogic
The clk81 is not expected to be changed, so drop this flag.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/gxbb-aoclk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index 20f73e0d82a4..408e3e2fca18 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -69,7 +69,7 @@ static struct clk_regmap _name##_ao = { \
.ops = &clk_regmap_gate_ops, \
.parent_names = (const char *[]){ "clk81" }, \
.num_parents = 1, \
- .flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED), \
+ .flags = CLK_IGNORE_UNUSED, \
}, \
}
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
2018-04-26 8:44 ` Yixun Lan
(?)
@ 2018-04-26 8:44 ` Yixun Lan
-1 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Yixun Lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel
Rely on drivers to request the clock explicitly.
Previous the kernel will leave the clock on while
bootloader adready initilized the clock, this wasn't
optimal way, so fix it here.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/axg-aoclk.c | 1 -
drivers/clk/meson/gxbb-aoclk.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c
index 29e088542387..ab42596a9801 100644
--- a/drivers/clk/meson/axg-aoclk.c
+++ b/drivers/clk/meson/axg-aoclk.c
@@ -27,7 +27,6 @@ static struct clk_regmap axg_aoclk_##_name = { \
.ops = &clk_regmap_gate_ops, \
.parent_names = (const char *[]){ "clk81" }, \
.num_parents = 1, \
- .flags = CLK_IGNORE_UNUSED, \
}, \
}
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index 408e3e2fca18..f5895730067b 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -69,7 +69,6 @@ static struct clk_regmap _name##_ao = { \
.ops = &clk_regmap_gate_ops, \
.parent_names = (const char *[]){ "clk81" }, \
.num_parents = 1, \
- .flags = CLK_IGNORE_UNUSED, \
}, \
}
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linux-arm-kernel
Rely on drivers to request the clock explicitly.
Previous the kernel will leave the clock on while
bootloader adready initilized the clock, this wasn't
optimal way, so fix it here.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/axg-aoclk.c | 1 -
drivers/clk/meson/gxbb-aoclk.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c
index 29e088542387..ab42596a9801 100644
--- a/drivers/clk/meson/axg-aoclk.c
+++ b/drivers/clk/meson/axg-aoclk.c
@@ -27,7 +27,6 @@ static struct clk_regmap axg_aoclk_##_name = { \
.ops = &clk_regmap_gate_ops, \
.parent_names = (const char *[]){ "clk81" }, \
.num_parents = 1, \
- .flags = CLK_IGNORE_UNUSED, \
}, \
}
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index 408e3e2fca18..f5895730067b 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -69,7 +69,6 @@ static struct clk_regmap _name##_ao = { \
.ops = &clk_regmap_gate_ops, \
.parent_names = (const char *[]){ "clk81" }, \
.num_parents = 1, \
- .flags = CLK_IGNORE_UNUSED, \
}, \
}
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
@ 2018-04-26 8:44 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 8:44 UTC (permalink / raw)
To: linus-amlogic
Rely on drivers to request the clock explicitly.
Previous the kernel will leave the clock on while
bootloader adready initilized the clock, this wasn't
optimal way, so fix it here.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
drivers/clk/meson/axg-aoclk.c | 1 -
drivers/clk/meson/gxbb-aoclk.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c
index 29e088542387..ab42596a9801 100644
--- a/drivers/clk/meson/axg-aoclk.c
+++ b/drivers/clk/meson/axg-aoclk.c
@@ -27,7 +27,6 @@ static struct clk_regmap axg_aoclk_##_name = { \
.ops = &clk_regmap_gate_ops, \
.parent_names = (const char *[]){ "clk81" }, \
.num_parents = 1, \
- .flags = CLK_IGNORE_UNUSED, \
}, \
}
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index 408e3e2fca18..f5895730067b 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -69,7 +69,6 @@ static struct clk_regmap _name##_ao = { \
.ops = &clk_regmap_gate_ops, \
.parent_names = (const char *[]){ "clk81" }, \
.num_parents = 1, \
- .flags = CLK_IGNORE_UNUSED, \
}, \
}
--
2.17.0
^ permalink raw reply related [flat|nested] 68+ messages in thread
* Re: [PATCH v7 5/7] clk: meson-axg: Add AO Clock and Reset controller driver
2018-04-26 8:44 ` Yixun Lan
(?)
(?)
@ 2018-04-26 8:59 ` Philipp Zabel
-1 siblings, 0 replies; 68+ messages in thread
From: Philipp Zabel @ 2018-04-26 8:59 UTC (permalink / raw)
To: Yixun Lan, Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Qiufang Dai, Rob Herring, Michael Turquette, Stephen Boyd,
linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> From: Qiufang Dai <qiufang.dai@amlogic.com>
>
> Adds a Clock and Reset controller driver for the Always-On part
> of the Amlogic Meson-AXG SoC.
>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Wrong patch, I have not formed an opinion on this one.
regards
Philipp
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 5/7] clk: meson-axg: Add AO Clock and Reset controller driver
@ 2018-04-26 8:59 ` Philipp Zabel
0 siblings, 0 replies; 68+ messages in thread
From: Philipp Zabel @ 2018-04-26 8:59 UTC (permalink / raw)
To: Yixun Lan, Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Qiufang Dai, Rob Herring, Michael Turquette, Stephen Boyd,
linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> From: Qiufang Dai <qiufang.dai@amlogic.com>
>
> Adds a Clock and Reset controller driver for the Always-On part
> of the Amlogic Meson-AXG SoC.
>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Wrong patch, I have not formed an opinion on this one.
regards
Philipp
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 5/7] clk: meson-axg: Add AO Clock and Reset controller driver
@ 2018-04-26 8:59 ` Philipp Zabel
0 siblings, 0 replies; 68+ messages in thread
From: Philipp Zabel @ 2018-04-26 8:59 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> From: Qiufang Dai <qiufang.dai@amlogic.com>
>
> Adds a Clock and Reset controller driver for the Always-On part
> of the Amlogic Meson-AXG SoC.
>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Wrong patch, I have not formed an opinion on this one.
regards
Philipp
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 5/7] clk: meson-axg: Add AO Clock and Reset controller driver
@ 2018-04-26 8:59 ` Philipp Zabel
0 siblings, 0 replies; 68+ messages in thread
From: Philipp Zabel @ 2018-04-26 8:59 UTC (permalink / raw)
To: linus-amlogic
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> From: Qiufang Dai <qiufang.dai@amlogic.com>
>
> Adds a Clock and Reset controller driver for the Always-On part
> of the Amlogic Meson-AXG SoC.
>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Wrong patch, I have not formed an opinion on this one.
regards
Philipp
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
2018-04-26 8:44 ` Yixun Lan
(?)
(?)
@ 2018-04-26 8:59 ` Philipp Zabel
-1 siblings, 0 replies; 68+ messages in thread
From: Philipp Zabel @ 2018-04-26 8:59 UTC (permalink / raw)
To: Yixun Lan, Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Rob Herring, Michael Turquette, Stephen Boyd, Qiufang Dai,
linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel,
devicetree
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> Add dt-bindings headers for the Meson-AXG's AO clock and
> reset controller.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
This one is
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
regards
Philipp
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
@ 2018-04-26 8:59 ` Philipp Zabel
0 siblings, 0 replies; 68+ messages in thread
From: Philipp Zabel @ 2018-04-26 8:59 UTC (permalink / raw)
To: Yixun Lan, Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: Rob Herring, Michael Turquette, Stephen Boyd, Qiufang Dai,
linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel,
devicetree
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> Add dt-bindings headers for the Meson-AXG's AO clock and
> reset controller.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
This one is
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
regards
Philipp
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
@ 2018-04-26 8:59 ` Philipp Zabel
0 siblings, 0 replies; 68+ messages in thread
From: Philipp Zabel @ 2018-04-26 8:59 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> Add dt-bindings headers for the Meson-AXG's AO clock and
> reset controller.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
This one is
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
regards
Philipp
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
@ 2018-04-26 8:59 ` Philipp Zabel
0 siblings, 0 replies; 68+ messages in thread
From: Philipp Zabel @ 2018-04-26 8:59 UTC (permalink / raw)
To: linus-amlogic
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> Add dt-bindings headers for the Meson-AXG's AO clock and
> reset controller.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
This one is
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
regards
Philipp
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
2018-04-26 8:59 ` Philipp Zabel
(?)
(?)
@ 2018-04-26 9:05 ` Yixun Lan
-1 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 9:05 UTC (permalink / raw)
To: Philipp Zabel, Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: yixun.lan, Rob Herring, Michael Turquette, Stephen Boyd,
Qiufang Dai, linux-amlogic, linux-clk, linux-arm-kernel,
linux-kernel, devicetree
On 04/26/18 16:59, Philipp Zabel wrote:
> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>> Add dt-bindings headers for the Meson-AXG's AO clock and
>> reset controller.
>>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>
> This one is
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
>
Hi Philipp
My bad, Indeed, I made a mistake..
HI Jerome:
Could you fix this once apply the patch series?
or do you want me send another version?
Yixun
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
@ 2018-04-26 9:05 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 9:05 UTC (permalink / raw)
To: Philipp Zabel, Neil Armstrong, Jerome Brunet, Kevin Hilman, Carlo Caione
Cc: yixun.lan, Rob Herring, Michael Turquette, Stephen Boyd,
Qiufang Dai, linux-amlogic, linux-clk, linux-arm-kernel,
linux-kernel, devicetree
On 04/26/18 16:59, Philipp Zabel wrote:
> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>> Add dt-bindings headers for the Meson-AXG's AO clock and
>> reset controller.
>>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>
> This one is
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
>
Hi Philipp
My bad, Indeed, I made a mistake..
HI Jerome:
Could you fix this once apply the patch series?
or do you want me send another version?
Yixun
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
@ 2018-04-26 9:05 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 9:05 UTC (permalink / raw)
To: linux-arm-kernel
On 04/26/18 16:59, Philipp Zabel wrote:
> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>> Add dt-bindings headers for the Meson-AXG's AO clock and
>> reset controller.
>>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>
> This one is
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
>
Hi Philipp
My bad, Indeed, I made a mistake..
HI Jerome:
Could you fix this once apply the patch series?
or do you want me send another version?
Yixun
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
@ 2018-04-26 9:05 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-26 9:05 UTC (permalink / raw)
To: linus-amlogic
On 04/26/18 16:59, Philipp Zabel wrote:
> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>> Add dt-bindings headers for the Meson-AXG's AO clock and
>> reset controller.
>>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>
> This one is
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
>
Hi Philipp
My bad, Indeed, I made a mistake..
HI Jerome:
Could you fix this once apply the patch series?
or do you want me send another version?
Yixun
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
2018-04-26 8:44 ` Yixun Lan
(?)
(?)
@ 2018-04-27 9:20 ` Jerome Brunet
-1 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 9:20 UTC (permalink / raw)
To: Yixun Lan, Neil Armstrong, Kevin Hilman, Carlo Caione
Cc: Rob Herring, Michael Turquette, Stephen Boyd, Philipp Zabel,
Qiufang Dai, linux-amlogic, linux-clk, linux-arm-kernel,
linux-kernel, devicetree
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> This patch try to add AO clock and Reset driver for Amlogic's
> Meson-AXG SoC.
> Please note that patch 7 need to wait for the DTS changes[3] merged
> into mainline first, otherwise it will break the serial console.
>
> patch 2: factor the common code into a dedicated file
> patch 3-5: add the aoclk driver for AXG SoC
> patch 6-7: drop unnecessary clock flags
>
> changes since v6 at [7]:
> - fix over 80 chars chechpatch error
> - add Philip's Ack on patch 5
> - drop extra end of newline
>
> changes since v5 at [6]:
> - drop unnecessary header files
> - add 'axg_aoclk' prefix to clk driver, make them more consistent
> - add missing end new line..
>
> changes since v4 at [5]:
> - fix return err
> - introduce CONFIG_COMMON_CLK_MESON_AO
> - format/style minor fix
>
> changes since v3 at [4]:
> - add 'const' contraint to the read-only data
> - switch to devm_of_clk_add_hw_provider API
> - check return value of devm_reset_controller_register
>
> changes since v2 at [2]:
> - rework meson_aoclkc_probe() which leverage the of_match_data
> - merge patch 5-6 into this series
> - seperate DTS patch, will send to Kevin Hilman independently
>
> changes since v1 at [0]:
> - rebase to clk-meson's branch 'next/drivers' [1]
> - fix license, update to BSD-3-Clause
> - drop un-used include header file
>
> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com
> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan@amlogic.com
> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan@amlogic.com
> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan@amlogic.com
Yixun,
Your series looks mostly Ok to me, apart from the problem reported by Philipp.
However, once applied, if the clkc ao controller is enabled, both gxl and axg
fail to complete the boot. Could you please explain how this was tested ??
Not merging it until we get to the bottom of this.
>
>
> Qiufang Dai (1):
> clk: meson-axg: Add AO Clock and Reset controller driver
>
> Yixun Lan (6):
> clk: meson: migrate to devm_of_clk_add_hw_provider API
> clk: meson: aoclk: refactor common code into dedicated file
> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
> clk: meson: drop CLK_SET_RATE_PARENT flag
> clk: meson: drop CLK_IGNORE_UNUSED flag
>
> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
> drivers/clk/meson/Kconfig | 8 +
> drivers/clk/meson/Makefile | 3 +-
> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
> drivers/clk/meson/axg-aoclk.h | 29 ++++
> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
> drivers/clk/meson/gxbb-aoclk.h | 5 +
> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
> drivers/clk/meson/meson-aoclk.h | 34 ++++
> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
> 11 files changed, 401 insertions(+), 64 deletions(-)
> create mode 100644 drivers/clk/meson/axg-aoclk.c
> create mode 100644 drivers/clk/meson/axg-aoclk.h
> create mode 100644 drivers/clk/meson/meson-aoclk.c
> create mode 100644 drivers/clk/meson/meson-aoclk.h
> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 9:20 ` Jerome Brunet
0 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 9:20 UTC (permalink / raw)
To: Yixun Lan, Neil Armstrong, Kevin Hilman, Carlo Caione
Cc: Rob Herring, Michael Turquette, Stephen Boyd, Philipp Zabel,
Qiufang Dai, linux-amlogic, linux-clk, linux-arm-kernel,
linux-kernel, devicetree
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> This patch try to add AO clock and Reset driver for Amlogic's
> Meson-AXG SoC.
> Please note that patch 7 need to wait for the DTS changes[3] merged
> into mainline first, otherwise it will break the serial console.
>
> patch 2: factor the common code into a dedicated file
> patch 3-5: add the aoclk driver for AXG SoC
> patch 6-7: drop unnecessary clock flags
>
> changes since v6 at [7]:
> - fix over 80 chars chechpatch error
> - add Philip's Ack on patch 5
> - drop extra end of newline
>
> changes since v5 at [6]:
> - drop unnecessary header files
> - add 'axg_aoclk' prefix to clk driver, make them more consistent
> - add missing end new line..
>
> changes since v4 at [5]:
> - fix return err
> - introduce CONFIG_COMMON_CLK_MESON_AO
> - format/style minor fix
>
> changes since v3 at [4]:
> - add 'const' contraint to the read-only data
> - switch to devm_of_clk_add_hw_provider API
> - check return value of devm_reset_controller_register
>
> changes since v2 at [2]:
> - rework meson_aoclkc_probe() which leverage the of_match_data
> - merge patch 5-6 into this series
> - seperate DTS patch, will send to Kevin Hilman independently
>
> changes since v1 at [0]:
> - rebase to clk-meson's branch 'next/drivers' [1]
> - fix license, update to BSD-3-Clause
> - drop un-used include header file
>
> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com
> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan@amlogic.com
> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan@amlogic.com
> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan@amlogic.com
Yixun,
Your series looks mostly Ok to me, apart from the problem reported by Philipp.
However, once applied, if the clkc ao controller is enabled, both gxl and axg
fail to complete the boot. Could you please explain how this was tested ??
Not merging it until we get to the bottom of this.
>
>
> Qiufang Dai (1):
> clk: meson-axg: Add AO Clock and Reset controller driver
>
> Yixun Lan (6):
> clk: meson: migrate to devm_of_clk_add_hw_provider API
> clk: meson: aoclk: refactor common code into dedicated file
> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
> clk: meson: drop CLK_SET_RATE_PARENT flag
> clk: meson: drop CLK_IGNORE_UNUSED flag
>
> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
> drivers/clk/meson/Kconfig | 8 +
> drivers/clk/meson/Makefile | 3 +-
> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
> drivers/clk/meson/axg-aoclk.h | 29 ++++
> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
> drivers/clk/meson/gxbb-aoclk.h | 5 +
> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
> drivers/clk/meson/meson-aoclk.h | 34 ++++
> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
> 11 files changed, 401 insertions(+), 64 deletions(-)
> create mode 100644 drivers/clk/meson/axg-aoclk.c
> create mode 100644 drivers/clk/meson/axg-aoclk.h
> create mode 100644 drivers/clk/meson/meson-aoclk.c
> create mode 100644 drivers/clk/meson/meson-aoclk.h
> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 9:20 ` Jerome Brunet
0 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 9:20 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> This patch try to add AO clock and Reset driver for Amlogic's
> Meson-AXG SoC.
> Please note that patch 7 need to wait for the DTS changes[3] merged
> into mainline first, otherwise it will break the serial console.
>
> patch 2: factor the common code into a dedicated file
> patch 3-5: add the aoclk driver for AXG SoC
> patch 6-7: drop unnecessary clock flags
>
> changes since v6 at [7]:
> - fix over 80 chars chechpatch error
> - add Philip's Ack on patch 5
> - drop extra end of newline
>
> changes since v5 at [6]:
> - drop unnecessary header files
> - add 'axg_aoclk' prefix to clk driver, make them more consistent
> - add missing end new line..
>
> changes since v4 at [5]:
> - fix return err
> - introduce CONFIG_COMMON_CLK_MESON_AO
> - format/style minor fix
>
> changes since v3 at [4]:
> - add 'const' contraint to the read-only data
> - switch to devm_of_clk_add_hw_provider API
> - check return value of devm_reset_controller_register
>
> changes since v2 at [2]:
> - rework meson_aoclkc_probe() which leverage the of_match_data
> - merge patch 5-6 into this series
> - seperate DTS patch, will send to Kevin Hilman independently
>
> changes since v1 at [0]:
> - rebase to clk-meson's branch 'next/drivers' [1]
> - fix license, update to BSD-3-Clause
> - drop un-used include header file
>
> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com
> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan at amlogic.com
> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan at amlogic.com
> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan at amlogic.com
Yixun,
Your series looks mostly Ok to me, apart from the problem reported by Philipp.
However, once applied, if the clkc ao controller is enabled, both gxl and axg
fail to complete the boot. Could you please explain how this was tested ??
Not merging it until we get to the bottom of this.
>
>
> Qiufang Dai (1):
> clk: meson-axg: Add AO Clock and Reset controller driver
>
> Yixun Lan (6):
> clk: meson: migrate to devm_of_clk_add_hw_provider API
> clk: meson: aoclk: refactor common code into dedicated file
> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
> clk: meson: drop CLK_SET_RATE_PARENT flag
> clk: meson: drop CLK_IGNORE_UNUSED flag
>
> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
> drivers/clk/meson/Kconfig | 8 +
> drivers/clk/meson/Makefile | 3 +-
> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
> drivers/clk/meson/axg-aoclk.h | 29 ++++
> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
> drivers/clk/meson/gxbb-aoclk.h | 5 +
> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
> drivers/clk/meson/meson-aoclk.h | 34 ++++
> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
> 11 files changed, 401 insertions(+), 64 deletions(-)
> create mode 100644 drivers/clk/meson/axg-aoclk.c
> create mode 100644 drivers/clk/meson/axg-aoclk.h
> create mode 100644 drivers/clk/meson/meson-aoclk.c
> create mode 100644 drivers/clk/meson/meson-aoclk.h
> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 9:20 ` Jerome Brunet
0 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 9:20 UTC (permalink / raw)
To: linus-amlogic
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> This patch try to add AO clock and Reset driver for Amlogic's
> Meson-AXG SoC.
> Please note that patch 7 need to wait for the DTS changes[3] merged
> into mainline first, otherwise it will break the serial console.
>
> patch 2: factor the common code into a dedicated file
> patch 3-5: add the aoclk driver for AXG SoC
> patch 6-7: drop unnecessary clock flags
>
> changes since v6 at [7]:
> - fix over 80 chars chechpatch error
> - add Philip's Ack on patch 5
> - drop extra end of newline
>
> changes since v5 at [6]:
> - drop unnecessary header files
> - add 'axg_aoclk' prefix to clk driver, make them more consistent
> - add missing end new line..
>
> changes since v4 at [5]:
> - fix return err
> - introduce CONFIG_COMMON_CLK_MESON_AO
> - format/style minor fix
>
> changes since v3 at [4]:
> - add 'const' contraint to the read-only data
> - switch to devm_of_clk_add_hw_provider API
> - check return value of devm_reset_controller_register
>
> changes since v2 at [2]:
> - rework meson_aoclkc_probe() which leverage the of_match_data
> - merge patch 5-6 into this series
> - seperate DTS patch, will send to Kevin Hilman independently
>
> changes since v1 at [0]:
> - rebase to clk-meson's branch 'next/drivers' [1]
> - fix license, update to BSD-3-Clause
> - drop un-used include header file
>
> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com
> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan at amlogic.com
> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan at amlogic.com
> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan at amlogic.com
Yixun,
Your series looks mostly Ok to me, apart from the problem reported by Philipp.
However, once applied, if the clkc ao controller is enabled, both gxl and axg
fail to complete the boot. Could you please explain how this was tested ??
Not merging it until we get to the bottom of this.
>
>
> Qiufang Dai (1):
> clk: meson-axg: Add AO Clock and Reset controller driver
>
> Yixun Lan (6):
> clk: meson: migrate to devm_of_clk_add_hw_provider API
> clk: meson: aoclk: refactor common code into dedicated file
> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
> clk: meson: drop CLK_SET_RATE_PARENT flag
> clk: meson: drop CLK_IGNORE_UNUSED flag
>
> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
> drivers/clk/meson/Kconfig | 8 +
> drivers/clk/meson/Makefile | 3 +-
> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
> drivers/clk/meson/axg-aoclk.h | 29 ++++
> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
> drivers/clk/meson/gxbb-aoclk.h | 5 +
> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
> drivers/clk/meson/meson-aoclk.h | 34 ++++
> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
> 11 files changed, 401 insertions(+), 64 deletions(-)
> create mode 100644 drivers/clk/meson/axg-aoclk.c
> create mode 100644 drivers/clk/meson/axg-aoclk.h
> create mode 100644 drivers/clk/meson/meson-aoclk.c
> create mode 100644 drivers/clk/meson/meson-aoclk.h
> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
2018-04-27 9:20 ` Jerome Brunet
(?)
(?)
@ 2018-04-27 9:31 ` Yixun Lan
-1 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-27 9:31 UTC (permalink / raw)
To: Jerome Brunet, Neil Armstrong, Kevin Hilman, Carlo Caione
Cc: yixun.lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel, devicetree
hi Jerome:
On 04/27/18 17:20, Jerome Brunet wrote:
> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>> This patch try to add AO clock and Reset driver for Amlogic's
>> Meson-AXG SoC.
>> Please note that patch 7 need to wait for the DTS changes[3] merged
>> into mainline first, otherwise it will break the serial console.
>>
>> patch 2: factor the common code into a dedicated file
>> patch 3-5: add the aoclk driver for AXG SoC
>> patch 6-7: drop unnecessary clock flags
>>
>> changes since v6 at [7]:
>> - fix over 80 chars chechpatch error
>> - add Philip's Ack on patch 5
>> - drop extra end of newline
>>
>> changes since v5 at [6]:
>> - drop unnecessary header files
>> - add 'axg_aoclk' prefix to clk driver, make them more consistent
>> - add missing end new line..
>>
>> changes since v4 at [5]:
>> - fix return err
>> - introduce CONFIG_COMMON_CLK_MESON_AO
>> - format/style minor fix
>>
>> changes since v3 at [4]:
>> - add 'const' contraint to the read-only data
>> - switch to devm_of_clk_add_hw_provider API
>> - check return value of devm_reset_controller_register
>>
>> changes since v2 at [2]:
>> - rework meson_aoclkc_probe() which leverage the of_match_data
>> - merge patch 5-6 into this series
>> - seperate DTS patch, will send to Kevin Hilman independently
>>
>> changes since v1 at [0]:
>> - rebase to clk-meson's branch 'next/drivers' [1]
>> - fix license, update to BSD-3-Clause
>> - drop un-used include header file
>>
>> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
>> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
>> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
>> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
>> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com
>> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan@amlogic.com
>> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan@amlogic.com
>> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan@amlogic.com
>
> Yixun,
>
> Your series looks mostly Ok to me, apart from the problem reported by Philipp.
>
> However, once applied, if the clkc ao controller is enabled, both gxl and axg
> fail to complete the boot. Could you please explain how this was tested ??
>
isn't this caused by the patch 7?
[PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
you need to also apply this DT patch which I've sent[1]:
[PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
could you exclude the patch 7 for now until Kevin merged the DT part?
[1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan@amlogic.com
> Not merging it until we get to the bottom of this.
>
>>
>>
>> Qiufang Dai (1):
>> clk: meson-axg: Add AO Clock and Reset controller driver
>>
>> Yixun Lan (6):
>> clk: meson: migrate to devm_of_clk_add_hw_provider API
>> clk: meson: aoclk: refactor common code into dedicated file
>> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
>> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
>> clk: meson: drop CLK_SET_RATE_PARENT flag
>> clk: meson: drop CLK_IGNORE_UNUSED flag
>>
>> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
>> drivers/clk/meson/Kconfig | 8 +
>> drivers/clk/meson/Makefile | 3 +-
>> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
>> drivers/clk/meson/axg-aoclk.h | 29 ++++
>> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
>> drivers/clk/meson/gxbb-aoclk.h | 5 +
>> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
>> drivers/clk/meson/meson-aoclk.h | 34 ++++
>> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
>> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
>> 11 files changed, 401 insertions(+), 64 deletions(-)
>> create mode 100644 drivers/clk/meson/axg-aoclk.c
>> create mode 100644 drivers/clk/meson/axg-aoclk.h
>> create mode 100644 drivers/clk/meson/meson-aoclk.c
>> create mode 100644 drivers/clk/meson/meson-aoclk.h
>> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
>> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>>
>
> .
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 9:31 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-27 9:31 UTC (permalink / raw)
To: Jerome Brunet, Neil Armstrong, Kevin Hilman, Carlo Caione
Cc: yixun.lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel, devicetree
hi Jerome:
On 04/27/18 17:20, Jerome Brunet wrote:
> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>> This patch try to add AO clock and Reset driver for Amlogic's
>> Meson-AXG SoC.
>> Please note that patch 7 need to wait for the DTS changes[3] merged
>> into mainline first, otherwise it will break the serial console.
>>
>> patch 2: factor the common code into a dedicated file
>> patch 3-5: add the aoclk driver for AXG SoC
>> patch 6-7: drop unnecessary clock flags
>>
>> changes since v6 at [7]:
>> - fix over 80 chars chechpatch error
>> - add Philip's Ack on patch 5
>> - drop extra end of newline
>>
>> changes since v5 at [6]:
>> - drop unnecessary header files
>> - add 'axg_aoclk' prefix to clk driver, make them more consistent
>> - add missing end new line..
>>
>> changes since v4 at [5]:
>> - fix return err
>> - introduce CONFIG_COMMON_CLK_MESON_AO
>> - format/style minor fix
>>
>> changes since v3 at [4]:
>> - add 'const' contraint to the read-only data
>> - switch to devm_of_clk_add_hw_provider API
>> - check return value of devm_reset_controller_register
>>
>> changes since v2 at [2]:
>> - rework meson_aoclkc_probe() which leverage the of_match_data
>> - merge patch 5-6 into this series
>> - seperate DTS patch, will send to Kevin Hilman independently
>>
>> changes since v1 at [0]:
>> - rebase to clk-meson's branch 'next/drivers' [1]
>> - fix license, update to BSD-3-Clause
>> - drop un-used include header file
>>
>> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
>> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
>> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
>> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
>> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com
>> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan@amlogic.com
>> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan@amlogic.com
>> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan@amlogic.com
>
> Yixun,
>
> Your series looks mostly Ok to me, apart from the problem reported by Philipp.
>
> However, once applied, if the clkc ao controller is enabled, both gxl and axg
> fail to complete the boot. Could you please explain how this was tested ??
>
isn't this caused by the patch 7?
[PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
you need to also apply this DT patch which I've sent[1]:
[PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
could you exclude the patch 7 for now until Kevin merged the DT part?
[1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan@amlogic.com
> Not merging it until we get to the bottom of this.
>
>>
>>
>> Qiufang Dai (1):
>> clk: meson-axg: Add AO Clock and Reset controller driver
>>
>> Yixun Lan (6):
>> clk: meson: migrate to devm_of_clk_add_hw_provider API
>> clk: meson: aoclk: refactor common code into dedicated file
>> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
>> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
>> clk: meson: drop CLK_SET_RATE_PARENT flag
>> clk: meson: drop CLK_IGNORE_UNUSED flag
>>
>> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
>> drivers/clk/meson/Kconfig | 8 +
>> drivers/clk/meson/Makefile | 3 +-
>> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
>> drivers/clk/meson/axg-aoclk.h | 29 ++++
>> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
>> drivers/clk/meson/gxbb-aoclk.h | 5 +
>> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
>> drivers/clk/meson/meson-aoclk.h | 34 ++++
>> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
>> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
>> 11 files changed, 401 insertions(+), 64 deletions(-)
>> create mode 100644 drivers/clk/meson/axg-aoclk.c
>> create mode 100644 drivers/clk/meson/axg-aoclk.h
>> create mode 100644 drivers/clk/meson/meson-aoclk.c
>> create mode 100644 drivers/clk/meson/meson-aoclk.h
>> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
>> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>>
>
> .
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 9:31 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-27 9:31 UTC (permalink / raw)
To: linux-arm-kernel
hi Jerome:
On 04/27/18 17:20, Jerome Brunet wrote:
> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>> This patch try to add AO clock and Reset driver for Amlogic's
>> Meson-AXG SoC.
>> Please note that patch 7 need to wait for the DTS changes[3] merged
>> into mainline first, otherwise it will break the serial console.
>>
>> patch 2: factor the common code into a dedicated file
>> patch 3-5: add the aoclk driver for AXG SoC
>> patch 6-7: drop unnecessary clock flags
>>
>> changes since v6 at [7]:
>> - fix over 80 chars chechpatch error
>> - add Philip's Ack on patch 5
>> - drop extra end of newline
>>
>> changes since v5 at [6]:
>> - drop unnecessary header files
>> - add 'axg_aoclk' prefix to clk driver, make them more consistent
>> - add missing end new line..
>>
>> changes since v4 at [5]:
>> - fix return err
>> - introduce CONFIG_COMMON_CLK_MESON_AO
>> - format/style minor fix
>>
>> changes since v3 at [4]:
>> - add 'const' contraint to the read-only data
>> - switch to devm_of_clk_add_hw_provider API
>> - check return value of devm_reset_controller_register
>>
>> changes since v2 at [2]:
>> - rework meson_aoclkc_probe() which leverage the of_match_data
>> - merge patch 5-6 into this series
>> - seperate DTS patch, will send to Kevin Hilman independently
>>
>> changes since v1 at [0]:
>> - rebase to clk-meson's branch 'next/drivers' [1]
>> - fix license, update to BSD-3-Clause
>> - drop un-used include header file
>>
>> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
>> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
>> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
>> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
>> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com
>> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan at amlogic.com
>> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan at amlogic.com
>> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan at amlogic.com
>
> Yixun,
>
> Your series looks mostly Ok to me, apart from the problem reported by Philipp.
>
> However, once applied, if the clkc ao controller is enabled, both gxl and axg
> fail to complete the boot. Could you please explain how this was tested ??
>
isn't this caused by the patch 7?
[PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
you need to also apply this DT patch which I've sent[1]:
[PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
could you exclude the patch 7 for now until Kevin merged the DT part?
[1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan at amlogic.com
> Not merging it until we get to the bottom of this.
>
>>
>>
>> Qiufang Dai (1):
>> clk: meson-axg: Add AO Clock and Reset controller driver
>>
>> Yixun Lan (6):
>> clk: meson: migrate to devm_of_clk_add_hw_provider API
>> clk: meson: aoclk: refactor common code into dedicated file
>> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
>> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
>> clk: meson: drop CLK_SET_RATE_PARENT flag
>> clk: meson: drop CLK_IGNORE_UNUSED flag
>>
>> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
>> drivers/clk/meson/Kconfig | 8 +
>> drivers/clk/meson/Makefile | 3 +-
>> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
>> drivers/clk/meson/axg-aoclk.h | 29 ++++
>> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
>> drivers/clk/meson/gxbb-aoclk.h | 5 +
>> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
>> drivers/clk/meson/meson-aoclk.h | 34 ++++
>> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
>> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
>> 11 files changed, 401 insertions(+), 64 deletions(-)
>> create mode 100644 drivers/clk/meson/axg-aoclk.c
>> create mode 100644 drivers/clk/meson/axg-aoclk.h
>> create mode 100644 drivers/clk/meson/meson-aoclk.c
>> create mode 100644 drivers/clk/meson/meson-aoclk.h
>> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
>> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>>
>
> .
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 9:31 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-27 9:31 UTC (permalink / raw)
To: linus-amlogic
hi Jerome:
On 04/27/18 17:20, Jerome Brunet wrote:
> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>> This patch try to add AO clock and Reset driver for Amlogic's
>> Meson-AXG SoC.
>> Please note that patch 7 need to wait for the DTS changes[3] merged
>> into mainline first, otherwise it will break the serial console.
>>
>> patch 2: factor the common code into a dedicated file
>> patch 3-5: add the aoclk driver for AXG SoC
>> patch 6-7: drop unnecessary clock flags
>>
>> changes since v6 at [7]:
>> - fix over 80 chars chechpatch error
>> - add Philip's Ack on patch 5
>> - drop extra end of newline
>>
>> changes since v5 at [6]:
>> - drop unnecessary header files
>> - add 'axg_aoclk' prefix to clk driver, make them more consistent
>> - add missing end new line..
>>
>> changes since v4 at [5]:
>> - fix return err
>> - introduce CONFIG_COMMON_CLK_MESON_AO
>> - format/style minor fix
>>
>> changes since v3 at [4]:
>> - add 'const' contraint to the read-only data
>> - switch to devm_of_clk_add_hw_provider API
>> - check return value of devm_reset_controller_register
>>
>> changes since v2 at [2]:
>> - rework meson_aoclkc_probe() which leverage the of_match_data
>> - merge patch 5-6 into this series
>> - seperate DTS patch, will send to Kevin Hilman independently
>>
>> changes since v1 at [0]:
>> - rebase to clk-meson's branch 'next/drivers' [1]
>> - fix license, update to BSD-3-Clause
>> - drop un-used include header file
>>
>> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
>> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
>> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
>> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
>> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com
>> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan at amlogic.com
>> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan at amlogic.com
>> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan at amlogic.com
>
> Yixun,
>
> Your series looks mostly Ok to me, apart from the problem reported by Philipp.
>
> However, once applied, if the clkc ao controller is enabled, both gxl and axg
> fail to complete the boot. Could you please explain how this was tested ??
>
isn't this caused by the patch 7?
[PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
you need to also apply this DT patch which I've sent[1]:
[PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
could you exclude the patch 7 for now until Kevin merged the DT part?
[1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan at amlogic.com
> Not merging it until we get to the bottom of this.
>
>>
>>
>> Qiufang Dai (1):
>> clk: meson-axg: Add AO Clock and Reset controller driver
>>
>> Yixun Lan (6):
>> clk: meson: migrate to devm_of_clk_add_hw_provider API
>> clk: meson: aoclk: refactor common code into dedicated file
>> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
>> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
>> clk: meson: drop CLK_SET_RATE_PARENT flag
>> clk: meson: drop CLK_IGNORE_UNUSED flag
>>
>> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
>> drivers/clk/meson/Kconfig | 8 +
>> drivers/clk/meson/Makefile | 3 +-
>> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
>> drivers/clk/meson/axg-aoclk.h | 29 ++++
>> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
>> drivers/clk/meson/gxbb-aoclk.h | 5 +
>> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
>> drivers/clk/meson/meson-aoclk.h | 34 ++++
>> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
>> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
>> 11 files changed, 401 insertions(+), 64 deletions(-)
>> create mode 100644 drivers/clk/meson/axg-aoclk.c
>> create mode 100644 drivers/clk/meson/axg-aoclk.h
>> create mode 100644 drivers/clk/meson/meson-aoclk.c
>> create mode 100644 drivers/clk/meson/meson-aoclk.h
>> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
>> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>>
>
> .
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
2018-04-27 9:31 ` Yixun Lan
(?)
(?)
@ 2018-04-27 9:59 ` Jerome Brunet
-1 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 9:59 UTC (permalink / raw)
To: Yixun Lan, Neil Armstrong, Kevin Hilman, Carlo Caione
Cc: Rob Herring, Michael Turquette, Stephen Boyd, Philipp Zabel,
Qiufang Dai, linux-amlogic, linux-clk, linux-arm-kernel,
linux-kernel, devicetree
On Fri, 2018-04-27 at 17:31 +0800, Yixun Lan wrote:
> hi Jerome:
>
>
> On 04/27/18 17:20, Jerome Brunet wrote:
> > On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> > > This patch try to add AO clock and Reset driver for Amlogic's
> > > Meson-AXG SoC.
> > > Please note that patch 7 need to wait for the DTS changes[3] merged
> > > into mainline first, otherwise it will break the serial console.
> > >
> > > patch 2: factor the common code into a dedicated file
> > > patch 3-5: add the aoclk driver for AXG SoC
> > > patch 6-7: drop unnecessary clock flags
> > >
> > > changes since v6 at [7]:
> > > - fix over 80 chars chechpatch error
> > > - add Philip's Ack on patch 5
> > > - drop extra end of newline
> > >
> > > changes since v5 at [6]:
> > > - drop unnecessary header files
> > > - add 'axg_aoclk' prefix to clk driver, make them more consistent
> > > - add missing end new line..
> > >
> > > changes since v4 at [5]:
> > > - fix return err
> > > - introduce CONFIG_COMMON_CLK_MESON_AO
> > > - format/style minor fix
> > >
> > > changes since v3 at [4]:
> > > - add 'const' contraint to the read-only data
> > > - switch to devm_of_clk_add_hw_provider API
> > > - check return value of devm_reset_controller_register
> > >
> > > changes since v2 at [2]:
> > > - rework meson_aoclkc_probe() which leverage the of_match_data
> > > - merge patch 5-6 into this series
> > > - seperate DTS patch, will send to Kevin Hilman independently
> > >
> > > changes since v1 at [0]:
> > > - rebase to clk-meson's branch 'next/drivers' [1]
> > > - fix license, update to BSD-3-Clause
> > > - drop un-used include header file
> > >
> > > [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
> > > [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
> > > [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
> > > [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
> > > [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com
> > > [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan@amlogic.com
> > > [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan@amlogic.com
> > > [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan@amlogic.com
> >
> > Yixun,
> >
> > Your series looks mostly Ok to me, apart from the problem reported by Philipp.
> >
> > However, once applied, if the clkc ao controller is enabled, both gxl and axg
> > fail to complete the boot. Could you please explain how this was tested ??
> >
>
> isn't this caused by the patch 7?
> [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
>
>
> you need to also apply this DT patch which I've sent[1]:
> [PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
>
> could you exclude the patch 7 for now until Kevin merged the DT part?
>
> [1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan@amlogic.com
Looks to be the problem indeed. But it is still an issue with how your patchset
in organized.
I can't merge this until Kevin merges the patch above, which he can't merge
until there is the clkc_ao support in axg, which is given by this series.
1# You should remove the axg part of the patch above. Kevin will be able to
merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
does not exist at this stage)
2# I can then safely merge this series - w/o breaking gxbb and gxl.
3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
changes the uart clocks at the same time.
>
>
> > Not merging it until we get to the bottom of this.
> >
> > >
> > >
> > > Qiufang Dai (1):
> > > clk: meson-axg: Add AO Clock and Reset controller driver
> > >
> > > Yixun Lan (6):
> > > clk: meson: migrate to devm_of_clk_add_hw_provider API
> > > clk: meson: aoclk: refactor common code into dedicated file
> > > dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
> > > dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
> > > clk: meson: drop CLK_SET_RATE_PARENT flag
> > > clk: meson: drop CLK_IGNORE_UNUSED flag
> > >
> > > .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
> > > drivers/clk/meson/Kconfig | 8 +
> > > drivers/clk/meson/Makefile | 3 +-
> > > drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
> > > drivers/clk/meson/axg-aoclk.h | 29 ++++
> > > drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
> > > drivers/clk/meson/gxbb-aoclk.h | 5 +
> > > drivers/clk/meson/meson-aoclk.c | 81 +++++++++
> > > drivers/clk/meson/meson-aoclk.h | 34 ++++
> > > include/dt-bindings/clock/axg-aoclkc.h | 26 +++
> > > include/dt-bindings/reset/axg-aoclkc.h | 20 +++
> > > 11 files changed, 401 insertions(+), 64 deletions(-)
> > > create mode 100644 drivers/clk/meson/axg-aoclk.c
> > > create mode 100644 drivers/clk/meson/axg-aoclk.h
> > > create mode 100644 drivers/clk/meson/meson-aoclk.c
> > > create mode 100644 drivers/clk/meson/meson-aoclk.h
> > > create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
> > > create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
> > >
> >
> > .
> >
>
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 9:59 ` Jerome Brunet
0 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 9:59 UTC (permalink / raw)
To: Yixun Lan, Neil Armstrong, Kevin Hilman, Carlo Caione
Cc: Rob Herring, Michael Turquette, Stephen Boyd, Philipp Zabel,
Qiufang Dai, linux-amlogic, linux-clk, linux-arm-kernel,
linux-kernel, devicetree
On Fri, 2018-04-27 at 17:31 +0800, Yixun Lan wrote:
> hi Jerome:
>
>
> On 04/27/18 17:20, Jerome Brunet wrote:
> > On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> > > This patch try to add AO clock and Reset driver for Amlogic's
> > > Meson-AXG SoC.
> > > Please note that patch 7 need to wait for the DTS changes[3] merged
> > > into mainline first, otherwise it will break the serial console.
> > >
> > > patch 2: factor the common code into a dedicated file
> > > patch 3-5: add the aoclk driver for AXG SoC
> > > patch 6-7: drop unnecessary clock flags
> > >
> > > changes since v6 at [7]:
> > > - fix over 80 chars chechpatch error
> > > - add Philip's Ack on patch 5
> > > - drop extra end of newline
> > >
> > > changes since v5 at [6]:
> > > - drop unnecessary header files
> > > - add 'axg_aoclk' prefix to clk driver, make them more consistent
> > > - add missing end new line..
> > >
> > > changes since v4 at [5]:
> > > - fix return err
> > > - introduce CONFIG_COMMON_CLK_MESON_AO
> > > - format/style minor fix
> > >
> > > changes since v3 at [4]:
> > > - add 'const' contraint to the read-only data
> > > - switch to devm_of_clk_add_hw_provider API
> > > - check return value of devm_reset_controller_register
> > >
> > > changes since v2 at [2]:
> > > - rework meson_aoclkc_probe() which leverage the of_match_data
> > > - merge patch 5-6 into this series
> > > - seperate DTS patch, will send to Kevin Hilman independently
> > >
> > > changes since v1 at [0]:
> > > - rebase to clk-meson's branch 'next/drivers' [1]
> > > - fix license, update to BSD-3-Clause
> > > - drop un-used include header file
> > >
> > > [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
> > > [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
> > > [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
> > > [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
> > > [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com
> > > [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan@amlogic.com
> > > [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan@amlogic.com
> > > [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan@amlogic.com
> >
> > Yixun,
> >
> > Your series looks mostly Ok to me, apart from the problem reported by Philipp.
> >
> > However, once applied, if the clkc ao controller is enabled, both gxl and axg
> > fail to complete the boot. Could you please explain how this was tested ??
> >
>
> isn't this caused by the patch 7?
> [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
>
>
> you need to also apply this DT patch which I've sent[1]:
> [PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
>
> could you exclude the patch 7 for now until Kevin merged the DT part?
>
> [1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan@amlogic.com
Looks to be the problem indeed. But it is still an issue with how your patchset
in organized.
I can't merge this until Kevin merges the patch above, which he can't merge
until there is the clkc_ao support in axg, which is given by this series.
1# You should remove the axg part of the patch above. Kevin will be able to
merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
does not exist at this stage)
2# I can then safely merge this series - w/o breaking gxbb and gxl.
3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
changes the uart clocks at the same time.
>
>
> > Not merging it until we get to the bottom of this.
> >
> > >
> > >
> > > Qiufang Dai (1):
> > > clk: meson-axg: Add AO Clock and Reset controller driver
> > >
> > > Yixun Lan (6):
> > > clk: meson: migrate to devm_of_clk_add_hw_provider API
> > > clk: meson: aoclk: refactor common code into dedicated file
> > > dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
> > > dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
> > > clk: meson: drop CLK_SET_RATE_PARENT flag
> > > clk: meson: drop CLK_IGNORE_UNUSED flag
> > >
> > > .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
> > > drivers/clk/meson/Kconfig | 8 +
> > > drivers/clk/meson/Makefile | 3 +-
> > > drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
> > > drivers/clk/meson/axg-aoclk.h | 29 ++++
> > > drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
> > > drivers/clk/meson/gxbb-aoclk.h | 5 +
> > > drivers/clk/meson/meson-aoclk.c | 81 +++++++++
> > > drivers/clk/meson/meson-aoclk.h | 34 ++++
> > > include/dt-bindings/clock/axg-aoclkc.h | 26 +++
> > > include/dt-bindings/reset/axg-aoclkc.h | 20 +++
> > > 11 files changed, 401 insertions(+), 64 deletions(-)
> > > create mode 100644 drivers/clk/meson/axg-aoclk.c
> > > create mode 100644 drivers/clk/meson/axg-aoclk.h
> > > create mode 100644 drivers/clk/meson/meson-aoclk.c
> > > create mode 100644 drivers/clk/meson/meson-aoclk.h
> > > create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
> > > create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
> > >
> >
> > .
> >
>
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 9:59 ` Jerome Brunet
0 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 9:59 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 2018-04-27 at 17:31 +0800, Yixun Lan wrote:
> hi Jerome:
>
>
> On 04/27/18 17:20, Jerome Brunet wrote:
> > On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> > > This patch try to add AO clock and Reset driver for Amlogic's
> > > Meson-AXG SoC.
> > > Please note that patch 7 need to wait for the DTS changes[3] merged
> > > into mainline first, otherwise it will break the serial console.
> > >
> > > patch 2: factor the common code into a dedicated file
> > > patch 3-5: add the aoclk driver for AXG SoC
> > > patch 6-7: drop unnecessary clock flags
> > >
> > > changes since v6 at [7]:
> > > - fix over 80 chars chechpatch error
> > > - add Philip's Ack on patch 5
> > > - drop extra end of newline
> > >
> > > changes since v5 at [6]:
> > > - drop unnecessary header files
> > > - add 'axg_aoclk' prefix to clk driver, make them more consistent
> > > - add missing end new line..
> > >
> > > changes since v4 at [5]:
> > > - fix return err
> > > - introduce CONFIG_COMMON_CLK_MESON_AO
> > > - format/style minor fix
> > >
> > > changes since v3 at [4]:
> > > - add 'const' contraint to the read-only data
> > > - switch to devm_of_clk_add_hw_provider API
> > > - check return value of devm_reset_controller_register
> > >
> > > changes since v2 at [2]:
> > > - rework meson_aoclkc_probe() which leverage the of_match_data
> > > - merge patch 5-6 into this series
> > > - seperate DTS patch, will send to Kevin Hilman independently
> > >
> > > changes since v1 at [0]:
> > > - rebase to clk-meson's branch 'next/drivers' [1]
> > > - fix license, update to BSD-3-Clause
> > > - drop un-used include header file
> > >
> > > [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
> > > [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
> > > [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
> > > [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
> > > [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com
> > > [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan at amlogic.com
> > > [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan at amlogic.com
> > > [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan at amlogic.com
> >
> > Yixun,
> >
> > Your series looks mostly Ok to me, apart from the problem reported by Philipp.
> >
> > However, once applied, if the clkc ao controller is enabled, both gxl and axg
> > fail to complete the boot. Could you please explain how this was tested ??
> >
>
> isn't this caused by the patch 7?
> [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
>
>
> you need to also apply this DT patch which I've sent[1]:
> [PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
>
> could you exclude the patch 7 for now until Kevin merged the DT part?
>
> [1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan at amlogic.com
Looks to be the problem indeed. But it is still an issue with how your patchset
in organized.
I can't merge this until Kevin merges the patch above, which he can't merge
until there is the clkc_ao support in axg, which is given by this series.
1# You should remove the axg part of the patch above. Kevin will be able to
merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
does not exist at this stage)
2# I can then safely merge this series - w/o breaking gxbb and gxl.
3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
changes the uart clocks at the same time.
>
>
> > Not merging it until we get to the bottom of this.
> >
> > >
> > >
> > > Qiufang Dai (1):
> > > clk: meson-axg: Add AO Clock and Reset controller driver
> > >
> > > Yixun Lan (6):
> > > clk: meson: migrate to devm_of_clk_add_hw_provider API
> > > clk: meson: aoclk: refactor common code into dedicated file
> > > dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
> > > dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
> > > clk: meson: drop CLK_SET_RATE_PARENT flag
> > > clk: meson: drop CLK_IGNORE_UNUSED flag
> > >
> > > .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
> > > drivers/clk/meson/Kconfig | 8 +
> > > drivers/clk/meson/Makefile | 3 +-
> > > drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
> > > drivers/clk/meson/axg-aoclk.h | 29 ++++
> > > drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
> > > drivers/clk/meson/gxbb-aoclk.h | 5 +
> > > drivers/clk/meson/meson-aoclk.c | 81 +++++++++
> > > drivers/clk/meson/meson-aoclk.h | 34 ++++
> > > include/dt-bindings/clock/axg-aoclkc.h | 26 +++
> > > include/dt-bindings/reset/axg-aoclkc.h | 20 +++
> > > 11 files changed, 401 insertions(+), 64 deletions(-)
> > > create mode 100644 drivers/clk/meson/axg-aoclk.c
> > > create mode 100644 drivers/clk/meson/axg-aoclk.h
> > > create mode 100644 drivers/clk/meson/meson-aoclk.c
> > > create mode 100644 drivers/clk/meson/meson-aoclk.h
> > > create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
> > > create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
> > >
> >
> > .
> >
>
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 9:59 ` Jerome Brunet
0 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 9:59 UTC (permalink / raw)
To: linus-amlogic
On Fri, 2018-04-27 at 17:31 +0800, Yixun Lan wrote:
> hi Jerome:
>
>
> On 04/27/18 17:20, Jerome Brunet wrote:
> > On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> > > This patch try to add AO clock and Reset driver for Amlogic's
> > > Meson-AXG SoC.
> > > Please note that patch 7 need to wait for the DTS changes[3] merged
> > > into mainline first, otherwise it will break the serial console.
> > >
> > > patch 2: factor the common code into a dedicated file
> > > patch 3-5: add the aoclk driver for AXG SoC
> > > patch 6-7: drop unnecessary clock flags
> > >
> > > changes since v6 at [7]:
> > > - fix over 80 chars chechpatch error
> > > - add Philip's Ack on patch 5
> > > - drop extra end of newline
> > >
> > > changes since v5 at [6]:
> > > - drop unnecessary header files
> > > - add 'axg_aoclk' prefix to clk driver, make them more consistent
> > > - add missing end new line..
> > >
> > > changes since v4 at [5]:
> > > - fix return err
> > > - introduce CONFIG_COMMON_CLK_MESON_AO
> > > - format/style minor fix
> > >
> > > changes since v3 at [4]:
> > > - add 'const' contraint to the read-only data
> > > - switch to devm_of_clk_add_hw_provider API
> > > - check return value of devm_reset_controller_register
> > >
> > > changes since v2 at [2]:
> > > - rework meson_aoclkc_probe() which leverage the of_match_data
> > > - merge patch 5-6 into this series
> > > - seperate DTS patch, will send to Kevin Hilman independently
> > >
> > > changes since v1 at [0]:
> > > - rebase to clk-meson's branch 'next/drivers' [1]
> > > - fix license, update to BSD-3-Clause
> > > - drop un-used include header file
> > >
> > > [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
> > > [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
> > > [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
> > > [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
> > > [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com
> > > [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan at amlogic.com
> > > [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan at amlogic.com
> > > [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan at amlogic.com
> >
> > Yixun,
> >
> > Your series looks mostly Ok to me, apart from the problem reported by Philipp.
> >
> > However, once applied, if the clkc ao controller is enabled, both gxl and axg
> > fail to complete the boot. Could you please explain how this was tested ??
> >
>
> isn't this caused by the patch 7?
> [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
>
>
> you need to also apply this DT patch which I've sent[1]:
> [PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
>
> could you exclude the patch 7 for now until Kevin merged the DT part?
>
> [1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan at amlogic.com
Looks to be the problem indeed. But it is still an issue with how your patchset
in organized.
I can't merge this until Kevin merges the patch above, which he can't merge
until there is the clkc_ao support in axg, which is given by this series.
1# You should remove the axg part of the patch above. Kevin will be able to
merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
does not exist at this stage)
2# I can then safely merge this series - w/o breaking gxbb and gxl.
3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
changes the uart clocks at the same time.
>
>
> > Not merging it until we get to the bottom of this.
> >
> > >
> > >
> > > Qiufang Dai (1):
> > > clk: meson-axg: Add AO Clock and Reset controller driver
> > >
> > > Yixun Lan (6):
> > > clk: meson: migrate to devm_of_clk_add_hw_provider API
> > > clk: meson: aoclk: refactor common code into dedicated file
> > > dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
> > > dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
> > > clk: meson: drop CLK_SET_RATE_PARENT flag
> > > clk: meson: drop CLK_IGNORE_UNUSED flag
> > >
> > > .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
> > > drivers/clk/meson/Kconfig | 8 +
> > > drivers/clk/meson/Makefile | 3 +-
> > > drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
> > > drivers/clk/meson/axg-aoclk.h | 29 ++++
> > > drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
> > > drivers/clk/meson/gxbb-aoclk.h | 5 +
> > > drivers/clk/meson/meson-aoclk.c | 81 +++++++++
> > > drivers/clk/meson/meson-aoclk.h | 34 ++++
> > > include/dt-bindings/clock/axg-aoclkc.h | 26 +++
> > > include/dt-bindings/reset/axg-aoclkc.h | 20 +++
> > > 11 files changed, 401 insertions(+), 64 deletions(-)
> > > create mode 100644 drivers/clk/meson/axg-aoclk.c
> > > create mode 100644 drivers/clk/meson/axg-aoclk.h
> > > create mode 100644 drivers/clk/meson/meson-aoclk.c
> > > create mode 100644 drivers/clk/meson/meson-aoclk.h
> > > create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
> > > create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
> > >
> >
> > .
> >
>
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 1/7] clk: meson: migrate to devm_of_clk_add_hw_provider API
2018-04-26 8:44 ` Yixun Lan
(?)
(?)
@ 2018-04-27 10:00 ` Jerome Brunet
-1 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 10:00 UTC (permalink / raw)
To: Yixun Lan, Neil Armstrong, Kevin Hilman, Carlo Caione
Cc: Rob Herring, Michael Turquette, Stephen Boyd, Philipp Zabel,
Qiufang Dai, linux-amlogic, linux-clk, linux-arm-kernel,
linux-kernel
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> There is a protential memory leak, as of_clk_del_provider is
> never called if of_clk_add_hw_provider has been executed.
> Fix this by using devm variant API.
>
> Fixes: f8c11f79912d ("clk: meson: Add GXBB AO Clock and Reset controller driver")
> Suggested-by: Stephen Boyd <sboyd@kernel.org>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> drivers/clk/meson/gxbb-aoclk.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
> index 9ec23ae9a219..eebb580b9e0f 100644
> --- a/drivers/clk/meson/gxbb-aoclk.c
> +++ b/drivers/clk/meson/gxbb-aoclk.c
> @@ -191,7 +191,7 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> &gxbb_aoclk_onecell_data);
> }
>
Applied
Thx
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 1/7] clk: meson: migrate to devm_of_clk_add_hw_provider API
@ 2018-04-27 10:00 ` Jerome Brunet
0 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 10:00 UTC (permalink / raw)
To: Yixun Lan, Neil Armstrong, Kevin Hilman, Carlo Caione
Cc: Rob Herring, Michael Turquette, Stephen Boyd, Philipp Zabel,
Qiufang Dai, linux-amlogic, linux-clk, linux-arm-kernel,
linux-kernel
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> There is a protential memory leak, as of_clk_del_provider is
> never called if of_clk_add_hw_provider has been executed.
> Fix this by using devm variant API.
>
> Fixes: f8c11f79912d ("clk: meson: Add GXBB AO Clock and Reset controller driver")
> Suggested-by: Stephen Boyd <sboyd@kernel.org>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> drivers/clk/meson/gxbb-aoclk.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
> index 9ec23ae9a219..eebb580b9e0f 100644
> --- a/drivers/clk/meson/gxbb-aoclk.c
> +++ b/drivers/clk/meson/gxbb-aoclk.c
> @@ -191,7 +191,7 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> &gxbb_aoclk_onecell_data);
> }
>
Applied
Thx
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 1/7] clk: meson: migrate to devm_of_clk_add_hw_provider API
@ 2018-04-27 10:00 ` Jerome Brunet
0 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 10:00 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> There is a protential memory leak, as of_clk_del_provider is
> never called if of_clk_add_hw_provider has been executed.
> Fix this by using devm variant API.
>
> Fixes: f8c11f79912d ("clk: meson: Add GXBB AO Clock and Reset controller driver")
> Suggested-by: Stephen Boyd <sboyd@kernel.org>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> drivers/clk/meson/gxbb-aoclk.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
> index 9ec23ae9a219..eebb580b9e0f 100644
> --- a/drivers/clk/meson/gxbb-aoclk.c
> +++ b/drivers/clk/meson/gxbb-aoclk.c
> @@ -191,7 +191,7 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> &gxbb_aoclk_onecell_data);
> }
>
Applied
Thx
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 1/7] clk: meson: migrate to devm_of_clk_add_hw_provider API
@ 2018-04-27 10:00 ` Jerome Brunet
0 siblings, 0 replies; 68+ messages in thread
From: Jerome Brunet @ 2018-04-27 10:00 UTC (permalink / raw)
To: linus-amlogic
On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
> There is a protential memory leak, as of_clk_del_provider is
> never called if of_clk_add_hw_provider has been executed.
> Fix this by using devm variant API.
>
> Fixes: f8c11f79912d ("clk: meson: Add GXBB AO Clock and Reset controller driver")
> Suggested-by: Stephen Boyd <sboyd@kernel.org>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> drivers/clk/meson/gxbb-aoclk.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
> index 9ec23ae9a219..eebb580b9e0f 100644
> --- a/drivers/clk/meson/gxbb-aoclk.c
> +++ b/drivers/clk/meson/gxbb-aoclk.c
> @@ -191,7 +191,7 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> &gxbb_aoclk_onecell_data);
> }
>
Applied
Thx
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
2018-04-27 9:59 ` Jerome Brunet
(?)
(?)
@ 2018-04-27 12:33 ` Yixun Lan
-1 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-27 12:33 UTC (permalink / raw)
To: Jerome Brunet, Neil Armstrong, Kevin Hilman, Carlo Caione
Cc: yixun.lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel, devicetree
Hi Jerome:
On 04/27/2018 05:59 PM, Jerome Brunet wrote:
> On Fri, 2018-04-27 at 17:31 +0800, Yixun Lan wrote:
>> hi Jerome:
>>
>>
>> On 04/27/18 17:20, Jerome Brunet wrote:
>>> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>>>> This patch try to add AO clock and Reset driver for Amlogic's
>>>> Meson-AXG SoC.
>>>> Please note that patch 7 need to wait for the DTS changes[3] merged
>>>> into mainline first, otherwise it will break the serial console.
>>>>
>>>> patch 2: factor the common code into a dedicated file
>>>> patch 3-5: add the aoclk driver for AXG SoC
>>>> patch 6-7: drop unnecessary clock flags
>>>>
>>>> changes since v6 at [7]:
>>>> - fix over 80 chars chechpatch error
>>>> - add Philip's Ack on patch 5
>>>> - drop extra end of newline
>>>>
>>>> changes since v5 at [6]:
>>>> - drop unnecessary header files
>>>> - add 'axg_aoclk' prefix to clk driver, make them more consistent
>>>> - add missing end new line..
>>>>
>>>> changes since v4 at [5]:
>>>> - fix return err
>>>> - introduce CONFIG_COMMON_CLK_MESON_AO
>>>> - format/style minor fix
>>>>
>>>> changes since v3 at [4]:
>>>> - add 'const' contraint to the read-only data
>>>> - switch to devm_of_clk_add_hw_provider API
>>>> - check return value of devm_reset_controller_register
>>>>
>>>> changes since v2 at [2]:
>>>> - rework meson_aoclkc_probe() which leverage the of_match_data
>>>> - merge patch 5-6 into this series
>>>> - seperate DTS patch, will send to Kevin Hilman independently
>>>>
>>>> changes since v1 at [0]:
>>>> - rebase to clk-meson's branch 'next/drivers' [1]
>>>> - fix license, update to BSD-3-Clause
>>>> - drop un-used include header file
>>>>
>>>> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
>>>> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
>>>> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
>>>> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
>>>> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com
>>>> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan@amlogic.com
>>>> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan@amlogic.com
>>>> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan@amlogic.com
>>>
>>> Yixun,
>>>
>>> Your series looks mostly Ok to me, apart from the problem reported by Philipp.
>>>
>>> However, once applied, if the clkc ao controller is enabled, both gxl and axg
>>> fail to complete the boot. Could you please explain how this was tested ??
>>>
>>
>> isn't this caused by the patch 7?
>> [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
>>
>>
>> you need to also apply this DT patch which I've sent[1]:
>> [PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
>>
>> could you exclude the patch 7 for now until Kevin merged the DT part?
>>
>> [1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan@amlogic.com
>
> Looks to be the problem indeed. But it is still an issue with how your patchset
> in organized.
>
> I can't merge this until Kevin merges the patch above, which he can't merge
> until there is the clkc_ao support in axg, which is given by this series.
>
> 1# You should remove the axg part of the patch above. Kevin will be able to
> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
> does not exist at this stage)
> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
> changes the uart clocks at the same time.
>
I didn't make myself clear in previous email
I mean, could you merge patch 1-6, just exclude the patch 7
then kevin can merge the DT part (there are three patches) [1]
after the DT patches merged, then you can take this patch 7
This way, it won't break gxl or any other SoCs
I'm sending patch 7 along with this series, it would be better if I
give a warning about it.
[1] https://lkml.kernel.org/r20180328030130.240336-1-yixun.lan@amlogic.com
>>
>>
>>> Not merging it until we get to the bottom of this.
>>>
>>>>
>>>>
>>>> Qiufang Dai (1):
>>>> clk: meson-axg: Add AO Clock and Reset controller driver
>>>>
>>>> Yixun Lan (6):
>>>> clk: meson: migrate to devm_of_clk_add_hw_provider API
>>>> clk: meson: aoclk: refactor common code into dedicated file
>>>> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
>>>> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
>>>> clk: meson: drop CLK_SET_RATE_PARENT flag
>>>> clk: meson: drop CLK_IGNORE_UNUSED flag
>>>>
>>>> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
>>>> drivers/clk/meson/Kconfig | 8 +
>>>> drivers/clk/meson/Makefile | 3 +-
>>>> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
>>>> drivers/clk/meson/axg-aoclk.h | 29 ++++
>>>> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
>>>> drivers/clk/meson/gxbb-aoclk.h | 5 +
>>>> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
>>>> drivers/clk/meson/meson-aoclk.h | 34 ++++
>>>> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
>>>> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
>>>> 11 files changed, 401 insertions(+), 64 deletions(-)
>>>> create mode 100644 drivers/clk/meson/axg-aoclk.c
>>>> create mode 100644 drivers/clk/meson/axg-aoclk.h
>>>> create mode 100644 drivers/clk/meson/meson-aoclk.c
>>>> create mode 100644 drivers/clk/meson/meson-aoclk.h
>>>> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
>>>> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>>>>
>>>
>>> .
>>>
>>
>>
>
> .
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 12:33 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-27 12:33 UTC (permalink / raw)
To: Jerome Brunet, Neil Armstrong, Kevin Hilman, Carlo Caione
Cc: yixun.lan, Rob Herring, Michael Turquette, Stephen Boyd,
Philipp Zabel, Qiufang Dai, linux-amlogic, linux-clk,
linux-arm-kernel, linux-kernel, devicetree
Hi Jerome:
On 04/27/2018 05:59 PM, Jerome Brunet wrote:
> On Fri, 2018-04-27 at 17:31 +0800, Yixun Lan wrote:
>> hi Jerome:
>>
>>
>> On 04/27/18 17:20, Jerome Brunet wrote:
>>> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>>>> This patch try to add AO clock and Reset driver for Amlogic's
>>>> Meson-AXG SoC.
>>>> Please note that patch 7 need to wait for the DTS changes[3] merged
>>>> into mainline first, otherwise it will break the serial console.
>>>>
>>>> patch 2: factor the common code into a dedicated file
>>>> patch 3-5: add the aoclk driver for AXG SoC
>>>> patch 6-7: drop unnecessary clock flags
>>>>
>>>> changes since v6 at [7]:
>>>> - fix over 80 chars chechpatch error
>>>> - add Philip's Ack on patch 5
>>>> - drop extra end of newline
>>>>
>>>> changes since v5 at [6]:
>>>> - drop unnecessary header files
>>>> - add 'axg_aoclk' prefix to clk driver, make them more consistent
>>>> - add missing end new line..
>>>>
>>>> changes since v4 at [5]:
>>>> - fix return err
>>>> - introduce CONFIG_COMMON_CLK_MESON_AO
>>>> - format/style minor fix
>>>>
>>>> changes since v3 at [4]:
>>>> - add 'const' contraint to the read-only data
>>>> - switch to devm_of_clk_add_hw_provider API
>>>> - check return value of devm_reset_controller_register
>>>>
>>>> changes since v2 at [2]:
>>>> - rework meson_aoclkc_probe() which leverage the of_match_data
>>>> - merge patch 5-6 into this series
>>>> - seperate DTS patch, will send to Kevin Hilman independently
>>>>
>>>> changes since v1 at [0]:
>>>> - rebase to clk-meson's branch 'next/drivers' [1]
>>>> - fix license, update to BSD-3-Clause
>>>> - drop un-used include header file
>>>>
>>>> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
>>>> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
>>>> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
>>>> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
>>>> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com
>>>> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan@amlogic.com
>>>> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan@amlogic.com
>>>> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan@amlogic.com
>>>
>>> Yixun,
>>>
>>> Your series looks mostly Ok to me, apart from the problem reported by Philipp.
>>>
>>> However, once applied, if the clkc ao controller is enabled, both gxl and axg
>>> fail to complete the boot. Could you please explain how this was tested ??
>>>
>>
>> isn't this caused by the patch 7?
>> [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
>>
>>
>> you need to also apply this DT patch which I've sent[1]:
>> [PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
>>
>> could you exclude the patch 7 for now until Kevin merged the DT part?
>>
>> [1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan@amlogic.com
>
> Looks to be the problem indeed. But it is still an issue with how your patchset
> in organized.
>
> I can't merge this until Kevin merges the patch above, which he can't merge
> until there is the clkc_ao support in axg, which is given by this series.
>
> 1# You should remove the axg part of the patch above. Kevin will be able to
> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
> does not exist at this stage)
> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
> changes the uart clocks at the same time.
>
I didn't make myself clear in previous email
I mean, could you merge patch 1-6, just exclude the patch 7
then kevin can merge the DT part (there are three patches) [1]
after the DT patches merged, then you can take this patch 7
This way, it won't break gxl or any other SoCs
I'm sending patch 7 along with this series, it would be better if I
give a warning about it.
[1] https://lkml.kernel.org/r20180328030130.240336-1-yixun.lan@amlogic.com
>>
>>
>>> Not merging it until we get to the bottom of this.
>>>
>>>>
>>>>
>>>> Qiufang Dai (1):
>>>> clk: meson-axg: Add AO Clock and Reset controller driver
>>>>
>>>> Yixun Lan (6):
>>>> clk: meson: migrate to devm_of_clk_add_hw_provider API
>>>> clk: meson: aoclk: refactor common code into dedicated file
>>>> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
>>>> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
>>>> clk: meson: drop CLK_SET_RATE_PARENT flag
>>>> clk: meson: drop CLK_IGNORE_UNUSED flag
>>>>
>>>> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
>>>> drivers/clk/meson/Kconfig | 8 +
>>>> drivers/clk/meson/Makefile | 3 +-
>>>> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
>>>> drivers/clk/meson/axg-aoclk.h | 29 ++++
>>>> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
>>>> drivers/clk/meson/gxbb-aoclk.h | 5 +
>>>> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
>>>> drivers/clk/meson/meson-aoclk.h | 34 ++++
>>>> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
>>>> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
>>>> 11 files changed, 401 insertions(+), 64 deletions(-)
>>>> create mode 100644 drivers/clk/meson/axg-aoclk.c
>>>> create mode 100644 drivers/clk/meson/axg-aoclk.h
>>>> create mode 100644 drivers/clk/meson/meson-aoclk.c
>>>> create mode 100644 drivers/clk/meson/meson-aoclk.h
>>>> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
>>>> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>>>>
>>>
>>> .
>>>
>>
>>
>
> .
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 12:33 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-27 12:33 UTC (permalink / raw)
To: linux-arm-kernel
Hi Jerome:
On 04/27/2018 05:59 PM, Jerome Brunet wrote:
> On Fri, 2018-04-27 at 17:31 +0800, Yixun Lan wrote:
>> hi Jerome:
>>
>>
>> On 04/27/18 17:20, Jerome Brunet wrote:
>>> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>>>> This patch try to add AO clock and Reset driver for Amlogic's
>>>> Meson-AXG SoC.
>>>> Please note that patch 7 need to wait for the DTS changes[3] merged
>>>> into mainline first, otherwise it will break the serial console.
>>>>
>>>> patch 2: factor the common code into a dedicated file
>>>> patch 3-5: add the aoclk driver for AXG SoC
>>>> patch 6-7: drop unnecessary clock flags
>>>>
>>>> changes since v6 at [7]:
>>>> - fix over 80 chars chechpatch error
>>>> - add Philip's Ack on patch 5
>>>> - drop extra end of newline
>>>>
>>>> changes since v5 at [6]:
>>>> - drop unnecessary header files
>>>> - add 'axg_aoclk' prefix to clk driver, make them more consistent
>>>> - add missing end new line..
>>>>
>>>> changes since v4 at [5]:
>>>> - fix return err
>>>> - introduce CONFIG_COMMON_CLK_MESON_AO
>>>> - format/style minor fix
>>>>
>>>> changes since v3 at [4]:
>>>> - add 'const' contraint to the read-only data
>>>> - switch to devm_of_clk_add_hw_provider API
>>>> - check return value of devm_reset_controller_register
>>>>
>>>> changes since v2 at [2]:
>>>> - rework meson_aoclkc_probe() which leverage the of_match_data
>>>> - merge patch 5-6 into this series
>>>> - seperate DTS patch, will send to Kevin Hilman independently
>>>>
>>>> changes since v1 at [0]:
>>>> - rebase to clk-meson's branch 'next/drivers' [1]
>>>> - fix license, update to BSD-3-Clause
>>>> - drop un-used include header file
>>>>
>>>> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
>>>> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
>>>> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
>>>> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
>>>> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com
>>>> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan at amlogic.com
>>>> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan at amlogic.com
>>>> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan at amlogic.com
>>>
>>> Yixun,
>>>
>>> Your series looks mostly Ok to me, apart from the problem reported by Philipp.
>>>
>>> However, once applied, if the clkc ao controller is enabled, both gxl and axg
>>> fail to complete the boot. Could you please explain how this was tested ??
>>>
>>
>> isn't this caused by the patch 7?
>> [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
>>
>>
>> you need to also apply this DT patch which I've sent[1]:
>> [PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
>>
>> could you exclude the patch 7 for now until Kevin merged the DT part?
>>
>> [1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan at amlogic.com
>
> Looks to be the problem indeed. But it is still an issue with how your patchset
> in organized.
>
> I can't merge this until Kevin merges the patch above, which he can't merge
> until there is the clkc_ao support in axg, which is given by this series.
>
> 1# You should remove the axg part of the patch above. Kevin will be able to
> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
> does not exist at this stage)
> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
> changes the uart clocks at the same time.
>
I didn't make myself clear in previous email
I mean, could you merge patch 1-6, just exclude the patch 7
then kevin can merge the DT part (there are three patches) [1]
after the DT patches merged, then you can take this patch 7
This way, it won't break gxl or any other SoCs
I'm sending patch 7 along with this series, it would be better if I
give a warning about it.
[1] https://lkml.kernel.org/r20180328030130.240336-1-yixun.lan at amlogic.com
>>
>>
>>> Not merging it until we get to the bottom of this.
>>>
>>>>
>>>>
>>>> Qiufang Dai (1):
>>>> clk: meson-axg: Add AO Clock and Reset controller driver
>>>>
>>>> Yixun Lan (6):
>>>> clk: meson: migrate to devm_of_clk_add_hw_provider API
>>>> clk: meson: aoclk: refactor common code into dedicated file
>>>> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
>>>> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
>>>> clk: meson: drop CLK_SET_RATE_PARENT flag
>>>> clk: meson: drop CLK_IGNORE_UNUSED flag
>>>>
>>>> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
>>>> drivers/clk/meson/Kconfig | 8 +
>>>> drivers/clk/meson/Makefile | 3 +-
>>>> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
>>>> drivers/clk/meson/axg-aoclk.h | 29 ++++
>>>> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
>>>> drivers/clk/meson/gxbb-aoclk.h | 5 +
>>>> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
>>>> drivers/clk/meson/meson-aoclk.h | 34 ++++
>>>> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
>>>> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
>>>> 11 files changed, 401 insertions(+), 64 deletions(-)
>>>> create mode 100644 drivers/clk/meson/axg-aoclk.c
>>>> create mode 100644 drivers/clk/meson/axg-aoclk.h
>>>> create mode 100644 drivers/clk/meson/meson-aoclk.c
>>>> create mode 100644 drivers/clk/meson/meson-aoclk.h
>>>> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
>>>> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>>>>
>>>
>>> .
>>>
>>
>>
>
> .
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 12:33 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-27 12:33 UTC (permalink / raw)
To: linus-amlogic
Hi Jerome:
On 04/27/2018 05:59 PM, Jerome Brunet wrote:
> On Fri, 2018-04-27 at 17:31 +0800, Yixun Lan wrote:
>> hi Jerome:
>>
>>
>> On 04/27/18 17:20, Jerome Brunet wrote:
>>> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>>>> This patch try to add AO clock and Reset driver for Amlogic's
>>>> Meson-AXG SoC.
>>>> Please note that patch 7 need to wait for the DTS changes[3] merged
>>>> into mainline first, otherwise it will break the serial console.
>>>>
>>>> patch 2: factor the common code into a dedicated file
>>>> patch 3-5: add the aoclk driver for AXG SoC
>>>> patch 6-7: drop unnecessary clock flags
>>>>
>>>> changes since v6 at [7]:
>>>> - fix over 80 chars chechpatch error
>>>> - add Philip's Ack on patch 5
>>>> - drop extra end of newline
>>>>
>>>> changes since v5 at [6]:
>>>> - drop unnecessary header files
>>>> - add 'axg_aoclk' prefix to clk driver, make them more consistent
>>>> - add missing end new line..
>>>>
>>>> changes since v4 at [5]:
>>>> - fix return err
>>>> - introduce CONFIG_COMMON_CLK_MESON_AO
>>>> - format/style minor fix
>>>>
>>>> changes since v3 at [4]:
>>>> - add 'const' contraint to the read-only data
>>>> - switch to devm_of_clk_add_hw_provider API
>>>> - check return value of devm_reset_controller_register
>>>>
>>>> changes since v2 at [2]:
>>>> - rework meson_aoclkc_probe() which leverage the of_match_data
>>>> - merge patch 5-6 into this series
>>>> - seperate DTS patch, will send to Kevin Hilman independently
>>>>
>>>> changes since v1 at [0]:
>>>> - rebase to clk-meson's branch 'next/drivers' [1]
>>>> - fix license, update to BSD-3-Clause
>>>> - drop un-used include header file
>>>>
>>>> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
>>>> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
>>>> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
>>>> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
>>>> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com
>>>> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan at amlogic.com
>>>> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan at amlogic.com
>>>> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan at amlogic.com
>>>
>>> Yixun,
>>>
>>> Your series looks mostly Ok to me, apart from the problem reported by Philipp.
>>>
>>> However, once applied, if the clkc ao controller is enabled, both gxl and axg
>>> fail to complete the boot. Could you please explain how this was tested ??
>>>
>>
>> isn't this caused by the patch 7?
>> [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
>>
>>
>> you need to also apply this DT patch which I've sent[1]:
>> [PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
>>
>> could you exclude the patch 7 for now until Kevin merged the DT part?
>>
>> [1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan at amlogic.com
>
> Looks to be the problem indeed. But it is still an issue with how your patchset
> in organized.
>
> I can't merge this until Kevin merges the patch above, which he can't merge
> until there is the clkc_ao support in axg, which is given by this series.
>
> 1# You should remove the axg part of the patch above. Kevin will be able to
> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
> does not exist at this stage)
> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
> changes the uart clocks at the same time.
>
I didn't make myself clear in previous email
I mean, could you merge patch 1-6, just exclude the patch 7
then kevin can merge the DT part (there are three patches) [1]
after the DT patches merged, then you can take this patch 7
This way, it won't break gxl or any other SoCs
I'm sending patch 7 along with this series, it would be better if I
give a warning about it.
[1] https://lkml.kernel.org/r20180328030130.240336-1-yixun.lan at amlogic.com
>>
>>
>>> Not merging it until we get to the bottom of this.
>>>
>>>>
>>>>
>>>> Qiufang Dai (1):
>>>> clk: meson-axg: Add AO Clock and Reset controller driver
>>>>
>>>> Yixun Lan (6):
>>>> clk: meson: migrate to devm_of_clk_add_hw_provider API
>>>> clk: meson: aoclk: refactor common code into dedicated file
>>>> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
>>>> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
>>>> clk: meson: drop CLK_SET_RATE_PARENT flag
>>>> clk: meson: drop CLK_IGNORE_UNUSED flag
>>>>
>>>> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
>>>> drivers/clk/meson/Kconfig | 8 +
>>>> drivers/clk/meson/Makefile | 3 +-
>>>> drivers/clk/meson/axg-aoclk.c | 163 ++++++++++++++++++
>>>> drivers/clk/meson/axg-aoclk.h | 29 ++++
>>>> drivers/clk/meson/gxbb-aoclk.c | 95 ++++------
>>>> drivers/clk/meson/gxbb-aoclk.h | 5 +
>>>> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
>>>> drivers/clk/meson/meson-aoclk.h | 34 ++++
>>>> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
>>>> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
>>>> 11 files changed, 401 insertions(+), 64 deletions(-)
>>>> create mode 100644 drivers/clk/meson/axg-aoclk.c
>>>> create mode 100644 drivers/clk/meson/axg-aoclk.h
>>>> create mode 100644 drivers/clk/meson/meson-aoclk.c
>>>> create mode 100644 drivers/clk/meson/meson-aoclk.h
>>>> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
>>>> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>>>>
>>>
>>> .
>>>
>>
>>
>
> .
>
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
2018-04-27 12:33 ` Yixun Lan
` (2 preceding siblings ...)
(?)
@ 2018-04-27 18:49 ` Kevin Hilman
-1 siblings, 0 replies; 68+ messages in thread
From: Kevin Hilman @ 2018-04-27 18:49 UTC (permalink / raw)
To: Yixun Lan
Cc: Jerome Brunet, Neil Armstrong, Carlo Caione, Rob Herring,
Michael Turquette, Stephen Boyd, Philipp Zabel, Qiufang Dai,
linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel,
devicetree
Hi Yixun,
Yixun Lan <yixun.lan@amlogic.com> writes:
> On 04/27/2018 05:59 PM, Jerome Brunet wrote:
[...]
>>
>> Looks to be the problem indeed. But it is still an issue with how your patchset
>> in organized.
>>
>> I can't merge this until Kevin merges the patch above, which he can't merge
>> until there is the clkc_ao support in axg, which is given by this series.
>>
>> 1# You should remove the axg part of the patch above. Kevin will be able to
>> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
>> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
>> does not exist at this stage)
>> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
>> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
>> changes the uart clocks at the same time.
>>
>
> I didn't make myself clear in previous email
>
> I mean, could you merge patch 1-6, just exclude the patch 7
> then kevin can merge the DT part (there are three patches) [1]
> after the DT patches merged, then you can take this patch 7
> This way, it won't break gxl or any other SoCs
>
> I'm sending patch 7 along with this series, it would be better if I
> give a warning about it.
Your proposal requires extra work from a couple different maintainers to
track all the dependencies, and is very error prone. Sometimes
maintainers may do this for you if they have time and are feeling
generous, but you will have much more success if you can ease the
process.
Jerome has provided lots of guidance throughout this series and just
above has provided you with a very good proposal above which minimizes
the dependencies, and provides the changes in the right order.
Please follow Jerome's suggestion,
Thanks,
Kevin
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 18:49 ` Kevin Hilman
0 siblings, 0 replies; 68+ messages in thread
From: Kevin Hilman @ 2018-04-27 18:49 UTC (permalink / raw)
To: Yixun Lan
Cc: Jerome Brunet, Neil Armstrong, Carlo Caione, Rob Herring,
Michael Turquette, Stephen Boyd, Philipp Zabel, Qiufang Dai,
linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel,
devicetree
Hi Yixun,
Yixun Lan <yixun.lan@amlogic.com> writes:
> On 04/27/2018 05:59 PM, Jerome Brunet wrote:
[...]
>>
>> Looks to be the problem indeed. But it is still an issue with how your patchset
>> in organized.
>>
>> I can't merge this until Kevin merges the patch above, which he can't merge
>> until there is the clkc_ao support in axg, which is given by this series.
>>
>> 1# You should remove the axg part of the patch above. Kevin will be able to
>> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
>> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
>> does not exist at this stage)
>> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
>> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
>> changes the uart clocks at the same time.
>>
>
> I didn't make myself clear in previous email
>
> I mean, could you merge patch 1-6, just exclude the patch 7
> then kevin can merge the DT part (there are three patches) [1]
> after the DT patches merged, then you can take this patch 7
> This way, it won't break gxl or any other SoCs
>
> I'm sending patch 7 along with this series, it would be better if I
> give a warning about it.
Your proposal requires extra work from a couple different maintainers to
track all the dependencies, and is very error prone. Sometimes
maintainers may do this for you if they have time and are feeling
generous, but you will have much more success if you can ease the
process.
Jerome has provided lots of guidance throughout this series and just
above has provided you with a very good proposal above which minimizes
the dependencies, and provides the changes in the right order.
Please follow Jerome's suggestion,
Thanks,
Kevin
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 18:49 ` Kevin Hilman
0 siblings, 0 replies; 68+ messages in thread
From: Kevin Hilman @ 2018-04-27 18:49 UTC (permalink / raw)
To: Yixun Lan
Cc: Jerome Brunet, Neil Armstrong, Carlo Caione, Rob Herring,
Michael Turquette, Stephen Boyd, Philipp Zabel, Qiufang Dai,
linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel,
devicetree
Hi Yixun,
Yixun Lan <yixun.lan@amlogic.com> writes:
> On 04/27/2018 05:59 PM, Jerome Brunet wrote:
[...]
>>
>> Looks to be the problem indeed. But it is still an issue with how your patchset
>> in organized.
>>
>> I can't merge this until Kevin merges the patch above, which he can't merge
>> until there is the clkc_ao support in axg, which is given by this series.
>>
>> 1# You should remove the axg part of the patch above. Kevin will be able to
>> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
>> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
>> does not exist at this stage)
>> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
>> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
>> changes the uart clocks at the same time.
>>
>
> I didn't make myself clear in previous email
>
> I mean, could you merge patch 1-6, just exclude the patch 7
> then kevin can merge the DT part (there are three patches) [1]
> after the DT patches merged, then you can take this patch 7
> This way, it won't break gxl or any other SoCs
>
> I'm sending patch 7 along with this series, it would be better if I
> give a warning about it.
Your proposal requires extra work from a couple different maintainers to
track all the dependencies, and is very error prone. Sometimes
maintainers may do this for you if they have time and are feeling
generous, but you will have much more success if you can ease the
process.
Jerome has provided lots of guidance throughout this series and just
above has provided you with a very good proposal above which minimizes
the dependencies, and provides the changes in the right order.
Please follow Jerome's suggestion,
Thanks,
Kevin
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 18:49 ` Kevin Hilman
0 siblings, 0 replies; 68+ messages in thread
From: Kevin Hilman @ 2018-04-27 18:49 UTC (permalink / raw)
To: linux-arm-kernel
Hi Yixun,
Yixun Lan <yixun.lan@amlogic.com> writes:
> On 04/27/2018 05:59 PM, Jerome Brunet wrote:
[...]
>>
>> Looks to be the problem indeed. But it is still an issue with how your patchset
>> in organized.
>>
>> I can't merge this until Kevin merges the patch above, which he can't merge
>> until there is the clkc_ao support in axg, which is given by this series.
>>
>> 1# You should remove the axg part of the patch above. Kevin will be able to
>> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
>> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
>> does not exist at this stage)
>> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
>> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
>> changes the uart clocks at the same time.
>>
>
> I didn't make myself clear in previous email
>
> I mean, could you merge patch 1-6, just exclude the patch 7
> then kevin can merge the DT part (there are three patches) [1]
> after the DT patches merged, then you can take this patch 7
> This way, it won't break gxl or any other SoCs
>
> I'm sending patch 7 along with this series, it would be better if I
> give a warning about it.
Your proposal requires extra work from a couple different maintainers to
track all the dependencies, and is very error prone. Sometimes
maintainers may do this for you if they have time and are feeling
generous, but you will have much more success if you can ease the
process.
Jerome has provided lots of guidance throughout this series and just
above has provided you with a very good proposal above which minimizes
the dependencies, and provides the changes in the right order.
Please follow Jerome's suggestion,
Thanks,
Kevin
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-27 18:49 ` Kevin Hilman
0 siblings, 0 replies; 68+ messages in thread
From: Kevin Hilman @ 2018-04-27 18:49 UTC (permalink / raw)
To: linus-amlogic
Hi Yixun,
Yixun Lan <yixun.lan@amlogic.com> writes:
> On 04/27/2018 05:59 PM, Jerome Brunet wrote:
[...]
>>
>> Looks to be the problem indeed. But it is still an issue with how your patchset
>> in organized.
>>
>> I can't merge this until Kevin merges the patch above, which he can't merge
>> until there is the clkc_ao support in axg, which is given by this series.
>>
>> 1# You should remove the axg part of the patch above. Kevin will be able to
>> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
>> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
>> does not exist at this stage)
>> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
>> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
>> changes the uart clocks at the same time.
>>
>
> I didn't make myself clear in previous email
>
> I mean, could you merge patch 1-6, just exclude the patch 7
> then kevin can merge the DT part (there are three patches) [1]
> after the DT patches merged, then you can take this patch 7
> This way, it won't break gxl or any other SoCs
>
> I'm sending patch 7 along with this series, it would be better if I
> give a warning about it.
Your proposal requires extra work from a couple different maintainers to
track all the dependencies, and is very error prone. Sometimes
maintainers may do this for you if they have time and are feeling
generous, but you will have much more success if you can ease the
process.
Jerome has provided lots of guidance throughout this series and just
above has provided you with a very good proposal above which minimizes
the dependencies, and provides the changes in the right order.
Please follow Jerome's suggestion,
Thanks,
Kevin
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
2018-04-27 18:49 ` Kevin Hilman
(?)
(?)
@ 2018-04-28 1:50 ` Yixun Lan
-1 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-28 1:50 UTC (permalink / raw)
To: Kevin Hilman
Cc: yixun.lan, Jerome Brunet, Neil Armstrong, Carlo Caione,
Rob Herring, Michael Turquette, Stephen Boyd, Philipp Zabel,
Qiufang Dai, linux-amlogic, linux-clk, linux-arm-kernel,
linux-kernel, devicetree
Hi Kevin
On 04/28/18 02:49, Kevin Hilman wrote:
> Hi Yixun,
>
> Yixun Lan <yixun.lan@amlogic.com> writes:
>
>> On 04/27/2018 05:59 PM, Jerome Brunet wrote:
>
> [...]
>
>>>
>>> Looks to be the problem indeed. But it is still an issue with how your patchset
>>> in organized.
>>>
>>> I can't merge this until Kevin merges the patch above, which he can't merge
>>> until there is the clkc_ao support in axg, which is given by this series.
>>>
>>> 1# You should remove the axg part of the patch above. Kevin will be able to
>>> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
>>> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
>>> does not exist at this stage)
>>> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
>>> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
>>> changes the uart clocks at the same time.
>>>
>>
>> I didn't make myself clear in previous email
>>
>> I mean, could you merge patch 1-6, just exclude the patch 7
>> then kevin can merge the DT part (there are three patches) [1]
>> after the DT patches merged, then you can take this patch 7
>> This way, it won't break gxl or any other SoCs
>>
>> I'm sending patch 7 along with this series, it would be better if I
>> give a warning about it.
>
> Your proposal requires extra work from a couple different maintainers to
> track all the dependencies, and is very error prone. Sometimes
> maintainers may do this for you if they have time and are feeling
> generous, but you will have much more success if you can ease the
> process.
>
Indeed
I've actually put a note in the cover letter to highlight special
attention needed for patch 7, but turns out rely on maintainers to
handle the dependencies isn't a wise idea
Lesson has been learned here, and I'll handle dependencies myself next
time.
> Jerome has provided lots of guidance throughout this series and just
> above has provided you with a very good proposal above which minimizes
> the dependencies, and provides the changes in the right order.
>
> Please follow Jerome's suggestion,
>
as already replied in my previous email, again here is my approach
a) I'll send patch 2-6, just leave out patch 7 for now, and as patch 1
is already accepted.. this way it won't break gxbb/gxl (the OLD SoC)
b) will pin you to require DT patch merged or re-send if necessary (as
till now the clkao driver is merged)
c) send out the patch 7 for UART AO clock fix
this is exactly what Jerome suggested..
Thank you
Yixun
^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-28 1:50 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-28 1:50 UTC (permalink / raw)
To: Kevin Hilman
Cc: yixun.lan, Jerome Brunet, Neil Armstrong, Carlo Caione,
Rob Herring, Michael Turquette, Stephen Boyd, Philipp Zabel,
Qiufang Dai, linux-amlogic, linux-clk, linux-arm-kernel,
linux-kernel, devicetree
Hi Kevin
On 04/28/18 02:49, Kevin Hilman wrote:
> Hi Yixun,
>
> Yixun Lan <yixun.lan@amlogic.com> writes:
>
>> On 04/27/2018 05:59 PM, Jerome Brunet wrote:
>
> [...]
>
>>>
>>> Looks to be the problem indeed. But it is still an issue with how your patchset
>>> in organized.
>>>
>>> I can't merge this until Kevin merges the patch above, which he can't merge
>>> until there is the clkc_ao support in axg, which is given by this series.
>>>
>>> 1# You should remove the axg part of the patch above. Kevin will be able to
>>> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
>>> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
>>> does not exist at this stage)
>>> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
>>> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
>>> changes the uart clocks at the same time.
>>>
>>
>> I didn't make myself clear in previous email
>>
>> I mean, could you merge patch 1-6, just exclude the patch 7
>> then kevin can merge the DT part (there are three patches) [1]
>> after the DT patches merged, then you can take this patch 7
>> This way, it won't break gxl or any other SoCs
>>
>> I'm sending patch 7 along with this series, it would be better if I
>> give a warning about it.
>
> Your proposal requires extra work from a couple different maintainers to
> track all the dependencies, and is very error prone. Sometimes
> maintainers may do this for you if they have time and are feeling
> generous, but you will have much more success if you can ease the
> process.
>
Indeed
I've actually put a note in the cover letter to highlight special
attention needed for patch 7, but turns out rely on maintainers to
handle the dependencies isn't a wise idea
Lesson has been learned here, and I'll handle dependencies myself next
time.
> Jerome has provided lots of guidance throughout this series and just
> above has provided you with a very good proposal above which minimizes
> the dependencies, and provides the changes in the right order.
>
> Please follow Jerome's suggestion,
>
as already replied in my previous email, again here is my approach
a) I'll send patch 2-6, just leave out patch 7 for now, and as patch 1
is already accepted.. this way it won't break gxbb/gxl (the OLD SoC)
b) will pin you to require DT patch merged or re-send if necessary (as
till now the clkao driver is merged)
c) send out the patch 7 for UART AO clock fix
this is exactly what Jerome suggested..
Thank you
Yixun
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-28 1:50 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-28 1:50 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kevin
On 04/28/18 02:49, Kevin Hilman wrote:
> Hi Yixun,
>
> Yixun Lan <yixun.lan@amlogic.com> writes:
>
>> On 04/27/2018 05:59 PM, Jerome Brunet wrote:
>
> [...]
>
>>>
>>> Looks to be the problem indeed. But it is still an issue with how your patchset
>>> in organized.
>>>
>>> I can't merge this until Kevin merges the patch above, which he can't merge
>>> until there is the clkc_ao support in axg, which is given by this series.
>>>
>>> 1# You should remove the axg part of the patch above. Kevin will be able to
>>> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
>>> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
>>> does not exist at this stage)
>>> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
>>> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
>>> changes the uart clocks at the same time.
>>>
>>
>> I didn't make myself clear in previous email
>>
>> I mean, could you merge patch 1-6, just exclude the patch 7
>> then kevin can merge the DT part (there are three patches) [1]
>> after the DT patches merged, then you can take this patch 7
>> This way, it won't break gxl or any other SoCs
>>
>> I'm sending patch 7 along with this series, it would be better if I
>> give a warning about it.
>
> Your proposal requires extra work from a couple different maintainers to
> track all the dependencies, and is very error prone. Sometimes
> maintainers may do this for you if they have time and are feeling
> generous, but you will have much more success if you can ease the
> process.
>
Indeed
I've actually put a note in the cover letter to highlight special
attention needed for patch 7, but turns out rely on maintainers to
handle the dependencies isn't a wise idea
Lesson has been learned here, and I'll handle dependencies myself next
time.
> Jerome has provided lots of guidance throughout this series and just
> above has provided you with a very good proposal above which minimizes
> the dependencies, and provides the changes in the right order.
>
> Please follow Jerome's suggestion,
>
as already replied in my previous email, again here is my approach
a) I'll send patch 2-6, just leave out patch 7 for now, and as patch 1
is already accepted.. this way it won't break gxbb/gxl (the OLD SoC)
b) will pin you to require DT patch merged or re-send if necessary (as
till now the clkao driver is merged)
c) send out the patch 7 for UART AO clock fix
this is exactly what Jerome suggested..
Thank you
Yixun
^ permalink raw reply [flat|nested] 68+ messages in thread
* [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver
@ 2018-04-28 1:50 ` Yixun Lan
0 siblings, 0 replies; 68+ messages in thread
From: Yixun Lan @ 2018-04-28 1:50 UTC (permalink / raw)
To: linus-amlogic
Hi Kevin
On 04/28/18 02:49, Kevin Hilman wrote:
> Hi Yixun,
>
> Yixun Lan <yixun.lan@amlogic.com> writes:
>
>> On 04/27/2018 05:59 PM, Jerome Brunet wrote:
>
> [...]
>
>>>
>>> Looks to be the problem indeed. But it is still an issue with how your patchset
>>> in organized.
>>>
>>> I can't merge this until Kevin merges the patch above, which he can't merge
>>> until there is the clkc_ao support in axg, which is given by this series.
>>>
>>> 1# You should remove the axg part of the patch above. Kevin will be able to
>>> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
>>> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
>>> does not exist at this stage)
>>> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
>>> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
>>> changes the uart clocks at the same time.
>>>
>>
>> I didn't make myself clear in previous email
>>
>> I mean, could you merge patch 1-6, just exclude the patch 7
>> then kevin can merge the DT part (there are three patches) [1]
>> after the DT patches merged, then you can take this patch 7
>> This way, it won't break gxl or any other SoCs
>>
>> I'm sending patch 7 along with this series, it would be better if I
>> give a warning about it.
>
> Your proposal requires extra work from a couple different maintainers to
> track all the dependencies, and is very error prone. Sometimes
> maintainers may do this for you if they have time and are feeling
> generous, but you will have much more success if you can ease the
> process.
>
Indeed
I've actually put a note in the cover letter to highlight special
attention needed for patch 7, but turns out rely on maintainers to
handle the dependencies isn't a wise idea
Lesson has been learned here, and I'll handle dependencies myself next
time.
> Jerome has provided lots of guidance throughout this series and just
> above has provided you with a very good proposal above which minimizes
> the dependencies, and provides the changes in the right order.
>
> Please follow Jerome's suggestion,
>
as already replied in my previous email, again here is my approach
a) I'll send patch 2-6, just leave out patch 7 for now, and as patch 1
is already accepted.. this way it won't break gxbb/gxl (the OLD SoC)
b) will pin you to require DT patch merged or re-send if necessary (as
till now the clkao driver is merged)
c) send out the patch 7 for UART AO clock fix
this is exactly what Jerome suggested..
Thank you
Yixun
^ permalink raw reply [flat|nested] 68+ messages in thread
end of thread, other threads:[~2018-04-28 1:50 UTC | newest]
Thread overview: 68+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-26 8:44 [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` [PATCH v7 1/7] clk: meson: migrate to devm_of_clk_add_hw_provider API Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-27 10:00 ` Jerome Brunet
2018-04-27 10:00 ` Jerome Brunet
2018-04-27 10:00 ` Jerome Brunet
2018-04-27 10:00 ` Jerome Brunet
2018-04-26 8:44 ` [PATCH v7 2/7] clk: meson: aoclk: refactor common code into dedicated file Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` [PATCH v7 3/7] dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` [PATCH v7 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:59 ` Philipp Zabel
2018-04-26 8:59 ` Philipp Zabel
2018-04-26 8:59 ` Philipp Zabel
2018-04-26 8:59 ` Philipp Zabel
2018-04-26 9:05 ` Yixun Lan
2018-04-26 9:05 ` Yixun Lan
2018-04-26 9:05 ` Yixun Lan
2018-04-26 9:05 ` Yixun Lan
2018-04-26 8:44 ` [PATCH v7 5/7] clk: meson-axg: Add AO Clock and Reset controller driver Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:59 ` Philipp Zabel
2018-04-26 8:59 ` Philipp Zabel
2018-04-26 8:59 ` Philipp Zabel
2018-04-26 8:59 ` Philipp Zabel
2018-04-26 8:44 ` [PATCH v7 6/7] clk: meson: drop CLK_SET_RATE_PARENT flag Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-26 8:44 ` Yixun Lan
2018-04-27 9:20 ` [PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver Jerome Brunet
2018-04-27 9:20 ` Jerome Brunet
2018-04-27 9:20 ` Jerome Brunet
2018-04-27 9:20 ` Jerome Brunet
2018-04-27 9:31 ` Yixun Lan
2018-04-27 9:31 ` Yixun Lan
2018-04-27 9:31 ` Yixun Lan
2018-04-27 9:31 ` Yixun Lan
2018-04-27 9:59 ` Jerome Brunet
2018-04-27 9:59 ` Jerome Brunet
2018-04-27 9:59 ` Jerome Brunet
2018-04-27 9:59 ` Jerome Brunet
2018-04-27 12:33 ` Yixun Lan
2018-04-27 12:33 ` Yixun Lan
2018-04-27 12:33 ` Yixun Lan
2018-04-27 12:33 ` Yixun Lan
2018-04-27 18:49 ` Kevin Hilman
2018-04-27 18:49 ` Kevin Hilman
2018-04-27 18:49 ` Kevin Hilman
2018-04-27 18:49 ` Kevin Hilman
2018-04-27 18:49 ` Kevin Hilman
2018-04-28 1:50 ` Yixun Lan
2018-04-28 1:50 ` Yixun Lan
2018-04-28 1:50 ` Yixun Lan
2018-04-28 1:50 ` Yixun Lan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.