yocto jethro failed on gettext-native

yocto jethro failed on gettext-native

[Oliver Graute]

Hello list,

I try to compile yocto jethro environment which is working
on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.

The compilations stops on gettext-native.

bitbake -k fsl-image-mfgtool-initramfs
 
 make[5]: Entering directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'
| ../x86_64-linux-libtool  --tag=CC   --mode=link gcc   -isystem/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe -release 0.19.4 ../gnulib-lib/libgettextlib.la  -lc -no-undefined  -L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -o libgettextsrc.la -rpath /home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib libgettextsrc_la-message.lo libgettextsrc_la-po-error.lo libgettextsrc_la-po-xerror.lo libgettextsrc_la-read-catalog-abstract.lo libgettextsrc_la-po-lex.lo libgettextsrc_la-po-gram-gen.lo libgettextsrc_la-po-charset.lo libgettextsrc_la-read-po.lo libgettextsrc_la-read-properties.lo libgettextsrc_la-read-stringtable.lo libgettextsrc_la-open-catalog.lo libgettextsrc_la-dir-list.lo libgettextsrc_la-str-list.lo libgettextsrc_la-read-catalog.lo libgettextsrc_la-color.lo libgettextsrc_la-write-catalog.lo libgettextsrc_la-write-properties.lo libgettextsrc_la-write-stringtable.lo libgettextsrc_la-write-po.lo libgettextsrc_la-msgl-ascii.lo libgettextsrc_la-msgl-iconv.lo libgettextsrc_la-msgl-equal.lo libgettextsrc_la-msgl-cat.lo libgettextsrc_la-msgl-header.lo libgettextsrc_la-msgl-english.lo libgettextsrc_la-msgl-check.lo libgettextsrc_la-file-list.lo libgettextsrc_la-msgl-charset.lo libgettextsrc_la-po-time.lo libgettextsrc_la-plural-exp.lo libgettextsrc_la-plural-eval.lo libgettextsrc_la-plural-table.lo libgettextsrc_la-format.lo libgettextsrc_la-format-c.lo libgettextsrc_la-format-sh.lo libgettextsrc_la-format-python.lo libgettextsrc_la-format-python-brace.lo libgettextsrc_la-format-lisp.lo libgettextsrc_la-format-elisp.lo libgettextsrc_la-format-librep.lo libgettextsrc_la-format-scheme.lo libgettextsrc_la-format-java.lo libgettextsrc_la-format-csharp.lo libgettextsrc_la-format-awk.lo libgettextsrc_la-format-pascal.lo libgettextsrc_la-format-ycp.lo libgettextsrc_la-format-tcl.lo libgettextsrc_la-format-perl.lo libgettextsrc_la-format-perl-brace.lo libgettextsrc_la-format-php.lo libgettextsrc_la-format-gcc-internal.lo libgettextsrc_la-format-gfc-internal.lo libgettextsrc_la-format-qt.lo libgettextsrc_la-format-qt-plural.lo libgettextsrc_la-format-kde.lo libgettextsrc_la-format-boost.lo libgettextsrc_la-format-lua.lo libgettextsrc_la-format-javascript.lo libgettextsrc_la-read-desktop.lo
| x86_64-linux-libtool:   error: 'libgettextsrc_la-message.lo' is not a valid libtool object
| Makefile:2285: recipe for target 'libgettextsrc.la' failed
| make[5]: *** [libgettextsrc.la] Error 1
| make[5]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'
| Makefile:2206: recipe for target 'all' failed
| make[4]: *** [all] Error 2
| make[4]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'
| Makefile:1698: recipe for target 'all-recursive' failed
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
| Makefile:1564: recipe for target 'all' failed
| make[2]: *** [all] Error 2
| make[2]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
| Makefile:380: recipe for target 'all-recursive' failed
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build'
| Makefile:336: recipe for target 'all' failed
| make: *** [all] Error 2
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (log file is located at /home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/temp/log.do_compile.5336)
ERROR: Task 531 (virtual:native:/home/us/build/os-poky/meta/recipes-core/gettext/gettext_0.19.4.bb, do_compile) failed with exit code '1'


I already tried to reinstall libtool but without success.

Some ideas whats the cause for this error?

Best regards,

Oliver

Re: yocto jethro failed on gettext-native

[Zoran Stojsavljevic]

[-- Attachment #1: Type: text/plain, Size: 5546 bytes --]

> I try to compile yocto jethro environment which is working
> on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .

What would be the benefit for the successful compiling of YOCTO Jethro on
Kubuntu 16.04 over Ubuntu 14.04???

Zoran
_______

On Wed, Apr 25, 2018 at 5:03 PM, Oliver Graute <oliver.graute@gmail.com>
wrote:

> Hello list,
>
> I try to compile yocto jethro environment which is working
> on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.
>
> The compilations stops on gettext-native.
>
> bitbake -k fsl-image-mfgtool-initramfs
>
>  make[5]: Entering directory '/home/us/build-imx6ulevk-
> mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/
> build/gettext-tools/src'
> | ../x86_64-linux-libtool  --tag=CC   --mode=link gcc
>  -isystem/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/include
> -O2 -pipe -release 0.19.4 ../gnulib-lib/libgettextlib.la  -lc
> -no-undefined  -L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib
> -L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib
> -Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib
> -Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib
> -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib
> -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib
> -Wl,-O1 -o libgettextsrc.la -rpath /home/us/build-imx6ulevk-
> mfgtool/tmp/sysroots/x86_64-linux/usr/lib libgettextsrc_la-message.lo
> libgettextsrc_la-po-error.lo libgettextsrc_la-po-xerror.lo
> libgettextsrc_la-read-catalog-abstract.lo libgettextsrc_la-po-lex.lo
> libgettextsrc_la-po-gram-gen.lo libgettextsrc_la-po-charset.lo libgettex
>  tsrc_la-read-po.lo libgettextsrc_la-read-properties.lo
> libgettextsrc_la-read-stringtable.lo libgettextsrc_la-open-catalog.lo
> libgettextsrc_la-dir-list.lo libgettextsrc_la-str-list.lo
> libgettextsrc_la-read-catalog.lo libgettextsrc_la-color.lo
> libgettextsrc_la-write-catalog.lo libgettextsrc_la-write-properties.lo
> libgettextsrc_la-write-stringtable.lo libgettextsrc_la-write-po.lo
> libgettextsrc_la-msgl-ascii.lo libgettextsrc_la-msgl-iconv.lo
> libgettextsrc_la-msgl-equal.lo libgettextsrc_la-msgl-cat.lo
> libgettextsrc_la-msgl-header.lo libgettextsrc_la-msgl-english.lo
> libgettextsrc_la-msgl-check.lo libgettextsrc_la-file-list.lo
> libgettextsrc_la-msgl-charset.lo libgettextsrc_la-po-time.lo
> libgettextsrc_la-plural-exp.lo libgettextsrc_la-plural-eval.lo
> libgettextsrc_la-plural-table.lo libgettextsrc_la-format.lo
> libgettextsrc_la-format-c.lo libgettextsrc_la-format-sh.lo
> libgettextsrc_la-format-python.lo libgettextsrc_la-format-python-brace.lo
> libgettextsrc_la-format-lisp.lo libgettextsr
>  c_la-format-elisp.lo libgettextsrc_la-format-librep.lo
> libgettextsrc_la-format-scheme.lo libgettextsrc_la-format-java.lo
> libgettextsrc_la-format-csharp.lo libgettextsrc_la-format-awk.lo
> libgettextsrc_la-format-pascal.lo libgettextsrc_la-format-ycp.lo
> libgettextsrc_la-format-tcl.lo libgettextsrc_la-format-perl.lo
> libgettextsrc_la-format-perl-brace.lo libgettextsrc_la-format-php.lo
> libgettextsrc_la-format-gcc-internal.lo libgettextsrc_la-format-gfc-internal.lo
> libgettextsrc_la-format-qt.lo libgettextsrc_la-format-qt-plural.lo
> libgettextsrc_la-format-kde.lo libgettextsrc_la-format-boost.lo
> libgettextsrc_la-format-lua.lo libgettextsrc_la-format-javascript.lo
> libgettextsrc_la-read-desktop.lo
> | x86_64-linux-libtool:   error: 'libgettextsrc_la-message.lo' is not a
> valid libtool object
> | Makefile:2285: recipe for target 'libgettextsrc.la' failed
> | make[5]: *** [libgettextsrc.la] Error 1
> | make[5]: Leaving directory '/home/us/build-imx6ulevk-
> mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/
> build/gettext-tools/src'
> | Makefile:2206: recipe for target 'all' failed
> | make[4]: *** [all] Error 2
> | make[4]: Leaving directory '/home/us/build-imx6ulevk-
> mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/
> build/gettext-tools/src'
> | Makefile:1698: recipe for target 'all-recursive' failed
> | make[3]: *** [all-recursive] Error 1
> | make[3]: Leaving directory '/home/us/build-imx6ulevk-
> mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/
> build/gettext-tools'
> | Makefile:1564: recipe for target 'all' failed
> | make[2]: *** [all] Error 2
> | make[2]: Leaving directory '/home/us/build-imx6ulevk-
> mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/
> build/gettext-tools'
> | Makefile:380: recipe for target 'all-recursive' failed
> | make[1]: *** [all-recursive] Error 1
> | make[1]: Leaving directory '/home/us/build-imx6ulevk-
> mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build'
> | Makefile:336: recipe for target 'all' failed
> | make: *** [all] Error 2
> | ERROR: oe_runmake failed
> | ERROR: Function failed: do_compile (log file is located at
> /home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/
> gettext-native/0.19.4-r0/temp/log.do_compile.5336)
> ERROR: Task 531 (virtual:native:/home/us/build/os-poky/meta/recipes-
> core/gettext/gettext_0.19.4.bb, do_compile) failed with exit code '1'
>
>
> I already tried to reinstall libtool but without success.
>
> Some ideas whats the cause for this error?
>
> Best regards,
>
> Oliver
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>

[-- Attachment #2: Type: text/html, Size: 6852 bytes --]

Re: yocto jethro failed on gettext-native

[Zoran Stojsavljevic]

[-- Attachment #1: Type: text/plain, Size: 6838 bytes --]

> The benefit of the successful compiling of YOCTO Jethro on Kubuntu 16.04
over Ubuntu 14.04 would be the
> full understanding of the yocto system and its interaction with the host
system.

I do buy this argument just for the sole/only one use case: if you try to
become YOCTO distro developer by yourself! ;-)

Zoran
_______

On Wed, Apr 25, 2018 at 8:13 PM, Jean-Pierre Sainfeld <jean-pierre@anki.com>
wrote:

> The benefit of the successful compiling of YOCTO Jethro on Kubuntu 16.04
> over Ubuntu 14.04 would be the
> full understanding of the yocto system and its interaction with the host
> system.
> Yocto is a fantastic tool albeit a large piece of knowledge to swallow :-)
>
> JP Sainfeld
>
> On Wed, Apr 25, 2018 at 10:49 AM, Zoran Stojsavljevic <
> zoran.stojsavljevic@gmail.com> wrote:
>
>> > I try to compile yocto jethro environment which is working
>> > on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .
>>
>> What would be the benefit for the successful compiling of YOCTO Jethro on
>> Kubuntu 16.04 over Ubuntu 14.04???
>>
>> Zoran
>> _______
>>
>> On Wed, Apr 25, 2018 at 5:03 PM, Oliver Graute <oliver.graute@gmail.com>
>> wrote:
>>
>>> Hello list,
>>>
>>> I try to compile yocto jethro environment which is working
>>> on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.
>>>
>>> The compilations stops on gettext-native.
>>>
>>> bitbake -k fsl-image-mfgtool-initramfs
>>>
>>>  make[5]: Entering directory '/home/us/build-imx6ulevk-mfgt
>>> ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/get
>>> text-tools/src'
>>> | ../x86_64-linux-libtool  --tag=CC   --mode=link gcc
>>>  -isystem/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/include
>>> -O2 -pipe -release 0.19.4 ../gnulib-lib/libgettextlib.la  -lc
>>> -no-undefined  -L/home/us/build-imx6ulevk-mfg
>>> tool/tmp/sysroots/x86_64-linux/usr/lib -L/home/us/build-imx6ulevk-mfg
>>> tool/tmp/sysroots/x86_64-linux/lib -Wl,-rpath-link,/home/us/build
>>> -imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib
>>> -Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib
>>> -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib
>>> -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib
>>> -Wl,-O1 -o libgettextsrc.la -rpath /home/us/build-imx6ulevk-mfgto
>>> ol/tmp/sysroots/x86_64-linux/usr/lib libgettextsrc_la-message.lo
>>> libgettextsrc_la-po-error.lo libgettextsrc_la-po-xerror.lo
>>> libgettextsrc_la-read-catalog-abstract.lo libgettextsrc_la-po-lex.lo
>>> libgettextsrc_la-po-gram-gen.lo libgettextsrc_la-po-charset.lo libgettex
>>>  tsrc_la-read-po.lo libgettextsrc_la-read-properties.lo
>>> libgettextsrc_la-read-stringtable.lo libgettextsrc_la-open-catalog.lo
>>> libgettextsrc_la-dir-list.lo libgettextsrc_la-str-list.lo
>>> libgettextsrc_la-read-catalog.lo libgettextsrc_la-color.lo
>>> libgettextsrc_la-write-catalog.lo libgettextsrc_la-write-properties.lo
>>> libgettextsrc_la-write-stringtable.lo libgettextsrc_la-write-po.lo
>>> libgettextsrc_la-msgl-ascii.lo libgettextsrc_la-msgl-iconv.lo
>>> libgettextsrc_la-msgl-equal.lo libgettextsrc_la-msgl-cat.lo
>>> libgettextsrc_la-msgl-header.lo libgettextsrc_la-msgl-english.lo
>>> libgettextsrc_la-msgl-check.lo libgettextsrc_la-file-list.lo
>>> libgettextsrc_la-msgl-charset.lo libgettextsrc_la-po-time.lo
>>> libgettextsrc_la-plural-exp.lo libgettextsrc_la-plural-eval.lo
>>> libgettextsrc_la-plural-table.lo libgettextsrc_la-format.lo
>>> libgettextsrc_la-format-c.lo libgettextsrc_la-format-sh.lo
>>> libgettextsrc_la-format-python.lo libgettextsrc_la-format-python-brace.lo
>>> libgettextsrc_la-format-lisp.lo libgettextsr
>>>  c_la-format-elisp.lo libgettextsrc_la-format-librep.lo
>>> libgettextsrc_la-format-scheme.lo libgettextsrc_la-format-java.lo
>>> libgettextsrc_la-format-csharp.lo libgettextsrc_la-format-awk.lo
>>> libgettextsrc_la-format-pascal.lo libgettextsrc_la-format-ycp.lo
>>> libgettextsrc_la-format-tcl.lo libgettextsrc_la-format-perl.lo
>>> libgettextsrc_la-format-perl-brace.lo libgettextsrc_la-format-php.lo
>>> libgettextsrc_la-format-gcc-internal.lo libgettextsrc_la-format-gfc-internal.lo
>>> libgettextsrc_la-format-qt.lo libgettextsrc_la-format-qt-plural.lo
>>> libgettextsrc_la-format-kde.lo libgettextsrc_la-format-boost.lo
>>> libgettextsrc_la-format-lua.lo libgettextsrc_la-format-javascript.lo
>>> libgettextsrc_la-read-desktop.lo
>>> | x86_64-linux-libtool:   error: 'libgettextsrc_la-message.lo' is not a
>>> valid libtool object
>>> | Makefile:2285: recipe for target 'libgettextsrc.la' failed
>>> | make[5]: *** [libgettextsrc.la] Error 1
>>> | make[5]: Leaving directory '/home/us/build-imx6ulevk-mfgt
>>> ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/get
>>> text-tools/src'
>>> | Makefile:2206: recipe for target 'all' failed
>>> | make[4]: *** [all] Error 2
>>> | make[4]: Leaving directory '/home/us/build-imx6ulevk-mfgt
>>> ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/get
>>> text-tools/src'
>>> | Makefile:1698: recipe for target 'all-recursive' failed
>>> | make[3]: *** [all-recursive] Error 1
>>> | make[3]: Leaving directory '/home/us/build-imx6ulevk-mfgt
>>> ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
>>> | Makefile:1564: recipe for target 'all' failed
>>> | make[2]: *** [all] Error 2
>>> | make[2]: Leaving directory '/home/us/build-imx6ulevk-mfgt
>>> ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
>>> | Makefile:380: recipe for target 'all-recursive' failed
>>> | make[1]: *** [all-recursive] Error 1
>>> | make[1]: Leaving directory '/home/us/build-imx6ulevk-mfgt
>>> ool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build'
>>> | Makefile:336: recipe for target 'all' failed
>>> | make: *** [all] Error 2
>>> | ERROR: oe_runmake failed
>>> | ERROR: Function failed: do_compile (log file is located at
>>> /home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gette
>>> xt-native/0.19.4-r0/temp/log.do_compile.5336)
>>> ERROR: Task 531 (virtual:native:/home/us/build
>>> /os-poky/meta/recipes-core/gettext/gettext_0.19.4.bb, do_compile)
>>> failed with exit code '1'
>>>
>>>
>>> I already tried to reinstall libtool but without success.
>>>
>>> Some ideas whats the cause for this error?
>>>
>>> Best regards,
>>>
>>> Oliver
>>> --
>>> _______________________________________________
>>> yocto mailing list
>>> yocto@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>
>>
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
>>
>
>
> --
> Jean-Pierre Sainfeld
> 408-508-1741
>

[-- Attachment #2: Type: text/html, Size: 9118 bytes --]

Re: yocto jethro failed on gettext-native

[Oliver Graute]

On 25/04/18, Zoran Stojsavljevic wrote:
> > I try to compile yocto jethro environment which is working
> > on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .
> 
> What would be the benefit for the successful compiling of YOCTO Jethro on
> Kubuntu 16.04 over Ubuntu 14.04???

I tried to get my Yocto compiled on a PC of a colleague and his
installation was a Kubuntu 16.04. I've made the experience that often
only additional packages needs to be installed to step over these
compile issues. Sometimes its clear from the debug output but in this
case I have no Idea which packages is missing. On my develop PC and our
Buildserver with Ubuntu 14.04 everything is fine. But I'am afraid that I
can get similar trouble if I update to a newer ubuntu release there too.

Best regards,

Oliver

Re: yocto jethro failed on gettext-native

[Burton, Ross]

Jethro doesn't support Yocto 16.* because it is very old (released
2015, it's been unmaintained for six months now).  If you want to use
Jethro despite the known serious security problems then you'll need to
dig out the relevant fixes from the newer releases.

Ross

On 25 April 2018 at 20:36, Oliver Graute <oliver.graute@gmail.com> wrote:
> On 25/04/18, Zoran Stojsavljevic wrote:
>> > I try to compile yocto jethro environment which is working
>> > on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .
>>
>> What would be the benefit for the successful compiling of YOCTO Jethro on
>> Kubuntu 16.04 over Ubuntu 14.04???
>
> I tried to get my Yocto compiled on a PC of a colleague and his
> installation was a Kubuntu 16.04. I've made the experience that often
> only additional packages needs to be installed to step over these
> compile issues. Sometimes its clear from the debug output but in this
> case I have no Idea which packages is missing. On my develop PC and our
> Buildserver with Ubuntu 14.04 everything is fine. But I'am afraid that I
> can get similar trouble if I update to a newer ubuntu release there too.
>
> Best regards,
>
> Oliver
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Re: yocto jethro failed on gettext-native

[Randy MacLeod]

On 2018-04-25 03:50 PM, Burton, Ross wrote:
> Jethro doesn't support Yocto 16.* because it is very old (released
Err, Jethro doesn't support _Ubuntu_ 16.*
(Yocto 16.* is a ways off! :)  )
> 2015, it's been unmaintained for six months now).  If you want to use
> Jethro despite the known serious security problems then you'll need to
> dig out the relevant fixes from the newer releases.

Can you use a later release of Yocto such as 2.4 or 2.5
aka rocko/sumo?

If you need to use an older release there are companies, such
as Wind River [1], that can provide commercial support for 5+ years
after the Yocto release date. Send me an email off-list and
I'll help you contact our sales people! :)

../Randy

[1] 
https://www.yoctoproject.org/ecosystem/yocto-project-compatible-product-showcase/

This list is a bit out of date, we release WR Linux 10: LTS last fall.
It's based on YP-2.4/rocko


> 
> Ross
> 
> On 25 April 2018 at 20:36, Oliver Graute <oliver.graute@gmail.com> wrote:
>> On 25/04/18, Zoran Stojsavljevic wrote:
>>>> I try to compile yocto jethro environment which is working
>>>> on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .
>>>
>>> What would be the benefit for the successful compiling of YOCTO Jethro on
>>> Kubuntu 16.04 over Ubuntu 14.04???
>>
>> I tried to get my Yocto compiled on a PC of a colleague and his
>> installation was a Kubuntu 16.04. I've made the experience that often
>> only additional packages needs to be installed to step over these
>> compile issues. Sometimes its clear from the debug output but in this
>> case I have no Idea which packages is missing. On my develop PC and our
>> Buildserver with Ubuntu 14.04 everything is fine. But I'am afraid that I
>> can get similar trouble if I update to a newer ubuntu release there too.
>>
>> Best regards,
>>
>> Oliver
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto


-- 
# Randy MacLeod
# Wind River Linux

Re: yocto jethro failed on gettext-native

[Zoran Stojsavljevic]

> Jethro doesn't support Yocto 16.* because it is very old (released 2015...)...

Now, I must admit, I have learned something new. Never gave any
consideration to these releases: example: Pyro 17.0.3.

But now I understand: it has direct link with Ubuntu 17... Even, YOCTO
Pyro, as given example, can be substituted with Ubuntu 17.04?! Wow...

Every day in every way, I'm progressing more and more! ;-)

> If you want to use Jethro despite the known serious security problems
> then you'll need to dig out the relevant fixes from the newer releases.

My question here is: how hard it is? Either to move/rebase complex
application and some system packages to Rocko (and rebase/revisit
APIs), either to back-port additional (security) packages from the
newer releases?!

Seems lot of hard work, considering both cases.

Zoran

On Wed, Apr 25, 2018 at 9:50 PM, Burton, Ross <ross.burton@intel.com> wrote:
> Jethro doesn't support Yocto 16.* because it is very old (released
> 2015, it's been unmaintained for six months now).  If you want to use
> Jethro despite the known serious security problems then you'll need to
> dig out the relevant fixes from the newer releases.
>
> Ross
>
> On 25 April 2018 at 20:36, Oliver Graute <oliver.graute@gmail.com> wrote:
>> On 25/04/18, Zoran Stojsavljevic wrote:
>>> > I try to compile yocto jethro environment which is working
>>> > on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .
>>>
>>> What would be the benefit for the successful compiling of YOCTO Jethro on
>>> Kubuntu 16.04 over Ubuntu 14.04???
>>
>> I tried to get my Yocto compiled on a PC of a colleague and his
>> installation was a Kubuntu 16.04. I've made the experience that often
>> only additional packages needs to be installed to step over these
>> compile issues. Sometimes its clear from the debug output but in this
>> case I have no Idea which packages is missing. On my develop PC and our
>> Buildserver with Ubuntu 14.04 everything is fine. But I'am afraid that I
>> can get similar trouble if I update to a newer ubuntu release there too.
>>
>> Best regards,
>>
>> Oliver
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto

Re: yocto jethro failed on gettext-native

[Zoran Stojsavljevic]

Oliver,

Sorry for stealing your show... Did not want to. :-(

Floor all yours.

Zoran
_______

On Wed, Apr 25, 2018 at 10:55 PM, Zoran Stojsavljevic
<zoran.stojsavljevic@gmail.com> wrote:
>> Jethro doesn't support Yocto 16.* because it is very old (released 2015...)...
>
> Now, I must admit, I have learned something new. Never gave any
> consideration to these releases: example: Pyro 17.0.3.
>
> But now I understand: it has direct link with Ubuntu 17... Even, YOCTO
> Pyro, as given example, can be substituted with Ubuntu 17.04?! Wow...
>
> Every day in every way, I'm progressing more and more! ;-)
>
>> If you want to use Jethro despite the known serious security problems
>> then you'll need to dig out the relevant fixes from the newer releases.
>
> My question here is: how hard it is? Either to move/rebase complex
> application and some system packages to Rocko (and rebase/revisit
> APIs), either to back-port additional (security) packages from the
> newer releases?!
>
> Seems lot of hard work, considering both cases.
>
> Zoran
>
> On Wed, Apr 25, 2018 at 9:50 PM, Burton, Ross <ross.burton@intel.com> wrote:
>> Jethro doesn't support Yocto 16.* because it is very old (released
>> 2015, it's been unmaintained for six months now).  If you want to use
>> Jethro despite the known serious security problems then you'll need to
>> dig out the relevant fixes from the newer releases.
>>
>> Ross
>>
>> On 25 April 2018 at 20:36, Oliver Graute <oliver.graute@gmail.com> wrote:
>>> On 25/04/18, Zoran Stojsavljevic wrote:
>>>> > I try to compile yocto jethro environment which is working
>>>> > on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04 .
>>>>
>>>> What would be the benefit for the successful compiling of YOCTO Jethro on
>>>> Kubuntu 16.04 over Ubuntu 14.04???
>>>
>>> I tried to get my Yocto compiled on a PC of a colleague and his
>>> installation was a Kubuntu 16.04. I've made the experience that often
>>> only additional packages needs to be installed to step over these
>>> compile issues. Sometimes its clear from the debug output but in this
>>> case I have no Idea which packages is missing. On my develop PC and our
>>> Buildserver with Ubuntu 14.04 everything is fine. But I'am afraid that I
>>> can get similar trouble if I update to a newer ubuntu release there too.
>>>
>>> Best regards,
>>>
>>> Oliver
>>> --
>>> _______________________________________________
>>> yocto mailing list
>>> yocto@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto

Re: yocto jethro failed on gettext-native

[Andre McCurdy]

On Wed, Apr 25, 2018 at 8:03 AM, Oliver Graute <oliver.graute@gmail.com> wrote:
> Hello list,
>
> I try to compile yocto jethro environment which is working
> on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.
>
> The compilations stops on gettext-native.
>
> bitbake -k fsl-image-mfgtool-initramfs
>
>  make[5]: Entering directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'
> | ../x86_64-linux-libtool  --tag=CC   --mode=link gcc   -isystem/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe -release 0.19.4 ../gnulib-lib/libgettextlib.la  -lc -no-undefined  -L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -L/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath,/home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -o libgettextsrc.la -rpath /home/us/build-imx6ulevk-mfgtool/tmp/sysroots/x86_64-linux/usr/lib libgettextsrc_la-message.lo libgettextsrc_la-po-error.lo libgettextsrc_la-po-xerror.lo libgettextsrc_la-read-catalog-abstract.lo libgettextsrc_la-po-lex.lo libgettextsrc_la-po-gram-gen.lo libgettextsrc_la-po-charset.lo libgettex
>  tsrc_la-read-po.lo libgettextsrc_la-read-properties.lo libgettextsrc_la-read-stringtable.lo libgettextsrc_la-open-catalog.lo libgettextsrc_la-dir-list.lo libgettextsrc_la-str-list.lo libgettextsrc_la-read-catalog.lo libgettextsrc_la-color.lo libgettextsrc_la-write-catalog.lo libgettextsrc_la-write-properties.lo libgettextsrc_la-write-stringtable.lo libgettextsrc_la-write-po.lo libgettextsrc_la-msgl-ascii.lo libgettextsrc_la-msgl-iconv.lo libgettextsrc_la-msgl-equal.lo libgettextsrc_la-msgl-cat.lo libgettextsrc_la-msgl-header.lo libgettextsrc_la-msgl-english.lo libgettextsrc_la-msgl-check.lo libgettextsrc_la-file-list.lo libgettextsrc_la-msgl-charset.lo libgettextsrc_la-po-time.lo libgettextsrc_la-plural-exp.lo libgettextsrc_la-plural-eval.lo libgettextsrc_la-plural-table.lo libgettextsrc_la-format.lo libgettextsrc_la-format-c.lo libgettextsrc_la-format-sh.lo libgettextsrc_la-format-python.lo libgettextsrc_la-format-python-brace.lo libgettextsrc_la-format-lisp.lo libgettextsr
>  c_la-format-elisp.lo libgettextsrc_la-format-librep.lo libgettextsrc_la-format-scheme.lo libgettextsrc_la-format-java.lo libgettextsrc_la-format-csharp.lo libgettextsrc_la-format-awk.lo libgettextsrc_la-format-pascal.lo libgettextsrc_la-format-ycp.lo libgettextsrc_la-format-tcl.lo libgettextsrc_la-format-perl.lo libgettextsrc_la-format-perl-brace.lo libgettextsrc_la-format-php.lo libgettextsrc_la-format-gcc-internal.lo libgettextsrc_la-format-gfc-internal.lo libgettextsrc_la-format-qt.lo libgettextsrc_la-format-qt-plural.lo libgettextsrc_la-format-kde.lo libgettextsrc_la-format-boost.lo libgettextsrc_la-format-lua.lo libgettextsrc_la-format-javascript.lo libgettextsrc_la-read-desktop.lo
> | x86_64-linux-libtool:   error: 'libgettextsrc_la-message.lo' is not a valid libtool object

libgettextsrc_la-message.lo should be a short text file. Could you
find it in your build tree and post a copy?

> | Makefile:2285: recipe for target 'libgettextsrc.la' failed
> | make[5]: *** [libgettextsrc.la] Error 1
> | make[5]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'
> | Makefile:2206: recipe for target 'all' failed
> | make[4]: *** [all] Error 2
> | make[4]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools/src'
> | Makefile:1698: recipe for target 'all-recursive' failed
> | make[3]: *** [all-recursive] Error 1
> | make[3]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
> | Makefile:1564: recipe for target 'all' failed
> | make[2]: *** [all] Error 2
> | make[2]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build/gettext-tools'
> | Makefile:380: recipe for target 'all-recursive' failed
> | make[1]: *** [all-recursive] Error 1
> | make[1]: Leaving directory '/home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/build'
> | Makefile:336: recipe for target 'all' failed
> | make: *** [all] Error 2
> | ERROR: oe_runmake failed
> | ERROR: Function failed: do_compile (log file is located at /home/us/build-imx6ulevk-mfgtool/tmp/work/x86_64-linux/gettext-native/0.19.4-r0/temp/log.do_compile.5336)
> ERROR: Task 531 (virtual:native:/home/us/build/os-poky/meta/recipes-core/gettext/gettext_0.19.4.bb, do_compile) failed with exit code '1'
>
>
> I already tried to reinstall libtool but without success.
>
> Some ideas whats the cause for this error?

At a guess, something a little unusual with the setup of your Kubuntu
system. Combining Ubuntu 16.04 with OE 2.0 isn't so out of the
ordinary and others would certainly have hit the problem before now if
it was always seen.

Did you install all the standard host dependencies?

  https://www.yoctoproject.org/docs/2.0/yocto-project-qs/yocto-project-qs.html#packages

Did you manually upgrade or downgrade any of these host tools? Or is
the Kubuntu system a fairly clean generic installation?

Re: yocto jethro failed on gettext-native

[Oliver Graute]

On 25/04/18, Andre McCurdy wrote:
> On Wed, Apr 25, 2018 at 8:03 AM, Oliver Graute <oliver.graute@gmail.com> wrote:
> > Hello list,
> >
> > I try to compile yocto jethro environment which is working
> > on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.
> >
> > The compilations stops on gettext-native.
> >
> > bitbake -k fsl-image-mfgtool-initramfs
> >
> > | x86_64-linux-libtool:   error: 'libgettextsrc_la-message.lo' is not a valid libtool object
> 
> libgettextsrc_la-message.lo should be a short text file. Could you
> find it in your build tree and post a copy?
> 

the file was a zero byte file. All other *.lo files in that directory
was zero byte too. I assume because of a system crash I had before.

Just a bitbake -c cleansstate and rebuild of gettext-native didn't fixed that.

I deleted all the build-imx6ulevk folder and build everything from
scratch with only one thread, waited a few hours for compilation and now
its working ;)

> > Some ideas whats the cause for this error?
> 
> At a guess, something a little unusual with the setup of your Kubuntu
> system. Combining Ubuntu 16.04 with OE 2.0 isn't so out of the
> ordinary and others would certainly have hit the problem before now if
> it was always seen.
> 
> Did you install all the standard host dependencies?
> 
>   https://www.yoctoproject.org/docs/2.0/yocto-project-qs/yocto-project-qs.html#packages
> 

yes but thanks for the link as reference.

Best regards,

Oliver 

Re: yocto jethro failed on gettext-native

[Zoran Stojsavljevic]

> I deleted all the build-imx6ulevk folder and build everything from
> scratch with only one thread, waited a few hours for compilation and now
> its working ;)

Still, I am struggling to understand why??? What is the requirement
behind this ask?

As we see, it is much longer (one thread only) than on 14.04!?

Could you, please, do it on Ubuntu 17.04, or 17.10 (i bet, you
can't)??? And why, after all???

Zoran
_______

On Thu, Apr 26, 2018 at 5:53 PM, Oliver Graute <oliver.graute@gmail.com> wrote:
> On 25/04/18, Andre McCurdy wrote:
>> On Wed, Apr 25, 2018 at 8:03 AM, Oliver Graute <oliver.graute@gmail.com> wrote:
>> > Hello list,
>> >
>> > I try to compile yocto jethro environment which is working
>> > on a Ubuntu 14.04 installation. But not on a Kubuntu 16.04.
>> >
>> > The compilations stops on gettext-native.
>> >
>> > bitbake -k fsl-image-mfgtool-initramfs
>> >
>> > | x86_64-linux-libtool:   error: 'libgettextsrc_la-message.lo' is not a valid libtool object
>>
>> libgettextsrc_la-message.lo should be a short text file. Could you
>> find it in your build tree and post a copy?
>>
>
> the file was a zero byte file. All other *.lo files in that directory
> was zero byte too. I assume because of a system crash I had before.
>
> Just a bitbake -c cleansstate and rebuild of gettext-native didn't fixed that.
>
> I deleted all the build-imx6ulevk folder and build everything from
> scratch with only one thread, waited a few hours for compilation and now
> its working ;)
>
>> > Some ideas whats the cause for this error?
>>
>> At a guess, something a little unusual with the setup of your Kubuntu
>> system. Combining Ubuntu 16.04 with OE 2.0 isn't so out of the
>> ordinary and others would certainly have hit the problem before now if
>> it was always seen.
>>
>> Did you install all the standard host dependencies?
>>
>>   https://www.yoctoproject.org/docs/2.0/yocto-project-qs/yocto-project-qs.html#packages
>>
>
> yes but thanks for the link as reference.
>
> Best regards,
>
> Oliver
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Re: yocto jethro failed on gettext-native

[Oliver Graute]

On 26/04/18, Zoran Stojsavljevic wrote:
> > I deleted all the build-imx6ulevk folder and build everything from
> > scratch with only one thread, waited a few hours for compilation and now
> > its working ;)
> 
> Still, I am struggling to understand why??? What is the requirement
> behind this ask?

The requirement was just get our older yocto (jethro) build running on a
PC of a different developer. Often developers have their own flavor of
Ubuntu releases and they update to newer versions while they still
develop on yocto releases which is much older. Because that yocto
release is currently in the field by our costumer. Our product cycle is
not so fast to use the newest yocto releases. We started to develop when
jethro was up to date.

We compiled single threaded just because his PC is a bit unstable on
high load. And it crashed a few times on parallel makes. I know that
this is not ideal for yocto development.

> 
> As we see, it is much longer (one thread only) than on 14.04!?

its takes much longer then with settings

PARALLEL_MAKE = "-j 4"
BB_NUMBER_THREADS = "4"
 
> Could you, please, do it on Ubuntu 17.04, or 17.10 (i bet, you
> can't)??? And why, after all???

currently not im using only Ubuntu LTS Releases.
Perhaps I will try 18.04  LTS which released yesterday ;)

Best regards,

Oliver

Re: yocto jethro failed on gettext-native

[Zoran Stojsavljevic]

> Perhaps I will try 18.04  LTS which released yesterday ;)

This will be very interesting test. I bet it'll not work 100% (any of
use cases, with any number of threads). Native packages moved far
beyond Y2015, far beyond YOCTO Jethro release.

Zoran
_______

On Fri, Apr 27, 2018 at 8:19 AM, Oliver Graute <oliver.graute@gmail.com> wrote:
> On 26/04/18, Zoran Stojsavljevic wrote:
>> > I deleted all the build-imx6ulevk folder and build everything from
>> > scratch with only one thread, waited a few hours for compilation and now
>> > its working ;)
>>
>> Still, I am struggling to understand why??? What is the requirement
>> behind this ask?
>
> The requirement was just get our older yocto (jethro) build running on a
> PC of a different developer. Often developers have their own flavor of
> Ubuntu releases and they update to newer versions while they still
> develop on yocto releases which is much older. Because that yocto
> release is currently in the field by our costumer. Our product cycle is
> not so fast to use the newest yocto releases. We started to develop when
> jethro was up to date.
>
> We compiled single threaded just because his PC is a bit unstable on
> high load. And it crashed a few times on parallel makes. I know that
> this is not ideal for yocto development.
>
>>
>> As we see, it is much longer (one thread only) than on 14.04!?
>
> its takes much longer then with settings
>
> PARALLEL_MAKE = "-j 4"
> BB_NUMBER_THREADS = "4"
>
>> Could you, please, do it on Ubuntu 17.04, or 17.10 (i bet, you
>> can't)??? And why, after all???
>
> currently not im using only Ubuntu LTS Releases.
> Perhaps I will try 18.04  LTS which released yesterday ;)
>
> Best regards,
>
> Oliver
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Re: yocto jethro failed on gettext-native

[Philip Balister]

On 04/27/2018 02:19 AM, Oliver Graute wrote:
> On 26/04/18, Zoran Stojsavljevic wrote:
>>> I deleted all the build-imx6ulevk folder and build everything from
>>> scratch with only one thread, waited a few hours for compilation and now
>>> its working ;)
>>
>> Still, I am struggling to understand why??? What is the requirement
>> behind this ask?
> 
> The requirement was just get our older yocto (jethro) build running on a
> PC of a different developer. Often developers have their own flavor of
> Ubuntu releases and they update to newer versions while they still
> develop on yocto releases which is much older. Because that yocto
> release is currently in the field by our costumer. Our product cycle is
> not so fast to use the newest yocto releases. We started to develop when
> jethro was up to date.
> 
> We compiled single threaded just because his PC is a bit unstable on
> high load. And it crashed a few times on parallel makes. I know that
> this is not ideal for yocto development.

Take a look at BIOS settings. I had a board that was overclocking based
on CPU temperature, which failed miserably when you actually used all
the cores. Disable such settings.

Philip


> 
>>
>> As we see, it is much longer (one thread only) than on 14.04!?
> 
> its takes much longer then with settings
> 
> PARALLEL_MAKE = "-j 4"
> BB_NUMBER_THREADS = "4"
>  
>> Could you, please, do it on Ubuntu 17.04, or 17.10 (i bet, you
>> can't)??? And why, after all???
> 
> currently not im using only Ubuntu LTS Releases.
> Perhaps I will try 18.04  LTS which released yesterday ;)
> 
> Best regards,
> 
> Oliver
> 

Re: yocto jethro failed on gettext-native

[Zoran Stojsavljevic]

> Take a look at BIOS settings. I had a board that was overclocking based
> on CPU temperature, which failed miserably when you actually used all
> the cores. Disable such settings.

This has nothing to do with this particular problem. You simply, since
you over-clocked CPU, reached very quickly TDP1 (using all cores),
then reached beyond so-called TDP2 (since you did not setup CMOS
correctly), which initiated/triggered HW control called /PROCHOT... In
order to save CPU from physical damage, since you have reached very
close to Junction T.

Even if you did setup thresholds correctly, CPU probably went to
hold/blocked state for some limited time to throttle, in order to cool
down... Then these YOCTO failing effects might be visible, but I have
no idea how (most likely some overheated cores got thread of
execution/HyperThreads pipeline stale/lost)!?

My best guess, IMHO!

Zoran
_______

On Fri, Apr 27, 2018 at 2:04 PM, Philip Balister <philip@balister.org> wrote:
> On 04/27/2018 02:19 AM, Oliver Graute wrote:
>> On 26/04/18, Zoran Stojsavljevic wrote:
>>>> I deleted all the build-imx6ulevk folder and build everything from
>>>> scratch with only one thread, waited a few hours for compilation and now
>>>> its working ;)
>>>
>>> Still, I am struggling to understand why??? What is the requirement
>>> behind this ask?
>>
>> The requirement was just get our older yocto (jethro) build running on a
>> PC of a different developer. Often developers have their own flavor of
>> Ubuntu releases and they update to newer versions while they still
>> develop on yocto releases which is much older. Because that yocto
>> release is currently in the field by our costumer. Our product cycle is
>> not so fast to use the newest yocto releases. We started to develop when
>> jethro was up to date.
>>
>> We compiled single threaded just because his PC is a bit unstable on
>> high load. And it crashed a few times on parallel makes. I know that
>> this is not ideal for yocto development.
>
> Take a look at BIOS settings. I had a board that was overclocking based
> on CPU temperature, which failed miserably when you actually used all
> the cores. Disable such settings.
>
> Philip
>
>
>>
>>>
>>> As we see, it is much longer (one thread only) than on 14.04!?
>>
>> its takes much longer then with settings
>>
>> PARALLEL_MAKE = "-j 4"
>> BB_NUMBER_THREADS = "4"
>>
>>> Could you, please, do it on Ubuntu 17.04, or 17.10 (i bet, you
>>> can't)??? And why, after all???
>>
>> currently not im using only Ubuntu LTS Releases.
>> Perhaps I will try 18.04  LTS which released yesterday ;)
>>
>> Best regards,
>>
>> Oliver
>>
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Re: yocto jethro failed on gettext-native

[Paul Barker]

On Wed, 25 Apr 2018, at 21:55, Zoran Stojsavljevic wrote:
> > Jethro doesn't support Yocto 16.* because it is very old (released 2015...)...
> 
> Now, I must admit, I have learned something new. Never gave any
> consideration to these releases: example: Pyro 17.0.3.
> 
> But now I understand: it has direct link with Ubuntu 17... Even, YOCTO
> Pyro, as given example, can be substituted with Ubuntu 17.04?! Wow...
> 
> Every day in every way, I'm progressing more and more! ;-)
> 

You seem to be a bit confused here by the fact that the poky version number lined up with the year in 2017. See https://wiki.yoctoproject.org/wiki/Releases for some context.

-- 
Paul Barker
Beta Five Ltd

Re: yocto jethro failed on gettext-native

[Zoran Stojsavljevic]

[-- Attachment #1: Type: text/plain, Size: 1256 bytes --]

Hello Paul,

Could you, please, read couple of times more my quoted comment (by you)?
Stress to word: *couple*! ;-)

> Now, I must admit, I have learned something new. Never gave any
> consideration to these releases: example: Pyro 17.0.3.
>
>* But now I understand: it has direct link with Ubuntu 17... Even, YOCTO*
> *Pyro, as given example, can be substituted with Ubuntu 17.04?! Wow... *

Thank you,
Zoran
_______

On Wed, May 2, 2018 at 10:36 PM, Paul Barker <paul@betafive.co.uk> wrote:

> On Wed, 25 Apr 2018, at 21:55, Zoran Stojsavljevic wrote:
> > > Jethro doesn't support Yocto 16.* because it is very old (released
> 2015...)...
> >
> > Now, I must admit, I have learned something new. Never gave any
> > consideration to these releases: example: Pyro 17.0.3.
> >
> > But now I understand: it has direct link with Ubuntu 17... Even, YOCTO
> > Pyro, as given example, can be substituted with Ubuntu 17.04?! Wow...
> >
> > Every day in every way, I'm progressing more and more! ;-)
> >
>
> You seem to be a bit confused here by the fact that the poky version
> number lined up with the year in 2017. See https://wiki.yoctoproject.org/
> wiki/Releases for some context.
>
> --
> Paul Barker
> Beta Five Ltd
>

[-- Attachment #2: Type: text/html, Size: 6256 bytes --]