* [U-Boot] [PATCH v2 1/5] sunxi: Disable R_I2C for Libre Computer Board ALL-H3-CC H3 ver.
2018-04-28 5:35 [U-Boot] [PATCH v2 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants Chen-Yu Tsai
@ 2018-04-28 5:36 ` Chen-Yu Tsai
2018-04-28 5:36 ` [U-Boot] [PATCH v2 2/5] sunxi: Split out common board design for ALL-H3-CC device tree Chen-Yu Tsai
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Chen-Yu Tsai @ 2018-04-28 5:36 UTC (permalink / raw)
To: u-boot
The Libre Computer Board ALL-H3-CC does not have an I2C controllable
regulator. Having R_I2C and SPL_I2C enabled serves no purpose.
Disable them.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
configs/libretech_all_h3_cc_h3_defconfig | 2 --
1 file changed, 2 deletions(-)
diff --git a/configs/libretech_all_h3_cc_h3_defconfig b/configs/libretech_all_h3_cc_h3_defconfig
index 6072680e4711..185facdf3eab 100644
--- a/configs/libretech_all_h3_cc_h3_defconfig
+++ b/configs/libretech_all_h3_cc_h3_defconfig
@@ -5,10 +5,8 @@ CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
-CONFIG_R_I2C_ENABLE=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-libretech-all-h3-cc"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
--
2.17.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH v2 2/5] sunxi: Split out common board design for ALL-H3-CC device tree
2018-04-28 5:35 [U-Boot] [PATCH v2 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants Chen-Yu Tsai
2018-04-28 5:36 ` [U-Boot] [PATCH v2 1/5] sunxi: Disable R_I2C for Libre Computer Board ALL-H3-CC H3 ver Chen-Yu Tsai
@ 2018-04-28 5:36 ` Chen-Yu Tsai
2018-04-28 5:36 ` [U-Boot] [PATCH v2 3/5] sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver Chen-Yu Tsai
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Chen-Yu Tsai @ 2018-04-28 5:36 UTC (permalink / raw)
To: u-boot
The Libre Computer Project ALL-H3-CC has three models, all using the
same board design, but with different pin compatible SoCs and amount of
DRAM.
Currently only the H3 1GB DRAM variant is supported. To support the two
other variants, first split the original device tree into a common board
design part and an SoC specific part.
The SoC part only defines which SoC is used and model name, and includes
the SoC specific dtsi file and the common design dtsi file.
Also fix up the SPDX identifier line to use the correct comment style,
and place it on the first line.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts | 166 +-----------------
...-cc.dts => sunxi-libretech-all-h3-cc.dtsi} | 9 +-
2 files changed, 3 insertions(+), 172 deletions(-)
copy arch/arm/dts/{sun8i-h3-libretech-all-h3-cc.dts => sunxi-libretech-all-h3-cc.dtsi} (94%)
diff --git a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
index c8fd69f0a4b8..50f2fb30d2d4 100644
--- a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
@@ -1,175 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
#include "sun8i-h3.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sunxi-libretech-all-h3-cc.dtsi"
/ {
model = "Libre Computer Board ALL-H3-CC H3";
compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
-
- aliases {
- ethernet0 = &emac;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- pwr_led {
- label = "librecomputer:green:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
- default-state = "on";
- };
-
- status_led {
- label = "librecomputer:blue:status";
- gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- power {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
- };
- };
-
- reg_vcc1v2: vcc1v2 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v2";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <®_vcc5v0>;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
- enable-active-high;
- };
-
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <®_vcc5v0>;
- };
-
- /* This represents the board's 5V input */
- reg_vcc5v0: vcc5v0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_vcc_dram: vcc-dram {
- compatible = "regulator-fixed";
- regulator-name = "vcc-dram";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <®_vcc5v0>;
- gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
- enable-active-high;
- };
-
- reg_vcc_io: vcc-io {
- compatible = "regulator-fixed";
- regulator-name = "vcc-io";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <®_vcc3v3>;
- gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
- };
-
- reg_vdd_cpux: vdd-cpux {
- compatible = "regulator-fixed";
- regulator-name = "vdd-cpux";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <®_vcc5v0>;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
- enable-active-high;
- };
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&ehci3 {
- status = "okay";
-};
-
-&emac {
- phy-handle = <&int_mii_phy>;
- phy-mode = "mii";
- allwinner,leds-active-low;
- status = "okay";
-};
-
-&ir {
- pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
- vmmc-supply = <®_vcc_io>;
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
- cd-inverted;
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&ohci3 {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-};
-
-&usbphy {
- /* VBUS on USB ports are always on */
- usb0_vbus-supply = <®_vcc5v0>;
- usb1_vbus-supply = <®_vcc5v0>;
- usb2_vbus-supply = <®_vcc5v0>;
- usb3_vbus-supply = <®_vcc5v0>;
- status = "okay";
};
diff --git a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi
similarity index 94%
copy from arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
copy to arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi
index c8fd69f0a4b8..5d01bba180e4 100644
--- a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -1,19 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
-/dts-v1/;
-#include "sun8i-h3.dtsi"
-
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
- model = "Libre Computer Board ALL-H3-CC H3";
- compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
-
aliases {
ethernet0 = &emac;
serial0 = &uart0;
--
2.17.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH v2 3/5] sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver.
2018-04-28 5:35 [U-Boot] [PATCH v2 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants Chen-Yu Tsai
2018-04-28 5:36 ` [U-Boot] [PATCH v2 1/5] sunxi: Disable R_I2C for Libre Computer Board ALL-H3-CC H3 ver Chen-Yu Tsai
2018-04-28 5:36 ` [U-Boot] [PATCH v2 2/5] sunxi: Split out common board design for ALL-H3-CC device tree Chen-Yu Tsai
@ 2018-04-28 5:36 ` Chen-Yu Tsai
2018-04-28 5:36 ` [U-Boot] [PATCH v2 4/5] sunxi: Add Libre Computer Board ALL-H3-CC H5 ver Chen-Yu Tsai
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Chen-Yu Tsai @ 2018-04-28 5:36 UTC (permalink / raw)
To: u-boot
This patch adds a device tree file for the H2+ version of the Libre
Computer Board ALL-H3-CC. It is the same board first introduced in
commit afe27544125e ("sunxi: Add support for Libre Computer Board
ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H2+ SoC, and
has only two 2Gb DDR3 chips instead of four.
The device tree utilizes the common board design file for ALL-H3-CC,
providing just the model strings and SoC specifics.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts | 13 +++++++++++++
board/sunxi/MAINTAINERS | 3 ++-
...config => libretech_all_h3_cc_h2_plus_defconfig} | 2 +-
4 files changed, 17 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
copy configs/{orangepi_one_defconfig => libretech_all_h3_cc_h2_plus_defconfig} (85%)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ac7667b1e805..21e7bc1472aa 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -351,6 +351,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
sun8i-a83t-cubietruck-plus.dtb \
sun8i-a83t-tbs-a711.dts
dtb-$(CONFIG_MACH_SUN8I_H3) += \
+ sun8i-h2-plus-libretech-all-h3-cc.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-libretech-all-h3-cc.dtb \
diff --git a/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
new file mode 100644
index 000000000000..4db0d4bb65eb
--- /dev/null
+++ b/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+ model = "Libre Computer Board ALL-H3-CC H2+";
+ compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 6dd48c026516..4c21a2fedfe8 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -266,9 +266,10 @@ M: Siarhei Siamashka <siarhei.siamashka@gmail.com>
S: Maintained
F: configs/MSI_Primo81_defconfig
-LIBRETECH ALL-H3-CC H3 BOARD
+LIBRETECH ALL-H3-CC BOARDS
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
+F: configs/libretech_all_h3_cc_h2_plus_defconfig
F: configs/libretech_all_h3_cc_h3_defconfig
NANOPI-M1 BOARD
diff --git a/configs/orangepi_one_defconfig b/configs/libretech_all_h3_cc_h2_plus_defconfig
similarity index 85%
copy from configs/orangepi_one_defconfig
copy to configs/libretech_all_h3_cc_h2_plus_defconfig
index 23f4973e5bab..0cbcd48aadb8 100644
--- a/configs/orangepi_one_defconfig
+++ b/configs/libretech_all_h3_cc_h2_plus_defconfig
@@ -5,7 +5,7 @@ CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-one"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-libretech-all-h3-cc"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
--
2.17.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH v2 4/5] sunxi: Add Libre Computer Board ALL-H3-CC H5 ver.
2018-04-28 5:35 [U-Boot] [PATCH v2 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants Chen-Yu Tsai
` (2 preceding siblings ...)
2018-04-28 5:36 ` [U-Boot] [PATCH v2 3/5] sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver Chen-Yu Tsai
@ 2018-04-28 5:36 ` Chen-Yu Tsai
2018-04-28 5:36 ` [U-Boot] [PATCH v2 5/5] sunxi: Sort dts Makefile entries for H3 Chen-Yu Tsai
2018-05-01 4:48 ` [U-Boot] [PATCH v2 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants Jagan Teki
5 siblings, 0 replies; 7+ messages in thread
From: Chen-Yu Tsai @ 2018-04-28 5:36 UTC (permalink / raw)
To: u-boot
This patch adds a device tree file for the H5 version of the Libre
Computer Board ALL-H3-CC. It is the same board first introduced in
commit afe27544125e ("sunxi: Add support for Libre Computer Board
ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H5 SoC, and
has 4Gb DDR3 chips instead of 2Gb ones.
The device tree utilizes the common board design file for ALL-H3-CC,
providing just the model strings and SoC specifics.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/dts/Makefile | 1 +
...tech-all-h3-cc.dts => sun50i-h5-libretech-all-h3-cc.dts} | 6 +++---
board/sunxi/MAINTAINERS | 1 +
...ngepi_one_defconfig => libretech_all_h3_cc_h5_defconfig} | 4 ++--
4 files changed, 7 insertions(+), 5 deletions(-)
copy arch/arm/dts/{sun8i-h2-plus-libretech-all-h3-cc.dts => sun50i-h5-libretech-all-h3-cc.dts} (53%)
copy configs/{orangepi_one_defconfig => libretech_all_h3_cc_h5_defconfig} (80%)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 21e7bc1472aa..482ece6112f2 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -371,6 +371,7 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \
dtb-$(CONFIG_MACH_SUN8I_V3S) += \
sun8i-v3s-licheepi-zero.dtb
dtb-$(CONFIG_MACH_SUN50I_H5) += \
+ sun50i-h5-libretech-all-h3-cc.dtb \
sun50i-h5-nanopi-neo2.dtb \
sun50i-h5-nanopi-neo-plus2.dtb \
sun50i-h5-orangepi-pc2.dtb \
diff --git a/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
similarity index 53%
copy from arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
copy to arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
index 4db0d4bb65eb..a7e53c5c26b4 100644
--- a/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
+++ b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
@@ -4,10 +4,10 @@
*/
/dts-v1/;
-#include "sun8i-h3.dtsi"
+#include "sun50i-h5.dtsi"
#include "sunxi-libretech-all-h3-cc.dtsi"
/ {
- model = "Libre Computer Board ALL-H3-CC H2+";
- compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus";
+ model = "Libre Computer Board ALL-H3-CC H5";
+ compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5";
};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 4c21a2fedfe8..ba36a09f5027 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -271,6 +271,7 @@ M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/libretech_all_h3_cc_h2_plus_defconfig
F: configs/libretech_all_h3_cc_h3_defconfig
+F: configs/libretech_all_h3_cc_h5_defconfig
NANOPI-M1 BOARD
M: Mylène Josserand <mylene.josserand@free-electrons.com>
diff --git a/configs/orangepi_one_defconfig b/configs/libretech_all_h3_cc_h5_defconfig
similarity index 80%
copy from configs/orangepi_one_defconfig
copy to configs/libretech_all_h3_cc_h5_defconfig
index 23f4973e5bab..061bddc8fd5e 100644
--- a/configs/orangepi_one_defconfig
+++ b/configs/libretech_all_h3_cc_h5_defconfig
@@ -1,11 +1,11 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_SPL=y
-CONFIG_MACH_SUN8I_H3=y
+CONFIG_MACH_SUN50I_H5=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-one"
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h3-cc"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
--
2.17.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH v2 5/5] sunxi: Sort dts Makefile entries for H3
2018-04-28 5:35 [U-Boot] [PATCH v2 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants Chen-Yu Tsai
` (3 preceding siblings ...)
2018-04-28 5:36 ` [U-Boot] [PATCH v2 4/5] sunxi: Add Libre Computer Board ALL-H3-CC H5 ver Chen-Yu Tsai
@ 2018-04-28 5:36 ` Chen-Yu Tsai
2018-05-01 4:48 ` [U-Boot] [PATCH v2 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants Jagan Teki
5 siblings, 0 replies; 7+ messages in thread
From: Chen-Yu Tsai @ 2018-04-28 5:36 UTC (permalink / raw)
To: u-boot
The dts Makefile entries for the H3 are not ordered correctly.
Move the Nano Pi entries before the Orange Pi so they are.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/dts/Makefile | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 482ece6112f2..6745259a6357 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -355,17 +355,17 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-libretech-all-h3-cc.dtb \
+ sun8i-h3-nanopi-m1.dtb \
+ sun8i-h3-nanopi-m1-plus.dtb \
+ sun8i-h3-nanopi-neo.dtb \
+ sun8i-h3-nanopi-neo-air.dtb \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-lite.dtb \
sun8i-h3-orangepi-one.dtb \
sun8i-h3-orangepi-pc.dtb \
sun8i-h3-orangepi-pc-plus.dtb \
sun8i-h3-orangepi-plus.dtb \
- sun8i-h3-orangepi-plus2e.dtb \
- sun8i-h3-nanopi-m1.dtb \
- sun8i-h3-nanopi-m1-plus.dtb \
- sun8i-h3-nanopi-neo.dtb \
- sun8i-h3-nanopi-neo-air.dtb
+ sun8i-h3-orangepi-plus2e.dtb
dtb-$(CONFIG_MACH_SUN8I_R40) += \
sun8i-r40-bananapi-m2-ultra.dtb
dtb-$(CONFIG_MACH_SUN8I_V3S) += \
--
2.17.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH v2 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants
2018-04-28 5:35 [U-Boot] [PATCH v2 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants Chen-Yu Tsai
` (4 preceding siblings ...)
2018-04-28 5:36 ` [U-Boot] [PATCH v2 5/5] sunxi: Sort dts Makefile entries for H3 Chen-Yu Tsai
@ 2018-05-01 4:48 ` Jagan Teki
5 siblings, 0 replies; 7+ messages in thread
From: Jagan Teki @ 2018-05-01 4:48 UTC (permalink / raw)
To: u-boot
On Sat, Apr 28, 2018 at 11:05 AM, Chen-Yu Tsai <wens@csie.org> wrote:
> Hi,
>
> This is v2 of the ALL-H3-CC H2+/H5 variants series.
>
> Changes since v1:
>
> - Renamed common board .dtsi to follow what was merged in Linux
> - Fixed error in Makefile
> - Collected acks from Maxime
>
> Original cover letter:
>
>
> This series is adds support for the H2+ and H5 variants of the Libre
> Computer Project ALL-H3-CC board. The board uses the same board design
> with the H2+, H3, and H5 SoCs, with different memory capacities. The
> H3 version was supported in v2018.03.
>
> The Linux Kernel patch submissions for these two boards can be found
> here: https://lkml.org/lkml/2018/4/24/312
>
> The device tree changes are not synced from the kernel. Rather, the
> same changes are applied to U-boot's copy. First the ALL-H3-CC dts
> is split into a common board design dtsi, and a H3 specific dts.
> Then the H2+ and H5 versions are added, reusing the same dtsi file.
>
> Patch 1 disables R_I2C and SPL_I2C for the ALL-H3-CC. Turns out there
> is no use for it.
>
> Patch 2 splits the ALL-H3-CC dts file into a common board design dtsi,
> and a H3 specific dts.
>
> Patch 3 adds support for the H2+ variant of ALL-H3-CC.
>
> Patch 4 adds support for the H5 variant of ALL-H3-CC.
>
> Patch 5 is an unrelated cleanup patch for the dts Makefile. It might or
> might not conflict if sent separately, depending on how much diff context
> git uses, so I'm sending it together.
>
> Please have a look.
>
>
> Chen-Yu Tsai (5):
> sunxi: Disable R_I2C for Libre Computer Board ALL-H3-CC H3 ver.
> sunxi: Split out common board design for ALL-H3-CC device tree
> sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver.
> sunxi: Add Libre Computer Board ALL-H3-CC H5 ver.
> sunxi: Sort dts Makefile entries for H3
Reviewed-by: Jagan Teki <jagan@openedev.com>
Applied to u-boot-sunxi/master
^ permalink raw reply [flat|nested] 7+ messages in thread