From: Krzysztof Kozlowski <krzk@kernel.org> To: Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, arm@kernel.org, Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Subject: [PATCH fixes-for-current] arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433 Date: Sun, 6 May 2018 16:55:24 +0200 [thread overview] Message-ID: <20180506145524.14570-1-krzk@kernel.org> (raw) From: Marek Szyprowski <m.szyprowski@samsung.com> All interrupts from SoC internal modules are level triggered, so fix incorrect trigger type for I2S1 device on Exynos5433 SoCs. This fixes following kernel warning: WARNING: CPU: 2 PID: 1 at drivers/irqchip/irq-gic.c:1016 gic_irq_domain_translate+0xb0/0xb8 Modules linked in: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc7-next-20180329 #646 Hardware name: Samsung TM2 board (DT) pstate: 20000005 (nzCv daif -PAN -UAO) pc : gic_irq_domain_translate+0xb0/0xb8 lr : irq_create_fwspec_mapping+0x64/0x328 sp : ffff0000098b38d0 ... Call trace: gic_irq_domain_translate+0xb0/0xb8 irq_create_of_mapping+0x78/0xa0 of_irq_get+0x6c/0xa0 of_irq_to_resource+0x38/0x108 of_irq_to_resource_table+0x50/0x78 of_device_alloc+0x118/0x1b8 of_platform_device_create_pdata+0x54/0xe0 of_platform_bus_create+0x118/0x340 of_platform_bus_create+0x17c/0x340 of_platform_populate+0x74/0xd8 of_platform_default_populate_init+0xb0/0xcc do_one_initcall+0x50/0x158 kernel_init_freeable+0x184/0x22c kernel_init+0x10/0x108 ret_from_fork+0x10/0x18 ---[ end trace 6decb2b3078d73f0 ]--- Fixes: d8d579c316e8 ("ARM: dts: exynos: Add I2S1 device node to exynos5433") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Hi Arnd and Olof, That's one fix for current release cycle (issue introduced in merge window). Best regards, Krzysztof arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index c0231d077fa6..1ad8677f6a0a 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1317,7 +1317,7 @@ reg = <0x14d60000 0x100>; dmas = <&pdma0 31 &pdma0 30>; dma-names = "tx", "rx"; - interrupts = <GIC_SPI 435 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu_peric CLK_PCLK_I2S1>, <&cmu_peric CLK_PCLK_I2S1>, <&cmu_peric CLK_SCLK_I2S1>; -- 2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: krzk@kernel.org (Krzysztof Kozlowski) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH fixes-for-current] arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433 Date: Sun, 6 May 2018 16:55:24 +0200 [thread overview] Message-ID: <20180506145524.14570-1-krzk@kernel.org> (raw) From: Marek Szyprowski <m.szyprowski@samsung.com> All interrupts from SoC internal modules are level triggered, so fix incorrect trigger type for I2S1 device on Exynos5433 SoCs. This fixes following kernel warning: WARNING: CPU: 2 PID: 1 at drivers/irqchip/irq-gic.c:1016 gic_irq_domain_translate+0xb0/0xb8 Modules linked in: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc7-next-20180329 #646 Hardware name: Samsung TM2 board (DT) pstate: 20000005 (nzCv daif -PAN -UAO) pc : gic_irq_domain_translate+0xb0/0xb8 lr : irq_create_fwspec_mapping+0x64/0x328 sp : ffff0000098b38d0 ... Call trace: gic_irq_domain_translate+0xb0/0xb8 irq_create_of_mapping+0x78/0xa0 of_irq_get+0x6c/0xa0 of_irq_to_resource+0x38/0x108 of_irq_to_resource_table+0x50/0x78 of_device_alloc+0x118/0x1b8 of_platform_device_create_pdata+0x54/0xe0 of_platform_bus_create+0x118/0x340 of_platform_bus_create+0x17c/0x340 of_platform_populate+0x74/0xd8 of_platform_default_populate_init+0xb0/0xcc do_one_initcall+0x50/0x158 kernel_init_freeable+0x184/0x22c kernel_init+0x10/0x108 ret_from_fork+0x10/0x18 ---[ end trace 6decb2b3078d73f0 ]--- Fixes: d8d579c316e8 ("ARM: dts: exynos: Add I2S1 device node to exynos5433") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Hi Arnd and Olof, That's one fix for current release cycle (issue introduced in merge window). Best regards, Krzysztof arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index c0231d077fa6..1ad8677f6a0a 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1317,7 +1317,7 @@ reg = <0x14d60000 0x100>; dmas = <&pdma0 31 &pdma0 30>; dma-names = "tx", "rx"; - interrupts = <GIC_SPI 435 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu_peric CLK_PCLK_I2S1>, <&cmu_peric CLK_PCLK_I2S1>, <&cmu_peric CLK_SCLK_I2S1>; -- 2.14.1
next reply other threads:[~2018-05-06 14:56 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-06 14:55 Krzysztof Kozlowski [this message] 2018-05-06 14:55 ` [PATCH fixes-for-current] arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433 Krzysztof Kozlowski 2018-05-14 8:01 ` Olof Johansson 2018-05-14 8:01 ` Olof Johansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180506145524.14570-1-krzk@kernel.org \ --to=krzk@kernel.org \ --cc=arm@kernel.org \ --cc=arnd@arndb.de \ --cc=kgene@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=m.szyprowski@samsung.com \ --cc=olof@lixom.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.