[PATCH v3 0/5] devfreq: rk3399_dmc: improve rk3399_dmc driver and it's documentation

[PATCH v3 0/5] devfreq: rk3399_dmc: improve rk3399_dmc driver and it's documentation

[Enric Balletbo i Serra]

Dear all,

These patches is an attempt to improve a little bit the rk3399_dmc
driver and it's documentation in order to have all in a better shape for
a future work I am doing. My final intention is add ddrfreq support for
rockchip drm driver, but the patches for this are still
work-in-progress. So let's start with this first patchset that is
basically some fixes/improvements for the rk3399_dmc driver.

The patches apply on top of current 4.17-rc3.

Best regards,
 Enric

Changes in v3:
- [4/6] Move interrupts to be optional instead of remove.

Changes in v2:
- [1/6] Add Acked-by MyungJoo Ham.
- [2/6] Improved commit message.
- [2/6] Rename ddr.h to rk3399-ddr.h because is SoC specific.
- [3/6] Add Reviewed-by Chanwoo Choi
- [4/6] Add Reviewed-by Chanwoo Choi.
- [5/6] Add Acked-by MyungJoo Ham.
- [5/6] Add Reviewed-by Chanwoo Choi.
- [6/6] Removed this patch from this series.

Enric Balletbo i Serra (3):
  dt-bindings: clock: add rk3399 DDR3 standard speed bins.
  devfreq: rk3399_dmc: remove wait for dcf irq event.
  dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.

Lin Huang (1):
  devfreq: rk3399_dmc: do not print error when get supply and clk defer.

Nick Milner (1):
  dt-bindings: devfreq: rk3399_dmc: improve binding documentation.

 .../bindings/devfreq/rk3399_dmc.txt           | 213 +++++++++---------
 drivers/devfreq/rk3399_dmc.c                  |  59 +----
 include/dt-bindings/clock/rk3399-ddr.h        |  56 +++++
 3 files changed, 172 insertions(+), 156 deletions(-)
 create mode 100644 include/dt-bindings/clock/rk3399-ddr.h

-- 
2.17.0

[PATCH v3 1/5] dt-bindings: devfreq: rk3399_dmc: improve binding documentation.

[Enric Balletbo i Serra]

From: Nick Milner <nick.milner@collabora.com>

There are several typos, references to non existent files, grammar and
punctuation mistakes in the rk3399_dmc.txt binding. This patch tries
to improve the binding documentation and fix these mistakes.

Signed-off-by: Nick Milner <nick.milner@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
---

Changes in v3: None
Changes in v2:
- [1/6] Add Acked-by MyungJoo Ham.
- [6/6] Removed this patch from this series.

 .../bindings/devfreq/rk3399_dmc.txt           | 207 +++++++++---------
 1 file changed, 105 insertions(+), 102 deletions(-)

diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
index d6d2833482c9..d83ef821d282 100644
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -1,155 +1,158 @@
-* Rockchip rk3399 DMC(Dynamic Memory Controller) device
+* Rockchip rk3399 DMC (Dynamic Memory Controller) device
 
 Required properties:
 - compatible:		 Must be "rockchip,rk3399-dmc".
 - devfreq-events:	 Node to get DDR loading, Refer to
-			 Documentation/devicetree/bindings/devfreq/
+			 Documentation/devicetree/bindings/devfreq/event/
 			 rockchip-dfi.txt
-- interrupts:		 The interrupt number to the CPU. The interrupt
-			 specifier format depends on the interrupt controller.
-			 It should be DCF interrupts, when DDR dvfs finish,
-			 it will happen.
+- interrupts:		 The CPU interrupt number. The interrupt specifier
+			 format depends on the interrupt controller.
+			 It should be a DCF interrupt. When DDR DVFS finishes
+			 a DCF interrupt is triggered.
 - clocks:		 Phandles for clock specified in "clock-names" property
 - clock-names :		 The name of clock used by the DFI, must be
 			 "pclk_ddr_mon";
-- operating-points-v2:	 Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp.txt
 			 for details.
 - center-supply:	 DMC supply node.
 - status:		 Marks the node enabled/disabled.
 
-Following properties are ddr timing:
+Following properties relate to DDR timing:
 
 - rockchip,dram_speed_bin :	  Value reference include/dt-bindings/clock/ddr.h,
-				  it select ddr3 cl-trp-trcd type, default value
-				  "DDR3_DEFAULT".it must selected according to
-				  "Speed Bin" in ddr3 datasheet, DO NOT use
-				  smaller "Speed Bin" than ddr3 exactly is.
-
-- rockchip,pd_idle :		  Config the PD_IDLE value, defined the power-down
-				  idle period, memories are places into power-down
-				  mode if bus is idle for PD_IDLE DFI clocks.
-
-- rockchip,sr_idle :		  Configure the SR_IDLE value, defined the
-				  selfrefresh idle period, memories are places
-				  into self-refresh mode if bus is idle for
-				  SR_IDLE*1024 DFI clocks (DFI clocks freq is
-				  half of dram's clocks), defaule value is "0".
-
-- rockchip,sr_mc_gate_idle :	  Defined the self-refresh with memory and
-				  controller clock gating idle period, memories
-				  are places into self-refresh mode and memory
-				  controller clock arg gating if bus is idle for
-				  sr_mc_gate_idle*1024 DFI clocks.
-
-- rockchip,srpd_lite_idle :	  Defined the self-refresh power down idle
-				  period, memories are places into self-refresh
-				  power down mode if bus is idle for
-				  srpd_lite_idle*1024 DFI clocks. This parameter
-				  is for LPDDR4 only.
-
-- rockchip,standby_idle :	  Defined the standby idle period, memories are
-				  places into self-refresh than controller, pi,
-				  phy and dram clock will gating if bus is idle
-				  for standby_idle * DFI clocks.
-
-- rockchip,dram_dll_disb_freq :  It's defined the DDR3 dll bypass frequency in
-				  MHz, when ddr freq less than DRAM_DLL_DISB_FREQ,
-				  ddr3 dll will bypssed note: if dll was bypassed,
-				  the odt also stop working.
-
-- rockchip,phy_dll_disb_freq :	  Defined the PHY dll bypass frequency in
-				  MHz (Mega Hz), when ddr freq less than
-				  DRAM_DLL_DISB_FREQ, phy dll will bypssed.
-				  note: phy dll and phy odt are independent.
-
-- rockchip,ddr3_odt_disb_freq :  When dram type is DDR3, this parameter defined
-				  the odt disable frequency in MHz (Mega Hz),
-				  when ddr frequency less then ddr3_odt_disb_freq,
-				  the odt on dram side and controller side are
+				  it selects the DDR3 cl-trp-trcd type. It must be
+				  set according to "Speed Bin" in DDR3 datasheet,
+				  DO NOT use a smaller "Speed Bin" than specified
+				  for the DDR3 being used.
+
+- rockchip,pd_idle :		  Configure the PD_IDLE value. Defines the
+				  power-down idle period in which memories are
+				  placed into power-down mode if bus is idle
+				  for PD_IDLE DFI clock cycles.
+
+- rockchip,sr_idle :		  Configure the SR_IDLE value. Defines the
+				  self-refresh idle period in which memories are
+				  placed into self-refresh mode if bus is idle
+				  for SR_IDLE * 1024 DFI clock cycles (DFI
+				  clocks freq is half of DRAM clock), default
+				  value is "0".
+
+- rockchip,sr_mc_gate_idle :	  Defines the memory self-refresh and controller
+				  clock gating idle period. Memories are placed
+				  into self-refresh mode and memory controller
+				  clock arg gating started if bus is idle for
+				  sr_mc_gate_idle*1024 DFI clock cycles.
+
+- rockchip,srpd_lite_idle :	  Defines the self-refresh power down idle
+				  period in which memories are placed into
+				  self-refresh power down mode if bus is idle
+				  for srpd_lite_idle * 1024 DFI clock cycles.
+				  This parameter is for LPDDR4 only.
+
+- rockchip,standby_idle :	  Defines the standby idle period in which
+				  memories are placed into self-refresh mode.
+				  The controller, pi, PHY and DRAM clock will
+				  be gated if bus is idle for standby_idle * DFI
+				  clock cycles.
+
+- rockchip,dram_dll_disb_freq :	  Defines the DDR3 DLL bypass frequency in MHz.
+				  When DDR frequency is less than DRAM_DLL_DISB_FREQ,
+				  DDR3 DLL will be bypassed. Note: if DLL was bypassed,
+				  the odt will also stop working.
+
+- rockchip,phy_dll_disb_freq :	  Defines the PHY dll bypass frequency in
+				  MHz (Mega Hz). When DDR frequency is less than
+				  DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
+				  Note: PHY DLL and PHY ODT are independent.
+
+- rockchip,ddr3_odt_disb_freq :	  When the DRAM type is DDR3, this parameter defines
+				  the ODT disable frequency in MHz (Mega Hz).
+				  when the DDR frequency is  less then ddr3_odt_disb_freq,
+				  the ODT on the DRAM side and controller side are
 				  both disabled.
 
-- rockchip,ddr3_drv :		  When dram type is DDR3, this parameter define
-				  the dram side driver stength in ohm, default
+- rockchip,ddr3_drv :		  When the DRAM type is DDR3, this parameter defines
+				  the DRAM side driver strength in ohms. Default
 				  value is DDR3_DS_40ohm.
 
-- rockchip,ddr3_odt :		  When dram type is DDR3, this parameter define
-				  the dram side ODT stength in ohm, default value
+- rockchip,ddr3_odt :		  When the DRAM type is DDR3, this parameter defines
+				  the DRAM side ODT strength in ohms. Default value
 				  is DDR3_ODT_120ohm.
 
-- rockchip,phy_ddr3_ca_drv :	  When dram type is DDR3, this parameter define
-				  the phy side CA line(incluing command line,
+- rockchip,phy_ddr3_ca_drv :	  When the DRAM type is DDR3, this parameter defines
+				  the phy side CA line (incluing command line,
 				  address line and clock line) driver strength.
 				  Default value is PHY_DRV_ODT_40.
 
-- rockchip,phy_ddr3_dq_drv :	  When dram type is DDR3, this parameter define
-				  the phy side DQ line(incluing DQS/DQ/DM line)
-				  driver strength. default value is PHY_DRV_ODT_40.
+- rockchip,phy_ddr3_dq_drv :	  When the DRAM type is DDR3, this parameter defines
+				  the PHY side DQ line (including DQS/DQ/DM line)
+				  driver strength. Default value is PHY_DRV_ODT_40.
 
-- rockchip,phy_ddr3_odt : 	  When dram type is DDR3, this parameter define the
-				  phy side odt strength, default value is
+- rockchip,phy_ddr3_odt : 	  When the DRAM type is DDR3, this parameter defines
+				  the PHY side ODT strength. Default value is
 				  PHY_DRV_ODT_240.
 
-- rockchip,lpddr3_odt_disb_freq : When dram type is LPDDR3, this parameter defined
-				  then odt disable frequency in MHz (Mega Hz),
-				  when ddr frequency less then ddr3_odt_disb_freq,
-				  the odt on dram side and controller side are
+- rockchip,lpddr3_odt_disb_freq : When the DRAM type is LPDDR3, this parameter defines
+				  then ODT disable frequency in MHz (Mega Hz).
+				  When DDR frequency is less then ddr3_odt_disb_freq,
+				  the ODT on the DRAM side and controller side are
 				  both disabled.
 
-- rockchip,lpddr3_drv :	  When dram type is LPDDR3, this parameter define
-				  the dram side driver stength in ohm, default
+- rockchip,lpddr3_drv :		  When the DRAM type is LPDDR3, this parameter defines
+				  the DRAM side driver strength in ohms. Default
 				  value is LP3_DS_34ohm.
 
-- rockchip,lpddr3_odt :	  When dram type is LPDDR3, this parameter define
-				  the dram side ODT stength in ohm, default value
+- rockchip,lpddr3_odt :		  When the DRAM type is LPDDR3, this parameter defines
+				  the DRAM side ODT strength in ohms. Default value
 				  is LP3_ODT_240ohm.
 
-- rockchip,phy_lpddr3_ca_drv :	  When dram type is LPDDR3, this parameter define
-				  the phy side CA line(incluing command line,
+- rockchip,phy_lpddr3_ca_drv :	  When the DRAM type is LPDDR3, this parameter defines
+				  the PHY side CA line (including command line,
 				  address line and clock line) driver strength.
-				  default value is PHY_DRV_ODT_40.
+				  Default value is PHY_DRV_ODT_40.
 
-- rockchip,phy_lpddr3_dq_drv :	  When dram type is LPDDR3, this parameter define
-				  the phy side DQ line(incluing DQS/DQ/DM line)
-				  driver strength. default value is
+- rockchip,phy_lpddr3_dq_drv :	  When the DRAM type is LPDDR3, this parameter defines
+				  the PHY side DQ line (including DQS/DQ/DM line)
+				  driver strength. Default value is
 				  PHY_DRV_ODT_40.
 
 - rockchip,phy_lpddr3_odt : 	  When dram type is LPDDR3, this parameter define
 				  the phy side odt strength, default value is
 				  PHY_DRV_ODT_240.
 
-- rockchip,lpddr4_odt_disb_freq : When dram type is LPDDR4, this parameter
-				  defined the odt disable frequency in
-				  MHz (Mega Hz), when ddr frequency less then
-				  ddr3_odt_disb_freq, the odt on dram side and
+- rockchip,lpddr4_odt_disb_freq : When the DRAM type is LPDDR4, this parameter
+				  defines the ODT disable frequency in
+				  MHz (Mega Hz). When the DDR frequency is less then
+				  ddr3_odt_disb_freq, the ODT on the DRAM side and
 				  controller side are both disabled.
 
-- rockchip,lpddr4_drv :	  When dram type is LPDDR4, this parameter define
-				  the dram side driver stength in ohm, default
+- rockchip,lpddr4_drv :		  When the DRAM type is LPDDR4, this parameter defines
+				  the DRAM side driver strength in ohms. Default
 				  value is LP4_PDDS_60ohm.
 
-- rockchip,lpddr4_dq_odt : 	  When dram type is LPDDR4, this parameter define
-				  the dram side ODT on dqs/dq line stength in ohm,
-				  default value is LP4_DQ_ODT_40ohm.
+- rockchip,lpddr4_dq_odt : 	  When the DRAM type is LPDDR4, this parameter defines
+				  the DRAM side ODT on DQS/DQ line strength in ohms.
+				  Default value is LP4_DQ_ODT_40ohm.
 
-- rockchip,lpddr4_ca_odt :	  When dram type is LPDDR4, this parameter define
-				  the dram side ODT on ca line stength in ohm,
-				  default value is LP4_CA_ODT_40ohm.
+- rockchip,lpddr4_ca_odt :	  When the DRAM type is LPDDR4, this parameter defines
+				  the DRAM side ODT on CA line strength in ohms.
+				  Default value is LP4_CA_ODT_40ohm.
 
-- rockchip,phy_lpddr4_ca_drv :	  When dram type is LPDDR4, this parameter define
-				  the phy side  CA line(incluing command address
-				  line) driver strength. default value is
+- rockchip,phy_lpddr4_ca_drv :	  When the DRAM type is LPDDR4, this parameter defines
+				  the PHY side CA line (including command address
+				  line) driver strength. Default value is
 				  PHY_DRV_ODT_40.
 
-- rockchip,phy_lpddr4_ck_cs_drv : When dram type is LPDDR4, this parameter define
-				  the phy side clock line and cs line driver
-				  strength. default value is PHY_DRV_ODT_80.
+- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines
+				  the PHY side clock line and CS line driver
+				  strength. Default value is PHY_DRV_ODT_80.
 
-- rockchip,phy_lpddr4_dq_drv :	  When dram type is LPDDR4, this parameter define
-				  the phy side DQ line(incluing DQS/DQ/DM line)
-				  driver strength. default value is PHY_DRV_ODT_80.
+- rockchip,phy_lpddr4_dq_drv :	  When the DRAM type is LPDDR4, this parameter defines
+				  the PHY side DQ line (including DQS/DQ/DM line)
+				  driver strength. Default value is PHY_DRV_ODT_80.
 
-- rockchip,phy_lpddr4_odt :	  When dram type is LPDDR4, this parameter define
-				  the phy side odt strength, default value is
+- rockchip,phy_lpddr4_odt :	  When the DRAM type is LPDDR4, this parameter defines
+				  the PHY side ODT strength. Default value is
 				  PHY_DRV_ODT_60.
 
 Example:
-- 
2.17.0

Re: [PATCH v3 1/5] dt-bindings: devfreq: rk3399_dmc: improve binding documentation.

[Rob Herring]

On Sat, May 05, 2018 at 11:34:46AM +0200, Enric Balletbo i Serra wrote:
> From: Nick Milner <nick.milner@collabora.com>
> 
> There are several typos, references to non existent files, grammar and
> punctuation mistakes in the rk3399_dmc.txt binding. This patch tries
> to improve the binding documentation and fix these mistakes.
> 
> Signed-off-by: Nick Milner <nick.milner@collabora.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
> ---
> 
> Changes in v3: None
> Changes in v2:
> - [1/6] Add Acked-by MyungJoo Ham.
> - [6/6] Removed this patch from this series.
> 
>  .../bindings/devfreq/rk3399_dmc.txt           | 207 +++++++++---------
>  1 file changed, 105 insertions(+), 102 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v3 2/5] dt-bindings: clock: add rk3399 DDR3 standard speed bins.

[Enric Balletbo i Serra]

DDR3 SDRAM Standard (JESD79-3F) defines some standard speed bins for
DDR3 memories. The rk3399_dmc driver allows you to pass these values via
the device tree. For that purpose the devfreq/rk3399_dmc.txt binding
refers to a ddr.h file which does not exist. This patch adds the missing
defines in a include file called rk3399-ddr.h with the definition of
standard speed bins according to the ARM Trusted Firmware (ATF).

Fixes: c1ceb8f7c167 (Documentation: bindings: add dt documentation for rk3399 dmc)
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

Changes in v3: None
Changes in v2:
- [2/6] Improved commit message.
- [2/6] Rename ddr.h to rk3399-ddr.h because is SoC specific.

 .../bindings/devfreq/rk3399_dmc.txt           |  2 +-
 include/dt-bindings/clock/rk3399-ddr.h        | 56 +++++++++++++++++++
 2 files changed, 57 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/clock/rk3399-ddr.h

diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
index d83ef821d282..834637c7bae7 100644
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -19,7 +19,7 @@ Required properties:
 
 Following properties relate to DDR timing:
 
-- rockchip,dram_speed_bin :	  Value reference include/dt-bindings/clock/ddr.h,
+- rockchip,dram_speed_bin :	  Value reference include/dt-bindings/clock/rk3399-ddr.h,
 				  it selects the DDR3 cl-trp-trcd type. It must be
 				  set according to "Speed Bin" in DDR3 datasheet,
 				  DO NOT use a smaller "Speed Bin" than specified
diff --git a/include/dt-bindings/clock/rk3399-ddr.h b/include/dt-bindings/clock/rk3399-ddr.h
new file mode 100644
index 000000000000..ed2280844963
--- /dev/null
+++ b/include/dt-bindings/clock/rk3399-ddr.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+#ifndef DT_BINDINGS_DDR_H
+#define DT_BINDINGS_DDR_H
+
+/*
+ * DDR3 SDRAM Standard Speed Bins include tCK, tRCD, tRP, tRAS and tRC for
+ * each corresponding bin.
+ */
+
+/* DDR3-800 (5-5-5) */
+#define DDR3_800D	0
+/* DDR3-800 (6-6-6) */
+#define DDR3_800E	1
+/* DDR3-1066 (6-6-6) */
+#define DDR3_1066E	2
+/* DDR3-1066 (7-7-7) */
+#define DDR3_1066F	3
+/* DDR3-1066 (8-8-8) */
+#define DDR3_1066G	4
+/* DDR3-1333 (7-7-7) */
+#define DDR3_1333F	5
+/* DDR3-1333 (8-8-8) */
+#define DDR3_1333G	6
+/* DDR3-1333 (9-9-9) */
+#define DDR3_1333H	7
+/* DDR3-1333 (10-10-10) */
+#define DDR3_1333J 	8
+/* DDR3-1600 (8-8-8) */
+#define DDR3_1600G	9
+/* DDR3-1600 (9-9-9) */
+#define DDR3_1600H	10
+/* DDR3-1600 (10-10-10) */
+#define DDR3_1600J	11
+/* DDR3-1600 (11-11-11) */
+#define DDR3_1600K	12
+/* DDR3-1600 (10-10-10) */
+#define DDR3_1866J	13
+/* DDR3-1866 (11-11-11) */
+#define DDR3_1866K	14
+/* DDR3-1866 (12-12-12) */
+#define DDR3_1866L	15
+/* DDR3-1866 (13-13-13) */
+#define DDR3_1866M	16
+/* DDR3-2133 (11-11-11) */
+#define DDR3_2133K	17
+/* DDR3-2133 (12-12-12) */
+#define DDR3_2133L	18
+/* DDR3-2133 (13-13-13) */
+#define DDR3_2133M	19
+/* DDR3-2133 (14-14-14) */
+#define DDR3_2133N	20
+/* DDR3 ATF default */
+#define DDR3_DEFAULT	21
+
+#endif
-- 
2.17.0

Re: [PATCH v3 2/5] dt-bindings: clock: add rk3399 DDR3 standard speed bins.

[Rob Herring]

On Sat, May 05, 2018 at 11:34:47AM +0200, Enric Balletbo i Serra wrote:
> DDR3 SDRAM Standard (JESD79-3F) defines some standard speed bins for
> DDR3 memories. The rk3399_dmc driver allows you to pass these values via
> the device tree. For that purpose the devfreq/rk3399_dmc.txt binding
> refers to a ddr.h file which does not exist. This patch adds the missing
> defines in a include file called rk3399-ddr.h with the definition of
> standard speed bins according to the ARM Trusted Firmware (ATF).
> 
> Fixes: c1ceb8f7c167 (Documentation: bindings: add dt documentation for rk3399 dmc)
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> Changes in v3: None
> Changes in v2:
> - [2/6] Improved commit message.
> - [2/6] Rename ddr.h to rk3399-ddr.h because is SoC specific.
> 
>  .../bindings/devfreq/rk3399_dmc.txt           |  2 +-
>  include/dt-bindings/clock/rk3399-ddr.h        | 56 +++++++++++++++++++
>  2 files changed, 57 insertions(+), 1 deletion(-)
>  create mode 100644 include/dt-bindings/clock/rk3399-ddr.h

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v3 3/5] devfreq: rk3399_dmc: remove wait for dcf irq event.

[Enric Balletbo i Serra]

We have already wait dcf done in ATF, so don't need wait dcf irq
in kernel, besides, clear dcf irq in kernel will import competiton
between kernel and ATF, only handle dcf irq in ATF is a better way.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
---

Changes in v3: None
Changes in v2:
- [3/6] Add Reviewed-by Chanwoo Choi

 drivers/devfreq/rk3399_dmc.c | 53 +-----------------------------------
 1 file changed, 1 insertion(+), 52 deletions(-)

diff --git a/drivers/devfreq/rk3399_dmc.c b/drivers/devfreq/rk3399_dmc.c
index 5dfbfa3cc878..44a379657cd5 100644
--- a/drivers/devfreq/rk3399_dmc.c
+++ b/drivers/devfreq/rk3399_dmc.c
@@ -68,15 +68,6 @@ struct rk3399_dmcfreq {
 	struct devfreq_event_dev *edev;
 	struct mutex lock;
 	struct dram_timing timing;
-
-	/*
-	 * DDR Converser of Frequency (DCF) is used to implement DDR frequency
-	 * conversion without the participation of CPU, we will implement and
-	 * control it in arm trust firmware.
-	 */
-	wait_queue_head_t	wait_dcf_queue;
-	int irq;
-	int wait_dcf_flag;
 	struct regulator *vdd_center;
 	unsigned long rate, target_rate;
 	unsigned long volt, target_volt;
@@ -117,7 +108,6 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
 			goto out;
 		}
 	}
-	dmcfreq->wait_dcf_flag = 1;
 
 	err = clk_set_rate(dmcfreq->dmc_clk, target_rate);
 	if (err) {
@@ -128,14 +118,6 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
 		goto out;
 	}
 
-	/*
-	 * Wait until bcf irq happen, it means freq scaling finish in
-	 * arm trust firmware, use 100ms as timeout time.
-	 */
-	if (!wait_event_timeout(dmcfreq->wait_dcf_queue,
-				!dmcfreq->wait_dcf_flag, HZ / 10))
-		dev_warn(dev, "Timeout waiting for dcf interrupt\n");
-
 	/*
 	 * Check the dpll rate,
 	 * There only two result we will get,
@@ -241,22 +223,6 @@ static __maybe_unused int rk3399_dmcfreq_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(rk3399_dmcfreq_pm, rk3399_dmcfreq_suspend,
 			 rk3399_dmcfreq_resume);
 
-static irqreturn_t rk3399_dmc_irq(int irq, void *dev_id)
-{
-	struct rk3399_dmcfreq *dmcfreq = dev_id;
-	struct arm_smccc_res res;
-
-	dmcfreq->wait_dcf_flag = 0;
-	wake_up(&dmcfreq->wait_dcf_queue);
-
-	/* Clear the DCF interrupt */
-	arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, 0, 0,
-		      ROCKCHIP_SIP_CONFIG_DRAM_CLR_IRQ,
-		      0, 0, 0, 0, &res);
-
-	return IRQ_HANDLED;
-}
-
 static int of_get_ddr_timings(struct dram_timing *timing,
 			      struct device_node *np)
 {
@@ -330,16 +296,10 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = pdev->dev.of_node;
 	struct rk3399_dmcfreq *data;
-	int ret, irq, index, size;
+	int ret, index, size;
 	uint32_t *timing;
 	struct dev_pm_opp *opp;
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev,
-			"Cannot get the dmc interrupt resource: %d\n", irq);
-		return irq;
-	}
 	data = devm_kzalloc(dev, sizeof(struct rk3399_dmcfreq), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -358,17 +318,6 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
 		return PTR_ERR(data->dmc_clk);
 	};
 
-	data->irq = irq;
-	ret = devm_request_irq(dev, irq, rk3399_dmc_irq, 0,
-			       dev_name(dev), data);
-	if (ret) {
-		dev_err(dev, "Failed to request dmc irq: %d\n", ret);
-		return ret;
-	}
-
-	init_waitqueue_head(&data->wait_dcf_queue);
-	data->wait_dcf_flag = 0;
-
 	data->edev = devfreq_event_get_edev_by_phandle(dev, 0);
 	if (IS_ERR(data->edev))
 		return -EPROBE_DEFER;
-- 
2.17.0

[PATCH v3 4/5] dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.

[Enric Balletbo i Serra]

In ATF we already wait for DDR DVFS finish, so move the interrupts properties
to be optional.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
---

Changes in v3:
- [4/6] Move interrupts to be optional instead of remove.

Changes in v2:
- [4/6] Add Reviewed-by Chanwoo Choi.

 .../devicetree/bindings/devfreq/rk3399_dmc.txt         | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
index 834637c7bae7..90e2b6310b6e 100644
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -5,10 +5,6 @@ Required properties:
 - devfreq-events:	 Node to get DDR loading, Refer to
 			 Documentation/devicetree/bindings/devfreq/event/
 			 rockchip-dfi.txt
-- interrupts:		 The CPU interrupt number. The interrupt specifier
-			 format depends on the interrupt controller.
-			 It should be a DCF interrupt. When DDR DVFS finishes
-			 a DCF interrupt is triggered.
 - clocks:		 Phandles for clock specified in "clock-names" property
 - clock-names :		 The name of clock used by the DFI, must be
 			 "pclk_ddr_mon";
@@ -17,6 +13,12 @@ Required properties:
 - center-supply:	 DMC supply node.
 - status:		 Marks the node enabled/disabled.
 
+Optional properties:
+- interrupts:		 The CPU interrupt number. The interrupt specifier
+			 format depends on the interrupt controller.
+			 It should be a DCF interrupt. When DDR DVFS finishes
+			 a DCF interrupt is triggered.
+
 Following properties relate to DDR timing:
 
 - rockchip,dram_speed_bin :	  Value reference include/dt-bindings/clock/rk3399-ddr.h,
-- 
2.17.0

Re: [PATCH v3 4/5] dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.

[Rob Herring]

On Sat, May 05, 2018 at 11:34:49AM +0200, Enric Balletbo i Serra wrote:
> In ATF we already wait for DDR DVFS finish, so move the interrupts properties
> to be optional.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> 
> Changes in v3:
> - [4/6] Move interrupts to be optional instead of remove.
> 
> Changes in v2:
> - [4/6] Add Reviewed-by Chanwoo Choi.
> 
>  .../devicetree/bindings/devfreq/rk3399_dmc.txt         | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v3 5/5] devfreq: rk3399_dmc: do not print error when get supply and clk defer.

[Enric Balletbo i Serra]

From: Lin Huang <hl@rock-chips.com>

We just return -EPROBE_DEFER error code to caller and do not
print error message when try to get center logic regulator
and DMC clock defer.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
---

Changes in v3: None
Changes in v2:
- [5/6] Add Acked-by MyungJoo Ham.
- [5/6] Add Reviewed-by Chanwoo Choi.

 drivers/devfreq/rk3399_dmc.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/devfreq/rk3399_dmc.c b/drivers/devfreq/rk3399_dmc.c
index 44a379657cd5..5bfca028eaaf 100644
--- a/drivers/devfreq/rk3399_dmc.c
+++ b/drivers/devfreq/rk3399_dmc.c
@@ -308,12 +308,18 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
 
 	data->vdd_center = devm_regulator_get(dev, "center");
 	if (IS_ERR(data->vdd_center)) {
+		if (PTR_ERR(data->vdd_center) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
 		dev_err(dev, "Cannot get the regulator \"center\"\n");
 		return PTR_ERR(data->vdd_center);
 	}
 
 	data->dmc_clk = devm_clk_get(dev, "dmc_clk");
 	if (IS_ERR(data->dmc_clk)) {
+		if (PTR_ERR(data->dmc_clk) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
 		dev_err(dev, "Cannot get the clk dmc_clk\n");
 		return PTR_ERR(data->dmc_clk);
 	};
-- 
2.17.0