* MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests
@ 2018-05-15 22:04 Maciej W. Rozycki
0 siblings, 0 replies; 4+ messages in thread
From: Maciej W. Rozycki @ 2018-05-15 22:04 UTC (permalink / raw)
From: Maciej W. Rozycki <macro@mips.com>
commit 28e4213dd331e944e7fca1954a946829162ed9d4 upstream.
Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e.
Status.FR) is not supported as the lone purpose of Config5.FRE is to
emulate Status.FR=0 handling on FPU hardware that has Status.FR=1
hardwired[1][2]. Also we do not handle this case elsewhere, and assume
throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot
be set both at once for a task, leading to inconsistent behaviour if
this does happen.
Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting
PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear. This corresponds to
modes allowed by `mips_set_personality_fp'.
References:
[1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32
Privileged Resource Architecture", Imagination Technologies,
Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69
"Config5 Register Field Descriptions", p. 262
[2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64
Privileged Resource Architecture", Imagination Technologies,
Document Number: MD00091, Revision 6.03, December 22, 2015, Table
9.72 "Config5 Register Field Descriptions", p. 288
Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/19327/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kernel/process.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -699,6 +699,10 @@ int mips_set_process_fp_mode(struct task
if (value & ~known_bits)
return -EOPNOTSUPP;
+ /* Setting FRE without FR is not supported. */
+ if ((value & (PR_FP_MODE_FR | PR_FP_MODE_FRE)) == PR_FP_MODE_FRE)
+ return -EOPNOTSUPP;
+
/* Avoid inadvertently triggering emulation */
if ((value & PR_FP_MODE_FR) && raw_cpu_has_fpu &&
!(raw_current_cpu_data.fpu_id & MIPS_FPIR_F64))
Patches currently in stable-queue which might be from macro@mips.com are
queue-4.9/mips-ptrace-fix-ptrace_peekusr-requests-for-64-bit-fgrs.patch
queue-4.9/mips-prctl-disallow-fre-without-fr-with-pr_set_fp_mode-requests.patch
^ permalink raw reply [flat|nested] 4+ messages in thread
* MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests
@ 2018-05-15 22:04 Maciej W. Rozycki
0 siblings, 0 replies; 4+ messages in thread
From: Maciej W. Rozycki @ 2018-05-15 22:04 UTC (permalink / raw)
From: Maciej W. Rozycki <macro@mips.com>
commit 28e4213dd331e944e7fca1954a946829162ed9d4 upstream.
Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e.
Status.FR) is not supported as the lone purpose of Config5.FRE is to
emulate Status.FR=0 handling on FPU hardware that has Status.FR=1
hardwired[1][2]. Also we do not handle this case elsewhere, and assume
throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot
be set both at once for a task, leading to inconsistent behaviour if
this does happen.
Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting
PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear. This corresponds to
modes allowed by `mips_set_personality_fp'.
References:
[1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32
Privileged Resource Architecture", Imagination Technologies,
Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69
"Config5 Register Field Descriptions", p. 262
[2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64
Privileged Resource Architecture", Imagination Technologies,
Document Number: MD00091, Revision 6.03, December 22, 2015, Table
9.72 "Config5 Register Field Descriptions", p. 288
Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/19327/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kernel/process.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -721,6 +721,10 @@ int mips_set_process_fp_mode(struct task
if (value & ~known_bits)
return -EOPNOTSUPP;
+ /* Setting FRE without FR is not supported. */
+ if ((value & (PR_FP_MODE_FR | PR_FP_MODE_FRE)) == PR_FP_MODE_FRE)
+ return -EOPNOTSUPP;
+
/* Avoid inadvertently triggering emulation */
if ((value & PR_FP_MODE_FR) && raw_cpu_has_fpu &&
!(raw_current_cpu_data.fpu_id & MIPS_FPIR_F64))
Patches currently in stable-queue which might be from macro@mips.com are
queue-4.16/mips-ptrace-fix-ptrace_peekusr-requests-for-64-bit-fgrs.patch
queue-4.16/mips-prctl-disallow-fre-without-fr-with-pr_set_fp_mode-requests.patch
^ permalink raw reply [flat|nested] 4+ messages in thread
* MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests
@ 2018-05-15 22:04 Maciej W. Rozycki
0 siblings, 0 replies; 4+ messages in thread
From: Maciej W. Rozycki @ 2018-05-15 22:04 UTC (permalink / raw)
From: Maciej W. Rozycki <macro@mips.com>
commit 28e4213dd331e944e7fca1954a946829162ed9d4 upstream.
Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e.
Status.FR) is not supported as the lone purpose of Config5.FRE is to
emulate Status.FR=0 handling on FPU hardware that has Status.FR=1
hardwired[1][2]. Also we do not handle this case elsewhere, and assume
throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot
be set both at once for a task, leading to inconsistent behaviour if
this does happen.
Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting
PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear. This corresponds to
modes allowed by `mips_set_personality_fp'.
References:
[1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32
Privileged Resource Architecture", Imagination Technologies,
Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69
"Config5 Register Field Descriptions", p. 262
[2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64
Privileged Resource Architecture", Imagination Technologies,
Document Number: MD00091, Revision 6.03, December 22, 2015, Table
9.72 "Config5 Register Field Descriptions", p. 288
Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/19327/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kernel/process.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -680,6 +680,10 @@ int mips_set_process_fp_mode(struct task
if (value & ~known_bits)
return -EOPNOTSUPP;
+ /* Setting FRE without FR is not supported. */
+ if ((value & (PR_FP_MODE_FR | PR_FP_MODE_FRE)) == PR_FP_MODE_FRE)
+ return -EOPNOTSUPP;
+
/* Avoid inadvertently triggering emulation */
if ((value & PR_FP_MODE_FR) && raw_cpu_has_fpu &&
!(raw_current_cpu_data.fpu_id & MIPS_FPIR_F64))
Patches currently in stable-queue which might be from macro@mips.com are
queue-4.4/mips-ptrace-fix-ptrace_peekusr-requests-for-64-bit-fgrs.patch
queue-4.4/mips-prctl-disallow-fre-without-fr-with-pr_set_fp_mode-requests.patch
^ permalink raw reply [flat|nested] 4+ messages in thread
* MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests
@ 2018-05-15 22:04 Maciej W. Rozycki
0 siblings, 0 replies; 4+ messages in thread
From: Maciej W. Rozycki @ 2018-05-15 22:04 UTC (permalink / raw)
From: Maciej W. Rozycki <macro@mips.com>
commit 28e4213dd331e944e7fca1954a946829162ed9d4 upstream.
Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e.
Status.FR) is not supported as the lone purpose of Config5.FRE is to
emulate Status.FR=0 handling on FPU hardware that has Status.FR=1
hardwired[1][2]. Also we do not handle this case elsewhere, and assume
throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot
be set both at once for a task, leading to inconsistent behaviour if
this does happen.
Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting
PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear. This corresponds to
modes allowed by `mips_set_personality_fp'.
References:
[1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32
Privileged Resource Architecture", Imagination Technologies,
Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69
"Config5 Register Field Descriptions", p. 262
[2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64
Privileged Resource Architecture", Imagination Technologies,
Document Number: MD00091, Revision 6.03, December 22, 2015, Table
9.72 "Config5 Register Field Descriptions", p. 288
Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/19327/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kernel/process.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -721,6 +721,10 @@ int mips_set_process_fp_mode(struct task
if (value & ~known_bits)
return -EOPNOTSUPP;
+ /* Setting FRE without FR is not supported. */
+ if ((value & (PR_FP_MODE_FR | PR_FP_MODE_FRE)) == PR_FP_MODE_FRE)
+ return -EOPNOTSUPP;
+
/* Avoid inadvertently triggering emulation */
if ((value & PR_FP_MODE_FR) && raw_cpu_has_fpu &&
!(raw_current_cpu_data.fpu_id & MIPS_FPIR_F64))
Patches currently in stable-queue which might be from macro@mips.com are
queue-4.14/mips-ptrace-fix-ptrace_peekusr-requests-for-64-bit-fgrs.patch
queue-4.14/mips-prctl-disallow-fre-without-fr-with-pr_set_fp_mode-requests.patch
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-05-15 22:04 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-15 22:04 MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests Maciej W. Rozycki
-- strict thread matches above, loose matches on Subject: below --
2018-05-15 22:04 Maciej W. Rozycki
2018-05-15 22:04 Maciej W. Rozycki
2018-05-15 22:04 Maciej W. Rozycki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.