From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Laura Abbott <labbott@redhat.com>,
Michal Hocko <mhocko@kernel.org>,
"Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>,
Tony Lindgren <tony@atomide.com>,
Vlastimil Babka <vbabka@suse.cz>,
Johannes Weiner <hannes@cmpxchg.org>,
Laura Abbott <lauraa@codeaurora.org>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Mel Gorman <mgorman@techsingularity.net>,
Michal Nazarewicz <mina86@mina86.com>,
Minchan Kim <minchan@kernel.org>, Rik van Riel <riel@redhat.com>,
Russell King <linux@armlinux.org.uk>,
Will Deacon <will.deacon@arm.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Revert "mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE"
Date: Sat, 19 May 2018 17:46:32 +0300 [thread overview]
Message-ID: <20180519144632.GE23723@intel.com> (raw)
In-Reply-To: <20180518040104.GA17433@js1304-desktop>
On Fri, May 18, 2018 at 01:01:04PM +0900, Joonsoo Kim wrote:
> On Thu, May 17, 2018 at 10:53:32AM -0700, Laura Abbott wrote:
> > On 05/17/2018 10:08 AM, Michal Hocko wrote:
> > >On Thu 17-05-18 18:49:47, Michal Hocko wrote:
> > >>On Thu 17-05-18 16:58:32, Ville Syrjälä wrote:
> > >>>On Thu, May 17, 2018 at 04:36:29PM +0300, Ville Syrjälä wrote:
> > >>>>On Thu, May 17, 2018 at 03:21:09PM +0200, Michal Hocko wrote:
> > >>>>>On Thu 17-05-18 15:59:59, Ville Syrjala wrote:
> > >>>>>>From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > >>>>>>
> > >>>>>>This reverts commit bad8c6c0b1144694ecb0bc5629ede9b8b578b86e.
> > >>>>>>
> > >>>>>>Make x86 with HIGHMEM=y and CMA=y boot again.
> > >>>>>
> > >>>>>Is there any bug report with some more details? It is much more
> > >>>>>preferable to fix the issue rather than to revert the whole thing
> > >>>>>right away.
> > >>>>
> > >>>>The machine I have in front of me right now didn't give me anything.
> > >>>>Black screen, and netconsole was silent. No serial port on this
> > >>>>machine unfortunately.
> > >>>
> > >>>Booted on another machine with serial:
> > >>
> > >>Could you provide your .config please?
> > >>
> > >>[...]
> > >>>[ 0.000000] cma: Reserved 4 MiB at 0x0000000037000000
> > >>[...]
> > >>>[ 0.000000] BUG: Bad page state in process swapper pfn:377fe
> > >>>[ 0.000000] page:f53effc0 count:0 mapcount:-127 mapping:00000000 index:0x0
> > >>
> > >>OK, so this looks the be the source of the problem. -128 would be a
> > >>buddy page but I do not see anything that would set the counter to -127
> > >>and the real map count updates shouldn't really happen that early.
> > >>
> > >>Maybe CONFIG_DEBUG_VM and CONFIG_DEBUG_HIGHMEM will tell us more.
> > >
> > >Looking closer, I _think_ that the bug is in set_highmem_pages_init->is_highmem
> > >and zone_movable_is_highmem might force CMA pages in the zone movable to
> > >be initialized as highmem. And that sounds supicious to me. Joonsoo?
> > >
> >
> > For a point of reference, arm with this configuration doesn't hit this bug
> > because highmem pages are freed via the memblock interface only instead
> > of iterating through each zone. It looks like the x86 highmem code
> > assumes only a single highmem zone and/or it's disjoint?
>
> Good point! Reason of the crash is that the span of MOVABLE_ZONE is
> extended to whole node span for future CMA initialization, and,
> normal memory is wrongly freed here.
>
> Here goes the fix. Ville, Could you test below patch?
> I re-generated the issue on my side and this patch fixed it.
This gets me past the initial hurdles. But when I tried it on a machine
with an actual 32 bit OS it oopsed again later in the boot.
[ 0.000000] Linux version 4.17.0-rc5-mgm+ () (gcc version 6.4.0 (Gentoo 6.4.0-r1 p1.3)) #57 PREEMPT Sat May 19 17:25:27 EEST 2018
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6effff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007f6f7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f6f8000-0x000000007f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004
[ 0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x100000
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] log_buf_len: 2097152 bytes
[ 0.000000] early log buf free: 259584(99%)
[ 0.000000] RAMDISK: [mem 0x37e58000-0x37feffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37466000-0x375fd7ff]
[ 0.000000] Move RAMDISK from [mem 0x37e58000-0x37fef7ff] to [mem 0x37466000-0x375fd7ff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F5970 000014 (v00 FUJ )
[ 0.000000] ACPI: RSDT 0x000000007F6F1D5C 000034 (v01 FUJ FJNB16C 01260000 FUJ 00001000)
[ 0.000000] ACPI: FACP 0x000000007F6F78E0 000074 (v01 FUJ FJNB16C 01260000 FUJ 00001000)
[ 0.000000] ACPI: DSDT 0x000000007F6F1D90 005B50 (v01 FUJ FJNB16C 01260000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000007F6F8FC0 000040
[ 0.000000] ACPI: SSDT 0x000000007F6F7954 000288 (v01 FUJ FJNB16C 01260000 INTL 20030228)
[ 0.000000] ACPI: SSDT 0x000000007F6F7D68 000270 (v01 FUJ FJNB16C 01260000 MSFT 0100000E)
[ 0.000000] ACPI: BOOT 0x000000007F6F7FD8 000028 (v01 FUJ FJNB16C 01260000 FUJ 00001000)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] cma: Reserved 4 MiB at 0x37000000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x000000007f6effff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f6effff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at [mem 0x7f700000-0x7fefffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0xfc08
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfec0ffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 520094
[ 0.000000] Kernel command line: root=/dev/sda3 resume=/dev/sda2 lapic modprobe.blacklist=i915 drm.debug=0xe log_buf_len=2M console=ttyS0,115200
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: microcode updated early to revision 0x7, date = 2004-11-09
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6f0)
[ 0.000000] Memory: 2039028K/2087480K available (5733K kernel code, 627K rwdata, 2064K rodata, 640K init, 14252K bss, 44356K reserved, 4096K cma-reserved, 1178568K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
[ 0.000000] cpu_entry : 0xffc00000 - 0xffc28000 ( 160 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc184f000 - 0xc18ef000 ( 640 kB)
[ 0.000000] .data : 0xc1599460 - 0xc183ee40 (2710 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1599460 (5733 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 22084 entries in 44 pages
[ 0.000000] Running RCU self tests
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] NR_IRQS: 2304, nr_irqs: 24, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 131072
[ 0.000000] ... CHAINHASH_SIZE: 65536
[ 0.000000] memory used by lock dependency info: 5935 kB
[ 0.000000] per task-struct memory footprint: 1344 bytes
[ 0.000000] kmemleak: Early log buffer exceeded (785), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
[ 0.000000] ACPI: Core revision 20180313
[ 0.000000] ACPI: setting ELCR to 0200 (from 0800)
[ 0.003333] APIC: ACPI MADT or MP tables are not detected
[ 0.006666] APIC: Switch to virtual wire mode setup with no configuration
[ 0.009999] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.013333] tsc: Fast TSC calibration using PIT
[ 0.016666] tsc: Detected 1599.815 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x170f7614032, max_idle_ns: 440795204679 ns
[ 0.023355] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.94 BogoMIPS (lpj=5332716)
[ 0.026674] pid_max: default: 32768 minimum: 301
[ 0.030120] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.033348] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.037411] mce: CPU supports 5 MCE banks
[ 0.040032] CPU0: Thermal monitoring enabled (TM2)
[ 0.043354] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.046674] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.050006] CPU: Intel(R) Pentium(R) M processor 1600MHz (family: 0x6, model: 0x9, stepping: 0x5)
[ 0.053342] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
[ 0.056673] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.064166] Performance Events: p6 PMU driver.
[ 0.066686] ... version: 0
[ 0.070017] ... bit width: 32
[ 0.073346] ... generic registers: 2
[ 0.076674] ... value mask: 00000000ffffffff
[ 0.080007] ... max period: 000000007fffffff
[ 0.083340] ... fixed-purpose events: 0
[ 0.086673] ... event mask: 0000000000000003
[ 0.090172] Hierarchical SRCU implementation.
[ 0.094612] WARNING: CPU: 0 PID: 1 at ../kernel/kthread.c:505 kthread_park+0x70/0x80
[ 0.096666] Modules linked in:
[ 0.096666] CPU: 0 PID: 1 Comm: swapper Not tainted 4.17.0-rc5-mgm+ #57
[ 0.096666] Hardware name: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004
[ 0.096666] EIP: kthread_park+0x70/0x80
[ 0.096666] EFLAGS: 00210202 CPU: 0
[ 0.096666] EAX: f58fab80 EBX: f58b4680 ECX: 00000000 EDX: 00000005
[ 0.096666] ESI: c183b5c8 EDI: 00000000 EBP: f58d5f58 ESP: f58d5f54
[ 0.096666] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.096666] CR0: 80050033 CR2: ffd8f000 CR3: 018f2000 CR4: 000006d0
[ 0.096666] Call Trace:
[ 0.096666] smpboot_update_cpumask_percpu_thread+0x55/0x70
[ 0.096666] softlockup_update_smpboot_threads+0x2f/0x50
[ 0.096666] lockup_detector_reconfigure+0x1a/0x80
[ 0.096666] lockup_detector_init+0x62/0x6e
[ 0.096666] kernel_init_freeable+0xe6/0x31b
[ 0.096666] ? rest_init+0x1f0/0x1f0
[ 0.096666] kernel_init+0x10/0x110
[ 0.096666] ? schedule_tail_wrapper+0x9/0xc
[ 0.096666] ret_from_fork+0x2e/0x38
[ 0.096666] Code: 8d 76 00 5b 31 c0 5d c3 8d 76 00 0f 0b f6 c2 04 8b 98 38 03 00 00 74 c2 0f 0b 5b b8 da ff ff ff 5d c3 89 f6 8d bc 27 00 00 00 00 <0f> 0b b8 f0 ff ff ff eb c9 8d b4 26 00 00 00 00 3e 8d 74 26 00
[ 0.096666] irq event stamp: 810
[ 0.096666] hardirqs last enabled at (809): [<c1595ab7>] _raw_spin_unlock_irq+0x27/0x50
[ 0.096666] hardirqs last disabled at (810): [<c1596f27>] common_exception+0x61/0x82
[ 0.096666] softirqs last enabled at (286): [<c1598749>] __do_softirq+0x389/0x425
[ 0.096666] softirqs last disabled at (279): [<c101db7c>] call_on_stack+0x4c/0x60
[ 0.096666] WARNING: CPU: 0 PID: 1 at ../kernel/kthread.c:505 kthread_park+0x70/0x80
[ 0.096666] random: get_random_bytes called from print_oops_end_marker+0x57/0x70 with crng_init=0
[ 0.096666] ---[ end trace 37f4adc02e5109c7 ]---
[ 0.099999] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.100411] devtmpfs: initialized
[ 0.103996] Built 1 zonelists, mobility grouping on. Total pages: 510781
[ 0.106943] PM: Registering ACPI NVS region [mem 0x7f6f8000-0x7f6fffff] (32768 bytes)
[ 0.113811] kworker/u2:0 (15) used greatest stack depth: 6708 bytes left
[ 0.116909] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.120040] futex hash table entries: 256 (order: 1, 11264 bytes)
[ 0.126944] RTC time: 14:32:23, date: 05/19/18
[ 0.130504] NET: Registered protocol family 16
[ 0.136973] audit: initializing netlink subsys (disabled)
[ 0.140948] cpuidle: using governor ladder
[ 0.143370] audit: type=2000 audit(1526740342.139:1): state=initialized audit_enabled=0 res=1
[ 0.146993] cpuidle: using governor menu
[ 0.150336] Simple Boot Flag at 0x7f set to 0x1
[ 0.153453] ACPI: bus type PCI registered
[ 0.156767] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.166545] PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=3
[ 0.166689] PCI: Using configuration type 1 for base access
[ 0.177531] kworker/u2:1 (50) used greatest stack depth: 6428 bytes left
[ 0.200361] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[ 0.204690] ACPI: Added _OSI(Module Device)
[ 0.206788] ACPI: Added _OSI(Processor Device)
[ 0.210189] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.213366] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.216692] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.236095] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.253568] ACPI: Interpreter enabled
[ 0.256768] ACPI: (supports S0 S3 S4 S5)
[ 0.260020] ACPI: Using PIC for interrupt routing
[ 0.263464] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.267543] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.299274] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[ 0.312078] acpi PNP0C15:00: ACPI dock station (docks/bays count: 2)
[ 0.318281] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.320131] acpi PNP0A03:00: _OSC: OS supports [Segments]
[ 0.326797] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.330075] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.336967] PCI host bridge to bus 0000:00
[ 0.340080] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.343361] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.346701] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.358256] pci 0000:00:1f.0: quirk: [io 0xfc00-0xfc7f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.360189] pci 0000:00:1f.0: quirk: [io 0xfc80-0xfcbf] claimed by ICH4 GPIO
[ 0.363884] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.366796] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.370028] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.373360] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.382127] pci 0000:00:1e.0: PCI bridge to [bus 01-03] (subtractive decode)
[ 0.384025] pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06
[ 0.393971] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11)
[ 0.397013] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11)
[ 0.400280] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11)
[ 0.403652] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11)
[ 0.406944] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
[ 0.413586] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[ 0.420136] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 0.423589] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11)
[ 0.430878] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.433333] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.433434] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.436693] vgaarb: loaded
[ 0.440528] SCSI subsystem initialized
[ 0.443978] PCI: Using ACPI for IRQ routing
[ 0.454474] clocksource: Switched to clocksource tsc-early
[ 0.506079] pnp: PnP ACPI init
[ 0.510137] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.516193] system 00:00: [io 0xf800-0xf87f] has been reserved
[ 0.522136] system 00:00: [io 0xf880-0xf8ff] has been reserved
[ 0.528084] system 00:00: [io 0xfd00-0xfd6f] has been reserved
[ 0.534027] system 00:00: [io 0xfe00-0xfe01] has been reserved
[ 0.539965] system 00:00: [io 0xfc00-0xfc7f] has been reserved
[ 0.545900] system 00:00: [io 0xfc80-0xfcbf] has been reserved
[ 0.551821] system 00:00: [mem 0x000ccc00-0x000cffff] could not be reserved
[ 0.558827] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.565440] system 00:00: [mem 0xfec10000-0xfec1ffff] has been reserved
[ 0.578887] pnp: PnP ACPI: found 7 devices
[ 0.635088] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.644046] pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x8fffffff pref]
[ 0.651268] pci 0000:00:1f.1: BAR 5: assigned [mem 0x90000000-0x900003ff]
[ 0.658079] pci 0000:01:0a.0: BAR 0: assigned [mem 0x94000000-0x94000fff]
[ 0.664867] pci 0000:01:0a.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.672087] pci 0000:01:0a.0: BAR 10: assigned [mem 0x98000000-0x9bffffff]
[ 0.678960] pci 0000:01:0a.1: BAR 0: assigned [mem 0x9c000000-0x9c000fff]
[ 0.685747] pci 0000:01:0a.1: BAR 9: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.692966] pci 0000:01:0a.1: BAR 10: assigned [mem 0xa0000000-0xa3ffffff]
[ 0.699837] pci 0000:01:0a.0: BAR 7: assigned [io 0x3400-0x34ff]
[ 0.705927] pci 0000:01:0a.0: BAR 8: assigned [io 0x3800-0x38ff]
[ 0.712018] pci 0000:01:0a.1: BAR 7: assigned [io 0x3c00-0x3cff]
[ 0.718110] pci 0000:01:0a.1: BAR 8: assigned [io 0x1000-0x10ff]
[ 0.724208] pci 0000:01:0a.0: CardBus bridge to [bus 02]
[ 0.729517] pci 0000:01:0a.0: bridge window [io 0x3400-0x34ff]
[ 0.735609] pci 0000:01:0a.0: bridge window [io 0x3800-0x38ff]
[ 0.741700] pci 0000:01:0a.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.748919] pci 0000:01:0a.0: bridge window [mem 0x98000000-0x9bffffff]
[ 0.755705] pci 0000:01:0a.1: CardBus bridge to [bus 03]
[ 0.761013] pci 0000:01:0a.1: bridge window [io 0x3c00-0x3cff]
[ 0.767103] pci 0000:01:0a.1: bridge window [io 0x1000-0x10ff]
[ 0.773195] pci 0000:01:0a.1: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.780414] pci 0000:01:0a.1: bridge window [mem 0xa0000000-0xa3ffffff]
[ 0.787200] pci 0000:00:1e.0: PCI bridge to [bus 01-03]
[ 0.792424] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.798518] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.805304] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x8fffffff pref]
[ 0.813017] NET: Registered protocol family 2
[ 0.817943] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes)
[ 0.825772] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.832888] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.840507] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.846996] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.853062] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.859688] NET: Registered protocol family 1
[ 0.864101] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.872882] PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.878545] PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.884180] PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.889816] PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 0.895590] Unpacking initramfs...
[ 0.905875] Freeing initrd memory: 1632K
[ 0.959992] DMA-API: preallocated 65536 debug entries
[ 0.965077] DMA-API: debugging enabled by kernel config
[ 0.971831] Scanning for low memory corruption every 60 seconds
[ 0.980868] Initialise system trusted keyrings
[ 0.986717] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[ 1.012709] pstore: using deflate compression
[ 1.019013] Key type asymmetric registered
[ 1.023308] Asymmetric key parser 'x509' registered
[ 1.028290] bounce: pool size: 64 pages
[ 1.032306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.039796] io scheduler noop registered
[ 1.043738] io scheduler deadline registered
[ 1.048047] io scheduler cfq registered (default)
[ 1.053568] ACPI: AC Adapter [AC] (on-line)
[ 1.058317] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.066914] ACPI: Power Button [PWRB]
[ 1.070872] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.079891] ACPI: Lid Switch [LID]
[ 1.083628] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.091221] ACPI: Power Button [PWRF]
[ 1.095148] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.104099] ACPI: Battery Slot [CMB1] (battery present)
[ 1.109509] isapnp: Scanning for PnP cards...
[ 1.114142] clocksource: Switched to clocksource acpi_pm
[ 1.123837] ACPI: Battery Slot [CMB2] (battery absent)
[ 1.482272] isapnp: No Plug & Play device found
[ 1.487182] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.514395] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.522211] serial 00:05: skipping CIR port at 0x2e8 / 0x0, IRQ 3
[ 1.530173] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.538301] BUG: unable to handle kernel NULL pointer dereference at 00000000
[ 1.540010] *pde = 00000000
[ 1.540010] Oops: 0002 [#1] PREEMPT
[ 1.540010] Modules linked in:
[ 1.540010] CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.17.0-rc5-mgm+ #57
[ 1.540010] Hardware name: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004
[ 1.540010] EIP: dma_direct_alloc+0x22f/0x260
[ 1.540010] EFLAGS: 00210246 CPU: 0
[ 1.540010] EAX: 00000000 EBX: 00000000 ECX: 00000200 EDX: 00000000
[ 1.540010] ESI: 014000c4 EDI: 00000000 EBP: f58d5cdc ESP: f58d5cb8
[ 1.540010] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 1.540010] CR0: 80050033 CR2: 00000000 CR3: 018f2000 CR4: 000006d0
[ 1.540010] Call Trace:
[ 1.540010] ? dma_direct_mapping_error+0x10/0x10
[ 1.540010] dmam_alloc_coherent+0xe8/0x160
[ 1.540010] ata_bmdma_port_start+0x42/0x70
[ 1.540010] piix_port_start+0x1a/0x20
[ 1.540010] ata_host_start.part.9+0xcb/0x1c0
[ 1.540010] ata_host_start+0x18/0x20
[ 1.540010] ata_pci_sff_activate_host+0x30/0x2b0
[ 1.540010] ? pci_write_config_byte+0x50/0x60
[ 1.540010] ? ata_bmdma_port_intr+0xe0/0xe0
[ 1.540010] piix_init_one+0x2e1/0x5e0
[ 1.540010] ? _raw_spin_unlock_irqrestore+0x5d/0x80
[ 1.540010] pci_device_probe+0x9a/0x130
[ 1.540010] ? devices_kset_move_last+0x67/0xe0
[ 1.540010] ? sysfs_create_link+0x25/0x50
[ 1.540010] driver_probe_device+0x319/0x4e0
[ 1.540010] ? _raw_spin_unlock+0x2c/0x50
[ 1.540010] ? pci_match_device+0xd2/0x100
[ 1.540010] __driver_attach+0xd9/0x100
[ 1.540010] ? klist_next+0x6b/0xe0
[ 1.540010] ? driver_probe_device+0x4e0/0x4e0
[ 1.540010] bus_for_each_dev+0x4b/0x90
[ 1.540010] driver_attach+0x1e/0x20
[ 1.540010] ? driver_probe_device+0x4e0/0x4e0
[ 1.540010] bus_add_driver+0x18f/0x280
[ 1.540010] driver_register+0x5d/0xf0
[ 1.540010] ? ata_sff_init+0x35/0x35
[ 1.540010] __pci_register_driver+0x50/0x60
[ 1.540010] piix_init+0x19/0x29
[ 1.540010] do_one_initcall+0x62/0x330
[ 1.540010] ? parse_args+0x1cd/0x410
[ 1.540010] kernel_init_freeable+0x214/0x31b
[ 1.540010] ? rest_init+0x1f0/0x1f0
[ 1.540010] kernel_init+0x10/0x110
[ 1.540010] ? schedule_tail_wrapper+0x9/0xc
[ 1.540010] ret_from_fork+0x2e/0x38
[ 1.540010] Code: 0f 84 02 ff ff ff eb d4 8d 74 26 00 f6 c2 01 75 21 f7 c7 02 00 00 00 75 24 f7 c7 04 00 00 00 75 29 89 d9 31 c0 c1 e9 02 83 e3 03 <f3> ab e9 c4 fe ff ff c6 02 00 8d 7a 01 8b 5d e0 eb d4 66 c7 07
[ 1.540010] EIP: dma_direct_alloc+0x22f/0x260 SS:ESP: 0068:f58d5cb8
[ 1.540010] CR2: 0000000000000000
[ 1.540010] ---[ end trace 37f4adc02e5109c8 ]---
[ 1.540010] BUG: sleeping function called from invalid context at ../include/linux/cgroup-defs.h:696
[ 1.540010] in_atomic(): 0, irqs_disabled(): 1, pid: 1, name: swapper
[ 1.540010] INFO: lockdep is turned off.
[ 1.540010] irq event stamp: 366166
[ 1.540010] hardirqs last enabled at (366165): [<c1595a6d>] _raw_spin_unlock_irqrestore+0x5d/0x80
[ 1.540010] hardirqs last disabled at (366166): [<c1596f27>] common_exception+0x61/0x82
[ 1.540010] softirqs last enabled at (363740): [<c1598749>] __do_softirq+0x389/0x425
[ 1.540010] softirqs last disabled at (363703): [<c101db7c>] call_on_stack+0x4c/0x60
[ 1.540010] CPU: 0 PID: 1 Comm: swapper Tainted: G D W 4.17.0-rc5-mgm+ #57
[ 1.540010] Hardware name: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004
[ 1.540010] Call Trace:
[ 1.540010] dump_stack+0x16/0x26
[ 1.540010] ___might_sleep+0x1f3/0x260
[ 1.540010] ? vprintk_emit+0x21c/0x420
[ 1.540010] __might_sleep+0x36/0x90
[ 1.540010] exit_signals+0x1f/0xf0
[ 1.540010] do_exit+0x79/0xb80
[ 1.540010] ? kernel_init_freeable+0x214/0x31b
[ 1.540010] ? rest_init+0x1f0/0x1f0
[ 1.540010] ? kernel_init+0x10/0x110
[ 1.540010] rewind_stack_do_exit+0x10/0x12
[ 1.891523] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[ 1.891523]
[ 1.894765] Kernel Offset: disabled
[ 1.894765] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[ 1.894765] ]---
[ 2.153352] random: fast init done
(gdb) list *(dma_direct_alloc+0x22f)
0x573fbf is in dma_direct_alloc (../lib/dma-direct.c:104).
94
95 if (!page)
96 return NULL;
97 ret = page_address(page);
98 if (force_dma_unencrypted()) {
99 set_memory_decrypted((unsigned long)ret, 1 << page_order);
100 *dma_handle = __phys_to_dma(dev, page_to_phys(page));
101 } else {
102 *dma_handle = phys_to_dma(dev, page_to_phys(page));
103 }
104 memset(ret, 0, size);
105 return ret;
106 }
--
Ville Syrjälä
Intel
WARNING: multiple messages have this Message-ID (diff)
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Laura Abbott <labbott@redhat.com>,
Michal Hocko <mhocko@kernel.org>,
"Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>,
Tony Lindgren <tony@atomide.com>,
Vlastimil Babka <vbabka@suse.cz>,
Johannes Weiner <hannes@cmpxchg.org>,
Laura Abbott <lauraa@codeaurora.org>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Mel Gorman <mgorman@techsingularity.net>,
Michal Nazarewicz <mina86@mina86.com>,
Minchan Kim <minchan@kernel.org>, Rik van Riel <riel@redhat.com>,
Russell King <linux@armlinux.org.uk>,
Will Deacon <will.deacon@arm.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Revert "mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE"
Date: Sat, 19 May 2018 17:46:32 +0300 [thread overview]
Message-ID: <20180519144632.GE23723@intel.com> (raw)
In-Reply-To: <20180518040104.GA17433@js1304-desktop>
On Fri, May 18, 2018 at 01:01:04PM +0900, Joonsoo Kim wrote:
> On Thu, May 17, 2018 at 10:53:32AM -0700, Laura Abbott wrote:
> > On 05/17/2018 10:08 AM, Michal Hocko wrote:
> > >On Thu 17-05-18 18:49:47, Michal Hocko wrote:
> > >>On Thu 17-05-18 16:58:32, Ville Syrjala wrote:
> > >>>On Thu, May 17, 2018 at 04:36:29PM +0300, Ville Syrjala wrote:
> > >>>>On Thu, May 17, 2018 at 03:21:09PM +0200, Michal Hocko wrote:
> > >>>>>On Thu 17-05-18 15:59:59, Ville Syrjala wrote:
> > >>>>>>From: Ville Syrjala <ville.syrjala@linux.intel.com>
> > >>>>>>
> > >>>>>>This reverts commit bad8c6c0b1144694ecb0bc5629ede9b8b578b86e.
> > >>>>>>
> > >>>>>>Make x86 with HIGHMEM=y and CMA=y boot again.
> > >>>>>
> > >>>>>Is there any bug report with some more details? It is much more
> > >>>>>preferable to fix the issue rather than to revert the whole thing
> > >>>>>right away.
> > >>>>
> > >>>>The machine I have in front of me right now didn't give me anything.
> > >>>>Black screen, and netconsole was silent. No serial port on this
> > >>>>machine unfortunately.
> > >>>
> > >>>Booted on another machine with serial:
> > >>
> > >>Could you provide your .config please?
> > >>
> > >>[...]
> > >>>[ 0.000000] cma: Reserved 4 MiB at 0x0000000037000000
> > >>[...]
> > >>>[ 0.000000] BUG: Bad page state in process swapper pfn:377fe
> > >>>[ 0.000000] page:f53effc0 count:0 mapcount:-127 mapping:00000000 index:0x0
> > >>
> > >>OK, so this looks the be the source of the problem. -128 would be a
> > >>buddy page but I do not see anything that would set the counter to -127
> > >>and the real map count updates shouldn't really happen that early.
> > >>
> > >>Maybe CONFIG_DEBUG_VM and CONFIG_DEBUG_HIGHMEM will tell us more.
> > >
> > >Looking closer, I _think_ that the bug is in set_highmem_pages_init->is_highmem
> > >and zone_movable_is_highmem might force CMA pages in the zone movable to
> > >be initialized as highmem. And that sounds supicious to me. Joonsoo?
> > >
> >
> > For a point of reference, arm with this configuration doesn't hit this bug
> > because highmem pages are freed via the memblock interface only instead
> > of iterating through each zone. It looks like the x86 highmem code
> > assumes only a single highmem zone and/or it's disjoint?
>
> Good point! Reason of the crash is that the span of MOVABLE_ZONE is
> extended to whole node span for future CMA initialization, and,
> normal memory is wrongly freed here.
>
> Here goes the fix. Ville, Could you test below patch?
> I re-generated the issue on my side and this patch fixed it.
This gets me past the initial hurdles. But when I tried it on a machine
with an actual 32 bit OS it oopsed again later in the boot.
[ 0.000000] Linux version 4.17.0-rc5-mgm+ () (gcc version 6.4.0 (Gentoo 6.4.0-r1 p1.3)) #57 PREEMPT Sat May 19 17:25:27 EEST 2018
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6effff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007f6f7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f6f8000-0x000000007f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004
[ 0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x100000
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] log_buf_len: 2097152 bytes
[ 0.000000] early log buf free: 259584(99%)
[ 0.000000] RAMDISK: [mem 0x37e58000-0x37feffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37466000-0x375fd7ff]
[ 0.000000] Move RAMDISK from [mem 0x37e58000-0x37fef7ff] to [mem 0x37466000-0x375fd7ff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F5970 000014 (v00 FUJ )
[ 0.000000] ACPI: RSDT 0x000000007F6F1D5C 000034 (v01 FUJ FJNB16C 01260000 FUJ 00001000)
[ 0.000000] ACPI: FACP 0x000000007F6F78E0 000074 (v01 FUJ FJNB16C 01260000 FUJ 00001000)
[ 0.000000] ACPI: DSDT 0x000000007F6F1D90 005B50 (v01 FUJ FJNB16C 01260000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000007F6F8FC0 000040
[ 0.000000] ACPI: SSDT 0x000000007F6F7954 000288 (v01 FUJ FJNB16C 01260000 INTL 20030228)
[ 0.000000] ACPI: SSDT 0x000000007F6F7D68 000270 (v01 FUJ FJNB16C 01260000 MSFT 0100000E)
[ 0.000000] ACPI: BOOT 0x000000007F6F7FD8 000028 (v01 FUJ FJNB16C 01260000 FUJ 00001000)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] cma: Reserved 4 MiB at 0x37000000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x000000007f6effff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f6effff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at [mem 0x7f700000-0x7fefffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0xfc08
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfec0ffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 520094
[ 0.000000] Kernel command line: root=/dev/sda3 resume=/dev/sda2 lapic modprobe.blacklist=i915 drm.debug=0xe log_buf_len=2M console=ttyS0,115200
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: microcode updated early to revision 0x7, date = 2004-11-09
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6f0)
[ 0.000000] Memory: 2039028K/2087480K available (5733K kernel code, 627K rwdata, 2064K rodata, 640K init, 14252K bss, 44356K reserved, 4096K cma-reserved, 1178568K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
[ 0.000000] cpu_entry : 0xffc00000 - 0xffc28000 ( 160 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc184f000 - 0xc18ef000 ( 640 kB)
[ 0.000000] .data : 0xc1599460 - 0xc183ee40 (2710 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1599460 (5733 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 22084 entries in 44 pages
[ 0.000000] Running RCU self tests
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] NR_IRQS: 2304, nr_irqs: 24, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 131072
[ 0.000000] ... CHAINHASH_SIZE: 65536
[ 0.000000] memory used by lock dependency info: 5935 kB
[ 0.000000] per task-struct memory footprint: 1344 bytes
[ 0.000000] kmemleak: Early log buffer exceeded (785), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
[ 0.000000] ACPI: Core revision 20180313
[ 0.000000] ACPI: setting ELCR to 0200 (from 0800)
[ 0.003333] APIC: ACPI MADT or MP tables are not detected
[ 0.006666] APIC: Switch to virtual wire mode setup with no configuration
[ 0.009999] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.013333] tsc: Fast TSC calibration using PIT
[ 0.016666] tsc: Detected 1599.815 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x170f7614032, max_idle_ns: 440795204679 ns
[ 0.023355] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.94 BogoMIPS (lpj=5332716)
[ 0.026674] pid_max: default: 32768 minimum: 301
[ 0.030120] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.033348] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.037411] mce: CPU supports 5 MCE banks
[ 0.040032] CPU0: Thermal monitoring enabled (TM2)
[ 0.043354] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.046674] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.050006] CPU: Intel(R) Pentium(R) M processor 1600MHz (family: 0x6, model: 0x9, stepping: 0x5)
[ 0.053342] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
[ 0.056673] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.064166] Performance Events: p6 PMU driver.
[ 0.066686] ... version: 0
[ 0.070017] ... bit width: 32
[ 0.073346] ... generic registers: 2
[ 0.076674] ... value mask: 00000000ffffffff
[ 0.080007] ... max period: 000000007fffffff
[ 0.083340] ... fixed-purpose events: 0
[ 0.086673] ... event mask: 0000000000000003
[ 0.090172] Hierarchical SRCU implementation.
[ 0.094612] WARNING: CPU: 0 PID: 1 at ../kernel/kthread.c:505 kthread_park+0x70/0x80
[ 0.096666] Modules linked in:
[ 0.096666] CPU: 0 PID: 1 Comm: swapper Not tainted 4.17.0-rc5-mgm+ #57
[ 0.096666] Hardware name: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004
[ 0.096666] EIP: kthread_park+0x70/0x80
[ 0.096666] EFLAGS: 00210202 CPU: 0
[ 0.096666] EAX: f58fab80 EBX: f58b4680 ECX: 00000000 EDX: 00000005
[ 0.096666] ESI: c183b5c8 EDI: 00000000 EBP: f58d5f58 ESP: f58d5f54
[ 0.096666] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.096666] CR0: 80050033 CR2: ffd8f000 CR3: 018f2000 CR4: 000006d0
[ 0.096666] Call Trace:
[ 0.096666] smpboot_update_cpumask_percpu_thread+0x55/0x70
[ 0.096666] softlockup_update_smpboot_threads+0x2f/0x50
[ 0.096666] lockup_detector_reconfigure+0x1a/0x80
[ 0.096666] lockup_detector_init+0x62/0x6e
[ 0.096666] kernel_init_freeable+0xe6/0x31b
[ 0.096666] ? rest_init+0x1f0/0x1f0
[ 0.096666] kernel_init+0x10/0x110
[ 0.096666] ? schedule_tail_wrapper+0x9/0xc
[ 0.096666] ret_from_fork+0x2e/0x38
[ 0.096666] Code: 8d 76 00 5b 31 c0 5d c3 8d 76 00 0f 0b f6 c2 04 8b 98 38 03 00 00 74 c2 0f 0b 5b b8 da ff ff ff 5d c3 89 f6 8d bc 27 00 00 00 00 <0f> 0b b8 f0 ff ff ff eb c9 8d b4 26 00 00 00 00 3e 8d 74 26 00
[ 0.096666] irq event stamp: 810
[ 0.096666] hardirqs last enabled at (809): [<c1595ab7>] _raw_spin_unlock_irq+0x27/0x50
[ 0.096666] hardirqs last disabled at (810): [<c1596f27>] common_exception+0x61/0x82
[ 0.096666] softirqs last enabled at (286): [<c1598749>] __do_softirq+0x389/0x425
[ 0.096666] softirqs last disabled at (279): [<c101db7c>] call_on_stack+0x4c/0x60
[ 0.096666] WARNING: CPU: 0 PID: 1 at ../kernel/kthread.c:505 kthread_park+0x70/0x80
[ 0.096666] random: get_random_bytes called from print_oops_end_marker+0x57/0x70 with crng_init=0
[ 0.096666] ---[ end trace 37f4adc02e5109c7 ]---
[ 0.099999] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.100411] devtmpfs: initialized
[ 0.103996] Built 1 zonelists, mobility grouping on. Total pages: 510781
[ 0.106943] PM: Registering ACPI NVS region [mem 0x7f6f8000-0x7f6fffff] (32768 bytes)
[ 0.113811] kworker/u2:0 (15) used greatest stack depth: 6708 bytes left
[ 0.116909] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.120040] futex hash table entries: 256 (order: 1, 11264 bytes)
[ 0.126944] RTC time: 14:32:23, date: 05/19/18
[ 0.130504] NET: Registered protocol family 16
[ 0.136973] audit: initializing netlink subsys (disabled)
[ 0.140948] cpuidle: using governor ladder
[ 0.143370] audit: type=2000 audit(1526740342.139:1): state=initialized audit_enabled=0 res=1
[ 0.146993] cpuidle: using governor menu
[ 0.150336] Simple Boot Flag at 0x7f set to 0x1
[ 0.153453] ACPI: bus type PCI registered
[ 0.156767] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.166545] PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=3
[ 0.166689] PCI: Using configuration type 1 for base access
[ 0.177531] kworker/u2:1 (50) used greatest stack depth: 6428 bytes left
[ 0.200361] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[ 0.204690] ACPI: Added _OSI(Module Device)
[ 0.206788] ACPI: Added _OSI(Processor Device)
[ 0.210189] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.213366] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.216692] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.236095] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.253568] ACPI: Interpreter enabled
[ 0.256768] ACPI: (supports S0 S3 S4 S5)
[ 0.260020] ACPI: Using PIC for interrupt routing
[ 0.263464] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.267543] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.299274] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[ 0.312078] acpi PNP0C15:00: ACPI dock station (docks/bays count: 2)
[ 0.318281] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.320131] acpi PNP0A03:00: _OSC: OS supports [Segments]
[ 0.326797] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.330075] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.336967] PCI host bridge to bus 0000:00
[ 0.340080] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.343361] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.346701] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.358256] pci 0000:00:1f.0: quirk: [io 0xfc00-0xfc7f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.360189] pci 0000:00:1f.0: quirk: [io 0xfc80-0xfcbf] claimed by ICH4 GPIO
[ 0.363884] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.366796] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.370028] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.373360] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.382127] pci 0000:00:1e.0: PCI bridge to [bus 01-03] (subtractive decode)
[ 0.384025] pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06
[ 0.393971] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11)
[ 0.397013] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11)
[ 0.400280] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11)
[ 0.403652] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11)
[ 0.406944] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
[ 0.413586] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[ 0.420136] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 0.423589] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11)
[ 0.430878] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.433333] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.433434] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.436693] vgaarb: loaded
[ 0.440528] SCSI subsystem initialized
[ 0.443978] PCI: Using ACPI for IRQ routing
[ 0.454474] clocksource: Switched to clocksource tsc-early
[ 0.506079] pnp: PnP ACPI init
[ 0.510137] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.516193] system 00:00: [io 0xf800-0xf87f] has been reserved
[ 0.522136] system 00:00: [io 0xf880-0xf8ff] has been reserved
[ 0.528084] system 00:00: [io 0xfd00-0xfd6f] has been reserved
[ 0.534027] system 00:00: [io 0xfe00-0xfe01] has been reserved
[ 0.539965] system 00:00: [io 0xfc00-0xfc7f] has been reserved
[ 0.545900] system 00:00: [io 0xfc80-0xfcbf] has been reserved
[ 0.551821] system 00:00: [mem 0x000ccc00-0x000cffff] could not be reserved
[ 0.558827] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.565440] system 00:00: [mem 0xfec10000-0xfec1ffff] has been reserved
[ 0.578887] pnp: PnP ACPI: found 7 devices
[ 0.635088] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.644046] pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x8fffffff pref]
[ 0.651268] pci 0000:00:1f.1: BAR 5: assigned [mem 0x90000000-0x900003ff]
[ 0.658079] pci 0000:01:0a.0: BAR 0: assigned [mem 0x94000000-0x94000fff]
[ 0.664867] pci 0000:01:0a.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.672087] pci 0000:01:0a.0: BAR 10: assigned [mem 0x98000000-0x9bffffff]
[ 0.678960] pci 0000:01:0a.1: BAR 0: assigned [mem 0x9c000000-0x9c000fff]
[ 0.685747] pci 0000:01:0a.1: BAR 9: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.692966] pci 0000:01:0a.1: BAR 10: assigned [mem 0xa0000000-0xa3ffffff]
[ 0.699837] pci 0000:01:0a.0: BAR 7: assigned [io 0x3400-0x34ff]
[ 0.705927] pci 0000:01:0a.0: BAR 8: assigned [io 0x3800-0x38ff]
[ 0.712018] pci 0000:01:0a.1: BAR 7: assigned [io 0x3c00-0x3cff]
[ 0.718110] pci 0000:01:0a.1: BAR 8: assigned [io 0x1000-0x10ff]
[ 0.724208] pci 0000:01:0a.0: CardBus bridge to [bus 02]
[ 0.729517] pci 0000:01:0a.0: bridge window [io 0x3400-0x34ff]
[ 0.735609] pci 0000:01:0a.0: bridge window [io 0x3800-0x38ff]
[ 0.741700] pci 0000:01:0a.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.748919] pci 0000:01:0a.0: bridge window [mem 0x98000000-0x9bffffff]
[ 0.755705] pci 0000:01:0a.1: CardBus bridge to [bus 03]
[ 0.761013] pci 0000:01:0a.1: bridge window [io 0x3c00-0x3cff]
[ 0.767103] pci 0000:01:0a.1: bridge window [io 0x1000-0x10ff]
[ 0.773195] pci 0000:01:0a.1: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.780414] pci 0000:01:0a.1: bridge window [mem 0xa0000000-0xa3ffffff]
[ 0.787200] pci 0000:00:1e.0: PCI bridge to [bus 01-03]
[ 0.792424] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.798518] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.805304] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x8fffffff pref]
[ 0.813017] NET: Registered protocol family 2
[ 0.817943] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes)
[ 0.825772] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.832888] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.840507] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.846996] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.853062] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.859688] NET: Registered protocol family 1
[ 0.864101] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.872882] PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.878545] PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.884180] PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.889816] PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 0.895590] Unpacking initramfs...
[ 0.905875] Freeing initrd memory: 1632K
[ 0.959992] DMA-API: preallocated 65536 debug entries
[ 0.965077] DMA-API: debugging enabled by kernel config
[ 0.971831] Scanning for low memory corruption every 60 seconds
[ 0.980868] Initialise system trusted keyrings
[ 0.986717] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[ 1.012709] pstore: using deflate compression
[ 1.019013] Key type asymmetric registered
[ 1.023308] Asymmetric key parser 'x509' registered
[ 1.028290] bounce: pool size: 64 pages
[ 1.032306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.039796] io scheduler noop registered
[ 1.043738] io scheduler deadline registered
[ 1.048047] io scheduler cfq registered (default)
[ 1.053568] ACPI: AC Adapter [AC] (on-line)
[ 1.058317] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.066914] ACPI: Power Button [PWRB]
[ 1.070872] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.079891] ACPI: Lid Switch [LID]
[ 1.083628] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.091221] ACPI: Power Button [PWRF]
[ 1.095148] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.104099] ACPI: Battery Slot [CMB1] (battery present)
[ 1.109509] isapnp: Scanning for PnP cards...
[ 1.114142] clocksource: Switched to clocksource acpi_pm
[ 1.123837] ACPI: Battery Slot [CMB2] (battery absent)
[ 1.482272] isapnp: No Plug & Play device found
[ 1.487182] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.514395] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.522211] serial 00:05: skipping CIR port at 0x2e8 / 0x0, IRQ 3
[ 1.530173] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.538301] BUG: unable to handle kernel NULL pointer dereference at 00000000
[ 1.540010] *pde = 00000000
[ 1.540010] Oops: 0002 [#1] PREEMPT
[ 1.540010] Modules linked in:
[ 1.540010] CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.17.0-rc5-mgm+ #57
[ 1.540010] Hardware name: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004
[ 1.540010] EIP: dma_direct_alloc+0x22f/0x260
[ 1.540010] EFLAGS: 00210246 CPU: 0
[ 1.540010] EAX: 00000000 EBX: 00000000 ECX: 00000200 EDX: 00000000
[ 1.540010] ESI: 014000c4 EDI: 00000000 EBP: f58d5cdc ESP: f58d5cb8
[ 1.540010] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 1.540010] CR0: 80050033 CR2: 00000000 CR3: 018f2000 CR4: 000006d0
[ 1.540010] Call Trace:
[ 1.540010] ? dma_direct_mapping_error+0x10/0x10
[ 1.540010] dmam_alloc_coherent+0xe8/0x160
[ 1.540010] ata_bmdma_port_start+0x42/0x70
[ 1.540010] piix_port_start+0x1a/0x20
[ 1.540010] ata_host_start.part.9+0xcb/0x1c0
[ 1.540010] ata_host_start+0x18/0x20
[ 1.540010] ata_pci_sff_activate_host+0x30/0x2b0
[ 1.540010] ? pci_write_config_byte+0x50/0x60
[ 1.540010] ? ata_bmdma_port_intr+0xe0/0xe0
[ 1.540010] piix_init_one+0x2e1/0x5e0
[ 1.540010] ? _raw_spin_unlock_irqrestore+0x5d/0x80
[ 1.540010] pci_device_probe+0x9a/0x130
[ 1.540010] ? devices_kset_move_last+0x67/0xe0
[ 1.540010] ? sysfs_create_link+0x25/0x50
[ 1.540010] driver_probe_device+0x319/0x4e0
[ 1.540010] ? _raw_spin_unlock+0x2c/0x50
[ 1.540010] ? pci_match_device+0xd2/0x100
[ 1.540010] __driver_attach+0xd9/0x100
[ 1.540010] ? klist_next+0x6b/0xe0
[ 1.540010] ? driver_probe_device+0x4e0/0x4e0
[ 1.540010] bus_for_each_dev+0x4b/0x90
[ 1.540010] driver_attach+0x1e/0x20
[ 1.540010] ? driver_probe_device+0x4e0/0x4e0
[ 1.540010] bus_add_driver+0x18f/0x280
[ 1.540010] driver_register+0x5d/0xf0
[ 1.540010] ? ata_sff_init+0x35/0x35
[ 1.540010] __pci_register_driver+0x50/0x60
[ 1.540010] piix_init+0x19/0x29
[ 1.540010] do_one_initcall+0x62/0x330
[ 1.540010] ? parse_args+0x1cd/0x410
[ 1.540010] kernel_init_freeable+0x214/0x31b
[ 1.540010] ? rest_init+0x1f0/0x1f0
[ 1.540010] kernel_init+0x10/0x110
[ 1.540010] ? schedule_tail_wrapper+0x9/0xc
[ 1.540010] ret_from_fork+0x2e/0x38
[ 1.540010] Code: 0f 84 02 ff ff ff eb d4 8d 74 26 00 f6 c2 01 75 21 f7 c7 02 00 00 00 75 24 f7 c7 04 00 00 00 75 29 89 d9 31 c0 c1 e9 02 83 e3 03 <f3> ab e9 c4 fe ff ff c6 02 00 8d 7a 01 8b 5d e0 eb d4 66 c7 07
[ 1.540010] EIP: dma_direct_alloc+0x22f/0x260 SS:ESP: 0068:f58d5cb8
[ 1.540010] CR2: 0000000000000000
[ 1.540010] ---[ end trace 37f4adc02e5109c8 ]---
[ 1.540010] BUG: sleeping function called from invalid context at ../include/linux/cgroup-defs.h:696
[ 1.540010] in_atomic(): 0, irqs_disabled(): 1, pid: 1, name: swapper
[ 1.540010] INFO: lockdep is turned off.
[ 1.540010] irq event stamp: 366166
[ 1.540010] hardirqs last enabled at (366165): [<c1595a6d>] _raw_spin_unlock_irqrestore+0x5d/0x80
[ 1.540010] hardirqs last disabled at (366166): [<c1596f27>] common_exception+0x61/0x82
[ 1.540010] softirqs last enabled at (363740): [<c1598749>] __do_softirq+0x389/0x425
[ 1.540010] softirqs last disabled at (363703): [<c101db7c>] call_on_stack+0x4c/0x60
[ 1.540010] CPU: 0 PID: 1 Comm: swapper Tainted: G D W 4.17.0-rc5-mgm+ #57
[ 1.540010] Hardware name: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004
[ 1.540010] Call Trace:
[ 1.540010] dump_stack+0x16/0x26
[ 1.540010] ___might_sleep+0x1f3/0x260
[ 1.540010] ? vprintk_emit+0x21c/0x420
[ 1.540010] __might_sleep+0x36/0x90
[ 1.540010] exit_signals+0x1f/0xf0
[ 1.540010] do_exit+0x79/0xb80
[ 1.540010] ? kernel_init_freeable+0x214/0x31b
[ 1.540010] ? rest_init+0x1f0/0x1f0
[ 1.540010] ? kernel_init+0x10/0x110
[ 1.540010] rewind_stack_do_exit+0x10/0x12
[ 1.891523] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[ 1.891523]
[ 1.894765] Kernel Offset: disabled
[ 1.894765] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[ 1.894765] ]---
[ 2.153352] random: fast init done
(gdb) list *(dma_direct_alloc+0x22f)
0x573fbf is in dma_direct_alloc (../lib/dma-direct.c:104).
94
95 if (!page)
96 return NULL;
97 ret = page_address(page);
98 if (force_dma_unencrypted()) {
99 set_memory_decrypted((unsigned long)ret, 1 << page_order);
100 *dma_handle = __phys_to_dma(dev, page_to_phys(page));
101 } else {
102 *dma_handle = phys_to_dma(dev, page_to_phys(page));
103 }
104 memset(ret, 0, size);
105 return ret;
106 }
--
Ville Syrjala
Intel
next prev parent reply other threads:[~2018-05-19 14:46 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-17 12:59 [PATCH] Revert "mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE" Ville Syrjala
2018-05-17 12:59 ` Ville Syrjala
2018-05-17 13:15 ` Vlastimil Babka
2018-05-17 13:15 ` Vlastimil Babka
2018-05-17 13:21 ` Michal Hocko
2018-05-17 13:21 ` Michal Hocko
2018-05-17 13:36 ` Ville Syrjälä
2018-05-17 13:36 ` Ville Syrjälä
2018-05-17 13:50 ` Vlastimil Babka
2018-05-17 13:50 ` Vlastimil Babka
2018-05-17 13:58 ` Ville Syrjälä
2018-05-17 13:58 ` Ville Syrjälä
2018-05-17 14:11 ` Ville Syrjälä
2018-05-17 14:11 ` Ville Syrjälä
2018-05-17 16:49 ` Michal Hocko
2018-05-17 16:49 ` Michal Hocko
2018-05-17 17:08 ` Michal Hocko
2018-05-17 17:08 ` Michal Hocko
2018-05-17 17:53 ` Laura Abbott
2018-05-17 17:53 ` Laura Abbott
2018-05-18 4:01 ` Joonsoo Kim
2018-05-18 4:01 ` Joonsoo Kim
2018-05-18 17:42 ` Laura Abbott
2018-05-18 17:42 ` Laura Abbott
2018-05-19 14:46 ` Ville Syrjälä [this message]
2018-05-19 14:46 ` Ville Syrjälä
2018-05-21 6:16 ` Joonsoo Kim
2018-05-21 6:16 ` Joonsoo Kim
2018-05-23 0:02 ` Andrew Morton
2018-05-23 0:09 ` Joonsoo Kim
2018-05-17 17:13 ` Ville Syrjälä
2018-05-17 17:13 ` Ville Syrjälä
2018-05-17 17:21 ` Michal Hocko
2018-05-17 17:21 ` Michal Hocko
2018-05-17 19:55 ` Ville Syrjälä
2018-05-17 19:55 ` Ville Syrjälä
2018-05-23 1:18 js1304
2018-05-23 1:18 ` js1304
2018-05-23 18:54 ` Laura Abbott
2018-05-23 18:54 ` Laura Abbott
2018-05-24 11:28 ` Michal Hocko
2018-05-24 11:28 ` Michal Hocko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180519144632.GE23723@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=hannes@cmpxchg.org \
--cc=iamjoonsoo.kim@lge.com \
--cc=labbott@redhat.com \
--cc=lauraa@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux@armlinux.org.uk \
--cc=m.szyprowski@samsung.com \
--cc=mgorman@techsingularity.net \
--cc=mhocko@kernel.org \
--cc=mina86@mina86.com \
--cc=minchan@kernel.org \
--cc=riel@redhat.com \
--cc=tony@atomide.com \
--cc=torvalds@linux-foundation.org \
--cc=vbabka@suse.cz \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.