[PATCH 4.14 000/165] 4.14.44-stable review

[PATCH 4.14 000/165] 4.14.44-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.44 release.
There are 165 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat May 26 09:35:46 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.44-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.44-rc1

James Hogan <jhogan@kernel.org>
    rtc: goldfish: Add missing MODULE_LICENSE

Alexandre Belloni <alexandre.belloni@bootlin.com>
    rtc: rp5c01: fix possible race condition

Colin Ian King <colin.king@canonical.com>
    rtc: tx4939: avoid unintended sign extension on a 24 bit shift

Alexandre Belloni <alexandre.belloni@bootlin.com>
    rtc: m41t80: fix race conditions

Alexandre Belloni <alexandre.belloni@bootlin.com>
    rtc: rk808: fix possible race condition

Alexandre Belloni <alexandre.belloni@bootlin.com>
    rtc: hctosys: Ensure system time doesn't overflow time_t

Bryan O'Donoghue <pure.logic@nexus-software.ie>
    rtc: snvs: Fix usage of snvs_rtc_enable

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    serial: altera: ensure port->regshift is honored consistently

Vignesh R <vigneshr@ti.com>
    serial: 8250: Don't service RX FIFO if interrupts are disabled

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: arc_uart: Fix out-of-bounds access through DT alias

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: fsl_lpuart: Fix out-of-bounds access through DT alias

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: imx: Fix out-of-bounds access through serial port index

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: mxs-auart: Fix out-of-bounds access through serial port index

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: samsung: Fix out-of-bounds access through serial port index

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: sh-sci: Fix out-of-bounds access through DT alias

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: xuartps: Fix out-of-bounds access through DT alias

Colin Ian King <colin.king@canonical.com>
    media: cx25821: prevent out-of-bounds read on array card

Hans Verkuil <hverkuil@xs4all.nl>
    media: vivid: fix incorrect capabilities for radio

Masami Hiramatsu <mhiramat@kernel.org>
    media: vb2: Fix videobuf2 to map correct area

Kieran Bingham <kieran.bingham@ideasonboard.com>
    media: i2c: adv748x: fix HDMI field heights

Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
    media: v4l: vsp1: Fix display stalls when requesting too many inputs

Brad Love <brad@nextdimension.cc>
    media: em28xx: Add Hauppauge SoloHD/DualHD bulk models

Brad Love <brad@nextdimension.cc>
    media: lgdt3306a: Fix a double kfree on i2c device remove

Arnd Bergmann <arnd@arndb.de>
    media: s3c-camif: fix out-of-bounds array access

Brad Love <brad@nextdimension.cc>
    media: cx23885: Set subdev host data to clk_freq pointer

Brad Love <brad@nextdimension.cc>
    media: cx23885: Override 888 ImpactVCBe crystal frequency

Akinobu Mita <akinobu.mita@gmail.com>
    media: ov5645: add missing of_node_put() in error path

Mauro Carvalho Chehab <mchehab@kernel.org>
    media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array

Mauro Carvalho Chehab <mchehab@kernel.org>
    media: dmxdev: fix error code for invalid ioctls

Andrzej Hajda <a.hajda@samsung.com>
    clk: samsung: exynos3250: Fix PLL rates

Andrzej Hajda <a.hajda@samsung.com>
    clk: samsung: exynos5250: Fix PLL rates

Andrzej Hajda <a.hajda@samsung.com>
    clk: samsung: exynos5433: Fix PLL rates

Andrzej Hajda <a.hajda@samsung.com>
    clk: samsung: exynos5260: Fix PLL rates

Andrzej Hajda <a.hajda@samsung.com>
    clk: samsung: exynos7: Fix PLL rates

Andrzej Hajda <a.hajda@samsung.com>
    clk: samsung: s3c2410: Fix PLL rates

Shawn Lin <shawn.lin@rock-chips.com>
    clk: rockchip: Prevent calculating mmc phase if clock rate is zero

Marcel Ziswiler <marcel@ziswiler.com>
    clk: tegra: Fix pll_u rate configuration

Arnd Bergmann <arnd@arndb.de>
    clk: hisilicon: mark wdt_mux_p[] as const

Shawn Lin <shawn.lin@rock-chips.com>
    clk: Don't show the incorrect clock phase

Shawn Lin <shawn.lin@rock-chips.com>
    clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228

Sylwester Nawrocki <s.nawrocki@samsung.com>
    ASoC: samsung: i2s: Ensure the RCLK rate is properly determined

Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
    ASoC: topology: create TLV data for dapm widgets

Sylwester Nawrocki <s.nawrocki@samsung.com>
    ASoC: samsung: odroid: Fix 32000 sample rate handling

Ezequiel Garcia <ezequiel@collabora.co.uk>
    ASoC: rockchip: rk3288-hdmi-analog: Select needed codecs

Peter Ujfalusi <peter.ujfalusi@ti.com>
    ASoC: hdmi-codec: Fix module unloading caused kernel crash

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix frequency of Release WQE CQEs

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix issue_lip if link is disabled

Wilfried Weissmann <wilfried.weissmann@gmx.at>
    scsi: mvsas: fix wrong endianness of sgpio api

Douglas Gilbert <dgilbert@interlog.com>
    scsi: core: Make SCSI Status CONDITION MET equivalent to GOOD

Dave Carroll <david.carroll@microsemi.com>
    scsi: aacraid: Insure command thread is not recursively stopped

Jianchao Wang <jianchao.w.wang@oracle.com>
    scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabled

Jeremy Cline <jeremy@jcline.org>
    scsi: sd: Keep disk read-only when re-reading partition

Hannes Reinecke <hare@suse.de>
    scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM

Manish Rangankar <manish.rangankar@cavium.com>
    scsi: qedi: Fix kernel crash during port toggle

Hannes Reinecke <hare@suse.de>
    scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()

Manish Rangankar <manish.rangankar@cavium.com>
    scsi: qla4xxx: skip error recovery in case of register disconnect.

Meelis Roos <mroos@linux.ee>
    scsi: aacraid: fix shutdown crash when init fails

Andrew Vasquez <andrew.vasquez@cavium.com>
    scsi: qedi: Fix truncation of CHAP name and secret

Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
    scsi: storvsc: Increase cmd_per_lun for higher speed devices

Bart Van Assche <bart.vanassche@wdc.com>
    scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: sym53c8xx_2: iterator underflow in sym_getsync()

Chad Dupuis <chad.dupuis@cavium.com>
    scsi: bnx2fc: Fix check in SCSI completion handler for timed out request

Sujit Reddy Thumma <sthumma@codeaurora.org>
    scsi: ufs: Enable quirk to ignore sending WRITE_SAME command

Quinn Tran <quinn.tran@cavium.com>
    scsi: qla2xxx: Fix memory corruption during hba reset test

Tomas Henzl <thenzl@redhat.com>
    scsi: mpt3sas: fix an out of bound write

Antoine Tenart <antoine.tenart@bootlin.com>
    crypto: inside-secure - fix the invalidation step during cra_exit

Peter Robinson <pbrobinson@gmail.com>
    crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ss

Antoine Tenart <antoine.tenart@bootlin.com>
    crypto: inside-secure - fix the extra cache computation

Antoine Tenart <antoine.tenart@bootlin.com>
    crypto: inside-secure - fix the cache_len computation

Antoine Tenart <antoine.tenart@bootlin.com>
    crypto: inside-secure - do not process request if no command was issued

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    crypto: ccp - don't disable interrupts while setting up debugfs

Antoine Tenart <antoine.tenart@bootlin.com>
    crypto: atmel-aes - fix the keys zeroing on errors

Antoine Tenart <antoine.tenart@bootlin.com>
    crypto: inside-secure - wait for the request to complete if in the backlog

NeilBrown <neilb@suse.com>
    staging: lustre: lmv: correctly iput lmo_root

Quytelda Kahja <quytelda@tamalin.org>
    staging: ks7010: Use constants from ieee80211_eid instead of literal ints.

Colin Ian King <colin.king@canonical.com>
    staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr

Ioana Radulescu <ruxandra.radulescu@nxp.com>
    staging: fsl-dpaa2/eth: Fix incorrect casts

NeilBrown <neilb@suse.com>
    staging: lustre: fix bug in osc_enter_cache_try

Kirill Marinushkin <k.marinushkin@gmail.com>
    staging: bcm2835-audio: Release resources on module_exit()

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Show what USB release number the xHC supports from protocol capablity

Larry Finger <Larry.Finger@lwfinger.net>
    Bluetooth: btusb: Add device ID for RTL8822BE

Brad Love <brad@nextdimension.cc>
    media: em28xx: USB bulk packet size fix

Brad Love <brad@nextdimension.cc>
    media: lgdt3306a: Fix module count mismatch on usb unplug

Chris Dickens <christopher.a.dickens@gmail.com>
    usb: gadget: composite: fix incorrect handling of OS desc requests

Wolfram Sang <wsa+renesas@sang-engineering.com>
    usb: gadget: udc: change comparison to bitshift when dealing with a mask

Ben Hutchings <ben@decadent.org.uk>
    usbip: Correct maximum value of CONFIG_USBIP_VHCI_HC_PORTS

Lars-Peter Clausen <lars@metafoo.de>
    usb: gadget: ffs: Execute copy_to_user() with USER_DS set

Lars-Peter Clausen <lars@metafoo.de>
    usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS

Minas Harutyunyan <hminas@synopsys.com>
    usb: dwc2: host: Fix transaction errors in host mode

Minas Harutyunyan <hminas@synopsys.com>
    usb: dwc2: hcd: Fix host channel halt flow

Grigor Tovmasyan <Grigor.Tovmasyan@synopsys.com>
    usb: dwc2: Fix interval type issue

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: zero usb device slot_id member when disabling and freeing a xhci slot

Felipe Balbi <felipe.balbi@linux.intel.com>
    usb: dwc3: Makefile: fix link error on randconfig

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: Add SoftReset PHY synchonization delay

Nobutaka Okabe <nob77413@gmail.com>
    ALSA: usb-audio: Add native DSD support for Luxman DA-06

Vicente Bergas <vicencb@gmail.com>
    Bluetooth: btusb: Add USB ID 7392:a611 for Edimax EW-7611ULB

Giuseppe Lippolis <giu.lippolis@gmail.com>
    net-usb: add qmi_wwan if on lte modem wistron neweb d18q1

Torsten Hilbrich <torsten.hilbrich@secunet.com>
    net/usb/qmi_wwan.c: Add USB id for lt4120 modem

Fredrik Noring <noring@nocrew.org>
    USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
    usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"

Leonard Crestez <leonard.crestez@nxp.com>
    ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name

Eric Dumazet <edumazet@google.com>
    net: usbnet: fix potential deadlock on 32bit hosts

Dominik Bozek <dominikx.bozek@intel.com>
    usb: cdc_acm: prevent race at write to acm while system resumes

Vardan Mikayelyan <mvardan@synopsys.com>
    usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()

Stefan Agner <stefan@agner.ch>
    usb: gadget: fsl_udc_core: fix ep valid checks

Manu Gautam <mgautam@codeaurora.org>
    usb: gadget: core: Fix use-after-free of usb_request

Roger Quadros <rogerq@ti.com>
    usb: dwc3: omap: don't miss events during suspend/resume

Brian Norris <briannorris@chromium.org>
    usb: dwc3: Undo PHY init if soft reset fails

John Keeping <john@metanate.com>
    usb: gadget: f_uac2: fix bFirstInterface in composite gadget

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    x86/kexec: Avoid double free_page() upon do_kexec_load() failure

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    hfsplus: stop workqueue when fill_super() failed

Johannes Berg <johannes.berg@intel.com>
    cfg80211: limit wiphy names to 128 bytes

Omar Sandoval <osandov@fb.com>
    loop: fix LOOP_GET_STATUS lock imbalance

Omar Sandoval <osandov@fb.com>
    loop: don't call into filesystem while holding lo_ctl_mutex

Jens Remus <jremus@linux.ibm.com>
    scsi: zfcp: fix infinite iteration on ERP ready list

Alexander Potapenko <glider@google.com>
    scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()

Jason Yan <yanaijie@huawei.com>
    scsi: libsas: defer ata device eh commands to libata

Martin Schwidefsky <schwidefsky@de.ibm.com>
    s390: use expoline thunks in the BPF JIT

Martin Schwidefsky <schwidefsky@de.ibm.com>
    s390: extend expoline to BC instructions

Martin Schwidefsky <schwidefsky@de.ibm.com>
    s390: move spectre sysfs attribute code

Martin Schwidefsky <schwidefsky@de.ibm.com>
    s390/kernel: use expoline for indirect branches

Martin Schwidefsky <schwidefsky@de.ibm.com>
    s390/ftrace: use expoline for indirect branches

Martin Schwidefsky <schwidefsky@de.ibm.com>
    s390/lib: use expoline for indirect branches

Martin Schwidefsky <schwidefsky@de.ibm.com>
    s390/crc32-vx: use expoline for indirect branches

Martin Schwidefsky <schwidefsky@de.ibm.com>
    s390: move expoline assembler macros to a header

Martin Schwidefsky <schwidefsky@de.ibm.com>
    s390: add assembler macros for CPU alternatives

Al Viro <viro@zeniv.linux.org.uk>
    ext2: fix a block leak

Arvind Yadav <arvind.yadav.cs@gmail.com>
    sparc: vio: use put_device() instead of kfree()

Mohammed Gamal <mgamal@redhat.com>
    hv_netvsc: Fix net device attach on older Windows hosts

Mohammed Gamal <mgamal@redhat.com>
    hv_netvsc: Ensure correct teardown message sequence order

Mohammed Gamal <mgamal@redhat.com>
    hv_netvsc: Split netvsc_revoke_buf() and netvsc_teardown_gpadl()

Mohammed Gamal <mgamal@redhat.com>
    hv_netvsc: Use Windows version instead of NVSP version on GPAD teardown

Stephen Hemminger <stephen@networkplumber.org>
    hv_netvsc: common detach logic

Stephen Hemminger <stephen@networkplumber.org>
    hv_netvsc: change GPAD teardown order on older versions

Stephen Hemminger <stephen@networkplumber.org>
    hv_netvsc: use RCU to fix concurrent rx and queue changes

Stephen Hemminger <stephen@networkplumber.org>
    hv_netvsc: disable NAPI before channel close

Stephen Hemminger <stephen@networkplumber.org>
    hv_netvsc: defer queue selection to VF

Stephen Hemminger <stephen@networkplumber.org>
    hv_netvsc: fix race in napi poll when rescheduling

Stephen Hemminger <stephen@networkplumber.org>
    hv_netvsc: cancel subchannel setup before halting device

Stephen Hemminger <stephen@networkplumber.org>
    hv_netvsc: fix error unwind handling if vmbus_open fails

Stephen Hemminger <stephen@networkplumber.org>
    hv_netvsc: only wake transmit queue if link is up

Stephen Hemminger <stephen@networkplumber.org>
    hv_netvsc: avoid retry on send during shutdown

Haiyang Zhang <haiyangz@microsoft.com>
    hv_netvsc: Use the num_online_cpus() for channel limit

Stephen Hemminger <stephen@networkplumber.org>
    hv_netvsc: empty current transmit aggregation if flow blocked

Vitaly Kuznetsov <vkuznets@redhat.com>
    hv_netvsc: preserve hw_features on mtu/channels/ringparam changes

Vitaly Kuznetsov <vkuznets@redhat.com>
    hv_netvsc: netvsc_teardown_gpadl() split

Haiyang Zhang <haiyangz@microsoft.com>
    hv_netvsc: Set tx_table to equal weight after subchannels open

Haiyang Zhang <haiyangz@microsoft.com>
    hv_netvsc: Add initialization of tx_table in netvsc_device_add()

Haiyang Zhang <haiyangz@microsoft.com>
    hv_netvsc: Rename tx_send_table to tx_table

Haiyang Zhang <haiyangz@microsoft.com>
    hv_netvsc: Rename ind_table to rx_table

Haiyang Zhang <haiyangz@microsoft.com>
    hv_netvsc: Fix the real number of queues of non-vRSS cases

hpreg@vmware.com <hpreg@vmware.com>
    vmxnet3: use DMA memory barriers where required

hpreg@vmware.com <hpreg@vmware.com>
    vmxnet3: set the DMA mask before the first DMA map operation

Eric Dumazet <edumazet@google.com>
    tcp: purge write queue in tcp_connect_init()

Eric Dumazet <edumazet@google.com>
    sock_diag: fix use-after-free read in __sk_free

Willem de Bruijn <willemb@google.com>
    packet: in packet_snd start writing at link layer allocation

Willem de Bruijn <willemb@google.com>
    net: test tailroom before appending to linear skb

Eric Biggers <ebiggers@google.com>
    net/smc: check for missing nlattrs in SMC_PNETID messages

Paolo Abeni <pabeni@redhat.com>
    net: sched: red: avoid hashing NULL child

Davide Caratti <dcaratti@redhat.com>
    net/sched: fix refcnt leak in the error path of tcf_vlan_init()

Tarick Bedeir <tarick@google.com>
    net/mlx4_core: Fix error handling in mlx4_init_port_info.

Amritha Nambiar <amritha.nambiar@intel.com>
    net: Fix a bug in removing queues from XPS map


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/imx7d-sdb.dts                    |   2 +-
 arch/s390/crypto/crc32be-vx.S                      |   5 +-
 arch/s390/crypto/crc32le-vx.S                      |   4 +-
 arch/s390/include/asm/alternative-asm.h            | 108 +++++++
 arch/s390/include/asm/nospec-insn.h                | 195 +++++++++++++
 arch/s390/kernel/Makefile                          |   1 +
 arch/s390/kernel/asm-offsets.c                     |   1 +
 arch/s390/kernel/base.S                            |  24 +-
 arch/s390/kernel/entry.S                           | 105 ++-----
 arch/s390/kernel/mcount.S                          |  14 +-
 arch/s390/kernel/nospec-branch.c                   |  43 ++-
 arch/s390/kernel/nospec-sysfs.c                    |  21 ++
 arch/s390/kernel/reipl.S                           |   7 +-
 arch/s390/kernel/swsusp.S                          |  10 +-
 arch/s390/lib/mem.S                                |  13 +-
 arch/s390/net/bpf_jit.S                            |  16 +-
 arch/s390/net/bpf_jit_comp.c                       |  63 ++++-
 arch/sparc/kernel/vio.c                            |   2 +-
 arch/x86/kernel/machine_kexec_32.c                 |   6 +-
 arch/x86/kernel/machine_kexec_64.c                 |   5 +-
 drivers/block/loop.c                               |  71 +++--
 drivers/bluetooth/btusb.c                          |   6 +
 drivers/clk/clk.c                                  |   3 +
 drivers/clk/hisilicon/crg-hi3516cv300.c            |   2 +-
 drivers/clk/rockchip/clk-mmc-phase.c               |  23 ++
 drivers/clk/rockchip/clk-rk3228.c                  |   2 +-
 drivers/clk/samsung/clk-exynos3250.c               |   4 +-
 drivers/clk/samsung/clk-exynos5250.c               |   8 +-
 drivers/clk/samsung/clk-exynos5260.c               |   2 +-
 drivers/clk/samsung/clk-exynos5433.c               |  12 +-
 drivers/clk/samsung/clk-exynos7.c                  |   2 +-
 drivers/clk/samsung/clk-s3c2410.c                  |  16 +-
 drivers/clk/tegra/clk-pll.c                        |   2 +
 drivers/crypto/atmel-aes.c                         |   2 +-
 drivers/crypto/ccp/ccp-debugfs.c                   |   7 +-
 drivers/crypto/inside-secure/safexcel.c            |   9 +
 drivers/crypto/inside-secure/safexcel_cipher.c     |   2 +-
 drivers/crypto/inside-secure/safexcel_hash.c       |   8 +-
 drivers/crypto/sunxi-ss/sun4i-ss-core.c            |   1 +
 drivers/media/dvb-core/dmxdev.c                    |   2 +-
 drivers/media/dvb-frontends/lgdt3306a.c            |  10 +-
 drivers/media/i2c/adv748x/adv748x-hdmi.c           |   3 +
 drivers/media/i2c/ov5645.c                         |   5 +-
 drivers/media/i2c/tvp5150.c                        |  88 +++---
 drivers/media/pci/cx23885/cx23885-cards.c          |   4 +
 drivers/media/pci/cx23885/cx23885-core.c           |  10 +
 drivers/media/pci/cx25821/cx25821-core.c           |   7 +-
 drivers/media/platform/s3c-camif/camif-capture.c   |   7 +-
 drivers/media/platform/vivid/vivid-ctrls.c         |   2 +
 drivers/media/platform/vsp1/vsp1_drm.c             |   9 +
 drivers/media/usb/em28xx/em28xx-cards.c            |  22 +-
 drivers/media/usb/em28xx/em28xx.h                  |   2 +-
 drivers/media/v4l2-core/videobuf2-vmalloc.c        |   2 +-
 drivers/message/fusion/mptctl.c                    |   2 +
 drivers/net/ethernet/mellanox/mlx4/main.c          |   4 +-
 drivers/net/hyperv/hyperv_net.h                    |  11 +-
 drivers/net/hyperv/netvsc.c                        | 203 ++++++++------
 drivers/net/hyperv/netvsc_drv.c                    | 310 ++++++++++++---------
 drivers/net/hyperv/rndis_filter.c                  | 210 +++++++-------
 drivers/net/usb/qmi_wwan.c                         |   4 +
 drivers/net/usb/usbnet.c                           |  10 +-
 drivers/net/vmxnet3/vmxnet3_drv.c                  |  72 +++--
 drivers/rtc/hctosys.c                              |   5 +
 drivers/rtc/rtc-goldfish.c                         |   2 +
 drivers/rtc/rtc-m41t80.c                           |  18 +-
 drivers/rtc/rtc-rk808.c                            |  14 +-
 drivers/rtc/rtc-rp5c01.c                           |  12 +-
 drivers/rtc/rtc-snvs.c                             |  15 +-
 drivers/rtc/rtc-tx4939.c                           |   6 +-
 drivers/s390/scsi/zfcp_dbf.c                       |  23 +-
 drivers/s390/scsi/zfcp_ext.h                       |   5 +-
 drivers/s390/scsi/zfcp_scsi.c                      |  14 +-
 drivers/scsi/aacraid/commsup.c                     |   4 +-
 drivers/scsi/aacraid/linit.c                       |   5 +-
 drivers/scsi/bnx2fc/bnx2fc_io.c                    |   1 +
 drivers/scsi/iscsi_tcp.c                           |   8 +
 drivers/scsi/libsas/sas_scsi_host.c                |  33 +--
 drivers/scsi/lpfc/lpfc_attr.c                      |   5 +
 drivers/scsi/lpfc/lpfc_hbadisc.c                   |   5 +-
 drivers/scsi/lpfc/lpfc_sli.c                       |   2 +
 drivers/scsi/mpt3sas/mpt3sas_base.c                |   5 +-
 drivers/scsi/mpt3sas/mpt3sas_scsih.c               |   2 +-
 drivers/scsi/mvsas/mv_94xx.c                       |  23 +-
 drivers/scsi/qedi/qedi_fw.c                        |   5 +
 drivers/scsi/qedi/qedi_main.c                      |  24 +-
 drivers/scsi/qla2xxx/qla_isr.c                     |   6 +-
 drivers/scsi/qla2xxx/qla_os.c                      |   2 +
 drivers/scsi/qla4xxx/ql4_def.h                     |   2 +
 drivers/scsi/qla4xxx/ql4_os.c                      |  46 +++
 drivers/scsi/scsi_lib.c                            |  13 +
 drivers/scsi/sd.c                                  |   3 +-
 drivers/scsi/sg.c                                  |   2 +-
 drivers/scsi/storvsc_drv.c                         |   2 +-
 drivers/scsi/sym53c8xx_2/sym_hipd.c                |   2 +-
 drivers/scsi/ufs/ufshcd.c                          |   2 +
 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c     |   6 +-
 drivers/staging/ks7010/ks_hostif.c                 |  31 +--
 drivers/staging/ks7010/ks_hostif.h                 |   1 +
 drivers/staging/lustre/lustre/include/obd.h        |   2 +-
 drivers/staging/lustre/lustre/lmv/lmv_obd.c        |   2 +-
 drivers/staging/lustre/lustre/osc/osc_cache.c      |   2 +-
 drivers/staging/rtl8192u/r8192U_core.c             |   2 +
 .../staging/vc04_services/bcm2835-audio/bcm2835.c  |  54 ++--
 drivers/tty/serial/8250/8250_port.c                |   3 +-
 drivers/tty/serial/altera_uart.c                   |  12 +-
 drivers/tty/serial/arc_uart.c                      |   5 +
 drivers/tty/serial/fsl_lpuart.c                    |   4 +
 drivers/tty/serial/imx.c                           |   6 +
 drivers/tty/serial/mxs-auart.c                     |   4 +
 drivers/tty/serial/samsung.c                       |   4 +
 drivers/tty/serial/sh-sci.c                        |   4 +
 drivers/tty/serial/xilinx_uartps.c                 |   2 +-
 drivers/usb/class/cdc-acm.c                        |   9 +-
 drivers/usb/dwc2/core.h                            |   2 +-
 drivers/usb/dwc2/gadget.c                          |  12 +-
 drivers/usb/dwc2/hcd.c                             |  32 ++-
 drivers/usb/dwc3/Makefile                          |   2 +-
 drivers/usb/dwc3/core.c                            |  16 +-
 drivers/usb/dwc3/core.h                            |   2 +
 drivers/usb/dwc3/dwc3-omap.c                       |  16 ++
 drivers/usb/gadget/composite.c                     |  40 ++-
 drivers/usb/gadget/function/f_fs.c                 |   6 +-
 drivers/usb/gadget/function/f_uac2.c               |   2 +
 drivers/usb/gadget/udc/core.c                      |   2 +-
 drivers/usb/gadget/udc/fsl_udc_core.c              |   4 +-
 drivers/usb/gadget/udc/goku_udc.h                  |   2 +-
 drivers/usb/host/ohci-hcd.c                        |   3 +-
 drivers/usb/host/xhci-mem.c                        |   2 +
 drivers/usb/host/xhci-plat.c                       |  11 +-
 drivers/usb/host/xhci.c                            |  14 +-
 drivers/usb/usbip/Kconfig                          |   2 +-
 fs/ext2/inode.c                                    |  10 -
 fs/hfsplus/super.c                                 |   1 +
 include/linux/u64_stats_sync.h                     |  22 ++
 include/linux/usb/composite.h                      |   3 +
 include/scsi/scsi.h                                |   2 +
 include/uapi/linux/nl80211.h                       |   2 +
 net/core/dev.c                                     |   2 +-
 net/core/sock.c                                    |   2 +-
 net/ipv4/ip_output.c                               |   3 +-
 net/ipv4/tcp_output.c                              |   7 +-
 net/ipv6/ip6_output.c                              |   3 +-
 net/packet/af_packet.c                             |   4 +-
 net/sched/act_vlan.c                               |   2 +
 net/sched/sch_red.c                                |   5 +-
 net/sched/sch_tbf.c                                |   5 +-
 net/smc/smc_pnet.c                                 |  71 ++---
 net/wireless/core.c                                |   3 +
 sound/soc/codecs/hdmi-codec.c                      |   7 +-
 sound/soc/rockchip/Kconfig                         |   3 +
 sound/soc/samsung/i2s.c                            |  13 +-
 sound/soc/samsung/odroid.c                         |  11 +-
 sound/soc/soc-topology.c                           |   3 +
 sound/usb/quirks.c                                 |  29 +-
 155 files changed, 1787 insertions(+), 895 deletions(-)

[PATCH 4.14 001/165] net: Fix a bug in removing queues from XPS map

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amritha Nambiar <amritha.nambiar@intel.com>

[ Upstream commit 6358d49ac23995fdfe157cc8747ab0f274d3954b ]

While removing queues from the XPS map, the individual CPU ID
alone was used to index the CPUs map, this should be changed to also
factor in the traffic class mapping for the CPU-to-queue lookup.

Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes")
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2058,7 +2058,7 @@ static bool remove_xps_queue_cpu(struct
 		int i, j;
 
 		for (i = count, j = offset; i--; j++) {
-			if (!remove_xps_queue(dev_maps, cpu, j))
+			if (!remove_xps_queue(dev_maps, tci, j))
 				break;
 		}
 

[PATCH 4.14 002/165] net/mlx4_core: Fix error handling in mlx4_init_port_info.

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tarick Bedeir <tarick@google.com>

[ Upstream commit 57f6f99fdad9984801cde05c1db68fe39b474a10 ]

Avoid exiting the function with a lingering sysfs file (if the first
call to device_create_file() fails while the second succeeds), and avoid
calling devlink_port_unregister() twice.

In other words, either mlx4_init_port_info() succeeds and returns zero, or
it fails, returns non-zero, and requires no cleanup.

Fixes: 096335b3f983 ("mlx4_core: Allow dynamic MTU configuration for IB ports")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx4/main.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -3007,6 +3007,7 @@ static int mlx4_init_port_info(struct ml
 		mlx4_err(dev, "Failed to create file for port %d\n", port);
 		devlink_port_unregister(&info->devlink_port);
 		info->port = -1;
+		return err;
 	}
 
 	sprintf(info->dev_mtu_name, "mlx4_port%d_mtu", port);
@@ -3028,9 +3029,10 @@ static int mlx4_init_port_info(struct ml
 				   &info->port_attr);
 		devlink_port_unregister(&info->devlink_port);
 		info->port = -1;
+		return err;
 	}
 
-	return err;
+	return 0;
 }
 
 static void mlx4_cleanup_port_info(struct mlx4_port_info *info)

[PATCH 4.14 003/165] net/sched: fix refcnt leak in the error path of tcf_vlan_init()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Davide Caratti <dcaratti@redhat.com>

[ Upstream commit 5a4931ae0193f8a4a97e8260fd0df1d705d83299 ]

Similarly to what was done with commit a52956dfc503 ("net sched actions:
fix refcnt leak in skbmod"), fix the error path of tcf_vlan_init() to avoid
refcnt leaks when wrong value of TCA_VLAN_PUSH_VLAN_PROTOCOL is given.

Fixes: 5026c9b1bafc ("net sched: vlan action fix late binding")
CC: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/act_vlan.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/sched/act_vlan.c
+++ b/net/sched/act_vlan.c
@@ -154,6 +154,8 @@ static int tcf_vlan_init(struct net *net
 			case htons(ETH_P_8021AD):
 				break;
 			default:
+				if (exists)
+					tcf_idr_release(*a, bind);
 				return -EPROTONOSUPPORT;
 			}
 		} else {

[PATCH 4.14 004/165] net: sched: red: avoid hashing NULL child

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 44a63b137f7b6e4c7bd6c9cc21615941cb36509d ]

Hangbin reported an Oops triggered by the syzkaller qdisc rules:

 kasan: GPF could be caused by NULL-ptr deref or user memory access
 general protection fault: 0000 [#1] SMP KASAN PTI
 Modules linked in: sch_red
 CPU: 0 PID: 28699 Comm: syz-executor5 Not tainted 4.17.0-rc4.kcov #1
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:qdisc_hash_add+0x26/0xa0
 RSP: 0018:ffff8800589cf470 EFLAGS: 00010203
 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff824ad971
 RDX: 0000000000000007 RSI: ffffc9000ce9f000 RDI: 000000000000003c
 RBP: 0000000000000001 R08: ffffed000b139ea2 R09: ffff8800589cf4f0
 R10: ffff8800589cf50f R11: ffffed000b139ea2 R12: ffff880054019fc0
 R13: ffff880054019fb4 R14: ffff88005c0af600 R15: ffff880054019fb0
 FS:  00007fa6edcb1700(0000) GS:ffff88005ce00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000020000740 CR3: 000000000fc16000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  red_change+0x2d2/0xed0 [sch_red]
  qdisc_create+0x57e/0xef0
  tc_modify_qdisc+0x47f/0x14e0
  rtnetlink_rcv_msg+0x6a8/0x920
  netlink_rcv_skb+0x2a2/0x3c0
  netlink_unicast+0x511/0x740
  netlink_sendmsg+0x825/0xc30
  sock_sendmsg+0xc5/0x100
  ___sys_sendmsg+0x778/0x8e0
  __sys_sendmsg+0xf5/0x1b0
  do_syscall_64+0xbd/0x3b0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x450869
 RSP: 002b:00007fa6edcb0c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007fa6edcb16b4 RCX: 0000000000450869
 RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000013
 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
 R13: 0000000000008778 R14: 0000000000702838 R15: 00007fa6edcb1700
 Code: e9 0b fe ff ff 0f 1f 44 00 00 55 53 48 89 fb 89 f5 e8 3f 07 f3 fe 48 8d 7b 3c 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 51
 RIP: qdisc_hash_add+0x26/0xa0 RSP: ffff8800589cf470

When a red qdisc is updated with a 0 limit, the child qdisc is left
unmodified, no additional scheduler is created in red_change(),
the 'child' local variable is rightfully NULL and must not add it
to the hash table.

This change addresses the above issue moving qdisc_hash_add() right
after the child qdisc creation. It additionally removes unneeded checks
for noop_qdisc.

Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: 49b499718fa1 ("net: sched: make default fifo qdiscs appear in the dump")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_red.c |    5 +++--
 net/sched/sch_tbf.c |    5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)

--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -191,10 +191,11 @@ static int red_change(struct Qdisc *sch,
 		child = fifo_create_dflt(sch, &bfifo_qdisc_ops, ctl->limit);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
-	}
 
-	if (child != &noop_qdisc)
+		/* child is fifo, no need to check for noop_qdisc */
 		qdisc_hash_add(child, true);
+	}
+
 	sch_tree_lock(sch);
 	q->flags = ctl->flags;
 	q->limit = ctl->limit;
--- a/net/sched/sch_tbf.c
+++ b/net/sched/sch_tbf.c
@@ -388,6 +388,9 @@ static int tbf_change(struct Qdisc *sch,
 			err = PTR_ERR(child);
 			goto done;
 		}
+
+		/* child is fifo, no need to check for noop_qdisc */
+		qdisc_hash_add(child, true);
 	}
 
 	sch_tree_lock(sch);
@@ -396,8 +399,6 @@ static int tbf_change(struct Qdisc *sch,
 					  q->qdisc->qstats.backlog);
 		qdisc_destroy(q->qdisc);
 		q->qdisc = child;
-		if (child != &noop_qdisc)
-			qdisc_hash_add(child, true);
 	}
 	q->limit = qopt->limit;
 	if (tb[TCA_TBF_PBURST])

[PATCH 4.14 005/165] net/smc: check for missing nlattrs in SMC_PNETID messages

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

[ Upstream commit d49baa7e12ee70c0a7b821d088a770c94c02e494 ]

It's possible to crash the kernel in several different ways by sending
messages to the SMC_PNETID generic netlink family that are missing the
expected attributes:

- Missing SMC_PNETID_NAME => null pointer dereference when comparing
  names.
- Missing SMC_PNETID_ETHNAME => null pointer dereference accessing
  smc_pnetentry::ndev.
- Missing SMC_PNETID_IBNAME => null pointer dereference accessing
  smc_pnetentry::smcibdev.
- Missing SMC_PNETID_IBPORT => out of bounds array access to
  smc_ib_device::pattr[-1].

Fix it by validating that all expected attributes are present and that
SMC_PNETID_IBPORT is nonzero.

Reported-by: syzbot+5cd61039dc9b8bfa6e47@syzkaller.appspotmail.com
Fixes: 6812baabf24d ("smc: establish pnet table management")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/smc/smc_pnet.c |   71 +++++++++++++++++++++++++++++------------------------
 1 file changed, 40 insertions(+), 31 deletions(-)

--- a/net/smc/smc_pnet.c
+++ b/net/smc/smc_pnet.c
@@ -245,40 +245,45 @@ out:
 static int smc_pnet_fill_entry(struct net *net, struct smc_pnetentry *pnetelem,
 			       struct nlattr *tb[])
 {
-	char *string, *ibname = NULL;
-	int rc = 0;
+	char *string, *ibname;
+	int rc;
 
 	memset(pnetelem, 0, sizeof(*pnetelem));
 	INIT_LIST_HEAD(&pnetelem->list);
-	if (tb[SMC_PNETID_NAME]) {
-		string = (char *)nla_data(tb[SMC_PNETID_NAME]);
-		if (!smc_pnetid_valid(string, pnetelem->pnet_name)) {
-			rc = -EINVAL;
-			goto error;
-		}
-	}
-	if (tb[SMC_PNETID_ETHNAME]) {
-		string = (char *)nla_data(tb[SMC_PNETID_ETHNAME]);
-		pnetelem->ndev = dev_get_by_name(net, string);
-		if (!pnetelem->ndev)
-			return -ENOENT;
-	}
-	if (tb[SMC_PNETID_IBNAME]) {
-		ibname = (char *)nla_data(tb[SMC_PNETID_IBNAME]);
-		ibname = strim(ibname);
-		pnetelem->smcibdev = smc_pnet_find_ib(ibname);
-		if (!pnetelem->smcibdev) {
-			rc = -ENOENT;
-			goto error;
-		}
-	}
-	if (tb[SMC_PNETID_IBPORT]) {
-		pnetelem->ib_port = nla_get_u8(tb[SMC_PNETID_IBPORT]);
-		if (pnetelem->ib_port > SMC_MAX_PORTS) {
-			rc = -EINVAL;
-			goto error;
-		}
-	}
+
+	rc = -EINVAL;
+	if (!tb[SMC_PNETID_NAME])
+		goto error;
+	string = (char *)nla_data(tb[SMC_PNETID_NAME]);
+	if (!smc_pnetid_valid(string, pnetelem->pnet_name))
+		goto error;
+
+	rc = -EINVAL;
+	if (!tb[SMC_PNETID_ETHNAME])
+		goto error;
+	rc = -ENOENT;
+	string = (char *)nla_data(tb[SMC_PNETID_ETHNAME]);
+	pnetelem->ndev = dev_get_by_name(net, string);
+	if (!pnetelem->ndev)
+		goto error;
+
+	rc = -EINVAL;
+	if (!tb[SMC_PNETID_IBNAME])
+		goto error;
+	rc = -ENOENT;
+	ibname = (char *)nla_data(tb[SMC_PNETID_IBNAME]);
+	ibname = strim(ibname);
+	pnetelem->smcibdev = smc_pnet_find_ib(ibname);
+	if (!pnetelem->smcibdev)
+		goto error;
+
+	rc = -EINVAL;
+	if (!tb[SMC_PNETID_IBPORT])
+		goto error;
+	pnetelem->ib_port = nla_get_u8(tb[SMC_PNETID_IBPORT]);
+	if (pnetelem->ib_port < 1 || pnetelem->ib_port > SMC_MAX_PORTS)
+		goto error;
+
 	return 0;
 
 error:
@@ -307,6 +312,8 @@ static int smc_pnet_get(struct sk_buff *
 	void *hdr;
 	int rc;
 
+	if (!info->attrs[SMC_PNETID_NAME])
+		return -EINVAL;
 	pnetelem = smc_pnet_find_pnetid(
 				(char *)nla_data(info->attrs[SMC_PNETID_NAME]));
 	if (!pnetelem)
@@ -359,6 +366,8 @@ static int smc_pnet_add(struct sk_buff *
 
 static int smc_pnet_del(struct sk_buff *skb, struct genl_info *info)
 {
+	if (!info->attrs[SMC_PNETID_NAME])
+		return -EINVAL;
 	return smc_pnet_remove_by_pnetid(
 				(char *)nla_data(info->attrs[SMC_PNETID_NAME]));
 }

[PATCH 4.14 006/165] net: test tailroom before appending to linear skb

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Willem de Bruijn <willemb@google.com>

[ Upstream commit 113f99c3358564a0647d444c2ae34e8b1abfd5b9 ]

Device features may change during transmission. In particular with
corking, a device may toggle scatter-gather in between allocating
and writing to an skb.

Do not unconditionally assume that !NETIF_F_SG at write time implies
that the same held at alloc time and thus the skb has sufficient
tailroom.

This issue predates git history.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_output.c  |    3 ++-
 net/ipv6/ip6_output.c |    3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1040,7 +1040,8 @@ alloc_new_skb:
 		if (copy > length)
 			copy = length;
 
-		if (!(rt->dst.dev->features&NETIF_F_SG)) {
+		if (!(rt->dst.dev->features&NETIF_F_SG) &&
+		    skb_tailroom(skb) >= copy) {
 			unsigned int off;
 
 			off = skb->len;
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1488,7 +1488,8 @@ alloc_new_skb:
 		if (copy > length)
 			copy = length;
 
-		if (!(rt->dst.dev->features&NETIF_F_SG)) {
+		if (!(rt->dst.dev->features&NETIF_F_SG) &&
+		    skb_tailroom(skb) >= copy) {
 			unsigned int off;
 
 			off = skb->len;

[PATCH 4.14 007/165] packet: in packet_snd start writing at link layer allocation

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Willem de Bruijn <willemb@google.com>

[ Upstream commit b84bbaf7a6c8cca24f8acf25a2c8e46913a947ba ]

Packet sockets allow construction of packets shorter than
dev->hard_header_len to accommodate protocols with variable length
link layer headers. These packets are padded to dev->hard_header_len,
because some device drivers interpret that as a minimum packet size.

packet_snd reserves dev->hard_header_len bytes on allocation.
SOCK_DGRAM sockets call skb_push in dev_hard_header() to ensure that
link layer headers are stored in the reserved range. SOCK_RAW sockets
do the same in tpacket_snd, but not in packet_snd.

Syzbot was able to send a zero byte packet to a device with massive
116B link layer header, causing padding to cross over into skb_shinfo.
Fix this by writing from the start of the llheader reserved range also
in the case of packet_snd/SOCK_RAW.

Update skb_set_network_header to the new offset. This also corrects
it for SOCK_DGRAM, where it incorrectly double counted reserve due to
the skb_push in dev_hard_header.

Fixes: 9ed988cd5915 ("packet: validate variable length ll headers")
Reported-by: syzbot+71d74a5406d02057d559@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2912,13 +2912,15 @@ static int packet_snd(struct socket *soc
 	if (skb == NULL)
 		goto out_unlock;
 
-	skb_set_network_header(skb, reserve);
+	skb_reset_network_header(skb);
 
 	err = -EINVAL;
 	if (sock->type == SOCK_DGRAM) {
 		offset = dev_hard_header(skb, dev, ntohs(proto), addr, NULL, len);
 		if (unlikely(offset < 0))
 			goto out_free;
+	} else if (reserve) {
+		skb_push(skb, reserve);
 	}
 
 	/* Returns -EFAULT on error */

[PATCH 4.14 008/165] sock_diag: fix use-after-free read in __sk_free

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 9709020c86f6bf8439ca3effc58cfca49a5de192 ]

We must not call sock_diag_has_destroy_listeners(sk) on a socket
that has no reference on net structure.

BUG: KASAN: use-after-free in sock_diag_has_destroy_listeners include/linux/sock_diag.h:75 [inline]
BUG: KASAN: use-after-free in __sk_free+0x329/0x340 net/core/sock.c:1609
Read of size 8 at addr ffff88018a02e3a0 by task swapper/1/0

CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.17.0-rc5+ #54
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
 sock_diag_has_destroy_listeners include/linux/sock_diag.h:75 [inline]
 __sk_free+0x329/0x340 net/core/sock.c:1609
 sk_free+0x42/0x50 net/core/sock.c:1623
 sock_put include/net/sock.h:1664 [inline]
 reqsk_free include/net/request_sock.h:116 [inline]
 reqsk_put include/net/request_sock.h:124 [inline]
 inet_csk_reqsk_queue_drop_and_put net/ipv4/inet_connection_sock.c:672 [inline]
 reqsk_timer_handler+0xe27/0x10e0 net/ipv4/inet_connection_sock.c:739
 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1d1/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:525 [inline]
 smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863
 </IRQ>
RIP: 0010:native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:54
RSP: 0018:ffff8801d9ae7c38 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
RAX: dffffc0000000000 RBX: 1ffff1003b35cf8a RCX: 0000000000000000
RDX: 1ffffffff11a30d0 RSI: 0000000000000001 RDI: ffffffff88d18680
RBP: ffff8801d9ae7c38 R08: ffffed003b5e46c3 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
R13: ffff8801d9ae7cf0 R14: ffffffff897bef20 R15: 0000000000000000
 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
 default_idle+0xc2/0x440 arch/x86/kernel/process.c:354
 arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:345
 default_idle_call+0x6d/0x90 kernel/sched/idle.c:93
 cpuidle_idle_call kernel/sched/idle.c:153 [inline]
 do_idle+0x395/0x560 kernel/sched/idle.c:262
 cpu_startup_entry+0x104/0x120 kernel/sched/idle.c:368
 start_secondary+0x426/0x5b0 arch/x86/kernel/smpboot.c:269
 secondary_startup_64+0xa5/0xb0 arch/x86/kernel/head_64.S:242

Allocated by task 4557:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554
 kmem_cache_zalloc include/linux/slab.h:691 [inline]
 net_alloc net/core/net_namespace.c:383 [inline]
 copy_net_ns+0x159/0x4c0 net/core/net_namespace.c:423
 create_new_namespaces+0x69d/0x8f0 kernel/nsproxy.c:107
 unshare_nsproxy_namespaces+0xc3/0x1f0 kernel/nsproxy.c:206
 ksys_unshare+0x708/0xf90 kernel/fork.c:2408
 __do_sys_unshare kernel/fork.c:2476 [inline]
 __se_sys_unshare kernel/fork.c:2474 [inline]
 __x64_sys_unshare+0x31/0x40 kernel/fork.c:2474
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 69:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kmem_cache_free+0x86/0x2d0 mm/slab.c:3756
 net_free net/core/net_namespace.c:399 [inline]
 net_drop_ns.part.14+0x11a/0x130 net/core/net_namespace.c:406
 net_drop_ns net/core/net_namespace.c:405 [inline]
 cleanup_net+0x6a1/0xb20 net/core/net_namespace.c:541
 process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145
 worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279
 kthread+0x345/0x410 kernel/kthread.c:240
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the object at ffff88018a02c140
 which belongs to the cache net_namespace of size 8832
The buggy address is located 8800 bytes inside of
 8832-byte region [ffff88018a02c140, ffff88018a02e3c0)
The buggy address belongs to the page:
page:ffffea0006280b00 count:1 mapcount:0 mapping:ffff88018a02c140 index:0x0 compound_mapcount: 0
flags: 0x2fffc0000008100(slab|head)
raw: 02fffc0000008100 ffff88018a02c140 0000000000000000 0000000100000001
raw: ffffea00062a1320 ffffea0006268020 ffff8801d9bdde40 0000000000000000
page dumped because: kasan: bad access detected

Fixes: b922622ec6ef ("sock_diag: don't broadcast kernel sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Craig Gallek <kraig@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/sock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1595,7 +1595,7 @@ void sk_destruct(struct sock *sk)
 
 static void __sk_free(struct sock *sk)
 {
-	if (unlikely(sock_diag_has_destroy_listeners(sk) && sk->sk_net_refcnt))
+	if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk)))
 		sock_diag_broadcast_destroy(sk);
 	else
 		sk_destruct(sk);

[PATCH 4.14 009/165] tcp: purge write queue in tcp_connect_init()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 7f582b248d0a86bae5788c548d7bb5bca6f7691a ]

syzkaller found a reliable way to crash the host, hitting a BUG()
in __tcp_retransmit_skb()

Malicous MSG_FASTOPEN is the root cause. We need to purge write queue
in tcp_connect_init() at the point we init snd_una/write_seq.

This patch also replaces the BUG() by a less intrusive WARN_ON_ONCE()

kernel BUG at net/ipv4/tcp_output.c:2837!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 5276 Comm: syz-executor0 Not tainted 4.17.0-rc3+ #51
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__tcp_retransmit_skb+0x2992/0x2eb0 net/ipv4/tcp_output.c:2837
RSP: 0000:ffff8801dae06ff8 EFLAGS: 00010206
RAX: ffff8801b9fe61c0 RBX: 00000000ffc18a16 RCX: ffffffff864e1a49
RDX: 0000000000000100 RSI: ffffffff864e2e12 RDI: 0000000000000005
RBP: ffff8801dae073a0 R08: ffff8801b9fe61c0 R09: ffffed0039c40dd2
R10: ffffed0039c40dd2 R11: ffff8801ce206e93 R12: 00000000421eeaad
R13: ffff8801ce206d4e R14: ffff8801ce206cc0 R15: ffff8801cd4f4a80
FS:  0000000000000000(0000) GS:ffff8801dae00000(0063) knlGS:00000000096bc900
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000020000000 CR3: 00000001c47b6000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 tcp_retransmit_skb+0x2e/0x250 net/ipv4/tcp_output.c:2923
 tcp_retransmit_timer+0xc50/0x3060 net/ipv4/tcp_timer.c:488
 tcp_write_timer_handler+0x339/0x960 net/ipv4/tcp_timer.c:573
 tcp_write_timer+0x111/0x1d0 net/ipv4/tcp_timer.c:593
 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1d1/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:525 [inline]
 smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863

Fixes: cf60af03ca4e ("net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_output.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2814,8 +2814,10 @@ int __tcp_retransmit_skb(struct sock *sk
 		return -EBUSY;
 
 	if (before(TCP_SKB_CB(skb)->seq, tp->snd_una)) {
-		if (before(TCP_SKB_CB(skb)->end_seq, tp->snd_una))
-			BUG();
+		if (unlikely(before(TCP_SKB_CB(skb)->end_seq, tp->snd_una))) {
+			WARN_ON_ONCE(1);
+			return -EINVAL;
+		}
 		if (tcp_trim_head(sk, skb, tp->snd_una - TCP_SKB_CB(skb)->seq))
 			return -ENOMEM;
 	}
@@ -3312,6 +3314,7 @@ static void tcp_connect_init(struct sock
 	sock_reset_flag(sk, SOCK_DONE);
 	tp->snd_wnd = 0;
 	tcp_init_wl(tp, 0);
+	tcp_write_queue_purge(sk);
 	tp->snd_una = tp->write_seq;
 	tp->snd_sml = tp->write_seq;
 	tp->snd_up = tp->write_seq;

[PATCH 4.14 010/165] vmxnet3: set the DMA mask before the first DMA map operation

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "hpreg@vmware.com" <hpreg@vmware.com>

[ Upstream commit 61aeecea40afb2b89933e27cd4adb10fc2e75cfd ]

The DMA mask must be set before, not after, the first DMA map operation, or
the first DMA map operation could in theory fail on some systems.

Fixes: b0eb57cb97e78 ("VMXNET3: Add support for virtual IOMMU")
Signed-off-by: Regis Duchesne <hpreg@vmware.com>
Acked-by: Ronak Doshi <doshir@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/vmxnet3/vmxnet3_drv.c |   50 +++++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 25 deletions(-)

--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2675,7 +2675,7 @@ vmxnet3_set_mac_addr(struct net_device *
 /* ==================== initialization and cleanup routines ============ */
 
 static int
-vmxnet3_alloc_pci_resources(struct vmxnet3_adapter *adapter, bool *dma64)
+vmxnet3_alloc_pci_resources(struct vmxnet3_adapter *adapter)
 {
 	int err;
 	unsigned long mmio_start, mmio_len;
@@ -2687,30 +2687,12 @@ vmxnet3_alloc_pci_resources(struct vmxne
 		return err;
 	}
 
-	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
-		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
-			dev_err(&pdev->dev,
-				"pci_set_consistent_dma_mask failed\n");
-			err = -EIO;
-			goto err_set_mask;
-		}
-		*dma64 = true;
-	} else {
-		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
-			dev_err(&pdev->dev,
-				"pci_set_dma_mask failed\n");
-			err = -EIO;
-			goto err_set_mask;
-		}
-		*dma64 = false;
-	}
-
 	err = pci_request_selected_regions(pdev, (1 << 2) - 1,
 					   vmxnet3_driver_name);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Failed to request region for adapter: error %d\n", err);
-		goto err_set_mask;
+		goto err_enable_device;
 	}
 
 	pci_set_master(pdev);
@@ -2738,7 +2720,7 @@ err_bar1:
 	iounmap(adapter->hw_addr0);
 err_ioremap:
 	pci_release_selected_regions(pdev, (1 << 2) - 1);
-err_set_mask:
+err_enable_device:
 	pci_disable_device(pdev);
 	return err;
 }
@@ -3243,7 +3225,7 @@ vmxnet3_probe_device(struct pci_dev *pde
 #endif
 	};
 	int err;
-	bool dma64 = false; /* stupid gcc */
+	bool dma64;
 	u32 ver;
 	struct net_device *netdev;
 	struct vmxnet3_adapter *adapter;
@@ -3289,6 +3271,24 @@ vmxnet3_probe_device(struct pci_dev *pde
 	adapter->rx_ring_size = VMXNET3_DEF_RX_RING_SIZE;
 	adapter->rx_ring2_size = VMXNET3_DEF_RX_RING2_SIZE;
 
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
+		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
+			dev_err(&pdev->dev,
+				"pci_set_consistent_dma_mask failed\n");
+			err = -EIO;
+			goto err_set_mask;
+		}
+		dma64 = true;
+	} else {
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
+			dev_err(&pdev->dev,
+				"pci_set_dma_mask failed\n");
+			err = -EIO;
+			goto err_set_mask;
+		}
+		dma64 = false;
+	}
+
 	spin_lock_init(&adapter->cmd_lock);
 	adapter->adapter_pa = dma_map_single(&adapter->pdev->dev, adapter,
 					     sizeof(struct vmxnet3_adapter),
@@ -3296,7 +3296,7 @@ vmxnet3_probe_device(struct pci_dev *pde
 	if (dma_mapping_error(&adapter->pdev->dev, adapter->adapter_pa)) {
 		dev_err(&pdev->dev, "Failed to map dma\n");
 		err = -EFAULT;
-		goto err_dma_map;
+		goto err_set_mask;
 	}
 	adapter->shared = dma_alloc_coherent(
 				&adapter->pdev->dev,
@@ -3347,7 +3347,7 @@ vmxnet3_probe_device(struct pci_dev *pde
 	}
 #endif /* VMXNET3_RSS */
 
-	err = vmxnet3_alloc_pci_resources(adapter, &dma64);
+	err = vmxnet3_alloc_pci_resources(adapter);
 	if (err < 0)
 		goto err_alloc_pci;
 
@@ -3493,7 +3493,7 @@ err_alloc_queue_desc:
 err_alloc_shared:
 	dma_unmap_single(&adapter->pdev->dev, adapter->adapter_pa,
 			 sizeof(struct vmxnet3_adapter), PCI_DMA_TODEVICE);
-err_dma_map:
+err_set_mask:
 	free_netdev(netdev);
 	return err;
 }

[PATCH 4.14 011/165] vmxnet3: use DMA memory barriers where required

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "hpreg@vmware.com" <hpreg@vmware.com>

[ Upstream commit f3002c1374fb2367c9d8dbb28852791ef90d2bac ]

The gen bits must be read first from (resp. written last to) DMA memory.
The proper way to enforce this on Linux is to call dma_rmb() (resp.
dma_wmb()).

Signed-off-by: Regis Duchesne <hpreg@vmware.com>
Acked-by: Ronak Doshi <doshir@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/vmxnet3/vmxnet3_drv.c |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -369,6 +369,11 @@ vmxnet3_tq_tx_complete(struct vmxnet3_tx
 
 	gdesc = tq->comp_ring.base + tq->comp_ring.next2proc;
 	while (VMXNET3_TCD_GET_GEN(&gdesc->tcd) == tq->comp_ring.gen) {
+		/* Prevent any &gdesc->tcd field from being (speculatively)
+		 * read before (&gdesc->tcd)->gen is read.
+		 */
+		dma_rmb();
+
 		completed += vmxnet3_unmap_pkt(VMXNET3_TCD_GET_TXIDX(
 					       &gdesc->tcd), tq, adapter->pdev,
 					       adapter);
@@ -1099,6 +1104,11 @@ vmxnet3_tq_xmit(struct sk_buff *skb, str
 		gdesc->txd.tci = skb_vlan_tag_get(skb);
 	}
 
+	/* Ensure that the write to (&gdesc->txd)->gen will be observed after
+	 * all other writes to &gdesc->txd.
+	 */
+	dma_wmb();
+
 	/* finally flips the GEN bit of the SOP desc. */
 	gdesc->dword[2] = cpu_to_le32(le32_to_cpu(gdesc->dword[2]) ^
 						  VMXNET3_TXD_GEN);
@@ -1286,6 +1296,12 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx
 			 */
 			break;
 		}
+
+		/* Prevent any rcd field from being (speculatively) read before
+		 * rcd->gen is read.
+		 */
+		dma_rmb();
+
 		BUG_ON(rcd->rqID != rq->qid && rcd->rqID != rq->qid2 &&
 		       rcd->rqID != rq->dataRingQid);
 		idx = rcd->rxdIdx;
@@ -1515,6 +1531,12 @@ rcd_done:
 		ring->next2comp = idx;
 		num_to_alloc = vmxnet3_cmd_ring_desc_avail(ring);
 		ring = rq->rx_ring + ring_idx;
+
+		/* Ensure that the writes to rxd->gen bits will be observed
+		 * after all other writes to rxd objects.
+		 */
+		dma_wmb();
+
 		while (num_to_alloc) {
 			vmxnet3_getRxDesc(rxd, &ring->base[ring->next2fill].rxd,
 					  &rxCmdDesc);

[PATCH 4.14 012/165] hv_netvsc: Fix the real number of queues of non-vRSS cases

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Commit 6450f8f269a9271985e4a8c13920b7e4cf21c0f3 upstream. ]

For older hosts without multi-channel (vRSS) support, and some error
cases, we still need to set the real number of queues to one.
This patch adds this missing setting.

Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc_drv.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -1932,6 +1932,12 @@ static int netvsc_probe(struct hv_device
 	/* We always need headroom for rndis header */
 	net->needed_headroom = RNDIS_AND_PPI_SIZE;
 
+	/* Initialize the number of queues to be 1, we may change it if more
+	 * channels are offered later.
+	 */
+	netif_set_real_num_tx_queues(net, 1);
+	netif_set_real_num_rx_queues(net, 1);
+
 	/* Notify the netvsc driver of the new device */
 	memset(&device_info, 0, sizeof(device_info));
 	device_info.ring_size = ring_size;

[PATCH 4.14 013/165] hv_netvsc: Rename ind_table to rx_table

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Commit 47371300dfc269dd8d150e5b872bdbbda98ba809 upstream. ]

Rename this variable because it is the Receive indirection
table.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/hyperv_net.h   |    2 +-
 drivers/net/hyperv/netvsc_drv.c   |    4 ++--
 drivers/net/hyperv/rndis_filter.c |    6 +++---
 3 files changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -179,7 +179,7 @@ struct rndis_device {
 
 	u8 hw_mac_adr[ETH_ALEN];
 	u8 rss_key[NETVSC_HASH_KEYLEN];
-	u16 ind_table[ITAB_NUM];
+	u16 rx_table[ITAB_NUM];
 };
 
 
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -1378,7 +1378,7 @@ static int netvsc_get_rxfh(struct net_de
 	rndis_dev = ndev->extension;
 	if (indir) {
 		for (i = 0; i < ITAB_NUM; i++)
-			indir[i] = rndis_dev->ind_table[i];
+			indir[i] = rndis_dev->rx_table[i];
 	}
 
 	if (key)
@@ -1408,7 +1408,7 @@ static int netvsc_set_rxfh(struct net_de
 				return -EINVAL;
 
 		for (i = 0; i < ITAB_NUM; i++)
-			rndis_dev->ind_table[i] = indir[i];
+			rndis_dev->rx_table[i] = indir[i];
 	}
 
 	if (!key) {
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -759,7 +759,7 @@ int rndis_filter_set_rss_param(struct rn
 	/* Set indirection table entries */
 	itab = (u32 *)(rssp + 1);
 	for (i = 0; i < ITAB_NUM; i++)
-		itab[i] = rdev->ind_table[i];
+		itab[i] = rdev->rx_table[i];
 
 	/* Set hask key values */
 	keyp = (u8 *)((unsigned long)rssp + rssp->kashkey_offset);
@@ -1284,8 +1284,8 @@ struct netvsc_device *rndis_filter_devic
 	net_device->num_chn = min(net_device->max_chn, device_info->num_chn);
 
 	for (i = 0; i < ITAB_NUM; i++)
-		rndis_device->ind_table[i] = ethtool_rxfh_indir_default(i,
-							net_device->num_chn);
+		rndis_device->rx_table[i] = ethtool_rxfh_indir_default(
+						i, net_device->num_chn);
 
 	atomic_set(&net_device->open_chn, 1);
 	vmbus_set_sc_create_callback(dev->channel, netvsc_sc_open);

[PATCH 4.14 014/165] hv_netvsc: Rename tx_send_table to tx_table

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Commit 39e91cfbf6f5fb26ba64cc2e8874372baf1671e7 upstream. ]

Simplify the variable name: tx_send_table

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/hyperv_net.h |    2 +-
 drivers/net/hyperv/netvsc.c     |    2 +-
 drivers/net/hyperv/netvsc_drv.c |    4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -734,7 +734,7 @@ struct net_device_context {
 
 	u32 tx_checksum_mask;
 
-	u32 tx_send_table[VRSS_SEND_TAB_SIZE];
+	u32 tx_table[VRSS_SEND_TAB_SIZE];
 
 	/* Ethtool settings */
 	bool udp4_l4_hash;
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -1107,7 +1107,7 @@ static void netvsc_send_table(struct hv_
 		      nvmsg->msg.v5_msg.send_table.offset);
 
 	for (i = 0; i < count; i++)
-		net_device_ctx->tx_send_table[i] = tab[i];
+		net_device_ctx->tx_table[i] = tab[i];
 }
 
 static void netvsc_send_vf(struct net_device_context *net_device_ctx,
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -234,8 +234,8 @@ static inline int netvsc_get_tx_queue(st
 	struct sock *sk = skb->sk;
 	int q_idx;
 
-	q_idx = ndc->tx_send_table[netvsc_get_hash(skb, ndc) &
-				   (VRSS_SEND_TAB_SIZE - 1)];
+	q_idx = ndc->tx_table[netvsc_get_hash(skb, ndc) &
+			      (VRSS_SEND_TAB_SIZE - 1)];
 
 	/* If queue index changed record the new value */
 	if (q_idx != old_idx &&

[PATCH 4.14 015/165] hv_netvsc: Add initialization of tx_table in netvsc_device_add()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Commit 6b0cbe315868d613123cf387052ccda5f09d49ea upstream. ]

tx_table is part of the private data of kernel net_device. It is only
zero-ed out when allocating net_device.

We may recreate netvsc_device w/o recreating net_device, so the private
netdev data, including tx_table, are not zeroed. It may contain channel
numbers for the older netvsc_device.

This patch adds initialization of tx_table each time we recreate
netvsc_device.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -1252,6 +1252,9 @@ struct netvsc_device *netvsc_device_add(
 	if (!net_device)
 		return ERR_PTR(-ENOMEM);
 
+	for (i = 0; i < VRSS_SEND_TAB_SIZE; i++)
+		net_device_ctx->tx_table[i] = 0;
+
 	net_device->ring_size = ring_size;
 
 	/* Because the device uses NAPI, all the interrupt batching and

[PATCH 4.14 016/165] hv_netvsc: Set tx_table to equal weight after subchannels open

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Commit a6fb6aa3cfa9047b62653dbcfc9bcde6e2272b41 upstream. ]

In some cases, like internal vSwitch, the host doesn't provide
send indirection table updates. This patch sets the table to be
equal weight after subchannels are all open. Otherwise, all workload
will be on one TX channel.

As tested, this patch has largely increased the throughput over
internal vSwitch.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/rndis_filter.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1114,6 +1114,9 @@ void rndis_set_subchannel(struct work_st
 	netif_set_real_num_tx_queues(ndev, nvdev->num_chn);
 	netif_set_real_num_rx_queues(ndev, nvdev->num_chn);
 
+	for (i = 0; i < VRSS_SEND_TAB_SIZE; i++)
+		ndev_ctx->tx_table[i] = i % nvdev->num_chn;
+
 	rtnl_unlock();
 	return;
 

[PATCH 4.14 017/165] hv_netvsc: netvsc_teardown_gpadl() split

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Commit 0cf737808ae7cb25e952be619db46b9147a92f46 upstream. ]

It was found that in some cases host refuses to teardown GPADL for send/
receive buffers (probably when some work with these buffere is scheduled or
ongoing). Change the teardown logic to be:
1) Send NVSP_MSG1_TYPE_REVOKE_* messages
2) Close the channel
3) Teardown GPADLs.
This seems to work reliably.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |   69 ++++++++++++++++++++++----------------------
 1 file changed, 36 insertions(+), 33 deletions(-)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -100,12 +100,11 @@ static void free_netvsc_device_rcu(struc
 	call_rcu(&nvdev->rcu, free_netvsc_device);
 }
 
-static void netvsc_destroy_buf(struct hv_device *device)
+static void netvsc_revoke_buf(struct hv_device *device,
+			      struct netvsc_device *net_device)
 {
 	struct nvsp_message *revoke_packet;
 	struct net_device *ndev = hv_get_drvdata(device);
-	struct net_device_context *ndc = netdev_priv(ndev);
-	struct netvsc_device *net_device = rtnl_dereference(ndc->nvdev);
 	int ret;
 
 	/*
@@ -148,28 +147,6 @@ static void netvsc_destroy_buf(struct hv
 		net_device->recv_section_cnt = 0;
 	}
 
-	/* Teardown the gpadl on the vsp end */
-	if (net_device->recv_buf_gpadl_handle) {
-		ret = vmbus_teardown_gpadl(device->channel,
-					   net_device->recv_buf_gpadl_handle);
-
-		/* If we failed here, we might as well return and have a leak
-		 * rather than continue and a bugchk
-		 */
-		if (ret != 0) {
-			netdev_err(ndev,
-				   "unable to teardown receive buffer's gpadl\n");
-			return;
-		}
-		net_device->recv_buf_gpadl_handle = 0;
-	}
-
-	if (net_device->recv_buf) {
-		/* Free up the receive buffer */
-		vfree(net_device->recv_buf);
-		net_device->recv_buf = NULL;
-	}
-
 	/* Deal with the send buffer we may have setup.
 	 * If we got a  send section size, it means we received a
 	 * NVSP_MSG1_TYPE_SEND_SEND_BUF_COMPLETE msg (ie sent
@@ -210,7 +187,35 @@ static void netvsc_destroy_buf(struct hv
 		}
 		net_device->send_section_cnt = 0;
 	}
-	/* Teardown the gpadl on the vsp end */
+}
+
+static void netvsc_teardown_gpadl(struct hv_device *device,
+				  struct netvsc_device *net_device)
+{
+	struct net_device *ndev = hv_get_drvdata(device);
+	int ret;
+
+	if (net_device->recv_buf_gpadl_handle) {
+		ret = vmbus_teardown_gpadl(device->channel,
+					   net_device->recv_buf_gpadl_handle);
+
+		/* If we failed here, we might as well return and have a leak
+		 * rather than continue and a bugchk
+		 */
+		if (ret != 0) {
+			netdev_err(ndev,
+				   "unable to teardown receive buffer's gpadl\n");
+			return;
+		}
+		net_device->recv_buf_gpadl_handle = 0;
+	}
+
+	if (net_device->recv_buf) {
+		/* Free up the receive buffer */
+		vfree(net_device->recv_buf);
+		net_device->recv_buf = NULL;
+	}
+
 	if (net_device->send_buf_gpadl_handle) {
 		ret = vmbus_teardown_gpadl(device->channel,
 					   net_device->send_buf_gpadl_handle);
@@ -425,7 +430,8 @@ static int netvsc_init_buf(struct hv_dev
 	goto exit;
 
 cleanup:
-	netvsc_destroy_buf(device);
+	netvsc_revoke_buf(device, net_device);
+	netvsc_teardown_gpadl(device, net_device);
 
 exit:
 	return ret;
@@ -544,11 +550,6 @@ cleanup:
 	return ret;
 }
 
-static void netvsc_disconnect_vsp(struct hv_device *device)
-{
-	netvsc_destroy_buf(device);
-}
-
 /*
  * netvsc_device_remove - Callback when the root bus device is removed
  */
@@ -562,7 +563,7 @@ void netvsc_device_remove(struct hv_devi
 
 	cancel_work_sync(&net_device->subchan_work);
 
-	netvsc_disconnect_vsp(device);
+	netvsc_revoke_buf(device, net_device);
 
 	RCU_INIT_POINTER(net_device_ctx->nvdev, NULL);
 
@@ -575,6 +576,8 @@ void netvsc_device_remove(struct hv_devi
 	/* Now, we can close the channel safely */
 	vmbus_close(device->channel);
 
+	netvsc_teardown_gpadl(device, net_device);
+
 	/* And dissassociate NAPI context from device */
 	for (i = 0; i < net_device->num_chn; i++)
 		netif_napi_del(&net_device->chan_table[i].napi);

[PATCH 4.14 018/165] hv_netvsc: preserve hw_features on mtu/channels/ringparam changes

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Commit aefd80e874e98a864915df5b7d90824a4340b450 upstream. ]

rndis_filter_device_add() is called both from netvsc_probe() when we
initially create the device and from set channels/mtu/ringparam
routines where we basically remove the device and add it back.

hw_features is reset in rndis_filter_device_add() and filled with
host data. However, we lose all additional flags which are set outside
of the driver, e.g. register_netdevice() adds NETIF_F_SOFT_FEATURES and
many others.

Unfortunately, calls to rndis_{query_hwcaps(), _set_offload_params()}
calls cannot be avoided on every RNDIS reset: host expects us to set
required features explicitly. Moreover, in theory hardware capabilities
can change and we need to reflect the change in hw_features.

Reset net->hw_features bits according to host data in
rndis_netdev_set_hwcaps(), clear corresponding feature bits
from net->features in case some features went missing (will never happen
in real life I guess but let's be consistent).

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/hyperv_net.h   |    4 +
 drivers/net/hyperv/netvsc_drv.c   |    2 
 drivers/net/hyperv/rndis_filter.c |  136 +++++++++++++++++++++-----------------
 3 files changed, 83 insertions(+), 59 deletions(-)

--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -659,6 +659,10 @@ struct nvsp_message {
 #define NETVSC_RECEIVE_BUFFER_ID		0xcafe
 #define NETVSC_SEND_BUFFER_ID			0
 
+#define NETVSC_SUPPORTED_HW_FEATURES (NETIF_F_RXCSUM | NETIF_F_IP_CSUM | \
+				      NETIF_F_TSO | NETIF_F_IPV6_CSUM | \
+				      NETIF_F_TSO6)
+
 #define VRSS_SEND_TAB_SIZE 16  /* must be power of 2 */
 #define VRSS_CHANNEL_MAX 64
 #define VRSS_CHANNEL_DEFAULT 8
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -1956,7 +1956,7 @@ static int netvsc_probe(struct hv_device
 
 	memcpy(net->dev_addr, device_info.mac_adr, ETH_ALEN);
 
-	/* hw_features computed in rndis_filter_device_add */
+	/* hw_features computed in rndis_netdev_set_hwcaps() */
 	net->features = net->hw_features |
 		NETIF_F_HIGHDMA | NETIF_F_SG |
 		NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1131,69 +1131,20 @@ unlock:
 	rtnl_unlock();
 }
 
-struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
-				      struct netvsc_device_info *device_info)
+static int rndis_netdev_set_hwcaps(struct rndis_device *rndis_device,
+				   struct netvsc_device *nvdev)
 {
-	struct net_device *net = hv_get_drvdata(dev);
+	struct net_device *net = rndis_device->ndev;
 	struct net_device_context *net_device_ctx = netdev_priv(net);
-	struct netvsc_device *net_device;
-	struct rndis_device *rndis_device;
 	struct ndis_offload hwcaps;
 	struct ndis_offload_params offloads;
-	struct ndis_recv_scale_cap rsscap;
-	u32 rsscap_size = sizeof(struct ndis_recv_scale_cap);
 	unsigned int gso_max_size = GSO_MAX_SIZE;
-	u32 mtu, size;
-	const struct cpumask *node_cpu_mask;
-	u32 num_possible_rss_qs;
-	int i, ret;
-
-	rndis_device = get_rndis_device();
-	if (!rndis_device)
-		return ERR_PTR(-ENODEV);
-
-	/*
-	 * Let the inner driver handle this first to create the netvsc channel
-	 * NOTE! Once the channel is created, we may get a receive callback
-	 * (RndisFilterOnReceive()) before this call is completed
-	 */
-	net_device = netvsc_device_add(dev, device_info);
-	if (IS_ERR(net_device)) {
-		kfree(rndis_device);
-		return net_device;
-	}
-
-	/* Initialize the rndis device */
-	net_device->max_chn = 1;
-	net_device->num_chn = 1;
-
-	net_device->extension = rndis_device;
-	rndis_device->ndev = net;
-
-	/* Send the rndis initialization message */
-	ret = rndis_filter_init_device(rndis_device, net_device);
-	if (ret != 0)
-		goto err_dev_remv;
-
-	/* Get the MTU from the host */
-	size = sizeof(u32);
-	ret = rndis_filter_query_device(rndis_device, net_device,
-					RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
-					&mtu, &size);
-	if (ret == 0 && size == sizeof(u32) && mtu < net->mtu)
-		net->mtu = mtu;
-
-	/* Get the mac address */
-	ret = rndis_filter_query_device_mac(rndis_device, net_device);
-	if (ret != 0)
-		goto err_dev_remv;
-
-	memcpy(device_info->mac_adr, rndis_device->hw_mac_adr, ETH_ALEN);
+	int ret;
 
 	/* Find HW offload capabilities */
-	ret = rndis_query_hwcaps(rndis_device, net_device, &hwcaps);
+	ret = rndis_query_hwcaps(rndis_device, nvdev, &hwcaps);
 	if (ret != 0)
-		goto err_dev_remv;
+		return ret;
 
 	/* A value of zero means "no change"; now turn on what we want. */
 	memset(&offloads, 0, sizeof(struct ndis_offload_params));
@@ -1201,8 +1152,12 @@ struct netvsc_device *rndis_filter_devic
 	/* Linux does not care about IP checksum, always does in kernel */
 	offloads.ip_v4_csum = NDIS_OFFLOAD_PARAMETERS_TX_RX_DISABLED;
 
+	/* Reset previously set hw_features flags */
+	net->hw_features &= ~NETVSC_SUPPORTED_HW_FEATURES;
+	net_device_ctx->tx_checksum_mask = 0;
+
 	/* Compute tx offload settings based on hw capabilities */
-	net->hw_features = NETIF_F_RXCSUM;
+	net->hw_features |= NETIF_F_RXCSUM;
 
 	if ((hwcaps.csum.ip4_txcsum & NDIS_TXCSUM_ALL_TCP4) == NDIS_TXCSUM_ALL_TCP4) {
 		/* Can checksum TCP */
@@ -1246,10 +1201,75 @@ struct netvsc_device *rndis_filter_devic
 		}
 	}
 
+	/* In case some hw_features disappeared we need to remove them from
+	 * net->features list as they're no longer supported.
+	 */
+	net->features &= ~NETVSC_SUPPORTED_HW_FEATURES | net->hw_features;
+
 	netif_set_gso_max_size(net, gso_max_size);
 
-	ret = rndis_filter_set_offload_params(net, net_device, &offloads);
-	if (ret)
+	ret = rndis_filter_set_offload_params(net, nvdev, &offloads);
+
+	return ret;
+}
+
+struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
+				      struct netvsc_device_info *device_info)
+{
+	struct net_device *net = hv_get_drvdata(dev);
+	struct netvsc_device *net_device;
+	struct rndis_device *rndis_device;
+	struct ndis_recv_scale_cap rsscap;
+	u32 rsscap_size = sizeof(struct ndis_recv_scale_cap);
+	u32 mtu, size;
+	const struct cpumask *node_cpu_mask;
+	u32 num_possible_rss_qs;
+	int i, ret;
+
+	rndis_device = get_rndis_device();
+	if (!rndis_device)
+		return ERR_PTR(-ENODEV);
+
+	/* Let the inner driver handle this first to create the netvsc channel
+	 * NOTE! Once the channel is created, we may get a receive callback
+	 * (RndisFilterOnReceive()) before this call is completed
+	 */
+	net_device = netvsc_device_add(dev, device_info);
+	if (IS_ERR(net_device)) {
+		kfree(rndis_device);
+		return net_device;
+	}
+
+	/* Initialize the rndis device */
+	net_device->max_chn = 1;
+	net_device->num_chn = 1;
+
+	net_device->extension = rndis_device;
+	rndis_device->ndev = net;
+
+	/* Send the rndis initialization message */
+	ret = rndis_filter_init_device(rndis_device, net_device);
+	if (ret != 0)
+		goto err_dev_remv;
+
+	/* Get the MTU from the host */
+	size = sizeof(u32);
+	ret = rndis_filter_query_device(rndis_device, net_device,
+					RNDIS_OID_GEN_MAXIMUM_FRAME_SIZE,
+					&mtu, &size);
+	if (ret == 0 && size == sizeof(u32) && mtu < net->mtu)
+		net->mtu = mtu;
+
+	/* Get the mac address */
+	ret = rndis_filter_query_device_mac(rndis_device, net_device);
+	if (ret != 0)
+		goto err_dev_remv;
+
+	memcpy(device_info->mac_adr, rndis_device->hw_mac_adr, ETH_ALEN);
+
+	/* Query and set hardware capabilities */
+	ret = rndis_netdev_set_hwcaps(rndis_device, net_device);
+	if (ret != 0)
 		goto err_dev_remv;
 
 	rndis_filter_query_device_link_status(rndis_device, net_device);

[PATCH 4.14 019/165] hv_netvsc: empty current transmit aggregation if flow blocked

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <stephen@networkplumber.org>

[ Commit cfd8afd986cdb59ea9adac873c5082498a1eb7c0 upstream. ]

If the transmit queue is known full, then don't keep aggregating
data. And the cp_partial flag which indicates that the current
aggregation buffer is full can be folded in to avoid more
conditionals.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/hyperv_net.h   |    2 +-
 drivers/net/hyperv/netvsc.c       |   36 +++++++++++++++++++++---------------
 drivers/net/hyperv/netvsc_drv.c   |    2 +-
 drivers/net/hyperv/rndis_filter.c |    3 +--
 4 files changed, 24 insertions(+), 19 deletions(-)

--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -192,7 +192,7 @@ struct netvsc_device *netvsc_device_add(
 					const struct netvsc_device_info *info);
 int netvsc_alloc_recv_comp_ring(struct netvsc_device *net_device, u32 q_idx);
 void netvsc_device_remove(struct hv_device *device);
-int netvsc_send(struct net_device_context *ndc,
+int netvsc_send(struct net_device *net,
 		struct hv_netvsc_packet *packet,
 		struct rndis_message *rndis_msg,
 		struct hv_page_buffer *page_buffer,
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -700,13 +700,13 @@ static u32 netvsc_get_next_send_section(
 	return NETVSC_INVALID_INDEX;
 }
 
-static u32 netvsc_copy_to_send_buf(struct netvsc_device *net_device,
-				   unsigned int section_index,
-				   u32 pend_size,
-				   struct hv_netvsc_packet *packet,
-				   struct rndis_message *rndis_msg,
-				   struct hv_page_buffer *pb,
-				   struct sk_buff *skb)
+static void netvsc_copy_to_send_buf(struct netvsc_device *net_device,
+				    unsigned int section_index,
+				    u32 pend_size,
+				    struct hv_netvsc_packet *packet,
+				    struct rndis_message *rndis_msg,
+				    struct hv_page_buffer *pb,
+				    bool xmit_more)
 {
 	char *start = net_device->send_buf;
 	char *dest = start + (section_index * net_device->send_section_size)
@@ -719,7 +719,8 @@ static u32 netvsc_copy_to_send_buf(struc
 		packet->page_buf_cnt;
 
 	/* Add padding */
-	if (skb->xmit_more && remain && !packet->cp_partial) {
+	remain = packet->total_data_buflen & (net_device->pkt_align - 1);
+	if (xmit_more && remain) {
 		padding = net_device->pkt_align - remain;
 		rndis_msg->msg_len += padding;
 		packet->total_data_buflen += padding;
@@ -739,8 +740,6 @@ static u32 netvsc_copy_to_send_buf(struc
 		memset(dest, 0, padding);
 		msg_size += padding;
 	}
-
-	return msg_size;
 }
 
 static inline int netvsc_send_pkt(
@@ -828,12 +827,13 @@ static inline void move_pkt_msd(struct h
 }
 
 /* RCU already held by caller */
-int netvsc_send(struct net_device_context *ndev_ctx,
+int netvsc_send(struct net_device *ndev,
 		struct hv_netvsc_packet *packet,
 		struct rndis_message *rndis_msg,
 		struct hv_page_buffer *pb,
 		struct sk_buff *skb)
 {
+	struct net_device_context *ndev_ctx = netdev_priv(ndev);
 	struct netvsc_device *net_device
 		= rcu_dereference_bh(ndev_ctx->nvdev);
 	struct hv_device *device = ndev_ctx->device_ctx;
@@ -844,8 +844,7 @@ int netvsc_send(struct net_device_contex
 	struct multi_send_data *msdp;
 	struct hv_netvsc_packet *msd_send = NULL, *cur_send = NULL;
 	struct sk_buff *msd_skb = NULL;
-	bool try_batch;
-	bool xmit_more = (skb != NULL) ? skb->xmit_more : false;
+	bool try_batch, xmit_more;
 
 	/* If device is rescinded, return error and packet will get dropped. */
 	if (unlikely(!net_device || net_device->destroy))
@@ -896,10 +895,17 @@ int netvsc_send(struct net_device_contex
 		}
 	}
 
+	/* Keep aggregating only if stack says more data is coming
+	 * and not doing mixed modes send and not flow blocked
+	 */
+	xmit_more = skb->xmit_more &&
+		!packet->cp_partial &&
+		!netif_xmit_stopped(netdev_get_tx_queue(ndev, packet->q_idx));
+
 	if (section_index != NETVSC_INVALID_INDEX) {
 		netvsc_copy_to_send_buf(net_device,
 					section_index, msd_len,
-					packet, rndis_msg, pb, skb);
+					packet, rndis_msg, pb, xmit_more);
 
 		packet->send_buf_index = section_index;
 
@@ -919,7 +925,7 @@ int netvsc_send(struct net_device_contex
 		if (msdp->skb)
 			dev_consume_skb_any(msdp->skb);
 
-		if (xmit_more && !packet->cp_partial) {
+		if (xmit_more) {
 			msdp->skb = skb;
 			msdp->pkt = packet;
 			msdp->count++;
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -614,7 +614,7 @@ static int netvsc_start_xmit(struct sk_b
 	/* timestamp packet in software */
 	skb_tx_timestamp(skb);
 
-	ret = netvsc_send(net_device_ctx, packet, rndis_msg, pb, skb);
+	ret = netvsc_send(net, packet, rndis_msg, pb, skb);
 	if (likely(ret == 0))
 		return NETDEV_TX_OK;
 
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -217,7 +217,6 @@ static int rndis_filter_send_request(str
 	struct hv_netvsc_packet *packet;
 	struct hv_page_buffer page_buf[2];
 	struct hv_page_buffer *pb = page_buf;
-	struct net_device_context *net_device_ctx = netdev_priv(dev->ndev);
 	int ret;
 
 	/* Setup the packet to send it */
@@ -245,7 +244,7 @@ static int rndis_filter_send_request(str
 	}
 
 	rcu_read_lock_bh();
-	ret = netvsc_send(net_device_ctx, packet, NULL, pb, NULL);
+	ret = netvsc_send(dev->ndev, packet, NULL, pb, NULL);
 	rcu_read_unlock_bh();
 
 	return ret;

[PATCH 4.14 020/165] hv_netvsc: Use the num_online_cpus() for channel limit

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Commit 25a39f7f975c3c26a0052fbf9b59201c06744332 upstream. ]

Since we no longer localize channel/CPU affiliation within one NUMA
node, num_online_cpus() is used as the number of channel cap, instead of
the number of processors in a NUMA node.

This patch allows a bigger range for tuning the number of channels.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/rndis_filter.c |   11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1221,7 +1221,6 @@ struct netvsc_device *rndis_filter_devic
 	struct ndis_recv_scale_cap rsscap;
 	u32 rsscap_size = sizeof(struct ndis_recv_scale_cap);
 	u32 mtu, size;
-	const struct cpumask *node_cpu_mask;
 	u32 num_possible_rss_qs;
 	int i, ret;
 
@@ -1290,14 +1289,8 @@ struct netvsc_device *rndis_filter_devic
 	if (ret || rsscap.num_recv_que < 2)
 		goto out;
 
-	/*
-	 * We will limit the VRSS channels to the number CPUs in the NUMA node
-	 * the primary channel is currently bound to.
-	 *
-	 * This also guarantees that num_possible_rss_qs <= num_online_cpus
-	 */
-	node_cpu_mask = cpumask_of_node(cpu_to_node(dev->channel->target_cpu));
-	num_possible_rss_qs = min_t(u32, cpumask_weight(node_cpu_mask),
+	/* This guarantees that num_possible_rss_qs <= num_online_cpus */
+	num_possible_rss_qs = min_t(u32, num_online_cpus(),
 				    rsscap.num_recv_que);
 
 	net_device->max_chn = min_t(u32, VRSS_CHANNEL_MAX, num_possible_rss_qs);

[PATCH 4.14 021/165] hv_netvsc: avoid retry on send during shutdown

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <stephen@networkplumber.org>

[ Commit 12f69661a49446840d742d8feb593ace022d9f66 upstream. ]

Change the initialization order so that the device is ready to transmit
(ie connect vsp is completed) before setting the internal reference
to the device with RCU.

This avoids any races on initialization and prevents retry issues
on shutdown.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |   24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -850,13 +850,6 @@ int netvsc_send(struct net_device *ndev,
 	if (unlikely(!net_device || net_device->destroy))
 		return -ENODEV;
 
-	/* We may race with netvsc_connect_vsp()/netvsc_init_buf() and get
-	 * here before the negotiation with the host is finished and
-	 * send_section_map may not be allocated yet.
-	 */
-	if (unlikely(!net_device->send_section_map))
-		return -EAGAIN;
-
 	nvchan = &net_device->chan_table[packet->q_idx];
 	packet->send_buf_index = NETVSC_INVALID_INDEX;
 	packet->cp_partial = false;
@@ -864,10 +857,8 @@ int netvsc_send(struct net_device *ndev,
 	/* Send control message directly without accessing msd (Multi-Send
 	 * Data) field which may be changed during data packet processing.
 	 */
-	if (!skb) {
-		cur_send = packet;
-		goto send_now;
-	}
+	if (!skb)
+		return netvsc_send_pkt(device, packet, net_device, pb, skb);
 
 	/* batch packets in send buffer if possible */
 	msdp = &nvchan->msd;
@@ -951,7 +942,6 @@ int netvsc_send(struct net_device *ndev,
 		}
 	}
 
-send_now:
 	if (cur_send)
 		ret = netvsc_send_pkt(device, cur_send, net_device, pb, skb);
 
@@ -1308,11 +1298,6 @@ struct netvsc_device *netvsc_device_add(
 
 	napi_enable(&net_device->chan_table[0].napi);
 
-	/* Writing nvdev pointer unlocks netvsc_send(), make sure chn_table is
-	 * populated.
-	 */
-	rcu_assign_pointer(net_device_ctx->nvdev, net_device);
-
 	/* Connect with the NetVsp */
 	ret = netvsc_connect_vsp(device, net_device, device_info);
 	if (ret != 0) {
@@ -1321,6 +1306,11 @@ struct netvsc_device *netvsc_device_add(
 		goto close;
 	}
 
+	/* Writing nvdev pointer unlocks netvsc_send(), make sure chn_table is
+	 * populated.
+	 */
+	rcu_assign_pointer(net_device_ctx->nvdev, net_device);
+
 	return net_device;
 
 close:

[PATCH 4.14 022/165] hv_netvsc: only wake transmit queue if link is up

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <stephen@networkplumber.org>

[ Commit f4950e4586dfc957e0a28226eeb992ddc049b5a2 upstream. ]

Don't wake transmit queues if link is not up yet.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc_drv.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -88,12 +88,11 @@ static int netvsc_open(struct net_device
 		return ret;
 	}
 
-	netif_tx_wake_all_queues(net);
-
 	rdev = nvdev->extension;
-
-	if (!rdev->link_state)
+	if (!rdev->link_state) {
 		netif_carrier_on(net);
+		netif_tx_wake_all_queues(net);
+	}
 
 	if (vf_netdev) {
 		/* Setting synthetic device up transparently sets

[PATCH 4.14 023/165] hv_netvsc: fix error unwind handling if vmbus_open fails

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <stephen@networkplumber.org>

[ Commit fcfb4a00d1e514e8313277a01ef919de1113025b upstream. ]

Need to delete NAPI association if vmbus_open fails.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -1288,7 +1288,6 @@ struct netvsc_device *netvsc_device_add(
 			 net_device->chan_table);
 
 	if (ret != 0) {
-		netif_napi_del(&net_device->chan_table[0].napi);
 		netdev_err(ndev, "unable to open channel: %d\n", ret);
 		goto cleanup;
 	}
@@ -1321,6 +1320,7 @@ close:
 	vmbus_close(device->channel);
 
 cleanup:
+	netif_napi_del(&net_device->chan_table[0].napi);
 	free_netvsc_device(&net_device->rcu);
 
 	return ERR_PTR(ret);

[PATCH 4.14 024/165] hv_netvsc: cancel subchannel setup before halting device

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <stephen@networkplumber.org>

[ Commit a7483ec0267c69b34e818738da60b392623da94b upstream. ]

Block setup of multiple channels earlier in the teardown
process. This avoids possible races between halt and subchannel
initialization.

Suggested-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/rndis_filter.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1340,6 +1340,9 @@ void rndis_filter_device_remove(struct h
 {
 	struct rndis_device *rndis_dev = net_dev->extension;
 
+	/* Don't try and setup sub channels if about to halt */
+	cancel_work_sync(&net_dev->subchan_work);
+
 	/* Halt and release the rndis device */
 	rndis_filter_halt_device(rndis_dev);
 

[PATCH 4.14 025/165] hv_netvsc: fix race in napi poll when rescheduling

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <stephen@networkplumber.org>

[ Commit d64e38ae690e3337db0d38d9b149a193a1646c4b upstream. ]

There is a race between napi_reschedule and re-enabling interrupts
which could lead to missed host interrrupts.  This occurs when
interrupts are re-enabled (hv_end_read) and vmbus irq callback
(netvsc_channel_cb) has already scheduled NAPI.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -1205,9 +1205,10 @@ int netvsc_poll(struct napi_struct *napi
 	if (send_recv_completions(ndev, net_device, nvchan) == 0 &&
 	    work_done < budget &&
 	    napi_complete_done(napi, work_done) &&
-	    hv_end_read(&channel->inbound)) {
+	    hv_end_read(&channel->inbound) &&
+	    napi_schedule_prep(napi)) {
 		hv_begin_read(&channel->inbound);
-		napi_reschedule(napi);
+		__napi_schedule(napi);
 	}
 
 	/* Driver may overshoot since multiple packets per descriptor */

[PATCH 4.14 026/165] hv_netvsc: defer queue selection to VF

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <stephen@networkplumber.org>

[ Commit b3bf5666a51068ad5ddd89a76ed877101ef3bc16 upstream. ]

When VF is used for accelerated networking it will likely have
more queues (and different policy) than the synthetic NIC.
This patch defers the queue policy to the VF so that all the
queues can be used. This impacts workloads like local generate UDP.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc_drv.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -283,8 +283,19 @@ static u16 netvsc_select_queue(struct ne
 	rcu_read_lock();
 	vf_netdev = rcu_dereference(ndc->vf_netdev);
 	if (vf_netdev) {
-		txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
-		qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb->queue_mapping;
+		const struct net_device_ops *vf_ops = vf_netdev->netdev_ops;
+
+		if (vf_ops->ndo_select_queue)
+			txq = vf_ops->ndo_select_queue(vf_netdev, skb,
+						       accel_priv, fallback);
+		else
+			txq = fallback(vf_netdev, skb);
+
+		/* Record the queue selected by VF so that it can be
+		 * used for common case where VF has more queues than
+		 * the synthetic device.
+		 */
+		qdisc_skb_cb(skb)->slave_dev_queue_mapping = txq;
 	} else {
 		txq = netvsc_pick_tx(ndev, skb);
 	}

[PATCH 4.14 027/165] hv_netvsc: disable NAPI before channel close

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <stephen@networkplumber.org>

[ Commit 8348e0460ab1473f06c8b824699dd2eed3c1979d upstream. ]

This makes sure that no CPU is still process packets when
the channel is closed.

Fixes: 76bb5db5c749 ("netvsc: fix use after free on module removal")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -567,6 +567,10 @@ void netvsc_device_remove(struct hv_devi
 
 	RCU_INIT_POINTER(net_device_ctx->nvdev, NULL);
 
+	/* And disassociate NAPI context from device */
+	for (i = 0; i < net_device->num_chn; i++)
+		netif_napi_del(&net_device->chan_table[i].napi);
+
 	/*
 	 * At this point, no one should be accessing net_device
 	 * except in here
@@ -578,10 +582,6 @@ void netvsc_device_remove(struct hv_devi
 
 	netvsc_teardown_gpadl(device, net_device);
 
-	/* And dissassociate NAPI context from device */
-	for (i = 0; i < net_device->num_chn; i++)
-		netif_napi_del(&net_device->chan_table[i].napi);
-
 	/* Release all resources */
 	free_netvsc_device_rcu(net_device);
 }

[PATCH 4.14 028/165] hv_netvsc: use RCU to fix concurrent rx and queue changes

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <stephen@networkplumber.org>

[ Commit 02400fcee2542ee334a2394e0d9f6efd969fe782 upstream. ]

The receive processing may continue to happen while the
internal network device state is in RCU grace period.
The internal RNDIS structure is associated with the
internal netvsc_device structure; both have the same
RCU lifetime.

Defer freeing all associated parts until after grace
period.

Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c       |   17 ++++------------
 drivers/net/hyperv/rndis_filter.c |   39 ++++++++++++++++----------------------
 2 files changed, 22 insertions(+), 34 deletions(-)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -89,6 +89,11 @@ static void free_netvsc_device(struct rc
 		= container_of(head, struct netvsc_device, rcu);
 	int i;
 
+	kfree(nvdev->extension);
+	vfree(nvdev->recv_buf);
+	vfree(nvdev->send_buf);
+	kfree(nvdev->send_section_map);
+
 	for (i = 0; i < VRSS_CHANNEL_MAX; i++)
 		vfree(nvdev->chan_table[i].mrc.slots);
 
@@ -210,12 +215,6 @@ static void netvsc_teardown_gpadl(struct
 		net_device->recv_buf_gpadl_handle = 0;
 	}
 
-	if (net_device->recv_buf) {
-		/* Free up the receive buffer */
-		vfree(net_device->recv_buf);
-		net_device->recv_buf = NULL;
-	}
-
 	if (net_device->send_buf_gpadl_handle) {
 		ret = vmbus_teardown_gpadl(device->channel,
 					   net_device->send_buf_gpadl_handle);
@@ -230,12 +229,6 @@ static void netvsc_teardown_gpadl(struct
 		}
 		net_device->send_buf_gpadl_handle = 0;
 	}
-	if (net_device->send_buf) {
-		/* Free up the send buffer */
-		vfree(net_device->send_buf);
-		net_device->send_buf = NULL;
-	}
-	kfree(net_device->send_section_map);
 }
 
 int netvsc_alloc_recv_comp_ring(struct netvsc_device *net_device, u32 q_idx)
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -266,13 +266,23 @@ static void rndis_set_link_state(struct
 	}
 }
 
-static void rndis_filter_receive_response(struct rndis_device *dev,
-				       struct rndis_message *resp)
+static void rndis_filter_receive_response(struct net_device *ndev,
+					  struct netvsc_device *nvdev,
+					  const struct rndis_message *resp)
 {
+	struct rndis_device *dev = nvdev->extension;
 	struct rndis_request *request = NULL;
 	bool found = false;
 	unsigned long flags;
-	struct net_device *ndev = dev->ndev;
+
+	/* This should never happen, it means control message
+	 * response received after device removed.
+	 */
+	if (dev->state == RNDIS_DEV_UNINITIALIZED) {
+		netdev_err(ndev,
+			   "got rndis message uninitialized\n");
+		return;
+	}
 
 	spin_lock_irqsave(&dev->request_lock, flags);
 	list_for_each_entry(request, &dev->req_list, list_ent) {
@@ -353,7 +363,7 @@ static inline void *rndis_get_ppi(struct
 }
 
 static int rndis_filter_receive_data(struct net_device *ndev,
-				     struct rndis_device *dev,
+				     struct netvsc_device *nvdev,
 				     struct rndis_message *msg,
 				     struct vmbus_channel *channel,
 				     void *data, u32 data_buflen)
@@ -373,7 +383,7 @@ static int rndis_filter_receive_data(str
 	 * should be the data packet size plus the trailer padding size
 	 */
 	if (unlikely(data_buflen < rndis_pkt->data_len)) {
-		netdev_err(dev->ndev, "rndis message buffer "
+		netdev_err(ndev, "rndis message buffer "
 			   "overflow detected (got %u, min %u)"
 			   "...dropping this message!\n",
 			   data_buflen, rndis_pkt->data_len);
@@ -401,34 +411,20 @@ int rndis_filter_receive(struct net_devi
 			 void *data, u32 buflen)
 {
 	struct net_device_context *net_device_ctx = netdev_priv(ndev);
-	struct rndis_device *rndis_dev = net_dev->extension;
 	struct rndis_message *rndis_msg = data;
 
-	/* Make sure the rndis device state is initialized */
-	if (unlikely(!rndis_dev)) {
-		netif_err(net_device_ctx, rx_err, ndev,
-			  "got rndis message but no rndis device!\n");
-		return NVSP_STAT_FAIL;
-	}
-
-	if (unlikely(rndis_dev->state == RNDIS_DEV_UNINITIALIZED)) {
-		netif_err(net_device_ctx, rx_err, ndev,
-			  "got rndis message uninitialized\n");
-		return NVSP_STAT_FAIL;
-	}
-
 	if (netif_msg_rx_status(net_device_ctx))
 		dump_rndis_message(dev, rndis_msg);
 
 	switch (rndis_msg->ndis_msg_type) {
 	case RNDIS_MSG_PACKET:
-		return rndis_filter_receive_data(ndev, rndis_dev, rndis_msg,
+		return rndis_filter_receive_data(ndev, net_dev, rndis_msg,
 						 channel, data, buflen);
 	case RNDIS_MSG_INIT_C:
 	case RNDIS_MSG_QUERY_C:
 	case RNDIS_MSG_SET_C:
 		/* completion msgs */
-		rndis_filter_receive_response(rndis_dev, rndis_msg);
+		rndis_filter_receive_response(ndev, net_dev, rndis_msg);
 		break;
 
 	case RNDIS_MSG_INDICATE:
@@ -1349,7 +1345,6 @@ void rndis_filter_device_remove(struct h
 	net_dev->extension = NULL;
 
 	netvsc_device_remove(dev);
-	kfree(rndis_dev);
 }
 
 int rndis_filter_open(struct netvsc_device *nvdev)

[PATCH 4.14 029/165] hv_netvsc: change GPAD teardown order on older versions

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <stephen@networkplumber.org>

[ Commit 0ef58b0a05c127762f975c3dfe8b922e4aa87a29 upstream. ]

On older versions of Windows, the host ignores messages after
vmbus channel is closed.

Workaround this by doing what Windows does and send the teardown
before close on older versions of NVSP protocol.

Reported-by: Mohammed Gamal <mgamal@redhat.com>
Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -570,10 +570,15 @@ void netvsc_device_remove(struct hv_devi
 	 */
 	netdev_dbg(ndev, "net device safe to remove\n");
 
+	/* older versions require that buffer be revoked before close */
+	if (net_device->nvsp_version < NVSP_PROTOCOL_VERSION_4)
+		netvsc_teardown_gpadl(device, net_device);
+
 	/* Now, we can close the channel safely */
 	vmbus_close(device->channel);
 
-	netvsc_teardown_gpadl(device, net_device);
+	if (net_device->nvsp_version >= NVSP_PROTOCOL_VERSION_4)
+		netvsc_teardown_gpadl(device, net_device);
 
 	/* Release all resources */
 	free_netvsc_device_rcu(net_device);

[PATCH 4.14 030/165] hv_netvsc: common detach logic

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <stephen@networkplumber.org>

[ Commit 7b2ee50c0cd513a176a26a71f2989facdd75bfea upstream. ]

Make common function for detaching internals of device
during changes to MTU and RSS. Make sure no more packets
are transmitted and all packets have been received before
doing device teardown.

Change the wait logic to be common and use usleep_range().

Changes transmit enabling logic so that transmit queues are disabled
during the period when lower device is being changed. And enabled
only after sub channels are setup. This avoids issue where it could
be that a packet was being sent while subchannel was not initialized.

Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/hyperv_net.h   |    1 
 drivers/net/hyperv/netvsc.c       |   21 +-
 drivers/net/hyperv/netvsc_drv.c   |  280 +++++++++++++++++++++-----------------
 drivers/net/hyperv/rndis_filter.c |   15 --
 4 files changed, 175 insertions(+), 142 deletions(-)

--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -208,7 +208,6 @@ void netvsc_channel_cb(void *context);
 int netvsc_poll(struct napi_struct *napi, int budget);
 
 void rndis_set_subchannel(struct work_struct *w);
-bool rndis_filter_opened(const struct netvsc_device *nvdev);
 int rndis_filter_open(struct netvsc_device *nvdev);
 int rndis_filter_close(struct netvsc_device *nvdev);
 struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -554,8 +554,6 @@ void netvsc_device_remove(struct hv_devi
 		= rtnl_dereference(net_device_ctx->nvdev);
 	int i;
 
-	cancel_work_sync(&net_device->subchan_work);
-
 	netvsc_revoke_buf(device, net_device);
 
 	RCU_INIT_POINTER(net_device_ctx->nvdev, NULL);
@@ -644,13 +642,18 @@ static void netvsc_send_tx_complete(stru
 	queue_sends =
 		atomic_dec_return(&net_device->chan_table[q_idx].queue_sends);
 
-	if (net_device->destroy && queue_sends == 0)
-		wake_up(&net_device->wait_drain);
-
-	if (netif_tx_queue_stopped(netdev_get_tx_queue(ndev, q_idx)) &&
-	    (hv_ringbuf_avail_percent(&channel->outbound) > RING_AVAIL_PERCENT_HIWATER ||
-	     queue_sends < 1))
-		netif_tx_wake_queue(netdev_get_tx_queue(ndev, q_idx));
+	if (unlikely(net_device->destroy)) {
+		if (queue_sends == 0)
+			wake_up(&net_device->wait_drain);
+	} else {
+		struct netdev_queue *txq = netdev_get_tx_queue(ndev, q_idx);
+
+		if (netif_tx_queue_stopped(txq) &&
+		    (hv_ringbuf_avail_percent(&channel->outbound) > RING_AVAIL_PERCENT_HIWATER ||
+		     queue_sends < 1)) {
+			netif_tx_wake_queue(txq);
+		}
+	}
 }
 
 static void netvsc_send_completion(struct netvsc_device *net_device,
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -45,7 +45,10 @@
 
 #include "hyperv_net.h"
 
-#define RING_SIZE_MIN		64
+#define RING_SIZE_MIN	64
+#define RETRY_US_LO	5000
+#define RETRY_US_HI	10000
+#define RETRY_MAX	2000	/* >10 sec */
 
 #define LINKCHANGE_INT (2 * HZ)
 #define VF_TAKEOVER_INT (HZ / 10)
@@ -89,10 +92,8 @@ static int netvsc_open(struct net_device
 	}
 
 	rdev = nvdev->extension;
-	if (!rdev->link_state) {
+	if (!rdev->link_state)
 		netif_carrier_on(net);
-		netif_tx_wake_all_queues(net);
-	}
 
 	if (vf_netdev) {
 		/* Setting synthetic device up transparently sets
@@ -108,36 +109,25 @@ static int netvsc_open(struct net_device
 	return 0;
 }
 
-static int netvsc_close(struct net_device *net)
+static int netvsc_wait_until_empty(struct netvsc_device *nvdev)
 {
-	struct net_device_context *net_device_ctx = netdev_priv(net);
-	struct net_device *vf_netdev
-		= rtnl_dereference(net_device_ctx->vf_netdev);
-	struct netvsc_device *nvdev = rtnl_dereference(net_device_ctx->nvdev);
-	int ret = 0;
-	u32 aread, i, msec = 10, retry = 0, retry_max = 20;
-	struct vmbus_channel *chn;
-
-	netif_tx_disable(net);
-
-	/* No need to close rndis filter if it is removed already */
-	if (!nvdev)
-		goto out;
-
-	ret = rndis_filter_close(nvdev);
-	if (ret != 0) {
-		netdev_err(net, "unable to close device (ret %d).\n", ret);
-		return ret;
-	}
+	unsigned int retry = 0;
+	int i;
 
 	/* Ensure pending bytes in ring are read */
-	while (true) {
-		aread = 0;
+	for (;;) {
+		u32 aread = 0;
+
 		for (i = 0; i < nvdev->num_chn; i++) {
-			chn = nvdev->chan_table[i].channel;
+			struct vmbus_channel *chn
+				= nvdev->chan_table[i].channel;
+
 			if (!chn)
 				continue;
 
+			/* make sure receive not running now */
+			napi_synchronize(&nvdev->chan_table[i].napi);
+
 			aread = hv_get_bytes_to_read(&chn->inbound);
 			if (aread)
 				break;
@@ -147,22 +137,40 @@ static int netvsc_close(struct net_devic
 				break;
 		}
 
-		retry++;
-		if (retry > retry_max || aread == 0)
-			break;
+		if (aread == 0)
+			return 0;
 
-		msleep(msec);
+		if (++retry > RETRY_MAX)
+			return -ETIMEDOUT;
 
-		if (msec < 1000)
-			msec *= 2;
+		usleep_range(RETRY_US_LO, RETRY_US_HI);
 	}
+}
 
-	if (aread) {
-		netdev_err(net, "Ring buffer not empty after closing rndis\n");
-		ret = -ETIMEDOUT;
+static int netvsc_close(struct net_device *net)
+{
+	struct net_device_context *net_device_ctx = netdev_priv(net);
+	struct net_device *vf_netdev
+		= rtnl_dereference(net_device_ctx->vf_netdev);
+	struct netvsc_device *nvdev = rtnl_dereference(net_device_ctx->nvdev);
+	int ret;
+
+	netif_tx_disable(net);
+
+	/* No need to close rndis filter if it is removed already */
+	if (!nvdev)
+		return 0;
+
+	ret = rndis_filter_close(nvdev);
+	if (ret != 0) {
+		netdev_err(net, "unable to close device (ret %d).\n", ret);
+		return ret;
 	}
 
-out:
+	ret = netvsc_wait_until_empty(nvdev);
+	if (ret)
+		netdev_err(net, "Ring buffer not empty after closing rndis\n");
+
 	if (vf_netdev)
 		dev_close(vf_netdev);
 
@@ -820,16 +828,81 @@ static void netvsc_get_channels(struct n
 	}
 }
 
+static int netvsc_detach(struct net_device *ndev,
+			 struct netvsc_device *nvdev)
+{
+	struct net_device_context *ndev_ctx = netdev_priv(ndev);
+	struct hv_device *hdev = ndev_ctx->device_ctx;
+	int ret;
+
+	/* Don't try continuing to try and setup sub channels */
+	if (cancel_work_sync(&nvdev->subchan_work))
+		nvdev->num_chn = 1;
+
+	/* If device was up (receiving) then shutdown */
+	if (netif_running(ndev)) {
+		netif_tx_disable(ndev);
+
+		ret = rndis_filter_close(nvdev);
+		if (ret) {
+			netdev_err(ndev,
+				   "unable to close device (ret %d).\n", ret);
+			return ret;
+		}
+
+		ret = netvsc_wait_until_empty(nvdev);
+		if (ret) {
+			netdev_err(ndev,
+				   "Ring buffer not empty after closing rndis\n");
+			return ret;
+		}
+	}
+
+	netif_device_detach(ndev);
+
+	rndis_filter_device_remove(hdev, nvdev);
+
+	return 0;
+}
+
+static int netvsc_attach(struct net_device *ndev,
+			 struct netvsc_device_info *dev_info)
+{
+	struct net_device_context *ndev_ctx = netdev_priv(ndev);
+	struct hv_device *hdev = ndev_ctx->device_ctx;
+	struct netvsc_device *nvdev;
+	struct rndis_device *rdev;
+	int ret;
+
+	nvdev = rndis_filter_device_add(hdev, dev_info);
+	if (IS_ERR(nvdev))
+		return PTR_ERR(nvdev);
+
+	/* Note: enable and attach happen when sub-channels setup */
+
+	netif_carrier_off(ndev);
+
+	if (netif_running(ndev)) {
+		ret = rndis_filter_open(nvdev);
+		if (ret)
+			return ret;
+
+		rdev = nvdev->extension;
+		if (!rdev->link_state)
+			netif_carrier_on(ndev);
+	}
+
+	return 0;
+}
+
 static int netvsc_set_channels(struct net_device *net,
 			       struct ethtool_channels *channels)
 {
 	struct net_device_context *net_device_ctx = netdev_priv(net);
-	struct hv_device *dev = net_device_ctx->device_ctx;
 	struct netvsc_device *nvdev = rtnl_dereference(net_device_ctx->nvdev);
 	unsigned int orig, count = channels->combined_count;
 	struct netvsc_device_info device_info;
-	bool was_opened;
-	int ret = 0;
+	int ret;
 
 	/* We do not support separate count for rx, tx, or other */
 	if (count == 0 ||
@@ -846,9 +919,6 @@ static int netvsc_set_channels(struct ne
 		return -EINVAL;
 
 	orig = nvdev->num_chn;
-	was_opened = rndis_filter_opened(nvdev);
-	if (was_opened)
-		rndis_filter_close(nvdev);
 
 	memset(&device_info, 0, sizeof(device_info));
 	device_info.num_chn = count;
@@ -858,28 +928,17 @@ static int netvsc_set_channels(struct ne
 	device_info.recv_sections = nvdev->recv_section_cnt;
 	device_info.recv_section_size = nvdev->recv_section_size;
 
-	rndis_filter_device_remove(dev, nvdev);
+	ret = netvsc_detach(net, nvdev);
+	if (ret)
+		return ret;
 
-	nvdev = rndis_filter_device_add(dev, &device_info);
-	if (IS_ERR(nvdev)) {
-		ret = PTR_ERR(nvdev);
+	ret = netvsc_attach(net, &device_info);
+	if (ret) {
 		device_info.num_chn = orig;
-		nvdev = rndis_filter_device_add(dev, &device_info);
-
-		if (IS_ERR(nvdev)) {
-			netdev_err(net, "restoring channel setting failed: %ld\n",
-				   PTR_ERR(nvdev));
-			return ret;
-		}
+		if (netvsc_attach(net, &device_info))
+			netdev_err(net, "restoring channel setting failed\n");
 	}
 
-	if (was_opened)
-		rndis_filter_open(nvdev);
-
-	/* We may have missed link change notifications */
-	net_device_ctx->last_reconfig = 0;
-	schedule_delayed_work(&net_device_ctx->dwork, 0);
-
 	return ret;
 }
 
@@ -946,10 +1005,8 @@ static int netvsc_change_mtu(struct net_
 	struct net_device_context *ndevctx = netdev_priv(ndev);
 	struct net_device *vf_netdev = rtnl_dereference(ndevctx->vf_netdev);
 	struct netvsc_device *nvdev = rtnl_dereference(ndevctx->nvdev);
-	struct hv_device *hdev = ndevctx->device_ctx;
 	int orig_mtu = ndev->mtu;
 	struct netvsc_device_info device_info;
-	bool was_opened;
 	int ret = 0;
 
 	if (!nvdev || nvdev->destroy)
@@ -962,11 +1019,6 @@ static int netvsc_change_mtu(struct net_
 			return ret;
 	}
 
-	netif_device_detach(ndev);
-	was_opened = rndis_filter_opened(nvdev);
-	if (was_opened)
-		rndis_filter_close(nvdev);
-
 	memset(&device_info, 0, sizeof(device_info));
 	device_info.ring_size = ring_size;
 	device_info.num_chn = nvdev->num_chn;
@@ -975,35 +1027,27 @@ static int netvsc_change_mtu(struct net_
 	device_info.recv_sections = nvdev->recv_section_cnt;
 	device_info.recv_section_size = nvdev->recv_section_size;
 
-	rndis_filter_device_remove(hdev, nvdev);
+	ret = netvsc_detach(ndev, nvdev);
+	if (ret)
+		goto rollback_vf;
 
 	ndev->mtu = mtu;
 
-	nvdev = rndis_filter_device_add(hdev, &device_info);
-	if (IS_ERR(nvdev)) {
-		ret = PTR_ERR(nvdev);
-
-		/* Attempt rollback to original MTU */
-		ndev->mtu = orig_mtu;
-		nvdev = rndis_filter_device_add(hdev, &device_info);
-
-		if (vf_netdev)
-			dev_set_mtu(vf_netdev, orig_mtu);
-
-		if (IS_ERR(nvdev)) {
-			netdev_err(ndev, "restoring mtu failed: %ld\n",
-				   PTR_ERR(nvdev));
-			return ret;
-		}
-	}
-
-	if (was_opened)
-		rndis_filter_open(nvdev);
+	ret = netvsc_attach(ndev, &device_info);
+	if (ret)
+		goto rollback;
 
-	netif_device_attach(ndev);
+	return 0;
 
-	/* We may have missed link change notifications */
-	schedule_delayed_work(&ndevctx->dwork, 0);
+rollback:
+	/* Attempt rollback to original MTU */
+	ndev->mtu = orig_mtu;
+
+	if (netvsc_attach(ndev, &device_info))
+		netdev_err(ndev, "restoring mtu failed\n");
+rollback_vf:
+	if (vf_netdev)
+		dev_set_mtu(vf_netdev, orig_mtu);
 
 	return ret;
 }
@@ -1469,11 +1513,9 @@ static int netvsc_set_ringparam(struct n
 {
 	struct net_device_context *ndevctx = netdev_priv(ndev);
 	struct netvsc_device *nvdev = rtnl_dereference(ndevctx->nvdev);
-	struct hv_device *hdev = ndevctx->device_ctx;
 	struct netvsc_device_info device_info;
 	struct ethtool_ringparam orig;
 	u32 new_tx, new_rx;
-	bool was_opened;
 	int ret = 0;
 
 	if (!nvdev || nvdev->destroy)
@@ -1499,34 +1541,18 @@ static int netvsc_set_ringparam(struct n
 	device_info.recv_sections = new_rx;
 	device_info.recv_section_size = nvdev->recv_section_size;
 
-	netif_device_detach(ndev);
-	was_opened = rndis_filter_opened(nvdev);
-	if (was_opened)
-		rndis_filter_close(nvdev);
-
-	rndis_filter_device_remove(hdev, nvdev);
-
-	nvdev = rndis_filter_device_add(hdev, &device_info);
-	if (IS_ERR(nvdev)) {
-		ret = PTR_ERR(nvdev);
+	ret = netvsc_detach(ndev, nvdev);
+	if (ret)
+		return ret;
 
+	ret = netvsc_attach(ndev, &device_info);
+	if (ret) {
 		device_info.send_sections = orig.tx_pending;
 		device_info.recv_sections = orig.rx_pending;
-		nvdev = rndis_filter_device_add(hdev, &device_info);
-		if (IS_ERR(nvdev)) {
-			netdev_err(ndev, "restoring ringparam failed: %ld\n",
-				   PTR_ERR(nvdev));
-			return ret;
-		}
-	}
 
-	if (was_opened)
-		rndis_filter_open(nvdev);
-	netif_device_attach(ndev);
-
-	/* We may have missed link change notifications */
-	ndevctx->last_reconfig = 0;
-	schedule_delayed_work(&ndevctx->dwork, 0);
+		if (netvsc_attach(ndev, &device_info))
+			netdev_err(ndev, "restoring ringparam failed");
+	}
 
 	return ret;
 }
@@ -2003,8 +2029,8 @@ no_net:
 static int netvsc_remove(struct hv_device *dev)
 {
 	struct net_device_context *ndev_ctx;
-	struct net_device *vf_netdev;
-	struct net_device *net;
+	struct net_device *vf_netdev, *net;
+	struct netvsc_device *nvdev;
 
 	net = hv_get_drvdata(dev);
 	if (net == NULL) {
@@ -2014,10 +2040,14 @@ static int netvsc_remove(struct hv_devic
 
 	ndev_ctx = netdev_priv(net);
 
-	netif_device_detach(net);
-
 	cancel_delayed_work_sync(&ndev_ctx->dwork);
 
+	rcu_read_lock();
+	nvdev = rcu_dereference(ndev_ctx->nvdev);
+
+	if  (nvdev)
+		cancel_work_sync(&nvdev->subchan_work);
+
 	/*
 	 * Call to the vsc driver to let it know that the device is being
 	 * removed. Also blocks mtu and channel changes.
@@ -2027,11 +2057,13 @@ static int netvsc_remove(struct hv_devic
 	if (vf_netdev)
 		netvsc_unregister_vf(vf_netdev);
 
+	if (nvdev)
+		rndis_filter_device_remove(dev, nvdev);
+
 	unregister_netdevice(net);
 
-	rndis_filter_device_remove(dev,
-				   rtnl_dereference(ndev_ctx->nvdev));
 	rtnl_unlock();
+	rcu_read_unlock();
 
 	hv_set_drvdata(dev, NULL);
 
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1112,6 +1112,7 @@ void rndis_set_subchannel(struct work_st
 	for (i = 0; i < VRSS_SEND_TAB_SIZE; i++)
 		ndev_ctx->tx_table[i] = i % nvdev->num_chn;
 
+	netif_device_attach(ndev);
 	rtnl_unlock();
 	return;
 
@@ -1122,6 +1123,8 @@ failed:
 
 	nvdev->max_chn = 1;
 	nvdev->num_chn = 1;
+
+	netif_device_attach(ndev);
 unlock:
 	rtnl_unlock();
 }
@@ -1324,6 +1327,10 @@ out:
 		net_device->num_chn = 1;
 	}
 
+	/* No sub channels, device is ready */
+	if (net_device->num_chn == 1)
+		netif_device_attach(net);
+
 	return net_device;
 
 err_dev_remv:
@@ -1336,9 +1343,6 @@ void rndis_filter_device_remove(struct h
 {
 	struct rndis_device *rndis_dev = net_dev->extension;
 
-	/* Don't try and setup sub channels if about to halt */
-	cancel_work_sync(&net_dev->subchan_work);
-
 	/* Halt and release the rndis device */
 	rndis_filter_halt_device(rndis_dev);
 
@@ -1368,8 +1372,3 @@ int rndis_filter_close(struct netvsc_dev
 
 	return rndis_filter_close_device(nvdev->extension);
 }
-
-bool rndis_filter_opened(const struct netvsc_device *nvdev)
-{
-	return atomic_read(&nvdev->open_cnt) > 0;
-}

[PATCH 4.14 031/165] hv_netvsc: Use Windows version instead of NVSP version on GPAD teardown

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mohammed Gamal <mgamal@redhat.com>

commit 2afc5d61a7197de25a61f54ea4ecfb4cb62b1d42A upstram

When changing network interface settings, Windows guests
older than WS2016 can no longer shutdown. This was addressed
by commit 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order
on older versions"), however the issue also occurs on WS2012
guests that share NVSP protocol versions with WS2016 guests.
Hence we use Windows version directly to differentiate them.

Fixes: 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -569,13 +569,13 @@ void netvsc_device_remove(struct hv_devi
 	netdev_dbg(ndev, "net device safe to remove\n");
 
 	/* older versions require that buffer be revoked before close */
-	if (net_device->nvsp_version < NVSP_PROTOCOL_VERSION_4)
+	if (vmbus_proto_version < VERSION_WIN10)
 		netvsc_teardown_gpadl(device, net_device);
 
 	/* Now, we can close the channel safely */
 	vmbus_close(device->channel);
 
-	if (net_device->nvsp_version >= NVSP_PROTOCOL_VERSION_4)
+	if (vmbus_proto_version >= VERSION_WIN10)
 		netvsc_teardown_gpadl(device, net_device);
 
 	/* Release all resources */

[PATCH 4.14 032/165] hv_netvsc: Split netvsc_revoke_buf() and netvsc_teardown_gpadl()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mohammed Gamal <mgamal@redhat.com>

[ Commit 7992894c305eaf504d005529637ff8283d0a849d upstream. ]

Split each of the functions into two for each of send/recv buffers.
This will be needed in order to implement a fine-grained messaging
sequence to the host so that we accommodate the requirements of
different Windows versions

Fixes: 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |   46 ++++++++++++++++++++++++++++++++------------
 1 file changed, 34 insertions(+), 12 deletions(-)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -105,11 +105,11 @@ static void free_netvsc_device_rcu(struc
 	call_rcu(&nvdev->rcu, free_netvsc_device);
 }
 
-static void netvsc_revoke_buf(struct hv_device *device,
-			      struct netvsc_device *net_device)
+static void netvsc_revoke_recv_buf(struct hv_device *device,
+				   struct netvsc_device *net_device)
 {
-	struct nvsp_message *revoke_packet;
 	struct net_device *ndev = hv_get_drvdata(device);
+	struct nvsp_message *revoke_packet;
 	int ret;
 
 	/*
@@ -151,6 +151,14 @@ static void netvsc_revoke_buf(struct hv_
 		}
 		net_device->recv_section_cnt = 0;
 	}
+}
+
+static void netvsc_revoke_send_buf(struct hv_device *device,
+				   struct netvsc_device *net_device)
+{
+	struct net_device *ndev = hv_get_drvdata(device);
+	struct nvsp_message *revoke_packet;
+	int ret;
 
 	/* Deal with the send buffer we may have setup.
 	 * If we got a  send section size, it means we received a
@@ -194,8 +202,8 @@ static void netvsc_revoke_buf(struct hv_
 	}
 }
 
-static void netvsc_teardown_gpadl(struct hv_device *device,
-				  struct netvsc_device *net_device)
+static void netvsc_teardown_recv_gpadl(struct hv_device *device,
+				       struct netvsc_device *net_device)
 {
 	struct net_device *ndev = hv_get_drvdata(device);
 	int ret;
@@ -214,6 +222,13 @@ static void netvsc_teardown_gpadl(struct
 		}
 		net_device->recv_buf_gpadl_handle = 0;
 	}
+}
+
+static void netvsc_teardown_send_gpadl(struct hv_device *device,
+				       struct netvsc_device *net_device)
+{
+	struct net_device *ndev = hv_get_drvdata(device);
+	int ret;
 
 	if (net_device->send_buf_gpadl_handle) {
 		ret = vmbus_teardown_gpadl(device->channel,
@@ -423,8 +438,10 @@ static int netvsc_init_buf(struct hv_dev
 	goto exit;
 
 cleanup:
-	netvsc_revoke_buf(device, net_device);
-	netvsc_teardown_gpadl(device, net_device);
+	netvsc_revoke_recv_buf(device, net_device);
+	netvsc_revoke_send_buf(device, net_device);
+	netvsc_teardown_recv_gpadl(device, net_device);
+	netvsc_teardown_send_gpadl(device, net_device);
 
 exit:
 	return ret;
@@ -554,7 +571,8 @@ void netvsc_device_remove(struct hv_devi
 		= rtnl_dereference(net_device_ctx->nvdev);
 	int i;
 
-	netvsc_revoke_buf(device, net_device);
+	netvsc_revoke_recv_buf(device, net_device);
+	netvsc_revoke_send_buf(device, net_device);
 
 	RCU_INIT_POINTER(net_device_ctx->nvdev, NULL);
 
@@ -569,14 +587,18 @@ void netvsc_device_remove(struct hv_devi
 	netdev_dbg(ndev, "net device safe to remove\n");
 
 	/* older versions require that buffer be revoked before close */
-	if (vmbus_proto_version < VERSION_WIN10)
-		netvsc_teardown_gpadl(device, net_device);
+	if (vmbus_proto_version < VERSION_WIN10) {
+		netvsc_teardown_recv_gpadl(device, net_device);
+		netvsc_teardown_send_gpadl(device, net_device);
+	}
 
 	/* Now, we can close the channel safely */
 	vmbus_close(device->channel);
 
-	if (vmbus_proto_version >= VERSION_WIN10)
-		netvsc_teardown_gpadl(device, net_device);
+	if (vmbus_proto_version >= VERSION_WIN10) {
+		netvsc_teardown_recv_gpadl(device, net_device);
+		netvsc_teardown_send_gpadl(device, net_device);
+	}
 
 	/* Release all resources */
 	free_netvsc_device_rcu(net_device);

[PATCH 4.14 033/165] hv_netvsc: Ensure correct teardown message sequence order

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mohammed Gamal <mgamal@redhat.com>

[ Commit a56d99d714665591fed8527b90eef21530ea61e0 upstream. ]

Prior to commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split")
the call sequence in netvsc_device_remove() was as follows (as
implemented in netvsc_destroy_buf()):
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Teardown receive buffer GPADL
3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
4- Teardown send buffer GPADL
5- Close vmbus

This didn't work for WS2016 hosts. Commit 0cf737808ae7
("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the
teardown sequence as follows:
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Close vmbus
4- Teardown receive buffer GPADL
5- Teardown send buffer GPADL

That worked well for WS2016 hosts, but it prevented guests on older hosts from
shutting down after changing network settings. Commit 0ef58b0a05c1
("hv_netvsc: change GPAD teardown order on older versions") ensured the
following message sequence for older hosts
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Teardown receive buffer GPADL
4- Teardown send buffer GPADL
5- Close vmbus

However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the
process becomes uninterruptible. On futher analysis it turns out that on tearing
down the receive buffer GPADL the kernel is waiting indefinitely
in vmbus_teardown_gpadl() for a completion to be signaled.

Here is a snippet of where this occurs:
int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
{
        struct vmbus_channel_gpadl_teardown *msg;
        struct vmbus_channel_msginfo *info;
        unsigned long flags;
        int ret;

        info = kmalloc(sizeof(*info) +
                       sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL);
        if (!info)
                return -ENOMEM;

        init_completion(&info->waitevent);
        info->waiting_channel = channel;
[....]
        ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown),
                             true);

        if (ret)
                goto post_msg_err;

        wait_for_completion(&info->waitevent);
[....]
}

The completion is signaled from vmbus_ongpadl_torndown(), which gets called when
the corresponding message is received from the host, which apparently never happens
in that case.
This patch works around the issue by restoring the first mentioned message sequence
for older hosts

Fixes: 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |   19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -571,8 +571,17 @@ void netvsc_device_remove(struct hv_devi
 		= rtnl_dereference(net_device_ctx->nvdev);
 	int i;
 
+	/*
+	 * Revoke receive buffer. If host is pre-Win2016 then tear down
+	 * receive buffer GPADL. Do the same for send buffer.
+	 */
 	netvsc_revoke_recv_buf(device, net_device);
+	if (vmbus_proto_version < VERSION_WIN10)
+		netvsc_teardown_recv_gpadl(device, net_device);
+
 	netvsc_revoke_send_buf(device, net_device);
+	if (vmbus_proto_version < VERSION_WIN10)
+		netvsc_teardown_send_gpadl(device, net_device);
 
 	RCU_INIT_POINTER(net_device_ctx->nvdev, NULL);
 
@@ -586,15 +595,13 @@ void netvsc_device_remove(struct hv_devi
 	 */
 	netdev_dbg(ndev, "net device safe to remove\n");
 
-	/* older versions require that buffer be revoked before close */
-	if (vmbus_proto_version < VERSION_WIN10) {
-		netvsc_teardown_recv_gpadl(device, net_device);
-		netvsc_teardown_send_gpadl(device, net_device);
-	}
-
 	/* Now, we can close the channel safely */
 	vmbus_close(device->channel);
 
+	/*
+	 * If host is Win2016 or higher then we do the GPADL tear down
+	 * here after VMBus is closed.
+	*/
 	if (vmbus_proto_version >= VERSION_WIN10) {
 		netvsc_teardown_recv_gpadl(device, net_device);
 		netvsc_teardown_send_gpadl(device, net_device);

[PATCH 4.14 034/165] hv_netvsc: Fix net device attach on older Windows hosts

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mohammed Gamal <mgamal@redhat.com>

[ Commit 55be9f25be1ca5bda75c39808fc77e42691bc07f upstream. ]

On older windows hosts the net_device instance is returned to
the caller of rndis_filter_device_add() without having the presence
bit set first. This would cause any subsequent calls to network device
operations (e.g. MTU change, channel change) to fail after the device
is detached once, returning -ENODEV.

Instead of returning the device instabce, we take the exit path where
we call netif_device_attach()

Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/rndis_filter.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1276,7 +1276,7 @@ struct netvsc_device *rndis_filter_devic
 		   rndis_device->link_state ? "down" : "up");
 
 	if (net_device->nvsp_version < NVSP_PROTOCOL_VERSION_5)
-		return net_device;
+		goto out;
 
 	rndis_filter_query_link_speed(rndis_device, net_device);
 

[PATCH 4.14 035/165] sparc: vio: use put_device() instead of kfree()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arvind Yadav <arvind.yadav.cs@gmail.com>

[ Upstream commit 00ad691ab140b54ab9f5de5e74cb994f552e8124 ]

Never directly free @dev after calling device_register(), even
if it returned an error. Always use put_device() to give up the
reference initialized.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/kernel/vio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -403,7 +403,7 @@ static struct vio_dev *vio_create_one(st
 	if (err) {
 		printk(KERN_ERR "VIO: Could not register device %s, err=%d\n",
 		       dev_name(&vdev->dev), err);
-		kfree(vdev);
+		put_device(&vdev->dev);
 		return NULL;
 	}
 	if (vdev->dp)

[PATCH 4.14 036/165] ext2: fix a block leak

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit 5aa1437d2d9a068c0334bd7c9dafa8ec4f97f13b upstream.

open file, unlink it, then use ioctl(2) to make it immutable or
append only.  Now close it and watch the blocks *not* freed...

Immutable/append-only checks belong in ->setattr().
Note: the bug is old and backport to anything prior to 737f2e93b972
("ext2: convert to use the new truncate convention") will need
these checks lifted into ext2_setattr().

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext2/inode.c |   10 ----------
 1 file changed, 10 deletions(-)

--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -1261,21 +1261,11 @@ do_indirects:
 
 static void ext2_truncate_blocks(struct inode *inode, loff_t offset)
 {
-	/*
-	 * XXX: it seems like a bug here that we don't allow
-	 * IS_APPEND inode to have blocks-past-i_size trimmed off.
-	 * review and fix this.
-	 *
-	 * Also would be nice to be able to handle IO errors and such,
-	 * but that's probably too much to ask.
-	 */
 	if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
 	    S_ISLNK(inode->i_mode)))
 		return;
 	if (ext2_inode_is_fast_symlink(inode))
 		return;
-	if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
-		return;
 
 	dax_sem_down_write(EXT2_I(inode));
 	__ext2_truncate_blocks(inode, offset);

[PATCH 4.14 037/165] s390: add assembler macros for CPU alternatives

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

[ Upstream commit fba9eb7946251d6e420df3bdf7bc45195be7be9a ]

Add a header with macros usable in assembler files to emit alternative
code sequences. It works analog to the alternatives for inline assmeblies
in C files, with the same restrictions and capabilities.
The syntax is

     ALTERNATIVE "<default instructions sequence>", \
		 "<alternative instructions sequence>", \
		 "<features-bit>"
and

     ALTERNATIVE_2 "<default instructions sequence>", \
		   "<alternative instructions sqeuence #1>", \
		   "<feature-bit #1>",
		   "<alternative instructions sqeuence #2>", \
		   "<feature-bit #2>"

Reviewed-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/include/asm/alternative-asm.h |  108 ++++++++++++++++++++++++++++++++
 1 file changed, 108 insertions(+)
 create mode 100644 arch/s390/include/asm/alternative-asm.h

--- /dev/null
+++ b/arch/s390/include/asm/alternative-asm.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_S390_ALTERNATIVE_ASM_H
+#define _ASM_S390_ALTERNATIVE_ASM_H
+
+#ifdef __ASSEMBLY__
+
+/*
+ * Check the length of an instruction sequence. The length may not be larger
+ * than 254 bytes and it has to be divisible by 2.
+ */
+.macro alt_len_check start,end
+	.if ( \end - \start ) > 254
+	.error "cpu alternatives does not support instructions blocks > 254 bytes\n"
+	.endif
+	.if ( \end - \start ) % 2
+	.error "cpu alternatives instructions length is odd\n"
+	.endif
+.endm
+
+/*
+ * Issue one struct alt_instr descriptor entry (need to put it into
+ * the section .altinstructions, see below). This entry contains
+ * enough information for the alternatives patching code to patch an
+ * instruction. See apply_alternatives().
+ */
+.macro alt_entry orig_start, orig_end, alt_start, alt_end, feature
+	.long	\orig_start - .
+	.long	\alt_start - .
+	.word	\feature
+	.byte	\orig_end - \orig_start
+	.byte	\alt_end - \alt_start
+.endm
+
+/*
+ * Fill up @bytes with nops. The macro emits 6-byte nop instructions
+ * for the bulk of the area, possibly followed by a 4-byte and/or
+ * a 2-byte nop if the size of the area is not divisible by 6.
+ */
+.macro alt_pad_fill bytes
+	.fill	( \bytes ) / 6, 6, 0xc0040000
+	.fill	( \bytes ) % 6 / 4, 4, 0x47000000
+	.fill	( \bytes ) % 6 % 4 / 2, 2, 0x0700
+.endm
+
+/*
+ * Fill up @bytes with nops. If the number of bytes is larger
+ * than 6, emit a jg instruction to branch over all nops, then
+ * fill an area of size (@bytes - 6) with nop instructions.
+ */
+.macro alt_pad bytes
+	.if ( \bytes > 0 )
+	.if ( \bytes > 6 )
+	jg	. + \bytes
+	alt_pad_fill \bytes - 6
+	.else
+	alt_pad_fill \bytes
+	.endif
+	.endif
+.endm
+
+/*
+ * Define an alternative between two instructions. If @feature is
+ * present, early code in apply_alternatives() replaces @oldinstr with
+ * @newinstr. ".skip" directive takes care of proper instruction padding
+ * in case @newinstr is longer than @oldinstr.
+ */
+.macro ALTERNATIVE oldinstr, newinstr, feature
+	.pushsection .altinstr_replacement,"ax"
+770:	\newinstr
+771:	.popsection
+772:	\oldinstr
+773:	alt_len_check 770b, 771b
+	alt_len_check 772b, 773b
+	alt_pad ( ( 771b - 770b ) - ( 773b - 772b ) )
+774:	.pushsection .altinstructions,"a"
+	alt_entry 772b, 774b, 770b, 771b, \feature
+	.popsection
+.endm
+
+/*
+ * Define an alternative between two instructions. If @feature is
+ * present, early code in apply_alternatives() replaces @oldinstr with
+ * @newinstr. ".skip" directive takes care of proper instruction padding
+ * in case @newinstr is longer than @oldinstr.
+ */
+.macro ALTERNATIVE_2 oldinstr, newinstr1, feature1, newinstr2, feature2
+	.pushsection .altinstr_replacement,"ax"
+770:	\newinstr1
+771:	\newinstr2
+772:	.popsection
+773:	\oldinstr
+774:	alt_len_check 770b, 771b
+	alt_len_check 771b, 772b
+	alt_len_check 773b, 774b
+	.if ( 771b - 770b > 772b - 771b )
+	alt_pad ( ( 771b - 770b ) - ( 774b - 773b ) )
+	.else
+	alt_pad ( ( 772b - 771b ) - ( 774b - 773b ) )
+	.endif
+775:	.pushsection .altinstructions,"a"
+	alt_entry 773b, 775b, 770b, 771b,\feature1
+	alt_entry 773b, 775b, 771b, 772b,\feature2
+	.popsection
+.endm
+
+#endif	/*  __ASSEMBLY__  */
+
+#endif /* _ASM_S390_ALTERNATIVE_ASM_H */

[PATCH 4.14 038/165] s390: move expoline assembler macros to a header

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

[ Upstream commit 6dd85fbb87d1d6b87a3b1f02ca28d7b2abd2e7ba ]

To be able to use the expoline branches in different assembler
files move the associated macros from entry.S to a new header
nospec-insn.h.

While we are at it make the macros a bit nicer to use.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/include/asm/nospec-insn.h |  125 ++++++++++++++++++++++++++++++++++++
 arch/s390/kernel/entry.S            |  105 ++++++------------------------
 2 files changed, 149 insertions(+), 81 deletions(-)
 create mode 100644 arch/s390/include/asm/nospec-insn.h

--- /dev/null
+++ b/arch/s390/include/asm/nospec-insn.h
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_S390_NOSPEC_ASM_H
+#define _ASM_S390_NOSPEC_ASM_H
+
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_EXPOLINE
+
+/*
+ * The expoline macros are used to create thunks in the same format
+ * as gcc generates them. The 'comdat' section flag makes sure that
+ * the various thunks are merged into a single copy.
+ */
+	.macro __THUNK_PROLOG_NAME name
+	.pushsection .text.\name,"axG",@progbits,\name,comdat
+	.globl \name
+	.hidden \name
+	.type \name,@function
+\name:
+	.cfi_startproc
+	.endm
+
+	.macro __THUNK_EPILOG
+	.cfi_endproc
+	.popsection
+	.endm
+
+	.macro __THUNK_PROLOG_BR r1,r2
+	__THUNK_PROLOG_NAME __s390x_indirect_jump_r\r2\()use_r\r1
+	.endm
+
+	.macro __THUNK_BR r1,r2
+	jg	__s390x_indirect_jump_r\r2\()use_r\r1
+	.endm
+
+	.macro __THUNK_BRASL r1,r2,r3
+	brasl	\r1,__s390x_indirect_jump_r\r3\()use_r\r2
+	.endm
+
+	.macro	__DECODE_RR expand,reg,ruse
+	.set __decode_fail,1
+	.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \reg,%r\r1
+	.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \ruse,%r\r2
+	\expand \r1,\r2
+	.set __decode_fail,0
+	.endif
+	.endr
+	.endif
+	.endr
+	.if __decode_fail == 1
+	.error "__DECODE_RR failed"
+	.endif
+	.endm
+
+	.macro	__DECODE_RRR expand,rsave,rtarget,ruse
+	.set __decode_fail,1
+	.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \rsave,%r\r1
+	.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \rtarget,%r\r2
+	.irp r3,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \ruse,%r\r3
+	\expand \r1,\r2,\r3
+	.set __decode_fail,0
+	.endif
+	.endr
+	.endif
+	.endr
+	.endif
+	.endr
+	.if __decode_fail == 1
+	.error "__DECODE_RRR failed"
+	.endif
+	.endm
+
+	.macro __THUNK_EX_BR reg,ruse
+#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
+	exrl	0,555f
+	j	.
+#else
+	larl	\ruse,555f
+	ex	0,0(\ruse)
+	j	.
+#endif
+555:	br	\reg
+	.endm
+
+	.macro GEN_BR_THUNK reg,ruse=%r1
+	__DECODE_RR __THUNK_PROLOG_BR,\reg,\ruse
+	__THUNK_EX_BR \reg,\ruse
+	__THUNK_EPILOG
+	.endm
+
+	.macro BR_EX reg,ruse=%r1
+557:	__DECODE_RR __THUNK_BR,\reg,\ruse
+	.pushsection .s390_indirect_branches,"a",@progbits
+	.long	557b-.
+	.popsection
+	.endm
+
+	.macro BASR_EX rsave,rtarget,ruse=%r1
+559:	__DECODE_RRR __THUNK_BRASL,\rsave,\rtarget,\ruse
+	.pushsection .s390_indirect_branches,"a",@progbits
+	.long	559b-.
+	.popsection
+	.endm
+
+#else
+	.macro GEN_BR_THUNK reg,ruse=%r1
+	.endm
+
+	 .macro BR_EX reg,ruse=%r1
+	br	\reg
+	.endm
+
+	.macro BASR_EX rsave,rtarget,ruse=%r1
+	basr	\rsave,\rtarget
+	.endm
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_S390_NOSPEC_ASM_H */
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -25,6 +25,7 @@
 #include <asm/setup.h>
 #include <asm/nmi.h>
 #include <asm/export.h>
+#include <asm/nospec-insn.h>
 
 __PT_R0      =	__PT_GPRS
 __PT_R1      =	__PT_GPRS + 8
@@ -221,67 +222,9 @@ _PIF_WORK	= (_PIF_PER_TRAP | _PIF_SYSCAL
 	.popsection
 	.endm
 
-#ifdef CONFIG_EXPOLINE
-
-	.macro GEN_BR_THUNK name,reg,tmp
-	.section .text.\name,"axG",@progbits,\name,comdat
-	.globl \name
-	.hidden \name
-	.type \name,@function
-\name:
-	.cfi_startproc
-#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
-	exrl	0,0f
-#else
-	larl	\tmp,0f
-	ex	0,0(\tmp)
-#endif
-	j	.
-0:	br	\reg
-	.cfi_endproc
-	.endm
-
-	GEN_BR_THUNK __s390x_indirect_jump_r1use_r9,%r9,%r1
-	GEN_BR_THUNK __s390x_indirect_jump_r1use_r14,%r14,%r1
-	GEN_BR_THUNK __s390x_indirect_jump_r11use_r14,%r14,%r11
-
-	.macro BASR_R14_R9
-0:	brasl	%r14,__s390x_indirect_jump_r1use_r9
-	.pushsection .s390_indirect_branches,"a",@progbits
-	.long	0b-.
-	.popsection
-	.endm
-
-	.macro BR_R1USE_R14
-0:	jg	__s390x_indirect_jump_r1use_r14
-	.pushsection .s390_indirect_branches,"a",@progbits
-	.long	0b-.
-	.popsection
-	.endm
-
-	.macro BR_R11USE_R14
-0:	jg	__s390x_indirect_jump_r11use_r14
-	.pushsection .s390_indirect_branches,"a",@progbits
-	.long	0b-.
-	.popsection
-	.endm
-
-#else	/* CONFIG_EXPOLINE */
-
-	.macro BASR_R14_R9
-	basr	%r14,%r9
-	.endm
-
-	.macro BR_R1USE_R14
-	br	%r14
-	.endm
-
-	.macro BR_R11USE_R14
-	br	%r14
-	.endm
-
-#endif /* CONFIG_EXPOLINE */
-
+	GEN_BR_THUNK %r9
+	GEN_BR_THUNK %r14
+	GEN_BR_THUNK %r14,%r11
 
 	.section .kprobes.text, "ax"
 .Ldummy:
@@ -298,7 +241,7 @@ _PIF_WORK	= (_PIF_PER_TRAP | _PIF_SYSCAL
 ENTRY(__bpon)
 	.globl __bpon
 	BPON
-	BR_R1USE_R14
+	BR_EX	%r14
 
 /*
  * Scheduler resume function, called by switch_to
@@ -325,7 +268,7 @@ ENTRY(__switch_to)
 	TSTMSK	__LC_MACHINE_FLAGS,MACHINE_FLAG_LPP
 	jz	0f
 	.insn	s,0xb2800000,__LC_LPP		# set program parameter
-0:	BR_R1USE_R14
+0:	BR_EX	%r14
 
 .L__critical_start:
 
@@ -392,7 +335,7 @@ sie_exit:
 	xgr	%r5,%r5
 	lmg	%r6,%r14,__SF_GPRS(%r15)	# restore kernel registers
 	lg	%r2,__SF_EMPTY+16(%r15)		# return exit reason code
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lsie_fault:
 	lghi	%r14,-EFAULT
 	stg	%r14,__SF_EMPTY+16(%r15)	# set exit reason code
@@ -451,7 +394,7 @@ ENTRY(system_call)
 	lgf	%r9,0(%r8,%r10)			# get system call add.
 	TSTMSK	__TI_flags(%r12),_TIF_TRACE
 	jnz	.Lsysc_tracesys
-	BASR_R14_R9				# call sys_xxxx
+	BASR_EX	%r14,%r9			# call sys_xxxx
 	stg	%r2,__PT_R2(%r11)		# store return value
 
 .Lsysc_return:
@@ -628,7 +571,7 @@ ENTRY(system_call)
 	lmg	%r3,%r7,__PT_R3(%r11)
 	stg	%r7,STACK_FRAME_OVERHEAD(%r15)
 	lg	%r2,__PT_ORIG_GPR2(%r11)
-	BASR_R14_R9			# call sys_xxx
+	BASR_EX	%r14,%r9		# call sys_xxx
 	stg	%r2,__PT_R2(%r11)	# store return value
 .Lsysc_tracenogo:
 	TSTMSK	__TI_flags(%r12),_TIF_TRACE
@@ -652,7 +595,7 @@ ENTRY(ret_from_fork)
 	lmg	%r9,%r10,__PT_R9(%r11)	# load gprs
 ENTRY(kernel_thread_starter)
 	la	%r2,0(%r10)
-	BASR_R14_R9
+	BASR_EX	%r14,%r9
 	j	.Lsysc_tracenogo
 
 /*
@@ -731,7 +674,7 @@ ENTRY(pgm_check_handler)
 	je	.Lpgm_return
 	lgf	%r9,0(%r10,%r1)		# load address of handler routine
 	lgr	%r2,%r11		# pass pointer to pt_regs
-	BASR_R14_R9			# branch to interrupt-handler
+	BASR_EX	%r14,%r9		# branch to interrupt-handler
 .Lpgm_return:
 	LOCKDEP_SYS_EXIT
 	tm	__PT_PSW+1(%r11),0x01	# returning to user ?
@@ -1041,7 +984,7 @@ ENTRY(psw_idle)
 	stpt	__TIMER_IDLE_ENTER(%r2)
 .Lpsw_idle_lpsw:
 	lpswe	__SF_EMPTY(%r15)
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lpsw_idle_end:
 
 /*
@@ -1083,7 +1026,7 @@ ENTRY(save_fpu_regs)
 .Lsave_fpu_regs_done:
 	oi	__LC_CPU_FLAGS+7,_CIF_FPU
 .Lsave_fpu_regs_exit:
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lsave_fpu_regs_end:
 EXPORT_SYMBOL(save_fpu_regs)
 
@@ -1129,7 +1072,7 @@ load_fpu_regs:
 .Lload_fpu_regs_done:
 	ni	__LC_CPU_FLAGS+7,255-_CIF_FPU
 .Lload_fpu_regs_exit:
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lload_fpu_regs_end:
 
 .L__critical_end:
@@ -1301,7 +1244,7 @@ cleanup_critical:
 	jl	0f
 	clg	%r9,BASED(.Lcleanup_table+104)	# .Lload_fpu_regs_end
 	jl	.Lcleanup_load_fpu_regs
-0:	BR_R11USE_R14
+0:	BR_EX	%r14
 
 	.align	8
 .Lcleanup_table:
@@ -1337,7 +1280,7 @@ cleanup_critical:
 	ni	__SIE_PROG0C+3(%r9),0xfe	# no longer in SIE
 	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
 	larl	%r9,sie_exit			# skip forward to sie_exit
-	BR_R11USE_R14
+	BR_EX	%r14
 #endif
 
 .Lcleanup_system_call:
@@ -1391,7 +1334,7 @@ cleanup_critical:
 	stg	%r15,56(%r11)		# r15 stack pointer
 	# set new psw address and exit
 	larl	%r9,.Lsysc_do_svc
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_system_call_insn:
 	.quad	system_call
 	.quad	.Lsysc_stmg
@@ -1403,7 +1346,7 @@ cleanup_critical:
 
 .Lcleanup_sysc_tif:
 	larl	%r9,.Lsysc_tif
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 .Lcleanup_sysc_restore:
 	# check if stpt has been executed
@@ -1420,14 +1363,14 @@ cleanup_critical:
 	mvc	0(64,%r11),__PT_R8(%r9)
 	lmg	%r0,%r7,__PT_R0(%r9)
 1:	lmg	%r8,%r9,__LC_RETURN_PSW
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_sysc_restore_insn:
 	.quad	.Lsysc_exit_timer
 	.quad	.Lsysc_done - 4
 
 .Lcleanup_io_tif:
 	larl	%r9,.Lio_tif
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 .Lcleanup_io_restore:
 	# check if stpt has been executed
@@ -1441,7 +1384,7 @@ cleanup_critical:
 	mvc	0(64,%r11),__PT_R8(%r9)
 	lmg	%r0,%r7,__PT_R0(%r9)
 1:	lmg	%r8,%r9,__LC_RETURN_PSW
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_io_restore_insn:
 	.quad	.Lio_exit_timer
 	.quad	.Lio_done - 4
@@ -1494,17 +1437,17 @@ cleanup_critical:
 	# prepare return psw
 	nihh	%r8,0xfcfd		# clear irq & wait state bits
 	lg	%r9,48(%r11)		# return from psw_idle
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_idle_insn:
 	.quad	.Lpsw_idle_lpsw
 
 .Lcleanup_save_fpu_regs:
 	larl	%r9,save_fpu_regs
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 .Lcleanup_load_fpu_regs:
 	larl	%r9,load_fpu_regs
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 /*
  * Integer constants

[PATCH 4.14 039/165] s390/crc32-vx: use expoline for indirect branches

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

[ Upstream commit 467a3bf219cee12259182c5cb4821f88fd518a51 ]

The return from the crc32_le_vgfm_16/crc32c_le_vgfm_16 and the
crc32_be_vgfm_16 functions are done with "br %r14". These are indirect
branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/crypto/crc32be-vx.S |    5 ++++-
 arch/s390/crypto/crc32le-vx.S |    4 +++-
 2 files changed, 7 insertions(+), 2 deletions(-)

--- a/arch/s390/crypto/crc32be-vx.S
+++ b/arch/s390/crypto/crc32be-vx.S
@@ -13,6 +13,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/nospec-insn.h>
 #include <asm/vx-insn.h>
 
 /* Vector register range containing CRC-32 constants */
@@ -67,6 +68,8 @@
 
 .previous
 
+	GEN_BR_THUNK %r14
+
 .text
 /*
  * The CRC-32 function(s) use these calling conventions:
@@ -203,6 +206,6 @@ ENTRY(crc32_be_vgfm_16)
 
 .Ldone:
 	VLGVF	%r2,%v2,3
-	br	%r14
+	BR_EX	%r14
 
 .previous
--- a/arch/s390/crypto/crc32le-vx.S
+++ b/arch/s390/crypto/crc32le-vx.S
@@ -14,6 +14,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/nospec-insn.h>
 #include <asm/vx-insn.h>
 
 /* Vector register range containing CRC-32 constants */
@@ -76,6 +77,7 @@
 
 .previous
 
+	GEN_BR_THUNK %r14
 
 .text
 
@@ -264,6 +266,6 @@ crc32_le_vgfm_generic:
 
 .Ldone:
 	VLGVF	%r2,%v2,2
-	br	%r14
+	BR_EX	%r14
 
 .previous

[PATCH 4.14 040/165] s390/lib: use expoline for indirect branches

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

[ Upstream commit 97489e0663fa700d6e7febddc43b58df98d7bcda ]

The return from the memmove, memset, memcpy, __memset16, __memset32 and
__memset64 functions are done with "br %r14". These are indirect branches
as well and need to use execute trampolines for CONFIG_EXPOLINE=y.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/lib/mem.S |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/arch/s390/lib/mem.S
+++ b/arch/s390/lib/mem.S
@@ -7,6 +7,9 @@
 
 #include <linux/linkage.h>
 #include <asm/export.h>
+#include <asm/nospec-insn.h>
+
+	GEN_BR_THUNK %r14
 
 /*
  * void *memmove(void *dest, const void *src, size_t n)
@@ -33,14 +36,14 @@ ENTRY(memmove)
 .Lmemmove_forward_remainder:
 	larl	%r5,.Lmemmove_mvc
 	ex	%r4,0(%r5)
-	br	%r14
+	BR_EX	%r14
 .Lmemmove_reverse:
 	ic	%r0,0(%r4,%r3)
 	stc	%r0,0(%r4,%r1)
 	brctg	%r4,.Lmemmove_reverse
 	ic	%r0,0(%r4,%r3)
 	stc	%r0,0(%r4,%r1)
-	br	%r14
+	BR_EX	%r14
 .Lmemmove_mvc:
 	mvc	0(1,%r1),0(%r3)
 EXPORT_SYMBOL(memmove)
@@ -77,7 +80,7 @@ ENTRY(memset)
 .Lmemset_clear_remainder:
 	larl	%r3,.Lmemset_xc
 	ex	%r4,0(%r3)
-	br	%r14
+	BR_EX	%r14
 .Lmemset_fill:
 	stc	%r3,0(%r2)
 	cghi	%r4,1
@@ -94,7 +97,7 @@ ENTRY(memset)
 .Lmemset_fill_remainder:
 	larl	%r3,.Lmemset_mvc
 	ex	%r4,0(%r3)
-	br	%r14
+	BR_EX	%r14
 .Lmemset_xc:
 	xc	0(1,%r1),0(%r1)
 .Lmemset_mvc:
@@ -117,7 +120,7 @@ ENTRY(memcpy)
 .Lmemcpy_remainder:
 	larl	%r5,.Lmemcpy_mvc
 	ex	%r4,0(%r5)
-	br	%r14
+	BR_EX	%r14
 .Lmemcpy_loop:
 	mvc	0(256,%r1),0(%r3)
 	la	%r1,256(%r1)

[PATCH 4.14 041/165] s390/ftrace: use expoline for indirect branches

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

[ Upstream commit 23a4d7fd34856da8218c4cfc23dba7a6ec0a423a ]

The return from the ftrace_stub, _mcount, ftrace_caller and
return_to_handler functions is done with "br %r14" and "br %r1".
These are indirect branches as well and need to use execute
trampolines for CONFIG_EXPOLINE=y.

The ftrace_caller function is a special case as it returns to the
start of a function and may only use %r0 and %r1. For a pre z10
machine the standard execute trampoline uses a LARL + EX to do
this, but this requires *two* registers in the range %r1..%r15.
To get around this the 'br %r1' located in the lowcore is used,
then the EX instruction does not need an address register.
But the lowcore trick may only be used for pre z14 machines,
with noexec=on the mapping for the first page may not contain
instructions. The solution for that is an ALTERNATIVE in the
expoline THUNK generated by 'GEN_BR_THUNK %r1' to switch to
EXRL, this relies on the fact that a machine that supports
noexec=on has EXRL as well.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/include/asm/nospec-insn.h |   13 +++++++++++++
 arch/s390/kernel/asm-offsets.c      |    1 +
 arch/s390/kernel/mcount.S           |   14 +++++++++-----
 3 files changed, 23 insertions(+), 5 deletions(-)

--- a/arch/s390/include/asm/nospec-insn.h
+++ b/arch/s390/include/asm/nospec-insn.h
@@ -2,10 +2,15 @@
 #ifndef _ASM_S390_NOSPEC_ASM_H
 #define _ASM_S390_NOSPEC_ASM_H
 
+#include <asm/alternative-asm.h>
+#include <asm/asm-offsets.h>
+
 #ifdef __ASSEMBLY__
 
 #ifdef CONFIG_EXPOLINE
 
+_LC_BR_R1 = __LC_BR_R1
+
 /*
  * The expoline macros are used to create thunks in the same format
  * as gcc generates them. The 'comdat' section flag makes sure that
@@ -76,13 +81,21 @@
 	.endm
 
 	.macro __THUNK_EX_BR reg,ruse
+	# Be very careful when adding instructions to this macro!
+	# The ALTERNATIVE replacement code has a .+10 which targets
+	# the "br \reg" after the code has been patched.
 #ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
 	exrl	0,555f
 	j	.
 #else
+	.ifc \reg,%r1
+	ALTERNATIVE "ex %r0,_LC_BR_R1", ".insn ril,0xc60000000000,0,.+10", 35
+	j	.
+	.else
 	larl	\ruse,555f
 	ex	0,0(\ruse)
 	j	.
+	.endif
 #endif
 555:	br	\reg
 	.endm
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -177,6 +177,7 @@ int main(void)
 	OFFSET(__LC_PREEMPT_COUNT, lowcore, preempt_count);
 	OFFSET(__LC_GMAP, lowcore, gmap);
 	OFFSET(__LC_PASTE, lowcore, paste);
+	OFFSET(__LC_BR_R1, lowcore, br_r1_trampoline);
 	/* software defined ABI-relevant lowcore locations 0xe00 - 0xe20 */
 	OFFSET(__LC_DUMP_REIPL, lowcore, ipib);
 	/* hardware defined lowcore locations 0x1000 - 0x18ff */
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -9,13 +9,17 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/ftrace.h>
+#include <asm/nospec-insn.h>
 #include <asm/ptrace.h>
 #include <asm/export.h>
 
+	GEN_BR_THUNK %r1
+	GEN_BR_THUNK %r14
+
 	.section .kprobes.text, "ax"
 
 ENTRY(ftrace_stub)
-	br	%r14
+	BR_EX	%r14
 
 #define STACK_FRAME_SIZE  (STACK_FRAME_OVERHEAD + __PT_SIZE)
 #define STACK_PTREGS	  (STACK_FRAME_OVERHEAD)
@@ -23,7 +27,7 @@ ENTRY(ftrace_stub)
 #define STACK_PTREGS_PSW  (STACK_PTREGS + __PT_PSW)
 
 ENTRY(_mcount)
-	br	%r14
+	BR_EX	%r14
 
 EXPORT_SYMBOL(_mcount)
 
@@ -53,7 +57,7 @@ ENTRY(ftrace_caller)
 #endif
 	lgr	%r3,%r14
 	la	%r5,STACK_PTREGS(%r15)
-	basr	%r14,%r1
+	BASR_EX	%r14,%r1
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 # The j instruction gets runtime patched to a nop instruction.
 # See ftrace_enable_ftrace_graph_caller.
@@ -68,7 +72,7 @@ ftrace_graph_caller_end:
 #endif
 	lg	%r1,(STACK_PTREGS_PSW+8)(%r15)
 	lmg	%r2,%r15,(STACK_PTREGS_GPRS+2*8)(%r15)
-	br	%r1
+	BR_EX	%r1
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
@@ -81,6 +85,6 @@ ENTRY(return_to_handler)
 	aghi	%r15,STACK_FRAME_OVERHEAD
 	lgr	%r14,%r2
 	lmg	%r2,%r5,32(%r15)
-	br	%r14
+	BR_EX	%r14
 
 #endif

[PATCH 4.14 042/165] s390/kernel: use expoline for indirect branches

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

[ Upstream commit c50c84c3ac4d5db683904bdb3257798b6ef980ae ]

The assember code in arch/s390/kernel uses a few more indirect branches
which need to be done with execute trampolines for CONFIG_EXPOLINE=y.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/kernel/base.S   |   24 ++++++++++++++----------
 arch/s390/kernel/reipl.S  |    7 +++++--
 arch/s390/kernel/swsusp.S |   10 ++++++----
 3 files changed, 25 insertions(+), 16 deletions(-)

--- a/arch/s390/kernel/base.S
+++ b/arch/s390/kernel/base.S
@@ -9,18 +9,22 @@
 
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
+#include <asm/nospec-insn.h>
 #include <asm/ptrace.h>
 #include <asm/sigp.h>
 
+	GEN_BR_THUNK %r9
+	GEN_BR_THUNK %r14
+
 ENTRY(s390_base_mcck_handler)
 	basr	%r13,0
 0:	lg	%r15,__LC_PANIC_STACK	# load panic stack
 	aghi	%r15,-STACK_FRAME_OVERHEAD
 	larl	%r1,s390_base_mcck_handler_fn
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
+	lg	%r9,0(%r1)
+	ltgr	%r9,%r9
 	jz	1f
-	basr	%r14,%r1
+	BASR_EX	%r14,%r9
 1:	la	%r1,4095
 	lmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
 	lpswe	__LC_MCK_OLD_PSW
@@ -37,10 +41,10 @@ ENTRY(s390_base_ext_handler)
 	basr	%r13,0
 0:	aghi	%r15,-STACK_FRAME_OVERHEAD
 	larl	%r1,s390_base_ext_handler_fn
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
+	lg	%r9,0(%r1)
+	ltgr	%r9,%r9
 	jz	1f
-	basr	%r14,%r1
+	BASR_EX	%r14,%r9
 1:	lmg	%r0,%r15,__LC_SAVE_AREA_ASYNC
 	ni	__LC_EXT_OLD_PSW+1,0xfd	# clear wait state bit
 	lpswe	__LC_EXT_OLD_PSW
@@ -57,10 +61,10 @@ ENTRY(s390_base_pgm_handler)
 	basr	%r13,0
 0:	aghi	%r15,-STACK_FRAME_OVERHEAD
 	larl	%r1,s390_base_pgm_handler_fn
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
+	lg	%r9,0(%r1)
+	ltgr	%r9,%r9
 	jz	1f
-	basr	%r14,%r1
+	BASR_EX	%r14,%r9
 	lmg	%r0,%r15,__LC_SAVE_AREA_SYNC
 	lpswe	__LC_PGM_OLD_PSW
 1:	lpswe	disabled_wait_psw-0b(%r13)
@@ -117,7 +121,7 @@ ENTRY(diag308_reset)
 	larl	%r4,.Lcontinue_psw	# Restore PSW flags
 	lpswe	0(%r4)
 .Lcontinue:
-	br	%r14
+	BR_EX	%r14
 .align 16
 .Lrestart_psw:
 	.long	0x00080000,0x80000000 + .Lrestart_part2
--- a/arch/s390/kernel/reipl.S
+++ b/arch/s390/kernel/reipl.S
@@ -7,8 +7,11 @@
 
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
+#include <asm/nospec-insn.h>
 #include <asm/sigp.h>
 
+	GEN_BR_THUNK %r9
+
 #
 # Issue "store status" for the current CPU to its prefix page
 # and call passed function afterwards
@@ -67,9 +70,9 @@ ENTRY(store_status)
 	st	%r4,0(%r1)
 	st	%r5,4(%r1)
 	stg	%r2,8(%r1)
-	lgr	%r1,%r2
+	lgr	%r9,%r2
 	lgr	%r2,%r3
-	br	%r1
+	BR_EX	%r9
 
 	.section .bss
 	.align	8
--- a/arch/s390/kernel/swsusp.S
+++ b/arch/s390/kernel/swsusp.S
@@ -13,6 +13,7 @@
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
+#include <asm/nospec-insn.h>
 #include <asm/sigp.h>
 
 /*
@@ -24,6 +25,8 @@
  * (see below) in the resume process.
  * This function runs with disabled interrupts.
  */
+	GEN_BR_THUNK %r14
+
 	.section .text
 ENTRY(swsusp_arch_suspend)
 	stmg	%r6,%r15,__SF_GPRS(%r15)
@@ -103,7 +106,7 @@ ENTRY(swsusp_arch_suspend)
 	spx	0x318(%r1)
 	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
 	lghi	%r2,0
-	br	%r14
+	BR_EX	%r14
 
 /*
  * Restore saved memory image to correct place and restore register context.
@@ -197,11 +200,10 @@ pgm_check_entry:
 	larl	%r15,init_thread_union
 	ahi	%r15,1<<(PAGE_SHIFT+THREAD_SIZE_ORDER)
 	larl	%r2,.Lpanic_string
-	larl	%r3,sclp_early_printk
 	lghi	%r1,0
 	sam31
 	sigp	%r1,%r0,SIGP_SET_ARCHITECTURE
-	basr	%r14,%r3
+	brasl	%r14,sclp_early_printk
 	larl	%r3,.Ldisabled_wait_31
 	lpsw	0(%r3)
 4:
@@ -267,7 +269,7 @@ restore_registers:
 	/* Return 0 */
 	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
 	lghi	%r2,0
-	br	%r14
+	BR_EX	%r14
 
 	.section .data..nosave,"aw",@progbits
 	.align	8

[PATCH 4.14 043/165] s390: move spectre sysfs attribute code

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

[ Upstream commit 4253b0e0627ee3461e64c2495c616f1c8f6b127b ]

The nospec-branch.c file is compiled without the gcc options to
generate expoline thunks. The return branch of the sysfs show
functions cpu_show_spectre_v1 and cpu_show_spectre_v2 is an indirect
branch as well. These need to be compiled with expolines.

Move the sysfs functions for spectre reporting to a separate file
and loose an '.' for one of the messages.

Cc: stable@vger.kernel.org # 4.16
Fixes: d424986f1d ("s390: add sysfs attributes for spectre")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/kernel/Makefile        |    1 +
 arch/s390/kernel/nospec-branch.c |   18 ------------------
 arch/s390/kernel/nospec-sysfs.c  |   21 +++++++++++++++++++++
 3 files changed, 22 insertions(+), 18 deletions(-)
 create mode 100644 arch/s390/kernel/nospec-sysfs.c

--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -63,6 +63,7 @@ obj-y	+= nospec-branch.o
 
 extra-y				+= head.o head64.o vmlinux.lds
 
+obj-$(CONFIG_SYSFS)		+= nospec-sysfs.o
 CFLAGS_REMOVE_nospec-branch.o	+= $(CC_FLAGS_EXPOLINE)
 
 obj-$(CONFIG_MODULES)		+= module.o
--- a/arch/s390/kernel/nospec-branch.c
+++ b/arch/s390/kernel/nospec-branch.c
@@ -44,24 +44,6 @@ static int __init nospec_report(void)
 }
 arch_initcall(nospec_report);
 
-#ifdef CONFIG_SYSFS
-ssize_t cpu_show_spectre_v1(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
-}
-
-ssize_t cpu_show_spectre_v2(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable)
-		return sprintf(buf, "Mitigation: execute trampolines\n");
-	if (__test_facility(82, S390_lowcore.alt_stfle_fac_list))
-		return sprintf(buf, "Mitigation: limited branch prediction.\n");
-	return sprintf(buf, "Vulnerable\n");
-}
-#endif
-
 #ifdef CONFIG_EXPOLINE
 
 int nospec_disable = IS_ENABLED(CONFIG_EXPOLINE_OFF);
--- /dev/null
+++ b/arch/s390/kernel/nospec-sysfs.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <asm/facility.h>
+#include <asm/nospec-branch.h>
+
+ssize_t cpu_show_spectre_v1(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable)
+		return sprintf(buf, "Mitigation: execute trampolines\n");
+	if (__test_facility(82, S390_lowcore.alt_stfle_fac_list))
+		return sprintf(buf, "Mitigation: limited branch prediction\n");
+	return sprintf(buf, "Vulnerable\n");
+}

[PATCH 4.14 044/165] s390: extend expoline to BC instructions

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

[ Upstream commit 6deaa3bbca804b2a3627fd685f75de64da7be535 ]

The BPF JIT uses a 'b <disp>(%r<x>)' instruction in the definition
of the sk_load_word and sk_load_half functions.

Add support for branch-on-condition instructions contained in the
thunk code of an expoline.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/include/asm/nospec-insn.h |   57 ++++++++++++++++++++++++++++++++++++
 arch/s390/kernel/nospec-branch.c    |   25 ++++++++++++---
 2 files changed, 77 insertions(+), 5 deletions(-)

--- a/arch/s390/include/asm/nospec-insn.h
+++ b/arch/s390/include/asm/nospec-insn.h
@@ -34,10 +34,18 @@ _LC_BR_R1 = __LC_BR_R1
 	__THUNK_PROLOG_NAME __s390x_indirect_jump_r\r2\()use_r\r1
 	.endm
 
+	.macro __THUNK_PROLOG_BC d0,r1,r2
+	__THUNK_PROLOG_NAME __s390x_indirect_branch_\d0\()_\r2\()use_\r1
+	.endm
+
 	.macro __THUNK_BR r1,r2
 	jg	__s390x_indirect_jump_r\r2\()use_r\r1
 	.endm
 
+	.macro __THUNK_BC d0,r1,r2
+	jg	__s390x_indirect_branch_\d0\()_\r2\()use_\r1
+	.endm
+
 	.macro __THUNK_BRASL r1,r2,r3
 	brasl	\r1,__s390x_indirect_jump_r\r3\()use_r\r2
 	.endm
@@ -80,6 +88,23 @@ _LC_BR_R1 = __LC_BR_R1
 	.endif
 	.endm
 
+	.macro	__DECODE_DRR expand,disp,reg,ruse
+	.set __decode_fail,1
+	.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \reg,%r\r1
+	.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \ruse,%r\r2
+	\expand \disp,\r1,\r2
+	.set __decode_fail,0
+	.endif
+	.endr
+	.endif
+	.endr
+	.if __decode_fail == 1
+	.error "__DECODE_DRR failed"
+	.endif
+	.endm
+
 	.macro __THUNK_EX_BR reg,ruse
 	# Be very careful when adding instructions to this macro!
 	# The ALTERNATIVE replacement code has a .+10 which targets
@@ -100,12 +125,30 @@ _LC_BR_R1 = __LC_BR_R1
 555:	br	\reg
 	.endm
 
+	.macro __THUNK_EX_BC disp,reg,ruse
+#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
+	exrl	0,556f
+	j	.
+#else
+	larl	\ruse,556f
+	ex	0,0(\ruse)
+	j	.
+#endif
+556:	b	\disp(\reg)
+	.endm
+
 	.macro GEN_BR_THUNK reg,ruse=%r1
 	__DECODE_RR __THUNK_PROLOG_BR,\reg,\ruse
 	__THUNK_EX_BR \reg,\ruse
 	__THUNK_EPILOG
 	.endm
 
+	.macro GEN_B_THUNK disp,reg,ruse=%r1
+	__DECODE_DRR __THUNK_PROLOG_BC,\disp,\reg,\ruse
+	__THUNK_EX_BC \disp,\reg,\ruse
+	__THUNK_EPILOG
+	.endm
+
 	.macro BR_EX reg,ruse=%r1
 557:	__DECODE_RR __THUNK_BR,\reg,\ruse
 	.pushsection .s390_indirect_branches,"a",@progbits
@@ -113,6 +156,13 @@ _LC_BR_R1 = __LC_BR_R1
 	.popsection
 	.endm
 
+	 .macro B_EX disp,reg,ruse=%r1
+558:	__DECODE_DRR __THUNK_BC,\disp,\reg,\ruse
+	.pushsection .s390_indirect_branches,"a",@progbits
+	.long	558b-.
+	.popsection
+	.endm
+
 	.macro BASR_EX rsave,rtarget,ruse=%r1
 559:	__DECODE_RRR __THUNK_BRASL,\rsave,\rtarget,\ruse
 	.pushsection .s390_indirect_branches,"a",@progbits
@@ -124,10 +174,17 @@ _LC_BR_R1 = __LC_BR_R1
 	.macro GEN_BR_THUNK reg,ruse=%r1
 	.endm
 
+	.macro GEN_B_THUNK disp,reg,ruse=%r1
+	.endm
+
 	 .macro BR_EX reg,ruse=%r1
 	br	\reg
 	.endm
 
+	 .macro B_EX disp,reg,ruse=%r1
+	b	\disp(\reg)
+	.endm
+
 	.macro BASR_EX rsave,rtarget,ruse=%r1
 	basr	\rsave,\rtarget
 	.endm
--- a/arch/s390/kernel/nospec-branch.c
+++ b/arch/s390/kernel/nospec-branch.c
@@ -94,7 +94,6 @@ static void __init_or_module __nospec_re
 	s32 *epo;
 
 	/* Second part of the instruction replace is always a nop */
-	memcpy(insnbuf + 2, (char[]) { 0x47, 0x00, 0x00, 0x00 }, 4);
 	for (epo = start; epo < end; epo++) {
 		instr = (u8 *) epo + *epo;
 		if (instr[0] == 0xc0 && (instr[1] & 0x0f) == 0x04)
@@ -115,18 +114,34 @@ static void __init_or_module __nospec_re
 			br = thunk + (*(int *)(thunk + 2)) * 2;
 		else
 			continue;
-		if (br[0] != 0x07 || (br[1] & 0xf0) != 0xf0)
+		/* Check for unconditional branch 0x07f? or 0x47f???? */
+		if ((br[0] & 0xbf) != 0x07 || (br[1] & 0xf0) != 0xf0)
 			continue;
+
+		memcpy(insnbuf + 2, (char[]) { 0x47, 0x00, 0x07, 0x00 }, 4);
 		switch (type) {
 		case BRCL_EXPOLINE:
-			/* brcl to thunk, replace with br + nop */
 			insnbuf[0] = br[0];
 			insnbuf[1] = (instr[1] & 0xf0) | (br[1] & 0x0f);
+			if (br[0] == 0x47) {
+				/* brcl to b, replace with bc + nopr */
+				insnbuf[2] = br[2];
+				insnbuf[3] = br[3];
+			} else {
+				/* brcl to br, replace with bcr + nop */
+			}
 			break;
 		case BRASL_EXPOLINE:
-			/* brasl to thunk, replace with basr + nop */
-			insnbuf[0] = 0x0d;
 			insnbuf[1] = (instr[1] & 0xf0) | (br[1] & 0x0f);
+			if (br[0] == 0x47) {
+				/* brasl to b, replace with bas + nopr */
+				insnbuf[0] = 0x4d;
+				insnbuf[2] = br[2];
+				insnbuf[3] = br[3];
+			} else {
+				/* brasl to br, replace with basr + nop */
+				insnbuf[0] = 0x0d;
+			}
 			break;
 		}
 

[PATCH 4.14 045/165] s390: use expoline thunks in the BPF JIT

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

[ Upstream commit de5cb6eb514ebe241e3edeb290cb41deb380b81d ]

The BPF JIT need safe guarding against spectre v2 in the sk_load_xxx
assembler stubs and the indirect branches generated by the JIT itself
need to be converted to expolines.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/net/bpf_jit.S      |   16 ++++++----
 arch/s390/net/bpf_jit_comp.c |   63 +++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 71 insertions(+), 8 deletions(-)

--- a/arch/s390/net/bpf_jit.S
+++ b/arch/s390/net/bpf_jit.S
@@ -9,6 +9,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/nospec-insn.h>
 #include "bpf_jit.h"
 
 /*
@@ -54,7 +55,7 @@ ENTRY(sk_load_##NAME##_pos);						\
 	clg	%r3,STK_OFF_HLEN(%r15);	/* Offset + SIZE > hlen? */	\
 	jh	sk_load_##NAME##_slow;					\
 	LOAD	%r14,-SIZE(%r3,%r12);	/* Get data from skb */		\
-	b	OFF_OK(%r6);		/* Return */			\
+	B_EX	OFF_OK,%r6;		/* Return */			\
 									\
 sk_load_##NAME##_slow:;							\
 	lgr	%r2,%r7;		/* Arg1 = skb pointer */	\
@@ -64,11 +65,14 @@ sk_load_##NAME##_slow:;							\
 	brasl	%r14,skb_copy_bits;	/* Get data from skb */		\
 	LOAD	%r14,STK_OFF_TMP(%r15);	/* Load from temp bufffer */	\
 	ltgr	%r2,%r2;		/* Set cc to (%r2 != 0) */	\
-	br	%r6;			/* Return */
+	BR_EX	%r6;			/* Return */
 
 sk_load_common(word, 4, llgf)	/* r14 = *(u32 *) (skb->data+offset) */
 sk_load_common(half, 2, llgh)	/* r14 = *(u16 *) (skb->data+offset) */
 
+	GEN_BR_THUNK %r6
+	GEN_B_THUNK OFF_OK,%r6
+
 /*
  * Load 1 byte from SKB (optimized version)
  */
@@ -80,7 +84,7 @@ ENTRY(sk_load_byte_pos)
 	clg	%r3,STK_OFF_HLEN(%r15)	# Offset >= hlen?
 	jnl	sk_load_byte_slow
 	llgc	%r14,0(%r3,%r12)	# Get byte from skb
-	b	OFF_OK(%r6)		# Return OK
+	B_EX	OFF_OK,%r6		# Return OK
 
 sk_load_byte_slow:
 	lgr	%r2,%r7			# Arg1 = skb pointer
@@ -90,7 +94,7 @@ sk_load_byte_slow:
 	brasl	%r14,skb_copy_bits	# Get data from skb
 	llgc	%r14,STK_OFF_TMP(%r15)	# Load result from temp buffer
 	ltgr	%r2,%r2			# Set cc to (%r2 != 0)
-	br	%r6			# Return cc
+	BR_EX	%r6			# Return cc
 
 #define sk_negative_common(NAME, SIZE, LOAD)				\
 sk_load_##NAME##_slow_neg:;						\
@@ -104,7 +108,7 @@ sk_load_##NAME##_slow_neg:;						\
 	jz	bpf_error;						\
 	LOAD	%r14,0(%r2);		/* Get data from pointer */	\
 	xr	%r3,%r3;		/* Set cc to zero */		\
-	br	%r6;			/* Return cc */
+	BR_EX	%r6;			/* Return cc */
 
 sk_negative_common(word, 4, llgf)
 sk_negative_common(half, 2, llgh)
@@ -113,4 +117,4 @@ sk_negative_common(byte, 1, llgc)
 bpf_error:
 # force a return 0 from jit handler
 	ltgr	%r15,%r15	# Set condition code
-	br	%r6
+	BR_EX	%r6
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -25,6 +25,8 @@
 #include <linux/bpf.h>
 #include <asm/cacheflush.h>
 #include <asm/dis.h>
+#include <asm/facility.h>
+#include <asm/nospec-branch.h>
 #include <asm/set_memory.h>
 #include "bpf_jit.h"
 
@@ -43,6 +45,8 @@ struct bpf_jit {
 	int base_ip;		/* Base address for literal pool */
 	int ret0_ip;		/* Address of return 0 */
 	int exit_ip;		/* Address of exit */
+	int r1_thunk_ip;	/* Address of expoline thunk for 'br %r1' */
+	int r14_thunk_ip;	/* Address of expoline thunk for 'br %r14' */
 	int tail_call_start;	/* Tail call start offset */
 	int labels[1];		/* Labels for local jumps */
 };
@@ -252,6 +256,19 @@ static inline void reg_set_seen(struct b
 	REG_SET_SEEN(b2);					\
 })
 
+#define EMIT6_PCREL_RILB(op, b, target)				\
+({								\
+	int rel = (target - jit->prg) / 2;			\
+	_EMIT6(op | reg_high(b) << 16 | rel >> 16, rel & 0xffff);	\
+	REG_SET_SEEN(b);					\
+})
+
+#define EMIT6_PCREL_RIL(op, target)				\
+({								\
+	int rel = (target - jit->prg) / 2;			\
+	_EMIT6(op | rel >> 16, rel & 0xffff);			\
+})
+
 #define _EMIT6_IMM(op, imm)					\
 ({								\
 	unsigned int __imm = (imm);				\
@@ -471,8 +488,45 @@ static void bpf_jit_epilogue(struct bpf_
 	EMIT4(0xb9040000, REG_2, BPF_REG_0);
 	/* Restore registers */
 	save_restore_regs(jit, REGS_RESTORE);
+	if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable) {
+		jit->r14_thunk_ip = jit->prg;
+		/* Generate __s390_indirect_jump_r14 thunk */
+		if (test_facility(35)) {
+			/* exrl %r0,.+10 */
+			EMIT6_PCREL_RIL(0xc6000000, jit->prg + 10);
+		} else {
+			/* larl %r1,.+14 */
+			EMIT6_PCREL_RILB(0xc0000000, REG_1, jit->prg + 14);
+			/* ex 0,0(%r1) */
+			EMIT4_DISP(0x44000000, REG_0, REG_1, 0);
+		}
+		/* j . */
+		EMIT4_PCREL(0xa7f40000, 0);
+	}
 	/* br %r14 */
 	_EMIT2(0x07fe);
+
+	if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable &&
+	    (jit->seen & SEEN_FUNC)) {
+		jit->r1_thunk_ip = jit->prg;
+		/* Generate __s390_indirect_jump_r1 thunk */
+		if (test_facility(35)) {
+			/* exrl %r0,.+10 */
+			EMIT6_PCREL_RIL(0xc6000000, jit->prg + 10);
+			/* j . */
+			EMIT4_PCREL(0xa7f40000, 0);
+			/* br %r1 */
+			_EMIT2(0x07f1);
+		} else {
+			/* larl %r1,.+14 */
+			EMIT6_PCREL_RILB(0xc0000000, REG_1, jit->prg + 14);
+			/* ex 0,S390_lowcore.br_r1_tampoline */
+			EMIT4_DISP(0x44000000, REG_0, REG_0,
+				   offsetof(struct lowcore, br_r1_trampoline));
+			/* j . */
+			EMIT4_PCREL(0xa7f40000, 0);
+		}
+	}
 }
 
 /*
@@ -978,8 +1032,13 @@ static noinline int bpf_jit_insn(struct
 		/* lg %w1,<d(imm)>(%l) */
 		EMIT6_DISP_LH(0xe3000000, 0x0004, REG_W1, REG_0, REG_L,
 			      EMIT_CONST_U64(func));
-		/* basr %r14,%w1 */
-		EMIT2(0x0d00, REG_14, REG_W1);
+		if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable) {
+			/* brasl %r14,__s390_indirect_jump_r1 */
+			EMIT6_PCREL_RILB(0xc0050000, REG_14, jit->r1_thunk_ip);
+		} else {
+			/* basr %r14,%w1 */
+			EMIT2(0x0d00, REG_14, REG_W1);
+		}
 		/* lgr %b0,%r2: load return value into %b0 */
 		EMIT4(0xb9040000, BPF_REG_0, REG_2);
 		if ((jit->seen & SEEN_SKB) &&

[PATCH 4.14 046/165] scsi: libsas: defer ata device eh commands to libata

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Yan <yanaijie@huawei.com>

commit 318aaf34f1179b39fa9c30fa0f3288b645beee39 upstream.

When ata device doing EH, some commands still attached with tasks are
not passed to libata when abort failed or recover failed, so libata did
not handle these commands. After these commands done, sas task is freed,
but ata qc is not freed. This will cause ata qc leak and trigger a
warning like below:

WARNING: CPU: 0 PID: 28512 at drivers/ata/libata-eh.c:4037
ata_eh_finish+0xb4/0xcc
CPU: 0 PID: 28512 Comm: kworker/u32:2 Tainted: G     W  OE 4.14.0#1
......
Call trace:
[<ffff0000088b7bd0>] ata_eh_finish+0xb4/0xcc
[<ffff0000088b8420>] ata_do_eh+0xc4/0xd8
[<ffff0000088b8478>] ata_std_error_handler+0x44/0x8c
[<ffff0000088b8068>] ata_scsi_port_error_handler+0x480/0x694
[<ffff000008875fc4>] async_sas_ata_eh+0x4c/0x80
[<ffff0000080f6be8>] async_run_entry_fn+0x4c/0x170
[<ffff0000080ebd70>] process_one_work+0x144/0x390
[<ffff0000080ec100>] worker_thread+0x144/0x418
[<ffff0000080f2c98>] kthread+0x10c/0x138
[<ffff0000080855dc>] ret_from_fork+0x10/0x18

If ata qc leaked too many, ata tag allocation will fail and io blocked
for ever.

As suggested by Dan Williams, defer ata device commands to libata and
merge sas_eh_finish_cmd() with sas_eh_defer_cmd(). libata will handle
ata qcs correctly after this.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: Xiaofei Tan <tanxiaofei@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/libsas/sas_scsi_host.c |   33 +++++++++++++--------------------
 1 file changed, 13 insertions(+), 20 deletions(-)

--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -222,6 +222,7 @@ out_done:
 static void sas_eh_finish_cmd(struct scsi_cmnd *cmd)
 {
 	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(cmd->device->host);
+	struct domain_device *dev = cmd_to_domain_dev(cmd);
 	struct sas_task *task = TO_SAS_TASK(cmd);
 
 	/* At this point, we only get called following an actual abort
@@ -230,6 +231,14 @@ static void sas_eh_finish_cmd(struct scs
 	 */
 	sas_end_task(cmd, task);
 
+	if (dev_is_sata(dev)) {
+		/* defer commands to libata so that libata EH can
+		 * handle ata qcs correctly
+		 */
+		list_move_tail(&cmd->eh_entry, &sas_ha->eh_ata_q);
+		return;
+	}
+
 	/* now finish the command and move it on to the error
 	 * handler done list, this also takes it off the
 	 * error handler pending list.
@@ -237,22 +246,6 @@ static void sas_eh_finish_cmd(struct scs
 	scsi_eh_finish_cmd(cmd, &sas_ha->eh_done_q);
 }
 
-static void sas_eh_defer_cmd(struct scsi_cmnd *cmd)
-{
-	struct domain_device *dev = cmd_to_domain_dev(cmd);
-	struct sas_ha_struct *ha = dev->port->ha;
-	struct sas_task *task = TO_SAS_TASK(cmd);
-
-	if (!dev_is_sata(dev)) {
-		sas_eh_finish_cmd(cmd);
-		return;
-	}
-
-	/* report the timeout to libata */
-	sas_end_task(cmd, task);
-	list_move_tail(&cmd->eh_entry, &ha->eh_ata_q);
-}
-
 static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd)
 {
 	struct scsi_cmnd *cmd, *n;
@@ -260,7 +253,7 @@ static void sas_scsi_clear_queue_lu(stru
 	list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
 		if (cmd->device->sdev_target == my_cmd->device->sdev_target &&
 		    cmd->device->lun == my_cmd->device->lun)
-			sas_eh_defer_cmd(cmd);
+			sas_eh_finish_cmd(cmd);
 	}
 }
 
@@ -630,12 +623,12 @@ static void sas_eh_handle_sas_errors(str
 		case TASK_IS_DONE:
 			SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
 				    task);
-			sas_eh_defer_cmd(cmd);
+			sas_eh_finish_cmd(cmd);
 			continue;
 		case TASK_IS_ABORTED:
 			SAS_DPRINTK("%s: task 0x%p is aborted\n",
 				    __func__, task);
-			sas_eh_defer_cmd(cmd);
+			sas_eh_finish_cmd(cmd);
 			continue;
 		case TASK_IS_AT_LU:
 			SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
@@ -646,7 +639,7 @@ static void sas_eh_handle_sas_errors(str
 					    "recovered\n",
 					    SAS_ADDR(task->dev),
 					    cmd->device->lun);
-				sas_eh_defer_cmd(cmd);
+				sas_eh_finish_cmd(cmd);
 				sas_scsi_clear_queue_lu(work_q, cmd);
 				goto Again;
 			}

[PATCH 4.14 047/165] scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Potapenko <glider@google.com>

commit a45b599ad808c3c982fdcdc12b0b8611c2f92824 upstream.

This shall help avoid copying uninitialized memory to the userspace when
calling ioctl(fd, SG_IO) with an empty command.

Reported-by: syzbot+7d26fc1eea198488deab@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/sg.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1894,7 +1894,7 @@ retry:
 		num = (rem_sz > scatter_elem_sz_prev) ?
 			scatter_elem_sz_prev : rem_sz;
 
-		schp->pages[k] = alloc_pages(gfp_mask, order);
+		schp->pages[k] = alloc_pages(gfp_mask | __GFP_ZERO, order);
 		if (!schp->pages[k])
 			goto out;
 

[PATCH 4.14 048/165] scsi: zfcp: fix infinite iteration on ERP ready list

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Remus <jremus@linux.ibm.com>

commit fa89adba1941e4f3b213399b81732a5c12fd9131 upstream.

zfcp_erp_adapter_reopen() schedules blocking of all of the adapter's
rports via zfcp_scsi_schedule_rports_block() and enqueues a reopen
adapter ERP action via zfcp_erp_action_enqueue(). Both are separately
processed asynchronously and concurrently.

Blocking of rports is done in a kworker by zfcp_scsi_rport_work(). It
calls zfcp_scsi_rport_block(), which then traces a DBF REC "scpdely" via
zfcp_dbf_rec_trig().  zfcp_dbf_rec_trig() acquires the DBF REC spin lock
and then iterates with list_for_each() over the adapter's ERP ready list
without holding the ERP lock. This opens a race window in which the
current list entry can be moved to another list, causing list_for_each()
to iterate forever on the wrong list, as the erp_ready_head is never
encountered as terminal condition.

Meanwhile the ERP action can be processed in the ERP thread by
zfcp_erp_thread(). It calls zfcp_erp_strategy(), which acquires the ERP
lock and then calls zfcp_erp_action_to_running() to move the ERP action
from the ready to the running list.  zfcp_erp_action_to_running() can
move the ERP action using list_move() just during the aforementioned
race window. It then traces a REC RUN "erator1" via zfcp_dbf_rec_run().
zfcp_dbf_rec_run() tries to acquire the DBF REC spin lock. If this is
held by the infinitely looping kworker, it effectively spins forever.

Example Sequence Diagram:

Process                ERP Thread             rport_work
-------------------    -------------------    -------------------
zfcp_erp_adapter_reopen()
zfcp_erp_adapter_block()
zfcp_scsi_schedule_rports_block()
lock ERP                                      zfcp_scsi_rport_work()
zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_ADAPTER)
list_add_tail() on ready                      !(rport_task==RPORT_ADD)
wake_up() ERP thread                          zfcp_scsi_rport_block()
zfcp_dbf_rec_trig()    zfcp_erp_strategy()    zfcp_dbf_rec_trig()
unlock ERP                                    lock DBF REC
zfcp_erp_wait()        lock ERP
|                      zfcp_erp_action_to_running()
|                                             list_for_each() ready
|                      list_move()              current entry
|                        ready to running
|                      zfcp_dbf_rec_run()       endless loop over running
|                      zfcp_dbf_rec_run_lvl()
|                      lock DBF REC spins forever

Any adapter recovery can trigger this, such as setting the device offline
or reboot.

V4.9 commit 4eeaa4f3f1d6 ("zfcp: close window with unblocked rport
during rport gone") introduced additional tracing of (un)blocking of
rports. It missed that the adapter->erp_lock must be held when calling
zfcp_dbf_rec_trig().

This fix uses the approach formerly introduced by commit aa0fec62391c
("[SCSI] zfcp: Fix sparse warning by providing new entry in dbf") that got
later removed by commit ae0904f60fab ("[SCSI] zfcp: Redesign of the debug
tracing for recovery actions.").

Introduce zfcp_dbf_rec_trig_lock(), a wrapper for zfcp_dbf_rec_trig() that
acquires and releases the adapter->erp_lock for read.

Reported-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Fixes: 4eeaa4f3f1d6 ("zfcp: close window with unblocked rport during rport gone")
Cc: <stable@vger.kernel.org> # 2.6.32+
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/scsi/zfcp_dbf.c  |   23 ++++++++++++++++++++++-
 drivers/s390/scsi/zfcp_ext.h  |    5 ++++-
 drivers/s390/scsi/zfcp_scsi.c |   14 +++++++-------
 3 files changed, 33 insertions(+), 9 deletions(-)

--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -4,7 +4,7 @@
  *
  * Debug traces for zfcp.
  *
- * Copyright IBM Corp. 2002, 2017
+ * Copyright IBM Corp. 2002, 2018
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -308,6 +308,27 @@ void zfcp_dbf_rec_trig(char *tag, struct
 	spin_unlock_irqrestore(&dbf->rec_lock, flags);
 }
 
+/**
+ * zfcp_dbf_rec_trig_lock - trace event related to triggered recovery with lock
+ * @tag: identifier for event
+ * @adapter: adapter on which the erp_action should run
+ * @port: remote port involved in the erp_action
+ * @sdev: scsi device involved in the erp_action
+ * @want: wanted erp_action
+ * @need: required erp_action
+ *
+ * The adapter->erp_lock must not be held.
+ */
+void zfcp_dbf_rec_trig_lock(char *tag, struct zfcp_adapter *adapter,
+			    struct zfcp_port *port, struct scsi_device *sdev,
+			    u8 want, u8 need)
+{
+	unsigned long flags;
+
+	read_lock_irqsave(&adapter->erp_lock, flags);
+	zfcp_dbf_rec_trig(tag, adapter, port, sdev, want, need);
+	read_unlock_irqrestore(&adapter->erp_lock, flags);
+}
 
 /**
  * zfcp_dbf_rec_run_lvl - trace event related to running recovery
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -4,7 +4,7 @@
  *
  * External function declarations.
  *
- * Copyright IBM Corp. 2002, 2016
+ * Copyright IBM Corp. 2002, 2018
  */
 
 #ifndef ZFCP_EXT_H
@@ -35,6 +35,9 @@ extern int zfcp_dbf_adapter_register(str
 extern void zfcp_dbf_adapter_unregister(struct zfcp_adapter *);
 extern void zfcp_dbf_rec_trig(char *, struct zfcp_adapter *,
 			      struct zfcp_port *, struct scsi_device *, u8, u8);
+extern void zfcp_dbf_rec_trig_lock(char *tag, struct zfcp_adapter *adapter,
+				   struct zfcp_port *port,
+				   struct scsi_device *sdev, u8 want, u8 need);
 extern void zfcp_dbf_rec_run(char *, struct zfcp_erp_action *);
 extern void zfcp_dbf_rec_run_lvl(int level, char *tag,
 				 struct zfcp_erp_action *erp);
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -4,7 +4,7 @@
  *
  * Interface to Linux SCSI midlayer.
  *
- * Copyright IBM Corp. 2002, 2017
+ * Copyright IBM Corp. 2002, 2018
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -618,9 +618,9 @@ static void zfcp_scsi_rport_register(str
 	ids.port_id = port->d_id;
 	ids.roles = FC_RPORT_ROLE_FCP_TARGET;
 
-	zfcp_dbf_rec_trig("scpaddy", port->adapter, port, NULL,
-			  ZFCP_PSEUDO_ERP_ACTION_RPORT_ADD,
-			  ZFCP_PSEUDO_ERP_ACTION_RPORT_ADD);
+	zfcp_dbf_rec_trig_lock("scpaddy", port->adapter, port, NULL,
+			       ZFCP_PSEUDO_ERP_ACTION_RPORT_ADD,
+			       ZFCP_PSEUDO_ERP_ACTION_RPORT_ADD);
 	rport = fc_remote_port_add(port->adapter->scsi_host, 0, &ids);
 	if (!rport) {
 		dev_err(&port->adapter->ccw_device->dev,
@@ -642,9 +642,9 @@ static void zfcp_scsi_rport_block(struct
 	struct fc_rport *rport = port->rport;
 
 	if (rport) {
-		zfcp_dbf_rec_trig("scpdely", port->adapter, port, NULL,
-				  ZFCP_PSEUDO_ERP_ACTION_RPORT_DEL,
-				  ZFCP_PSEUDO_ERP_ACTION_RPORT_DEL);
+		zfcp_dbf_rec_trig_lock("scpdely", port->adapter, port, NULL,
+				       ZFCP_PSEUDO_ERP_ACTION_RPORT_DEL,
+				       ZFCP_PSEUDO_ERP_ACTION_RPORT_DEL);
 		fc_remote_port_delete(rport);
 		port->rport = NULL;
 	}

[PATCH 4.14 049/165] loop: dont call into filesystem while holding lo_ctl_mutex

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Omar Sandoval <osandov@fb.com>

commit 2d1d4c1e591fd40bd7dafd868a249d7d00e215d5 upstream.

We hit an issue where a loop device on NFS was stuck in
loop_get_status() doing vfs_getattr() after the NFS server died, which
caused a pile-up of uninterruptible processes waiting on lo_ctl_mutex.
There's no reason to hold this lock while we wait on the filesystem;
let's drop it so that other processes can do their thing. We need to
grab a reference on lo_backing_file while we use it, and we can get rid
of the check on lo_device, which has been unnecessary since commit
a34c0ae9ebd6 ("[PATCH] loop: remove the bio remapping capability") in
the linux-history tree.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/loop.c |   38 ++++++++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 14 deletions(-)

--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1166,21 +1166,17 @@ loop_set_status(struct loop_device *lo,
 static int
 loop_get_status(struct loop_device *lo, struct loop_info64 *info)
 {
-	struct file *file = lo->lo_backing_file;
+	struct file *file;
 	struct kstat stat;
-	int error;
+	int ret;
 
-	if (lo->lo_state != Lo_bound)
+	if (lo->lo_state != Lo_bound) {
+		mutex_unlock(&lo->lo_ctl_mutex);
 		return -ENXIO;
-	error = vfs_getattr(&file->f_path, &stat,
-			    STATX_INO, AT_STATX_SYNC_AS_STAT);
-	if (error)
-		return error;
+	}
+
 	memset(info, 0, sizeof(*info));
 	info->lo_number = lo->lo_number;
-	info->lo_device = huge_encode_dev(stat.dev);
-	info->lo_inode = stat.ino;
-	info->lo_rdevice = huge_encode_dev(lo->lo_device ? stat.rdev : stat.dev);
 	info->lo_offset = lo->lo_offset;
 	info->lo_sizelimit = lo->lo_sizelimit;
 	info->lo_flags = lo->lo_flags;
@@ -1193,7 +1189,19 @@ loop_get_status(struct loop_device *lo,
 		memcpy(info->lo_encrypt_key, lo->lo_encrypt_key,
 		       lo->lo_encrypt_key_size);
 	}
-	return 0;
+
+	/* Drop lo_ctl_mutex while we call into the filesystem. */
+	file = get_file(lo->lo_backing_file);
+	mutex_unlock(&lo->lo_ctl_mutex);
+	ret = vfs_getattr(&file->f_path, &stat, STATX_INO,
+			  AT_STATX_SYNC_AS_STAT);
+	if (!ret) {
+		info->lo_device = huge_encode_dev(stat.dev);
+		info->lo_inode = stat.ino;
+		info->lo_rdevice = huge_encode_dev(stat.rdev);
+	}
+	fput(file);
+	return ret;
 }
 
 static void
@@ -1373,7 +1381,8 @@ static int lo_ioctl(struct block_device
 		break;
 	case LOOP_GET_STATUS:
 		err = loop_get_status_old(lo, (struct loop_info __user *) arg);
-		break;
+		/* loop_get_status() unlocks lo_ctl_mutex */
+		goto out_unlocked;
 	case LOOP_SET_STATUS64:
 		err = -EPERM;
 		if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN))
@@ -1382,7 +1391,8 @@ static int lo_ioctl(struct block_device
 		break;
 	case LOOP_GET_STATUS64:
 		err = loop_get_status64(lo, (struct loop_info64 __user *) arg);
-		break;
+		/* loop_get_status() unlocks lo_ctl_mutex */
+		goto out_unlocked;
 	case LOOP_SET_CAPACITY:
 		err = -EPERM;
 		if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN))
@@ -1543,7 +1553,7 @@ static int lo_compat_ioctl(struct block_
 		mutex_lock(&lo->lo_ctl_mutex);
 		err = loop_get_status_compat(
 			lo, (struct compat_loop_info __user *) arg);
-		mutex_unlock(&lo->lo_ctl_mutex);
+		/* loop_get_status() unlocks lo_ctl_mutex */
 		break;
 	case LOOP_SET_CAPACITY:
 	case LOOP_CLR_FD:

[PATCH 4.14 050/165] loop: fix LOOP_GET_STATUS lock imbalance

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Omar Sandoval <osandov@fb.com>

commit bdac616db9bbadb90b7d6a406144571015e138f7 upstream.

Commit 2d1d4c1e591f made loop_get_status() drop lo_ctx_mutex before
returning, but the loop_get_status_old(), loop_get_status64(), and
loop_get_status_compat() wrappers don't call loop_get_status() if the
passed argument is NULL. The callers expect that the lock is dropped, so
make sure we drop it in that case, too.

Reported-by: syzbot+31e8daa8b3fc129e75f2@syzkaller.appspotmail.com
Fixes: 2d1d4c1e591f ("loop: don't call into filesystem while holding lo_ctl_mutex")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/loop.c |   33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1282,12 +1282,13 @@ static int
 loop_get_status_old(struct loop_device *lo, struct loop_info __user *arg) {
 	struct loop_info info;
 	struct loop_info64 info64;
-	int err = 0;
+	int err;
 
-	if (!arg)
-		err = -EINVAL;
-	if (!err)
-		err = loop_get_status(lo, &info64);
+	if (!arg) {
+		mutex_unlock(&lo->lo_ctl_mutex);
+		return -EINVAL;
+	}
+	err = loop_get_status(lo, &info64);
 	if (!err)
 		err = loop_info64_to_old(&info64, &info);
 	if (!err && copy_to_user(arg, &info, sizeof(info)))
@@ -1299,12 +1300,13 @@ loop_get_status_old(struct loop_device *
 static int
 loop_get_status64(struct loop_device *lo, struct loop_info64 __user *arg) {
 	struct loop_info64 info64;
-	int err = 0;
+	int err;
 
-	if (!arg)
-		err = -EINVAL;
-	if (!err)
-		err = loop_get_status(lo, &info64);
+	if (!arg) {
+		mutex_unlock(&lo->lo_ctl_mutex);
+		return -EINVAL;
+	}
+	err = loop_get_status(lo, &info64);
 	if (!err && copy_to_user(arg, &info64, sizeof(info64)))
 		err = -EFAULT;
 
@@ -1525,12 +1527,13 @@ loop_get_status_compat(struct loop_devic
 		       struct compat_loop_info __user *arg)
 {
 	struct loop_info64 info64;
-	int err = 0;
+	int err;
 
-	if (!arg)
-		err = -EINVAL;
-	if (!err)
-		err = loop_get_status(lo, &info64);
+	if (!arg) {
+		mutex_unlock(&lo->lo_ctl_mutex);
+		return -EINVAL;
+	}
+	err = loop_get_status(lo, &info64);
 	if (!err)
 		err = loop_info64_to_compat(&info64, arg);
 	return err;

[PATCH 4.14 051/165] cfg80211: limit wiphy names to 128 bytes

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit a7cfebcb7594a24609268f91299ab85ba064bf82 upstream.

There's currently no limit on wiphy names, other than netlink
message size and memory limitations, but that causes issues when,
for example, the wiphy name is used in a uevent, e.g. in rfkill
where we use the same name for the rfkill instance, and then the
buffer there is "only" 2k for the environment variables.

This was reported by syzkaller, which used a 4k name.

Limit the name to something reasonable, I randomly picked 128.

Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/uapi/linux/nl80211.h |    2 ++
 net/wireless/core.c          |    3 +++
 2 files changed, 5 insertions(+)

--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2604,6 +2604,8 @@ enum nl80211_attrs {
 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
 
+#define NL80211_WIPHY_NAME_MAXLEN		128
+
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_HT_RATES		77
 #define NL80211_MAX_SUPP_REG_RULES		64
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -95,6 +95,9 @@ static int cfg80211_dev_check_name(struc
 
 	ASSERT_RTNL();
 
+	if (strlen(newname) > NL80211_WIPHY_NAME_MAXLEN)
+		return -EINVAL;
+
 	/* prohibit calling the thing phy%d when %d is not its number */
 	sscanf(newname, PHY_NAME "%d%n", &wiphy_idx, &taken);
 	if (taken == strlen(newname) && wiphy_idx != rdev->wiphy_idx) {

[PATCH 4.14 052/165] hfsplus: stop workqueue when fill_super() failed

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit 66072c29328717072fd84aaff3e070e3f008ba77 upstream.

syzbot is reporting ODEBUG messages at hfsplus_fill_super() [1].  This
is because hfsplus_fill_super() forgot to call cancel_delayed_work_sync().

As far as I can see, it is hfsplus_mark_mdb_dirty() from
hfsplus_new_inode() in hfsplus_fill_super() that calls
queue_delayed_work().  Therefore, I assume that hfsplus_new_inode() does
not fail if queue_delayed_work() was called, and the out_put_hidden_dir
label is the appropriate location to call cancel_delayed_work_sync().

[1] https://syzkaller.appspot.com/bug?id=a66f45e96fdbeb76b796bf46eb25ea878c42a6c9

Link: http://lkml.kernel.org/r/964a8b27-cd69-357c-fe78-76b066056201@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+4f2e5f086147d543ab03@syzkaller.appspotmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/hfsplus/super.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -588,6 +588,7 @@ static int hfsplus_fill_super(struct sup
 	return 0;
 
 out_put_hidden_dir:
+	cancel_delayed_work_sync(&sbi->sync_work);
 	iput(sbi->hidden_dir);
 out_put_root:
 	dput(sb->s_root);

[PATCH 4.14 053/165] x86/kexec: Avoid double free_page() upon do_kexec_load() failure

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit a466ef76b815b86748d9870ef2a430af7b39c710 upstream.

>From ff82bedd3e12f0d3353282054ae48c3bd8c72012 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Wed, 9 May 2018 12:12:39 +0900
Subject: [PATCH 4.14 053/165] x86/kexec: Avoid double free_page() upon do_kexec_load() failure

syzbot is reporting crashes after memory allocation failure inside
do_kexec_load() [1]. This is because free_transition_pgtable() is called
by both init_transition_pgtable() and machine_kexec_cleanup() when memory
allocation failed inside init_transition_pgtable().

Regarding 32bit code, machine_kexec_free_page_tables() is called by both
machine_kexec_alloc_page_tables() and machine_kexec_cleanup() when memory
allocation failed inside machine_kexec_alloc_page_tables().

Fix this by leaving the error handling to machine_kexec_cleanup()
(and optionally setting NULL after free_page()).

[1] https://syzkaller.appspot.com/bug?id=91e52396168cf2bdd572fe1e1bc0bc645c1c6b40

Fixes: f5deb79679af6eb4 ("x86: kexec: Use one page table in x86_64 machine_kexec")
Fixes: 92be3d6bdf2cb349 ("kexec/i386: allocate page table pages dynamically")
Reported-by: syzbot <syzbot+d96f60296ef613fe1d69@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: prudo@linux.vnet.ibm.com
Cc: Huang Ying <ying.huang@intel.com>
Cc: syzkaller-bugs@googlegroups.com
Cc: takahiro.akashi@linaro.org
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: akpm@linux-foundation.org
Cc: dyoung@redhat.com
Cc: kirill.shutemov@linux.intel.com
Link: https://lkml.kernel.org/r/201805091942.DGG12448.tMFVFSJFQOOLHO@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/machine_kexec_32.c |    6 +++++-
 arch/x86/kernel/machine_kexec_64.c |    5 ++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -57,12 +57,17 @@ static void load_segments(void)
 static void machine_kexec_free_page_tables(struct kimage *image)
 {
 	free_page((unsigned long)image->arch.pgd);
+	image->arch.pgd = NULL;
 #ifdef CONFIG_X86_PAE
 	free_page((unsigned long)image->arch.pmd0);
+	image->arch.pmd0 = NULL;
 	free_page((unsigned long)image->arch.pmd1);
+	image->arch.pmd1 = NULL;
 #endif
 	free_page((unsigned long)image->arch.pte0);
+	image->arch.pte0 = NULL;
 	free_page((unsigned long)image->arch.pte1);
+	image->arch.pte1 = NULL;
 }
 
 static int machine_kexec_alloc_page_tables(struct kimage *image)
@@ -79,7 +84,6 @@ static int machine_kexec_alloc_page_tabl
 	    !image->arch.pmd0 || !image->arch.pmd1 ||
 #endif
 	    !image->arch.pte0 || !image->arch.pte1) {
-		machine_kexec_free_page_tables(image);
 		return -ENOMEM;
 	}
 	return 0;
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -38,9 +38,13 @@ static struct kexec_file_ops *kexec_file
 static void free_transition_pgtable(struct kimage *image)
 {
 	free_page((unsigned long)image->arch.p4d);
+	image->arch.p4d = NULL;
 	free_page((unsigned long)image->arch.pud);
+	image->arch.pud = NULL;
 	free_page((unsigned long)image->arch.pmd);
+	image->arch.pmd = NULL;
 	free_page((unsigned long)image->arch.pte);
+	image->arch.pte = NULL;
 }
 
 static int init_transition_pgtable(struct kimage *image, pgd_t *pgd)
@@ -90,7 +94,6 @@ static int init_transition_pgtable(struc
 	set_pte(pte, pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL_EXEC_NOENC));
 	return 0;
 err:
-	free_transition_pgtable(image);
 	return result;
 }
 

[PATCH 4.14 053/165] x86/kexec: Avoid double free_page() upon do_kexec_load() failure

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit a466ef76b815b86748d9870ef2a430af7b39c710 upstream.

>>From ff82bedd3e12f0d3353282054ae48c3bd8c72012 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Wed, 9 May 2018 12:12:39 +0900
Subject: [PATCH 4.14 053/165] x86/kexec: Avoid double free_page() upon do_kexec_load() failure

syzbot is reporting crashes after memory allocation failure inside
do_kexec_load() [1]. This is because free_transition_pgtable() is called
by both init_transition_pgtable() and machine_kexec_cleanup() when memory
allocation failed inside init_transition_pgtable().

Regarding 32bit code, machine_kexec_free_page_tables() is called by both
machine_kexec_alloc_page_tables() and machine_kexec_cleanup() when memory
allocation failed inside machine_kexec_alloc_page_tables().

Fix this by leaving the error handling to machine_kexec_cleanup()
(and optionally setting NULL after free_page()).

[1] https://syzkaller.appspot.com/bug?id=91e52396168cf2bdd572fe1e1bc0bc645c1c6b40

Fixes: f5deb79679af6eb4 ("x86: kexec: Use one page table in x86_64 machine_kexec")
Fixes: 92be3d6bdf2cb349 ("kexec/i386: allocate page table pages dynamically")
Reported-by: syzbot <syzbot+d96f60296ef613fe1d69@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: prudo@linux.vnet.ibm.com
Cc: Huang Ying <ying.huang@intel.com>
Cc: syzkaller-bugs@googlegroups.com
Cc: takahiro.akashi@linaro.org
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: akpm@linux-foundation.org
Cc: dyoung@redhat.com
Cc: kirill.shutemov@linux.intel.com
Link: https://lkml.kernel.org/r/201805091942.DGG12448.tMFVFSJFQOOLHO@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/machine_kexec_32.c |    6 +++++-
 arch/x86/kernel/machine_kexec_64.c |    5 ++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -57,12 +57,17 @@ static void load_segments(void)
 static void machine_kexec_free_page_tables(struct kimage *image)
 {
 	free_page((unsigned long)image->arch.pgd);
+	image->arch.pgd = NULL;
 #ifdef CONFIG_X86_PAE
 	free_page((unsigned long)image->arch.pmd0);
+	image->arch.pmd0 = NULL;
 	free_page((unsigned long)image->arch.pmd1);
+	image->arch.pmd1 = NULL;
 #endif
 	free_page((unsigned long)image->arch.pte0);
+	image->arch.pte0 = NULL;
 	free_page((unsigned long)image->arch.pte1);
+	image->arch.pte1 = NULL;
 }
 
 static int machine_kexec_alloc_page_tables(struct kimage *image)
@@ -79,7 +84,6 @@ static int machine_kexec_alloc_page_tabl
 	    !image->arch.pmd0 || !image->arch.pmd1 ||
 #endif
 	    !image->arch.pte0 || !image->arch.pte1) {
-		machine_kexec_free_page_tables(image);
 		return -ENOMEM;
 	}
 	return 0;
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -38,9 +38,13 @@ static struct kexec_file_ops *kexec_file
 static void free_transition_pgtable(struct kimage *image)
 {
 	free_page((unsigned long)image->arch.p4d);
+	image->arch.p4d = NULL;
 	free_page((unsigned long)image->arch.pud);
+	image->arch.pud = NULL;
 	free_page((unsigned long)image->arch.pmd);
+	image->arch.pmd = NULL;
 	free_page((unsigned long)image->arch.pte);
+	image->arch.pte = NULL;
 }
 
 static int init_transition_pgtable(struct kimage *image, pgd_t *pgd)
@@ -90,7 +94,6 @@ static int init_transition_pgtable(struc
 	set_pte(pte, pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL_EXEC_NOENC));
 	return 0;
 err:
-	free_transition_pgtable(image);
 	return result;
 }
 

[PATCH 4.14 054/165] usb: gadget: f_uac2: fix bFirstInterface in composite gadget

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Keeping <john@metanate.com>

[ Upstream commit 8813a59ed892305b5ac1b5b901740b1ad4b5fefa ]

If there are multiple functions associated with a configuration, then
the UAC2 interfaces may not start at zero.  Set the correct first
interface number in the association descriptor so that the audio
interfaces are enumerated correctly in this case.

Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_uac2.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -528,6 +528,8 @@ afunc_bind(struct usb_configuration *cfg
 		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 		return ret;
 	}
+	iad_desc.bFirstInterface = ret;
+
 	std_ac_if_desc.bInterfaceNumber = ret;
 	uac2->ac_intf = ret;
 	uac2->ac_alt = 0;

[PATCH 4.14 055/165] usb: dwc3: Undo PHY init if soft reset fails

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Norris <briannorris@chromium.org>

[ Upstream commit 00b42170c86f90ac9dea83a7dfcd3f0c38098fe2 ]

In this function, we init the USB2 and USB3 PHYs, but if soft reset
times out, we don't unwind this.

Noticed by inspection.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -248,6 +248,9 @@ static int dwc3_core_soft_reset(struct d
 		udelay(1);
 	} while (--retries);
 
+	phy_exit(dwc->usb3_generic_phy);
+	phy_exit(dwc->usb2_generic_phy);
+
 	return -ETIMEDOUT;
 }
 

[PATCH 4.14 056/165] usb: dwc3: omap: dont miss events during suspend/resume

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roger Quadros <rogerq@ti.com>

[ Upstream commit c49f63055e252810e5d6c83a4943b18db16b3cd8 ]

The USB cable state can change during suspend/resume
so be sure to check and update the extcon state.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/dwc3-omap.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -590,9 +590,25 @@ static int dwc3_omap_resume(struct devic
 	return 0;
 }
 
+static void dwc3_omap_complete(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	if (extcon_get_state(omap->edev, EXTCON_USB))
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
+	else
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF);
+
+	if (extcon_get_state(omap->edev, EXTCON_USB_HOST))
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+	else
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT);
+}
+
 static const struct dev_pm_ops dwc3_omap_dev_pm_ops = {
 
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_omap_suspend, dwc3_omap_resume)
+	.complete = dwc3_omap_complete,
 };
 
 #define DEV_PM_OPS	(&dwc3_omap_dev_pm_ops)

[PATCH 4.14 057/165] usb: gadget: core: Fix use-after-free of usb_request

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Manu Gautam <mgautam@codeaurora.org>

[ Upstream commit e74bd4d358e5455233f1dcc3975425905b270b91 ]

Driver is tracing usb_request after freeing it.
Fix it by changing the order.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -191,8 +191,8 @@ EXPORT_SYMBOL_GPL(usb_ep_alloc_request);
 void usb_ep_free_request(struct usb_ep *ep,
 				       struct usb_request *req)
 {
-	ep->ops->free_request(ep, req);
 	trace_usb_ep_free_request(ep, req, 0);
+	ep->ops->free_request(ep, req);
 }
 EXPORT_SYMBOL_GPL(usb_ep_free_request);
 

[PATCH 4.14 058/165] usb: gadget: fsl_udc_core: fix ep valid checks

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Agner <stefan@agner.ch>

[ Upstream commit 20c63f4089cceab803438c383631963e34c4d8e5 ]

Clang reports the following warning:
  drivers/usb/gadget/udc/fsl_udc_core.c:1312:10: warning: address of array
  'ep->name' will always evaluate to 'true' [-Wpointer-bool-conversion]
        if (ep->name)
        ~~  ~~~~^~~~

It seems that the authors intention was to check if the ep has been
configured through struct_ep_setup. Check whether struct usb_ep name
pointer has been set instead.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/fsl_udc_core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -1309,7 +1309,7 @@ static void udc_reset_ep_queue(struct fs
 {
 	struct fsl_ep *ep = get_ep_by_pipe(udc, pipe);
 
-	if (ep->name)
+	if (ep->ep.name)
 		nuke(ep, -ESHUTDOWN);
 }
 
@@ -1697,7 +1697,7 @@ static void dtd_complete_irq(struct fsl_
 		curr_ep = get_ep_by_pipe(udc, i);
 
 		/* If the ep is configured */
-		if (curr_ep->name == NULL) {
+		if (!curr_ep->ep.name) {
 			WARNING("Invalid EP?");
 			continue;
 		}

[PATCH 4.14 059/165] usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vardan Mikayelyan <mvardan@synopsys.com>

[ Upstream commit 755d739534f998d92e348fba8ffb0478416576e7 ]

We should call dwc2_hsotg_enqueue_setup() after properly
setting lx_state. Because it may cause error-out from
dwc2_hsotg_enqueue_setup() due to wrong value in lx_state.

Issue can be reproduced by loading driver while connected
A-Connector (start in A-HOST mode) then disconnect A-Connector
to switch to B-DEVICE.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/gadget.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3414,12 +3414,6 @@ void dwc2_hsotg_core_init_disconnected(s
 	dwc2_writel(dwc2_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
 	       DXEPCTL_USBACTEP, hsotg->regs + DIEPCTL0);
 
-	dwc2_hsotg_enqueue_setup(hsotg);
-
-	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-		dwc2_readl(hsotg->regs + DIEPCTL0),
-		dwc2_readl(hsotg->regs + DOEPCTL0));
-
 	/* clear global NAKs */
 	val = DCTL_CGOUTNAK | DCTL_CGNPINNAK;
 	if (!is_usb_reset)
@@ -3430,6 +3424,12 @@ void dwc2_hsotg_core_init_disconnected(s
 	mdelay(3);
 
 	hsotg->lx_state = DWC2_L0;
+
+	dwc2_hsotg_enqueue_setup(hsotg);
+
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		dwc2_readl(hsotg->regs + DIEPCTL0),
+		dwc2_readl(hsotg->regs + DOEPCTL0));
 }
 
 static void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)

[PATCH 4.14 060/165] usb: cdc_acm: prevent race at write to acm while system resumes

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dominik Bozek <dominikx.bozek@intel.com>

[ Upstream commit b86b8eb6fecb5a4bac1ed0ca925c4082a61ea6e9 ]

ACM driver may accept data to transmit while system is not fully
resumed. In this case ACM driver buffers data and prepare URBs
on usb anchor list.
There is a little chance that two tasks put a char and initiate
acm_tty_flush_chars(). In such a case, driver will put one URB
twice on usb anchor list.
This patch also reset length of data before resue of a buffer.
This not only prevent sending rubbish, but also lower risc of race.

Without this patch we hit following kernel panic in one of our
stabilty/stress tests.

[   46.884442] *list_add double add*: new=ffff9b2ab7289330, prev=ffff9b2ab7289330, next=ffff9b2ab81e28e0.
[   46.884476] Modules linked in: hci_uart btbcm bluetooth rfkill_gpio igb_avb(O) cfg80211 snd_soc_sst_bxt_tdf8532 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_soc_sst_acpi snd_soc_sst_match snd_hda_ext_core snd_hda_core trusty_timer trusty_wall trusty_log trusty_virtio trusty_ipc trusty_mem trusty_irq trusty virtio_ring virtio intel_ipu4_mmu_bxtB0 lib2600_mod_bxtB0 intel_ipu4_isys_mod_bxtB0 lib2600psys_mod_bxtB0 intel_ipu4_psys_mod_bxtB0 intel_ipu4_mod_bxtB0 intel_ipu4_wrapper_bxtB0 intel_ipu4_acpi videobuf2_dma_contig as3638 dw9714 lm3643 crlmodule smiapp smiapp_pll
[   46.884480] CPU: 1 PID: 33 Comm: kworker/u8:1 Tainted: G     U  W  O    4.9.56-quilt-2e5dc0ac-g618ed69ced6e-dirty #4
[   46.884489] Workqueue: events_unbound flush_to_ldisc
[   46.884494]  ffffb98ac012bb08 ffffffffad3e82e5 ffffb98ac012bb58 0000000000000000
[   46.884497]  ffffb98ac012bb48 ffffffffad0a23d1 00000024ad6374dd ffff9b2ab7289330
[   46.884500]  ffff9b2ab81e28e0 ffff9b2ab7289330 0000000000000002 0000000000000000
[   46.884501] Call Trace:
[   46.884507]  [<ffffffffad3e82e5>] dump_stack+0x67/0x92
[   46.884511]  [<ffffffffad0a23d1>] __warn+0xd1/0xf0
[   46.884513]  [<ffffffffad0a244f>] warn_slowpath_fmt+0x5f/0x80
[   46.884516]  [<ffffffffad407443>] __list_add+0xb3/0xc0
[   46.884521]  [<ffffffffad71133c>] *usb_anchor_urb*+0x4c/0xa0
[   46.884524]  [<ffffffffad782c6f>] *acm_tty_flush_chars*+0x8f/0xb0
[   46.884527]  [<ffffffffad782cd1>] *acm_tty_put_char*+0x41/0x100
[   46.884530]  [<ffffffffad4ced34>] tty_put_char+0x24/0x40
[   46.884533]  [<ffffffffad4d3bf5>] do_output_char+0xa5/0x200
[   46.884535]  [<ffffffffad4d3e98>] __process_echoes+0x148/0x290
[   46.884538]  [<ffffffffad4d654c>] n_tty_receive_buf_common+0x57c/0xb00
[   46.884541]  [<ffffffffad4d6ae4>] n_tty_receive_buf2+0x14/0x20
[   46.884543]  [<ffffffffad4d9662>] tty_ldisc_receive_buf+0x22/0x50
[   46.884545]  [<ffffffffad4d9c05>] flush_to_ldisc+0xc5/0xe0
[   46.884549]  [<ffffffffad0bcfe8>] process_one_work+0x148/0x440
[   46.884551]  [<ffffffffad0bdc19>] worker_thread+0x69/0x4a0
[   46.884554]  [<ffffffffad0bdbb0>] ? max_active_store+0x80/0x80
[   46.884556]  [<ffffffffad0c2e10>] kthread+0x110/0x130
[   46.884559]  [<ffffffffad0c2d00>] ? kthread_park+0x60/0x60
[   46.884563]  [<ffffffffadad9917>] ret_from_fork+0x27/0x40
[   46.884566] ---[ end trace 3bd599058b8a9eb3 ]---

Signed-off-by: Dominik Bozek <dominikx.bozek@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -187,6 +187,7 @@ static int acm_wb_alloc(struct acm *acm)
 		wb = &acm->wb[wbn];
 		if (!wb->use) {
 			wb->use = 1;
+			wb->len = 0;
 			return wbn;
 		}
 		wbn = (wbn + 1) % ACM_NW;
@@ -818,16 +819,18 @@ static int acm_tty_write(struct tty_stru
 static void acm_tty_flush_chars(struct tty_struct *tty)
 {
 	struct acm *acm = tty->driver_data;
-	struct acm_wb *cur = acm->putbuffer;
+	struct acm_wb *cur;
 	int err;
 	unsigned long flags;
 
+	spin_lock_irqsave(&acm->write_lock, flags);
+
+	cur = acm->putbuffer;
 	if (!cur) /* nothing to do */
-		return;
+		goto out;
 
 	acm->putbuffer = NULL;
 	err = usb_autopm_get_interface_async(acm->control);
-	spin_lock_irqsave(&acm->write_lock, flags);
 	if (err < 0) {
 		cur->use = 0;
 		acm->putbuffer = cur;

[PATCH 4.14 061/165] net: usbnet: fix potential deadlock on 32bit hosts

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 2695578b896aea472b2c0dcbe9d92daa71738484 ]

Marek reported a LOCKDEP issue occurring on 32bit host,
that we tracked down to the fact that usbnet could either
run from soft or hard irqs.

This patch adds u64_stats_update_begin_irqsave() and
u64_stats_update_end_irqrestore() helpers to solve this case.

[   17.768040] ================================
[   17.772239] WARNING: inconsistent lock state
[   17.776511] 4.16.0-rc3-next-20180227-00007-g876c53a7493c #453 Not tainted
[   17.783329] --------------------------------
[   17.787580] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[   17.793607] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[   17.798751]  (&syncp->seq#5){?.-.}, at: [<9b22e5f0>]
asix_rx_fixup_internal+0x188/0x288
[   17.806790] {IN-HARDIRQ-W} state was registered at:
[   17.811677]   tx_complete+0x100/0x208
[   17.815319]   __usb_hcd_giveback_urb+0x60/0xf0
[   17.819770]   xhci_giveback_urb_in_irq+0xa8/0x240
[   17.824469]   xhci_td_cleanup+0xf4/0x16c
[   17.828367]   xhci_irq+0xe74/0x2240
[   17.831827]   usb_hcd_irq+0x24/0x38
[   17.835343]   __handle_irq_event_percpu+0x98/0x510
[   17.840111]   handle_irq_event_percpu+0x1c/0x58
[   17.844623]   handle_irq_event+0x38/0x5c
[   17.848519]   handle_fasteoi_irq+0xa4/0x138
[   17.852681]   generic_handle_irq+0x18/0x28
[   17.856760]   __handle_domain_irq+0x6c/0xe4
[   17.860941]   gic_handle_irq+0x54/0xa0
[   17.864666]   __irq_svc+0x70/0xb0
[   17.867964]   arch_cpu_idle+0x20/0x3c
[   17.871578]   arch_cpu_idle+0x20/0x3c
[   17.875190]   do_idle+0x144/0x218
[   17.878468]   cpu_startup_entry+0x18/0x1c
[   17.882454]   start_kernel+0x394/0x400
[   17.886177] irq event stamp: 161912
[   17.889616] hardirqs last  enabled at (161912): [<7bedfacf>]
__netdev_alloc_skb+0xcc/0x140
[   17.897893] hardirqs last disabled at (161911): [<d58261d0>]
__netdev_alloc_skb+0x94/0x140
[   17.904903] exynos5-hsi2c 12ca0000.i2c: tx timeout
[   17.906116] softirqs last  enabled at (161904): [<387102ff>]
irq_enter+0x78/0x80
[   17.906123] softirqs last disabled at (161905): [<cf4c628e>]
irq_exit+0x134/0x158
[   17.925722].
[   17.925722] other info that might help us debug this:
[   17.933435]  Possible unsafe locking scenario:
[   17.933435].
[   17.940331]        CPU0
[   17.942488]        ----
[   17.944894]   lock(&syncp->seq#5);
[   17.948274]   <Interrupt>
[   17.950847]     lock(&syncp->seq#5);
[   17.954386].
[   17.954386]  *** DEADLOCK ***
[   17.954386].
[   17.962422] no locks held by swapper/0/0.

Fixes: c8b5d129ee29 ("net: usbnet: support 64bit stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/usbnet.c       |   10 ++++++----
 include/linux/u64_stats_sync.h |   22 ++++++++++++++++++++++
 2 files changed, 28 insertions(+), 4 deletions(-)

--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -315,6 +315,7 @@ static void __usbnet_status_stop_force(s
 void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
 {
 	struct pcpu_sw_netstats *stats64 = this_cpu_ptr(dev->stats64);
+	unsigned long flags;
 	int	status;
 
 	if (test_bit(EVENT_RX_PAUSED, &dev->flags)) {
@@ -326,10 +327,10 @@ void usbnet_skb_return (struct usbnet *d
 	if (skb->protocol == 0)
 		skb->protocol = eth_type_trans (skb, dev->net);
 
-	u64_stats_update_begin(&stats64->syncp);
+	flags = u64_stats_update_begin_irqsave(&stats64->syncp);
 	stats64->rx_packets++;
 	stats64->rx_bytes += skb->len;
-	u64_stats_update_end(&stats64->syncp);
+	u64_stats_update_end_irqrestore(&stats64->syncp, flags);
 
 	netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n",
 		  skb->len + sizeof (struct ethhdr), skb->protocol);
@@ -1250,11 +1251,12 @@ static void tx_complete (struct urb *urb
 
 	if (urb->status == 0) {
 		struct pcpu_sw_netstats *stats64 = this_cpu_ptr(dev->stats64);
+		unsigned long flags;
 
-		u64_stats_update_begin(&stats64->syncp);
+		flags = u64_stats_update_begin_irqsave(&stats64->syncp);
 		stats64->tx_packets += entry->packets;
 		stats64->tx_bytes += entry->length;
-		u64_stats_update_end(&stats64->syncp);
+		u64_stats_update_end_irqrestore(&stats64->syncp, flags);
 	} else {
 		dev->net->stats.tx_errors++;
 
--- a/include/linux/u64_stats_sync.h
+++ b/include/linux/u64_stats_sync.h
@@ -90,6 +90,28 @@ static inline void u64_stats_update_end(
 #endif
 }
 
+static inline unsigned long
+u64_stats_update_begin_irqsave(struct u64_stats_sync *syncp)
+{
+	unsigned long flags = 0;
+
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	local_irq_save(flags);
+	write_seqcount_begin(&syncp->seq);
+#endif
+	return flags;
+}
+
+static inline void
+u64_stats_update_end_irqrestore(struct u64_stats_sync *syncp,
+				unsigned long flags)
+{
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	write_seqcount_end(&syncp->seq);
+	local_irq_restore(flags);
+#endif
+}
+
 static inline void u64_stats_update_begin_raw(struct u64_stats_sync *syncp)
 {
 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)

[PATCH 4.14 062/165] ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leonard Crestez <leonard.crestez@nxp.com>

[ Upstream commit 970656b3246d30955894951ed16bd658e42d8c24 ]

The two usb-otg regulators for imx7d-sdb are both called
"regulator-usb-otg1-vbus" and they effectively override each other.

This is most likely a copy-paste error.

Fixes: b877039aa1fe ("ARM: dts: imx7d-sdb: Adjust the regulator nodes")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/imx7d-sdb.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -82,7 +82,7 @@
 		enable-active-high;
 	};
 
-	reg_usb_otg2_vbus: regulator-usb-otg1-vbus {
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg2_vbus";
 		regulator-min-microvolt = <5000000>;

[PATCH 4.14 063/165] usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit d56e57ca030c8b4296944a2ae61ac167bf979c07 ]

This patch reverts the commit 835e4241e714 ("usb: host: xhci-plat:
enable clk in resume timing") because this driver also has runtime PM
and the commit 560869100b99 ("clk: renesas: cpg-mssr: Restore module
clocks during resume") will restore the clock on R-Car H3 environment.

If the xhci_plat_suspend() disables the clk, the system cannot enable
the clk in resume like the following behavior:

< In resume >
 - genpd_resume_noirq() runs and enable the clk (enable_count = 1)
 - cpg_mssr_resume_noirq() restores the clk register.
  -- Since the clk was disabled in suspend, cpg_mssr_resume_noirq()
     will disable the clk and keep the enable_count.
 - Even if xhci_plat_resume() calls clk_prepare_enable(), since
   the enable_count is 1, the clk will be not enabled.

After this patch is applied, the cpg-mssr driver will save the clk
as enable, so the clk will be enabled in resume.

Fixes: 835e4241e714 ("usb: host: xhci-plat: enable clk in resume timing")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-plat.c |   11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -355,7 +355,6 @@ static int __maybe_unused xhci_plat_susp
 {
 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	int ret;
 
 	/*
 	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
@@ -365,12 +364,7 @@ static int __maybe_unused xhci_plat_susp
 	 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
 	 * also applies to runtime suspend.
 	 */
-	ret = xhci_suspend(xhci, device_may_wakeup(dev));
-
-	if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk))
-		clk_disable_unprepare(xhci->clk);
-
-	return ret;
+	return xhci_suspend(xhci, device_may_wakeup(dev));
 }
 
 static int __maybe_unused xhci_plat_resume(struct device *dev)
@@ -379,9 +373,6 @@ static int __maybe_unused xhci_plat_resu
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	int ret;
 
-	if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk))
-		clk_prepare_enable(xhci->clk);
-
 	ret = xhci_priv_resume_quirk(hcd);
 	if (ret)
 		return ret;

[PATCH 4.14 064/165] USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fredrik Noring <noring@nocrew.org>

[ Upstream commit d6c931ea32dc08ac2665bb5f009f9c40ad1bbdb3 ]

Scatter-gather needs to be disabled when using dma_declare_coherent_memory
and HCD_LOCAL_MEM. Andrea Righi made the equivalent fix for EHCI drivers
in commit 4307a28eb01284 "USB: EHCI: fix NULL pointer dererence in HCDs
that use HCD_LOCAL_MEM".

The following NULL pointer WARN_ON_ONCE triggered with OHCI drivers:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 49 at drivers/usb/core/hcd.c:1379 hcd_alloc_coherent+0x4c/0xc8
Modules linked in:
CPU: 0 PID: 49 Comm: usb-storage Not tainted 4.15.0+ #1014
Stack : 00000000 00000000 805a78d2 0000003a 81f5c2cc 8053d367 804d77fc 00000031
        805a3a08 00000563 81ee9400 805a0000 00000000 10058c00 81f61b10 805c0000
        00000000 00000000 805a0000 00d9038e 00000004 803ee818 00000006 312e3420
        805c0000 00000000 00000073 81f61958 00000000 00000000 802eb380 804fd538
        00000009 00000563 81ee9400 805a0000 00000002 80056148 00000000 805a0000
        ...
Call Trace:
[<578af360>] show_stack+0x74/0x104
[<2f3702c6>] __warn+0x118/0x120
[<ae93fc9e>] warn_slowpath_null+0x44/0x58
[<a891a517>] hcd_alloc_coherent+0x4c/0xc8
[<3578fa36>] usb_hcd_map_urb_for_dma+0x4d8/0x534
[<110bc94c>] usb_hcd_submit_urb+0x82c/0x834
[<02eb5baf>] usb_sg_wait+0x14c/0x1a0
[<ccd09e85>] usb_stor_bulk_transfer_sglist.part.1+0xac/0x124
[<87a5c34c>] usb_stor_bulk_srb+0x40/0x60
[<ff1792ac>] usb_stor_Bulk_transport+0x160/0x37c
[<b9e2709c>] usb_stor_invoke_transport+0x3c/0x500
[<004754f4>] usb_stor_control_thread+0x258/0x28c
[<22edf42e>] kthread+0x134/0x13c
[<a419ffd0>] ret_from_kernel_thread+0x14/0x1c
---[ end trace bcdb825805eefdcc ]---

Signed-off-by: Fredrik Noring <noring@nocrew.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/ohci-hcd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -446,7 +446,8 @@ static int ohci_init (struct ohci_hcd *o
 	struct usb_hcd *hcd = ohci_to_hcd(ohci);
 
 	/* Accept arbitrarily long scatter-gather lists */
-	hcd->self.sg_tablesize = ~0;
+	if (!(hcd->driver->flags & HCD_LOCAL_MEM))
+		hcd->self.sg_tablesize = ~0;
 
 	if (distrust_firmware)
 		ohci->flags |= OHCI_QUIRK_HUB_POWER;

[PATCH 4.14 065/165] net/usb/qmi_wwan.c: Add USB id for lt4120 modem

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Torsten Hilbrich <torsten.hilbrich@secunet.com>

[ Upstream commit f3d801baf118c9d452ee7c278df16880c892e669 ]

This is needed to support the modem found in HP EliteBook 820 G3.

Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1241,6 +1241,7 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x413c, 0x81b6, 8)},	/* Dell Wireless 5811e */
 	{QMI_FIXED_INTF(0x413c, 0x81b6, 10)},	/* Dell Wireless 5811e */
 	{QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)},	/* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
+	{QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)},	/* HP lt4120 Snapdragon X5 LTE */
 	{QMI_FIXED_INTF(0x22de, 0x9061, 3)},	/* WeTelecom WPD-600N */
 	{QMI_FIXED_INTF(0x1e0e, 0x9001, 5)},	/* SIMCom 7230E */
 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0125, 4)},	/* Quectel EC25, EC20 R2.0  Mini PCIe */

[PATCH 4.14 066/165] net-usb: add qmi_wwan if on lte modem wistron neweb d18q1

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Giuseppe Lippolis <giu.lippolis@gmail.com>

[ Upstream commit d4c4bc11353f3bea6754f7d21e3612c9f32d1d64 ]

This modem is embedded on dlink dwr-921 router.
    The oem configuration states:

    T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=1435 ProdID=0918 Rev= 2.32
    S:  Manufacturer=Android
    S:  Product=Android
    S:  SerialNumber=0123456789ABCDEF
    C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
    I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
    E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
    E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
    E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Tested on openwrt distribution

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/qmi_wwan.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1105,6 +1105,9 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x0846, 0x68a2, 8)},
 	{QMI_FIXED_INTF(0x12d1, 0x140c, 1)},	/* Huawei E173 */
 	{QMI_FIXED_INTF(0x12d1, 0x14ac, 1)},	/* Huawei E1820 */
+	{QMI_FIXED_INTF(0x1435, 0xd181, 3)},	/* Wistron NeWeb D18Q1 */
+	{QMI_FIXED_INTF(0x1435, 0xd181, 4)},	/* Wistron NeWeb D18Q1 */
+	{QMI_FIXED_INTF(0x1435, 0xd181, 5)},	/* Wistron NeWeb D18Q1 */
 	{QMI_FIXED_INTF(0x16d8, 0x6003, 0)},	/* CMOTech 6003 */
 	{QMI_FIXED_INTF(0x16d8, 0x6007, 0)},	/* CMOTech CHE-628S */
 	{QMI_FIXED_INTF(0x16d8, 0x6008, 0)},	/* CMOTech CMU-301 */

[PATCH 4.14 067/165] Bluetooth: btusb: Add USB ID 7392:a611 for Edimax EW-7611ULB

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vicente Bergas <vicencb@gmail.com>

[ Upstream commit a41e0796396eeceff673af4a38feaee149c6ff86 ]

This WiFi/Bluetooth USB dongle uses a Realtek chipset, so, use btrtl for it.

Product information:
https://wikidevi.com/wiki/Edimax_EW-7611ULB

>From /sys/kernel/debug/usb/devices
T:  Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=7392 ProdID=a611 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Edimax Wi-Fi N150 Bluetooth4.0 USB Adapter
S:  SerialNumber=00e04c000001
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723bu
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=500us
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btusb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -370,6 +370,9 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
 	{ USB_DEVICE(0x13d3, 0x3494), .driver_info = BTUSB_REALTEK },
 
+	/* Additional Realtek 8723BU Bluetooth devices */
+	{ USB_DEVICE(0x7392, 0xa611), .driver_info = BTUSB_REALTEK },
+
 	/* Additional Realtek 8821AE Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
 	{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },

[PATCH 4.14 067/165] Bluetooth: btusb: Add USB ID 7392:a611 for Edimax EW-7611ULB

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vicente Bergas <vicencb@gmail.com>

[ Upstream commit a41e0796396eeceff673af4a38feaee149c6ff86 ]

This WiFi/Bluetooth USB dongle uses a Realtek chipset, so, use btrtl for it.

Product information:
https://wikidevi.com/wiki/Edimax_EW-7611ULB

>>From /sys/kernel/debug/usb/devices
T:  Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=7392 ProdID=a611 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Edimax Wi-Fi N150 Bluetooth4.0 USB Adapter
S:  SerialNumber=00e04c000001
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723bu
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=500us
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btusb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -370,6 +370,9 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
 	{ USB_DEVICE(0x13d3, 0x3494), .driver_info = BTUSB_REALTEK },
 
+	/* Additional Realtek 8723BU Bluetooth devices */
+	{ USB_DEVICE(0x7392, 0xa611), .driver_info = BTUSB_REALTEK },
+
 	/* Additional Realtek 8821AE Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
 	{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },

[PATCH 4.14 068/165] ALSA: usb-audio: Add native DSD support for Luxman DA-06

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nobutaka Okabe <nob77413@gmail.com>

[ Upstream commit 71426535f49fe6034d0e0db77608b91a0c1a022d ]

Add native DSD support quirk for Luxman DA-06 DAC, by adding the
PID/VID 1852:5065.

Rename "is_marantz_denon_dac()" function to "is_itf_usb_dsd_2alts_dac()"
to cover broader device family sharing the same USB audio
implementation(*).
For the same reason, rename "is_teac_dsd_dac()" function to
"is_itf_usb_dsd_3alts_dac()".

(*)
These devices have the same USB controller "ITF-USB DSD", supplied by
INTERFACE Co., Ltd.
"ITF-USB DSD" USB controller has two patterns,

Pattern 1. (2 altsets version)
- Altset 0: for control
- Altset 1: for stream (S32)
- Altset 2: for stream (S32, DSD_U32)

Pattern 2. (3 altsets version)
- Altset 0: for control
- Altset 1: for stream (S16)
- Altset 2: for stream (S32)
- Altset 3: for stream (S32, DSD_U32)

"is_itf_usb_dsd_2alts_dac()" returns true, if the DAC has "Pattern 1"
USB controller, and "is_itf_usb_dsd_3alts_dac()" returns true, if
"Pattern2".

Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks.c |   29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)

--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1155,24 +1155,27 @@ bool snd_usb_get_sample_rate_quirk(struc
 	return false;
 }
 
-/* Marantz/Denon USB DACs need a vendor cmd to switch
+/* ITF-USB DSD based DACs need a vendor cmd to switch
  * between PCM and native DSD mode
+ * (2 altsets version)
  */
-static bool is_marantz_denon_dac(unsigned int id)
+static bool is_itf_usb_dsd_2alts_dac(unsigned int id)
 {
 	switch (id) {
 	case USB_ID(0x154e, 0x1003): /* Denon DA-300USB */
 	case USB_ID(0x154e, 0x3005): /* Marantz HD-DAC1 */
 	case USB_ID(0x154e, 0x3006): /* Marantz SA-14S1 */
+	case USB_ID(0x1852, 0x5065): /* Luxman DA-06 */
 		return true;
 	}
 	return false;
 }
 
-/* TEAC UD-501/UD-503/NT-503 USB DACs need a vendor cmd to switch
- * between PCM/DOP and native DSD mode
+/* ITF-USB DSD based DACs need a vendor cmd to switch
+ * between PCM and native DSD mode
+ * (3 altsets version)
  */
-static bool is_teac_dsd_dac(unsigned int id)
+static bool is_itf_usb_dsd_3alts_dac(unsigned int id)
 {
 	switch (id) {
 	case USB_ID(0x0644, 0x8043): /* TEAC UD-501/UD-503/NT-503 */
@@ -1189,7 +1192,7 @@ int snd_usb_select_mode_quirk(struct snd
 	struct usb_device *dev = subs->dev;
 	int err;
 
-	if (is_marantz_denon_dac(subs->stream->chip->usb_id)) {
+	if (is_itf_usb_dsd_2alts_dac(subs->stream->chip->usb_id)) {
 		/* First switch to alt set 0, otherwise the mode switch cmd
 		 * will not be accepted by the DAC
 		 */
@@ -1210,7 +1213,7 @@ int snd_usb_select_mode_quirk(struct snd
 			break;
 		}
 		mdelay(20);
-	} else if (is_teac_dsd_dac(subs->stream->chip->usb_id)) {
+	} else if (is_itf_usb_dsd_3alts_dac(subs->stream->chip->usb_id)) {
 		/* Vendor mode switch cmd is required. */
 		switch (fmt->altsetting) {
 		case 3: /* DSD mode (DSD_U32) requested */
@@ -1306,10 +1309,10 @@ void snd_usb_ctl_msg_quirk(struct usb_de
 	    (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
 		mdelay(20);
 
-	/* Marantz/Denon devices with USB DAC functionality need a delay
+	/* ITF-USB DSD based DACs functionality need a delay
 	 * after each class compliant request
 	 */
-	if (is_marantz_denon_dac(chip->usb_id)
+	if (is_itf_usb_dsd_2alts_dac(chip->usb_id)
 	    && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
 		mdelay(20);
 
@@ -1396,14 +1399,14 @@ u64 snd_usb_interface_dsd_format_quirks(
 		break;
 	}
 
-	/* Denon/Marantz devices with USB DAC functionality */
-	if (is_marantz_denon_dac(chip->usb_id)) {
+	/* ITF-USB DSD based DACs (2 altsets version) */
+	if (is_itf_usb_dsd_2alts_dac(chip->usb_id)) {
 		if (fp->altsetting == 2)
 			return SNDRV_PCM_FMTBIT_DSD_U32_BE;
 	}
 
-	/* TEAC devices with USB DAC functionality */
-	if (is_teac_dsd_dac(chip->usb_id)) {
+	/* ITF-USB DSD based DACs (3 altsets version) */
+	if (is_itf_usb_dsd_3alts_dac(chip->usb_id)) {
 		if (fp->altsetting == 3)
 			return SNDRV_PCM_FMTBIT_DSD_U32_BE;
 	}

[PATCH 4.14 069/165] usb: dwc3: Add SoftReset PHY synchonization delay

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit fab3833338779e1e668bd58d1f76d601657304b8 ]

>From DWC_usb31 programming guide section 1.3.2, once DWC3_DCTL_CSFTRST
bit is cleared, we must wait at least 50ms before accessing the PHY
domain (synchronization delay).

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -243,7 +243,7 @@ static int dwc3_core_soft_reset(struct d
 	do {
 		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 		if (!(reg & DWC3_DCTL_CSFTRST))
-			return 0;
+			goto done;
 
 		udelay(1);
 	} while (--retries);
@@ -252,6 +252,17 @@ static int dwc3_core_soft_reset(struct d
 	phy_exit(dwc->usb2_generic_phy);
 
 	return -ETIMEDOUT;
+
+done:
+	/*
+	 * For DWC_usb31 controller, once DWC3_DCTL_CSFTRST bit is cleared,
+	 * we must wait at least 50ms before accessing the PHY domain
+	 * (synchronization delay). DWC_usb31 programming guide section 1.3.2.
+	 */
+	if (dwc3_is_usb31(dwc))
+		msleep(50);
+
+	return 0;
 }
 
 /*

[PATCH 4.14 069/165] usb: dwc3: Add SoftReset PHY synchonization delay

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit fab3833338779e1e668bd58d1f76d601657304b8 ]

>>From DWC_usb31 programming guide section 1.3.2, once DWC3_DCTL_CSFTRST
bit is cleared, we must wait at least 50ms before accessing the PHY
domain (synchronization delay).

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -243,7 +243,7 @@ static int dwc3_core_soft_reset(struct d
 	do {
 		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 		if (!(reg & DWC3_DCTL_CSFTRST))
-			return 0;
+			goto done;
 
 		udelay(1);
 	} while (--retries);
@@ -252,6 +252,17 @@ static int dwc3_core_soft_reset(struct d
 	phy_exit(dwc->usb2_generic_phy);
 
 	return -ETIMEDOUT;
+
+done:
+	/*
+	 * For DWC_usb31 controller, once DWC3_DCTL_CSFTRST bit is cleared,
+	 * we must wait at least 50ms before accessing the PHY domain
+	 * (synchronization delay). DWC_usb31 programming guide section 1.3.2.
+	 */
+	if (dwc3_is_usb31(dwc))
+		msleep(50);
+
+	return 0;
 }
 
 /*

[PATCH 4.14 070/165] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit 0cab8d26d6e5e053b2bed3356992aaa71dc93628 ]

Update two GTXFIFOSIZ bit fields for the DWC_usb31 controller. TXFDEP
is a 15-bit value instead of 16-bit value, and bit 15 is TXFRAMNUM.

The GTXFIFOSIZ register for DWC_usb31 is as follows:
 +-------+-----------+----------------------------------+
 | BITS  | Name      | Description                      |
 +=======+===========+==================================+
 | 31:16 | TXFSTADDR | Transmit FIFOn RAM Start Address |
 | 15    | TXFRAMNUM | Asynchronous/Periodic TXFIFO     |
 | 14:0  | TXFDEP    | TXFIFO Depth                     |
 +-------+-----------+----------------------------------+

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -249,6 +249,8 @@
 #define DWC3_GUSB3PIPECTL_TX_DEEPH(n)	((n) << 1)
 
 /* Global TX Fifo Size Register */
+#define DWC31_GTXFIFOSIZ_TXFRAMNUM	BIT(15)		/* DWC_usb31 only */
+#define DWC31_GTXFIFOSIZ_TXFDEF(n)	((n) & 0x7fff)	/* DWC_usb31 only */
 #define DWC3_GTXFIFOSIZ_TXFDEF(n)	((n) & 0xffff)
 #define DWC3_GTXFIFOSIZ_TXFSTADDR(n)	((n) & 0xffff0000)
 

[PATCH 4.14 071/165] usb: dwc3: Makefile: fix link error on randconfig

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <felipe.balbi@linux.intel.com>

[ Upstream commit de948a74ad6f0eefddf36d765b8f2dd6df82caa0 ]

If building a kernel without FTRACE but with TRACING, dwc3.ko fails to
link due to missing trace events. Fix this by using the correct
Kconfig symbol on Makefile.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_USB_DWC3)			+= dwc3.o
 
 dwc3-y					:= core.o
 
-ifneq ($(CONFIG_FTRACE),)
+ifneq ($(CONFIG_TRACING),)
 	dwc3-y				+= trace.o
 endif
 

[PATCH 4.14 072/165] xhci: zero usb device slot_id member when disabling and freeing a xhci slot

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit a400efe455f7b61ac9a801ac8d0d01f8c8d82dd5 ]

set udev->slot_id to zero when disabling and freeing the xhci slot.
Prevents usb core from calling xhci with a stale slot id.

xHC controller may be reset during resume to recover from some error.
All slots are unusable as they are disabled and freed.
xhci driver starts slot enumeration again from 1 in the order they are
enabled. In the worst case a stale udev->slot_id for one device matches
a newly enabled slot_id for a different device, causing us to
perform a action on the wrong device.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-mem.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -926,6 +926,8 @@ void xhci_free_virt_device(struct xhci_h
 	if (dev->out_ctx)
 		xhci_free_container_ctx(xhci, dev->out_ctx);
 
+	if (dev->udev && dev->udev->slot_id)
+		dev->udev->slot_id = 0;
 	kfree(xhci->devs[slot_id]);
 	xhci->devs[slot_id] = NULL;
 }

[PATCH 4.14 073/165] usb: dwc2: Fix interval type issue

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Grigor Tovmasyan <Grigor.Tovmasyan@synopsys.com>

[ Upstream commit 12814a3f8f9b247531d7863170cc82b3fe4218fd ]

The maximum value that unsigned char can hold is 255, meanwhile
the maximum value of interval is  2^(bIntervalMax-1)=2^15.

Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/core.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -216,7 +216,7 @@ struct dwc2_hsotg_ep {
 	unsigned char           dir_in;
 	unsigned char           index;
 	unsigned char           mc;
-	unsigned char           interval;
+	u16                     interval;
 
 	unsigned int            halted:1;
 	unsigned int            periodic:1;

[PATCH 4.14 074/165] usb: dwc2: hcd: Fix host channel halt flow

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Minas Harutyunyan <hminas@synopsys.com>

[ Upstream commit a82c7abdf8fc3b09c4a0ed2eee6d43ecef2ccdb0 ]

According databook in Buffer and External DMA mode
non-split periodic channels can't be halted.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/hcd.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -979,6 +979,24 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso
 
 	if (dbg_hc(chan))
 		dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+	/*
+	 * In buffer DMA or external DMA mode channel can't be halted
+	 * for non-split periodic channels. At the end of the next
+	 * uframe/frame (in the worst case), the core generates a channel
+	 * halted and disables the channel automatically.
+	 */
+	if ((hsotg->params.g_dma && !hsotg->params.g_dma_desc) ||
+	    hsotg->hw_params.arch == GHWCFG2_EXT_DMA_ARCH) {
+		if (!chan->do_split &&
+		    (chan->ep_type == USB_ENDPOINT_XFER_ISOC ||
+		     chan->ep_type == USB_ENDPOINT_XFER_INT)) {
+			dev_err(hsotg->dev, "%s() Channel can't be halted\n",
+				__func__);
+			return;
+		}
+	}
+
 	if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS)
 		dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status);
 

[PATCH 4.14 075/165] usb: dwc2: host: Fix transaction errors in host mode

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Minas Harutyunyan <hminas@synopsys.com>

[ Upstream commit 92a8dd26464e1f21f1d869ec53717bd2c1200d63 ]

Added missing GUSBCFG programming in host mode, which fixes
transaction errors issue on HiKey and Altera Cyclone V boards.

These field even if was programmed in device mode (in function
dwc2_hsotg_core_init_disconnected()) will be resetting to POR values
after core soft reset applied.
So, each time when switching to host mode required to set this field
to correct value.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/hcd.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -2329,10 +2329,22 @@ static int dwc2_core_init(struct dwc2_hs
  */
 static void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
 {
-	u32 hcfg, hfir, otgctl;
+	u32 hcfg, hfir, otgctl, usbcfg;
 
 	dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
 
+	/* Set HS/FS Timeout Calibration to 7 (max available value).
+	 * The number of PHY clocks that the application programs in
+	 * this field is added to the high/full speed interpacket timeout
+	 * duration in the core to account for any additional delays
+	 * introduced by the PHY. This can be required, because the delay
+	 * introduced by the PHY in generating the linestate condition
+	 * can vary from one PHY to another.
+	 */
+	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+	usbcfg |= GUSBCFG_TOUTCAL(7);
+	dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+
 	/* Restart the Phy Clock */
 	dwc2_writel(0, hsotg->regs + PCGCTL);
 

[PATCH 4.14 076/165] usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars-Peter Clausen <lars@metafoo.de>

[ Upstream commit 946ef68ad4e45aa048a5fb41ce8823ed29da866a ]

Some UDC drivers (like the DWC3) expect that the response to a setup()
request is queued from within the setup function itself so that it is
available as soon as setup() has completed.

Upon receiving a setup request the function fs driver creates an event that
is made available to userspace. And only once userspace has acknowledged
that event the response to the setup request is queued.

So it violates the requirement of those UDC drivers and random failures can
be observed. This is basically a race condition and if userspace is able to
read the event and queue the response fast enough all is good. But if it is
not, for example because other processes are currently scheduled to run,
the USB host that sent the setup request will observe an error.

To avoid this the gadget framework provides the USB_GADGET_DELAYED_STATUS
return code. If a setup() callback returns this value the UDC driver is
aware that response is not yet available and can uses the appropriate
methods to handle this case.

Since in the case of function fs the response will never be available when
the setup() function returns make sure that this status code is used.

This fixed random occasional failures that were previously observed on a
DWC3 based system under high system load.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_fs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -3239,7 +3239,7 @@ static int ffs_func_setup(struct usb_fun
 	__ffs_event_add(ffs, FUNCTIONFS_SETUP);
 	spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags);
 
-	return 0;
+	return USB_GADGET_DELAYED_STATUS;
 }
 
 static bool ffs_func_req_match(struct usb_function *f,

[PATCH 4.14 077/165] usb: gadget: ffs: Execute copy_to_user() with USER_DS set

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars-Peter Clausen <lars@metafoo.de>

[ Upstream commit 4058ebf33cb0be88ca516f968eda24ab7b6b93e4 ]

When using a AIO read() operation on the function FS gadget driver a URB is
submitted asynchronously and on URB completion the received data is copied
to the userspace buffer associated with the read operation.

This is done from a kernel worker thread invoking copy_to_user() (through
copy_to_iter()). And while the user space process memory is made available
to the kernel thread using use_mm(), some architecture require in addition
to this that the operation runs with USER_DS set. Otherwise the userspace
memory access will fail.

For example on ARM64 with Privileged Access Never (PAN) and User Access
Override (UAO) enabled the following crash occurs.

	Internal error: Accessing user space memory with fs=KERNEL_DS: 9600004f [#1] SMP
	Modules linked in:
	CPU: 2 PID: 1636 Comm: kworker/2:1 Not tainted 4.9.0-04081-g8ab2dfb-dirty #487
	Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
	Workqueue: events ffs_user_copy_worker
	task: ffffffc87afc8080 task.stack: ffffffc87a00c000
	PC is at __arch_copy_to_user+0x190/0x220
	LR is at copy_to_iter+0x78/0x3c8
	[...]
	[<ffffff800847b790>] __arch_copy_to_user+0x190/0x220
	[<ffffff80086f25d8>] ffs_user_copy_worker+0x70/0x130
	[<ffffff80080b8c64>] process_one_work+0x1dc/0x460
	[<ffffff80080b8f38>] worker_thread+0x50/0x4b0
	[<ffffff80080bf5a0>] kthread+0xd8/0xf0
	[<ffffff8008083680>] ret_from_fork+0x10/0x50

Address this by placing a set_fs(USER_DS) before of the copy operation
and revert it again once the copy operation has finished.

This patch is analogous to commit d7ffde35e31a ("vhost: use USER_DS in
vhost_worker thread") which addresses the same underlying issue.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_fs.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -759,9 +759,13 @@ static void ffs_user_copy_worker(struct
 	bool kiocb_has_eventfd = io_data->kiocb->ki_flags & IOCB_EVENTFD;
 
 	if (io_data->read && ret > 0) {
+		mm_segment_t oldfs = get_fs();
+
+		set_fs(USER_DS);
 		use_mm(io_data->mm);
 		ret = ffs_copy_to_iter(io_data->buf, ret, &io_data->data);
 		unuse_mm(io_data->mm);
+		set_fs(oldfs);
 	}
 
 	io_data->kiocb->ki_complete(io_data->kiocb, ret, ret);

[PATCH 4.14 078/165] usbip: Correct maximum value of CONFIG_USBIP_VHCI_HC_PORTS

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

[ Upstream commit 351a8d4837ae0d61744e64262c3a80ab92ff3e42 ]

Now that usbip supports USB3, the maximum number of ports allowed
on a hub is 15 (USB_SS_MAXPORTS), not 31 (USB_MAXCHILDREN).

Reported-by: Gianluigi Tiesi <sherpya@netfarm.it>
Reported-by: Borissh1983 <borissh1983@gmail.com>
References: https://bugs.debian.org/878866
Fixes: 1c9de5bf4286 ("usbip: vhci-hcd: Add USB3 SuperSpeed support")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/usbip/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/usbip/Kconfig
+++ b/drivers/usb/usbip/Kconfig
@@ -27,7 +27,7 @@ config USBIP_VHCI_HCD
 
 config USBIP_VHCI_HC_PORTS
 	int "Number of ports per USB/IP virtual host controller"
-	range 1 31
+	range 1 15
 	default 8
 	depends on USBIP_VHCI_HCD
 	---help---

[PATCH 4.14 079/165] usb: gadget: udc: change comparison to bitshift when dealing with a mask

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit ac87e560f7c0f91b62012e9a159c0681a373b922 ]

Due to a typo, the mask was destroyed by a comparison instead of a bit
shift.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/goku_udc.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/udc/goku_udc.h
+++ b/drivers/usb/gadget/udc/goku_udc.h
@@ -28,7 +28,7 @@ struct goku_udc_regs {
 #	define INT_EP1DATASET		0x00040
 #	define INT_EP2DATASET		0x00080
 #	define INT_EP3DATASET		0x00100
-#define INT_EPnNAK(n)		(0x00100 < (n))		/* 0 < n < 4 */
+#define INT_EPnNAK(n)		(0x00100 << (n))	/* 0 < n < 4 */
 #	define INT_EP1NAK		0x00200
 #	define INT_EP2NAK		0x00400
 #	define INT_EP3NAK		0x00800

[PATCH 4.14 080/165] usb: gadget: composite: fix incorrect handling of OS desc requests

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Dickens <christopher.a.dickens@gmail.com>

[ Upstream commit 5d6ae4f0da8a64a185074dabb1b2f8c148efa741 ]

When handling an OS descriptor request, one of the first operations is
to zero out the request buffer using the wLength from the setup packet.
There is no bounds checking, so a wLength > 4096 would clobber memory
adjacent to the request buffer. Fix this by taking the min of wLength
and the request buffer length prior to the memset. While at it, define
the buffer length in a header file so that magic numbers don't appear
throughout the code.

When returning data to the host, the data length should be the min of
the wLength and the valid data we have to return. Currently we are
returning wLength, thus requests for a wLength greater than the amount
of data in the OS descriptor buffer would return invalid (albeit zero'd)
data following the valid descriptor data. Fix this by counting the
number of bytes when constructing the data and using this when
determining the length of the request.

Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/composite.c |   40 +++++++++++++++++++---------------------
 include/linux/usb/composite.h  |    3 +++
 2 files changed, 22 insertions(+), 21 deletions(-)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1425,7 +1425,7 @@ static int count_ext_compat(struct usb_c
 	return res;
 }
 
-static void fill_ext_compat(struct usb_configuration *c, u8 *buf)
+static int fill_ext_compat(struct usb_configuration *c, u8 *buf)
 {
 	int i, count;
 
@@ -1452,10 +1452,12 @@ static void fill_ext_compat(struct usb_c
 				buf += 23;
 			}
 			count += 24;
-			if (count >= 4096)
-				return;
+			if (count + 24 >= USB_COMP_EP0_OS_DESC_BUFSIZ)
+				return count;
 		}
 	}
+
+	return count;
 }
 
 static int count_ext_prop(struct usb_configuration *c, int interface)
@@ -1500,25 +1502,20 @@ static int fill_ext_prop(struct usb_conf
 	struct usb_os_desc *d;
 	struct usb_os_desc_ext_prop *ext_prop;
 	int j, count, n, ret;
-	u8 *start = buf;
 
 	f = c->interface[interface];
+	count = 10; /* header length */
 	for (j = 0; j < f->os_desc_n; ++j) {
 		if (interface != f->os_desc_table[j].if_id)
 			continue;
 		d = f->os_desc_table[j].os_desc;
 		if (d)
 			list_for_each_entry(ext_prop, &d->ext_prop, entry) {
-				/* 4kB minus header length */
-				n = buf - start;
-				if (n >= 4086)
-					return 0;
-
-				count = ext_prop->data_len +
+				n = ext_prop->data_len +
 					ext_prop->name_len + 14;
-				if (count > 4086 - n)
-					return -EINVAL;
-				usb_ext_prop_put_size(buf, count);
+				if (count + n >= USB_COMP_EP0_OS_DESC_BUFSIZ)
+					return count;
+				usb_ext_prop_put_size(buf, n);
 				usb_ext_prop_put_type(buf, ext_prop->type);
 				ret = usb_ext_prop_put_name(buf, ext_prop->name,
 							    ext_prop->name_len);
@@ -1544,11 +1541,12 @@ static int fill_ext_prop(struct usb_conf
 				default:
 					return -EINVAL;
 				}
-				buf += count;
+				buf += n;
+				count += n;
 			}
 	}
 
-	return 0;
+	return count;
 }
 
 /*
@@ -1830,6 +1828,7 @@ unknown:
 			req->complete = composite_setup_complete;
 			buf = req->buf;
 			os_desc_cfg = cdev->os_desc_config;
+			w_length = min_t(u16, w_length, USB_COMP_EP0_OS_DESC_BUFSIZ);
 			memset(buf, 0, w_length);
 			buf[5] = 0x01;
 			switch (ctrl->bRequestType & USB_RECIP_MASK) {
@@ -1853,8 +1852,8 @@ unknown:
 					count += 16; /* header */
 					put_unaligned_le32(count, buf);
 					buf += 16;
-					fill_ext_compat(os_desc_cfg, buf);
-					value = w_length;
+					value = fill_ext_compat(os_desc_cfg, buf);
+					value = min_t(u16, w_length, value);
 				}
 				break;
 			case USB_RECIP_INTERFACE:
@@ -1883,8 +1882,7 @@ unknown:
 							      interface, buf);
 					if (value < 0)
 						return value;
-
-					value = w_length;
+					value = min_t(u16, w_length, value);
 				}
 				break;
 			}
@@ -2159,8 +2157,8 @@ int composite_os_desc_req_prepare(struct
 		goto end;
 	}
 
-	/* OS feature descriptor length <= 4kB */
-	cdev->os_desc_req->buf = kmalloc(4096, GFP_KERNEL);
+	cdev->os_desc_req->buf = kmalloc(USB_COMP_EP0_OS_DESC_BUFSIZ,
+					 GFP_KERNEL);
 	if (!cdev->os_desc_req->buf) {
 		ret = -ENOMEM;
 		usb_ep_free_request(ep0, cdev->os_desc_req);
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -53,6 +53,9 @@
 /* big enough to hold our biggest descriptor */
 #define USB_COMP_EP0_BUFSIZ	1024
 
+/* OS feature descriptor length <= 4kB */
+#define USB_COMP_EP0_OS_DESC_BUFSIZ	4096
+
 #define USB_MS_TO_HS_INTERVAL(x)	(ilog2((x * 1000 / 125)) + 1)
 struct usb_configuration;
 

[PATCH 4.14 081/165] media: lgdt3306a: Fix module count mismatch on usb unplug

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit 835d66173a38538c072a7c393d02360dcfac8582 ]

When used as an i2c device there is a module usage count mismatch on
removal, preventing the driver from being used thereafter. dvb_attach
increments the usage count so it is properly balanced on removal.

On disconnect of Hauppauge SoloHD/DualHD before:

lsmod | grep lgdt3306a
lgdt3306a              28672  -1
i2c_mux                16384  1 lgdt3306a

On disconnect of Hauppauge SoloHD/DualHD after:

lsmod | grep lgdt3306a
lgdt3306a              28672  0
i2c_mux                16384  1 lgdt3306a

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/dvb-frontends/lgdt3306a.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/dvb-frontends/lgdt3306a.c
+++ b/drivers/media/dvb-frontends/lgdt3306a.c
@@ -2168,7 +2168,7 @@ static int lgdt3306a_probe(struct i2c_cl
 			sizeof(struct lgdt3306a_config));
 
 	config->i2c_addr = client->addr;
-	fe = lgdt3306a_attach(config, client->adapter);
+	fe = dvb_attach(lgdt3306a_attach, config, client->adapter);
 	if (fe == NULL) {
 		ret = -ENODEV;
 		goto err_fe;

[PATCH 4.14 082/165] media: em28xx: USB bulk packet size fix

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit c7c7e8d7803406daa21e96d00c357de8b77b6764 ]

Hauppauge em28xx bulk devices exhibit continuity errors and corrupted
packets, when run in VMWare virtual machines. Unknown if other
manufacturers bulk models exhibit the same issue. KVM/Qemu is unaffected.

According to documentation the maximum packet multiplier for em28xx in bulk
transfer mode is 256 * 188 bytes. This changes the size of bulk transfers
to maximum supported value and have a bonus beneficial alignment.

Before:

After:

This sets up USB to expect just as many bytes as the em28xx is set to emit.

Successful usage under load afterwards natively and in both VMWare
and KVM/Qemu virtual machines.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/em28xx/em28xx.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -191,7 +191,7 @@
    USB 2.0 spec says bulk packet size is always 512 bytes
  */
 #define EM28XX_BULK_PACKET_MULTIPLIER 384
-#define EM28XX_DVB_BULK_PACKET_MULTIPLIER 384
+#define EM28XX_DVB_BULK_PACKET_MULTIPLIER 94
 
 #define EM28XX_INTERLACED_DEFAULT 1
 

[PATCH 4.14 083/165] Bluetooth: btusb: Add device ID for RTL8822BE

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

[ Upstream commit fed03fe7e55b7dc16077f672bd9d7bbe92b3a691 ]

The Asus Z370-I contains a Realtek RTL8822BE device with an associated
BT chip using a USB ID of 0b05:185c. This device is added to the driver.

Signed-off-by: Hon Weng Chong <honwchong@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btusb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -380,6 +380,9 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
 	{ USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
 
+	/* Additional Realtek 8822BE Bluetooth devices */
+	{ USB_DEVICE(0x0b05, 0x185c), .driver_info = BTUSB_REALTEK },
+
 	/* Silicon Wave based devices */
 	{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
 

[PATCH 4.14 084/165] xhci: Show what USB release number the xHC supports from protocol capablity

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit 0ee78c101425aae681c631ba59c6ac7f44b1d83a ]

xhci driver displays the supported xHC USB revision in a message during
driver load:

"Host supports USB 3.1 Enhanced SuperSpeed"

Get the USB minor revision number from the xhci protocol capability.
This will show the correct supported revisions for new USB 3.2 and later
hosts

Don't rely on the SBRN (serial bus revision number) register, it's often
showing 0x30 (USB3.0) for hosts that support USB 3.1

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4764,6 +4764,7 @@ int xhci_gen_setup(struct usb_hcd *hcd,
 	 * quirks
 	 */
 	struct device		*dev = hcd->self.sysdev;
+	unsigned int		minor_rev;
 	int			retval;
 
 	/* Accept arbitrarily long scatter-gather lists */
@@ -4791,12 +4792,19 @@ int xhci_gen_setup(struct usb_hcd *hcd,
 		 */
 		hcd->has_tt = 1;
 	} else {
-		/* Some 3.1 hosts return sbrn 0x30, can't rely on sbrn alone */
-		if (xhci->sbrn == 0x31 || xhci->usb3_rhub.min_rev >= 1) {
-			xhci_info(xhci, "Host supports USB 3.1 Enhanced SuperSpeed\n");
+		/*
+		 * Some 3.1 hosts return sbrn 0x30, use xhci supported protocol
+		 * minor revision instead of sbrn
+		 */
+		minor_rev = xhci->usb3_rhub.min_rev;
+		if (minor_rev) {
 			hcd->speed = HCD_USB31;
 			hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
 		}
+		xhci_info(xhci, "Host supports USB 3.%x %s SuperSpeed\n",
+			  minor_rev,
+			  minor_rev ? "Enhanced" : "");
+
 		/* xHCI private pointer was set in xhci_pci_probe for the second
 		 * registered roothub.
 		 */

[PATCH 4.14 085/165] staging: bcm2835-audio: Release resources on module_exit()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill Marinushkin <k.marinushkin@gmail.com>

[ Upstream commit 626118b472d2eb45f83a0276a18d3e6a01c69f6a ]

In the current implementation, `rmmod snd_bcm2835` does not release
resources properly. It causes an oops when trying to list sound devices.

This commit fixes it.

The details WRT allocation / free are described below.

Device structure WRT allocation:

pdev
  \childdev[]
    \card
      \chip
        \pcm
        \ctl

Allocation / register sequence:

* childdev: devm_kzalloc      - freed during driver detach
* childdev: device_initialize - freed during device_unregister
* pdev: devres_alloc          - freed during driver detach
* childdev: device_add        - removed during device_unregister
* pdev, childdev: devres_add  - freed during driver detach
* card: snd_card_new          - freed during snd_card_free
* chip: kzalloc               - freed during kfree
* card, chip: snd_device_new  - freed during snd_device_free
* chip: new_pcm               - TODO: free pcm
* chip: new_ctl               - TODO: free ctl
* card: snd_card_register     - unregistered during snd_card_free

Free / unregister sequence:

* card: snd_card_free
* card, chip: snd_device_free
* childdev: device_unregister
* chip: kfree

Steps to reproduce the issue before this commit:

~~~~
$ rmmod snd_bcm2835
$ aplay -L
[  138.648130] Unable to handle kernel paging request at virtual address 7f1343c0
[  138.660415] pgd = ad8f0000
[  138.665567] [7f1343c0] *pgd=3864c811, *pte=00000000, *ppte=00000000
[  138.674887] Internal error: Oops: 7 [#1] SMP ARM
[  138.683571] Modules linked in: sha256_generic cfg80211 rfkill snd_pcm snd_timer
 snd fixed uio_pdrv_genirq uio ip_tables x_tables ipv6 [last unloaded: snd_bcm2835
]
[  138.706594] CPU: 3 PID: 463 Comm: aplay Tainted: G        WC       4.15.0-rc1-v
7+ #6
[  138.719833] Hardware name: BCM2835
[  138.726016] task: b877ac00 task.stack: aebec000
[  138.733408] PC is at try_module_get+0x38/0x24c
[  138.740813] LR is at snd_ctl_open+0x58/0x194 [snd]
[  138.748485] pc : [<801c4d5c>]    lr : [<7f0e6b2c>]    psr: 20000013
[  138.757709] sp : aebedd60  ip : aebedd88  fp : aebedd84
[  138.765884] r10: 00000000  r9 : 00000004  r8 : 7f0ed440
[  138.774040] r7 : b7e469b0  r6 : 7f0e6b2c  r5 : afd91900  r4 : 7f1343c0
[  138.783571] r3 : aebec000  r2 : 00000001  r1 : b877ac00  r0 : 7f1343c0
[  138.793084] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  138.803300] Control: 10c5387d  Table: 2d8f006a  DAC: 00000055
[  138.812064] Process aplay (pid: 463, stack limit = 0xaebec210)
[  138.820868] Stack: (0xaebedd60 to 0xaebee000)
[  138.828207] dd60: 00000000 b848d000 afd91900 00000000 b7e469b0 7f0ed440 aebedda4 aebedd88
[  138.842371] dd80: 7f0e6b2c 801c4d30 afd91900 7f0ea4dc 00000000 b7e469b0 aebeddcc aebedda8
[  138.856611] dda0: 7f0e250c 7f0e6ae0 7f0e2464 b8478ec0 b7e469b0 afd91900 7f0ea388 00000000
[  138.870864] ddc0: aebeddf4 aebeddd0 802ce590 7f0e2470 8090ab64 afd91900 afd91900 b7e469b0
[  138.885301] dde0: afd91908 802ce4e4 aebede1c aebeddf8 802c57b4 802ce4f0 afd91900 aebedea8
[  138.900110] de00: b7fa4c00 00000000 00000000 00000004 aebede3c aebede20 802c6ba8 802c56b4
[  138.915260] de20: aebedea8 00000000 aebedf5c 00000000 aebedea4 aebede40 802d9a68 802c6b58
[  138.930661] de40: b874ddd0 00000000 00000000 00000001 00000041 00000000 afd91900 aebede70
[  138.946402] de60: 00000000 00000000 00000002 b7e469b0 b8a87610 b8d6ab80 801852f8 00080000
[  138.962314] de80: aebedf5c aebedea8 00000001 80108464 aebec000 00000000 aebedf4c aebedea8
[  138.978414] dea0: 802dacd4 802d970c b8a87610 b8d6ab80 a7982bc6 00000009 af363019 b9231480
[  138.994617] dec0: 00000000 b8c038a0 b7e469b0 00000101 00000002 00000238 00000000 00000000
[  139.010823] dee0: 00000000 aebedee8 00080000 0000000f aebedf3c aebedf00 802ed7e4 80843f94
[  139.027025] df00: 00000003 00080000 b9231490 b9231480 00000000 00080000 af363000 00000000
[  139.043229] df20: 00000005 00000002 ffffff9c 00000000 00080000 ffffff9c af363000 00000003
[  139.059430] df40: aebedf94 aebedf50 802c6f70 802dac70 aebec000 00000000 00000001 00000000
[  139.075629] df60: 00020000 00000004 00000100 00000001 7ebe577c 0002e038 00000000 00000005
[  139.091828] df80: 80108464 aebec000 aebedfa4 aebedf98 802c7060 802c6e6c 00000000 aebedfa8
[  139.108025] dfa0: 801082c0 802c7040 7ebe577c 0002e038 7ebe577c 00080000 00000b98 e81c8400
[  139.124222] dfc0: 7ebe577c 0002e038 00000000 00000005 7ebe57e4 00a20af8 7ebe57f0 76f87394
[  139.140419] dfe0: 00000000 7ebe55c4 76ec88e8 76df1d9c 60000010 7ebe577c 00000000 00000000
[  139.156715] [<801c4d5c>] (try_module_get) from [<7f0e6b2c>] (snd_ctl_open+0x58/0x194 [snd])
[  139.173222] [<7f0e6b2c>] (snd_ctl_open [snd]) from [<7f0e250c>] (snd_open+0xa8/0x14c [snd])
[  139.189683] [<7f0e250c>] (snd_open [snd]) from [<802ce590>] (chrdev_open+0xac/0x188)
[  139.205465] [<802ce590>] (chrdev_open) from [<802c57b4>] (do_dentry_open+0x10c/0x314)
[  139.221347] [<802c57b4>] (do_dentry_open) from [<802c6ba8>] (vfs_open+0x5c/0x88)
[  139.236788] [<802c6ba8>] (vfs_open) from [<802d9a68>] (path_openat+0x368/0x944)
[  139.248270] [<802d9a68>] (path_openat) from [<802dacd4>] (do_filp_open+0x70/0xc4)
[  139.263731] [<802dacd4>] (do_filp_open) from [<802c6f70>] (do_sys_open+0x110/0x1d4)
[  139.279378] [<802c6f70>] (do_sys_open) from [<802c7060>] (SyS_open+0x2c/0x30)
[  139.290647] [<802c7060>] (SyS_open) from [<801082c0>] (ret_fast_syscall+0x0/0x28)
[  139.306021] Code: e3c3303f e5932004 e2822001 e5832004 (e5943000)
[  139.316265] ---[ end trace 7f3f7f6193b663ed ]---
[  139.324956] note: aplay[463] exited with preempt_count 1
~~~~

Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Michael Zoran <mzoran@crowfest.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835.c |   54 ++++++++----------
 1 file changed, 25 insertions(+), 29 deletions(-)

--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
@@ -36,6 +36,10 @@ MODULE_PARM_DESC(enable_compat_alsa,
 static void snd_devm_unregister_child(struct device *dev, void *res)
 {
 	struct device *childdev = *(struct device **)res;
+	struct bcm2835_chip *chip = dev_get_drvdata(childdev);
+	struct snd_card *card = chip->card;
+
+	snd_card_free(card);
 
 	device_unregister(childdev);
 }
@@ -61,6 +65,13 @@ static int snd_devm_add_child(struct dev
 	return 0;
 }
 
+static void snd_bcm2835_release(struct device *dev)
+{
+	struct bcm2835_chip *chip = dev_get_drvdata(dev);
+
+	kfree(chip);
+}
+
 static struct device *
 snd_create_device(struct device *parent,
 		  struct device_driver *driver,
@@ -76,6 +87,7 @@ snd_create_device(struct device *parent,
 	device_initialize(device);
 	device->parent = parent;
 	device->driver = driver;
+	device->release = snd_bcm2835_release;
 
 	dev_set_name(device, "%s", name);
 
@@ -86,18 +98,19 @@ snd_create_device(struct device *parent,
 	return device;
 }
 
-static int snd_bcm2835_free(struct bcm2835_chip *chip)
-{
-	kfree(chip);
-	return 0;
-}
-
 /* component-destructor
  * (see "Management of Cards and Components")
  */
 static int snd_bcm2835_dev_free(struct snd_device *device)
 {
-	return snd_bcm2835_free(device->device_data);
+	struct bcm2835_chip *chip = device->device_data;
+	struct snd_card *card = chip->card;
+
+	/* TODO: free pcm, ctl */
+
+	snd_device_free(card, chip);
+
+	return 0;
 }
 
 /* chip-specific constructor
@@ -122,7 +135,7 @@ static int snd_bcm2835_create(struct snd
 
 	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
 	if (err) {
-		snd_bcm2835_free(chip);
+		kfree(chip);
 		return err;
 	}
 
@@ -130,31 +143,14 @@ static int snd_bcm2835_create(struct snd
 	return 0;
 }
 
-static void snd_devm_card_free(struct device *dev, void *res)
+static struct snd_card *snd_bcm2835_card_new(struct device *dev)
 {
-	struct snd_card *snd_card = *(struct snd_card **)res;
-
-	snd_card_free(snd_card);
-}
-
-static struct snd_card *snd_devm_card_new(struct device *dev)
-{
-	struct snd_card **dr;
 	struct snd_card *card;
 	int ret;
 
-	dr = devres_alloc(snd_devm_card_free, sizeof(*dr), GFP_KERNEL);
-	if (!dr)
-		return ERR_PTR(-ENOMEM);
-
 	ret = snd_card_new(dev, -1, NULL, THIS_MODULE, 0, &card);
-	if (ret) {
-		devres_free(dr);
+	if (ret)
 		return ERR_PTR(ret);
-	}
-
-	*dr = card;
-	devres_add(dev, dr);
 
 	return card;
 }
@@ -271,7 +267,7 @@ static int snd_add_child_device(struct d
 		return PTR_ERR(child);
 	}
 
-	card = snd_devm_card_new(child);
+	card = snd_bcm2835_card_new(child);
 	if (IS_ERR(card)) {
 		dev_err(child, "Failed to create card");
 		return PTR_ERR(card);
@@ -313,7 +309,7 @@ static int snd_add_child_device(struct d
 		return err;
 	}
 
-	dev_set_drvdata(child, card);
+	dev_set_drvdata(child, chip);
 	dev_info(child, "card created with %d channels\n", numchans);
 
 	return 0;

[PATCH 4.14 085/165] staging: bcm2835-audio: Release resources on module_exit()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill Marinushkin <k.marinushkin@gmail.com>

[ Upstream commit 626118b472d2eb45f83a0276a18d3e6a01c69f6a ]

In the current implementation, `rmmod snd_bcm2835` does not release
resources properly. It causes an oops when trying to list sound devices.

This commit fixes it.

The details WRT allocation / free are described below.

Device structure WRT allocation:

pdev
  \childdev[]
    \card
      \chip
        \pcm
        \ctl

Allocation / register sequence:

* childdev: devm_kzalloc      - freed during driver detach
* childdev: device_initialize - freed during device_unregister
* pdev: devres_alloc          - freed during driver detach
* childdev: device_add        - removed during device_unregister
* pdev, childdev: devres_add  - freed during driver detach
* card: snd_card_new          - freed during snd_card_free
* chip: kzalloc               - freed during kfree
* card, chip: snd_device_new  - freed during snd_device_free
* chip: new_pcm               - TODO: free pcm
* chip: new_ctl               - TODO: free ctl
* card: snd_card_register     - unregistered during snd_card_free

Free / unregister sequence:

* card: snd_card_free
* card, chip: snd_device_free
* childdev: device_unregister
* chip: kfree

Steps to reproduce the issue before this commit:

~~~~
$ rmmod snd_bcm2835
$ aplay -L
[  138.648130] Unable to handle kernel paging request at virtual address 7f1343c0
[  138.660415] pgd = ad8f0000
[  138.665567] [7f1343c0] *pgd=3864c811, *pte=00000000, *ppte=00000000
[  138.674887] Internal error: Oops: 7 [#1] SMP ARM
[  138.683571] Modules linked in: sha256_generic cfg80211 rfkill snd_pcm snd_timer
 snd fixed uio_pdrv_genirq uio ip_tables x_tables ipv6 [last unloaded: snd_bcm2835
]
[  138.706594] CPU: 3 PID: 463 Comm: aplay Tainted: G        WC       4.15.0-rc1-v
7+ #6
[  138.719833] Hardware name: BCM2835
[  138.726016] task: b877ac00 task.stack: aebec000
[  138.733408] PC is at try_module_get+0x38/0x24c
[  138.740813] LR is at snd_ctl_open+0x58/0x194 [snd]
[  138.748485] pc : [<801c4d5c>]    lr : [<7f0e6b2c>]    psr: 20000013
[  138.757709] sp : aebedd60  ip : aebedd88  fp : aebedd84
[  138.765884] r10: 00000000  r9 : 00000004  r8 : 7f0ed440
[  138.774040] r7 : b7e469b0  r6 : 7f0e6b2c  r5 : afd91900  r4 : 7f1343c0
[  138.783571] r3 : aebec000  r2 : 00000001  r1 : b877ac00  r0 : 7f1343c0
[  138.793084] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  138.803300] Control: 10c5387d  Table: 2d8f006a  DAC: 00000055
[  138.812064] Process aplay (pid: 463, stack limit = 0xaebec210)
[  138.820868] Stack: (0xaebedd60 to 0xaebee000)
[  138.828207] dd60: 00000000 b848d000 afd91900 00000000 b7e469b0 7f0ed440 aebedda4 aebedd88
[  138.842371] dd80: 7f0e6b2c 801c4d30 afd91900 7f0ea4dc 00000000 b7e469b0 aebeddcc aebedda8
[  138.856611] dda0: 7f0e250c 7f0e6ae0 7f0e2464 b8478ec0 b7e469b0 afd91900 7f0ea388 00000000
[  138.870864] ddc0: aebeddf4 aebeddd0 802ce590 7f0e2470 8090ab64 afd91900 afd91900 b7e469b0
[  138.885301] dde0: afd91908 802ce4e4 aebede1c aebeddf8 802c57b4 802ce4f0 afd91900 aebedea8
[  138.900110] de00: b7fa4c00 00000000 00000000 00000004 aebede3c aebede20 802c6ba8 802c56b4
[  138.915260] de20: aebedea8 00000000 aebedf5c 00000000 aebedea4 aebede40 802d9a68 802c6b58
[  138.930661] de40: b874ddd0 00000000 00000000 00000001 00000041 00000000 afd91900 aebede70
[  138.946402] de60: 00000000 00000000 00000002 b7e469b0 b8a87610 b8d6ab80 801852f8 00080000
[  138.962314] de80: aebedf5c aebedea8 00000001 80108464 aebec000 00000000 aebedf4c aebedea8
[  138.978414] dea0: 802dacd4 802d970c b8a87610 b8d6ab80 a7982bc6 00000009 af363019 b9231480
[  138.994617] dec0: 00000000 b8c038a0 b7e469b0 00000101 00000002 00000238 00000000 00000000
[  139.010823] dee0: 00000000 aebedee8 00080000 0000000f aebedf3c aebedf00 802ed7e4 80843f94
[  139.027025] df00: 00000003 00080000 b9231490 b9231480 00000000 00080000 af363000 00000000
[  139.043229] df20: 00000005 00000002 ffffff9c 00000000 00080000 ffffff9c af363000 00000003
[  139.059430] df40: aebedf94 aebedf50 802c6f70 802dac70 aebec000 00000000 00000001 00000000
[  139.075629] df60: 00020000 00000004 00000100 00000001 7ebe577c 0002e038 00000000 00000005
[  139.091828] df80: 80108464 aebec000 aebedfa4 aebedf98 802c7060 802c6e6c 00000000 aebedfa8
[  139.108025] dfa0: 801082c0 802c7040 7ebe577c 0002e038 7ebe577c 00080000 00000b98 e81c8400
[  139.124222] dfc0: 7ebe577c 0002e038 00000000 00000005 7ebe57e4 00a20af8 7ebe57f0 76f87394
[  139.140419] dfe0: 00000000 7ebe55c4 76ec88e8 76df1d9c 60000010 7ebe577c 00000000 00000000
[  139.156715] [<801c4d5c>] (try_module_get) from [<7f0e6b2c>] (snd_ctl_open+0x58/0x194 [snd])
[  139.173222] [<7f0e6b2c>] (snd_ctl_open [snd]) from [<7f0e250c>] (snd_open+0xa8/0x14c [snd])
[  139.189683] [<7f0e250c>] (snd_open [snd]) from [<802ce590>] (chrdev_open+0xac/0x188)
[  139.205465] [<802ce590>] (chrdev_open) from [<802c57b4>] (do_dentry_open+0x10c/0x314)
[  139.221347] [<802c57b4>] (do_dentry_open) from [<802c6ba8>] (vfs_open+0x5c/0x88)
[  139.236788] [<802c6ba8>] (vfs_open) from [<802d9a68>] (path_openat+0x368/0x944)
[  139.248270] [<802d9a68>] (path_openat) from [<802dacd4>] (do_filp_open+0x70/0xc4)
[  139.263731] [<802dacd4>] (do_filp_open) from [<802c6f70>] (do_sys_open+0x110/0x1d4)
[  139.279378] [<802c6f70>] (do_sys_open) from [<802c7060>] (SyS_open+0x2c/0x30)
[  139.290647] [<802c7060>] (SyS_open) from [<801082c0>] (ret_fast_syscall+0x0/0x28)
[  139.306021] Code: e3c3303f e5932004 e2822001 e5832004 (e5943000)
[  139.316265] ---[ end trace 7f3f7f6193b663ed ]---
[  139.324956] note: aplay[463] exited with preempt_count 1
~~~~

Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list at broadcom.com
Cc: Michael Zoran <mzoran@crowfest.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: linux-rpi-kernel at lists.infradead.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: devel at driverdev.osuosl.org
Cc: linux-kernel at vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/vc04_services/bcm2835-audio/bcm2835.c |   54 ++++++++----------
 1 file changed, 25 insertions(+), 29 deletions(-)

--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
@@ -36,6 +36,10 @@ MODULE_PARM_DESC(enable_compat_alsa,
 static void snd_devm_unregister_child(struct device *dev, void *res)
 {
 	struct device *childdev = *(struct device **)res;
+	struct bcm2835_chip *chip = dev_get_drvdata(childdev);
+	struct snd_card *card = chip->card;
+
+	snd_card_free(card);
 
 	device_unregister(childdev);
 }
@@ -61,6 +65,13 @@ static int snd_devm_add_child(struct dev
 	return 0;
 }
 
+static void snd_bcm2835_release(struct device *dev)
+{
+	struct bcm2835_chip *chip = dev_get_drvdata(dev);
+
+	kfree(chip);
+}
+
 static struct device *
 snd_create_device(struct device *parent,
 		  struct device_driver *driver,
@@ -76,6 +87,7 @@ snd_create_device(struct device *parent,
 	device_initialize(device);
 	device->parent = parent;
 	device->driver = driver;
+	device->release = snd_bcm2835_release;
 
 	dev_set_name(device, "%s", name);
 
@@ -86,18 +98,19 @@ snd_create_device(struct device *parent,
 	return device;
 }
 
-static int snd_bcm2835_free(struct bcm2835_chip *chip)
-{
-	kfree(chip);
-	return 0;
-}
-
 /* component-destructor
  * (see "Management of Cards and Components")
  */
 static int snd_bcm2835_dev_free(struct snd_device *device)
 {
-	return snd_bcm2835_free(device->device_data);
+	struct bcm2835_chip *chip = device->device_data;
+	struct snd_card *card = chip->card;
+
+	/* TODO: free pcm, ctl */
+
+	snd_device_free(card, chip);
+
+	return 0;
 }
 
 /* chip-specific constructor
@@ -122,7 +135,7 @@ static int snd_bcm2835_create(struct snd
 
 	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
 	if (err) {
-		snd_bcm2835_free(chip);
+		kfree(chip);
 		return err;
 	}
 
@@ -130,31 +143,14 @@ static int snd_bcm2835_create(struct snd
 	return 0;
 }
 
-static void snd_devm_card_free(struct device *dev, void *res)
+static struct snd_card *snd_bcm2835_card_new(struct device *dev)
 {
-	struct snd_card *snd_card = *(struct snd_card **)res;
-
-	snd_card_free(snd_card);
-}
-
-static struct snd_card *snd_devm_card_new(struct device *dev)
-{
-	struct snd_card **dr;
 	struct snd_card *card;
 	int ret;
 
-	dr = devres_alloc(snd_devm_card_free, sizeof(*dr), GFP_KERNEL);
-	if (!dr)
-		return ERR_PTR(-ENOMEM);
-
 	ret = snd_card_new(dev, -1, NULL, THIS_MODULE, 0, &card);
-	if (ret) {
-		devres_free(dr);
+	if (ret)
 		return ERR_PTR(ret);
-	}
-
-	*dr = card;
-	devres_add(dev, dr);
 
 	return card;
 }
@@ -271,7 +267,7 @@ static int snd_add_child_device(struct d
 		return PTR_ERR(child);
 	}
 
-	card = snd_devm_card_new(child);
+	card = snd_bcm2835_card_new(child);
 	if (IS_ERR(card)) {
 		dev_err(child, "Failed to create card");
 		return PTR_ERR(card);
@@ -313,7 +309,7 @@ static int snd_add_child_device(struct d
 		return err;
 	}
 
-	dev_set_drvdata(child, card);
+	dev_set_drvdata(child, chip);
 	dev_info(child, "card created with %d channels\n", numchans);
 
 	return 0;

[PATCH 4.14 086/165] staging: lustre: fix bug in osc_enter_cache_try

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.com>

[ Upstream commit 2fab9faf9b27298c4536c1c1b14072ab18b8f80b ]

The lustre-release patch commit bdc5bb52c554 ("LU-4933 osc:
Automatically increase the max_dirty_mb") changed

-       if (cli->cl_dirty + PAGE_CACHE_SIZE <= cli->cl_dirty_max &&
+       if (cli->cl_dirty_pages < cli->cl_dirty_max_pages &&

When this patch landed in Linux a couple of years later, it landed as

-       if (cli->cl_dirty + PAGE_SIZE <= cli->cl_dirty_max &&
+       if (cli->cl_dirty_pages <= cli->cl_dirty_max_pages &&

which is clearly different ('<=' vs '<'), and allows cl_dirty_pages to
increase beyond cl_dirty_max_pages - which causes a latter assertion
to fails.

Fixes: 3147b268400a ("staging: lustre: osc: Automatically increase the max_dirty_mb")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/lustre/lustre/include/obd.h   |    2 +-
 drivers/staging/lustre/lustre/osc/osc_cache.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/staging/lustre/lustre/include/obd.h
+++ b/drivers/staging/lustre/lustre/include/obd.h
@@ -190,7 +190,7 @@ struct client_obd {
 	struct sptlrpc_flavor    cl_flvr_mgc;   /* fixed flavor of mgc->mgs */
 
 	/* the grant values are protected by loi_list_lock below */
-	unsigned long		 cl_dirty_pages;	/* all _dirty_ in pahges */
+	unsigned long		 cl_dirty_pages;	/* all _dirty_ in pages */
 	unsigned long		 cl_dirty_max_pages;	/* allowed w/o rpc */
 	unsigned long		 cl_dirty_transit;	/* dirty synchronous */
 	unsigned long		 cl_avail_grant;	/* bytes of credit for ost */
--- a/drivers/staging/lustre/lustre/osc/osc_cache.c
+++ b/drivers/staging/lustre/lustre/osc/osc_cache.c
@@ -1528,7 +1528,7 @@ static int osc_enter_cache_try(struct cl
 	if (rc < 0)
 		return 0;
 
-	if (cli->cl_dirty_pages <= cli->cl_dirty_max_pages &&
+	if (cli->cl_dirty_pages < cli->cl_dirty_max_pages &&
 	    atomic_long_read(&obd_dirty_pages) + 1 <= obd_max_dirty_pages) {
 		osc_consume_write_grant(cli, &oap->oap_brw_page);
 		if (transient) {

[PATCH 4.14 087/165] staging: fsl-dpaa2/eth: Fix incorrect casts

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ioana Radulescu <ruxandra.radulescu@nxp.com>

[ Upstream commit 75c583ab9709692a60871d4719006391cde8dc1d ]

The DPAA2 Ethernet driver incorrectly assumes virtual addresses
are always 64b long, which causes compiler errors when building
for a 32b platform.

Fix this by using explicit casts to uintptr_t where necessary.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
+++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
@@ -315,7 +315,7 @@ static int consume_frames(struct dpaa2_e
 		}
 
 		fd = dpaa2_dq_fd(dq);
-		fq = (struct dpaa2_eth_fq *)dpaa2_dq_fqd_ctx(dq);
+		fq = (struct dpaa2_eth_fq *)(uintptr_t)dpaa2_dq_fqd_ctx(dq);
 		fq->stats.frames++;
 
 		fq->consume(priv, ch, fd, &ch->napi);
@@ -1888,7 +1888,7 @@ static int setup_rx_flow(struct dpaa2_et
 	queue.destination.id = fq->channel->dpcon_id;
 	queue.destination.type = DPNI_DEST_DPCON;
 	queue.destination.priority = 1;
-	queue.user_context = (u64)fq;
+	queue.user_context = (u64)(uintptr_t)fq;
 	err = dpni_set_queue(priv->mc_io, 0, priv->mc_token,
 			     DPNI_QUEUE_RX, 0, fq->flowid,
 			     DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST,
@@ -1940,7 +1940,7 @@ static int setup_tx_flow(struct dpaa2_et
 	queue.destination.id = fq->channel->dpcon_id;
 	queue.destination.type = DPNI_DEST_DPCON;
 	queue.destination.priority = 0;
-	queue.user_context = (u64)fq;
+	queue.user_context = (u64)(uintptr_t)fq;
 	err = dpni_set_queue(priv->mc_io, 0, priv->mc_token,
 			     DPNI_QUEUE_TX_CONFIRM, 0, fq->flowid,
 			     DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST,

[PATCH 4.14 088/165] staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit e1a7418529e33bc4efc346324557251a16a3e79b ]

Currently the allocation of priv->oldaddr is not null checked which will
lead to subsequent errors when accessing priv->oldaddr.  Fix this with
a null pointer check and a return of -ENOMEM on allocation failure.

Detected with Coccinelle:
drivers/staging/rtl8192u/r8192U_core.c:1708:2-15: alloc with no test,
possible model on line 1723

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8192u/r8192U_core.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1702,6 +1702,8 @@ static short rtl8192_usb_initendpoints(s
 
 		priv->rx_urb[16] = usb_alloc_urb(0, GFP_KERNEL);
 		priv->oldaddr = kmalloc(16, GFP_KERNEL);
+		if (!priv->oldaddr)
+			return -ENOMEM;
 		oldaddr = priv->oldaddr;
 		align = ((long)oldaddr) & 3;
 		if (align) {

[PATCH 4.14 089/165] staging: ks7010: Use constants from ieee80211_eid instead of literal ints.

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Quytelda Kahja <quytelda@tamalin.org>

[ Upstream commit dc13498ab47fdfae3cda4df712beb2e4244b3fe0 ]

The case statement in get_ap_information() should not use literal integers
to parse information element IDs when these values are provided by name
in 'enum ieee80211_eid' in the header 'linux/ieee80211.h'.

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/ks7010/ks_hostif.c |   31 +++++++++++++++----------------
 drivers/staging/ks7010/ks_hostif.h |    1 +
 2 files changed, 16 insertions(+), 16 deletions(-)

--- a/drivers/staging/ks7010/ks_hostif.c
+++ b/drivers/staging/ks7010/ks_hostif.c
@@ -242,9 +242,8 @@ int get_ap_information(struct ks_wlan_pr
 	offset = 0;
 
 	while (bsize > offset) {
-		/* DPRINTK(4, "Element ID=%d\n",*bp); */
-		switch (*bp) {
-		case 0:	/* ssid */
+		switch (*bp) { /* Information Element ID */
+		case WLAN_EID_SSID:
 			if (*(bp + 1) <= SSID_MAX_SIZE) {
 				ap->ssid.size = *(bp + 1);
 			} else {
@@ -254,8 +253,8 @@ int get_ap_information(struct ks_wlan_pr
 			}
 			memcpy(ap->ssid.body, bp + 2, ap->ssid.size);
 			break;
-		case 1:	/* rate */
-		case 50:	/* ext rate */
+		case WLAN_EID_SUPP_RATES:
+		case WLAN_EID_EXT_SUPP_RATES:
 			if ((*(bp + 1) + ap->rate_set.size) <=
 			    RATE_SET_MAX_SIZE) {
 				memcpy(&ap->rate_set.body[ap->rate_set.size],
@@ -271,9 +270,9 @@ int get_ap_information(struct ks_wlan_pr
 				    (RATE_SET_MAX_SIZE - ap->rate_set.size);
 			}
 			break;
-		case 3:	/* DS parameter */
+		case WLAN_EID_DS_PARAMS:
 			break;
-		case 48:	/* RSN(WPA2) */
+		case WLAN_EID_RSN:
 			ap->rsn_ie.id = *bp;
 			if (*(bp + 1) <= RSN_IE_BODY_MAX) {
 				ap->rsn_ie.size = *(bp + 1);
@@ -284,8 +283,8 @@ int get_ap_information(struct ks_wlan_pr
 			}
 			memcpy(ap->rsn_ie.body, bp + 2, ap->rsn_ie.size);
 			break;
-		case 221:	/* WPA */
-			if (memcmp(bp + 2, "\x00\x50\xf2\x01", 4) == 0) {	/* WPA OUI check */
+		case WLAN_EID_VENDOR_SPECIFIC: /* WPA */
+			if (memcmp(bp + 2, "\x00\x50\xf2\x01", 4) == 0) { /* WPA OUI check */
 				ap->wpa_ie.id = *bp;
 				if (*(bp + 1) <= RSN_IE_BODY_MAX) {
 					ap->wpa_ie.size = *(bp + 1);
@@ -300,18 +299,18 @@ int get_ap_information(struct ks_wlan_pr
 			}
 			break;
 
-		case 2:	/* FH parameter */
-		case 4:	/* CF parameter */
-		case 5:	/* TIM */
-		case 6:	/* IBSS parameter */
-		case 7:	/* Country */
-		case 42:	/* ERP information */
-		case 47:	/* Reserve ID 47 Broadcom AP */
+		case WLAN_EID_FH_PARAMS:
+		case WLAN_EID_CF_PARAMS:
+		case WLAN_EID_TIM:
+		case WLAN_EID_IBSS_PARAMS:
+		case WLAN_EID_COUNTRY:
+		case WLAN_EID_ERP_INFO:
 			break;
 		default:
 			DPRINTK(4, "unknown Element ID=%d\n", *bp);
 			break;
 		}
+
 		offset += 2;	/* id & size field */
 		offset += *(bp + 1);	/* +size offset */
 		bp += (*(bp + 1) + 2);	/* pointer update */
--- a/drivers/staging/ks7010/ks_hostif.h
+++ b/drivers/staging/ks7010/ks_hostif.h
@@ -13,6 +13,7 @@
 #define _KS_HOSTIF_H_
 
 #include <linux/compiler.h>
+#include <linux/ieee80211.h>
 
 /*
  * HOST-MAC I/F events

[PATCH 4.14 090/165] staging: lustre: lmv: correctly iput lmo_root

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.com>

[ Upstream commit 17556cdbe6ed70a6a20e597b228628f7f34387f8 ]

Commit 8f18c8a48b73 ("staging: lustre: lmv: separate master object
with master stripe") changed how lmo_root inodes were managed,
particularly when LMV_HASH_FLAG_MIGRATION is not set.
Previously lsm_md_oinfo[0].lmo_root was always a borrowed
inode reference and didn't need to by iput().
Since the change, that special case only applies when
LMV_HASH_FLAG_MIGRATION is set

In the upstream (lustre-release) version of this patch [Commit
60e07b972114 ("LU-4690 lod: separate master object with master
stripe")] the for loop in the lmv_unpack_md() was changed to count
from 0 and to ignore entry 0 if LMV_HASH_FLAG_MIGRATION is set.
In the patch that got applied to Linux, that change was missing,
so lsm_md_oinfo[0].lmo_root is never iput().
This results in a "VFS: Busy inodes" warning at unmount.

Fixes: 8f18c8a48b73 ("staging: lustre: lmv: separate master object with master stripe")
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/lustre/lustre/lmv/lmv_obd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/lustre/lustre/lmv/lmv_obd.c
+++ b/drivers/staging/lustre/lustre/lmv/lmv_obd.c
@@ -2694,7 +2694,7 @@ static int lmv_unpackmd(struct obd_expor
 	if (lsm && !lmm) {
 		int i;
 
-		for (i = 1; i < lsm->lsm_md_stripe_count; i++) {
+		for (i = 0; i < lsm->lsm_md_stripe_count; i++) {
 			/*
 			 * For migrating inode, the master stripe and master
 			 * object will be the same, so do not need iput, see

[PATCH 4.14 091/165] crypto: inside-secure - wait for the request to complete if in the backlog

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antoine Tenart <antoine.tenart@bootlin.com>

[ Upstream commit 4dc5475ae0375ea4f9283dfd9b2ddc91b20d4c4b ]

This patch updates the safexcel_hmac_init_pad() function to also wait
for completion when the digest return code is -EBUSY, as it would mean
the request is in the backlog to be processed later.

Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/inside-secure/safexcel_hash.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/inside-secure/safexcel_hash.c
+++ b/drivers/crypto/inside-secure/safexcel_hash.c
@@ -819,7 +819,7 @@ static int safexcel_hmac_init_pad(struct
 		init_completion(&result.completion);
 
 		ret = crypto_ahash_digest(areq);
-		if (ret == -EINPROGRESS) {
+		if (ret == -EINPROGRESS || ret == -EBUSY) {
 			wait_for_completion_interruptible(&result.completion);
 			ret = result.error;
 		}

[PATCH 4.14 092/165] crypto: atmel-aes - fix the keys zeroing on errors

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antoine Tenart <antoine.tenart@bootlin.com>

[ Upstream commit 5d804a5157dbaa64872a675923ae87161165c66b ]

The Atmel AES driver uses memzero_explicit on the keys on error, but the
variable zeroed isn't the right one because of a typo. Fix this by using
the right variable.

Fixes: 89a82ef87e01 ("crypto: atmel-authenc - add support to authenc(hmac(shaX), Y(aes)) modes")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/atmel-aes.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/atmel-aes.c
+++ b/drivers/crypto/atmel-aes.c
@@ -2145,7 +2145,7 @@ static int atmel_aes_authenc_setkey(stru
 
 badkey:
 	crypto_aead_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
-	memzero_explicit(&key, sizeof(keys));
+	memzero_explicit(&keys, sizeof(keys));
 	return -EINVAL;
 }
 

[PATCH 4.14 093/165] crypto: ccp - dont disable interrupts while setting up debugfs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 79eb382b5e06a6dca5806465d7195d686a463ab0 ]

I don't why we need take a single write lock and disable interrupts
while setting up debugfs. This is what what happens when we try anyway:

|ccp 0000:03:00.2: enabling device (0000 -> 0002)
|BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:69
|in_atomic(): 1, irqs_disabled(): 1, pid: 3, name: kworker/0:0
|irq event stamp: 17150
|hardirqs last  enabled at (17149): [<0000000097a18c49>] restore_regs_and_return_to_kernel+0x0/0x23
|hardirqs last disabled at (17150): [<000000000773b3a9>] _raw_write_lock_irqsave+0x1b/0x50
|softirqs last  enabled at (17148): [<0000000064d56155>] __do_softirq+0x3b8/0x4c1
|softirqs last disabled at (17125): [<0000000092633c18>] irq_exit+0xb1/0xc0
|CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.16.0-rc2+ #30
|Workqueue: events work_for_cpu_fn
|Call Trace:
| dump_stack+0x7d/0xb6
| ___might_sleep+0x1eb/0x250
| down_write+0x17/0x60
| start_creating+0x4c/0xe0
| debugfs_create_dir+0x9/0x100
| ccp5_debugfs_setup+0x191/0x1b0
| ccp5_init+0x8a7/0x8c0
| ccp_dev_init+0xb8/0xe0
| sp_init+0x6c/0x90
| sp_pci_probe+0x26e/0x590
| local_pci_probe+0x3f/0x90
| work_for_cpu_fn+0x11/0x20
| process_one_work+0x1ff/0x650
| worker_thread+0x1d4/0x3a0
| kthread+0xfe/0x130
| ret_from_fork+0x27/0x50

If any locking is required, a simple mutex will do it.

Cc: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/ccp/ccp-debugfs.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/crypto/ccp/ccp-debugfs.c
+++ b/drivers/crypto/ccp/ccp-debugfs.c
@@ -278,7 +278,7 @@ static const struct file_operations ccp_
 };
 
 static struct dentry *ccp_debugfs_dir;
-static DEFINE_RWLOCK(ccp_debugfs_lock);
+static DEFINE_MUTEX(ccp_debugfs_lock);
 
 #define	MAX_NAME_LEN	20
 
@@ -290,16 +290,15 @@ void ccp5_debugfs_setup(struct ccp_devic
 	struct dentry *debugfs_stats;
 	struct dentry *debugfs_q_instance;
 	struct dentry *debugfs_q_stats;
-	unsigned long flags;
 	int i;
 
 	if (!debugfs_initialized())
 		return;
 
-	write_lock_irqsave(&ccp_debugfs_lock, flags);
+	mutex_lock(&ccp_debugfs_lock);
 	if (!ccp_debugfs_dir)
 		ccp_debugfs_dir = debugfs_create_dir(KBUILD_MODNAME, NULL);
-	write_unlock_irqrestore(&ccp_debugfs_lock, flags);
+	mutex_unlock(&ccp_debugfs_lock);
 	if (!ccp_debugfs_dir)
 		return;
 

[PATCH 4.14 094/165] crypto: inside-secure - do not process request if no command was issued

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antoine Tenart <antoine.tenart@bootlin.com>

[ Upstream commit 95831ceafc0de7d94a5fe86ebb1c2042317cc2cd ]

This patch adds a check in the SafeXcel dequeue function, to avoid
processing request further if no hardware command was issued. This can
happen in certain cases where the ->send() function caches all the data
that would have been send.

Fixes: 809778e02cd4 ("crypto: inside-secure - fix hash when length is a multiple of a block")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/inside-secure/safexcel.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/crypto/inside-secure/safexcel.c
+++ b/drivers/crypto/inside-secure/safexcel.c
@@ -462,6 +462,15 @@ void safexcel_dequeue(struct safexcel_cr
 		if (backlog)
 			backlog->complete(backlog, -EINPROGRESS);
 
+		/* In case the send() helper did not issue any command to push
+		 * to the engine because the input data was cached, continue to
+		 * dequeue other requests as this is valid and not an error.
+		 */
+		if (!commands && !results) {
+			kfree(request);
+			continue;
+		}
+
 		spin_lock_bh(&priv->ring[ring].egress_lock);
 		list_add_tail(&request->list, &priv->ring[ring].list);
 		spin_unlock_bh(&priv->ring[ring].egress_lock);

[PATCH 4.14 095/165] crypto: inside-secure - fix the cache_len computation

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antoine Tenart <antoine.tenart@bootlin.com>

[ Upstream commit 666a9c70b04fccabde5cea5e680ae1ae92460a62 ]

This patch fixes the cache length computation as cache_len could end up
being a negative value. The check between the queued size and the
block size is updated to reflect the caching mechanism which can cache
up to a full block size (included!).

Fixes: 809778e02cd4 ("crypto: inside-secure - fix hash when length is a multiple of a block")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/inside-secure/safexcel_hash.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/inside-secure/safexcel_hash.c
+++ b/drivers/crypto/inside-secure/safexcel_hash.c
@@ -185,7 +185,7 @@ static int safexcel_ahash_send_req(struc
 	int i, queued, len, cache_len, extra, n_cdesc = 0, ret = 0;
 
 	queued = len = req->len - req->processed;
-	if (queued < crypto_ahash_blocksize(ahash))
+	if (queued <= crypto_ahash_blocksize(ahash))
 		cache_len = queued;
 	else
 		cache_len = queued - areq->nbytes;

[PATCH 4.14 096/165] crypto: inside-secure - fix the extra cache computation

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antoine Tenart <antoine.tenart@bootlin.com>

[ Upstream commit c1a8fa6e240ed4b99778d48ab790743565cb61c8 ]

This patch fixes the extra cache computation when the queued data is a
multiple of a block size. This fixes the hash support in some cases.

Fixes: 809778e02cd4 ("crypto: inside-secure - fix hash when length is a multiple of a block")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/inside-secure/safexcel_hash.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/inside-secure/safexcel_hash.c
+++ b/drivers/crypto/inside-secure/safexcel_hash.c
@@ -199,7 +199,7 @@ static int safexcel_ahash_send_req(struc
 			/* If this is not the last request and the queued data
 			 * is a multiple of a block, cache the last one for now.
 			 */
-			extra = queued - crypto_ahash_blocksize(ahash);
+			extra = crypto_ahash_blocksize(ahash);
 
 		if (extra) {
 			sg_pcopy_to_buffer(areq->src, sg_nents(areq->src),

[PATCH 4.14 097/165] crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ss

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Robinson <pbrobinson@gmail.com>

[ Upstream commit 7c73cf4cc2ac16465f5102437dc0a12d66671bd6 ]

The MODULE_ALIAS is required to enable the sun4i-ss driver to load
automatically when built at a module. Tested on a Cubietruck.

Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/sunxi-ss/sun4i-ss-core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/crypto/sunxi-ss/sun4i-ss-core.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
@@ -451,6 +451,7 @@ static struct platform_driver sun4i_ss_d
 
 module_platform_driver(sun4i_ss_driver);
 
+MODULE_ALIAS("platform:sun4i-ss");
 MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");

[PATCH 4.14 098/165] crypto: inside-secure - fix the invalidation step during cra_exit

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antoine Tenart <antoine.tenart@bootlin.com>

[ Upstream commit b7007dbccd92f7b8c00e590020bee542a48c6a2c ]

When exiting a transformation, the cra_exit() helper is called in each
driver providing one. The Inside Secure SafeXcel driver has one, which
is responsible of freeing some areas and of sending one invalidation
request to the crypto engine, to invalidate the context that was used
during the transformation.

We could see in some setups (when lots of transformations were being
used with a short lifetime, and hence lots of cra_exit() calls) NULL
pointer dereferences and other weird issues. All these issues were
coming from accessing the tfm context.

The issue is the invalidation request completion is checked using a
wait_for_completion_interruptible() call in both the cipher and hash
cra_exit() helpers. In some cases this was interrupted while the
invalidation request wasn't processed yet. And then cra_exit() returned,
and its caller was freeing the tfm instance. Only then the request was
being handled by the SafeXcel driver, which lead to the said issues.

This patch fixes this by using wait_for_completion() calls in these
specific cases.

Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/inside-secure/safexcel_cipher.c |    2 +-
 drivers/crypto/inside-secure/safexcel_hash.c   |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/crypto/inside-secure/safexcel_cipher.c
+++ b/drivers/crypto/inside-secure/safexcel_cipher.c
@@ -446,7 +446,7 @@ static int safexcel_cipher_exit_inv(stru
 	if (!priv->ring[ring].need_dequeue)
 		safexcel_dequeue(priv, ring);
 
-	wait_for_completion_interruptible(&result.completion);
+	wait_for_completion(&result.completion);
 
 	if (result.error) {
 		dev_warn(priv->dev,
--- a/drivers/crypto/inside-secure/safexcel_hash.c
+++ b/drivers/crypto/inside-secure/safexcel_hash.c
@@ -494,7 +494,7 @@ static int safexcel_ahash_exit_inv(struc
 	if (!priv->ring[ring].need_dequeue)
 		safexcel_dequeue(priv, ring);
 
-	wait_for_completion_interruptible(&result.completion);
+	wait_for_completion(&result.completion);
 
 	if (result.error) {
 		dev_warn(priv->dev, "hash: completion error (%d)\n",

[PATCH 4.14 099/165] scsi: mpt3sas: fix an out of bound write

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomas Henzl <thenzl@redhat.com>

[ Upstream commit 4a8842de8db4953fdda7866626b78b12fb8adb97 ]

cpu_msix_table is allocated to store online cpus, but pci_irq_get_affinity
may return cpu_possible_mask which is then used to access cpu_msix_table.
That causes bad user experience.  Fix limits access to only online cpus,
I've also added an additional test to protect from an unlikely change in
cpu_online_mask.

[mkp: checkpatch]

Fixes: 1d55abc0e98a ("scsi: mpt3sas: switch to pci_alloc_irq_vectors")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -1921,8 +1921,11 @@ _base_assign_reply_queues(struct MPT3SAS
 				continue;
 			}
 
-			for_each_cpu(cpu, mask)
+			for_each_cpu_and(cpu, mask, cpu_online_mask) {
+				if (cpu >= ioc->cpu_msix_table_sz)
+					break;
 				ioc->cpu_msix_table[cpu] = reply_q->msix_index;
+			}
 		}
 		return;
 	}

[PATCH 4.14 100/165] scsi: qla2xxx: Fix memory corruption during hba reset test

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Quinn Tran <quinn.tran@cavium.com>

[ Upstream commit 2ce87cc5b269510de9ca1185ca8a6e10ec78c069 ]

This patch fixes memory corrpution while performing HBA Reset test.

Following stack trace is seen:

[  466.397219] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[  466.433669] IP: [<ffffffffc06f5dd0>] qlt_free_session_done+0x260/0x5f0 [qla2xxx]
[  466.467731] PGD 0
[  466.476718] Oops: 0000 [#1] SMP

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/qla2xxx/qla_os.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -3581,6 +3581,8 @@ qla2x00_remove_one(struct pci_dev *pdev)
 	}
 	qla2x00_wait_for_hba_ready(base_vha);
 
+	qla2x00_wait_for_sess_deletion(base_vha);
+
 	/*
 	 * if UNLOAD flag is already set, then continue unload,
 	 * where it was set first.

[PATCH 4.14 101/165] scsi: ufs: Enable quirk to ignore sending WRITE_SAME command

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sujit Reddy Thumma <sthumma@codeaurora.org>

[ Upstream commit 84af7e8b895088d89f246d6b0f82717fafdebf61 ]

WRITE_SAME command is not supported by UFS. Enable a quirk for the upper
level drivers to not send WRITE SAME command.

[mkp: botched patch, applied by hand]

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufshcd.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4347,6 +4347,8 @@ static int ufshcd_slave_alloc(struct scs
 	/* REPORT SUPPORTED OPERATION CODES is not supported */
 	sdev->no_report_opcodes = 1;
 
+	/* WRITE_SAME command is not supported */
+	sdev->no_write_same = 1;
 
 	ufshcd_set_queue_depth(sdev);
 

[PATCH 4.14 102/165] scsi: bnx2fc: Fix check in SCSI completion handler for timed out request

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chad Dupuis <chad.dupuis@cavium.com>

[ Upstream commit ecf7ff49945f5741fa1da112f994939f942031d3 ]

When a request times out we set the io_req flag BNX2FC_FLAG_IO_COMPL so
that if a subsequent completion comes in on that task ID we will ignore
it.  The issue is that in the check for this flag there is a missing
return so we will continue to process a request which may have already
been returned to the ownership of the SCSI layer.  This can cause
unpredictable results.

Solution is to add in the missing return.

[mkp: typo plus title shortening]

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/bnx2fc/bnx2fc_io.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1865,6 +1865,7 @@ void bnx2fc_process_scsi_cmd_compl(struc
 		/* we will not receive ABTS response for this IO */
 		BNX2FC_IO_DBG(io_req, "Timer context finished processing "
 			   "this scsi cmd\n");
+		return;
 	}
 
 	/* Cancel the timeout_work, as we received IO completion */

[PATCH 4.14 103/165] scsi: sym53c8xx_2: iterator underflow in sym_getsync()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e6f791d95313c85f3dd4a26141e28e50ae9aa0ae ]

We wanted to exit the loop with "div" set to zero, but instead, if we
don't hit the break then "div" is -1 when we finish the loop.  It leads
to an array underflow a few lines later.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/sym53c8xx_2/sym_hipd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -536,7 +536,7 @@ sym_getsync(struct sym_hcb *np, u_char d
 	 *  Look for the greatest clock divisor that allows an 
 	 *  input speed faster than the period.
 	 */
-	while (div-- > 0)
+	while (--div > 0)
 		if (kpc >= (div_10M[div] << 2)) break;
 
 	/*

[PATCH 4.14 104/165] scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit a7043e9529f3c367cc4d82997e00be034cbe57ca ]

My static checker complains about an out of bounds read:

    drivers/message/fusion/mptctl.c:2786 mptctl_hp_targetinfo()
    error: buffer overflow 'hd->sel_timeout' 255 <= u32max.

It's true that we probably should have a bounds check here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/message/fusion/mptctl.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -2698,6 +2698,8 @@ mptctl_hp_targetinfo(unsigned long arg)
 				__FILE__, __LINE__, iocnum);
 		return -ENODEV;
 	}
+	if (karg.hdr.id >= MPT_MAX_FC_DEVICES)
+		return -EINVAL;
 	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_hp_targetinfo called.\n",
 	    ioc->name));
 

[PATCH 4.14 105/165] scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bart.vanassche@wdc.com>

[ Upstream commit c02189e12ce3bf3808cb880569d3b10249f50bd9 ]

A left shift must shift less than the bit width of the left argument.
Avoid triggering undefined behavior if ha->mbx_count == 32.

This patch avoids that UBSAN reports the following complaint:

UBSAN: Undefined behaviour in drivers/scsi/qla2xxx/qla_isr.c:275:14
shift exponent 32 is too large for 32-bit type 'int'
Call Trace:
 dump_stack+0x4e/0x6c
 ubsan_epilogue+0xd/0x3b
 __ubsan_handle_shift_out_of_bounds+0x112/0x14c
 qla2x00_mbx_completion+0x1c5/0x25d [qla2xxx]
 qla2300_intr_handler+0x1ea/0x3bb [qla2xxx]
 qla2x00_mailbox_command+0x77b/0x139a [qla2xxx]
 qla2x00_mbx_reg_test+0x83/0x114 [qla2xxx]
 qla2x00_chip_diag+0x354/0x45f [qla2xxx]
 qla2x00_initialize_adapter+0x2c2/0xa4e [qla2xxx]
 qla2x00_probe_one+0x1681/0x392e [qla2xxx]
 pci_device_probe+0x10b/0x1f1
 driver_probe_device+0x21f/0x3a4
 __driver_attach+0xa9/0xe1
 bus_for_each_dev+0x6e/0xb5
 driver_attach+0x22/0x3c
 bus_add_driver+0x1d1/0x2ae
 driver_register+0x78/0x130
 __pci_register_driver+0x75/0xa8
 qla2x00_module_init+0x21b/0x267 [qla2xxx]
 do_one_initcall+0x5a/0x1e2
 do_init_module+0x9d/0x285
 load_module+0x20db/0x38e3
 SYSC_finit_module+0xa8/0xbc
 SyS_finit_module+0x9/0xb
 do_syscall_64+0x77/0x271
 entry_SYSCALL64_slow_path+0x25/0x25

Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/qla2xxx/qla_isr.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -272,7 +272,8 @@ qla2x00_mbx_completion(scsi_qla_host_t *
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
 	/* Read all mbox registers? */
-	mboxes = (1 << ha->mbx_count) - 1;
+	WARN_ON_ONCE(ha->mbx_count > 32);
+	mboxes = (1ULL << ha->mbx_count) - 1;
 	if (!ha->mcp)
 		ql_dbg(ql_dbg_async, vha, 0x5001, "MBX pointer ERROR.\n");
 	else
@@ -2821,7 +2822,8 @@ qla24xx_mbx_completion(scsi_qla_host_t *
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 
 	/* Read all mbox registers? */
-	mboxes = (1 << ha->mbx_count) - 1;
+	WARN_ON_ONCE(ha->mbx_count > 32);
+	mboxes = (1ULL << ha->mbx_count) - 1;
 	if (!ha->mcp)
 		ql_dbg(ql_dbg_async, vha, 0x504e, "MBX pointer ERROR.\n");
 	else

[PATCH 4.14 106/165] scsi: storvsc: Increase cmd_per_lun for higher speed devices

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>

[ Upstream commit cabe92a55e3a12005a4ac4d3954c9a174b0efe2a ]

Increase cmd_per_lun to allow more I/Os in progress per device,
particularly for NVMe's.  The Hyper-V host side can handle the higher
count with no issues.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/storvsc_drv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1661,7 +1661,7 @@ static struct scsi_host_template scsi_dr
 	.eh_timed_out =		storvsc_eh_timed_out,
 	.slave_alloc =		storvsc_device_alloc,
 	.slave_configure =	storvsc_device_configure,
-	.cmd_per_lun =		255,
+	.cmd_per_lun =		2048,
 	.this_id =		-1,
 	.use_clustering =	ENABLE_CLUSTERING,
 	/* Make sure we dont get a sg segment crosses a page boundary */

[PATCH 4.14 107/165] scsi: qedi: Fix truncation of CHAP name and secret

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Vasquez <andrew.vasquez@cavium.com>

[ Upstream commit 1683ce57f568c7c92d53e9234624a53554a29cd5 ]

The data in NVRAM is not guaranteed to be NUL terminated.  Since
snprintf expects byte-stream to accommodate null byte, the CHAP secret
is truncated.  Use sprintf instead of snprintf to fix the truncation of
CHAP name and secret.

Signed-off-by: Andrew Vasquez <andrew.vasquez@cavium.com>
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Chris Leech <cleech@redhat.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/qedi/qedi_main.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/drivers/scsi/qedi/qedi_main.c
+++ b/drivers/scsi/qedi/qedi_main.c
@@ -1840,8 +1840,8 @@ static ssize_t qedi_show_boot_ini_info(v
 
 	switch (type) {
 	case ISCSI_BOOT_INI_INITIATOR_NAME:
-		rc = snprintf(str, NVM_ISCSI_CFG_ISCSI_NAME_MAX_LEN, "%s\n",
-			      initiator->initiator_name.byte);
+		rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_ISCSI_NAME_MAX_LEN,
+			     initiator->initiator_name.byte);
 		break;
 	default:
 		rc = 0;
@@ -1908,8 +1908,8 @@ qedi_show_boot_tgt_info(struct qedi_ctx
 
 	switch (type) {
 	case ISCSI_BOOT_TGT_NAME:
-		rc = snprintf(str, NVM_ISCSI_CFG_ISCSI_NAME_MAX_LEN, "%s\n",
-			      block->target[idx].target_name.byte);
+		rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_ISCSI_NAME_MAX_LEN,
+			     block->target[idx].target_name.byte);
 		break;
 	case ISCSI_BOOT_TGT_IP_ADDR:
 		if (ipv6_en)
@@ -1930,20 +1930,20 @@ qedi_show_boot_tgt_info(struct qedi_ctx
 			      block->target[idx].lun.value[0]);
 		break;
 	case ISCSI_BOOT_TGT_CHAP_NAME:
-		rc = snprintf(str, NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN, "%s\n",
-			      chap_name);
+		rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
+			     chap_name);
 		break;
 	case ISCSI_BOOT_TGT_CHAP_SECRET:
-		rc = snprintf(str, NVM_ISCSI_CFG_CHAP_PWD_MAX_LEN, "%s\n",
-			      chap_secret);
+		rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
+			     chap_secret);
 		break;
 	case ISCSI_BOOT_TGT_REV_CHAP_NAME:
-		rc = snprintf(str, NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN, "%s\n",
-			      mchap_name);
+		rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
+			     mchap_name);
 		break;
 	case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
-		rc = snprintf(str, NVM_ISCSI_CFG_CHAP_PWD_MAX_LEN, "%s\n",
-			      mchap_secret);
+		rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
+			     mchap_secret);
 		break;
 	case ISCSI_BOOT_TGT_FLAGS:
 		rc = snprintf(str, 3, "%hhd\n", SYSFS_FLAG_FW_SEL_BOOT);

[PATCH 4.14 108/165] scsi: aacraid: fix shutdown crash when init fails

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Meelis Roos <mroos@linux.ee>

[ Upstream commit 00c20cdc79259c6c5bf978b21af96c2d3edb646d ]

When aacraid init fails with "AAC0: adapter self-test failed.", shutdown
leads to UBSAN warning and then oops:

[154316.118423] ================================================================================
[154316.118508] UBSAN: Undefined behaviour in drivers/scsi/scsi_lib.c:2328:27
[154316.118566] member access within null pointer of type 'struct Scsi_Host'
[154316.118631] CPU: 2 PID: 14530 Comm: reboot Tainted: G        W        4.15.0-dirty #89
[154316.118701] Hardware name: Hewlett Packard HP NetServer/HP System Board, BIOS 4.06.46 PW 06/25/2003
[154316.118774] Call Trace:
[154316.118848]  dump_stack+0x48/0x65
[154316.118916]  ubsan_epilogue+0xe/0x40
[154316.118976]  __ubsan_handle_type_mismatch+0xfb/0x180
[154316.119043]  scsi_block_requests+0x20/0x30
[154316.119135]  aac_shutdown+0x18/0x40 [aacraid]
[154316.119196]  pci_device_shutdown+0x33/0x50
[154316.119269]  device_shutdown+0x18a/0x390
[...]
[154316.123435] BUG: unable to handle kernel NULL pointer dereference at 000000f4
[154316.123515] IP: scsi_block_requests+0xa/0x30

This is because aac_shutdown() does

        struct Scsi_Host *shost = pci_get_drvdata(dev);
        scsi_block_requests(shost);

and that assumes shost has been assigned with pci_set_drvdata().

However, pci_set_drvdata(pdev, shost) is done in aac_probe_one() far
after bailing out with error from calling the init function
((*aac_drivers[index].init)(aac)), and when the init function fails, no
error is returned from aac_probe_one() so PCI layer assumes there is
driver attached, and tries to shut it down later.

Fix it by returning error from aac_probe_one() when card-specific init
function fails.

This fixes reboot on my HP NetRAID-4M with dead battery.

Signed-off-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/aacraid/linit.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1690,8 +1690,10 @@ static int aac_probe_one(struct pci_dev
 	 *	Map in the registers from the adapter.
 	 */
 	aac->base_size = AAC_MIN_FOOTPRINT_SIZE;
-	if ((*aac_drivers[index].init)(aac))
+	if ((*aac_drivers[index].init)(aac)) {
+		error = -ENODEV;
 		goto out_unmap;
+	}
 
 	if (aac->sync_mode) {
 		if (aac_sync_mode)

[PATCH 4.14 109/165] scsi: qla4xxx: skip error recovery in case of register disconnect.

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Manish Rangankar <manish.rangankar@cavium.com>

[ Upstream commit 1bc5ad3a6acdcf56f83272f2de1cd2389ea9e9e2 ]

A system crashes when continuously removing/re-adding the storage
controller.

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/qla4xxx/ql4_def.h |    2 +
 drivers/scsi/qla4xxx/ql4_os.c  |   46 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+)

--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -168,6 +168,8 @@
 #define DEV_DB_NON_PERSISTENT	0
 #define DEV_DB_PERSISTENT	1
 
+#define QL4_ISP_REG_DISCONNECT 0xffffffffU
+
 #define COPY_ISID(dst_isid, src_isid) {			\
 	int i, j;					\
 	for (i = 0, j = ISID_SIZE - 1; i < ISID_SIZE;)	\
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -262,6 +262,24 @@ static struct iscsi_transport qla4xxx_is
 
 static struct scsi_transport_template *qla4xxx_scsi_transport;
 
+static int qla4xxx_isp_check_reg(struct scsi_qla_host *ha)
+{
+	u32 reg_val = 0;
+	int rval = QLA_SUCCESS;
+
+	if (is_qla8022(ha))
+		reg_val = readl(&ha->qla4_82xx_reg->host_status);
+	else if (is_qla8032(ha) || is_qla8042(ha))
+		reg_val = qla4_8xxx_rd_direct(ha, QLA8XXX_PEG_ALIVE_COUNTER);
+	else
+		reg_val = readw(&ha->reg->ctrl_status);
+
+	if (reg_val == QL4_ISP_REG_DISCONNECT)
+		rval = QLA_ERROR;
+
+	return rval;
+}
+
 static int qla4xxx_send_ping(struct Scsi_Host *shost, uint32_t iface_num,
 			     uint32_t iface_type, uint32_t payload_size,
 			     uint32_t pid, struct sockaddr *dst_addr)
@@ -9188,10 +9206,17 @@ static int qla4xxx_eh_abort(struct scsi_
 	struct srb *srb = NULL;
 	int ret = SUCCESS;
 	int wait = 0;
+	int rval;
 
 	ql4_printk(KERN_INFO, ha, "scsi%ld:%d:%llu: Abort command issued cmd=%p, cdb=0x%x\n",
 		   ha->host_no, id, lun, cmd, cmd->cmnd[0]);
 
+	rval = qla4xxx_isp_check_reg(ha);
+	if (rval != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
+		return FAILED;
+	}
+
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	srb = (struct srb *) CMD_SP(cmd);
 	if (!srb) {
@@ -9243,6 +9268,7 @@ static int qla4xxx_eh_device_reset(struc
 	struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
 	struct ddb_entry *ddb_entry = cmd->device->hostdata;
 	int ret = FAILED, stat;
+	int rval;
 
 	if (!ddb_entry)
 		return ret;
@@ -9262,6 +9288,12 @@ static int qla4xxx_eh_device_reset(struc
 		      cmd, jiffies, cmd->request->timeout / HZ,
 		      ha->dpc_flags, cmd->result, cmd->allowed));
 
+	rval = qla4xxx_isp_check_reg(ha);
+	if (rval != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
+		return FAILED;
+	}
+
 	/* FIXME: wait for hba to go online */
 	stat = qla4xxx_reset_lun(ha, ddb_entry, cmd->device->lun);
 	if (stat != QLA_SUCCESS) {
@@ -9305,6 +9337,7 @@ static int qla4xxx_eh_target_reset(struc
 	struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
 	struct ddb_entry *ddb_entry = cmd->device->hostdata;
 	int stat, ret;
+	int rval;
 
 	if (!ddb_entry)
 		return FAILED;
@@ -9322,6 +9355,12 @@ static int qla4xxx_eh_target_reset(struc
 		      ha->host_no, cmd, jiffies, cmd->request->timeout / HZ,
 		      ha->dpc_flags, cmd->result, cmd->allowed));
 
+	rval = qla4xxx_isp_check_reg(ha);
+	if (rval != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
+		return FAILED;
+	}
+
 	stat = qla4xxx_reset_target(ha, ddb_entry);
 	if (stat != QLA_SUCCESS) {
 		starget_printk(KERN_INFO, scsi_target(cmd->device),
@@ -9376,9 +9415,16 @@ static int qla4xxx_eh_host_reset(struct
 {
 	int return_status = FAILED;
 	struct scsi_qla_host *ha;
+	int rval;
 
 	ha = to_qla_host(cmd->device->host);
 
+	rval = qla4xxx_isp_check_reg(ha);
+	if (rval != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
+		return FAILED;
+	}
+
 	if ((is_qla8032(ha) || is_qla8042(ha)) && ql4xdontresethba)
 		qla4_83xx_set_idc_dontreset(ha);
 

[PATCH 4.14 110/165] scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit e39a97353e5378eb46bf01679799c5704d397f32 ]

When converting __scsi_error_from_host_byte() to BLK_STS error codes the
case DID_OK was forgotten, resulting in it always returning an error.

Fixes: 2a842acab109 ("block: introduce new block status code type")
Cc: Doug Gilbert <dgilbert@interlog.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/scsi_lib.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -720,6 +720,8 @@ static blk_status_t __scsi_error_from_ho
 		int result)
 {
 	switch (host_byte(result)) {
+	case DID_OK:
+		return BLK_STS_OK;
 	case DID_TRANSPORT_FAILFAST:
 		return BLK_STS_TRANSPORT;
 	case DID_TARGET_FAILURE:

[PATCH 4.14 111/165] scsi: qedi: Fix kernel crash during port toggle

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Manish Rangankar <manish.rangankar@cavium.com>

[ Upstream commit 967823d6c3980a30e214b92bfe6a101e7b46d025 ]

BUG: unable to handle kernel NULL pointer dereference at 0000000000000100

[  985.596918] IP: _raw_spin_lock_bh+0x17/0x30
[  985.601581] PGD 0 P4D 0
[  985.604405] Oops: 0002 [#1] SMP
:
[  985.704533] CPU: 16 PID: 1156 Comm: qedi_thread/16 Not tainted 4.16.0-rc2 #1
[  985.712397] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.4.3 01/17/2017
[  985.720747] RIP: 0010:_raw_spin_lock_bh+0x17/0x30
[  985.725996] RSP: 0018:ffffa4b1c43d3e10 EFLAGS: 00010246
[  985.731823] RAX: 0000000000000000 RBX: ffff94a31bd03000 RCX: 0000000000000000
[  985.739783] RDX: 0000000000000001 RSI: ffff94a32fa16938 RDI: 0000000000000100
[  985.747744] RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000a33
[  985.755703] R10: 0000000000000000 R11: ffffa4b1c43d3af0 R12: 0000000000000000
[  985.763662] R13: ffff94a301f40818 R14: 0000000000000000 R15: 000000000000000c
[  985.771622] FS:  0000000000000000(0000) GS:ffff94a32fa00000(0000) knlGS:0000000000000000
[  985.780649] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  985.787057] CR2: 0000000000000100 CR3: 000000067a009006 CR4: 00000000001606e0
[  985.795017] Call Trace:
[  985.797747]  qedi_fp_process_cqes+0x258/0x980 [qedi]
[  985.803294]  qedi_percpu_io_thread+0x10f/0x1b0 [qedi]
[  985.808931]  kthread+0xf5/0x130
[  985.812434]  ? qedi_free_uio+0xd0/0xd0 [qedi]
[  985.817298]  ? kthread_bind+0x10/0x10
[  985.821372]  ? do_syscall_64+0x6e/0x1a0

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/qedi/qedi_fw.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/scsi/qedi/qedi_fw.c
+++ b/drivers/scsi/qedi/qedi_fw.c
@@ -769,6 +769,11 @@ static void qedi_process_cmd_cleanup_res
 
 	iscsi_cid = cqe->conn_id;
 	qedi_conn = qedi->cid_que.conn_cid_tbl[iscsi_cid];
+	if (!qedi_conn) {
+		QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_INFO,
+			  "icid not found 0x%x\n", cqe->conn_id);
+		return;
+	}
 
 	/* Based on this itt get the corresponding qedi_cmd */
 	spin_lock_bh(&qedi_conn->tmf_work_lock);

[PATCH 4.14 112/165] scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit 864449eea7c600596e305ffdc4a6a846414b222c ]

The firmware event workqueue should not be marked as WQ_MEM_RECLAIM
as it's doesn't need to make forward progress under memory pressure.
In the current state it will result in a deadlock if the device had been
forcefully removed.

Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -8941,7 +8941,7 @@ _scsih_probe(struct pci_dev *pdev, const
 	snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
 	    "fw_event_%s%d", ioc->driver_name, ioc->id);
 	ioc->firmware_event_thread = alloc_ordered_workqueue(
-	    ioc->firmware_event_name, WQ_MEM_RECLAIM);
+	    ioc->firmware_event_name, 0);
 	if (!ioc->firmware_event_thread) {
 		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
 		    ioc->name, __FILE__, __LINE__, __func__);

[PATCH 4.14 113/165] scsi: sd: Keep disk read-only when re-reading partition

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeremy Cline <jeremy@jcline.org>

[ Upstream commit 20bd1d026aacc5399464f8328f305985c493cde3 ]

If the read-only flag is true on a SCSI disk, re-reading the partition
table sets the flag back to false.

To observe this bug, you can run:

1. blockdev --setro /dev/sda
2. blockdev --rereadpt /dev/sda
3. blockdev --getro /dev/sda

This commit reads the disk's old state and combines it with the device
disk-reported state rather than unconditionally marking it as RW.

Reported-by: Li Ning <lining916740672@icloud.com>
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/sd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2608,6 +2608,7 @@ sd_read_write_protect_flag(struct scsi_d
 	int res;
 	struct scsi_device *sdp = sdkp->device;
 	struct scsi_mode_data data;
+	int disk_ro = get_disk_ro(sdkp->disk);
 	int old_wp = sdkp->write_prot;
 
 	set_disk_ro(sdkp->disk, 0);
@@ -2648,7 +2649,7 @@ sd_read_write_protect_flag(struct scsi_d
 			  "Test WP failed, assume Write Enabled\n");
 	} else {
 		sdkp->write_prot = ((data.device_specific & 0x80) != 0);
-		set_disk_ro(sdkp->disk, sdkp->write_prot);
+		set_disk_ro(sdkp->disk, sdkp->write_prot || disk_ro);
 		if (sdkp->first_scan || old_wp != sdkp->write_prot) {
 			sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
 				  sdkp->write_prot ? "on" : "off");

[PATCH 4.14 114/165] scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabled

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jianchao Wang <jianchao.w.wang@oracle.com>

[ Upstream commit 89d0c804392bb962553f23dc4c119d11b6bd1675 ]

iscsi tcp will first send out data, then calculate and send data
digest. If we don't have BDI_CAP_STABLE_WRITES, the page cache will be
written in spite of the on going writeback. Consequently, wrong digest
will be got and sent to target.

To fix this, set BDI_CAP_STABLE_WRITES when data digest is enabled
in iscsi_tcp .slave_configure callback.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Acked-by: Chris Leech <cleech@redhat.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/iscsi_tcp.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -37,6 +37,7 @@
 #include <linux/kfifo.h>
 #include <linux/scatterlist.h>
 #include <linux/module.h>
+#include <linux/backing-dev.h>
 #include <net/tcp.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -952,6 +953,13 @@ static int iscsi_sw_tcp_slave_alloc(stru
 
 static int iscsi_sw_tcp_slave_configure(struct scsi_device *sdev)
 {
+	struct iscsi_sw_tcp_host *tcp_sw_host = iscsi_host_priv(sdev->host);
+	struct iscsi_session *session = tcp_sw_host->session;
+	struct iscsi_conn *conn = session->leadconn;
+
+	if (conn->datadgst_en)
+		sdev->request_queue->backing_dev_info->capabilities
+			|= BDI_CAP_STABLE_WRITES;
 	blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_ANY);
 	blk_queue_dma_alignment(sdev->request_queue, 0);
 	return 0;

[PATCH 4.14 115/165] scsi: aacraid: Insure command thread is not recursively stopped

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Carroll <david.carroll@microsemi.com>

[ Upstream commit 1c6b41fb92936fa5facea464d5d7cbf855966d04 ]

If a recursive IOP_RESET is invoked, usually due to the eh_thread
handling errors after the first reset, be sure we flag that the command
thread has been stopped to avoid an Oops of the form;

 [ 336.620256] CPU: 28 PID: 1193 Comm: scsi_eh_0 Kdump: loaded Not tainted 4.14.0-49.el7a.ppc64le #1
 [ 336.620297] task: c000003fd630b800 task.stack: c000003fd61a4000
 [ 336.620326] NIP: c000000000176794 LR: c00000000013038c CTR: c00000000024bc10
 [ 336.620361] REGS: c000003fd61a7720 TRAP: 0300 Not tainted (4.14.0-49.el7a.ppc64le)
 [ 336.620395] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 22084022 XER: 20040000
 [ 336.620435] CFAR: c000000000130388 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1
 [ 336.620435] GPR00: c00000000013038c c000003fd61a79a0 c0000000014c7e00 0000000000000000
 [ 336.620435] GPR04: 000000000000000c 000000000000000c 9000000000009033 0000000000000477
 [ 336.620435] GPR08: 0000000000000477 0000000000000000 0000000000000000 c008000010f7d940
 [ 336.620435] GPR12: c00000000024bc10 c000000007a33400 c0000000001708a8 c000003fe3b881d8
 [ 336.620435] GPR16: c000003fe3b88060 c000003fd61a7d10 fffffffffffff000 000000000000001e
 [ 336.620435] GPR20: 0000000000000001 c000000000ebf1a0 0000000000000001 c000003fe3b88000
 [ 336.620435] GPR24: 0000000000000003 0000000000000002 c000003fe3b88840 c000003fe3b887e8
 [ 336.620435] GPR28: c000003fe3b88000 c000003fc8181788 0000000000000000 c000003fc8181700
 [ 336.620750] NIP [c000000000176794] exit_creds+0x34/0x160
 [ 336.620775] LR [c00000000013038c] __put_task_struct+0x8c/0x1f0
 [ 336.620804] Call Trace:
 [ 336.620817] [c000003fd61a79a0] [c000003fe3b88000] 0xc000003fe3b88000 (unreliable)
 [ 336.620853] [c000003fd61a79d0] [c00000000013038c] __put_task_struct+0x8c/0x1f0
 [ 336.620889] [c000003fd61a7a00] [c000000000171418] kthread_stop+0x1e8/0x1f0
 [ 336.620922] [c000003fd61a7a40] [c008000010f7448c] aac_reset_adapter+0x14c/0x8d0 [aacraid]
 [ 336.620959] [c000003fd61a7b00] [c008000010f60174] aac_eh_host_reset+0x84/0x100 [aacraid]
 [ 336.621010] [c000003fd61a7b30] [c000000000864f24] scsi_try_host_reset+0x74/0x180
 [ 336.621046] [c000003fd61a7bb0] [c000000000867ac0] scsi_eh_ready_devs+0xc00/0x14d0
 [ 336.625165] [c000003fd61a7ca0] [c0000000008699e0] scsi_error_handler+0x550/0x730
 [ 336.632101] [c000003fd61a7dc0] [c000000000170a08] kthread+0x168/0x1b0
 [ 336.639031] [c000003fd61a7e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4
 [ 336.645971] Instruction dump:
 [ 336.648743] 384216a0 7c0802a6 fbe1fff8 f8010010 f821ffd1 7c7f1b78 60000000 60000000
 [ 336.657056] 39400000 e87f0838 f95f0838 7c0004ac <7d401828> 314affff 7d40192d 40c2fff4
 [ 336.663997] -[ end trace 4640cf8d4945ad95 ]-

So flag when the thread is stopped by setting the thread pointer to NULL.

Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/aacraid/commsup.c |    4 +++-
 drivers/scsi/aacraid/linit.c   |    1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1530,9 +1530,10 @@ static int _aac_reset_adapter(struct aac
 	host = aac->scsi_host_ptr;
 	scsi_block_requests(host);
 	aac_adapter_disable_int(aac);
-	if (aac->thread->pid != current->pid) {
+	if (aac->thread && aac->thread->pid != current->pid) {
 		spin_unlock_irq(host->host_lock);
 		kthread_stop(aac->thread);
+		aac->thread = NULL;
 		jafo = 1;
 	}
 
@@ -1619,6 +1620,7 @@ static int _aac_reset_adapter(struct aac
 					  aac->name);
 		if (IS_ERR(aac->thread)) {
 			retval = PTR_ERR(aac->thread);
+			aac->thread = NULL;
 			goto out;
 		}
 	}
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1565,6 +1565,7 @@ static void __aac_shutdown(struct aac_de
 				up(&fib->event_wait);
 		}
 		kthread_stop(aac->thread);
+		aac->thread = NULL;
 	}
 
 	aac_send_shutdown(aac);

[PATCH 4.14 116/165] scsi: core: Make SCSI Status CONDITION MET equivalent to GOOD

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Gilbert <dgilbert@interlog.com>

[ Upstream commit 1875ede02ed5e176a18dccbca84abc28d5b3e141 ]

The SCSI PRE-FETCH (10 or 16) command is present both on hard disks
and some SSDs. It is useful when the address of the next block(s) to
be read is known but it is not following the LBA of the current READ
(so read-ahead won't help). It returns two "good" SCSI Status values.
If the requested blocks have fitted (or will most likely fit (when
the IMMED bit is set)) into the disk's cache, it returns CONDITION
MET. If it didn't (or will not) fit then it returns GOOD status.

The goal of this patch is to stop the SCSI subsystem treating the
CONDITION MET SCSI status as an error. The current state makes the
PRE-FETCH command effectively unusable via pass-throughs.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/scsi_lib.c |   11 +++++++++++
 include/scsi/scsi.h     |    2 ++
 2 files changed, 13 insertions(+)

--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -857,6 +857,17 @@ void scsi_io_completion(struct scsi_cmnd
 		/* for passthrough error may be set */
 		error = BLK_STS_OK;
 	}
+	/*
+	 * Another corner case: the SCSI status byte is non-zero but 'good'.
+	 * Example: PRE-FETCH command returns SAM_STAT_CONDITION_MET when
+	 * it is able to fit nominated LBs in its cache (and SAM_STAT_GOOD
+	 * if it can't fit). Treat SAM_STAT_CONDITION_MET and the related
+	 * intermediate statuses (both obsolete in SAM-4) as good.
+	 */
+	if (status_byte(result) && scsi_status_is_good(result)) {
+		result = 0;
+		error = BLK_STS_OK;
+	}
 
 	/*
 	 * special case: failed zero length commands always need to
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -47,6 +47,8 @@ static inline int scsi_status_is_good(in
 	 */
 	status &= 0xfe;
 	return ((status == SAM_STAT_GOOD) ||
+		(status == SAM_STAT_CONDITION_MET) ||
+		/* Next two "intermediate" statuses are obsolete in SAM-4 */
 		(status == SAM_STAT_INTERMEDIATE) ||
 		(status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
 		/* FIXME: this is obsolete in SAM-3 */

[PATCH 4.14 117/165] scsi: mvsas: fix wrong endianness of sgpio api

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wilfried Weissmann <wilfried.weissmann@gmx.at>

[ Upstream commit e75fba9c0668b3767f608ea07485f48d33c270cf ]

This patch fixes the byte order of the SGPIO api and brings it back in
sync with ledmon v0.80 and above.

[mkp: added missing SoB and fixed whitespace]

Signed-off-by: Wilfried Weissmann <wilfried.weissmann@gmx.at>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/mvsas/mv_94xx.c |   23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

--- a/drivers/scsi/mvsas/mv_94xx.c
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -1080,16 +1080,16 @@ static int mvs_94xx_gpio_write(struct mv
 			void __iomem *regs = mvi->regs_ex - 0x10200;
 
 			int drive = (i/3) & (4-1); /* drive number on host */
-			u32 block = mr32(MVS_SGPIO_DCTRL +
+			int driveshift = drive * 8; /* bit offset of drive */
+			u32 block = ioread32be(regs + MVS_SGPIO_DCTRL +
 				MVS_SGPIO_HOST_OFFSET * mvi->id);
 
-
 			/*
 			* if bit is set then create a mask with the first
 			* bit of the drive set in the mask ...
 			*/
-			u32 bit = (write_data[i/8] & (1 << (i&(8-1)))) ?
-				1<<(24-drive*8) : 0;
+			u32 bit = get_unaligned_be32(write_data) & (1 << i) ?
+				1 << driveshift : 0;
 
 			/*
 			* ... and then shift it to the right position based
@@ -1098,26 +1098,27 @@ static int mvs_94xx_gpio_write(struct mv
 			switch (i%3) {
 			case 0: /* activity */
 				block &= ~((0x7 << MVS_SGPIO_DCTRL_ACT_SHIFT)
-					<< (24-drive*8));
+					<< driveshift);
 					/* hardwire activity bit to SOF */
 				block |= LED_BLINKA_SOF << (
 					MVS_SGPIO_DCTRL_ACT_SHIFT +
-					(24-drive*8));
+					driveshift);
 				break;
 			case 1: /* id */
 				block &= ~((0x3 << MVS_SGPIO_DCTRL_LOC_SHIFT)
-					<< (24-drive*8));
+					<< driveshift);
 				block |= bit << MVS_SGPIO_DCTRL_LOC_SHIFT;
 				break;
 			case 2: /* fail */
 				block &= ~((0x7 << MVS_SGPIO_DCTRL_ERR_SHIFT)
-					<< (24-drive*8));
+					<< driveshift);
 				block |= bit << MVS_SGPIO_DCTRL_ERR_SHIFT;
 				break;
 			}
 
-			mw32(MVS_SGPIO_DCTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
-				block);
+			iowrite32be(block,
+				regs + MVS_SGPIO_DCTRL +
+				MVS_SGPIO_HOST_OFFSET * mvi->id);
 
 		}
 
@@ -1132,7 +1133,7 @@ static int mvs_94xx_gpio_write(struct mv
 			void __iomem *regs = mvi->regs_ex - 0x10200;
 
 			mw32(MVS_SGPIO_DCTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
-				be32_to_cpu(((u32 *) write_data)[i]));
+				((u32 *) write_data)[i]);
 		}
 		return reg_count;
 	}

[PATCH 4.14 118/165] scsi: lpfc: Fix issue_lip if link is disabled

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 2289e9598dde9705400559ca2606fb8c145c34f0 ]

The driver ignored checks on whether the link should be kept
administratively down after a link bounce. Correct the checks.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_attr.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -871,7 +871,12 @@ lpfc_issue_lip(struct Scsi_Host *shost)
 	LPFC_MBOXQ_t *pmboxq;
 	int mbxstatus = MBXERR_ERROR;
 
+	/*
+	 * If the link is offline, disabled or BLOCK_MGMT_IO
+	 * it doesn't make any sense to allow issue_lip
+	 */
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
+	    (phba->hba_flag & LINK_DISABLED) ||
 	    (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO))
 		return -EPERM;
 

[PATCH 4.14 119/165] scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 161df4f09987ae2e9f0f97f0b38eee298b4a39ff ]

During link bounce testing in a point-to-point topology, the host may
enter a soft lockup on the lpfc_worker thread:

    Call Trace:
     lpfc_work_done+0x1f3/0x1390 [lpfc]
     lpfc_do_work+0x16f/0x180 [lpfc]
     kthread+0xc7/0xe0
     ret_from_fork+0x3f/0x70

The driver was simultaneously setting a combination of flags that caused
lpfc_do_work()to effectively spin between slow path work and new event
data, causing the lockup.

Ensure in the typical wq completions, that new event data flags are set
if the slow path flag is running. The slow path will eventually
reschedule the wq handling.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_hbadisc.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -698,8 +698,9 @@ lpfc_work_done(struct lpfc_hba *phba)
 		      phba->hba_flag & HBA_SP_QUEUE_EVT)) {
 		if (pring->flag & LPFC_STOP_IOCB_EVENT) {
 			pring->flag |= LPFC_DEFERRED_RING_EVENT;
-			/* Set the lpfc data pending flag */
-			set_bit(LPFC_DATA_READY, &phba->data_flags);
+			/* Preserve legacy behavior. */
+			if (!(phba->hba_flag & HBA_SP_QUEUE_EVT))
+				set_bit(LPFC_DATA_READY, &phba->data_flags);
 		} else {
 			if (phba->link_state >= LPFC_LINK_UP ||
 			    phba->link_flag & LS_MDS_LOOPBACK) {

[PATCH 4.14 120/165] scsi: lpfc: Fix frequency of Release WQE CQEs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 04673e38f56b30cd39b1fa0f386137d818b17781 ]

The driver controls when the hardware sends completions that communicate
consumption of elements from the WQ. This is done by setting a WQEC bit
on a WQE.

The current driver sets it on every Nth WQE posting. However, the driver
isn't clearing the bit if the WQE is reused. Thus, if the queue depth
isn't evenly divisible by N, with enough time, it can be set on every
element, creating a lot of overhead and risking CQ full conditions.

Correct by clearing the bit when not setting it on an Nth element.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_sli.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -129,6 +129,8 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, u
 	/* set consumption flag every once in a while */
 	if (!((q->host_index + 1) % q->entry_repost))
 		bf_set(wqe_wqec, &wqe->generic.wqe_com, 1);
+	else
+		bf_set(wqe_wqec, &wqe->generic.wqe_com, 0);
 	if (q->phba->sli3_options & LPFC_SLI4_PHWQ_ENABLED)
 		bf_set(wqe_wqid, &wqe->generic.wqe_com, q->queue_id);
 	lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);

[PATCH 4.14 121/165] ASoC: hdmi-codec: Fix module unloading caused kernel crash

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 5e558f8afaec8957932b1dbe5aeff800f9fc6957 ]

The hcp->chmap_info must not be freed up in the hdmi_codec_remove()
function as it leads to kernel crash due ALSA core's
pcm_chmap_ctl_private_free() is trying to free it up again when the card
destroyed via snd_card_free.

Commit cd6111b26280a ("ASoC: hdmi-codec: add channel mapping control")
should not have added the kfree(hcp->chmap_info); to the hdmi_codec_remove
function.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/hdmi-codec.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -801,12 +801,7 @@ static int hdmi_codec_probe(struct platf
 
 static int hdmi_codec_remove(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
-	struct hdmi_codec_priv *hcp;
-
-	hcp = dev_get_drvdata(dev);
-	kfree(hcp->chmap_info);
-	snd_soc_unregister_codec(dev);
+	snd_soc_unregister_codec(&pdev->dev);
 
 	return 0;
 }

[PATCH 4.14 122/165] ASoC: rockchip: rk3288-hdmi-analog: Select needed codecs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ezequiel Garcia <ezequiel@collabora.co.uk>

[ Upstream commit b1d0db067fbe2598d62b248beea5d705a0ea7642 ]

The driver does not select all the codec drivers that needs.
Fix it by selecting the analog and HDMI codecs.

Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/rockchip/Kconfig |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/soc/rockchip/Kconfig
+++ b/sound/soc/rockchip/Kconfig
@@ -56,6 +56,9 @@ config SND_SOC_RK3288_HDMI_ANALOG
 	depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP
 	select SND_SOC_ROCKCHIP_I2S
 	select SND_SOC_HDMI_CODEC
+	select SND_SOC_ES8328_I2C
+	select SND_SOC_ES8328_SPI if SPI_MASTER
+	select DRM_DW_HDMI_I2S_AUDIO if DRM_DW_HDMI
 	help
 	  Say Y or M here if you want to add support for SoC audio on Rockchip
 	  RK3288 boards using an analog output and the built-in HDMI audio.

[PATCH 4.14 123/165] ASoC: samsung: odroid: Fix 32000 sample rate handling

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sylwester Nawrocki <s.nawrocki@samsung.com>

[ Upstream commit 1d22c337dc8f3a25638f7262e7bcb5729a34d140 ]

In case of sample rates lower than 44100 currently there is too low MCLK
frequency set for the CODEC. Playback fails with following errors:

$ speaker-test -c2 -t sine -f 1500 -l2 -r 32000

Sine wave rate is 1500.0000Hz
Rate set to 32000Hz (requested 32000Hz)
Buffer size range from 128 to 131072
Period size range from 64 to 65536
Using max buffer size 131072
Periods = 4
Unable to set hw params for playback: Invalid argument
Setting of hwparams failed: Invalid argument

[  497.883700] max98090 1-0010: Invalid master clock frequency

To fix this the I2S root clock's frequency is increased, depending
on sampling rate.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/samsung/odroid.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/sound/soc/samsung/odroid.c
+++ b/sound/soc/samsung/odroid.c
@@ -36,23 +36,26 @@ static int odroid_card_hw_params(struct
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct odroid_priv *priv = snd_soc_card_get_drvdata(rtd->card);
-	unsigned int pll_freq, rclk_freq;
+	unsigned int pll_freq, rclk_freq, rfs;
 	int ret;
 
 	switch (params_rate(params)) {
-	case 32000:
 	case 64000:
-		pll_freq = 131072006U;
+		pll_freq = 196608001U;
+		rfs = 384;
 		break;
 	case 44100:
 	case 88200:
 	case 176400:
 		pll_freq = 180633609U;
+		rfs = 512;
 		break;
+	case 32000:
 	case 48000:
 	case 96000:
 	case 192000:
 		pll_freq = 196608001U;
+		rfs = 512;
 		break;
 	default:
 		return -EINVAL;
@@ -67,7 +70,7 @@ static int odroid_card_hw_params(struct
 	 *  frequency values due to the EPLL output frequency not being exact
 	 *  multiple of the audio sampling rate.
 	 */
-	rclk_freq = params_rate(params) * 256 + 1;
+	rclk_freq = params_rate(params) * rfs + 1;
 
 	ret = clk_set_rate(priv->sclk_i2s, rclk_freq);
 	if (ret < 0)

[PATCH 4.14 124/165] ASoC: topology: create TLV data for dapm widgets

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>

[ Upstream commit bde8b3887add8368ecf0ca71117baf2fd56a6fc9 ]

This patch adds the change required to create the TLV data
for dapm widget kcontrols from topology. This also fixes the following
TLV read error shown in amixer while showing the card control contents.
"amixer: Control hw:1 element TLV read error: No such device or address"

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-topology.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1276,6 +1276,9 @@ static struct snd_kcontrol_new *soc_tplg
 			kfree(sm);
 			continue;
 		}
+
+		/* create any TLV data */
+		soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
 	}
 	return kc;
 

[PATCH 4.14 125/165] ASoC: samsung: i2s: Ensure the RCLK rate is properly determined

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sylwester Nawrocki <s.nawrocki@samsung.com>

[ Upstream commit 647d04f8e07afc7c3b7a42b3ee01a8b28db29631 ]

If the RCLK mux clock configuration is specified in DT and no set_sysclk()
callback is used in the sound card driver the sclk_srcrate field will remain
set to 0, leading to an incorrect PSR divider setting.
To fix this the frequency value is retrieved from the CLK_I2S_RCLK_SRC clock,
so the actual RCLK mux selection is taken into account.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/samsung/i2s.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -653,8 +653,12 @@ static int i2s_set_fmt(struct snd_soc_da
 		tmp |= mod_slave;
 		break;
 	case SND_SOC_DAIFMT_CBS_CFS:
-		/* Set default source clock in Master mode */
-		if (i2s->rclk_srcrate == 0)
+		/*
+		 * Set default source clock in Master mode, only when the
+		 * CLK_I2S_RCLK_SRC clock is not exposed so we ensure any
+		 * clock configuration assigned in DT is not overwritten.
+		 */
+		if (i2s->rclk_srcrate == 0 && i2s->clk_data.clks == NULL)
 			i2s_set_sysclk(dai, SAMSUNG_I2S_RCLKSRC_0,
 							0, SND_SOC_CLOCK_IN);
 		break;
@@ -878,6 +882,11 @@ static int config_setup(struct i2s_dai *
 		return 0;
 
 	if (!(i2s->quirks & QUIRK_NO_MUXPSR)) {
+		struct clk *rclksrc = i2s->clk_table[CLK_I2S_RCLK_SRC];
+
+		if (i2s->rclk_srcrate == 0 && rclksrc && !IS_ERR(rclksrc))
+			i2s->rclk_srcrate = clk_get_rate(rclksrc);
+
 		psr = i2s->rclk_srcrate / i2s->frmclk / rfs;
 		writel(((psr - 1) << 8) | PSR_PSREN, i2s->addr + I2SPSR);
 		dev_dbg(&i2s->pdev->dev,

[PATCH 4.14 126/165] clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Lin <shawn.lin@rock-chips.com>

[ Upstream commit 4b0556a441dd37e598887215bc89b49a6ef525b3 ]

commit c420c1e4db22 ("clk: rockchip: Prevent calculating mmc phase
if clock rate is zero") catches one gremlin again for clk-rk3228.c
that the parent of SDMMC phase clock should be sclk_sdmmc0, but not
sclk_sdmmc. However, the naming of the sdmmc clocks varies in the
manual with the card clock having the 0 while the hclk is named
without appended 0. So standardize one one format to prevent
confusion, as there also is only one (non-sdio) mmc controller on
the soc.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/rockchip/clk-rk3228.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -387,7 +387,7 @@ static struct rockchip_clk_branch rk3228
 			RK2928_CLKSEL_CON(23), 5, 2, MFLAGS, 0, 6, DFLAGS,
 			RK2928_CLKGATE_CON(2), 15, GFLAGS),
 
-	COMPOSITE(SCLK_SDMMC, "sclk_sdmmc0", mux_mmc_src_p, 0,
+	COMPOSITE(SCLK_SDMMC, "sclk_sdmmc", mux_mmc_src_p, 0,
 			RK2928_CLKSEL_CON(11), 8, 2, MFLAGS, 0, 8, DFLAGS,
 			RK2928_CLKGATE_CON(2), 11, GFLAGS),
 

[PATCH 4.14 127/165] clk: Dont show the incorrect clock phase

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Lin <shawn.lin@rock-chips.com>

[ Upstream commit 1f9c63e8de3d7b377c9d74e4a17524cfb60e6384 ]

It's found that the clock phase output from clk_summary is
wrong compared to the actual phase reading from the register.

cat /sys/kernel/debug/clk/clk_summary | grep sdio_sample
sdio_sample     0        1        0 50000000          0 -22

It exposes an issue that clk core, clk_core_get_phase, always
returns the cached core->phase which should be either updated
by calling clk_set_phase or directly from the first place the
clk was registered.

When registering the clk, the core->phase geting from ->get_phase()
may return negative value indicating error. This is quite common
since the clk's phase may be highly related to its parent chain,
but it was temporarily orphan when registered, since its parent
chains hadn't be ready at that time, so the clk drivers decide to
return error in this case. However, if no clk_set_phase is called or
maybe the ->set_phase() isn't even implemented, the core->phase would
never be updated. This is wrong, and we should try to update it when
all its parent chains are settled down, like the way of updating clock
rate for that. But it's not deserved to complicate the code now and
just update it anyway when calling clk_core_get_phase, which would be
much simple and enough.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/clk.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1931,6 +1931,9 @@ static int clk_core_get_phase(struct clk
 	int ret;
 
 	clk_prepare_lock();
+	/* Always try to update cached phase if possible */
+	if (core->ops->get_phase)
+		core->phase = core->ops->get_phase(core->hw);
 	ret = core->phase;
 	clk_prepare_unlock();
 

[PATCH 4.14 128/165] clk: hisilicon: mark wdt_mux_p[] as const

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit df934cbcbff7afbc024bf05f02615917c61f6470 ]

The symbol is in the __initconst section but not marked init, which
caused a warning when building with LTO.

This makes it 'const' as was obviously intended.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: c80dfd9bf54e ("clk: hisilicon: add CRG driver for Hi3516CV300 SoC")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/hisilicon/crg-hi3516cv300.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/hisilicon/crg-hi3516cv300.c
+++ b/drivers/clk/hisilicon/crg-hi3516cv300.c
@@ -204,7 +204,7 @@ static const struct hisi_crg_funcs hi351
 /* hi3516CV300 sysctrl CRG */
 #define HI3516CV300_SYSCTRL_NR_CLKS 16
 
-static const char *wdt_mux_p[] __initconst = { "3m", "apb" };
+static const char *const wdt_mux_p[] __initconst = { "3m", "apb" };
 static u32 wdt_mux_table[] = {0, 1};
 
 static const struct hisi_mux_clock hi3516cv300_sysctrl_mux_clks[] = {

[PATCH 4.14 129/165] clk: tegra: Fix pll_u rate configuration

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcel Ziswiler <marcel@ziswiler.com>

[ Upstream commit c35b518f9ba06c9de79fb3ff62eed7462d804995 ]

Turns out latest upstream U-Boot does not configure/enable pll_u which
leaves it at some default rate of 500 kHz:

root@apalis-t30:~# cat /sys/kernel/debug/clk/clk_summary | grep pll_u
       pll_u                  3        3        0      500000          0

Of course this won't quite work leading to the following messages:

[    6.559593] usb 2-1: new full-speed USB device number 2 using tegra-
ehci
[   11.759173] usb 2-1: device descriptor read/64, error -110
[   27.119453] usb 2-1: device descriptor read/64, error -110
[   27.389217] usb 2-1: new full-speed USB device number 3 using tegra-
ehci
[   32.559454] usb 2-1: device descriptor read/64, error -110
[   47.929777] usb 2-1: device descriptor read/64, error -110
[   48.049658] usb usb2-port1: attempt power cycle
[   48.759475] usb 2-1: new full-speed USB device number 4 using tegra-
ehci
[   59.349457] usb 2-1: device not accepting address 4, error -110
[   59.509449] usb 2-1: new full-speed USB device number 5 using tegra-
ehci
[   70.069457] usb 2-1: device not accepting address 5, error -110
[   70.079721] usb usb2-port1: unable to enumerate USB device

Fix this by actually allowing the rate also being set from within
the Linux kernel.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/tegra/clk-pll.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -1151,6 +1151,8 @@ static const struct clk_ops tegra_clk_pl
 	.enable = clk_pllu_enable,
 	.disable = clk_pll_disable,
 	.recalc_rate = clk_pll_recalc_rate,
+	.round_rate = clk_pll_round_rate,
+	.set_rate = clk_pll_set_rate,
 };
 
 static int _pll_fixed_mdiv(struct tegra_clk_pll_params *pll_params,

[PATCH 4.14 130/165] clk: rockchip: Prevent calculating mmc phase if clock rate is zero

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Lin <shawn.lin@rock-chips.com>

[ Upstream commit 4bf59902b50012b1dddeeaa23b217d9c4956cdda ]

The MMC sample and drv clock for rockchip platforms are derived from
the bus clock output to the MMC/SDIO card. So it should never happens
that the clk rate is zero given it should inherits the clock rate from
its parent. If something goes wrong and makes the clock rate to be zero,
the calculation would be wrong but may still make the mmc tuning process
work luckily. However it makes people harder to debug when the following
data transfer is unstable.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/rockchip/clk-mmc-phase.c |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

--- a/drivers/clk/rockchip/clk-mmc-phase.c
+++ b/drivers/clk/rockchip/clk-mmc-phase.c
@@ -58,6 +58,12 @@ static int rockchip_mmc_get_phase(struct
 	u16 degrees;
 	u32 delay_num = 0;
 
+	/* See the comment for rockchip_mmc_set_phase below */
+	if (!rate) {
+		pr_err("%s: invalid clk rate\n", __func__);
+		return -EINVAL;
+	}
+
 	raw_value = readl(mmc_clock->reg) >> (mmc_clock->shift);
 
 	degrees = (raw_value & ROCKCHIP_MMC_DEGREE_MASK) * 90;
@@ -84,6 +90,23 @@ static int rockchip_mmc_set_phase(struct
 	u32 raw_value;
 	u32 delay;
 
+	/*
+	 * The below calculation is based on the output clock from
+	 * MMC host to the card, which expects the phase clock inherits
+	 * the clock rate from its parent, namely the output clock
+	 * provider of MMC host. However, things may go wrong if
+	 * (1) It is orphan.
+	 * (2) It is assigned to the wrong parent.
+	 *
+	 * This check help debug the case (1), which seems to be the
+	 * most likely problem we often face and which makes it difficult
+	 * for people to debug unstable mmc tuning results.
+	 */
+	if (!rate) {
+		pr_err("%s: invalid clk rate\n", __func__);
+		return -EINVAL;
+	}
+
 	nineties = degrees / 90;
 	remainder = (degrees % 90);
 

[PATCH 4.14 131/165] clk: samsung: s3c2410: Fix PLL rates

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit 179db533c08431f509a3823077549773d519358b ]

Rates declared in PLL rate tables should match exactly rates calculated from
the PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.

To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/samsung/clk-s3c2410.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/clk/samsung/clk-s3c2410.c
+++ b/drivers/clk/samsung/clk-s3c2410.c
@@ -168,7 +168,7 @@ static struct samsung_pll_rate_table pll
 	PLL_35XX_RATE(226000000, 105, 1, 1),
 	PLL_35XX_RATE(210000000, 132, 2, 1),
 	/* 2410 common */
-	PLL_35XX_RATE(203000000, 161, 3, 1),
+	PLL_35XX_RATE(202800000, 161, 3, 1),
 	PLL_35XX_RATE(192000000, 88, 1, 1),
 	PLL_35XX_RATE(186000000, 85, 1, 1),
 	PLL_35XX_RATE(180000000, 82, 1, 1),
@@ -178,18 +178,18 @@ static struct samsung_pll_rate_table pll
 	PLL_35XX_RATE(147000000, 90, 2, 1),
 	PLL_35XX_RATE(135000000, 82, 2, 1),
 	PLL_35XX_RATE(124000000, 116, 1, 2),
-	PLL_35XX_RATE(118000000, 150, 2, 2),
+	PLL_35XX_RATE(118500000, 150, 2, 2),
 	PLL_35XX_RATE(113000000, 105, 1, 2),
-	PLL_35XX_RATE(101000000, 127, 2, 2),
+	PLL_35XX_RATE(101250000, 127, 2, 2),
 	PLL_35XX_RATE(90000000, 112, 2, 2),
-	PLL_35XX_RATE(85000000, 105, 2, 2),
+	PLL_35XX_RATE(84750000, 105, 2, 2),
 	PLL_35XX_RATE(79000000, 71, 1, 2),
-	PLL_35XX_RATE(68000000, 82, 2, 2),
-	PLL_35XX_RATE(56000000, 142, 2, 3),
+	PLL_35XX_RATE(67500000, 82, 2, 2),
+	PLL_35XX_RATE(56250000, 142, 2, 3),
 	PLL_35XX_RATE(48000000, 120, 2, 3),
-	PLL_35XX_RATE(51000000, 161, 3, 3),
+	PLL_35XX_RATE(50700000, 161, 3, 3),
 	PLL_35XX_RATE(45000000, 82, 1, 3),
-	PLL_35XX_RATE(34000000, 82, 2, 3),
+	PLL_35XX_RATE(33750000, 82, 2, 3),
 	{ /* sentinel */ },
 };
 

[PATCH 4.14 132/165] clk: samsung: exynos7: Fix PLL rates

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit 7e4db0c2836e892766565965207eee051c8037b9 ]

Rates declared in PLL rate tables should match exactly rates calculated from
the PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.

To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/samsung/clk-exynos7.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -140,7 +140,7 @@ static const struct samsung_div_clock to
 };
 
 static const struct samsung_pll_rate_table pll1460x_24mhz_tbl[] __initconst = {
-	PLL_36XX_RATE(491520000, 20, 1, 0, 31457),
+	PLL_36XX_RATE(491519897, 20, 1, 0, 31457),
 	{},
 };
 

[PATCH 4.14 133/165] clk: samsung: exynos5260: Fix PLL rates

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit cdb68fbd4e7962be742c4f29475220c5bf28d8a5 ]

Rates declared in PLL rate tables should match exactly rates calculated from
the PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.

To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/samsung/clk-exynos5260.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/samsung/clk-exynos5260.c
+++ b/drivers/clk/samsung/clk-exynos5260.c
@@ -65,7 +65,7 @@ static const struct samsung_pll_rate_tab
 	PLL_36XX_RATE(480000000, 160, 2, 2, 0),
 	PLL_36XX_RATE(432000000, 144, 2, 2, 0),
 	PLL_36XX_RATE(400000000, 200, 3, 2, 0),
-	PLL_36XX_RATE(394073130, 459, 7, 2, 49282),
+	PLL_36XX_RATE(394073128, 459, 7, 2, 49282),
 	PLL_36XX_RATE(333000000, 111, 2, 2, 0),
 	PLL_36XX_RATE(300000000, 100, 2, 2, 0),
 	PLL_36XX_RATE(266000000, 266, 3, 3, 0),

[PATCH 4.14 134/165] clk: samsung: exynos5433: Fix PLL rates

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit ab0447845cffc0fd752df2ccd6b4e34006000ce4 ]

Rates declared in PLL rate tables should match exactly rates calculated from
the PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.

To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/samsung/clk-exynos5433.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -725,7 +725,7 @@ static const struct samsung_pll_rate_tab
 	PLL_35XX_RATE(800000000U,  400, 6,  1),
 	PLL_35XX_RATE(733000000U,  733, 12, 1),
 	PLL_35XX_RATE(700000000U,  175, 3,  1),
-	PLL_35XX_RATE(667000000U,  222, 4,  1),
+	PLL_35XX_RATE(666000000U,  222, 4,  1),
 	PLL_35XX_RATE(633000000U,  211, 4,  1),
 	PLL_35XX_RATE(600000000U,  500, 5,  2),
 	PLL_35XX_RATE(552000000U,  460, 5,  2),
@@ -753,12 +753,12 @@ static const struct samsung_pll_rate_tab
 /* AUD_PLL */
 static const struct samsung_pll_rate_table exynos5433_aud_pll_rates[] __initconst = {
 	PLL_36XX_RATE(400000000U, 200, 3, 2,      0),
-	PLL_36XX_RATE(393216000U, 197, 3, 2, -25690),
+	PLL_36XX_RATE(393216003U, 197, 3, 2, -25690),
 	PLL_36XX_RATE(384000000U, 128, 2, 2,      0),
-	PLL_36XX_RATE(368640000U, 246, 4, 2, -15729),
-	PLL_36XX_RATE(361507200U, 181, 3, 2, -16148),
-	PLL_36XX_RATE(338688000U, 113, 2, 2,  -6816),
-	PLL_36XX_RATE(294912000U,  98, 1, 3,  19923),
+	PLL_36XX_RATE(368639991U, 246, 4, 2, -15729),
+	PLL_36XX_RATE(361507202U, 181, 3, 2, -16148),
+	PLL_36XX_RATE(338687988U, 113, 2, 2,  -6816),
+	PLL_36XX_RATE(294912002U,  98, 1, 3,  19923),
 	PLL_36XX_RATE(288000000U,  96, 1, 3,      0),
 	PLL_36XX_RATE(252000000U,  84, 1, 3,      0),
 	{ /* sentinel */ }

[PATCH 4.14 135/165] clk: samsung: exynos5250: Fix PLL rates

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit 2ac051eeabaa411ef89ae7cd5bb8e60cb41ad780 ]

Rates declared in PLL rate tables should match exactly rates calculated
from PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.

To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/samsung/clk-exynos5250.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -711,13 +711,13 @@ static const struct samsung_pll_rate_tab
 	/* sorted in descending order */
 	/* PLL_36XX_RATE(rate, m, p, s, k) */
 	PLL_36XX_RATE(192000000, 64, 2, 2, 0),
-	PLL_36XX_RATE(180633600, 90, 3, 2, 20762),
+	PLL_36XX_RATE(180633605, 90, 3, 2, 20762),
 	PLL_36XX_RATE(180000000, 90, 3, 2, 0),
 	PLL_36XX_RATE(73728000, 98, 2, 4, 19923),
-	PLL_36XX_RATE(67737600, 90, 2, 4, 20762),
+	PLL_36XX_RATE(67737602, 90, 2, 4, 20762),
 	PLL_36XX_RATE(49152000, 98, 3, 4, 19923),
-	PLL_36XX_RATE(45158400, 90, 3, 4, 20762),
-	PLL_36XX_RATE(32768000, 131, 3, 5, 4719),
+	PLL_36XX_RATE(45158401, 90, 3, 4, 20762),
+	PLL_36XX_RATE(32768001, 131, 3, 5, 4719),
 	{ },
 };
 

[PATCH 4.14 136/165] clk: samsung: exynos3250: Fix PLL rates

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit a8321e7887410a2b2e80ab89d1ef7b30562658ea ]

Rates declared in PLL rate tables should match exactly rates calculated
from PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.

To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.

In this patch an erroneous P value for 74176002 output frequency is also
corrected.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/samsung/clk-exynos3250.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/clk/samsung/clk-exynos3250.c
+++ b/drivers/clk/samsung/clk-exynos3250.c
@@ -698,7 +698,7 @@ static const struct samsung_pll_rate_tab
 	PLL_36XX_RATE(144000000,  96, 2, 3,     0),
 	PLL_36XX_RATE( 96000000, 128, 2, 4,     0),
 	PLL_36XX_RATE( 84000000, 112, 2, 4,     0),
-	PLL_36XX_RATE( 80000004, 106, 2, 4, 43691),
+	PLL_36XX_RATE( 80000003, 106, 2, 4, 43691),
 	PLL_36XX_RATE( 73728000,  98, 2, 4, 19923),
 	PLL_36XX_RATE( 67737598, 270, 3, 5, 62285),
 	PLL_36XX_RATE( 65535999, 174, 2, 5, 49982),
@@ -734,7 +734,7 @@ static const struct samsung_pll_rate_tab
 	PLL_36XX_RATE(148352005,  98, 2, 3, 59070),
 	PLL_36XX_RATE(108000000, 144, 2, 4,     0),
 	PLL_36XX_RATE( 74250000,  99, 2, 4,     0),
-	PLL_36XX_RATE( 74176002,  98, 3, 4, 59070),
+	PLL_36XX_RATE( 74176002,  98, 2, 4, 59070),
 	PLL_36XX_RATE( 54054000, 216, 3, 5, 14156),
 	PLL_36XX_RATE( 54000000, 144, 2, 5,     0),
 	{ /* sentinel */ }

[PATCH 4.14 137/165] media: dmxdev: fix error code for invalid ioctls

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[ Upstream commit a145f64c6107d3aa5a7cec9f8977d04ac2a896c9 ]

Returning -EINVAL when an ioctl is not implemented is a very
bad idea, as it is hard to distinguish from other error
contitions that an ioctl could lead. Replace it by its
right error code: -ENOTTY.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/dvb-core/dmxdev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/dvb-core/dmxdev.c
+++ b/drivers/media/dvb-core/dmxdev.c
@@ -1055,7 +1055,7 @@ static int dvb_demux_do_ioctl(struct fil
 		break;
 
 	default:
-		ret = -EINVAL;
+		ret = -ENOTTY;
 		break;
 	}
 	mutex_unlock(&dmxdev->mutex);

[PATCH 4.14 138/165] media: Dont let tvp5150_get_vbi() go out of vbi_ram_default array

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[ Upstream commit 3dd6b560dc5d59e7cb6dbda6e85dc9af7925fcf8 ]

As pointed by Dan, possible values for bits[3:0] of te Line Mode Registers
can range from 0x0 to 0xf, but the check logic allow values ranging
from 0x0 to 0xe.

As static arrays are initialized with zero, using a value without
an explicit initializer at the array won't cause any harm.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/i2c/tvp5150.c |   88 ++++++++++++++++++++++----------------------
 1 file changed, 45 insertions(+), 43 deletions(-)

--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -506,80 +506,77 @@ static struct i2c_vbi_ram_value vbi_ram_
 	/* FIXME: Current api doesn't handle all VBI types, those not
 	   yet supported are placed under #if 0 */
 #if 0
-	{0x010, /* Teletext, SECAM, WST System A */
+	[0] = {0x010, /* Teletext, SECAM, WST System A */
 		{V4L2_SLICED_TELETEXT_SECAM,6,23,1},
 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
 		  0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
 	},
 #endif
-	{0x030, /* Teletext, PAL, WST System B */
+	[1] = {0x030, /* Teletext, PAL, WST System B */
 		{V4L2_SLICED_TELETEXT_B,6,22,1},
 		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
 		  0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
 	},
 #if 0
-	{0x050, /* Teletext, PAL, WST System C */
+	[2] = {0x050, /* Teletext, PAL, WST System C */
 		{V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
 		  0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
 	},
-	{0x070, /* Teletext, NTSC, WST System B */
+	[3] = {0x070, /* Teletext, NTSC, WST System B */
 		{V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
 		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
 	},
-	{0x090, /* Tetetext, NTSC NABTS System C */
+	[4] = {0x090, /* Tetetext, NTSC NABTS System C */
 		{V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
 	},
-	{0x0b0, /* Teletext, NTSC-J, NABTS System D */
+	[5] = {0x0b0, /* Teletext, NTSC-J, NABTS System D */
 		{V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
 		{ 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
 	},
-	{0x0d0, /* Closed Caption, PAL/SECAM */
+	[6] = {0x0d0, /* Closed Caption, PAL/SECAM */
 		{V4L2_SLICED_CAPTION_625,22,22,1},
 		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
 		  0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
 	},
 #endif
-	{0x0f0, /* Closed Caption, NTSC */
+	[7] = {0x0f0, /* Closed Caption, NTSC */
 		{V4L2_SLICED_CAPTION_525,21,21,1},
 		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
 		  0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
 	},
-	{0x110, /* Wide Screen Signal, PAL/SECAM */
+	[8] = {0x110, /* Wide Screen Signal, PAL/SECAM */
 		{V4L2_SLICED_WSS_625,23,23,1},
 		{ 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
 		  0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
 	},
 #if 0
-	{0x130, /* Wide Screen Signal, NTSC C */
+	[9] = {0x130, /* Wide Screen Signal, NTSC C */
 		{V4L2_SLICED_WSS_525,20,20,1},
 		{ 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
 		  0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
 	},
-	{0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
+	[10] = {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
 		{V4l2_SLICED_VITC_625,6,22,0},
 		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
 		  0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
 	},
-	{0x170, /* Vertical Interval Timecode (VITC), NTSC */
+	[11] = {0x170, /* Vertical Interval Timecode (VITC), NTSC */
 		{V4l2_SLICED_VITC_525,10,20,0},
 		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
 		  0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
 	},
 #endif
-	{0x190, /* Video Program System (VPS), PAL */
+	[12] = {0x190, /* Video Program System (VPS), PAL */
 		{V4L2_SLICED_VPS,16,16,0},
 		{ 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
 		  0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
 	},
 	/* 0x1d0 User programmable */
-
-	/* End of struct */
-	{ (u16)-1 }
 };
 
 static int tvp5150_write_inittab(struct v4l2_subdev *sd,
@@ -592,10 +589,10 @@ static int tvp5150_write_inittab(struct
 	return 0;
 }
 
-static int tvp5150_vdp_init(struct v4l2_subdev *sd,
-				const struct i2c_vbi_ram_value *regs)
+static int tvp5150_vdp_init(struct v4l2_subdev *sd)
 {
 	unsigned int i;
+	int j;
 
 	/* Disable Full Field */
 	tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
@@ -605,14 +602,17 @@ static int tvp5150_vdp_init(struct v4l2_
 		tvp5150_write(sd, i, 0xff);
 
 	/* Load Ram Table */
-	while (regs->reg != (u16)-1) {
+	for (j = 0; j < ARRAY_SIZE(vbi_ram_default); j++) {
+		const struct i2c_vbi_ram_value *regs = &vbi_ram_default[j];
+
+		if (!regs->type.vbi_type)
+			continue;
+
 		tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
 		tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
 
 		for (i = 0; i < 16; i++)
 			tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
-
-		regs++;
 	}
 	return 0;
 }
@@ -621,19 +621,23 @@ static int tvp5150_vdp_init(struct v4l2_
 static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
 				struct v4l2_sliced_vbi_cap *cap)
 {
-	const struct i2c_vbi_ram_value *regs = vbi_ram_default;
-	int line;
+	int line, i;
 
 	dev_dbg_lvl(sd->dev, 1, debug, "g_sliced_vbi_cap\n");
 	memset(cap, 0, sizeof *cap);
 
-	while (regs->reg != (u16)-1 ) {
-		for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
+	for (i = 0; i < ARRAY_SIZE(vbi_ram_default); i++) {
+		const struct i2c_vbi_ram_value *regs = &vbi_ram_default[i];
+
+		if (!regs->type.vbi_type)
+			continue;
+
+		for (line = regs->type.ini_line;
+		     line <= regs->type.end_line;
+		     line++) {
 			cap->service_lines[0][line] |= regs->type.vbi_type;
 		}
 		cap->service_set |= regs->type.vbi_type;
-
-		regs++;
 	}
 	return 0;
 }
@@ -652,14 +656,13 @@ static int tvp5150_g_sliced_vbi_cap(stru
  *	MSB = field2
  */
 static int tvp5150_set_vbi(struct v4l2_subdev *sd,
-			const struct i2c_vbi_ram_value *regs,
 			unsigned int type,u8 flags, int line,
 			const int fields)
 {
 	struct tvp5150 *decoder = to_tvp5150(sd);
 	v4l2_std_id std = decoder->norm;
 	u8 reg;
-	int pos = 0;
+	int i, pos = 0;
 
 	if (std == V4L2_STD_ALL) {
 		dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");
@@ -672,19 +675,19 @@ static int tvp5150_set_vbi(struct v4l2_s
 	if (line < 6 || line > 27)
 		return 0;
 
-	while (regs->reg != (u16)-1) {
+	for (i = 0; i < ARRAY_SIZE(vbi_ram_default); i++) {
+		const struct i2c_vbi_ram_value *regs =  &vbi_ram_default[i];
+
+		if (!regs->type.vbi_type)
+			continue;
+
 		if ((type & regs->type.vbi_type) &&
 		    (line >= regs->type.ini_line) &&
 		    (line <= regs->type.end_line))
 			break;
-
-		regs++;
 		pos++;
 	}
 
-	if (regs->reg == (u16)-1)
-		return 0;
-
 	type = pos | (flags & 0xf0);
 	reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
 
@@ -697,8 +700,7 @@ static int tvp5150_set_vbi(struct v4l2_s
 	return type;
 }
 
-static int tvp5150_get_vbi(struct v4l2_subdev *sd,
-			const struct i2c_vbi_ram_value *regs, int line)
+static int tvp5150_get_vbi(struct v4l2_subdev *sd, int line)
 {
 	struct tvp5150 *decoder = to_tvp5150(sd);
 	v4l2_std_id std = decoder->norm;
@@ -727,8 +729,8 @@ static int tvp5150_get_vbi(struct v4l2_s
 			return 0;
 		}
 		pos = ret & 0x0f;
-		if (pos < 0x0f)
-			type |= regs[pos].type.vbi_type;
+		if (pos < ARRAY_SIZE(vbi_ram_default))
+			type |= vbi_ram_default[pos].type.vbi_type;
 	}
 
 	return type;
@@ -789,7 +791,7 @@ static int tvp5150_reset(struct v4l2_sub
 	tvp5150_write_inittab(sd, tvp5150_init_default);
 
 	/* Initializes VDP registers */
-	tvp5150_vdp_init(sd, vbi_ram_default);
+	tvp5150_vdp_init(sd);
 
 	/* Selects decoder input */
 	tvp5150_selmux(sd);
@@ -1122,8 +1124,8 @@ static int tvp5150_s_sliced_fmt(struct v
 		for (i = 0; i <= 23; i++) {
 			svbi->service_lines[1][i] = 0;
 			svbi->service_lines[0][i] =
-				tvp5150_set_vbi(sd, vbi_ram_default,
-				       svbi->service_lines[0][i], 0xf0, i, 3);
+				tvp5150_set_vbi(sd, svbi->service_lines[0][i],
+						0xf0, i, 3);
 		}
 		/* Enables FIFO */
 		tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
@@ -1149,7 +1151,7 @@ static int tvp5150_g_sliced_fmt(struct v
 
 	for (i = 0; i <= 23; i++) {
 		svbi->service_lines[0][i] =
-			tvp5150_get_vbi(sd, vbi_ram_default, i);
+			tvp5150_get_vbi(sd, i);
 		mask |= svbi->service_lines[0][i];
 	}
 	svbi->service_set = mask;

[PATCH 4.14 139/165] media: ov5645: add missing of_node_put() in error path

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Akinobu Mita <akinobu.mita@gmail.com>

[ Upstream commit 06fe932307d58108a11c3e603517dd2a73a57b80 ]

The device node obtained with of_graph_get_next_endpoint() should be
released by calling of_node_put().  But it was not released when
v4l2_fwnode_endpoint_parse() failed.

This change moves the of_node_put() call before the error check and
fixes the issue.

Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/i2c/ov5645.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -1131,13 +1131,14 @@ static int ov5645_probe(struct i2c_clien
 
 	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint),
 					 &ov5645->ep);
+
+	of_node_put(endpoint);
+
 	if (ret < 0) {
 		dev_err(dev, "parsing endpoint node failed\n");
 		return ret;
 	}
 
-	of_node_put(endpoint);
-
 	if (ov5645->ep.bus_type != V4L2_MBUS_CSI2) {
 		dev_err(dev, "invalid bus type, must be CSI2\n");
 		return -EINVAL;

[PATCH 4.14 140/165] media: cx23885: Override 888 ImpactVCBe crystal frequency

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit 779c79d4b833ec646b0aed878da38edb45bbe156 ]

Hauppauge produced a revision of ImpactVCBe using an 888,
with a 25MHz crystal, instead of using the default third
overtone 50Mhz crystal. This overrides that frequency so
that the cx25840 is properly configured. Without the proper
crystal setup the cx25840 cannot load the firmware or
decode video.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/pci/cx23885/cx23885-core.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -873,6 +873,16 @@ static int cx23885_dev_setup(struct cx23
 	if (cx23885_boards[dev->board].clk_freq > 0)
 		dev->clk_freq = cx23885_boards[dev->board].clk_freq;
 
+	if (dev->board == CX23885_BOARD_HAUPPAUGE_IMPACTVCBE &&
+		dev->pci->subsystem_device == 0x7137) {
+		/* Hauppauge ImpactVCBe device ID 0x7137 is populated
+		 * with an 888, and a 25Mhz crystal, instead of the
+		 * usual third overtone 50Mhz. The default clock rate must
+		 * be overridden so the cx25840 is properly configured
+		 */
+		dev->clk_freq = 25000000;
+	}
+
 	dev->pci_bus  = dev->pci->bus->number;
 	dev->pci_slot = PCI_SLOT(dev->pci->devfn);
 	cx23885_irq_add(dev, 0x001f00);

[PATCH 4.14 141/165] media: cx23885: Set subdev host data to clk_freq pointer

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit 5ceade1d97fc6687e050c44c257382c192f56276 ]

Currently clk_freq is ignored entirely, because the cx235840 driver
configures the xtal at the chip defaults. This is an issue if a
board is produced with a non-default frequency crystal. If clk_freq
is not zero the cx25840 will attempt to use the setting provided,
or fall back to defaults otherwise.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/pci/cx23885/cx23885-cards.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -2286,6 +2286,10 @@ void cx23885_card_setup(struct cx23885_d
 				&dev->i2c_bus[2].i2c_adap,
 				"cx25840", 0x88 >> 1, NULL);
 		if (dev->sd_cx25840) {
+			/* set host data for clk_freq configuration */
+			v4l2_set_subdev_hostdata(dev->sd_cx25840,
+						&dev->clk_freq);
+
 			dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
 			v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
 		}

[PATCH 4.14 142/165] media: s3c-camif: fix out-of-bounds array access

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit a398e043637a4819a0e96467bfecaabf3224dd62 ]

While experimenting with older compiler versions, I ran
into a warning that no longer shows up on gcc-4.8 or newer:

drivers/media/platform/s3c-camif/camif-capture.c: In function '__camif_subdev_try_format':
drivers/media/platform/s3c-camif/camif-capture.c:1265:25: error: array subscript is below array bounds

This is an off-by-one bug, leading to an access before the start of the
array, while newer compilers silently assume this undefined behavior
cannot happen and leave the loop at index 0 if no other entry matches.

As Sylvester explains, we actually need to ensure that the
value is within the range, so this reworks the loop to be
easier to parse correctly, and an additional check to fall
back on the first format value for any unexpected input.

I found an existing gcc bug for it and added a reduced version
of the function there.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69249#c3
Fixes: babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/platform/s3c-camif/camif-capture.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/media/platform/s3c-camif/camif-capture.c
+++ b/drivers/media/platform/s3c-camif/camif-capture.c
@@ -1256,16 +1256,17 @@ static void __camif_subdev_try_format(st
 {
 	const struct s3c_camif_variant *variant = camif->variant;
 	const struct vp_pix_limits *pix_lim;
-	int i = ARRAY_SIZE(camif_mbus_formats);
+	unsigned int i;
 
 	/* FIXME: constraints against codec or preview path ? */
 	pix_lim = &variant->vp_pix_limits[VP_CODEC];
 
-	while (i-- >= 0)
+	for (i = 0; i < ARRAY_SIZE(camif_mbus_formats); i++)
 		if (camif_mbus_formats[i] == mf->code)
 			break;
 
-	mf->code = camif_mbus_formats[i];
+	if (i == ARRAY_SIZE(camif_mbus_formats))
+		mf->code = camif_mbus_formats[0];
 
 	if (pad == CAMIF_SD_PAD_SINK) {
 		v4l_bound_align_image(&mf->width, 8, CAMIF_MAX_PIX_WIDTH,

[PATCH 4.14 143/165] media: lgdt3306a: Fix a double kfree on i2c device remove

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit 94448e21cf08b10f7dc7acdaca387594370396b0 ]

Both lgdt33606a_release and lgdt3306a_remove kfree state, but _release is
called first, then _remove operates on states members before kfree'ing it.
This can lead to random oops/GPF/etc on USB disconnect.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/dvb-frontends/lgdt3306a.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/media/dvb-frontends/lgdt3306a.c
+++ b/drivers/media/dvb-frontends/lgdt3306a.c
@@ -1767,7 +1767,13 @@ static void lgdt3306a_release(struct dvb
 	struct lgdt3306a_state *state = fe->demodulator_priv;
 
 	dbg_info("\n");
-	kfree(state);
+
+	/*
+	 * If state->muxc is not NULL, then we are an i2c device
+	 * and lgdt3306a_remove will clean up state
+	 */
+	if (!state->muxc)
+		kfree(state);
 }
 
 static const struct dvb_frontend_ops lgdt3306a_ops;

[PATCH 4.14 144/165] media: em28xx: Add Hauppauge SoloHD/DualHD bulk models

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit f2a326c928cca1f5e36a3dceaf66e8c6b34e9cb8 ]

Add additional pids to driver list

Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/em28xx/em28xx-cards.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -508,8 +508,10 @@ static struct em28xx_reg_seq plex_px_bcu
 };
 
 /*
- * 2040:0265 Hauppauge WinTV-dualHD DVB
- * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM
+ * 2040:0265 Hauppauge WinTV-dualHD DVB Isoc
+ * 2040:8265 Hauppauge WinTV-dualHD DVB Bulk
+ * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM Isoc
+ * 2040:826d Hauppauge WinTV-dualHD ATSC/QAM Bulk
  * reg 0x80/0x84:
  * GPIO_0: Yellow LED tuner 1, 0=on, 1=off
  * GPIO_1: Green LED tuner 1, 0=on, 1=off
@@ -2392,7 +2394,8 @@ struct em28xx_board em28xx_boards[] = {
 		.has_dvb       = 1,
 	},
 	/*
-	 * 2040:0265 Hauppauge WinTV-dualHD (DVB version).
+	 * 2040:0265 Hauppauge WinTV-dualHD (DVB version) Isoc.
+	 * 2040:8265 Hauppauge WinTV-dualHD (DVB version) Bulk.
 	 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157
 	 */
 	[EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = {
@@ -2407,7 +2410,8 @@ struct em28xx_board em28xx_boards[] = {
 		.leds          = hauppauge_dualhd_leds,
 	},
 	/*
-	 * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM).
+	 * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Isoc.
+	 * 2040:826d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Bulk.
 	 * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157
 	 */
 	[EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = {
@@ -2548,8 +2552,12 @@ struct usb_device_id em28xx_id_table[] =
 			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
 	{ USB_DEVICE(0x2040, 0x0265),
 			.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
+	{ USB_DEVICE(0x2040, 0x8265),
+			.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
 	{ USB_DEVICE(0x2040, 0x026d),
 			.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 },
+	{ USB_DEVICE(0x2040, 0x826d),
+			.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 },
 	{ USB_DEVICE(0x0438, 0xb002),
 			.driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
 	{ USB_DEVICE(0x2001, 0xf112),
@@ -2610,7 +2618,11 @@ struct usb_device_id em28xx_id_table[] =
 			.driver_info = EM28178_BOARD_PCTV_461E },
 	{ USB_DEVICE(0x2013, 0x025f),
 			.driver_info = EM28178_BOARD_PCTV_292E },
-	{ USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD */
+	{ USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD Isoc */
+			.driver_info = EM28178_BOARD_PCTV_292E },
+	{ USB_DEVICE(0x2040, 0x8264), /* Hauppauge OEM Generic WinTV-soloHD Bulk */
+			.driver_info = EM28178_BOARD_PCTV_292E },
+	{ USB_DEVICE(0x2040, 0x8268), /* Hauppauge Retail WinTV-soloHD Bulk */
 			.driver_info = EM28178_BOARD_PCTV_292E },
 	{ USB_DEVICE(0x0413, 0x6f07),
 			.driver_info = EM2861_BOARD_LEADTEK_VC100 },

[PATCH 4.14 145/165] media: v4l: vsp1: Fix display stalls when requesting too many inputs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

[ Upstream commit 5e3e4cb5e24b92773b194aa90066170b12133bc6 ]

Make sure we don't accept more inputs than the hardware can handle. This
is a temporary fix to avoid display stall, we need to instead allocate
the BRU or BRS to display pipelines dynamically based on the number of
planes they each use.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/platform/vsp1/vsp1_drm.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -504,6 +504,15 @@ void vsp1_du_atomic_flush(struct device
 		struct vsp1_rwpf *rpf = vsp1->rpf[i];
 		unsigned int j;
 
+		/*
+		 * Make sure we don't accept more inputs than the hardware can
+		 * handle. This is a temporary fix to avoid display stall, we
+		 * need to instead allocate the BRU or BRS to display pipelines
+		 * dynamically based on the number of planes they each use.
+		 */
+		if (pipe->num_inputs >= pipe->bru->source_pad)
+			pipe->inputs[i] = NULL;
+
 		if (!pipe->inputs[i])
 			continue;
 

[PATCH 4.14 146/165] media: i2c: adv748x: fix HDMI field heights

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kieran Bingham <kieran.bingham@ideasonboard.com>

[ Upstream commit 9f564184e6cc21a86c26bab920afac1bab7653ff ]

The ADV748x handles interlaced media using V4L2_FIELD_ALTERNATE field
types.  The correct specification for the height on the mbus is the
image height, in this instance, the field height.

The AFE component already correctly adjusts the height on the mbus, but
the HDMI component got left behind.

Adjust the mbus height to correctly describe the image height of the
fields when processing interlaced video for HDMI pipelines.

Fixes: 3e89586a64df ("media: i2c: adv748x: add adv748x driver")

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/i2c/adv748x/adv748x-hdmi.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/media/i2c/adv748x/adv748x-hdmi.c
+++ b/drivers/media/i2c/adv748x/adv748x-hdmi.c
@@ -105,6 +105,9 @@ static void adv748x_hdmi_fill_format(str
 
 	fmt->width = hdmi->timings.bt.width;
 	fmt->height = hdmi->timings.bt.height;
+
+	if (fmt->field == V4L2_FIELD_ALTERNATE)
+		fmt->height /= 2;
 }
 
 static void adv748x_fill_optional_dv_timings(struct v4l2_dv_timings *timings)

[PATCH 4.14 147/165] media: vb2: Fix videobuf2 to map correct area

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit d13a0139d7874a0577b5955d6eed895517d23b72 ]

Fixes vb2_vmalloc_get_userptr() to ioremap correct area.
Since the current code does ioremap the page address, if the offset > 0,
it does not do ioremap the last page and results in kernel panic.

This fixes to pass the size + offset to ioremap so that ioremap
can map correct area. Also, this uses __pfn_to_phys() to get the physical
address of given PFN.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Takao Orito <orito.takao@socionext.com>
Reported-by: Fumihiro ATSUMI <atsumi@infinitegra.co.jp>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/videobuf2-vmalloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/v4l2-core/videobuf2-vmalloc.c
+++ b/drivers/media/v4l2-core/videobuf2-vmalloc.c
@@ -106,7 +106,7 @@ static void *vb2_vmalloc_get_userptr(str
 			if (nums[i-1] + 1 != nums[i])
 				goto fail_map;
 		buf->vaddr = (__force void *)
-				ioremap_nocache(nums[0] << PAGE_SHIFT, size);
+			ioremap_nocache(__pfn_to_phys(nums[0]), size + offset);
 	} else {
 		buf->vaddr = vm_map_ram(frame_vector_pages(vec), n_pages, -1,
 					PAGE_KERNEL);

[PATCH 4.14 148/165] media: vivid: fix incorrect capabilities for radio

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hverkuil@xs4all.nl>

[ Upstream commit 65243386f41d38460bfd4375d231a7c0346d0401 ]

The vivid driver has two custom controls that change the behavior of RDS.
Depending on the control setting the V4L2_CAP_READWRITE capability is toggled.
However, after an earlier commit the capability was no longer set correctly.
This is now fixed.

Fixes: 9765a32cd8 ("vivid: set device_caps in video_device")

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/platform/vivid/vivid-ctrls.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/media/platform/vivid/vivid-ctrls.c
+++ b/drivers/media/platform/vivid/vivid-ctrls.c
@@ -1191,6 +1191,7 @@ static int vivid_radio_rx_s_ctrl(struct
 		v4l2_ctrl_activate(dev->radio_rx_rds_ta, dev->radio_rx_rds_controls);
 		v4l2_ctrl_activate(dev->radio_rx_rds_tp, dev->radio_rx_rds_controls);
 		v4l2_ctrl_activate(dev->radio_rx_rds_ms, dev->radio_rx_rds_controls);
+		dev->radio_rx_dev.device_caps = dev->radio_rx_caps;
 		break;
 	case V4L2_CID_RDS_RECEPTION:
 		dev->radio_rx_rds_enabled = ctrl->val;
@@ -1265,6 +1266,7 @@ static int vivid_radio_tx_s_ctrl(struct
 		dev->radio_tx_caps &= ~V4L2_CAP_READWRITE;
 		if (!dev->radio_tx_rds_controls)
 			dev->radio_tx_caps |= V4L2_CAP_READWRITE;
+		dev->radio_tx_dev.device_caps = dev->radio_tx_caps;
 		break;
 	case V4L2_CID_RDS_TX_PTY:
 		if (dev->radio_rx_rds_controls)

[PATCH 4.14 149/165] media: cx25821: prevent out-of-bounds read on array card

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 67300abdbe9f1717532aaf4e037222762716d0f6 ]

Currently an out of range dev->nr is detected by just reporting the
issue and later on an out-of-bounds read on array card occurs because
of this. Fix this by checking the upper range of dev->nr with the size
of array card (removes the hard coded size), move this check earlier
and also exit with the error -ENOSYS to avoid the later out-of-bounds
array read.

Detected by CoverityScan, CID#711191 ("Out-of-bounds-read")

Fixes: commit 02b20b0b4cde ("V4L/DVB (12730): Add conexant cx25821 driver")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: %ld -> %zd]
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/pci/cx25821/cx25821-core.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/media/pci/cx25821/cx25821-core.c
+++ b/drivers/media/pci/cx25821/cx25821-core.c
@@ -867,6 +867,10 @@ static int cx25821_dev_setup(struct cx25
 	dev->nr = ++cx25821_devcount;
 	sprintf(dev->name, "cx25821[%d]", dev->nr);
 
+	if (dev->nr >= ARRAY_SIZE(card)) {
+		CX25821_INFO("dev->nr >= %zd", ARRAY_SIZE(card));
+		return -ENODEV;
+	}
 	if (dev->pci->device != 0x8210) {
 		pr_info("%s(): Exiting. Incorrect Hardware device = 0x%02x\n",
 			__func__, dev->pci->device);
@@ -882,9 +886,6 @@ static int cx25821_dev_setup(struct cx25
 		dev->channels[i].sram_channels = &cx25821_sram_channels[i];
 	}
 
-	if (dev->nr > 1)
-		CX25821_INFO("dev->nr > 1!");
-
 	/* board config */
 	dev->board = 1;		/* card[dev->nr]; */
 	dev->_max_num_decoders = MAX_DECODERS;

[PATCH 4.14 150/165] serial: xuartps: Fix out-of-bounds access through DT alias

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit e7d75e18d0fc3f7193b65282b651f980c778d935 ]

The cdns_uart_port[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Fixes: 928e9263492069ee ("tty: xuartps: Initialize ports according to aliases")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/xilinx_uartps.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1115,7 +1115,7 @@ static struct uart_port *cdns_uart_get_p
 	struct uart_port *port;
 
 	/* Try the given port id if failed use default method */
-	if (cdns_uart_port[id].mapbase != 0) {
+	if (id < CDNS_UART_NR_PORTS && cdns_uart_port[id].mapbase != 0) {
 		/* Find the next unused port */
 		for (id = 0; id < CDNS_UART_NR_PORTS; id++)
 			if (cdns_uart_port[id].mapbase == 0)

[PATCH 4.14 151/165] serial: sh-sci: Fix out-of-bounds access through DT alias

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 090fa4b0dccfa3d04e1c5ab0fe4eba16e6713895 ]

The sci_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_SH_SCI_NR_UARTS), so this can even be triggered using a
legitimate DTB.

Fixes: 97ed9790c514066b ("serial: sh-sci: Remove unused platform data capabilities field")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/sh-sci.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -3076,6 +3076,10 @@ static struct plat_sci_port *sci_parse_d
 		dev_err(&pdev->dev, "failed to get alias id (%d)\n", id);
 		return NULL;
 	}
+	if (id >= ARRAY_SIZE(sci_ports)) {
+		dev_err(&pdev->dev, "serial%d out of range\n", id);
+		return NULL;
+	}
 
 	sp = &sci_ports[id];
 	*dev_id = id;

[PATCH 4.14 152/165] serial: samsung: Fix out-of-bounds access through serial port index

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 49ee23b71877831ac087d6083f6f397dc19c9664 ]

The s3c24xx_serial_ports[] array is indexed using a value derived from
the "serialN" alias in DT, or from an incrementing probe index, which
may lead to an out-of-bounds access.

Fix this by adding a range check.

Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_SAMSUNG_UARTS), so this can even be triggered using
a legitimate DTB or legitimate board code.

Fixes: 13a9f6c64fdc55eb ("serial: samsung: Consider DT alias when probing ports")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/samsung.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1821,6 +1821,10 @@ static int s3c24xx_serial_probe(struct p
 
 	dbg("s3c24xx_serial_probe(%p) %d\n", pdev, index);
 
+	if (index >= ARRAY_SIZE(s3c24xx_serial_ports)) {
+		dev_err(&pdev->dev, "serial%d out of range\n", index);
+		return -EINVAL;
+	}
 	ourport = &s3c24xx_serial_ports[index];
 
 	ourport->drv_data = s3c24xx_get_driver_data(pdev);

[PATCH 4.14 153/165] serial: mxs-auart: Fix out-of-bounds access through serial port index

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit dd345a31bfdec350d2593e6de5964e55c7f19c76 ]

The auart_port[] array is indexed using a value derived from the
"serialN" alias in DT, or from platform data, which may lead to an
out-of-bounds access.

Fix this by adding a range check.

Fixes: 1ea6607d4cdc9179 ("serial: mxs-auart: Allow device tree probing")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/mxs-auart.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1667,6 +1667,10 @@ static int mxs_auart_probe(struct platfo
 		s->port.line = pdev->id < 0 ? 0 : pdev->id;
 	else if (ret < 0)
 		return ret;
+	if (s->port.line >= ARRAY_SIZE(auart_port)) {
+		dev_err(&pdev->dev, "serial%d out of range\n", s->port.line);
+		return -EINVAL;
+	}
 
 	if (of_id) {
 		pdev->id_entry = of_id->data;

[PATCH 4.14 154/165] serial: imx: Fix out-of-bounds access through serial port index

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 5673444821406dda5fc25e4b52aca419f8065a19 ]

The imx_ports[] array is indexed using a value derived from the
"serialN" alias in DT, or from platform data, which may lead to an
out-of-bounds access.

Fix this by adding a range check.

Fixes: ff05967a07225ab6 ("serial/imx: add of_alias_get_id() reference back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/imx.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2096,6 +2096,12 @@ static int serial_imx_probe(struct platf
 	else if (ret < 0)
 		return ret;
 
+	if (sport->port.line >= ARRAY_SIZE(imx_ports)) {
+		dev_err(&pdev->dev, "serial%d out of range\n",
+			sport->port.line);
+		return -EINVAL;
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(base))

[PATCH 4.14 155/165] serial: fsl_lpuart: Fix out-of-bounds access through DT alias

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit ffab87fdecc655cc676f8be8dd1a2c5e22bd6d47 ]

The lpuart_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Fixes: c9e2e946fb0ba5d2 ("tty: serial: add Freescale lpuart driver support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/fsl_lpuart.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2151,6 +2151,10 @@ static int lpuart_probe(struct platform_
 		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
 		return ret;
 	}
+	if (ret >= ARRAY_SIZE(lpuart_ports)) {
+		dev_err(&pdev->dev, "serial%d out of range\n", ret);
+		return -EINVAL;
+	}
 	sport->port.line = ret;
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	sport->port.membase = devm_ioremap_resource(&pdev->dev, res);

[PATCH 4.14 156/165] serial: arc_uart: Fix out-of-bounds access through DT alias

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit f9f5786987e81d166c60833edcb7d1836aa16944 ]

The arc_uart_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_ARC_NR_PORTS), so this can even be triggered using a
legitimate DTB.

Fixes: ea28fd56fcde69af ("serial/arc-uart: switch to devicetree based probing")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/arc_uart.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -596,6 +596,11 @@ static int arc_serial_probe(struct platf
 	if (dev_id < 0)
 		dev_id = 0;
 
+	if (dev_id >= ARRAY_SIZE(arc_uart_ports)) {
+		dev_err(&pdev->dev, "serial%d out of range\n", dev_id);
+		return -EINVAL;
+	}
+
 	uart = &arc_uart_ports[dev_id];
 	port = &uart->port;
 

[PATCH 4.14 157/165] serial: 8250: Dont service RX FIFO if interrupts are disabled

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit 2e9fe539108320820016f78ca7704a7342788380 ]

Currently, data in RX FIFO is read based on UART_LSR register state even
if RDI and RLSI interrupts are disabled in UART_IER register.
This is because when IRQ handler is called due to TX FIFO empty event,
RX FIFO is serviced based on UART_LSR register status instead of
UART_IIR status. This defeats the purpose of disabling UART RX
FIFO interrupts during throttling(see, omap_8250_throttle()) as IRQ
handler continues to drain UART RX FIFO resulting in overflow of buffer
at tty layer.
Fix this by making sure that driver drains UART RX FIFO only when
UART_IIR_RDI is set along with UART_LSR_BI or UART_LSR_DR bits.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_port.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1874,7 +1874,8 @@ int serial8250_handle_irq(struct uart_po
 
 	status = serial_port_in(port, UART_LSR);
 
-	if (status & (UART_LSR_DR | UART_LSR_BI)) {
+	if (status & (UART_LSR_DR | UART_LSR_BI) &&
+	    iir & UART_IIR_RDI) {
 		if (!up->dma || handle_rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
 	}

[PATCH 4.14 158/165] serial: altera: ensure port->regshift is honored consistently

[Greg Kroah-Hartman]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 2475 bytes --]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>

[ Upstream commit 0e254963b6ba4d63ac911e79537fea38dd03dc50 ]

Most register accesses in the altera driver honor port->regshift by
using altera_uart_writel(). There are a few accesses however that were
missed when the driver was converted to use port->regshift and some
others were added later in commit 4d9d7d896d77 ("serial: altera_uart:
add earlycon support").

Fixes: 2780ad42f5fe ("tty: serial: altera_uart: Use port->regshift to store bus shift")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/altera_uart.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -331,7 +331,7 @@ static int altera_uart_startup(struct ua
 
 	/* Enable RX interrupts now */
 	pp->imr = ALTERA_UART_CONTROL_RRDY_MSK;
-	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 
@@ -347,7 +347,7 @@ static void altera_uart_shutdown(struct
 
 	/* Disable all interrupts now */
 	pp->imr = 0;
-	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 
@@ -436,7 +436,7 @@ static void altera_uart_console_putc(str
 		 ALTERA_UART_STATUS_TRDY_MSK))
 		cpu_relax();
 
-	writel(c, port->membase + ALTERA_UART_TXDATA_REG);
+	altera_uart_writel(port, c, ALTERA_UART_TXDATA_REG);
 }
 
 static void altera_uart_console_write(struct console *co, const char *s,
@@ -506,13 +506,13 @@ static int __init altera_uart_earlycon_s
 		return -ENODEV;
 
 	/* Enable RX interrupts now */
-	writel(ALTERA_UART_CONTROL_RRDY_MSK,
-	       port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_writel(port, ALTERA_UART_CONTROL_RRDY_MSK,
+			   ALTERA_UART_CONTROL_REG);
 
 	if (dev->baud) {
 		unsigned int baudclk = port->uartclk / dev->baud;
 
-		writel(baudclk, port->membase + ALTERA_UART_DIVISOR_REG);
+		altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
 	}
 
 	dev->con->write = altera_uart_earlycon_write;

[PATCH 4.14 159/165] rtc: snvs: Fix usage of snvs_rtc_enable

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bryan O'Donoghue <pure.logic@nexus-software.ie>

[ Upstream commit 1485991c024603b2fb4ae77beb7a0d741128a48e ]

commit 179a502f8c46 ("rtc: snvs: add Freescale rtc-snvs driver") introduces
the SNVS RTC driver with a function snvs_rtc_enable().

snvs_rtc_enable() can return an error on the enable path however this
driver does not currently trap that failure on the probe() path and
consequently if enabling the RTC fails we encounter a later error spinning
forever in rtc_write_sync_lp().

[   36.093481] [<c010d630>] (__irq_svc) from [<c0c2e9ec>] (_raw_spin_unlock_irqrestore+0x34/0x44)
[   36.102122] [<c0c2e9ec>] (_raw_spin_unlock_irqrestore) from [<c072e32c>] (regmap_read+0x4c/0x5c)
[   36.110938] [<c072e32c>] (regmap_read) from [<c085d0f4>] (rtc_write_sync_lp+0x6c/0x98)
[   36.118881] [<c085d0f4>] (rtc_write_sync_lp) from [<c085d160>] (snvs_rtc_alarm_irq_enable+0x40/0x4c)
[   36.128041] [<c085d160>] (snvs_rtc_alarm_irq_enable) from [<c08567b4>] (rtc_timer_do_work+0xd8/0x1a8)
[   36.137291] [<c08567b4>] (rtc_timer_do_work) from [<c01441b8>] (process_one_work+0x28c/0x76c)
[   36.145840] [<c01441b8>] (process_one_work) from [<c01446cc>] (worker_thread+0x34/0x58c)
[   36.153961] [<c01446cc>] (worker_thread) from [<c014aee4>] (kthread+0x138/0x150)
[   36.161388] [<c014aee4>] (kthread) from [<c0107e14>] (ret_from_fork+0x14/0x20)
[   36.168635] rcu_sched kthread starved for 2602 jiffies! g496 c495 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=0
[   36.178564] rcu_sched       R  running task        0     8      2 0x00000000
[   36.185664] [<c0c288b0>] (__schedule) from [<c0c29134>] (schedule+0x3c/0xa0)
[   36.192739] [<c0c29134>] (schedule) from [<c0c2db80>] (schedule_timeout+0x78/0x4e0)
[   36.200422] [<c0c2db80>] (schedule_timeout) from [<c01a7ab0>] (rcu_gp_kthread+0x648/0x1864)
[   36.208800] [<c01a7ab0>] (rcu_gp_kthread) from [<c014aee4>] (kthread+0x138/0x150)
[   36.216309] [<c014aee4>] (kthread) from [<c0107e14>] (ret_from_fork+0x14/0x20)

This patch fixes by parsing the result of rtc_write_sync_lp() and
propagating both in the probe and elsewhere. If the RTC doesn't start we
don't proceed loading the driver and don't get into this loop mess later
on.

Fixes: 179a502f8c46 ("rtc: snvs: add Freescale rtc-snvs driver")
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-snvs.c |   15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -132,20 +132,23 @@ static int snvs_rtc_set_time(struct devi
 {
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
 	unsigned long time;
+	int ret;
 
 	rtc_tm_to_time(tm, &time);
 
 	/* Disable RTC first */
-	snvs_rtc_enable(data, false);
+	ret = snvs_rtc_enable(data, false);
+	if (ret)
+		return ret;
 
 	/* Write 32-bit time to 47-bit timer, leaving 15 LSBs blank */
 	regmap_write(data->regmap, data->offset + SNVS_LPSRTCLR, time << CNTR_TO_SECS_SH);
 	regmap_write(data->regmap, data->offset + SNVS_LPSRTCMR, time >> (32 - CNTR_TO_SECS_SH));
 
 	/* Enable RTC again */
-	snvs_rtc_enable(data, true);
+	ret = snvs_rtc_enable(data, true);
 
-	return 0;
+	return ret;
 }
 
 static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
@@ -288,7 +291,11 @@ static int snvs_rtc_probe(struct platfor
 	regmap_write(data->regmap, data->offset + SNVS_LPSR, 0xffffffff);
 
 	/* Enable RTC */
-	snvs_rtc_enable(data, true);
+	ret = snvs_rtc_enable(data, true);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable rtc %d\n", ret);
+		goto error_rtc_device_register;
+	}
 
 	device_init_wakeup(&pdev->dev, true);
 

[PATCH 4.14 160/165] rtc: hctosys: Ensure system time doesnt overflow time_t

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit b3a5ac42ab18b7d1a8f2f072ca0ee76a3b754a43 ]

On 32bit platforms, time_t is still a signed 32bit long. If it is
overflowed, userspace and the kernel cant agree on the current system time.
This causes multiple issues, in particular with systemd:
https://github.com/systemd/systemd/issues/1143

A good workaround is to simply avoid using hctosys which is something I
greatly encourage as the time is better set by userspace.

However, many distribution enable it and use systemd which is rendering the
system unusable in case the RTC holds a date after 2038 (and more so after
2106). Many drivers have workaround for this case and they should be
eliminated so there is only one place left to fix when userspace is able to
cope with dates after the 31bit overflow.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/hctosys.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/rtc/hctosys.c
+++ b/drivers/rtc/hctosys.c
@@ -49,6 +49,11 @@ static int __init rtc_hctosys(void)
 
 	tv64.tv_sec = rtc_tm_to_time64(&tm);
 
+#if BITS_PER_LONG == 32
+	if (tv64.tv_sec > INT_MAX)
+		goto err_read;
+#endif
+
 	err = do_settimeofday64(&tv64);
 
 	dev_info(rtc->dev.parent,

[PATCH 4.14 161/165] rtc: rk808: fix possible race condition

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 201fac95e799c3d0304ec724d555e1251b9f6e84 ]

The probe function is not allowed to fail after registering the RTC because
the following may happen:

CPU0:                                CPU1:
sys_load_module()
 do_init_module()
  do_one_initcall()
   cmos_do_probe()
    rtc_device_register()
     __register_chrdev()
     cdev->owner = struct module*
                                     open("/dev/rtc0")
    rtc_device_unregister()
  module_put()
  free_module()
   module_free(mod->module_core)
   /* struct module *module is now
      freed */
                                      chrdev_open()
                                       spin_lock(cdev_lock)
                                       cdev_get()
                                        try_module_get()
                                         module_is_live()
                                         /* dereferences already
                                            freed struct module* */

Switch to devm_rtc_allocate_device/rtc_register_device to register the rtc
as late as possible.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-rk808.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/rtc/rtc-rk808.c
+++ b/drivers/rtc/rtc-rk808.c
@@ -416,12 +416,11 @@ static int rk808_rtc_probe(struct platfo
 
 	device_init_wakeup(&pdev->dev, 1);
 
-	rk808_rtc->rtc = devm_rtc_device_register(&pdev->dev, "rk808-rtc",
-						  &rk808_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rk808_rtc->rtc)) {
-		ret = PTR_ERR(rk808_rtc->rtc);
-		return ret;
-	}
+	rk808_rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rk808_rtc->rtc))
+		return PTR_ERR(rk808_rtc->rtc);
+
+	rk808_rtc->rtc->ops = &rk808_rtc_ops;
 
 	rk808_rtc->irq = platform_get_irq(pdev, 0);
 	if (rk808_rtc->irq < 0) {
@@ -438,9 +437,10 @@ static int rk808_rtc_probe(struct platfo
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
 			rk808_rtc->irq, ret);
+		return ret;
 	}
 
-	return ret;
+	return rtc_register_device(rk808_rtc->rtc);
 }
 
 static struct platform_driver rk808_rtc_driver = {

[PATCH 4.14 162/165] rtc: m41t80: fix race conditions

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 10d0c768cc6d581523d673b9d1b54213f8a5eb24 ]

The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler, leading to:

Unable to handle kernel NULL pointer dereference at virtual address 0000017c
pgd = a38a2f9b
[0000017c] *pgd=00000000
Internal error: Oops: 5 [#1] ARM
Modules linked in:
CPU: 0 PID: 613 Comm: irq/48-m41t80 Not tainted 4.16.0-rc1+ #42
Hardware name: Atmel SAMA5
PC is at mutex_lock+0x14/0x38
LR is at m41t80_handle_irq+0x1c/0x9c
pc : [<c06e864c>]    lr : [<c04b70f0>]    psr: 20000013
sp : dec73f30  ip : 00000000  fp : dec56d98
r10: df437cf0  r9 : c0a03008  r8 : c0145ffc
r7 : df5c4300  r6 : dec568d0  r5 : df593000  r4 : 0000017c
r3 : df592800  r2 : 60000013  r1 : df593000  r0 : 0000017c
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c53c7d  Table: 20004059  DAC: 00000051
Process irq/48-m41t80 (pid: 613, stack limit = 0xb52d091e)
Stack: (0xdec73f30 to 0xdec74000)
3f20:                                     dec56840 df5c4300 00000001 df5c4300
3f40: c0145ffc c0146018 dec56840 ffffe000 00000001 c0146290 dec567c0 00000000
3f60: c0146084 ed7c9a62 c014615c dec56d80 dec567c0 00000000 dec72000 dec56840
3f80: c014615c c012ffc0 dec72000 dec567c0 c012fe80 00000000 00000000 00000000
3fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 29282726 2d2c2b2a
[<c06e864c>] (mutex_lock) from [<c04b70f0>] (m41t80_handle_irq+0x1c/0x9c)
[<c04b70f0>] (m41t80_handle_irq) from [<c0146018>] (irq_thread_fn+0x1c/0x54)
[<c0146018>] (irq_thread_fn) from [<c0146290>] (irq_thread+0x134/0x1c0)
[<c0146290>] (irq_thread) from [<c012ffc0>] (kthread+0x140/0x148)
[<c012ffc0>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xdec73fb0 to 0xdec73ff8)
3fa0:                                     00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Code: e3c33d7f e3c3303f f5d0f000 e593300c (e1901f9f)
---[ end trace 22b027302eb7c604 ]---
genirq: exiting task "irq/48-m41t80" (613) is an active IRQ thread (irq 48)

Also, there is another possible race condition. The probe function is not
allowed to fail after the RTC is registered because the following may
happen:

CPU0:                                CPU1:
sys_load_module()
 do_init_module()
  do_one_initcall()
   cmos_do_probe()
    rtc_device_register()
     __register_chrdev()
     cdev->owner = struct module*
                                     open("/dev/rtc0")
    rtc_device_unregister()
  module_put()
  free_module()
   module_free(mod->module_core)
   /* struct module *module is now
      freed */
                                      chrdev_open()
                                       spin_lock(cdev_lock)
                                       cdev_get()
                                        try_module_get()
                                         module_is_live()
                                         /* dereferences already
                                            freed struct module* */

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ and register it as late as possible.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-m41t80.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -885,7 +885,6 @@ static int m41t80_probe(struct i2c_clien
 {
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 	int rc = 0;
-	struct rtc_device *rtc = NULL;
 	struct rtc_time tm;
 	struct m41t80_data *m41t80_data = NULL;
 	bool wakeup_source = false;
@@ -909,6 +908,10 @@ static int m41t80_probe(struct i2c_clien
 		m41t80_data->features = id->driver_data;
 	i2c_set_clientdata(client, m41t80_data);
 
+	m41t80_data->rtc =  devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(m41t80_data->rtc))
+		return PTR_ERR(m41t80_data->rtc);
+
 #ifdef CONFIG_OF
 	wakeup_source = of_property_read_bool(client->dev.of_node,
 					      "wakeup-source");
@@ -932,15 +935,11 @@ static int m41t80_probe(struct i2c_clien
 		device_init_wakeup(&client->dev, true);
 	}
 
-	rtc = devm_rtc_device_register(&client->dev, client->name,
-				       &m41t80_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtc))
-		return PTR_ERR(rtc);
+	m41t80_data->rtc->ops = &m41t80_rtc_ops;
 
-	m41t80_data->rtc = rtc;
 	if (client->irq <= 0) {
 		/* We cannot support UIE mode if we do not have an IRQ line */
-		rtc->uie_unsupported = 1;
+		m41t80_data->rtc->uie_unsupported = 1;
 	}
 
 	/* Make sure HT (Halt Update) bit is cleared */
@@ -993,6 +992,11 @@ static int m41t80_probe(struct i2c_clien
 	if (m41t80_data->features & M41T80_FEATURE_SQ)
 		m41t80_sqw_register_clk(m41t80_data);
 #endif
+
+	rc = rtc_register_device(m41t80_data->rtc);
+	if (rc)
+		return rc;
+
 	return 0;
 }
 

[PATCH 4.14 163/165] rtc: tx4939: avoid unintended sign extension on a 24 bit shift

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 347876ad47b9923ce26e686173bbf46581802ffa ]

The shifting of buf[5] by 24 bits to the left will be promoted to
a 32 bit signed int and then sign-extended to an unsigned long. If
the top bit of buf[5] is set then all then all the upper bits sec
end up as also being set because of the sign-extension. Fix this by
casting buf[5] to an unsigned long before the shift.

Detected by CoverityScan, CID#1465292 ("Unintended sign extension")

Fixes: 0e1492330cd2 ("rtc: add rtc-tx4939 driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-tx4939.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/rtc/rtc-tx4939.c
+++ b/drivers/rtc/rtc-tx4939.c
@@ -86,7 +86,8 @@ static int tx4939_rtc_read_time(struct d
 	for (i = 2; i < 6; i++)
 		buf[i] = __raw_readl(&rtcreg->dat);
 	spin_unlock_irq(&pdata->lock);
-	sec = (buf[5] << 24) | (buf[4] << 16) | (buf[3] << 8) | buf[2];
+	sec = ((unsigned long)buf[5] << 24) | (buf[4] << 16) |
+		(buf[3] << 8) | buf[2];
 	rtc_time_to_tm(sec, tm);
 	return rtc_valid_tm(tm);
 }
@@ -147,7 +148,8 @@ static int tx4939_rtc_read_alarm(struct
 	alrm->enabled = (ctl & TX4939_RTCCTL_ALME) ? 1 : 0;
 	alrm->pending = (ctl & TX4939_RTCCTL_ALMD) ? 1 : 0;
 	spin_unlock_irq(&pdata->lock);
-	sec = (buf[5] << 24) | (buf[4] << 16) | (buf[3] << 8) | buf[2];
+	sec = ((unsigned long)buf[5] << 24) | (buf[4] << 16) |
+		(buf[3] << 8) | buf[2];
 	rtc_time_to_tm(sec, &alrm->time);
 	return rtc_valid_tm(&alrm->time);
 }

[PATCH 4.14 164/165] rtc: rp5c01: fix possible race condition

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit bcdd559268039d8340d38fa58668393596e29fdc ]

The probe function is not allowed to fail after registering the RTC because
the following may happen:

CPU0:                                CPU1:
sys_load_module()
 do_init_module()
  do_one_initcall()
   cmos_do_probe()
    rtc_device_register()
     __register_chrdev()
     cdev->owner = struct module*
                                     open("/dev/rtc0")
    rtc_device_unregister()
  module_put()
  free_module()
   module_free(mod->module_core)
   /* struct module *module is now
      freed */
                                      chrdev_open()
                                       spin_lock(cdev_lock)
                                       cdev_get()
                                        try_module_get()
                                         module_is_live()
                                         /* dereferences already
                                            freed struct module* */

Switch to devm_rtc_allocate_device/rtc_register_device to register the rtc
as late as possible.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-rp5c01.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/drivers/rtc/rtc-rp5c01.c
+++ b/drivers/rtc/rtc-rp5c01.c
@@ -249,16 +249,24 @@ static int __init rp5c01_rtc_probe(struc
 
 	platform_set_drvdata(dev, priv);
 
-	rtc = devm_rtc_device_register(&dev->dev, "rtc-rp5c01", &rp5c01_rtc_ops,
-				  THIS_MODULE);
+	rtc = devm_rtc_allocate_device(&dev->dev);
 	if (IS_ERR(rtc))
 		return PTR_ERR(rtc);
+
+	rtc->ops = &rp5c01_rtc_ops;
+
 	priv->rtc = rtc;
 
 	error = sysfs_create_bin_file(&dev->dev.kobj, &priv->nvram_attr);
 	if (error)
 		return error;
 
+	error = rtc_register_device(rtc);
+	if (error) {
+		sysfs_remove_bin_file(&dev->dev.kobj, &priv->nvram_attr);
+		return error;
+	}
+
 	return 0;
 }
 

[PATCH 4.14 165/165] rtc: goldfish: Add missing MODULE_LICENSE

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <jhogan@kernel.org>

[ Upstream commit 82d632b85eb89f97051530f556cb49ee1c04bde7 ]

Fix the following warning in MIPS allmodconfig by adding a
MODULE_LICENSE() at the end of rtc-goldfish.c, based on the file header
comment which says GNU General Public License version 2:

WARNING: modpost: missing MODULE_LICENSE() in drivers/rtc/rtc-goldfish.o

Fixes: f22d9cdcb5eb ("rtc: goldfish: Add RTC driver for Android emulator")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: linux-rtc@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-goldfish.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/rtc/rtc-goldfish.c
+++ b/drivers/rtc/rtc-goldfish.c
@@ -235,3 +235,5 @@ static struct platform_driver goldfish_r
 };
 
 module_platform_driver(goldfish_rtc);
+
+MODULE_LICENSE("GPL v2");

Re: [PATCH 4.14 110/165] scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()

[Steffen Maier]

Hopefully I haven't missed it in the stable queue, but do we need the 
following on top (effectively not applying e39a97353e53)?:

commit cbe095e2b584623b882ebaf6c18e0b9077baa3f7
Author: Bart Van Assche <bart.vanassche@wdc.com>
Date:   Thu Apr 5 10:32:59 2018 -0700

     Revert "scsi: core: return BLK_STS_OK for DID_OK in 
__scsi_error_from_host_byte()"

     The description of commit e39a97353e53 is wrong: it mentions that 
commit
     2a842acab109 introduced a bug in __scsi_error_from_host_byte() 
although that
     commit did not change the behavior of that function.  Additionally, 
commit
     e39a97353e53 introduced a bug: it causes commands that fail with
     hostbyte=DID_OK and driverbyte=DRIVER_SENSE to be completed with
     BLK_STS_OK. Hence revert that commit.

     Fixes: e39a97353e53 ("scsi: core: return BLK_STS_OK for DID_OK in 
__scsi_error_from_host_byte()")
     Reported-by: Damien Le Moal <damien.lemoal@wdc.com>
     Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
     Cc: Hannes Reinecke <hare@suse.com>
     Cc: Douglas Gilbert <dgilbert@interlog.com>
     Cc: Damien Le Moal <damien.lemoal@wdc.com>
     Cc: Christoph Hellwig <hch@lst.de>
     Cc: Lee Duncan <lduncan@suse.com>
     Cc: stable@vger.kernel.org
     Reviewed-by: Christoph Hellwig <hch@lst.de>
     Reviewed-by: Hannes Reinecke <hare@suse.com>
     Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>


On 05/24/2018 11:38 AM, Greg Kroah-Hartman wrote:
> 4.14-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Hannes Reinecke <hare@suse.de>
> 
> [ Upstream commit e39a97353e5378eb46bf01679799c5704d397f32 ]
> 
> When converting __scsi_error_from_host_byte() to BLK_STS error codes the
> case DID_OK was forgotten, resulting in it always returning an error.
> 
> Fixes: 2a842acab109 ("block: introduce new block status code type")
> Cc: Doug Gilbert <dgilbert@interlog.com>
> Signed-off-by: Hannes Reinecke <hare@suse.com>
> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>   drivers/scsi/scsi_lib.c |    2 ++
>   1 file changed, 2 insertions(+)
> 
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -720,6 +720,8 @@ static blk_status_t __scsi_error_from_ho
>   		int result)
>   {
>   	switch (host_byte(result)) {
> +	case DID_OK:
> +		return BLK_STS_OK;
>   	case DID_TRANSPORT_FAILFAST:
>   		return BLK_STS_TRANSPORT;
>   	case DID_TARGET_FAILURE:
> 
> 


-- 
Mit freundlichen Gruessen / Kind regards
Steffen Maier

Linux on IBM Z Development

IBM Deutschland Research & Development GmbH
Vorsitzende des Aufsichtsrats: Martina Koederitz
Geschaeftsfuehrung: Dirk Wittkopp
Sitz der Gesellschaft: Boeblingen
Registergericht: Amtsgericht Stuttgart, HRB 243294

Re: [PATCH 4.14 110/165] scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()

[Greg Kroah-Hartman]

On Thu, May 24, 2018 at 02:19:29PM +0200, Steffen Maier wrote:
> Hopefully I haven't missed it in the stable queue, but do we need the
> following on top (effectively not applying e39a97353e53)?:
> 
> commit cbe095e2b584623b882ebaf6c18e0b9077baa3f7
> Author: Bart Van Assche <bart.vanassche@wdc.com>
> Date:   Thu Apr 5 10:32:59 2018 -0700
> 
>     Revert "scsi: core: return BLK_STS_OK for DID_OK in
> __scsi_error_from_host_byte()"
> 
>     The description of commit e39a97353e53 is wrong: it mentions that commit
>     2a842acab109 introduced a bug in __scsi_error_from_host_byte() although
> that
>     commit did not change the behavior of that function.  Additionally,
> commit
>     e39a97353e53 introduced a bug: it causes commands that fail with
>     hostbyte=DID_OK and driverbyte=DRIVER_SENSE to be completed with
>     BLK_STS_OK. Hence revert that commit.
> 
>     Fixes: e39a97353e53 ("scsi: core: return BLK_STS_OK for DID_OK in
> __scsi_error_from_host_byte()")
>     Reported-by: Damien Le Moal <damien.lemoal@wdc.com>
>     Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
>     Cc: Hannes Reinecke <hare@suse.com>
>     Cc: Douglas Gilbert <dgilbert@interlog.com>
>     Cc: Damien Le Moal <damien.lemoal@wdc.com>
>     Cc: Christoph Hellwig <hch@lst.de>
>     Cc: Lee Duncan <lduncan@suse.com>
>     Cc: stable@vger.kernel.org
>     Reviewed-by: Christoph Hellwig <hch@lst.de>
>     Reviewed-by: Hannes Reinecke <hare@suse.com>
>     Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Oops, yeah, I'll go drop this one from the queue, we shouldn't take it
at all, as that's easier than applying it and then reverting it again.

Thanks for letting me know.

greg k-h

Re: [PATCH 4.14 000/165] 4.14.44-stable review

[Nathan Chancellor]

On Thu, May 24, 2018 at 11:36:46AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.44 release.
> There are 165 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat May 26 09:35:46 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.44-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Merged, compiled, and installed onto my Raspberry Pi 3.

No initial issues noticed in general usage or dmesg.

Thanks!
Nathan

Re: [PATCH 4.14 000/165] 4.14.44-stable review

[kernelci.org bot]

stable-rc/linux-4.14.y boot: 120 boots: 1 failed, 114 passed with 5 offline (v4.14.43-166-ga3881b7a4d3c)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.43-166-ga3881b7a4d3c/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.43-166-ga3881b7a4d3c/

Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.43-166-ga3881b7a4d3c
Git Commit: a3881b7a4d3c9991599672e83cbfb2eb26359dc8
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 63 unique boards, 24 SoC families, 15 builds out of 185

Boot Regressions Detected:

arm64:

    defconfig:
        meson-gxl-s905x-khadas-vim:
            lab-baylibre: failing since 29 days (last pass: v4.14.26-140-g2a1700a4929f - first fail: v4.14.36-184-g3cd53e436ee2)

Boot Failure Detected:

arm64:

    defconfig
        meson-gxl-s905x-khadas-vim: 1 failed lab

Offline Platforms:

arm:

    imx_v6_v7_defconfig:
        imx7s-warp: 1 offline lab

    multi_v7_defconfig:
        imx7s-warp: 1 offline lab

arm64:

    defconfig:
        meson-gxbb-p200: 1 offline lab
        meson-gxl-s905x-khadas-vim: 1 offline lab
        sun50i-a64-pine64-plus: 1 offline lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.14 000/165] 4.14.44-stable review

[Guenter Roeck]

On Thu, May 24, 2018 at 11:36:46AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.44 release.
> There are 165 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat May 26 09:35:46 UTC 2018.
> Anything received after that time might be too late.
> 

For v4.14.43-165-g04c5715:

Build results:
	total: 146 pass: 146 fail: 0
Qemu test results:
	total: 141 pass: 141 fail: 0

Details are available at http://kerneltests.org/builders/.

Guenter

Re: [PATCH 4.14 000/165] 4.14.44-stable review

[Dan Rue]

On Thu, May 24, 2018 at 11:36:46AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.44 release.
> There are 165 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat May 26 09:35:46 UTC 2018.
> Anything received after that time might be too late.

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.14.44-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 04c57158a60d4a6b72a8d04b39390eb2dbad0e73
git describe: v4.14.43-165-g04c57158a60d
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.43-165-g04c57158a60d


No regressions (compared to build v4.14.43-166-ga3881b7a4d3c)


Ran 11106 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-containers-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* ltp-cap_bounds-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 000/165] 4.14.44-stable review

[Guenter Roeck]

On Thu, May 24, 2018 at 01:12:09PM -0500, Dan Rue wrote:
> On Thu, May 24, 2018 at 11:36:46AM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.44 release.
> > There are 165 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat May 26 09:35:46 UTC 2018.
> > Anything received after that time might be too late.
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm and x86_64.
> 
> Summary
> ------------------------------------------------------------------------
> 
> kernel: 4.14.44-rc1
> git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> git branch: linux-4.14.y
> git commit: 04c57158a60d4a6b72a8d04b39390eb2dbad0e73
> git describe: v4.14.43-165-g04c57158a60d
> Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.43-165-g04c57158a60d
> 
> 
> No regressions (compared to build v4.14.43-166-ga3881b7a4d3c)
> 

Same question as before. Why not against v4.14.43 ?

Thanks,
Guenter

> 
> Ran 11106 total tests in the following environments and test suites.
> 
> Environments
> --------------
> - dragonboard-410c - arm64
> - hi6220-hikey - arm64
> - juno-r2 - arm64
> - qemu_arm
> - qemu_arm64
> - qemu_x86_64
> - x15 - arm
> - x86_64
> 
> Test Suites
> -----------
> * boot
> * kselftest
> * libhugetlbfs
> * ltp-containers-tests
> * ltp-fcntl-locktests-tests
> * ltp-filecaps-tests
> * ltp-fs-tests
> * ltp-fs_bind-tests
> * ltp-fs_perms_simple-tests
> * ltp-fsx-tests
> * ltp-hugetlb-tests
> * ltp-io-tests
> * ltp-ipc-tests
> * ltp-math-tests
> * ltp-nptl-tests
> * ltp-pty-tests
> * ltp-sched-tests
> * ltp-securebits-tests
> * ltp-syscalls-tests
> * ltp-timers-tests
> * ltp-cap_bounds-tests
> * kselftest-vsyscall-mode-native
> * kselftest-vsyscall-mode-none
> 
> -- 
> Linaro LKFT
> https://lkft.linaro.org

Re: [PATCH 4.14 000/165] 4.14.44-stable review

[Dan Rue]

On Thu, May 24, 2018 at 11:19:21AM -0700, Guenter Roeck wrote:
> On Thu, May 24, 2018 at 01:12:09PM -0500, Dan Rue wrote:
> > On Thu, May 24, 2018 at 11:36:46AM +0200, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.14.44 release.
> > > There are 165 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Sat May 26 09:35:46 UTC 2018.
> > > Anything received after that time might be too late.
> > 
> > Results from Linaro’s test farm.
> > No regressions on arm64, arm and x86_64.
> > 
> > Summary
> > ------------------------------------------------------------------------
> > 
> > kernel: 4.14.44-rc1
> > git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> > git branch: linux-4.14.y
> > git commit: 04c57158a60d4a6b72a8d04b39390eb2dbad0e73
> > git describe: v4.14.43-165-g04c57158a60d
> > Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.43-165-g04c57158a60d
> > 
> > 
> > No regressions (compared to build v4.14.43-166-ga3881b7a4d3c)
> > 
> 
> Same question as before. Why not against v4.14.43 ?

It's because the system just looks at the previous build. I agree that
it should compare against the release. In any event, we go through all
failures manually before reporting "no regressions" just in case the
automatic regression detection missed it. We also review the report for
any intermediary test results for the same reason.

> 
> Thanks,
> Guenter
> 
> > 
> > Ran 11106 total tests in the following environments and test suites.
> > 
> > Environments
> > --------------
> > - dragonboard-410c - arm64
> > - hi6220-hikey - arm64
> > - juno-r2 - arm64
> > - qemu_arm
> > - qemu_arm64
> > - qemu_x86_64
> > - x15 - arm
> > - x86_64
> > 
> > Test Suites
> > -----------
> > * boot
> > * kselftest
> > * libhugetlbfs
> > * ltp-containers-tests
> > * ltp-fcntl-locktests-tests
> > * ltp-filecaps-tests
> > * ltp-fs-tests
> > * ltp-fs_bind-tests
> > * ltp-fs_perms_simple-tests
> > * ltp-fsx-tests
> > * ltp-hugetlb-tests
> > * ltp-io-tests
> > * ltp-ipc-tests
> > * ltp-math-tests
> > * ltp-nptl-tests
> > * ltp-pty-tests
> > * ltp-sched-tests
> > * ltp-securebits-tests
> > * ltp-syscalls-tests
> > * ltp-timers-tests
> > * ltp-cap_bounds-tests
> > * kselftest-vsyscall-mode-native
> > * kselftest-vsyscall-mode-none
> > 
> > -- 
> > Linaro LKFT
> > https://lkft.linaro.org

Re: [PATCH 4.14 000/165] 4.14.44-stable review

[Shuah Khan]

On 05/24/2018 03:36 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.44 release.
> There are 165 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat May 26 09:35:46 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.44-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.14 000/165] 4.14.44-stable review

[Greg Kroah-Hartman]

On Thu, May 24, 2018 at 07:50:08AM -0700, Nathan Chancellor wrote:
> On Thu, May 24, 2018 at 11:36:46AM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.44 release.
> > There are 165 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat May 26 09:35:46 UTC 2018.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.44-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Merged, compiled, and installed onto my Raspberry Pi 3.
> 
> No initial issues noticed in general usage or dmesg.

Thanks for testing 3 of these and letting me know.

greg k-h