[PATCH v2 1/9] ARM: shmobile: defconfig: Enable MTD command line partition parsing

[PATCH v2 1/9] ARM: shmobile: defconfig: Enable MTD command line partition parsing

[Marek Vasut]

In preparation for removing MTD partitioning from the DTs and moving
it over to kernel command line partition parsing, enable the support
for kernel command line MTD partition parsing.

The argument for not having MTD partitions in the DT is the same as
for not having hard drive partitions in DT, neither describes the
hardware itself, so it shouldn't be in the DT. Furthermore, kernel
command line MTD partition passing allows greater flexibility in
case someone decided to repartition the flash, which is well in the
realm of possibility with these systems.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: No change
---
 arch/arm/configs/shmobile_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index b49887e86a3d..4d0d5a00a188 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -64,6 +64,7 @@ CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
-- 
2.16.2

[PATCH v2 1/9] ARM: shmobile: defconfig: Enable MTD command line partition parsing

[Marek Vasut]

In preparation for removing MTD partitioning from the DTs and moving
it over to kernel command line partition parsing, enable the support
for kernel command line MTD partition parsing.

The argument for not having MTD partitions in the DT is the same as
for not having hard drive partitions in DT, neither describes the
hardware itself, so it shouldn't be in the DT. Furthermore, kernel
command line MTD partition passing allows greater flexibility in
case someone decided to repartition the flash, which is well in the
realm of possibility with these systems.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: No change
---
 arch/arm/configs/shmobile_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index b49887e86a3d..4d0d5a00a188 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -64,6 +64,7 @@ CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
-- 
2.16.2

[PATCH v2 1/9] ARM: shmobile: defconfig: Enable MTD command line partition parsing

[Marek Vasut]

In preparation for removing MTD partitioning from the DTs and moving
it over to kernel command line partition parsing, enable the support
for kernel command line MTD partition parsing.

The argument for not having MTD partitions in the DT is the same as
for not having hard drive partitions in DT, neither describes the
hardware itself, so it shouldn't be in the DT. Furthermore, kernel
command line MTD partition passing allows greater flexibility in
case someone decided to repartition the flash, which is well in the
realm of possibility with these systems.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc at vger.kernel.org
---
V2: No change
---
 arch/arm/configs/shmobile_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index b49887e86a3d..4d0d5a00a188 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -64,6 +64,7 @@ CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
-- 
2.16.2

[PATCH v2 2/9] ARM: dts: lager: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7790-lager.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 092610e3f953..7c95e62efd46 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -710,27 +710,6 @@
 		spi-cpha;
 		spi-cpol;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 2/9] ARM: dts: lager: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7790-lager.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 092610e3f953..7c95e62efd46 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -710,27 +710,6 @@
 		spi-cpha;
 		spi-cpol;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 2/9] ARM: dts: lager: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc at vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7790-lager.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 092610e3f953..7c95e62efd46 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -710,27 +710,6 @@
 		spi-cpha;
 		spi-cpol;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition at 40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition at 440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 3/9] ARM: dts: stout: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:512k(loader),256k(uboot),256k(uboot-env),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message
---
 arch/arm/boot/dts/r8a7790-stout.dts | 26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index a13a92c26645..dc65519d53ab 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -211,32 +211,6 @@
 		spi-cpha;
 		spi-cpol;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "uboot";
-				reg = <0x00080000 0x00040000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "uboot-env";
-				reg = <0x000c0000 0x00040000>;
-				read-only;
-			};
-			partition@100000 {
-				label = "flash";
-				reg = <0x00100000 0x03f00000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 3/9] ARM: dts: stout: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:512k(loader),256k(uboot),256k(uboot-env),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message
---
 arch/arm/boot/dts/r8a7790-stout.dts | 26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index a13a92c26645..dc65519d53ab 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -211,32 +211,6 @@
 		spi-cpha;
 		spi-cpol;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "uboot";
-				reg = <0x00080000 0x00040000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "uboot-env";
-				reg = <0x000c0000 0x00040000>;
-				read-only;
-			};
-			partition@100000 {
-				label = "flash";
-				reg = <0x00100000 0x03f00000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 3/9] ARM: dts: stout: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:512k(loader),256k(uboot),256k(uboot-env),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc at vger.kernel.org
---
V2: Drop the @0 anchor from the commit message
---
 arch/arm/boot/dts/r8a7790-stout.dts | 26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index a13a92c26645..dc65519d53ab 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -211,32 +211,6 @@
 		spi-cpha;
 		spi-cpol;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "loader";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-			partition at 80000 {
-				label = "uboot";
-				reg = <0x00080000 0x00040000>;
-				read-only;
-			};
-			partition at c0000 {
-				label = "uboot-env";
-				reg = <0x000c0000 0x00040000>;
-				read-only;
-			};
-			partition at 100000 {
-				label = "flash";
-				reg = <0x00100000 0x03f00000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 4/9] ARM: dts: koelsch: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:512k(loader),5632k(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 8ab793d8b2fd..406d5d29e29c 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -724,27 +724,6 @@
 		spi-cpha;
 		spi-cpol;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "user";
-				reg = <0x00080000 0x00580000>;
-				read-only;
-			};
-			partition@600000 {
-				label = "flash";
-				reg = <0x00600000 0x03a00000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 4/9] ARM: dts: koelsch: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:512k(loader),5632k(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 8ab793d8b2fd..406d5d29e29c 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -724,27 +724,6 @@
 		spi-cpha;
 		spi-cpol;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "user";
-				reg = <0x00080000 0x00580000>;
-				read-only;
-			};
-			partition@600000 {
-				label = "flash";
-				reg = <0x00600000 0x03a00000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 4/9] ARM: dts: koelsch: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:512k(loader),5632k(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc at vger.kernel.org
---
V2: Drop the @0 anchor from the commit message
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 8ab793d8b2fd..406d5d29e29c 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -724,27 +724,6 @@
 		spi-cpha;
 		spi-cpol;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "loader";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-			partition at 80000 {
-				label = "user";
-				reg = <0x00080000 0x00580000>;
-				read-only;
-			};
-			partition at 600000 {
-				label = "flash";
-				reg = <0x00600000 0x03a00000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 5/9] ARM: dts: porter: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader_prg),4m(user_prg),-(flash_fs)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7791-porter.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index a01101b49d99..45d89e064407 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -344,27 +344,6 @@
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader_prg";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user_prg";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash_fs";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 5/9] ARM: dts: porter: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader_prg),4m(user_prg),-(flash_fs)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7791-porter.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index a01101b49d99..45d89e064407 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -344,27 +344,6 @@
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader_prg";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user_prg";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash_fs";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 5/9] ARM: dts: porter: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader_prg),4m(user_prg),-(flash_fs)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc at vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7791-porter.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index a01101b49d99..45d89e064407 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -344,27 +344,6 @@
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "loader_prg";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition at 40000 {
-				label = "user_prg";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition at 440000 {
-				label = "flash_fs";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 6/9] ARM: dts: wheat: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7792-wheat.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
index db01de7a3811..93f78716225a 100644
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -217,27 +217,6 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 6/9] ARM: dts: wheat: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7792-wheat.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
index db01de7a3811..93f78716225a 100644
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -217,27 +217,6 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 6/9] ARM: dts: wheat: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc at vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7792-wheat.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
index db01de7a3811..93f78716225a 100644
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -217,27 +217,6 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition at 40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition at 440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 7/9] ARM: dts: gose: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7793-gose.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index aa209f6e5d71..b2dd54fbe40c 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -676,27 +676,6 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 7/9] ARM: dts: gose: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7793-gose.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index aa209f6e5d71..b2dd54fbe40c 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -676,27 +676,6 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 7/9] ARM: dts: gose: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc at vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7793-gose.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index aa209f6e5d71..b2dd54fbe40c 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -676,27 +676,6 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition at 40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition at 440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 8/9] ARM: dts: alt: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),256k(system),-(user)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message
---
 arch/arm/boot/dts/r8a7794-alt.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index e17027532941..1d044ed598f3 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -419,26 +419,5 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "system";
-				reg = <0x00040000 0x00040000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "user";
-				reg = <0x00080000 0x03f80000>;
-			};
-		};
 	};
 };
-- 
2.16.2

[PATCH v2 8/9] ARM: dts: alt: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),256k(system),-(user)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message
---
 arch/arm/boot/dts/r8a7794-alt.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index e17027532941..1d044ed598f3 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -419,26 +419,5 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "system";
-				reg = <0x00040000 0x00040000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "user";
-				reg = <0x00080000 0x03f80000>;
-			};
-		};
 	};
 };
-- 
2.16.2

[PATCH v2 8/9] ARM: dts: alt: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),256k(system),-(user)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc at vger.kernel.org
---
V2: Drop the @0 anchor from the commit message
---
 arch/arm/boot/dts/r8a7794-alt.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index e17027532941..1d044ed598f3 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -419,26 +419,5 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition at 40000 {
-				label = "system";
-				reg = <0x00040000 0x00040000>;
-				read-only;
-			};
-			partition at 80000 {
-				label = "user";
-				reg = <0x00080000 0x03f80000>;
-			};
-		};
 	};
 };
-- 
2.16.2

[PATCH v2 9/9] ARM: dts: silk: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7794-silk.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 7808aaee6644..b8163a0e2190 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -444,27 +444,6 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 9/9] ARM: dts: silk: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7794-silk.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 7808aaee6644..b8163a0e2190 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -444,27 +444,6 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2

[PATCH v2 9/9] ARM: dts: silk: Drop MTD partitioning from DT

[Marek Vasut]

Drop the MTD partitioning from DT, since it does not describe HW
and to give way to a more flexible kernel command line partition
passing.

To retain the original partitioning, assure you have enabled
CONFIG_MTD_CMDLINE_PARTS in your kernel config and add the
following to your kernel command line:

  mtdparts=spi0.0:256k(loader),4m(user),-(flash)

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc at vger.kernel.org
---
V2: Drop the @0 anchor from the commit message, use 4m
---
 arch/arm/boot/dts/r8a7794-silk.dts | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 7808aaee6644..b8163a0e2190 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -444,27 +444,6 @@
 		spi-cpol;
 		spi-cpha;
 		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition at 0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition at 40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition at 440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
 	};
 };
 
-- 
2.16.2