* [PATCH 0/2] arm: dts: salvator-x(s): increase I2C ch4 bus speed
@ 2018-05-25 11:05 Wolfram Sang
2018-05-25 11:05 ` [PATCH 1/2] arm64: dts: salvator-x: update I2C ch4 clock to 400kHz Wolfram Sang
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Wolfram Sang @ 2018-05-25 11:05 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: Simon Horman, Wolfram Sang
Patches taken from the BSP. I did some testing by accessing the chips manually.
I also checked the datasheets of the attached I2C clients which confirm this
step up.
Takeshi Kihara (2):
arm64: dts: salvator-x: Update I2C ch4 clock to 400kHz
arm64: dts: salvator-xs: Update I2C ch4 clock to 400kHz
arch/arm64/boot/dts/renesas/salvator-x.dtsi | 2 ++
arch/arm64/boot/dts/renesas/salvator-xs.dtsi | 2 ++
2 files changed, 4 insertions(+)
--
2.11.0
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH 1/2] arm64: dts: salvator-x: update I2C ch4 clock to 400kHz
2018-05-25 11:05 [PATCH 0/2] arm: dts: salvator-x(s): increase I2C ch4 bus speed Wolfram Sang
@ 2018-05-25 11:05 ` Wolfram Sang
2018-05-25 11:05 ` [PATCH 2/2] arm64: dts: salvator-xs: " Wolfram Sang
2018-05-28 9:27 ` [PATCH 0/2] arm: dts: salvator-x(s): increase I2C ch4 bus speed Simon Horman
2 siblings, 0 replies; 4+ messages in thread
From: Wolfram Sang @ 2018-05-25 11:05 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: Simon Horman, Takeshi Kihara, Wolfram Sang
From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Any of the following devices connected to I2C ch4 of the Salvator-X board
will operate at 400 kHz:
PCA9654, 9FGV0841, ADV7482WBBCZ, MAX9611, 5P49V5923
This patch updates the clock frequency to 400 KHz.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm64/boot/dts/renesas/salvator-x.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
index 468868c8ed9f..2828482eba1c 100644
--- a/arch/arm64/boot/dts/renesas/salvator-x.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
@@ -20,6 +20,8 @@
};
&i2c4 {
+ clock-frequency = <400000>;
+
versaclock5: clock-generator@6a {
compatible = "idt,5p49v5923";
reg = <0x6a>;
--
2.11.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/2] arm64: dts: salvator-xs: update I2C ch4 clock to 400kHz
2018-05-25 11:05 [PATCH 0/2] arm: dts: salvator-x(s): increase I2C ch4 bus speed Wolfram Sang
2018-05-25 11:05 ` [PATCH 1/2] arm64: dts: salvator-x: update I2C ch4 clock to 400kHz Wolfram Sang
@ 2018-05-25 11:05 ` Wolfram Sang
2018-05-28 9:27 ` [PATCH 0/2] arm: dts: salvator-x(s): increase I2C ch4 bus speed Simon Horman
2 siblings, 0 replies; 4+ messages in thread
From: Wolfram Sang @ 2018-05-25 11:05 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: Simon Horman, Takeshi Kihara, Wolfram Sang
From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Any of the following devices connected to I2C ch4 of the Salvator-XS
board will operate at 400 kHz:
PCA9654E, 9FGV0841, ADV7482WBBCZ, MAX9611, 5P49V6901A
This patch updates the clock frequency to 400 KHz.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm64/boot/dts/renesas/salvator-xs.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
index bf4d200fb546..1ac03b7564aa 100644
--- a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
@@ -20,6 +20,8 @@
};
&i2c4 {
+ clock-frequency = <400000>;
+
versaclock6: clock-generator@6a {
compatible = "idt,5p49v6901";
reg = <0x6a>;
--
2.11.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH 0/2] arm: dts: salvator-x(s): increase I2C ch4 bus speed
2018-05-25 11:05 [PATCH 0/2] arm: dts: salvator-x(s): increase I2C ch4 bus speed Wolfram Sang
2018-05-25 11:05 ` [PATCH 1/2] arm64: dts: salvator-x: update I2C ch4 clock to 400kHz Wolfram Sang
2018-05-25 11:05 ` [PATCH 2/2] arm64: dts: salvator-xs: " Wolfram Sang
@ 2018-05-28 9:27 ` Simon Horman
2 siblings, 0 replies; 4+ messages in thread
From: Simon Horman @ 2018-05-28 9:27 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-renesas-soc
On Fri, May 25, 2018 at 01:05:40PM +0200, Wolfram Sang wrote:
> Patches taken from the BSP. I did some testing by accessing the chips manually.
> I also checked the datasheets of the attached I2C clients which confirm this
> step up.
Hi Wolfram,
Given Olof Johansson's recent comments in ("Re: [GIT PULL] Renesas ARM64
Based SoC DT Updates for v4.18") please consider squashing this
series into a single patch and posting a v2.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-05-28 9:28 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-25 11:05 [PATCH 0/2] arm: dts: salvator-x(s): increase I2C ch4 bus speed Wolfram Sang
2018-05-25 11:05 ` [PATCH 1/2] arm64: dts: salvator-x: update I2C ch4 clock to 400kHz Wolfram Sang
2018-05-25 11:05 ` [PATCH 2/2] arm64: dts: salvator-xs: " Wolfram Sang
2018-05-28 9:27 ` [PATCH 0/2] arm: dts: salvator-x(s): increase I2C ch4 bus speed Simon Horman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.