From: Wen He <wen.he_1@nxp.com> To: vkoul@kernel.org, dmaengine@vger.kernel.org Cc: robh+dt@kernel.org, devicetree@vger.kernel.org, leoyang.li@nxp.com, jiafei.pan@nxp.com, jiaheng.fan@nxp.com, wen.he_1@nxp.com Subject: [v5,4/6] arm64: dts: ls1043a: add qdma device tree nodes Date: Fri, 25 May 2018 19:19:18 +0800 [thread overview] Message-ID: <20180525111920.24498-4-wen.he_1@nxp.com> (raw) add the qDMA device tree nodes for LS1043A devices. Signed-off-by: Wen He <wen.he_1@nxp.com> --- change in v5: - Replace dts node variable 'queues' to 'fsl,queues' that add vendor prefix change in v4: - no arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 1109f22..48f9165 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -673,6 +673,21 @@ dma-coherent; }; + qdma: dma-controller@8380000 { + compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8390000 0x0 0x10000>, /* Status regs */ + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", "qdma-queue"; + dma-channels = <8>; + fsl,queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + }; + msi1: msi-controller1@1571000 { compatible = "fsl,ls1043a-msi"; reg = <0x0 0x1571000 0x0 0x8>;
WARNING: multiple messages have this Message-ID (diff)
From: Wen He <wen.he_1@nxp.com> To: vkoul@kernel.org, dmaengine@vger.kernel.org Cc: robh+dt@kernel.org, devicetree@vger.kernel.org, leoyang.li@nxp.com, jiafei.pan@nxp.com, jiaheng.fan@nxp.com, wen.he_1@nxp.com Subject: [v5 4/6] arm64: dts: ls1043a: add qdma device tree nodes Date: Fri, 25 May 2018 19:19:18 +0800 [thread overview] Message-ID: <20180525111920.24498-4-wen.he_1@nxp.com> (raw) In-Reply-To: <20180525111920.24498-1-wen.he_1@nxp.com> add the qDMA device tree nodes for LS1043A devices. Signed-off-by: Wen He <wen.he_1@nxp.com> --- change in v5: - Replace dts node variable 'queues' to 'fsl,queues' that add vendor prefix change in v4: - no arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 1109f22..48f9165 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -673,6 +673,21 @@ dma-coherent; }; + qdma: dma-controller@8380000 { + compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8390000 0x0 0x10000>, /* Status regs */ + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", "qdma-queue"; + dma-channels = <8>; + fsl,queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + }; + msi1: msi-controller1@1571000 { compatible = "fsl,ls1043a-msi"; reg = <0x0 0x1571000 0x0 0x8>; -- 1.7.1
next reply other threads:[~2018-05-25 11:19 UTC|newest] Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-25 11:19 Wen He [this message] 2018-05-25 11:19 ` [v5 4/6] arm64: dts: ls1043a: add qdma device tree nodes Wen He -- strict thread matches above, loose matches on Subject: below -- 2018-06-14 7:26 [v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs Vinod Koul 2018-06-14 7:26 ` [v5 2/6] " Vinod 2018-06-14 2:15 [v5,2/6] " Wen He 2018-06-14 2:15 ` [v5 2/6] " Wen He 2018-06-12 16:32 [v5,2/6] " Li Yang 2018-06-12 16:32 ` [v5 2/6] " Li Yang 2018-06-12 4:00 [v5,2/6] " Vinod Koul 2018-06-12 4:00 ` [v5 2/6] " Vinod 2018-06-11 8:14 [v5,2/6] " Wen He 2018-06-11 8:14 ` [v5 2/6] " Wen He 2018-06-05 17:24 [v5,2/6] " Li Yang 2018-06-05 17:24 ` [v5 2/6] " Li Yang 2018-06-05 16:30 [v5,2/6] " Vinod Koul 2018-06-05 16:30 ` [v5 2/6] " Vinod 2018-06-05 16:28 [v5,2/6] " Vinod Koul 2018-06-05 16:28 ` [v5 2/6] " Vinod 2018-06-04 9:53 [v5,2/6] " Wen He 2018-06-04 9:53 ` [v5 2/6] " Wen He 2018-05-31 1:58 [v5,2/6] " Wen He 2018-05-31 1:58 ` [v5 2/6] " Wen He 2018-05-31 0:49 [v5,3/6] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings Rob Herring 2018-05-31 0:49 ` [v5 3/6] " Rob Herring 2018-05-30 18:51 [v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs Li Yang 2018-05-30 18:51 ` [v5 2/6] " Li Yang 2018-05-30 10:27 [v5,2/6] " Vinod Koul 2018-05-30 10:27 ` [v5 2/6] " Vinod Koul 2018-05-29 10:38 [v5,2/6] " Wen He 2018-05-29 10:38 ` [v5 2/6] " Wen He 2018-05-29 10:22 [v5,1/6] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT Wen He 2018-05-29 10:22 ` [v5 1/6] " Wen He 2018-05-29 10:21 [v5,1/6] " Vinod Koul 2018-05-29 10:21 ` [v5 1/6] " Vinod 2018-05-29 10:19 [v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs Vinod Koul 2018-05-29 10:19 ` [v5 2/6] " Vinod 2018-05-29 10:14 [v5,1/6] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT Wen He 2018-05-29 10:14 ` [v5 1/6] " Wen He 2018-05-29 9:59 [v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs Wen He 2018-05-29 9:59 ` [v5 2/6] " Wen He 2018-05-29 7:07 [v5,2/6] " Vinod Koul 2018-05-29 7:07 ` [v5 2/6] " Vinod 2018-05-29 4:49 [v5,1/6] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT Vinod Koul 2018-05-29 4:49 ` [v5 1/6] " Vinod 2018-05-25 11:19 [v5,6/6] arm: dts: ls1021a: add qdma device tree nodes Wen He 2018-05-25 11:19 ` [v5 6/6] " Wen He 2018-05-25 11:19 [v5,5/6] arm64: dts: ls1046a: " Wen He 2018-05-25 11:19 ` [v5 5/6] " Wen He 2018-05-25 11:19 [v5,3/6] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings Wen He 2018-05-25 11:19 ` [v5 3/6] " Wen He 2018-05-25 11:19 [v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs Wen He 2018-05-25 11:19 ` [v5 2/6] " Wen He 2018-05-25 11:19 [v5,1/6] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT Wen He 2018-05-25 11:19 ` [v5 1/6] " Wen He
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180525111920.24498-4-wen.he_1@nxp.com \ --to=wen.he_1@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=dmaengine@vger.kernel.org \ --cc=jiafei.pan@nxp.com \ --cc=jiaheng.fan@nxp.com \ --cc=leoyang.li@nxp.com \ --cc=robh+dt@kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.