* [GIT PULL 1/5] i.MX drivers updates for 4.18
@ 2018-05-20 14:57 Shawn Guo
2018-05-20 14:57 ` [GIT PULL 2/5] i.MX SoC changes " Shawn Guo
` (4 more replies)
0 siblings, 5 replies; 10+ messages in thread
From: Shawn Guo @ 2018-05-20 14:57 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-drivers-4.18
for you to fetch changes up to f54e714cfc53b9164d1206f9ee49042195532a51:
soc: imx: gpc: Do not pass static memory as platform data (2018-04-23 17:03:15 +0800)
----------------------------------------------------------------
i.MX drivers update for 4.18:
- Use platform_device_add_data() instead of a pointer to a static
memory in gpc/gpcv2 driver for platform data passing, so that we
can avoid a BUG() when calling platform_device_put().
----------------------------------------------------------------
Andrey Smirnov (2):
soc: imx: gpcv2: Do not pass static memory as platform data
soc: imx: gpc: Do not pass static memory as platform data
drivers/soc/imx/gpc.c | 18 +++++++++++++-----
drivers/soc/imx/gpcv2.c | 22 +++++++++++++++-------
2 files changed, 28 insertions(+), 12 deletions(-)
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 2/5] i.MX SoC changes for 4.18
2018-05-20 14:57 [GIT PULL 1/5] i.MX drivers updates for 4.18 Shawn Guo
@ 2018-05-20 14:57 ` Shawn Guo
2018-05-25 20:47 ` Olof Johansson
2018-05-20 14:57 ` [GIT PULL 3/5] i.MX device tree updates " Shawn Guo
` (3 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Shawn Guo @ 2018-05-20 14:57 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-4.18
for you to fetch changes up to 0e8d1c4b7613399494720e315f99d21793cacb8c:
ARM: imx: select imx6sll pinctrl when imx6sll enabled (2018-05-02 15:01:32 +0800)
----------------------------------------------------------------
i.MX SoC update for 4.18:
- A series from Bartosz to convert all i.MX plaform code using
at24_platform_data to use at24 eeprom generic device properties.
- Enable pinctrl driver support for i.MX6SLL SoC.
- Clean up i.MX platform code using spi_imx platform data on outdated
documentation and chip select array usage.
----------------------------------------------------------------
Bai Ping (1):
ARM: imx: select imx6sll pinctrl when imx6sll enabled
Bartosz Golaszewski (4):
ARM: imx: vpr200: drop at24_platform_data
ARM: imx: pcm043: use device properties for at24 eeprom
ARM: imx: pca100: use device properties for at24 eeprom
ARM: imx: pcm037: use device properties for at24 eeprom
Trent Piepho (1):
ARM: imx: Update spi_imx platform data to reflect current state
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/mach-mx31_3ds.c | 18 ++----------------
arch/arm/mach-imx/mach-mx31lilly.c | 12 ++----------
arch/arm/mach-imx/mach-mx31lite.c | 16 ++--------------
arch/arm/mach-imx/mach-mx31moboard.c | 17 +++--------------
arch/arm/mach-imx/mach-pca100.c | 13 ++++++-------
arch/arm/mach-imx/mach-pcm037.c | 13 ++++++-------
arch/arm/mach-imx/mach-pcm037_eet.c | 5 +----
arch/arm/mach-imx/mach-pcm043.c | 13 ++++++-------
arch/arm/mach-imx/mach-vpr200.c | 9 +--------
include/linux/platform_data/spi-imx.h | 29 +++++++++++++++++------------
11 files changed, 47 insertions(+), 99 deletions(-)
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 3/5] i.MX device tree updates for 4.18
2018-05-20 14:57 [GIT PULL 1/5] i.MX drivers updates for 4.18 Shawn Guo
2018-05-20 14:57 ` [GIT PULL 2/5] i.MX SoC changes " Shawn Guo
@ 2018-05-20 14:57 ` Shawn Guo
2018-05-25 20:53 ` Olof Johansson
2018-05-20 14:58 ` [GIT PULL 4/5] Freescale arm64 " Shawn Guo
` (2 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Shawn Guo @ 2018-05-20 14:57 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.18
for you to fetch changes up to 204d9e32b7971ecd187068c3a40c48bac4656cb0:
ARM: dts: imx28/imx53: enable edt-ft5x06 wakeup source (2018-05-20 21:04:59 +0800)
----------------------------------------------------------------
i.MX device tree update for 4.18:
- New boards support: BTicino i.MX6DL Mamoj board, DHCOM iMX6 SoM and
PDK2 board, Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit,
Kieback & Peter GmbH iMX6Q TPC board.
- A series from Anson Huang to add a bunch of devices for i.MX6SX
SabreAuto board, PMIC, IO expanders, FEC, Watchdog, LED and Touch.
- Update i.MX7D for cpufreq support, using operating-points-v2
bindings, correcting cpu supply name for voltage scaling.
- Clean up unneeded 'codec-handle' property from imx25-pdk and
imx53-tx53 device tree.
- Switch SoC dtsi and NXP board dts files to use SPDX identifier.
- Remove unnecessary '#address-cells/#size-cells' to fix DTC warning
avoid_unnecessary_addr_size seen with W=1 switch.
- A series from Rob Herring to fix DTC warning graph_endpoint seen with
IPU OF graph when W=1 switch is on.
- Update a few boards to use symbol name instead of hard-coding the
input codes.
- Update a number of boards to use IRQ_TYPE specifier instead of the
raw value.
- A few updates for i.MX6 RDU2 board: bumping SoC/PU operating points,
adding assigned clocks for GPU, and enabling eGalax touchscreen.
- A couple of i.MX51 RDU1 updates: limiting usbh1 to full-speed, and
cleaning up eMMC device node.
- Convert Hummingboard audio bindings from imx-audio-sgtl5000 to
simple-audio-card, so that auxiliary audio devices such as external
amplifiers can be supported.
- Replace underscore with hyphen in aliases name to fix DTC warning
alias_paths with W=1 switch.
- A couple of updates on i.MX7D SAI and i.MX6ULL UART5 pin defines.
- Other random and small changes.
----------------------------------------------------------------
Anson Huang (13):
ARM: dts: imx7d-sdb: add gpio key support
ARM: dts: imx7s: add anatop vdd1p2 regulator
ARM: dts: imx6sx-sabreauto: add external 24MHz clock source
ARM: dts: imx6sx-sabreauto: add PMIC support
ARM: dts: imx6sx-sabreauto: add max7322 IO expander support
ARM: dts: imx6sx-sabreauto: add IO expander max7310 support
ARM: dts: imx6sx-sabreauto: add fec support
ARM: dts: imx6sx-sabreauto: add wdog external reset
ARM: dts: imx6sx-sabreauto: add debug LED support
ARM: dts: imx6sx-sabreauto: add egalax touch screen support
ARM: dts: imx7d: correct cpu supply name for voltage scaling
ARM: dts: imx7s-warp: remove unnecessary cpu regulator supply
ARM: dts: imx7d: use operating-points-v2 for cpu
Daniel Mack (1):
ARM: dts: imx28/imx53: enable edt-ft5x06 wakeup source
Fabio Estevam (26):
ARM: dts: imx25-pdk: Remove unneeded 'codec-handle' property
ARM: dts: imx53-tx53: Remove unneeded 'codec-handle' property
ARM: dts: imx6qdl-wandboard: Let the codec control MCLK pinctrl
ARM: dts: imx7: Move tempmon node out of bus
ARM: dts: imx6qdl-tx6: Remove 'bus-format-override' property
ARM: dts: imx6ul: Add CAAM support
ARM: dts: imx6qdl: Remove #address/#size-cells from mipi_dsi
ARM: dts: imx: Remove #address/#size-cells from switch nodes
ARM: dts: imx: Remove #address/#size-cells from stmpe nodes
ARM: dts: imx6qdl-sabre: Remove #address/#size-cells from camera port nodes
ARM: dts: imx53-ppd: Remove unnecessary #address/#size-cells
ARM: dts: imx6dl-aristainetos2_4: Remove #address/#size-cells from display0
ARM: dts: imx6q-b850v3: Remove #address/#size-cells from stdp2690
ARM: dts: imx6q-utilite-pro: Remove #address/#size-cells from encoder
ARM: dts: imx6q-var-dt6customboard: Remove #address/#size-cells from gpio-keys
ARM: dts: imx6q-pistachio: Use 'uart-has-rtscts' property
ARM: dts: imx6qdl-wandboard: Switch to SPDX identifier
ARM: dts: imx6qdl-udoo: Switch to SPDX identifier
ARM: dts: imx28-cfa10049: Remove unnecessary #address/#size-cells
ARM: dts: imx28-duckbill-2-enocean: Remove unnecessary #address/#size-cells
ARM: dts: imx: Switch to SPDX identifier
ARM: dts: imx53-ard: Do not hardcode input codes
ARM: dts: imx53-smd: Do not hardcode input codes
ARM: dts: imx6q-gk802: Do not hardcode input codes
ARM: dts: imx: Switch NXP boards to SPDX identifier
ARM: dts: imx6/7: Remove unit-address from anatop regulators
Greg Ungerer (1):
ARM: dts: imx6ull: add UART5 input select register definitions
Hern?n Gonzalez (4):
ARM: dts: vf-colibri-eval-v3: Use IRQ_TYPE specifier
ARM: dts: imx53-qsb: Use IRQ_TYPE specifier
ARM: dts: imx53-voipac-dmm-668: Use IRQ_TYPE specifier
ARM: dts: imx6qdl-phytec-pfla02: Use IRQ_TYPE specifier
Jagan Teki (4):
dt-bindings: Add vendor prefix for Bticino
ARM: dts: i.MX6: Add BTicino i.MX6DL Mamoj initial support
ARM: dts: imx6q-icore-ofcap12: Switch LVDS timings from panel-simple
ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support
Ken Lin (1):
ARM: dts: imx: ba16: add "mfg" Q7 SPI-NOR partition
Lucas Stach (3):
ARM: dts: imx6: RDU2: bump SoC/PU operating points by 25mV
ARM: dts: imx6: RDU2+: add assigned clocks for GPU 3D
ARM: dts: imx6: RDU2: add eGalax touchscreen
Lukasz Majewski (1):
ARM: dts: tpc: Device tree description of the iMX6Q TPC board
Marek Vasut (1):
ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2
Matt Porter (1):
ARM: dts: hummingboard: convert onboard audio to simple-audio-card
Nikita Yushchenko (3):
ARM: dts: imx51-zii-rdu1: limit usbh1 to full-speed
ARM: dts: vf610-zii-dev: enable vf610 builtin temp sensor
ARM: dts: imx51-zii-rdu1: cleanup eMMC node
Rob Herring (3):
ARM: dts: imx: fix IPU OF graph endpoint node names
ARM: dts: imx53: Fix LDB OF graph warning
ARM: dts: imx7: Fix error in coresight TPIU graph connection
Sebastian Reichel (1):
ARM: dts: imx53-ppd: Use IRQ_TYPE_* constants
Shawn Guo (7):
ARM: dts: imx6sx-sabreauto: drop 'regulators' container node
ARM: dts: imx6sx-sabreauto: drop board specific pinctrl container node
ARM: dts: imx: drop unnecessary #address-cells/#size-cells
ARM: dts: imx1: move clk32 clock into soc dtsi
ARM: dts: imx27: use label to override osc26m clock setting
ARM: dts: imx: drop 'clocks' container for board level clocks
ARM: dts: imx: replace underscore with hyphen in aliases name
Shengjiu Wang (1):
ARM: dts: imx7d-pinfunc: update sai select input value
Stefan Wahren (1):
ARM: dts: imx6ull: add UART5 RTS input select register
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/imx1-ads.dts | 11 -
arch/arm/boot/dts/imx1.dtsi | 21 +-
arch/arm/boot/dts/imx23-evk.dts | 13 +-
arch/arm/boot/dts/imx23.dtsi | 13 +-
arch/arm/boot/dts/imx25-pdk.dts | 14 +-
arch/arm/boot/dts/imx25.dtsi | 16 +-
arch/arm/boot/dts/imx27-apf27.dts | 13 +-
arch/arm/boot/dts/imx27-pdk.dts | 13 +-
arch/arm/boot/dts/imx27.dtsi | 18 +-
arch/arm/boot/dts/imx28-cfa10049.dts | 2 -
arch/arm/boot/dts/imx28-duckbill-2-enocean.dts | 2 -
arch/arm/boot/dts/imx28-evk.dts | 13 +-
arch/arm/boot/dts/imx28-tx28.dts | 14 +-
arch/arm/boot/dts/imx28.dtsi | 13 +-
arch/arm/boot/dts/imx31.dtsi | 13 +-
arch/arm/boot/dts/imx35-pdk.dts | 15 +-
arch/arm/boot/dts/imx35.dtsi | 14 +-
arch/arm/boot/dts/imx50-evk.dts | 17 +-
arch/arm/boot/dts/imx50.dtsi | 3 -
arch/arm/boot/dts/imx51-babbage.dts | 15 +-
arch/arm/boot/dts/imx51-zii-rdu1.dts | 6 +-
arch/arm/boot/dts/imx51.dtsi | 18 +-
arch/arm/boot/dts/imx53-ard.dts | 11 +-
arch/arm/boot/dts/imx53-m53.dtsi | 2 -
arch/arm/boot/dts/imx53-ppd.dts | 12 +-
arch/arm/boot/dts/imx53-qsb-common.dtsi | 15 +-
arch/arm/boot/dts/imx53-qsb.dts | 17 +-
arch/arm/boot/dts/imx53-qsrb.dts | 15 +-
arch/arm/boot/dts/imx53-smd.dts | 20 +-
arch/arm/boot/dts/imx53-tx53-x03x.dts | 1 +
arch/arm/boot/dts/imx53-tx53.dtsi | 14 +-
arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi | 2 +-
arch/arm/boot/dts/imx53.dtsi | 11 +-
arch/arm/boot/dts/imx6dl-aristainetos2_4.dts | 2 -
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 15 +-
arch/arm/boot/dts/imx6dl-mamoj.dts | 224 ++++++++++
arch/arm/boot/dts/imx6dl-sabreauto.dts | 10 +-
arch/arm/boot/dts/imx6dl-sabresd.dts | 10 +-
arch/arm/boot/dts/imx6dl-udoo.dts | 6 +-
arch/arm/boot/dts/imx6dl-wandboard-revb1.dts | 6 +-
arch/arm/boot/dts/imx6dl-wandboard-revd1.dts | 6 +-
arch/arm/boot/dts/imx6dl-wandboard.dts | 6 +-
arch/arm/boot/dts/imx6dl.dtsi | 12 +-
arch/arm/boot/dts/imx6q-b850v3.dts | 4 -
arch/arm/boot/dts/imx6q-ba16.dtsi | 7 +-
arch/arm/boot/dts/imx6q-bx50v3.dtsi | 13 +-
arch/arm/boot/dts/imx6q-dhcom-pdk2.dts | 151 +++++++
arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 476 +++++++++++++++++++++
arch/arm/boot/dts/imx6q-gk802.dts | 3 +-
arch/arm/boot/dts/imx6q-icore-mipi.dts | 25 ++
arch/arm/boot/dts/imx6q-icore-ofcap12.dts | 31 +-
arch/arm/boot/dts/imx6q-kp-tpc.dts | 22 +
arch/arm/boot/dts/imx6q-kp.dtsi | 432 +++++++++++++++++++
arch/arm/boot/dts/imx6q-novena.dts | 2 -
arch/arm/boot/dts/imx6q-pistachio.dts | 2 +-
arch/arm/boot/dts/imx6q-sabreauto.dts | 15 +-
arch/arm/boot/dts/imx6q-sabresd.dts | 15 +-
arch/arm/boot/dts/imx6q-udoo.dts | 6 +-
arch/arm/boot/dts/imx6q-utilite-pro.dts | 2 -
arch/arm/boot/dts/imx6q-var-dt6customboard.dts | 2 -
arch/arm/boot/dts/imx6q-wandboard-revb1.dts | 6 +-
arch/arm/boot/dts/imx6q-wandboard-revd1.dts | 6 +-
arch/arm/boot/dts/imx6q-wandboard.dts | 6 +-
arch/arm/boot/dts/imx6q.dtsi | 39 +-
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 2 -
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 2 -
arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 2 -
arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 52 ++-
arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 47 +-
arch/arm/boot/dts/imx6qdl-icore.dtsi | 25 +-
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 15 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 3 -
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 18 +-
arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi | 1 -
arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi | 3 -
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 6 +-
arch/arm/boot/dts/imx6qdl-udoo.dtsi | 6 +-
arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi | 1 -
arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi | 1 -
arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi | 1 -
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 14 +-
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 24 +-
arch/arm/boot/dts/imx6qdl.dtsi | 70 ++-
arch/arm/boot/dts/imx6qp-sabreauto.dts | 44 +-
arch/arm/boot/dts/imx6qp-sabresd.dts | 44 +-
arch/arm/boot/dts/imx6qp-wandboard-revd1.dts | 6 +-
arch/arm/boot/dts/imx6qp-zii-rdu2.dts | 5 +
arch/arm/boot/dts/imx6qp.dtsi | 44 +-
arch/arm/boot/dts/imx6sl-evk.dts | 10 +-
arch/arm/boot/dts/imx6sl.dtsi | 34 +-
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 4 +-
arch/arm/boot/dts/imx6sx-sabreauto.dts | 427 ++++++++++++++----
arch/arm/boot/dts/imx6sx.dtsi | 101 ++---
arch/arm/boot/dts/imx6ul-14x14-evk.dts | 10 +-
arch/arm/boot/dts/imx6ul-isiot.dtsi | 2 -
arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts | 2 +-
arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 6 +-
arch/arm/boot/dts/imx6ul.dtsi | 51 ++-
arch/arm/boot/dts/imx6ull-pinfunc.h | 9 +
arch/arm/boot/dts/imx6ull.dtsi | 2 +
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 2 +-
arch/arm/boot/dts/imx7d-nitrogen7.dts | 6 +-
arch/arm/boot/dts/imx7d-pinfunc.h | 6 +-
arch/arm/boot/dts/imx7d-sdb-sht11.dts | 44 +-
arch/arm/boot/dts/imx7d-sdb.dts | 70 ++-
arch/arm/boot/dts/imx7d.dtsi | 71 ++-
arch/arm/boot/dts/imx7s-warp.dts | 4 -
arch/arm/boot/dts/imx7s.dtsi | 88 ++--
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +-
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 6 -
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 4 -
arch/arm/boot/dts/vf610-zii-dev.dtsi | 4 +
arch/arm/boot/dts/vfxxx.dtsi | 2 +-
116 files changed, 2285 insertions(+), 1084 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-mamoj.dts
create mode 100644 arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
create mode 100644 arch/arm/boot/dts/imx6q-dhcom-som.dtsi
create mode 100644 arch/arm/boot/dts/imx6q-icore-mipi.dts
create mode 100644 arch/arm/boot/dts/imx6q-kp-tpc.dts
create mode 100644 arch/arm/boot/dts/imx6q-kp.dtsi
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 4/5] Freescale arm64 device tree updates for 4.18
2018-05-20 14:57 [GIT PULL 1/5] i.MX drivers updates for 4.18 Shawn Guo
2018-05-20 14:57 ` [GIT PULL 2/5] i.MX SoC changes " Shawn Guo
2018-05-20 14:57 ` [GIT PULL 3/5] i.MX device tree updates " Shawn Guo
@ 2018-05-20 14:58 ` Shawn Guo
2018-05-25 20:53 ` Olof Johansson
2018-05-20 14:58 ` [GIT PULL 5/5] i.MX defconfig " Shawn Guo
2018-05-25 20:47 ` [GIT PULL 1/5] i.MX drivers " Olof Johansson
4 siblings, 1 reply; 10+ messages in thread
From: Shawn Guo @ 2018-05-20 14:58 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-4.18
for you to fetch changes up to 70ce60431e45ace2a1198d4cf339beaef1de9f8b:
arm64: dts: fsl-ls1012a: Fix DTC aliases warnings (2018-05-15 14:43:58 +0800)
----------------------------------------------------------------
Freescale arm64 device tree update for 4.18:
- Add unit address for ls208xa-rdb SPI flash node matching 'reg'
property to fix DTC warning unit_address_vs_reg.
- Use hypen instead of underscore in aliases name for fsl-ls1012a to
fix DTC warning alias_paths.
----------------------------------------------------------------
Fabio Estevam (2):
arm64: dts: ls208xa-rdb: Pass unit name to SPI flash node
arm64: dts: fsl-ls1012a: Fix DTC aliases warnings
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 10 +++++-----
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 +-
2 files changed, 6 insertions(+), 6 deletions(-)
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 5/5] i.MX defconfig updates for 4.18
2018-05-20 14:57 [GIT PULL 1/5] i.MX drivers updates for 4.18 Shawn Guo
` (2 preceding siblings ...)
2018-05-20 14:58 ` [GIT PULL 4/5] Freescale arm64 " Shawn Guo
@ 2018-05-20 14:58 ` Shawn Guo
2018-05-25 20:54 ` Olof Johansson
2018-05-25 20:47 ` [GIT PULL 1/5] i.MX drivers " Olof Johansson
4 siblings, 1 reply; 10+ messages in thread
From: Shawn Guo @ 2018-05-20 14:58 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-4.18
for you to fetch changes up to 1049167999fc9a078c5914db9f341a275c2376cb:
ARM: imx_v6_v7_defconfig: Select CONFIG_GPIO_MAX732X by default (2018-05-04 17:03:20 +0800)
----------------------------------------------------------------
i.MX defconfig update for 4.18:
- Enable i.MX6SLL SoC support.
- Build in GPIO_MAX732X support as the GPIO expanders are used on
i.MX6 SabreAuto boards.
- Enable driver for RN5T618 PMIC and Marvell MWIFIEX support which
are found on i.MX6/7 Colibri boards.
- Build in OCOTP NVMEM driver for Vybrid (vf610) SoCs.
----------------------------------------------------------------
Anson Huang (1):
ARM: imx_v6_v7_defconfig: Select CONFIG_GPIO_MAX732X by default
Bai Ping (1):
ARM: imx_v6_v7_defconfig: enable imx6sll by default
Stefan Agner (3):
ARM: imx_v6_v7_defconfig: add RN5T618 PMIC family support
ARM: imx_v6_v7_defconfig: add mwifiex driver
ARM: imx_v6_v7_defconfig: enable Vybrid OCOTP driver
arch/arm/configs/imx_v6_v7_defconfig | 9 +++++++++
1 file changed, 9 insertions(+)
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 1/5] i.MX drivers updates for 4.18
2018-05-20 14:57 [GIT PULL 1/5] i.MX drivers updates for 4.18 Shawn Guo
` (3 preceding siblings ...)
2018-05-20 14:58 ` [GIT PULL 5/5] i.MX defconfig " Shawn Guo
@ 2018-05-25 20:47 ` Olof Johansson
4 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2018-05-25 20:47 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, May 20, 2018 at 10:57:57PM +0800, Shawn Guo wrote:
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-drivers-4.18
>
> for you to fetch changes up to f54e714cfc53b9164d1206f9ee49042195532a51:
>
> soc: imx: gpc: Do not pass static memory as platform data (2018-04-23 17:03:15 +0800)
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 2/5] i.MX SoC changes for 4.18
2018-05-20 14:57 ` [GIT PULL 2/5] i.MX SoC changes " Shawn Guo
@ 2018-05-25 20:47 ` Olof Johansson
0 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2018-05-25 20:47 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, May 20, 2018 at 10:57:58PM +0800, Shawn Guo wrote:
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-4.18
>
> for you to fetch changes up to 0e8d1c4b7613399494720e315f99d21793cacb8c:
>
> ARM: imx: select imx6sll pinctrl when imx6sll enabled (2018-05-02 15:01:32 +0800)
>
> ----------------------------------------------------------------
> i.MX SoC update for 4.18:
> - A series from Bartosz to convert all i.MX plaform code using
> at24_platform_data to use at24 eeprom generic device properties.
> - Enable pinctrl driver support for i.MX6SLL SoC.
> - Clean up i.MX platform code using spi_imx platform data on outdated
> documentation and chip select array usage.
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 3/5] i.MX device tree updates for 4.18
2018-05-20 14:57 ` [GIT PULL 3/5] i.MX device tree updates " Shawn Guo
@ 2018-05-25 20:53 ` Olof Johansson
0 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2018-05-25 20:53 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, May 20, 2018 at 10:57:59PM +0800, Shawn Guo wrote:
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.18
>
> for you to fetch changes up to 204d9e32b7971ecd187068c3a40c48bac4656cb0:
>
> ARM: dts: imx28/imx53: enable edt-ft5x06 wakeup source (2018-05-20 21:04:59 +0800)
>
> ----------------------------------------------------------------
> i.MX device tree update for 4.18:
> - New boards support: BTicino i.MX6DL Mamoj board, DHCOM iMX6 SoM and
> PDK2 board, Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit,
> Kieback & Peter GmbH iMX6Q TPC board.
> - A series from Anson Huang to add a bunch of devices for i.MX6SX
> SabreAuto board, PMIC, IO expanders, FEC, Watchdog, LED and Touch.
> - Update i.MX7D for cpufreq support, using operating-points-v2
> bindings, correcting cpu supply name for voltage scaling.
> - Clean up unneeded 'codec-handle' property from imx25-pdk and
> imx53-tx53 device tree.
> - Switch SoC dtsi and NXP board dts files to use SPDX identifier.
> - Remove unnecessary '#address-cells/#size-cells' to fix DTC warning
> avoid_unnecessary_addr_size seen with W=1 switch.
> - A series from Rob Herring to fix DTC warning graph_endpoint seen with
> IPU OF graph when W=1 switch is on.
> - Update a few boards to use symbol name instead of hard-coding the
> input codes.
> - Update a number of boards to use IRQ_TYPE specifier instead of the
> raw value.
> - A few updates for i.MX6 RDU2 board: bumping SoC/PU operating points,
> adding assigned clocks for GPU, and enabling eGalax touchscreen.
> - A couple of i.MX51 RDU1 updates: limiting usbh1 to full-speed, and
> cleaning up eMMC device node.
> - Convert Hummingboard audio bindings from imx-audio-sgtl5000 to
> simple-audio-card, so that auxiliary audio devices such as external
> amplifiers can be supported.
> - Replace underscore with hyphen in aliases name to fix DTC warning
> alias_paths with W=1 switch.
> - A couple of updates on i.MX7D SAI and i.MX6ULL UART5 pin defines.
> - Other random and small changes.
Nice! Merged now, thanks.
-Olof
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 4/5] Freescale arm64 device tree updates for 4.18
2018-05-20 14:58 ` [GIT PULL 4/5] Freescale arm64 " Shawn Guo
@ 2018-05-25 20:53 ` Olof Johansson
0 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2018-05-25 20:53 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, May 20, 2018 at 10:58:00PM +0800, Shawn Guo wrote:
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-4.18
>
> for you to fetch changes up to 70ce60431e45ace2a1198d4cf339beaef1de9f8b:
>
> arm64: dts: fsl-ls1012a: Fix DTC aliases warnings (2018-05-15 14:43:58 +0800)
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 5/5] i.MX defconfig updates for 4.18
2018-05-20 14:58 ` [GIT PULL 5/5] i.MX defconfig " Shawn Guo
@ 2018-05-25 20:54 ` Olof Johansson
0 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2018-05-25 20:54 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, May 20, 2018 at 10:58:01PM +0800, Shawn Guo wrote:
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-4.18
>
> for you to fetch changes up to 1049167999fc9a078c5914db9f341a275c2376cb:
>
> ARM: imx_v6_v7_defconfig: Select CONFIG_GPIO_MAX732X by default (2018-05-04 17:03:20 +0800)
>
> ----------------------------------------------------------------
> i.MX defconfig update for 4.18:
> - Enable i.MX6SLL SoC support.
> - Build in GPIO_MAX732X support as the GPIO expanders are used on
> i.MX6 SabreAuto boards.
> - Enable driver for RN5T618 PMIC and Marvell MWIFIEX support which
> are found on i.MX6/7 Colibri boards.
> - Build in OCOTP NVMEM driver for Vybrid (vf610) SoCs.
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2018-05-25 20:54 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-20 14:57 [GIT PULL 1/5] i.MX drivers updates for 4.18 Shawn Guo
2018-05-20 14:57 ` [GIT PULL 2/5] i.MX SoC changes " Shawn Guo
2018-05-25 20:47 ` Olof Johansson
2018-05-20 14:57 ` [GIT PULL 3/5] i.MX device tree updates " Shawn Guo
2018-05-25 20:53 ` Olof Johansson
2018-05-20 14:58 ` [GIT PULL 4/5] Freescale arm64 " Shawn Guo
2018-05-25 20:53 ` Olof Johansson
2018-05-20 14:58 ` [GIT PULL 5/5] i.MX defconfig " Shawn Guo
2018-05-25 20:54 ` Olof Johansson
2018-05-25 20:47 ` [GIT PULL 1/5] i.MX drivers " Olof Johansson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.