From: "Clément Péron" <peron.clem@gmail.com> To: Colin Didier <colin.didier@devialet.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: "Daniel Lezcano" <daniel.lezcano@linaro.org>, "Thomas Gleixner" <tglx@linutronix.de>, "Fabio Estevam" <fabio.estevam@nxp.com>, "Vladimir Zapolskiy" <vladimir_zapolskiy@mentor.com>, "Sascha Hauer" <s.hauer@pengutronix.de>, "Rob Herring" <robh@kernel.org>, "NXP Linux Team" <linux-imx@nxp.com>, "Pengutronix Kernel Team" <kernel@pengutronix.de>, "Clément Peron" <clement.peron@devialet.com> Subject: [PATCH v4 5/5] ARM: dts: imx6qdl: add missing compatible and clock properties for EPIT Date: Wed, 30 May 2018 14:03:27 +0200 [thread overview] Message-ID: <20180530120327.27681-6-peron.clem@gmail.com> (raw) In-Reply-To: <20180530120327.27681-1-peron.clem@gmail.com> From: Colin Didier <colin.didier@devialet.com> Add missing compatible and clock properties for EPIT node. Signed-off-by: Colin Didier <colin.didier@devialet.com> Signed-off-by: Clément Peron <clement.peron@devialet.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> --- arch/arm/boot/dts/imx6qdl.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index c003e62bf290..0feec516847a 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -844,13 +844,23 @@ }; epit1: epit@20d0000 { /* EPIT1 */ + compatible = "fsl,imx6q-epit", "fsl,imx31-epit"; reg = <0x020d0000 0x4000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_IPG_PER>, + <&clks IMX6QDL_CLK_EPIT1>; + clock-names = "ipg", "per"; + status = "disabled"; }; epit2: epit@20d4000 { /* EPIT2 */ + compatible = "fsl,imx6q-epit", "fsl,imx31-epit"; reg = <0x020d4000 0x4000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_IPG_PER>, + <&clks IMX6QDL_CLK_EPIT2>; + clock-names = "ipg", "per"; + status = "disabled"; }; src: src@20d8000 { -- 2.17.0
WARNING: multiple messages have this Message-ID (diff)
From: peron.clem@gmail.com (Clément Péron) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 5/5] ARM: dts: imx6qdl: add missing compatible and clock properties for EPIT Date: Wed, 30 May 2018 14:03:27 +0200 [thread overview] Message-ID: <20180530120327.27681-6-peron.clem@gmail.com> (raw) In-Reply-To: <20180530120327.27681-1-peron.clem@gmail.com> From: Colin Didier <colin.didier@devialet.com> Add missing compatible and clock properties for EPIT node. Signed-off-by: Colin Didier <colin.didier@devialet.com> Signed-off-by: Cl?ment Peron <clement.peron@devialet.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> --- arch/arm/boot/dts/imx6qdl.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index c003e62bf290..0feec516847a 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -844,13 +844,23 @@ }; epit1: epit at 20d0000 { /* EPIT1 */ + compatible = "fsl,imx6q-epit", "fsl,imx31-epit"; reg = <0x020d0000 0x4000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_IPG_PER>, + <&clks IMX6QDL_CLK_EPIT1>; + clock-names = "ipg", "per"; + status = "disabled"; }; epit2: epit at 20d4000 { /* EPIT2 */ + compatible = "fsl,imx6q-epit", "fsl,imx31-epit"; reg = <0x020d4000 0x4000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_IPG_PER>, + <&clks IMX6QDL_CLK_EPIT2>; + clock-names = "ipg", "per"; + status = "disabled"; }; src: src at 20d8000 { -- 2.17.0
next prev parent reply other threads:[~2018-05-30 12:04 UTC|newest] Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-30 12:03 [PATCH v4 0/5] Reintroduce i.MX EPIT Timer Clément Péron 2018-05-30 12:03 ` Clément Péron 2018-05-30 12:03 ` [PATCH v4 1/5] ARM: imx: remove inexistant EPIT timer init Clément Péron 2018-05-30 12:03 ` Clément Péron 2018-05-30 12:03 ` [PATCH v4 2/5] clk: imx6: add EPIT clock support Clément Péron 2018-05-30 12:03 ` Clément Péron 2018-05-31 3:07 ` Rob Herring 2018-05-31 3:07 ` Rob Herring 2018-05-30 12:03 ` [PATCH v4 3/5] Documentation: DT: add i.MX EPIT timer binding Clément Péron 2018-05-30 12:03 ` Clément Péron 2018-05-31 3:10 ` Rob Herring 2018-05-31 3:10 ` Rob Herring 2018-05-31 8:26 ` Vladimir Zapolskiy 2018-05-31 8:26 ` Vladimir Zapolskiy 2018-05-30 12:03 ` [PATCH v4 4/5] clocksource: add driver for i.MX EPIT timer Clément Péron 2018-05-30 12:03 ` Clément Péron 2018-05-31 8:36 ` Vladimir Zapolskiy 2018-05-31 8:36 ` Vladimir Zapolskiy 2018-06-04 9:21 ` Clément Péron 2018-06-04 9:21 ` Clément Péron 2018-05-30 12:03 ` Clément Péron [this message] 2018-05-30 12:03 ` [PATCH v4 5/5] ARM: dts: imx6qdl: add missing compatible and clock properties for EPIT Clément Péron 2018-05-31 8:33 ` Vladimir Zapolskiy 2018-05-31 8:33 ` Vladimir Zapolskiy 2018-05-31 8:33 ` Vladimir Zapolskiy 2018-05-31 8:41 ` Clément Péron 2018-05-31 8:41 ` Clément Péron 2018-05-31 8:54 ` Vladimir Zapolskiy 2018-05-31 8:54 ` Vladimir Zapolskiy 2018-06-04 9:10 ` Clément Péron 2018-06-04 9:10 ` Clément Péron
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180530120327.27681-6-peron.clem@gmail.com \ --to=peron.clem@gmail.com \ --cc=clement.peron@devialet.com \ --cc=colin.didier@devialet.com \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=fabio.estevam@nxp.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=tglx@linutronix.de \ --cc=vladimir_zapolskiy@mentor.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.