[PATCH 1/2] fstests: get rid of set_prog_path

* [PATCH 1/2] fstests: get rid of set_prog_path
@ 2018-05-29 16:51 Jan Kara
  2018-05-29 16:51 ` [PATCH 2/2] Make ./new work for non-root user Jan Kara
  2018-06-03 14:21 ` [PATCH 1/2] fstests: get rid of set_prog_path Eryu Guan
  0 siblings, 2 replies; 5+ messages in thread
From: Jan Kara @ 2018-05-29 16:51 UTC (permalink / raw)
  To: fstests; +Cc: Dave Chinner, Dave Chinner, Jan Kara

From: Dave Chinner <david@fromorbit.com>

It's just a one line wrapper that adds complexity, remove it. Move
the couple of calls in tests to common/config, but leave the xfsdump
setup in place and just convert it.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
---
 common/config   | 169 +++++++++++++++++++++++++++-----------------------------
 common/dump     |   6 +-
 tests/btrfs/085 |   2 -
 tests/xfs/446   |   1 -
 4 files changed, 85 insertions(+), 93 deletions(-)

diff --git a/common/config b/common/config
index 02c378a96fa2..ccfb066ebe95 100644
--- a/common/config
+++ b/common/config
@@ -88,17 +88,11 @@ export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}
 
 export RECREATE_TEST_DEV=false
 
-# $1 = prog to look for
-set_prog_path()
-{
-	type -P $1
-}
-
 # Handle mkfs.$fstyp which does (or does not) require -f to overwrite
 set_mkfs_prog_path_with_opts()
 {
 	local fstyp=$1
-	local p=`set_prog_path mkfs.$fstyp`
+	local p=$(type -P mkfs.$fstyp)
 
 	# Note: mkfs.f2fs doesn't support the --help option yet, but it doesn't
 	# matter since it also prints the help when an invalid option is given.
@@ -117,105 +111,105 @@ _fatal()
     exit 1
 }
 
-export MKFS_PROG="`set_prog_path mkfs`"
+export MKFS_PROG="$(type -P mkfs)"
 [ "$MKFS_PROG" = "" ] && _fatal "mkfs not found"
 
-export MOUNT_PROG="`set_prog_path mount`"
+export MOUNT_PROG="$(type -P mount)"
 [ "$MOUNT_PROG" = "" ] && _fatal "mount not found"
 
-export UMOUNT_PROG="`set_prog_path umount`"
+export UMOUNT_PROG="$(type -P umount)"
 [ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"
 
 export FSSTRESS_PROG="./ltp/fsstress"
 [ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"
 
-export PERL_PROG="`set_prog_path perl`"
+export PERL_PROG="$(type -P perl)"
 [ "$PERL_PROG" = "" ] && _fatal "perl not found"
 
-export AWK_PROG="`set_prog_path awk`"
+export AWK_PROG="$(type -P awk)"
 [ "$AWK_PROG" = "" ] && _fatal "awk not found"
 
-export SED_PROG="`set_prog_path sed`"
+export SED_PROG="$(type -P sed)"
 [ "$SED_PROG" = "" ] && _fatal "sed not found"
 
-export BC_PROG="`set_prog_path bc`"
+export BC_PROG="$(type -P bc)"
 [ "$BC_PROG" = "" ] && _fatal "bc not found"
 
 export PS_ALL_FLAGS="-ef"
 
-export DF_PROG="`set_prog_path df`"
+export DF_PROG="$(type -P df)"
 [ "$DF_PROG" = "" ] && _fatal "df not found"
 [ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"
 
-export XFS_IO_PROG="`set_prog_path xfs_io`"
+export XFS_IO_PROG="$(type -P xfs_io)"
 [ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"
 
-export XFS_LOGPRINT_PROG="`set_prog_path xfs_logprint`"
-export XFS_REPAIR_PROG="`set_prog_path xfs_repair`"
-export XFS_DB_PROG="`set_prog_path xfs_db`"
-export XFS_GROWFS_PROG=`set_prog_path xfs_growfs`
-export XFS_SPACEMAN_PROG="`set_prog_path xfs_spaceman`"
-export XFS_SCRUB_PROG="`set_prog_path xfs_scrub`"
-export XFS_PARALLEL_REPAIR_PROG="`set_prog_path xfs_prepair`"
-export XFS_PARALLEL_REPAIR64_PROG="`set_prog_path xfs_prepair64`"
-export __XFSDUMP_PROG="`set_prog_path xfsdump`"
+export XFS_LOGPRINT_PROG="$(type -P xfs_logprint)"
+export XFS_REPAIR_PROG="$(type -P xfs_repair)"
+export XFS_DB_PROG="$(type -P xfs_db)"
+export XFS_GROWFS_PROG=$(type -P xfs_growfs)
+export XFS_SPACEMAN_PROG="$(type -P xfs_spaceman)"
+export XFS_SCRUB_PROG="$(type -P xfs_scrub)"
+export XFS_PARALLEL_REPAIR_PROG="$(type -P xfs_prepair)"
+export XFS_PARALLEL_REPAIR64_PROG="$(type -P xfs_prepair64)"
+export __XFSDUMP_PROG="$(type -P xfsdump)"
 if [ -n "$__XFSDUMP_PROG" ]; then
 	export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
 else
 	export XFSDUMP_PROG=""
 fi
-export XFSRESTORE_PROG="`set_prog_path xfsrestore`"
-export XFSINVUTIL_PROG="`set_prog_path xfsinvutil`"
-export GETFATTR_PROG="`set_prog_path getfattr`"
-export SETFATTR_PROG="`set_prog_path setfattr`"
-export CHACL_PROG="`set_prog_path chacl`"
-export ATTR_PROG="`set_prog_path attr`"
-export QUOTA_PROG="`set_prog_path quota`"
-export XFS_QUOTA_PROG="`set_prog_path xfs_quota`"
-export KILLALL_PROG="`set_prog_path killall`"
-export INDENT_PROG="`set_prog_path indent`"
-export XFS_COPY_PROG="`set_prog_path xfs_copy`"
-export FSTRIM_PROG="`set_prog_path fstrim`"
-export DUMPE2FS_PROG="`set_prog_path dumpe2fs`"
-export FIO_PROG="`set_prog_path fio`"
-export FILEFRAG_PROG="`set_prog_path filefrag`"
-export E4DEFRAG_PROG="`set_prog_path e4defrag`"
-export LOGGER_PROG="`set_prog_path logger`"
-export DBENCH_PROG="`set_prog_path dbench`"
-export DMSETUP_PROG="`set_prog_path dmsetup`"
-export WIPEFS_PROG="`set_prog_path wipefs`"
-export DUMP_PROG="`set_prog_path dump`"
-export RESTORE_PROG="`set_prog_path restore`"
-export LVM_PROG="`set_prog_path lvm`"
-export CHATTR_PROG="`set_prog_path chattr`"
-export DEBUGFS_PROG="`set_prog_path debugfs`"
-export UUIDGEN_PROG="`set_prog_path uuidgen`"
-export GETRICHACL_PROG="`set_prog_path getrichacl`"
-export SETRICHACL_PROG="`set_prog_path setrichacl`"
-export KEYCTL_PROG="`set_prog_path keyctl`"
-export XZ_PROG="`set_prog_path xz`"
-export FLOCK_PROG="`set_prog_path flock`"
-export LDD_PROG="`set_prog_path ldd`"
-export TIMEOUT_PROG="`set_prog_path timeout`"
-export MAN_PROG="`set_prog_path man`"
-export NFS4_SETFACL_PROG="`set_prog_path nfs4_setfacl`"
-export NFS4_GETFACL_PROG="`set_prog_path nfs4_getfacl`"
-export UBIUPDATEVOL_PROG="`set_prog_path ubiupdatevol`"
-export THIN_CHECK_PROG="$(set_prog_path thin_check)"
-export PYTHON2_PROG="`set_prog_path python2`"
-export SQLITE3_PROG="`set_prog_path sqlite3`"
-export TIMEOUT_PROG="`set_prog_path timeout`"
-export SETCAP_PROG="`set_prog_path setcap`"
-export GETCAP_PROG="`set_prog_path getcap`"
+export XFSRESTORE_PROG="$(type -P xfsrestore)"
+export XFSINVUTIL_PROG="$(type -P xfsinvutil)"
+export GETFATTR_PROG="$(type -P getfattr)"
+export SETFATTR_PROG="$(type -P setfattr)"
+export CHACL_PROG="$(type -P chacl)"
+export ATTR_PROG="$(type -P attr)"
+export QUOTA_PROG="$(type -P quota)"
+export XFS_QUOTA_PROG="$(type -P xfs_quota)"
+export KILLALL_PROG="$(type -P killall)"
+export INDENT_PROG="$(type -P indent)"
+export XFS_COPY_PROG="$(type -P xfs_copy)"
+export FSTRIM_PROG="$(type -P fstrim)"
+export DUMPE2FS_PROG="$(type -P dumpe2fs)"
+export FIO_PROG="$(type -P fio)"
+export FILEFRAG_PROG="$(type -P filefrag)"
+export E4DEFRAG_PROG="$(type -P e4defrag)"
+export LOGGER_PROG="$(type -P logger)"
+export DBENCH_PROG="$(type -P dbench)"
+export DMSETUP_PROG="$(type -P dmsetup)"
+export WIPEFS_PROG="$(type -P wipefs)"
+export DUMP_PROG="$(type -P dump)"
+export RESTORE_PROG="$(type -P restore)"
+export LVM_PROG="$(type -P lvm)"
+export CHATTR_PROG="$(type -P chattr)"
+export DEBUGFS_PROG="$(type -P debugfs)"
+export UUIDGEN_PROG="$(type -P uuidgen)"
+export GETRICHACL_PROG="$(type -P getrichacl)"
+export SETRICHACL_PROG="$(type -P setrichacl)"
+export KEYCTL_PROG="$(type -P keyctl)"
+export XZ_PROG="$(type -P xz)"
+export FLOCK_PROG="$(type -P flock)"
+export LDD_PROG="$(type -P ldd)"
+export TIMEOUT_PROG="$(type -P timeout)"
+export MAN_PROG="$(type -P man)"
+export NFS4_SETFACL_PROG="$(type -P nfs4_setfacl)"
+export NFS4_GETFACL_PROG="$(type -P nfs4_getfacl)"
+export UBIUPDATEVOL_PROG="$(type -P ubiupdatevol)"
+export THIN_CHECK_PROG="$(type -P thin_check)"
+export PYTHON2_PROG="$(type -P python2)"
+export SQLITE3_PROG="$(type -P sqlite3)"
+export TIMEOUT_PROG="$(type -P timeout)"
+export SETCAP_PROG="$(type -P setcap)"
+export GETCAP_PROG="$(type -P getcap)"
 
 # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
 # newer systems have udevadm command but older systems like RHEL5 don't.
 # But if neither one is available, just set it to "sleep 1" to wait for lv to
 # be settled
-UDEV_SETTLE_PROG="`set_prog_path udevadm`"
+UDEV_SETTLE_PROG="$(type -P udevadm)"
 if [ "$UDEV_SETTLE_PROG" == "" ]; then
 	# try udevsettle command
-	UDEV_SETTLE_PROG="`set_prog_path udevsettle`"
+	UDEV_SETTLE_PROG="$(type -P udevsettle)"
 else
 	# udevadm is available, add 'settle' as subcommand
 	UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
@@ -228,23 +222,24 @@ export UDEV_SETTLE_PROG
 
 case "$HOSTOS" in
     Linux)
-        export MKFS_XFS_PROG="`set_prog_path mkfs.xfs`"
-        export MKFS_EXT4_PROG="`set_prog_path mkfs.ext4`"
-        export MKFS_UDF_PROG="`set_prog_path mkudffs`"
-        export MKFS_BTRFS_PROG="`set_mkfs_prog_path_with_opts btrfs`"
-        export MKFS_F2FS_PROG="`set_mkfs_prog_path_with_opts f2fs`"
-        export DUMP_F2FS_PROG="`set_prog_path dump.f2fs`"
-        export BTRFS_UTIL_PROG="`set_prog_path btrfs`"
-        export BTRFS_SHOW_SUPER_PROG="`set_prog_path btrfs-show-super`"
-	export BTRFS_CONVERT_PROG="`set_prog_path btrfs-convert`"
-        export XFS_FSR_PROG="`set_prog_path xfs_fsr`"
-        export MKFS_NFS_PROG="false"
-        export MKFS_CIFS_PROG="false"
-        export MKFS_OVERLAY_PROG="false"
-        export MKFS_REISER4_PROG="`set_prog_path mkfs.reiser4`"
-	export E2FSCK_PROG="`set_prog_path e2fsck`"
-	export TUNE2FS_PROG="`set_prog_path tune2fs`"
-	export FSCK_OVERLAY_PROG="`set_prog_path fsck.overlay`"
+	export MKFS_XFS_PROG=$(type -P mkfs.xfs)
+	export MKFS_EXT4_PROG=$(type -P mkfs.ext4)
+	export MKFS_UDF_PROG=$(type -P mkudffs)
+	export MKFS_BTRFS_PROG=$(type -P btrfs)
+	export MKFS_F2FS_PROG=$(type -P f2fs)
+	export DUMP_F2FS_PROG=$(type -P dump.f2fs)
+	export BTRFS_UTIL_PROG=$(type -P btrfs)
+	export BTRFS_SHOW_SUPER_PROG=$(type -P btrfs-show-super)
+	export BTRFS_CONVERT_PROG=$(type -P btrfs-convert)
+	export BTRFS_DEBUG_TREE_PROG=$(type -P btrfs-debug-tree)
+	export XFS_FSR_PROG=$(type -P xfs_fsr)
+	export MKFS_NFS_PROG="false"
+	export MKFS_CIFS_PROG="false"
+	export MKFS_OVERLAY_PROG="false"
+	export MKFS_REISER4_PROG=$(type -P mkfs.reiser4)
+	export E2FSCK_PROG=$(type -P e2fsck)
+	export TUNE2FS_PROG=$(type -P tune2fs)
+	export FSCK_OVERLAY_PROG=$(type -P fsck.overlay)
         ;;
 esac
 
diff --git a/common/dump b/common/dump
index 7b9c10a25414..8a0ba1096d6a 100644
--- a/common/dump
+++ b/common/dump
@@ -29,10 +29,10 @@ if [ -n "$DEBUGDUMP" ]; then
 
 	# Use dump/restore in qa directory (copy them here) for debugging
 	export PATH="$here:$PATH"
-	export __XFSDUMP_PROG="`set_prog_path xfsdump`"
+	export __XFSDUMP_PROG=$(type -P xfsdump)
 	export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
-	export XFSRESTORE_PROG="`set_prog_path xfsrestore`"
-	export XFSINVUTIL_PROG="`set_prog_path xfsinvutil`"
+	export XFSRESTORE_PROG=$(type -P xfsrestore)
+	export XFSINVUTIL_PROG=$(type -P xfsinvutil)
 	[ -x $here/xfsdump ]    && echo "Using xfstests' xfsdump for debug"
 	[ -x $here/xfsrestore ] && echo "Using xfstests' xfsrestore for debug"
 	[ -x $here/xfsinvutil ] && echo "Using xfstests' xfsinvutil for debug"
diff --git a/tests/btrfs/085 b/tests/btrfs/085
index 804899724cba..a1edc28341da 100755
--- a/tests/btrfs/085
+++ b/tests/btrfs/085
@@ -55,8 +55,6 @@ _supported_fs btrfs
 _supported_os Linux
 _require_scratch
 _require_dm_target flakey
-
-BTRFS_DEBUG_TREE_PROG="`set_prog_path btrfs-debug-tree`"
 _require_command "$BTRFS_DEBUG_TREE_PROG" btrfs-debug-tree
 
 rm -f $seqres.full
diff --git a/tests/xfs/446 b/tests/xfs/446
index 752c6a7de827..ac74723f471f 100755
--- a/tests/xfs/446
+++ b/tests/xfs/446
@@ -37,7 +37,6 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
 # real QA test starts here
 _supported_fs xfs
 _supported_os Linux
-export CHECKBASHISMS_PROG="`set_prog_path checkbashisms`"
 _require_command "$CHECKBASHISMS_PROG" checkbashisms
 
 test -z "$WORKAREA" && _notrun "Can't find xfsprogs source"
-- 
2.13.6


^ permalink raw reply related	[flat|nested] 5+ messages in thread