From: Radu Pirea <radu.pirea@microchip.com>
To: <broonie@kernel.org>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <lee.jones@linaro.org>,
<richard.genoud@gmail.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <gregkh@linuxfoundation.org>
Cc: <linux-spi@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-serial@vger.kernel.org>,
Radu Pirea <radu.pirea@microchip.com>
Subject: [PATCH v6 0/6] Driver for at91 usart in spi mode
Date: Thu, 7 Jun 2018 14:00:14 +0300 [thread overview]
Message-ID: <20180607110020.20565-1-radu.pirea@microchip.com> (raw)
Hello,
This is the second version of driver. I added a mfd driver which by
default probes atmel_serial driver and if in dt is specified to probe
the spi driver, then the spi-at91-usart driver will be probed. The
compatible for atmel_serial is now the compatible for at91-usart mfd
driver and compatilbe for atmel_serial driver was changed in order to
keep the bindings for serial as they are.
Changes in v1:
- added spi-at91-usart driver
Changes in v2:
- added at91-usart mfd driver
- modified spi-at91-usart driver to work as mfd driver child
- modified atmel_serial driver to work as mfd driver child
Changes in v3:
- fixed spi slaves probing
Changes in v4:
- modified the spi driver to use cs gpio support form spi subsystem
- fixed dma transfers for serial driver
- squashed binding for spi and serial and moved them to mfd/atmel-usart.txt
Changes in v5:
- fixed usage of stdout-path property with atmel_serial driver
Changes in v6:
- removed unused compatible strings from serial and spi drivers
Radu Pirea (6):
MAINTAINERS: add at91 usart mfd driver
dt-bindings: add binding for atmel-usart in SPI mode
mfd: at91-usart: added mfd driver for usart
MAINTAINERS: add at91 usart spi driver
spi: at91-usart: add driver for at91-usart as spi
tty/serial: atmel: change the driver to work under at91-usart mfd
.../bindings/{serial => mfd}/atmel-usart.txt | 25 +-
MAINTAINERS | 16 +
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/at91-usart.c | 68 +++
drivers/spi/Kconfig | 9 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-at91-usart.c | 434 ++++++++++++++++++
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/atmel_serial.c | 42 +-
include/dt-bindings/mfd/at91-usart.h | 17 +
11 files changed, 606 insertions(+), 17 deletions(-)
rename Documentation/devicetree/bindings/{serial => mfd}/atmel-usart.txt (76%)
create mode 100644 drivers/mfd/at91-usart.c
create mode 100644 drivers/spi/spi-at91-usart.c
create mode 100644 include/dt-bindings/mfd/at91-usart.h
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Radu Pirea <radu.pirea@microchip.com>
To: broonie@kernel.org, nicolas.ferre@microchip.com,
alexandre.belloni@bootlin.com, lee.jones@linaro.org,
richard.genoud@gmail.com, robh+dt@kernel.org,
mark.rutland@arm.com, gregkh@linuxfoundation.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-spi@vger.kernel.org, linux-serial@vger.kernel.org,
Radu Pirea <radu.pirea@microchip.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/6] Driver for at91 usart in spi mode
Date: Thu, 7 Jun 2018 14:00:14 +0300 [thread overview]
Message-ID: <20180607110020.20565-1-radu.pirea@microchip.com> (raw)
Hello,
This is the second version of driver. I added a mfd driver which by
default probes atmel_serial driver and if in dt is specified to probe
the spi driver, then the spi-at91-usart driver will be probed. The
compatible for atmel_serial is now the compatible for at91-usart mfd
driver and compatilbe for atmel_serial driver was changed in order to
keep the bindings for serial as they are.
Changes in v1:
- added spi-at91-usart driver
Changes in v2:
- added at91-usart mfd driver
- modified spi-at91-usart driver to work as mfd driver child
- modified atmel_serial driver to work as mfd driver child
Changes in v3:
- fixed spi slaves probing
Changes in v4:
- modified the spi driver to use cs gpio support form spi subsystem
- fixed dma transfers for serial driver
- squashed binding for spi and serial and moved them to mfd/atmel-usart.txt
Changes in v5:
- fixed usage of stdout-path property with atmel_serial driver
Changes in v6:
- removed unused compatible strings from serial and spi drivers
Radu Pirea (6):
MAINTAINERS: add at91 usart mfd driver
dt-bindings: add binding for atmel-usart in SPI mode
mfd: at91-usart: added mfd driver for usart
MAINTAINERS: add at91 usart spi driver
spi: at91-usart: add driver for at91-usart as spi
tty/serial: atmel: change the driver to work under at91-usart mfd
.../bindings/{serial => mfd}/atmel-usart.txt | 25 +-
MAINTAINERS | 16 +
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/at91-usart.c | 68 +++
drivers/spi/Kconfig | 9 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-at91-usart.c | 434 ++++++++++++++++++
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/atmel_serial.c | 42 +-
include/dt-bindings/mfd/at91-usart.h | 17 +
11 files changed, 606 insertions(+), 17 deletions(-)
rename Documentation/devicetree/bindings/{serial => mfd}/atmel-usart.txt (76%)
create mode 100644 drivers/mfd/at91-usart.c
create mode 100644 drivers/spi/spi-at91-usart.c
create mode 100644 include/dt-bindings/mfd/at91-usart.h
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Radu Pirea <radu.pirea@microchip.com>
To: <broonie@kernel.org>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <lee.jones@linaro.org>,
<richard.genoud@gmail.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <gregkh@linuxfoundation.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-spi@vger.kernel.org, linux-serial@vger.kernel.org,
Radu Pirea <radu.pirea@microchip.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/6] Driver for at91 usart in spi mode
Date: Thu, 7 Jun 2018 14:00:14 +0300 [thread overview]
Message-ID: <20180607110020.20565-1-radu.pirea@microchip.com> (raw)
Hello,
This is the second version of driver. I added a mfd driver which by
default probes atmel_serial driver and if in dt is specified to probe
the spi driver, then the spi-at91-usart driver will be probed. The
compatible for atmel_serial is now the compatible for at91-usart mfd
driver and compatilbe for atmel_serial driver was changed in order to
keep the bindings for serial as they are.
Changes in v1:
- added spi-at91-usart driver
Changes in v2:
- added at91-usart mfd driver
- modified spi-at91-usart driver to work as mfd driver child
- modified atmel_serial driver to work as mfd driver child
Changes in v3:
- fixed spi slaves probing
Changes in v4:
- modified the spi driver to use cs gpio support form spi subsystem
- fixed dma transfers for serial driver
- squashed binding for spi and serial and moved them to mfd/atmel-usart.txt
Changes in v5:
- fixed usage of stdout-path property with atmel_serial driver
Changes in v6:
- removed unused compatible strings from serial and spi drivers
Radu Pirea (6):
MAINTAINERS: add at91 usart mfd driver
dt-bindings: add binding for atmel-usart in SPI mode
mfd: at91-usart: added mfd driver for usart
MAINTAINERS: add at91 usart spi driver
spi: at91-usart: add driver for at91-usart as spi
tty/serial: atmel: change the driver to work under at91-usart mfd
.../bindings/{serial => mfd}/atmel-usart.txt | 25 +-
MAINTAINERS | 16 +
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/at91-usart.c | 68 +++
drivers/spi/Kconfig | 9 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-at91-usart.c | 434 ++++++++++++++++++
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/atmel_serial.c | 42 +-
include/dt-bindings/mfd/at91-usart.h | 17 +
11 files changed, 606 insertions(+), 17 deletions(-)
rename Documentation/devicetree/bindings/{serial => mfd}/atmel-usart.txt (76%)
create mode 100644 drivers/mfd/at91-usart.c
create mode 100644 drivers/spi/spi-at91-usart.c
create mode 100644 include/dt-bindings/mfd/at91-usart.h
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: radu.pirea@microchip.com (Radu Pirea)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/6] Driver for at91 usart in spi mode
Date: Thu, 7 Jun 2018 14:00:14 +0300 [thread overview]
Message-ID: <20180607110020.20565-1-radu.pirea@microchip.com> (raw)
Hello,
This is the second version of driver. I added a mfd driver which by
default probes atmel_serial driver and if in dt is specified to probe
the spi driver, then the spi-at91-usart driver will be probed. The
compatible for atmel_serial is now the compatible for at91-usart mfd
driver and compatilbe for atmel_serial driver was changed in order to
keep the bindings for serial as they are.
Changes in v1:
- added spi-at91-usart driver
Changes in v2:
- added at91-usart mfd driver
- modified spi-at91-usart driver to work as mfd driver child
- modified atmel_serial driver to work as mfd driver child
Changes in v3:
- fixed spi slaves probing
Changes in v4:
- modified the spi driver to use cs gpio support form spi subsystem
- fixed dma transfers for serial driver
- squashed binding for spi and serial and moved them to mfd/atmel-usart.txt
Changes in v5:
- fixed usage of stdout-path property with atmel_serial driver
Changes in v6:
- removed unused compatible strings from serial and spi drivers
Radu Pirea (6):
MAINTAINERS: add at91 usart mfd driver
dt-bindings: add binding for atmel-usart in SPI mode
mfd: at91-usart: added mfd driver for usart
MAINTAINERS: add at91 usart spi driver
spi: at91-usart: add driver for at91-usart as spi
tty/serial: atmel: change the driver to work under at91-usart mfd
.../bindings/{serial => mfd}/atmel-usart.txt | 25 +-
MAINTAINERS | 16 +
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/at91-usart.c | 68 +++
drivers/spi/Kconfig | 9 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-at91-usart.c | 434 ++++++++++++++++++
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/atmel_serial.c | 42 +-
include/dt-bindings/mfd/at91-usart.h | 17 +
11 files changed, 606 insertions(+), 17 deletions(-)
rename Documentation/devicetree/bindings/{serial => mfd}/atmel-usart.txt (76%)
create mode 100644 drivers/mfd/at91-usart.c
create mode 100644 drivers/spi/spi-at91-usart.c
create mode 100644 include/dt-bindings/mfd/at91-usart.h
--
2.17.1
next reply other threads:[~2018-06-07 11:01 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-07 11:00 Radu Pirea [this message]
2018-06-07 11:00 ` [PATCH v6 0/6] Driver for at91 usart in spi mode Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` [PATCH v6 1/6] MAINTAINERS: add at91 usart mfd driver Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` [PATCH v6 2/6] dt-bindings: add binding for atmel-usart in SPI mode Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-11 15:37 ` Alexandre Belloni
2018-06-11 15:37 ` Alexandre Belloni
2018-06-07 11:00 ` [PATCH v6 3/6] mfd: at91-usart: added mfd driver for usart Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-11 15:36 ` Alexandre Belloni
2018-06-11 15:36 ` Alexandre Belloni
2018-06-07 11:00 ` [PATCH v6 4/6] MAINTAINERS: add at91 usart spi driver Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` [PATCH v6 5/6] spi: at91-usart: add driver for at91-usart as spi Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` [PATCH v6 6/6] tty/serial: atmel: change the driver to work under at91-usart mfd Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 11:00 ` Radu Pirea
2018-06-07 13:42 ` Richard Genoud
2018-06-07 13:42 ` Richard Genoud
2018-06-07 13:18 ` [PATCH v6 0/6] Driver for at91 usart in spi mode Andy Shevchenko
2018-06-07 13:18 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180607110020.20565-1-radu.pirea@microchip.com \
--to=radu.pirea@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nicolas.ferre@microchip.com \
--cc=richard.genoud@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.