* [PATCH v1] ARM: imx: add imx7d-m4
@ 2018-04-05 11:51 Oleksij Rempel
2018-06-11 8:02 ` Oleksij Rempel
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Oleksij Rempel @ 2018-04-05 11:51 UTC (permalink / raw)
To: linux-arm-kernel
Provide basic support for Cortex-M4 located on NXP iMX7D.
This code was tested in combination with imx-rproc driver
which will upload with specially formatted ELF image containing
kernel, device and CPIO rootfs.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boot/dts/Makefile | 2 +-
arch/arm/mach-imx/Kconfig | 33 +++++++++++++++++++++------------
arch/arm/mach-imx/Makefile | 3 ++-
arch/arm/mach-imx/mach-imx7d-cm4.c | 21 +++++++++++++++++++++
4 files changed, 45 insertions(+), 14 deletions(-)
create mode 100644 arch/arm/mach-imx/mach-imx7d-cm4.c
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 852452515bea..d49bb9a58aee 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -527,7 +527,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
imx6ull-14x14-evk.dtb
-dtb-$(CONFIG_SOC_IMX7D) += \
+dtb-$(CONFIG_SOC_IMX7D_CA7) += \
imx7d-cl-som-imx7.dtb \
imx7d-colibri-emmc-eval-v3.dtb \
imx7d-colibri-eval-v3.dtb \
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 782699e67600..101c8599d952 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -528,18 +528,6 @@ config SOC_IMX6UL
help
This enables support for Freescale i.MX6 UltraLite processor.
-config SOC_IMX7D
- bool "i.MX7 Dual support"
- select PINCTRL_IMX7D
- select ARM_GIC
- select HAVE_ARM_ARCH_TIMER
- select HAVE_IMX_ANATOP
- select HAVE_IMX_MMDC
- select HAVE_IMX_SRC
- select IMX_GPCV2
- help
- This enables support for Freescale i.MX7 Dual processor.
-
config SOC_LS1021A
bool "Freescale LS1021A support"
select ARM_GIC
@@ -554,6 +542,27 @@ comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
+config SOC_IMX7D_CA7
+ bool
+ select ARM_GIC
+ select HAVE_ARM_ARCH_TIMER
+ select HAVE_IMX_ANATOP
+ select HAVE_IMX_MMDC
+ select HAVE_IMX_SRC
+ select IMX_GPCV2
+
+config SOC_IMX7D_CM4
+ bool
+ select ARMV7M_SYSTICK
+
+config SOC_IMX7D
+ bool "i.MX7 Dual support"
+ select PINCTRL_IMX7D
+ select SOC_IMX7D_CA7 if ARCH_MULTI_V7
+ select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
+ help
+ This enables support for Freescale i.MX7 Dual processor.
+
config SOC_VF610
bool "Vybrid Family VF610 support"
select ARM_GIC if ARCH_MULTI_V7
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8ff71058207d..68640f100ef3 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -80,7 +80,8 @@ obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o
obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o
obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o
-obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
+obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o
+obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o
ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c
new file mode 100644
index 000000000000..c36dea79aeb8
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx7d-cm4.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2017 Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <asm/v7m.h>
+#include <asm/mach/arch.h>
+
+static const char * const imx7d_cm4_dt_compat[] __initconst = {
+ "fsl,imx7d-cm4",
+ NULL,
+};
+
+DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)")
+ .dt_compat = imx7d_cm4_dt_compat,
+ .restart = armv7m_restart,
+MACHINE_END
--
2.16.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1] ARM: imx: add imx7d-m4 2018-04-05 11:51 [PATCH v1] ARM: imx: add imx7d-m4 Oleksij Rempel @ 2018-06-11 8:02 ` Oleksij Rempel 2018-06-11 8:20 ` Shawn Guo 2018-06-17 6:44 ` Shawn Guo 2018-06-17 6:46 ` Shawn Guo 2 siblings, 1 reply; 13+ messages in thread From: Oleksij Rempel @ 2018-06-11 8:02 UTC (permalink / raw) To: linux-arm-kernel Hi all, this patch was send 05.04.2018. Any comments? @Shawn, can you please take it? On 05.04.2018 13:51, Oleksij Rempel wrote: > Provide basic support for Cortex-M4 located on NXP iMX7D. > This code was tested in combination with imx-rproc driver > which will upload with specially formatted ELF image containing > kernel, device and CPIO rootfs. > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > arch/arm/boot/dts/Makefile | 2 +- > arch/arm/mach-imx/Kconfig | 33 +++++++++++++++++++++------------ > arch/arm/mach-imx/Makefile | 3 ++- > arch/arm/mach-imx/mach-imx7d-cm4.c | 21 +++++++++++++++++++++ > 4 files changed, 45 insertions(+), 14 deletions(-) > create mode 100644 arch/arm/mach-imx/mach-imx7d-cm4.c > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 852452515bea..d49bb9a58aee 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -527,7 +527,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ > imx6ul-tx6ul-0011.dtb \ > imx6ul-tx6ul-mainboard.dtb \ > imx6ull-14x14-evk.dtb > -dtb-$(CONFIG_SOC_IMX7D) += \ > +dtb-$(CONFIG_SOC_IMX7D_CA7) += \ > imx7d-cl-som-imx7.dtb \ > imx7d-colibri-emmc-eval-v3.dtb \ > imx7d-colibri-eval-v3.dtb \ > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 782699e67600..101c8599d952 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -528,18 +528,6 @@ config SOC_IMX6UL > help > This enables support for Freescale i.MX6 UltraLite processor. > > -config SOC_IMX7D > - bool "i.MX7 Dual support" > - select PINCTRL_IMX7D > - select ARM_GIC > - select HAVE_ARM_ARCH_TIMER > - select HAVE_IMX_ANATOP > - select HAVE_IMX_MMDC > - select HAVE_IMX_SRC > - select IMX_GPCV2 > - help > - This enables support for Freescale i.MX7 Dual processor. > - > config SOC_LS1021A > bool "Freescale LS1021A support" > select ARM_GIC > @@ -554,6 +542,27 @@ comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" > > if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M > > +config SOC_IMX7D_CA7 > + bool > + select ARM_GIC > + select HAVE_ARM_ARCH_TIMER > + select HAVE_IMX_ANATOP > + select HAVE_IMX_MMDC > + select HAVE_IMX_SRC > + select IMX_GPCV2 > + > +config SOC_IMX7D_CM4 > + bool > + select ARMV7M_SYSTICK > + > +config SOC_IMX7D > + bool "i.MX7 Dual support" > + select PINCTRL_IMX7D > + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 > + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M > + help > + This enables support for Freescale i.MX7 Dual processor. > + > config SOC_VF610 > bool "Vybrid Family VF610 support" > select ARM_GIC if ARCH_MULTI_V7 > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > index 8ff71058207d..68640f100ef3 100644 > --- a/arch/arm/mach-imx/Makefile > +++ b/arch/arm/mach-imx/Makefile > @@ -80,7 +80,8 @@ obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o > obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o > obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o > obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o > -obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o > +obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o > +obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o > > ifeq ($(CONFIG_SUSPEND),y) > AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a > diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c > new file mode 100644 > index 000000000000..c36dea79aeb8 > --- /dev/null > +++ b/arch/arm/mach-imx/mach-imx7d-cm4.c > @@ -0,0 +1,21 @@ > +/* > + * Copyright 2017 Pengutronix > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/kernel.h> > +#include <asm/v7m.h> > +#include <asm/mach/arch.h> > + > +static const char * const imx7d_cm4_dt_compat[] __initconst = { > + "fsl,imx7d-cm4", > + NULL, > +}; > + > +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)") > + .dt_compat = imx7d_cm4_dt_compat, > + .restart = armv7m_restart, > +MACHINE_END > -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180611/6e28fea3/attachment.sig> ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1] ARM: imx: add imx7d-m4 2018-06-11 8:02 ` Oleksij Rempel @ 2018-06-11 8:20 ` Shawn Guo 2018-06-11 8:35 ` Lucas Stach 0 siblings, 1 reply; 13+ messages in thread From: Shawn Guo @ 2018-06-11 8:20 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jun 11, 2018 at 10:02:53AM +0200, Oleksij Rempel wrote: > Hi all, > > this patch was send 05.04.2018. Any comments? > > @Shawn, can you please take it? Honestly I'm not sure how useful it will be. If we can have some i.MX developers ACK on it, I will be more comfortable to take it. Shawn > > On 05.04.2018 13:51, Oleksij Rempel wrote: > > Provide basic support for Cortex-M4 located on NXP iMX7D. > > This code was tested in combination with imx-rproc driver > > which will upload with specially formatted ELF image containing > > kernel, device and CPIO rootfs. > > > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > > --- > > arch/arm/boot/dts/Makefile | 2 +- > > arch/arm/mach-imx/Kconfig | 33 +++++++++++++++++++++------------ > > arch/arm/mach-imx/Makefile | 3 ++- > > arch/arm/mach-imx/mach-imx7d-cm4.c | 21 +++++++++++++++++++++ > > 4 files changed, 45 insertions(+), 14 deletions(-) > > create mode 100644 arch/arm/mach-imx/mach-imx7d-cm4.c > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index 852452515bea..d49bb9a58aee 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -527,7 +527,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ > > imx6ul-tx6ul-0011.dtb \ > > imx6ul-tx6ul-mainboard.dtb \ > > imx6ull-14x14-evk.dtb > > -dtb-$(CONFIG_SOC_IMX7D) += \ > > +dtb-$(CONFIG_SOC_IMX7D_CA7) += \ > > imx7d-cl-som-imx7.dtb \ > > imx7d-colibri-emmc-eval-v3.dtb \ > > imx7d-colibri-eval-v3.dtb \ > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > > index 782699e67600..101c8599d952 100644 > > --- a/arch/arm/mach-imx/Kconfig > > +++ b/arch/arm/mach-imx/Kconfig > > @@ -528,18 +528,6 @@ config SOC_IMX6UL > > help > > This enables support for Freescale i.MX6 UltraLite processor. > > > > -config SOC_IMX7D > > - bool "i.MX7 Dual support" > > - select PINCTRL_IMX7D > > - select ARM_GIC > > - select HAVE_ARM_ARCH_TIMER > > - select HAVE_IMX_ANATOP > > - select HAVE_IMX_MMDC > > - select HAVE_IMX_SRC > > - select IMX_GPCV2 > > - help > > - This enables support for Freescale i.MX7 Dual processor. > > - > > config SOC_LS1021A > > bool "Freescale LS1021A support" > > select ARM_GIC > > @@ -554,6 +542,27 @@ comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" > > > > if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M > > > > +config SOC_IMX7D_CA7 > > + bool > > + select ARM_GIC > > + select HAVE_ARM_ARCH_TIMER > > + select HAVE_IMX_ANATOP > > + select HAVE_IMX_MMDC > > + select HAVE_IMX_SRC > > + select IMX_GPCV2 > > + > > +config SOC_IMX7D_CM4 > > + bool > > + select ARMV7M_SYSTICK > > + > > +config SOC_IMX7D > > + bool "i.MX7 Dual support" > > + select PINCTRL_IMX7D > > + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 > > + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M > > + help > > + This enables support for Freescale i.MX7 Dual processor. > > + > > config SOC_VF610 > > bool "Vybrid Family VF610 support" > > select ARM_GIC if ARCH_MULTI_V7 > > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > > index 8ff71058207d..68640f100ef3 100644 > > --- a/arch/arm/mach-imx/Makefile > > +++ b/arch/arm/mach-imx/Makefile > > @@ -80,7 +80,8 @@ obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o > > obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o > > obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o > > obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o > > -obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o > > +obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o > > +obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o > > > > ifeq ($(CONFIG_SUSPEND),y) > > AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a > > diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c > > new file mode 100644 > > index 000000000000..c36dea79aeb8 > > --- /dev/null > > +++ b/arch/arm/mach-imx/mach-imx7d-cm4.c > > @@ -0,0 +1,21 @@ > > +/* > > + * Copyright 2017 Pengutronix > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include <linux/kernel.h> > > +#include <asm/v7m.h> > > +#include <asm/mach/arch.h> > > + > > +static const char * const imx7d_cm4_dt_compat[] __initconst = { > > + "fsl,imx7d-cm4", > > + NULL, > > +}; > > + > > +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)") > > + .dt_compat = imx7d_cm4_dt_compat, > > + .restart = armv7m_restart, > > +MACHINE_END > > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1] ARM: imx: add imx7d-m4 2018-06-11 8:20 ` Shawn Guo @ 2018-06-11 8:35 ` Lucas Stach 2018-06-11 11:48 ` Stefan Agner 0 siblings, 1 reply; 13+ messages in thread From: Lucas Stach @ 2018-06-11 8:35 UTC (permalink / raw) To: linux-arm-kernel Hi Shawn, Am Montag, den 11.06.2018, 16:20 +0800 schrieb Shawn Guo: > On Mon, Jun 11, 2018 at 10:02:53AM +0200, Oleksij Rempel wrote: > > Hi all, > > > > this patch was send 05.04.2018. Any comments? > > > > @Shawn, can you please take it? > > Honestly I'm not sure how useful it will be.??If we can have some i.MX > developers ACK on it, I will be more comfortable to take it. This is all highly experimental and in PoC stage, but we see some value in running a second Linux system on the M4 coprocessor. There are lots of things that still need to be figured out, but we are working on this from time to time when there are some hours to spare. This patch seems like a good step in the right direction and IMHO the amount of code and changes is small enough to carry it upstream without impacting anything else. I would be happy if this could be pulled in. Regards, Lucas > > > > On 05.04.2018 13:51, Oleksij Rempel wrote: > > > Provide basic support for Cortex-M4 located on NXP iMX7D. > > > This code was tested in combination with imx-rproc driver > > > which will upload with specially formatted ELF image containing > > > kernel, device and CPIO rootfs. > > > > > > > > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > > > --- > > > ?arch/arm/boot/dts/Makefile?????????|??2 +- > > > ?arch/arm/mach-imx/Kconfig??????????| 33 +++++++++++++++++++++------------ > > > ?arch/arm/mach-imx/Makefile?????????|??3 ++- > > > ?arch/arm/mach-imx/mach-imx7d-cm4.c | 21 +++++++++++++++++++++ > > > ?4 files changed, 45 insertions(+), 14 deletions(-) > > > ?create mode 100644 arch/arm/mach-imx/mach-imx7d-cm4.c > > > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > > index 852452515bea..d49bb9a58aee 100644 > > > --- a/arch/arm/boot/dts/Makefile > > > +++ b/arch/arm/boot/dts/Makefile > > > @@ -527,7 +527,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ > > > > > > ? imx6ul-tx6ul-0011.dtb \ > > > > > > ? imx6ul-tx6ul-mainboard.dtb \ > > > > > > ? imx6ull-14x14-evk.dtb > > > -dtb-$(CONFIG_SOC_IMX7D) += \ > > > +dtb-$(CONFIG_SOC_IMX7D_CA7) += \ > > > > > > ? imx7d-cl-som-imx7.dtb \ > > > > > > ? imx7d-colibri-emmc-eval-v3.dtb \ > > > > > > ? imx7d-colibri-eval-v3.dtb \ > > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > > > index 782699e67600..101c8599d952 100644 > > > --- a/arch/arm/mach-imx/Kconfig > > > +++ b/arch/arm/mach-imx/Kconfig > > > @@ -528,18 +528,6 @@ config SOC_IMX6UL > > > > > > ? help > > > > > > ? ??This enables support for Freescale i.MX6 UltraLite processor. > > > ? > > > -config SOC_IMX7D > > > > > > - bool "i.MX7 Dual support" > > > > > > - select PINCTRL_IMX7D > > > > > > - select ARM_GIC > > > > > > - select HAVE_ARM_ARCH_TIMER > > > > > > - select HAVE_IMX_ANATOP > > > > > > - select HAVE_IMX_MMDC > > > > > > - select HAVE_IMX_SRC > > > > > > - select IMX_GPCV2 > > > > > > - help > > > > > > - This enables support for Freescale i.MX7 Dual processor. > > > - > > > ?config SOC_LS1021A > > > > > > ? bool "Freescale LS1021A support" > > > > > > ? select ARM_GIC > > > @@ -554,6 +542,27 @@ comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" > > > ? > > > ?if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M > > > ? > > > +config SOC_IMX7D_CA7 > > > > > > + bool > > > > > > + select ARM_GIC > > > > > > + select HAVE_ARM_ARCH_TIMER > > > > > > + select HAVE_IMX_ANATOP > > > > > > + select HAVE_IMX_MMDC > > > > > > + select HAVE_IMX_SRC > > > > > > + select IMX_GPCV2 > > > + > > > +config SOC_IMX7D_CM4 > > > > > > + bool > > > > > > + select ARMV7M_SYSTICK > > > + > > > +config SOC_IMX7D > > > > > > + bool "i.MX7 Dual support" > > > > > > + select PINCTRL_IMX7D > > > > > > + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 > > > > > > + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M > > > > > > + help > > > > > > + This enables support for Freescale i.MX7 Dual processor. > > > + > > > ?config SOC_VF610 > > > > > > ? bool "Vybrid Family VF610 support" > > > > > > ? select ARM_GIC if ARCH_MULTI_V7 > > > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > > > index 8ff71058207d..68640f100ef3 100644 > > > --- a/arch/arm/mach-imx/Makefile > > > +++ b/arch/arm/mach-imx/Makefile > > > @@ -80,7 +80,8 @@ obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o > > > ?obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o > > > ?obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o > > > ?obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o > > > -obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o > > > +obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o > > > +obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o > > > ? > > > ?ifeq ($(CONFIG_SUSPEND),y) > > > ?AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a > > > diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c > > > new file mode 100644 > > > index 000000000000..c36dea79aeb8 > > > --- /dev/null > > > +++ b/arch/arm/mach-imx/mach-imx7d-cm4.c > > > @@ -0,0 +1,21 @@ > > > +/* > > > + * Copyright 2017 Pengutronix > > > + * > > > + * This program is free software; you can redistribute it and/or modify > > > + * it under the terms of the GNU General Public License version 2 as > > > + * published by the Free Software Foundation. > > > + */ > > > + > > > +#include <linux/kernel.h> > > > +#include <asm/v7m.h> > > > +#include <asm/mach/arch.h> > > > + > > > +static const char * const imx7d_cm4_dt_compat[] __initconst = { > > > > > > + "fsl,imx7d-cm4", > > > > > > + NULL, > > > +}; > > > + > > > +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)") > > > > > > + .dt_compat = imx7d_cm4_dt_compat, > > > > > > + .restart = armv7m_restart, > > > +MACHINE_END > > > > > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1] ARM: imx: add imx7d-m4 2018-06-11 8:35 ` Lucas Stach @ 2018-06-11 11:48 ` Stefan Agner 2018-06-11 11:53 ` Oleksij Rempel 2018-06-11 12:01 ` Fabio Estevam 0 siblings, 2 replies; 13+ messages in thread From: Stefan Agner @ 2018-06-11 11:48 UTC (permalink / raw) To: linux-arm-kernel On 11.06.2018 10:35, Lucas Stach wrote: > Hi Shawn, > > Am Montag, den 11.06.2018, 16:20 +0800 schrieb Shawn Guo: >> On Mon, Jun 11, 2018 at 10:02:53AM +0200, Oleksij Rempel wrote: >> > Hi all, >> > >> > this patch was send 05.04.2018. Any comments? >> > >> > @Shawn, can you please take it? >> >> Honestly I'm not sure how useful it will be.??If we can have some i.MX >> developers ACK on it, I will be more comfortable to take it. > > This is all highly experimental and in PoC stage, but we see some value > in running a second Linux system on the M4 coprocessor. There are lots > of things that still need to be figured out, but we are working on this > from time to time when there are some hours to spare. > > This patch seems like a good step in the right direction and IMHO the > amount of code and changes is small enough to carry it upstream without > impacting anything else. I would be happy if this could be pulled in. I agree with Lucas here, this is rather minimal and not invasive. Out of interest, on what memory region do you run Linux? Do you use caches? In some experiments a while ago I noticed that only 2MiB/(or 4MiB) of DDR memory can use caches, which is somewhat tight to run Linux on. https://blog.printk.io/2017/05/i-mx-7-cortex-m4-memory-locations-and-performance/ -- Stefan >> > >> > On 05.04.2018 13:51, Oleksij Rempel wrote: >> > > Provide basic support for Cortex-M4 located on NXP iMX7D. >> > > This code was tested in combination with imx-rproc driver >> > > which will upload with specially formatted ELF image containing >> > > kernel, device and CPIO rootfs. >> > > >> > > > > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> >> > > --- >> > > ?arch/arm/boot/dts/Makefile?????????|??2 +- >> > > ?arch/arm/mach-imx/Kconfig??????????| 33 +++++++++++++++++++++------------ >> > > ?arch/arm/mach-imx/Makefile?????????|??3 ++- >> > > ?arch/arm/mach-imx/mach-imx7d-cm4.c | 21 +++++++++++++++++++++ >> > > ?4 files changed, 45 insertions(+), 14 deletions(-) >> > > ?create mode 100644 arch/arm/mach-imx/mach-imx7d-cm4.c >> > > >> > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> > > index 852452515bea..d49bb9a58aee 100644 >> > > --- a/arch/arm/boot/dts/Makefile >> > > +++ b/arch/arm/boot/dts/Makefile >> > > @@ -527,7 +527,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ >> > > > > > ? imx6ul-tx6ul-0011.dtb \ >> > > > > > ? imx6ul-tx6ul-mainboard.dtb \ >> > > > > > ? imx6ull-14x14-evk.dtb >> > > -dtb-$(CONFIG_SOC_IMX7D) += \ >> > > +dtb-$(CONFIG_SOC_IMX7D_CA7) += \ >> > > > > > ? imx7d-cl-som-imx7.dtb \ >> > > > > > ? imx7d-colibri-emmc-eval-v3.dtb \ >> > > > > > ? imx7d-colibri-eval-v3.dtb \ >> > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig >> > > index 782699e67600..101c8599d952 100644 >> > > --- a/arch/arm/mach-imx/Kconfig >> > > +++ b/arch/arm/mach-imx/Kconfig >> > > @@ -528,18 +528,6 @@ config SOC_IMX6UL >> > > > > > ? help >> > > > > > ? ??This enables support for Freescale i.MX6 UltraLite processor. >> > > ? >> > > -config SOC_IMX7D >> > > > > > - bool "i.MX7 Dual support" >> > > > > > - select PINCTRL_IMX7D >> > > > > > - select ARM_GIC >> > > > > > - select HAVE_ARM_ARCH_TIMER >> > > > > > - select HAVE_IMX_ANATOP >> > > > > > - select HAVE_IMX_MMDC >> > > > > > - select HAVE_IMX_SRC >> > > > > > - select IMX_GPCV2 >> > > > > > - help >> > > > > > - This enables support for Freescale i.MX7 Dual processor. >> > > - >> > > ?config SOC_LS1021A >> > > > > > ? bool "Freescale LS1021A support" >> > > > > > ? select ARM_GIC >> > > @@ -554,6 +542,27 @@ comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" >> > > ? >> > > ?if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M >> > > ? >> > > +config SOC_IMX7D_CA7 >> > > > > > + bool >> > > > > > + select ARM_GIC >> > > > > > + select HAVE_ARM_ARCH_TIMER >> > > > > > + select HAVE_IMX_ANATOP >> > > > > > + select HAVE_IMX_MMDC >> > > > > > + select HAVE_IMX_SRC >> > > > > > + select IMX_GPCV2 >> > > + >> > > +config SOC_IMX7D_CM4 >> > > > > > + bool >> > > > > > + select ARMV7M_SYSTICK >> > > + >> > > +config SOC_IMX7D >> > > > > > + bool "i.MX7 Dual support" >> > > > > > + select PINCTRL_IMX7D >> > > > > > + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 >> > > > > > + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M >> > > > > > + help >> > > > > > + This enables support for Freescale i.MX7 Dual processor. >> > > + >> > > ?config SOC_VF610 >> > > > > > ? bool "Vybrid Family VF610 support" >> > > > > > ? select ARM_GIC if ARCH_MULTI_V7 >> > > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile >> > > index 8ff71058207d..68640f100ef3 100644 >> > > --- a/arch/arm/mach-imx/Makefile >> > > +++ b/arch/arm/mach-imx/Makefile >> > > @@ -80,7 +80,8 @@ obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o >> > > ?obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o >> > > ?obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o >> > > ?obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o >> > > -obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o >> > > +obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o >> > > +obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o >> > > ? >> > > ?ifeq ($(CONFIG_SUSPEND),y) >> > > ?AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a >> > > diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c >> > > new file mode 100644 >> > > index 000000000000..c36dea79aeb8 >> > > --- /dev/null >> > > +++ b/arch/arm/mach-imx/mach-imx7d-cm4.c >> > > @@ -0,0 +1,21 @@ >> > > +/* >> > > + * Copyright 2017 Pengutronix >> > > + * >> > > + * This program is free software; you can redistribute it and/or modify >> > > + * it under the terms of the GNU General Public License version 2 as >> > > + * published by the Free Software Foundation. >> > > + */ >> > > + >> > > +#include <linux/kernel.h> >> > > +#include <asm/v7m.h> >> > > +#include <asm/mach/arch.h> >> > > + >> > > +static const char * const imx7d_cm4_dt_compat[] __initconst = { >> > > > > > + "fsl,imx7d-cm4", >> > > > > > + NULL, >> > > +}; >> > > + >> > > +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)") >> > > > > > + .dt_compat = imx7d_cm4_dt_compat, >> > > > > > + .restart = armv7m_restart, >> > > +MACHINE_END >> > > >> >> >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel at lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1] ARM: imx: add imx7d-m4 2018-06-11 11:48 ` Stefan Agner @ 2018-06-11 11:53 ` Oleksij Rempel 2018-06-11 12:41 ` Stefan Agner 2018-06-11 12:01 ` Fabio Estevam 1 sibling, 1 reply; 13+ messages in thread From: Oleksij Rempel @ 2018-06-11 11:53 UTC (permalink / raw) To: linux-arm-kernel On 11.06.2018 13:48, Stefan Agner wrote: > On 11.06.2018 10:35, Lucas Stach wrote: >> Hi Shawn, >> >> Am Montag, den 11.06.2018, 16:20 +0800 schrieb Shawn Guo: >>> On Mon, Jun 11, 2018 at 10:02:53AM +0200, Oleksij Rempel wrote: >>>> Hi all, >>>> >>>> this patch was send 05.04.2018. Any comments? >>>> >>>> @Shawn, can you please take it? >>> >>> Honestly I'm not sure how useful it will be.??If we can have some i.MX >>> developers ACK on it, I will be more comfortable to take it. >> >> This is all highly experimental and in PoC stage, but we see some value >> in running a second Linux system on the M4 coprocessor. There are lots >> of things that still need to be figured out, but we are working on this >> from time to time when there are some hours to spare. >> >> This patch seems like a good step in the right direction and IMHO the >> amount of code and changes is small enough to carry it upstream without >> impacting anything else. I would be happy if this could be pulled in. > > I agree with Lucas here, this is rather minimal and not invasive. > > > Out of interest, on what memory region do you run Linux? Do you use > caches? In some experiments a while ago I noticed that only 2MiB/(or > 4MiB) of DDR memory can use caches, which is somewhat tight to run Linux > on. > > https://blog.printk.io/2017/05/i-mx-7-cortex-m4-memory-locations-and-performance/ here is DT part for master system on Cortex A7 to run Linux on Cortex M4: memory { device_type = "memory"; reg = <0x80000000 0x40000000>; }; reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; m4_reserved_sysmem1: rproc at 88000000 { reg = <0x88000000 0x4000000>; no-map; }; /* not really needed node. used as example */ m4_reserved_sysmem2: rproc at 88080000 { reg = <0x8c000000 0x80000>; no-map; }; }; mailbox_test { compatible = "mailbox-test"; reg = <0x00900000 0x00020000>, <0x00920000 0x00020000>; mboxes = <&mu0a 0>, <&mu0a 0>; mbox-names = "tx", "rx"; }; }; /* node reserved for rproc */ &uart1 { assigned-clock-rates = <240000000>; status = "disabled"; }; &gpt2 { assigned-clock-rates = <24000000>; status = "disabled"; }; &mu0a { status = "okay"; #mbox-cells = <1>; }; &imx_rproc { status = "okay"; memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; remote-nodes = <&gpt2>, <&uart1>; }; > -- > Stefan > > >>>> >>>> On 05.04.2018 13:51, Oleksij Rempel wrote: >>>>> Provide basic support for Cortex-M4 located on NXP iMX7D. >>>>> This code was tested in combination with imx-rproc driver >>>>> which will upload with specially formatted ELF image containing >>>>> kernel, device and CPIO rootfs. >>>>> >>>>>>>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> >>>>> --- >>>>> ?arch/arm/boot/dts/Makefile?????????|??2 +- >>>>> ?arch/arm/mach-imx/Kconfig??????????| 33 +++++++++++++++++++++------------ >>>>> ?arch/arm/mach-imx/Makefile?????????|??3 ++- >>>>> ?arch/arm/mach-imx/mach-imx7d-cm4.c | 21 +++++++++++++++++++++ >>>>> ?4 files changed, 45 insertions(+), 14 deletions(-) >>>>> ?create mode 100644 arch/arm/mach-imx/mach-imx7d-cm4.c >>>>> >>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>>>> index 852452515bea..d49bb9a58aee 100644 >>>>> --- a/arch/arm/boot/dts/Makefile >>>>> +++ b/arch/arm/boot/dts/Makefile >>>>> @@ -527,7 +527,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ >>>>>>>> ? imx6ul-tx6ul-0011.dtb \ >>>>>>>> ? imx6ul-tx6ul-mainboard.dtb \ >>>>>>>> ? imx6ull-14x14-evk.dtb >>>>> -dtb-$(CONFIG_SOC_IMX7D) += \ >>>>> +dtb-$(CONFIG_SOC_IMX7D_CA7) += \ >>>>>>>> ? imx7d-cl-som-imx7.dtb \ >>>>>>>> ? imx7d-colibri-emmc-eval-v3.dtb \ >>>>>>>> ? imx7d-colibri-eval-v3.dtb \ >>>>> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig >>>>> index 782699e67600..101c8599d952 100644 >>>>> --- a/arch/arm/mach-imx/Kconfig >>>>> +++ b/arch/arm/mach-imx/Kconfig >>>>> @@ -528,18 +528,6 @@ config SOC_IMX6UL >>>>>>>> ? help >>>>>>>> ? ??This enables support for Freescale i.MX6 UltraLite processor. >>>>> ? >>>>> -config SOC_IMX7D >>>>>>>> - bool "i.MX7 Dual support" >>>>>>>> - select PINCTRL_IMX7D >>>>>>>> - select ARM_GIC >>>>>>>> - select HAVE_ARM_ARCH_TIMER >>>>>>>> - select HAVE_IMX_ANATOP >>>>>>>> - select HAVE_IMX_MMDC >>>>>>>> - select HAVE_IMX_SRC >>>>>>>> - select IMX_GPCV2 >>>>>>>> - help >>>>>>>> - This enables support for Freescale i.MX7 Dual processor. >>>>> - >>>>> ?config SOC_LS1021A >>>>>>>> ? bool "Freescale LS1021A support" >>>>>>>> ? select ARM_GIC >>>>> @@ -554,6 +542,27 @@ comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" >>>>> ? >>>>> ?if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M >>>>> ? >>>>> +config SOC_IMX7D_CA7 >>>>>>>> + bool >>>>>>>> + select ARM_GIC >>>>>>>> + select HAVE_ARM_ARCH_TIMER >>>>>>>> + select HAVE_IMX_ANATOP >>>>>>>> + select HAVE_IMX_MMDC >>>>>>>> + select HAVE_IMX_SRC >>>>>>>> + select IMX_GPCV2 >>>>> + >>>>> +config SOC_IMX7D_CM4 >>>>>>>> + bool >>>>>>>> + select ARMV7M_SYSTICK >>>>> + >>>>> +config SOC_IMX7D >>>>>>>> + bool "i.MX7 Dual support" >>>>>>>> + select PINCTRL_IMX7D >>>>>>>> + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 >>>>>>>> + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M >>>>>>>> + help >>>>>>>> + This enables support for Freescale i.MX7 Dual processor. >>>>> + >>>>> ?config SOC_VF610 >>>>>>>> ? bool "Vybrid Family VF610 support" >>>>>>>> ? select ARM_GIC if ARCH_MULTI_V7 >>>>> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile >>>>> index 8ff71058207d..68640f100ef3 100644 >>>>> --- a/arch/arm/mach-imx/Makefile >>>>> +++ b/arch/arm/mach-imx/Makefile >>>>> @@ -80,7 +80,8 @@ obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o >>>>> ?obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o >>>>> ?obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o >>>>> ?obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o >>>>> -obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o >>>>> +obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o >>>>> +obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o >>>>> ? >>>>> ?ifeq ($(CONFIG_SUSPEND),y) >>>>> ?AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a >>>>> diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c >>>>> new file mode 100644 >>>>> index 000000000000..c36dea79aeb8 >>>>> --- /dev/null >>>>> +++ b/arch/arm/mach-imx/mach-imx7d-cm4.c >>>>> @@ -0,0 +1,21 @@ >>>>> +/* >>>>> + * Copyright 2017 Pengutronix >>>>> + * >>>>> + * This program is free software; you can redistribute it and/or modify >>>>> + * it under the terms of the GNU General Public License version 2 as >>>>> + * published by the Free Software Foundation. >>>>> + */ >>>>> + >>>>> +#include <linux/kernel.h> >>>>> +#include <asm/v7m.h> >>>>> +#include <asm/mach/arch.h> >>>>> + >>>>> +static const char * const imx7d_cm4_dt_compat[] __initconst = { >>>>>>>> + "fsl,imx7d-cm4", >>>>>>>> + NULL, >>>>> +}; >>>>> + >>>>> +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)") >>>>>>>> + .dt_compat = imx7d_cm4_dt_compat, >>>>>>>> + .restart = armv7m_restart, >>>>> +MACHINE_END >>>>> >>> >>> >>> >>> >>> _______________________________________________ >>> linux-arm-kernel mailing list >>> linux-arm-kernel at lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel at lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180611/f252f40a/attachment.sig> ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1] ARM: imx: add imx7d-m4 2018-06-11 11:53 ` Oleksij Rempel @ 2018-06-11 12:41 ` Stefan Agner 2018-06-11 18:03 ` Oleksij Rempel 0 siblings, 1 reply; 13+ messages in thread From: Stefan Agner @ 2018-06-11 12:41 UTC (permalink / raw) To: linux-arm-kernel On 11.06.2018 13:53, Oleksij Rempel wrote: > On 11.06.2018 13:48, Stefan Agner wrote: >> On 11.06.2018 10:35, Lucas Stach wrote: >>> Hi Shawn, >>> >>> Am Montag, den 11.06.2018, 16:20 +0800 schrieb Shawn Guo: >>>> On Mon, Jun 11, 2018 at 10:02:53AM +0200, Oleksij Rempel wrote: >>>>> Hi all, >>>>> >>>>> this patch was send 05.04.2018. Any comments? >>>>> >>>>> @Shawn, can you please take it? >>>> >>>> Honestly I'm not sure how useful it will be.??If we can have some i.MX >>>> developers ACK on it, I will be more comfortable to take it. >>> >>> This is all highly experimental and in PoC stage, but we see some value >>> in running a second Linux system on the M4 coprocessor. There are lots >>> of things that still need to be figured out, but we are working on this >>> from time to time when there are some hours to spare. >>> >>> This patch seems like a good step in the right direction and IMHO the >>> amount of code and changes is small enough to carry it upstream without >>> impacting anything else. I would be happy if this could be pulled in. >> >> I agree with Lucas here, this is rather minimal and not invasive. >> >> >> Out of interest, on what memory region do you run Linux? Do you use >> caches? In some experiments a while ago I noticed that only 2MiB/(or >> 4MiB) of DDR memory can use caches, which is somewhat tight to run Linux >> on. >> >> https://blog.printk.io/2017/05/i-mx-7-cortex-m4-memory-locations-and-performance/ > > here is DT part for master system on Cortex A7 to run Linux on Cortex M4: > > memory { > device_type = "memory"; > reg = <0x80000000 0x40000000>; > }; > > reserved-memory { > #address-cells = <1>; > #size-cells = <1>; > ranges; > > m4_reserved_sysmem1: rproc at 88000000 { > reg = <0x88000000 0x4000000>; > no-map; > }; So I guess that is where Linux on the M4 goes? Afaik this is in the uncacheable area, so it is rather slow? -- Stefan > > /* not really needed node. used as example */ > m4_reserved_sysmem2: rproc at 88080000 { > reg = <0x8c000000 0x80000>; > no-map; > }; > }; > > mailbox_test { > compatible = "mailbox-test"; > reg = <0x00900000 0x00020000>, <0x00920000 > 0x00020000>; > mboxes = <&mu0a 0>, <&mu0a 0>; > mbox-names = "tx", "rx"; > }; > }; > > /* node reserved for rproc */ > &uart1 { > assigned-clock-rates = <240000000>; > status = "disabled"; > }; > > &gpt2 { > assigned-clock-rates = <24000000>; > status = "disabled"; > }; > > &mu0a { > status = "okay"; > #mbox-cells = <1>; > }; > > &imx_rproc { > status = "okay"; > memory-region = <&m4_reserved_sysmem1>, > <&m4_reserved_sysmem2>; > > remote-nodes = <&gpt2>, <&uart1>; > }; > > > >> -- >> Stefan >> >> >>>>> >>>>> On 05.04.2018 13:51, Oleksij Rempel wrote: >>>>>> Provide basic support for Cortex-M4 located on NXP iMX7D. >>>>>> This code was tested in combination with imx-rproc driver >>>>>> which will upload with specially formatted ELF image containing >>>>>> kernel, device and CPIO rootfs. >>>>>> >>>>>>>>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> >>>>>> --- >>>>>> ?arch/arm/boot/dts/Makefile?????????|??2 +- >>>>>> ?arch/arm/mach-imx/Kconfig??????????| 33 +++++++++++++++++++++------------ >>>>>> ?arch/arm/mach-imx/Makefile?????????|??3 ++- >>>>>> ?arch/arm/mach-imx/mach-imx7d-cm4.c | 21 +++++++++++++++++++++ >>>>>> ?4 files changed, 45 insertions(+), 14 deletions(-) >>>>>> ?create mode 100644 arch/arm/mach-imx/mach-imx7d-cm4.c >>>>>> >>>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>>>>> index 852452515bea..d49bb9a58aee 100644 >>>>>> --- a/arch/arm/boot/dts/Makefile >>>>>> +++ b/arch/arm/boot/dts/Makefile >>>>>> @@ -527,7 +527,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ >>>>>>>>> ? imx6ul-tx6ul-0011.dtb \ >>>>>>>>> ? imx6ul-tx6ul-mainboard.dtb \ >>>>>>>>> ? imx6ull-14x14-evk.dtb >>>>>> -dtb-$(CONFIG_SOC_IMX7D) += \ >>>>>> +dtb-$(CONFIG_SOC_IMX7D_CA7) += \ >>>>>>>>> ? imx7d-cl-som-imx7.dtb \ >>>>>>>>> ? imx7d-colibri-emmc-eval-v3.dtb \ >>>>>>>>> ? imx7d-colibri-eval-v3.dtb \ >>>>>> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig >>>>>> index 782699e67600..101c8599d952 100644 >>>>>> --- a/arch/arm/mach-imx/Kconfig >>>>>> +++ b/arch/arm/mach-imx/Kconfig >>>>>> @@ -528,18 +528,6 @@ config SOC_IMX6UL >>>>>>>>> ? help >>>>>>>>> ? ??This enables support for Freescale i.MX6 UltraLite processor. >>>>>> ? >>>>>> -config SOC_IMX7D >>>>>>>>> - bool "i.MX7 Dual support" >>>>>>>>> - select PINCTRL_IMX7D >>>>>>>>> - select ARM_GIC >>>>>>>>> - select HAVE_ARM_ARCH_TIMER >>>>>>>>> - select HAVE_IMX_ANATOP >>>>>>>>> - select HAVE_IMX_MMDC >>>>>>>>> - select HAVE_IMX_SRC >>>>>>>>> - select IMX_GPCV2 >>>>>>>>> - help >>>>>>>>> - This enables support for Freescale i.MX7 Dual processor. >>>>>> - >>>>>> ?config SOC_LS1021A >>>>>>>>> ? bool "Freescale LS1021A support" >>>>>>>>> ? select ARM_GIC >>>>>> @@ -554,6 +542,27 @@ comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" >>>>>> ? >>>>>> ?if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M >>>>>> ? >>>>>> +config SOC_IMX7D_CA7 >>>>>>>>> + bool >>>>>>>>> + select ARM_GIC >>>>>>>>> + select HAVE_ARM_ARCH_TIMER >>>>>>>>> + select HAVE_IMX_ANATOP >>>>>>>>> + select HAVE_IMX_MMDC >>>>>>>>> + select HAVE_IMX_SRC >>>>>>>>> + select IMX_GPCV2 >>>>>> + >>>>>> +config SOC_IMX7D_CM4 >>>>>>>>> + bool >>>>>>>>> + select ARMV7M_SYSTICK >>>>>> + >>>>>> +config SOC_IMX7D >>>>>>>>> + bool "i.MX7 Dual support" >>>>>>>>> + select PINCTRL_IMX7D >>>>>>>>> + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 >>>>>>>>> + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M >>>>>>>>> + help >>>>>>>>> + This enables support for Freescale i.MX7 Dual processor. >>>>>> + >>>>>> ?config SOC_VF610 >>>>>>>>> ? bool "Vybrid Family VF610 support" >>>>>>>>> ? select ARM_GIC if ARCH_MULTI_V7 >>>>>> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile >>>>>> index 8ff71058207d..68640f100ef3 100644 >>>>>> --- a/arch/arm/mach-imx/Makefile >>>>>> +++ b/arch/arm/mach-imx/Makefile >>>>>> @@ -80,7 +80,8 @@ obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o >>>>>> ?obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o >>>>>> ?obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o >>>>>> ?obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o >>>>>> -obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o >>>>>> +obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o >>>>>> +obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o >>>>>> ? >>>>>> ?ifeq ($(CONFIG_SUSPEND),y) >>>>>> ?AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a >>>>>> diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c >>>>>> new file mode 100644 >>>>>> index 000000000000..c36dea79aeb8 >>>>>> --- /dev/null >>>>>> +++ b/arch/arm/mach-imx/mach-imx7d-cm4.c >>>>>> @@ -0,0 +1,21 @@ >>>>>> +/* >>>>>> + * Copyright 2017 Pengutronix >>>>>> + * >>>>>> + * This program is free software; you can redistribute it and/or modify >>>>>> + * it under the terms of the GNU General Public License version 2 as >>>>>> + * published by the Free Software Foundation. >>>>>> + */ >>>>>> + >>>>>> +#include <linux/kernel.h> >>>>>> +#include <asm/v7m.h> >>>>>> +#include <asm/mach/arch.h> >>>>>> + >>>>>> +static const char * const imx7d_cm4_dt_compat[] __initconst = { >>>>>>>>> + "fsl,imx7d-cm4", >>>>>>>>> + NULL, >>>>>> +}; >>>>>> + >>>>>> +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)") >>>>>>>>> + .dt_compat = imx7d_cm4_dt_compat, >>>>>>>>> + .restart = armv7m_restart, >>>>>> +MACHINE_END >>>>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> linux-arm-kernel mailing list >>>> linux-arm-kernel at lists.infradead.org >>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >>> >>> _______________________________________________ >>> linux-arm-kernel mailing list >>> linux-arm-kernel at lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >> >> > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1] ARM: imx: add imx7d-m4 2018-06-11 12:41 ` Stefan Agner @ 2018-06-11 18:03 ` Oleksij Rempel 0 siblings, 0 replies; 13+ messages in thread From: Oleksij Rempel @ 2018-06-11 18:03 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jun 11, 2018 at 02:41:29PM +0200, Stefan Agner wrote: > On 11.06.2018 13:53, Oleksij Rempel wrote: > > On 11.06.2018 13:48, Stefan Agner wrote: > >> On 11.06.2018 10:35, Lucas Stach wrote: > >>> Hi Shawn, > >>> > >>> Am Montag, den 11.06.2018, 16:20 +0800 schrieb Shawn Guo: > >>>> On Mon, Jun 11, 2018 at 10:02:53AM +0200, Oleksij Rempel wrote: > >>>>> Hi all, > >>>>> > >>>>> this patch was send 05.04.2018. Any comments? > >>>>> > >>>>> @Shawn, can you please take it? > >>>> > >>>> Honestly I'm not sure how useful it will be.??If we can have some i.MX > >>>> developers ACK on it, I will be more comfortable to take it. > >>> > >>> This is all highly experimental and in PoC stage, but we see some value > >>> in running a second Linux system on the M4 coprocessor. There are lots > >>> of things that still need to be figured out, but we are working on this > >>> from time to time when there are some hours to spare. > >>> > >>> This patch seems like a good step in the right direction and IMHO the > >>> amount of code and changes is small enough to carry it upstream without > >>> impacting anything else. I would be happy if this could be pulled in. > >> > >> I agree with Lucas here, this is rather minimal and not invasive. > >> > >> > >> Out of interest, on what memory region do you run Linux? Do you use > >> caches? In some experiments a while ago I noticed that only 2MiB/(or > >> 4MiB) of DDR memory can use caches, which is somewhat tight to run Linux > >> on. > >> > >> https://blog.printk.io/2017/05/i-mx-7-cortex-m4-memory-locations-and-performance/ > > > > here is DT part for master system on Cortex A7 to run Linux on Cortex M4: > > > > memory { > > device_type = "memory"; > > reg = <0x80000000 0x40000000>; > > }; > > > > reserved-memory { > > #address-cells = <1>; > > #size-cells = <1>; > > ranges; > > > > m4_reserved_sysmem1: rproc at 88000000 { > > reg = <0x88000000 0x4000000>; > > no-map; > > }; > > So I guess that is where Linux on the M4 goes? Afaik this is in the > uncacheable area, so it is rather slow? I didn't made any performance optimization or comparison. -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 488 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180611/ccc21651/attachment.sig> ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1] ARM: imx: add imx7d-m4 2018-06-11 11:48 ` Stefan Agner 2018-06-11 11:53 ` Oleksij Rempel @ 2018-06-11 12:01 ` Fabio Estevam 1 sibling, 0 replies; 13+ messages in thread From: Fabio Estevam @ 2018-06-11 12:01 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jun 11, 2018 at 8:48 AM, Stefan Agner <stefan@agner.ch> wrote: > On 11.06.2018 10:35, Lucas Stach wrote: >> Hi Shawn, >> >> Am Montag, den 11.06.2018, 16:20 +0800 schrieb Shawn Guo: >>> On Mon, Jun 11, 2018 at 10:02:53AM +0200, Oleksij Rempel wrote: >>> > Hi all, >>> > >>> > this patch was send 05.04.2018. Any comments? >>> > >>> > @Shawn, can you please take it? >>> >>> Honestly I'm not sure how useful it will be. If we can have some i.MX >>> developers ACK on it, I will be more comfortable to take it. >> >> This is all highly experimental and in PoC stage, but we see some value >> in running a second Linux system on the M4 coprocessor. There are lots >> of things that still need to be figured out, but we are working on this >> from time to time when there are some hours to spare. >> >> This patch seems like a good step in the right direction and IMHO the >> amount of code and changes is small enough to carry it upstream without >> impacting anything else. I would be happy if this could be pulled in. > > I agree with Lucas here, this is rather minimal and not invasive. Agreed here as well. It would be nice if we could start improving the CortexM4 support in general with mainline. Thanks ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1] ARM: imx: add imx7d-m4 2018-04-05 11:51 [PATCH v1] ARM: imx: add imx7d-m4 Oleksij Rempel 2018-06-11 8:02 ` Oleksij Rempel @ 2018-06-17 6:44 ` Shawn Guo 2018-07-02 6:01 ` Oleksij Rempel 2018-06-17 6:46 ` Shawn Guo 2 siblings, 1 reply; 13+ messages in thread From: Shawn Guo @ 2018-06-17 6:44 UTC (permalink / raw) To: linux-arm-kernel On Thu, Apr 05, 2018 at 01:51:34PM +0200, Oleksij Rempel wrote: > Provide basic support for Cortex-M4 located on NXP iMX7D. > This code was tested in combination with imx-rproc driver > which will upload with specially formatted ELF image containing > kernel, device and CPIO rootfs. > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > arch/arm/boot/dts/Makefile | 2 +- > arch/arm/mach-imx/Kconfig | 33 +++++++++++++++++++++------------ > arch/arm/mach-imx/Makefile | 3 ++- > arch/arm/mach-imx/mach-imx7d-cm4.c | 21 +++++++++++++++++++++ > 4 files changed, 45 insertions(+), 14 deletions(-) > create mode 100644 arch/arm/mach-imx/mach-imx7d-cm4.c > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 852452515bea..d49bb9a58aee 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -527,7 +527,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ > imx6ul-tx6ul-0011.dtb \ > imx6ul-tx6ul-mainboard.dtb \ > imx6ull-14x14-evk.dtb > -dtb-$(CONFIG_SOC_IMX7D) += \ > +dtb-$(CONFIG_SOC_IMX7D_CA7) += \ I would keep this unchanged, and have future IMX7D_CM4 DTBs just covered by CONFIG_SOC_IMX7D as well. Shawn > imx7d-cl-som-imx7.dtb \ > imx7d-colibri-emmc-eval-v3.dtb \ > imx7d-colibri-eval-v3.dtb \ > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 782699e67600..101c8599d952 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -528,18 +528,6 @@ config SOC_IMX6UL > help > This enables support for Freescale i.MX6 UltraLite processor. > > -config SOC_IMX7D > - bool "i.MX7 Dual support" > - select PINCTRL_IMX7D > - select ARM_GIC > - select HAVE_ARM_ARCH_TIMER > - select HAVE_IMX_ANATOP > - select HAVE_IMX_MMDC > - select HAVE_IMX_SRC > - select IMX_GPCV2 > - help > - This enables support for Freescale i.MX7 Dual processor. > - > config SOC_LS1021A > bool "Freescale LS1021A support" > select ARM_GIC > @@ -554,6 +542,27 @@ comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" > > if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M > > +config SOC_IMX7D_CA7 > + bool > + select ARM_GIC > + select HAVE_ARM_ARCH_TIMER > + select HAVE_IMX_ANATOP > + select HAVE_IMX_MMDC > + select HAVE_IMX_SRC > + select IMX_GPCV2 > + > +config SOC_IMX7D_CM4 > + bool > + select ARMV7M_SYSTICK > + > +config SOC_IMX7D > + bool "i.MX7 Dual support" > + select PINCTRL_IMX7D > + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 > + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M > + help > + This enables support for Freescale i.MX7 Dual processor. > + > config SOC_VF610 > bool "Vybrid Family VF610 support" > select ARM_GIC if ARCH_MULTI_V7 > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > index 8ff71058207d..68640f100ef3 100644 > --- a/arch/arm/mach-imx/Makefile > +++ b/arch/arm/mach-imx/Makefile > @@ -80,7 +80,8 @@ obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o > obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o > obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o > obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o > -obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o > +obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o > +obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o > > ifeq ($(CONFIG_SUSPEND),y) > AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a > diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c > new file mode 100644 > index 000000000000..c36dea79aeb8 > --- /dev/null > +++ b/arch/arm/mach-imx/mach-imx7d-cm4.c > @@ -0,0 +1,21 @@ > +/* > + * Copyright 2017 Pengutronix > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/kernel.h> > +#include <asm/v7m.h> > +#include <asm/mach/arch.h> > + > +static const char * const imx7d_cm4_dt_compat[] __initconst = { > + "fsl,imx7d-cm4", > + NULL, > +}; > + > +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)") > + .dt_compat = imx7d_cm4_dt_compat, > + .restart = armv7m_restart, > +MACHINE_END > -- > 2.16.1 > ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1] ARM: imx: add imx7d-m4 2018-06-17 6:44 ` Shawn Guo @ 2018-07-02 6:01 ` Oleksij Rempel 0 siblings, 0 replies; 13+ messages in thread From: Oleksij Rempel @ 2018-07-02 6:01 UTC (permalink / raw) To: linux-arm-kernel On 17.06.2018 08:44, Shawn Guo wrote: > On Thu, Apr 05, 2018 at 01:51:34PM +0200, Oleksij Rempel wrote: >> Provide basic support for Cortex-M4 located on NXP iMX7D. >> This code was tested in combination with imx-rproc driver >> which will upload with specially formatted ELF image containing >> kernel, device and CPIO rootfs. >> >> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> >> --- >> arch/arm/boot/dts/Makefile | 2 +- >> arch/arm/mach-imx/Kconfig | 33 +++++++++++++++++++++------------ >> arch/arm/mach-imx/Makefile | 3 ++- >> arch/arm/mach-imx/mach-imx7d-cm4.c | 21 +++++++++++++++++++++ >> 4 files changed, 45 insertions(+), 14 deletions(-) >> create mode 100644 arch/arm/mach-imx/mach-imx7d-cm4.c >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 852452515bea..d49bb9a58aee 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -527,7 +527,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ >> imx6ul-tx6ul-0011.dtb \ >> imx6ul-tx6ul-mainboard.dtb \ >> imx6ull-14x14-evk.dtb >> -dtb-$(CONFIG_SOC_IMX7D) += \ >> +dtb-$(CONFIG_SOC_IMX7D_CA7) += \ > > I would keep this unchanged, and have future IMX7D_CM4 DTBs just > covered by CONFIG_SOC_IMX7D as well. ok, done > Shawn > >> imx7d-cl-som-imx7.dtb \ >> imx7d-colibri-emmc-eval-v3.dtb \ >> imx7d-colibri-eval-v3.dtb \ >> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig >> index 782699e67600..101c8599d952 100644 >> --- a/arch/arm/mach-imx/Kconfig >> +++ b/arch/arm/mach-imx/Kconfig >> @@ -528,18 +528,6 @@ config SOC_IMX6UL >> help >> This enables support for Freescale i.MX6 UltraLite processor. >> >> -config SOC_IMX7D >> - bool "i.MX7 Dual support" >> - select PINCTRL_IMX7D >> - select ARM_GIC >> - select HAVE_ARM_ARCH_TIMER >> - select HAVE_IMX_ANATOP >> - select HAVE_IMX_MMDC >> - select HAVE_IMX_SRC >> - select IMX_GPCV2 >> - help >> - This enables support for Freescale i.MX7 Dual processor. >> - >> config SOC_LS1021A >> bool "Freescale LS1021A support" >> select ARM_GIC >> @@ -554,6 +542,27 @@ comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" >> >> if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M >> >> +config SOC_IMX7D_CA7 >> + bool >> + select ARM_GIC >> + select HAVE_ARM_ARCH_TIMER >> + select HAVE_IMX_ANATOP >> + select HAVE_IMX_MMDC >> + select HAVE_IMX_SRC >> + select IMX_GPCV2 >> + >> +config SOC_IMX7D_CM4 >> + bool >> + select ARMV7M_SYSTICK >> + >> +config SOC_IMX7D >> + bool "i.MX7 Dual support" >> + select PINCTRL_IMX7D >> + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 >> + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M >> + help >> + This enables support for Freescale i.MX7 Dual processor. >> + >> config SOC_VF610 >> bool "Vybrid Family VF610 support" >> select ARM_GIC if ARCH_MULTI_V7 >> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile >> index 8ff71058207d..68640f100ef3 100644 >> --- a/arch/arm/mach-imx/Makefile >> +++ b/arch/arm/mach-imx/Makefile >> @@ -80,7 +80,8 @@ obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o >> obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o >> obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o >> obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o >> -obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o >> +obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o >> +obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o >> >> ifeq ($(CONFIG_SUSPEND),y) >> AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a >> diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c >> new file mode 100644 >> index 000000000000..c36dea79aeb8 >> --- /dev/null >> +++ b/arch/arm/mach-imx/mach-imx7d-cm4.c >> @@ -0,0 +1,21 @@ >> +/* >> + * Copyright 2017 Pengutronix >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include <linux/kernel.h> >> +#include <asm/v7m.h> >> +#include <asm/mach/arch.h> >> + >> +static const char * const imx7d_cm4_dt_compat[] __initconst = { >> + "fsl,imx7d-cm4", >> + NULL, >> +}; >> + >> +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)") >> + .dt_compat = imx7d_cm4_dt_compat, >> + .restart = armv7m_restart, >> +MACHINE_END >> -- >> 2.16.1 >> > -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180702/3da5e6fb/attachment.sig> ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1] ARM: imx: add imx7d-m4 2018-04-05 11:51 [PATCH v1] ARM: imx: add imx7d-m4 Oleksij Rempel 2018-06-11 8:02 ` Oleksij Rempel 2018-06-17 6:44 ` Shawn Guo @ 2018-06-17 6:46 ` Shawn Guo 2018-07-02 6:02 ` Oleksij Rempel 2 siblings, 1 reply; 13+ messages in thread From: Shawn Guo @ 2018-06-17 6:46 UTC (permalink / raw) To: linux-arm-kernel On Thu, Apr 05, 2018 at 01:51:34PM +0200, Oleksij Rempel wrote: > Provide basic support for Cortex-M4 located on NXP iMX7D. > This code was tested in combination with imx-rproc driver > which will upload with specially formatted ELF image containing > kernel, device and CPIO rootfs. > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Can we make the patch subject a bit more complete, at least like "ARM: imx: add imx7d-m4 support" or something? Shawn ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1] ARM: imx: add imx7d-m4 2018-06-17 6:46 ` Shawn Guo @ 2018-07-02 6:02 ` Oleksij Rempel 0 siblings, 0 replies; 13+ messages in thread From: Oleksij Rempel @ 2018-07-02 6:02 UTC (permalink / raw) To: linux-arm-kernel On 17.06.2018 08:46, Shawn Guo wrote: > On Thu, Apr 05, 2018 at 01:51:34PM +0200, Oleksij Rempel wrote: >> Provide basic support for Cortex-M4 located on NXP iMX7D. >> This code was tested in combination with imx-rproc driver >> which will upload with specially formatted ELF image containing >> kernel, device and CPIO rootfs. >> >> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > > Can we make the patch subject a bit more complete, at least like > "ARM: imx: add imx7d-m4 support" or something? ok. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180702/bebf1ca0/attachment.sig> ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2018-07-02 6:02 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-04-05 11:51 [PATCH v1] ARM: imx: add imx7d-m4 Oleksij Rempel 2018-06-11 8:02 ` Oleksij Rempel 2018-06-11 8:20 ` Shawn Guo 2018-06-11 8:35 ` Lucas Stach 2018-06-11 11:48 ` Stefan Agner 2018-06-11 11:53 ` Oleksij Rempel 2018-06-11 12:41 ` Stefan Agner 2018-06-11 18:03 ` Oleksij Rempel 2018-06-11 12:01 ` Fabio Estevam 2018-06-17 6:44 ` Shawn Guo 2018-07-02 6:01 ` Oleksij Rempel 2018-06-17 6:46 ` Shawn Guo 2018-07-02 6:02 ` Oleksij Rempel
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.