* [U-Boot] [PATCH] ARM: dts: rmobile: Move the PHY reset GPIO back
@ 2018-06-17 7:03 Marek Vasut
0 siblings, 0 replies; only message in thread
From: Marek Vasut @ 2018-06-17 7:03 UTC (permalink / raw)
To: u-boot
The current state of RAVB driver expects the PHY reset GPIO in the
RAVB mode, move it back from the PHY node to avoid breakage.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
arch/arm/dts/salvator-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi
index 514c57b2c8..6b176ea36a 100644
--- a/arch/arm/dts/salvator-common.dtsi
+++ b/arch/arm/dts/salvator-common.dtsi
@@ -257,6 +257,7 @@
pinctrl-names = "default";
phy-handle = <&phy0>;
phy-mode = "rgmii-txid";
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
status = "okay";
phy0: ethernet-phy at 0 {
@@ -264,7 +265,6 @@
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
};
};
--
2.17.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2018-06-17 7:03 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-17 7:03 [U-Boot] [PATCH] ARM: dts: rmobile: Move the PHY reset GPIO back Marek Vasut
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.