From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org,
Andre Przywara <andre.przywara@arm.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH 1/5] dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
Date: Wed, 20 Jun 2018 13:15:36 +0800 [thread overview]
Message-ID: <20180620051540.25617-2-wens@csie.org> (raw)
In-Reply-To: <20180620051540.25617-1-wens@csie.org>
The AXP806 has three operation modes:
- master mode: The PMIC is the first or only AXP PMIC in the system,
but is not in charge of power management, i.e. only
provides regulator functions.
- slave mode: The PMIC is the second AXP PMIC in the system, chained
to the first, or master, one.
- self-working mode: The PMIC is the only AXP PMIC in the system, and
is in charge of power sequencing.
The functional differences between these modes can be found in the
"Control and Operation" chapter of the AXP806 (in Chinese) and AXP805
(in English) datasheets. These include how the PMIC responds to external
signals, whether it takes an external voltage reference or uses its own,
and whether the EN/PWRON pin functions as an enable switch or power button.
We already support both slave and master mode. This patch adds a property
for describing the self-working mode, and reworks the description for
the mode properties.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
Documentation/devicetree/bindings/mfd/axp20x.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index d1762f3b30af..eaaf79c01e1e 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -45,8 +45,11 @@ Optional properties:
board is driving OTG VBus or not.
(axp221 / axp223 / axp803/ axp813 only)
-- x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is
- wired for master mode. The default is slave mode.
+- x-powers,self-working-mode and
+ x-powers,master-mode: Boolean (axp806 only). Set either of these when the
+ PMIC is wired for self-working mode or master mode.
+ If neither is set then slave mode is assumed.
+ This corresponds to how the MODESET pin is wired.
- <input>-supply: a phandle to the regulator supply node. May be omitted if
inputs are unregulated, such as using the IPSOUT output
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
Date: Wed, 20 Jun 2018 13:15:36 +0800 [thread overview]
Message-ID: <20180620051540.25617-2-wens@csie.org> (raw)
In-Reply-To: <20180620051540.25617-1-wens@csie.org>
The AXP806 has three operation modes:
- master mode: The PMIC is the first or only AXP PMIC in the system,
but is not in charge of power management, i.e. only
provides regulator functions.
- slave mode: The PMIC is the second AXP PMIC in the system, chained
to the first, or master, one.
- self-working mode: The PMIC is the only AXP PMIC in the system, and
is in charge of power sequencing.
The functional differences between these modes can be found in the
"Control and Operation" chapter of the AXP806 (in Chinese) and AXP805
(in English) datasheets. These include how the PMIC responds to external
signals, whether it takes an external voltage reference or uses its own,
and whether the EN/PWRON pin functions as an enable switch or power button.
We already support both slave and master mode. This patch adds a property
for describing the self-working mode, and reworks the description for
the mode properties.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
Documentation/devicetree/bindings/mfd/axp20x.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index d1762f3b30af..eaaf79c01e1e 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -45,8 +45,11 @@ Optional properties:
board is driving OTG VBus or not.
(axp221 / axp223 / axp803/ axp813 only)
-- x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is
- wired for master mode. The default is slave mode.
+- x-powers,self-working-mode and
+ x-powers,master-mode: Boolean (axp806 only). Set either of these when the
+ PMIC is wired for self-working mode or master mode.
+ If neither is set then slave mode is assumed.
+ This corresponds to how the MODESET pin is wired.
- <input>-supply: a phandle to the regulator supply node. May be omitted if
inputs are unregulated, such as using the IPSOUT output
--
2.17.1
next prev parent reply other threads:[~2018-06-20 5:15 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-20 5:15 [PATCH 0/5] arm64: allwinner: h6: Enable AXP805 PMIC on Pine H64 Chen-Yu Tsai
2018-06-20 5:15 ` Chen-Yu Tsai
2018-06-20 5:15 ` Chen-Yu Tsai [this message]
2018-06-20 5:15 ` [PATCH 1/5] dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 Chen-Yu Tsai
2018-06-26 21:41 ` Rob Herring
2018-06-26 21:41 ` Rob Herring
2018-07-04 7:29 ` Lee Jones
2018-07-04 7:29 ` Lee Jones
2018-06-20 5:15 ` [PATCH 2/5] mfd: axp20x: Add self-working mode support " Chen-Yu Tsai
2018-06-20 5:15 ` Chen-Yu Tsai
2018-07-04 7:33 ` Lee Jones
2018-07-04 7:33 ` Lee Jones
2018-06-20 5:15 ` [PATCH 3/5] mfd: axp20x: Support AXP806 in I2C mode Chen-Yu Tsai
2018-06-20 5:15 ` Chen-Yu Tsai
2018-07-04 7:33 ` Lee Jones
2018-07-04 7:33 ` Lee Jones
2018-06-20 5:15 ` [PATCH 4/5] arm64: dts: allwinner: h6: Use macros for R_CCU clock and reset indices Chen-Yu Tsai
2018-06-20 5:15 ` Chen-Yu Tsai
2018-06-20 13:11 ` Icenowy Zheng
2018-06-20 13:11 ` Icenowy Zheng
2018-06-20 13:46 ` Chen-Yu Tsai
2018-06-20 13:46 ` Chen-Yu Tsai
2018-06-20 5:15 ` [PATCH 5/5] arm64: dts: allwinner: h6: enable AXP805 PMIC on Pine H64 Chen-Yu Tsai
2018-06-20 5:15 ` Chen-Yu Tsai
2018-06-26 0:49 ` Icenowy Zheng
2018-06-26 0:49 ` Icenowy Zheng
2018-06-26 3:46 ` Chen-Yu Tsai
2018-06-26 3:46 ` Chen-Yu Tsai
2018-06-26 5:14 ` [PATCH 0/5] arm64: allwinner: h6: Enable " Icenowy Zheng
2018-06-26 5:14 ` Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180620051540.25617-2-wens@csie.org \
--to=wens@csie.org \
--cc=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.