[LTP] runltp fails with Buildroot

[LTP] runltp fails with Buildroot

[umeshyv]

Hi

I compiled  LTP package with Buildroot for Raspberry target, when I execute
./runltp it fails. Could anyone suggest on this.


Thanks
​Umesh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linux.it/pipermail/ltp/attachments/20180622/39e53cd9/attachment.html>

[LTP] runltp fails with Buildroot

[Cyril Hrubis]

Hi!
> I compiled  LTP package with Buildroot for Raspberry target, when I execute
> ./runltp it fails. Could anyone suggest on this.

Can you please share the steps you did and the error trace you get?

Without that we cannot help you at all.

-- 
Cyril Hrubis
chrubis@suse.cz

[LTP] runltp fails with Buildroot

[umeshyv]

Hi

Now I am able to run runltp on my raspberry pi target. I have added a new
i2c test case under testcases folder, please help me how could I run this
test alone with runltp and email the result.

I executed as follows

. /runltp -a <email > -p -o output.log <path to LTP in the
target>/testcases/bin/<testname>

When I executed the above all the test are running.

Also how could I add to runtest and runtestltplite.sh

Please suggest.

Thanks
UmaMahesh


On Mon 25 Jun, 2018, 19:12 Cyril Hrubis, <chrubis@suse.cz> wrote:

> Hi!
> > I compiled  LTP package with Buildroot for Raspberry target, when I
> execute
> > ./runltp it fails. Could anyone suggest on this.
>
> Can you please share the steps you did and the error trace you get?
>
> Without that we cannot help you at all.
>
> --
> Cyril Hrubis
> chrubis@suse.cz
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linux.it/pipermail/ltp/attachments/20180626/d26a69a9/attachment.html>

[LTP] runltp fails with Buildroot

[Cyril Hrubis]

Hi!
> Now I am able to run runltp on my raspberry pi target. I have added a new
> i2c test case under testcases folder, please help me how could I run this
> test alone with runltp and email the result.
> 
> I executed as follows
> 
> . /runltp -a <email > -p -o output.log <path to LTP in the
> target>/testcases/bin/<testname>
> 
> When I executed the above all the test are running.

You need to create a runtest entry/file under the runtest directory,
then you can select which runtest files to execute with runltp -f.

-- 
Cyril Hrubis
chrubis@suse.cz

[LTP] runltp fails with Buildroot

[Cyril Hrubis]

Hi!
> As suggested runtest was updated and output is attached for your reference
> and at the end of the test it says reports cannot be mailed.

Can you please send text logs as a text next time?

You are wasting a traffic and time for everyone with screenshots.

> Is there any documentation how runtest is executed.
> 
> Please suggest.

The runtest file format is explained in the C test case tutorial:

https://github.com/linux-test-project/ltp/wiki/C-Test-Case-Tutorial#3-create-the-test-skeleton

-- 
Cyril Hrubis
chrubis@suse.cz

[LTP] runltp fails with Buildroot

[umeshyv]

Hi All,
Please find below complete log of my previous screenshots,

# ./runltp -a [  769.538489] smsc95xx 1-1.1:1.0 eth0: link up,
100Mbps, full-duplex, lpa 0x41E1
[  769.551566] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
^C
# ./runltp -a umeshyv@gmail.com -p -o output.log -f sensor_test
INFO: creating /usr/lib/ltp-testsuite/output directory
INFO: creating /usr/lib/ltp-testsuite/results directory
Checking for required user/group ids

'nobody' user id and group found.
'bin' user id and group found.
'daemon' user id and group found.
Users group found.
Sys group found.
Required users/groups exist.
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

NAME=Buildroot
VERSION=2018.02.1
ID=buildroot
VERSION_ID=2018.02.1
PRETTY_NAME="Buildroot 2018.02.1"
Linux buildroot 4.14.39-v7 #7 SMP Mon Jun 4 12:10:05 IST 2018 armv7l GNU/Linux

Gnu C
util-linux             version'
util-linux             call binary.
util-linux
util-linux             n] DEVICE
util-linux
util-linux             Format floppy disk
util-linux
util-linux             n        Don't verify after format
mount                  /dev/root on / type ext4 (rw,relatime,data=ordered)
mount                  devtmpfs on /dev type devtmpfs
(rw,relatime,size=457936k,nr_inodes=114484,mode=755)
mount                  proc on /proc type proc (rw,relatime)
mount                  devpts on /dev/pts type devpts
(rw,relatime,gid=5,mode=620,ptmxmode=666)
mount                  tmpfs on /dev/shm type tmpfs (rw,relatime,mode=777)
mount                  tmpfs on /tmp type tmpfs (rw,relatime)
mount                  tmpfs on /run type tmpfs
(rw,nosuid,nodev,relatime,mode=755)
mount                  sysfs on /sys type sysfs (rw,relatime)
modutils               directory
/bin/sh: is setuid
Linux C Library        1.0.28
Linux C Library        uClibc.so.1
-v: No such file or directory
Procps                 `--version'
iproute2               binary.
iputils                V
Kbd                    73:
Sh-utils               --v
Modules Loaded         ipv6

free reports:
             total       used       free     shared    buffers     cached
Mem:        925092      21064     904028         52        888       3256
-/+ buffers/cache:      16920     908172
Swap:            0          0          0

/proc/cpuinfo
processor       : 0
model name      : ARMv7 Processor rev 5 (v7l)
BogoMIPS        : 38.40
Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0xc07
CPU revision    : 5

processor       : 1
model name      : ARMv7 Processor rev 5 (v7l)
BogoMIPS        : 38.40
Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0xc07
CPU revision    : 5

processor       : 2
model name      : ARMv7 Processor rev 5 (v7l)
BogoMIPS        : 38.40
Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0xc07
CPU revision    : 5

processor       : 3
model name      : ARMv7 Processor rev 5 (v7l)
BogoMIPS        : 38.40
Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0xc07
CPU revision    : 5

Hardware        : BCM2835
Revision        : a21041
Serial          : 0000000093e3c1dd
no big block device was specified on commandline.
Tests which require a big block device are disabled.
You can specify it with option -z
COMMAND:    /usr/lib/ltp-testsuite/bin/ltp-pan   -e -S   -a 145     -n
145 -p -f /tmp/ltp-XXXX9KSUqp/alltests -l
/usr/lib/ltp-testsuite/results/LTP_Rf
LOG File: /usr/lib/ltp-testsuite/results/LTP_RUN_ON-1970_01_01-00h_14m_06s.log
OUTPUT File: /usr/lib/ltp-testsuite/output/output.log
FAILED COMMAND File: /usr/lib/ltp-testsuite/output/LTP_RUN_ON-output.log.failed
TCONF COMMAND File: /usr/lib/ltp-testsuite/output/LTP_RUN_ON-output.log.tconf
Running tests.......
Segmentation fault
INFO: ltp-pan reported some tests FAIL
LTP Version: 20180118
sh: !: unknown operand
tar: removing leading '/' from member names
Created TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar
successfully, added /usr/lib/ltp-testsuite/output
tar: invalid option -- u
BusyBox v1.27.2 (2018-05-03 22:47:13 IST) multi-call binary.

Usage: tar -[cxthvO] [-X FILE] [-T FILE] [-f TARFILE] [-C DIR] [FILE]...

Create, extract, or list files from a tar file

Operation:
        c       Create
        x       Extract
        t       List
        f       Name of TARFILE ('-' for stdin/out)
        C       Change to DIR before operation
        v       Verbose
        O       Extract to stdout
        h       Follow symlinks
        exclude File to exclude
        X       File with names to exclude
        T       File with names to include
Cannot Update TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar
for adding /usr/lib/ltp-testsuite/results
Gunzipped TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar
Starting mailing reports to: umeshyv@gmail.com, file:
./LTP_RUN_201801181970_01_01-00h_14m_06s.tar.gz
./runltp: line 1043: mail: not found
Reports cannot be mailed to: umeshyv@gmail.com

       ###############################################################

            Done executing testcases.
            LTP Version:  20180118
       ###############################################################

#

My LTP test output

# ./sensor_test
sample01    1  TPASS  :  I2C DRIVER OPEN TEST Passed
---------LTP READ TEST----------
Contents of WHO AM I Register bd
sample01    2  TPASS  :  I2C READ TEST Passed
----------LTP WRITE TEST--------
sample01    3  TPASS  :  I2C WRITE TEST Passed
--------SENSOR TEST OUTPUT------
temp low 1
temp high 1
temp out 257
Temperature(without calibration)
 = 43.04°C
sample01    0  TINFO  :  I2C Tests Done!


Thanks
Umamahesh




On Wed 27 Jun, 2018, 14:08 Cyril Hrubis, <chrubis@suse.cz> wrote:
>
> Hi!
> > As suggested runtest was updated and output is attached for your reference
> > and at the end of the test it says reports cannot be mailed.
>
> Can you please send text logs as a text next time?
>
> You are wasting a traffic and time for everyone with screenshots.
>
> > Is there any documentation how runtest is executed.
> >
> > Please suggest.
>
> The runtest file format is explained in the C test case tutorial:
>
> https://github.com/linux-test-project/ltp/wiki/C-Test-Case-Tutorial#3-create-the-test-skeleton
>
> --
> Cyril Hrubis
> chrubis@suse.cz

[LTP] runltp fails with Buildroot

[umeshyv]

Any suggestions on my previous mail posted with runltp logs.

On Thu 28 Jun, 2018, 00:35 umeshyv, <umeshyv@gmail.com> wrote:

> Hi All,
> Please find below complete log of my previous screenshots,
>
> # ./runltp -a [  769.538489] smsc95xx 1-1.1:1.0 eth0: link up,
> 100Mbps, full-duplex, lpa 0x41E1
> [  769.551566] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> ^C
> # ./runltp -a umeshyv@gmail.com -p -o output.log -f sensor_test
> INFO: creating /usr/lib/ltp-testsuite/output directory
> INFO: creating /usr/lib/ltp-testsuite/results directory
> Checking for required user/group ids
>
> 'nobody' user id and group found.
> 'bin' user id and group found.
> 'daemon' user id and group found.
> Users group found.
> Sys group found.
> Required users/groups exist.
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> NAME=Buildroot
> VERSION=2018.02.1
> ID=buildroot
> VERSION_ID=2018.02.1
> PRETTY_NAME="Buildroot 2018.02.1"
> Linux buildroot 4.14.39-v7 #7 SMP Mon Jun 4 12:10:05 IST 2018 armv7l
> GNU/Linux
>
> Gnu C
> util-linux             version'
> util-linux             call binary.
> util-linux
> util-linux             n] DEVICE
> util-linux
> util-linux             Format floppy disk
> util-linux
> util-linux             n        Don't verify after format
> mount                  /dev/root on / type ext4 (rw,relatime,data=ordered)
> mount                  devtmpfs on /dev type devtmpfs
> (rw,relatime,size=457936k,nr_inodes=114484,mode=755)
> mount                  proc on /proc type proc (rw,relatime)
> mount                  devpts on /dev/pts type devpts
> (rw,relatime,gid=5,mode=620,ptmxmode=666)
> mount                  tmpfs on /dev/shm type tmpfs (rw,relatime,mode=777)
> mount                  tmpfs on /tmp type tmpfs (rw,relatime)
> mount                  tmpfs on /run type tmpfs
> (rw,nosuid,nodev,relatime,mode=755)
> mount                  sysfs on /sys type sysfs (rw,relatime)
> modutils               directory
> /bin/sh: is setuid
> Linux C Library        1.0.28
> Linux C Library        uClibc.so.1
> -v: No such file or directory
> Procps                 `--version'
> iproute2               binary.
> iputils                V
> Kbd                    73:
> Sh-utils               --v
> Modules Loaded         ipv6
>
> free reports:
>              total       used       free     shared    buffers     cached
> Mem:        925092      21064     904028         52        888       3256
> -/+ buffers/cache:      16920     908172
> Swap:            0          0          0
>
> /proc/cpuinfo
> processor       : 0
> model name      : ARMv7 Processor rev 5 (v7l)
> BogoMIPS        : 38.40
> Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
> idiva idivt vfpd32 lpae evtstrm
> CPU implementer : 0x41
> CPU architecture: 7
> CPU variant     : 0x0
> CPU part        : 0xc07
> CPU revision    : 5
>
> processor       : 1
> model name      : ARMv7 Processor rev 5 (v7l)
> BogoMIPS        : 38.40
> Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
> idiva idivt vfpd32 lpae evtstrm
> CPU implementer : 0x41
> CPU architecture: 7
> CPU variant     : 0x0
> CPU part        : 0xc07
> CPU revision    : 5
>
> processor       : 2
> model name      : ARMv7 Processor rev 5 (v7l)
> BogoMIPS        : 38.40
> Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
> idiva idivt vfpd32 lpae evtstrm
> CPU implementer : 0x41
> CPU architecture: 7
> CPU variant     : 0x0
> CPU part        : 0xc07
> CPU revision    : 5
>
> processor       : 3
> model name      : ARMv7 Processor rev 5 (v7l)
> BogoMIPS        : 38.40
> Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
> idiva idivt vfpd32 lpae evtstrm
> CPU implementer : 0x41
> CPU architecture: 7
> CPU variant     : 0x0
> CPU part        : 0xc07
> CPU revision    : 5
>
> Hardware        : BCM2835
> Revision        : a21041
> Serial          : 0000000093e3c1dd
> no big block device was specified on commandline.
> Tests which require a big block device are disabled.
> You can specify it with option -z
> COMMAND:    /usr/lib/ltp-testsuite/bin/ltp-pan   -e -S   -a 145     -n
> 145 -p -f /tmp/ltp-XXXX9KSUqp/alltests -l
> /usr/lib/ltp-testsuite/results/LTP_Rf
> LOG File:
> /usr/lib/ltp-testsuite/results/LTP_RUN_ON-1970_01_01-00h_14m_06s.log
> OUTPUT File: /usr/lib/ltp-testsuite/output/output.log
> FAILED COMMAND File:
> /usr/lib/ltp-testsuite/output/LTP_RUN_ON-output.log.failed
> TCONF COMMAND File:
> /usr/lib/ltp-testsuite/output/LTP_RUN_ON-output.log.tconf
> Running tests.......
> Segmentation fault
> INFO: ltp-pan reported some tests FAIL
> LTP Version: 20180118
> sh: !: unknown operand
> tar: removing leading '/' from member names
> Created TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar
> successfully, added /usr/lib/ltp-testsuite/output
> tar: invalid option -- u
> BusyBox v1.27.2 (2018-05-03 22:47:13 IST) multi-call binary.
>
> Usage: tar -[cxthvO] [-X FILE] [-T FILE] [-f TARFILE] [-C DIR] [FILE]...
>
> Create, extract, or list files from a tar file
>
> Operation:
>         c       Create
>         x       Extract
>         t       List
>         f       Name of TARFILE ('-' for stdin/out)
>         C       Change to DIR before operation
>         v       Verbose
>         O       Extract to stdout
>         h       Follow symlinks
>         exclude File to exclude
>         X       File with names to exclude
>         T       File with names to include
> Cannot Update TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar
> for adding /usr/lib/ltp-testsuite/results
> Gunzipped TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar
> Starting mailing reports to: umeshyv@gmail.com, file:
> ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar.gz
> ./runltp: line 1043: mail: not found
> Reports cannot be mailed to: umeshyv@gmail.com
>
>        ###############################################################
>
>             Done executing testcases.
>             LTP Version:  20180118
>        ###############################################################
>
> #
>
> My LTP test output
>
> # ./sensor_test
> sample01    1  TPASS  :  I2C DRIVER OPEN TEST Passed
> ---------LTP READ TEST----------
> Contents of WHO AM I Register bd
> sample01    2  TPASS  :  I2C READ TEST Passed
> ----------LTP WRITE TEST--------
> sample01    3  TPASS  :  I2C WRITE TEST Passed
> --------SENSOR TEST OUTPUT------
> temp low 1
> temp high 1
> temp out 257
> Temperature(without calibration)
>  = 43.04°C
> sample01    0  TINFO  :  I2C Tests Done!
>
>
> Thanks
> Umamahesh
>
>
>
>
> On Wed 27 Jun, 2018, 14:08 Cyril Hrubis, <chrubis@suse.cz> wrote:
> >
> > Hi!
> > > As suggested runtest was updated and output is attached for your
> reference
> > > and at the end of the test it says reports cannot be mailed.
> >
> > Can you please send text logs as a text next time?
> >
> > You are wasting a traffic and time for everyone with screenshots.
> >
> > > Is there any documentation how runtest is executed.
> > >
> > > Please suggest.
> >
> > The runtest file format is explained in the C test case tutorial:
> >
> >
> https://github.com/linux-test-project/ltp/wiki/C-Test-Case-Tutorial#3-create-the-test-skeleton
> >
> > --
> > Cyril Hrubis
> > chrubis@suse.cz
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linux.it/pipermail/ltp/attachments/20180629/06f3b6b6/attachment-0001.html>

[LTP] runltp fails with Buildroot

[Cyril Hrubis]

Hi!
> Tests which require a big block device are disabled.
> You can specify it with option -z
> COMMAND:    /usr/lib/ltp-testsuite/bin/ltp-pan   -e -S   -a 145     -n
> 145 -p -f /tmp/ltp-XXXX9KSUqp/alltests -l
> /usr/lib/ltp-testsuite/results/LTP_Rf
> LOG File: /usr/lib/ltp-testsuite/results/LTP_RUN_ON-1970_01_01-00h_14m_06s.log
> OUTPUT File: /usr/lib/ltp-testsuite/output/output.log
> FAILED COMMAND File: /usr/lib/ltp-testsuite/output/LTP_RUN_ON-output.log.failed
> TCONF COMMAND File: /usr/lib/ltp-testsuite/output/LTP_RUN_ON-output.log.tconf
> Running tests.......
> Segmentation fault
> INFO: ltp-pan reported some tests FAIL
> LTP Version: 20180118
> sh: !: unknown operand
> tar: removing leading '/' from member names
> Created TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar
> successfully, added /usr/lib/ltp-testsuite/output
> tar: invalid option -- u
> BusyBox v1.27.2 (2018-05-03 22:47:13 IST) multi-call binary.
> 
> Usage: tar -[cxthvO] [-X FILE] [-T FILE] [-f TARFILE] [-C DIR] [FILE]...
> 
> Create, extract, or list files from a tar file
> 
> Operation:
>         c       Create
>         x       Extract
>         t       List
>         f       Name of TARFILE ('-' for stdin/out)
>         C       Change to DIR before operation
>         v       Verbose
>         O       Extract to stdout
>         h       Follow symlinks
>         exclude File to exclude
>         X       File with names to exclude
>         T       File with names to include
> Cannot Update TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar

You version of tar is missing -u option, it's pretty much obvious from
the log.

> for adding /usr/lib/ltp-testsuite/results
> Gunzipped TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar
> Starting mailing reports to: umeshyv@gmail.com, file:
> ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar.gz
> ./runltp: line 1043: mail: not found
> Reports cannot be mailed to: umeshyv@gmail.com

This log does not seem to match the runltp script, there is no mail
command called in there and the line 1043 is the last line of the script
in our repository.

-- 
Cyril Hrubis
chrubis@suse.cz