[PATCH v3 00/18] ARM: davinci: step towards removing at24_platform_data

[PATCH v3 00/18] ARM: davinci: step towards removing at24_platform_data

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Since I took over maintainership of the at24 driver I've been working
towards removing at24_platform_data in favor for device properties.

DaVinci is the only platform that's still using it - all other users
have already been converted.

One of the obstacles in case of DaVinci is removing the setup() callback
from the pdata struct, the only user of which are some davinci boards.

Most boards use the EEPROM to store the MAC address. This series adds
support for cell lookups to the nvmem framework, registers relevant
cells for all users, converts the davinci_emac driver to using them
and replaces at24_platform_data with device properties.

The only board that's still using this callback is now mityomapl138.
Unfortunately it stores more info in EEPROM than just the MAC address
and will require some more work. Unfortunately I don't have access
to this board so I can't test any actual solutions on a live hardware.

Tested on a dm365-evm board.

v1 -> v2:
- for backward compatiblity: fall back to using of_get_mac_address() if
  we can't get an nvmem cell in patch 7
- add patch 15 which removes dead code

v2 -> v3:
- documented new nvmem cell lookup API
- renamed the nvmem cell lookup routines
- in order to completly remove the mac_addr from davinci's soc_info
  added a patch that moves reading the MAC address from SPI to the emac
  driver
- removed more dead code

Bartosz Golaszewski (18):
  nvmem: add support for cell lookups
  Documentation: nvmem: document lookup entries
  ARM: davinci: dm365-evm: use nvmem lookup for mac address
  ARM: davinci: dm644-evm: use nvmem lookup for mac address
  ARM: davinci: dm646x-evm: use nvmem lookup for mac address
  ARM: davinci: da830-evm: use nvmem lookup for mac address
  ARM: davinci: mityomapl138: add nvmem cells lookup entries
  net: davinci_emac: potentially get the MAC address from MTD
  ARM: davinci: da850-evm: remove dead MTD code
  net: davinci_emac: use nvmem to retrieve the mac address
  ARM: davinci: mityomapl138: don't read the MAC address from machine
    code
  ARM: davinci: dm365-evm: use device properties for at24 eeprom
  ARM: davinci: da830-evm: use device properties for at24 eeprom
  ARM: davinci: dm644x-evm: use device properties for at24 eeprom
  ARM: davinci: dm646x-evm: use device properties for at24 eeprom
  ARM: davinci: sffsdr: fix the at24 eeprom device name
  ARM: davinci: sffsdr: use device properties for at24 eeprom
  ARM: davinci: remove dead code related to MAC address reading

 Documentation/nvmem/nvmem.txt              | 28 ++++++++
 arch/arm/mach-davinci/board-da830-evm.c    | 25 +++++---
 arch/arm/mach-davinci/board-da850-evm.c    | 28 --------
 arch/arm/mach-davinci/board-dm365-evm.c    | 25 +++++---
 arch/arm/mach-davinci/board-dm644x-evm.c   | 24 ++++---
 arch/arm/mach-davinci/board-dm646x-evm.c   | 25 +++++---
 arch/arm/mach-davinci/board-mityomapl138.c | 30 ++++++---
 arch/arm/mach-davinci/board-sffsdr.c       | 13 ++--
 arch/arm/mach-davinci/common.c             | 15 -----
 drivers/net/ethernet/ti/davinci_emac.c     | 50 ++++++++++++---
 drivers/nvmem/core.c                       | 75 +++++++++++++++++++++-
 include/linux/davinci_emac.h               |  2 -
 include/linux/nvmem-consumer.h             |  6 ++
 include/linux/nvmem-provider.h             | 10 +++
 14 files changed, 253 insertions(+), 103 deletions(-)

-- 
2.17.1

[PATCH v3 00/18] ARM: davinci: step towards removing at24_platform_data

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Since I took over maintainership of the at24 driver I've been working
towards removing at24_platform_data in favor for device properties.

DaVinci is the only platform that's still using it - all other users
have already been converted.

One of the obstacles in case of DaVinci is removing the setup() callback
from the pdata struct, the only user of which are some davinci boards.

Most boards use the EEPROM to store the MAC address. This series adds
support for cell lookups to the nvmem framework, registers relevant
cells for all users, converts the davinci_emac driver to using them
and replaces at24_platform_data with device properties.

The only board that's still using this callback is now mityomapl138.
Unfortunately it stores more info in EEPROM than just the MAC address
and will require some more work. Unfortunately I don't have access
to this board so I can't test any actual solutions on a live hardware.

Tested on a dm365-evm board.

v1 -> v2:
- for backward compatiblity: fall back to using of_get_mac_address() if
  we can't get an nvmem cell in patch 7
- add patch 15 which removes dead code

v2 -> v3:
- documented new nvmem cell lookup API
- renamed the nvmem cell lookup routines
- in order to completly remove the mac_addr from davinci's soc_info
  added a patch that moves reading the MAC address from SPI to the emac
  driver
- removed more dead code

Bartosz Golaszewski (18):
  nvmem: add support for cell lookups
  Documentation: nvmem: document lookup entries
  ARM: davinci: dm365-evm: use nvmem lookup for mac address
  ARM: davinci: dm644-evm: use nvmem lookup for mac address
  ARM: davinci: dm646x-evm: use nvmem lookup for mac address
  ARM: davinci: da830-evm: use nvmem lookup for mac address
  ARM: davinci: mityomapl138: add nvmem cells lookup entries
  net: davinci_emac: potentially get the MAC address from MTD
  ARM: davinci: da850-evm: remove dead MTD code
  net: davinci_emac: use nvmem to retrieve the mac address
  ARM: davinci: mityomapl138: don't read the MAC address from machine
    code
  ARM: davinci: dm365-evm: use device properties for at24 eeprom
  ARM: davinci: da830-evm: use device properties for at24 eeprom
  ARM: davinci: dm644x-evm: use device properties for at24 eeprom
  ARM: davinci: dm646x-evm: use device properties for at24 eeprom
  ARM: davinci: sffsdr: fix the at24 eeprom device name
  ARM: davinci: sffsdr: use device properties for at24 eeprom
  ARM: davinci: remove dead code related to MAC address reading

 Documentation/nvmem/nvmem.txt              | 28 ++++++++
 arch/arm/mach-davinci/board-da830-evm.c    | 25 +++++---
 arch/arm/mach-davinci/board-da850-evm.c    | 28 --------
 arch/arm/mach-davinci/board-dm365-evm.c    | 25 +++++---
 arch/arm/mach-davinci/board-dm644x-evm.c   | 24 ++++---
 arch/arm/mach-davinci/board-dm646x-evm.c   | 25 +++++---
 arch/arm/mach-davinci/board-mityomapl138.c | 30 ++++++---
 arch/arm/mach-davinci/board-sffsdr.c       | 13 ++--
 arch/arm/mach-davinci/common.c             | 15 -----
 drivers/net/ethernet/ti/davinci_emac.c     | 50 ++++++++++++---
 drivers/nvmem/core.c                       | 75 +++++++++++++++++++++-
 include/linux/davinci_emac.h               |  2 -
 include/linux/nvmem-consumer.h             |  6 ++
 include/linux/nvmem-provider.h             | 10 +++
 14 files changed, 253 insertions(+), 103 deletions(-)

-- 
2.17.1

[PATCH v3 01/18] nvmem: add support for cell lookups

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We can currently only register nvmem cells from device tree or by
manually calling nvmem_add_cells(). The latter options however forces
users to make sure that the nvmem provider with which the cells are
associated is registered before the call.

This patch proposes a new solution inspired by other frameworks that
offer resource lookups (GPIO, PWM etc.). It adds functions that allow
machine code to register nvmem lookup which are later lazily used to
add corresponding nvmem cells and remove them if no longer needed.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/nvmem/core.c           | 75 +++++++++++++++++++++++++++++++++-
 include/linux/nvmem-consumer.h |  6 +++
 include/linux/nvmem-provider.h | 10 +++++
 3 files changed, 90 insertions(+), 1 deletion(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index b5b0cdc21d01..c4889a4b26cf 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -62,6 +62,9 @@ static DEFINE_IDA(nvmem_ida);
 static LIST_HEAD(nvmem_cells);
 static DEFINE_MUTEX(nvmem_cells_mutex);
 
+static LIST_HEAD(nvmem_cell_lookups);
+static DEFINE_MUTEX(nvmem_lookup_mutex);
+
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 static struct lock_class_key eeprom_lock_key;
 #endif
@@ -247,6 +250,41 @@ static const struct attribute_group *nvmem_ro_root_dev_groups[] = {
 	NULL,
 };
 
+/**
+ * nvmem_add_lookup_table() - register a number of nvmem cell lookup entries
+ *
+ * @lookup: array of nvmem cell lookup entries
+ * @nentries: number of lookup entries in the array
+ */
+void nvmem_add_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries)
+{
+	int i;
+
+	mutex_lock(&nvmem_lookup_mutex);
+	for (i = 0; i < nentries; i++)
+		list_add_tail(&lookup[i].list, &nvmem_cell_lookups);
+	mutex_unlock(&nvmem_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(nvmem_add_lookup_table);
+
+/**
+ * nvmem_del_lookup_table() - unregister a set of previously added nvmem cell
+ *                            lookup entries
+ *
+ * @lookup: array of nvmem cell lookup entries
+ * @nentries: number of lookup entries in the array
+ */
+void nvmem_del_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries)
+{
+	int i;
+
+	mutex_lock(&nvmem_lookup_mutex);
+	for (i = 0; i < nentries; i++)
+		list_del(&lookup[i].list);
+	mutex_unlock(&nvmem_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(nvmem_del_lookup_table);
+
 static void nvmem_release(struct device *dev)
 {
 	struct nvmem_device *nvmem = to_nvmem_device(dev);
@@ -916,6 +954,37 @@ struct nvmem_cell *of_nvmem_cell_get(struct device_node *np,
 EXPORT_SYMBOL_GPL(of_nvmem_cell_get);
 #endif
 
+static struct nvmem_cell *nvmem_cell_from_lookup(const char *cell_id)
+{
+	struct nvmem_cell *cell = ERR_PTR(-EPROBE_DEFER);
+	struct nvmem_cell_lookup *lookup;
+	struct nvmem_device *nvmem;
+	int rc;
+
+	mutex_lock(&nvmem_lookup_mutex);
+
+	list_for_each_entry(lookup, &nvmem_cell_lookups, list) {
+		if (strcmp(cell_id, lookup->info.name) == 0) {
+			nvmem = nvmem_find(lookup->nvmem_name);
+			if (!nvmem)
+				goto out;
+
+			rc = nvmem_add_cells(nvmem, &lookup->info, 1);
+			if (rc) {
+				cell = ERR_PTR(rc);
+				goto out;
+			}
+
+			cell = nvmem_cell_get_from_list(cell_id);
+			break;
+		}
+	}
+
+out:
+	mutex_unlock(&nvmem_lookup_mutex);
+	return cell;
+}
+
 /**
  * nvmem_cell_get() - Get nvmem cell of device form a given cell name
  *
@@ -936,7 +1005,11 @@ struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *cell_id)
 			return cell;
 	}
 
-	return nvmem_cell_get_from_list(cell_id);
+	cell = nvmem_cell_get_from_list(cell_id);
+	if (!IS_ERR(cell) || PTR_ERR(cell) == -EPROBE_DEFER)
+		return cell;
+
+	return nvmem_cell_from_lookup(cell_id);
 }
 EXPORT_SYMBOL_GPL(nvmem_cell_get);
 
diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h
index 4e85447f7860..f4b5d3186e94 100644
--- a/include/linux/nvmem-consumer.h
+++ b/include/linux/nvmem-consumer.h
@@ -29,6 +29,12 @@ struct nvmem_cell_info {
 	unsigned int		nbits;
 };
 
+struct nvmem_cell_lookup {
+	struct nvmem_cell_info	info;
+	struct list_head	list;
+	const char		*nvmem_name;
+};
+
 #if IS_ENABLED(CONFIG_NVMEM)
 
 /* Cell based interface */
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index 24def6ad09bb..6a17d722062b 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -17,6 +17,7 @@
 
 struct nvmem_device;
 struct nvmem_cell_info;
+struct nvmem_cell_lookup;
 typedef int (*nvmem_reg_read_t)(void *priv, unsigned int offset,
 				void *val, size_t bytes);
 typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset,
@@ -72,6 +73,9 @@ struct nvmem_config {
 struct nvmem_device *nvmem_register(const struct nvmem_config *cfg);
 int nvmem_unregister(struct nvmem_device *nvmem);
 
+void nvmem_add_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries);
+void nvmem_del_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries);
+
 struct nvmem_device *devm_nvmem_register(struct device *dev,
 					 const struct nvmem_config *cfg);
 
@@ -92,6 +96,12 @@ static inline int nvmem_unregister(struct nvmem_device *nvmem)
 	return -ENOSYS;
 }
 
+static inline void
+nvmem_add_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries) {}
+
+static inline void
+nvmem_del_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries) {}
+
 static inline struct nvmem_device *
 devm_nvmem_register(struct device *dev, const struct nvmem_config *c)
 {
-- 
2.17.1

[PATCH v3 01/18] nvmem: add support for cell lookups

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We can currently only register nvmem cells from device tree or by
manually calling nvmem_add_cells(). The latter options however forces
users to make sure that the nvmem provider with which the cells are
associated is registered before the call.

This patch proposes a new solution inspired by other frameworks that
offer resource lookups (GPIO, PWM etc.). It adds functions that allow
machine code to register nvmem lookup which are later lazily used to
add corresponding nvmem cells and remove them if no longer needed.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/nvmem/core.c           | 75 +++++++++++++++++++++++++++++++++-
 include/linux/nvmem-consumer.h |  6 +++
 include/linux/nvmem-provider.h | 10 +++++
 3 files changed, 90 insertions(+), 1 deletion(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index b5b0cdc21d01..c4889a4b26cf 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -62,6 +62,9 @@ static DEFINE_IDA(nvmem_ida);
 static LIST_HEAD(nvmem_cells);
 static DEFINE_MUTEX(nvmem_cells_mutex);
 
+static LIST_HEAD(nvmem_cell_lookups);
+static DEFINE_MUTEX(nvmem_lookup_mutex);
+
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 static struct lock_class_key eeprom_lock_key;
 #endif
@@ -247,6 +250,41 @@ static const struct attribute_group *nvmem_ro_root_dev_groups[] = {
 	NULL,
 };
 
+/**
+ * nvmem_add_lookup_table() - register a number of nvmem cell lookup entries
+ *
+ * @lookup: array of nvmem cell lookup entries
+ * @nentries: number of lookup entries in the array
+ */
+void nvmem_add_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries)
+{
+	int i;
+
+	mutex_lock(&nvmem_lookup_mutex);
+	for (i = 0; i < nentries; i++)
+		list_add_tail(&lookup[i].list, &nvmem_cell_lookups);
+	mutex_unlock(&nvmem_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(nvmem_add_lookup_table);
+
+/**
+ * nvmem_del_lookup_table() - unregister a set of previously added nvmem cell
+ *                            lookup entries
+ *
+ * @lookup: array of nvmem cell lookup entries
+ * @nentries: number of lookup entries in the array
+ */
+void nvmem_del_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries)
+{
+	int i;
+
+	mutex_lock(&nvmem_lookup_mutex);
+	for (i = 0; i < nentries; i++)
+		list_del(&lookup[i].list);
+	mutex_unlock(&nvmem_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(nvmem_del_lookup_table);
+
 static void nvmem_release(struct device *dev)
 {
 	struct nvmem_device *nvmem = to_nvmem_device(dev);
@@ -916,6 +954,37 @@ struct nvmem_cell *of_nvmem_cell_get(struct device_node *np,
 EXPORT_SYMBOL_GPL(of_nvmem_cell_get);
 #endif
 
+static struct nvmem_cell *nvmem_cell_from_lookup(const char *cell_id)
+{
+	struct nvmem_cell *cell = ERR_PTR(-EPROBE_DEFER);
+	struct nvmem_cell_lookup *lookup;
+	struct nvmem_device *nvmem;
+	int rc;
+
+	mutex_lock(&nvmem_lookup_mutex);
+
+	list_for_each_entry(lookup, &nvmem_cell_lookups, list) {
+		if (strcmp(cell_id, lookup->info.name) == 0) {
+			nvmem = nvmem_find(lookup->nvmem_name);
+			if (!nvmem)
+				goto out;
+
+			rc = nvmem_add_cells(nvmem, &lookup->info, 1);
+			if (rc) {
+				cell = ERR_PTR(rc);
+				goto out;
+			}
+
+			cell = nvmem_cell_get_from_list(cell_id);
+			break;
+		}
+	}
+
+out:
+	mutex_unlock(&nvmem_lookup_mutex);
+	return cell;
+}
+
 /**
  * nvmem_cell_get() - Get nvmem cell of device form a given cell name
  *
@@ -936,7 +1005,11 @@ struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *cell_id)
 			return cell;
 	}
 
-	return nvmem_cell_get_from_list(cell_id);
+	cell = nvmem_cell_get_from_list(cell_id);
+	if (!IS_ERR(cell) || PTR_ERR(cell) == -EPROBE_DEFER)
+		return cell;
+
+	return nvmem_cell_from_lookup(cell_id);
 }
 EXPORT_SYMBOL_GPL(nvmem_cell_get);
 
diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h
index 4e85447f7860..f4b5d3186e94 100644
--- a/include/linux/nvmem-consumer.h
+++ b/include/linux/nvmem-consumer.h
@@ -29,6 +29,12 @@ struct nvmem_cell_info {
 	unsigned int		nbits;
 };
 
+struct nvmem_cell_lookup {
+	struct nvmem_cell_info	info;
+	struct list_head	list;
+	const char		*nvmem_name;
+};
+
 #if IS_ENABLED(CONFIG_NVMEM)
 
 /* Cell based interface */
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index 24def6ad09bb..6a17d722062b 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -17,6 +17,7 @@
 
 struct nvmem_device;
 struct nvmem_cell_info;
+struct nvmem_cell_lookup;
 typedef int (*nvmem_reg_read_t)(void *priv, unsigned int offset,
 				void *val, size_t bytes);
 typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset,
@@ -72,6 +73,9 @@ struct nvmem_config {
 struct nvmem_device *nvmem_register(const struct nvmem_config *cfg);
 int nvmem_unregister(struct nvmem_device *nvmem);
 
+void nvmem_add_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries);
+void nvmem_del_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries);
+
 struct nvmem_device *devm_nvmem_register(struct device *dev,
 					 const struct nvmem_config *cfg);
 
@@ -92,6 +96,12 @@ static inline int nvmem_unregister(struct nvmem_device *nvmem)
 	return -ENOSYS;
 }
 
+static inline void
+nvmem_add_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries) {}
+
+static inline void
+nvmem_del_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries) {}
+
 static inline struct nvmem_device *
 devm_nvmem_register(struct device *dev, const struct nvmem_config *c)
 {
-- 
2.17.1

[PATCH v3 01/18] nvmem: add support for cell lookups

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We can currently only register nvmem cells from device tree or by
manually calling nvmem_add_cells(). The latter options however forces
users to make sure that the nvmem provider with which the cells are
associated is registered before the call.

This patch proposes a new solution inspired by other frameworks that
offer resource lookups (GPIO, PWM etc.). It adds functions that allow
machine code to register nvmem lookup which are later lazily used to
add corresponding nvmem cells and remove them if no longer needed.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/nvmem/core.c           | 75 +++++++++++++++++++++++++++++++++-
 include/linux/nvmem-consumer.h |  6 +++
 include/linux/nvmem-provider.h | 10 +++++
 3 files changed, 90 insertions(+), 1 deletion(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index b5b0cdc21d01..c4889a4b26cf 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -62,6 +62,9 @@ static DEFINE_IDA(nvmem_ida);
 static LIST_HEAD(nvmem_cells);
 static DEFINE_MUTEX(nvmem_cells_mutex);
 
+static LIST_HEAD(nvmem_cell_lookups);
+static DEFINE_MUTEX(nvmem_lookup_mutex);
+
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 static struct lock_class_key eeprom_lock_key;
 #endif
@@ -247,6 +250,41 @@ static const struct attribute_group *nvmem_ro_root_dev_groups[] = {
 	NULL,
 };
 
+/**
+ * nvmem_add_lookup_table() - register a number of nvmem cell lookup entries
+ *
+ * @lookup: array of nvmem cell lookup entries
+ * @nentries: number of lookup entries in the array
+ */
+void nvmem_add_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries)
+{
+	int i;
+
+	mutex_lock(&nvmem_lookup_mutex);
+	for (i = 0; i < nentries; i++)
+		list_add_tail(&lookup[i].list, &nvmem_cell_lookups);
+	mutex_unlock(&nvmem_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(nvmem_add_lookup_table);
+
+/**
+ * nvmem_del_lookup_table() - unregister a set of previously added nvmem cell
+ *                            lookup entries
+ *
+ * @lookup: array of nvmem cell lookup entries
+ * @nentries: number of lookup entries in the array
+ */
+void nvmem_del_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries)
+{
+	int i;
+
+	mutex_lock(&nvmem_lookup_mutex);
+	for (i = 0; i < nentries; i++)
+		list_del(&lookup[i].list);
+	mutex_unlock(&nvmem_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(nvmem_del_lookup_table);
+
 static void nvmem_release(struct device *dev)
 {
 	struct nvmem_device *nvmem = to_nvmem_device(dev);
@@ -916,6 +954,37 @@ struct nvmem_cell *of_nvmem_cell_get(struct device_node *np,
 EXPORT_SYMBOL_GPL(of_nvmem_cell_get);
 #endif
 
+static struct nvmem_cell *nvmem_cell_from_lookup(const char *cell_id)
+{
+	struct nvmem_cell *cell = ERR_PTR(-EPROBE_DEFER);
+	struct nvmem_cell_lookup *lookup;
+	struct nvmem_device *nvmem;
+	int rc;
+
+	mutex_lock(&nvmem_lookup_mutex);
+
+	list_for_each_entry(lookup, &nvmem_cell_lookups, list) {
+		if (strcmp(cell_id, lookup->info.name) == 0) {
+			nvmem = nvmem_find(lookup->nvmem_name);
+			if (!nvmem)
+				goto out;
+
+			rc = nvmem_add_cells(nvmem, &lookup->info, 1);
+			if (rc) {
+				cell = ERR_PTR(rc);
+				goto out;
+			}
+
+			cell = nvmem_cell_get_from_list(cell_id);
+			break;
+		}
+	}
+
+out:
+	mutex_unlock(&nvmem_lookup_mutex);
+	return cell;
+}
+
 /**
  * nvmem_cell_get() - Get nvmem cell of device form a given cell name
  *
@@ -936,7 +1005,11 @@ struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *cell_id)
 			return cell;
 	}
 
-	return nvmem_cell_get_from_list(cell_id);
+	cell = nvmem_cell_get_from_list(cell_id);
+	if (!IS_ERR(cell) || PTR_ERR(cell) == -EPROBE_DEFER)
+		return cell;
+
+	return nvmem_cell_from_lookup(cell_id);
 }
 EXPORT_SYMBOL_GPL(nvmem_cell_get);
 
diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h
index 4e85447f7860..f4b5d3186e94 100644
--- a/include/linux/nvmem-consumer.h
+++ b/include/linux/nvmem-consumer.h
@@ -29,6 +29,12 @@ struct nvmem_cell_info {
 	unsigned int		nbits;
 };
 
+struct nvmem_cell_lookup {
+	struct nvmem_cell_info	info;
+	struct list_head	list;
+	const char		*nvmem_name;
+};
+
 #if IS_ENABLED(CONFIG_NVMEM)
 
 /* Cell based interface */
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index 24def6ad09bb..6a17d722062b 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -17,6 +17,7 @@
 
 struct nvmem_device;
 struct nvmem_cell_info;
+struct nvmem_cell_lookup;
 typedef int (*nvmem_reg_read_t)(void *priv, unsigned int offset,
 				void *val, size_t bytes);
 typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset,
@@ -72,6 +73,9 @@ struct nvmem_config {
 struct nvmem_device *nvmem_register(const struct nvmem_config *cfg);
 int nvmem_unregister(struct nvmem_device *nvmem);
 
+void nvmem_add_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries);
+void nvmem_del_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries);
+
 struct nvmem_device *devm_nvmem_register(struct device *dev,
 					 const struct nvmem_config *cfg);
 
@@ -92,6 +96,12 @@ static inline int nvmem_unregister(struct nvmem_device *nvmem)
 	return -ENOSYS;
 }
 
+static inline void
+nvmem_add_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries) {}
+
+static inline void
+nvmem_del_lookup_table(struct nvmem_cell_lookup *lookup, size_t nentries) {}
+
 static inline struct nvmem_device *
 devm_nvmem_register(struct device *dev, const struct nvmem_config *c)
 {
-- 
2.17.1

[PATCH v3 02/18] Documentation: nvmem: document lookup entries

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Describe the usage of nvmem cell lookup tables.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 Documentation/nvmem/nvmem.txt | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.txt
index 8d8d8f58f96f..9d5e3ca2b4f3 100644
--- a/Documentation/nvmem/nvmem.txt
+++ b/Documentation/nvmem/nvmem.txt
@@ -58,6 +58,34 @@ static int qfprom_probe(struct platform_device *pdev)
 It is mandatory that the NVMEM provider has a regmap associated with its
 struct device. Failure to do would return error code from nvmem_register().
 
+Additionally it is possible to create nvmem cell lookup entries and register
+them with the nvmem framework from machine code as shown in the example below:
+
+static struct nvmem_cell_lookup foobar_lookup = {
+	.info = {
+		.name = "mac-address",
+		.offset = 0xd000,
+		.bytes = ERH_ALEN,
+	},
+	.nvmem_name = "foobar",
+};
+
+static void foobar_register(void)
+{
+	...
+	nvmem_add_lookup_table(&foobar_lookup, 1);
+	...
+}
+
+A lookup entry table can be later removed if needed:
+
+static void foobar_fini(void)
+{
+	...
+	nvmem_del_lookup_table(&foobar_lookup, 1);
+	...
+}
+
 NVMEM Consumers
 +++++++++++++++
 
-- 
2.17.1

[PATCH v3 02/18] Documentation: nvmem: document lookup entries

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Describe the usage of nvmem cell lookup tables.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 Documentation/nvmem/nvmem.txt | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.txt
index 8d8d8f58f96f..9d5e3ca2b4f3 100644
--- a/Documentation/nvmem/nvmem.txt
+++ b/Documentation/nvmem/nvmem.txt
@@ -58,6 +58,34 @@ static int qfprom_probe(struct platform_device *pdev)
 It is mandatory that the NVMEM provider has a regmap associated with its
 struct device. Failure to do would return error code from nvmem_register().
 
+Additionally it is possible to create nvmem cell lookup entries and register
+them with the nvmem framework from machine code as shown in the example below:
+
+static struct nvmem_cell_lookup foobar_lookup = {
+	.info = {
+		.name = "mac-address",
+		.offset = 0xd000,
+		.bytes = ERH_ALEN,
+	},
+	.nvmem_name = "foobar",
+};
+
+static void foobar_register(void)
+{
+	...
+	nvmem_add_lookup_table(&foobar_lookup, 1);
+	...
+}
+
+A lookup entry table can be later removed if needed:
+
+static void foobar_fini(void)
+{
+	...
+	nvmem_del_lookup_table(&foobar_lookup, 1);
+	...
+}
+
 NVMEM Consumers
 +++++++++++++++
 
-- 
2.17.1

[PATCH v3 03/18] ARM: davinci: dm365-evm: use nvmem lookup for mac address

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support nvmem lookups for machine code. Add a lookup for
mac-address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 435f7ec7d9af..cb0ac92a278e 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -28,6 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/v4l2-dv-timings.h>
+#include <linux/nvmem-provider.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -169,6 +170,15 @@ static struct platform_device davinci_nand_device = {
 	},
 };
 
+static struct nvmem_cell_lookup dm365evm_mac_address_cell = {
+	.info = {
+		.name = "mac-address",
+		.offset = 0x7f00,
+		.bytes = ETH_ALEN,
+	},
+	.nvmem_name = "1-00500",
+};
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len       = (256*1024) / 8,
 	.page_size      = 64,
@@ -769,6 +779,8 @@ static __init void dm365_evm_init(void)
 
 	dm365_init_spi0(BIT(0), dm365_evm_spi_info,
 			ARRAY_SIZE(dm365_evm_spi_info));
+
+	nvmem_add_lookup_table(&dm365evm_mac_address_cell, 1);
 }
 
 MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-- 
2.17.1

[PATCH v3 03/18] ARM: davinci: dm365-evm: use nvmem lookup for mac address

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support nvmem lookups for machine code. Add a lookup for
mac-address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 435f7ec7d9af..cb0ac92a278e 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -28,6 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/v4l2-dv-timings.h>
+#include <linux/nvmem-provider.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -169,6 +170,15 @@ static struct platform_device davinci_nand_device = {
 	},
 };
 
+static struct nvmem_cell_lookup dm365evm_mac_address_cell = {
+	.info = {
+		.name = "mac-address",
+		.offset = 0x7f00,
+		.bytes = ETH_ALEN,
+	},
+	.nvmem_name = "1-00500",
+};
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len       = (256*1024) / 8,
 	.page_size      = 64,
@@ -769,6 +779,8 @@ static __init void dm365_evm_init(void)
 
 	dm365_init_spi0(BIT(0), dm365_evm_spi_info,
 			ARRAY_SIZE(dm365_evm_spi_info));
+
+	nvmem_add_lookup_table(&dm365evm_mac_address_cell, 1);
 }
 
 MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-- 
2.17.1

[PATCH v3 04/18] ARM: davinci: dm644-evm: use nvmem lookup for mac address

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support nvmem lookups for machine code. Add a lookup for
mac-address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 48436f74fd71..6d35c6e1b0bd 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -28,6 +28,7 @@
 #include <linux/v4l2-dv-timings.h>
 #include <linux/export.h>
 #include <linux/leds.h>
+#include <linux/nvmem-provider.h>
 
 #include <media/i2c/tvp514x.h>
 
@@ -476,6 +477,15 @@ static struct pcf857x_platform_data pcf_data_u35 = {
  *  - ... newer boards may have more
  */
 
+static struct nvmem_cell_lookup dm6446evm_mac_address_cell = {
+	.info = {
+		.name = "mac-address",
+		.offset = 0x7f00,
+		.bytes = ETH_ALEN,
+	},
+	.nvmem_name = "1-00500",
+};
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (256*1024) / 8,
 	.page_size	= 64,
@@ -828,6 +838,8 @@ static __init void davinci_evm_init(void)
 		phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
 						davinci_phy_fixup);
 	}
+
+	nvmem_add_lookup_table(&dm6446evm_mac_address_cell, 1);
 }
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
-- 
2.17.1

[PATCH v3 04/18] ARM: davinci: dm644-evm: use nvmem lookup for mac address

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support nvmem lookups for machine code. Add a lookup for
mac-address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 48436f74fd71..6d35c6e1b0bd 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -28,6 +28,7 @@
 #include <linux/v4l2-dv-timings.h>
 #include <linux/export.h>
 #include <linux/leds.h>
+#include <linux/nvmem-provider.h>
 
 #include <media/i2c/tvp514x.h>
 
@@ -476,6 +477,15 @@ static struct pcf857x_platform_data pcf_data_u35 = {
  *  - ... newer boards may have more
  */
 
+static struct nvmem_cell_lookup dm6446evm_mac_address_cell = {
+	.info = {
+		.name = "mac-address",
+		.offset = 0x7f00,
+		.bytes = ETH_ALEN,
+	},
+	.nvmem_name = "1-00500",
+};
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (256*1024) / 8,
 	.page_size	= 64,
@@ -828,6 +838,8 @@ static __init void davinci_evm_init(void)
 		phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
 						davinci_phy_fixup);
 	}
+
+	nvmem_add_lookup_table(&dm6446evm_mac_address_cell, 1);
 }
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
-- 
2.17.1

[PATCH v3 05/18] ARM: davinci: dm646x-evm: use nvmem lookup for mac address

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support nvmem lookups for machine code. Add a lookup for
mac-address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm646x-evm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 584064fdabf5..5a9de47bc8a2 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -37,6 +37,7 @@
 #include <linux/platform_data/i2c-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/nvmem-provider.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -310,6 +311,15 @@ static struct pcf857x_platform_data pcf_data = {
  *  - ... newer boards may have more
  */
 
+static struct nvmem_cell_lookup dm646x_evm_mac_address_cell = {
+	.info = {
+		.name = "mac-address",
+		.offset = 0x7f00,
+		.bytes = ETH_ALEN,
+	},
+	.nvmem_name = "1-00500",
+};
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len       = (256*1024) / 8,
 	.page_size      = 64,
@@ -802,6 +812,8 @@ static __init void evm_init(void)
 		davinci_init_ide();
 
 	soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
+
+	nvmem_add_lookup_table(&dm646x_evm_mac_address_cell, 1);
 }
 
 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
-- 
2.17.1

[PATCH v3 05/18] ARM: davinci: dm646x-evm: use nvmem lookup for mac address

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support nvmem lookups for machine code. Add a lookup for
mac-address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm646x-evm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 584064fdabf5..5a9de47bc8a2 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -37,6 +37,7 @@
 #include <linux/platform_data/i2c-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/nvmem-provider.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -310,6 +311,15 @@ static struct pcf857x_platform_data pcf_data = {
  *  - ... newer boards may have more
  */
 
+static struct nvmem_cell_lookup dm646x_evm_mac_address_cell = {
+	.info = {
+		.name = "mac-address",
+		.offset = 0x7f00,
+		.bytes = ETH_ALEN,
+	},
+	.nvmem_name = "1-00500",
+};
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len       = (256*1024) / 8,
 	.page_size      = 64,
@@ -802,6 +812,8 @@ static __init void evm_init(void)
 		davinci_init_ide();
 
 	soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
+
+	nvmem_add_lookup_table(&dm646x_evm_mac_address_cell, 1);
 }
 
 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
-- 
2.17.1

[PATCH v3 06/18] ARM: davinci: da830-evm: use nvmem lookup for mac address

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support nvmem lookups for machine code. Add a lookup for
mac-address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da830-evm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 14a6fc061744..4a2fe8142a2f 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -29,6 +29,7 @@
 #include <linux/platform_data/spi-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/regulator/machine.h>
+#include <linux/nvmem-provider.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -409,6 +410,15 @@ static inline void da830_evm_init_lcdc(int mux_mode)
 static inline void da830_evm_init_lcdc(int mux_mode) { }
 #endif
 
+static struct nvmem_cell_lookup da830_evm_mac_address_cell = {
+	.info = {
+		.name = "mac-address",
+		.offset = 0x7f00,
+		.bytes = ETH_ALEN,
+	},
+	.nvmem_name = "1-00500",
+};
+
 static struct at24_platform_data da830_evm_i2c_eeprom_info = {
 	.byte_len	= SZ_256K / 8,
 	.page_size	= 64,
@@ -618,6 +628,8 @@ static __init void da830_evm_init(void)
 		pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret);
 
 	regulator_has_full_constraints();
+
+	nvmem_add_lookup_table(&da830_evm_mac_address_cell, 1);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
-- 
2.17.1

[PATCH v3 06/18] ARM: davinci: da830-evm: use nvmem lookup for mac address

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support nvmem lookups for machine code. Add a lookup for
mac-address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da830-evm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 14a6fc061744..4a2fe8142a2f 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -29,6 +29,7 @@
 #include <linux/platform_data/spi-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/regulator/machine.h>
+#include <linux/nvmem-provider.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -409,6 +410,15 @@ static inline void da830_evm_init_lcdc(int mux_mode)
 static inline void da830_evm_init_lcdc(int mux_mode) { }
 #endif
 
+static struct nvmem_cell_lookup da830_evm_mac_address_cell = {
+	.info = {
+		.name = "mac-address",
+		.offset = 0x7f00,
+		.bytes = ETH_ALEN,
+	},
+	.nvmem_name = "1-00500",
+};
+
 static struct at24_platform_data da830_evm_i2c_eeprom_info = {
 	.byte_len	= SZ_256K / 8,
 	.page_size	= 64,
@@ -618,6 +628,8 @@ static __init void da830_evm_init(void)
 		pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret);
 
 	regulator_has_full_constraints();
+
+	nvmem_add_lookup_table(&da830_evm_mac_address_cell, 1);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
-- 
2.17.1

[PATCH v3 07/18] ARM: davinci: mityomapl138: add nvmem cells lookup entries

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support nvmem lookups for machine code. Add a lookup for
mac-address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-mityomapl138.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 37b3e48a21d1..b5be51c0451e 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -21,6 +21,7 @@
 #include <linux/etherdevice.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/nvmem-provider.h>
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
@@ -160,6 +161,25 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 	mityomapl138_cpufreq_init(partnum);
 }
 
+static struct nvmem_cell_lookup mityomapl138_nvmem_cells[] = {
+	{
+		.info = {
+			.name = "factory-config",
+			.offset = 0x0,
+			.bytes = sizeof(struct factory_config),
+		},
+		.nvmem_name = "1-00500",
+	},
+	{
+		.info = {
+			.name = "mac-address",
+			.offset = 0x64,
+			.bytes = ETH_ALEN,
+		},
+		.nvmem_name = "1-00500",
+	}
+};
+
 static struct at24_platform_data mityomapl138_fd_chip = {
 	.byte_len	= 256,
 	.page_size	= 8,
@@ -534,6 +554,8 @@ static void __init mityomapl138_init(void)
 	if (ret)
 		pr_warn("spi 1 registration failed: %d\n", ret);
 
+	nvmem_add_lookup_table(mityomapl138_nvmem_cells,
+			       ARRAY_SIZE(mityomapl138_nvmem_cells));
 	mityomapl138_config_emac();
 
 	ret = da8xx_register_rtc();
-- 
2.17.1

[PATCH v3 07/18] ARM: davinci: mityomapl138: add nvmem cells lookup entries

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support nvmem lookups for machine code. Add a lookup for
mac-address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-mityomapl138.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 37b3e48a21d1..b5be51c0451e 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -21,6 +21,7 @@
 #include <linux/etherdevice.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/nvmem-provider.h>
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
@@ -160,6 +161,25 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 	mityomapl138_cpufreq_init(partnum);
 }
 
+static struct nvmem_cell_lookup mityomapl138_nvmem_cells[] = {
+	{
+		.info = {
+			.name = "factory-config",
+			.offset = 0x0,
+			.bytes = sizeof(struct factory_config),
+		},
+		.nvmem_name = "1-00500",
+	},
+	{
+		.info = {
+			.name = "mac-address",
+			.offset = 0x64,
+			.bytes = ETH_ALEN,
+		},
+		.nvmem_name = "1-00500",
+	}
+};
+
 static struct at24_platform_data mityomapl138_fd_chip = {
 	.byte_len	= 256,
 	.page_size	= 8,
@@ -534,6 +554,8 @@ static void __init mityomapl138_init(void)
 	if (ret)
 		pr_warn("spi 1 registration failed: %d\n", ret);
 
+	nvmem_add_lookup_table(mityomapl138_nvmem_cells,
+			       ARRAY_SIZE(mityomapl138_nvmem_cells));
 	mityomapl138_config_emac();
 
 	ret = da8xx_register_rtc();
-- 
2.17.1

[PATCH v3 08/18] net: davinci_emac: potentially get the MAC address from MTD

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

On da850-evm board we can read the MAC address from MTD. It's currently
done in the relevant board file, but we want to get rid of all the MAC
reading callbacks from the board file (SPI and NAND). Move the reading
of the MAC address from SPI to the emac driver's probe function.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/ti/davinci_emac.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index a1a6445b5a7e..17cfe093b8cf 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -67,7 +67,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_net.h>
 #include <linux/mfd/syscon.h>
-
+#include <linux/mtd/mtd.h>
 #include <asm/irq.h>
 #include <asm/page.h>
 
@@ -1783,7 +1783,10 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	struct cpdma_params dma_params;
 	struct clk *emac_clk;
 	unsigned long emac_bus_frequency;
-
+#ifdef CONFIG_MTD
+	size_t mac_addr_len;
+	struct mtd_info *mtd;
+#endif /* CONFIG_MTD */
 
 	/* obtain emac clock from kernel */
 	emac_clk = devm_clk_get(&pdev->dev, NULL);
@@ -1815,6 +1818,18 @@ static int davinci_emac_probe(struct platform_device *pdev)
 		goto err_free_netdev;
 	}
 
+#ifdef CONFIG_MTD
+	mtd = get_mtd_device_nm("MAC-Address");
+	if (!IS_ERR(mtd)) {
+		rc = mtd_read(mtd, 0, ETH_ALEN,
+			      &mac_addr_len, priv->mac_addr);
+		if (rc == 0)
+			dev_info(&pdev->dev,
+				 "Read MAC addr from SPI Flash: %pM\n",
+				 priv->mac_addr);
+	}
+#endif /* CONFIG_MTD */
+
 	/* MAC addr and PHY mask , RMII enable info from platform_data */
 	memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN);
 	priv->phy_id = pdata->phy_id;
-- 
2.17.1

[PATCH v3 08/18] net: davinci_emac: potentially get the MAC address from MTD

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

On da850-evm board we can read the MAC address from MTD. It's currently
done in the relevant board file, but we want to get rid of all the MAC
reading callbacks from the board file (SPI and NAND). Move the reading
of the MAC address from SPI to the emac driver's probe function.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/ti/davinci_emac.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index a1a6445b5a7e..17cfe093b8cf 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -67,7 +67,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_net.h>
 #include <linux/mfd/syscon.h>
-
+#include <linux/mtd/mtd.h>
 #include <asm/irq.h>
 #include <asm/page.h>
 
@@ -1783,7 +1783,10 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	struct cpdma_params dma_params;
 	struct clk *emac_clk;
 	unsigned long emac_bus_frequency;
-
+#ifdef CONFIG_MTD
+	size_t mac_addr_len;
+	struct mtd_info *mtd;
+#endif /* CONFIG_MTD */
 
 	/* obtain emac clock from kernel */
 	emac_clk = devm_clk_get(&pdev->dev, NULL);
@@ -1815,6 +1818,18 @@ static int davinci_emac_probe(struct platform_device *pdev)
 		goto err_free_netdev;
 	}
 
+#ifdef CONFIG_MTD
+	mtd = get_mtd_device_nm("MAC-Address");
+	if (!IS_ERR(mtd)) {
+		rc = mtd_read(mtd, 0, ETH_ALEN,
+			      &mac_addr_len, priv->mac_addr);
+		if (rc == 0)
+			dev_info(&pdev->dev,
+				 "Read MAC addr from SPI Flash: %pM\n",
+				 priv->mac_addr);
+	}
+#endif /* CONFIG_MTD */
+
 	/* MAC addr and PHY mask , RMII enable info from platform_data */
 	memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN);
 	priv->phy_id = pdata->phy_id;
-- 
2.17.1

[PATCH v3 09/18] ARM: davinci: da850-evm: remove dead MTD code

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We no longer need to register the MTD notifier to read the MAC address
as it's now being done in the emac address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da850-evm.c | 28 -------------------------
 1 file changed, 28 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index e22fb40e34bc..4de075458d83 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -124,32 +124,6 @@ static struct spi_board_info da850evm_spi_info[] = {
 	},
 };
 
-#ifdef CONFIG_MTD
-static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	size_t retlen;
-
-	if (!strcmp(mtd->name, "MAC-Address")) {
-		mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
-		if (retlen == ETH_ALEN)
-			pr_info("Read MAC addr from SPI Flash: %pM\n",
-				mac_addr);
-	}
-}
-
-static struct mtd_notifier da850evm_spi_notifier = {
-	.add	= da850_evm_m25p80_notify_add,
-};
-
-static void da850_evm_setup_mac_addr(void)
-{
-	register_mtd_user(&da850evm_spi_notifier);
-}
-#else
-static void da850_evm_setup_mac_addr(void) { }
-#endif
-
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "bootloaders + env",
@@ -1455,8 +1429,6 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
 
-	da850_evm_setup_mac_addr();
-
 	ret = da8xx_register_rproc();
 	if (ret)
 		pr_warn("%s: dsp/rproc registration failed: %d\n",
-- 
2.17.1

[PATCH v3 09/18] ARM: davinci: da850-evm: remove dead MTD code

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We no longer need to register the MTD notifier to read the MAC address
as it's now being done in the emac address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da850-evm.c | 28 -------------------------
 1 file changed, 28 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index e22fb40e34bc..4de075458d83 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -124,32 +124,6 @@ static struct spi_board_info da850evm_spi_info[] = {
 	},
 };
 
-#ifdef CONFIG_MTD
-static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	size_t retlen;
-
-	if (!strcmp(mtd->name, "MAC-Address")) {
-		mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
-		if (retlen == ETH_ALEN)
-			pr_info("Read MAC addr from SPI Flash: %pM\n",
-				mac_addr);
-	}
-}
-
-static struct mtd_notifier da850evm_spi_notifier = {
-	.add	= da850_evm_m25p80_notify_add,
-};
-
-static void da850_evm_setup_mac_addr(void)
-{
-	register_mtd_user(&da850evm_spi_notifier);
-}
-#else
-static void da850_evm_setup_mac_addr(void) { }
-#endif
-
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "bootloaders + env",
@@ -1455,8 +1429,6 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
 
-	da850_evm_setup_mac_addr();
-
 	ret = da8xx_register_rproc();
 	if (ret)
 		pr_warn("%s: dsp/rproc registration failed: %d\n",
-- 
2.17.1

[PATCH v3 09/18] ARM: davinci: da850-evm: remove dead MTD code

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We no longer need to register the MTD notifier to read the MAC address
as it's now being done in the emac address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da850-evm.c | 28 -------------------------
 1 file changed, 28 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index e22fb40e34bc..4de075458d83 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -124,32 +124,6 @@ static struct spi_board_info da850evm_spi_info[] = {
 	},
 };
 
-#ifdef CONFIG_MTD
-static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	size_t retlen;
-
-	if (!strcmp(mtd->name, "MAC-Address")) {
-		mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
-		if (retlen == ETH_ALEN)
-			pr_info("Read MAC addr from SPI Flash: %pM\n",
-				mac_addr);
-	}
-}
-
-static struct mtd_notifier da850evm_spi_notifier = {
-	.add	= da850_evm_m25p80_notify_add,
-};
-
-static void da850_evm_setup_mac_addr(void)
-{
-	register_mtd_user(&da850evm_spi_notifier);
-}
-#else
-static void da850_evm_setup_mac_addr(void) { }
-#endif
-
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "bootloaders + env",
@@ -1455,8 +1429,6 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
 
-	da850_evm_setup_mac_addr();
-
 	ret = da8xx_register_rproc();
 	if (ret)
 		pr_warn("%s: dsp/rproc registration failed: %d\n",
-- 
2.17.1

[PATCH v3 10/18] net: davinci_emac: use nvmem to retrieve the mac address

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

All users which store the MAC address in EEPROM now register relevant
nvmem cells. Switch to retrieving the MAC address over the nvmem
framework. If we can't get the nvmem cell then fall back to using
the device tree.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/ti/davinci_emac.c | 33 +++++++++++++++++++-------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 17cfe093b8cf..7608169e643f 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -68,6 +68,8 @@
 #include <linux/of_net.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mtd/mtd.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-consumer.h>
 #include <asm/irq.h>
 #include <asm/page.h>
 
@@ -1696,7 +1698,6 @@ davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv)
 	const struct of_device_id *match;
 	const struct emac_platform_data *auxdata;
 	struct emac_platform_data *pdata = NULL;
-	const u8 *mac_addr;
 
 	if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
 		return dev_get_platdata(&pdev->dev);
@@ -1708,12 +1709,6 @@ davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv)
 	np = pdev->dev.of_node;
 	pdata->version = EMAC_VERSION_2;
 
-	if (!is_valid_ether_addr(pdata->mac_addr)) {
-		mac_addr = of_get_mac_address(np);
-		if (mac_addr)
-			ether_addr_copy(pdata->mac_addr, mac_addr);
-	}
-
 	of_property_read_u32(np, "ti,davinci-ctrl-reg-offset",
 			     &pdata->ctrl_reg_offset);
 
@@ -1783,10 +1778,12 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	struct cpdma_params dma_params;
 	struct clk *emac_clk;
 	unsigned long emac_bus_frequency;
-#ifdef CONFIG_MTD
+	const void *mac_addr;
 	size_t mac_addr_len;
+#ifdef CONFIG_MTD
 	struct mtd_info *mtd;
 #endif /* CONFIG_MTD */
+	struct nvmem_cell *cell;
 
 	/* obtain emac clock from kernel */
 	emac_clk = devm_clk_get(&pdev->dev, NULL);
@@ -1830,8 +1827,26 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	}
 #endif /* CONFIG_MTD */
 
+	cell = nvmem_cell_get(&pdev->dev, "mac-address");
+	if (!IS_ERR(cell)) {
+		mac_addr = nvmem_cell_read(cell, &mac_addr_len);
+		if (!IS_ERR(mac_addr)) {
+			if (is_valid_ether_addr(mac_addr)) {
+				dev_info(&pdev->dev,
+					 "Read MAC addr from EEPROM: %pM\n",
+					 mac_addr);
+				ether_addr_copy(priv->mac_addr, mac_addr);
+			}
+			kfree(mac_addr);
+		}
+		nvmem_cell_put(cell);
+	} else {
+		mac_addr = of_get_mac_address(np);
+		if (mac_addr)
+			ether_addr_copy(priv->mac_addr, mac_addr);
+	}
+
 	/* MAC addr and PHY mask , RMII enable info from platform_data */
-	memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN);
 	priv->phy_id = pdata->phy_id;
 	priv->rmii_en = pdata->rmii_en;
 	priv->version = pdata->version;
-- 
2.17.1

[PATCH v3 10/18] net: davinci_emac: use nvmem to retrieve the mac address

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

All users which store the MAC address in EEPROM now register relevant
nvmem cells. Switch to retrieving the MAC address over the nvmem
framework. If we can't get the nvmem cell then fall back to using
the device tree.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/ti/davinci_emac.c | 33 +++++++++++++++++++-------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 17cfe093b8cf..7608169e643f 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -68,6 +68,8 @@
 #include <linux/of_net.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mtd/mtd.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-consumer.h>
 #include <asm/irq.h>
 #include <asm/page.h>
 
@@ -1696,7 +1698,6 @@ davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv)
 	const struct of_device_id *match;
 	const struct emac_platform_data *auxdata;
 	struct emac_platform_data *pdata = NULL;
-	const u8 *mac_addr;
 
 	if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
 		return dev_get_platdata(&pdev->dev);
@@ -1708,12 +1709,6 @@ davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv)
 	np = pdev->dev.of_node;
 	pdata->version = EMAC_VERSION_2;
 
-	if (!is_valid_ether_addr(pdata->mac_addr)) {
-		mac_addr = of_get_mac_address(np);
-		if (mac_addr)
-			ether_addr_copy(pdata->mac_addr, mac_addr);
-	}
-
 	of_property_read_u32(np, "ti,davinci-ctrl-reg-offset",
 			     &pdata->ctrl_reg_offset);
 
@@ -1783,10 +1778,12 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	struct cpdma_params dma_params;
 	struct clk *emac_clk;
 	unsigned long emac_bus_frequency;
-#ifdef CONFIG_MTD
+	const void *mac_addr;
 	size_t mac_addr_len;
+#ifdef CONFIG_MTD
 	struct mtd_info *mtd;
 #endif /* CONFIG_MTD */
+	struct nvmem_cell *cell;
 
 	/* obtain emac clock from kernel */
 	emac_clk = devm_clk_get(&pdev->dev, NULL);
@@ -1830,8 +1827,26 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	}
 #endif /* CONFIG_MTD */
 
+	cell = nvmem_cell_get(&pdev->dev, "mac-address");
+	if (!IS_ERR(cell)) {
+		mac_addr = nvmem_cell_read(cell, &mac_addr_len);
+		if (!IS_ERR(mac_addr)) {
+			if (is_valid_ether_addr(mac_addr)) {
+				dev_info(&pdev->dev,
+					 "Read MAC addr from EEPROM: %pM\n",
+					 mac_addr);
+				ether_addr_copy(priv->mac_addr, mac_addr);
+			}
+			kfree(mac_addr);
+		}
+		nvmem_cell_put(cell);
+	} else {
+		mac_addr = of_get_mac_address(np);
+		if (mac_addr)
+			ether_addr_copy(priv->mac_addr, mac_addr);
+	}
+
 	/* MAC addr and PHY mask , RMII enable info from platform_data */
-	memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN);
 	priv->phy_id = pdata->phy_id;
 	priv->rmii_en = pdata->rmii_en;
 	priv->version = pdata->version;
-- 
2.17.1

[PATCH v3 11/18] ARM: davinci: mityomapl138: don't read the MAC address from machine code

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This is now done by the emac driver using a registered nvmem cell.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-mityomapl138.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index b5be51c0451e..5c0a0557a361 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -120,7 +120,6 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 {
 	int ret;
 	const char *partnum = NULL;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	if (!IS_BUILTIN(CONFIG_NVMEM)) {
 		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
@@ -146,13 +145,6 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 		goto bad_config;
 	}
 
-	pr_info("Found MAC = %pM\n", factory_config.mac);
-	if (is_valid_ether_addr(factory_config.mac))
-		memcpy(soc_info->emac_pdata->mac_addr,
-			factory_config.mac, ETH_ALEN);
-	else
-		pr_warn("Invalid MAC found in factory config block\n");
-
 	partnum = factory_config.partnum;
 	pr_info("Part Number = %s\n", partnum);
 
-- 
2.17.1

[PATCH v3 11/18] ARM: davinci: mityomapl138: don't read the MAC address from machine code

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This is now done by the emac driver using a registered nvmem cell.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-mityomapl138.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index b5be51c0451e..5c0a0557a361 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -120,7 +120,6 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 {
 	int ret;
 	const char *partnum = NULL;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	if (!IS_BUILTIN(CONFIG_NVMEM)) {
 		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
@@ -146,13 +145,6 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 		goto bad_config;
 	}
 
-	pr_info("Found MAC = %pM\n", factory_config.mac);
-	if (is_valid_ether_addr(factory_config.mac))
-		memcpy(soc_info->emac_pdata->mac_addr,
-			factory_config.mac, ETH_ALEN);
-	else
-		pr_warn("Invalid MAC found in factory config block\n");
-
 	partnum = factory_config.partnum;
 	pr_info("Part Number = %s\n", partnum);
 
-- 
2.17.1

[PATCH v3 11/18] ARM: davinci: mityomapl138: don't read the MAC address from machine code

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This is now done by the emac driver using a registered nvmem cell.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-mityomapl138.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index b5be51c0451e..5c0a0557a361 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -120,7 +120,6 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 {
 	int ret;
 	const char *partnum = NULL;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	if (!IS_BUILTIN(CONFIG_NVMEM)) {
 		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
@@ -146,13 +145,6 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 		goto bad_config;
 	}
 
-	pr_info("Found MAC = %pM\n", factory_config.mac);
-	if (is_valid_ether_addr(factory_config.mac))
-		memcpy(soc_info->emac_pdata->mac_addr,
-			factory_config.mac, ETH_ALEN);
-	else
-		pr_warn("Invalid MAC found in factory config block\n");
-
 	partnum = factory_config.partnum;
 	pr_info("Part Number = %s\n", partnum);
 
-- 
2.17.1

[PATCH v3 12/18] ARM: davinci: dm365-evm: use device properties for at24 eeprom

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to work towards phasing out the at24_platform_data structure.
There are few users and its contents can be represented using generic
device properties. Using device properties only will allow us to
significantly simplify the at24 configuration code.

Remove the at24_platform_data structure and replace it with an array
of property entries. Drop the byte_len/size property, as the model name
already implies the EEPROM's size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index cb0ac92a278e..b360d26e6caa 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -18,7 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -179,18 +179,15 @@ static struct nvmem_cell_lookup dm365evm_mac_address_cell = {
 	.nvmem_name = "1-00500",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 static struct i2c_board_info i2c_info[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-- 
2.17.1

[PATCH v3 12/18] ARM: davinci: dm365-evm: use device properties for at24 eeprom

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to work towards phasing out the at24_platform_data structure.
There are few users and its contents can be represented using generic
device properties. Using device properties only will allow us to
significantly simplify the at24 configuration code.

Remove the at24_platform_data structure and replace it with an array
of property entries. Drop the byte_len/size property, as the model name
already implies the EEPROM's size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index cb0ac92a278e..b360d26e6caa 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -18,7 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -179,18 +179,15 @@ static struct nvmem_cell_lookup dm365evm_mac_address_cell = {
 	.nvmem_name = "1-00500",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 static struct i2c_board_info i2c_info[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-- 
2.17.1

[PATCH v3 13/18] ARM: davinci: da830-evm: use device properties for at24 eeprom

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to work towards phasing out the at24_platform_data structure.
There are few users and its contents can be represented using generic
device properties. Using device properties only will allow us to
significantly simplify the at24 configuration code.

Remove the at24_platform_data structure and replace it with an array
of property entries. Drop the byte_len/size property, as the model name
already implies the EEPROM's size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da830-evm.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 4a2fe8142a2f..08a23e777eca 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
@@ -419,12 +419,9 @@ static struct nvmem_cell_lookup da830_evm_mac_address_cell = {
 	.nvmem_name = "1-00500",
 };
 
-static struct at24_platform_data da830_evm_i2c_eeprom_info = {
-	.byte_len	= SZ_256K / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup		= davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
@@ -458,7 +455,7 @@ static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
 static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &da830_evm_i2c_eeprom_info,
+		.properties = da830_evm_i2c_eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-- 
2.17.1

[PATCH v3 13/18] ARM: davinci: da830-evm: use device properties for at24 eeprom

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to work towards phasing out the at24_platform_data structure.
There are few users and its contents can be represented using generic
device properties. Using device properties only will allow us to
significantly simplify the at24 configuration code.

Remove the at24_platform_data structure and replace it with an array
of property entries. Drop the byte_len/size property, as the model name
already implies the EEPROM's size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da830-evm.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 4a2fe8142a2f..08a23e777eca 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
@@ -419,12 +419,9 @@ static struct nvmem_cell_lookup da830_evm_mac_address_cell = {
 	.nvmem_name = "1-00500",
 };
 
-static struct at24_platform_data da830_evm_i2c_eeprom_info = {
-	.byte_len	= SZ_256K / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup		= davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
@@ -458,7 +455,7 @@ static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
 static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &da830_evm_i2c_eeprom_info,
+		.properties = da830_evm_i2c_eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-- 
2.17.1

[PATCH v3 14/18] ARM: davinci: dm644x-evm: use device properties for at24 eeprom

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to work towards phasing out the at24_platform_data structure.
There are few users and its contents can be represented using generic
device properties. Using device properties only will allow us to
significantly simplify the at24 configuration code.

Remove the at24_platform_data structure and replace it with an array
of property entries. Drop the byte_len/size property, as the model name
already implies the EEPROM's size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 6d35c6e1b0bd..abfcf42da6fb 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,8 +16,8 @@
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/at24.h>
 #include <linux/platform_data/gpio-davinci.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -486,12 +486,8 @@ static struct nvmem_cell_lookup dm6446evm_mac_address_cell = {
 	.nvmem_name = "1-00500",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (256*1024) / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
 };
 
 /*
@@ -601,7 +597,7 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic33", 0x1b),
-- 
2.17.1

[PATCH v3 14/18] ARM: davinci: dm644x-evm: use device properties for at24 eeprom

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to work towards phasing out the at24_platform_data structure.
There are few users and its contents can be represented using generic
device properties. Using device properties only will allow us to
significantly simplify the at24 configuration code.

Remove the at24_platform_data structure and replace it with an array
of property entries. Drop the byte_len/size property, as the model name
already implies the EEPROM's size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 6d35c6e1b0bd..abfcf42da6fb 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,8 +16,8 @@
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/at24.h>
 #include <linux/platform_data/gpio-davinci.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -486,12 +486,8 @@ static struct nvmem_cell_lookup dm6446evm_mac_address_cell = {
 	.nvmem_name = "1-00500",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (256*1024) / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
 };
 
 /*
@@ -601,7 +597,7 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic33", 0x1b),
-- 
2.17.1

[PATCH v3 15/18] ARM: davinci: dm646x-evm: use device properties for at24 eeprom

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to work towards phasing out the at24_platform_data structure.
There are few users and its contents can be represented using generic
device properties. Using device properties only will allow us to
significantly simplify the at24 configuration code.

Remove the at24_platform_data structure and replace it with an array
of property entries. Drop the byte_len/size property, as the model name
already implies the EEPROM's size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm646x-evm.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 5a9de47bc8a2..5049f0c6cd1a 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/platform_data/pcf857x.h>
 
 #include <media/i2c/tvp514x.h>
@@ -320,12 +320,9 @@ static struct nvmem_cell_lookup dm646x_evm_mac_address_cell = {
 	.nvmem_name = "1-00500",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 #endif
 
@@ -396,7 +393,7 @@ static void evm_init_cpld(void)
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data  = &eeprom_info,
+		.properties  = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("pcf8574a", 0x38),
-- 
2.17.1

[PATCH v3 15/18] ARM: davinci: dm646x-evm: use device properties for at24 eeprom

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to work towards phasing out the at24_platform_data structure.
There are few users and its contents can be represented using generic
device properties. Using device properties only will allow us to
significantly simplify the at24 configuration code.

Remove the at24_platform_data structure and replace it with an array
of property entries. Drop the byte_len/size property, as the model name
already implies the EEPROM's size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm646x-evm.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 5a9de47bc8a2..5049f0c6cd1a 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/platform_data/pcf857x.h>
 
 #include <media/i2c/tvp514x.h>
@@ -320,12 +320,9 @@ static struct nvmem_cell_lookup dm646x_evm_mac_address_cell = {
 	.nvmem_name = "1-00500",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 #endif
 
@@ -396,7 +393,7 @@ static void evm_init_cpld(void)
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data  = &eeprom_info,
+		.properties  = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("pcf8574a", 0x38),
-- 
2.17.1

[PATCH v3 16/18] ARM: davinci: sffsdr: fix the at24 eeprom device name

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

The currently used 24lc64 i2c device name doesn't match against any
of the devices supported by the at24 driver. Change it to the closest
compatible chip.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-sffsdr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index e7c1728b0833..f6a4d094cbc3 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -100,7 +100,7 @@ static struct at24_platform_data eeprom_info = {
 
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
-		I2C_BOARD_INFO("24lc64", 0x50),
+		I2C_BOARD_INFO("24c64", 0x50),
 		.platform_data	= &eeprom_info,
 	},
 	/* Other I2C devices:
-- 
2.17.1

[PATCH v3 16/18] ARM: davinci: sffsdr: fix the at24 eeprom device name

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

The currently used 24lc64 i2c device name doesn't match against any
of the devices supported by the at24 driver. Change it to the closest
compatible chip.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-sffsdr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index e7c1728b0833..f6a4d094cbc3 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -100,7 +100,7 @@ static struct at24_platform_data eeprom_info = {
 
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
-		I2C_BOARD_INFO("24lc64", 0x50),
+		I2C_BOARD_INFO("24c64", 0x50),
 		.platform_data	= &eeprom_info,
 	},
 	/* Other I2C devices:
-- 
2.17.1

[PATCH v3 17/18] ARM: davinci: sffsdr: use device properties for at24 eeprom

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to work towards phasing out the at24_platform_data structure.
There are few users and its contents can be represented using generic
device properties. Using device properties only will allow us to
significantly simplify the at24 configuration code.

Remove the at24_platform_data structure and replace it with an array
of property entries. Drop the byte_len/size property, as the model name
already implies the EEPROM's size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-sffsdr.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index f6a4d094cbc3..680e5d7628a8 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -92,16 +92,15 @@ static struct platform_device davinci_sffsdr_nandflash_device = {
 	.resource	= davinci_sffsdr_nandflash_resource,
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (64*1024) / 8,
-	.page_size	= 32,
-	.flags		= AT24_FLAG_ADDR16,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 32),
+	{ },
 };
 
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c64", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	/* Other I2C devices:
 	 * MSP430,  addr 0x23 (not used)
-- 
2.17.1

[PATCH v3 17/18] ARM: davinci: sffsdr: use device properties for at24 eeprom

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to work towards phasing out the at24_platform_data structure.
There are few users and its contents can be represented using generic
device properties. Using device properties only will allow us to
significantly simplify the at24 configuration code.

Remove the at24_platform_data structure and replace it with an array
of property entries. Drop the byte_len/size property, as the model name
already implies the EEPROM's size.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-sffsdr.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index f6a4d094cbc3..680e5d7628a8 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -92,16 +92,15 @@ static struct platform_device davinci_sffsdr_nandflash_device = {
 	.resource	= davinci_sffsdr_nandflash_resource,
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (64*1024) / 8,
-	.page_size	= 32,
-	.flags		= AT24_FLAG_ADDR16,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 32),
+	{ },
 };
 
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c64", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	/* Other I2C devices:
 	 * MSP430,  addr 0x23 (not used)
-- 
2.17.1

[PATCH v3 18/18] ARM: davinci: remove dead code related to MAC address reading

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

There are no more users of davinci_get_mac_addr(). Remove it. Also
remove the mac_addr field from the emac platform data struct.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/common.c | 15 ---------------
 include/linux/davinci_emac.h   |  2 --
 2 files changed, 17 deletions(-)

diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index bcb6a7ba84e9..0c6cc354a4aa 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -28,21 +28,6 @@ EXPORT_SYMBOL(davinci_soc_info);
 void __iomem *davinci_intc_base;
 int davinci_intc_type;
 
-void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	off_t offset = (off_t)context;
-
-	if (!IS_BUILTIN(CONFIG_NVMEM)) {
-		pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n");
-		return;
-	}
-
-	/* Read MAC addr from EEPROM */
-	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
-		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
-}
-
 static int __init davinci_init_id(struct davinci_soc_info *soc_info)
 {
 	int			i;
diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
index 05b97144d342..19888b27706d 100644
--- a/include/linux/davinci_emac.h
+++ b/include/linux/davinci_emac.h
@@ -19,7 +19,6 @@ struct mdio_platform_data {
 };
 
 struct emac_platform_data {
-	char mac_addr[ETH_ALEN];
 	u32 ctrl_reg_offset;
 	u32 ctrl_mod_reg_offset;
 	u32 ctrl_ram_offset;
@@ -46,5 +45,4 @@ enum {
 	EMAC_VERSION_2,	/* DM646x */
 };
 
-void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context);
 #endif
-- 
2.17.1

[PATCH v3 18/18] ARM: davinci: remove dead code related to MAC address reading

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

There are no more users of davinci_get_mac_addr(). Remove it. Also
remove the mac_addr field from the emac platform data struct.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/common.c | 15 ---------------
 include/linux/davinci_emac.h   |  2 --
 2 files changed, 17 deletions(-)

diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index bcb6a7ba84e9..0c6cc354a4aa 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -28,21 +28,6 @@ EXPORT_SYMBOL(davinci_soc_info);
 void __iomem *davinci_intc_base;
 int davinci_intc_type;
 
-void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	off_t offset = (off_t)context;
-
-	if (!IS_BUILTIN(CONFIG_NVMEM)) {
-		pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n");
-		return;
-	}
-
-	/* Read MAC addr from EEPROM */
-	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
-		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
-}
-
 static int __init davinci_init_id(struct davinci_soc_info *soc_info)
 {
 	int			i;
diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
index 05b97144d342..19888b27706d 100644
--- a/include/linux/davinci_emac.h
+++ b/include/linux/davinci_emac.h
@@ -19,7 +19,6 @@ struct mdio_platform_data {
 };
 
 struct emac_platform_data {
-	char mac_addr[ETH_ALEN];
 	u32 ctrl_reg_offset;
 	u32 ctrl_mod_reg_offset;
 	u32 ctrl_ram_offset;
@@ -46,5 +45,4 @@ enum {
 	EMAC_VERSION_2,	/* DM646x */
 };
 
-void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context);
 #endif
-- 
2.17.1

Re: [PATCH v3 00/18] ARM: davinci: step towards removing at24_platform_data

[Bartosz Golaszewski]

2018-06-28 16:32 GMT+02:00 Bartosz Golaszewski <brgl@bgdev.pl>:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> Since I took over maintainership of the at24 driver I've been working
> towards removing at24_platform_data in favor for device properties.
>
> DaVinci is the only platform that's still using it - all other users
> have already been converted.
>
> One of the obstacles in case of DaVinci is removing the setup() callback
> from the pdata struct, the only user of which are some davinci boards.
>
> Most boards use the EEPROM to store the MAC address. This series adds
> support for cell lookups to the nvmem framework, registers relevant
> cells for all users, converts the davinci_emac driver to using them
> and replaces at24_platform_data with device properties.
>
> The only board that's still using this callback is now mityomapl138.
> Unfortunately it stores more info in EEPROM than just the MAC address
> and will require some more work. Unfortunately I don't have access
> to this board so I can't test any actual solutions on a live hardware.
>
> Tested on a dm365-evm board.
>
> v1 -> v2:
> - for backward compatiblity: fall back to using of_get_mac_address() if
>   we can't get an nvmem cell in patch 7
> - add patch 15 which removes dead code
>
> v2 -> v3:
> - documented new nvmem cell lookup API
> - renamed the nvmem cell lookup routines
> - in order to completly remove the mac_addr from davinci's soc_info
>   added a patch that moves reading the MAC address from SPI to the emac
>   driver
> - removed more dead code
>
> Bartosz Golaszewski (18):
>   nvmem: add support for cell lookups
>   Documentation: nvmem: document lookup entries
>   ARM: davinci: dm365-evm: use nvmem lookup for mac address
>   ARM: davinci: dm644-evm: use nvmem lookup for mac address
>   ARM: davinci: dm646x-evm: use nvmem lookup for mac address
>   ARM: davinci: da830-evm: use nvmem lookup for mac address
>   ARM: davinci: mityomapl138: add nvmem cells lookup entries
>   net: davinci_emac: potentially get the MAC address from MTD
>   ARM: davinci: da850-evm: remove dead MTD code
>   net: davinci_emac: use nvmem to retrieve the mac address
>   ARM: davinci: mityomapl138: don't read the MAC address from machine
>     code
>   ARM: davinci: dm365-evm: use device properties for at24 eeprom
>   ARM: davinci: da830-evm: use device properties for at24 eeprom
>   ARM: davinci: dm644x-evm: use device properties for at24 eeprom
>   ARM: davinci: dm646x-evm: use device properties for at24 eeprom
>   ARM: davinci: sffsdr: fix the at24 eeprom device name
>   ARM: davinci: sffsdr: use device properties for at24 eeprom
>   ARM: davinci: remove dead code related to MAC address reading
>
>  Documentation/nvmem/nvmem.txt              | 28 ++++++++
>  arch/arm/mach-davinci/board-da830-evm.c    | 25 +++++---
>  arch/arm/mach-davinci/board-da850-evm.c    | 28 --------
>  arch/arm/mach-davinci/board-dm365-evm.c    | 25 +++++---
>  arch/arm/mach-davinci/board-dm644x-evm.c   | 24 ++++---
>  arch/arm/mach-davinci/board-dm646x-evm.c   | 25 +++++---
>  arch/arm/mach-davinci/board-mityomapl138.c | 30 ++++++---
>  arch/arm/mach-davinci/board-sffsdr.c       | 13 ++--
>  arch/arm/mach-davinci/common.c             | 15 -----
>  drivers/net/ethernet/ti/davinci_emac.c     | 50 ++++++++++++---
>  drivers/nvmem/core.c                       | 75 +++++++++++++++++++++-
>  include/linux/davinci_emac.h               |  2 -
>  include/linux/nvmem-consumer.h             |  6 ++
>  include/linux/nvmem-provider.h             | 10 +++
>  14 files changed, 253 insertions(+), 103 deletions(-)
>
> --
> 2.17.1
>

Superseded by v4 - I noticed some more issues with the series that
needed fixing.

Bart

[PATCH v3 00/18] ARM: davinci: step towards removing at24_platform_data

[Bartosz Golaszewski]

2018-06-28 16:32 GMT+02:00 Bartosz Golaszewski <brgl@bgdev.pl>:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> Since I took over maintainership of the at24 driver I've been working
> towards removing at24_platform_data in favor for device properties.
>
> DaVinci is the only platform that's still using it - all other users
> have already been converted.
>
> One of the obstacles in case of DaVinci is removing the setup() callback
> from the pdata struct, the only user of which are some davinci boards.
>
> Most boards use the EEPROM to store the MAC address. This series adds
> support for cell lookups to the nvmem framework, registers relevant
> cells for all users, converts the davinci_emac driver to using them
> and replaces at24_platform_data with device properties.
>
> The only board that's still using this callback is now mityomapl138.
> Unfortunately it stores more info in EEPROM than just the MAC address
> and will require some more work. Unfortunately I don't have access
> to this board so I can't test any actual solutions on a live hardware.
>
> Tested on a dm365-evm board.
>
> v1 -> v2:
> - for backward compatiblity: fall back to using of_get_mac_address() if
>   we can't get an nvmem cell in patch 7
> - add patch 15 which removes dead code
>
> v2 -> v3:
> - documented new nvmem cell lookup API
> - renamed the nvmem cell lookup routines
> - in order to completly remove the mac_addr from davinci's soc_info
>   added a patch that moves reading the MAC address from SPI to the emac
>   driver
> - removed more dead code
>
> Bartosz Golaszewski (18):
>   nvmem: add support for cell lookups
>   Documentation: nvmem: document lookup entries
>   ARM: davinci: dm365-evm: use nvmem lookup for mac address
>   ARM: davinci: dm644-evm: use nvmem lookup for mac address
>   ARM: davinci: dm646x-evm: use nvmem lookup for mac address
>   ARM: davinci: da830-evm: use nvmem lookup for mac address
>   ARM: davinci: mityomapl138: add nvmem cells lookup entries
>   net: davinci_emac: potentially get the MAC address from MTD
>   ARM: davinci: da850-evm: remove dead MTD code
>   net: davinci_emac: use nvmem to retrieve the mac address
>   ARM: davinci: mityomapl138: don't read the MAC address from machine
>     code
>   ARM: davinci: dm365-evm: use device properties for at24 eeprom
>   ARM: davinci: da830-evm: use device properties for at24 eeprom
>   ARM: davinci: dm644x-evm: use device properties for at24 eeprom
>   ARM: davinci: dm646x-evm: use device properties for at24 eeprom
>   ARM: davinci: sffsdr: fix the at24 eeprom device name
>   ARM: davinci: sffsdr: use device properties for at24 eeprom
>   ARM: davinci: remove dead code related to MAC address reading
>
>  Documentation/nvmem/nvmem.txt              | 28 ++++++++
>  arch/arm/mach-davinci/board-da830-evm.c    | 25 +++++---
>  arch/arm/mach-davinci/board-da850-evm.c    | 28 --------
>  arch/arm/mach-davinci/board-dm365-evm.c    | 25 +++++---
>  arch/arm/mach-davinci/board-dm644x-evm.c   | 24 ++++---
>  arch/arm/mach-davinci/board-dm646x-evm.c   | 25 +++++---
>  arch/arm/mach-davinci/board-mityomapl138.c | 30 ++++++---
>  arch/arm/mach-davinci/board-sffsdr.c       | 13 ++--
>  arch/arm/mach-davinci/common.c             | 15 -----
>  drivers/net/ethernet/ti/davinci_emac.c     | 50 ++++++++++++---
>  drivers/nvmem/core.c                       | 75 +++++++++++++++++++++-
>  include/linux/davinci_emac.h               |  2 -
>  include/linux/nvmem-consumer.h             |  6 ++
>  include/linux/nvmem-provider.h             | 10 +++
>  14 files changed, 253 insertions(+), 103 deletions(-)
>
> --
> 2.17.1
>

Superseded by v4 - I noticed some more issues with the series that
needed fixing.

Bart