From: Andrew Jeffery <andrew@aj.id.au>
To: linux-kernel@vger.kernel.org
Cc: Andrew Jeffery <andrew@aj.id.au>,
robh+dt@kernel.org, mark.rutland@arm.com, joel@jms.id.au,
gregkh@linuxfoundation.org, Eugene.Cho@dell.com,
a.amelkin@yadro.com, stewart@linux.ibm.com,
benh@kernel.crashing.org, openbmc@lists.ozlabs.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 4/4] dts: aspeed-g5: Add bmc-misc-ctrl nodes to devicetree
Date: Tue, 3 Jul 2018 17:04:13 +1000 [thread overview]
Message-ID: <20180703070413.28756-5-andrew@aj.id.au> (raw)
In-Reply-To: <20180703070413.28756-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 192 +++++++++++++++++++++++++++++++
1 file changed, 192 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 17f2714d18a7..57d477e17c0c 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -187,6 +187,77 @@
aspeed,external-nodes = <&gfx &lhc>;
};
+
+ field@2c.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x2c>;
+ mask = <0x00030000>;
+ label = "dac-mux";
+ };
+
+ field@50.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x50>;
+ mask = <0xffffffff>;
+ label = "vga0";
+ read-only;
+ };
+
+ field@54.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x54>;
+ mask = <0xffffffff>;
+ label = "vga1";
+ read-only;
+ };
+
+ field@58.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x58>;
+ mask = <0xffffffff>;
+ label = "vga2";
+ read-only;
+ };
+
+ field@5c.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x5c>;
+ mask = <0xffffffff>;
+ label = "vga3";
+ read-only;
+ };
+
+ field@60.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x60>;
+ mask = <0xffffffff>;
+ label = "vga4";
+ read-only;
+ };
+
+ field@64.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x64>;
+ mask = <0xffffffff>;
+ label = "vga5";
+ read-only;
+ };
+
+ field@68.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x68>;
+ mask = <0xffffffff>;
+ label = "vga6";
+ read-only;
+ };
+
+ field@6c.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x6c>;
+ mask = <0xffffffff>;
+ label = "vga7";
+ read-only;
+ };
};
rng: hwrng@1e6e2078 {
@@ -343,6 +414,127 @@
#reset-cells = <1>;
};
+ field@f0.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0 24 8>;
+ mask = <0xff000000>;
+ label = "sio-2b";
+ };
+
+ field@f0.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0>;
+ mask = <0x00ff0000>;
+ label = "sio-2a";
+ };
+
+ field@f0.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0>;
+ mask = <0x0000ff00>;
+ bit-shift = <8>;
+ label = "sio-29";
+ };
+
+ field@f0.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0>;
+ mask = <0x000000ff>;
+ label = "sio-28";
+ };
+
+ field@f4.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0xff000000>;
+ label = "sio-2f";
+ };
+
+ field@f4.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0x00ff0000>;
+ label = "sio-2e";
+ };
+
+ field@f4.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0x0000ff00>;
+ label = "sio-2d";
+ };
+
+ field@f4.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0x000000ff>;
+ label = "sio-2c";
+ };
+
+ field@f8.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0xff000000>;
+ read-only;
+ label = "sio-23";
+ };
+
+ field@f8.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0x00ff0000>;
+ read-only;
+ label = "sio-22";
+ };
+
+ field@f8.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0x0000ff00>;
+ read-only;
+ label = "sio-21";
+ };
+
+ field@f8.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0x000000ff>;
+ read-only;
+ label = "sio-20";
+ };
+
+ field@fc.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0xff000000>;
+ read-only;
+ label = "sio-27";
+ };
+
+ field@fc.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0x00ff0000>;
+ read-only;
+ label = "sio-26";
+ };
+
+ field@fc.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0x0000ff00>;
+ read-only;
+ label = "sio-25";
+ };
+
+ field@fc.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0x000000ff>;
+ read-only;
+ label = "sio-24";
+ };
+
ibt: ibt@c0 {
compatible = "aspeed,ast2500-ibt-bmc";
reg = <0xc0 0x18>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: andrew@aj.id.au (Andrew Jeffery)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 4/4] dts: aspeed-g5: Add bmc-misc-ctrl nodes to devicetree
Date: Tue, 3 Jul 2018 17:04:13 +1000 [thread overview]
Message-ID: <20180703070413.28756-5-andrew@aj.id.au> (raw)
In-Reply-To: <20180703070413.28756-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 192 +++++++++++++++++++++++++++++++
1 file changed, 192 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 17f2714d18a7..57d477e17c0c 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -187,6 +187,77 @@
aspeed,external-nodes = <&gfx &lhc>;
};
+
+ field at 2c.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x2c>;
+ mask = <0x00030000>;
+ label = "dac-mux";
+ };
+
+ field at 50.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x50>;
+ mask = <0xffffffff>;
+ label = "vga0";
+ read-only;
+ };
+
+ field at 54.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x54>;
+ mask = <0xffffffff>;
+ label = "vga1";
+ read-only;
+ };
+
+ field at 58.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x58>;
+ mask = <0xffffffff>;
+ label = "vga2";
+ read-only;
+ };
+
+ field at 5c.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x5c>;
+ mask = <0xffffffff>;
+ label = "vga3";
+ read-only;
+ };
+
+ field at 60.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x60>;
+ mask = <0xffffffff>;
+ label = "vga4";
+ read-only;
+ };
+
+ field at 64.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x64>;
+ mask = <0xffffffff>;
+ label = "vga5";
+ read-only;
+ };
+
+ field at 68.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x68>;
+ mask = <0xffffffff>;
+ label = "vga6";
+ read-only;
+ };
+
+ field at 6c.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0x6c>;
+ mask = <0xffffffff>;
+ label = "vga7";
+ read-only;
+ };
};
rng: hwrng at 1e6e2078 {
@@ -343,6 +414,127 @@
#reset-cells = <1>;
};
+ field at f0.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0 24 8>;
+ mask = <0xff000000>;
+ label = "sio-2b";
+ };
+
+ field at f0.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0>;
+ mask = <0x00ff0000>;
+ label = "sio-2a";
+ };
+
+ field at f0.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0>;
+ mask = <0x0000ff00>;
+ bit-shift = <8>;
+ label = "sio-29";
+ };
+
+ field at f0.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf0>;
+ mask = <0x000000ff>;
+ label = "sio-28";
+ };
+
+ field at f4.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0xff000000>;
+ label = "sio-2f";
+ };
+
+ field at f4.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0x00ff0000>;
+ label = "sio-2e";
+ };
+
+ field at f4.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0x0000ff00>;
+ label = "sio-2d";
+ };
+
+ field at f4.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf4>;
+ mask = <0x000000ff>;
+ label = "sio-2c";
+ };
+
+ field at f8.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0xff000000>;
+ read-only;
+ label = "sio-23";
+ };
+
+ field at f8.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0x00ff0000>;
+ read-only;
+ label = "sio-22";
+ };
+
+ field at f8.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0x0000ff00>;
+ read-only;
+ label = "sio-21";
+ };
+
+ field at f8.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xf8>;
+ mask = <0x000000ff>;
+ read-only;
+ label = "sio-20";
+ };
+
+ field at fc.24 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0xff000000>;
+ read-only;
+ label = "sio-27";
+ };
+
+ field at fc.16 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0x00ff0000>;
+ read-only;
+ label = "sio-26";
+ };
+
+ field at fc.8 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0x0000ff00>;
+ read-only;
+ label = "sio-25";
+ };
+
+ field at fc.0 {
+ compatible = "bmc-misc-ctrl";
+ offset = <0xfc>;
+ mask = <0x000000ff>;
+ read-only;
+ label = "sio-24";
+ };
+
ibt: ibt at c0 {
compatible = "aspeed,ast2500-ibt-bmc";
reg = <0xc0 0x18>;
--
2.17.1
next prev parent reply other threads:[~2018-07-03 7:05 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-03 7:04 [RFC PATCH 0/4] sysfs interface to miscellaneous BMC controls and fields Andrew Jeffery
2018-07-03 7:04 ` Andrew Jeffery
2018-07-03 7:04 ` [RFC PATCH 1/4] dts: misc: Add bindings documentation for bmc-misc-ctrl Andrew Jeffery
2018-07-03 7:04 ` Andrew Jeffery
2018-07-03 7:50 ` Greg KH
2018-07-03 7:50 ` Greg KH
2018-07-03 14:16 ` Benjamin Herrenschmidt
2018-07-03 14:16 ` Benjamin Herrenschmidt
2018-07-03 14:16 ` Benjamin Herrenschmidt
2018-07-03 14:31 ` Greg KH
2018-07-03 14:31 ` Greg KH
2018-07-03 15:39 ` Benjamin Herrenschmidt
2018-07-03 15:39 ` Benjamin Herrenschmidt
2018-07-03 15:39 ` Benjamin Herrenschmidt
2018-07-04 6:28 ` Andrew Jeffery
2018-07-04 6:28 ` Andrew Jeffery
2018-07-04 6:28 ` Andrew Jeffery
2018-07-03 7:04 ` [RFC PATCH 2/4] Documentation: ABI: Add sysfs-class-bmc documentation to testing Andrew Jeffery
2018-07-03 7:04 ` Andrew Jeffery
2018-07-03 7:50 ` Greg KH
2018-07-03 7:50 ` Greg KH
2018-07-03 7:50 ` Greg KH
2018-07-04 6:29 ` Andrew Jeffery
2018-07-04 6:29 ` Andrew Jeffery
2018-07-03 7:04 ` [RFC PATCH 3/4] misc: Add bmc-misc-ctrl Andrew Jeffery
2018-07-03 7:04 ` Andrew Jeffery
2018-07-03 7:54 ` Greg KH
2018-07-03 7:54 ` Greg KH
2018-07-04 7:18 ` Andrew Jeffery
2018-07-04 7:18 ` Andrew Jeffery
2018-07-03 7:04 ` Andrew Jeffery [this message]
2018-07-03 7:04 ` [RFC PATCH 4/4] dts: aspeed-g5: Add bmc-misc-ctrl nodes to devicetree Andrew Jeffery
2018-07-03 7:54 ` Greg KH
2018-07-03 7:54 ` Greg KH
2018-07-04 6:29 ` Andrew Jeffery
2018-07-04 6:29 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180703070413.28756-5-andrew@aj.id.au \
--to=andrew@aj.id.au \
--cc=Eugene.Cho@dell.com \
--cc=a.amelkin@yadro.com \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=stewart@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.