All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Wenyou Yang <wenyou.yang@microchip.com>,
	Josh Wu <rainyfeeling@outlook.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Kamal Dasu <kdasu.kdev@gmail.com>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Han Xu <han.xu@nxp.com>, Harvey Hunt <harveyhuntnexus@gmail.com>,
	Vladimir Zapolskiy <vz@mleia.com>,
	Sylvain Lemieux <slemieux.tyco@gmail.com>,
	Xiaolei Li <xiaolei.li@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Marc Gonzalez <marc.w.gonzalez@free.fr>,
	Mans Rullgard <mans@mansr.com>, Stefan Agner <stefan@agner.ch>
Cc: linux-mtd@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-mediatek@lists.infradead.org
Subject: [PATCH v2 13/32] mtd: rawnand: lpc32xx_slc: convert driver to nand_scan()
Date: Wed,  4 Jul 2018 00:00:10 +0200	[thread overview]
Message-ID: <20180703220029.19565-14-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180703220029.19565-1-miquel.raynal@bootlin.com>

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/lpc32xx_slc.c | 73 ++++++++++++++++++++------------------
 1 file changed, 38 insertions(+), 35 deletions(-)

diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index 42820aa1abab..c31efac1f9f5 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -779,6 +779,42 @@ static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
 	return ncfg;
 }
 
+static int lpc32xx_nand_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
+
+	/* OOB and ECC CPU and DMA work areas */
+	host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
+
+	/*
+	 * Small page FLASH has a unique OOB layout, but large and huge
+	 * page FLASH use the standard layout. Small page FLASH uses a
+	 * custom BBT marker layout.
+	 */
+	if (mtd->writesize <= 512)
+		mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
+
+	/* These sizes remain the same regardless of page size */
+	chip->ecc.size = 256;
+	chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
+	chip->ecc.prepad = 0;
+	chip->ecc.postpad = 0;
+
+	/*
+	 * Use a custom BBT marker setup for small page FLASH that
+	 * won't interfere with the ECC layout. Large and huge page
+	 * FLASH use the standard layout.
+	 */
+	if ((chip->bbt_options & NAND_BBT_USE_FLASH) &&
+	    mtd->writesize <= 512) {
+		chip->bbt_td = &bbt_smallpage_main_descr;
+		chip->bbt_md = &bbt_smallpage_mirror_descr;
+	}
+
+	return 0;
+}
+
 /*
  * Probe for NAND controller
  */
@@ -884,41 +920,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	}
 
 	/* Find NAND device */
-	res = nand_scan_ident(mtd, 1, NULL);
-	if (res)
-		goto release_dma;
-
-	/* OOB and ECC CPU and DMA work areas */
-	host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
-
-	/*
-	 * Small page FLASH has a unique OOB layout, but large and huge
-	 * page FLASH use the standard layout. Small page FLASH uses a
-	 * custom BBT marker layout.
-	 */
-	if (mtd->writesize <= 512)
-		mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
-
-	/* These sizes remain the same regardless of page size */
-	chip->ecc.size = 256;
-	chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
-	chip->ecc.prepad = chip->ecc.postpad = 0;
-
-	/*
-	 * Use a custom BBT marker setup for small page FLASH that
-	 * won't interfere with the ECC layout. Large and huge page
-	 * FLASH use the standard layout.
-	 */
-	if ((chip->bbt_options & NAND_BBT_USE_FLASH) &&
-	    mtd->writesize <= 512) {
-		chip->bbt_td = &bbt_smallpage_main_descr;
-		chip->bbt_md = &bbt_smallpage_mirror_descr;
-	}
-
-	/*
-	 * Fills out all the uninitialized function pointers with the defaults
-	 */
-	res = nand_scan_tail(mtd);
+	chip->hwcontrol.attach_chip = lpc32xx_nand_attach_chip;
+	res = nand_scan(mtd, 1);
 	if (res)
 		goto release_dma;
 
-- 
2.14.1


WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Wenyou Yang <wenyou.yang@microchip.com>,
	Josh Wu <rainyfeeling@outlook.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Kamal Dasu <kdasu.kdev@gmail.com>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Han Xu <han.xu@nxp.com>, Harvey Hunt <harveyhuntnexus@gmail.com>,
	Vladimir Zapolskiy <vz@mleia.com>,
	Sylvain Lemieux <slemieux.tyco@gmail.com>,
	Xiaolei Li <xiaolei.li@mediatek.com>, Matthias Brugger <mat>
Cc: linux-mtd@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-mediatek@lists.infradead.org
Subject: [PATCH v2 13/32] mtd: rawnand: lpc32xx_slc: convert driver to nand_scan()
Date: Wed,  4 Jul 2018 00:00:10 +0200	[thread overview]
Message-ID: <20180703220029.19565-14-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180703220029.19565-1-miquel.raynal@bootlin.com>

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/lpc32xx_slc.c | 73 ++++++++++++++++++++------------------
 1 file changed, 38 insertions(+), 35 deletions(-)

diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index 42820aa1abab..c31efac1f9f5 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -779,6 +779,42 @@ static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
 	return ncfg;
 }
 
+static int lpc32xx_nand_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
+
+	/* OOB and ECC CPU and DMA work areas */
+	host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
+
+	/*
+	 * Small page FLASH has a unique OOB layout, but large and huge
+	 * page FLASH use the standard layout. Small page FLASH uses a
+	 * custom BBT marker layout.
+	 */
+	if (mtd->writesize <= 512)
+		mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
+
+	/* These sizes remain the same regardless of page size */
+	chip->ecc.size = 256;
+	chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
+	chip->ecc.prepad = 0;
+	chip->ecc.postpad = 0;
+
+	/*
+	 * Use a custom BBT marker setup for small page FLASH that
+	 * won't interfere with the ECC layout. Large and huge page
+	 * FLASH use the standard layout.
+	 */
+	if ((chip->bbt_options & NAND_BBT_USE_FLASH) &&
+	    mtd->writesize <= 512) {
+		chip->bbt_td = &bbt_smallpage_main_descr;
+		chip->bbt_md = &bbt_smallpage_mirror_descr;
+	}
+
+	return 0;
+}
+
 /*
  * Probe for NAND controller
  */
@@ -884,41 +920,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	}
 
 	/* Find NAND device */
-	res = nand_scan_ident(mtd, 1, NULL);
-	if (res)
-		goto release_dma;
-
-	/* OOB and ECC CPU and DMA work areas */
-	host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
-
-	/*
-	 * Small page FLASH has a unique OOB layout, but large and huge
-	 * page FLASH use the standard layout. Small page FLASH uses a
-	 * custom BBT marker layout.
-	 */
-	if (mtd->writesize <= 512)
-		mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
-
-	/* These sizes remain the same regardless of page size */
-	chip->ecc.size = 256;
-	chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
-	chip->ecc.prepad = chip->ecc.postpad = 0;
-
-	/*
-	 * Use a custom BBT marker setup for small page FLASH that
-	 * won't interfere with the ECC layout. Large and huge page
-	 * FLASH use the standard layout.
-	 */
-	if ((chip->bbt_options & NAND_BBT_USE_FLASH) &&
-	    mtd->writesize <= 512) {
-		chip->bbt_td = &bbt_smallpage_main_descr;
-		chip->bbt_md = &bbt_smallpage_mirror_descr;
-	}
-
-	/*
-	 * Fills out all the uninitialized function pointers with the defaults
-	 */
-	res = nand_scan_tail(mtd);
+	chip->hwcontrol.attach_chip = lpc32xx_nand_attach_chip;
+	res = nand_scan(mtd, 1);
 	if (res)
 		goto release_dma;
 
-- 
2.14.1

WARNING: multiple messages have this Message-ID (diff)
From: miquel.raynal@bootlin.com (Miquel Raynal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 13/32] mtd: rawnand: lpc32xx_slc: convert driver to nand_scan()
Date: Wed,  4 Jul 2018 00:00:10 +0200	[thread overview]
Message-ID: <20180703220029.19565-14-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180703220029.19565-1-miquel.raynal@bootlin.com>

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/lpc32xx_slc.c | 73 ++++++++++++++++++++------------------
 1 file changed, 38 insertions(+), 35 deletions(-)

diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index 42820aa1abab..c31efac1f9f5 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -779,6 +779,42 @@ static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
 	return ncfg;
 }
 
+static int lpc32xx_nand_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
+
+	/* OOB and ECC CPU and DMA work areas */
+	host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
+
+	/*
+	 * Small page FLASH has a unique OOB layout, but large and huge
+	 * page FLASH use the standard layout. Small page FLASH uses a
+	 * custom BBT marker layout.
+	 */
+	if (mtd->writesize <= 512)
+		mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
+
+	/* These sizes remain the same regardless of page size */
+	chip->ecc.size = 256;
+	chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
+	chip->ecc.prepad = 0;
+	chip->ecc.postpad = 0;
+
+	/*
+	 * Use a custom BBT marker setup for small page FLASH that
+	 * won't interfere with the ECC layout. Large and huge page
+	 * FLASH use the standard layout.
+	 */
+	if ((chip->bbt_options & NAND_BBT_USE_FLASH) &&
+	    mtd->writesize <= 512) {
+		chip->bbt_td = &bbt_smallpage_main_descr;
+		chip->bbt_md = &bbt_smallpage_mirror_descr;
+	}
+
+	return 0;
+}
+
 /*
  * Probe for NAND controller
  */
@@ -884,41 +920,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	}
 
 	/* Find NAND device */
-	res = nand_scan_ident(mtd, 1, NULL);
-	if (res)
-		goto release_dma;
-
-	/* OOB and ECC CPU and DMA work areas */
-	host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
-
-	/*
-	 * Small page FLASH has a unique OOB layout, but large and huge
-	 * page FLASH use the standard layout. Small page FLASH uses a
-	 * custom BBT marker layout.
-	 */
-	if (mtd->writesize <= 512)
-		mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
-
-	/* These sizes remain the same regardless of page size */
-	chip->ecc.size = 256;
-	chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
-	chip->ecc.prepad = chip->ecc.postpad = 0;
-
-	/*
-	 * Use a custom BBT marker setup for small page FLASH that
-	 * won't interfere with the ECC layout. Large and huge page
-	 * FLASH use the standard layout.
-	 */
-	if ((chip->bbt_options & NAND_BBT_USE_FLASH) &&
-	    mtd->writesize <= 512) {
-		chip->bbt_td = &bbt_smallpage_main_descr;
-		chip->bbt_md = &bbt_smallpage_mirror_descr;
-	}
-
-	/*
-	 * Fills out all the uninitialized function pointers with the defaults
-	 */
-	res = nand_scan_tail(mtd);
+	chip->hwcontrol.attach_chip = lpc32xx_nand_attach_chip;
+	res = nand_scan(mtd, 1);
 	if (res)
 		goto release_dma;
 
-- 
2.14.1

  parent reply	other threads:[~2018-07-03 22:05 UTC|newest]

Thread overview: 105+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-03 21:59 [PATCH v2 00/32] Allow dynamic allocations during NAND chip identification phase Miquel Raynal
2018-07-03 21:59 ` Miquel Raynal
2018-07-03 21:59 ` Miquel Raynal
2018-07-03 21:59 ` [PATCH v2 01/32] mtd: rawnand: add hooks that may be called during nand_scan() Miquel Raynal
2018-07-03 21:59   ` Miquel Raynal
2018-07-03 21:59   ` Miquel Raynal
2018-07-04  7:09   ` Boris Brezillon
2018-07-04  7:09     ` Boris Brezillon
2018-07-04  7:09     ` Boris Brezillon
2018-07-03 21:59 ` [PATCH v2 02/32] mtd: rawnand: brcmnand: convert driver to nand_scan() Miquel Raynal
2018-07-03 21:59   ` Miquel Raynal
2018-07-03 21:59   ` Miquel Raynal
2018-07-04  7:14   ` Boris Brezillon
2018-07-04  7:14     ` Boris Brezillon
2018-07-04  7:14     ` Boris Brezillon
2018-07-03 22:00 ` [PATCH v2 03/32] mtd: rawnand: cafe: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 04/32] mtd: rawnand: davinci: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 05/32] mtd: rawnand: denali: convert " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 06/32] mtd: rawnand: fsl_elbc: convert driver " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 07/32] mtd: rawnand: fsl_ifc: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 08/32] mtd: rawnand: fsmc: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 09/32] mtd: rawnand: gpmi: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 10/32] mtd: rawnand: hisi504: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 11/32] mtd: rawnand: jz4780: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 12/32] mtd: rawnand: lpc32xx_mlc: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` Miquel Raynal [this message]
2018-07-03 22:00   ` [PATCH v2 13/32] mtd: rawnand: lpc32xx_slc: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 14/32] mtd: rawnand: marvell: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 15/32] mtd: rawnand: mtk: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 16/32] mtd: rawnand: mxc: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 17/32] mtd: rawnand: nandsim: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 18/32] mtd: rawnand: omap2: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 19/32] mtd: rawnand: s3c2410: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 20/32] mtd: rawnand: sh_flctl: move all NAND chip related setup in one function Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 21/32] mtd: rawnand: sh_flctl: convert driver to nand_scan() Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 22/32] mtd: rawnand: sunxi: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 23/32] mtd: rawnand: tango: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 24/32] mtd: rawnand: txx9ndfmc: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 25/32] mtd: rawnand: vf610: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 26/32] mtd: rawnand: atmel: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 27/32] mtd: rawnand: sm_common: convert driver to nand_scan_with_ids() Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 28/32] mtd: rawnand: docg4: convert driver to nand_scan() Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 29/32] mtd: rawnand: qcom: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 30/32] mtd: rawnand: jz4740: " Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 31/32] mtd: rawnand: do not export nand_scan_[ident|tail]() anymore Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 32/32] mtd: rawnand: allocate dynamically ONFI parameters during detection Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal
2018-07-03 22:00   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180703220029.19565-14-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=han.xu@nxp.com \
    --cc=harveyhuntnexus@gmail.com \
    --cc=kdasu.kdev@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mans@mansr.com \
    --cc=marc.w.gonzalez@free.fr \
    --cc=marek.vasut@gmail.com \
    --cc=matthias.bgg@gmail.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=rainyfeeling@outlook.com \
    --cc=richard@nod.at \
    --cc=slemieux.tyco@gmail.com \
    --cc=stefan@agner.ch \
    --cc=vz@mleia.com \
    --cc=wens@csie.org \
    --cc=wenyou.yang@microchip.com \
    --cc=xiaolei.li@mediatek.com \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.