* [PATCH 0/5] Update omap4 l4 to probe with ti-sysc
@ 2018-07-09 6:36 Tony Lindgren
2018-07-09 6:36 ` [PATCH 1/5] dt-bindings: Update omap l4 binding for optional registers Tony Lindgren
` (4 more replies)
0 siblings, 5 replies; 7+ messages in thread
From: Tony Lindgren @ 2018-07-09 6:36 UTC (permalink / raw)
To: linux-omap
Cc: Benoît Cousson, devicetree, Mark Rutland, Peter Ujfalusi,
Rob Herring, Tero Kristo
Hi all,
Here's a series to update omap4 l4 interconnects to probe with
ti-sysc device tree data instead of the legacy hwmod platform
data.
This includes most l4 devices except for abe interconnect and
dsp_mmu. I'll provide patches later on for abe, and dsp_mmu
can be converted after we have a proper reset framework driver
for ti rstctrl registers.
We start the device tree data conversion with omap4 as it's
the first SoC using the clkctrl registers that all the later
omap variant SoCs use. And we now have omap4 runtime PM working
somewhat with core retention for non-USB cases so testing for
PM related regressions is possible.
Regards,
Tony
Tony Lindgren (5):
dt-bindings: Update omap l4 binding for optional registers
ARM: dts: omap4: Add l4 interconnect hierarchy and ti-sysc data
ARM: dts: omap4: Probe watchdog 3 with ti-sysc
ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc
ARM: dts: omap4: Add l4 ranges for 4460
.../devicetree/bindings/arm/omap/l4.txt | 15 +-
arch/arm/boot/dts/omap4-l4.dtsi | 2444 +++++++++++++++++
arch/arm/boot/dts/omap4-panda-es.dts | 2 +-
arch/arm/boot/dts/omap4.dtsi | 812 +-----
arch/arm/boot/dts/omap4460.dtsi | 36 +
5 files changed, 2526 insertions(+), 783 deletions(-)
create mode 100644 arch/arm/boot/dts/omap4-l4.dtsi
--
2.17.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/5] dt-bindings: Update omap l4 binding for optional registers
2018-07-09 6:36 [PATCH 0/5] Update omap4 l4 to probe with ti-sysc Tony Lindgren
@ 2018-07-09 6:36 ` Tony Lindgren
2018-07-20 14:11 ` Rob Herring
2018-07-09 6:36 ` [PATCH 2/5] ARM: dts: omap4: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren
` (3 subsequent siblings)
4 siblings, 1 reply; 7+ messages in thread
From: Tony Lindgren @ 2018-07-09 6:36 UTC (permalink / raw)
To: linux-omap
Cc: Benoît Cousson, devicetree, Mark Rutland, Rob Herring,
Tero Kristo, Peter Ujfalusi
The interconnects on omap variants have configuration registers.
There are registers for a link agent, one or more interconnect
agent, and an optional access protection.
Let's also update the example for omap4 l4 per instance as it
has multiple interconnect agent registers.
For more information, see chapter "Interconnect" in TI techical
reference manuals.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
Documentation/devicetree/bindings/arm/omap/l4.txt | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/omap/l4.txt b/Documentation/devicetree/bindings/arm/omap/l4.txt
--- a/Documentation/devicetree/bindings/arm/omap/l4.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l4.txt
@@ -7,6 +7,7 @@ Required properties:
Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus
+ Should be "ti,omap4-l4-per" for OMAP4 family l4 per bus
Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus
Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus
Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus
@@ -15,11 +16,21 @@ Required properties:
Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus
Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus
- ranges : contains the IO map range for the bus
+- reg : registers link agent and interconnect agent and access protection
+- reg-names : "la" for link agent, "ia0" to "ia3" for one to three
+ interconnect agent instances, "ap" for access if it exists
Examples:
-l4: l4@48000000 {
- compatible "ti,omap2-l4", "simple-bus";
+l4: interconnect@48000000 {
+ compatible "ti,omap4-l4-per", "simple-bus";
+ reg = <0x48000000 0x800>,
+ <0x48000800 0x800>,
+ <0x48001000 0x400>,
+ <0x48001400 0x400>,
+ <0x48001800 0x400>,
+ <0x48001c00 0x400>;
+ reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x48000000 0x100000>;
--
2.17.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/5] ARM: dts: omap4: Add l4 interconnect hierarchy and ti-sysc data
2018-07-09 6:36 [PATCH 0/5] Update omap4 l4 to probe with ti-sysc Tony Lindgren
2018-07-09 6:36 ` [PATCH 1/5] dt-bindings: Update omap l4 binding for optional registers Tony Lindgren
@ 2018-07-09 6:36 ` Tony Lindgren
2018-07-09 6:36 ` [PATCH 3/5] ARM: dts: omap4: Probe watchdog 3 with ti-sysc Tony Lindgren
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Tony Lindgren @ 2018-07-09 6:36 UTC (permalink / raw)
To: linux-omap
Cc: Benoît Cousson, devicetree, Mark Rutland, Peter Ujfalusi,
Rob Herring, Tero Kristo
Let's add proper interconnect hierarchy for l4 interconnect
instances with the related ti-sysc interconnect module data as
documented in Documentation/devicetree/bindings/bus/ti-sysc.txt.
Using ti-sysc driver binding allows us to start dropping
legacy platform data in arch/arm/mach-omap2/omap*hwmod*data.c
files later on in favor of ti-sysc dts data.
For setting up a proper hierarchy for the interconnect and
ti-sysc data, there are multiple reasons:
1. We can use dts ranges to protect registers from being
ioremapped from other devices and prevent hard to track
issues with failed flush of posted write between modules
2. Some of the ranges may not be accessible to operating systems
at all if configured so on high-security devices
3. The interconnect hierarchy provides proper clockdomain
hierarchy that can be used for genpd later on
4. We can avoid almost all deferred probe related issues simply
by probing the resource providing interconnect instance first
for l4 wkup instance
5. With deferred probe issues gone, we can probe everything
later at module_init time except for system timer and interrupt
controller and their clocks.
This data is generated based on platform data from a booted system
and the interconnect acces protection registers for ranges. To avoid
regressions, we initially validate the device tree provided data
against the existing platform data on boot.
Each interconnect instance is typically divided into segments
to avoid powering up the whole interconnect. And each segment
has one or more ranges TI specific interconnect target modules
connected to it. Some devices can also have a separate data
access port directly to the parent L3 interconnect for DMA that
can be set up as a separate range.
Note that we cannot yet include this file from omap4.dtsi
until child devices are moved to their proper locations in
the interconnect hierarchy in the following patch. Otherwise
we would have the each module probed twice.
Also note that this does not yet add l4 abe instance, that will
be added separately later on.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/omap4-l4.dtsi | 1817 +++++++++++++++++++++++++++++++
1 file changed, 1817 insertions(+)
create mode 100644 arch/arm/boot/dts/omap4-l4.dtsi
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
new file mode 100644
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -0,0 +1,1817 @@
+// SPDX-License-Identifier: GPL-2.0
+&l4_cfg { /* 0x4a000000 */
+ compatible = "ti,omap4-l4-cfg", "simple-bus";
+ reg = <0x4a000000 0x800>,
+ <0x4a000800 0x800>,
+ <0x4a001000 0x1000>;
+ reg-names = "ap", "la", "ia0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */
+ <0x00080000 0x4a080000 0x080000>, /* segment 1 */
+ <0x00100000 0x4a100000 0x080000>, /* segment 2 */
+ <0x00180000 0x4a180000 0x080000>, /* segment 3 */
+ <0x00200000 0x4a200000 0x080000>, /* segment 4 */
+ <0x00280000 0x4a280000 0x080000>, /* segment 5 */
+ <0x00300000 0x4a300000 0x080000>; /* segment 6 */
+
+ segment@0 { /* 0x4a000000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x001000>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00002000 0x00002000 0x001000>, /* ap 3 */
+ <0x00003000 0x00003000 0x001000>, /* ap 4 */
+ <0x00004000 0x00004000 0x001000>, /* ap 5 */
+ <0x00005000 0x00005000 0x001000>, /* ap 6 */
+ <0x00056000 0x00056000 0x001000>, /* ap 7 */
+ <0x00057000 0x00057000 0x001000>, /* ap 8 */
+ <0x0005c000 0x0005c000 0x001000>, /* ap 9 */
+ <0x00058000 0x00058000 0x004000>, /* ap 10 */
+ <0x00062000 0x00062000 0x001000>, /* ap 11 */
+ <0x00063000 0x00063000 0x001000>, /* ap 12 */
+ <0x00008000 0x00008000 0x002000>, /* ap 23 */
+ <0x0000a000 0x0000a000 0x001000>, /* ap 24 */
+ <0x00066000 0x00066000 0x001000>, /* ap 25 */
+ <0x00067000 0x00067000 0x001000>, /* ap 26 */
+ <0x0005e000 0x0005e000 0x002000>, /* ap 80 */
+ <0x00060000 0x00060000 0x001000>, /* ap 81 */
+ <0x00064000 0x00064000 0x001000>, /* ap 86 */
+ <0x00065000 0x00065000 0x001000>; /* ap 87 */
+
+ target-module@2000 { /* 0x4a002000, ap 3 06.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "ctrl_module_core";
+ reg = <0x2000 0x4>,
+ <0x2010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+ };
+
+ target-module@4000 { /* 0x4a004000, ap 5 02.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+ };
+
+ target-module@8000 { /* 0x4a008000, ap 23 32.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x2000>;
+ };
+
+ target-module@56000 { /* 0x4a056000, ap 7 0a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "dma_system";
+ reg = <0x56000 0x4>,
+ <0x5602c 0x4>,
+ <0x56028 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l3_dma_clkdm */
+ clocks = <&l3_dma_clkctrl OMAP4_DMA_SYSTEM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x56000 0x1000>;
+ };
+
+ target-module@58000 { /* 0x4a058000, ap 10 0e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "hsi";
+ reg = <0x58000 0x4>,
+ <0x58010 0x4>,
+ <0x58014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x58000 0x4000>;
+ };
+
+ target-module@5e000 { /* 0x4a05e000, ap 80 68.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5e000 0x2000>;
+ };
+
+ target-module@62000 { /* 0x4a062000, ap 11 16.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "usb_tll_hs";
+ reg = <0x62000 0x4>,
+ <0x62010 0x4>,
+ <0x62014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_USB_TLL_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x62000 0x1000>;
+ };
+
+ target-module@64000 { /* 0x4a064000, ap 86 1e.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "usb_host_hs";
+ reg = <0x64000 0x4>,
+ <0x64010 0x4>,
+ <0x64014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_USB_HOST_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x64000 0x1000>;
+ };
+
+ target-module@66000 { /* 0x4a066000, ap 25 26.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "mmu_dsp";
+ reg = <0x66000 0x4>,
+ <0x66010 0x4>,
+ <0x66014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */
+ clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x66000 0x1000>;
+ };
+ };
+
+ segment@80000 { /* 0x4a080000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */
+ <0x0005a000 0x000da000 0x001000>, /* ap 14 */
+ <0x0005b000 0x000db000 0x001000>, /* ap 15 */
+ <0x0005c000 0x000dc000 0x001000>, /* ap 16 */
+ <0x0005d000 0x000dd000 0x001000>, /* ap 17 */
+ <0x0005e000 0x000de000 0x001000>, /* ap 18 */
+ <0x00060000 0x000e0000 0x001000>, /* ap 19 */
+ <0x00061000 0x000e1000 0x001000>, /* ap 20 */
+ <0x00074000 0x000f4000 0x001000>, /* ap 27 */
+ <0x00075000 0x000f5000 0x001000>, /* ap 28 */
+ <0x00076000 0x000f6000 0x001000>, /* ap 29 */
+ <0x00077000 0x000f7000 0x001000>, /* ap 30 */
+ <0x00036000 0x000b6000 0x001000>, /* ap 69 */
+ <0x00037000 0x000b7000 0x001000>, /* ap 70 */
+ <0x0004d000 0x000cd000 0x001000>, /* ap 78 */
+ <0x0004e000 0x000ce000 0x001000>, /* ap 79 */
+ <0x00029000 0x000a9000 0x001000>, /* ap 82 */
+ <0x0002a000 0x000aa000 0x001000>, /* ap 83 */
+ <0x0002b000 0x000ab000 0x001000>, /* ap 84 */
+ <0x0002c000 0x000ac000 0x001000>, /* ap 85 */
+ <0x0002d000 0x000ad000 0x001000>, /* ap 88 */
+ <0x0002e000 0x000ae000 0x001000>; /* ap 89 */
+
+ target-module@29000 { /* 0x4a0a9000, ap 82 04.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x29000 0x1000>;
+ };
+
+ target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "usb_otg_hs";
+ reg = <0x2b400 0x4>,
+ <0x2b404 0x4>,
+ <0x2b408 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2b000 0x1000>;
+ };
+
+ target-module@2d000 { /* 0x4a0ad000, ap 88 0c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "ocp2scp_usb_phy";
+ reg = <0x2d000 0x4>,
+ <0x2d010 0x4>,
+ <0x2d014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_OCP2SCP_USB_PHY_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2d000 0x1000>;
+ };
+
+ target-module@36000 { /* 0x4a0b6000, ap 69 60.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x36000 0x1000>;
+ };
+
+ target-module@4d000 { /* 0x4a0cd000, ap 78 58.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4d000 0x1000>;
+ };
+
+ target-module@59000 { /* 0x4a0d9000, ap 13 1a.0 */
+ compatible = "ti,sysc-omap4-sr", "ti,sysc";
+ ti,hwmods = "smartreflex_mpu";
+ reg = <0x59038 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+ clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x59000 0x1000>;
+ };
+
+ target-module@5b000 { /* 0x4a0db000, ap 15 08.0 */
+ compatible = "ti,sysc-omap4-sr", "ti,sysc";
+ ti,hwmods = "smartreflex_iva";
+ reg = <0x5b038 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+ clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5b000 0x1000>;
+ };
+
+ target-module@5d000 { /* 0x4a0dd000, ap 17 22.0 */
+ compatible = "ti,sysc-omap4-sr", "ti,sysc";
+ ti,hwmods = "smartreflex_core";
+ reg = <0x5d038 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+ clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5d000 0x1000>;
+ };
+
+ target-module@60000 { /* 0x4a0e0000, ap 19 1c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x60000 0x1000>;
+ };
+
+ target-module@74000 { /* 0x4a0f4000, ap 27 24.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mailbox";
+ reg = <0x74000 0x4>,
+ <0x74010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+ clocks = <&l4_cfg_clkctrl OMAP4_MAILBOX_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x74000 0x1000>;
+ };
+
+ target-module@76000 { /* 0x4a0f6000, ap 29 3a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "spinlock";
+ reg = <0x76000 0x4>,
+ <0x76010 0x4>,
+ <0x76014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+ clocks = <&l4_cfg_clkctrl OMAP4_SPINLOCK_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x76000 0x1000>;
+ };
+ };
+
+ segment@100000 { /* 0x4a100000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00100000 0x001000>, /* ap 21 */
+ <0x00001000 0x00101000 0x001000>, /* ap 22 */
+ <0x00002000 0x00102000 0x001000>, /* ap 61 */
+ <0x00003000 0x00103000 0x001000>, /* ap 62 */
+ <0x00008000 0x00108000 0x001000>, /* ap 63 */
+ <0x00009000 0x00109000 0x001000>, /* ap 64 */
+ <0x0000a000 0x0010a000 0x001000>, /* ap 65 */
+ <0x0000b000 0x0010b000 0x001000>; /* ap 66 */
+
+ target-module@0 { /* 0x4a100000, ap 21 2a.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "ctrl_module_pad_core";
+ reg = <0x0 0x4>,
+ <0x10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+ };
+
+ target-module@2000 { /* 0x4a102000, ap 61 3c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+ };
+
+ target-module@8000 { /* 0x4a108000, ap 63 62.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+ };
+
+ target-module@a000 { /* 0x4a10a000, ap 65 50.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "fdif";
+ reg = <0xa000 0x4>,
+ <0xa010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-delay-us = <2>;
+ /* Domains (V, P, C): core, cam_pwrdm, iss_clkdm */
+ clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+ };
+ };
+
+ segment@180000 { /* 0x4a180000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ segment@200000 { /* 0x4a200000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 31 */
+ <0x0001f000 0x0021f000 0x001000>, /* ap 32 */
+ <0x0000a000 0x0020a000 0x001000>, /* ap 33 */
+ <0x0000b000 0x0020b000 0x001000>, /* ap 34 */
+ <0x00004000 0x00204000 0x001000>, /* ap 35 */
+ <0x00005000 0x00205000 0x001000>, /* ap 36 */
+ <0x00006000 0x00206000 0x001000>, /* ap 37 */
+ <0x00007000 0x00207000 0x001000>, /* ap 38 */
+ <0x00012000 0x00212000 0x001000>, /* ap 39 */
+ <0x00013000 0x00213000 0x001000>, /* ap 40 */
+ <0x0000c000 0x0020c000 0x001000>, /* ap 41 */
+ <0x0000d000 0x0020d000 0x001000>, /* ap 42 */
+ <0x00010000 0x00210000 0x001000>, /* ap 43 */
+ <0x00011000 0x00211000 0x001000>, /* ap 44 */
+ <0x00016000 0x00216000 0x001000>, /* ap 45 */
+ <0x00017000 0x00217000 0x001000>, /* ap 46 */
+ <0x00014000 0x00214000 0x001000>, /* ap 47 */
+ <0x00015000 0x00215000 0x001000>, /* ap 48 */
+ <0x00018000 0x00218000 0x001000>, /* ap 49 */
+ <0x00019000 0x00219000 0x001000>, /* ap 50 */
+ <0x00020000 0x00220000 0x001000>, /* ap 51 */
+ <0x00021000 0x00221000 0x001000>, /* ap 52 */
+ <0x00026000 0x00226000 0x001000>, /* ap 53 */
+ <0x00027000 0x00227000 0x001000>, /* ap 54 */
+ <0x00028000 0x00228000 0x001000>, /* ap 55 */
+ <0x00029000 0x00229000 0x001000>, /* ap 56 */
+ <0x0002a000 0x0022a000 0x001000>, /* ap 57 */
+ <0x0002b000 0x0022b000 0x001000>, /* ap 58 */
+ <0x0001c000 0x0021c000 0x001000>, /* ap 59 */
+ <0x0001d000 0x0021d000 0x001000>; /* ap 60 */
+
+ target-module@4000 { /* 0x4a204000, ap 35 42.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+ };
+
+ target-module@6000 { /* 0x4a206000, ap 37 4a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x1000>;
+ };
+
+ target-module@a000 { /* 0x4a20a000, ap 33 2c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+ };
+
+ target-module@c000 { /* 0x4a20c000, ap 41 20.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+ };
+
+ target-module@10000 { /* 0x4a210000, ap 43 52.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000 0x1000>;
+ };
+
+ target-module@12000 { /* 0x4a212000, ap 39 18.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x12000 0x1000>;
+ };
+
+ target-module@14000 { /* 0x4a214000, ap 47 30.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x14000 0x1000>;
+ };
+
+ target-module@16000 { /* 0x4a216000, ap 45 28.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x16000 0x1000>;
+ };
+
+ target-module@18000 { /* 0x4a218000, ap 49 38.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x18000 0x1000>;
+ };
+
+ target-module@1c000 { /* 0x4a21c000, ap 59 5a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1c000 0x1000>;
+ };
+
+ target-module@1e000 { /* 0x4a21e000, ap 31 10.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e000 0x1000>;
+ };
+
+ target-module@20000 { /* 0x4a220000, ap 51 40.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+ };
+
+ target-module@26000 { /* 0x4a226000, ap 53 34.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x1000>;
+ };
+
+ target-module@28000 { /* 0x4a228000, ap 55 2e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x28000 0x1000>;
+ };
+
+ target-module@2a000 { /* 0x4a22a000, ap 57 48.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2a000 0x1000>;
+ };
+ };
+
+ segment@280000 { /* 0x4a280000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ segment@300000 { /* 0x4a300000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */
+ <0x00040000 0x00340000 0x001000>, /* ap 68 */
+ <0x00020000 0x00320000 0x004000>, /* ap 71 */
+ <0x00024000 0x00324000 0x002000>, /* ap 72 */
+ <0x00026000 0x00326000 0x001000>, /* ap 73 */
+ <0x00027000 0x00327000 0x001000>, /* ap 74 */
+ <0x00028000 0x00328000 0x001000>, /* ap 75 */
+ <0x00029000 0x00329000 0x001000>, /* ap 76 */
+ <0x00030000 0x00330000 0x010000>, /* ap 77 */
+ <0x0002a000 0x0032a000 0x002000>, /* ap 90 */
+ <0x0002c000 0x0032c000 0x004000>; /* ap 91 */
+
+ target-module@0 { /* 0x4a300000, ap 67 14.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x00020000>,
+ <0x00020000 0x00020000 0x00004000>,
+ <0x00024000 0x00024000 0x00002000>,
+ <0x00026000 0x00026000 0x00001000>,
+ <0x00027000 0x00027000 0x00001000>,
+ <0x00028000 0x00028000 0x00001000>,
+ <0x00029000 0x00029000 0x00001000>,
+ <0x0002a000 0x0002a000 0x00002000>,
+ <0x0002c000 0x0002c000 0x00004000>,
+ <0x00030000 0x00030000 0x00010000>;
+ };
+ };
+};
+
+&l4_wkup { /* 0x4a300000 */
+ compatible = "ti,omap4-l4-wkup", "simple-bus";
+ reg = <0x4a300000 0x800>,
+ <0x4a300800 0x800>,
+ <0x4a301000 0x1000>;
+ reg-names = "ap", "la", "ia0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4a300000 0x010000>, /* segment 0 */
+ <0x00010000 0x4a310000 0x010000>, /* segment 1 */
+ <0x00020000 0x4a320000 0x010000>; /* segment 2 */
+
+ segment@0 { /* 0x4a300000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x001000>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00006000 0x00006000 0x002000>, /* ap 3 */
+ <0x00008000 0x00008000 0x001000>, /* ap 4 */
+ <0x0000a000 0x0000a000 0x001000>, /* ap 15 */
+ <0x0000b000 0x0000b000 0x001000>, /* ap 16 */
+ <0x00004000 0x00004000 0x001000>, /* ap 17 */
+ <0x00005000 0x00005000 0x001000>, /* ap 18 */
+ <0x0000c000 0x0000c000 0x001000>, /* ap 19 */
+ <0x0000d000 0x0000d000 0x001000>; /* ap 20 */
+
+ target-module@4000 { /* 0x4a304000, ap 17 24.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "counter_32k";
+ reg = <0x4000 0x4>,
+ <0x4004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl OMAP4_COUNTER_32K_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+ };
+
+ target-module@6000 { /* 0x4a306000, ap 3 08.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x2000>;
+ };
+
+ target-module@a000 { /* 0x4a30a000, ap 15 34.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa000 0x1000>;
+ };
+
+ target-module@c000 { /* 0x4a30c000, ap 19 2c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "ctrl_module_wkup";
+ reg = <0xc000 0x4>,
+ <0xc010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+ };
+ };
+
+ segment@10000 { /* 0x4a310000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */
+ <0x00001000 0x00011000 0x001000>, /* ap 6 */
+ <0x00004000 0x00014000 0x001000>, /* ap 7 */
+ <0x00005000 0x00015000 0x001000>, /* ap 8 */
+ <0x00008000 0x00018000 0x001000>, /* ap 9 */
+ <0x00009000 0x00019000 0x001000>, /* ap 10 */
+ <0x0000c000 0x0001c000 0x001000>, /* ap 11 */
+ <0x0000d000 0x0001d000 0x001000>, /* ap 12 */
+ <0x0000e000 0x0001e000 0x001000>, /* ap 21 */
+ <0x0000f000 0x0001f000 0x001000>; /* ap 22 */
+
+ target-module@0 { /* 0x4a310000, ap 5 14.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "gpio1";
+ reg = <0x0 0x4>,
+ <0x10 0x4>,
+ <0x114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 0>,
+ <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+ };
+
+ target-module@4000 { /* 0x4a314000, ap 7 18.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "wd_timer2";
+ reg = <0x4000 0x4>,
+ <0x4010 0x4>,
+ <0x4014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl OMAP4_WD_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+ };
+
+ target-module@8000 { /* 0x4a318000, ap 9 1c.0 */
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ ti,hwmods = "timer1";
+ reg = <0x8000 0x4>,
+ <0x8010 0x4>,
+ <0x8014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8000 0x1000>;
+ };
+
+ target-module@c000 { /* 0x4a31c000, ap 11 20.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "kbd";
+ reg = <0xc000 0x4>,
+ <0xc010 0x4>,
+ <0xc014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ clocks = <&l4_wkup_clkctrl OMAP4_KBD_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc000 0x1000>;
+ };
+
+ target-module@e000 { /* 0x4a31e000, ap 21 30.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "ctrl_module_pad_wkup";
+ reg = <0xe000 0x4>,
+ <0xe010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe000 0x1000>;
+ };
+ };
+
+ segment@20000 { /* 0x4a320000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */
+ <0x0000a000 0x0002a000 0x001000>, /* ap 14 */
+ <0x00000000 0x00020000 0x001000>, /* ap 23 */
+ <0x00001000 0x00021000 0x001000>, /* ap 24 */
+ <0x00002000 0x00022000 0x001000>, /* ap 25 */
+ <0x00003000 0x00023000 0x001000>, /* ap 26 */
+ <0x00004000 0x00024000 0x001000>, /* ap 27 */
+ <0x00005000 0x00025000 0x001000>, /* ap 28 */
+ <0x00007000 0x00027000 0x000400>, /* ap 29 */
+ <0x00008000 0x00028000 0x000800>, /* ap 30 */
+ <0x00009000 0x00029000 0x000400>; /* ap 31 */
+
+ target-module@0 { /* 0x4a320000, ap 23 04.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+ };
+
+ target-module@2000 { /* 0x4a322000, ap 25 0c.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2000 0x1000>;
+ };
+
+ target-module@4000 { /* 0x4a324000, ap 27 10.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4000 0x1000>;
+ };
+
+ target-module@6000 { /* 0x4a326000, ap 13 28.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00006000 0x00001000>,
+ <0x00001000 0x00007000 0x00000400>,
+ <0x00002000 0x00008000 0x00000800>,
+ <0x00003000 0x00009000 0x00000400>;
+ };
+ };
+};
+
+&l4_per { /* 0x48000000 */
+ compatible = "ti,omap4-l4-per", "simple-bus";
+ reg = <0x48000000 0x800>,
+ <0x48000800 0x800>,
+ <0x48001000 0x400>,
+ <0x48001400 0x400>,
+ <0x48001800 0x400>,
+ <0x48001c00 0x400>;
+ reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */
+ <0x00200000 0x48200000 0x200000>; /* segment 1 */
+
+ segment@0 { /* 0x48000000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
+ <0x00001000 0x00001000 0x000400>, /* ap 1 */
+ <0x00000800 0x00000800 0x000800>, /* ap 2 */
+ <0x00020000 0x00020000 0x001000>, /* ap 3 */
+ <0x00021000 0x00021000 0x001000>, /* ap 4 */
+ <0x00032000 0x00032000 0x001000>, /* ap 5 */
+ <0x00033000 0x00033000 0x001000>, /* ap 6 */
+ <0x00034000 0x00034000 0x001000>, /* ap 7 */
+ <0x00035000 0x00035000 0x001000>, /* ap 8 */
+ <0x00036000 0x00036000 0x001000>, /* ap 9 */
+ <0x00037000 0x00037000 0x001000>, /* ap 10 */
+ <0x0003e000 0x0003e000 0x001000>, /* ap 11 */
+ <0x0003f000 0x0003f000 0x001000>, /* ap 12 */
+ <0x00040000 0x00040000 0x010000>, /* ap 13 */
+ <0x00050000 0x00050000 0x001000>, /* ap 14 */
+ <0x00055000 0x00055000 0x001000>, /* ap 15 */
+ <0x00056000 0x00056000 0x001000>, /* ap 16 */
+ <0x00057000 0x00057000 0x001000>, /* ap 17 */
+ <0x00058000 0x00058000 0x001000>, /* ap 18 */
+ <0x00059000 0x00059000 0x001000>, /* ap 19 */
+ <0x0005a000 0x0005a000 0x001000>, /* ap 20 */
+ <0x0005b000 0x0005b000 0x001000>, /* ap 21 */
+ <0x0005c000 0x0005c000 0x001000>, /* ap 22 */
+ <0x0005d000 0x0005d000 0x001000>, /* ap 23 */
+ <0x0005e000 0x0005e000 0x001000>, /* ap 24 */
+ <0x00060000 0x00060000 0x001000>, /* ap 25 */
+ <0x0006a000 0x0006a000 0x001000>, /* ap 26 */
+ <0x0006b000 0x0006b000 0x001000>, /* ap 27 */
+ <0x0006c000 0x0006c000 0x001000>, /* ap 28 */
+ <0x0006d000 0x0006d000 0x001000>, /* ap 29 */
+ <0x0006e000 0x0006e000 0x001000>, /* ap 30 */
+ <0x0006f000 0x0006f000 0x001000>, /* ap 31 */
+ <0x00070000 0x00070000 0x001000>, /* ap 32 */
+ <0x00071000 0x00071000 0x001000>, /* ap 33 */
+ <0x00072000 0x00072000 0x001000>, /* ap 34 */
+ <0x00073000 0x00073000 0x001000>, /* ap 35 */
+ <0x00061000 0x00061000 0x001000>, /* ap 36 */
+ <0x00096000 0x00096000 0x001000>, /* ap 37 */
+ <0x00097000 0x00097000 0x001000>, /* ap 38 */
+ <0x00076000 0x00076000 0x001000>, /* ap 39 */
+ <0x00077000 0x00077000 0x001000>, /* ap 40 */
+ <0x00078000 0x00078000 0x001000>, /* ap 41 */
+ <0x00079000 0x00079000 0x001000>, /* ap 42 */
+ <0x00086000 0x00086000 0x001000>, /* ap 43 */
+ <0x00087000 0x00087000 0x001000>, /* ap 44 */
+ <0x00088000 0x00088000 0x001000>, /* ap 45 */
+ <0x00089000 0x00089000 0x001000>, /* ap 46 */
+ <0x000b0000 0x000b0000 0x001000>, /* ap 47 */
+ <0x000b1000 0x000b1000 0x001000>, /* ap 48 */
+ <0x00098000 0x00098000 0x001000>, /* ap 49 */
+ <0x00099000 0x00099000 0x001000>, /* ap 50 */
+ <0x0009a000 0x0009a000 0x001000>, /* ap 51 */
+ <0x0009b000 0x0009b000 0x001000>, /* ap 52 */
+ <0x0009c000 0x0009c000 0x001000>, /* ap 53 */
+ <0x0009d000 0x0009d000 0x001000>, /* ap 54 */
+ <0x0009e000 0x0009e000 0x001000>, /* ap 55 */
+ <0x0009f000 0x0009f000 0x001000>, /* ap 56 */
+ <0x00090000 0x00090000 0x002000>, /* ap 57 */
+ <0x00092000 0x00092000 0x001000>, /* ap 58 */
+ <0x000a4000 0x000a4000 0x001000>, /* ap 59 */
+ <0x000a6000 0x000a6000 0x001000>, /* ap 60 */
+ <0x000a8000 0x000a8000 0x004000>, /* ap 61 */
+ <0x000ac000 0x000ac000 0x001000>, /* ap 62 */
+ <0x000ad000 0x000ad000 0x001000>, /* ap 63 */
+ <0x000ae000 0x000ae000 0x001000>, /* ap 64 */
+ <0x000b2000 0x000b2000 0x001000>, /* ap 65 */
+ <0x000b3000 0x000b3000 0x001000>, /* ap 66 */
+ <0x000b4000 0x000b4000 0x001000>, /* ap 67 */
+ <0x000b5000 0x000b5000 0x001000>, /* ap 68 */
+ <0x000b8000 0x000b8000 0x001000>, /* ap 69 */
+ <0x000b9000 0x000b9000 0x001000>, /* ap 70 */
+ <0x000ba000 0x000ba000 0x001000>, /* ap 71 */
+ <0x000bb000 0x000bb000 0x001000>, /* ap 72 */
+ <0x000d1000 0x000d1000 0x001000>, /* ap 73 */
+ <0x000d2000 0x000d2000 0x001000>, /* ap 74 */
+ <0x000d5000 0x000d5000 0x001000>, /* ap 75 */
+ <0x000d6000 0x000d6000 0x001000>, /* ap 76 */
+ <0x000a2000 0x000a2000 0x001000>, /* ap 79 */
+ <0x000a3000 0x000a3000 0x001000>, /* ap 80 */
+ <0x00001400 0x00001400 0x000400>, /* ap 81 */
+ <0x00001800 0x00001800 0x000400>, /* ap 82 */
+ <0x00001c00 0x00001c00 0x000400>, /* ap 83 */
+ <0x000a5000 0x000a5000 0x001000>; /* ap 84 */
+
+ target-module@20000 { /* 0x48020000, ap 3 06.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "uart3";
+ reg = <0x20050 0x4>,
+ <0x20054 0x4>,
+ <0x20058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_UART3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x20000 0x1000>;
+ };
+
+ target-module@32000 { /* 0x48032000, ap 5 02.0 */
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ ti,hwmods = "timer2";
+ reg = <0x32000 0x4>,
+ <0x32010 0x4>,
+ <0x32014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x32000 0x1000>;
+ };
+
+ target-module@34000 { /* 0x48034000, ap 7 04.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer3";
+ reg = <0x34000 0x4>,
+ <0x34010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x34000 0x1000>;
+ };
+
+ target-module@36000 { /* 0x48036000, ap 9 0e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer4";
+ reg = <0x36000 0x4>,
+ <0x36010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x36000 0x1000>;
+ };
+
+ target-module@3e000 { /* 0x4803e000, ap 11 08.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer9";
+ reg = <0x3e000 0x4>,
+ <0x3e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x3e000 0x1000>;
+ };
+
+ target-module@40000 { /* 0x48040000, ap 13 0a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x40000 0x10000>;
+ };
+
+ target-module@55000 { /* 0x48055000, ap 15 0c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "gpio2";
+ reg = <0x55000 0x4>,
+ <0x55010 0x4>,
+ <0x55114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 0>,
+ <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x55000 0x1000>;
+ };
+
+ target-module@57000 { /* 0x48057000, ap 17 16.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "gpio3";
+ reg = <0x57000 0x4>,
+ <0x57010 0x4>,
+ <0x57114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 0>,
+ <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x57000 0x1000>;
+ };
+
+ target-module@59000 { /* 0x48059000, ap 19 10.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "gpio4";
+ reg = <0x59000 0x4>,
+ <0x59010 0x4>,
+ <0x59114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 0>,
+ <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x59000 0x1000>;
+ };
+
+ target-module@5b000 { /* 0x4805b000, ap 21 12.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "gpio5";
+ reg = <0x5b000 0x4>,
+ <0x5b010 0x4>,
+ <0x5b114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 0>,
+ <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5b000 0x1000>;
+ };
+
+ target-module@5d000 { /* 0x4805d000, ap 23 14.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "gpio6";
+ reg = <0x5d000 0x4>,
+ <0x5d010 0x4>,
+ <0x5d114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 0>,
+ <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 8>;
+ clock-names = "fck", "dbclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5d000 0x1000>;
+ };
+
+ target-module@60000 { /* 0x48060000, ap 25 1e.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "i2c3";
+ reg = <0x60000 0x8>,
+ <0x60010 0x8>,
+ <0x60090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_I2C3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x60000 0x1000>;
+ };
+
+ target-module@6a000 { /* 0x4806a000, ap 26 18.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "uart1";
+ reg = <0x6a050 0x4>,
+ <0x6a054 0x4>,
+ <0x6a058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_UART1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6a000 0x1000>;
+ };
+
+ target-module@6c000 { /* 0x4806c000, ap 28 20.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "uart2";
+ reg = <0x6c050 0x4>,
+ <0x6c054 0x4>,
+ <0x6c058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_UART2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6c000 0x1000>;
+ };
+
+ target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "uart4";
+ reg = <0x6e050 0x4>,
+ <0x6e054 0x4>,
+ <0x6e058 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_UART4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6e000 0x1000>;
+ };
+
+ target-module@70000 { /* 0x48070000, ap 32 28.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "i2c1";
+ reg = <0x70000 0x8>,
+ <0x70010 0x8>,
+ <0x70090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_I2C1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x70000 0x1000>;
+ };
+
+ target-module@72000 { /* 0x48072000, ap 34 30.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "i2c2";
+ reg = <0x72000 0x8>,
+ <0x72010 0x8>,
+ <0x72090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_I2C2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x72000 0x1000>;
+ };
+
+ target-module@76000 { /* 0x48076000, ap 39 38.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "slimbus2";
+ reg = <0x76000 0x4>,
+ <0x76010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x76000 0x1000>;
+ };
+
+ target-module@78000 { /* 0x48078000, ap 41 1a.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "elm";
+ reg = <0x78000 0x4>,
+ <0x78010 0x4>,
+ <0x78014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_ELM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x78000 0x1000>;
+ };
+
+ target-module@86000 { /* 0x48086000, ap 43 24.0 */
+ compatible = "ti,sysc-omap2-timer", "ti,sysc";
+ ti,hwmods = "timer10";
+ reg = <0x86000 0x4>,
+ <0x86010 0x4>,
+ <0x86014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x86000 0x1000>;
+ };
+
+ target-module@88000 { /* 0x48088000, ap 45 2e.0 */
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ ti,hwmods = "timer11";
+ reg = <0x88000 0x4>,
+ <0x88010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x88000 0x1000>;
+ };
+
+ target-module@90000 { /* 0x48090000, ap 57 2a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x90000 0x2000>;
+ };
+
+ target-module@96000 { /* 0x48096000, ap 37 26.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "mcbsp4";
+ reg = <0x9608c 0x4>;
+ reg-names = "sysc";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x96000 0x1000>;
+ };
+
+ target-module@98000 { /* 0x48098000, ap 49 22.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mcspi1";
+ reg = <0x98000 0x4>,
+ <0x98010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MCSPI1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x98000 0x1000>;
+ };
+
+ target-module@9a000 { /* 0x4809a000, ap 51 2c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mcspi2";
+ reg = <0x9a000 0x4>,
+ <0x9a010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MCSPI2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9a000 0x1000>;
+ };
+
+ target-module@9c000 { /* 0x4809c000, ap 53 36.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mmc1";
+ reg = <0x9c000 0x4>,
+ <0x9c010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_MMC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9c000 0x1000>;
+ };
+
+ target-module@9e000 { /* 0x4809e000, ap 55 48.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x9e000 0x1000>;
+ };
+
+ target-module@a2000 { /* 0x480a2000, ap 79 3a.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa2000 0x1000>;
+ };
+
+ target-module@a4000 { /* 0x480a4000, ap 59 34.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x000a4000 0x00001000>,
+ <0x00001000 0x000a5000 0x00001000>;
+ };
+
+ target-module@a8000 { /* 0x480a8000, ap 61 3e.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xa8000 0x4000>;
+ };
+
+ target-module@ad000 { /* 0x480ad000, ap 63 50.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mmc3";
+ reg = <0xad000 0x4>,
+ <0xad010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xad000 0x1000>;
+ };
+
+ target-module@b0000 { /* 0x480b0000, ap 47 40.0 */
+ compatible = "ti,sysc";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb0000 0x1000>;
+ };
+
+ target-module@b2000 { /* 0x480b2000, ap 65 3c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "hdq1w";
+ reg = <0xb2000 0x4>,
+ <0xb2014 0x4>,
+ <0xb2018 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ ti,no-reset-on-init;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_HDQ1W_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb2000 0x1000>;
+ };
+
+ target-module@b4000 { /* 0x480b4000, ap 67 46.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mmc2";
+ reg = <0xb4000 0x4>,
+ <0xb4010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+ clocks = <&l3_init_clkctrl OMAP4_MMC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb4000 0x1000>;
+ };
+
+ target-module@b8000 { /* 0x480b8000, ap 69 58.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mcspi3";
+ reg = <0xb8000 0x4>,
+ <0xb8010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MCSPI3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb8000 0x1000>;
+ };
+
+ target-module@ba000 { /* 0x480ba000, ap 71 32.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mcspi4";
+ reg = <0xba000 0x4>,
+ <0xba010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MCSPI4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xba000 0x1000>;
+ };
+
+ target-module@d1000 { /* 0x480d1000, ap 73 44.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mmc4";
+ reg = <0xd1000 0x4>,
+ <0xd1010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MMC4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd1000 0x1000>;
+ };
+
+ target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ ti,hwmods = "mmc5";
+ reg = <0xd5000 0x4>,
+ <0xd5010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+ SYSC_OMAP4_SOFTRESET)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_MMC5_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd5000 0x1000>;
+ };
+ };
+
+ segment@200000 { /* 0x48200000 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00150000 0x00350000 0x001000>, /* ap 77 */
+ <0x00151000 0x00351000 0x001000>; /* ap 78 */
+
+ target-module@150000 { /* 0x48350000, ap 77 4c.0 */
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "i2c4";
+ reg = <0x150000 0x8>,
+ <0x150010 0x8>,
+ <0x150090 0x8>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+ clocks = <&l4_per_clkctrl OMAP4_I2C4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x150000 0x1000>;
+ };
+ };
+};
+
--
2.17.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 3/5] ARM: dts: omap4: Probe watchdog 3 with ti-sysc
2018-07-09 6:36 [PATCH 0/5] Update omap4 l4 to probe with ti-sysc Tony Lindgren
2018-07-09 6:36 ` [PATCH 1/5] dt-bindings: Update omap l4 binding for optional registers Tony Lindgren
2018-07-09 6:36 ` [PATCH 2/5] ARM: dts: omap4: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren
@ 2018-07-09 6:36 ` Tony Lindgren
2018-07-09 6:36 ` [PATCH 4/5] ARM: dts: omap4: Move l4 child devices to probe them " Tony Lindgren
2018-07-09 6:36 ` [PATCH 5/5] ARM: dts: omap4: Add l4 ranges for 4460 Tony Lindgren
4 siblings, 0 replies; 7+ messages in thread
From: Tony Lindgren @ 2018-07-09 6:36 UTC (permalink / raw)
To: linux-omap
Cc: Benoît Cousson, devicetree, Peter Ujfalusi, Mark Rutland,
Rob Herring, Tero Kristo
Before updating wdt2 to probe with ti-sysc we want to have wdt3
probed with ti-sysc to avoid having them unnecessarily swap order.
With ti-sysc, we probe child devices at module_init time while
and until l4 abe interconnect is converted to use ti-sysc, wdt3
will probe earlier with legacy platform data.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/omap4.dtsi | 31 ++++++++++++++++++++++++++-----
1 file changed, 26 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -787,12 +787,33 @@
ti,hwmods = "wd_timer2";
};
- wdt3: wdt@40130000 {
- compatible = "ti,omap4-wdt", "ti,omap3-wdt";
- reg = <0x40130000 0x80>, /* MPU private access */
- <0x49030000 0x80>; /* L3 Interconnect */
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ target-module@40130000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "wd_timer3";
+ reg = <0x40130000 0x4>,
+ <0x40130010 0x4>,
+ <0x40130014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): abe, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40130000 0x1000>, /* MPU private access */
+ <0x49030000 0x49030000 0x0080>; /* L3 Interconnect */
+
+ wdt3: wdt@0 {
+ compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
mcpdm: mcpdm@40132000 {
--
2.17.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 4/5] ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc
2018-07-09 6:36 [PATCH 0/5] Update omap4 l4 to probe with ti-sysc Tony Lindgren
` (2 preceding siblings ...)
2018-07-09 6:36 ` [PATCH 3/5] ARM: dts: omap4: Probe watchdog 3 with ti-sysc Tony Lindgren
@ 2018-07-09 6:36 ` Tony Lindgren
2018-07-09 6:36 ` [PATCH 5/5] ARM: dts: omap4: Add l4 ranges for 4460 Tony Lindgren
4 siblings, 0 replies; 7+ messages in thread
From: Tony Lindgren @ 2018-07-09 6:36 UTC (permalink / raw)
To: linux-omap
Cc: Benoît Cousson, devicetree, Mark Rutland, Peter Ujfalusi,
Rob Herring, Tero Kristo
With l4 interconnect hierarchy and ti-sysc interconnect target module
data in place, we can simply move all the related child devices to
their proper location and enable probing using ti-sysc.
In general the first child device address range starts at range 0
from the ti-sysc interconnect target so the move involves adjusting
the child device reg properties for that.
And we cannot yet move mmu_dsp until we have a proper reset controller
driver for rstctrl registers.
In case of any regressions, problem devices can be reverted to probe
with legacy platform data as needed by moving them back and removing
the related interconnect target module node.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/omap4-l4.dtsi | 645 +++++++++++++++++++++-
arch/arm/boot/dts/omap4-panda-es.dts | 2 +-
arch/arm/boot/dts/omap4.dtsi | 781 +--------------------------
3 files changed, 643 insertions(+), 785 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -55,22 +55,83 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x2000 0x1000>;
+
+ omap4_scm_core: scm@0 {
+ compatible = "ti,omap4-scm-core", "simple-bus";
+ reg = <0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ omap_control_usb2phy: control-phy@300 {
+ compatible = "ti,control-phy-usb2";
+ reg = <0x300 0x4>;
+ reg-names = "power";
+ };
+
+ omap_control_usbotg: control-phy@33c {
+ compatible = "ti,control-phy-otghs";
+ reg = <0x33c 0x4>;
+ reg-names = "otghs_control";
+ };
+ };
};
target-module@4000 { /* 0x4a004000, ap 5 02.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x4000 0x4>;
+ reg-names = "rev";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x4000 0x1000>;
+
+ cm1: cm1@0 {
+ compatible = "ti,omap4-cm1", "simple-bus";
+ reg = <0x0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x2000>;
+
+ cm1_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm1_clockdomains: clockdomains {
+ };
+ };
};
target-module@8000 { /* 0x4a008000, ap 23 32.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x8000 0x4>;
+ reg-names = "rev";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x8000 0x2000>;
+
+ cm2: cm2@0 {
+ compatible = "ti,omap4-cm2", "simple-bus";
+ reg = <0x0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x2000>;
+
+ cm2_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm2_clockdomains: clockdomains {
+ };
+ };
};
target-module@56000 { /* 0x4a056000, ap 7 0a.0 */
@@ -97,6 +158,18 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x56000 0x1000>;
+
+ sdma: dma-controller@0 {
+ compatible = "ti,omap4430-sdma";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ dma-requests = <127>;
+ };
};
target-module@58000 { /* 0x4a058000, ap 10 0e.0 */
@@ -124,6 +197,39 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x58000 0x4000>;
+
+ hsi: hsi@0 {
+ compatible = "ti,omap4-hsi";
+ reg = <0x0 0x4000>,
+ <0x4a05c000 0x1000>;
+ reg-names = "sys", "gdd";
+
+ clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
+ clock-names = "hsi_fck";
+
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gdd_mpu";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x4000>;
+
+ hsi_port1: hsi-port@2000 {
+ compatible = "ti,omap4-hsi-port";
+ reg = <0x2000 0x800>,
+ <0x2800 0x800>;
+ reg-names = "tx", "rx";
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ hsi_port2: hsi-port@3000 {
+ compatible = "ti,omap4-hsi-port";
+ reg = <0x3000 0x800>,
+ <0x3800 0x800>;
+ reg-names = "tx", "rx";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
};
target-module@5e000 { /* 0x4a05e000, ap 80 68.0 */
@@ -154,6 +260,12 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x62000 0x1000>;
+
+ usbhstll: usbhstll@0 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
target-module@64000 { /* 0x4a064000, ap 86 1e.0 */
@@ -178,6 +290,33 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x64000 0x1000>;
+
+ usbhshost: usbhshost@0 {
+ compatible = "ti,usbhs-host";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+ clocks = <&init_60m_fclk>,
+ <&xclk60mhsp1_ck>,
+ <&xclk60mhsp2_ck>;
+ clock-names = "refclk_60m_int",
+ "refclk_60m_ext_p1",
+ "refclk_60m_ext_p2";
+
+ usbhsohci: ohci@800 {
+ compatible = "ti,ohci-omap3";
+ reg = <0x800 0x400>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ remote-wakeup-connected;
+ };
+
+ usbhsehci: ehci@c00 {
+ compatible = "ti,ehci-omap";
+ reg = <0xc00 0x400>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
};
target-module@66000 { /* 0x4a066000, ap 25 26.0 */
@@ -199,6 +338,9 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x66000 0x1000>;
+
+ /* mmu_dsp cannot be moved before reset driver */
+ status = "disabled";
};
};
@@ -261,6 +403,20 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x2b000 0x1000>;
+
+ usb_otg_hs: usb_otg_hs@0 {
+ compatible = "ti,omap4-musb";
+ reg = <0x0 0x7ff>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc", "dma";
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ ctrl-module = <&omap_control_usbotg>;
+ };
};
target-module@2d000 { /* 0x4a0ad000, ap 88 0c.0 */
@@ -282,6 +438,22 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x2d000 0x1000>;
+
+ ocp2scp@0 {
+ compatible = "ti,omap-ocp2scp";
+ reg = <0x0 0x1f>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000>;
+ usb2_phy: usb2phy@80 {
+ compatible = "ti,omap-usb2";
+ reg = <0x80 0x58>;
+ ctrl-module = <&omap_control_usb2phy>;
+ clocks = <&usb_phy_cm_clk32k>;
+ clock-names = "wkupclk";
+ #phy-cells = <0>;
+ };
+ };
};
target-module@36000 { /* 0x4a0b6000, ap 69 60.0 */
@@ -316,6 +488,12 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x59000 0x1000>;
+
+ smartreflex_mpu: smartreflex@0 {
+ compatible = "ti,omap4-smartreflex-mpu";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
target-module@5b000 { /* 0x4a0db000, ap 15 08.0 */
@@ -334,6 +512,12 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x5b000 0x1000>;
+
+ smartreflex_iva: smartreflex@0 {
+ compatible = "ti,omap4-smartreflex-iva";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
target-module@5d000 { /* 0x4a0dd000, ap 17 22.0 */
@@ -352,6 +536,12 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x5d000 0x1000>;
+
+ smartreflex_core: smartreflex@0 {
+ compatible = "ti,omap4-smartreflex-core";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
target-module@60000 { /* 0x4a0e0000, ap 19 1c.0 */
@@ -378,6 +568,23 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x74000 0x1000>;
+
+ mailbox: mailbox@0 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
+ mbox_ipu: mbox_ipu {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
+ mbox_dsp: mbox_dsp {
+ ti,mbox-tx = <3 0 0>;
+ ti,mbox-rx = <2 0 0>;
+ };
+ };
};
target-module@76000 { /* 0x4a0f6000, ap 29 3a.0 */
@@ -401,6 +608,12 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x76000 0x1000>;
+
+ hwspinlock: spinlock@0 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x0 0x1000>;
+ #hwlock-cells = <1>;
+ };
};
};
@@ -431,6 +644,39 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x1000>;
+
+ omap4_pmx_core: pinmux@40 {
+ compatible = "ti,omap4-padconf",
+ "pinctrl-single";
+ reg = <0x40 0x0196>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
+ omap4_padconf_global: omap4_padconf_global@5a0 {
+ compatible = "syscon",
+ "simple-bus";
+ reg = <0x5a0 0x170>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5a0 0x170>;
+
+ pbias_regulator: pbias_regulator@60 {
+ compatible = "ti,pbias-omap4", "ti,pbias-omap";
+ reg = <0x60 0x4>;
+ syscon = <&omap4_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap4 {
+ regulator-name = "pbias_mmc_omap4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
};
target-module@2000 { /* 0x4a102000, ap 61 3c.0 */
@@ -469,6 +715,8 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xa000 0x1000>;
+
+ /* No child device binding or driver in mainline */
};
};
@@ -717,22 +965,59 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x4000 0x1000>;
+
+ counter32k: counter@0 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x0 0x20>;
+ };
};
target-module@6000 { /* 0x4a306000, ap 3 08.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x6000 0x4>;
+ reg-names = "rev";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x6000 0x2000>;
+
+ prm: prm@0 {
+ compatible = "ti,omap4-prm";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x2000>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
+ };
};
target-module@a000 { /* 0x4a30a000, ap 15 34.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xa000 0x4>;
+ reg-names = "rev";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xa000 0x1000>;
+
+ scrm: scrm@0 {
+ compatible = "ti,omap4-scrm";
+ reg = <0x0 0x2000>;
+
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ scrm_clockdomains: clockdomains {
+ };
+ };
};
target-module@c000 { /* 0x4a30c000, ap 19 2c.0 */
@@ -749,6 +1034,11 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xc000 0x1000>;
+
+ omap4_scm_wkup: scm@c000 {
+ compatible = "ti,omap4-scm-wkup";
+ reg = <0xc000 0x1000>;
+ };
};
};
@@ -767,7 +1057,7 @@
<0x0000e000 0x0001e000 0x001000>, /* ap 21 */
<0x0000f000 0x0001f000 0x001000>; /* ap 22 */
- target-module@0 { /* 0x4a310000, ap 5 14.0 */
+ gpio1_target: target-module@0 { /* 0x4a310000, ap 5 14.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio1";
reg = <0x0 0x4>,
@@ -789,6 +1079,17 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x1000>;
+
+ gpio1: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ ti,gpio-always-on;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
target-module@4000 { /* 0x4a314000, ap 7 18.0 */
@@ -811,6 +1112,12 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x4000 0x1000>;
+
+ wdt2: wdt@0 {
+ compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
target-module@8000 { /* 0x4a318000, ap 9 1c.0 */
@@ -835,6 +1142,15 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x8000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-alwon;
+ };
};
target-module@c000 { /* 0x4a31c000, ap 11 20.0 */
@@ -859,6 +1175,13 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xc000 0x1000>;
+
+ keypad: keypad@0 {
+ compatible = "ti,omap4-keypad";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ reg-names = "mpu";
+ };
};
target-module@e000 { /* 0x4a31e000, ap 21 30.0 */
@@ -875,6 +1198,19 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xe000 0x1000>;
+
+ omap4_pmx_wkup: pinmux@40 {
+ compatible = "ti,omap4-padconf",
+ "pinctrl-single";
+ reg = <0x40 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
};
};
@@ -1054,6 +1390,13 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x20000 0x1000>;
+
+ uart3: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
};
target-module@32000 { /* 0x48032000, ap 5 02.0 */
@@ -1078,6 +1421,14 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x32000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
target-module@34000 { /* 0x48034000, ap 7 04.0 */
@@ -1098,6 +1449,14 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x34000 0x1000>;
+
+ timer3: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
target-module@36000 { /* 0x48036000, ap 9 0e.0 */
@@ -1118,6 +1477,14 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x36000 0x1000>;
+
+ timer4: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
target-module@3e000 { /* 0x4803e000, ap 11 08.0 */
@@ -1138,6 +1505,15 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x3e000 0x1000>;
+
+ timer9: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
};
target-module@40000 { /* 0x48040000, ap 13 0a.0 */
@@ -1170,6 +1546,16 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x55000 0x1000>;
+
+ gpio2: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
target-module@57000 { /* 0x48057000, ap 17 16.0 */
@@ -1194,6 +1580,16 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x57000 0x1000>;
+
+ gpio3: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
target-module@59000 { /* 0x48059000, ap 19 10.0 */
@@ -1218,6 +1614,16 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x59000 0x1000>;
+
+ gpio4: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
target-module@5b000 { /* 0x4805b000, ap 21 12.0 */
@@ -1242,6 +1648,16 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x5b000 0x1000>;
+
+ gpio5: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
target-module@5d000 { /* 0x4805d000, ap 23 14.0 */
@@ -1266,6 +1682,16 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x5d000 0x1000>;
+
+ gpio6: gpio@0 {
+ compatible = "ti,omap4-gpio";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
target-module@60000 { /* 0x48060000, ap 25 1e.0 */
@@ -1290,6 +1716,14 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x60000 0x1000>;
+
+ i2c3: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
target-module@6a000 { /* 0x4806a000, ap 26 18.0 */
@@ -1313,6 +1747,13 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x6a000 0x1000>;
+
+ uart1: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
};
target-module@6c000 { /* 0x4806c000, ap 28 20.0 */
@@ -1336,6 +1777,13 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x6c000 0x1000>;
+
+ uart2: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
};
target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */
@@ -1359,6 +1807,13 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x6e000 0x1000>;
+
+ uart4: serial@0 {
+ compatible = "ti,omap4-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ };
};
target-module@70000 { /* 0x48070000, ap 32 28.0 */
@@ -1383,6 +1838,14 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x70000 0x1000>;
+
+ i2c1: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
target-module@72000 { /* 0x48072000, ap 34 30.0 */
@@ -1407,6 +1870,14 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x72000 0x1000>;
+
+ i2c2: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
target-module@76000 { /* 0x48076000, ap 39 38.0 */
@@ -1426,6 +1897,8 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x76000 0x1000>;
+
+ /* No child device binding or driver in mainline */
};
target-module@78000 { /* 0x48078000, ap 41 1a.0 */
@@ -1448,6 +1921,13 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x78000 0x1000>;
+
+ elm: elm@0 {
+ compatible = "ti,am3352-elm";
+ reg = <0x0 0x2000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
};
target-module@86000 { /* 0x48086000, ap 43 24.0 */
@@ -1472,6 +1952,15 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x86000 0x1000>;
+
+ timer10: timer@0 {
+ compatible = "ti,omap3430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
};
target-module@88000 { /* 0x48088000, ap 45 2e.0 */
@@ -1492,6 +1981,15 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x88000 0x1000>;
+
+ timer11: timer@0 {
+ compatible = "ti,omap4430-timer";
+ reg = <0x0 0x80>;
+ clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
+ };
};
target-module@90000 { /* 0x48090000, ap 57 2a.0 */
@@ -1519,6 +2017,19 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x96000 0x1000>;
+
+ mcbsp4: mcbsp@0 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x0 0xff>; /* L4 Interconnect */
+ reg-names = "mpu";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common";
+ ti,buffer-size = <128>;
+ dmas = <&sdma 31>,
+ <&sdma 32>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
};
target-module@98000 { /* 0x48098000, ap 49 22.0 */
@@ -1539,6 +2050,25 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x98000 0x1000>;
+
+ mcspi1: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <4>;
+ dmas = <&sdma 35>,
+ <&sdma 36>,
+ <&sdma 37>,
+ <&sdma 38>,
+ <&sdma 39>,
+ <&sdma 40>,
+ <&sdma 41>,
+ <&sdma 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
};
target-module@9a000 { /* 0x4809a000, ap 51 2c.0 */
@@ -1559,6 +2089,20 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x9a000 0x1000>;
+
+ mcspi2: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma 43>,
+ <&sdma 44>,
+ <&sdma 45>,
+ <&sdma 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
};
target-module@9c000 { /* 0x4809c000, ap 53 36.0 */
@@ -1583,6 +2127,17 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x9c000 0x1000>;
+
+ mmc1: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ ti,dual-volt;
+ ti,needs-special-reset;
+ dmas = <&sdma 61>, <&sdma 62>;
+ dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
+ };
};
target-module@9e000 { /* 0x4809e000, ap 55 48.0 */
@@ -1640,6 +2195,15 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xad000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 77>, <&sdma 78>;
+ dma-names = "tx", "rx";
+ };
};
target-module@b0000 { /* 0x480b0000, ap 47 40.0 */
@@ -1667,6 +2231,12 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xb2000 0x1000>;
+
+ hdqw1w: 1w@0 {
+ compatible = "ti,omap3-1w";
+ reg = <0x0 0x1000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
target-module@b4000 { /* 0x480b4000, ap 67 46.0 */
@@ -1691,6 +2261,15 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xb4000 0x1000>;
+
+ mmc2: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 47>, <&sdma 48>;
+ dma-names = "tx", "rx";
+ };
};
target-module@b8000 { /* 0x480b8000, ap 69 58.0 */
@@ -1711,6 +2290,17 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xb8000 0x1000>;
+
+ mcspi3: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma 15>, <&sdma 16>;
+ dma-names = "tx0", "rx0";
+ };
};
target-module@ba000 { /* 0x480ba000, ap 71 32.0 */
@@ -1731,6 +2321,17 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xba000 0x1000>;
+
+ mcspi4: spi@0 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x0 0x200>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,spi-num-cs = <1>;
+ dmas = <&sdma 70>, <&sdma 71>;
+ dma-names = "tx0", "rx0";
+ };
};
target-module@d1000 { /* 0x480d1000, ap 73 44.0 */
@@ -1755,6 +2356,15 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xd1000 0x1000>;
+
+ mmc4: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 57>, <&sdma 58>;
+ dma-names = "tx", "rx";
+ };
};
target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */
@@ -1779,6 +2389,15 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xd5000 0x1000>;
+
+ mmc5: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x0 0x400>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ ti,needs-special-reset;
+ dmas = <&sdma 59>, <&sdma 60>;
+ dma-names = "tx", "rx";
+ };
};
};
@@ -1811,6 +2430,14 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x150000 0x1000>;
+
+ i2c4: i2c@0 {
+ compatible = "ti,omap4-i2c";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -68,6 +68,6 @@
};
};
-&gpio1 {
+&gpio1_target {
ti,no-reset-on-init;
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -139,174 +139,13 @@
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- l4_cfg: l4@4a000000 {
- compatible = "ti,omap4-l4-cfg", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4a000000 0x1000000>;
-
- cm1: cm1@4000 {
- compatible = "ti,omap4-cm1", "simple-bus";
- reg = <0x4000 0x2000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4000 0x2000>;
-
- cm1_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm1_clockdomains: clockdomains {
- };
- };
-
- cm2: cm2@8000 {
- compatible = "ti,omap4-cm2", "simple-bus";
- reg = <0x8000 0x2000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x8000 0x2000>;
-
- cm2_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm2_clockdomains: clockdomains {
- };
- };
-
- omap4_scm_core: scm@2000 {
- compatible = "ti,omap4-scm-core", "simple-bus";
- reg = <0x2000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x2000 0x1000>;
- ti,hwmods = "ctrl_module_core";
-
- scm_conf: scm_conf@0 {
- compatible = "syscon";
- reg = <0x0 0x800>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
- };
-
- omap4_padconf_core: scm@100000 {
- compatible = "ti,omap4-scm-padconf-core",
- "simple-bus";
- reg = <0x100000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x100000 0x1000>;
- ti,hwmods = "ctrl_module_pad_core";
-
- omap4_pmx_core: pinmux@40 {
- compatible = "ti,omap4-padconf",
- "pinctrl-single";
- reg = <0x40 0x0196>;
- #address-cells = <1>;
- #size-cells = <0>;
- #pinctrl-cells = <1>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
- };
-
- omap4_padconf_global: omap4_padconf_global@5a0 {
- compatible = "syscon",
- "simple-bus";
- reg = <0x5a0 0x170>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x5a0 0x170>;
-
- pbias_regulator: pbias_regulator@60 {
- compatible = "ti,pbias-omap4", "ti,pbias-omap";
- reg = <0x60 0x4>;
- syscon = <&omap4_padconf_global>;
- pbias_mmc_reg: pbias_mmc_omap4 {
- regulator-name = "pbias_mmc_omap4";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
- };
- };
- };
-
- l4_wkup: l4@300000 {
- compatible = "ti,omap4-l4-wkup", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x300000 0x40000>;
-
- counter32k: counter@4000 {
- compatible = "ti,omap-counter32k";
- reg = <0x4000 0x20>;
- ti,hwmods = "counter_32k";
- };
-
- prm: prm@6000 {
- compatible = "ti,omap4-prm";
- reg = <0x6000 0x2000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x6000 0x2000>;
-
- prm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- prm_clockdomains: clockdomains {
- };
- };
-
- scrm: scrm@a000 {
- compatible = "ti,omap4-scrm";
- reg = <0xa000 0x2000>;
-
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- scrm_clockdomains: clockdomains {
- };
- };
-
- omap4_scm_wkup: scm@c000 {
- compatible = "ti,omap4-scm-wkup";
- reg = <0xc000 0x1000>;
- ti,hwmods = "ctrl_module_wkup";
- };
+ l4_wkup: interconnect@4a300000 {
+ };
- omap4_padconf_wkup: padconf@1e000 {
- compatible = "ti,omap4-scm-padconf-wkup",
- "simple-bus";
- reg = <0x1e000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x1e000 0x1000>;
- ti,hwmods = "ctrl_module_pad_wkup";
+ l4_cfg: interconnect@4a000000 {
+ };
- omap4_pmx_wkup: pinmux@40 {
- compatible = "ti,omap4-padconf",
- "pinctrl-single";
- reg = <0x40 0x0038>;
- #address-cells = <1>;
- #size-cells = <0>;
- #pinctrl-cells = <1>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
- };
- };
- };
+ l4_per: interconnect@48000000 {
};
ocmcram: ocmcram@40304000 {
@@ -314,114 +153,6 @@
reg = <0x40304000 0xa000>; /* 40k */
};
- sdma: dma-controller@4a056000 {
- compatible = "ti,omap4430-sdma";
- reg = <0x4a056000 0x1000>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- dma-channels = <32>;
- dma-requests = <127>;
- ti,hwmods = "dma_system";
- };
-
- gpio1: gpio@4a310000 {
- compatible = "ti,omap4-gpio";
- reg = <0x4a310000 0x200>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "gpio1";
- ti,gpio-always-on;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@48055000 {
- compatible = "ti,omap4-gpio";
- reg = <0x48055000 0x200>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "gpio2";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@48057000 {
- compatible = "ti,omap4-gpio";
- reg = <0x48057000 0x200>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "gpio3";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@48059000 {
- compatible = "ti,omap4-gpio";
- reg = <0x48059000 0x200>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "gpio4";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio5: gpio@4805b000 {
- compatible = "ti,omap4-gpio";
- reg = <0x4805b000 0x200>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "gpio5";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio6: gpio@4805d000 {
- compatible = "ti,omap4-gpio";
- reg = <0x4805d000 0x200>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "gpio6";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- target-module@48076000 {
- compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "slimbus2";
- reg = <0x48076000 0x4>,
- <0x48076010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x48076000 0x001000>;
-
- /* No child device binding or driver in mainline */
- };
-
- elm: elm@48078000 {
- compatible = "ti,am3352-elm";
- reg = <0x48078000 0x2000>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "elm";
- status = "disabled";
- };
-
gpmc: gpmc@50000000 {
compatible = "ti,omap4430-gpmc";
reg = <0x50000000 0x1000>;
@@ -442,302 +173,6 @@
#gpio-cells = <2>;
};
- uart1: serial@4806a000 {
- compatible = "ti,omap4-uart";
- reg = <0x4806a000 0x100>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "uart1";
- clock-frequency = <48000000>;
- };
-
- uart2: serial@4806c000 {
- compatible = "ti,omap4-uart";
- reg = <0x4806c000 0x100>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "uart2";
- clock-frequency = <48000000>;
- };
-
- uart3: serial@48020000 {
- compatible = "ti,omap4-uart";
- reg = <0x48020000 0x100>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "uart3";
- clock-frequency = <48000000>;
- };
-
- uart4: serial@4806e000 {
- compatible = "ti,omap4-uart";
- reg = <0x4806e000 0x100>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "uart4";
- clock-frequency = <48000000>;
- };
-
- target-module@4a0db000 {
- compatible = "ti,sysc-omap4-sr", "ti,sysc";
- ti,hwmods = "smartreflex_iva";
- reg = <0x4a0db038 0x4>;
- reg-names = "sysc";
- ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4a0db000 0x001000>;
-
- smartreflex_iva: smartreflex@0 {
- compatible = "ti,omap4-smartreflex-iva";
- reg = <0 0x80>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- target-module@4a0dd000 {
- compatible = "ti,sysc-omap4-sr", "ti,sysc";
- ti,hwmods = "smartreflex_core";
- reg = <0x4a0dd038 0x4>;
- reg-names = "sysc";
- ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4a0dd000 0x001000>;
-
- smartreflex_core: smartreflex@0 {
- compatible = "ti,omap4-smartreflex-core";
- reg = <0 0x80>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- target-module@4a0d9000 {
- compatible = "ti,sysc-omap4-sr", "ti,sysc";
- ti,hwmods = "smartreflex_mpu";
- reg = <0x4a0d9038 0x4>;
- reg-names = "sysc";
- ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4a0d9000 0x001000>;
-
- smartreflex_mpu: smartreflex@0 {
- compatible = "ti,omap4-smartreflex-mpu";
- reg = <0 0x80>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- hwspinlock: spinlock@4a0f6000 {
- compatible = "ti,omap4-hwspinlock";
- reg = <0x4a0f6000 0x1000>;
- ti,hwmods = "spinlock";
- #hwlock-cells = <1>;
- };
-
- i2c1: i2c@48070000 {
- compatible = "ti,omap4-i2c";
- reg = <0x48070000 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "i2c1";
- };
-
- i2c2: i2c@48072000 {
- compatible = "ti,omap4-i2c";
- reg = <0x48072000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "i2c2";
- };
-
- i2c3: i2c@48060000 {
- compatible = "ti,omap4-i2c";
- reg = <0x48060000 0x100>;
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "i2c3";
- };
-
- i2c4: i2c@48350000 {
- compatible = "ti,omap4-i2c";
- reg = <0x48350000 0x100>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "i2c4";
- };
-
- mcspi1: spi@48098000 {
- compatible = "ti,omap4-mcspi";
- reg = <0x48098000 0x200>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "mcspi1";
- ti,spi-num-cs = <4>;
- dmas = <&sdma 35>,
- <&sdma 36>,
- <&sdma 37>,
- <&sdma 38>,
- <&sdma 39>,
- <&sdma 40>,
- <&sdma 41>,
- <&sdma 42>;
- dma-names = "tx0", "rx0", "tx1", "rx1",
- "tx2", "rx2", "tx3", "rx3";
- };
-
- mcspi2: spi@4809a000 {
- compatible = "ti,omap4-mcspi";
- reg = <0x4809a000 0x200>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "mcspi2";
- ti,spi-num-cs = <2>;
- dmas = <&sdma 43>,
- <&sdma 44>,
- <&sdma 45>,
- <&sdma 46>;
- dma-names = "tx0", "rx0", "tx1", "rx1";
- };
-
- hdqw1w: 1w@480b2000 {
- compatible = "ti,omap3-1w";
- reg = <0x480b2000 0x1000>;
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "hdq1w";
- };
-
- mcspi3: spi@480b8000 {
- compatible = "ti,omap4-mcspi";
- reg = <0x480b8000 0x200>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "mcspi3";
- ti,spi-num-cs = <2>;
- dmas = <&sdma 15>, <&sdma 16>;
- dma-names = "tx0", "rx0";
- };
-
- mcspi4: spi@480ba000 {
- compatible = "ti,omap4-mcspi";
- reg = <0x480ba000 0x200>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "mcspi4";
- ti,spi-num-cs = <1>;
- dmas = <&sdma 70>, <&sdma 71>;
- dma-names = "tx0", "rx0";
- };
-
- mmc1: mmc@4809c000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x4809c000 0x400>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmc1";
- ti,dual-volt;
- ti,needs-special-reset;
- dmas = <&sdma 61>, <&sdma 62>;
- dma-names = "tx", "rx";
- pbias-supply = <&pbias_mmc_reg>;
- };
-
- mmc2: mmc@480b4000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x480b4000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmc2";
- ti,needs-special-reset;
- dmas = <&sdma 47>, <&sdma 48>;
- dma-names = "tx", "rx";
- };
-
- mmc3: mmc@480ad000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x480ad000 0x400>;
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmc3";
- ti,needs-special-reset;
- dmas = <&sdma 77>, <&sdma 78>;
- dma-names = "tx", "rx";
- };
-
- mmc4: mmc@480d1000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x480d1000 0x400>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmc4";
- ti,needs-special-reset;
- dmas = <&sdma 57>, <&sdma 58>;
- dma-names = "tx", "rx";
- };
-
- mmc5: mmc@480d5000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x480d5000 0x400>;
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmc5";
- ti,needs-special-reset;
- dmas = <&sdma 59>, <&sdma 60>;
- dma-names = "tx", "rx";
- };
-
- hsi: hsi@4a058000 {
- compatible = "ti,omap4-hsi";
- reg = <0x4a058000 0x4000>,
- <0x4a05c000 0x1000>;
- reg-names = "sys", "gdd";
- ti,hwmods = "hsi";
-
- clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
- clock-names = "hsi_fck";
-
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gdd_mpu";
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4a058000 0x4000>;
-
- hsi_port1: hsi-port@2000 {
- compatible = "ti,omap4-hsi-port";
- reg = <0x2000 0x800>,
- <0x2800 0x800>;
- reg-names = "tx", "rx";
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- hsi_port2: hsi-port@3000 {
- compatible = "ti,omap4-hsi-port";
- reg = <0x3000 0x800>,
- <0x3800 0x800>;
- reg-names = "tx", "rx";
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
mmu_dsp: mmu@4a066000 {
compatible = "ti,omap4-iommu";
reg = <0x4a066000 0x100>;
@@ -779,14 +214,6 @@
#iommu-cells = <0>;
ti,iommu-bus-err-back;
};
-
- wdt2: wdt@4a314000 {
- compatible = "ti,omap4-wdt", "ti,omap3-wdt";
- reg = <0x4a314000 0x80>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "wd_timer2";
- };
-
target-module@40130000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "wd_timer3";
@@ -959,28 +386,6 @@
*/
};
- mcbsp4: mcbsp@48096000 {
- compatible = "ti,omap4-mcbsp";
- reg = <0x48096000 0xff>; /* L4 Interconnect */
- reg-names = "mpu";
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "common";
- ti,buffer-size = <128>;
- ti,hwmods = "mcbsp4";
- dmas = <&sdma 31>,
- <&sdma 32>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- keypad: keypad@4a31c000 {
- compatible = "ti,omap4-keypad";
- reg = <0x4a31c000 0x80>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- reg-names = "mpu";
- ti,hwmods = "kbd";
- };
-
dmm@4e000000 {
compatible = "ti,omap4-dmm";
reg = <0x4e000000 0x800>;
@@ -1012,95 +417,6 @@
hw-caps-temp-alert;
};
- ocp2scp@4a0ad000 {
- compatible = "ti,omap-ocp2scp";
- reg = <0x4a0ad000 0x1f>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- ti,hwmods = "ocp2scp_usb_phy";
- usb2_phy: usb2phy@4a0ad080 {
- compatible = "ti,omap-usb2";
- reg = <0x4a0ad080 0x58>;
- ctrl-module = <&omap_control_usb2phy>;
- clocks = <&usb_phy_cm_clk32k>;
- clock-names = "wkupclk";
- #phy-cells = <0>;
- };
- };
-
- mailbox: mailbox@4a0f4000 {
- compatible = "ti,omap4-mailbox";
- reg = <0x4a0f4000 0x200>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mailbox";
- #mbox-cells = <1>;
- ti,mbox-num-users = <3>;
- ti,mbox-num-fifos = <8>;
- mbox_ipu: mbox_ipu {
- ti,mbox-tx = <0 0 0>;
- ti,mbox-rx = <1 0 0>;
- };
- mbox_dsp: mbox_dsp {
- ti,mbox-tx = <3 0 0>;
- ti,mbox-rx = <2 0 0>;
- };
- };
-
- target-module@4a10a000 {
- compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "fdif";
- reg = <0x4a10a000 0x4>,
- <0x4a10a010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
- ti,sysc-midle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>;
- ti,sysc-delay-us = <2>;
- clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4a10a000 0x1000>;
-
- /* No child device binding or driver in mainline */
- };
-
- timer1: timer@4a318000 {
- compatible = "ti,omap3430-timer";
- reg = <0x4a318000 0x80>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer1";
- ti,timer-alwon;
- clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
- clock-names = "fck";
- };
-
- timer2: timer@48032000 {
- compatible = "ti,omap3430-timer";
- reg = <0x48032000 0x80>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer2";
- };
-
- timer3: timer@48034000 {
- compatible = "ti,omap4430-timer";
- reg = <0x48034000 0x80>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer3";
- };
-
- timer4: timer@48036000 {
- compatible = "ti,omap4430-timer";
- reg = <0x48036000 0x80>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer4";
- };
-
timer5: timer@40138000 {
compatible = "ti,omap4430-timer";
reg = <0x40138000 0x80>,
@@ -1138,92 +454,6 @@
ti,timer-dsp;
};
- timer9: timer@4803e000 {
- compatible = "ti,omap4430-timer";
- reg = <0x4803e000 0x80>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer9";
- ti,timer-pwm;
- };
-
- timer10: timer@48086000 {
- compatible = "ti,omap3430-timer";
- reg = <0x48086000 0x80>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer10";
- ti,timer-pwm;
- };
-
- timer11: timer@48088000 {
- compatible = "ti,omap4430-timer";
- reg = <0x48088000 0x80>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "timer11";
- ti,timer-pwm;
- };
-
- usbhstll: usbhstll@4a062000 {
- compatible = "ti,usbhs-tll";
- reg = <0x4a062000 0x1000>;
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "usb_tll_hs";
- };
-
- usbhshost: usbhshost@4a064000 {
- compatible = "ti,usbhs-host";
- reg = <0x4a064000 0x800>;
- ti,hwmods = "usb_host_hs";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&init_60m_fclk>,
- <&xclk60mhsp1_ck>,
- <&xclk60mhsp2_ck>;
- clock-names = "refclk_60m_int",
- "refclk_60m_ext_p1",
- "refclk_60m_ext_p2";
-
- usbhsohci: ohci@4a064800 {
- compatible = "ti,ohci-omap3";
- reg = <0x4a064800 0x400>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- remote-wakeup-connected;
- };
-
- usbhsehci: ehci@4a064c00 {
- compatible = "ti,ehci-omap";
- reg = <0x4a064c00 0x400>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- omap_control_usb2phy: control-phy@4a002300 {
- compatible = "ti,control-phy-usb2";
- reg = <0x4a002300 0x4>;
- reg-names = "power";
- };
-
- omap_control_usbotg: control-phy@4a00233c {
- compatible = "ti,control-phy-otghs";
- reg = <0x4a00233c 0x4>;
- reg-names = "otghs_control";
- };
-
- usb_otg_hs: usb_otg_hs@4a0ab000 {
- compatible = "ti,omap4-musb";
- reg = <0x4a0ab000 0x7ff>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mc", "dma";
- ti,hwmods = "usb_otg_hs";
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- multipoint = <1>;
- num-eps = <16>;
- ram-bits = <12>;
- ctrl-module = <&omap_control_usbotg>;
- };
-
aes1: aes@4b501000 {
compatible = "ti,omap4-aes";
ti,hwmods = "aes1";
@@ -1398,4 +628,5 @@
};
};
+#include "omap4-l4.dtsi"
#include "omap44xx-clocks.dtsi"
--
2.17.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 5/5] ARM: dts: omap4: Add l4 ranges for 4460
2018-07-09 6:36 [PATCH 0/5] Update omap4 l4 to probe with ti-sysc Tony Lindgren
` (3 preceding siblings ...)
2018-07-09 6:36 ` [PATCH 4/5] ARM: dts: omap4: Move l4 child devices to probe them " Tony Lindgren
@ 2018-07-09 6:36 ` Tony Lindgren
4 siblings, 0 replies; 7+ messages in thread
From: Tony Lindgren @ 2018-07-09 6:36 UTC (permalink / raw)
To: linux-omap
Cc: Benoît Cousson, devicetree, Mark Rutland, Peter Ujfalusi,
Rob Herring, Tero Kristo
Compared to 4430, 4460 and 4470 just have slightly different
l4 cfg ranges.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/omap4-l4.dtsi | 4 ++--
arch/arm/boot/dts/omap4460.dtsi | 36 +++++++++++++++++++++++++++++++++
2 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -888,7 +888,7 @@
#size-cells = <1>;
};
- segment@300000 { /* 0x4a300000 */
+ l4_cfg_segment_300000: segment@300000 { /* 0x4a300000 */
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -904,7 +904,7 @@
<0x0002a000 0x0032a000 0x002000>, /* ap 90 */
<0x0002c000 0x0032c000 0x004000>; /* ap 91 */
- target-module@0 { /* 0x4a300000, ap 67 14.0 */
+ l4_cfg_target_0: target-module@0 { /* 0x4a300000, ap 67 14.0 */
compatible = "ti,sysc";
status = "disabled";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -92,4 +92,40 @@
coefficients = <348 (-9301)>;
};
+/* Only some L4 CFG interconnect ranges are different on 4460 */
+&l4_cfg_segment_300000 {
+ ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */
+ <0x00040000 0x00340000 0x001000>, /* ap 68 */
+ <0x00020000 0x00320000 0x004000>, /* ap 71 */
+ <0x00024000 0x00324000 0x002000>, /* ap 72 */
+ <0x00026000 0x00326000 0x001000>, /* ap 73 */
+ <0x00027000 0x00327000 0x001000>, /* ap 74 */
+ <0x00028000 0x00328000 0x001000>, /* ap 75 */
+ <0x00029000 0x00329000 0x001000>, /* ap 76 */
+ <0x00030000 0x00330000 0x010000>, /* ap 77 */
+ <0x0002a000 0x0032a000 0x002000>, /* ap 90 */
+ <0x0002c000 0x0032c000 0x004000>, /* ap 91 */
+ <0x00010000 0x00310000 0x008000>, /* ap 92 */
+ <0x00018000 0x00318000 0x004000>, /* ap 93 */
+ <0x0001c000 0x0031c000 0x002000>, /* ap 94 */
+ <0x0001e000 0x0031e000 0x002000>; /* ap 95 */
+};
+
+&l4_cfg_target_0 {
+ ranges = <0x00000000 0x00000000 0x00010000>,
+ <0x00010000 0x00010000 0x00008000>,
+ <0x00018000 0x00018000 0x00004000>,
+ <0x0001c000 0x0001c000 0x00002000>,
+ <0x0001e000 0x0001e000 0x00002000>,
+ <0x00020000 0x00020000 0x00004000>,
+ <0x00024000 0x00024000 0x00002000>,
+ <0x00026000 0x00026000 0x00001000>,
+ <0x00027000 0x00027000 0x00001000>,
+ <0x00028000 0x00028000 0x00001000>,
+ <0x00029000 0x00029000 0x00001000>,
+ <0x0002a000 0x0002a000 0x00002000>,
+ <0x0002c000 0x0002c000 0x00004000>,
+ <0x00030000 0x00030000 0x00010000>;
+};
+
/include/ "omap446x-clocks.dtsi"
--
2.17.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/5] dt-bindings: Update omap l4 binding for optional registers
2018-07-09 6:36 ` [PATCH 1/5] dt-bindings: Update omap l4 binding for optional registers Tony Lindgren
@ 2018-07-20 14:11 ` Rob Herring
0 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2018-07-20 14:11 UTC (permalink / raw)
To: Tony Lindgren
Cc: linux-omap, Benoît Cousson, devicetree, Mark Rutland,
Tero Kristo, Peter Ujfalusi
On Sun, Jul 08, 2018 at 11:36:08PM -0700, Tony Lindgren wrote:
> The interconnects on omap variants have configuration registers.
> There are registers for a link agent, one or more interconnect
> agent, and an optional access protection.
>
> Let's also update the example for omap4 l4 per instance as it
> has multiple interconnect agent registers.
>
> For more information, see chapter "Interconnect" in TI techical
> reference manuals.
>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Tero Kristo <t-kristo@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> Documentation/devicetree/bindings/arm/omap/l4.txt | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-07-20 14:11 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-09 6:36 [PATCH 0/5] Update omap4 l4 to probe with ti-sysc Tony Lindgren
2018-07-09 6:36 ` [PATCH 1/5] dt-bindings: Update omap l4 binding for optional registers Tony Lindgren
2018-07-20 14:11 ` Rob Herring
2018-07-09 6:36 ` [PATCH 2/5] ARM: dts: omap4: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren
2018-07-09 6:36 ` [PATCH 3/5] ARM: dts: omap4: Probe watchdog 3 with ti-sysc Tony Lindgren
2018-07-09 6:36 ` [PATCH 4/5] ARM: dts: omap4: Move l4 child devices to probe them " Tony Lindgren
2018-07-09 6:36 ` [PATCH 5/5] ARM: dts: omap4: Add l4 ranges for 4460 Tony Lindgren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.