* [Buildroot] Orange Pi Prime does not boot
@ 2018-07-10 8:53 aai at tut.by
2018-07-10 9:18 ` Peter Korsgaard
2018-07-13 15:13 ` Jagan Teki
0 siblings, 2 replies; 8+ messages in thread
From: aai at tut.by @ 2018-07-10 8:53 UTC (permalink / raw)
To: buildroot
Hello,
orangepi_prime_defconfig does not work for me (try buildroot 2018.02.3 and 2018.05)
I do:
make orangepi_prime_defconfig
make
boot log:
--------------------------------------------------------------
Terminal ready
U-Boot SPL 2017.11 (Jul 09 2018 - 10:12:15)
DRAM: 2048 MiB
Trying to boot from MMC1
U-Boot 2017.11 (Jul 09 2018 - 10:12:15 +0300) Allwinner Technology
CPU: Allwinner H5 (SUN50I)
Model: OrangePi Prime
DRAM: 2 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
277 bytes read in 14 ms (18.6 KiB/s)
## Executing script at 4fc00000
reading Image
17365504 bytes read in 870 ms (19 MiB/s)
reading sun50i-h5-orangepi-prime.dtb
13714 bytes read in 25 ms (535.2 KiB/s)
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
Starting kernel ...
--------------------------------------------------------------
kernel does not load
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Orange Pi Prime does not boot
2018-07-10 8:53 [Buildroot] Orange Pi Prime does not boot aai at tut.by
@ 2018-07-10 9:18 ` Peter Korsgaard
2018-07-10 9:33 ` Jagan Teki
2018-07-13 15:13 ` Jagan Teki
1 sibling, 1 reply; 8+ messages in thread
From: Peter Korsgaard @ 2018-07-10 9:18 UTC (permalink / raw)
To: buildroot
>>>>> "aai" == aai <aai@tut.by> writes:
> Hello,
> orangepi_prime_defconfig does not work for me (try buildroot 2018.02.3 and 2018.05)
> I do:
> make orangepi_prime_defconfig
> make
Jagan, you added this defconfig. Any ideas?
> boot log:
> --------------------------------------------------------------
> Terminal ready
> U-Boot SPL 2017.11 (Jul 09 2018 - 10:12:15)
> DRAM: 2048 MiB
> Trying to boot from MMC1
> U-Boot 2017.11 (Jul 09 2018 - 10:12:15 +0300) Allwinner Technology
> CPU: Allwinner H5 (SUN50I)
> Model: OrangePi Prime
> DRAM: 2 GiB
> MMC: SUNXI SD/MMC: 0
> *** Warning - bad CRC, using default environment
> In: serial
> Out: serial
> Err: serial
> Net: No ethernet found.
> starting USB...
> USB0: USB EHCI 1.00
> USB1: USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> Found U-Boot script /boot.scr
> reading /boot.scr
> 277 bytes read in 14 ms (18.6 KiB/s)
> ## Executing script at 4fc00000
> reading Image
> 17365504 bytes read in 870 ms (19 MiB/s)
> reading sun50i-h5-orangepi-prime.dtb
> 13714 bytes read in 25 ms (535.2 KiB/s)
> ## Flattened Device Tree blob at 4fa00000
> Booting using the fdt blob at 0x4fa00000
> Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
> Starting kernel ...
> --------------------------------------------------------------
> kernel does not load
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Orange Pi Prime does not boot
2018-07-10 9:18 ` Peter Korsgaard
@ 2018-07-10 9:33 ` Jagan Teki
0 siblings, 0 replies; 8+ messages in thread
From: Jagan Teki @ 2018-07-10 9:33 UTC (permalink / raw)
To: buildroot
On Tue, Jul 10, 2018 at 2:48 PM, Peter Korsgaard <peter@korsgaard.com> wrote:
>>>>>> "aai" == aai <aai@tut.by> writes:
>
> > Hello,
> > orangepi_prime_defconfig does not work for me (try buildroot 2018.02.3 and 2018.05)
>
> > I do:
> > make orangepi_prime_defconfig
> > make
>
> Jagan, you added this defconfig. Any ideas?
Let me look at it, will come back once I tested.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Orange Pi Prime does not boot
2018-07-10 8:53 [Buildroot] Orange Pi Prime does not boot aai at tut.by
2018-07-10 9:18 ` Peter Korsgaard
@ 2018-07-13 15:13 ` Jagan Teki
2018-07-13 18:18 ` Peter Seiderer
1 sibling, 1 reply; 8+ messages in thread
From: Jagan Teki @ 2018-07-13 15:13 UTC (permalink / raw)
To: buildroot
On Tue, Jul 10, 2018 at 2:23 PM, <aai@tut.by> wrote:
> Hello,
>
> orangepi_prime_defconfig does not work for me (try buildroot 2018.02.3 and 2018.05)
>
> I do:
> make orangepi_prime_defconfig
> make
>
> boot log:
> --------------------------------------------------------------
> Terminal ready
>
> U-Boot SPL 2017.11 (Jul 09 2018 - 10:12:15)
> DRAM: 2048 MiB
> Trying to boot from MMC1
>
>
> U-Boot 2017.11 (Jul 09 2018 - 10:12:15 +0300) Allwinner Technology
>
> CPU: Allwinner H5 (SUN50I)
> Model: OrangePi Prime
> DRAM: 2 GiB
> MMC: SUNXI SD/MMC: 0
> *** Warning - bad CRC, using default environment
>
> In: serial
> Out: serial
> Err: serial
> Net: No ethernet found.
> starting USB...
> USB0: USB EHCI 1.00
> USB1: USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> Found U-Boot script /boot.scr
> reading /boot.scr
> 277 bytes read in 14 ms (18.6 KiB/s)
> ## Executing script at 4fc00000
> reading Image
> 17365504 bytes read in 870 ms (19 MiB/s)
> reading sun50i-h5-orangepi-prime.dtb
> 13714 bytes read in 25 ms (535.2 KiB/s)
> ## Flattened Device Tree blob at 4fa00000
> Booting using the fdt blob at 0x4fa00000
> Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
>
> Starting kernel ...
> --------------------------------------------------------------
It's booting fine with my side, here is full boot log[1]
[1] https://paste.ubuntu.com/p/mQsRxMrKnh/
Jagan.
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Orange Pi Prime does not boot
2018-07-13 15:13 ` Jagan Teki
@ 2018-07-13 18:18 ` Peter Seiderer
2018-07-16 13:23 ` aai at tut.by
0 siblings, 1 reply; 8+ messages in thread
From: Peter Seiderer @ 2018-07-13 18:18 UTC (permalink / raw)
To: buildroot
Hello,
On Fri, 13 Jul 2018 20:43:49 +0530, Jagan Teki <jagan@amarulasolutions.com> wrote:
> On Tue, Jul 10, 2018 at 2:23 PM, <aai@tut.by> wrote:
> > Hello,
> >
> > orangepi_prime_defconfig does not work for me (try buildroot 2018.02.3 and 2018.05)
> >
> > I do:
> > make orangepi_prime_defconfig
> > make
> >
> > boot log:
> > --------------------------------------------------------------
> > Terminal ready
> >
> > U-Boot SPL 2017.11 (Jul 09 2018 - 10:12:15)
> > DRAM: 2048 MiB
> > Trying to boot from MMC1
> >
> >
> > U-Boot 2017.11 (Jul 09 2018 - 10:12:15 +0300) Allwinner Technology
> >
> > CPU: Allwinner H5 (SUN50I)
> > Model: OrangePi Prime
> > DRAM: 2 GiB
> > MMC: SUNXI SD/MMC: 0
> > *** Warning - bad CRC, using default environment
> >
> > In: serial
> > Out: serial
> > Err: serial
> > Net: No ethernet found.
> > starting USB...
> > USB0: USB EHCI 1.00
> > USB1: USB OHCI 1.0
> > scanning bus 0 for devices... 1 USB Device(s) found
> > scanning usb for storage devices... 0 Storage Device(s) found
> > Hit any key to stop autoboot: 0
> > switch to partitions #0, OK
> > mmc0 is current device
> > Scanning mmc 0:1...
> > Found U-Boot script /boot.scr
> > reading /boot.scr
> > 277 bytes read in 14 ms (18.6 KiB/s)
> > ## Executing script at 4fc00000
> > reading Image
> > 17365504 bytes read in 870 ms (19 MiB/s)
> > reading sun50i-h5-orangepi-prime.dtb
> > 13714 bytes read in 25 ms (535.2 KiB/s)
> > ## Flattened Device Tree blob at 4fa00000
> > Booting using the fdt blob at 0x4fa00000
> > Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
From Jagans boot log:
reading /boot.scr
277 bytes read in 15 ms (17.6 KiB/s)
## Executing script at 4fc00000
reading Image
16310784 bytes read in 820 ms (19 MiB/s)
reading sun50i-h5-orangepi-prime.dtb
13714 bytes read in 26 ms (514.6 KiB/s)
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
Jagan Image size: 16310784
aai Image size: 17365504
The only visible difference (besides not booting)...
Regards,
Peter
> >
> > Starting kernel ...
> > --------------------------------------------------------------
>
> It's booting fine with my side, here is full boot log[1]
>
> [1] https://paste.ubuntu.com/p/mQsRxMrKnh/
>
> Jagan.
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Orange Pi Prime does not boot
2018-07-13 18:18 ` Peter Seiderer
@ 2018-07-16 13:23 ` aai at tut.by
2018-07-18 11:01 ` aai at tut.by
0 siblings, 1 reply; 8+ messages in thread
From: aai at tut.by @ 2018-07-16 13:23 UTC (permalink / raw)
To: buildroot
13.07.2018, 21:18, "Peter Seiderer" <ps.report@gmx.net>:
> Hello,
>
> On Fri, 13 Jul 2018 20:43:49 +0530, Jagan Teki <jagan@amarulasolutions.com> wrote:
>
>> ?On Tue, Jul 10, 2018 at 2:23 PM, <aai@tut.by> wrote:
>> ?> Hello,
>> ?>
>> ?> orangepi_prime_defconfig does not work for me (try buildroot 2018.02.3 and 2018.05)
>> ?>
>> ?> I do:
>> ?> make orangepi_prime_defconfig
>> ?> make
>> ?>
>> ?> boot log:
>> ?> --------------------------------------------------------------
>> ?> Terminal ready
>> ?>
>> ?> U-Boot SPL 2017.11 (Jul 09 2018 - 10:12:15)
>> ?> DRAM: 2048 MiB
>> ?> Trying to boot from MMC1
>> ?>
>> ?>
>> ?> U-Boot 2017.11 (Jul 09 2018 - 10:12:15 +0300) Allwinner Technology
>> ?>
>> ?> CPU: Allwinner H5 (SUN50I)
>> ?> Model: OrangePi Prime
>> ?> DRAM: 2 GiB
>> ?> MMC: SUNXI SD/MMC: 0
>> ?> *** Warning - bad CRC, using default environment
>> ?>
>> ?> In: serial
>> ?> Out: serial
>> ?> Err: serial
>> ?> Net: No ethernet found.
>> ?> starting USB...
>> ?> USB0: USB EHCI 1.00
>> ?> USB1: USB OHCI 1.0
>> ?> scanning bus 0 for devices... 1 USB Device(s) found
>> ?> scanning usb for storage devices... 0 Storage Device(s) found
>> ?> Hit any key to stop autoboot: 0
>> ?> switch to partitions #0, OK
>> ?> mmc0 is current device
>> ?> Scanning mmc 0:1...
>> ?> Found U-Boot script /boot.scr
>> ?> reading /boot.scr
>> ?> 277 bytes read in 14 ms (18.6 KiB/s)
>> ?> ## Executing script at 4fc00000
>> ?> reading Image
>> ?> 17365504 bytes read in 870 ms (19 MiB/s)
>> ?> reading sun50i-h5-orangepi-prime.dtb
>> ?> 13714 bytes read in 25 ms (535.2 KiB/s)
>> ?> ## Flattened Device Tree blob at 4fa00000
>> ?> Booting using the fdt blob at 0x4fa00000
>> ?> Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
>
> From Jagans boot log:
>
> reading /boot.scr
> 277 bytes read in 15 ms (17.6 KiB/s)
> ## Executing script at 4fc00000
> reading Image
> 16310784 bytes read in 820 ms (19 MiB/s)
> reading sun50i-h5-orangepi-prime.dtb
> 13714 bytes read in 26 ms (514.6 KiB/s)
> ## Flattened Device Tree blob at 4fa00000
> ???Booting using the fdt blob at 0x4fa00000
> ???Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
>
> Jagan Image size: 16310784
> aai Image size: 17365504
I built the image again on another computer. Image size is 16310784. But I can not check booting now.
I will try later, maybe by the end of the week
>
> The only visible difference (besides not booting)...
>
> Regards,
> Peter
>
>> ?>
>> ?> Starting kernel ...
>> ?> --------------------------------------------------------------
>>
>> ?It's booting fine with my side, here is full boot log[1]
>>
>> ?[1] https://paste.ubuntu.com/p/mQsRxMrKnh/
>>
>> ?Jagan.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Orange Pi Prime does not boot
2018-07-16 13:23 ` aai at tut.by
@ 2018-07-18 11:01 ` aai at tut.by
2018-07-18 11:10 ` Christoph Engelbert
0 siblings, 1 reply; 8+ messages in thread
From: aai at tut.by @ 2018-07-18 11:01 UTC (permalink / raw)
To: buildroot
16.07.2018, 16:23, "aai at tut.by" <aai@tut.by>:
> 13.07.2018, 21:18, "Peter Seiderer" <ps.report@gmx.net>:
>> ?Hello,
>>
>> ?On Fri, 13 Jul 2018 20:43:49 +0530, Jagan Teki <jagan@amarulasolutions.com> wrote:
>>
>>> ??On Tue, Jul 10, 2018 at 2:23 PM, <aai@tut.by> wrote:
>>> ??> Hello,
>>> ??>
>>> ??> orangepi_prime_defconfig does not work for me (try buildroot 2018.02.3 and 2018.05)
>>> ??>
>>> ??> I do:
>>> ??> make orangepi_prime_defconfig
>>> ??> make
>>> ??>
>>> ??> boot log:
>>> ??> --------------------------------------------------------------
>>> ??> Terminal ready
>>> ??>
>>> ??> U-Boot SPL 2017.11 (Jul 09 2018 - 10:12:15)
>>> ??> DRAM: 2048 MiB
>>> ??> Trying to boot from MMC1
>>> ??>
>>> ??>
>>> ??> U-Boot 2017.11 (Jul 09 2018 - 10:12:15 +0300) Allwinner Technology
>>> ??>
>>> ??> CPU: Allwinner H5 (SUN50I)
>>> ??> Model: OrangePi Prime
>>> ??> DRAM: 2 GiB
>>> ??> MMC: SUNXI SD/MMC: 0
>>> ??> *** Warning - bad CRC, using default environment
>>> ??>
>>> ??> In: serial
>>> ??> Out: serial
>>> ??> Err: serial
>>> ??> Net: No ethernet found.
>>> ??> starting USB...
>>> ??> USB0: USB EHCI 1.00
>>> ??> USB1: USB OHCI 1.0
>>> ??> scanning bus 0 for devices... 1 USB Device(s) found
>>> ??> scanning usb for storage devices... 0 Storage Device(s) found
>>> ??> Hit any key to stop autoboot: 0
>>> ??> switch to partitions #0, OK
>>> ??> mmc0 is current device
>>> ??> Scanning mmc 0:1...
>>> ??> Found U-Boot script /boot.scr
>>> ??> reading /boot.scr
>>> ??> 277 bytes read in 14 ms (18.6 KiB/s)
>>> ??> ## Executing script at 4fc00000
>>> ??> reading Image
>>> ??> 17365504 bytes read in 870 ms (19 MiB/s)
>>> ??> reading sun50i-h5-orangepi-prime.dtb
>>> ??> 13714 bytes read in 25 ms (535.2 KiB/s)
>>> ??> ## Flattened Device Tree blob at 4fa00000
>>> ??> Booting using the fdt blob at 0x4fa00000
>>> ??> Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
>>
>> ?From Jagans boot log:
>>
>> ?reading /boot.scr
>> ?277 bytes read in 15 ms (17.6 KiB/s)
>> ?## Executing script at 4fc00000
>> ?reading Image
>> ?16310784 bytes read in 820 ms (19 MiB/s)
>> ?reading sun50i-h5-orangepi-prime.dtb
>> ?13714 bytes read in 26 ms (514.6 KiB/s)
>> ?## Flattened Device Tree blob at 4fa00000
>> ????Booting using the fdt blob at 0x4fa00000
>> ????Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
>>
>> ?Jagan Image size: 16310784
>> ?aai Image size: 17365504
>
> I built the image again on another computer. Image size is 16310784. But I can not check booting now.
> I will try later, maybe by the end of the week
17365504 - I made a mistake and posted the wrong log with optimization level 2.
I tried Buildroot 2018.05 + Ubuntu 16.04 and Buildroot 2018.02.3 + Fedors 28. Not work.
Maybe my board is broken, but Armbian 5.38 works.
>
>> ?The only visible difference (besides not booting)...
>>
>> ?Regards,
>> ?Peter
>>
>>> ??>
>>> ??> Starting kernel ...
>>> ??> --------------------------------------------------------------
>>>
>>> ??It's booting fine with my side, here is full boot log[1]
>>>
>>> ??[1] https://paste.ubuntu.com/p/mQsRxMrKnh/
>>>
>>> ??Jagan.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] Orange Pi Prime does not boot
2018-07-18 11:01 ` aai at tut.by
@ 2018-07-18 11:10 ` Christoph Engelbert
0 siblings, 0 replies; 8+ messages in thread
From: Christoph Engelbert @ 2018-07-18 11:10 UTC (permalink / raw)
To: buildroot
If the board just stops when loading the kernel you?re most probably having an issue with the memory address, like overwriting parts of the extracted kernel (for example) with the device tree.
Try to change the load address for the kernel. Had the same base issue with my kernel and the nanopi neo air board.
Chris
> On 18. Jul 2018, at 13:01, aai at tut.by wrote:
>
>
>
> 16.07.2018, 16:23, "aai at tut.by" <aai@tut.by>:
>> 13.07.2018, 21:18, "Peter Seiderer" <ps.report@gmx.net>:
>>> Hello,
>>>
>>> On Fri, 13 Jul 2018 20:43:49 +0530, Jagan Teki <jagan@amarulasolutions.com> wrote:
>>>
>>>> On Tue, Jul 10, 2018 at 2:23 PM, <aai@tut.by> wrote:
>>>> > Hello,
>>>> >
>>>> > orangepi_prime_defconfig does not work for me (try buildroot 2018.02.3 and 2018.05)
>>>> >
>>>> > I do:
>>>> > make orangepi_prime_defconfig
>>>> > make
>>>> >
>>>> > boot log:
>>>> > --------------------------------------------------------------
>>>> > Terminal ready
>>>> >
>>>> > U-Boot SPL 2017.11 (Jul 09 2018 - 10:12:15)
>>>> > DRAM: 2048 MiB
>>>> > Trying to boot from MMC1
>>>> >
>>>> >
>>>> > U-Boot 2017.11 (Jul 09 2018 - 10:12:15 +0300) Allwinner Technology
>>>> >
>>>> > CPU: Allwinner H5 (SUN50I)
>>>> > Model: OrangePi Prime
>>>> > DRAM: 2 GiB
>>>> > MMC: SUNXI SD/MMC: 0
>>>> > *** Warning - bad CRC, using default environment
>>>> >
>>>> > In: serial
>>>> > Out: serial
>>>> > Err: serial
>>>> > Net: No ethernet found.
>>>> > starting USB...
>>>> > USB0: USB EHCI 1.00
>>>> > USB1: USB OHCI 1.0
>>>> > scanning bus 0 for devices... 1 USB Device(s) found
>>>> > scanning usb for storage devices... 0 Storage Device(s) found
>>>> > Hit any key to stop autoboot: 0
>>>> > switch to partitions #0, OK
>>>> > mmc0 is current device
>>>> > Scanning mmc 0:1...
>>>> > Found U-Boot script /boot.scr
>>>> > reading /boot.scr
>>>> > 277 bytes read in 14 ms (18.6 KiB/s)
>>>> > ## Executing script at 4fc00000
>>>> > reading Image
>>>> > 17365504 bytes read in 870 ms (19 MiB/s)
>>>> > reading sun50i-h5-orangepi-prime.dtb
>>>> > 13714 bytes read in 25 ms (535.2 KiB/s)
>>>> > ## Flattened Device Tree blob at 4fa00000
>>>> > Booting using the fdt blob at 0x4fa00000
>>>> > Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
>>>
>>> From Jagans boot log:
>>>
>>> reading /boot.scr
>>> 277 bytes read in 15 ms (17.6 KiB/s)
>>> ## Executing script at 4fc00000
>>> reading Image
>>> 16310784 bytes read in 820 ms (19 MiB/s)
>>> reading sun50i-h5-orangepi-prime.dtb
>>> 13714 bytes read in 26 ms (514.6 KiB/s)
>>> ## Flattened Device Tree blob at 4fa00000
>>> Booting using the fdt blob at 0x4fa00000
>>> Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
>>>
>>> Jagan Image size: 16310784
>>> aai Image size: 17365504
>>
>> I built the image again on another computer. Image size is 16310784. But I can not check booting now.
>> I will try later, maybe by the end of the week
>
>
> 17365504 - I made a mistake and posted the wrong log with optimization level 2.
>
> I tried Buildroot 2018.05 + Ubuntu 16.04 and Buildroot 2018.02.3 + Fedors 28. Not work.
>
> Maybe my board is broken, but Armbian 5.38 works.
>
>
>>
>>> The only visible difference (besides not booting)...
>>>
>>> Regards,
>>> Peter
>>>
>>>> >
>>>> > Starting kernel ...
>>>> > --------------------------------------------------------------
>>>>
>>>> It's booting fine with my side, here is full boot log[1]
>>>>
>>>> [1] https://paste.ubuntu.com/p/mQsRxMrKnh/
>>>>
>>>> Jagan.
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-07-18 11:10 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-10 8:53 [Buildroot] Orange Pi Prime does not boot aai at tut.by
2018-07-10 9:18 ` Peter Korsgaard
2018-07-10 9:33 ` Jagan Teki
2018-07-13 15:13 ` Jagan Teki
2018-07-13 18:18 ` Peter Seiderer
2018-07-16 13:23 ` aai at tut.by
2018-07-18 11:01 ` aai at tut.by
2018-07-18 11:10 ` Christoph Engelbert
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.