[PATCH V3 00/16] PM / OPP: Introduce APIs to transition OPPs

[PATCH V3 00/16] PM / OPP: Introduce APIs to transition OPPs

[Viresh Kumar]

Hi Guys,

This patchset add APIs in OPP layer to allow OPPs transitioning from
within OPP layer. Currently all OPP users need to replicate the same
code to switch between OPPs. While the same can be handled easily by
OPP-core.

The first 7 patches update the OPP core to introduce the new APIs and
the next Nine patches update cpufreq-dt for the same.

11 out of 17 are already Reviewed by Stephen, only few are left :)

I hope this is the last version of the series :)

Testing:
- Tested on exynos 5250-arndale (dual-cortex-A15)
- Tested for both Old-V1 bindings and New V2 bindings
- Tested with regulator names as: 'cpu-supply' and 'cpu0-supply'
- Tested with Unsupported supply ranges as well, to check the
  opp-disable logic

V2->V3:
- Very minor updates.
- find_supply_name() doesn't return an error value now, and so its
  callers don't check for it.
- And so we don't need to initialize name to NULL

Viresh Kumar (16):
  PM / OPP: get/put regulators from OPP core
  PM / OPP: Disable OPPs that aren't supported by the regulator
  PM / OPP: Introduce dev_pm_opp_get_max_volt_latency()
  PM / OPP: Introduce dev_pm_opp_get_max_transition_latency()
  PM / OPP: Parse clock-latency and voltage-tolerance for v1 bindings
  PM / OPP: Manage device clk
  PM / OPP: Add dev_pm_opp_set_rate()
  cpufreq: dt: Convert few pr_debug/err() calls to dev_dbg/err()
  cpufreq: dt: Rename 'need_update' to 'opp_v1'
  cpufreq: dt: OPP layers handles clock-latency for V1 bindings as well
  cpufreq: dt: Pass regulator name to the OPP core
  cpufreq: dt: Unsupported OPPs are already disabled
  cpufreq: dt: Reuse dev_pm_opp_get_max_transition_latency()
  cpufreq: dt: Use dev_pm_opp_set_rate() to switch frequency
  cpufreq: dt: No need to fetch voltage-tolerance
  cpufreq: dt: No need to allocate resources anymore

 drivers/base/power/opp/core.c | 420 ++++++++++++++++++++++++++++++++++++++++++
 drivers/base/power/opp/opp.h  |  13 ++
 drivers/cpufreq/cpufreq-dt.c  | 300 +++++++++++-------------------
 include/linux/pm_opp.h        |  27 +++
 4 files changed, 565 insertions(+), 195 deletions(-)

-- 
2.7.1.370.gb2aa7f8

[PATCH V3 01/16] PM / OPP: get/put regulators from OPP core

[Viresh Kumar]

This allows the OPP core to request/free the regulator resource,
attached to a device OPP. The regulator device is fetched using the name
provided by the driver, while calling: dev_pm_opp_set_regulator().

This will work for both OPP-v1 and v2 bindings.

This is a preliminary step for moving the OPP switching logic into the
OPP core.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/core.c | 111 ++++++++++++++++++++++++++++++++++++++++++
 drivers/base/power/opp/opp.h  |   4 ++
 include/linux/pm_opp.h        |   9 ++++
 3 files changed, 124 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index cf351d3dab1c..1e22b71abf1e 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -19,6 +19,7 @@
 #include <linux/device.h>
 #include <linux/of.h>
 #include <linux/export.h>
+#include <linux/regulator/consumer.h>
 
 #include "opp.h"
 
@@ -565,6 +566,9 @@ static void _remove_device_opp(struct device_opp *dev_opp)
 	if (dev_opp->prop_name)
 		return;
 
+	if (!IS_ERR_OR_NULL(dev_opp->regulator))
+		return;
+
 	list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp,
 				    node);
 
@@ -1085,6 +1089,113 @@ void dev_pm_opp_put_prop_name(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
 
+/**
+ * dev_pm_opp_set_regulator() - Set regulator name for the device
+ * @dev: Device for which regulator name is being set.
+ * @name: Name of the regulator.
+ *
+ * In order to support OPP switching, OPP layer needs to know the name of the
+ * device's regulator, as the core would be required to switch voltages as well.
+ *
+ * This must be called before any OPPs are initialized for the device.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_set_regulator(struct device *dev, const char *name)
+{
+	struct device_opp *dev_opp;
+	struct regulator *reg;
+	int ret;
+
+	mutex_lock(&dev_opp_list_lock);
+
+	dev_opp = _add_device_opp(dev);
+	if (!dev_opp) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	/* This should be called before OPPs are initialized */
+	if (WARN_ON(!list_empty(&dev_opp->opp_list))) {
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/* Already have a regulator set */
+	if (WARN_ON(!IS_ERR_OR_NULL(dev_opp->regulator))) {
+		ret = -EBUSY;
+		goto err;
+	}
+	/* Allocate the regulator */
+	reg = regulator_get_optional(dev, name);
+	if (IS_ERR(reg)) {
+		ret = PTR_ERR(reg);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "%s: no regulator (%s) found: %d\n",
+				__func__, name, ret);
+		goto err;
+	}
+
+	dev_opp->regulator = reg;
+
+	mutex_unlock(&dev_opp_list_lock);
+	return 0;
+
+err:
+	_remove_device_opp(dev_opp);
+unlock:
+	mutex_unlock(&dev_opp_list_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulator);
+
+/**
+ * dev_pm_opp_put_regulator() - Releases resources blocked for regulator
+ * @dev: Device for which regulator was set.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_put_regulator(struct device *dev)
+{
+	struct device_opp *dev_opp;
+
+	mutex_lock(&dev_opp_list_lock);
+
+	/* Check for existing list for 'dev' first */
+	dev_opp = _find_device_opp(dev);
+	if (IS_ERR(dev_opp)) {
+		dev_err(dev, "Failed to find dev_opp: %ld\n", PTR_ERR(dev_opp));
+		goto unlock;
+	}
+
+	if (IS_ERR_OR_NULL(dev_opp->regulator)) {
+		dev_err(dev, "%s: Doesn't have regulator set\n", __func__);
+		goto unlock;
+	}
+
+	/* Make sure there are no concurrent readers while updating dev_opp */
+	WARN_ON(!list_empty(&dev_opp->opp_list));
+
+	regulator_put(dev_opp->regulator);
+	dev_opp->regulator = ERR_PTR(-EINVAL);
+
+	/* Try freeing device_opp if this was the last blocking resource */
+	_remove_device_opp(dev_opp);
+
+unlock:
+	mutex_unlock(&dev_opp_list_lock);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator);
+
 static bool _opp_is_supported(struct device *dev, struct device_opp *dev_opp,
 			      struct device_node *np)
 {
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index 690638ef36ee..416293b7da23 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -22,6 +22,8 @@
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
 
+struct regulator;
+
 /* Lock to allow exclusive modification to the device and opp lists */
 extern struct mutex dev_opp_list_lock;
 
@@ -132,6 +134,7 @@ struct device_list_opp {
  * @supported_hw: Array of version number to support.
  * @supported_hw_count: Number of elements in supported_hw array.
  * @prop_name: A name to postfix to many DT properties, while parsing them.
+ * @regulator: Supply regulator
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
  *
@@ -159,6 +162,7 @@ struct device_opp {
 	unsigned int *supported_hw;
 	unsigned int supported_hw_count;
 	const char *prop_name;
+	struct regulator *regulator;
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dentry;
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 95403d2ccaf5..c70a18ac9c8a 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -60,6 +60,8 @@ int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions,
 void dev_pm_opp_put_supported_hw(struct device *dev);
 int dev_pm_opp_set_prop_name(struct device *dev, const char *name);
 void dev_pm_opp_put_prop_name(struct device *dev);
+int dev_pm_opp_set_regulator(struct device *dev, const char *name);
+void dev_pm_opp_put_regulator(struct device *dev);
 #else
 static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 {
@@ -151,6 +153,13 @@ static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
 
 static inline void dev_pm_opp_put_prop_name(struct device *dev) {}
 
+static inline int dev_pm_opp_set_regulator(struct device *dev, const char *name)
+{
+	return -EINVAL;
+}
+
+static inline void dev_pm_opp_put_regulator(struct device *dev) {}
+
 #endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 01/16] PM / OPP: get/put regulators from OPP core

[Viresh Kumar]

This allows the OPP core to request/free the regulator resource,
attached to a device OPP. The regulator device is fetched using the name
provided by the driver, while calling: dev_pm_opp_set_regulator().

This will work for both OPP-v1 and v2 bindings.

This is a preliminary step for moving the OPP switching logic into the
OPP core.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/core.c | 111 ++++++++++++++++++++++++++++++++++++++++++
 drivers/base/power/opp/opp.h  |   4 ++
 include/linux/pm_opp.h        |   9 ++++
 3 files changed, 124 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index cf351d3dab1c..1e22b71abf1e 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -19,6 +19,7 @@
 #include <linux/device.h>
 #include <linux/of.h>
 #include <linux/export.h>
+#include <linux/regulator/consumer.h>
 
 #include "opp.h"
 
@@ -565,6 +566,9 @@ static void _remove_device_opp(struct device_opp *dev_opp)
 	if (dev_opp->prop_name)
 		return;
 
+	if (!IS_ERR_OR_NULL(dev_opp->regulator))
+		return;
+
 	list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp,
 				    node);
 
@@ -1085,6 +1089,113 @@ void dev_pm_opp_put_prop_name(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
 
+/**
+ * dev_pm_opp_set_regulator() - Set regulator name for the device
+ * @dev: Device for which regulator name is being set.
+ * @name: Name of the regulator.
+ *
+ * In order to support OPP switching, OPP layer needs to know the name of the
+ * device's regulator, as the core would be required to switch voltages as well.
+ *
+ * This must be called before any OPPs are initialized for the device.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_set_regulator(struct device *dev, const char *name)
+{
+	struct device_opp *dev_opp;
+	struct regulator *reg;
+	int ret;
+
+	mutex_lock(&dev_opp_list_lock);
+
+	dev_opp = _add_device_opp(dev);
+	if (!dev_opp) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	/* This should be called before OPPs are initialized */
+	if (WARN_ON(!list_empty(&dev_opp->opp_list))) {
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/* Already have a regulator set */
+	if (WARN_ON(!IS_ERR_OR_NULL(dev_opp->regulator))) {
+		ret = -EBUSY;
+		goto err;
+	}
+	/* Allocate the regulator */
+	reg = regulator_get_optional(dev, name);
+	if (IS_ERR(reg)) {
+		ret = PTR_ERR(reg);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "%s: no regulator (%s) found: %d\n",
+				__func__, name, ret);
+		goto err;
+	}
+
+	dev_opp->regulator = reg;
+
+	mutex_unlock(&dev_opp_list_lock);
+	return 0;
+
+err:
+	_remove_device_opp(dev_opp);
+unlock:
+	mutex_unlock(&dev_opp_list_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulator);
+
+/**
+ * dev_pm_opp_put_regulator() - Releases resources blocked for regulator
+ * @dev: Device for which regulator was set.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_put_regulator(struct device *dev)
+{
+	struct device_opp *dev_opp;
+
+	mutex_lock(&dev_opp_list_lock);
+
+	/* Check for existing list for 'dev' first */
+	dev_opp = _find_device_opp(dev);
+	if (IS_ERR(dev_opp)) {
+		dev_err(dev, "Failed to find dev_opp: %ld\n", PTR_ERR(dev_opp));
+		goto unlock;
+	}
+
+	if (IS_ERR_OR_NULL(dev_opp->regulator)) {
+		dev_err(dev, "%s: Doesn't have regulator set\n", __func__);
+		goto unlock;
+	}
+
+	/* Make sure there are no concurrent readers while updating dev_opp */
+	WARN_ON(!list_empty(&dev_opp->opp_list));
+
+	regulator_put(dev_opp->regulator);
+	dev_opp->regulator = ERR_PTR(-EINVAL);
+
+	/* Try freeing device_opp if this was the last blocking resource */
+	_remove_device_opp(dev_opp);
+
+unlock:
+	mutex_unlock(&dev_opp_list_lock);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator);
+
 static bool _opp_is_supported(struct device *dev, struct device_opp *dev_opp,
 			      struct device_node *np)
 {
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index 690638ef36ee..416293b7da23 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -22,6 +22,8 @@
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
 
+struct regulator;
+
 /* Lock to allow exclusive modification to the device and opp lists */
 extern struct mutex dev_opp_list_lock;
 
@@ -132,6 +134,7 @@ struct device_list_opp {
  * @supported_hw: Array of version number to support.
  * @supported_hw_count: Number of elements in supported_hw array.
  * @prop_name: A name to postfix to many DT properties, while parsing them.
+ * @regulator: Supply regulator
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
  *
@@ -159,6 +162,7 @@ struct device_opp {
 	unsigned int *supported_hw;
 	unsigned int supported_hw_count;
 	const char *prop_name;
+	struct regulator *regulator;
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dentry;
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 95403d2ccaf5..c70a18ac9c8a 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -60,6 +60,8 @@ int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions,
 void dev_pm_opp_put_supported_hw(struct device *dev);
 int dev_pm_opp_set_prop_name(struct device *dev, const char *name);
 void dev_pm_opp_put_prop_name(struct device *dev);
+int dev_pm_opp_set_regulator(struct device *dev, const char *name);
+void dev_pm_opp_put_regulator(struct device *dev);
 #else
 static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 {
@@ -151,6 +153,13 @@ static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
 
 static inline void dev_pm_opp_put_prop_name(struct device *dev) {}
 
+static inline int dev_pm_opp_set_regulator(struct device *dev, const char *name)
+{
+	return -EINVAL;
+}
+
+static inline void dev_pm_opp_put_regulator(struct device *dev) {}
+
 #endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 02/16] PM / OPP: Disable OPPs that aren't supported by the regulator

Disable any OPPs where the connected regulator isn't able to provide the
specified voltage.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/base/power/opp/core.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 1e22b71abf1e..71545becfca1 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -687,6 +687,22 @@ static struct dev_pm_opp *_allocate_opp(struct device *dev,
 	return opp;
 }
 
+static bool _opp_supported_by_regulators(struct dev_pm_opp *opp,
+					 struct device_opp *dev_opp)
+{
+	struct regulator *reg = dev_opp->regulator;
+
+	if (!IS_ERR(reg) &&
+	    !regulator_is_supported_voltage(reg, opp->u_volt_min,
+					    opp->u_volt_max)) {
+		pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",
+			__func__, opp->u_volt_min, opp->u_volt_max);
+		return false;
+	}
+
+	return true;
+}
+
 static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 		    struct device_opp *dev_opp)
 {
@@ -728,6 +744,12 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 		dev_err(dev, "%s: Failed to register opp to debugfs (%d)\n",
 			__func__, ret);
 
+	if (!_opp_supported_by_regulators(new_opp, dev_opp)) {
+		new_opp->available = false;
+		dev_warn(dev, "%s: OPP not supported by regulators (%lu)\n",
+			 __func__, new_opp->rate);
+	}
+
 	return 0;
 }
 
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 02/16] PM / OPP: Disable OPPs that aren't supported by the regulator

[Viresh Kumar]

Disable any OPPs where the connected regulator isn't able to provide the
specified voltage.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/base/power/opp/core.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 1e22b71abf1e..71545becfca1 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -687,6 +687,22 @@ static struct dev_pm_opp *_allocate_opp(struct device *dev,
 	return opp;
 }
 
+static bool _opp_supported_by_regulators(struct dev_pm_opp *opp,
+					 struct device_opp *dev_opp)
+{
+	struct regulator *reg = dev_opp->regulator;
+
+	if (!IS_ERR(reg) &&
+	    !regulator_is_supported_voltage(reg, opp->u_volt_min,
+					    opp->u_volt_max)) {
+		pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",
+			__func__, opp->u_volt_min, opp->u_volt_max);
+		return false;
+	}
+
+	return true;
+}
+
 static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 		    struct device_opp *dev_opp)
 {
@@ -728,6 +744,12 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 		dev_err(dev, "%s: Failed to register opp to debugfs (%d)\n",
 			__func__, ret);
 
+	if (!_opp_supported_by_regulators(new_opp, dev_opp)) {
+		new_opp->available = false;
+		dev_warn(dev, "%s: OPP not supported by regulators (%lu)\n",
+			 __func__, new_opp->rate);
+	}
+
 	return 0;
 }
 
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 03/16] PM / OPP: Introduce dev_pm_opp_get_max_volt_latency()

[Viresh Kumar]

In few use cases (like: cpufreq), it is desired to get the maximum
voltage latency for changing OPPs. Add support for that.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/core.c | 59 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h        |  6 +++++
 2 files changed, 65 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 71545becfca1..ffe2406af882 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -231,6 +231,65 @@ unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev)
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_clock_latency);
 
 /**
+ * dev_pm_opp_get_max_volt_latency() - Get max voltage latency in nanoseconds
+ * @dev: device for which we do this operation
+ *
+ * Return: This function returns the max voltage latency in nanoseconds.
+ *
+ * Locking: This function takes rcu_read_lock().
+ */
+unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
+{
+	struct device_opp *dev_opp;
+	struct dev_pm_opp *opp;
+	struct regulator *reg;
+	unsigned long latency_ns = 0;
+	unsigned long min_uV = ~0, max_uV = 0;
+	int ret;
+
+	rcu_read_lock();
+
+	dev_opp = _find_device_opp(dev);
+	if (IS_ERR(dev_opp)) {
+		rcu_read_unlock();
+		return 0;
+	}
+
+	reg = dev_opp->regulator;
+	if (IS_ERR_OR_NULL(reg)) {
+		/* Regulator may not be required for device */
+		if (reg)
+			dev_err(dev, "%s: Invalid regulator (%ld)\n", __func__,
+				PTR_ERR(reg));
+		rcu_read_unlock();
+		return 0;
+	}
+
+	list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) {
+		if (!opp->available)
+			continue;
+
+		if (opp->u_volt_min < min_uV)
+			min_uV = opp->u_volt_min;
+		if (opp->u_volt_max > max_uV)
+			max_uV = opp->u_volt_max;
+	}
+
+	rcu_read_unlock();
+
+	/*
+	 * The caller needs to ensure that dev_opp (and hence the regulator)
+	 * isn't freed, while we are executing this routine.
+	 */
+	ret = regulator_set_voltage_time(reg, min_uV, max_uV);
+	if (ret > 0)
+		latency_ns = ret * 1000;
+
+	return latency_ns;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_volt_latency);
+
+/**
  * dev_pm_opp_get_suspend_opp() - Get suspend opp
  * @dev:	device for which we do this operation
  *
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index c70a18ac9c8a..5daa43058ac1 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -34,6 +34,7 @@ bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp);
 
 int dev_pm_opp_get_opp_count(struct device *dev);
 unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev);
+unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev);
 struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev);
 
 struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
@@ -88,6 +89,11 @@ static inline unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev)
 	return 0;
 }
 
+static inline unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
+{
+	return 0;
+}
+
 static inline struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev)
 {
 	return NULL;
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 03/16] PM / OPP: Introduce dev_pm_opp_get_max_volt_latency()

[Viresh Kumar]

In few use cases (like: cpufreq), it is desired to get the maximum
voltage latency for changing OPPs. Add support for that.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/core.c | 59 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h        |  6 +++++
 2 files changed, 65 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 71545becfca1..ffe2406af882 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -231,6 +231,65 @@ unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev)
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_clock_latency);
 
 /**
+ * dev_pm_opp_get_max_volt_latency() - Get max voltage latency in nanoseconds
+ * @dev: device for which we do this operation
+ *
+ * Return: This function returns the max voltage latency in nanoseconds.
+ *
+ * Locking: This function takes rcu_read_lock().
+ */
+unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
+{
+	struct device_opp *dev_opp;
+	struct dev_pm_opp *opp;
+	struct regulator *reg;
+	unsigned long latency_ns = 0;
+	unsigned long min_uV = ~0, max_uV = 0;
+	int ret;
+
+	rcu_read_lock();
+
+	dev_opp = _find_device_opp(dev);
+	if (IS_ERR(dev_opp)) {
+		rcu_read_unlock();
+		return 0;
+	}
+
+	reg = dev_opp->regulator;
+	if (IS_ERR_OR_NULL(reg)) {
+		/* Regulator may not be required for device */
+		if (reg)
+			dev_err(dev, "%s: Invalid regulator (%ld)\n", __func__,
+				PTR_ERR(reg));
+		rcu_read_unlock();
+		return 0;
+	}
+
+	list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) {
+		if (!opp->available)
+			continue;
+
+		if (opp->u_volt_min < min_uV)
+			min_uV = opp->u_volt_min;
+		if (opp->u_volt_max > max_uV)
+			max_uV = opp->u_volt_max;
+	}
+
+	rcu_read_unlock();
+
+	/*
+	 * The caller needs to ensure that dev_opp (and hence the regulator)
+	 * isn't freed, while we are executing this routine.
+	 */
+	ret = regulator_set_voltage_time(reg, min_uV, max_uV);
+	if (ret > 0)
+		latency_ns = ret * 1000;
+
+	return latency_ns;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_volt_latency);
+
+/**
  * dev_pm_opp_get_suspend_opp() - Get suspend opp
  * @dev:	device for which we do this operation
  *
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index c70a18ac9c8a..5daa43058ac1 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -34,6 +34,7 @@ bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp);
 
 int dev_pm_opp_get_opp_count(struct device *dev);
 unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev);
+unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev);
 struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev);
 
 struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
@@ -88,6 +89,11 @@ static inline unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev)
 	return 0;
 }
 
+static inline unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
+{
+	return 0;
+}
+
 static inline struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev)
 {
 	return NULL;
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 04/16] PM / OPP: Introduce dev_pm_opp_get_max_transition_latency()

[Viresh Kumar]

In few use cases (like: cpufreq), it is desired to get the maximum
latency for changing OPPs. Add support for that.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/base/power/opp/core.c | 17 +++++++++++++++++
 include/linux/pm_opp.h        |  6 ++++++
 2 files changed, 23 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index ffe2406af882..b0f5c72f0fc3 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -290,6 +290,23 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_volt_latency);
 
 /**
+ * dev_pm_opp_get_max_transition_latency() - Get max transition latency in
+ *					     nanoseconds
+ * @dev: device for which we do this operation
+ *
+ * Return: This function returns the max transition latency, in nanoseconds, to
+ * switch from one OPP to other.
+ *
+ * Locking: This function takes rcu_read_lock().
+ */
+unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev)
+{
+	return dev_pm_opp_get_max_volt_latency(dev) +
+		dev_pm_opp_get_max_clock_latency(dev);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_transition_latency);
+
+/**
  * dev_pm_opp_get_suspend_opp() - Get suspend opp
  * @dev:	device for which we do this operation
  *
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 5daa43058ac1..59da3d9e11ea 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -35,6 +35,7 @@ bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp);
 int dev_pm_opp_get_opp_count(struct device *dev);
 unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev);
 unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev);
+unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev);
 struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev);
 
 struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
@@ -94,6 +95,11 @@ static inline unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
 	return 0;
 }
 
+static inline unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev)
+{
+	return 0;
+}
+
 static inline struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev)
 {
 	return NULL;
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 04/16] PM / OPP: Introduce dev_pm_opp_get_max_transition_latency()

[Viresh Kumar]

In few use cases (like: cpufreq), it is desired to get the maximum
latency for changing OPPs. Add support for that.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/base/power/opp/core.c | 17 +++++++++++++++++
 include/linux/pm_opp.h        |  6 ++++++
 2 files changed, 23 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index ffe2406af882..b0f5c72f0fc3 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -290,6 +290,23 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_volt_latency);
 
 /**
+ * dev_pm_opp_get_max_transition_latency() - Get max transition latency in
+ *					     nanoseconds
+ * @dev: device for which we do this operation
+ *
+ * Return: This function returns the max transition latency, in nanoseconds, to
+ * switch from one OPP to other.
+ *
+ * Locking: This function takes rcu_read_lock().
+ */
+unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev)
+{
+	return dev_pm_opp_get_max_volt_latency(dev) +
+		dev_pm_opp_get_max_clock_latency(dev);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_transition_latency);
+
+/**
  * dev_pm_opp_get_suspend_opp() - Get suspend opp
  * @dev:	device for which we do this operation
  *
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 5daa43058ac1..59da3d9e11ea 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -35,6 +35,7 @@ bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp);
 int dev_pm_opp_get_opp_count(struct device *dev);
 unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev);
 unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev);
+unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev);
 struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev);
 
 struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
@@ -94,6 +95,11 @@ static inline unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
 	return 0;
 }
 
+static inline unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev)
+{
+	return 0;
+}
+
 static inline struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev)
 {
 	return NULL;
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 05/16] PM / OPP: Parse clock-latency and voltage-tolerance for v1 bindings

[Viresh Kumar]

V2 bindings have better support for clock-latency and voltage-tolerance
and doesn't need special care. To use callbacks, like
dev_pm_opp_get_max_{transition|volt}_latency(), irrespective of the
bindings, the core needs to know clock-latency/voltage-tolerance for the
earlier bindings.

This patch reads clock-latency/voltage-tolerance from the device node,
irrespective of the bindings (to keep it simple) and use them only for
V1 bindings.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/base/power/opp/core.c | 20 ++++++++++++++++++++
 drivers/base/power/opp/opp.h  |  6 ++++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index b0f5c72f0fc3..4fafa733a1c7 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -582,6 +582,7 @@ static struct device_opp *_add_device_opp(struct device *dev)
 {
 	struct device_opp *dev_opp;
 	struct device_list_opp *list_dev;
+	struct device_node *np;
 
 	/* Check for existing list for 'dev' first */
 	dev_opp = _find_device_opp(dev);
@@ -604,6 +605,21 @@ static struct device_opp *_add_device_opp(struct device *dev)
 		return NULL;
 	}
 
+	/*
+	 * Only required for backward compatibility with v1 bindings, but isn't
+	 * harmful for other cases. And so we do it unconditionally.
+	 */
+	np = of_node_get(dev->of_node);
+	if (np) {
+		u32 val;
+
+		if (!of_property_read_u32(np, "clock-latency", &val))
+			dev_opp->clock_latency_ns_max = val;
+		of_property_read_u32(np, "voltage-tolerance",
+				     &dev_opp->voltage_tolerance_v1);
+		of_node_put(np);
+	}
+
 	srcu_init_notifier_head(&dev_opp->srcu_head);
 	INIT_LIST_HEAD(&dev_opp->opp_list);
 
@@ -861,6 +877,7 @@ static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
 {
 	struct device_opp *dev_opp;
 	struct dev_pm_opp *new_opp;
+	unsigned long tol;
 	int ret;
 
 	/* Hold our list modification lock here */
@@ -874,7 +891,10 @@ static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
 
 	/* populate the opp table */
 	new_opp->rate = freq;
+	tol = u_volt * dev_opp->voltage_tolerance_v1 / 100;
 	new_opp->u_volt = u_volt;
+	new_opp->u_volt_min = u_volt - tol;
+	new_opp->u_volt_max = u_volt + tol;
 	new_opp->available = true;
 	new_opp->dynamic = dynamic;
 
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index 416293b7da23..fe44beb404ba 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -138,6 +138,8 @@ struct device_list_opp {
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
  *
+ * @voltage_tolerance_v1: In percentage, for v1 bindings only.
+ *
  * This is an internal data structure maintaining the link to opps attached to
  * a device. This structure is not meant to be shared to users as it is
  * meant for book keeping and private to OPP library.
@@ -156,6 +158,10 @@ struct device_opp {
 
 	struct device_node *np;
 	unsigned long clock_latency_ns_max;
+
+	/* For backward compatibility with v1 bindings */
+	unsigned int voltage_tolerance_v1;
+
 	bool shared_opp;
 	struct dev_pm_opp *suspend_opp;
 
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 05/16] PM / OPP: Parse clock-latency and voltage-tolerance for v1 bindings

[Viresh Kumar]

V2 bindings have better support for clock-latency and voltage-tolerance
and doesn't need special care. To use callbacks, like
dev_pm_opp_get_max_{transition|volt}_latency(), irrespective of the
bindings, the core needs to know clock-latency/voltage-tolerance for the
earlier bindings.

This patch reads clock-latency/voltage-tolerance from the device node,
irrespective of the bindings (to keep it simple) and use them only for
V1 bindings.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/base/power/opp/core.c | 20 ++++++++++++++++++++
 drivers/base/power/opp/opp.h  |  6 ++++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index b0f5c72f0fc3..4fafa733a1c7 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -582,6 +582,7 @@ static struct device_opp *_add_device_opp(struct device *dev)
 {
 	struct device_opp *dev_opp;
 	struct device_list_opp *list_dev;
+	struct device_node *np;
 
 	/* Check for existing list for 'dev' first */
 	dev_opp = _find_device_opp(dev);
@@ -604,6 +605,21 @@ static struct device_opp *_add_device_opp(struct device *dev)
 		return NULL;
 	}
 
+	/*
+	 * Only required for backward compatibility with v1 bindings, but isn't
+	 * harmful for other cases. And so we do it unconditionally.
+	 */
+	np = of_node_get(dev->of_node);
+	if (np) {
+		u32 val;
+
+		if (!of_property_read_u32(np, "clock-latency", &val))
+			dev_opp->clock_latency_ns_max = val;
+		of_property_read_u32(np, "voltage-tolerance",
+				     &dev_opp->voltage_tolerance_v1);
+		of_node_put(np);
+	}
+
 	srcu_init_notifier_head(&dev_opp->srcu_head);
 	INIT_LIST_HEAD(&dev_opp->opp_list);
 
@@ -861,6 +877,7 @@ static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
 {
 	struct device_opp *dev_opp;
 	struct dev_pm_opp *new_opp;
+	unsigned long tol;
 	int ret;
 
 	/* Hold our list modification lock here */
@@ -874,7 +891,10 @@ static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
 
 	/* populate the opp table */
 	new_opp->rate = freq;
+	tol = u_volt * dev_opp->voltage_tolerance_v1 / 100;
 	new_opp->u_volt = u_volt;
+	new_opp->u_volt_min = u_volt - tol;
+	new_opp->u_volt_max = u_volt + tol;
 	new_opp->available = true;
 	new_opp->dynamic = dynamic;
 
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index 416293b7da23..fe44beb404ba 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -138,6 +138,8 @@ struct device_list_opp {
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
  *
+ * @voltage_tolerance_v1: In percentage, for v1 bindings only.
+ *
  * This is an internal data structure maintaining the link to opps attached to
  * a device. This structure is not meant to be shared to users as it is
  * meant for book keeping and private to OPP library.
@@ -156,6 +158,10 @@ struct device_opp {
 
 	struct device_node *np;
 	unsigned long clock_latency_ns_max;
+
+	/* For backward compatibility with v1 bindings */
+	unsigned int voltage_tolerance_v1;
+
 	bool shared_opp;
 	struct dev_pm_opp *suspend_opp;
 
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 06/16] PM / OPP: Manage device clk

[Viresh Kumar]

OPP core has got almost everything now to manage device's OPP
transitions, the only thing left is device's clk. Get that as well.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/base/power/opp/core.c | 15 +++++++++++++++
 drivers/base/power/opp/opp.h  |  3 +++
 2 files changed, 18 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 4fafa733a1c7..7d7749ce1ce4 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -13,6 +13,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/clk.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -583,6 +584,7 @@ static struct device_opp *_add_device_opp(struct device *dev)
 	struct device_opp *dev_opp;
 	struct device_list_opp *list_dev;
 	struct device_node *np;
+	int ret;
 
 	/* Check for existing list for 'dev' first */
 	dev_opp = _find_device_opp(dev);
@@ -620,6 +622,15 @@ static struct device_opp *_add_device_opp(struct device *dev)
 		of_node_put(np);
 	}
 
+	/* Find clk for the device */
+	dev_opp->clk = clk_get(dev, NULL);
+	if (IS_ERR(dev_opp->clk)) {
+		ret = PTR_ERR(dev_opp->clk);
+		if (ret != -EPROBE_DEFER)
+			dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__,
+				ret);
+	}
+
 	srcu_init_notifier_head(&dev_opp->srcu_head);
 	INIT_LIST_HEAD(&dev_opp->opp_list);
 
@@ -661,6 +672,10 @@ static void _remove_device_opp(struct device_opp *dev_opp)
 	if (!IS_ERR_OR_NULL(dev_opp->regulator))
 		return;
 
+	/* Release clk */
+	if (!IS_ERR(dev_opp->clk))
+		clk_put(dev_opp->clk);
+
 	list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp,
 				    node);
 
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index fe44beb404ba..4f1bdfc7da03 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -22,6 +22,7 @@
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
 
+struct clk;
 struct regulator;
 
 /* Lock to allow exclusive modification to the device and opp lists */
@@ -134,6 +135,7 @@ struct device_list_opp {
  * @supported_hw: Array of version number to support.
  * @supported_hw_count: Number of elements in supported_hw array.
  * @prop_name: A name to postfix to many DT properties, while parsing them.
+ * @clk: Device's clock handle
  * @regulator: Supply regulator
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
@@ -168,6 +170,7 @@ struct device_opp {
 	unsigned int *supported_hw;
 	unsigned int supported_hw_count;
 	const char *prop_name;
+	struct clk *clk;
 	struct regulator *regulator;
 
 #ifdef CONFIG_DEBUG_FS
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 06/16] PM / OPP: Manage device clk

[Viresh Kumar]

OPP core has got almost everything now to manage device's OPP
transitions, the only thing left is device's clk. Get that as well.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/base/power/opp/core.c | 15 +++++++++++++++
 drivers/base/power/opp/opp.h  |  3 +++
 2 files changed, 18 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 4fafa733a1c7..7d7749ce1ce4 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -13,6 +13,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/clk.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -583,6 +584,7 @@ static struct device_opp *_add_device_opp(struct device *dev)
 	struct device_opp *dev_opp;
 	struct device_list_opp *list_dev;
 	struct device_node *np;
+	int ret;
 
 	/* Check for existing list for 'dev' first */
 	dev_opp = _find_device_opp(dev);
@@ -620,6 +622,15 @@ static struct device_opp *_add_device_opp(struct device *dev)
 		of_node_put(np);
 	}
 
+	/* Find clk for the device */
+	dev_opp->clk = clk_get(dev, NULL);
+	if (IS_ERR(dev_opp->clk)) {
+		ret = PTR_ERR(dev_opp->clk);
+		if (ret != -EPROBE_DEFER)
+			dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__,
+				ret);
+	}
+
 	srcu_init_notifier_head(&dev_opp->srcu_head);
 	INIT_LIST_HEAD(&dev_opp->opp_list);
 
@@ -661,6 +672,10 @@ static void _remove_device_opp(struct device_opp *dev_opp)
 	if (!IS_ERR_OR_NULL(dev_opp->regulator))
 		return;
 
+	/* Release clk */
+	if (!IS_ERR(dev_opp->clk))
+		clk_put(dev_opp->clk);
+
 	list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp,
 				    node);
 
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index fe44beb404ba..4f1bdfc7da03 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -22,6 +22,7 @@
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
 
+struct clk;
 struct regulator;
 
 /* Lock to allow exclusive modification to the device and opp lists */
@@ -134,6 +135,7 @@ struct device_list_opp {
  * @supported_hw: Array of version number to support.
  * @supported_hw_count: Number of elements in supported_hw array.
  * @prop_name: A name to postfix to many DT properties, while parsing them.
+ * @clk: Device's clock handle
  * @regulator: Supply regulator
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
@@ -168,6 +170,7 @@ struct device_opp {
 	unsigned int *supported_hw;
 	unsigned int supported_hw_count;
 	const char *prop_name;
+	struct clk *clk;
 	struct regulator *regulator;
 
 #ifdef CONFIG_DEBUG_FS
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 07/16] PM / OPP: Add dev_pm_opp_set_rate()

[Viresh Kumar]

This adds a routine, dev_pm_opp_set_rate(), responsible for configuring
power-supply and clock source for an OPP.

The OPP is found by matching against the target_freq passed to the
routine. This shall replace similar code present in most of the OPP
users and help simplify them a lot.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/core.c | 176 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h        |   6 ++
 2 files changed, 182 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 7d7749ce1ce4..ab711c2c3e00 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -529,6 +529,182 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
 
+/*
+ * The caller needs to ensure that device_opp (and hence the clk) isn't freed,
+ * while clk returned here is used.
+ */
+static struct clk *_get_opp_clk(struct device *dev)
+{
+	struct device_opp *dev_opp;
+	struct clk *clk;
+
+	rcu_read_lock();
+
+	dev_opp = _find_device_opp(dev);
+	if (IS_ERR(dev_opp)) {
+		dev_err(dev, "%s: device opp doesn't exist\n", __func__);
+		clk = ERR_CAST(dev_opp);
+		goto unlock;
+	}
+
+	clk = dev_opp->clk;
+	if (IS_ERR(clk))
+		dev_err(dev, "%s: No clock available for the device\n",
+			__func__);
+
+unlock:
+	rcu_read_unlock();
+	return clk;
+}
+
+static int _set_opp_voltage(struct device *dev, struct regulator *reg,
+			    unsigned long u_volt, unsigned long u_volt_min,
+			    unsigned long u_volt_max)
+{
+	int ret;
+
+	/* Regulator not available for device */
+	if (IS_ERR(reg)) {
+		dev_dbg(dev, "%s: regulator not available: %ld\n", __func__,
+			PTR_ERR(reg));
+		return 0;
+	}
+
+	dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, u_volt_min,
+		u_volt, u_volt_max);
+
+	ret = regulator_set_voltage_triplet(reg, u_volt_min, u_volt,
+					    u_volt_max);
+	if (ret)
+		dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n",
+			__func__, u_volt_min, u_volt, u_volt_max, ret);
+
+	return ret;
+}
+
+/**
+ * dev_pm_opp_set_rate() - Configure new OPP based on frequency
+ * @dev:	 device for which we do this operation
+ * @target_freq: frequency to achieve
+ *
+ * This configures the power-supplies and clock source to the levels specified
+ * by the OPP corresponding to the target_freq.
+ *
+ * Locking: This function takes rcu_read_lock().
+ */
+int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+{
+	struct device_opp *dev_opp;
+	struct dev_pm_opp *old_opp, *opp;
+	struct regulator *reg;
+	struct clk *clk;
+	unsigned long freq, old_freq;
+	unsigned long u_volt, u_volt_min, u_volt_max;
+	unsigned long ou_volt, ou_volt_min, ou_volt_max;
+	int ret;
+
+	if (unlikely(!target_freq)) {
+		dev_err(dev, "%s: Invalid target frequency %lu\n", __func__,
+			target_freq);
+		return -EINVAL;
+	}
+
+	clk = _get_opp_clk(dev);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	freq = clk_round_rate(clk, target_freq);
+	if ((long)freq <= 0)
+		freq = target_freq;
+
+	old_freq = clk_get_rate(clk);
+
+	/* Return early if nothing to do */
+	if (old_freq == freq) {
+		dev_dbg(dev, "%s: old/new frequencies (%lu Hz) are same, nothing to do\n",
+			__func__, freq);
+		return 0;
+	}
+
+	rcu_read_lock();
+
+	dev_opp = _find_device_opp(dev);
+	if (IS_ERR(dev_opp)) {
+		dev_err(dev, "%s: device opp doesn't exist\n", __func__);
+		rcu_read_unlock();
+		return PTR_ERR(dev_opp);
+	}
+
+	old_opp = dev_pm_opp_find_freq_ceil(dev, &old_freq);
+	if (!IS_ERR(old_opp)) {
+		ou_volt = old_opp->u_volt;
+		ou_volt_min = old_opp->u_volt_min;
+		ou_volt_max = old_opp->u_volt_max;
+	} else {
+		dev_err(dev, "%s: failed to find current OPP for freq %lu (%ld)\n",
+			__func__, old_freq, PTR_ERR(old_opp));
+	}
+
+	opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+	if (IS_ERR(opp)) {
+		ret = PTR_ERR(opp);
+		dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n",
+			__func__, freq, ret);
+		rcu_read_unlock();
+		return ret;
+	}
+
+	u_volt = opp->u_volt;
+	u_volt_min = opp->u_volt_min;
+	u_volt_max = opp->u_volt_max;
+
+	reg = dev_opp->regulator;
+
+	rcu_read_unlock();
+
+	/* Scaling up? Scale voltage before frequency */
+	if (freq > old_freq) {
+		ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
+				       u_volt_max);
+		if (ret)
+			goto restore_voltage;
+	}
+
+	/* Change frequency */
+
+	dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n",
+		__func__, old_freq, freq);
+
+	ret = clk_set_rate(clk, freq);
+	if (ret) {
+		dev_err(dev, "%s: failed to set clock rate: %d\n", __func__,
+			ret);
+		goto restore_voltage;
+	}
+
+	/* Scaling down? Scale voltage after frequency */
+	if (freq < old_freq) {
+		ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
+				       u_volt_max);
+		if (ret)
+			goto restore_freq;
+	}
+
+	return 0;
+
+restore_freq:
+	if (clk_set_rate(clk, old_freq))
+		dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n",
+			__func__, old_freq);
+restore_voltage:
+	/* This shouldn't harm even if the voltages weren't updated earlier */
+	if (!IS_ERR(old_opp))
+		_set_opp_voltage(dev, reg, ou_volt, ou_volt_min, ou_volt_max);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_rate);
+
 /* List-dev Helpers */
 static void _kfree_list_dev_rcu(struct rcu_head *head)
 {
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 59da3d9e11ea..cccaf4a29e9f 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -64,6 +64,7 @@ int dev_pm_opp_set_prop_name(struct device *dev, const char *name);
 void dev_pm_opp_put_prop_name(struct device *dev);
 int dev_pm_opp_set_regulator(struct device *dev, const char *name);
 void dev_pm_opp_put_regulator(struct device *dev);
+int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
 #else
 static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 {
@@ -172,6 +173,11 @@ static inline int dev_pm_opp_set_regulator(struct device *dev, const char *name)
 
 static inline void dev_pm_opp_put_regulator(struct device *dev) {}
 
+static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+{
+	return -EINVAL;
+}
+
 #endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 07/16] PM / OPP: Add dev_pm_opp_set_rate()

[Viresh Kumar]

This adds a routine, dev_pm_opp_set_rate(), responsible for configuring
power-supply and clock source for an OPP.

The OPP is found by matching against the target_freq passed to the
routine. This shall replace similar code present in most of the OPP
users and help simplify them a lot.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/core.c | 176 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h        |   6 ++
 2 files changed, 182 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 7d7749ce1ce4..ab711c2c3e00 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -529,6 +529,182 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
 
+/*
+ * The caller needs to ensure that device_opp (and hence the clk) isn't freed,
+ * while clk returned here is used.
+ */
+static struct clk *_get_opp_clk(struct device *dev)
+{
+	struct device_opp *dev_opp;
+	struct clk *clk;
+
+	rcu_read_lock();
+
+	dev_opp = _find_device_opp(dev);
+	if (IS_ERR(dev_opp)) {
+		dev_err(dev, "%s: device opp doesn't exist\n", __func__);
+		clk = ERR_CAST(dev_opp);
+		goto unlock;
+	}
+
+	clk = dev_opp->clk;
+	if (IS_ERR(clk))
+		dev_err(dev, "%s: No clock available for the device\n",
+			__func__);
+
+unlock:
+	rcu_read_unlock();
+	return clk;
+}
+
+static int _set_opp_voltage(struct device *dev, struct regulator *reg,
+			    unsigned long u_volt, unsigned long u_volt_min,
+			    unsigned long u_volt_max)
+{
+	int ret;
+
+	/* Regulator not available for device */
+	if (IS_ERR(reg)) {
+		dev_dbg(dev, "%s: regulator not available: %ld\n", __func__,
+			PTR_ERR(reg));
+		return 0;
+	}
+
+	dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, u_volt_min,
+		u_volt, u_volt_max);
+
+	ret = regulator_set_voltage_triplet(reg, u_volt_min, u_volt,
+					    u_volt_max);
+	if (ret)
+		dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n",
+			__func__, u_volt_min, u_volt, u_volt_max, ret);
+
+	return ret;
+}
+
+/**
+ * dev_pm_opp_set_rate() - Configure new OPP based on frequency
+ * @dev:	 device for which we do this operation
+ * @target_freq: frequency to achieve
+ *
+ * This configures the power-supplies and clock source to the levels specified
+ * by the OPP corresponding to the target_freq.
+ *
+ * Locking: This function takes rcu_read_lock().
+ */
+int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+{
+	struct device_opp *dev_opp;
+	struct dev_pm_opp *old_opp, *opp;
+	struct regulator *reg;
+	struct clk *clk;
+	unsigned long freq, old_freq;
+	unsigned long u_volt, u_volt_min, u_volt_max;
+	unsigned long ou_volt, ou_volt_min, ou_volt_max;
+	int ret;
+
+	if (unlikely(!target_freq)) {
+		dev_err(dev, "%s: Invalid target frequency %lu\n", __func__,
+			target_freq);
+		return -EINVAL;
+	}
+
+	clk = _get_opp_clk(dev);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	freq = clk_round_rate(clk, target_freq);
+	if ((long)freq <= 0)
+		freq = target_freq;
+
+	old_freq = clk_get_rate(clk);
+
+	/* Return early if nothing to do */
+	if (old_freq == freq) {
+		dev_dbg(dev, "%s: old/new frequencies (%lu Hz) are same, nothing to do\n",
+			__func__, freq);
+		return 0;
+	}
+
+	rcu_read_lock();
+
+	dev_opp = _find_device_opp(dev);
+	if (IS_ERR(dev_opp)) {
+		dev_err(dev, "%s: device opp doesn't exist\n", __func__);
+		rcu_read_unlock();
+		return PTR_ERR(dev_opp);
+	}
+
+	old_opp = dev_pm_opp_find_freq_ceil(dev, &old_freq);
+	if (!IS_ERR(old_opp)) {
+		ou_volt = old_opp->u_volt;
+		ou_volt_min = old_opp->u_volt_min;
+		ou_volt_max = old_opp->u_volt_max;
+	} else {
+		dev_err(dev, "%s: failed to find current OPP for freq %lu (%ld)\n",
+			__func__, old_freq, PTR_ERR(old_opp));
+	}
+
+	opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+	if (IS_ERR(opp)) {
+		ret = PTR_ERR(opp);
+		dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n",
+			__func__, freq, ret);
+		rcu_read_unlock();
+		return ret;
+	}
+
+	u_volt = opp->u_volt;
+	u_volt_min = opp->u_volt_min;
+	u_volt_max = opp->u_volt_max;
+
+	reg = dev_opp->regulator;
+
+	rcu_read_unlock();
+
+	/* Scaling up? Scale voltage before frequency */
+	if (freq > old_freq) {
+		ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
+				       u_volt_max);
+		if (ret)
+			goto restore_voltage;
+	}
+
+	/* Change frequency */
+
+	dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n",
+		__func__, old_freq, freq);
+
+	ret = clk_set_rate(clk, freq);
+	if (ret) {
+		dev_err(dev, "%s: failed to set clock rate: %d\n", __func__,
+			ret);
+		goto restore_voltage;
+	}
+
+	/* Scaling down? Scale voltage after frequency */
+	if (freq < old_freq) {
+		ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
+				       u_volt_max);
+		if (ret)
+			goto restore_freq;
+	}
+
+	return 0;
+
+restore_freq:
+	if (clk_set_rate(clk, old_freq))
+		dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n",
+			__func__, old_freq);
+restore_voltage:
+	/* This shouldn't harm even if the voltages weren't updated earlier */
+	if (!IS_ERR(old_opp))
+		_set_opp_voltage(dev, reg, ou_volt, ou_volt_min, ou_volt_max);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_rate);
+
 /* List-dev Helpers */
 static void _kfree_list_dev_rcu(struct rcu_head *head)
 {
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 59da3d9e11ea..cccaf4a29e9f 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -64,6 +64,7 @@ int dev_pm_opp_set_prop_name(struct device *dev, const char *name);
 void dev_pm_opp_put_prop_name(struct device *dev);
 int dev_pm_opp_set_regulator(struct device *dev, const char *name);
 void dev_pm_opp_put_regulator(struct device *dev);
+int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
 #else
 static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 {
@@ -172,6 +173,11 @@ static inline int dev_pm_opp_set_regulator(struct device *dev, const char *name)
 
 static inline void dev_pm_opp_put_regulator(struct device *dev) {}
 
+static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+{
+	return -EINVAL;
+}
+
 #endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 08/16] cpufreq: dt: Convert few pr_debug/err() calls to dev_dbg/err()

[Viresh Kumar]

We have the device structure available now, lets use it for better print
messages.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 0ca74d070058..ace0168274d4 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -246,7 +246,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	 */
 	ret = dev_pm_opp_get_opp_count(cpu_dev);
 	if (ret <= 0) {
-		pr_debug("OPP table is not ready, deferring probe\n");
+		dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");
 		ret = -EPROBE_DEFER;
 		goto out_free_opp;
 	}
@@ -325,7 +325,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
-		pr_err("failed to init cpufreq table: %d\n", ret);
+		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
 		goto out_free_priv;
 	}
 
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 08/16] cpufreq: dt: Convert few pr_debug/err() calls to dev_dbg/err()

[Viresh Kumar]

We have the device structure available now, lets use it for better print
messages.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 0ca74d070058..ace0168274d4 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -246,7 +246,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	 */
 	ret = dev_pm_opp_get_opp_count(cpu_dev);
 	if (ret <= 0) {
-		pr_debug("OPP table is not ready, deferring probe\n");
+		dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");
 		ret = -EPROBE_DEFER;
 		goto out_free_opp;
 	}
@@ -325,7 +325,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
-		pr_err("failed to init cpufreq table: %d\n", ret);
+		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
 		goto out_free_priv;
 	}
 
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 09/16] cpufreq: dt: Rename 'need_update' to 'opp_v1'

[Viresh Kumar]

That's the real purpose of this field, i.e. to take special care of old
OPP V1 bindings. Lets name it accordingly, so that it can be used
elsewhere.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index ace0168274d4..0047d20803db 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -199,7 +199,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	struct dev_pm_opp *suspend_opp;
 	unsigned long min_uV = ~0, max_uV = 0;
 	unsigned int transition_latency;
-	bool need_update = false;
+	bool opp_v1 = false;
 	int ret;
 
 	ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
@@ -223,7 +223,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		 * finding shared-OPPs for backward compatibility.
 		 */
 		if (ret == -ENOENT)
-			need_update = true;
+			opp_v1 = true;
 		else
 			goto out_node_put;
 	}
@@ -251,7 +251,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		goto out_free_opp;
 	}
 
-	if (need_update) {
+	if (opp_v1) {
 		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
 
 		if (!pd || !pd->independent_clocks)
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 09/16] cpufreq: dt: Rename 'need_update' to 'opp_v1'

[Viresh Kumar]

That's the real purpose of this field, i.e. to take special care of old
OPP V1 bindings. Lets name it accordingly, so that it can be used
elsewhere.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index ace0168274d4..0047d20803db 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -199,7 +199,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	struct dev_pm_opp *suspend_opp;
 	unsigned long min_uV = ~0, max_uV = 0;
 	unsigned int transition_latency;
-	bool need_update = false;
+	bool opp_v1 = false;
 	int ret;
 
 	ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
@@ -223,7 +223,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		 * finding shared-OPPs for backward compatibility.
 		 */
 		if (ret == -ENOENT)
-			need_update = true;
+			opp_v1 = true;
 		else
 			goto out_node_put;
 	}
@@ -251,7 +251,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		goto out_free_opp;
 	}
 
-	if (need_update) {
+	if (opp_v1) {
 		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
 
 		if (!pd || !pd->independent_clocks)
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 10/16] cpufreq: dt: OPP layers handles clock-latency for V1 bindings as well

[Viresh Kumar]

"clock-latency" is handled by OPP layer for all bindings and so there is
no need to make special calls for V1 bindings. Use
dev_pm_opp_get_max_clock_latency() for both the cases.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 0047d20803db..4c9f8a828f6f 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -265,10 +265,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		if (ret)
 			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
 				__func__, ret);
-
-		of_property_read_u32(np, "clock-latency", &transition_latency);
-	} else {
-		transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev);
 	}
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -279,6 +275,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 
 	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
 
+	transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev);
 	if (!transition_latency)
 		transition_latency = CPUFREQ_ETERNAL;
 
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 10/16] cpufreq: dt: OPP layers handles clock-latency for V1 bindings as well

[Viresh Kumar]

"clock-latency" is handled by OPP layer for all bindings and so there is
no need to make special calls for V1 bindings. Use
dev_pm_opp_get_max_clock_latency() for both the cases.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 0047d20803db..4c9f8a828f6f 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -265,10 +265,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		if (ret)
 			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
 				__func__, ret);
-
-		of_property_read_u32(np, "clock-latency", &transition_latency);
-	} else {
-		transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev);
 	}
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -279,6 +275,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 
 	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
 
+	transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev);
 	if (!transition_latency)
 		transition_latency = CPUFREQ_ETERNAL;
 
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core

[Viresh Kumar]

OPP core can handle the regulators by itself, and but it needs to know
the name of the regulator to fetch. Add support for that.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 4c9f8a828f6f..2af75f8088bb 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -34,6 +34,7 @@ struct private_data {
 	struct regulator *cpu_reg;
 	struct thermal_cooling_device *cdev;
 	unsigned int voltage_tolerance; /* in percentage */
+	const char *reg_name;
 };
 
 static struct freq_attr *cpufreq_dt_attr[] = {
@@ -119,6 +120,30 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
 	return ret;
 }
 
+/*
+ * An earlier version of opp-v1 bindings used to name the regulator
+ * "cpu0-supply", we still need to handle that for backwards compatibility.
+ */
+static const char *find_supply_name(struct device *dev, struct device_node *np)
+{
+	struct property *pp;
+	int cpu = dev->id;
+
+	/* Try "cpu0" for older DTs */
+	if (!cpu) {
+		pp = of_find_property(np, "cpu0-supply", NULL);
+		if (pp)
+			return "cpu0";
+	}
+
+	pp = of_find_property(np, "cpu-supply", NULL);
+	if (pp)
+		return "cpu";
+
+	dev_dbg(dev, "no regulator for cpu%d\n", cpu);
+	return NULL;
+}
+
 static int allocate_resources(int cpu, struct device **cdev,
 			      struct regulator **creg, struct clk **cclk)
 {
@@ -200,6 +225,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	unsigned long min_uV = ~0, max_uV = 0;
 	unsigned int transition_latency;
 	bool opp_v1 = false;
+	const char *name;
 	int ret;
 
 	ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
@@ -229,6 +255,20 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	/*
+	 * OPP layer will be taking care of regulators now, but it needs to know
+	 * the name of the regulator first.
+	 */
+	name = find_supply_name(cpu_dev, np);
+	if (name) {
+		ret = dev_pm_opp_set_regulator(cpu_dev, name);
+		if (ret) {
+			dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
+				policy->cpu, ret);
+			goto out_node_put;
+		}
+	}
+
+	/*
 	 * Initialize OPP tables for all policy->cpus. They will be shared by
 	 * all CPUs which have marked their CPUs shared with OPP bindings.
 	 *
@@ -273,6 +313,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		goto out_free_opp;
 	}
 
+	priv->reg_name = name;
 	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
 
 	transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev);
@@ -366,6 +407,8 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	kfree(priv);
 out_free_opp:
 	dev_pm_opp_of_cpumask_remove_table(policy->cpus);
+	if (name)
+		dev_pm_opp_put_regulator(cpu_dev);
 out_node_put:
 	of_node_put(np);
 out_put_reg_clk:
@@ -383,6 +426,9 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
+	if (priv->reg_name)
+		dev_pm_opp_put_regulator(priv->cpu_dev);
+
 	clk_put(policy->clk);
 	if (!IS_ERR(priv->cpu_reg))
 		regulator_put(priv->cpu_reg);
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core

[Viresh Kumar]

OPP core can handle the regulators by itself, and but it needs to know
the name of the regulator to fetch. Add support for that.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 4c9f8a828f6f..2af75f8088bb 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -34,6 +34,7 @@ struct private_data {
 	struct regulator *cpu_reg;
 	struct thermal_cooling_device *cdev;
 	unsigned int voltage_tolerance; /* in percentage */
+	const char *reg_name;
 };
 
 static struct freq_attr *cpufreq_dt_attr[] = {
@@ -119,6 +120,30 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
 	return ret;
 }
 
+/*
+ * An earlier version of opp-v1 bindings used to name the regulator
+ * "cpu0-supply", we still need to handle that for backwards compatibility.
+ */
+static const char *find_supply_name(struct device *dev, struct device_node *np)
+{
+	struct property *pp;
+	int cpu = dev->id;
+
+	/* Try "cpu0" for older DTs */
+	if (!cpu) {
+		pp = of_find_property(np, "cpu0-supply", NULL);
+		if (pp)
+			return "cpu0";
+	}
+
+	pp = of_find_property(np, "cpu-supply", NULL);
+	if (pp)
+		return "cpu";
+
+	dev_dbg(dev, "no regulator for cpu%d\n", cpu);
+	return NULL;
+}
+
 static int allocate_resources(int cpu, struct device **cdev,
 			      struct regulator **creg, struct clk **cclk)
 {
@@ -200,6 +225,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	unsigned long min_uV = ~0, max_uV = 0;
 	unsigned int transition_latency;
 	bool opp_v1 = false;
+	const char *name;
 	int ret;
 
 	ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
@@ -229,6 +255,20 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	/*
+	 * OPP layer will be taking care of regulators now, but it needs to know
+	 * the name of the regulator first.
+	 */
+	name = find_supply_name(cpu_dev, np);
+	if (name) {
+		ret = dev_pm_opp_set_regulator(cpu_dev, name);
+		if (ret) {
+			dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
+				policy->cpu, ret);
+			goto out_node_put;
+		}
+	}
+
+	/*
 	 * Initialize OPP tables for all policy->cpus. They will be shared by
 	 * all CPUs which have marked their CPUs shared with OPP bindings.
 	 *
@@ -273,6 +313,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		goto out_free_opp;
 	}
 
+	priv->reg_name = name;
 	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
 
 	transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev);
@@ -366,6 +407,8 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	kfree(priv);
 out_free_opp:
 	dev_pm_opp_of_cpumask_remove_table(policy->cpus);
+	if (name)
+		dev_pm_opp_put_regulator(cpu_dev);
 out_node_put:
 	of_node_put(np);
 out_put_reg_clk:
@@ -383,6 +426,9 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
+	if (priv->reg_name)
+		dev_pm_opp_put_regulator(priv->cpu_dev);
+
 	clk_put(policy->clk);
 	if (!IS_ERR(priv->cpu_reg))
 		regulator_put(priv->cpu_reg);
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 12/16] cpufreq: dt: Unsupported OPPs are already disabled

[Viresh Kumar]

The core already have a valid regulator set for the device opp and the
unsupported OPPs are already disabled by the core. There is no need to
repeat that in the user drivers, get rid of it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 2af75f8088bb..c3fe89461ff4 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -349,8 +349,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 					min_uV = opp_uV;
 				if (opp_uV > max_uV)
 					max_uV = opp_uV;
-			} else {
-				dev_pm_opp_disable(cpu_dev, opp_freq);
 			}
 
 			opp_freq++;
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 12/16] cpufreq: dt: Unsupported OPPs are already disabled

[Viresh Kumar]

The core already have a valid regulator set for the device opp and the
unsupported OPPs are already disabled by the core. There is no need to
repeat that in the user drivers, get rid of it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 2af75f8088bb..c3fe89461ff4 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -349,8 +349,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 					min_uV = opp_uV;
 				if (opp_uV > max_uV)
 					max_uV = opp_uV;
-			} else {
-				dev_pm_opp_disable(cpu_dev, opp_freq);
 			}
 
 			opp_freq++;
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 13/16] cpufreq: dt: Reuse dev_pm_opp_get_max_transition_latency()

[Viresh Kumar]

OPP layer has all the information now to calculate transition latency
(clock_latency + voltage_latency). Lets reuse the OPP layer helper
dev_pm_opp_get_max_transition_latency() instead of open coding the same
in cpufreq-dt driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 48 ++++----------------------------------------
 1 file changed, 4 insertions(+), 44 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index c3fe89461ff4..6f80ce56b4ec 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -222,7 +222,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	struct regulator *cpu_reg;
 	struct clk *cpu_clk;
 	struct dev_pm_opp *suspend_opp;
-	unsigned long min_uV = ~0, max_uV = 0;
 	unsigned int transition_latency;
 	bool opp_v1 = false;
 	const char *name;
@@ -316,49 +315,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	priv->reg_name = name;
 	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
 
-	transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev);
-	if (!transition_latency)
-		transition_latency = CPUFREQ_ETERNAL;
-
-	if (!IS_ERR(cpu_reg)) {
-		unsigned long opp_freq = 0;
-
-		/*
-		 * Disable any OPPs where the connected regulator isn't able to
-		 * provide the specified voltage and record minimum and maximum
-		 * voltage levels.
-		 */
-		while (1) {
-			struct dev_pm_opp *opp;
-			unsigned long opp_uV, tol_uV;
-
-			rcu_read_lock();
-			opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq);
-			if (IS_ERR(opp)) {
-				rcu_read_unlock();
-				break;
-			}
-			opp_uV = dev_pm_opp_get_voltage(opp);
-			rcu_read_unlock();
-
-			tol_uV = opp_uV * priv->voltage_tolerance / 100;
-			if (regulator_is_supported_voltage(cpu_reg,
-							   opp_uV - tol_uV,
-							   opp_uV + tol_uV)) {
-				if (opp_uV < min_uV)
-					min_uV = opp_uV;
-				if (opp_uV > max_uV)
-					max_uV = opp_uV;
-			}
-
-			opp_freq++;
-		}
-
-		ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
-		if (ret > 0)
-			transition_latency += ret * 1000;
-	}
-
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
 		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
@@ -393,6 +349,10 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs;
 	}
 
+	transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev);
+	if (!transition_latency)
+		transition_latency = CPUFREQ_ETERNAL;
+
 	policy->cpuinfo.transition_latency = transition_latency;
 
 	of_node_put(np);
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 13/16] cpufreq: dt: Reuse dev_pm_opp_get_max_transition_latency()

[Viresh Kumar]

OPP layer has all the information now to calculate transition latency
(clock_latency + voltage_latency). Lets reuse the OPP layer helper
dev_pm_opp_get_max_transition_latency() instead of open coding the same
in cpufreq-dt driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 48 ++++----------------------------------------
 1 file changed, 4 insertions(+), 44 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index c3fe89461ff4..6f80ce56b4ec 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -222,7 +222,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	struct regulator *cpu_reg;
 	struct clk *cpu_clk;
 	struct dev_pm_opp *suspend_opp;
-	unsigned long min_uV = ~0, max_uV = 0;
 	unsigned int transition_latency;
 	bool opp_v1 = false;
 	const char *name;
@@ -316,49 +315,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	priv->reg_name = name;
 	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
 
-	transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev);
-	if (!transition_latency)
-		transition_latency = CPUFREQ_ETERNAL;
-
-	if (!IS_ERR(cpu_reg)) {
-		unsigned long opp_freq = 0;
-
-		/*
-		 * Disable any OPPs where the connected regulator isn't able to
-		 * provide the specified voltage and record minimum and maximum
-		 * voltage levels.
-		 */
-		while (1) {
-			struct dev_pm_opp *opp;
-			unsigned long opp_uV, tol_uV;
-
-			rcu_read_lock();
-			opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq);
-			if (IS_ERR(opp)) {
-				rcu_read_unlock();
-				break;
-			}
-			opp_uV = dev_pm_opp_get_voltage(opp);
-			rcu_read_unlock();
-
-			tol_uV = opp_uV * priv->voltage_tolerance / 100;
-			if (regulator_is_supported_voltage(cpu_reg,
-							   opp_uV - tol_uV,
-							   opp_uV + tol_uV)) {
-				if (opp_uV < min_uV)
-					min_uV = opp_uV;
-				if (opp_uV > max_uV)
-					max_uV = opp_uV;
-			}
-
-			opp_freq++;
-		}
-
-		ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
-		if (ret > 0)
-			transition_latency += ret * 1000;
-	}
-
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
 		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
@@ -393,6 +349,10 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs;
 	}
 
+	transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev);
+	if (!transition_latency)
+		transition_latency = CPUFREQ_ETERNAL;
+
 	policy->cpuinfo.transition_latency = transition_latency;
 
 	of_node_put(np);
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 14/16] cpufreq: dt: Use dev_pm_opp_set_rate() to switch frequency

[Viresh Kumar]

OPP core supports frequency/voltage changes based on the target
frequency now, use that instead of open coding the same in cpufreq-dt
driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 73 ++------------------------------------------
 1 file changed, 2 insertions(+), 71 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 6f80ce56b4ec..150a172c7d0a 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -45,79 +45,10 @@ static struct freq_attr *cpufreq_dt_attr[] = {
 
 static int set_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	struct dev_pm_opp *opp;
-	struct cpufreq_frequency_table *freq_table = policy->freq_table;
-	struct clk *cpu_clk = policy->clk;
 	struct private_data *priv = policy->driver_data;
-	struct device *cpu_dev = priv->cpu_dev;
-	struct regulator *cpu_reg = priv->cpu_reg;
-	unsigned long volt = 0, tol = 0;
-	int volt_old = 0;
-	unsigned int old_freq, new_freq;
-	long freq_Hz, freq_exact;
-	int ret;
-
-	freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
-	if (freq_Hz <= 0)
-		freq_Hz = freq_table[index].frequency * 1000;
-
-	freq_exact = freq_Hz;
-	new_freq = freq_Hz / 1000;
-	old_freq = clk_get_rate(cpu_clk) / 1000;
-
-	if (!IS_ERR(cpu_reg)) {
-		unsigned long opp_freq;
-
-		rcu_read_lock();
-		opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
-		if (IS_ERR(opp)) {
-			rcu_read_unlock();
-			dev_err(cpu_dev, "failed to find OPP for %ld\n",
-				freq_Hz);
-			return PTR_ERR(opp);
-		}
-		volt = dev_pm_opp_get_voltage(opp);
-		opp_freq = dev_pm_opp_get_freq(opp);
-		rcu_read_unlock();
-		tol = volt * priv->voltage_tolerance / 100;
-		volt_old = regulator_get_voltage(cpu_reg);
-		dev_dbg(cpu_dev, "Found OPP: %ld kHz, %ld uV\n",
-			opp_freq / 1000, volt);
-	}
-
-	dev_dbg(cpu_dev, "%u MHz, %d mV --> %u MHz, %ld mV\n",
-		old_freq / 1000, (volt_old > 0) ? volt_old / 1000 : -1,
-		new_freq / 1000, volt ? volt / 1000 : -1);
-
-	/* scaling up?  scale voltage before frequency */
-	if (!IS_ERR(cpu_reg) && new_freq > old_freq) {
-		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
-		if (ret) {
-			dev_err(cpu_dev, "failed to scale voltage up: %d\n",
-				ret);
-			return ret;
-		}
-	}
-
-	ret = clk_set_rate(cpu_clk, freq_exact);
-	if (ret) {
-		dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
-		if (!IS_ERR(cpu_reg) && volt_old > 0)
-			regulator_set_voltage_tol(cpu_reg, volt_old, tol);
-		return ret;
-	}
 
-	/* scaling down?  scale voltage after frequency */
-	if (!IS_ERR(cpu_reg) && new_freq < old_freq) {
-		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
-		if (ret) {
-			dev_err(cpu_dev, "failed to scale voltage down: %d\n",
-				ret);
-			clk_set_rate(cpu_clk, old_freq * 1000);
-		}
-	}
-
-	return ret;
+	return dev_pm_opp_set_rate(priv->cpu_dev,
+				   policy->freq_table[index].frequency * 1000);
 }
 
 /*
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 14/16] cpufreq: dt: Use dev_pm_opp_set_rate() to switch frequency

[Viresh Kumar]

OPP core supports frequency/voltage changes based on the target
frequency now, use that instead of open coding the same in cpufreq-dt
driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 73 ++------------------------------------------
 1 file changed, 2 insertions(+), 71 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 6f80ce56b4ec..150a172c7d0a 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -45,79 +45,10 @@ static struct freq_attr *cpufreq_dt_attr[] = {
 
 static int set_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	struct dev_pm_opp *opp;
-	struct cpufreq_frequency_table *freq_table = policy->freq_table;
-	struct clk *cpu_clk = policy->clk;
 	struct private_data *priv = policy->driver_data;
-	struct device *cpu_dev = priv->cpu_dev;
-	struct regulator *cpu_reg = priv->cpu_reg;
-	unsigned long volt = 0, tol = 0;
-	int volt_old = 0;
-	unsigned int old_freq, new_freq;
-	long freq_Hz, freq_exact;
-	int ret;
-
-	freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
-	if (freq_Hz <= 0)
-		freq_Hz = freq_table[index].frequency * 1000;
-
-	freq_exact = freq_Hz;
-	new_freq = freq_Hz / 1000;
-	old_freq = clk_get_rate(cpu_clk) / 1000;
-
-	if (!IS_ERR(cpu_reg)) {
-		unsigned long opp_freq;
-
-		rcu_read_lock();
-		opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
-		if (IS_ERR(opp)) {
-			rcu_read_unlock();
-			dev_err(cpu_dev, "failed to find OPP for %ld\n",
-				freq_Hz);
-			return PTR_ERR(opp);
-		}
-		volt = dev_pm_opp_get_voltage(opp);
-		opp_freq = dev_pm_opp_get_freq(opp);
-		rcu_read_unlock();
-		tol = volt * priv->voltage_tolerance / 100;
-		volt_old = regulator_get_voltage(cpu_reg);
-		dev_dbg(cpu_dev, "Found OPP: %ld kHz, %ld uV\n",
-			opp_freq / 1000, volt);
-	}
-
-	dev_dbg(cpu_dev, "%u MHz, %d mV --> %u MHz, %ld mV\n",
-		old_freq / 1000, (volt_old > 0) ? volt_old / 1000 : -1,
-		new_freq / 1000, volt ? volt / 1000 : -1);
-
-	/* scaling up?  scale voltage before frequency */
-	if (!IS_ERR(cpu_reg) && new_freq > old_freq) {
-		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
-		if (ret) {
-			dev_err(cpu_dev, "failed to scale voltage up: %d\n",
-				ret);
-			return ret;
-		}
-	}
-
-	ret = clk_set_rate(cpu_clk, freq_exact);
-	if (ret) {
-		dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
-		if (!IS_ERR(cpu_reg) && volt_old > 0)
-			regulator_set_voltage_tol(cpu_reg, volt_old, tol);
-		return ret;
-	}
 
-	/* scaling down?  scale voltage after frequency */
-	if (!IS_ERR(cpu_reg) && new_freq < old_freq) {
-		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
-		if (ret) {
-			dev_err(cpu_dev, "failed to scale voltage down: %d\n",
-				ret);
-			clk_set_rate(cpu_clk, old_freq * 1000);
-		}
-	}
-
-	return ret;
+	return dev_pm_opp_set_rate(priv->cpu_dev,
+				   policy->freq_table[index].frequency * 1000);
 }
 
 /*
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 15/16] cpufreq: dt: No need to fetch voltage-tolerance

[Viresh Kumar]

Its already done by core and we don't need to get it anymore.  And so,
we don't need to get of node in cpufreq_init() anymore, move that to
find_supply_name() instead.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++----------------------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 150a172c7d0a..bbafd7b63d1a 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -33,7 +33,6 @@ struct private_data {
 	struct device *cpu_dev;
 	struct regulator *cpu_reg;
 	struct thermal_cooling_device *cdev;
-	unsigned int voltage_tolerance; /* in percentage */
 	const char *reg_name;
 };
 
@@ -55,24 +54,38 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
  * An earlier version of opp-v1 bindings used to name the regulator
  * "cpu0-supply", we still need to handle that for backwards compatibility.
  */
-static const char *find_supply_name(struct device *dev, struct device_node *np)
+static const char *find_supply_name(struct device *dev)
 {
+	struct device_node *np;
 	struct property *pp;
 	int cpu = dev->id;
+	const char *name = NULL;
+
+	np = of_node_get(dev->of_node);
+
+	/* This must be valid for sure */
+	if (WARN_ON(!np))
+		return NULL;
 
 	/* Try "cpu0" for older DTs */
 	if (!cpu) {
 		pp = of_find_property(np, "cpu0-supply", NULL);
-		if (pp)
-			return "cpu0";
+		if (pp) {
+			name = "cpu0";
+			goto node_put;
+		}
 	}
 
 	pp = of_find_property(np, "cpu-supply", NULL);
-	if (pp)
-		return "cpu";
+	if (pp) {
+		name = "cpu";
+		goto node_put;
+	}
 
 	dev_dbg(dev, "no regulator for cpu%d\n", cpu);
-	return NULL;
+node_put:
+	of_node_put(np);
+	return name;
 }
 
 static int allocate_resources(int cpu, struct device **cdev,
@@ -147,7 +160,6 @@ static int allocate_resources(int cpu, struct device **cdev,
 static int cpufreq_init(struct cpufreq_policy *policy)
 {
 	struct cpufreq_frequency_table *freq_table;
-	struct device_node *np;
 	struct private_data *priv;
 	struct device *cpu_dev;
 	struct regulator *cpu_reg;
@@ -164,13 +176,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		return ret;
 	}
 
-	np = of_node_get(cpu_dev->of_node);
-	if (!np) {
-		dev_err(cpu_dev, "failed to find cpu%d node\n", policy->cpu);
-		ret = -ENOENT;
-		goto out_put_reg_clk;
-	}
-
 	/* Get OPP-sharing information from "operating-points-v2" bindings */
 	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
 	if (ret) {
@@ -181,20 +186,20 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		if (ret == -ENOENT)
 			opp_v1 = true;
 		else
-			goto out_node_put;
+			goto out_put_reg_clk;
 	}
 
 	/*
 	 * OPP layer will be taking care of regulators now, but it needs to know
 	 * the name of the regulator first.
 	 */
-	name = find_supply_name(cpu_dev, np);
+	name = find_supply_name(cpu_dev);
 	if (name) {
 		ret = dev_pm_opp_set_regulator(cpu_dev, name);
 		if (ret) {
 			dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
 				policy->cpu, ret);
-			goto out_node_put;
+			goto out_put_reg_clk;
 		}
 	}
 
@@ -244,7 +249,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	priv->reg_name = name;
-	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
@@ -286,8 +290,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 
 	policy->cpuinfo.transition_latency = transition_latency;
 
-	of_node_put(np);
-
 	return 0;
 
 out_free_cpufreq_table:
@@ -298,8 +300,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	dev_pm_opp_of_cpumask_remove_table(policy->cpus);
 	if (name)
 		dev_pm_opp_put_regulator(cpu_dev);
-out_node_put:
-	of_node_put(np);
 out_put_reg_clk:
 	clk_put(cpu_clk);
 	if (!IS_ERR(cpu_reg))
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 15/16] cpufreq: dt: No need to fetch voltage-tolerance

[Viresh Kumar]

Its already done by core and we don't need to get it anymore.  And so,
we don't need to get of node in cpufreq_init() anymore, move that to
find_supply_name() instead.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++----------------------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 150a172c7d0a..bbafd7b63d1a 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -33,7 +33,6 @@ struct private_data {
 	struct device *cpu_dev;
 	struct regulator *cpu_reg;
 	struct thermal_cooling_device *cdev;
-	unsigned int voltage_tolerance; /* in percentage */
 	const char *reg_name;
 };
 
@@ -55,24 +54,38 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
  * An earlier version of opp-v1 bindings used to name the regulator
  * "cpu0-supply", we still need to handle that for backwards compatibility.
  */
-static const char *find_supply_name(struct device *dev, struct device_node *np)
+static const char *find_supply_name(struct device *dev)
 {
+	struct device_node *np;
 	struct property *pp;
 	int cpu = dev->id;
+	const char *name = NULL;
+
+	np = of_node_get(dev->of_node);
+
+	/* This must be valid for sure */
+	if (WARN_ON(!np))
+		return NULL;
 
 	/* Try "cpu0" for older DTs */
 	if (!cpu) {
 		pp = of_find_property(np, "cpu0-supply", NULL);
-		if (pp)
-			return "cpu0";
+		if (pp) {
+			name = "cpu0";
+			goto node_put;
+		}
 	}
 
 	pp = of_find_property(np, "cpu-supply", NULL);
-	if (pp)
-		return "cpu";
+	if (pp) {
+		name = "cpu";
+		goto node_put;
+	}
 
 	dev_dbg(dev, "no regulator for cpu%d\n", cpu);
-	return NULL;
+node_put:
+	of_node_put(np);
+	return name;
 }
 
 static int allocate_resources(int cpu, struct device **cdev,
@@ -147,7 +160,6 @@ static int allocate_resources(int cpu, struct device **cdev,
 static int cpufreq_init(struct cpufreq_policy *policy)
 {
 	struct cpufreq_frequency_table *freq_table;
-	struct device_node *np;
 	struct private_data *priv;
 	struct device *cpu_dev;
 	struct regulator *cpu_reg;
@@ -164,13 +176,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		return ret;
 	}
 
-	np = of_node_get(cpu_dev->of_node);
-	if (!np) {
-		dev_err(cpu_dev, "failed to find cpu%d node\n", policy->cpu);
-		ret = -ENOENT;
-		goto out_put_reg_clk;
-	}
-
 	/* Get OPP-sharing information from "operating-points-v2" bindings */
 	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
 	if (ret) {
@@ -181,20 +186,20 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		if (ret == -ENOENT)
 			opp_v1 = true;
 		else
-			goto out_node_put;
+			goto out_put_reg_clk;
 	}
 
 	/*
 	 * OPP layer will be taking care of regulators now, but it needs to know
 	 * the name of the regulator first.
 	 */
-	name = find_supply_name(cpu_dev, np);
+	name = find_supply_name(cpu_dev);
 	if (name) {
 		ret = dev_pm_opp_set_regulator(cpu_dev, name);
 		if (ret) {
 			dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
 				policy->cpu, ret);
-			goto out_node_put;
+			goto out_put_reg_clk;
 		}
 	}
 
@@ -244,7 +249,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	priv->reg_name = name;
-	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
@@ -286,8 +290,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 
 	policy->cpuinfo.transition_latency = transition_latency;
 
-	of_node_put(np);
-
 	return 0;
 
 out_free_cpufreq_table:
@@ -298,8 +300,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	dev_pm_opp_of_cpumask_remove_table(policy->cpus);
 	if (name)
 		dev_pm_opp_put_regulator(cpu_dev);
-out_node_put:
-	of_node_put(np);
 out_put_reg_clk:
 	clk_put(cpu_clk);
 	if (!IS_ERR(cpu_reg))
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 16/16] cpufreq: dt: No need to allocate resources anymore

[Viresh Kumar]

OPP layer manages it now and cpufreq-dt driver doesn't need it. But, we
still need to check for availability of resources for deferred probing.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/cpufreq-dt.c | 112 +++++++++++++++++--------------------------
 1 file changed, 45 insertions(+), 67 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index bbafd7b63d1a..f951f911786e 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -31,7 +31,6 @@
 
 struct private_data {
 	struct device *cpu_dev;
-	struct regulator *cpu_reg;
 	struct thermal_cooling_device *cdev;
 	const char *reg_name;
 };
@@ -88,73 +87,59 @@ static const char *find_supply_name(struct device *dev)
 	return name;
 }
 
-static int allocate_resources(int cpu, struct device **cdev,
-			      struct regulator **creg, struct clk **cclk)
+static int resources_available(void)
 {
 	struct device *cpu_dev;
 	struct regulator *cpu_reg;
 	struct clk *cpu_clk;
 	int ret = 0;
-	char *reg_cpu0 = "cpu0", *reg_cpu = "cpu", *reg;
+	const char *name;
 
-	cpu_dev = get_cpu_device(cpu);
+	cpu_dev = get_cpu_device(0);
 	if (!cpu_dev) {
-		pr_err("failed to get cpu%d device\n", cpu);
+		pr_err("failed to get cpu0 device\n");
 		return -ENODEV;
 	}
 
-	/* Try "cpu0" for older DTs */
-	if (!cpu)
-		reg = reg_cpu0;
-	else
-		reg = reg_cpu;
-
-try_again:
-	cpu_reg = regulator_get_optional(cpu_dev, reg);
-	ret = PTR_ERR_OR_ZERO(cpu_reg);
+	cpu_clk = clk_get(cpu_dev, NULL);
+	ret = PTR_ERR_OR_ZERO(cpu_clk);
 	if (ret) {
 		/*
-		 * If cpu's regulator supply node is present, but regulator is
-		 * not yet registered, we should try defering probe.
+		 * If cpu's clk node is present, but clock is not yet
+		 * registered, we should try defering probe.
 		 */
-		if (ret == -EPROBE_DEFER) {
-			dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n",
-				cpu);
-			return ret;
-		}
-
-		/* Try with "cpu-supply" */
-		if (reg == reg_cpu0) {
-			reg = reg_cpu;
-			goto try_again;
-		}
+		if (ret == -EPROBE_DEFER)
+			dev_dbg(cpu_dev, "clock not ready, retry\n");
+		else
+			dev_err(cpu_dev, "failed to get clock: %d\n", ret);
 
-		dev_dbg(cpu_dev, "no regulator for cpu%d: %d\n", cpu, ret);
+		return ret;
 	}
 
-	cpu_clk = clk_get(cpu_dev, NULL);
-	ret = PTR_ERR_OR_ZERO(cpu_clk);
-	if (ret) {
-		/* put regulator */
-		if (!IS_ERR(cpu_reg))
-			regulator_put(cpu_reg);
+	clk_put(cpu_clk);
+
+	name = find_supply_name(cpu_dev);
+	/* Platform doesn't require regulator */
+	if (!name)
+		return 0;
 
+	cpu_reg = regulator_get_optional(cpu_dev, name);
+	ret = PTR_ERR_OR_ZERO(cpu_reg);
+	if (ret) {
 		/*
-		 * If cpu's clk node is present, but clock is not yet
-		 * registered, we should try defering probe.
+		 * If cpu's regulator supply node is present, but regulator is
+		 * not yet registered, we should try defering probe.
 		 */
 		if (ret == -EPROBE_DEFER)
-			dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu);
+			dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
 		else
-			dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", cpu,
-				ret);
-	} else {
-		*cdev = cpu_dev;
-		*creg = cpu_reg;
-		*cclk = cpu_clk;
+			dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret);
+
+		return ret;
 	}
 
-	return ret;
+	regulator_put(cpu_reg);
+	return 0;
 }
 
 static int cpufreq_init(struct cpufreq_policy *policy)
@@ -162,7 +147,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	struct cpufreq_frequency_table *freq_table;
 	struct private_data *priv;
 	struct device *cpu_dev;
-	struct regulator *cpu_reg;
 	struct clk *cpu_clk;
 	struct dev_pm_opp *suspend_opp;
 	unsigned int transition_latency;
@@ -170,9 +154,16 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	const char *name;
 	int ret;
 
-	ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
-	if (ret) {
-		pr_err("%s: Failed to allocate resources: %d\n", __func__, ret);
+	cpu_dev = get_cpu_device(policy->cpu);
+	if (!cpu_dev) {
+		pr_err("failed to get cpu%d device\n", policy->cpu);
+		return -ENODEV;
+	}
+
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk)) {
+		ret = PTR_ERR(cpu_clk);
+		dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret);
 		return ret;
 	}
 
@@ -186,7 +177,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		if (ret == -ENOENT)
 			opp_v1 = true;
 		else
-			goto out_put_reg_clk;
+			goto out_put_clk;
 	}
 
 	/*
@@ -199,7 +190,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		if (ret) {
 			dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
 				policy->cpu, ret);
-			goto out_put_reg_clk;
+			goto out_put_clk;
 		}
 	}
 
@@ -257,9 +248,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	priv->cpu_dev = cpu_dev;
-	priv->cpu_reg = cpu_reg;
 	policy->driver_data = priv;
-
 	policy->clk = cpu_clk;
 
 	rcu_read_lock();
@@ -300,10 +289,8 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	dev_pm_opp_of_cpumask_remove_table(policy->cpus);
 	if (name)
 		dev_pm_opp_put_regulator(cpu_dev);
-out_put_reg_clk:
+out_put_clk:
 	clk_put(cpu_clk);
-	if (!IS_ERR(cpu_reg))
-		regulator_put(cpu_reg);
 
 	return ret;
 }
@@ -319,8 +306,6 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 		dev_pm_opp_put_regulator(priv->cpu_dev);
 
 	clk_put(policy->clk);
-	if (!IS_ERR(priv->cpu_reg))
-		regulator_put(priv->cpu_reg);
 	kfree(priv);
 
 	return 0;
@@ -373,9 +358,6 @@ static struct cpufreq_driver dt_cpufreq_driver = {
 
 static int dt_cpufreq_probe(struct platform_device *pdev)
 {
-	struct device *cpu_dev;
-	struct regulator *cpu_reg;
-	struct clk *cpu_clk;
 	int ret;
 
 	/*
@@ -385,19 +367,15 @@ static int dt_cpufreq_probe(struct platform_device *pdev)
 	 *
 	 * FIXME: Is checking this only for CPU0 sufficient ?
 	 */
-	ret = allocate_resources(0, &cpu_dev, &cpu_reg, &cpu_clk);
+	ret = resources_available();
 	if (ret)
 		return ret;
 
-	clk_put(cpu_clk);
-	if (!IS_ERR(cpu_reg))
-		regulator_put(cpu_reg);
-
 	dt_cpufreq_driver.driver_data = dev_get_platdata(&pdev->dev);
 
 	ret = cpufreq_register_driver(&dt_cpufreq_driver);
 	if (ret)
-		dev_err(cpu_dev, "failed register driver: %d\n", ret);
+		dev_err(&pdev->dev, "failed register driver: %d\n", ret);
 
 	return ret;
 }
-- 
2.7.1.370.gb2aa7f8

[PATCH V3 16/16] cpufreq: dt: No need to allocate resources anymore

[Viresh Kumar]

OPP layer manages it now and cpufreq-dt driver doesn't need it. But, we
still need to check for availability of resources for deferred probing.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/cpufreq-dt.c | 112 +++++++++++++++++--------------------------
 1 file changed, 45 insertions(+), 67 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index bbafd7b63d1a..f951f911786e 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -31,7 +31,6 @@
 
 struct private_data {
 	struct device *cpu_dev;
-	struct regulator *cpu_reg;
 	struct thermal_cooling_device *cdev;
 	const char *reg_name;
 };
@@ -88,73 +87,59 @@ static const char *find_supply_name(struct device *dev)
 	return name;
 }
 
-static int allocate_resources(int cpu, struct device **cdev,
-			      struct regulator **creg, struct clk **cclk)
+static int resources_available(void)
 {
 	struct device *cpu_dev;
 	struct regulator *cpu_reg;
 	struct clk *cpu_clk;
 	int ret = 0;
-	char *reg_cpu0 = "cpu0", *reg_cpu = "cpu", *reg;
+	const char *name;
 
-	cpu_dev = get_cpu_device(cpu);
+	cpu_dev = get_cpu_device(0);
 	if (!cpu_dev) {
-		pr_err("failed to get cpu%d device\n", cpu);
+		pr_err("failed to get cpu0 device\n");
 		return -ENODEV;
 	}
 
-	/* Try "cpu0" for older DTs */
-	if (!cpu)
-		reg = reg_cpu0;
-	else
-		reg = reg_cpu;
-
-try_again:
-	cpu_reg = regulator_get_optional(cpu_dev, reg);
-	ret = PTR_ERR_OR_ZERO(cpu_reg);
+	cpu_clk = clk_get(cpu_dev, NULL);
+	ret = PTR_ERR_OR_ZERO(cpu_clk);
 	if (ret) {
 		/*
-		 * If cpu's regulator supply node is present, but regulator is
-		 * not yet registered, we should try defering probe.
+		 * If cpu's clk node is present, but clock is not yet
+		 * registered, we should try defering probe.
 		 */
-		if (ret == -EPROBE_DEFER) {
-			dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n",
-				cpu);
-			return ret;
-		}
-
-		/* Try with "cpu-supply" */
-		if (reg == reg_cpu0) {
-			reg = reg_cpu;
-			goto try_again;
-		}
+		if (ret == -EPROBE_DEFER)
+			dev_dbg(cpu_dev, "clock not ready, retry\n");
+		else
+			dev_err(cpu_dev, "failed to get clock: %d\n", ret);
 
-		dev_dbg(cpu_dev, "no regulator for cpu%d: %d\n", cpu, ret);
+		return ret;
 	}
 
-	cpu_clk = clk_get(cpu_dev, NULL);
-	ret = PTR_ERR_OR_ZERO(cpu_clk);
-	if (ret) {
-		/* put regulator */
-		if (!IS_ERR(cpu_reg))
-			regulator_put(cpu_reg);
+	clk_put(cpu_clk);
+
+	name = find_supply_name(cpu_dev);
+	/* Platform doesn't require regulator */
+	if (!name)
+		return 0;
 
+	cpu_reg = regulator_get_optional(cpu_dev, name);
+	ret = PTR_ERR_OR_ZERO(cpu_reg);
+	if (ret) {
 		/*
-		 * If cpu's clk node is present, but clock is not yet
-		 * registered, we should try defering probe.
+		 * If cpu's regulator supply node is present, but regulator is
+		 * not yet registered, we should try defering probe.
 		 */
 		if (ret == -EPROBE_DEFER)
-			dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu);
+			dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
 		else
-			dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", cpu,
-				ret);
-	} else {
-		*cdev = cpu_dev;
-		*creg = cpu_reg;
-		*cclk = cpu_clk;
+			dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret);
+
+		return ret;
 	}
 
-	return ret;
+	regulator_put(cpu_reg);
+	return 0;
 }
 
 static int cpufreq_init(struct cpufreq_policy *policy)
@@ -162,7 +147,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	struct cpufreq_frequency_table *freq_table;
 	struct private_data *priv;
 	struct device *cpu_dev;
-	struct regulator *cpu_reg;
 	struct clk *cpu_clk;
 	struct dev_pm_opp *suspend_opp;
 	unsigned int transition_latency;
@@ -170,9 +154,16 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	const char *name;
 	int ret;
 
-	ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
-	if (ret) {
-		pr_err("%s: Failed to allocate resources: %d\n", __func__, ret);
+	cpu_dev = get_cpu_device(policy->cpu);
+	if (!cpu_dev) {
+		pr_err("failed to get cpu%d device\n", policy->cpu);
+		return -ENODEV;
+	}
+
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk)) {
+		ret = PTR_ERR(cpu_clk);
+		dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret);
 		return ret;
 	}
 
@@ -186,7 +177,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		if (ret == -ENOENT)
 			opp_v1 = true;
 		else
-			goto out_put_reg_clk;
+			goto out_put_clk;
 	}
 
 	/*
@@ -199,7 +190,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		if (ret) {
 			dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
 				policy->cpu, ret);
-			goto out_put_reg_clk;
+			goto out_put_clk;
 		}
 	}
 
@@ -257,9 +248,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	priv->cpu_dev = cpu_dev;
-	priv->cpu_reg = cpu_reg;
 	policy->driver_data = priv;
-
 	policy->clk = cpu_clk;
 
 	rcu_read_lock();
@@ -300,10 +289,8 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	dev_pm_opp_of_cpumask_remove_table(policy->cpus);
 	if (name)
 		dev_pm_opp_put_regulator(cpu_dev);
-out_put_reg_clk:
+out_put_clk:
 	clk_put(cpu_clk);
-	if (!IS_ERR(cpu_reg))
-		regulator_put(cpu_reg);
 
 	return ret;
 }
@@ -319,8 +306,6 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 		dev_pm_opp_put_regulator(priv->cpu_dev);
 
 	clk_put(policy->clk);
-	if (!IS_ERR(priv->cpu_reg))
-		regulator_put(priv->cpu_reg);
 	kfree(priv);
 
 	return 0;
@@ -373,9 +358,6 @@ static struct cpufreq_driver dt_cpufreq_driver = {
 
 static int dt_cpufreq_probe(struct platform_device *pdev)
 {
-	struct device *cpu_dev;
-	struct regulator *cpu_reg;
-	struct clk *cpu_clk;
 	int ret;
 
 	/*
@@ -385,19 +367,15 @@ static int dt_cpufreq_probe(struct platform_device *pdev)
 	 *
 	 * FIXME: Is checking this only for CPU0 sufficient ?
 	 */
-	ret = allocate_resources(0, &cpu_dev, &cpu_reg, &cpu_clk);
+	ret = resources_available();
 	if (ret)
 		return ret;
 
-	clk_put(cpu_clk);
-	if (!IS_ERR(cpu_reg))
-		regulator_put(cpu_reg);
-
 	dt_cpufreq_driver.driver_data = dev_get_platdata(&pdev->dev);
 
 	ret = cpufreq_register_driver(&dt_cpufreq_driver);
 	if (ret)
-		dev_err(cpu_dev, "failed register driver: %d\n", ret);
+		dev_err(&pdev->dev, "failed register driver: %d\n", ret);
 
 	return ret;
 }
-- 
2.7.1.370.gb2aa7f8

Re: [PATCH V3 01/16] PM / OPP: get/put regulators from OPP core

[Stephen Boyd]

On 02/09, Viresh Kumar wrote:
> This allows the OPP core to request/free the regulator resource,
> attached to a device OPP. The regulator device is fetched using the name
> provided by the driver, while calling: dev_pm_opp_set_regulator().
> 
> This will work for both OPP-v1 and v2 bindings.
> 
> This is a preliminary step for moving the OPP switching logic into the
> OPP core.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V3 03/16] PM / OPP: Introduce dev_pm_opp_get_max_volt_latency()

[Stephen Boyd]

On 02/09, Viresh Kumar wrote:
> In few use cases (like: cpufreq), it is desired to get the maximum
> voltage latency for changing OPPs. Add support for that.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V3 07/16] PM / OPP: Add dev_pm_opp_set_rate()

[Stephen Boyd]

On 02/09, Viresh Kumar wrote:
> This adds a routine, dev_pm_opp_set_rate(), responsible for configuring
> power-supply and clock source for an OPP.
> 
> The OPP is found by matching against the target_freq passed to the
> routine. This shall replace similar code present in most of the OPP
> users and help simplify them a lot.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core

[Stephen Boyd]

On 02/09, Viresh Kumar wrote:
> OPP core can handle the regulators by itself, and but it needs to know
> the name of the regulator to fetch. Add support for that.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V3 16/16] cpufreq: dt: No need to allocate resources anymore

[Stephen Boyd]

On 02/09, Viresh Kumar wrote:
> OPP layer manages it now and cpufreq-dt driver doesn't need it. But, we
> still need to check for availability of resources for deferred probing.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V3 00/16] PM / OPP: Introduce APIs to transition OPPs

[Rafael J. Wysocki]

On Tue, Feb 9, 2016 at 6:00 AM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> Hi Guys,
>
> This patchset add APIs in OPP layer to allow OPPs transitioning from
> within OPP layer. Currently all OPP users need to replicate the same
> code to switch between OPPs. While the same can be handled easily by
> OPP-core.
>
> The first 7 patches update the OPP core to introduce the new APIs and
> the next Nine patches update cpufreq-dt for the same.
>
> 11 out of 17 are already Reviewed by Stephen, only few are left :)
>
> I hope this is the last version of the series :)
>
> Testing:
> - Tested on exynos 5250-arndale (dual-cortex-A15)
> - Tested for both Old-V1 bindings and New V2 bindings
> - Tested with regulator names as: 'cpu-supply' and 'cpu0-supply'
> - Tested with Unsupported supply ranges as well, to check the
>   opp-disable logic
>
> V2->V3:
> - Very minor updates.
> - find_supply_name() doesn't return an error value now, and so its
>   callers don't check for it.
> - And so we don't need to initialize name to NULL
>
> Viresh Kumar (16):
>   PM / OPP: get/put regulators from OPP core
>   PM / OPP: Disable OPPs that aren't supported by the regulator
>   PM / OPP: Introduce dev_pm_opp_get_max_volt_latency()
>   PM / OPP: Introduce dev_pm_opp_get_max_transition_latency()
>   PM / OPP: Parse clock-latency and voltage-tolerance for v1 bindings
>   PM / OPP: Manage device clk
>   PM / OPP: Add dev_pm_opp_set_rate()
>   cpufreq: dt: Convert few pr_debug/err() calls to dev_dbg/err()
>   cpufreq: dt: Rename 'need_update' to 'opp_v1'
>   cpufreq: dt: OPP layers handles clock-latency for V1 bindings as well
>   cpufreq: dt: Pass regulator name to the OPP core
>   cpufreq: dt: Unsupported OPPs are already disabled
>   cpufreq: dt: Reuse dev_pm_opp_get_max_transition_latency()
>   cpufreq: dt: Use dev_pm_opp_set_rate() to switch frequency
>   cpufreq: dt: No need to fetch voltage-tolerance
>   cpufreq: dt: No need to allocate resources anymore
>
>  drivers/base/power/opp/core.c | 420 ++++++++++++++++++++++++++++++++++++++++++
>  drivers/base/power/opp/opp.h  |  13 ++
>  drivers/cpufreq/cpufreq-dt.c  | 300 +++++++++++-------------------
>  include/linux/pm_opp.h        |  27 +++
>  4 files changed, 565 insertions(+), 195 deletions(-)

Since this has all been reviewed now, I've applied the series (and it
has broken something already in linux-next, JFTR).

Thanks,
Rafael

Re: [PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core

[Geert Uytterhoeven]

Hi Viresh,

CC device-tree folks

Replying to an old email, because that's the most accurate reference I
could find.

On Tue, Feb 9, 2016 at 6:06 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> OPP core can handle the regulators by itself, and but it needs to know
> the name of the regulator to fetch. Add support for that.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>
> diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> index 4c9f8a828f6f..2af75f8088bb 100644
> --- a/drivers/cpufreq/cpufreq-dt.c
> +++ b/drivers/cpufreq/cpufreq-dt.c

> @@ -119,6 +120,30 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
>         return ret;
>  }
>
> +/*
> + * An earlier version of opp-v1 bindings used to name the regulator
> + * "cpu0-supply", we still need to handle that for backwards compatibility.
> + */
> +static const char *find_supply_name(struct device *dev, struct device_node *np)
> +{
> +       struct property *pp;
> +       int cpu = dev->id;
> +
> +       /* Try "cpu0" for older DTs */
> +       if (!cpu) {
> +               pp = of_find_property(np, "cpu0-supply", NULL);
> +               if (pp)
> +                       return "cpu0";
> +       }
> +
> +       pp = of_find_property(np, "cpu-supply", NULL);
> +       if (pp)
> +               return "cpu";

Despite the existence of lots of users of these properties, I couldn't find
both the "earlier version" and the "current version" of the opp-v1 bindings
documenting the "cpu0-supply" and "cpu-supply" properties?

Even for opp-v2, they are not documented in
Documentation/devicetree/bindings/opp/opp.txt, but cpu-supply is used in
the examples?
For v2, I did find "[PATCH 01/16] PM / OPP: Add 'supply-names' binding"
https://lore.kernel.org/lkml/2b87b162eabd1570ae2311e1ef8655acda72f678.1441972771.git.viresh.kumar@linaro.org/
but presumably that's an even further evolution?

Can you please document these properties?
Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core

[Geert Uytterhoeven]

Hi Viresh,

CC device-tree folks

Replying to an old email, because that's the most accurate reference I
could find.

On Tue, Feb 9, 2016 at 6:06 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> OPP core can handle the regulators by itself, and but it needs to know
> the name of the regulator to fetch. Add support for that.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>
> diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> index 4c9f8a828f6f..2af75f8088bb 100644
> --- a/drivers/cpufreq/cpufreq-dt.c
> +++ b/drivers/cpufreq/cpufreq-dt.c

> @@ -119,6 +120,30 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
>         return ret;
>  }
>
> +/*
> + * An earlier version of opp-v1 bindings used to name the regulator
> + * "cpu0-supply", we still need to handle that for backwards compatibility.
> + */
> +static const char *find_supply_name(struct device *dev, struct device_node *np)
> +{
> +       struct property *pp;
> +       int cpu = dev->id;
> +
> +       /* Try "cpu0" for older DTs */
> +       if (!cpu) {
> +               pp = of_find_property(np, "cpu0-supply", NULL);
> +               if (pp)
> +                       return "cpu0";
> +       }
> +
> +       pp = of_find_property(np, "cpu-supply", NULL);
> +       if (pp)
> +               return "cpu";

Despite the existence of lots of users of these properties, I couldn't find
both the "earlier version" and the "current version" of the opp-v1 bindings
documenting the "cpu0-supply" and "cpu-supply" properties?

Even for opp-v2, they are not documented in
Documentation/devicetree/bindings/opp/opp.txt, but cpu-supply is used in
the examples?
For v2, I did find "[PATCH 01/16] PM / OPP: Add 'supply-names' binding"
https://lore.kernel.org/lkml/2b87b162eabd1570ae2311e1ef8655acda72f678.1441972771.git.viresh.kumar@linaro.org/
but presumably that's an even further evolution?

Can you please document these properties?
Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core

[Viresh Kumar]

On 17-07-18, 09:46, Geert Uytterhoeven wrote:
> Hi Viresh,
> 
> CC device-tree folks
> 
> Replying to an old email, because that's the most accurate reference I
> could find.
> 
> On Tue, Feb 9, 2016 at 6:06 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > OPP core can handle the regulators by itself, and but it needs to know
> > the name of the regulator to fetch. Add support for that.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> >  drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 46 insertions(+)
> >
> > diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> > index 4c9f8a828f6f..2af75f8088bb 100644
> > --- a/drivers/cpufreq/cpufreq-dt.c
> > +++ b/drivers/cpufreq/cpufreq-dt.c
> 
> > @@ -119,6 +120,30 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
> >         return ret;
> >  }
> >
> > +/*
> > + * An earlier version of opp-v1 bindings used to name the regulator
> > + * "cpu0-supply", we still need to handle that for backwards compatibility.
> > + */
> > +static const char *find_supply_name(struct device *dev, struct device_node *np)
> > +{
> > +       struct property *pp;
> > +       int cpu = dev->id;
> > +
> > +       /* Try "cpu0" for older DTs */
> > +       if (!cpu) {
> > +               pp = of_find_property(np, "cpu0-supply", NULL);
> > +               if (pp)
> > +                       return "cpu0";
> > +       }
> > +
> > +       pp = of_find_property(np, "cpu-supply", NULL);
> > +       if (pp)
> > +               return "cpu";
> 
> Despite the existence of lots of users of these properties, I couldn't find
> both the "earlier version" and the "current version" of the opp-v1 bindings
> documenting the "cpu0-supply" and "cpu-supply" properties?

They are part of the device nodes and don't fall under the
jurisdiction of OPP tables and so aren't defined there. We rely on the
"<name>-supply" property from the regulator bindings for the devices.

> Even for opp-v2, they are not documented in
> Documentation/devicetree/bindings/opp/opp.txt, but cpu-supply is used in
> the examples?

Same reasoning here as well.

> For v2, I did find "[PATCH 01/16] PM / OPP: Add 'supply-names' binding"
> https://lore.kernel.org/lkml/2b87b162eabd1570ae2311e1ef8655acda72f678.1441972771.git.viresh.kumar@linaro.org/
> but presumably that's an even further evolution?

Yeah, that never made it to mainline is abandoned.

> Can you please document these properties?

I don't think we need to, do we ?

-- 
viresh

Re: [PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core

[Viresh Kumar]

On 17-07-18, 09:46, Geert Uytterhoeven wrote:
> Hi Viresh,
> 
> CC device-tree folks
> 
> Replying to an old email, because that's the most accurate reference I
> could find.
> 
> On Tue, Feb 9, 2016 at 6:06 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > OPP core can handle the regulators by itself, and but it needs to know
> > the name of the regulator to fetch. Add support for that.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> >  drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 46 insertions(+)
> >
> > diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> > index 4c9f8a828f6f..2af75f8088bb 100644
> > --- a/drivers/cpufreq/cpufreq-dt.c
> > +++ b/drivers/cpufreq/cpufreq-dt.c
> 
> > @@ -119,6 +120,30 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
> >         return ret;
> >  }
> >
> > +/*
> > + * An earlier version of opp-v1 bindings used to name the regulator
> > + * "cpu0-supply", we still need to handle that for backwards compatibility.
> > + */
> > +static const char *find_supply_name(struct device *dev, struct device_node *np)
> > +{
> > +       struct property *pp;
> > +       int cpu = dev->id;
> > +
> > +       /* Try "cpu0" for older DTs */
> > +       if (!cpu) {
> > +               pp = of_find_property(np, "cpu0-supply", NULL);
> > +               if (pp)
> > +                       return "cpu0";
> > +       }
> > +
> > +       pp = of_find_property(np, "cpu-supply", NULL);
> > +       if (pp)
> > +               return "cpu";
> 
> Despite the existence of lots of users of these properties, I couldn't find
> both the "earlier version" and the "current version" of the opp-v1 bindings
> documenting the "cpu0-supply" and "cpu-supply" properties?

They are part of the device nodes and don't fall under the
jurisdiction of OPP tables and so aren't defined there. We rely on the
"<name>-supply" property from the regulator bindings for the devices.

> Even for opp-v2, they are not documented in
> Documentation/devicetree/bindings/opp/opp.txt, but cpu-supply is used in
> the examples?

Same reasoning here as well.

> For v2, I did find "[PATCH 01/16] PM / OPP: Add 'supply-names' binding"
> https://lore.kernel.org/lkml/2b87b162eabd1570ae2311e1ef8655acda72f678.1441972771.git.viresh.kumar@linaro.org/
> but presumably that's an even further evolution?

Yeah, that never made it to mainline is abandoned.

> Can you please document these properties?

I don't think we need to, do we ?

-- 
viresh

Re: [PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core

[Geert Uytterhoeven]

Hi Viresh,

On Wed, Jul 18, 2018 at 7:50 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> On 17-07-18, 09:46, Geert Uytterhoeven wrote:
> > CC device-tree folks
> >
> > Replying to an old email, because that's the most accurate reference I
> > could find.
> >
> > On Tue, Feb 9, 2016 at 6:06 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > > OPP core can handle the regulators by itself, and but it needs to know
> > > the name of the regulator to fetch. Add support for that.
> > >
> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > > ---
> > >  drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
> > >  1 file changed, 46 insertions(+)
> > >
> > > diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> > > index 4c9f8a828f6f..2af75f8088bb 100644
> > > --- a/drivers/cpufreq/cpufreq-dt.c
> > > +++ b/drivers/cpufreq/cpufreq-dt.c
> >
> > > @@ -119,6 +120,30 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
> > >         return ret;
> > >  }
> > >
> > > +/*
> > > + * An earlier version of opp-v1 bindings used to name the regulator
> > > + * "cpu0-supply", we still need to handle that for backwards compatibility.
> > > + */
> > > +static const char *find_supply_name(struct device *dev, struct device_node *np)
> > > +{
> > > +       struct property *pp;
> > > +       int cpu = dev->id;
> > > +
> > > +       /* Try "cpu0" for older DTs */
> > > +       if (!cpu) {
> > > +               pp = of_find_property(np, "cpu0-supply", NULL);
> > > +               if (pp)
> > > +                       return "cpu0";
> > > +       }
> > > +
> > > +       pp = of_find_property(np, "cpu-supply", NULL);
> > > +       if (pp)
> > > +               return "cpu";
> >
> > Despite the existence of lots of users of these properties, I couldn't find
> > both the "earlier version" and the "current version" of the opp-v1 bindings
> > documenting the "cpu0-supply" and "cpu-supply" properties?
>
> They are part of the device nodes and don't fall under the
> jurisdiction of OPP tables and so aren't defined there. We rely on the
> "<name>-supply" property from the regulator bindings for the devices.
>
> > Even for opp-v2, they are not documented in
> > Documentation/devicetree/bindings/opp/opp.txt, but cpu-supply is used in
> > the examples?
>
> Same reasoning here as well.

Right, they are part of the cpu nodes, not of the operating-points properties
(which are part of the cpu nodes) or the opp_table nodes (for v2).

> > Can you please document these properties?
>
> I don't think we need to, do we ?

IMHO they should be documented somewhere, with a link to
Documentation/devicetree/bindings/regulator/regulator.txt.
How else can a DTS writer know he/she needs them?
Without cpu-supply (and clock!) properties, cpufreq can't work.

Candidates:
  - Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
    This has operating points without clocks nor cpu-supply, but with
    clock-latency (for which clock? ;-)
  - Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
    Again, operating points without clocks nor cpu-supply, but with
    clock-latency.

Thanks!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core

[Geert Uytterhoeven]

Hi Viresh,

On Wed, Jul 18, 2018 at 7:50 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> On 17-07-18, 09:46, Geert Uytterhoeven wrote:
> > CC device-tree folks
> >
> > Replying to an old email, because that's the most accurate reference I
> > could find.
> >
> > On Tue, Feb 9, 2016 at 6:06 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > > OPP core can handle the regulators by itself, and but it needs to know
> > > the name of the regulator to fetch. Add support for that.
> > >
> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > > ---
> > >  drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
> > >  1 file changed, 46 insertions(+)
> > >
> > > diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> > > index 4c9f8a828f6f..2af75f8088bb 100644
> > > --- a/drivers/cpufreq/cpufreq-dt.c
> > > +++ b/drivers/cpufreq/cpufreq-dt.c
> >
> > > @@ -119,6 +120,30 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
> > >         return ret;
> > >  }
> > >
> > > +/*
> > > + * An earlier version of opp-v1 bindings used to name the regulator
> > > + * "cpu0-supply", we still need to handle that for backwards compatibility.
> > > + */
> > > +static const char *find_supply_name(struct device *dev, struct device_node *np)
> > > +{
> > > +       struct property *pp;
> > > +       int cpu = dev->id;
> > > +
> > > +       /* Try "cpu0" for older DTs */
> > > +       if (!cpu) {
> > > +               pp = of_find_property(np, "cpu0-supply", NULL);
> > > +               if (pp)
> > > +                       return "cpu0";
> > > +       }
> > > +
> > > +       pp = of_find_property(np, "cpu-supply", NULL);
> > > +       if (pp)
> > > +               return "cpu";
> >
> > Despite the existence of lots of users of these properties, I couldn't find
> > both the "earlier version" and the "current version" of the opp-v1 bindings
> > documenting the "cpu0-supply" and "cpu-supply" properties?
>
> They are part of the device nodes and don't fall under the
> jurisdiction of OPP tables and so aren't defined there. We rely on the
> "<name>-supply" property from the regulator bindings for the devices.
>
> > Even for opp-v2, they are not documented in
> > Documentation/devicetree/bindings/opp/opp.txt, but cpu-supply is used in
> > the examples?
>
> Same reasoning here as well.

Right, they are part of the cpu nodes, not of the operating-points properties
(which are part of the cpu nodes) or the opp_table nodes (for v2).

> > Can you please document these properties?
>
> I don't think we need to, do we ?

IMHO they should be documented somewhere, with a link to
Documentation/devicetree/bindings/regulator/regulator.txt.
How else can a DTS writer know he/she needs them?
Without cpu-supply (and clock!) properties, cpufreq can't work.

Candidates:
  - Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
    This has operating points without clocks nor cpu-supply, but with
    clock-latency (for which clock? ;-)
  - Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
    Again, operating points without clocks nor cpu-supply, but with
    clock-latency.

Thanks!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core

[Viresh Kumar]

On 18-07-18, 09:09, Geert Uytterhoeven wrote:
> IMHO they should be documented somewhere, with a link to
> Documentation/devicetree/bindings/regulator/regulator.txt.
> How else can a DTS writer know he/she needs them?
> Without cpu-supply (and clock!) properties, cpufreq can't work.
> 
> Candidates:
>   - Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
>     This has operating points without clocks nor cpu-supply, but with
>     clock-latency (for which clock? ;-)
>   - Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
>     Again, operating points without clocks nor cpu-supply, but with
>     clock-latency.

Sounds reasonable. Will cook patches for that soon. Thanks.

-- 
viresh

Re: [PATCH V3 11/16] cpufreq: dt: Pass regulator name to the OPP core

[Viresh Kumar]

On 18-07-18, 09:09, Geert Uytterhoeven wrote:
> IMHO they should be documented somewhere, with a link to
> Documentation/devicetree/bindings/regulator/regulator.txt.
> How else can a DTS writer know he/she needs them?
> Without cpu-supply (and clock!) properties, cpufreq can't work.
> 
> Candidates:
>   - Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
>     This has operating points without clocks nor cpu-supply, but with
>     clock-latency (for which clock? ;-)
>   - Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
>     Again, operating points without clocks nor cpu-supply, but with
>     clock-latency.

Sounds reasonable. Will cook patches for that soon. Thanks.

-- 
viresh