* [GIT PULL] ARM: aspeed: dts changes for 4.19
@ 2018-07-26 4:30 Joel Stanley
2018-07-26 19:51 ` Olof Johansson
0 siblings, 1 reply; 3+ messages in thread
From: Joel Stanley @ 2018-07-26 4:30 UTC (permalink / raw)
To: linux-arm-kernel
Hello ARM Maintainers,
Here are the ASPEED device tree updates for 4.19. No new machines this time
around, but we now have some FSI (the bus between the BMC and the PowerPC host)
descriptions, and USB support.
The following changes since commit 7daf201d7fe8334e2d2364d4e8ed3394ec9af819:
Linux 4.18-rc2 (2018-06-24 20:54:29 +0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git
tags/aspeed-4.19-devicetree
for you to fetch changes up to 19617a35b08379b3e6da0a4ee0d2d62645bf1b9e:
ARM: dts: aspeed: Add Power9 CFAM description (2018-07-25 17:43:36 +0930)
----------------------------------------------------------------
ASPEED device tree updates for 4.19
- New support for the ASPEED USB host controller and USB vhub (device)
support
- Descriptions for the FSI bus and hardware inside the Power8/Power9
processors that are accessed over this bus. This includes the ColdFire
processor that is part of the ASPEED SoC and is used to offload the FSI
bit-banging
- Small fixes:
* pwm/tach clock
* Romulus framebuffer location
----------------------------------------------------------------
Benjamin Herrenschmidt (11):
ARM: dts: aspeed: Add G4 USB pinmux
ARM: dts: aspeed: Add G5 USB host pinmux
ARM: dts: aspeed: Add G4 USB Virtual Hub
ARM: dts: aspeed: Add G5 USB Virtual Hub
ARM: dts: aspeed: Enable vhub on port A of AST2500 EVB
ARM: dts: aspeed: Fix Romulus VGA frame buffer
ARM: dts: aspeed: Add coprocessor interrupt controller
ARM: dts: aspeed: Romulus system can use coprocessor for FSI
ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
ARM: dts: aspeed: Add Power8 CFAM description for use by Palmetto
ARM: dts: aspeed: Add Power9 CFAM description
Lei YU (1):
ARM: dts: aspeed: Use 24MHz fixed clock for pwm
arch/arm/boot/dts/aspeed-ast2500-evb.dts | 14 +--
arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts | 1 +
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 38 +++++++--
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 17 +++-
arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 2 +
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 2 +
arch/arm/boot/dts/aspeed-g4.dtsi | 26 +++++-
arch/arm/boot/dts/aspeed-g5.dtsi | 34 +++++++-
arch/arm/boot/dts/ibm-power8-cfam.dtsi | 31 +++++++
arch/arm/boot/dts/ibm-power9-cfam.dtsi | 104 +++++++++++++++++++++++
arch/arm/boot/dts/ibm-power9-dual.dtsi | 57 +++++++++++++
11 files changed, 305 insertions(+), 21 deletions(-)
create mode 100644 arch/arm/boot/dts/ibm-power8-cfam.dtsi
create mode 100644 arch/arm/boot/dts/ibm-power9-cfam.dtsi
create mode 100644 arch/arm/boot/dts/ibm-power9-dual.dtsi
^ permalink raw reply [flat|nested] 3+ messages in thread
* [GIT PULL] ARM: aspeed: dts changes for 4.19
2018-07-26 4:30 [GIT PULL] ARM: aspeed: dts changes for 4.19 Joel Stanley
@ 2018-07-26 19:51 ` Olof Johansson
2018-07-27 1:22 ` Joel Stanley
0 siblings, 1 reply; 3+ messages in thread
From: Olof Johansson @ 2018-07-26 19:51 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Thu, Jul 26, 2018 at 02:00:49PM +0930, Joel Stanley wrote:
> Hello ARM Maintainers,
>
> Here are the ASPEED device tree updates for 4.19. No new machines this time
> around, but we now have some FSI (the bus between the BMC and the PowerPC host)
> descriptions, and USB support.
>
> The following changes since commit 7daf201d7fe8334e2d2364d4e8ed3394ec9af819:
>
> Linux 4.18-rc2 (2018-06-24 20:54:29 +0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git
> tags/aspeed-4.19-devicetree
>
> for you to fetch changes up to 19617a35b08379b3e6da0a4ee0d2d62645bf1b9e:
>
> ARM: dts: aspeed: Add Power9 CFAM description (2018-07-25 17:43:36 +0930)
>
> ----------------------------------------------------------------
> ASPEED device tree updates for 4.19
>
> - New support for the ASPEED USB host controller and USB vhub (device)
> support
>
> - Descriptions for the FSI bus and hardware inside the Power8/Power9
> processors that are accessed over this bus. This includes the ColdFire
> processor that is part of the ASPEED SoC and is used to offload the FSI
> bit-banging
I had some feedback on one of these patches, it should be reworked before we
merge it. See separate email as reply to the actual patch.
If you prefer, you can send a branch without that contents for merging now, so
the rest of it isn't held up.
-Olof
^ permalink raw reply [flat|nested] 3+ messages in thread
* [GIT PULL] ARM: aspeed: dts changes for 4.19
2018-07-26 19:51 ` Olof Johansson
@ 2018-07-27 1:22 ` Joel Stanley
0 siblings, 0 replies; 3+ messages in thread
From: Joel Stanley @ 2018-07-27 1:22 UTC (permalink / raw)
To: linux-arm-kernel
On 27 July 2018 at 05:21, Olof Johansson <olof@lixom.net> wrote:
> Hi,
>
> On Thu, Jul 26, 2018 at 02:00:49PM +0930, Joel Stanley wrote:
>> Hello ARM Maintainers,
>>
>> Here are the ASPEED device tree updates for 4.19. No new machines this time
>> around, but we now have some FSI (the bus between the BMC and the PowerPC host)
>> descriptions, and USB support.
>>
>> The following changes since commit 7daf201d7fe8334e2d2364d4e8ed3394ec9af819:
>>
>> Linux 4.18-rc2 (2018-06-24 20:54:29 +0800)
>>
>> are available in the Git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git
>> tags/aspeed-4.19-devicetree
>>
>> for you to fetch changes up to 19617a35b08379b3e6da0a4ee0d2d62645bf1b9e:
>>
>> ARM: dts: aspeed: Add Power9 CFAM description (2018-07-25 17:43:36 +0930)
>>
>> ----------------------------------------------------------------
>> ASPEED device tree updates for 4.19
>>
>> - New support for the ASPEED USB host controller and USB vhub (device)
>> support
>>
>> - Descriptions for the FSI bus and hardware inside the Power8/Power9
>> processors that are accessed over this bus. This includes the ColdFire
>> processor that is part of the ASPEED SoC and is used to offload the FSI
>> bit-banging
>
> I had some feedback on one of these patches, it should be reworked before we
> merge it. See separate email as reply to the actual patch.
>
> If you prefer, you can send a branch without that contents for merging now, so
> the rest of it isn't held up.
No worries. I have sent a pull request without the FSI changes.
Thanks for taking a close look!
Cheers,
Joel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-07-27 1:22 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-26 4:30 [GIT PULL] ARM: aspeed: dts changes for 4.19 Joel Stanley
2018-07-26 19:51 ` Olof Johansson
2018-07-27 1:22 ` Joel Stanley
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.