* [PATCH net-next 0/5] A test for mirror-to-gretap with team in UL packet path
@ 2018-07-30 14:37 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:37 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
This patchset adds a test for "tc action mirred mirror" where the
mirrored-to device is a gretap, and underlay path contains a team
device.
In patch #1 require_command() is added, which should henceforth be used
to declare dependence on a certain tool.
In patch #2, two new functions, team_create() and team_destroy(), are
added to lib.sh.
The newly-added test uses arping, which isn't necessarily available.
Therefore patch #3 introduces $ARPING, and a preexisting test is fixed
to require_command $ARPING.
In patches #4 and #5, two new tests are added. In both cases, a team
device is on egress path of a mirrored packet in a mirror-to-gretap
scenario. In the first one, the team device is in loadbalance mode, in
the second one it's in lacp mode. (The difference in modes necessitates
a different testing strategy, hence two test cases instead of just
parameterizing one.)
Petr Machata (5):
selftests: forwarding: lib: Add require_command()
selftests: forwarding: lib: Support team devices
selftests: forwarding: Introduce $ARPING
selftests: forwarding: Test mirror-to-gretap w/ UL team
selftests: forwarding: Test mirror-to-gretap w/ UL team LACP
tools/testing/selftests/net/forwarding/lib.sh | 43 +++-
.../net/forwarding/mirror_gre_bridge_1q_lag.sh | 283 ++++++++++++++++++++
.../net/forwarding/mirror_gre_lag_lacp.sh | 285 +++++++++++++++++++++
.../net/forwarding/mirror_gre_vlan_bridge_1q.sh | 6 +-
4 files changed, 607 insertions(+), 10 deletions(-)
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
--
2.4.11
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH net-next 0/5] A test for mirror-to-gretap with team in UL packet path
@ 2018-07-30 14:37 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: petrm @ 2018-07-30 14:37 UTC (permalink / raw)
This patchset adds a test for "tc action mirred mirror" where the
mirrored-to device is a gretap, and underlay path contains a team
device.
In patch #1 require_command() is added, which should henceforth be used
to declare dependence on a certain tool.
In patch #2, two new functions, team_create() and team_destroy(), are
added to lib.sh.
The newly-added test uses arping, which isn't necessarily available.
Therefore patch #3 introduces $ARPING, and a preexisting test is fixed
to require_command $ARPING.
In patches #4 and #5, two new tests are added. In both cases, a team
device is on egress path of a mirrored packet in a mirror-to-gretap
scenario. In the first one, the team device is in loadbalance mode, in
the second one it's in lacp mode. (The difference in modes necessitates
a different testing strategy, hence two test cases instead of just
parameterizing one.)
Petr Machata (5):
selftests: forwarding: lib: Add require_command()
selftests: forwarding: lib: Support team devices
selftests: forwarding: Introduce $ARPING
selftests: forwarding: Test mirror-to-gretap w/ UL team
selftests: forwarding: Test mirror-to-gretap w/ UL team LACP
tools/testing/selftests/net/forwarding/lib.sh | 43 +++-
.../net/forwarding/mirror_gre_bridge_1q_lag.sh | 283 ++++++++++++++++++++
.../net/forwarding/mirror_gre_lag_lacp.sh | 285 +++++++++++++++++++++
.../net/forwarding/mirror_gre_vlan_bridge_1q.sh | 6 +-
4 files changed, 607 insertions(+), 10 deletions(-)
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH net-next 0/5] A test for mirror-to-gretap with team in UL packet path
@ 2018-07-30 14:37 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:37 UTC (permalink / raw)
This patchset adds a test for "tc action mirred mirror" where the
mirrored-to device is a gretap, and underlay path contains a team
device.
In patch #1 require_command() is added, which should henceforth be used
to declare dependence on a certain tool.
In patch #2, two new functions, team_create() and team_destroy(), are
added to lib.sh.
The newly-added test uses arping, which isn't necessarily available.
Therefore patch #3 introduces $ARPING, and a preexisting test is fixed
to require_command $ARPING.
In patches #4 and #5, two new tests are added. In both cases, a team
device is on egress path of a mirrored packet in a mirror-to-gretap
scenario. In the first one, the team device is in loadbalance mode, in
the second one it's in lacp mode. (The difference in modes necessitates
a different testing strategy, hence two test cases instead of just
parameterizing one.)
Petr Machata (5):
selftests: forwarding: lib: Add require_command()
selftests: forwarding: lib: Support team devices
selftests: forwarding: Introduce $ARPING
selftests: forwarding: Test mirror-to-gretap w/ UL team
selftests: forwarding: Test mirror-to-gretap w/ UL team LACP
tools/testing/selftests/net/forwarding/lib.sh | 43 +++-
.../net/forwarding/mirror_gre_bridge_1q_lag.sh | 283 ++++++++++++++++++++
.../net/forwarding/mirror_gre_lag_lacp.sh | 285 +++++++++++++++++++++
.../net/forwarding/mirror_gre_vlan_bridge_1q.sh | 6 +-
4 files changed, 607 insertions(+), 10 deletions(-)
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH net-next 1/5] selftests: forwarding: lib: Add require_command()
2018-07-30 14:37 ` petrm
(?)
@ 2018-07-30 14:39 ` petrm
-1 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:39 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
The logic for testing whether a certain command is available is used
several times in the current code base. The tests in follow-up patches
add more requirements like that.
Therefore extract the logic into a named function, require_command(),
that can be used directly from lib.sh as well as from any test that
wishes to declare dependence on some command.
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 158d59ffee40..81e36157bf16 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -62,15 +62,18 @@ if [[ "$CHECK_TC" = "yes" ]]; then
check_tc_version
fi
-if [[ ! -x "$(command -v jq)" ]]; then
- echo "SKIP: jq not installed"
- exit 1
-fi
+require_command()
+{
+ local cmd=$1; shift
-if [[ ! -x "$(command -v $MZ)" ]]; then
- echo "SKIP: $MZ not installed"
- exit 1
-fi
+ if [[ ! -x "$(command -v "$cmd")" ]]; then
+ echo "SKIP: $cmd not installed"
+ exit 1
+ fi
+}
+
+require_command jq
+require_command $MZ
if [[ ! -v NUM_NETIFS ]]; then
echo "SKIP: importer does not define \"NUM_NETIFS\""
--
2.4.11
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 1/5] selftests: forwarding: lib: Add require_command()
@ 2018-07-30 14:39 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: petrm @ 2018-07-30 14:39 UTC (permalink / raw)
The logic for testing whether a certain command is available is used
several times in the current code base. The tests in follow-up patches
add more requirements like that.
Therefore extract the logic into a named function, require_command(),
that can be used directly from lib.sh as well as from any test that
wishes to declare dependence on some command.
Signed-off-by: Petr Machata <petrm at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 158d59ffee40..81e36157bf16 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -62,15 +62,18 @@ if [[ "$CHECK_TC" = "yes" ]]; then
check_tc_version
fi
-if [[ ! -x "$(command -v jq)" ]]; then
- echo "SKIP: jq not installed"
- exit 1
-fi
+require_command()
+{
+ local cmd=$1; shift
-if [[ ! -x "$(command -v $MZ)" ]]; then
- echo "SKIP: $MZ not installed"
- exit 1
-fi
+ if [[ ! -x "$(command -v "$cmd")" ]]; then
+ echo "SKIP: $cmd not installed"
+ exit 1
+ fi
+}
+
+require_command jq
+require_command $MZ
if [[ ! -v NUM_NETIFS ]]; then
echo "SKIP: importer does not define \"NUM_NETIFS\""
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 1/5] selftests: forwarding: lib: Add require_command()
@ 2018-07-30 14:39 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:39 UTC (permalink / raw)
The logic for testing whether a certain command is available is used
several times in the current code base. The tests in follow-up patches
add more requirements like that.
Therefore extract the logic into a named function, require_command(),
that can be used directly from lib.sh as well as from any test that
wishes to declare dependence on some command.
Signed-off-by: Petr Machata <petrm at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 158d59ffee40..81e36157bf16 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -62,15 +62,18 @@ if [[ "$CHECK_TC" = "yes" ]]; then
check_tc_version
fi
-if [[ ! -x "$(command -v jq)" ]]; then
- echo "SKIP: jq not installed"
- exit 1
-fi
+require_command()
+{
+ local cmd=$1; shift
-if [[ ! -x "$(command -v $MZ)" ]]; then
- echo "SKIP: $MZ not installed"
- exit 1
-fi
+ if [[ ! -x "$(command -v "$cmd")" ]]; then
+ echo "SKIP: $cmd not installed"
+ exit 1
+ fi
+}
+
+require_command jq
+require_command $MZ
if [[ ! -v NUM_NETIFS ]]; then
echo "SKIP: importer does not define \"NUM_NETIFS\""
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 2/5] selftests: forwarding: lib: Support team devices
2018-07-30 14:37 ` petrm
(?)
@ 2018-07-30 14:39 ` petrm
-1 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:39 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
Add team_create() and team_destroy() to manage team netdevices.
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 81e36157bf16..3a4eba4f0d08 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -8,6 +8,7 @@
PING=${PING:=ping}
PING6=${PING6:=ping6}
MZ=${MZ:=mausezahn}
+TEAMD=${TEAMD:=teamd}
WAIT_TIME=${WAIT_TIME:=5}
PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no}
@@ -425,6 +426,28 @@ vlan_destroy()
ip link del dev $name
}
+team_create()
+{
+ local if_name=$1; shift
+ local mode=$1; shift
+
+ require_command $TEAMD
+ $TEAMD -t $if_name -d -c '{"runner": {"name": "'$mode'"}}'
+ for slave in "$@"; do
+ ip link set dev $slave down
+ ip link set dev $slave master $if_name
+ ip link set dev $slave up
+ done
+ ip link set dev $if_name up
+}
+
+team_destroy()
+{
+ local if_name=$1; shift
+
+ $TEAMD -t $if_name -k
+}
+
master_name_get()
{
local if_name=$1
--
2.4.11
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 2/5] selftests: forwarding: lib: Support team devices
@ 2018-07-30 14:39 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: petrm @ 2018-07-30 14:39 UTC (permalink / raw)
Add team_create() and team_destroy() to manage team netdevices.
Signed-off-by: Petr Machata <petrm at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 81e36157bf16..3a4eba4f0d08 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -8,6 +8,7 @@
PING=${PING:=ping}
PING6=${PING6:=ping6}
MZ=${MZ:=mausezahn}
+TEAMD=${TEAMD:=teamd}
WAIT_TIME=${WAIT_TIME:=5}
PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no}
@@ -425,6 +426,28 @@ vlan_destroy()
ip link del dev $name
}
+team_create()
+{
+ local if_name=$1; shift
+ local mode=$1; shift
+
+ require_command $TEAMD
+ $TEAMD -t $if_name -d -c '{"runner": {"name": "'$mode'"}}'
+ for slave in "$@"; do
+ ip link set dev $slave down
+ ip link set dev $slave master $if_name
+ ip link set dev $slave up
+ done
+ ip link set dev $if_name up
+}
+
+team_destroy()
+{
+ local if_name=$1; shift
+
+ $TEAMD -t $if_name -k
+}
+
master_name_get()
{
local if_name=$1
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 2/5] selftests: forwarding: lib: Support team devices
@ 2018-07-30 14:39 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:39 UTC (permalink / raw)
Add team_create() and team_destroy() to manage team netdevices.
Signed-off-by: Petr Machata <petrm at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 81e36157bf16..3a4eba4f0d08 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -8,6 +8,7 @@
PING=${PING:=ping}
PING6=${PING6:=ping6}
MZ=${MZ:=mausezahn}
+TEAMD=${TEAMD:=teamd}
WAIT_TIME=${WAIT_TIME:=5}
PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no}
@@ -425,6 +426,28 @@ vlan_destroy()
ip link del dev $name
}
+team_create()
+{
+ local if_name=$1; shift
+ local mode=$1; shift
+
+ require_command $TEAMD
+ $TEAMD -t $if_name -d -c '{"runner": {"name": "'$mode'"}}'
+ for slave in "$@"; do
+ ip link set dev $slave down
+ ip link set dev $slave master $if_name
+ ip link set dev $slave up
+ done
+ ip link set dev $if_name up
+}
+
+team_destroy()
+{
+ local if_name=$1; shift
+
+ $TEAMD -t $if_name -k
+}
+
master_name_get()
{
local if_name=$1
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 3/5] selftests: forwarding: Introduce $ARPING
2018-07-30 14:37 ` petrm
(?)
@ 2018-07-30 14:39 ` petrm
-1 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:39 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
Instead of relying on "arping" being installed everywhere under that
name, introduce a variable $ARPING like the other tools do.
Convert an existing test, mirror_gre_vlan_bridge_1q.sh to
require_command $ARPING and then invoke arping through the variable.
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 1 +
tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh | 6 ++++--
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 3a4eba4f0d08..843a6715924f 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -8,6 +8,7 @@
PING=${PING:=ping}
PING6=${PING6:=ping6}
MZ=${MZ:=mausezahn}
+ARPING=${ARPING:=arping}
TEAMD=${TEAMD:=teamd}
WAIT_TIME=${WAIT_TIME:=5}
PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
index d3e75bb6a2d8..204b25f13934 100755
--- a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
@@ -28,6 +28,8 @@ source mirror_lib.sh
source mirror_gre_lib.sh
source mirror_gre_topo_lib.sh
+require_command $ARPING
+
setup_prepare()
{
h1=${NETIFS[p1]}
@@ -149,7 +151,7 @@ test_span_gre_forbidden_egress()
bridge vlan add dev $swp3 vid 555
# Re-prime FDB
- arping -I br1.555 192.0.2.130 -fqc 1
+ $ARPING -I br1.555 192.0.2.130 -fqc 1
sleep 1
quick_test_span_gre_dir $tundev ingress
@@ -223,7 +225,7 @@ test_span_gre_fdb_roaming()
bridge fdb del dev $swp2 $h3mac vlan 555 master
# Re-prime FDB
- arping -I br1.555 192.0.2.130 -fqc 1
+ $ARPING -I br1.555 192.0.2.130 -fqc 1
sleep 1
quick_test_span_gre_dir $tundev ingress
--
2.4.11
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 3/5] selftests: forwarding: Introduce $ARPING
@ 2018-07-30 14:39 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: petrm @ 2018-07-30 14:39 UTC (permalink / raw)
Instead of relying on "arping" being installed everywhere under that
name, introduce a variable $ARPING like the other tools do.
Convert an existing test, mirror_gre_vlan_bridge_1q.sh to
require_command $ARPING and then invoke arping through the variable.
Signed-off-by: Petr Machata <petrm at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 1 +
tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh | 6 ++++--
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 3a4eba4f0d08..843a6715924f 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -8,6 +8,7 @@
PING=${PING:=ping}
PING6=${PING6:=ping6}
MZ=${MZ:=mausezahn}
+ARPING=${ARPING:=arping}
TEAMD=${TEAMD:=teamd}
WAIT_TIME=${WAIT_TIME:=5}
PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
index d3e75bb6a2d8..204b25f13934 100755
--- a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
@@ -28,6 +28,8 @@ source mirror_lib.sh
source mirror_gre_lib.sh
source mirror_gre_topo_lib.sh
+require_command $ARPING
+
setup_prepare()
{
h1=${NETIFS[p1]}
@@ -149,7 +151,7 @@ test_span_gre_forbidden_egress()
bridge vlan add dev $swp3 vid 555
# Re-prime FDB
- arping -I br1.555 192.0.2.130 -fqc 1
+ $ARPING -I br1.555 192.0.2.130 -fqc 1
sleep 1
quick_test_span_gre_dir $tundev ingress
@@ -223,7 +225,7 @@ test_span_gre_fdb_roaming()
bridge fdb del dev $swp2 $h3mac vlan 555 master
# Re-prime FDB
- arping -I br1.555 192.0.2.130 -fqc 1
+ $ARPING -I br1.555 192.0.2.130 -fqc 1
sleep 1
quick_test_span_gre_dir $tundev ingress
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 3/5] selftests: forwarding: Introduce $ARPING
@ 2018-07-30 14:39 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:39 UTC (permalink / raw)
Instead of relying on "arping" being installed everywhere under that
name, introduce a variable $ARPING like the other tools do.
Convert an existing test, mirror_gre_vlan_bridge_1q.sh to
require_command $ARPING and then invoke arping through the variable.
Signed-off-by: Petr Machata <petrm at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 1 +
tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh | 6 ++++--
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 3a4eba4f0d08..843a6715924f 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -8,6 +8,7 @@
PING=${PING:=ping}
PING6=${PING6:=ping6}
MZ=${MZ:=mausezahn}
+ARPING=${ARPING:=arping}
TEAMD=${TEAMD:=teamd}
WAIT_TIME=${WAIT_TIME:=5}
PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
index d3e75bb6a2d8..204b25f13934 100755
--- a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
@@ -28,6 +28,8 @@ source mirror_lib.sh
source mirror_gre_lib.sh
source mirror_gre_topo_lib.sh
+require_command $ARPING
+
setup_prepare()
{
h1=${NETIFS[p1]}
@@ -149,7 +151,7 @@ test_span_gre_forbidden_egress()
bridge vlan add dev $swp3 vid 555
# Re-prime FDB
- arping -I br1.555 192.0.2.130 -fqc 1
+ $ARPING -I br1.555 192.0.2.130 -fqc 1
sleep 1
quick_test_span_gre_dir $tundev ingress
@@ -223,7 +225,7 @@ test_span_gre_fdb_roaming()
bridge fdb del dev $swp2 $h3mac vlan 555 master
# Re-prime FDB
- arping -I br1.555 192.0.2.130 -fqc 1
+ $ARPING -I br1.555 192.0.2.130 -fqc 1
sleep 1
quick_test_span_gre_dir $tundev ingress
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 4/5] selftests: forwarding: Test mirror-to-gretap w/ UL team
2018-07-30 14:37 ` petrm
(?)
@ 2018-07-30 14:40 ` petrm
-1 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:40 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
Test for "tc action mirred egress mirror" that mirrors to gretap when
the underlay route points at a VLAN-aware bridge (802.1q), and the
traffic egresses the bridge through a team device. Test upping and
downing individual team device slaves and verify the traffic flows as
expected.
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
.../net/forwarding/mirror_gre_bridge_1q_lag.sh | 283 +++++++++++++++++++++
1 file changed, 283 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
new file mode 100755
index 000000000000..61844caf671e
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
@@ -0,0 +1,283 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device with vlan filtering (802.1q), and the egress device is a team
+# device.
+#
+# +----------------------+ +----------------------+
+# | H1 | | H2 |
+# | + $h1.333 | | $h1.555 + |
+# | | 192.0.2.1/28 | | 192.0.2.18/28 | |
+# +-----|----------------+ +----------------|-----+
+# | $h1 |
+# +--------------------------------+------------------------------+
+# |
+# +--------------------------------------|------------------------------------+
+# | SW o---> mirror |
+# | | |
+# | +--------------------------------+------------------------------+ |
+# | | $swp1 | |
+# | + $swp1.333 $swp1.555 + |
+# | 192.0.2.2/28 192.0.2.17/28 |
+# | |
+# | +-----------------------------------------------------------------------+ |
+# | | BR1 (802.1q) | |
+# | | + lag (team) 192.0.2.129/28 | |
+# | | / \ 2001:db8:2::1/64 | |
+# | +---/---\---------------------------------------------------------------+ |
+# | / \ ^ |
+# | | \ + gt4 (gretap) | |
+# | | \ loc=192.0.2.129 | |
+# | | \ rem=192.0.2.130 -+ |
+# | | \ ttl=100 |
+# | | \ tos=inherit |
+# | | \ |
+# | | \_________________________________ |
+# | | \ |
+# | + $swp3 + $swp4 |
+# +---|------------------------------------------------|----------------------+
+# | |
+# +---|----------------------+ +---|----------------------+
+# | + $h3 H3 | | + $h4 H4 |
+# | 192.0.2.130/28 | | 192.0.2.130/28 |
+# | 2001:db8:2::2/64 | | 2001:db8:2::2/64 |
+# +--------------------------+ +--------------------------+
+
+ALL_TESTS="
+ test_mirror_gretap_first
+ test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+ local ips=("${@}")
+
+ vrf_create $vrf_name
+ ip link set dev $vrf_name up
+ vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+
+ vlan_destroy $if_name $vid
+ ip link set dev $vrf_name down
+ vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+ vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+ ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+ ip -4 route del 192.0.2.16/28 vrf vrf-h1
+ vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+ vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+ ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+ ip -4 route del 192.0.2.0/28 vrf vrf-h2
+ vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create()
+{
+ simple_if_init $h3 192.0.2.130/28
+ tc qdisc add dev $h3 clsact
+}
+
+h3_destroy()
+{
+ tc qdisc del dev $h3 clsact
+ simple_if_fini $h3 192.0.2.130/28
+}
+
+h4_create()
+{
+ simple_if_init $h4 192.0.2.130/28
+ tc qdisc add dev $h4 clsact
+}
+
+h4_destroy()
+{
+ tc qdisc del dev $h4 clsact
+ simple_if_fini $h4 192.0.2.130/28
+}
+
+switch_create()
+{
+ ip link set dev $swp1 up
+ tc qdisc add dev $swp1 clsact
+ vlan_create $swp1 333 "" 192.0.2.2/28
+ vlan_create $swp1 555 "" 192.0.2.17/28
+
+ tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+ ttl 100 tos inherit
+
+ ip link set dev $swp3 up
+ ip link set dev $swp4 up
+
+ ip link add name br1 type bridge vlan_filtering 1
+ ip link set dev br1 up
+ __addr_add_del br1 add 192.0.2.129/32
+ ip -4 route add 192.0.2.130/32 dev br1
+
+ team_create lag loadbalance $swp3 $swp4
+ ip link set dev lag master br1
+}
+
+switch_destroy()
+{
+ ip link set dev lag nomaster
+ team_destroy lag
+
+ ip -4 route del 192.0.2.130/32 dev br1
+ __addr_add_del br1 del 192.0.2.129/32
+ ip link set dev br1 down
+ ip link del dev br1
+
+ ip link set dev $swp4 down
+ ip link set dev $swp3 down
+
+ tunnel_destroy gt4
+
+ vlan_destroy $swp1 555
+ vlan_destroy $swp1 333
+ tc qdisc del dev $swp1 clsact
+ ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ swp3=${NETIFS[p3]}
+ h3=${NETIFS[p4]}
+
+ swp4=${NETIFS[p5]}
+ h4=${NETIFS[p6]}
+
+ vrf_prepare
+
+ ip link set dev $h1 up
+ h1_create
+ h2_create
+ h3_create
+ h4_create
+ switch_create
+
+ trap_install $h3 ingress
+ trap_install $h4 ingress
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ trap_uninstall $h4 ingress
+ trap_uninstall $h3 ingress
+
+ switch_destroy
+ h4_destroy
+ h3_destroy
+ h2_destroy
+ h1_destroy
+ ip link set dev $h1 down
+
+ vrf_cleanup
+}
+
+test_lag_slave()
+{
+ local host_dev=$1; shift
+ local up_dev=$1; shift
+ local down_dev=$1; shift
+ local what=$1; shift
+
+ RET=0
+
+ mirror_install $swp1 ingress gt4 \
+ "proto 802.1q flower vlan_id 333 $tcflags"
+
+ # Test connectivity through $up_dev when $down_dev is set down.
+ ip link set dev $down_dev down
+ setup_wait_dev $up_dev
+ setup_wait_dev $host_dev
+ $ARPING -I br1 192.0.2.130 -qfc 1
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $host_dev 1 10
+
+ # Test lack of connectivity when both slaves are down.
+ ip link set dev $up_dev down
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+
+ ip link set dev $up_dev up
+ ip link set dev $down_dev up
+ mirror_uninstall $swp1 ingress
+
+ log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+ test_lag_slave $h3 $swp3 $swp4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+ test_lag_slave $h4 $swp4 $swp3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+ slow_path_trap_install $swp1 ingress
+ slow_path_trap_install $swp1 egress
+
+ tests_run
+
+ slow_path_trap_uninstall $swp1 egress
+ slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+ echo "WARN: Could not test offloaded functionality"
+else
+ tcflags="skip_sw"
+ test_all
+fi
+
+exit $EXIT_STATUS
--
2.4.11
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 4/5] selftests: forwarding: Test mirror-to-gretap w/ UL team
@ 2018-07-30 14:40 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: petrm @ 2018-07-30 14:40 UTC (permalink / raw)
Test for "tc action mirred egress mirror" that mirrors to gretap when
the underlay route points at a VLAN-aware bridge (802.1q), and the
traffic egresses the bridge through a team device. Test upping and
downing individual team device slaves and verify the traffic flows as
expected.
Signed-off-by: Petr Machata <petrm at mellanox.com>
---
.../net/forwarding/mirror_gre_bridge_1q_lag.sh | 283 +++++++++++++++++++++
1 file changed, 283 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
new file mode 100755
index 000000000000..61844caf671e
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
@@ -0,0 +1,283 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device with vlan filtering (802.1q), and the egress device is a team
+# device.
+#
+# +----------------------+ +----------------------+
+# | H1 | | H2 |
+# | + $h1.333 | | $h1.555 + |
+# | | 192.0.2.1/28 | | 192.0.2.18/28 | |
+# +-----|----------------+ +----------------|-----+
+# | $h1 |
+# +--------------------------------+------------------------------+
+# |
+# +--------------------------------------|------------------------------------+
+# | SW o---> mirror |
+# | | |
+# | +--------------------------------+------------------------------+ |
+# | | $swp1 | |
+# | + $swp1.333 $swp1.555 + |
+# | 192.0.2.2/28 192.0.2.17/28 |
+# | |
+# | +-----------------------------------------------------------------------+ |
+# | | BR1 (802.1q) | |
+# | | + lag (team) 192.0.2.129/28 | |
+# | | / \ 2001:db8:2::1/64 | |
+# | +---/---\---------------------------------------------------------------+ |
+# | / \ ^ |
+# | | \ + gt4 (gretap) | |
+# | | \ loc=192.0.2.129 | |
+# | | \ rem=192.0.2.130 -+ |
+# | | \ ttl=100 |
+# | | \ tos=inherit |
+# | | \ |
+# | | \_________________________________ |
+# | | \ |
+# | + $swp3 + $swp4 |
+# +---|------------------------------------------------|----------------------+
+# | |
+# +---|----------------------+ +---|----------------------+
+# | + $h3 H3 | | + $h4 H4 |
+# | 192.0.2.130/28 | | 192.0.2.130/28 |
+# | 2001:db8:2::2/64 | | 2001:db8:2::2/64 |
+# +--------------------------+ +--------------------------+
+
+ALL_TESTS="
+ test_mirror_gretap_first
+ test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+ local ips=("${@}")
+
+ vrf_create $vrf_name
+ ip link set dev $vrf_name up
+ vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+
+ vlan_destroy $if_name $vid
+ ip link set dev $vrf_name down
+ vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+ vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+ ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+ ip -4 route del 192.0.2.16/28 vrf vrf-h1
+ vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+ vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+ ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+ ip -4 route del 192.0.2.0/28 vrf vrf-h2
+ vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create()
+{
+ simple_if_init $h3 192.0.2.130/28
+ tc qdisc add dev $h3 clsact
+}
+
+h3_destroy()
+{
+ tc qdisc del dev $h3 clsact
+ simple_if_fini $h3 192.0.2.130/28
+}
+
+h4_create()
+{
+ simple_if_init $h4 192.0.2.130/28
+ tc qdisc add dev $h4 clsact
+}
+
+h4_destroy()
+{
+ tc qdisc del dev $h4 clsact
+ simple_if_fini $h4 192.0.2.130/28
+}
+
+switch_create()
+{
+ ip link set dev $swp1 up
+ tc qdisc add dev $swp1 clsact
+ vlan_create $swp1 333 "" 192.0.2.2/28
+ vlan_create $swp1 555 "" 192.0.2.17/28
+
+ tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+ ttl 100 tos inherit
+
+ ip link set dev $swp3 up
+ ip link set dev $swp4 up
+
+ ip link add name br1 type bridge vlan_filtering 1
+ ip link set dev br1 up
+ __addr_add_del br1 add 192.0.2.129/32
+ ip -4 route add 192.0.2.130/32 dev br1
+
+ team_create lag loadbalance $swp3 $swp4
+ ip link set dev lag master br1
+}
+
+switch_destroy()
+{
+ ip link set dev lag nomaster
+ team_destroy lag
+
+ ip -4 route del 192.0.2.130/32 dev br1
+ __addr_add_del br1 del 192.0.2.129/32
+ ip link set dev br1 down
+ ip link del dev br1
+
+ ip link set dev $swp4 down
+ ip link set dev $swp3 down
+
+ tunnel_destroy gt4
+
+ vlan_destroy $swp1 555
+ vlan_destroy $swp1 333
+ tc qdisc del dev $swp1 clsact
+ ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ swp3=${NETIFS[p3]}
+ h3=${NETIFS[p4]}
+
+ swp4=${NETIFS[p5]}
+ h4=${NETIFS[p6]}
+
+ vrf_prepare
+
+ ip link set dev $h1 up
+ h1_create
+ h2_create
+ h3_create
+ h4_create
+ switch_create
+
+ trap_install $h3 ingress
+ trap_install $h4 ingress
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ trap_uninstall $h4 ingress
+ trap_uninstall $h3 ingress
+
+ switch_destroy
+ h4_destroy
+ h3_destroy
+ h2_destroy
+ h1_destroy
+ ip link set dev $h1 down
+
+ vrf_cleanup
+}
+
+test_lag_slave()
+{
+ local host_dev=$1; shift
+ local up_dev=$1; shift
+ local down_dev=$1; shift
+ local what=$1; shift
+
+ RET=0
+
+ mirror_install $swp1 ingress gt4 \
+ "proto 802.1q flower vlan_id 333 $tcflags"
+
+ # Test connectivity through $up_dev when $down_dev is set down.
+ ip link set dev $down_dev down
+ setup_wait_dev $up_dev
+ setup_wait_dev $host_dev
+ $ARPING -I br1 192.0.2.130 -qfc 1
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $host_dev 1 10
+
+ # Test lack of connectivity when both slaves are down.
+ ip link set dev $up_dev down
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+
+ ip link set dev $up_dev up
+ ip link set dev $down_dev up
+ mirror_uninstall $swp1 ingress
+
+ log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+ test_lag_slave $h3 $swp3 $swp4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+ test_lag_slave $h4 $swp4 $swp3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+ slow_path_trap_install $swp1 ingress
+ slow_path_trap_install $swp1 egress
+
+ tests_run
+
+ slow_path_trap_uninstall $swp1 egress
+ slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+ echo "WARN: Could not test offloaded functionality"
+else
+ tcflags="skip_sw"
+ test_all
+fi
+
+exit $EXIT_STATUS
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 4/5] selftests: forwarding: Test mirror-to-gretap w/ UL team
@ 2018-07-30 14:40 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:40 UTC (permalink / raw)
Test for "tc action mirred egress mirror" that mirrors to gretap when
the underlay route points at a VLAN-aware bridge (802.1q), and the
traffic egresses the bridge through a team device. Test upping and
downing individual team device slaves and verify the traffic flows as
expected.
Signed-off-by: Petr Machata <petrm at mellanox.com>
---
.../net/forwarding/mirror_gre_bridge_1q_lag.sh | 283 +++++++++++++++++++++
1 file changed, 283 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
new file mode 100755
index 000000000000..61844caf671e
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
@@ -0,0 +1,283 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device with vlan filtering (802.1q), and the egress device is a team
+# device.
+#
+# +----------------------+ +----------------------+
+# | H1 | | H2 |
+# | + $h1.333 | | $h1.555 + |
+# | | 192.0.2.1/28 | | 192.0.2.18/28 | |
+# +-----|----------------+ +----------------|-----+
+# | $h1 |
+# +--------------------------------+------------------------------+
+# |
+# +--------------------------------------|------------------------------------+
+# | SW o---> mirror |
+# | | |
+# | +--------------------------------+------------------------------+ |
+# | | $swp1 | |
+# | + $swp1.333 $swp1.555 + |
+# | 192.0.2.2/28 192.0.2.17/28 |
+# | |
+# | +-----------------------------------------------------------------------+ |
+# | | BR1 (802.1q) | |
+# | | + lag (team) 192.0.2.129/28 | |
+# | | / \ 2001:db8:2::1/64 | |
+# | +---/---\---------------------------------------------------------------+ |
+# | / \ ^ |
+# | | \ + gt4 (gretap) | |
+# | | \ loc=192.0.2.129 | |
+# | | \ rem=192.0.2.130 -+ |
+# | | \ ttl=100 |
+# | | \ tos=inherit |
+# | | \ |
+# | | \_________________________________ |
+# | | \ |
+# | + $swp3 + $swp4 |
+# +---|------------------------------------------------|----------------------+
+# | |
+# +---|----------------------+ +---|----------------------+
+# | + $h3 H3 | | + $h4 H4 |
+# | 192.0.2.130/28 | | 192.0.2.130/28 |
+# | 2001:db8:2::2/64 | | 2001:db8:2::2/64 |
+# +--------------------------+ +--------------------------+
+
+ALL_TESTS="
+ test_mirror_gretap_first
+ test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+ local ips=("${@}")
+
+ vrf_create $vrf_name
+ ip link set dev $vrf_name up
+ vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+
+ vlan_destroy $if_name $vid
+ ip link set dev $vrf_name down
+ vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+ vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+ ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+ ip -4 route del 192.0.2.16/28 vrf vrf-h1
+ vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+ vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+ ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+ ip -4 route del 192.0.2.0/28 vrf vrf-h2
+ vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create()
+{
+ simple_if_init $h3 192.0.2.130/28
+ tc qdisc add dev $h3 clsact
+}
+
+h3_destroy()
+{
+ tc qdisc del dev $h3 clsact
+ simple_if_fini $h3 192.0.2.130/28
+}
+
+h4_create()
+{
+ simple_if_init $h4 192.0.2.130/28
+ tc qdisc add dev $h4 clsact
+}
+
+h4_destroy()
+{
+ tc qdisc del dev $h4 clsact
+ simple_if_fini $h4 192.0.2.130/28
+}
+
+switch_create()
+{
+ ip link set dev $swp1 up
+ tc qdisc add dev $swp1 clsact
+ vlan_create $swp1 333 "" 192.0.2.2/28
+ vlan_create $swp1 555 "" 192.0.2.17/28
+
+ tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+ ttl 100 tos inherit
+
+ ip link set dev $swp3 up
+ ip link set dev $swp4 up
+
+ ip link add name br1 type bridge vlan_filtering 1
+ ip link set dev br1 up
+ __addr_add_del br1 add 192.0.2.129/32
+ ip -4 route add 192.0.2.130/32 dev br1
+
+ team_create lag loadbalance $swp3 $swp4
+ ip link set dev lag master br1
+}
+
+switch_destroy()
+{
+ ip link set dev lag nomaster
+ team_destroy lag
+
+ ip -4 route del 192.0.2.130/32 dev br1
+ __addr_add_del br1 del 192.0.2.129/32
+ ip link set dev br1 down
+ ip link del dev br1
+
+ ip link set dev $swp4 down
+ ip link set dev $swp3 down
+
+ tunnel_destroy gt4
+
+ vlan_destroy $swp1 555
+ vlan_destroy $swp1 333
+ tc qdisc del dev $swp1 clsact
+ ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ swp3=${NETIFS[p3]}
+ h3=${NETIFS[p4]}
+
+ swp4=${NETIFS[p5]}
+ h4=${NETIFS[p6]}
+
+ vrf_prepare
+
+ ip link set dev $h1 up
+ h1_create
+ h2_create
+ h3_create
+ h4_create
+ switch_create
+
+ trap_install $h3 ingress
+ trap_install $h4 ingress
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ trap_uninstall $h4 ingress
+ trap_uninstall $h3 ingress
+
+ switch_destroy
+ h4_destroy
+ h3_destroy
+ h2_destroy
+ h1_destroy
+ ip link set dev $h1 down
+
+ vrf_cleanup
+}
+
+test_lag_slave()
+{
+ local host_dev=$1; shift
+ local up_dev=$1; shift
+ local down_dev=$1; shift
+ local what=$1; shift
+
+ RET=0
+
+ mirror_install $swp1 ingress gt4 \
+ "proto 802.1q flower vlan_id 333 $tcflags"
+
+ # Test connectivity through $up_dev when $down_dev is set down.
+ ip link set dev $down_dev down
+ setup_wait_dev $up_dev
+ setup_wait_dev $host_dev
+ $ARPING -I br1 192.0.2.130 -qfc 1
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $host_dev 1 10
+
+ # Test lack of connectivity when both slaves are down.
+ ip link set dev $up_dev down
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+
+ ip link set dev $up_dev up
+ ip link set dev $down_dev up
+ mirror_uninstall $swp1 ingress
+
+ log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+ test_lag_slave $h3 $swp3 $swp4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+ test_lag_slave $h4 $swp4 $swp3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+ slow_path_trap_install $swp1 ingress
+ slow_path_trap_install $swp1 egress
+
+ tests_run
+
+ slow_path_trap_uninstall $swp1 egress
+ slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+ echo "WARN: Could not test offloaded functionality"
+else
+ tcflags="skip_sw"
+ test_all
+fi
+
+exit $EXIT_STATUS
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 5/5] selftests: forwarding: Test mirror-to-gretap w/ UL team LACP
2018-07-30 14:37 ` petrm
(?)
@ 2018-07-30 14:40 ` petrm
-1 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:40 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
This tests mirror-to-gretap when an underlay packet path includes a team
device which is not in loadbalance mode, but in LACP mode. The test
manipulates LAG membership to achieve changes in txability, thus making
sure that a driver that offloads mirror-to-gretap doesn't just consider
upness of a device.
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
.../net/forwarding/mirror_gre_lag_lacp.sh | 285 +++++++++++++++++++++
1 file changed, 285 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
new file mode 100755
index 000000000000..9edf4cb104a8
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
@@ -0,0 +1,285 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# team device.
+#
+# +----------------------+ +----------------------+
+# | H1 | | H2 |
+# | + $h1.333 | | $h1.555 + |
+# | | 192.0.2.1/28 | | 192.0.2.18/28 | |
+# +----|-----------------+ +----------------|-----+
+# | $h1 |
+# +---------------------------------+------------------------------+
+# |
+# +--------------------------------------|------------------------------------+
+# | SW o---> mirror |
+# | | |
+# | +----------------------------------+------------------------------+ |
+# | | $swp1 | |
+# | + $swp1.333 $swp1.555 + |
+# | 192.0.2.2/28 192.0.2.17/28 |
+# | |
+# | |
+# | + gt4 (gretap) ,-> + lag1 (team) |
+# | loc=192.0.2.129 | | 192.0.2.129/28 |
+# | rem=192.0.2.130 --' | |
+# | ttl=100 | |
+# | tos=inherit | |
+# | _____________________|______________________ |
+# | / \ |
+# | / \ |
+# | + $swp3 + $swp4 |
+# +---|------------------------------------------------|----------------------+
+# | |
+# +---|------------------------------------------------|----------------------+
+# | + $h3 + $h4 H3 |
+# | \ / |
+# | \____________________________________________/ |
+# | | |
+# | + lag2 (team) |
+# | 192.0.2.130/28 |
+# | |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+ test_mirror_gretap_first
+ test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+ local ips=("${@}")
+
+ vrf_create $vrf_name
+ ip link set dev $vrf_name up
+ vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+
+ vlan_destroy $if_name $vid
+ ip link set dev $vrf_name down
+ vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+ vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+ ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+ ip -4 route del 192.0.2.16/28 vrf vrf-h1
+ vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+ vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+ ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+ ip -4 route del 192.0.2.0/28 vrf vrf-h2
+ vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create_team()
+{
+ team_create lag2 lacp $h3 $h4
+ __simple_if_init lag2 vrf-h3 192.0.2.130/32
+ ip -4 route add vrf vrf-h3 192.0.2.129/32 dev lag2
+}
+
+h3_destroy_team()
+{
+ ip -4 route del vrf vrf-h3 192.0.2.129/32 dev lag2
+ __simple_if_fini lag2 192.0.2.130/32
+ team_destroy lag2
+
+ ip link set dev $h3 down
+ ip link set dev $h4 down
+}
+
+h3_create()
+{
+ vrf_create vrf-h3
+ ip link set dev vrf-h3 up
+ tc qdisc add dev $h3 clsact
+ tc qdisc add dev $h4 clsact
+ h3_create_team
+}
+
+h3_destroy()
+{
+ h3_destroy_team
+ tc qdisc del dev $h4 clsact
+ tc qdisc del dev $h3 clsact
+ ip link set dev vrf-h3 down
+ vrf_destroy vrf-h3
+}
+
+switch_create()
+{
+ ip link set dev $swp1 up
+ tc qdisc add dev $swp1 clsact
+ vlan_create $swp1 333 "" 192.0.2.2/28
+ vlan_create $swp1 555 "" 192.0.2.17/28
+
+ tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+ ttl 100 tos inherit
+
+ ip link set dev $swp3 up
+ ip link set dev $swp4 up
+ team_create lag1 lacp $swp3 $swp4
+ __addr_add_del lag1 add 192.0.2.129/32
+ ip -4 route add 192.0.2.130/32 dev lag1
+}
+
+switch_destroy()
+{
+ ip -4 route del 192.0.2.130/32 dev lag1
+ __addr_add_del lag1 del 192.0.2.129/32
+ team_destroy lag1
+
+ ip link set dev $swp4 down
+ ip link set dev $swp3 down
+
+ tunnel_destroy gt4
+
+ vlan_destroy $swp1 555
+ vlan_destroy $swp1 333
+ tc qdisc del dev $swp1 clsact
+ ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ swp3=${NETIFS[p3]}
+ h3=${NETIFS[p4]}
+
+ swp4=${NETIFS[p5]}
+ h4=${NETIFS[p6]}
+
+ vrf_prepare
+
+ ip link set dev $h1 up
+ h1_create
+ h2_create
+ h3_create
+ switch_create
+
+ trap_install $h3 ingress
+ trap_install $h4 ingress
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ trap_uninstall $h4 ingress
+ trap_uninstall $h3 ingress
+
+ switch_destroy
+ h3_destroy
+ h2_destroy
+ h1_destroy
+ ip link set dev $h1 down
+
+ vrf_cleanup
+}
+
+test_lag_slave()
+{
+ local up_dev=$1; shift
+ local down_dev=$1; shift
+ local what=$1; shift
+
+ RET=0
+
+ mirror_install $swp1 ingress gt4 \
+ "proto 802.1q flower vlan_id 333 $tcflags"
+
+ # Move $down_dev away from the team. That will prompt change in
+ # txability of the connected device, without changing its upness. The
+ # driver should notice the txability change and move the traffic to the
+ # other slave.
+ ip link set dev $down_dev nomaster
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $up_dev 1 10
+
+ # Test lack of connectivity when neither slave is txable.
+ ip link set dev $up_dev nomaster
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+ mirror_uninstall $swp1 ingress
+
+ # Recreate H3's team device, because mlxsw, which this test is
+ # predominantly mean to test, requires a bottom-up construction and
+ # doesn't allow enslavement to a device that already has an upper.
+ h3_destroy_team
+ h3_create_team
+ # Wait for ${h,swp}{3,4}.
+ setup_wait
+
+ log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+ test_lag_slave $h3 $h4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+ test_lag_slave $h4 $h3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+ slow_path_trap_install $swp1 ingress
+ slow_path_trap_install $swp1 egress
+
+ tests_run
+
+ slow_path_trap_uninstall $swp1 egress
+ slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+ echo "WARN: Could not test offloaded functionality"
+else
+ tcflags="skip_sw"
+ test_all
+fi
+
+exit $EXIT_STATUS
--
2.4.11
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 5/5] selftests: forwarding: Test mirror-to-gretap w/ UL team LACP
@ 2018-07-30 14:40 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: petrm @ 2018-07-30 14:40 UTC (permalink / raw)
This tests mirror-to-gretap when an underlay packet path includes a team
device which is not in loadbalance mode, but in LACP mode. The test
manipulates LAG membership to achieve changes in txability, thus making
sure that a driver that offloads mirror-to-gretap doesn't just consider
upness of a device.
Signed-off-by: Petr Machata <petrm at mellanox.com>
---
.../net/forwarding/mirror_gre_lag_lacp.sh | 285 +++++++++++++++++++++
1 file changed, 285 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
new file mode 100755
index 000000000000..9edf4cb104a8
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
@@ -0,0 +1,285 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# team device.
+#
+# +----------------------+ +----------------------+
+# | H1 | | H2 |
+# | + $h1.333 | | $h1.555 + |
+# | | 192.0.2.1/28 | | 192.0.2.18/28 | |
+# +----|-----------------+ +----------------|-----+
+# | $h1 |
+# +---------------------------------+------------------------------+
+# |
+# +--------------------------------------|------------------------------------+
+# | SW o---> mirror |
+# | | |
+# | +----------------------------------+------------------------------+ |
+# | | $swp1 | |
+# | + $swp1.333 $swp1.555 + |
+# | 192.0.2.2/28 192.0.2.17/28 |
+# | |
+# | |
+# | + gt4 (gretap) ,-> + lag1 (team) |
+# | loc=192.0.2.129 | | 192.0.2.129/28 |
+# | rem=192.0.2.130 --' | |
+# | ttl=100 | |
+# | tos=inherit | |
+# | _____________________|______________________ |
+# | / \ |
+# | / \ |
+# | + $swp3 + $swp4 |
+# +---|------------------------------------------------|----------------------+
+# | |
+# +---|------------------------------------------------|----------------------+
+# | + $h3 + $h4 H3 |
+# | \ / |
+# | \____________________________________________/ |
+# | | |
+# | + lag2 (team) |
+# | 192.0.2.130/28 |
+# | |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+ test_mirror_gretap_first
+ test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+ local ips=("${@}")
+
+ vrf_create $vrf_name
+ ip link set dev $vrf_name up
+ vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+
+ vlan_destroy $if_name $vid
+ ip link set dev $vrf_name down
+ vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+ vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+ ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+ ip -4 route del 192.0.2.16/28 vrf vrf-h1
+ vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+ vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+ ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+ ip -4 route del 192.0.2.0/28 vrf vrf-h2
+ vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create_team()
+{
+ team_create lag2 lacp $h3 $h4
+ __simple_if_init lag2 vrf-h3 192.0.2.130/32
+ ip -4 route add vrf vrf-h3 192.0.2.129/32 dev lag2
+}
+
+h3_destroy_team()
+{
+ ip -4 route del vrf vrf-h3 192.0.2.129/32 dev lag2
+ __simple_if_fini lag2 192.0.2.130/32
+ team_destroy lag2
+
+ ip link set dev $h3 down
+ ip link set dev $h4 down
+}
+
+h3_create()
+{
+ vrf_create vrf-h3
+ ip link set dev vrf-h3 up
+ tc qdisc add dev $h3 clsact
+ tc qdisc add dev $h4 clsact
+ h3_create_team
+}
+
+h3_destroy()
+{
+ h3_destroy_team
+ tc qdisc del dev $h4 clsact
+ tc qdisc del dev $h3 clsact
+ ip link set dev vrf-h3 down
+ vrf_destroy vrf-h3
+}
+
+switch_create()
+{
+ ip link set dev $swp1 up
+ tc qdisc add dev $swp1 clsact
+ vlan_create $swp1 333 "" 192.0.2.2/28
+ vlan_create $swp1 555 "" 192.0.2.17/28
+
+ tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+ ttl 100 tos inherit
+
+ ip link set dev $swp3 up
+ ip link set dev $swp4 up
+ team_create lag1 lacp $swp3 $swp4
+ __addr_add_del lag1 add 192.0.2.129/32
+ ip -4 route add 192.0.2.130/32 dev lag1
+}
+
+switch_destroy()
+{
+ ip -4 route del 192.0.2.130/32 dev lag1
+ __addr_add_del lag1 del 192.0.2.129/32
+ team_destroy lag1
+
+ ip link set dev $swp4 down
+ ip link set dev $swp3 down
+
+ tunnel_destroy gt4
+
+ vlan_destroy $swp1 555
+ vlan_destroy $swp1 333
+ tc qdisc del dev $swp1 clsact
+ ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ swp3=${NETIFS[p3]}
+ h3=${NETIFS[p4]}
+
+ swp4=${NETIFS[p5]}
+ h4=${NETIFS[p6]}
+
+ vrf_prepare
+
+ ip link set dev $h1 up
+ h1_create
+ h2_create
+ h3_create
+ switch_create
+
+ trap_install $h3 ingress
+ trap_install $h4 ingress
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ trap_uninstall $h4 ingress
+ trap_uninstall $h3 ingress
+
+ switch_destroy
+ h3_destroy
+ h2_destroy
+ h1_destroy
+ ip link set dev $h1 down
+
+ vrf_cleanup
+}
+
+test_lag_slave()
+{
+ local up_dev=$1; shift
+ local down_dev=$1; shift
+ local what=$1; shift
+
+ RET=0
+
+ mirror_install $swp1 ingress gt4 \
+ "proto 802.1q flower vlan_id 333 $tcflags"
+
+ # Move $down_dev away from the team. That will prompt change in
+ # txability of the connected device, without changing its upness. The
+ # driver should notice the txability change and move the traffic to the
+ # other slave.
+ ip link set dev $down_dev nomaster
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $up_dev 1 10
+
+ # Test lack of connectivity when neither slave is txable.
+ ip link set dev $up_dev nomaster
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+ mirror_uninstall $swp1 ingress
+
+ # Recreate H3's team device, because mlxsw, which this test is
+ # predominantly mean to test, requires a bottom-up construction and
+ # doesn't allow enslavement to a device that already has an upper.
+ h3_destroy_team
+ h3_create_team
+ # Wait for ${h,swp}{3,4}.
+ setup_wait
+
+ log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+ test_lag_slave $h3 $h4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+ test_lag_slave $h4 $h3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+ slow_path_trap_install $swp1 ingress
+ slow_path_trap_install $swp1 egress
+
+ tests_run
+
+ slow_path_trap_uninstall $swp1 egress
+ slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+ echo "WARN: Could not test offloaded functionality"
+else
+ tcflags="skip_sw"
+ test_all
+fi
+
+exit $EXIT_STATUS
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next 5/5] selftests: forwarding: Test mirror-to-gretap w/ UL team LACP
@ 2018-07-30 14:40 ` petrm
0 siblings, 0 replies; 21+ messages in thread
From: Petr Machata @ 2018-07-30 14:40 UTC (permalink / raw)
This tests mirror-to-gretap when an underlay packet path includes a team
device which is not in loadbalance mode, but in LACP mode. The test
manipulates LAG membership to achieve changes in txability, thus making
sure that a driver that offloads mirror-to-gretap doesn't just consider
upness of a device.
Signed-off-by: Petr Machata <petrm at mellanox.com>
---
.../net/forwarding/mirror_gre_lag_lacp.sh | 285 +++++++++++++++++++++
1 file changed, 285 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
new file mode 100755
index 000000000000..9edf4cb104a8
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
@@ -0,0 +1,285 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# team device.
+#
+# +----------------------+ +----------------------+
+# | H1 | | H2 |
+# | + $h1.333 | | $h1.555 + |
+# | | 192.0.2.1/28 | | 192.0.2.18/28 | |
+# +----|-----------------+ +----------------|-----+
+# | $h1 |
+# +---------------------------------+------------------------------+
+# |
+# +--------------------------------------|------------------------------------+
+# | SW o---> mirror |
+# | | |
+# | +----------------------------------+------------------------------+ |
+# | | $swp1 | |
+# | + $swp1.333 $swp1.555 + |
+# | 192.0.2.2/28 192.0.2.17/28 |
+# | |
+# | |
+# | + gt4 (gretap) ,-> + lag1 (team) |
+# | loc=192.0.2.129 | | 192.0.2.129/28 |
+# | rem=192.0.2.130 --' | |
+# | ttl=100 | |
+# | tos=inherit | |
+# | _____________________|______________________ |
+# | / \ |
+# | / \ |
+# | + $swp3 + $swp4 |
+# +---|------------------------------------------------|----------------------+
+# | |
+# +---|------------------------------------------------|----------------------+
+# | + $h3 + $h4 H3 |
+# | \ / |
+# | \____________________________________________/ |
+# | | |
+# | + lag2 (team) |
+# | 192.0.2.130/28 |
+# | |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+ test_mirror_gretap_first
+ test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+ local ips=("${@}")
+
+ vrf_create $vrf_name
+ ip link set dev $vrf_name up
+ vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+ local if_name=$1; shift
+ local vid=$1; shift
+ local vrf_name=$1; shift
+
+ vlan_destroy $if_name $vid
+ ip link set dev $vrf_name down
+ vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+ vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+ ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+ ip -4 route del 192.0.2.16/28 vrf vrf-h1
+ vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+ vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+ ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+ ip -4 route del 192.0.2.0/28 vrf vrf-h2
+ vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create_team()
+{
+ team_create lag2 lacp $h3 $h4
+ __simple_if_init lag2 vrf-h3 192.0.2.130/32
+ ip -4 route add vrf vrf-h3 192.0.2.129/32 dev lag2
+}
+
+h3_destroy_team()
+{
+ ip -4 route del vrf vrf-h3 192.0.2.129/32 dev lag2
+ __simple_if_fini lag2 192.0.2.130/32
+ team_destroy lag2
+
+ ip link set dev $h3 down
+ ip link set dev $h4 down
+}
+
+h3_create()
+{
+ vrf_create vrf-h3
+ ip link set dev vrf-h3 up
+ tc qdisc add dev $h3 clsact
+ tc qdisc add dev $h4 clsact
+ h3_create_team
+}
+
+h3_destroy()
+{
+ h3_destroy_team
+ tc qdisc del dev $h4 clsact
+ tc qdisc del dev $h3 clsact
+ ip link set dev vrf-h3 down
+ vrf_destroy vrf-h3
+}
+
+switch_create()
+{
+ ip link set dev $swp1 up
+ tc qdisc add dev $swp1 clsact
+ vlan_create $swp1 333 "" 192.0.2.2/28
+ vlan_create $swp1 555 "" 192.0.2.17/28
+
+ tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+ ttl 100 tos inherit
+
+ ip link set dev $swp3 up
+ ip link set dev $swp4 up
+ team_create lag1 lacp $swp3 $swp4
+ __addr_add_del lag1 add 192.0.2.129/32
+ ip -4 route add 192.0.2.130/32 dev lag1
+}
+
+switch_destroy()
+{
+ ip -4 route del 192.0.2.130/32 dev lag1
+ __addr_add_del lag1 del 192.0.2.129/32
+ team_destroy lag1
+
+ ip link set dev $swp4 down
+ ip link set dev $swp3 down
+
+ tunnel_destroy gt4
+
+ vlan_destroy $swp1 555
+ vlan_destroy $swp1 333
+ tc qdisc del dev $swp1 clsact
+ ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ swp3=${NETIFS[p3]}
+ h3=${NETIFS[p4]}
+
+ swp4=${NETIFS[p5]}
+ h4=${NETIFS[p6]}
+
+ vrf_prepare
+
+ ip link set dev $h1 up
+ h1_create
+ h2_create
+ h3_create
+ switch_create
+
+ trap_install $h3 ingress
+ trap_install $h4 ingress
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ trap_uninstall $h4 ingress
+ trap_uninstall $h3 ingress
+
+ switch_destroy
+ h3_destroy
+ h2_destroy
+ h1_destroy
+ ip link set dev $h1 down
+
+ vrf_cleanup
+}
+
+test_lag_slave()
+{
+ local up_dev=$1; shift
+ local down_dev=$1; shift
+ local what=$1; shift
+
+ RET=0
+
+ mirror_install $swp1 ingress gt4 \
+ "proto 802.1q flower vlan_id 333 $tcflags"
+
+ # Move $down_dev away from the team. That will prompt change in
+ # txability of the connected device, without changing its upness. The
+ # driver should notice the txability change and move the traffic to the
+ # other slave.
+ ip link set dev $down_dev nomaster
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $up_dev 1 10
+
+ # Test lack of connectivity when neither slave is txable.
+ ip link set dev $up_dev nomaster
+ sleep 2
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+ mirror_uninstall $swp1 ingress
+
+ # Recreate H3's team device, because mlxsw, which this test is
+ # predominantly mean to test, requires a bottom-up construction and
+ # doesn't allow enslavement to a device that already has an upper.
+ h3_destroy_team
+ h3_create_team
+ # Wait for ${h,swp}{3,4}.
+ setup_wait
+
+ log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+ test_lag_slave $h3 $h4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+ test_lag_slave $h4 $h3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+ slow_path_trap_install $swp1 ingress
+ slow_path_trap_install $swp1 egress
+
+ tests_run
+
+ slow_path_trap_uninstall $swp1 egress
+ slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+ echo "WARN: Could not test offloaded functionality"
+else
+ tcflags="skip_sw"
+ test_all
+fi
+
+exit $EXIT_STATUS
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH net-next 0/5] A test for mirror-to-gretap with team in UL packet path
2018-07-30 14:37 ` petrm
(?)
@ 2018-07-30 16:48 ` davem
-1 siblings, 0 replies; 21+ messages in thread
From: David Miller @ 2018-07-30 16:48 UTC (permalink / raw)
To: petrm; +Cc: netdev, linux-kselftest, shuah
From: Petr Machata <petrm@mellanox.com>
Date: Mon, 30 Jul 2018 16:37:17 +0200
> This patchset adds a test for "tc action mirred mirror" where the
> mirrored-to device is a gretap, and underlay path contains a team
> device.
>
> In patch #1 require_command() is added, which should henceforth be used
> to declare dependence on a certain tool.
>
> In patch #2, two new functions, team_create() and team_destroy(), are
> added to lib.sh.
>
> The newly-added test uses arping, which isn't necessarily available.
> Therefore patch #3 introduces $ARPING, and a preexisting test is fixed
> to require_command $ARPING.
>
> In patches #4 and #5, two new tests are added. In both cases, a team
> device is on egress path of a mirrored packet in a mirror-to-gretap
> scenario. In the first one, the team device is in loadbalance mode, in
> the second one it's in lacp mode. (The difference in modes necessitates
> a different testing strategy, hence two test cases instead of just
> parameterizing one.)
I always like seeing new test cases. :)
Series applied, thanks.
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH net-next 0/5] A test for mirror-to-gretap with team in UL packet path
@ 2018-07-30 16:48 ` davem
0 siblings, 0 replies; 21+ messages in thread
From: davem @ 2018-07-30 16:48 UTC (permalink / raw)
From: Petr Machata <petrm at mellanox.com>
Date: Mon, 30 Jul 2018 16:37:17 +0200
> This patchset adds a test for "tc action mirred mirror" where the
> mirrored-to device is a gretap, and underlay path contains a team
> device.
>
> In patch #1 require_command() is added, which should henceforth be used
> to declare dependence on a certain tool.
>
> In patch #2, two new functions, team_create() and team_destroy(), are
> added to lib.sh.
>
> The newly-added test uses arping, which isn't necessarily available.
> Therefore patch #3 introduces $ARPING, and a preexisting test is fixed
> to require_command $ARPING.
>
> In patches #4 and #5, two new tests are added. In both cases, a team
> device is on egress path of a mirrored packet in a mirror-to-gretap
> scenario. In the first one, the team device is in loadbalance mode, in
> the second one it's in lacp mode. (The difference in modes necessitates
> a different testing strategy, hence two test cases instead of just
> parameterizing one.)
I always like seeing new test cases. :)
Series applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH net-next 0/5] A test for mirror-to-gretap with team in UL packet path
@ 2018-07-30 16:48 ` davem
0 siblings, 0 replies; 21+ messages in thread
From: David Miller @ 2018-07-30 16:48 UTC (permalink / raw)
From: Petr Machata <petrm@mellanox.com>
Date: Mon, 30 Jul 2018 16:37:17 +0200
> This patchset adds a test for "tc action mirred mirror" where the
> mirrored-to device is a gretap, and underlay path contains a team
> device.
>
> In patch #1 require_command() is added, which should henceforth be used
> to declare dependence on a certain tool.
>
> In patch #2, two new functions, team_create() and team_destroy(), are
> added to lib.sh.
>
> The newly-added test uses arping, which isn't necessarily available.
> Therefore patch #3 introduces $ARPING, and a preexisting test is fixed
> to require_command $ARPING.
>
> In patches #4 and #5, two new tests are added. In both cases, a team
> device is on egress path of a mirrored packet in a mirror-to-gretap
> scenario. In the first one, the team device is in loadbalance mode, in
> the second one it's in lacp mode. (The difference in modes necessitates
> a different testing strategy, hence two test cases instead of just
> parameterizing one.)
I always like seeing new test cases. :)
Series applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2018-07-30 18:24 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-30 14:37 [PATCH net-next 0/5] A test for mirror-to-gretap with team in UL packet path Petr Machata
2018-07-30 14:37 ` Petr Machata
2018-07-30 14:37 ` petrm
2018-07-30 14:39 ` [PATCH net-next 1/5] selftests: forwarding: lib: Add require_command() Petr Machata
2018-07-30 14:39 ` Petr Machata
2018-07-30 14:39 ` petrm
2018-07-30 14:39 ` [PATCH net-next 2/5] selftests: forwarding: lib: Support team devices Petr Machata
2018-07-30 14:39 ` Petr Machata
2018-07-30 14:39 ` petrm
2018-07-30 14:39 ` [PATCH net-next 3/5] selftests: forwarding: Introduce $ARPING Petr Machata
2018-07-30 14:39 ` Petr Machata
2018-07-30 14:39 ` petrm
2018-07-30 14:40 ` [PATCH net-next 4/5] selftests: forwarding: Test mirror-to-gretap w/ UL team Petr Machata
2018-07-30 14:40 ` Petr Machata
2018-07-30 14:40 ` petrm
2018-07-30 14:40 ` [PATCH net-next 5/5] selftests: forwarding: Test mirror-to-gretap w/ UL team LACP Petr Machata
2018-07-30 14:40 ` Petr Machata
2018-07-30 14:40 ` petrm
2018-07-30 16:48 ` [PATCH net-next 0/5] A test for mirror-to-gretap with team in UL packet path David Miller
2018-07-30 16:48 ` David Miller
2018-07-30 16:48 ` davem
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.