* [U-Boot] [PATCH] board: arm: Add support for Broadcom BCM7260
@ 2018-08-17 1:44 Thomas Fitzsimmons
2018-08-18 16:21 ` Florian Fainelli
2018-08-22 22:37 ` [U-Boot] [PATCH v2 0/2] " Thomas Fitzsimmons
0 siblings, 2 replies; 8+ messages in thread
From: Thomas Fitzsimmons @ 2018-08-17 1:44 UTC (permalink / raw)
To: u-boot
Add support for loading U-Boot on the Broadcom 7260 SoC. This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.
Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
---
arch/arm/mach-bcmstb/Kconfig | 13 ++++++++++---
configs/bcm7260_defconfig | 23 +++++++++++++++++++++++
include/configs/bcm7260.h | 35 +++++++++++++++++++++++++++++++++++
include/configs/bcmstb.h | 10 ++++++++--
4 files changed, 76 insertions(+), 5 deletions(-)
create mode 100644 configs/bcm7260_defconfig
create mode 100644 include/configs/bcm7260.h
diff --git a/arch/arm/mach-bcmstb/Kconfig b/arch/arm/mach-bcmstb/Kconfig
index 6c7952f..0a56c3c 100644
--- a/arch/arm/mach-bcmstb/Kconfig
+++ b/arch/arm/mach-bcmstb/Kconfig
@@ -7,8 +7,14 @@ config TARGET_BCM7445
Support for the Broadcom 7445 SoC. This port assumes BOLT
is acting as the second stage bootloader, and U-Boot is
acting as the third stage bootloader (TSBL), loaded by BOLT.
- This port may work on other BCM7xxx boards with
- configuration changes.
+
+config TARGET_BCM7260
+ bool "Broadcom 7260 TSBL"
+ depends on ARCH_BCMSTB
+ help
+ Support for the Broadcom 7260 SoC. This port assumes BOLT
+ is acting as the second stage bootloader, and U-Boot is
+ acting as the third stage bootloader (TSBL), loaded by BOLT.
config SYS_CPU
default "armv7"
@@ -23,7 +29,8 @@ config SYS_SOC
default "bcmstb"
config SYS_CONFIG_NAME
- default "bcm7445"
+ default "bcm7445" if TARGET_BCM7445
+ default "bcm7260" if TARGET_BCM7260
config SYS_FDT_SAVE_ADDRESS
hex "Address to which the prior stage provided DTB will be copied"
diff --git a/configs/bcm7260_defconfig b/configs/bcm7260_defconfig
new file mode 100644
index 0000000..a04f700
--- /dev/null
+++ b/configs/bcm7260_defconfig
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCMSTB=y
+CONFIG_TARGET_BCM7260=y
+CONFIG_USE_PRIVATE_LIBGCC=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_PRIOR_STAGE=y
+CONFIG_DM=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_RSA=y
+CONFIG_BLK=n
+CONFIG_SDHCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_BCMSTB=y
+CONFIG_CONS_INDEX=3
+CONFIG_BOOTDELAY=1
+CONFIG_SYS_PROMPT="U-Boot>"
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_TEXT_BASE=0x10100000
+CONFIG_SYS_NS16550_COM3=0xf040c000
+CONFIG_EFI_LOADER=n
+CONFIG_EFI_PARTITION=y
diff --git a/include/configs/bcm7260.h b/include/configs/bcm7260.h
new file mode 100644
index 0000000..1a5eab1
--- /dev/null
+++ b/include/configs/bcm7260.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018 Cisco Systems, Inc.
+ *
+ * Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
+ *
+ * Configuration settings for the Broadcom BCM7260 SoC family.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SYS_NS16550_COM3 0xf040c000
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_TEXT_BASE 0x10100000
+#define CONFIG_SYS_INIT_RAM_ADDR 0x10200000
+
+#define CONFIG_SYS_MALLOC_LEN ((40 * 1024) << 10) /* 40 MiB */
+
+#include "bcmstb.h"
+
+#define BCMSTB_SDHCI_BASE 0xf0200300
+#define BCMSTB_TIMER_LOW 0xf0412008
+#define BCMSTB_TIMER_HIGH 0xf041200c
+#define BCMSTB_TIMER_FREQUENCY 0xf0412020
+#define BCMSTB_HIF_MSPI_BASE 0xf0203c00
+#define BCMSTB_BSPI_BASE 0xf0203a00
+#define BCMSTB_HIF_SPI_INTR2 0xf0201a00
+#define BCMSTB_CS_REG 0xf0200920
+
+#define CONFIG_CMD_GPT
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h
index c74fe40..2dcefb8 100644
--- a/include/configs/bcmstb.h
+++ b/include/configs/bcmstb.h
@@ -158,9 +158,15 @@ extern phys_addr_t prior_stage_fdt_address;
*/
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET 0x1e0000
#define CONFIG_ENV_SIZE (64 << 10) /* 64 KiB */
-#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+#if defined(CONFIG_ENV_IS_IN_MMC)
+# define CONFIG_SYS_MMC_ENV_DEV 0
+# define CONFIG_SYS_MMC_ENV_PART 0
+# define CONFIG_ENV_OFFSET (0x000040a4 * 512)
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+# define CONFIG_ENV_OFFSET 0x1e0000
+# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+#endif
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_ENV_OVERWRITE
--
1.8.3.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH] board: arm: Add support for Broadcom BCM7260
2018-08-17 1:44 [U-Boot] [PATCH] board: arm: Add support for Broadcom BCM7260 Thomas Fitzsimmons
@ 2018-08-18 16:21 ` Florian Fainelli
2018-08-23 1:07 ` Thomas Fitzsimmons
2018-08-22 22:37 ` [U-Boot] [PATCH v2 0/2] " Thomas Fitzsimmons
1 sibling, 1 reply; 8+ messages in thread
From: Florian Fainelli @ 2018-08-18 16:21 UTC (permalink / raw)
To: u-boot
On 08/16/2018 06:44 PM, Thomas Fitzsimmons wrote:
> Add support for loading U-Boot on the Broadcom 7260 SoC. This port
> assumes Broadcom's BOLT bootloader is acting as the second stage
> bootloader, and U-Boot is acting as the third stage bootloader, loaded
> as an ELF program by BOLT.
>
> Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Looks good to me given the structured you added earlier for 7445
support, just one nit below:
[snip]
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#define CONFIG_SYS_NS16550_COM3 0xf040c000
This is the physical address of UARTA, there are typically 3 UARTs on
those SoCs, is there a reason to name this COM3 and not COM1? If this is
an established u-boot convention, pardon my ignore here.
--
Florian
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 0/2] board: arm: Add support for Broadcom BCM7260
2018-08-17 1:44 [U-Boot] [PATCH] board: arm: Add support for Broadcom BCM7260 Thomas Fitzsimmons
2018-08-18 16:21 ` Florian Fainelli
@ 2018-08-22 22:37 ` Thomas Fitzsimmons
2018-08-22 22:37 ` [U-Boot] [PATCH v2 1/2] arm: bcm7445: Change serial console index Thomas Fitzsimmons
2018-08-22 22:37 ` [U-Boot] [PATCH v2 2/2] board: arm: Add support for Broadcom BCM7260 Thomas Fitzsimmons
1 sibling, 2 replies; 8+ messages in thread
From: Thomas Fitzsimmons @ 2018-08-22 22:37 UTC (permalink / raw)
To: u-boot
Add support for loading U-Boot on the Broadcom 7260 SoC. The first
patch in this series reorganizes the BCM7445 configury to make way for
BCM7260.
Thomas Fitzsimmons (2):
arm: bcm7445: Change serial console index
board: arm: Add support for Broadcom BCM7260
MAINTAINERS | 2 +-
arch/arm/mach-bcmstb/Kconfig | 13 ++++++++++---
board/broadcom/bcmstb/MAINTAINERS | 8 ++++++++
configs/bcm7260_defconfig | 17 +++++++++++++++++
configs/bcm7445_defconfig | 8 ++++----
include/configs/bcm7260.h | 40 +++++++++++++++++++++++++++++++++++++++
include/configs/bcm7445.h | 9 +++++++--
include/configs/bcmstb.h | 4 ----
8 files changed, 87 insertions(+), 14 deletions(-)
create mode 100644 configs/bcm7260_defconfig
create mode 100644 include/configs/bcm7260.h
--
1.8.3.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 1/2] arm: bcm7445: Change serial console index
2018-08-22 22:37 ` [U-Boot] [PATCH v2 0/2] " Thomas Fitzsimmons
@ 2018-08-22 22:37 ` Thomas Fitzsimmons
2018-09-11 12:26 ` [U-Boot] [U-Boot, v2, " Tom Rini
2018-08-22 22:37 ` [U-Boot] [PATCH v2 2/2] board: arm: Add support for Broadcom BCM7260 Thomas Fitzsimmons
1 sibling, 1 reply; 8+ messages in thread
From: Thomas Fitzsimmons @ 2018-08-22 22:37 UTC (permalink / raw)
To: u-boot
Change the configured serial console index to reflect that it is the
first physical UART, reorder some defconfig lines and move some
environment configuration from bcmstb.h to bcm7445.h.
Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
---
Changes for v2:
- Rebase to master tip
- Change serial console index
- Reorder defconfig lines
- Move some environment configuration to bcm7445.h
configs/bcm7445_defconfig | 8 ++++----
include/configs/bcm7445.h | 9 +++++++--
include/configs/bcmstb.h | 4 ----
3 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/configs/bcm7445_defconfig b/configs/bcm7445_defconfig
index 59c745f..cb15226 100644
--- a/configs/bcm7445_defconfig
+++ b/configs/bcm7445_defconfig
@@ -12,10 +12,10 @@ CONFIG_OF_PRIOR_STAGE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_BCMSTB=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
-CONFIG_CONS_INDEX=3
+CONFIG_CONS_INDEX=1
+CONFIG_EFI_LOADER=n
CONFIG_SPI=y
+CONFIG_SPI_FLASH=y
CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_BCMSTB_SPI=y
-# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/bcm7445.h b/include/configs/bcm7445.h
index f34cf2d..8c675f7 100644
--- a/include/configs/bcm7445.h
+++ b/include/configs/bcm7445.h
@@ -10,7 +10,7 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_SYS_NS16550_COM3 0xf040ab00
+#define CONFIG_SYS_NS16550_COM1 0xf040ab00
#define CONFIG_SYS_TEXT_BASE 0x80100000
#define CONFIG_SYS_INIT_RAM_ADDR 0x80200000
@@ -28,7 +28,12 @@
#define BCMSTB_HIF_SPI_INTR2 0xf03e1a00
#define BCMSTB_CS_REG 0xf03e0920
-#define CONFIG_ENV_IS_IN_SPI_FLASH 1
+/*
+ * Environment configuration for SPI flash.
+ */
+#define CONFIG_ENV_OFFSET 0x1e0000
+#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+
#define CONFIG_DM_SPI 1
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_CMD_SF
diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h
index e755383..cc28924 100644
--- a/include/configs/bcmstb.h
+++ b/include/configs/bcmstb.h
@@ -114,7 +114,6 @@ extern phys_addr_t prior_stage_fdt_address;
/*
* Serial console configuration.
*/
-
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \
115200}
@@ -151,10 +150,7 @@ extern phys_addr_t prior_stage_fdt_address;
* Environment configuration.
*/
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-
-#define CONFIG_ENV_OFFSET 0x1e0000
#define CONFIG_ENV_SIZE (64 << 10) /* 64 KiB */
-#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_ENV_OVERWRITE
--
1.8.3.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 2/2] board: arm: Add support for Broadcom BCM7260
2018-08-22 22:37 ` [U-Boot] [PATCH v2 0/2] " Thomas Fitzsimmons
2018-08-22 22:37 ` [U-Boot] [PATCH v2 1/2] arm: bcm7445: Change serial console index Thomas Fitzsimmons
@ 2018-08-22 22:37 ` Thomas Fitzsimmons
2018-09-11 12:26 ` [U-Boot] [U-Boot, v2, " Tom Rini
1 sibling, 1 reply; 8+ messages in thread
From: Thomas Fitzsimmons @ 2018-08-22 22:37 UTC (permalink / raw)
To: u-boot
Add support for loading U-Boot on the Broadcom 7260 SoC. This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.
Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
---
Changes for v2:
- Rebase to master tip
- Change serial console index
- Simplify and reorder defconfig
- Move some environment configuration to bcm7260.h
- Update MAINTAINERS files
MAINTAINERS | 2 +-
arch/arm/mach-bcmstb/Kconfig | 13 ++++++++++---
board/broadcom/bcmstb/MAINTAINERS | 8 ++++++++
configs/bcm7260_defconfig | 17 +++++++++++++++++
include/configs/bcm7260.h | 40 +++++++++++++++++++++++++++++++++++++++
5 files changed, 76 insertions(+), 4 deletions(-)
create mode 100644 configs/bcm7260_defconfig
create mode 100644 include/configs/bcm7260.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 8f23712..a1c31e2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -113,7 +113,7 @@ M: Thomas Fitzsimmons <fitzsim@fitzsim.org>
S: Maintained
F: arch/arm/mach-bcmstb/
F: board/broadcom/bcmstb/
-F: configs/bcm7445_defconfig
+F: configs/bcm7*_defconfig
F: doc/README.bcm7xxx
F: drivers/mmc/bcmstb_sdhci.c
F: drivers/spi/bcmstb_spi.c
diff --git a/arch/arm/mach-bcmstb/Kconfig b/arch/arm/mach-bcmstb/Kconfig
index 6c7952f..0a56c3c 100644
--- a/arch/arm/mach-bcmstb/Kconfig
+++ b/arch/arm/mach-bcmstb/Kconfig
@@ -7,8 +7,14 @@ config TARGET_BCM7445
Support for the Broadcom 7445 SoC. This port assumes BOLT
is acting as the second stage bootloader, and U-Boot is
acting as the third stage bootloader (TSBL), loaded by BOLT.
- This port may work on other BCM7xxx boards with
- configuration changes.
+
+config TARGET_BCM7260
+ bool "Broadcom 7260 TSBL"
+ depends on ARCH_BCMSTB
+ help
+ Support for the Broadcom 7260 SoC. This port assumes BOLT
+ is acting as the second stage bootloader, and U-Boot is
+ acting as the third stage bootloader (TSBL), loaded by BOLT.
config SYS_CPU
default "armv7"
@@ -23,7 +29,8 @@ config SYS_SOC
default "bcmstb"
config SYS_CONFIG_NAME
- default "bcm7445"
+ default "bcm7445" if TARGET_BCM7445
+ default "bcm7260" if TARGET_BCM7260
config SYS_FDT_SAVE_ADDRESS
hex "Address to which the prior stage provided DTB will be copied"
diff --git a/board/broadcom/bcmstb/MAINTAINERS b/board/broadcom/bcmstb/MAINTAINERS
index 5851cb9..eda29b9 100644
--- a/board/broadcom/bcmstb/MAINTAINERS
+++ b/board/broadcom/bcmstb/MAINTAINERS
@@ -5,3 +5,11 @@ F: board/broadcom/bcmstb/
F: include/configs/bcmstb.h
F: include/configs/bcm7445.h
F: configs/bcm7445_defconfig
+
+BCM7260 BOARD
+M: Thomas Fitzsimmons <fitzsim@fitzsim.org>
+S: Maintained
+F: board/broadcom/bcmstb/
+F: include/configs/bcmstb.h
+F: include/configs/bcm7260.h
+F: configs/bcm7260_defconfig
diff --git a/configs/bcm7260_defconfig b/configs/bcm7260_defconfig
new file mode 100644
index 0000000..e3b6ed4
--- /dev/null
+++ b/configs/bcm7260_defconfig
@@ -0,0 +1,17 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCMSTB=y
+CONFIG_SYS_TEXT_BASE=0x10100000
+CONFIG_TARGET_BCM7260=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_BOOTDELAY=1
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot>"
+CONFIG_OF_PRIOR_STAGE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_BCMSTB=y
+CONFIG_CONS_INDEX=1
+CONFIG_EFI_LOADER=n
+CONFIG_EFI_PARTITION=y
diff --git a/include/configs/bcm7260.h b/include/configs/bcm7260.h
new file mode 100644
index 0000000..a2d7f61
--- /dev/null
+++ b/include/configs/bcm7260.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018 Cisco Systems, Inc.
+ *
+ * Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
+ *
+ * Configuration settings for the Broadcom BCM7260 SoC family.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SYS_NS16550_COM1 0xf040c000
+
+#define CONFIG_SYS_TEXT_BASE 0x10100000
+#define CONFIG_SYS_INIT_RAM_ADDR 0x10200000
+
+#define CONFIG_SYS_MALLOC_LEN ((40 * 1024) << 10) /* 40 MiB */
+
+#include "bcmstb.h"
+
+#define BCMSTB_SDHCI_BASE 0xf0200300
+#define BCMSTB_TIMER_LOW 0xf0412008
+#define BCMSTB_TIMER_HIGH 0xf041200c
+#define BCMSTB_TIMER_FREQUENCY 0xf0412020
+#define BCMSTB_HIF_MSPI_BASE 0xf0203c00
+#define BCMSTB_BSPI_BASE 0xf0203a00
+#define BCMSTB_HIF_SPI_INTR2 0xf0201a00
+#define BCMSTB_CS_REG 0xf0200920
+
+/*
+ * Environment configuration for eMMC.
+ */
+#define CONFIG_ENV_OFFSET (0x000040a4 * 512)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 0
+
+#define CONFIG_CMD_GPT
+
+#endif /* __CONFIG_H */
--
1.8.3.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH] board: arm: Add support for Broadcom BCM7260
2018-08-18 16:21 ` Florian Fainelli
@ 2018-08-23 1:07 ` Thomas Fitzsimmons
0 siblings, 0 replies; 8+ messages in thread
From: Thomas Fitzsimmons @ 2018-08-23 1:07 UTC (permalink / raw)
To: u-boot
Hi Florian,
Florian Fainelli <f.fainelli@gmail.com> writes:
[...]
>> +#define CONFIG_SYS_NS16550_COM3 0xf040c000
>
> This is the physical address of UARTA, there are typically 3 UARTs on
> those SoCs, is there a reason to name this COM3 and not COM1? If this is
> an established u-boot convention, pardon my ignore here.
There wasn't a good reason not to make this COM1, so I changed it and
BCM7445 to use CONFIG_CONS_INDEX=1 in the latest patch set I posted.
Thanks for reviewing,
Thomas
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [U-Boot, v2, 1/2] arm: bcm7445: Change serial console index
2018-08-22 22:37 ` [U-Boot] [PATCH v2 1/2] arm: bcm7445: Change serial console index Thomas Fitzsimmons
@ 2018-09-11 12:26 ` Tom Rini
0 siblings, 0 replies; 8+ messages in thread
From: Tom Rini @ 2018-09-11 12:26 UTC (permalink / raw)
To: u-boot
On Wed, Aug 22, 2018 at 06:37:54PM -0400, Thomas Fitzsimmons wrote:
> Change the configured serial console index to reflect that it is the
> first physical UART, reorder some defconfig lines and move some
> environment configuration from bcmstb.h to bcm7445.h.
>
> Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180911/accf9405/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [U-Boot, v2, 2/2] board: arm: Add support for Broadcom BCM7260
2018-08-22 22:37 ` [U-Boot] [PATCH v2 2/2] board: arm: Add support for Broadcom BCM7260 Thomas Fitzsimmons
@ 2018-09-11 12:26 ` Tom Rini
0 siblings, 0 replies; 8+ messages in thread
From: Tom Rini @ 2018-09-11 12:26 UTC (permalink / raw)
To: u-boot
On Wed, Aug 22, 2018 at 06:37:55PM -0400, Thomas Fitzsimmons wrote:
> Add support for loading U-Boot on the Broadcom 7260 SoC. This port
> assumes Broadcom's BOLT bootloader is acting as the second stage
> bootloader, and U-Boot is acting as the third stage bootloader, loaded
> as an ELF program by BOLT.
>
> Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180911/fadc4417/attachment.sig>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-09-11 12:26 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-08-17 1:44 [U-Boot] [PATCH] board: arm: Add support for Broadcom BCM7260 Thomas Fitzsimmons
2018-08-18 16:21 ` Florian Fainelli
2018-08-23 1:07 ` Thomas Fitzsimmons
2018-08-22 22:37 ` [U-Boot] [PATCH v2 0/2] " Thomas Fitzsimmons
2018-08-22 22:37 ` [U-Boot] [PATCH v2 1/2] arm: bcm7445: Change serial console index Thomas Fitzsimmons
2018-09-11 12:26 ` [U-Boot] [U-Boot, v2, " Tom Rini
2018-08-22 22:37 ` [U-Boot] [PATCH v2 2/2] board: arm: Add support for Broadcom BCM7260 Thomas Fitzsimmons
2018-09-11 12:26 ` [U-Boot] [U-Boot, v2, " Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.