[PATCH v4 0/4] Fix debug macros and their usages

[PATCH v4 0/4] Fix debug macros and their usages

[Nishad Kamdar]

This patchset fixes the four debug macros N_MSG, ERR_MSG, INIT_MSG and
IRQ_MSG. Each patch fixes one particular macro and its usages.

For N_MSG, replaces printk with dev_<level> without __func__ or __LINE__
or current->comm and current->pid. Removes the do {} while(0) loop for
the single statement macro.

For ERR_MSG and IRQ_MSG, makes the same changes as those for N_MSG, but
further drops the macros and replaces their usages with dev_<level>.

Removes the INIT_MSG macro and its usages.

Changes in v4:
  - Create multiple patches, one for each type of macro being
    deleted/changed.

Changes in v3:
  - Replace usages of ERR_MSG and IRQ_MSG with dev_err() in code itself.
  - Remove all INIT_MSG usages.
  - Drop ERR_MSG, INIT_MSG and IRQ_MSG from dbg.h.

Changes in v2:
  - Replace printk with dev_<level>.
  - Remove __func__, __LINE__, current->comm, current->pid from arguments.
  - Remove the do {} while(0) loop from these macros.
  - Modify commit message to include other changes.
-
Nishad Kamdar (4):
  staging: mt7621-mmc: Fix debug macro N_MSG
  staging: mt7621-mmc: Fix debug macro ERR_MSG and its usages
  staging: mt7621-mmc: Remove macro INIT_MSG and its usages
  staging: mt7621-mmc: Fix debug macro IRQ_MSG and its usages

 drivers/staging/mt7621-mmc/dbg.h |  36 +------
 drivers/staging/mt7621-mmc/sd.c  | 180 ++++++++++++++++++++-----------
 2 files changed, 121 insertions(+), 95 deletions(-)

-- 
2.17.1

[PATCH v4 1/4] staging: mt7621-mmc: Fix debug macro N_MSG

[Nishad Kamdar]

This patch fixes the debug macro N_MSG. Replaces printk with
dev_<level> without __func__ or __LINE__ or current->comm and
current->pid. Removes the do {} while(0) loop for the single
statement macro. Issue found by checkpatch.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
---
 drivers/staging/mt7621-mmc/dbg.h | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/mt7621-mmc/dbg.h b/drivers/staging/mt7621-mmc/dbg.h
index 2f2c56b73987..c56fb896617a 100644
--- a/drivers/staging/mt7621-mmc/dbg.h
+++ b/drivers/staging/mt7621-mmc/dbg.h
@@ -104,13 +104,10 @@ do { \
 
 #define N_MSG(evt, fmt, args...)
 /*
-do {    \
-    if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
-        printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
-            host->id,  ##args , __FUNCTION__, __LINE__, current->comm, current->pid);	\
-    } \
-} while(0)
-*/
+ *if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
+ *    dev_err(mmc_dev(host->mmc), "%d -> " fmt "\n", host->id, ##args) \
+ *}
+ */
 
 #define ERR_MSG(fmt, args...) \
 do { \
-- 
2.17.1

Re: [PATCH v4 1/4] staging: mt7621-mmc: Fix debug macro N_MSG

[Dan Carpenter]

On Wed, Aug 22, 2018 at 02:04:55PM +0530, Nishad Kamdar wrote:
> This patch fixes the debug macro N_MSG. Replaces printk with
> dev_<level> without __func__ or __LINE__ or current->comm and
> current->pid. Removes the do {} while(0) loop for the single
> statement macro. Issue found by checkpatch.
> 
> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
> ---
>  drivers/staging/mt7621-mmc/dbg.h | 11 ++++-------
>  1 file changed, 4 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/staging/mt7621-mmc/dbg.h b/drivers/staging/mt7621-mmc/dbg.h
> index 2f2c56b73987..c56fb896617a 100644
> --- a/drivers/staging/mt7621-mmc/dbg.h
> +++ b/drivers/staging/mt7621-mmc/dbg.h
> @@ -104,13 +104,10 @@ do { \
>  
>  #define N_MSG(evt, fmt, args...)
>  /*
> -do {    \
> -    if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> -        printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
> -            host->id,  ##args , __FUNCTION__, __LINE__, current->comm, current->pid);	\
> -    } \
> -} while(0)
> -*/
> + *if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> + *    dev_err(mmc_dev(host->mmc), "%d -> " fmt "\n", host->id, ##args) \
> + *}
> + */

I don't understand what you're trying to do here.  You just commented
out the macro and turned it into a no-op.  That's not what the patch
description says.

To me the original code seems fine.

regards,
dan carpenter

Re: [PATCH v4 1/4] staging: mt7621-mmc: Fix debug macro N_MSG

[Nishad Kamdar]

On Wed, Aug 22, 2018 at 12:09:36PM +0300, Dan Carpenter wrote:
> On Wed, Aug 22, 2018 at 02:04:55PM +0530, Nishad Kamdar wrote:
> > This patch fixes the debug macro N_MSG. Replaces printk with
> > dev_<level> without __func__ or __LINE__ or current->comm and
> > current->pid. Removes the do {} while(0) loop for the single
> > statement macro. Issue found by checkpatch.
> > 
> > Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
> > ---
> >  drivers/staging/mt7621-mmc/dbg.h | 11 ++++-------
> >  1 file changed, 4 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/staging/mt7621-mmc/dbg.h b/drivers/staging/mt7621-mmc/dbg.h
> > index 2f2c56b73987..c56fb896617a 100644
> > --- a/drivers/staging/mt7621-mmc/dbg.h
> > +++ b/drivers/staging/mt7621-mmc/dbg.h
> > @@ -104,13 +104,10 @@ do { \
> >  
> >  #define N_MSG(evt, fmt, args...)
> >  /*
> > -do {    \
> > -    if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> > -        printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
> > -            host->id,  ##args , __FUNCTION__, __LINE__, current->comm, current->pid);	\
> > -    } \
> > -} while(0)
> > -*/
> > + *if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> > + *    dev_err(mmc_dev(host->mmc), "%d -> " fmt "\n", host->id, ##args) \
> > + *}
> > + */
> 
> I don't understand what you're trying to do here.  You just commented
> out the macro and turned it into a no-op.  That's not what the patch
> description says.
> 
> To me the original code seems fine.
> 
> regards,
> dan carpenter
>

Ok. But the macro definition was already commented.
I just changed printk to dev_err and gave it a better
block comment format.
Should I leave the older version as it is ?

Thanks for the review.

regards,
nishad

Re: [PATCH v4 1/4] staging: mt7621-mmc: Fix debug macro N_MSG

[Greg Kroah-Hartman]

On Wed, Aug 22, 2018 at 04:40:56PM +0530, Nishad Kamdar wrote:
> On Wed, Aug 22, 2018 at 12:09:36PM +0300, Dan Carpenter wrote:
> > On Wed, Aug 22, 2018 at 02:04:55PM +0530, Nishad Kamdar wrote:
> > > This patch fixes the debug macro N_MSG. Replaces printk with
> > > dev_<level> without __func__ or __LINE__ or current->comm and
> > > current->pid. Removes the do {} while(0) loop for the single
> > > statement macro. Issue found by checkpatch.
> > > 
> > > Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
> > > ---
> > >  drivers/staging/mt7621-mmc/dbg.h | 11 ++++-------
> > >  1 file changed, 4 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/drivers/staging/mt7621-mmc/dbg.h b/drivers/staging/mt7621-mmc/dbg.h
> > > index 2f2c56b73987..c56fb896617a 100644
> > > --- a/drivers/staging/mt7621-mmc/dbg.h
> > > +++ b/drivers/staging/mt7621-mmc/dbg.h
> > > @@ -104,13 +104,10 @@ do { \
> > >  
> > >  #define N_MSG(evt, fmt, args...)
> > >  /*
> > > -do {    \
> > > -    if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> > > -        printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
> > > -            host->id,  ##args , __FUNCTION__, __LINE__, current->comm, current->pid);	\
> > > -    } \
> > > -} while(0)
> > > -*/
> > > + *if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> > > + *    dev_err(mmc_dev(host->mmc), "%d -> " fmt "\n", host->id, ##args) \
> > > + *}
> > > + */
> > 
> > I don't understand what you're trying to do here.  You just commented
> > out the macro and turned it into a no-op.  That's not what the patch
> > description says.
> > 
> > To me the original code seems fine.
> > 
> > regards,
> > dan carpenter
> >
> 
> Ok. But the macro definition was already commented.
> I just changed printk to dev_err and gave it a better
> block comment format.
> Should I leave the older version as it is ?

No, delete the whole thing if it is not being used, don't "convert" code
that is commented out.

thanks,

greg k-h

Re: [PATCH v4 1/4] staging: mt7621-mmc: Fix debug macro N_MSG

[Nishad Kamdar]

On Wed, Aug 22, 2018 at 01:26:41PM +0200, Greg Kroah-Hartman wrote:
> On Wed, Aug 22, 2018 at 04:40:56PM +0530, Nishad Kamdar wrote:
> > On Wed, Aug 22, 2018 at 12:09:36PM +0300, Dan Carpenter wrote:
> > > On Wed, Aug 22, 2018 at 02:04:55PM +0530, Nishad Kamdar wrote:
> > > > This patch fixes the debug macro N_MSG. Replaces printk with
> > > > dev_<level> without __func__ or __LINE__ or current->comm and
> > > > current->pid. Removes the do {} while(0) loop for the single
> > > > statement macro. Issue found by checkpatch.
> > > > 
> > > > Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
> > > > ---
> > > >  drivers/staging/mt7621-mmc/dbg.h | 11 ++++-------
> > > >  1 file changed, 4 insertions(+), 7 deletions(-)
> > > > 
> > > > diff --git a/drivers/staging/mt7621-mmc/dbg.h b/drivers/staging/mt7621-mmc/dbg.h
> > > > index 2f2c56b73987..c56fb896617a 100644
> > > > --- a/drivers/staging/mt7621-mmc/dbg.h
> > > > +++ b/drivers/staging/mt7621-mmc/dbg.h
> > > > @@ -104,13 +104,10 @@ do { \
> > > >  
> > > >  #define N_MSG(evt, fmt, args...)
> > > >  /*
> > > > -do {    \
> > > > -    if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> > > > -        printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
> > > > -            host->id,  ##args , __FUNCTION__, __LINE__, current->comm, current->pid);	\
> > > > -    } \
> > > > -} while(0)
> > > > -*/
> > > > + *if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> > > > + *    dev_err(mmc_dev(host->mmc), "%d -> " fmt "\n", host->id, ##args) \
> > > > + *}
> > > > + */
> > > 
> > > I don't understand what you're trying to do here.  You just commented
> > > out the macro and turned it into a no-op.  That's not what the patch
> > > description says.
> > > 
> > > To me the original code seems fine.
> > > 
> > > regards,
> > > dan carpenter
> > >
> > 
> > Ok. But the macro definition was already commented.
> > I just changed printk to dev_err and gave it a better
> > block comment format.
> > Should I leave the older version as it is ?
> 
> No, delete the whole thing if it is not being used, don't "convert" code
> that is commented out.
> 
> thanks,
> 
> greg k-h

Ok, I'll do that.

Thanks for the review.

regards,
nishad

Re: [PATCH v4 1/4] staging: mt7621-mmc: Fix debug macro N_MSG

[Dan Carpenter]

On Wed, Aug 22, 2018 at 04:40:56PM +0530, Nishad Kamdar wrote:
> On Wed, Aug 22, 2018 at 12:09:36PM +0300, Dan Carpenter wrote:
> > On Wed, Aug 22, 2018 at 02:04:55PM +0530, Nishad Kamdar wrote:
> > > This patch fixes the debug macro N_MSG. Replaces printk with
> > > dev_<level> without __func__ or __LINE__ or current->comm and
> > > current->pid. Removes the do {} while(0) loop for the single
> > > statement macro. Issue found by checkpatch.
> > > 
> > > Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
> > > ---
> > >  drivers/staging/mt7621-mmc/dbg.h | 11 ++++-------
> > >  1 file changed, 4 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/drivers/staging/mt7621-mmc/dbg.h b/drivers/staging/mt7621-mmc/dbg.h
> > > index 2f2c56b73987..c56fb896617a 100644
> > > --- a/drivers/staging/mt7621-mmc/dbg.h
> > > +++ b/drivers/staging/mt7621-mmc/dbg.h
> > > @@ -104,13 +104,10 @@ do { \
> > >  
> > >  #define N_MSG(evt, fmt, args...)
> > >  /*
> > > -do {    \
> > > -    if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> > > -        printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
> > > -            host->id,  ##args , __FUNCTION__, __LINE__, current->comm, current->pid);	\
> > > -    } \
> > > -} while(0)
> > > -*/
> > > + *if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> > > + *    dev_err(mmc_dev(host->mmc), "%d -> " fmt "\n", host->id, ##args) \
> > > + *}
> > > + */
> > 
> > I don't understand what you're trying to do here.  You just commented
> > out the macro and turned it into a no-op.  That's not what the patch
> > description says.
> > 
> > To me the original code seems fine.
> > 
> > regards,
> > dan carpenter
> >
> 
> Ok. But the macro definition was already commented.
> I just changed printk to dev_err and gave it a better
> block comment format.
> Should I leave the older version as it is ?

Oh...  Yeah.  You're right.  Sorry about that.

We normally just delete dead code without even thinking hard about it.
It turns out that if we delete all the N_MSG() code, it's actually quite
a bit.  But probably it's the right thing to do, instead of hanging on
to it like a hoarder.

regards,
dan carpenter

Re: [PATCH v4 1/4] staging: mt7621-mmc: Fix debug macro N_MSG

[Nishad Kamdar]

On Wed, Aug 22, 2018 at 02:38:44PM +0300, Dan Carpenter wrote:
> On Wed, Aug 22, 2018 at 04:40:56PM +0530, Nishad Kamdar wrote:
> > On Wed, Aug 22, 2018 at 12:09:36PM +0300, Dan Carpenter wrote:
> > > On Wed, Aug 22, 2018 at 02:04:55PM +0530, Nishad Kamdar wrote:
> > > > This patch fixes the debug macro N_MSG. Replaces printk with
> > > > dev_<level> without __func__ or __LINE__ or current->comm and
> > > > current->pid. Removes the do {} while(0) loop for the single
> > > > statement macro. Issue found by checkpatch.
> > > > 
> > > > Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
> > > > ---
> > > >  drivers/staging/mt7621-mmc/dbg.h | 11 ++++-------
> > > >  1 file changed, 4 insertions(+), 7 deletions(-)
> > > > 
> > > > diff --git a/drivers/staging/mt7621-mmc/dbg.h b/drivers/staging/mt7621-mmc/dbg.h
> > > > index 2f2c56b73987..c56fb896617a 100644
> > > > --- a/drivers/staging/mt7621-mmc/dbg.h
> > > > +++ b/drivers/staging/mt7621-mmc/dbg.h
> > > > @@ -104,13 +104,10 @@ do { \
> > > >  
> > > >  #define N_MSG(evt, fmt, args...)
> > > >  /*
> > > > -do {    \
> > > > -    if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> > > > -        printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
> > > > -            host->id,  ##args , __FUNCTION__, __LINE__, current->comm, current->pid);	\
> > > > -    } \
> > > > -} while(0)
> > > > -*/
> > > > + *if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
> > > > + *    dev_err(mmc_dev(host->mmc), "%d -> " fmt "\n", host->id, ##args) \
> > > > + *}
> > > > + */
> > > 
> > > I don't understand what you're trying to do here.  You just commented
> > > out the macro and turned it into a no-op.  That's not what the patch
> > > description says.
> > > 
> > > To me the original code seems fine.
> > > 
> > > regards,
> > > dan carpenter
> > >
> > 
> > Ok. But the macro definition was already commented.
> > I just changed printk to dev_err and gave it a better
> > block comment format.
> > Should I leave the older version as it is ?
> 
> Oh...  Yeah.  You're right.  Sorry about that.
> 
> We normally just delete dead code without even thinking hard about it.
> It turns out that if we delete all the N_MSG() code, it's actually quite
> a bit.  But probably it's the right thing to do, instead of hanging on
> to it like a hoarder.
> 
> regards,
> dan carpenter
> 

Ok. I get it.

Thanks for the review.

regards,
nishad

[PATCH v4 2/4] staging: mt7621-mmc: Fix debug macro ERR_MSG and its usages

[Nishad Kamdar]

Replace all usages of ERR_MSG with with dev_<level> without __func__
or __LINE__ or current->comm and current->pid. Remove the do {}
while(0) loop for the single statement macro. Drop ERR_MSG from dbg.h.
Issue found by checkpatch.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
---
 drivers/staging/mt7621-mmc/dbg.h |   6 --
 drivers/staging/mt7621-mmc/sd.c  | 128 ++++++++++++++++++++++---------
 2 files changed, 90 insertions(+), 44 deletions(-)

diff --git a/drivers/staging/mt7621-mmc/dbg.h b/drivers/staging/mt7621-mmc/dbg.h
index c56fb896617a..71295df59ed0 100644
--- a/drivers/staging/mt7621-mmc/dbg.h
+++ b/drivers/staging/mt7621-mmc/dbg.h
@@ -109,12 +109,6 @@ do { \
  *}
  */
 
-#define ERR_MSG(fmt, args...) \
-do { \
-	printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
-	       host->id,  ##args, __FUNCTION__, __LINE__, current->comm, current->pid); \
-} while (0);
-
 #if 1
 //defined CONFIG_MTK_MMC_CD_POLL
 #define INIT_MSG(fmt, args...)
diff --git a/drivers/staging/mt7621-mmc/sd.c b/drivers/staging/mt7621-mmc/sd.c
index 04d23cc7cd4a..6b2c72fc61f2 100644
--- a/drivers/staging/mt7621-mmc/sd.c
+++ b/drivers/staging/mt7621-mmc/sd.c
@@ -466,7 +466,8 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
 	//u8  clksrc = hw->clk_src;
 
 	if (!hz) { // set mmc system clock to 0 ?
-		//ERR_MSG("set mclk to 0!!!");
+		//dev_err(mmc_dev(host->mmc), "%d -> set mclk to 0!!!\n",
+		//	  host->id);
 		msdc_reset_hw(host);
 		return;
 	}
@@ -521,7 +522,7 @@ static void msdc_abort_data(struct msdc_host *host)
 {
 	struct mmc_command *stop = host->mrq->stop;
 
-	ERR_MSG("Need to Abort.");
+	dev_err(mmc_dev(host->mmc), "%d -> Need to Abort.\n", host->id);
 
 	msdc_reset_hw(host);
 	msdc_clr_fifo(host);
@@ -530,7 +531,8 @@ static void msdc_abort_data(struct msdc_host *host)
 	// need to check FIFO count 0 ?
 
 	if (stop) {  /* try to stop, but may not success */
-		ERR_MSG("stop when abort CMD<%d>", stop->opcode);
+		dev_err(mmc_dev(host->mmc), "%d -> stop when abort CMD<%d>\n",
+			host->id, stop->opcode);
 		(void)msdc_do_command(host, stop, 0, CMD_TIMEOUT);
 	}
 
@@ -688,13 +690,17 @@ static void msdc_pm(pm_message_t state, void *data)
 
 	} else if (evt == PM_EVENT_RESUME || evt == PM_EVENT_USER_RESUME) {
 		if (!host->suspend) {
-			//ERR_MSG("warning: already resume");
+			//dev_err(mmc_dev(host->mmc),
+			//	  "%d -> warning: already resume\n",
+			//	  host->id);
 			return;
 		}
 
 		/* No PM resume when USR suspend */
 		if (evt == PM_EVENT_RESUME && host->pm_state.event == PM_EVENT_USER_SUSPEND) {
-			ERR_MSG("PM Resume when in USR Suspend");		/* won't happen. */
+			dev_err(mmc_dev(host->mmc),
+				"%d -> PM Resume when in USR Suspend\n",
+				host->id); /* won't happen. */
 			return;
 		}
 
@@ -812,7 +818,9 @@ static unsigned int msdc_command_start(struct msdc_host   *host,
 				break;
 
 			if (time_after(jiffies, tmo)) {
-				ERR_MSG("XXX cmd_busy timeout: before CMD<%d>", opcode);
+				dev_err(mmc_dev(host->mmc),
+					"%d -> XXX cmd_busy timeout: before CMD<%d>\n",
+					host->id, opcode);
 				cmd->error = -ETIMEDOUT;
 				msdc_reset_hw(host);
 				goto end;
@@ -823,7 +831,9 @@ static unsigned int msdc_command_start(struct msdc_host   *host,
 			if (!sdc_is_busy())
 				break;
 			if (time_after(jiffies, tmo)) {
-				ERR_MSG("XXX sdc_busy timeout: before CMD<%d>", opcode);
+				dev_err(mmc_dev(host->mmc),
+					"%d -> XXX sdc_busy timeout: before CMD<%d>\n",
+					host->id, opcode);
 				cmd->error = -ETIMEDOUT;
 				msdc_reset_hw(host);
 				goto end;
@@ -862,7 +872,9 @@ static unsigned int msdc_command_resp(struct msdc_host   *host,
 
 	spin_unlock(&host->lock);
 	if (!wait_for_completion_timeout(&host->cmd_done, 10 * timeout)) {
-		ERR_MSG("XXX CMD<%d> wait_for_completion timeout ARG<0x%.8x>", opcode, cmd->arg);
+		dev_err(mmc_dev(host->mmc),
+			"%d -> XXX CMD<%d> wait_for_completion timeout ARG<0x%.8x>\n",
+			host->id, opcode, cmd->arg);
 		cmd->error = -ETIMEDOUT;
 		msdc_reset_hw(host);
 	}
@@ -1125,15 +1137,22 @@ static int msdc_do_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 		spin_unlock(&host->lock);
 		if (!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)) {
-			ERR_MSG("XXX CMD<%d> wait xfer_done<%d> timeout!!", cmd->opcode, data->blocks * data->blksz);
-			ERR_MSG("    DMA_SA   = 0x%x",
-				readl(host->base + MSDC_DMA_SA));
-			ERR_MSG("    DMA_CA   = 0x%x",
-				readl(host->base + MSDC_DMA_CA));
-			ERR_MSG("    DMA_CTRL = 0x%x",
-				readl(host->base + MSDC_DMA_CTRL));
-			ERR_MSG("    DMA_CFG  = 0x%x",
-				readl(host->base + MSDC_DMA_CFG));
+			dev_err(mmc_dev(host->mmc),
+				"%d -> XXX CMD<%d> wait xfer_done<%d> timeout!!\n",
+				host->id, cmd->opcode,
+				data->blocks * data->blksz);
+			dev_err(mmc_dev(host->mmc),
+				"%d ->     DMA_SA   = 0x%x\n",
+				host->id, readl(host->base + MSDC_DMA_SA));
+			dev_err(mmc_dev(host->mmc),
+				"%d ->     DMA_CA   = 0x%x\n",
+				host->id, readl(host->base + MSDC_DMA_CA));
+			dev_err(mmc_dev(host->mmc),
+				"%d ->     DMA_CTRL = 0x%x\n",
+				host->id, readl(host->base + MSDC_DMA_CTRL));
+			dev_err(mmc_dev(host->mmc),
+				"%d ->     DMA_CFG  = 0x%x\n",
+				host->id, readl(host->base + MSDC_DMA_CFG));
 			data->error = -ETIMEDOUT;
 
 			msdc_reset_hw(host);
@@ -1200,7 +1219,10 @@ static int msdc_do_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	if (mrq->stop && mrq->stop->error)
 		host->error |= 0x100;
 
-	//if (host->error) ERR_MSG("host->error<%d>", host->error);
+	//if (host->error)
+	//	dev_err(mmc_dev(host->mmc),
+	//		"%d -> host->error<%d>\n",
+	//		host->id, host->error);
 
 	return host->error;
 }
@@ -1260,19 +1282,27 @@ static int msdc_tune_cmdrsp(struct msdc_host *host, struct mmc_command *cmd)
 			if (host->app_cmd) {
 				result = msdc_app_cmd(host->mmc, host);
 				if (result) {
-					ERR_MSG("TUNE_CMD app_cmd<%d> failed: RESP_RXDLY<%d>,R_SMPL<%d>",
-						host->mrq->cmd->opcode, cur_rrdly, cur_rsmpl);
+					dev_err(mmc_dev(host->mmc),
+						"%d -> TUNE_CMD app_cmd<%d> failed: RESP_RXDLY<%d>,R_SMPL<%d>\n",
+						host->id,
+						host->mrq->cmd->opcode,
+						cur_rrdly, cur_rsmpl);
 					continue;
 				}
 			}
 			result = msdc_do_command(host, cmd, 0, CMD_TIMEOUT); // not tune.
-			ERR_MSG("TUNE_CMD<%d> %s PAD_CMD_RESP_RXDLY[26:22]<%d> R_SMPL[1]<%d>", cmd->opcode,
-				(result == 0) ? "PASS" : "FAIL", cur_rrdly, cur_rsmpl);
+			dev_err(mmc_dev(host->mmc),
+				"%d -> TUNE_CMD<%d> %s PAD_CMD_RESP_RXDLY[26:22]<%d> R_SMPL[1]<%d>\n",
+				host->id, cmd->opcode,
+				(result == 0) ? "PASS" : "FAIL", cur_rrdly,
+				cur_rsmpl);
 
 			if (result == 0)
 				return 0;
 			if (result != -EIO) {
-				ERR_MSG("TUNE_CMD<%d> Error<%d> not -EIO", cmd->opcode, result);
+				dev_err(mmc_dev(host->mmc),
+					"%d -> TUNE_CMD<%d> Error<%d> not -EIO\n",
+					host->id, cmd->opcode, result);
 				return result;
 			}
 
@@ -1325,7 +1355,10 @@ static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
 			if (host->app_cmd) {
 				result = msdc_app_cmd(host->mmc, host);
 				if (result) {
-					ERR_MSG("TUNE_BREAD app_cmd<%d> failed", host->mrq->cmd->opcode);
+					dev_err(mmc_dev(host->mmc),
+						"%d -> TUNE_BREAD app_cmd<%d> failed\n",
+						host->id,
+						host->mrq->cmd->opcode);
 					continue;
 				}
 			}
@@ -1336,10 +1369,13 @@ static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
 				      &dcrc); /* RO */
 			if (!ddr)
 				dcrc &= ~SDC_DCRC_STS_NEG;
-			ERR_MSG("TUNE_BREAD<%s> dcrc<0x%x> DATRDDLY0/1<0x%x><0x%x> dsmpl<0x%x>",
-				(result == 0 && dcrc == 0) ? "PASS" : "FAIL", dcrc,
-				readl(host->base + MSDC_DAT_RDDLY0),
-				readl(host->base + MSDC_DAT_RDDLY1), cur_dsmpl);
+			dev_err(mmc_dev(host->mmc),
+				"%d -> TUNE_BREAD<%s> dcrc<0x%x> DATRDDLY0/1<0x%x><0x%x> dsmpl<0x%x>\n",
+				host->id,
+				(result == 0 && dcrc == 0) ? "PASS" : "FAIL",
+				dcrc, readl(host->base + MSDC_DAT_RDDLY0),
+				readl(host->base + MSDC_DAT_RDDLY1),
+				cur_dsmpl);
 
 			/* Fix me: result is 0, but dcrc is still exist */
 			if (result == 0 && dcrc == 0) {
@@ -1348,8 +1384,11 @@ static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
 				/* there is a case: command timeout, and data phase not processed */
 				if (mrq->data->error != 0 &&
 				    mrq->data->error != -EIO) {
-					ERR_MSG("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>",
-						result, mrq->cmd->error, mrq->data->error);
+					dev_err(mmc_dev(host->mmc),
+						"%d -> TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n",
+						host->id, result,
+						mrq->cmd->error,
+						mrq->data->error);
 					goto done;
 				}
 			}
@@ -1458,13 +1497,18 @@ static int msdc_tune_bwrite(struct mmc_host *mmc, struct mmc_request *mrq)
 				if (host->app_cmd) {
 					result = msdc_app_cmd(host->mmc, host);
 					if (result) {
-						ERR_MSG("TUNE_BWRITE app_cmd<%d> failed", host->mrq->cmd->opcode);
+						dev_err(mmc_dev(host->mmc),
+							"%d -> TUNE_BWRITE app_cmd<%d> failed\n",
+							host->id,
+							host->mrq->cmd->opcode);
 						continue;
 					}
 				}
 				result = msdc_do_request(mmc, mrq);
 
-				ERR_MSG("TUNE_BWRITE<%s> DSPL<%d> DATWRDLY<%d> MSDC_DAT_RDDLY0<0x%x>",
+				dev_err(mmc_dev(host->mmc),
+					"%d -> TUNE_BWRITE<%s> DSPL<%d> DATWRDLY<%d> MSDC_DAT_RDDLY0<0x%x>\n",
+					host->id,
 					result == 0 ? "PASS" : "FAIL",
 					cur_dsmpl, cur_wrrdly, cur_rxdly0);
 
@@ -1473,8 +1517,11 @@ static int msdc_tune_bwrite(struct mmc_host *mmc, struct mmc_request *mrq)
 				} else {
 					/* there is a case: command timeout, and data phase not processed */
 					if (mrq->data->error != -EIO) {
-						ERR_MSG("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>",
-							result, mrq->cmd->error, mrq->data->error);
+						dev_err(mmc_dev(host->mmc),
+							"%d -> TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n",
+							host->id, result,
+							mrq->cmd->error,
+							mrq->data->error);
 						goto done;
 					}
 				}
@@ -1508,7 +1555,8 @@ static int msdc_get_card_status(struct mmc_host *mmc, struct msdc_host *host, u3
 	if (mmc->card) {
 		cmd.arg = mmc->card->rca << 16;
 	} else {
-		ERR_MSG("cmd13 mmc card is null");
+		dev_err(mmc_dev(host->mmc), "%d -> cmd13 mmc card is null\n",
+			host->id);
 		cmd.arg = host->app_cmd_arg;
 	}
 	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
@@ -1535,7 +1583,8 @@ static int msdc_check_busy(struct mmc_host *mmc, struct msdc_host *host)
 		if (err)
 			return err;
 		/* need cmd12? */
-		ERR_MSG("cmd<13> resp<0x%x>", status);
+		dev_err(mmc_dev(host->mmc), "%d -> cmd<13> resp<0x%x>\n",
+			host->id, status);
 	} while (R1_CURRENT_STATE(status) == 7);
 
 	return err;
@@ -1559,7 +1608,9 @@ static int msdc_tune_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	} else {
 		ret = msdc_check_busy(mmc, host);
 		if (ret) {
-			ERR_MSG("XXX cmd13 wait program done failed");
+			dev_err(mmc_dev(host->mmc),
+				"%d -> XXX cmd13 wait program done failed\n",
+				host->id);
 			return ret;
 		}
 		/* CRC and TO */
@@ -2289,7 +2340,8 @@ static int msdc_drv_remove(struct platform_device *pdev)
 	host = mmc_priv(mmc);
 	BUG_ON(!host);
 
-	ERR_MSG("removed !!!");
+	dev_err(mmc_dev(host->mmc), "%d -> removed !!!\n",
+		host->id);
 
 	platform_set_drvdata(pdev, NULL);
 	mmc_remove_host(host->mmc);
-- 
2.17.1

Re: [PATCH v4 2/4] staging: mt7621-mmc: Fix debug macro ERR_MSG and its usages

[Dan Carpenter]

On Wed, Aug 22, 2018 at 02:13:07PM +0530, Nishad Kamdar wrote:
> diff --git a/drivers/staging/mt7621-mmc/sd.c b/drivers/staging/mt7621-mmc/sd.c
> index 04d23cc7cd4a..6b2c72fc61f2 100644
> --- a/drivers/staging/mt7621-mmc/sd.c
> +++ b/drivers/staging/mt7621-mmc/sd.c
> @@ -466,7 +466,8 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
>  	//u8  clksrc = hw->clk_src;
>  
>  	if (!hz) { // set mmc system clock to 0 ?
> -		//ERR_MSG("set mclk to 0!!!");
> +		//dev_err(mmc_dev(host->mmc), "%d -> set mclk to 0!!!\n",
> +		//	  host->id);

Just delete commented out code.

>  		msdc_reset_hw(host);
>  		return;
>  	}

regards,
dan carpenter

Re: [PATCH v4 2/4] staging: mt7621-mmc: Fix debug macro ERR_MSG and its usages

[Nishad Kamdar]

On Wed, Aug 22, 2018 at 12:13:42PM +0300, Dan Carpenter wrote:
> On Wed, Aug 22, 2018 at 02:13:07PM +0530, Nishad Kamdar wrote:
> > diff --git a/drivers/staging/mt7621-mmc/sd.c b/drivers/staging/mt7621-mmc/sd.c
> > index 04d23cc7cd4a..6b2c72fc61f2 100644
> > --- a/drivers/staging/mt7621-mmc/sd.c
> > +++ b/drivers/staging/mt7621-mmc/sd.c
> > @@ -466,7 +466,8 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
> >  	//u8  clksrc = hw->clk_src;
> >  
> >  	if (!hz) { // set mmc system clock to 0 ?
> > -		//ERR_MSG("set mclk to 0!!!");
> > +		//dev_err(mmc_dev(host->mmc), "%d -> set mclk to 0!!!\n",
> > +		//	  host->id);
> 
> Just delete commented out code.
> 
> >  		msdc_reset_hw(host);
> >  		return;
> >  	}
> 
> regards,
> dan carpenter
> 

Ok, I'll do that.

Thanks for the review.

regards,
nishad

Re: [PATCH v4 2/4] staging: mt7621-mmc: Fix debug macro ERR_MSG and its usages

[Nishad Kamdar]

On Wed, Aug 22, 2018 at 12:13:42PM +0300, Dan Carpenter wrote:
> On Wed, Aug 22, 2018 at 02:13:07PM +0530, Nishad Kamdar wrote:
> > diff --git a/drivers/staging/mt7621-mmc/sd.c b/drivers/staging/mt7621-mmc/sd.c
> > index 04d23cc7cd4a..6b2c72fc61f2 100644
> > --- a/drivers/staging/mt7621-mmc/sd.c
> > +++ b/drivers/staging/mt7621-mmc/sd.c
> > @@ -466,7 +466,8 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
> >  	//u8  clksrc = hw->clk_src;
> >  
> >  	if (!hz) { // set mmc system clock to 0 ?
> > -		//ERR_MSG("set mclk to 0!!!");
> > +		//dev_err(mmc_dev(host->mmc), "%d -> set mclk to 0!!!\n",
> > +		//	  host->id);
> 
> Just delete commented out code.
> 
> >  		msdc_reset_hw(host);
> >  		return;
> >  	}
> 
> regards,
> dan carpenter
> 

Ok, I'll do that.

Thanks for the review.

regards,
nishad

[PATCH v4 3/4] staging: mt7621-mmc: Remove macro INIT_MSG and its usages

[Nishad Kamdar]

Removed all usages of INIT_MSG and dropped it from dbg.h.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
---
 drivers/staging/mt7621-mmc/dbg.h |  7 -------
 drivers/staging/mt7621-mmc/sd.c  | 16 ----------------
 2 files changed, 23 deletions(-)

diff --git a/drivers/staging/mt7621-mmc/dbg.h b/drivers/staging/mt7621-mmc/dbg.h
index 71295df59ed0..8d2c16450ef5 100644
--- a/drivers/staging/mt7621-mmc/dbg.h
+++ b/drivers/staging/mt7621-mmc/dbg.h
@@ -111,15 +111,8 @@ do { \
 
 #if 1
 //defined CONFIG_MTK_MMC_CD_POLL
-#define INIT_MSG(fmt, args...)
 #define IRQ_MSG(fmt, args...)
 #else
-#define INIT_MSG(fmt, args...) \
-do { \
-	printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
-	       host->id,  ##args, __FUNCTION__, __LINE__, current->comm, current->pid); \
-} while (0);
-
 /* PID in ISR in not corrent */
 #define IRQ_MSG(fmt, args...) \
 do { \
diff --git a/drivers/staging/mt7621-mmc/sd.c b/drivers/staging/mt7621-mmc/sd.c
index 6b2c72fc61f2..327c1cd7fd04 100644
--- a/drivers/staging/mt7621-mmc/sd.c
+++ b/drivers/staging/mt7621-mmc/sd.c
@@ -187,12 +187,10 @@ static u32 hclks[] = {50000000}; /* +/- by chhung */
 //============================================
 #define msdc_vcore_on(host) \
 	do {								\
-		INIT_MSG("[+]VMC ref. count<%d>", ++host->pwr_ref);	\
 		(void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD");	\
 	} while (0)
 #define msdc_vcore_off(host) \
 	do {								\
-		INIT_MSG("[-]VMC ref. count<%d>", --host->pwr_ref);	\
 		(void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD");		\
 	} while (0)
 
@@ -439,7 +437,6 @@ static void msdc_select_clksrc(struct msdc_host *host, unsigned char clksrc)
 	u32 val;
 
 	BUG_ON(clksrc > 3);
-	INIT_MSG("set clock source to <%d>", clksrc);
 
 	val = readl(host->base + MSDC_CLKSRC_REG);
 	if (readl(host->base + MSDC_ECO_VER) >= 4) {
@@ -510,10 +507,6 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
 	host->mclk = hz;
 	msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); // need?
 
-	INIT_MSG("================");
-	INIT_MSG("!!! Set<%dKHz> Source<%dKHz> -> sclk<%dKHz>", hz / 1000, hclk / 1000, sclk / 1000);
-	INIT_MSG("================");
-
 	msdc_irq_restore(flags);
 }
 
@@ -671,12 +664,6 @@ static void msdc_pm(pm_message_t state, void *data)
 	struct msdc_host *host = (struct msdc_host *)data;
 	int evt = state.event;
 
-	if (evt == PM_EVENT_USER_RESUME || evt == PM_EVENT_USER_SUSPEND) {
-		INIT_MSG("USR_%s: suspend<%d> power<%d>",
-			evt == PM_EVENT_USER_RESUME ? "EVENT_USER_RESUME" : "EVENT_USER_SUSPEND",
-			host->suspend, host->power_mode);
-	}
-
 	if (evt == PM_EVENT_SUSPEND || evt == PM_EVENT_USER_SUSPEND) {
 		if (host->suspend) /* already suspend */  /* default 0*/
 			return;
@@ -1762,7 +1749,6 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (host->mclk != ios->clock) {
 		if (ios->clock > 25000000) {
 			//if (!(host->hw->flags & MSDC_REMOVABLE)) {
-			INIT_MSG("SD data latch edge<%d>", MSDC_SMPL_FALLING);
 			sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_RSPL,
 				      MSDC_SMPL_FALLING);
 			sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DSPL,
@@ -1815,7 +1801,6 @@ static int msdc_ops_get_cd(struct mmc_host *mmc)
 		return 1;
 #else
 		host->card_inserted = (host->pm_state.event == PM_EVENT_USER_RESUME) ? 1 : 0;
-		INIT_MSG("sdio ops_get_cd<%d>", host->card_inserted);
 		return host->card_inserted;
 #endif
 	}
@@ -1839,7 +1824,6 @@ static int msdc_ops_get_cd(struct mmc_host *mmc)
 		present = 0; /* TODO? Check DAT3 pins for card detection */
 	}
 
-	INIT_MSG("ops_get_cd return<%d>", present);
 	return present;
 }
 
-- 
2.17.1

[PATCH v4 4/4] staging: mt7621-mmc: Fix debug macro IRQ_MSG and its usages

[Nishad Kamdar]

Replace all usages of IRQ_MSG with with dev_<level> without __func__
or __LINE__ or current->comm and current->pid. Remove the do {}
while(0) loop for the single statement macro. Drop IRQ_MSG from dbg.h.
Issue found by checkpatch.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
---
 drivers/staging/mt7621-mmc/dbg.h | 12 -----------
 drivers/staging/mt7621-mmc/sd.c  | 36 ++++++++++++++++++++++++--------
 2 files changed, 27 insertions(+), 21 deletions(-)

diff --git a/drivers/staging/mt7621-mmc/dbg.h b/drivers/staging/mt7621-mmc/dbg.h
index 8d2c16450ef5..5458dae5dc03 100644
--- a/drivers/staging/mt7621-mmc/dbg.h
+++ b/drivers/staging/mt7621-mmc/dbg.h
@@ -109,18 +109,6 @@ do { \
  *}
  */
 
-#if 1
-//defined CONFIG_MTK_MMC_CD_POLL
-#define IRQ_MSG(fmt, args...)
-#else
-/* PID in ISR in not corrent */
-#define IRQ_MSG(fmt, args...) \
-do { \
-	printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d>\n",	\
-	       host->id,  ##args, __FUNCTION__, __LINE__);	\
-} while (0);
-#endif
-
 void msdc_debug_proc_init(void);
 
 #if 0 /* --- chhung */
diff --git a/drivers/staging/mt7621-mmc/sd.c b/drivers/staging/mt7621-mmc/sd.c
index 327c1cd7fd04..5cb6bc36e78b 100644
--- a/drivers/staging/mt7621-mmc/sd.c
+++ b/drivers/staging/mt7621-mmc/sd.c
@@ -420,7 +420,9 @@ static void msdc_tasklet_card(struct work_struct *work)
 		mmc_detect_change(host->mmc, msecs_to_jiffies(20));
 	}
 
-	IRQ_MSG("card found<%s>", inserted ? "inserted" : "removed");
+	dev_err(mmc_dev(host->mmc),
+		"%d -> card found<%s>\n",
+		host->id, inserted ? "inserted" : "removed");
 #endif
 
 	spin_unlock(&host->lock);
@@ -1858,14 +1860,17 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
 	if (intsts & MSDC_INT_CDSC) {
 		if (host->mmc->caps & MMC_CAP_NEEDS_POLL)
 			return IRQ_HANDLED;
-		IRQ_MSG("MSDC_INT_CDSC irq<0x%.8x>", intsts);
+		dev_err(mmc_dev(host->mmc),
+			"%d -> MSDC_INT_CDSC irq<0x%.8x>\n", host->id, intsts);
 		schedule_delayed_work(&host->card_delaywork, HZ);
 		/* tuning when plug card ? */
 	}
 
 	/* sdio interrupt */
 	if (intsts & MSDC_INT_SDIOIRQ) {
-		IRQ_MSG("XXX MSDC_INT_SDIOIRQ");  /* seems not sdio irq */
+		dev_err(mmc_dev(host->mmc),
+			"%d -> XXX MSDC_INT_SDIOIRQ\n",
+			host->id); /* seems not sdio irq */
 		//mmc_signal_sdio_irq(host->mmc);
 	}
 
@@ -1883,10 +1888,15 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
 			msdc_clr_int();
 
 			if (intsts & MSDC_INT_DATTMO) {
-				IRQ_MSG("XXX CMD<%d> MSDC_INT_DATTMO", host->mrq->cmd->opcode);
+				dev_err(mmc_dev(host->mmc),
+					"%d -> XXX CMD<%d> MSDC_INT_DATTMO\n",
+					host->id, host->mrq->cmd->opcode);
 				data->error = -ETIMEDOUT;
 			} else if (intsts & MSDC_INT_DATCRCERR) {
-				IRQ_MSG("XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>", host->mrq->cmd->opcode, readl(host->base + SDC_DCRC_STS));
+				dev_err(mmc_dev(host->mmc),
+					"%d -> XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>\n",
+					host->id, host->mrq->cmd->opcode,
+					readl(host->base + SDC_DCRC_STS);
 				data->error = -EIO;
 			}
 
@@ -1919,15 +1929,23 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
 			}
 		} else if ((intsts & MSDC_INT_RSPCRCERR) || (intsts & MSDC_INT_ACMDCRCERR)) {
 			if (intsts & MSDC_INT_ACMDCRCERR)
-				IRQ_MSG("XXX CMD<%d> MSDC_INT_ACMDCRCERR", cmd->opcode);
+				dev_err(mmc_dev(host->mmc),
+					"%d -> XXX CMD<%d> MSDC_INT_ACMDCRCERR\n",
+					host->id, cmd->opcode);
 			else
-				IRQ_MSG("XXX CMD<%d> MSDC_INT_RSPCRCERR", cmd->opcode);
+				dev_err(mmc_dev(host->mmc),
+					"%d -> XXX CMD<%d> MSDC_INT_RSPCRCERR\n",
+					host->id, cmd->opcode);
 			cmd->error = -EIO;
 		} else if ((intsts & MSDC_INT_CMDTMO) || (intsts & MSDC_INT_ACMDTMO)) {
 			if (intsts & MSDC_INT_ACMDTMO)
-				IRQ_MSG("XXX CMD<%d> MSDC_INT_ACMDTMO", cmd->opcode);
+				dev_err(mmc_dev(host->mmc),
+					"%d -> XXX CMD<%d> MSDC_INT_ACMDTMO\n",
+					host->id, cmd->opcode);
 			else
-				IRQ_MSG("XXX CMD<%d> MSDC_INT_CMDTMO", cmd->opcode);
+				dev_err(mmc_dev(host->mmc),
+					"%d -> XXX CMD<%d> MSDC_INT_CMDTMO\n",
+					host->id, cmd->opcode);
 			cmd->error = -ETIMEDOUT;
 			msdc_reset_hw(host);
 			msdc_clr_fifo(host);
-- 
2.17.1