* [PATCH 01/30] media: entity: Use pad as a starting point for graph walk
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 02/30] media: entity: Use pads instead of entities in the media graph walk stack Niklas Söderlund
` (29 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
With the upcoming use of the recently added has_route() media entity op, all
the pads in an entity will no longer be considered interconnected. This has
an effect where the media graph is traversed: the starting pad does make a
difference.
Prepare for this change by using pad instead of the entity as an argument
for the graph walk operations. The actual graph traversal algorithm change
is in further patches.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
Documentation/media/kapi/mc-core.rst | 2 +-
drivers/media/media-entity.c | 17 ++++++++---------
drivers/media/platform/exynos4-is/media-dev.c | 4 ++--
drivers/media/platform/omap3isp/ispvideo.c | 2 +-
drivers/media/platform/vsp1/vsp1_video.c | 2 +-
drivers/media/platform/xilinx/xilinx-dma.c | 2 +-
drivers/media/v4l2-core/v4l2-mc.c | 6 +++---
drivers/staging/media/davinci_vpfe/vpfe_video.c | 6 +++---
drivers/staging/media/omap4iss/iss_video.c | 4 ++--
include/media/media-entity.h | 10 ++++------
10 files changed, 26 insertions(+), 29 deletions(-)
diff --git a/Documentation/media/kapi/mc-core.rst b/Documentation/media/kapi/mc-core.rst
index 0c05503eaf1fa6c7..27aefb9a778b2ad6 100644
--- a/Documentation/media/kapi/mc-core.rst
+++ b/Documentation/media/kapi/mc-core.rst
@@ -165,7 +165,7 @@ Drivers initiate a graph traversal by calling
:c:func:`media_graph_walk_start()`
The graph structure, provided by the caller, is initialized to start graph
-traversal at the given entity.
+traversal at the given pad in an entity.
Drivers can then retrieve the next entity by calling
:c:func:`media_graph_walk_next()`
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 3498551e618e5437..70679d186944a117 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -300,17 +300,16 @@ void media_graph_walk_cleanup(struct media_graph *graph)
}
EXPORT_SYMBOL_GPL(media_graph_walk_cleanup);
-void media_graph_walk_start(struct media_graph *graph,
- struct media_entity *entity)
+void media_graph_walk_start(struct media_graph *graph, struct media_pad *pad)
{
media_entity_enum_zero(&graph->ent_enum);
- media_entity_enum_set(&graph->ent_enum, entity);
+ media_entity_enum_set(&graph->ent_enum, pad->entity);
graph->top = 0;
graph->stack[graph->top].entity = NULL;
- stack_push(graph, entity);
- dev_dbg(entity->graph_obj.mdev->dev,
- "begin graph walk at '%s'\n", entity->name);
+ stack_push(graph, pad->entity);
+ dev_dbg(pad->graph_obj.mdev->dev,
+ "begin graph walk at '%s':%u\n", pad->entity->name, pad->index);
}
EXPORT_SYMBOL_GPL(media_graph_walk_start);
@@ -428,7 +427,7 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
goto error_graph_walk_start;
}
- media_graph_walk_start(&pipe->graph, entity);
+ media_graph_walk_start(&pipe->graph, entity->pads);
while ((entity = media_graph_walk_next(graph))) {
DECLARE_BITMAP(active, MEDIA_ENTITY_MAX_PADS);
@@ -509,7 +508,7 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
* Link validation on graph failed. We revert what we did and
* return the error.
*/
- media_graph_walk_start(graph, entity_err);
+ media_graph_walk_start(graph, entity_err->pads);
while ((entity_err = media_graph_walk_next(graph))) {
/* Sanity check for negative stream_count */
@@ -560,7 +559,7 @@ void __media_pipeline_stop(struct media_entity *entity)
if (WARN_ON(!pipe))
return;
- media_graph_walk_start(graph, entity);
+ media_graph_walk_start(graph, entity->pads);
while ((entity = media_graph_walk_next(graph))) {
/* Sanity check for negative stream_count */
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index deb499f76412a33f..4e7aa9a37f22b904 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -1133,7 +1133,7 @@ static int __fimc_md_modify_pipelines(struct media_entity *entity, bool enable,
* through active links. This is needed as we cannot power on/off the
* subdevs in random order.
*/
- media_graph_walk_start(graph, entity);
+ media_graph_walk_start(graph, entity->pads);
while ((entity = media_graph_walk_next(graph))) {
if (!is_media_entity_v4l2_video_device(entity))
@@ -1148,7 +1148,7 @@ static int __fimc_md_modify_pipelines(struct media_entity *entity, bool enable,
return 0;
err:
- media_graph_walk_start(graph, entity_err);
+ media_graph_walk_start(graph, entity_err->pads);
while ((entity_err = media_graph_walk_next(graph))) {
if (!is_media_entity_v4l2_video_device(entity_err))
diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c
index 9d228eac24ea538c..218220b0a3ebb781 100644
--- a/drivers/media/platform/omap3isp/ispvideo.c
+++ b/drivers/media/platform/omap3isp/ispvideo.c
@@ -238,7 +238,7 @@ static int isp_video_get_graph_data(struct isp_video *video,
return ret;
}
- media_graph_walk_start(&graph, entity);
+ media_graph_walk_start(&graph, entity->pads);
while ((entity = media_graph_walk_next(&graph))) {
struct isp_video *__video;
diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c
index 81d47a09d7bcc6b8..da75847a61f3be63 100644
--- a/drivers/media/platform/vsp1/vsp1_video.c
+++ b/drivers/media/platform/vsp1/vsp1_video.c
@@ -583,7 +583,7 @@ static int vsp1_video_pipeline_build(struct vsp1_pipeline *pipe,
if (ret)
return ret;
- media_graph_walk_start(&graph, entity);
+ media_graph_walk_start(&graph, entity->pads);
while ((entity = media_graph_walk_next(&graph))) {
struct v4l2_subdev *subdev;
diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c
index d041f94be832ae62..ba767fa707e39dc4 100644
--- a/drivers/media/platform/xilinx/xilinx-dma.c
+++ b/drivers/media/platform/xilinx/xilinx-dma.c
@@ -193,7 +193,7 @@ static int xvip_pipeline_validate(struct xvip_pipeline *pipe,
return ret;
}
- media_graph_walk_start(&graph, entity);
+ media_graph_walk_start(&graph, entity->pads);
while ((entity = media_graph_walk_next(&graph))) {
struct xvip_dma *dma;
diff --git a/drivers/media/v4l2-core/v4l2-mc.c b/drivers/media/v4l2-core/v4l2-mc.c
index 0fc185a2ce90e80a..c8adddb878cbd3b5 100644
--- a/drivers/media/v4l2-core/v4l2-mc.c
+++ b/drivers/media/v4l2-core/v4l2-mc.c
@@ -260,7 +260,7 @@ static int pipeline_pm_use_count(struct media_entity *entity,
{
int use = 0;
- media_graph_walk_start(graph, entity);
+ media_graph_walk_start(graph, entity->pads);
while ((entity = media_graph_walk_next(graph))) {
if (is_media_entity_v4l2_video_device(entity))
@@ -323,7 +323,7 @@ static int pipeline_pm_power(struct media_entity *entity, int change,
if (!change)
return 0;
- media_graph_walk_start(graph, entity);
+ media_graph_walk_start(graph, entity->pads);
while (!ret && (entity = media_graph_walk_next(graph)))
if (is_media_entity_v4l2_subdev(entity))
@@ -332,7 +332,7 @@ static int pipeline_pm_power(struct media_entity *entity, int change,
if (!ret)
return ret;
- media_graph_walk_start(graph, first);
+ media_graph_walk_start(graph, first->pads);
while ((first = media_graph_walk_next(graph))
&& first != entity)
diff --git a/drivers/staging/media/davinci_vpfe/vpfe_video.c b/drivers/staging/media/davinci_vpfe/vpfe_video.c
index 1269a983455e57c5..af0d9e81b8de1cad 100644
--- a/drivers/staging/media/davinci_vpfe/vpfe_video.c
+++ b/drivers/staging/media/davinci_vpfe/vpfe_video.c
@@ -150,7 +150,7 @@ static int vpfe_prepare_pipeline(struct vpfe_video_device *video)
mutex_unlock(&mdev->graph_mutex);
return -ENOMEM;
}
- media_graph_walk_start(&graph, entity);
+ media_graph_walk_start(&graph, entity->pads);
while ((entity = media_graph_walk_next(&graph))) {
if (entity == &video->video_dev.entity)
continue;
@@ -303,7 +303,7 @@ static int vpfe_pipeline_enable(struct vpfe_pipeline *pipe)
ret = media_graph_walk_init(&pipe->graph, mdev);
if (ret)
goto out;
- media_graph_walk_start(&pipe->graph, entity);
+ media_graph_walk_start(&pipe->graph, entity->pads);
while ((entity = media_graph_walk_next(&pipe->graph))) {
if (!is_media_entity_v4l2_subdev(entity))
@@ -345,7 +345,7 @@ static int vpfe_pipeline_disable(struct vpfe_pipeline *pipe)
mdev = entity->graph_obj.mdev;
mutex_lock(&mdev->graph_mutex);
- media_graph_walk_start(&pipe->graph, entity);
+ media_graph_walk_start(&pipe->graph, entity->pads);
while ((entity = media_graph_walk_next(&pipe->graph))) {
diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c
index a3a83424a926c793..b646fe909bad64d4 100644
--- a/drivers/staging/media/omap4iss/iss_video.c
+++ b/drivers/staging/media/omap4iss/iss_video.c
@@ -220,7 +220,7 @@ iss_video_far_end(struct iss_video *video)
return NULL;
}
- media_graph_walk_start(&graph, entity);
+ media_graph_walk_start(&graph, entity->pads);
while ((entity = media_graph_walk_next(&graph))) {
if (entity == &video->video.entity)
@@ -900,7 +900,7 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
if (ret < 0)
goto err_media_pipeline_start;
- media_graph_walk_start(&graph, entity);
+ media_graph_walk_start(&graph, entity->pads);
while ((entity = media_graph_walk_next(&graph)))
media_entity_enum_set(&pipe->ent_enum, entity);
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 3aa3d58d1d586dc2..20ff038c8aeff4b8 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -880,22 +880,20 @@ void media_graph_walk_cleanup(struct media_graph *graph);
void media_entity_put(struct media_entity *entity);
/**
- * media_graph_walk_start - Start walking the media graph at a
- * given entity
+ * media_graph_walk_start - Start walking the media graph at a given pad
*
* @graph: Media graph structure that will be used to walk the graph
- * @entity: Starting entity
+ * @pad: Starting pad
*
* Before using this function, media_graph_walk_init() must be
* used to allocate resources used for walking the graph. This
* function initializes the graph traversal structure to walk the
- * entities graph starting at the given entity. The traversal
+ * entities graph starting at the given pad. The traversal
* structure must not be modified by the caller during graph
* traversal. After the graph walk, the resources must be released
* using media_graph_walk_cleanup().
*/
-void media_graph_walk_start(struct media_graph *graph,
- struct media_entity *entity);
+void media_graph_walk_start(struct media_graph *graph, struct media_pad *pad);
/**
* media_graph_walk_next - Get the next entity in the graph
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 02/30] media: entity: Use pads instead of entities in the media graph walk stack
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
2018-08-23 13:25 ` [PATCH 01/30] media: entity: Use pad as a starting point for graph walk Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 03/30] media: entity: Walk the graph based on pads Niklas Söderlund
` (28 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
Change the media graph walk stack structure to use media pads instead of
using media entities. In addition to the entity, the pad contains the
information which pad in the entity are being dealt with.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/media-entity.c | 53 ++++++++++++++++++------------------
include/media/media-entity.h | 6 ++--
2 files changed, 29 insertions(+), 30 deletions(-)
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 70679d186944a117..c5dcae6d0caf92ec 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -237,40 +237,39 @@ EXPORT_SYMBOL_GPL(media_entity_pads_init);
* Graph traversal
*/
-static struct media_entity *
-media_entity_other(struct media_entity *entity, struct media_link *link)
+static struct media_pad *
+media_entity_other(struct media_pad *pad, struct media_link *link)
{
- if (link->source->entity == entity)
- return link->sink->entity;
+ if (link->source == pad)
+ return link->sink;
else
- return link->source->entity;
+ return link->source;
}
/* push an entity to traversal stack */
-static void stack_push(struct media_graph *graph,
- struct media_entity *entity)
+static void stack_push(struct media_graph *graph, struct media_pad *pad)
{
if (graph->top == MEDIA_ENTITY_ENUM_MAX_DEPTH - 1) {
WARN_ON(1);
return;
}
graph->top++;
- graph->stack[graph->top].link = entity->links.next;
- graph->stack[graph->top].entity = entity;
+ graph->stack[graph->top].link = pad->entity->links.next;
+ graph->stack[graph->top].pad = pad;
}
-static struct media_entity *stack_pop(struct media_graph *graph)
+static struct media_pad *stack_pop(struct media_graph *graph)
{
- struct media_entity *entity;
+ struct media_pad *pad;
- entity = graph->stack[graph->top].entity;
+ pad = graph->stack[graph->top].pad;
graph->top--;
- return entity;
+ return pad;
}
#define link_top(en) ((en)->stack[(en)->top].link)
-#define stack_top(en) ((en)->stack[(en)->top].entity)
+#define stack_top(en) ((en)->stack[(en)->top].pad)
/**
* media_graph_walk_init - Allocate resources for graph walk
@@ -306,8 +305,8 @@ void media_graph_walk_start(struct media_graph *graph, struct media_pad *pad)
media_entity_enum_set(&graph->ent_enum, pad->entity);
graph->top = 0;
- graph->stack[graph->top].entity = NULL;
- stack_push(graph, pad->entity);
+ graph->stack[graph->top].pad = NULL;
+ stack_push(graph, pad);
dev_dbg(pad->graph_obj.mdev->dev,
"begin graph walk at '%s':%u\n", pad->entity->name, pad->index);
}
@@ -315,16 +314,16 @@ EXPORT_SYMBOL_GPL(media_graph_walk_start);
static void media_graph_walk_iter(struct media_graph *graph)
{
- struct media_entity *entity = stack_top(graph);
+ struct media_pad *pad = stack_top(graph);
struct media_link *link;
- struct media_entity *next;
+ struct media_pad *next;
link = list_entry(link_top(graph), typeof(*link), list);
/* The link is not enabled so we do not follow. */
if (!(link->flags & MEDIA_LNK_FL_ENABLED)) {
link_top(graph) = link_top(graph)->next;
- dev_dbg(entity->graph_obj.mdev->dev,
+ dev_dbg(pad->graph_obj.mdev->dev,
"walk: skipping disabled link '%s':%u -> '%s':%u\n",
link->source->entity->name, link->source->index,
link->sink->entity->name, link->sink->index);
@@ -332,22 +331,22 @@ static void media_graph_walk_iter(struct media_graph *graph)
}
/* Get the entity in the other end of the link . */
- next = media_entity_other(entity, link);
+ next = media_entity_other(pad, link);
/* Has the entity already been visited? */
- if (media_entity_enum_test_and_set(&graph->ent_enum, next)) {
+ if (media_entity_enum_test_and_set(&graph->ent_enum, next->entity)) {
link_top(graph) = link_top(graph)->next;
- dev_dbg(entity->graph_obj.mdev->dev,
+ dev_dbg(pad->graph_obj.mdev->dev,
"walk: skipping entity '%s' (already seen)\n",
- next->name);
+ next->entity->name);
return;
}
/* Push the new entity to stack and start over. */
link_top(graph) = link_top(graph)->next;
stack_push(graph, next);
- dev_dbg(entity->graph_obj.mdev->dev, "walk: pushing '%s' on stack\n",
- next->name);
+ dev_dbg(next->graph_obj.mdev->dev, "walk: pushing '%s':%u on stack\n",
+ next->entity->name, next->index);
}
struct media_entity *media_graph_walk_next(struct media_graph *graph)
@@ -362,10 +361,10 @@ struct media_entity *media_graph_walk_next(struct media_graph *graph)
* top of the stack until no more entities on the level can be
* found.
*/
- while (link_top(graph) != &stack_top(graph)->links)
+ while (link_top(graph) != &stack_top(graph)->entity->links)
media_graph_walk_iter(graph);
- entity = stack_pop(graph);
+ entity = stack_pop(graph)->entity;
dev_dbg(entity->graph_obj.mdev->dev,
"walk: returning entity '%s'\n", entity->name);
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 20ff038c8aeff4b8..c844a677a1cfbb0d 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -86,16 +86,16 @@ struct media_entity_enum {
* struct media_graph - Media graph traversal state
*
* @stack: Graph traversal stack; the stack contains information
- * on the path the media entities to be walked and the
+ * on the path the media pads to be walked and the
* links through which they were reached.
- * @stack.entity: pointer to &struct media_entity at the graph.
+ * @stack.pad: pointer to &struct media_pad at the graph.
* @stack.link: pointer to &struct list_head.
* @ent_enum: Visited entities
* @top: The top of the stack
*/
struct media_graph {
struct {
- struct media_entity *entity;
+ struct media_pad *pad;
struct list_head *link;
} stack[MEDIA_ENTITY_ENUM_MAX_DEPTH];
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 03/30] media: entity: Walk the graph based on pads
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
2018-08-23 13:25 ` [PATCH 01/30] media: entity: Use pad as a starting point for graph walk Niklas Söderlund
2018-08-23 13:25 ` [PATCH 02/30] media: entity: Use pads instead of entities in the media graph walk stack Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 04/30] v4l: mc: Start walk from a specific pad in use count calculation Niklas Söderlund
` (27 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
Instead of iterating over graph entities during the walk, iterate the pads
through which the entity was first reached. This is required in order to
make the entity pipeline pad-based rather than entity based.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
Documentation/media/kapi/mc-core.rst | 7 ++-
drivers/media/media-entity.c | 46 ++++++++++--------
drivers/media/platform/exynos4-is/media-dev.c | 20 ++++----
drivers/media/platform/omap3isp/ispvideo.c | 17 +++----
drivers/media/platform/vsp1/vsp1_video.c | 12 ++---
drivers/media/platform/xilinx/xilinx-dma.c | 12 ++---
drivers/media/v4l2-core/v4l2-mc.c | 25 +++++-----
.../staging/media/davinci_vpfe/vpfe_video.c | 47 ++++++++++---------
drivers/staging/media/omap4iss/iss_video.c | 34 +++++++-------
include/media/media-entity.h | 7 +--
10 files changed, 122 insertions(+), 105 deletions(-)
diff --git a/Documentation/media/kapi/mc-core.rst b/Documentation/media/kapi/mc-core.rst
index 27aefb9a778b2ad6..849b87439b7a9772 100644
--- a/Documentation/media/kapi/mc-core.rst
+++ b/Documentation/media/kapi/mc-core.rst
@@ -167,8 +167,11 @@ Drivers initiate a graph traversal by calling
The graph structure, provided by the caller, is initialized to start graph
traversal at the given pad in an entity.
-Drivers can then retrieve the next entity by calling
-:c:func:`media_graph_walk_next()`
+Drivers can then retrieve the next pad by calling
+:c:func:`media_graph_walk_next()`. Only the pad through which the entity
+is first reached is returned. If the caller is interested in knowing which
+further pads would be connected, the :c:func:`media_entity_has_route()`
+function can be used for that.
When the graph traversal is complete the function will return ``NULL``.
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index c5dcae6d0caf92ec..ec7c61dff6ae879d 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -349,9 +349,9 @@ static void media_graph_walk_iter(struct media_graph *graph)
next->entity->name, next->index);
}
-struct media_entity *media_graph_walk_next(struct media_graph *graph)
+struct media_pad *media_graph_walk_next(struct media_graph *graph)
{
- struct media_entity *entity;
+ struct media_pad *pad;
if (stack_top(graph) == NULL)
return NULL;
@@ -364,11 +364,11 @@ struct media_entity *media_graph_walk_next(struct media_graph *graph)
while (link_top(graph) != &stack_top(graph)->entity->links)
media_graph_walk_iter(graph);
- entity = stack_pop(graph)->entity;
- dev_dbg(entity->graph_obj.mdev->dev,
- "walk: returning entity '%s'\n", entity->name);
+ pad = stack_pop(graph);
+ dev_dbg(pad->graph_obj.mdev->dev,
+ "walk: returning pad '%s':%u\n", pad->entity->name, pad->index);
- return entity;
+ return pad;
}
EXPORT_SYMBOL_GPL(media_graph_walk_next);
@@ -416,7 +416,8 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
{
struct media_device *mdev = entity->graph_obj.mdev;
struct media_graph *graph = &pipe->graph;
- struct media_entity *entity_err = entity;
+ struct media_pad *pad = entity->pads;
+ struct media_pad *pad_err = pad;
struct media_link *link;
int ret;
@@ -426,9 +427,11 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
goto error_graph_walk_start;
}
- media_graph_walk_start(&pipe->graph, entity->pads);
+ media_graph_walk_start(&pipe->graph, pad);
+
+ while ((pad = media_graph_walk_next(graph))) {
+ struct media_entity *entity = pad->entity;
- while ((entity = media_graph_walk_next(graph))) {
DECLARE_BITMAP(active, MEDIA_ENTITY_MAX_PADS);
DECLARE_BITMAP(has_no_links, MEDIA_ENTITY_MAX_PADS);
@@ -452,11 +455,11 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
bitmap_fill(has_no_links, entity->num_pads);
list_for_each_entry(link, &entity->links, list) {
- struct media_pad *pad = link->sink->entity == entity
- ? link->sink : link->source;
+ struct media_pad *other_pad = link->sink->entity == entity
+ ? link->sink : link->source;
/* Mark that a pad is connected by a link. */
- bitmap_clear(has_no_links, pad->index, 1);
+ bitmap_clear(has_no_links, other_pad->index, 1);
/*
* Pads that either do not need to connect or
@@ -465,13 +468,13 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
*/
if (!(pad->flags & MEDIA_PAD_FL_MUST_CONNECT) ||
link->flags & MEDIA_LNK_FL_ENABLED)
- bitmap_set(active, pad->index, 1);
+ bitmap_set(active, other_pad->index, 1);
/*
* Link validation will only take place for
* sink ends of the link that are enabled.
*/
- if (link->sink != pad ||
+ if (link->sink != other_pad ||
!(link->flags & MEDIA_LNK_FL_ENABLED))
continue;
@@ -507,9 +510,11 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
* Link validation on graph failed. We revert what we did and
* return the error.
*/
- media_graph_walk_start(graph, entity_err->pads);
+ media_graph_walk_start(graph, pad_err);
+
+ while ((pad_err = media_graph_walk_next(graph))) {
+ struct media_entity *entity_err = pad_err->entity;
- while ((entity_err = media_graph_walk_next(graph))) {
/* Sanity check for negative stream_count */
if (!WARN_ON_ONCE(entity_err->stream_count <= 0)) {
entity_err->stream_count--;
@@ -521,7 +526,7 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
* We haven't increased stream_count further than this
* so we quit here.
*/
- if (entity_err == entity)
+ if (pad_err == pad)
break;
}
@@ -548,8 +553,9 @@ EXPORT_SYMBOL_GPL(media_pipeline_start);
void __media_pipeline_stop(struct media_entity *entity)
{
- struct media_graph *graph = &entity->pipe->graph;
struct media_pipeline *pipe = entity->pipe;
+ struct media_graph *graph = &pipe->graph;
+ struct media_pad *pad;
/*
* If the following check fails, the driver has performed an
@@ -560,7 +566,9 @@ void __media_pipeline_stop(struct media_entity *entity)
media_graph_walk_start(graph, entity->pads);
- while ((entity = media_graph_walk_next(graph))) {
+ while ((pad = media_graph_walk_next(graph))) {
+ struct media_entity *entity = pad->entity;
+
/* Sanity check for negative stream_count */
if (!WARN_ON_ONCE(entity->stream_count <= 0)) {
entity->stream_count--;
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 4e7aa9a37f22b904..0f71b56f02ceb8ab 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -1124,7 +1124,7 @@ static int __fimc_md_modify_pipeline(struct media_entity *entity, bool enable)
static int __fimc_md_modify_pipelines(struct media_entity *entity, bool enable,
struct media_graph *graph)
{
- struct media_entity *entity_err = entity;
+ struct media_pad *pad, *pad_err = entity->pads;
int ret;
/*
@@ -1133,13 +1133,13 @@ static int __fimc_md_modify_pipelines(struct media_entity *entity, bool enable,
* through active links. This is needed as we cannot power on/off the
* subdevs in random order.
*/
- media_graph_walk_start(graph, entity->pads);
+ media_graph_walk_start(graph, pad_err);
- while ((entity = media_graph_walk_next(graph))) {
- if (!is_media_entity_v4l2_video_device(entity))
+ while ((pad = media_graph_walk_next(graph))) {
+ if (!is_media_entity_v4l2_video_device(pad->entity))
continue;
- ret = __fimc_md_modify_pipeline(entity, enable);
+ ret = __fimc_md_modify_pipeline(pad->entity, enable);
if (ret < 0)
goto err;
@@ -1148,15 +1148,15 @@ static int __fimc_md_modify_pipelines(struct media_entity *entity, bool enable,
return 0;
err:
- media_graph_walk_start(graph, entity_err->pads);
+ media_graph_walk_start(graph, pad_err);
- while ((entity_err = media_graph_walk_next(graph))) {
- if (!is_media_entity_v4l2_video_device(entity_err))
+ while ((pad_err = media_graph_walk_next(graph))) {
+ if (!is_media_entity_v4l2_video_device(pad_err->entity))
continue;
- __fimc_md_modify_pipeline(entity_err, !enable);
+ __fimc_md_modify_pipeline(pad_err->entity, !enable);
- if (entity_err == entity)
+ if (pad_err == pad)
break;
}
diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c
index 218220b0a3ebb781..1f52779249cfaf60 100644
--- a/drivers/media/platform/omap3isp/ispvideo.c
+++ b/drivers/media/platform/omap3isp/ispvideo.c
@@ -226,8 +226,8 @@ static int isp_video_get_graph_data(struct isp_video *video,
struct isp_pipeline *pipe)
{
struct media_graph graph;
- struct media_entity *entity = &video->video.entity;
- struct media_device *mdev = entity->graph_obj.mdev;
+ struct media_pad *pad = video->video.entity.pads;
+ struct media_device *mdev = pad->entity->graph_obj.mdev;
struct isp_video *far_end = NULL;
int ret;
@@ -238,23 +238,24 @@ static int isp_video_get_graph_data(struct isp_video *video,
return ret;
}
- media_graph_walk_start(&graph, entity->pads);
+ media_graph_walk_start(&graph, pad);
- while ((entity = media_graph_walk_next(&graph))) {
+ while ((pad = media_graph_walk_next(&graph))) {
struct isp_video *__video;
- media_entity_enum_set(&pipe->ent_enum, entity);
+ media_entity_enum_set(&pipe->ent_enum, pad->entity);
if (far_end != NULL)
continue;
- if (entity == &video->video.entity)
+ if (pad == video->video.entity.pads)
continue;
- if (!is_media_entity_v4l2_video_device(entity))
+ if (!is_media_entity_v4l2_video_device(pad->entity))
continue;
- __video = to_isp_video(media_entity_to_video_device(entity));
+ __video = to_isp_video(media_entity_to_video_device(
+ pad->entity));
if (__video->type != video->type)
far_end = __video;
}
diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c
index da75847a61f3be63..f3e7f239e90c5f7d 100644
--- a/drivers/media/platform/vsp1/vsp1_video.c
+++ b/drivers/media/platform/vsp1/vsp1_video.c
@@ -573,8 +573,8 @@ static int vsp1_video_pipeline_build(struct vsp1_pipeline *pipe,
struct vsp1_video *video)
{
struct media_graph graph;
- struct media_entity *entity = &video->video.entity;
- struct media_device *mdev = entity->graph_obj.mdev;
+ struct media_pad *pad = video->video.entity.pads;
+ struct media_device *mdev = pad->entity->graph_obj.mdev;
unsigned int i;
int ret;
@@ -583,17 +583,17 @@ static int vsp1_video_pipeline_build(struct vsp1_pipeline *pipe,
if (ret)
return ret;
- media_graph_walk_start(&graph, entity->pads);
+ media_graph_walk_start(&graph, pad);
- while ((entity = media_graph_walk_next(&graph))) {
+ while ((pad = media_graph_walk_next(&graph))) {
struct v4l2_subdev *subdev;
struct vsp1_rwpf *rwpf;
struct vsp1_entity *e;
- if (!is_media_entity_v4l2_subdev(entity))
+ if (!is_media_entity_v4l2_subdev(pad->entity))
continue;
- subdev = media_entity_to_v4l2_subdev(entity);
+ subdev = media_entity_to_v4l2_subdev(pad->entity);
e = to_vsp1_entity(subdev);
list_add_tail(&e->list_pipe, &pipe->entities);
e->pipe = pipe;
diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c
index ba767fa707e39dc4..9f0a53238d510fce 100644
--- a/drivers/media/platform/xilinx/xilinx-dma.c
+++ b/drivers/media/platform/xilinx/xilinx-dma.c
@@ -178,8 +178,8 @@ static int xvip_pipeline_validate(struct xvip_pipeline *pipe,
struct xvip_dma *start)
{
struct media_graph graph;
- struct media_entity *entity = &start->video.entity;
- struct media_device *mdev = entity->graph_obj.mdev;
+ struct media_pad *pad = start->video.entity.pads;
+ struct media_device *mdev = pad->entity->graph_obj.mdev;
unsigned int num_inputs = 0;
unsigned int num_outputs = 0;
int ret;
@@ -193,15 +193,15 @@ static int xvip_pipeline_validate(struct xvip_pipeline *pipe,
return ret;
}
- media_graph_walk_start(&graph, entity->pads);
+ media_graph_walk_start(&graph, pad);
- while ((entity = media_graph_walk_next(&graph))) {
+ while ((pad = media_graph_walk_next(&graph))) {
struct xvip_dma *dma;
- if (entity->function != MEDIA_ENT_F_IO_V4L)
+ if (pad->entity->function != MEDIA_ENT_F_IO_V4L)
continue;
- dma = to_xvip_dma(media_entity_to_video_device(entity));
+ dma = to_xvip_dma(media_entity_to_video_device(pad->entity));
if (dma->pad.flags & MEDIA_PAD_FL_SINK) {
pipe->output = dma;
diff --git a/drivers/media/v4l2-core/v4l2-mc.c b/drivers/media/v4l2-core/v4l2-mc.c
index c8adddb878cbd3b5..d923bb344b6aeb97 100644
--- a/drivers/media/v4l2-core/v4l2-mc.c
+++ b/drivers/media/v4l2-core/v4l2-mc.c
@@ -258,13 +258,14 @@ EXPORT_SYMBOL_GPL(v4l_vb2q_enable_media_source);
static int pipeline_pm_use_count(struct media_entity *entity,
struct media_graph *graph)
{
+ struct media_pad *pad;
int use = 0;
media_graph_walk_start(graph, entity->pads);
- while ((entity = media_graph_walk_next(graph))) {
- if (is_media_entity_v4l2_video_device(entity))
- use += entity->use_count;
+ while ((pad = media_graph_walk_next(graph))) {
+ if (is_media_entity_v4l2_video_device(pad->entity))
+ use += pad->entity->use_count;
}
return use;
@@ -317,7 +318,7 @@ static int pipeline_pm_power_one(struct media_entity *entity, int change)
static int pipeline_pm_power(struct media_entity *entity, int change,
struct media_graph *graph)
{
- struct media_entity *first = entity;
+ struct media_pad *tmp_pad, *pad;
int ret = 0;
if (!change)
@@ -325,19 +326,19 @@ static int pipeline_pm_power(struct media_entity *entity, int change,
media_graph_walk_start(graph, entity->pads);
- while (!ret && (entity = media_graph_walk_next(graph)))
- if (is_media_entity_v4l2_subdev(entity))
- ret = pipeline_pm_power_one(entity, change);
+ while (!ret && (pad = media_graph_walk_next(graph)))
+ if (is_media_entity_v4l2_subdev(pad->entity))
+ ret = pipeline_pm_power_one(pad->entity, change);
if (!ret)
return ret;
- media_graph_walk_start(graph, first->pads);
+ media_graph_walk_start(graph, entity->pads);
- while ((first = media_graph_walk_next(graph))
- && first != entity)
- if (is_media_entity_v4l2_subdev(first))
- pipeline_pm_power_one(first, -change);
+ while ((tmp_pad = media_graph_walk_next(graph))
+ && tmp_pad != pad)
+ if (is_media_entity_v4l2_subdev(tmp_pad->entity))
+ pipeline_pm_power_one(tmp_pad->entity, -change);
return ret;
}
diff --git a/drivers/staging/media/davinci_vpfe/vpfe_video.c b/drivers/staging/media/davinci_vpfe/vpfe_video.c
index af0d9e81b8de1cad..34f3754a9dea9a45 100644
--- a/drivers/staging/media/davinci_vpfe/vpfe_video.c
+++ b/drivers/staging/media/davinci_vpfe/vpfe_video.c
@@ -130,8 +130,8 @@ __vpfe_video_get_format(struct vpfe_video_device *video,
static int vpfe_prepare_pipeline(struct vpfe_video_device *video)
{
struct media_graph graph;
- struct media_entity *entity = &video->video_dev.entity;
- struct media_device *mdev = entity->graph_obj.mdev;
+ struct media_pad *pad = video->video_dev.entity.pads;
+ struct media_device *mdev = pad->entity->graph_obj.mdev;
struct vpfe_pipeline *pipe = &video->pipe;
struct vpfe_video_device *far_end = NULL;
int ret;
@@ -150,13 +150,14 @@ static int vpfe_prepare_pipeline(struct vpfe_video_device *video)
mutex_unlock(&mdev->graph_mutex);
return -ENOMEM;
}
- media_graph_walk_start(&graph, entity->pads);
- while ((entity = media_graph_walk_next(&graph))) {
- if (entity == &video->video_dev.entity)
+ media_graph_walk_start(&graph, pad);
+ while ((pad = media_graph_walk_next(&graph))) {
+ if (pad->entity == &video->video_dev.entity)
continue;
- if (!is_media_entity_v4l2_video_device(entity))
+ if (!is_media_entity_v4l2_video_device(pad->entity))
continue;
- far_end = to_vpfe_video(media_entity_to_video_device(entity));
+ far_end = to_vpfe_video(media_entity_to_video_device(
+ pad->entity));
if (far_end->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
pipe->inputs[pipe->input_num++] = far_end;
else
@@ -288,27 +289,27 @@ static int vpfe_video_validate_pipeline(struct vpfe_pipeline *pipe)
*/
static int vpfe_pipeline_enable(struct vpfe_pipeline *pipe)
{
- struct media_entity *entity;
+ struct media_pad *pad;
struct v4l2_subdev *subdev;
struct media_device *mdev;
int ret;
if (pipe->state == VPFE_PIPELINE_STREAM_CONTINUOUS)
- entity = vpfe_get_input_entity(pipe->outputs[0]);
+ pad = vpfe_get_input_entity(pipe->outputs[0])->pads;
else
- entity = &pipe->inputs[0]->video_dev.entity;
+ pad = pipe->inputs[0]->video_dev.entity.pads;
- mdev = entity->graph_obj.mdev;
+ mdev = pad->graph_obj.mdev;
mutex_lock(&mdev->graph_mutex);
ret = media_graph_walk_init(&pipe->graph, mdev);
if (ret)
goto out;
- media_graph_walk_start(&pipe->graph, entity->pads);
- while ((entity = media_graph_walk_next(&pipe->graph))) {
+ media_graph_walk_start(&pipe->graph, pad);
+ while ((pad = media_graph_walk_next(&pipe->graph))) {
- if (!is_media_entity_v4l2_subdev(entity))
+ if (!is_media_entity_v4l2_subdev(pad->entity))
continue;
- subdev = media_entity_to_v4l2_subdev(entity);
+ subdev = media_entity_to_v4l2_subdev(pad->entity);
ret = v4l2_subdev_call(subdev, video, s_stream, 1);
if (ret < 0 && ret != -ENOIOCTLCMD)
break;
@@ -333,25 +334,25 @@ static int vpfe_pipeline_enable(struct vpfe_pipeline *pipe)
*/
static int vpfe_pipeline_disable(struct vpfe_pipeline *pipe)
{
- struct media_entity *entity;
+ struct media_pad *pad;
struct v4l2_subdev *subdev;
struct media_device *mdev;
int ret = 0;
if (pipe->state == VPFE_PIPELINE_STREAM_CONTINUOUS)
- entity = vpfe_get_input_entity(pipe->outputs[0]);
+ pad = vpfe_get_input_entity(pipe->outputs[0])->pads;
else
- entity = &pipe->inputs[0]->video_dev.entity;
+ pad = pipe->inputs[0]->video_dev.entity.pads;
- mdev = entity->graph_obj.mdev;
+ mdev = pad->graph_obj.mdev;
mutex_lock(&mdev->graph_mutex);
- media_graph_walk_start(&pipe->graph, entity->pads);
+ media_graph_walk_start(&pipe->graph, pad);
- while ((entity = media_graph_walk_next(&pipe->graph))) {
+ while ((pad = media_graph_walk_next(&pipe->graph))) {
- if (!is_media_entity_v4l2_subdev(entity))
+ if (!is_media_entity_v4l2_subdev(pad->entity))
continue;
- subdev = media_entity_to_v4l2_subdev(entity);
+ subdev = media_entity_to_v4l2_subdev(pad->entity);
ret = v4l2_subdev_call(subdev, video, s_stream, 0);
if (ret < 0 && ret != -ENOIOCTLCMD)
break;
diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c
index b646fe909bad64d4..28efafa0621ef010 100644
--- a/drivers/staging/media/omap4iss/iss_video.c
+++ b/drivers/staging/media/omap4iss/iss_video.c
@@ -209,8 +209,8 @@ static struct iss_video *
iss_video_far_end(struct iss_video *video)
{
struct media_graph graph;
- struct media_entity *entity = &video->video.entity;
- struct media_device *mdev = entity->graph_obj.mdev;
+ struct media_pad *pad = video->video.entity.pads;
+ struct media_device *mdev = pad->entity->graph_obj.mdev;
struct iss_video *far_end = NULL;
mutex_lock(&mdev->graph_mutex);
@@ -220,16 +220,17 @@ iss_video_far_end(struct iss_video *video)
return NULL;
}
- media_graph_walk_start(&graph, entity->pads);
+ media_graph_walk_start(&graph, pad);
- while ((entity = media_graph_walk_next(&graph))) {
- if (entity == &video->video.entity)
+ while ((pad = media_graph_walk_next(&graph))) {
+ if (pad->entity == &video->video.entity)
continue;
- if (!is_media_entity_v4l2_video_device(entity))
+ if (!is_media_entity_v4l2_video_device(pad->entity))
continue;
- far_end = to_iss_video(media_entity_to_video_device(entity));
+ far_end = to_iss_video(media_entity_to_video_device(
+ pad->entity));
if (far_end->type != video->type)
break;
@@ -863,7 +864,7 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
struct iss_video_fh *vfh = to_iss_video_fh(fh);
struct iss_video *video = video_drvdata(file);
struct media_graph graph;
- struct media_entity *entity = &video->video.entity;
+ struct media_pad *pad = video->video.entity.pads;
enum iss_pipeline_state state;
struct iss_pipeline *pipe;
struct iss_video *far_end;
@@ -879,30 +880,31 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
* Start streaming on the pipeline. No link touching an entity in the
* pipeline can be activated or deactivated once streaming is started.
*/
- pipe = entity->pipe
- ? to_iss_pipeline(entity) : &video->pipe;
+ pipe = pad->entity->pipe
+ ? to_iss_pipeline(pad->entity) : &video->pipe;
pipe->external = NULL;
pipe->external_rate = 0;
pipe->external_bpp = 0;
- ret = media_entity_enum_init(&pipe->ent_enum, entity->graph_obj.mdev);
+ ret = media_entity_enum_init(&pipe->ent_enum,
+ pad->entity->graph_obj.mdev);
if (ret)
goto err_graph_walk_init;
- ret = media_graph_walk_init(&graph, entity->graph_obj.mdev);
+ ret = media_graph_walk_init(&graph, pad->entity->graph_obj.mdev);
if (ret)
goto err_graph_walk_init;
if (video->iss->pdata->set_constraints)
video->iss->pdata->set_constraints(video->iss, true);
- ret = media_pipeline_start(entity, &pipe->pipe);
+ ret = media_pipeline_start(pad->entity, &pipe->pipe);
if (ret < 0)
goto err_media_pipeline_start;
- media_graph_walk_start(&graph, entity->pads);
- while ((entity = media_graph_walk_next(&graph)))
- media_entity_enum_set(&pipe->ent_enum, entity);
+ media_graph_walk_start(&graph, pad);
+ while ((pad = media_graph_walk_next(&graph)))
+ media_entity_enum_set(&pipe->ent_enum, pad->entity);
/*
* Verify that the currently configured format matches the output of
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index c844a677a1cfbb0d..fad1776cbaadbbab 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -904,10 +904,11 @@ void media_graph_walk_start(struct media_graph *graph, struct media_pad *pad);
* The graph structure must have been previously initialized with a call to
* media_graph_walk_start().
*
- * Return: returns the next entity in the graph or %NULL if the whole graph
- * have been traversed.
+ * Return: returns the next pad in the graph or %NULL if the whole
+ * graph have been traversed. The pad which is returned is the pad
+ * through which a new entity is reached when parsing the graph.
*/
-struct media_entity *media_graph_walk_next(struct media_graph *graph);
+struct media_pad *media_graph_walk_next(struct media_graph *graph);
/**
* media_pipeline_start - Mark a pipeline as streaming
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 04/30] v4l: mc: Start walk from a specific pad in use count calculation
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (2 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 03/30] media: entity: Walk the graph based on pads Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 05/30] media: entity: Move the pipeline from entity to pads Niklas Söderlund
` (26 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
With the addition of the recent has_route() media entity op, the pads of a
media entity are no longer all interconnected. This has to be taken into
account in power management.
Prepare for the addition of a helper function supporting S_ROUTING.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/v4l2-core/v4l2-mc.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-mc.c b/drivers/media/v4l2-core/v4l2-mc.c
index d923bb344b6aeb97..f702cac5205b3447 100644
--- a/drivers/media/v4l2-core/v4l2-mc.c
+++ b/drivers/media/v4l2-core/v4l2-mc.c
@@ -251,17 +251,16 @@ EXPORT_SYMBOL_GPL(v4l_vb2q_enable_media_source);
/*
* pipeline_pm_use_count - Count the number of users of a pipeline
- * @entity: The entity
+ * @pad: The pad
*
* Return the total number of users of all video device nodes in the pipeline.
*/
-static int pipeline_pm_use_count(struct media_entity *entity,
- struct media_graph *graph)
+static int pipeline_pm_use_count(struct media_pad *pad,
+ struct media_graph *graph)
{
- struct media_pad *pad;
int use = 0;
- media_graph_walk_start(graph, entity->pads);
+ media_graph_walk_start(graph, pad);
while ((pad = media_graph_walk_next(graph))) {
if (is_media_entity_v4l2_video_device(pad->entity))
@@ -307,7 +306,7 @@ static int pipeline_pm_power_one(struct media_entity *entity, int change)
/*
* pipeline_pm_power - Apply power change to all entities in a pipeline
- * @entity: The entity
+ * @pad: The pad
* @change: Use count change
*
* Walk the pipeline to update the use count and the power state of all non-node
@@ -315,16 +314,16 @@ static int pipeline_pm_power_one(struct media_entity *entity, int change)
*
* Return 0 on success or a negative error code on failure.
*/
-static int pipeline_pm_power(struct media_entity *entity, int change,
+static int pipeline_pm_power(struct media_pad *pad, int change,
struct media_graph *graph)
{
- struct media_pad *tmp_pad, *pad;
+ struct media_pad *tmp_pad, *first = pad;
int ret = 0;
if (!change)
return 0;
- media_graph_walk_start(graph, entity->pads);
+ media_graph_walk_start(graph, pad);
while (!ret && (pad = media_graph_walk_next(graph)))
if (is_media_entity_v4l2_subdev(pad->entity))
@@ -333,7 +332,7 @@ static int pipeline_pm_power(struct media_entity *entity, int change,
if (!ret)
return ret;
- media_graph_walk_start(graph, entity->pads);
+ media_graph_walk_start(graph, first);
while ((tmp_pad = media_graph_walk_next(graph))
&& tmp_pad != pad)
@@ -356,7 +355,7 @@ int v4l2_pipeline_pm_use(struct media_entity *entity, int use)
WARN_ON(entity->use_count < 0);
/* Apply power change to connected non-nodes. */
- ret = pipeline_pm_power(entity, change, &mdev->pm_count_walk);
+ ret = pipeline_pm_power(entity->pads, change, &mdev->pm_count_walk);
if (ret < 0)
entity->use_count -= change;
@@ -370,8 +369,8 @@ int v4l2_pipeline_link_notify(struct media_link *link, u32 flags,
unsigned int notification)
{
struct media_graph *graph = &link->graph_obj.mdev->pm_count_walk;
- struct media_entity *source = link->source->entity;
- struct media_entity *sink = link->sink->entity;
+ struct media_pad *source = link->source;
+ struct media_pad *sink = link->sink;
int source_use;
int sink_use;
int ret = 0;
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 05/30] media: entity: Move the pipeline from entity to pads
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (3 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 04/30] v4l: mc: Start walk from a specific pad in use count calculation Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 06/30] media: entity: Use pad as the starting point for a pipeline Niklas Söderlund
` (25 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
This moves the pipe and stream_count fields from struct media_entity to
struct media_pad. Effectively streams become pad-specific rather than
being stream specific, allowing several independent streams to traverse a
single entity.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/media-entity.c | 61 ++++++++++++-------
drivers/media/platform/exynos4-is/fimc-isp.c | 2 +-
drivers/media/platform/exynos4-is/fimc-lite.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/platform/omap3isp/ispvideo.c | 2 +-
drivers/media/platform/omap3isp/ispvideo.h | 2 +-
drivers/media/platform/rcar-vin/rcar-dma.c | 2 +-
drivers/media/platform/xilinx/xilinx-dma.c | 2 +-
drivers/media/platform/xilinx/xilinx-dma.h | 2 +-
drivers/staging/media/imx/imx-media-utils.c | 2 +-
drivers/staging/media/omap4iss/iss.c | 2 +-
drivers/staging/media/omap4iss/iss_video.c | 2 +-
drivers/staging/media/omap4iss/iss_video.h | 2 +-
include/media/media-entity.h | 17 ++++--
14 files changed, 61 insertions(+), 41 deletions(-)
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index ec7c61dff6ae879d..239036a7582cbc95 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -419,7 +419,7 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
struct media_pad *pad = entity->pads;
struct media_pad *pad_err = pad;
struct media_link *link;
- int ret;
+ int ret = 0;
if (!pipe->streaming_count++) {
ret = media_graph_walk_init(&pipe->graph, mdev);
@@ -431,21 +431,27 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
while ((pad = media_graph_walk_next(graph))) {
struct media_entity *entity = pad->entity;
+ unsigned int i;
+ bool skip_validation = pad->pipe;
DECLARE_BITMAP(active, MEDIA_ENTITY_MAX_PADS);
DECLARE_BITMAP(has_no_links, MEDIA_ENTITY_MAX_PADS);
- entity->stream_count++;
+ for (i = 0; i < entity->num_pads; i++) {
+ struct media_pad *iter = &entity->pads[i];
- if (WARN_ON(entity->pipe && entity->pipe != pipe)) {
- ret = -EBUSY;
- goto error;
+ if (iter->pipe && WARN_ON(iter->pipe != pipe))
+ ret = -EBUSY;
+ else
+ iter->pipe = pipe;
+ iter->stream_count++;
}
- entity->pipe = pipe;
+ if (ret)
+ goto error;
/* Already streaming --- no need to check. */
- if (entity->stream_count > 1)
+ if (skip_validation)
continue;
if (!entity->ops || !entity->ops->link_validate)
@@ -514,19 +520,24 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
while ((pad_err = media_graph_walk_next(graph))) {
struct media_entity *entity_err = pad_err->entity;
+ unsigned int i;
+
+ for (i = 0; i < entity_err->num_pads; i++) {
+ struct media_pad *iter = &entity_err->pads[i];
- /* Sanity check for negative stream_count */
- if (!WARN_ON_ONCE(entity_err->stream_count <= 0)) {
- entity_err->stream_count--;
- if (entity_err->stream_count == 0)
- entity_err->pipe = NULL;
+ /* Sanity check for negative stream_count */
+ if (!WARN_ON_ONCE(iter->stream_count <= 0)) {
+ --iter->stream_count;
+ if (iter->stream_count == 0)
+ iter->pipe = NULL;
+ }
}
/*
* We haven't increased stream_count further than this
* so we quit here.
*/
- if (pad_err == pad)
+ if (pad_err->entity == pad->entity)
break;
}
@@ -553,7 +564,7 @@ EXPORT_SYMBOL_GPL(media_pipeline_start);
void __media_pipeline_stop(struct media_entity *entity)
{
- struct media_pipeline *pipe = entity->pipe;
+ struct media_pipeline *pipe = entity->pads->pipe;
struct media_graph *graph = &pipe->graph;
struct media_pad *pad;
@@ -567,13 +578,17 @@ void __media_pipeline_stop(struct media_entity *entity)
media_graph_walk_start(graph, entity->pads);
while ((pad = media_graph_walk_next(graph))) {
- struct media_entity *entity = pad->entity;
+ unsigned int i;
- /* Sanity check for negative stream_count */
- if (!WARN_ON_ONCE(entity->stream_count <= 0)) {
- entity->stream_count--;
- if (entity->stream_count == 0)
- entity->pipe = NULL;
+ for (i = 0; i < entity->num_pads; i++) {
+ struct media_pad *iter = &entity->pads[i];
+
+ /* Sanity check for negative stream_count */
+ if (!WARN_ON_ONCE(iter->stream_count <= 0)) {
+ iter->stream_count--;
+ if (iter->stream_count == 0)
+ iter->pipe = NULL;
+ }
}
}
@@ -839,7 +854,7 @@ int __media_entity_setup_link(struct media_link *link, u32 flags)
{
const u32 mask = MEDIA_LNK_FL_ENABLED;
struct media_device *mdev;
- struct media_entity *source, *sink;
+ struct media_pad *source, *sink;
int ret = -EBUSY;
if (link == NULL)
@@ -855,8 +870,8 @@ int __media_entity_setup_link(struct media_link *link, u32 flags)
if (link->flags == flags)
return 0;
- source = link->source->entity;
- sink = link->sink->entity;
+ source = link->source;
+ sink = link->sink;
if (!(link->flags & MEDIA_LNK_FL_DYNAMIC) &&
(source->stream_count || sink->stream_count))
diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c
index 9a48c0f69320ba35..79d128a57e87fd58 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp.c
@@ -229,7 +229,7 @@ static int fimc_isp_subdev_set_fmt(struct v4l2_subdev *sd,
}
}
} else {
- if (sd->entity.stream_count == 0) {
+ if (sd->entity.pads->stream_count == 0) {
if (fmt->pad == FIMC_ISP_SD_PAD_SINK) {
struct v4l2_subdev_format format = *fmt;
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index 70d5f5586a5d5ca6..f486eeed805b0bbc 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -1096,7 +1096,7 @@ static int fimc_lite_subdev_set_fmt(struct v4l2_subdev *sd,
mutex_lock(&fimc->lock);
if ((atomic_read(&fimc->out_path) == FIMC_IO_ISP &&
- sd->entity.stream_count > 0) ||
+ sd->entity.pads->stream_count > 0) ||
(atomic_read(&fimc->out_path) == FIMC_IO_DMA &&
vb2_is_busy(&fimc->vb_queue))) {
mutex_unlock(&fimc->lock);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 842e2235047d9c63..c487efe8c153942b 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -927,7 +927,7 @@ static int isp_pipeline_is_last(struct media_entity *me)
struct isp_pipeline *pipe;
struct media_pad *pad;
- if (!me->pipe)
+ if (!me->pads->pipe)
return 0;
pipe = to_isp_pipeline(me);
if (pipe->stream_state == ISP_PIPELINE_STREAM_STOPPED)
diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c
index 1f52779249cfaf60..5ac7ac8c98d52ac8 100644
--- a/drivers/media/platform/omap3isp/ispvideo.c
+++ b/drivers/media/platform/omap3isp/ispvideo.c
@@ -1102,7 +1102,7 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
/* Start streaming on the pipeline. No link touching an entity in the
* pipeline can be activated or deactivated once streaming is started.
*/
- pipe = video->video.entity.pipe
+ pipe = video->video.entity.pads->pipe
? to_isp_pipeline(&video->video.entity) : &video->pipe;
ret = media_entity_enum_init(&pipe->ent_enum, &video->isp->media_dev);
diff --git a/drivers/media/platform/omap3isp/ispvideo.h b/drivers/media/platform/omap3isp/ispvideo.h
index f6a2082b4a0a7708..8f4146c25a1b1293 100644
--- a/drivers/media/platform/omap3isp/ispvideo.h
+++ b/drivers/media/platform/omap3isp/ispvideo.h
@@ -103,7 +103,7 @@ struct isp_pipeline {
};
#define to_isp_pipeline(__e) \
- container_of((__e)->pipe, struct isp_pipeline, pipe)
+ container_of((__e)->pads->pipe, struct isp_pipeline, pipe)
static inline int isp_pipeline_ready(struct isp_pipeline *pipe)
{
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 92323310f7352147..e749096926f34d4a 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -1128,7 +1128,7 @@ static int rvin_set_stream(struct rvin_dev *vin, int on)
*/
mdev = vin->vdev.entity.graph_obj.mdev;
mutex_lock(&mdev->graph_mutex);
- pipe = sd->entity.pipe ? sd->entity.pipe : &vin->vdev.pipe;
+ pipe = sd->entity.pads->pipe ? sd->entity.pads->pipe : &vin->vdev.pipe;
ret = __media_pipeline_start(&vin->vdev.entity, pipe);
mutex_unlock(&mdev->graph_mutex);
if (ret)
diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c
index 9f0a53238d510fce..9ea9a58eec632b7b 100644
--- a/drivers/media/platform/xilinx/xilinx-dma.c
+++ b/drivers/media/platform/xilinx/xilinx-dma.c
@@ -406,7 +406,7 @@ static int xvip_dma_start_streaming(struct vb2_queue *vq, unsigned int count)
* Use the pipeline object embedded in the first DMA object that starts
* streaming.
*/
- pipe = dma->video.entity.pipe
+ pipe = dma->video.entity.pads->pipe
? to_xvip_pipeline(&dma->video.entity) : &dma->pipe;
ret = media_pipeline_start(&dma->video.entity, &pipe->pipe);
diff --git a/drivers/media/platform/xilinx/xilinx-dma.h b/drivers/media/platform/xilinx/xilinx-dma.h
index e95d136c153a8f5f..c12e053ff41eed1c 100644
--- a/drivers/media/platform/xilinx/xilinx-dma.h
+++ b/drivers/media/platform/xilinx/xilinx-dma.h
@@ -50,7 +50,7 @@ struct xvip_pipeline {
static inline struct xvip_pipeline *to_xvip_pipeline(struct media_entity *e)
{
- return container_of(e->pipe, struct xvip_pipeline, pipe);
+ return container_of(e->pads->pipe, struct xvip_pipeline, pipe);
}
/**
diff --git a/drivers/staging/media/imx/imx-media-utils.c b/drivers/staging/media/imx/imx-media-utils.c
index 8aa13403b09d15f6..1cfa77a96e610f6c 100644
--- a/drivers/staging/media/imx/imx-media-utils.c
+++ b/drivers/staging/media/imx/imx-media-utils.c
@@ -917,7 +917,7 @@ int imx_media_pipeline_set_stream(struct imx_media_dev *imxmd,
__media_pipeline_stop(entity);
} else {
v4l2_subdev_call(sd, video, s_stream, 0);
- if (entity->pipe)
+ if (entity->pads->pipe)
__media_pipeline_stop(entity);
}
diff --git a/drivers/staging/media/omap4iss/iss.c b/drivers/staging/media/omap4iss/iss.c
index b1036baebb0357e7..6785363c09e9ba43 100644
--- a/drivers/staging/media/omap4iss/iss.c
+++ b/drivers/staging/media/omap4iss/iss.c
@@ -547,7 +547,7 @@ static int iss_pipeline_is_last(struct media_entity *me)
struct iss_pipeline *pipe;
struct media_pad *pad;
- if (!me->pipe)
+ if (!me->pads->pipe)
return 0;
pipe = to_iss_pipeline(me);
if (pipe->stream_state == ISS_PIPELINE_STREAM_STOPPED)
diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c
index 28efafa0621ef010..d1d91a79992a61bc 100644
--- a/drivers/staging/media/omap4iss/iss_video.c
+++ b/drivers/staging/media/omap4iss/iss_video.c
@@ -880,7 +880,7 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
* Start streaming on the pipeline. No link touching an entity in the
* pipeline can be activated or deactivated once streaming is started.
*/
- pipe = pad->entity->pipe
+ pipe = pad->pipe
? to_iss_pipeline(pad->entity) : &video->pipe;
pipe->external = NULL;
pipe->external_rate = 0;
diff --git a/drivers/staging/media/omap4iss/iss_video.h b/drivers/staging/media/omap4iss/iss_video.h
index d7e05d04512c5176..8e57a92a622c4145 100644
--- a/drivers/staging/media/omap4iss/iss_video.h
+++ b/drivers/staging/media/omap4iss/iss_video.h
@@ -98,7 +98,7 @@ struct iss_pipeline {
};
#define to_iss_pipeline(__e) \
- container_of((__e)->pipe, struct iss_pipeline, pipe)
+ container_of((__e)->pads->pipe, struct iss_pipeline, pipe)
static inline int iss_pipeline_ready(struct iss_pipeline *pipe)
{
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index fad1776cbaadbbab..4f68638153679a36 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -160,14 +160,24 @@ struct media_link {
*
* @graph_obj: Embedded structure containing the media object common data
* @entity: Entity this pad belongs to
+ * @pipe: Pipeline this entity belongs to.
+ * @stream_count: Stream count for the entity.
* @index: Pad index in the entity pads array, numbered from 0 to n
* @flags: Pad flags, as defined in
* :ref:`include/uapi/linux/media.h <media_header>`
* (seek for ``MEDIA_PAD_FL_*``)
+ * .. note::
+ *
+ * @stream_count reference counts must never be negative, but are
+ * signed integers on purpose: a simple ``WARN_ON(<0)`` check can
+ * be used to detect reference count bugs that would make them
+ * negative.
*/
struct media_pad {
struct media_gobj graph_obj; /* must be first field in struct */
struct media_entity *entity;
+ struct media_pipeline *pipe;
+ int stream_count;
u16 index;
unsigned long flags;
};
@@ -244,9 +254,7 @@ enum media_entity_type {
* @pads: Pads array with the size defined by @num_pads.
* @links: List of data links.
* @ops: Entity operations.
- * @stream_count: Stream count for the entity.
* @use_count: Use count for the entity.
- * @pipe: Pipeline this entity belongs to.
* @info: Union with devnode information. Kept just for backward
* compatibility.
* @info.dev: Contains device major and minor info.
@@ -259,7 +267,7 @@ enum media_entity_type {
*
* .. note::
*
- * @stream_count and @use_count reference counts must never be
+ * @use_count reference counts must never be
* negative, but are signed integers on purpose: a simple ``WARN_ON(<0)``
* check can be used to detect reference count bugs that would make them
* negative.
@@ -281,11 +289,8 @@ struct media_entity {
const struct media_entity_operations *ops;
- int stream_count;
int use_count;
- struct media_pipeline *pipe;
-
union {
struct {
u32 major;
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 06/30] media: entity: Use pad as the starting point for a pipeline
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (4 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 05/30] media: entity: Move the pipeline from entity to pads Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 07/30] media: entity: Add has_route entity operation Niklas Söderlund
` (24 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Niklas Söderlund
From: Sakari Ailus <sakari.ailus@linux.intel.com>
The pipeline will be moved from the entity to the pads; reflect this in
the media pipeline function API.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
Documentation/media/kapi/mc-core.rst | 6 ++--
drivers/media/media-entity.c | 25 +++++++-------
drivers/media/pci/intel/ipu3/ipu3-cio2.c | 6 ++--
.../media/platform/exynos4-is/fimc-capture.c | 8 ++---
.../platform/exynos4-is/fimc-isp-video.c | 8 ++---
drivers/media/platform/exynos4-is/fimc-lite.c | 8 ++---
drivers/media/platform/omap3isp/ispvideo.c | 6 ++--
.../media/platform/qcom/camss/camss-video.c | 6 ++--
drivers/media/platform/rcar-vin/rcar-dma.c | 6 ++--
.../media/platform/s3c-camif/camif-capture.c | 6 ++--
drivers/media/platform/vimc/vimc-capture.c | 6 ++--
drivers/media/platform/vsp1/vsp1_video.c | 6 ++--
drivers/media/platform/xilinx/xilinx-dma.c | 6 ++--
drivers/media/usb/au0828/au0828-core.c | 4 +--
drivers/staging/media/imx/imx-media-utils.c | 6 ++--
drivers/staging/media/omap4iss/iss_video.c | 6 ++--
include/media/media-entity.h | 33 ++++++++++---------
17 files changed, 76 insertions(+), 76 deletions(-)
diff --git a/Documentation/media/kapi/mc-core.rst b/Documentation/media/kapi/mc-core.rst
index 849b87439b7a9772..ede7e946f6a82ac0 100644
--- a/Documentation/media/kapi/mc-core.rst
+++ b/Documentation/media/kapi/mc-core.rst
@@ -211,11 +211,11 @@ When starting streaming, drivers must notify all entities in the pipeline to
prevent link states from being modified during streaming by calling
:c:func:`media_pipeline_start()`.
-The function will mark all entities connected to the given entity through
-enabled links, either directly or indirectly, as streaming.
+The function will mark all entities connected to the given pad through
+enabled routes and links, either directly or indirectly, as streaming.
The struct :c:type:`media_pipeline` instance pointed to by
-the pipe argument will be stored in every entity in the pipeline.
+the pipe argument will be stored in every pad in the pipeline.
Drivers should embed the struct :c:type:`media_pipeline`
in higher-level pipeline structures and can then access the
pipeline through the struct :c:type:`media_entity`
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 239036a7582cbc95..2722c38a822d7787 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -411,12 +411,11 @@ EXPORT_SYMBOL_GPL(media_entity_get_fwnode_pad);
* Pipeline management
*/
-__must_check int __media_pipeline_start(struct media_entity *entity,
+__must_check int __media_pipeline_start(struct media_pad *pad,
struct media_pipeline *pipe)
{
- struct media_device *mdev = entity->graph_obj.mdev;
+ struct media_device *mdev = pad->graph_obj.mdev;
struct media_graph *graph = &pipe->graph;
- struct media_pad *pad = entity->pads;
struct media_pad *pad_err = pad;
struct media_link *link;
int ret = 0;
@@ -549,24 +548,23 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
}
EXPORT_SYMBOL_GPL(__media_pipeline_start);
-__must_check int media_pipeline_start(struct media_entity *entity,
+__must_check int media_pipeline_start(struct media_pad *pad,
struct media_pipeline *pipe)
{
- struct media_device *mdev = entity->graph_obj.mdev;
+ struct media_device *mdev = pad->graph_obj.mdev;
int ret;
mutex_lock(&mdev->graph_mutex);
- ret = __media_pipeline_start(entity, pipe);
+ ret = __media_pipeline_start(pad, pipe);
mutex_unlock(&mdev->graph_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(media_pipeline_start);
-void __media_pipeline_stop(struct media_entity *entity)
+void __media_pipeline_stop(struct media_pad *pad)
{
- struct media_pipeline *pipe = entity->pads->pipe;
+ struct media_pipeline *pipe = pad->pipe;
struct media_graph *graph = &pipe->graph;
- struct media_pad *pad;
/*
* If the following check fails, the driver has performed an
@@ -575,9 +573,10 @@ void __media_pipeline_stop(struct media_entity *entity)
if (WARN_ON(!pipe))
return;
- media_graph_walk_start(graph, entity->pads);
+ media_graph_walk_start(graph, pad);
while ((pad = media_graph_walk_next(graph))) {
+ struct media_entity *entity = pad->entity;
unsigned int i;
for (i = 0; i < entity->num_pads; i++) {
@@ -598,12 +597,12 @@ void __media_pipeline_stop(struct media_entity *entity)
}
EXPORT_SYMBOL_GPL(__media_pipeline_stop);
-void media_pipeline_stop(struct media_entity *entity)
+void media_pipeline_stop(struct media_pad *pad)
{
- struct media_device *mdev = entity->graph_obj.mdev;
+ struct media_device *mdev = pad->graph_obj.mdev;
mutex_lock(&mdev->graph_mutex);
- __media_pipeline_stop(entity);
+ __media_pipeline_stop(pad);
mutex_unlock(&mdev->graph_mutex);
}
EXPORT_SYMBOL_GPL(media_pipeline_stop);
diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
index 29027159eced88a5..7eb16e45c8069f4b 100644
--- a/drivers/media/pci/intel/ipu3/ipu3-cio2.c
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
@@ -1002,7 +1002,7 @@ static int cio2_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
return r;
}
- r = media_pipeline_start(&q->vdev.entity, &q->pipe);
+ r = media_pipeline_start(q->vdev.entity.pads, &q->pipe);
if (r)
goto fail_pipeline;
@@ -1022,7 +1022,7 @@ static int cio2_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
fail_csi2_subdev:
cio2_hw_exit(cio2, q);
fail_hw:
- media_pipeline_stop(&q->vdev.entity);
+ media_pipeline_stop(q->vdev.entity.pads);
fail_pipeline:
dev_dbg(&cio2->pci_dev->dev, "failed to start streaming (%d)\n", r);
cio2_vb2_return_all_buffers(q, VB2_BUF_STATE_QUEUED);
@@ -1043,7 +1043,7 @@ static void cio2_vb2_stop_streaming(struct vb2_queue *vq)
cio2_hw_exit(cio2, q);
synchronize_irq(cio2->pci_dev->irq);
cio2_vb2_return_all_buffers(q, VB2_BUF_STATE_ERROR);
- media_pipeline_stop(&q->vdev.entity);
+ media_pipeline_stop(q->vdev.entity.pads);
pm_runtime_put(&cio2->pci_dev->dev);
cio2->streaming = false;
}
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index a3cdac18819043df..88efbfbe8f61c0dc 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -537,7 +537,7 @@ static int fimc_capture_release(struct file *file)
mutex_lock(&fimc->lock);
if (close && vc->streaming) {
- media_pipeline_stop(&vc->ve.vdev.entity);
+ media_pipeline_stop(vc->ve.vdev.entity.pads);
vc->streaming = false;
}
@@ -1201,7 +1201,7 @@ static int fimc_cap_streamon(struct file *file, void *priv,
if (fimc_capture_active(fimc))
return -EBUSY;
- ret = media_pipeline_start(entity, &vc->ve.pipe->mp);
+ ret = media_pipeline_start(entity->pads, &vc->ve.pipe->mp);
if (ret < 0)
return ret;
@@ -1235,7 +1235,7 @@ static int fimc_cap_streamon(struct file *file, void *priv,
}
err_p_stop:
- media_pipeline_stop(entity);
+ media_pipeline_stop(entity->pads);
return ret;
}
@@ -1250,7 +1250,7 @@ static int fimc_cap_streamoff(struct file *file, void *priv,
if (ret < 0)
return ret;
- media_pipeline_stop(&vc->ve.vdev.entity);
+ media_pipeline_stop(vc->ve.vdev.entity.pads);
vc->streaming = false;
return 0;
}
diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c
index a920164f53f1f0ab..d0a40ab0b7e92362 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp-video.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c
@@ -312,7 +312,7 @@ static int isp_video_release(struct file *file)
mutex_lock(&isp->video_lock);
if (v4l2_fh_is_singular_file(file) && ivc->streaming) {
- media_pipeline_stop(entity);
+ media_pipeline_stop(entity->pads);
ivc->streaming = 0;
}
@@ -494,7 +494,7 @@ static int isp_video_streamon(struct file *file, void *priv,
struct media_entity *me = &ve->vdev.entity;
int ret;
- ret = media_pipeline_start(me, &ve->pipe->mp);
+ ret = media_pipeline_start(me->pads, &ve->pipe->mp);
if (ret < 0)
return ret;
@@ -509,7 +509,7 @@ static int isp_video_streamon(struct file *file, void *priv,
isp->video_capture.streaming = 1;
return 0;
p_stop:
- media_pipeline_stop(me);
+ media_pipeline_stop(me->pads);
return ret;
}
@@ -524,7 +524,7 @@ static int isp_video_streamoff(struct file *file, void *priv,
if (ret < 0)
return ret;
- media_pipeline_stop(&video->ve.vdev.entity);
+ media_pipeline_stop(video->ve.vdev.entity.pads);
video->streaming = 0;
return 0;
}
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index f486eeed805b0bbc..e99a8c1a68541077 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -524,7 +524,7 @@ static int fimc_lite_release(struct file *file)
if (v4l2_fh_is_singular_file(file) &&
atomic_read(&fimc->out_path) == FIMC_IO_DMA) {
if (fimc->streaming) {
- media_pipeline_stop(entity);
+ media_pipeline_stop(entity->pads);
fimc->streaming = false;
}
fimc_lite_stop_capture(fimc, false);
@@ -832,7 +832,7 @@ static int fimc_lite_streamon(struct file *file, void *priv,
if (fimc_lite_active(fimc))
return -EBUSY;
- ret = media_pipeline_start(entity, &fimc->ve.pipe->mp);
+ ret = media_pipeline_start(entity->pads, &fimc->ve.pipe->mp);
if (ret < 0)
return ret;
@@ -849,7 +849,7 @@ static int fimc_lite_streamon(struct file *file, void *priv,
}
err_p_stop:
- media_pipeline_stop(entity);
+ media_pipeline_stop(entity->pads);
return 0;
}
@@ -863,7 +863,7 @@ static int fimc_lite_streamoff(struct file *file, void *priv,
if (ret < 0)
return ret;
- media_pipeline_stop(&fimc->ve.vdev.entity);
+ media_pipeline_stop(fimc->ve.vdev.entity.pads);
fimc->streaming = false;
return 0;
}
diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c
index 5ac7ac8c98d52ac8..a9613c31a6b87e3c 100644
--- a/drivers/media/platform/omap3isp/ispvideo.c
+++ b/drivers/media/platform/omap3isp/ispvideo.c
@@ -1113,7 +1113,7 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
pipe->max_rate = pipe->l3_ick;
- ret = media_pipeline_start(&video->video.entity, &pipe->pipe);
+ ret = media_pipeline_start(video->video.entity.pads, &pipe->pipe);
if (ret < 0)
goto err_pipeline_start;
@@ -1170,7 +1170,7 @@ isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
return 0;
err_check_format:
- media_pipeline_stop(&video->video.entity);
+ media_pipeline_stop(video->video.entity.pads);
err_pipeline_start:
/* TODO: Implement PM QoS */
/* The DMA queue must be emptied here, otherwise CCDC interrupts that
@@ -1237,7 +1237,7 @@ isp_video_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
video->error = false;
/* TODO: Implement PM QoS */
- media_pipeline_stop(&video->video.entity);
+ media_pipeline_stop(video->video.entity.pads);
media_entity_enum_cleanup(&pipe->ent_enum);
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index c9bb0d023db480d1..8e828755c391ba48 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -436,7 +436,7 @@ static int video_start_streaming(struct vb2_queue *q, unsigned int count)
struct v4l2_subdev *subdev;
int ret;
- ret = media_pipeline_start(&vdev->entity, &video->pipe);
+ ret = media_pipeline_start(vdev->entity.pads, &video->pipe);
if (ret < 0)
return ret;
@@ -465,7 +465,7 @@ static int video_start_streaming(struct vb2_queue *q, unsigned int count)
return 0;
error:
- media_pipeline_stop(&vdev->entity);
+ media_pipeline_stop(vdev->entity.pads);
video->ops->flush_buffers(video, VB2_BUF_STATE_QUEUED);
@@ -496,7 +496,7 @@ static void video_stop_streaming(struct vb2_queue *q)
v4l2_subdev_call(subdev, video, s_stream, 0);
}
- media_pipeline_stop(&vdev->entity);
+ media_pipeline_stop(vdev->entity.pads);
video->ops->flush_buffers(video, VB2_BUF_STATE_ERROR);
}
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index e749096926f34d4a..57c2087f7ad472f3 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -1112,7 +1112,7 @@ static int rvin_set_stream(struct rvin_dev *vin, int on)
sd = media_entity_to_v4l2_subdev(pad->entity);
if (!on) {
- media_pipeline_stop(&vin->vdev.entity);
+ media_pipeline_stop(vin->vdev.entity.pads);
return v4l2_subdev_call(sd, video, s_stream, 0);
}
@@ -1129,7 +1129,7 @@ static int rvin_set_stream(struct rvin_dev *vin, int on)
mdev = vin->vdev.entity.graph_obj.mdev;
mutex_lock(&mdev->graph_mutex);
pipe = sd->entity.pads->pipe ? sd->entity.pads->pipe : &vin->vdev.pipe;
- ret = __media_pipeline_start(&vin->vdev.entity, pipe);
+ ret = __media_pipeline_start(vin->vdev.entity.pads, pipe);
mutex_unlock(&mdev->graph_mutex);
if (ret)
return ret;
@@ -1138,7 +1138,7 @@ static int rvin_set_stream(struct rvin_dev *vin, int on)
if (ret == -ENOIOCTLCMD)
ret = 0;
if (ret)
- media_pipeline_stop(&vin->vdev.entity);
+ media_pipeline_stop(vin->vdev.entity.pads);
return ret;
}
diff --git a/drivers/media/platform/s3c-camif/camif-capture.c b/drivers/media/platform/s3c-camif/camif-capture.c
index c02dce8b4c6c788b..3d7b92f0da33a5f9 100644
--- a/drivers/media/platform/s3c-camif/camif-capture.c
+++ b/drivers/media/platform/s3c-camif/camif-capture.c
@@ -858,13 +858,13 @@ static int s3c_camif_streamon(struct file *file, void *priv,
if (s3c_vp_active(vp))
return 0;
- ret = media_pipeline_start(sensor, camif->m_pipeline);
+ ret = media_pipeline_start(sensor->pads, camif->m_pipeline);
if (ret < 0)
return ret;
ret = camif_pipeline_validate(camif);
if (ret < 0) {
- media_pipeline_stop(sensor);
+ media_pipeline_stop(sensor->pads);
return ret;
}
@@ -888,7 +888,7 @@ static int s3c_camif_streamoff(struct file *file, void *priv,
ret = vb2_streamoff(&vp->vb_queue, type);
if (ret == 0)
- media_pipeline_stop(&camif->sensor.sd->entity);
+ media_pipeline_stop(camif->sensor.sd->entity.pads);
return ret;
}
diff --git a/drivers/media/platform/vimc/vimc-capture.c b/drivers/media/platform/vimc/vimc-capture.c
index 88a1e5670c725101..de3fee15f0a73493 100644
--- a/drivers/media/platform/vimc/vimc-capture.c
+++ b/drivers/media/platform/vimc/vimc-capture.c
@@ -247,7 +247,7 @@ static int vimc_cap_start_streaming(struct vb2_queue *vq, unsigned int count)
vcap->sequence = 0;
/* Start the media pipeline */
- ret = media_pipeline_start(entity, &vcap->pipe);
+ ret = media_pipeline_start(entity->pads, &vcap->pipe);
if (ret) {
vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_QUEUED);
return ret;
@@ -256,7 +256,7 @@ static int vimc_cap_start_streaming(struct vb2_queue *vq, unsigned int count)
/* Enable streaming from the pipe */
ret = vimc_pipeline_s_stream(&vcap->vdev.entity, 1);
if (ret) {
- media_pipeline_stop(entity);
+ media_pipeline_stop(entity->pads);
vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_QUEUED);
return ret;
}
@@ -276,7 +276,7 @@ static void vimc_cap_stop_streaming(struct vb2_queue *vq)
vimc_pipeline_s_stream(&vcap->vdev.entity, 0);
/* Stop the media pipeline */
- media_pipeline_stop(&vcap->vdev.entity);
+ media_pipeline_stop(vcap->vdev.entity.pads);
/* Release all active buffers */
vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_ERROR);
diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c
index f3e7f239e90c5f7d..241d2efbced27359 100644
--- a/drivers/media/platform/vsp1/vsp1_video.c
+++ b/drivers/media/platform/vsp1/vsp1_video.c
@@ -940,7 +940,7 @@ static void vsp1_video_stop_streaming(struct vb2_queue *vq)
}
mutex_unlock(&pipe->lock);
- media_pipeline_stop(&video->video.entity);
+ media_pipeline_stop(video->video.entity.pads);
vsp1_video_release_buffers(video);
vsp1_video_pipeline_put(pipe);
}
@@ -1067,7 +1067,7 @@ vsp1_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
return PTR_ERR(pipe);
}
- ret = __media_pipeline_start(&video->video.entity, &pipe->pipe);
+ ret = __media_pipeline_start(video->video.entity.pads, &pipe->pipe);
if (ret < 0) {
mutex_unlock(&mdev->graph_mutex);
goto err_pipe;
@@ -1091,7 +1091,7 @@ vsp1_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
return 0;
err_stop:
- media_pipeline_stop(&video->video.entity);
+ media_pipeline_stop(video->video.entity.pads);
err_pipe:
vsp1_video_pipeline_put(pipe);
return ret;
diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c
index 9ea9a58eec632b7b..0fc948fe1a1aa0d8 100644
--- a/drivers/media/platform/xilinx/xilinx-dma.c
+++ b/drivers/media/platform/xilinx/xilinx-dma.c
@@ -409,7 +409,7 @@ static int xvip_dma_start_streaming(struct vb2_queue *vq, unsigned int count)
pipe = dma->video.entity.pads->pipe
? to_xvip_pipeline(&dma->video.entity) : &dma->pipe;
- ret = media_pipeline_start(&dma->video.entity, &pipe->pipe);
+ ret = media_pipeline_start(dma->video.entity.pads, &pipe->pipe);
if (ret < 0)
goto error;
@@ -435,7 +435,7 @@ static int xvip_dma_start_streaming(struct vb2_queue *vq, unsigned int count)
return 0;
error_stop:
- media_pipeline_stop(&dma->video.entity);
+ media_pipeline_stop(dma->video.entity.pads);
error:
/* Give back all queued buffers to videobuf2. */
@@ -463,7 +463,7 @@ static void xvip_dma_stop_streaming(struct vb2_queue *vq)
/* Cleanup the pipeline and mark it as being stopped. */
xvip_pipeline_cleanup(pipe);
- media_pipeline_stop(&dma->video.entity);
+ media_pipeline_stop(dma->video.entity.pads);
/* Give back all queued buffers to videobuf2. */
spin_lock_irq(&dma->queued_lock);
diff --git a/drivers/media/usb/au0828/au0828-core.c b/drivers/media/usb/au0828/au0828-core.c
index cd363a2100d453c6..b649f11a45b586f2 100644
--- a/drivers/media/usb/au0828/au0828-core.c
+++ b/drivers/media/usb/au0828/au0828-core.c
@@ -394,7 +394,7 @@ static int au0828_enable_source(struct media_entity *entity,
goto end;
}
- ret = __media_pipeline_start(entity, pipe);
+ ret = __media_pipeline_start(entity->pads, pipe);
if (ret) {
pr_err("Start Pipeline: %s->%s Error %d\n",
source->name, entity->name, ret);
@@ -445,7 +445,7 @@ static void au0828_disable_source(struct media_entity *entity)
*/
if (dev->active_link_owner != entity)
return;
- __media_pipeline_stop(entity);
+ __media_pipeline_stop(entity->pads);
ret = __media_entity_setup_link(dev->active_link, 0);
if (ret)
pr_err("Deactivate link Error %d\n", ret);
diff --git a/drivers/staging/media/imx/imx-media-utils.c b/drivers/staging/media/imx/imx-media-utils.c
index 1cfa77a96e610f6c..b89e3f369d1b3686 100644
--- a/drivers/staging/media/imx/imx-media-utils.c
+++ b/drivers/staging/media/imx/imx-media-utils.c
@@ -909,16 +909,16 @@ int imx_media_pipeline_set_stream(struct imx_media_dev *imxmd,
mutex_lock(&imxmd->md.graph_mutex);
if (on) {
- ret = __media_pipeline_start(entity, &imxmd->pipe);
+ ret = __media_pipeline_start(entity->pads, &imxmd->pipe);
if (ret)
goto out;
ret = v4l2_subdev_call(sd, video, s_stream, 1);
if (ret)
- __media_pipeline_stop(entity);
+ __media_pipeline_stop(entity->pads);
} else {
v4l2_subdev_call(sd, video, s_stream, 0);
if (entity->pads->pipe)
- __media_pipeline_stop(entity);
+ __media_pipeline_stop(entity->pads);
}
out:
diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c
index d1d91a79992a61bc..6ff6b75de4db80a1 100644
--- a/drivers/staging/media/omap4iss/iss_video.c
+++ b/drivers/staging/media/omap4iss/iss_video.c
@@ -898,7 +898,7 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
if (video->iss->pdata->set_constraints)
video->iss->pdata->set_constraints(video->iss, true);
- ret = media_pipeline_start(pad->entity, &pipe->pipe);
+ ret = media_pipeline_start(pad, &pipe->pipe);
if (ret < 0)
goto err_media_pipeline_start;
@@ -987,7 +987,7 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
err_omap4iss_set_stream:
vb2_streamoff(&vfh->queue, type);
err_iss_video_check_format:
- media_pipeline_stop(&video->video.entity);
+ media_pipeline_stop(video->video.entity.pads);
err_media_pipeline_start:
if (video->iss->pdata->set_constraints)
video->iss->pdata->set_constraints(video->iss, false);
@@ -1041,7 +1041,7 @@ iss_video_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
if (video->iss->pdata->set_constraints)
video->iss->pdata->set_constraints(video->iss, false);
- media_pipeline_stop(&video->video.entity);
+ media_pipeline_stop(video->video.entity.pads);
done:
mutex_unlock(&video->stream_lock);
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 4f68638153679a36..532c438b9eb862c5 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -917,53 +917,54 @@ struct media_pad *media_graph_walk_next(struct media_graph *graph);
/**
* media_pipeline_start - Mark a pipeline as streaming
- * @entity: Starting entity
- * @pipe: Media pipeline to be assigned to all entities in the pipeline.
+ * @pad: Starting pad
+ * @pipe: Media pipeline to be assigned to all pads in the pipeline.
*
- * Mark all entities connected to a given entity through enabled links, either
- * directly or indirectly, as streaming. The given pipeline object is assigned
- * to every entity in the pipeline and stored in the media_entity pipe field.
+ * Mark all pads connected to a given pad through enabled
+ * routes or links, either directly or indirectly, as streaming. The
+ * given pipeline object is assigned to every pad in the pipeline
+ * and stored in the media_pad pipe field.
*
* Calls to this function can be nested, in which case the same number of
* media_pipeline_stop() calls will be required to stop streaming. The
* pipeline pointer must be identical for all nested calls to
* media_pipeline_start().
*/
-__must_check int media_pipeline_start(struct media_entity *entity,
+__must_check int media_pipeline_start(struct media_pad *pad,
struct media_pipeline *pipe);
/**
* __media_pipeline_start - Mark a pipeline as streaming
*
- * @entity: Starting entity
- * @pipe: Media pipeline to be assigned to all entities in the pipeline.
+ * @pad: Starting pad
+ * @pipe: Media pipeline to be assigned to all pads in the pipeline.
*
* ..note:: This is the non-locking version of media_pipeline_start()
*/
-__must_check int __media_pipeline_start(struct media_entity *entity,
+__must_check int __media_pipeline_start(struct media_pad *pad,
struct media_pipeline *pipe);
/**
* media_pipeline_stop - Mark a pipeline as not streaming
- * @entity: Starting entity
+ * @pad: Starting pad
*
- * Mark all entities connected to a given entity through enabled links, either
- * directly or indirectly, as not streaming. The media_entity pipe field is
- * reset to %NULL.
+ * Mark all pads connected to a given pad through enabled routes or
+ * links, either directly or indirectly, as not streaming. The
+ * media_pad pipe field is reset to %NULL.
*
* If multiple calls to media_pipeline_start() have been made, the same
* number of calls to this function are required to mark the pipeline as not
* streaming.
*/
-void media_pipeline_stop(struct media_entity *entity);
+void media_pipeline_stop(struct media_pad *pad);
/**
* __media_pipeline_stop - Mark a pipeline as not streaming
*
- * @entity: Starting entity
+ * @pad: Starting pad
*
* .. note:: This is the non-locking version of media_pipeline_stop()
*/
-void __media_pipeline_stop(struct media_entity *entity);
+void __media_pipeline_stop(struct media_pad *pad);
/**
* media_devnode_create() - creates and initializes a device node interface
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 07/30] media: entity: Add has_route entity operation
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (5 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 06/30] media: entity: Use pad as the starting point for a pipeline Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-09-27 12:58 ` jacopo mondi
2018-08-23 13:25 ` [PATCH 08/30] media: entity: Add media_has_route() function Niklas Söderlund
` (23 subsequent siblings)
30 siblings, 1 reply; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Michal Simek
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The optional operation can be used by entities to report whether two
pads are internally connected.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
include/media/media-entity.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 532c438b9eb862c5..07df1b8d85a3c1ba 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -193,6 +193,9 @@ struct media_pad {
* @link_validate: Return whether a link is valid from the entity point of
* view. The media_pipeline_start() function
* validates all links by calling this operation. Optional.
+ * @has_route: Return whether a route exists inside the entity between
+ * two given pads. Optional. If the operation isn't
+ * implemented all pads will be considered as connected.
*
* .. note::
*
@@ -205,6 +208,8 @@ struct media_entity_operations {
const struct media_pad *local,
const struct media_pad *remote, u32 flags);
int (*link_validate)(struct media_link *link);
+ bool (*has_route)(struct media_entity *entity, unsigned int pad0,
+ unsigned int pad1);
};
/**
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH 07/30] media: entity: Add has_route entity operation
2018-08-23 13:25 ` [PATCH 07/30] media: entity: Add has_route entity operation Niklas Söderlund
@ 2018-09-27 12:58 ` jacopo mondi
0 siblings, 0 replies; 47+ messages in thread
From: jacopo mondi @ 2018-09-27 12:58 UTC (permalink / raw)
To: Niklas Söderlund
Cc: Laurent Pinchart, Sakari Ailus, linux-media, linux-renesas-soc,
Michal Simek
[-- Attachment #1: Type: text/plain, Size: 1929 bytes --]
Hello,
thank you all for the patches!
On Thu, Aug 23, 2018 at 03:25:21PM +0200, Niklas Söderlund wrote:
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> The optional operation can be used by entities to report whether two
> pads are internally connected.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
> include/media/media-entity.h | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/include/media/media-entity.h b/include/media/media-entity.h
> index 532c438b9eb862c5..07df1b8d85a3c1ba 100644
> --- a/include/media/media-entity.h
> +++ b/include/media/media-entity.h
> @@ -193,6 +193,9 @@ struct media_pad {
> * @link_validate: Return whether a link is valid from the entity point of
> * view. The media_pipeline_start() function
> * validates all links by calling this operation. Optional.
> + * @has_route: Return whether a route exists inside the entity between
> + * two given pads. Optional. If the operation isn't
> + * implemented all pads will be considered as connected.
> *
> * .. note::
> *
> @@ -205,6 +208,8 @@ struct media_entity_operations {
> const struct media_pad *local,
> const struct media_pad *remote, u32 flags);
> int (*link_validate)(struct media_link *link);
> + bool (*has_route)(struct media_entity *entity, unsigned int pad0,
> + unsigned int pad1);
In one next patch in the series:
[PATCH 09/30] media: entity: Swap pads if route is checked from source to sink
the media_entity_has_route() operations ensures the sink pad is always
the first one. Could we make it explicit in the paramters name and
documentation to ease understanding when driver will have to implement this?
Thanks
j
> };
>
> /**
> --
> 2.18.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH 08/30] media: entity: Add media_has_route() function
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (6 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 07/30] media: entity: Add has_route entity operation Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 09/30] media: entity: Swap pads if route is checked from source to sink Niklas Söderlund
` (22 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Michal Simek
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This is a wrapper around the media entity has_route operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/media-entity.c | 16 ++++++++++++++++
include/media/media-entity.h | 17 +++++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 2722c38a822d7787..2e5958732a9735cf 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -237,6 +237,22 @@ EXPORT_SYMBOL_GPL(media_entity_pads_init);
* Graph traversal
*/
+bool media_entity_has_route(struct media_entity *entity, unsigned int pad0,
+ unsigned int pad1)
+{
+ if (pad0 >= entity->num_pads || pad1 >= entity->num_pads)
+ return false;
+
+ if (pad0 == pad1)
+ return true;
+
+ if (!entity->ops || !entity->ops->has_route)
+ return true;
+
+ return entity->ops->has_route(entity, pad0, pad1);
+}
+EXPORT_SYMBOL_GPL(media_entity_has_route);
+
static struct media_pad *
media_entity_other(struct media_pad *pad, struct media_link *link)
{
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 07df1b8d85a3c1ba..53f293415fc39ab1 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -871,6 +871,23 @@ int media_entity_get_fwnode_pad(struct media_entity *entity,
__must_check int media_graph_walk_init(
struct media_graph *graph, struct media_device *mdev);
+/**
+ * media_entity_has_route - Check if two entity pads are connected internally
+ *
+ * @entity: The entity
+ * @pad0: The first pad index
+ * @pad1: The second pad index
+ *
+ * This function can be used to check whether two pads of an entity are
+ * connected internally in the entity.
+ *
+ * The caller must hold entity->graph_obj.mdev->mutex.
+ *
+ * Return: true if the pads are connected internally and false otherwise.
+ */
+bool media_entity_has_route(struct media_entity *entity, unsigned int pad0,
+ unsigned int pad1);
+
/**
* media_graph_walk_cleanup - Release resources used by graph walk.
*
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 09/30] media: entity: Swap pads if route is checked from source to sink
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (7 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 08/30] media: entity: Add media_has_route() function Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 10/30] media: entity: Use routing information during graph traversal Niklas Söderlund
` (21 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
This way the pads are always passed to the has_route() op sink pad first.
Makes sense.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/media-entity.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 2e5958732a9735cf..88c8b838b78b39aa 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -249,6 +249,10 @@ bool media_entity_has_route(struct media_entity *entity, unsigned int pad0,
if (!entity->ops || !entity->ops->has_route)
return true;
+ if (entity->pads[pad0].flags & MEDIA_PAD_FL_SOURCE
+ && entity->pads[pad1].flags & MEDIA_PAD_FL_SINK)
+ swap(pad0, pad1);
+
return entity->ops->has_route(entity, pad0, pad1);
}
EXPORT_SYMBOL_GPL(media_entity_has_route);
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 10/30] media: entity: Use routing information during graph traversal
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (8 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 09/30] media: entity: Swap pads if route is checked from source to sink Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 11/30] media: entity: Skip link validation for pads to which there is no route to Niklas Söderlund
` (20 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Michal Simek
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Take internal routing information as reported by the entity has_route
operation into account during graph traversal to avoid following
unrelated links.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/media-entity.c | 44 ++++++++++++++++++++++--------------
1 file changed, 27 insertions(+), 17 deletions(-)
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 88c8b838b78b39aa..12d9fc9ee02f38f2 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -257,15 +257,6 @@ bool media_entity_has_route(struct media_entity *entity, unsigned int pad0,
}
EXPORT_SYMBOL_GPL(media_entity_has_route);
-static struct media_pad *
-media_entity_other(struct media_pad *pad, struct media_link *link)
-{
- if (link->source == pad)
- return link->sink;
- else
- return link->source;
-}
-
/* push an entity to traversal stack */
static void stack_push(struct media_graph *graph, struct media_pad *pad)
{
@@ -336,7 +327,8 @@ static void media_graph_walk_iter(struct media_graph *graph)
{
struct media_pad *pad = stack_top(graph);
struct media_link *link;
- struct media_pad *next;
+ struct media_pad *remote;
+ struct media_pad *local;
link = list_entry(link_top(graph), typeof(*link), list);
@@ -350,23 +342,41 @@ static void media_graph_walk_iter(struct media_graph *graph)
return;
}
- /* Get the entity in the other end of the link . */
- next = media_entity_other(pad, link);
+ /*
+ * Get the local pad, the remote pad and the entity at the other
+ * end of the link.
+ */
+ if (link->source->entity == pad->entity) {
+ remote = link->sink;
+ local = link->source;
+ } else {
+ remote = link->source;
+ local = link->sink;
+ }
+
+ /*
+ * Are the local pad and the pad we came from connected
+ * internally in the entity ?
+ */
+ if (!media_entity_has_route(pad->entity, pad->index, local->index)) {
+ link_top(graph) = link_top(graph)->next;
+ return;
+ }
/* Has the entity already been visited? */
- if (media_entity_enum_test_and_set(&graph->ent_enum, next->entity)) {
+ if (media_entity_enum_test_and_set(&graph->ent_enum, remote->entity)) {
link_top(graph) = link_top(graph)->next;
dev_dbg(pad->graph_obj.mdev->dev,
"walk: skipping entity '%s' (already seen)\n",
- next->entity->name);
+ remote->entity->name);
return;
}
/* Push the new entity to stack and start over. */
link_top(graph) = link_top(graph)->next;
- stack_push(graph, next);
- dev_dbg(next->graph_obj.mdev->dev, "walk: pushing '%s':%u on stack\n",
- next->entity->name, next->index);
+ stack_push(graph, remote);
+ dev_dbg(remote->graph_obj.mdev->dev, "walk: pushing '%s':%u on stack\n",
+ remote->entity->name, remote->index);
}
struct media_pad *media_graph_walk_next(struct media_graph *graph)
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 11/30] media: entity: Skip link validation for pads to which there is no route to
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (9 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 10/30] media: entity: Use routing information during graph traversal Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 12/30] media: entity: Add an iterator helper for connected pads Niklas Söderlund
` (19 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
Links are validated along the pipeline which is about to start streaming.
Not all the pads in entities that are traversed along that pipeline are
part of the pipeline, however. Skip the link validation for such pads.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/media-entity.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 12d9fc9ee02f38f2..0395d58b2e233d88 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -493,6 +493,11 @@ __must_check int __media_pipeline_start(struct media_pad *pad,
struct media_pad *other_pad = link->sink->entity == entity
? link->sink : link->source;
+ /* Ignore pads to which there is no route. */
+ if (!media_entity_has_route(entity, pad->index,
+ other_pad->index))
+ continue;
+
/* Mark that a pad is connected by a link. */
bitmap_clear(has_no_links, other_pad->index, 1);
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 12/30] media: entity: Add an iterator helper for connected pads
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (10 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 11/30] media: entity: Skip link validation for pads to which there is no route to Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 13/30] media: entity: Add only connected pads to the pipeline Niklas Söderlund
` (18 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a helper macro for iterating over pads that are connected through
enabled routes. This can be used to find all the connected pads within an
entity, for instance starting from the pad which has been obtained during
the graph walk.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
include/media/media-entity.h | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 53f293415fc39ab1..169cf47982a0b1fa 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -888,6 +888,33 @@ __must_check int media_graph_walk_init(
bool media_entity_has_route(struct media_entity *entity, unsigned int pad0,
unsigned int pad1);
+static inline struct media_pad *__media_entity_for_routed_pads_next(
+ struct media_pad *start, struct media_pad *iter)
+{
+ struct media_entity *entity = start->entity;
+
+ while (iter < &entity->pads[entity->num_pads] &&
+ !media_entity_has_route(entity, start->index, iter->index))
+ iter++;
+
+ return iter;
+}
+
+/**
+ * media_entity_for_routed_pads - Iterate over entity pads connected by routes
+ *
+ * @start: The stating pad
+ * @iter: The iterator pad
+ *
+ * Iterate over all pads connected through routes from a given pad
+ * within an entity. The iteration will include the starting pad itself.
+ */
+#define media_entity_for_routed_pads(start, iter) \
+ for (iter = __media_entity_for_routed_pads_next( \
+ start, (start)->entity->pads); \
+ iter < &(start)->entity->pads[(start)->entity->num_pads]; \
+ iter = __media_entity_for_routed_pads_next(start, iter + 1))
+
/**
* media_graph_walk_cleanup - Release resources used by graph walk.
*
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 13/30] media: entity: Add only connected pads to the pipeline
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (11 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 12/30] media: entity: Add an iterator helper for connected pads Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 14/30] media: entity: Add debug information in graph walk route check Niklas Söderlund
` (17 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
A single entity may contain multiple pipelines. Only add pads that were
connected to the pad through which the entity was reached to the pipeline.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/media-entity.c | 20 ++++++--------------
1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 0395d58b2e233d88..c11cf684b336f87e 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -460,15 +460,13 @@ __must_check int __media_pipeline_start(struct media_pad *pad,
while ((pad = media_graph_walk_next(graph))) {
struct media_entity *entity = pad->entity;
- unsigned int i;
+ struct media_pad *iter;
bool skip_validation = pad->pipe;
DECLARE_BITMAP(active, MEDIA_ENTITY_MAX_PADS);
DECLARE_BITMAP(has_no_links, MEDIA_ENTITY_MAX_PADS);
- for (i = 0; i < entity->num_pads; i++) {
- struct media_pad *iter = &entity->pads[i];
-
+ media_entity_for_routed_pads(pad, iter) {
if (iter->pipe && WARN_ON(iter->pipe != pipe))
ret = -EBUSY;
else
@@ -553,12 +551,9 @@ __must_check int __media_pipeline_start(struct media_pad *pad,
media_graph_walk_start(graph, pad_err);
while ((pad_err = media_graph_walk_next(graph))) {
- struct media_entity *entity_err = pad_err->entity;
- unsigned int i;
-
- for (i = 0; i < entity_err->num_pads; i++) {
- struct media_pad *iter = &entity_err->pads[i];
+ struct media_pad *iter;
+ media_entity_for_routed_pads(pad_err, iter) {
/* Sanity check for negative stream_count */
if (!WARN_ON_ONCE(iter->stream_count <= 0)) {
--iter->stream_count;
@@ -611,12 +606,9 @@ void __media_pipeline_stop(struct media_pad *pad)
media_graph_walk_start(graph, pad);
while ((pad = media_graph_walk_next(graph))) {
- struct media_entity *entity = pad->entity;
- unsigned int i;
-
- for (i = 0; i < entity->num_pads; i++) {
- struct media_pad *iter = &entity->pads[i];
+ struct media_pad *iter;
+ media_entity_for_routed_pads(pad, iter) {
/* Sanity check for negative stream_count */
if (!WARN_ON_ONCE(iter->stream_count <= 0)) {
iter->stream_count--;
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 14/30] media: entity: Add debug information in graph walk route check
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (12 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 13/30] media: entity: Add only connected pads to the pipeline Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 15/30] media: entity: Look for indirect routes Niklas Söderlund
` (16 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/media-entity.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index c11cf684b336f87e..3912bc75651fe0b7 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -360,6 +360,9 @@ static void media_graph_walk_iter(struct media_graph *graph)
*/
if (!media_entity_has_route(pad->entity, pad->index, local->index)) {
link_top(graph) = link_top(graph)->next;
+ dev_dbg(pad->graph_obj.mdev->dev,
+ "walk: skipping \"%s\":%u -> %u (no route)\n",
+ pad->entity->name, pad->index, local->index);
return;
}
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 15/30] media: entity: Look for indirect routes
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (13 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 14/30] media: entity: Add debug information in graph walk route check Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-09-28 16:58 ` jacopo mondi
2018-08-23 13:25 ` [PATCH 16/30] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations Niklas Söderlund
` (15 subsequent siblings)
30 siblings, 1 reply; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
Two pads are considered having an active route for the purpose of
has_route() if an indirect active route can be found between the two pads.
An simple example of this is that a source pad has an active route to
another source pad if both of the pads have an active route to the same
sink pad.
Make media_entity_has_route() return true in that case, and do not rely on
drivers performing this by themselves.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/media-entity.c | 32 +++++++++++++++++++++++++++++++-
1 file changed, 31 insertions(+), 1 deletion(-)
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 3912bc75651fe0b7..29e732a130667ae9 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -240,6 +240,9 @@ EXPORT_SYMBOL_GPL(media_entity_pads_init);
bool media_entity_has_route(struct media_entity *entity, unsigned int pad0,
unsigned int pad1)
{
+ unsigned int i;
+ bool has_route;
+
if (pad0 >= entity->num_pads || pad1 >= entity->num_pads)
return false;
@@ -253,7 +256,34 @@ bool media_entity_has_route(struct media_entity *entity, unsigned int pad0,
&& entity->pads[pad1].flags & MEDIA_PAD_FL_SINK)
swap(pad0, pad1);
- return entity->ops->has_route(entity, pad0, pad1);
+ has_route = entity->ops->has_route(entity, pad0, pad1);
+ /* A direct route is returned immediately */
+ if (has_route ||
+ (entity->pads[pad0].flags & MEDIA_PAD_FL_SINK &&
+ entity->pads[pad1].flags & MEDIA_PAD_FL_SOURCE))
+ return true;
+
+ /* Look for indirect routes */
+ for (i = 0; i < entity->num_pads; i++) {
+ if (i == pad0 || i == pad1)
+ continue;
+
+ /*
+ * There are no direct routes between same types of
+ * pads, so skip checking this route
+ */
+ if (!((entity->pads[pad0].flags ^ entity->pads[i].flags) &
+ (MEDIA_PAD_FL_SOURCE | MEDIA_PAD_FL_SINK)))
+ continue;
+
+ /* Is there an indirect route? */
+ if (entity->ops->has_route(entity, i, pad0) &&
+ entity->ops->has_route(entity, i, pad1))
+ return true;
+ }
+
+ return false;
+
}
EXPORT_SYMBOL_GPL(media_entity_has_route);
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH 15/30] media: entity: Look for indirect routes
2018-08-23 13:25 ` [PATCH 15/30] media: entity: Look for indirect routes Niklas Söderlund
@ 2018-09-28 16:58 ` jacopo mondi
0 siblings, 0 replies; 47+ messages in thread
From: jacopo mondi @ 2018-09-28 16:58 UTC (permalink / raw)
To: Niklas Söderlund
Cc: Laurent Pinchart, Sakari Ailus, linux-media, linux-renesas-soc
[-- Attachment #1: Type: text/plain, Size: 3521 bytes --]
Hi Sakari,
On Thu, Aug 23, 2018 at 03:25:29PM +0200, Niklas Söderlund wrote:
> From: Sakari Ailus <sakari.ailus@linux.intel.com>
>
> Two pads are considered having an active route for the purpose of
> has_route() if an indirect active route can be found between the two pads.
> An simple example of this is that a source pad has an active route to
> another source pad if both of the pads have an active route to the same
> sink pad.
>
> Make media_entity_has_route() return true in that case, and do not rely on
> drivers performing this by themselves.
>
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
> drivers/media/media-entity.c | 32 +++++++++++++++++++++++++++++++-
> 1 file changed, 31 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
> index 3912bc75651fe0b7..29e732a130667ae9 100644
> --- a/drivers/media/media-entity.c
> +++ b/drivers/media/media-entity.c
> @@ -240,6 +240,9 @@ EXPORT_SYMBOL_GPL(media_entity_pads_init);
> bool media_entity_has_route(struct media_entity *entity, unsigned int pad0,
> unsigned int pad1)
> {
> + unsigned int i;
> + bool has_route;
> +
> if (pad0 >= entity->num_pads || pad1 >= entity->num_pads)
> return false;
>
> @@ -253,7 +256,34 @@ bool media_entity_has_route(struct media_entity *entity, unsigned int pad0,
> && entity->pads[pad1].flags & MEDIA_PAD_FL_SINK)
> swap(pad0, pad1);
>
> - return entity->ops->has_route(entity, pad0, pad1);
> + has_route = entity->ops->has_route(entity, pad0, pad1);
> + /* A direct route is returned immediately */
> + if (has_route ||
> + (entity->pads[pad0].flags & MEDIA_PAD_FL_SINK &&
> + entity->pads[pad1].flags & MEDIA_PAD_FL_SOURCE))
I'm not sure I get why you're using the || condition here.
I suspect it is in order to make sure the driver implementation of
ops->has_route() only checks for direct links, but wouldn't it be
better to clarify the function semantics instead of catching
'non-direct' routes returned here?
More generally, why not call ops->has_route() only in case pad0 and
pad1 have different type, and check for indirect links otherwise?
> + return true;
> +
> + /* Look for indirect routes */
> + for (i = 0; i < entity->num_pads; i++) {
> + if (i == pad0 || i == pad1)
> + continue;
This is correct, but the following check catches this condition as
well I think.
I assume if we fall down here pad0 and pad1 are of the same type and
if 'i' is one of the two pads it will have the same type as pad0, and
you're checking for this here below.
> +
> + /*
> + * There are no direct routes between same types of
> + * pads, so skip checking this route
> + */
> + if (!((entity->pads[pad0].flags ^ entity->pads[i].flags) &
> + (MEDIA_PAD_FL_SOURCE | MEDIA_PAD_FL_SINK)))
> + continue;
> +
> + /* Is there an indirect route? */
> + if (entity->ops->has_route(entity, i, pad0) &&
> + entity->ops->has_route(entity, i, pad1))
What guarantees here that i is a sink and pad0/pad1 are sources? It seems
the 'has_route' operation wants this, otherwise I don't see a reason
for "[PATCH 09/30] media: entity: Swap pads if route is checked from
source to sink". Did I miss something from that patch?
Sorry, lot of questions. I might be confused :/
Thanks
j
> + return true;
> + }
> +
> + return false;
> +
> }
> EXPORT_SYMBOL_GPL(media_entity_has_route);
>
> --
> 2.18.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH 16/30] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (14 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 15/30] media: entity: Look for indirect routes Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 17/30] v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING Niklas Söderlund
` (14 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Michal Simek
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
- Add sink and source streams for multiplexed links
- Copy the argument back in case of an error. This is needed to let the
caller know the number of routes.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/v4l2-core/v4l2-ioctl.c | 20 +++++++++++++-
drivers/media/v4l2-core/v4l2-subdev.c | 28 +++++++++++++++++++
include/media/v4l2-subdev.h | 7 +++++
include/uapi/linux/v4l2-subdev.h | 40 +++++++++++++++++++++++++++
4 files changed, 94 insertions(+), 1 deletion(-)
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 54afc9c7ee6ea162..68a0cf8b6f91208d 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/version.h>
+#include <linux/v4l2-subdev.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
@@ -2924,6 +2925,23 @@ static int check_array_args(unsigned int cmd, void *parg, size_t *array_size,
}
break;
}
+
+ case VIDIOC_SUBDEV_G_ROUTING:
+ case VIDIOC_SUBDEV_S_ROUTING: {
+ struct v4l2_subdev_routing *route = parg;
+
+ if (route->num_routes > 0) {
+ if (route->num_routes > 256)
+ return -EINVAL;
+
+ *user_ptr = (void __user *)route->routes;
+ *kernel_ptr = (void *)&route->routes;
+ *array_size = sizeof(struct v4l2_subdev_route)
+ * route->num_routes;
+ ret = 1;
+ }
+ break;
+ }
}
return ret;
@@ -3033,7 +3051,7 @@ video_usercopy(struct file *file, unsigned int cmd, unsigned long arg,
* Some ioctls can return an error, but still have valid
* results that must be returned.
*/
- if (err < 0 && !always_copy)
+ if (err < 0 && !always_copy && cmd != VIDIOC_SUBDEV_G_ROUTING)
goto out;
out_array_args:
diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
index 2b63fa6b6fc9a739..601a2b23f736b382 100644
--- a/drivers/media/v4l2-core/v4l2-subdev.c
+++ b/drivers/media/v4l2-core/v4l2-subdev.c
@@ -516,7 +516,35 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg)
case VIDIOC_SUBDEV_QUERYSTD:
return v4l2_subdev_call(sd, video, querystd, arg);
+
+ case VIDIOC_SUBDEV_G_ROUTING:
+ return v4l2_subdev_call(sd, pad, get_routing, arg);
+
+ case VIDIOC_SUBDEV_S_ROUTING: {
+ struct v4l2_subdev_routing *route = arg;
+ unsigned int i;
+
+ if (route->num_routes > sd->entity.num_pads)
+ return -EINVAL;
+
+ for (i = 0; i < route->num_routes; ++i) {
+ unsigned int sink = route->routes[i].sink_pad;
+ unsigned int source = route->routes[i].source_pad;
+ struct media_pad *pads = sd->entity.pads;
+
+ if (sink >= sd->entity.num_pads ||
+ source >= sd->entity.num_pads)
+ return -EINVAL;
+
+ if (!(pads[sink].flags & MEDIA_PAD_FL_SINK) ||
+ !(pads[source].flags & MEDIA_PAD_FL_SOURCE))
+ return -EINVAL;
+ }
+
+ return v4l2_subdev_call(sd, pad, set_routing, route);
+ }
#endif
+
default:
return v4l2_subdev_call(sd, core, ioctl, cmd, arg);
}
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 9102d6ca566e01f2..5acaeeb9b3cacefa 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -679,6 +679,9 @@ struct v4l2_subdev_pad_config {
*
* @set_frame_desc: set the low level media bus frame parameters, @fd array
* may be adjusted by the subdev driver to device capabilities.
+ *
+ * @get_routing: callback for VIDIOC_SUBDEV_G_ROUTING IOCTL handler.
+ * @set_routing: callback for VIDIOC_SUBDEV_S_ROUTING IOCTL handler.
*/
struct v4l2_subdev_pad_ops {
int (*init_cfg)(struct v4l2_subdev *sd,
@@ -719,6 +722,10 @@ struct v4l2_subdev_pad_ops {
struct v4l2_mbus_frame_desc *fd);
int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
struct v4l2_mbus_frame_desc *fd);
+ int (*get_routing)(struct v4l2_subdev *sd,
+ struct v4l2_subdev_routing *route);
+ int (*set_routing)(struct v4l2_subdev *sd,
+ struct v4l2_subdev_routing *route);
};
/**
diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h
index 03970ce3074193e6..af069bfb10ca23a5 100644
--- a/include/uapi/linux/v4l2-subdev.h
+++ b/include/uapi/linux/v4l2-subdev.h
@@ -155,6 +155,44 @@ struct v4l2_subdev_selection {
__u32 reserved[8];
};
+#define V4L2_SUBDEV_ROUTE_FL_ACTIVE (1 << 0)
+#define V4L2_SUBDEV_ROUTE_FL_IMMUTABLE (1 << 1)
+
+/**
+ * struct v4l2_subdev_route - A signal route inside a subdev
+ * @sink_pad: the sink pad
+ * @sink_stream: the sink stream
+ * @source_pad: the source pad
+ * @source_stream: the source stream
+ * @flags: route flags:
+ *
+ * V4L2_SUBDEV_ROUTE_FL_ACTIVE: Is the stream in use or not? An
+ * active stream will start when streaming is enabled on a video
+ * node. Set by the user.
+ *
+ * V4L2_SUBDEV_ROUTE_FL_IMMUTABLE: Is the stream immutable, i.e.
+ * can it be activated and inactivated? Set by the driver.
+ */
+struct v4l2_subdev_route {
+ __u32 sink_pad;
+ __u32 sink_stream;
+ __u32 source_pad;
+ __u32 source_stream;
+ __u32 flags;
+ __u32 reserved[5];
+};
+
+/**
+ * struct v4l2_subdev_routing - Routing information
+ * @routes: the routes array
+ * @num_routes: the total number of routes in the routes array
+ */
+struct v4l2_subdev_routing {
+ struct v4l2_subdev_route *routes;
+ __u32 num_routes;
+ __u32 reserved[5];
+};
+
/* Backwards compatibility define --- to be removed */
#define v4l2_subdev_edid v4l2_edid
@@ -181,5 +219,7 @@ struct v4l2_subdev_selection {
#define VIDIOC_SUBDEV_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings)
#define VIDIOC_SUBDEV_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings)
#define VIDIOC_SUBDEV_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap)
+#define VIDIOC_SUBDEV_G_ROUTING _IOWR('V', 38, struct v4l2_subdev_routing)
+#define VIDIOC_SUBDEV_S_ROUTING _IOWR('V', 39, struct v4l2_subdev_routing)
#endif
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 17/30] v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (15 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 16/30] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 18/30] v4l: subdev: Take routing information into account in link validation Niklas Söderlund
` (13 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Niklas Söderlund
From: Sakari Ailus <sakari.ailus@linux.intel.com>
Implement compat IOCTL handling for VIDIOC_SUBDEV_G_ROUTING and
VIDIOC_SUBDEV_S_ROUTING IOCTLs.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 75 +++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
index 6481212fda772c73..b9112d6909ce0859 100644
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -1045,6 +1045,64 @@ static int put_v4l2_event32(struct v4l2_event __user *p64,
return 0;
}
+struct v4l2_subdev_routing32 {
+ compat_caddr_t routes;
+ __u32 num_routes;
+ __u32 reserved[5];
+};
+
+static int get_v4l2_subdev_routing(struct v4l2_subdev_routing __user *kp,
+ struct v4l2_subdev_routing32 __user *up)
+{
+ struct v4l2_subdev_route __user *routes;
+ compat_caddr_t p;
+ u32 num_routes;
+
+ if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
+ get_user(p, &up->routes) ||
+ get_user(num_routes, &up->num_routes) ||
+ put_user(num_routes, &kp->num_routes) ||
+ copy_in_user(&kp->reserved, &up->reserved, sizeof(kp->reserved)) ||
+ num_routes > U32_MAX / sizeof(*kp->routes))
+ return -EFAULT;
+
+ routes = compat_ptr(p);
+
+ if (!access_ok(VERIFY_READ, routes,
+ num_routes * sizeof(*kp->routes)))
+ return -EFAULT;
+
+ if (put_user((__force struct v4l2_subdev_route *)routes,
+ &kp->routes))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int put_v4l2_subdev_routing(struct v4l2_subdev_routing __user *kp,
+ struct v4l2_subdev_routing32 __user *up)
+{
+ struct v4l2_subdev_route __user *routes;
+ compat_caddr_t p;
+ u32 num_routes;
+
+ if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
+ get_user(p, &up->routes) ||
+ get_user(num_routes, &kp->num_routes) ||
+ put_user(num_routes, &up->num_routes) ||
+ copy_in_user(&up->reserved, &kp->reserved, sizeof(kp->reserved)) ||
+ num_routes > U32_MAX / sizeof(*kp->routes))
+ return -EFAULT;
+
+ routes = compat_ptr(p);
+
+ if (!access_ok(VERIFY_WRITE, routes,
+ num_routes * sizeof(*kp->routes)))
+ return -EFAULT;
+
+ return 0;
+}
+
struct v4l2_edid32 {
__u32 pad;
__u32 start_block;
@@ -1117,6 +1175,8 @@ static int put_v4l2_edid32(struct v4l2_edid __user *p64,
#define VIDIOC_STREAMOFF32 _IOW ('V', 19, s32)
#define VIDIOC_G_INPUT32 _IOR ('V', 38, s32)
#define VIDIOC_S_INPUT32 _IOWR('V', 39, s32)
+#define VIDIOC_SUBDEV_G_ROUTING32 _IOWR('V', 38, struct v4l2_subdev_routing32)
+#define VIDIOC_SUBDEV_S_ROUTING32 _IOWR('V', 39, struct v4l2_subdev_routing32)
#define VIDIOC_G_OUTPUT32 _IOR ('V', 46, s32)
#define VIDIOC_S_OUTPUT32 _IOWR('V', 47, s32)
@@ -1195,6 +1255,8 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
case VIDIOC_STREAMOFF32: cmd = VIDIOC_STREAMOFF; break;
case VIDIOC_G_INPUT32: cmd = VIDIOC_G_INPUT; break;
case VIDIOC_S_INPUT32: cmd = VIDIOC_S_INPUT; break;
+ case VIDIOC_SUBDEV_G_ROUTING32: cmd = VIDIOC_SUBDEV_G_ROUTING; break;
+ case VIDIOC_SUBDEV_S_ROUTING32: cmd = VIDIOC_SUBDEV_S_ROUTING; break;
case VIDIOC_G_OUTPUT32: cmd = VIDIOC_G_OUTPUT; break;
case VIDIOC_S_OUTPUT32: cmd = VIDIOC_S_OUTPUT; break;
case VIDIOC_CREATE_BUFS32: cmd = VIDIOC_CREATE_BUFS; break;
@@ -1227,6 +1289,15 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
compatible_arg = 0;
break;
+ case VIDIOC_SUBDEV_G_ROUTING:
+ case VIDIOC_SUBDEV_S_ROUTING:
+ err = alloc_userspace(sizeof(struct v4l2_subdev_routing),
+ 0, &new_p64);
+ if (!err)
+ err = get_v4l2_subdev_routing(new_p64, p32);
+ compatible_arg = 0;
+ break;
+
case VIDIOC_G_EDID:
case VIDIOC_S_EDID:
err = alloc_userspace(sizeof(struct v4l2_edid), 0, &new_p64);
@@ -1368,6 +1439,10 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
if (put_v4l2_edid32(new_p64, p32))
err = -EFAULT;
break;
+ case VIDIOC_SUBDEV_G_ROUTING:
+ case VIDIOC_SUBDEV_S_ROUTING:
+ err = put_v4l2_subdev_routing(new_p64, p32);
+ break;
}
if (err)
return err;
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 18/30] v4l: subdev: Take routing information into account in link validation
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (16 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 17/30] v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 19/30] v4l: subdev: Improve link format validation debug messages Niklas Söderlund
` (12 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
The routing information is essential in link validation for multiplexed
links: the pads at the ends of a multiplexed link have no single format
defined for them. Instead, the format is accessible in the sink (or
source) pads of the sub-devices at both ends of that link.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/v4l2-core/v4l2-subdev.c | 217 ++++++++++++++++++++++++--
1 file changed, 203 insertions(+), 14 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
index 601a2b23f736b382..1f480ff6c29b4c0c 100644
--- a/drivers/media/v4l2-core/v4l2-subdev.c
+++ b/drivers/media/v4l2-core/v4l2-subdev.c
@@ -640,12 +640,17 @@ static int
v4l2_subdev_link_validate_get_format(struct media_pad *pad,
struct v4l2_subdev_format *fmt)
{
+ dev_dbg(pad->entity->graph_obj.mdev->dev,
+ "obtaining format on \"%s\":%u\n", pad->entity->name,
+ pad->index);
+
if (is_media_entity_v4l2_subdev(pad->entity)) {
struct v4l2_subdev *sd =
media_entity_to_v4l2_subdev(pad->entity);
fmt->which = V4L2_SUBDEV_FORMAT_ACTIVE;
fmt->pad = pad->index;
+
return v4l2_subdev_call(sd, pad, get_fmt, NULL, fmt);
}
@@ -656,31 +661,215 @@ v4l2_subdev_link_validate_get_format(struct media_pad *pad,
return -EINVAL;
}
-int v4l2_subdev_link_validate(struct media_link *link)
+static int v4l2_subdev_link_validate_one(struct media_link *link,
+ struct v4l2_subdev_format *source_fmt,
+ struct v4l2_subdev_format *sink_fmt)
{
struct v4l2_subdev *sink;
- struct v4l2_subdev_format sink_fmt, source_fmt;
int rval;
- rval = v4l2_subdev_link_validate_get_format(
- link->source, &source_fmt);
- if (rval < 0)
- return 0;
-
- rval = v4l2_subdev_link_validate_get_format(
- link->sink, &sink_fmt);
- if (rval < 0)
- return 0;
-
sink = media_entity_to_v4l2_subdev(link->sink->entity);
rval = v4l2_subdev_call(sink, pad, link_validate, link,
- &source_fmt, &sink_fmt);
+ source_fmt, sink_fmt);
if (rval != -ENOIOCTLCMD)
return rval;
return v4l2_subdev_link_validate_default(
- sink, link, &source_fmt, &sink_fmt);
+ sink, link, source_fmt, sink_fmt);
+}
+
+/* How many routes to assume there can be per a sub-device? */
+#define LINK_VALIDATE_ROUTES 8
+
+#define R_SRC 0
+#define R_SINK 1
+#define NR_R 2
+
+int v4l2_subdev_link_validate(struct media_link *link)
+{
+ struct v4l2_subdev *sink;
+ struct route_info {
+ struct v4l2_subdev_route routes[LINK_VALIDATE_ROUTES];
+ struct v4l2_subdev_routing routing;
+ bool has_route;
+ struct media_pad *pad;
+ /* Format for a non-multiplexed pad. */
+ struct v4l2_subdev_format fmt;
+ } r[NR_R] = {
+ {
+ /* Source end of the link */
+ .routing = {
+ .routes = r[R_SRC].routes,
+ .num_routes = ARRAY_SIZE(r[R_SRC].routes),
+ },
+ .pad = link->source,
+ },
+ {
+ /* Sink end of the link */
+ .routing = {
+ .routes = r[R_SINK].routes,
+ .num_routes = ARRAY_SIZE(r[R_SINK].routes),
+ },
+ .pad = link->sink,
+ },
+ };
+ unsigned int i, j;
+ int rval;
+
+ sink = media_entity_to_v4l2_subdev(link->sink->entity);
+
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "validating link \"%s\":%u -> \"%s\":%u\n",
+ link->source->entity->name, link->source->index,
+ sink->entity.name, link->sink->index);
+
+ for (i = 0; i < NR_R; i++) {
+ struct route_info *ri = &r[i];
+
+ ri->has_route = true;
+
+ rval = v4l2_subdev_call(
+ media_entity_to_v4l2_subdev(ri->pad->entity),
+ pad, get_routing, &ri->routing);
+
+ switch (rval) {
+ case 0:
+ break;
+ case -ENOIOCTLCMD:
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "no routing information on \"%s\":%u\n",
+ ri->pad->entity->name, ri->pad->index);
+ ri->has_route = false;
+ break;
+ default:
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "error %d in get_routing() on \"%s\":%u\n",
+ rval, ri->pad->entity->name, ri->pad->index);
+ return rval;
+ }
+
+ rval = v4l2_subdev_link_validate_get_format(ri->pad,
+ &ri->fmt);
+
+ if (!rval) {
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "format information available on \"%s\":%u\n",
+ ri->pad->entity->name, ri->pad->index);
+ ri->has_route = false;
+ }
+
+ if (!ri->has_route) {
+ ri->routing.num_routes = 1;
+ } else {
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "routes on \"%s\":%u:\n",
+ ri->pad->entity->name, ri->pad->index);
+ for (j = 0; j < ri->routing.num_routes; j++)
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "\t%u: %u/%u -> %u/%u\n", j,
+ ri->routing.routes[j].sink_pad,
+ ri->routing.routes[j].sink_stream,
+ ri->routing.routes[j].source_pad,
+ ri->routing.routes[j].source_stream);
+ }
+ }
+
+ for (i = 0, j = 0;
+ i < r[R_SRC].routing.num_routes &&
+ j < r[R_SINK].routing.num_routes; ) {
+ unsigned int *ro[] = { &i, &j };
+ unsigned int k;
+
+ /* Get the first active route for the sink pad. */
+ if (r[R_SINK].has_route &&
+ (r[R_SINK].routes[j].sink_pad != link->sink->index ||
+ !(r[R_SINK].routes[j].flags
+ & V4L2_SUBDEV_ROUTE_FL_ACTIVE))) {
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "skipping route %u/%u -> %u/%u[%u]\n",
+ r[R_SINK].routes[j].sink_pad,
+ r[R_SINK].routes[j].sink_stream,
+ r[R_SINK].routes[j].source_pad,
+ r[R_SINK].routes[j].source_stream,
+ (bool)(r[R_SINK].routes[j].flags
+ & V4L2_SUBDEV_ROUTE_FL_ACTIVE));
+ j++;
+ continue;
+ }
+
+ /*
+ * Get the corresponding route for the source pad.
+ * It's ok for the source pad to have routes active
+ * where the sink pad does not, but the routes that
+ * are active on the sink pad have to be active on
+ * the source pad as well.
+ */
+ if (r[R_SRC].has_route &&
+ (r[R_SRC].routes[i].source_pad != link->source->index ||
+ r[R_SRC].routes[i].source_stream
+ != r[R_SINK].routes[j].sink_stream)) {
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "skipping source route %u/%u -> %u/%u\n",
+ r[R_SRC].routes[i].sink_pad,
+ r[R_SRC].routes[i].sink_stream,
+ r[R_SRC].routes[i].source_pad,
+ r[R_SRC].routes[i].source_stream);
+ i++;
+ continue;
+ }
+
+ /* The source route must be active. */
+ if (r[R_SRC].has_route &&
+ !(r[R_SRC].routes[i].flags
+ & V4L2_SUBDEV_ROUTE_FL_ACTIVE)) {
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "source route not active\n");
+ return -EINVAL;
+ }
+
+ for (k = 0; k < NR_R; k++) {
+ if (r[k].has_route) {
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "validating %s route \"%s\": %u/%u -> %u/%u\n",
+ k == R_SINK ? "sink" : "source",
+ r[k].pad->entity->name,
+ r[k].routes[*ro[k]].sink_pad,
+ r[k].routes[*ro[k]].sink_stream,
+ r[k].routes[*ro[k]].source_pad,
+ r[k].routes[*ro[k]].source_stream);
+ rval = v4l2_subdev_link_validate_get_format(
+ &r[k].pad->entity->pads[
+ k == R_SINK
+ ? r[k].routes[*ro[k]].source_pad
+ : r[k].routes[*ro[k]].sink_pad],
+ &r[k].fmt);
+ } else {
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "routing not supported by \"%s\":%u",
+ r[k].pad->entity->name,
+ r[k].pad->index);
+ }
+ }
+
+ rval = v4l2_subdev_link_validate_one(
+ link, &r[R_SRC].fmt, &r[R_SINK].fmt);
+ if (rval) {
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "error %d in link validation\n", rval);
+ return rval;
+ }
+
+ i++, j++;
+ }
+
+ if (j < r[R_SINK].routing.num_routes) {
+ dev_dbg(sink->entity.graph_obj.mdev->dev,
+ "not all sink routes verified; out of source routes\n");
+ return -EINVAL;
+ }
+
+ return 0;
}
EXPORT_SYMBOL_GPL(v4l2_subdev_link_validate);
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 19/30] v4l: subdev: Improve link format validation debug messages
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (17 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 18/30] v4l: subdev: Take routing information into account in link validation Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 20/30] v4l: mc: Add an S_ROUTING helper function for power state changes Niklas Söderlund
` (11 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
The existing link format validation failure debug message in media-entity.c
helped to poinpoint the point of failure but provided no additional
information what's wrong. Tell the user exactly why the validation failed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/v4l2-core/v4l2-subdev.c | 40 ++++++++++++++++++++++-----
1 file changed, 33 insertions(+), 7 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
index 1f480ff6c29b4c0c..31f67daeadc1eaf2 100644
--- a/drivers/media/v4l2-core/v4l2-subdev.c
+++ b/drivers/media/v4l2-core/v4l2-subdev.c
@@ -618,21 +618,47 @@ int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd,
struct v4l2_subdev_format *source_fmt,
struct v4l2_subdev_format *sink_fmt)
{
+ bool pass = true;
+
/* The width, height and code must match. */
- if (source_fmt->format.width != sink_fmt->format.width
- || source_fmt->format.height != sink_fmt->format.height
- || source_fmt->format.code != sink_fmt->format.code)
- return -EPIPE;
+ if (source_fmt->format.width != sink_fmt->format.width) {
+ dev_dbg(sd->entity.graph_obj.mdev->dev,
+ "%s: width does not match (source %u, sink %u)\n",
+ __func__,
+ source_fmt->format.width, sink_fmt->format.width);
+ pass = false;
+ }
+
+ if (source_fmt->format.height != sink_fmt->format.height) {
+ dev_dbg(sd->entity.graph_obj.mdev->dev,
+ "%s: height does not match (source %u, sink %u)\n",
+ __func__,
+ source_fmt->format.height, sink_fmt->format.height);
+ pass = false;
+ }
+
+ if (source_fmt->format.code != sink_fmt->format.code) {
+ dev_dbg(sd->entity.graph_obj.mdev->dev,
+ "%s: media bus code does not match (source 0x%8.8x, sink 0x%8.8x)\n",
+ __func__,
+ source_fmt->format.code, sink_fmt->format.code);
+ pass = false;
+ }
/* The field order must match, or the sink field order must be NONE
* to support interlaced hardware connected to bridges that support
* progressive formats only.
*/
if (source_fmt->format.field != sink_fmt->format.field &&
- sink_fmt->format.field != V4L2_FIELD_NONE)
- return -EPIPE;
+ sink_fmt->format.field != V4L2_FIELD_NONE) {
+ dev_dbg(sd->entity.graph_obj.mdev->dev,
+ "%s: field does not match (source %u, sink %u)\n",
+ __func__,
+ source_fmt->format.field, sink_fmt->format.field);
+ pass = false;
+ }
- return 0;
+ return pass ? 0 : -EPIPE;
}
EXPORT_SYMBOL_GPL(v4l2_subdev_link_validate_default);
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 20/30] v4l: mc: Add an S_ROUTING helper function for power state changes
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (18 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 19/30] v4l: subdev: Improve link format validation debug messages Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 21/30] v4l: Add bus type to frame descriptors Niklas Söderlund
` (10 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
With the addition of the has_route() media entity operation, all pads of an
entity are no longer interconnected. The S_ROUTING IOCTL for sub-devices can
be used to enable and disable routes for an entity. The consequence is that
the routing information has to be taken into account in use count
calculation: disabling a route has a very similar effect on use counts as
has disabling a link.
Add a helper function for drivers implementing VIDIOC_SUBDEV_S_ROUTING
IOCTL to take the change into account.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/v4l2-core/v4l2-mc.c | 34 +++++++++++++++++++++++++++++++
include/media/v4l2-mc.h | 22 ++++++++++++++++++++
2 files changed, 56 insertions(+)
diff --git a/drivers/media/v4l2-core/v4l2-mc.c b/drivers/media/v4l2-core/v4l2-mc.c
index f702cac5205b3447..2ca4b0d62dd943ff 100644
--- a/drivers/media/v4l2-core/v4l2-mc.c
+++ b/drivers/media/v4l2-core/v4l2-mc.c
@@ -401,3 +401,37 @@ int v4l2_pipeline_link_notify(struct media_link *link, u32 flags,
return ret;
}
EXPORT_SYMBOL_GPL(v4l2_pipeline_link_notify);
+
+int v4l2_subdev_routing_pm_use(struct media_entity *entity,
+ struct v4l2_subdev_route *route)
+{
+ struct media_graph *graph =
+ &entity->graph_obj.mdev->pm_count_walk;
+ struct media_pad *source = &entity->pads[route->source_pad];
+ struct media_pad *sink = &entity->pads[route->sink_pad];
+ int source_use;
+ int sink_use;
+ int ret;
+
+ source_use = pipeline_pm_use_count(source, graph);
+ sink_use = pipeline_pm_use_count(sink, graph);
+
+ if (!(route->flags & V4L2_SUBDEV_ROUTE_FL_ACTIVE)) {
+ /* Route disabled. */
+ pipeline_pm_power(source, -sink_use, graph);
+ pipeline_pm_power(sink, -source_use, graph);
+ return 0;
+ }
+
+ /* Route enabled. */
+ ret = pipeline_pm_power(source, sink_use, graph);
+ if (ret < 0)
+ return ret;
+
+ ret = pipeline_pm_power(sink, source_use, graph);
+ if (ret < 0)
+ pipeline_pm_power(source, -sink_use, graph);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(v4l2_subdev_routing_pm_use);
diff --git a/include/media/v4l2-mc.h b/include/media/v4l2-mc.h
index 2634d9dc9916e3c4..ea0a54bd951f5330 100644
--- a/include/media/v4l2-mc.h
+++ b/include/media/v4l2-mc.h
@@ -104,6 +104,7 @@ enum demod_pad_index {
/* We don't need to include pci.h or usb.h here */
struct pci_dev;
struct usb_device;
+struct v4l2_subdev_route;
#ifdef CONFIG_MEDIA_CONTROLLER
/**
@@ -210,6 +211,22 @@ int v4l2_pipeline_pm_use(struct media_entity *entity, int use);
int v4l2_pipeline_link_notify(struct media_link *link, u32 flags,
unsigned int notification);
+/**
+ * v4l2_subdev_routing_pm_use - Handle power state changes due to S_ROUTING
+ * @entity: The entity
+ * @route: The new state of the route
+ *
+ * Propagate the use count across a route in a pipeline whenever the
+ * route is enabled or disabled. The function is called before
+ * changing the route state when enabling a route, and after changing
+ * the route state when disabling a route.
+ *
+ * Return 0 on success or a negative error code on failure. Powering entities
+ * off is assumed to never fail. This function will not fail for disconnection
+ * events.
+ */
+int v4l2_subdev_routing_pm_use(struct media_entity *entity,
+ struct v4l2_subdev_route *route);
#else /* CONFIG_MEDIA_CONTROLLER */
static inline int v4l2_mc_create_media_graph(struct media_device *mdev)
@@ -242,5 +259,10 @@ static inline int v4l2_pipeline_link_notify(struct media_link *link, u32 flags,
return 0;
}
+static inline int v4l2_subdev_routing_pm_use(struct media_entity *entity,
+ struct v4l2_subdev_route *route)
+{
+ return 0;
+}
#endif /* CONFIG_MEDIA_CONTROLLER */
#endif /* _V4L2_MC_H */
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 21/30] v4l: Add bus type to frame descriptors
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (19 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 20/30] v4l: mc: Add an S_ROUTING helper function for power state changes Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-11-02 12:27 ` Kieran Bingham
2018-08-23 13:25 ` [PATCH 22/30] v4l: Add CSI-2 bus configuration " Niklas Söderlund
` (9 subsequent siblings)
30 siblings, 1 reply; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
include/media/v4l2-subdev.h | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 5acaeeb9b3cacefa..ac1f7ee4cdb978ad 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -349,12 +349,21 @@ struct v4l2_mbus_frame_desc_entry {
#define V4L2_FRAME_DESC_ENTRY_MAX 4
+enum {
+ V4L2_MBUS_FRAME_DESC_TYPE_PLATFORM,
+ V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL,
+ V4L2_MBUS_FRAME_DESC_TYPE_CCP2,
+ V4L2_MBUS_FRAME_DESC_TYPE_CSI2,
+};
+
/**
* struct v4l2_mbus_frame_desc - media bus data frame description
+ * @type: type of the bus (V4L2_MBUS_FRAME_DESC_TYPE_*)
* @entry: frame descriptors array
* @num_entries: number of entries in @entry array
*/
struct v4l2_mbus_frame_desc {
+ u32 type;
struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX];
unsigned short num_entries;
};
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH 21/30] v4l: Add bus type to frame descriptors
2018-08-23 13:25 ` [PATCH 21/30] v4l: Add bus type to frame descriptors Niklas Söderlund
@ 2018-11-02 12:27 ` Kieran Bingham
2018-11-02 13:15 ` Sakari Ailus
0 siblings, 1 reply; 47+ messages in thread
From: Kieran Bingham @ 2018-11-02 12:27 UTC (permalink / raw)
To: Niklas Söderlund, Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc
Hi Niklas, Sakari
On 23/08/2018 14:25, Niklas Söderlund wrote:
> From: Sakari Ailus <sakari.ailus@linux.intel.com>
>
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
> include/media/v4l2-subdev.h | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
> index 5acaeeb9b3cacefa..ac1f7ee4cdb978ad 100644
> --- a/include/media/v4l2-subdev.h
> +++ b/include/media/v4l2-subdev.h
> @@ -349,12 +349,21 @@ struct v4l2_mbus_frame_desc_entry {
>
> #define V4L2_FRAME_DESC_ENTRY_MAX 4
>
> +enum {
> + V4L2_MBUS_FRAME_DESC_TYPE_PLATFORM,
> + V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL,
> + V4L2_MBUS_FRAME_DESC_TYPE_CCP2,
> + V4L2_MBUS_FRAME_DESC_TYPE_CSI2,
Does this need to be extended to differentiate CSI2 DPHY/CPHY as has
been done in the v4l2_mbus_config structures?
> +};
> +
> /**
> * struct v4l2_mbus_frame_desc - media bus data frame description
> + * @type: type of the bus (V4L2_MBUS_FRAME_DESC_TYPE_*)
> * @entry: frame descriptors array
> * @num_entries: number of entries in @entry array
> */
> struct v4l2_mbus_frame_desc {
> + u32 type;
> struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX];
> unsigned short num_entries;
> };
>
--
Regards
--
Kieran
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH 21/30] v4l: Add bus type to frame descriptors
2018-11-02 12:27 ` Kieran Bingham
@ 2018-11-02 13:15 ` Sakari Ailus
0 siblings, 0 replies; 47+ messages in thread
From: Sakari Ailus @ 2018-11-02 13:15 UTC (permalink / raw)
To: Kieran Bingham
Cc: Niklas Söderlund, Laurent Pinchart, linux-media, linux-renesas-soc
Hi Kieran,
On Fri, Nov 02, 2018 at 12:27:11PM +0000, Kieran Bingham wrote:
> Hi Niklas, Sakari
>
> On 23/08/2018 14:25, Niklas Söderlund wrote:
> > From: Sakari Ailus <sakari.ailus@linux.intel.com>
> >
> > Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > ---
> > include/media/v4l2-subdev.h | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
> > index 5acaeeb9b3cacefa..ac1f7ee4cdb978ad 100644
> > --- a/include/media/v4l2-subdev.h
> > +++ b/include/media/v4l2-subdev.h
> > @@ -349,12 +349,21 @@ struct v4l2_mbus_frame_desc_entry {
> >
> > #define V4L2_FRAME_DESC_ENTRY_MAX 4
> >
> > +enum {
> > + V4L2_MBUS_FRAME_DESC_TYPE_PLATFORM,
> > + V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL,
> > + V4L2_MBUS_FRAME_DESC_TYPE_CCP2,
> > + V4L2_MBUS_FRAME_DESC_TYPE_CSI2,
>
> Does this need to be extended to differentiate CSI2 DPHY/CPHY as has
> been done in the v4l2_mbus_config structures?
I'd say no; the PHY isn't really relevant at this level. The configuration
from fwnode should suffice.
--
Regards,
Sakari Ailus
sakari.ailus@linux.intel.com
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH 21/30] v4l: Add bus type to frame descriptors
@ 2018-11-02 13:15 ` Sakari Ailus
0 siblings, 0 replies; 47+ messages in thread
From: Sakari Ailus @ 2018-11-02 13:15 UTC (permalink / raw)
To: Kieran Bingham
Cc: Niklas Söderlund, Laurent Pinchart, linux-media, linux-renesas-soc
Hi Kieran,
On Fri, Nov 02, 2018 at 12:27:11PM +0000, Kieran Bingham wrote:
> Hi Niklas, Sakari
>
> On 23/08/2018 14:25, Niklas S�derlund wrote:
> > From: Sakari Ailus <sakari.ailus@linux.intel.com>
> >
> > Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > ---
> > include/media/v4l2-subdev.h | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
> > index 5acaeeb9b3cacefa..ac1f7ee4cdb978ad 100644
> > --- a/include/media/v4l2-subdev.h
> > +++ b/include/media/v4l2-subdev.h
> > @@ -349,12 +349,21 @@ struct v4l2_mbus_frame_desc_entry {
> >
> > #define V4L2_FRAME_DESC_ENTRY_MAX 4
> >
> > +enum {
> > + V4L2_MBUS_FRAME_DESC_TYPE_PLATFORM,
> > + V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL,
> > + V4L2_MBUS_FRAME_DESC_TYPE_CCP2,
> > + V4L2_MBUS_FRAME_DESC_TYPE_CSI2,
>
> Does this need to be extended to differentiate CSI2 DPHY/CPHY as has
> been done in the v4l2_mbus_config structures?
I'd say no; the PHY isn't really relevant at this level. The configuration
from fwnode should suffice.
--
Regards,
Sakari Ailus
sakari.ailus@linux.intel.com
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH 21/30] v4l: Add bus type to frame descriptors
2018-11-02 13:15 ` Sakari Ailus
(?)
@ 2018-11-02 13:35 ` Kieran Bingham
2018-11-02 14:18 ` Sakari Ailus
-1 siblings, 1 reply; 47+ messages in thread
From: Kieran Bingham @ 2018-11-02 13:35 UTC (permalink / raw)
To: Sakari Ailus
Cc: Niklas Söderlund, Laurent Pinchart, linux-media, linux-renesas-soc
Hi Sakari, Niklas,
On 02/11/2018 13:15, Sakari Ailus wrote:
> Hi Kieran,
>
> On Fri, Nov 02, 2018 at 12:27:11PM +0000, Kieran Bingham wrote:
>> Hi Niklas, Sakari
>>
>> On 23/08/2018 14:25, Niklas Söderlund wrote:
>>> From: Sakari Ailus <sakari.ailus@linux.intel.com>
>>>
>>> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
>>> ---
>>> include/media/v4l2-subdev.h | 9 +++++++++
>>> 1 file changed, 9 insertions(+)
>>>
>>> diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
>>> index 5acaeeb9b3cacefa..ac1f7ee4cdb978ad 100644
>>> --- a/include/media/v4l2-subdev.h
>>> +++ b/include/media/v4l2-subdev.h
>>> @@ -349,12 +349,21 @@ struct v4l2_mbus_frame_desc_entry {
>>>
>>> #define V4L2_FRAME_DESC_ENTRY_MAX 4
>>>
>>> +enum {
>>> + V4L2_MBUS_FRAME_DESC_TYPE_PLATFORM,
>>> + V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL,
>>> + V4L2_MBUS_FRAME_DESC_TYPE_CCP2,
>>> + V4L2_MBUS_FRAME_DESC_TYPE_CSI2,
>>
>> Does this need to be extended to differentiate CSI2 DPHY/CPHY as has
>> been done in the v4l2_mbus_config structures?
>
> I'd say no; the PHY isn't really relevant at this level. The configuration
> from fwnode should suffice.
Great - Thanks for the feedback.
Well then - now that I've gone through the patch - and the PHY type
naming is cleared up, I can add:
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
(I guess Niklas can pick up that tag currently)
Although - we're missing any commit message other than the commit title.
Should something be added?
There's not much to describe above the title really.
--
Regards
--
Kieran
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH 21/30] v4l: Add bus type to frame descriptors
2018-11-02 13:35 ` Kieran Bingham
@ 2018-11-02 14:18 ` Sakari Ailus
0 siblings, 0 replies; 47+ messages in thread
From: Sakari Ailus @ 2018-11-02 14:18 UTC (permalink / raw)
To: Kieran Bingham
Cc: Niklas Söderlund, Laurent Pinchart, linux-media, linux-renesas-soc
On Fri, Nov 02, 2018 at 01:35:02PM +0000, Kieran Bingham wrote:
> Hi Sakari, Niklas,
>
> On 02/11/2018 13:15, Sakari Ailus wrote:
> > Hi Kieran,
> >
> > On Fri, Nov 02, 2018 at 12:27:11PM +0000, Kieran Bingham wrote:
> >> Hi Niklas, Sakari
> >>
> >> On 23/08/2018 14:25, Niklas Söderlund wrote:
> >>> From: Sakari Ailus <sakari.ailus@linux.intel.com>
> >>>
> >>> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> >>> ---
> >>> include/media/v4l2-subdev.h | 9 +++++++++
> >>> 1 file changed, 9 insertions(+)
> >>>
> >>> diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
> >>> index 5acaeeb9b3cacefa..ac1f7ee4cdb978ad 100644
> >>> --- a/include/media/v4l2-subdev.h
> >>> +++ b/include/media/v4l2-subdev.h
> >>> @@ -349,12 +349,21 @@ struct v4l2_mbus_frame_desc_entry {
> >>>
> >>> #define V4L2_FRAME_DESC_ENTRY_MAX 4
> >>>
> >>> +enum {
> >>> + V4L2_MBUS_FRAME_DESC_TYPE_PLATFORM,
> >>> + V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL,
> >>> + V4L2_MBUS_FRAME_DESC_TYPE_CCP2,
> >>> + V4L2_MBUS_FRAME_DESC_TYPE_CSI2,
> >>
> >> Does this need to be extended to differentiate CSI2 DPHY/CPHY as has
> >> been done in the v4l2_mbus_config structures?
> >
> > I'd say no; the PHY isn't really relevant at this level. The configuration
> > from fwnode should suffice.
>
> Great - Thanks for the feedback.
>
>
> Well then - now that I've gone through the patch - and the PHY type
> naming is cleared up, I can add:
>
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>
> (I guess Niklas can pick up that tag currently)
>
> Although - we're missing any commit message other than the commit title.
> Should something be added?
>
> There's not much to describe above the title really.
Oh, indeed.
How about this:
The type will be used to determine which bus specific frame descriptor
struct is applicable to a given frame descriptor.
--
Regards,
Sakari Ailus
sakari.ailus@linux.intel.com
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH 21/30] v4l: Add bus type to frame descriptors
@ 2018-11-02 14:18 ` Sakari Ailus
0 siblings, 0 replies; 47+ messages in thread
From: Sakari Ailus @ 2018-11-02 14:18 UTC (permalink / raw)
To: Kieran Bingham
Cc: Niklas Söderlund, Laurent Pinchart, linux-media, linux-renesas-soc
On Fri, Nov 02, 2018 at 01:35:02PM +0000, Kieran Bingham wrote:
> Hi Sakari, Niklas,
>
> On 02/11/2018 13:15, Sakari Ailus wrote:
> > Hi Kieran,
> >
> > On Fri, Nov 02, 2018 at 12:27:11PM +0000, Kieran Bingham wrote:
> >> Hi Niklas, Sakari
> >>
> >> On 23/08/2018 14:25, Niklas S�derlund wrote:
> >>> From: Sakari Ailus <sakari.ailus@linux.intel.com>
> >>>
> >>> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> >>> ---
> >>> include/media/v4l2-subdev.h | 9 +++++++++
> >>> 1 file changed, 9 insertions(+)
> >>>
> >>> diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
> >>> index 5acaeeb9b3cacefa..ac1f7ee4cdb978ad 100644
> >>> --- a/include/media/v4l2-subdev.h
> >>> +++ b/include/media/v4l2-subdev.h
> >>> @@ -349,12 +349,21 @@ struct v4l2_mbus_frame_desc_entry {
> >>>
> >>> #define V4L2_FRAME_DESC_ENTRY_MAX 4
> >>>
> >>> +enum {
> >>> + V4L2_MBUS_FRAME_DESC_TYPE_PLATFORM,
> >>> + V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL,
> >>> + V4L2_MBUS_FRAME_DESC_TYPE_CCP2,
> >>> + V4L2_MBUS_FRAME_DESC_TYPE_CSI2,
> >>
> >> Does this need to be extended to differentiate CSI2 DPHY/CPHY as has
> >> been done in the v4l2_mbus_config structures?
> >
> > I'd say no; the PHY isn't really relevant at this level. The configuration
> > from fwnode should suffice.
>
> Great - Thanks for the feedback.
>
>
> Well then - now that I've gone through the patch - and the PHY type
> naming is cleared up, I can add:
>
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>
> (I guess Niklas can pick up that tag currently)
>
> Although - we're missing any commit message other than the commit title.
> Should something be added?
>
> There's not much to describe above the title really.
Oh, indeed.
How about this:
The type will be used to determine which bus specific frame descriptor
struct is applicable to a given frame descriptor.
--
Regards,
Sakari Ailus
sakari.ailus@linux.intel.com
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH 21/30] v4l: Add bus type to frame descriptors
2018-11-02 14:18 ` Sakari Ailus
(?)
@ 2018-11-02 14:40 ` Kieran Bingham
-1 siblings, 0 replies; 47+ messages in thread
From: Kieran Bingham @ 2018-11-02 14:40 UTC (permalink / raw)
To: Sakari Ailus
Cc: Niklas Söderlund, Laurent Pinchart, linux-media, linux-renesas-soc
Hi Sakari,
On 02/11/2018 14:18, Sakari Ailus wrote:
> On Fri, Nov 02, 2018 at 01:35:02PM +0000, Kieran Bingham wrote:
>> Hi Sakari, Niklas,
>>
>> On 02/11/2018 13:15, Sakari Ailus wrote:
>>> Hi Kieran,
>>>
>>> On Fri, Nov 02, 2018 at 12:27:11PM +0000, Kieran Bingham wrote:
>>>> Hi Niklas, Sakari
>>>>
>>>> On 23/08/2018 14:25, Niklas Söderlund wrote:
>>>>> From: Sakari Ailus <sakari.ailus@linux.intel.com>
>>>>>
>>>>> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
>>>>> ---
>>>>> include/media/v4l2-subdev.h | 9 +++++++++
>>>>> 1 file changed, 9 insertions(+)
>>>>>
>>>>> diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
>>>>> index 5acaeeb9b3cacefa..ac1f7ee4cdb978ad 100644
>>>>> --- a/include/media/v4l2-subdev.h
>>>>> +++ b/include/media/v4l2-subdev.h
>>>>> @@ -349,12 +349,21 @@ struct v4l2_mbus_frame_desc_entry {
>>>>>
>>>>> #define V4L2_FRAME_DESC_ENTRY_MAX 4
>>>>>
>>>>> +enum {
>>>>> + V4L2_MBUS_FRAME_DESC_TYPE_PLATFORM,
>>>>> + V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL,
>>>>> + V4L2_MBUS_FRAME_DESC_TYPE_CCP2,
>>>>> + V4L2_MBUS_FRAME_DESC_TYPE_CSI2,
>>>>
>>>> Does this need to be extended to differentiate CSI2 DPHY/CPHY as has
>>>> been done in the v4l2_mbus_config structures?
>>>
>>> I'd say no; the PHY isn't really relevant at this level. The configuration
>>> from fwnode should suffice.
>>
>> Great - Thanks for the feedback.
>>
>>
>> Well then - now that I've gone through the patch - and the PHY type
>> naming is cleared up, I can add:
>>
>> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>>
>> (I guess Niklas can pick up that tag currently)
>>
>> Although - we're missing any commit message other than the commit title.
>> Should something be added?
>>
>> There's not much to describe above the title really.
>
> Oh, indeed.
>
> How about this:
>
> The type will be used to determine which bus specific frame descriptor
> struct is applicable to a given frame descriptor.
Looks good to me!
--
Regards
--
Kieran
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH 22/30] v4l: Add CSI-2 bus configuration to frame descriptors
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (20 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 21/30] v4l: Add bus type to frame descriptors Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 23/30] v4l: Add stream to frame descriptor Niklas Söderlund
` (8 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
Add CSI-2 bus specific configuration to the frame descriptors. This allows
obtaining the virtual channel and data type information for each stream
the transmitter is sending.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
include/media/v4l2-subdev.h | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index ac1f7ee4cdb978ad..ffd98e4f368358a6 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -317,6 +317,17 @@ struct v4l2_subdev_audio_ops {
int (*s_stream)(struct v4l2_subdev *sd, int enable);
};
+/**
+ * struct v4l2_mbus_frame_desc_entry_csi2
+ *
+ * @channel: CSI-2 virtual channel
+ * @data_type: CSI-2 data type ID
+ */
+struct v4l2_mbus_frame_desc_entry_csi2 {
+ u8 channel;
+ u8 data_type;
+};
+
/**
* enum v4l2_mbus_frame_desc_entry - media bus frame description flags
*
@@ -340,11 +351,16 @@ enum v4l2_mbus_frame_desc_flags {
* %FRAME_DESC_FL_BLOB is not set.
* @length: number of octets per frame, valid if @flags
* %V4L2_MBUS_FRAME_DESC_FL_LEN_MAX is set.
+ * @bus: Bus specific frame descriptor parameters
+ * @bus.csi2: CSI-2 specific bus configuration
*/
struct v4l2_mbus_frame_desc_entry {
enum v4l2_mbus_frame_desc_flags flags;
u32 pixelcode;
u32 length;
+ union {
+ struct v4l2_mbus_frame_desc_entry_csi2 csi2;
+ } bus;
};
#define V4L2_FRAME_DESC_ENTRY_MAX 4
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 23/30] v4l: Add stream to frame descriptor
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (21 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 22/30] v4l: Add CSI-2 bus configuration " Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 24/30] adv748x: csi2: add translation from pixelcode to CSI-2 datatype Niklas Söderlund
` (7 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media; +Cc: linux-renesas-soc
From: Sakari Ailus <sakari.ailus@linux.intel.com>
The stream field identifies the stream this frame descriptor applies to in
routing configuration across a multiplexed link.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
include/media/v4l2-subdev.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index ffd98e4f368358a6..5fbce1932107a990 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -347,6 +347,7 @@ enum v4l2_mbus_frame_desc_flags {
* struct v4l2_mbus_frame_desc_entry - media bus frame description structure
*
* @flags: bitmask flags, as defined by &enum v4l2_mbus_frame_desc_flags.
+ * @stream: stream in routing configuration
* @pixelcode: media bus pixel code, valid if @flags
* %FRAME_DESC_FL_BLOB is not set.
* @length: number of octets per frame, valid if @flags
@@ -356,6 +357,7 @@ enum v4l2_mbus_frame_desc_flags {
*/
struct v4l2_mbus_frame_desc_entry {
enum v4l2_mbus_frame_desc_flags flags;
+ u32 stream;
u32 pixelcode;
u32 length;
union {
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 24/30] adv748x: csi2: add translation from pixelcode to CSI-2 datatype
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (22 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 23/30] v4l: Add stream to frame descriptor Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 25/30] adv748x: csi2: only allow formats on sink pads Niklas Söderlund
` (6 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Niklas Söderlund
Prepare to implement frame descriptors to support multiplexed streams by
adding a function to map pixelcode to CSI-2 datatype. This is needed to
properly be able to fill out the struct v4l2_mbus_frame_desc.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/media/i2c/adv748x/adv748x-csi2.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 469be87a3761feb5..b759a7e22fbc98df 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -18,6 +18,28 @@
#include "adv748x.h"
+struct adv748x_csi2_format {
+ unsigned int code;
+ unsigned int datatype;
+};
+
+static const struct adv748x_csi2_format adv748x_csi2_formats[] = {
+ { .code = MEDIA_BUS_FMT_RGB888_1X24, .datatype = 0x24, },
+ { .code = MEDIA_BUS_FMT_UYVY8_1X16, .datatype = 0x1e, },
+ { .code = MEDIA_BUS_FMT_UYVY8_2X8, .datatype = 0x1e, },
+ { .code = MEDIA_BUS_FMT_YUYV10_2X10, .datatype = 0x1e, },
+};
+
+static unsigned int adv748x_csi2_code_to_datatype(unsigned int code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(adv748x_csi2_formats); i++)
+ if (adv748x_csi2_formats[i].code == code)
+ return adv748x_csi2_formats[i].datatype;
+ return 0;
+}
+
static bool is_txa(struct adv748x_csi2 *tx)
{
return tx == &tx->state->txa;
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 25/30] adv748x: csi2: only allow formats on sink pads
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (23 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 24/30] adv748x: csi2: add translation from pixelcode to CSI-2 datatype Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 26/30] adv748x: csi2: describe the multiplexed stream Niklas Söderlund
` (5 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Niklas Söderlund
Once the CSI-2 subdevice of the ADV748X becomes aware of multiplexed
streams the format of the source pad is of no value as it carries
multiple streams. Prepare for this by explicitly denying setting a
format on anything but the sink pad.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/media/i2c/adv748x/adv748x-csi2.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index b759a7e22fbc98df..9f736da2ad60160f 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -172,6 +172,9 @@ static int adv748x_csi2_get_format(struct v4l2_subdev *sd,
struct adv748x_state *state = tx->state;
struct v4l2_mbus_framefmt *mbusformat;
+ if (sdformat->pad != ADV748X_CSI2_SINK)
+ return -EINVAL;
+
mbusformat = adv748x_csi2_get_pad_format(sd, cfg, sdformat->pad,
sdformat->which);
if (!mbusformat)
@@ -195,6 +198,9 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *mbusformat;
int ret = 0;
+ if (sdformat->pad != ADV748X_CSI2_SINK)
+ return -EINVAL;
+
mbusformat = adv748x_csi2_get_pad_format(sd, cfg, sdformat->pad,
sdformat->which);
if (!mbusformat)
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 26/30] adv748x: csi2: describe the multiplexed stream
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (24 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 25/30] adv748x: csi2: only allow formats on sink pads Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 27/30] adv748x: csi2: add internal routing configuration Niklas Söderlund
` (4 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Niklas Söderlund
The adv748x CSI-2 transmitter can only transmit one stream over the
CSI-2 link, however it can choose which virtual channel is used. This
choice effects the CSI-2 receiver and needs to be captured in the frame
descriptor information, solve this by implementing .get_frame_desc().
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/media/i2c/adv748x/adv748x-csi2.c | 31 +++++++++++++++++++++++-
drivers/media/i2c/adv748x/adv748x.h | 1 +
2 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 9f736da2ad60160f..5087b87a2c2e8f7d 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -231,9 +231,37 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
return ret;
}
+static int adv748x_csi2_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_frame_desc *fd)
+{
+ struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
+ struct v4l2_mbus_framefmt *mbusformat;
+
+ memset(fd, 0, sizeof(*fd));
+
+ if (pad != ADV748X_CSI2_SOURCE)
+ return -EINVAL;
+
+ mbusformat = adv748x_csi2_get_pad_format(sd, NULL, ADV748X_CSI2_SINK,
+ V4L2_SUBDEV_FORMAT_ACTIVE);
+ if (!mbusformat)
+ return -EINVAL;
+
+ fd->entry->stream = tx->vc;
+ fd->entry->bus.csi2.channel = tx->vc;
+ fd->entry->bus.csi2.data_type =
+ adv748x_csi2_code_to_datatype(mbusformat->code);
+
+ fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
+ fd->num_entries = 1;
+
+ return 0;
+}
+
static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = {
.get_fmt = adv748x_csi2_get_format,
.set_fmt = adv748x_csi2_set_format,
+ .get_frame_desc = adv748x_csi2_get_frame_desc,
};
/* -----------------------------------------------------------------------------
@@ -309,7 +337,8 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
}
/* Initialise the virtual channel */
- adv748x_csi2_set_virtual_channel(tx, 0);
+ tx->vc = 0;
+ adv748x_csi2_set_virtual_channel(tx, tx->vc);
adv748x_subdev_init(&tx->sd, state, &adv748x_csi2_ops,
MEDIA_ENT_F_VID_IF_BRIDGE,
diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
index 65f83741277e1365..90901b8a4e027ae5 100644
--- a/drivers/media/i2c/adv748x/adv748x.h
+++ b/drivers/media/i2c/adv748x/adv748x.h
@@ -80,6 +80,7 @@ enum adv748x_csi2_pads {
struct adv748x_csi2 {
struct adv748x_state *state;
+ unsigned int vc;
struct v4l2_mbus_framefmt format;
unsigned int page;
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 27/30] adv748x: csi2: add internal routing configuration
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (25 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 26/30] adv748x: csi2: describe the multiplexed stream Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 28/30] adv748x: afe: add routing support Niklas Söderlund
` (3 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Niklas Söderlund
Add support to get and set the internal routing between the adv748x
CSI-2 transmitters sink pad and its multiplexed source pad. This routing
includes which stream of the multiplexed pad to use, allowing the user
to select which CSI-2 virtual channel to use when transmitting the
stream.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/media/i2c/adv748x/adv748x-csi2.c | 65 ++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 5087b87a2c2e8f7d..7bd4566807d0a4ee 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -18,6 +18,8 @@
#include "adv748x.h"
+#define ADV748X_CSI2_ROUTES_MAX 4
+
struct adv748x_csi2_format {
unsigned int code;
unsigned int datatype;
@@ -258,10 +260,73 @@ static int adv748x_csi2_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
return 0;
}
+static int adv748x_csi2_get_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_routing *routing)
+{
+ struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
+ struct v4l2_subdev_route *r = routing->routes;
+ unsigned int vc;
+
+ if (routing->num_routes < ADV748X_CSI2_ROUTES_MAX) {
+ routing->num_routes = ADV748X_CSI2_ROUTES_MAX;
+ return -ENOSPC;
+ }
+
+ routing->num_routes = ADV748X_CSI2_ROUTES_MAX;
+
+ for (vc = 0; vc < ADV748X_CSI2_ROUTES_MAX; vc++) {
+ r->sink_pad = ADV748X_CSI2_SINK;
+ r->sink_stream = 0;
+ r->source_pad = ADV748X_CSI2_SOURCE;
+ r->source_stream = vc;
+ r->flags = vc == tx->vc ? V4L2_SUBDEV_ROUTE_FL_ACTIVE : 0;
+ r++;
+ }
+
+ return 0;
+}
+
+static int adv748x_csi2_set_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_routing *routing)
+{
+ struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
+ struct v4l2_subdev_route *r = routing->routes;
+ unsigned int i;
+ int vc = -1;
+
+ if (routing->num_routes > ADV748X_CSI2_ROUTES_MAX)
+ return -ENOSPC;
+
+ for (i = 0; i < routing->num_routes; i++) {
+ if (r->sink_pad != ADV748X_CSI2_SINK ||
+ r->sink_stream != 0 ||
+ r->source_pad != ADV748X_CSI2_SOURCE ||
+ r->source_stream >= ADV748X_CSI2_ROUTES_MAX)
+ return -EINVAL;
+
+ if (r->flags & V4L2_SUBDEV_ROUTE_FL_ACTIVE) {
+ if (vc != -1)
+ return -EMLINK;
+
+ vc = r->source_stream;
+ }
+ r++;
+ }
+
+ if (vc != -1)
+ tx->vc = vc;
+
+ adv748x_csi2_set_virtual_channel(tx, tx->vc);
+
+ return 0;
+}
+
static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = {
.get_fmt = adv748x_csi2_get_format,
.set_fmt = adv748x_csi2_set_format,
.get_frame_desc = adv748x_csi2_get_frame_desc,
+ .get_routing = adv748x_csi2_get_routing,
+ .set_routing = adv748x_csi2_set_routing,
};
/* -----------------------------------------------------------------------------
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 28/30] adv748x: afe: add routing support
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (26 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 27/30] adv748x: csi2: add internal routing configuration Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-23 13:25 ` [PATCH 29/30] rcar-csi2: use frame description information to configure CSI-2 bus Niklas Söderlund
` (2 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Niklas Söderlund
The adv748x afe has eight analog sink pads, currently one of them is
chosen to be the active route based on device tree configuration. With
the new routing API it's possible to expose and change which of the
eight sink pads are routed to the source pad.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/media/i2c/adv748x/adv748x-afe.c | 65 +++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c
index edd25e895e5dec3c..dac0e9e385e7791a 100644
--- a/drivers/media/i2c/adv748x/adv748x-afe.c
+++ b/drivers/media/i2c/adv748x/adv748x-afe.c
@@ -43,6 +43,9 @@
#define ADV748X_AFE_STD_PAL_SECAM 0xe
#define ADV748X_AFE_STD_PAL_SECAM_PED 0xf
+#define ADV748X_AFE_ROUTES_MAX ((ADV748X_AFE_SINK_AIN7 - \
+ ADV748X_AFE_SINK_AIN0) + 1)
+
static int adv748x_afe_read_ro_map(struct adv748x_state *state, u8 reg)
{
int ret;
@@ -387,10 +390,72 @@ static int adv748x_afe_set_format(struct v4l2_subdev *sd,
return 0;
}
+static int adv748x_afe_get_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_routing *routing)
+{
+ struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
+ struct v4l2_subdev_route *r = routing->routes;
+ unsigned int i;
+
+ /* There is one possible route from each sink */
+ if (routing->num_routes < ADV748X_AFE_ROUTES_MAX) {
+ routing->num_routes = ADV748X_AFE_ROUTES_MAX;
+ return -ENOSPC;
+ }
+
+ routing->num_routes = ADV748X_AFE_ROUTES_MAX;
+
+ for (i = ADV748X_AFE_SINK_AIN0; i <= ADV748X_AFE_SINK_AIN7; i++) {
+ r->sink_pad = i;
+ r->sink_stream = 0;
+ r->source_pad = ADV748X_AFE_SOURCE;
+ r->source_stream = 0;
+ r->flags = afe->input == i ? V4L2_SUBDEV_ROUTE_FL_ACTIVE : 0;
+ r++;
+ }
+
+ return 0;
+}
+
+static int adv748x_afe_set_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_routing *routing)
+{
+ struct adv748x_afe *afe = adv748x_sd_to_afe(sd);
+ struct v4l2_subdev_route *r = routing->routes;
+ int input = -1;
+ unsigned int i;
+
+ if (routing->num_routes > ADV748X_AFE_ROUTES_MAX)
+ return -ENOSPC;
+
+ for (i = 0; i < routing->num_routes; i++) {
+ if (r->sink_pad > ADV748X_AFE_SINK_AIN7 ||
+ r->sink_stream != 0 ||
+ r->source_pad != ADV748X_AFE_SOURCE ||
+ r->source_stream != 0)
+ return -EINVAL;
+
+ if (r->flags & V4L2_SUBDEV_ROUTE_FL_ACTIVE) {
+ if (input != -1)
+ return -EMLINK;
+
+ input = r->sink_pad;
+ }
+ r++;
+ }
+
+ if (input != -1)
+ afe->input = input;
+
+ return 0;
+}
+
static const struct v4l2_subdev_pad_ops adv748x_afe_pad_ops = {
.enum_mbus_code = adv748x_afe_enum_mbus_code,
.set_fmt = adv748x_afe_set_format,
.get_fmt = adv748x_afe_get_format,
+ .get_routing = adv748x_afe_get_routing,
+ .set_routing = adv748x_afe_set_routing,
};
/* -----------------------------------------------------------------------------
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* [PATCH 29/30] rcar-csi2: use frame description information to configure CSI-2 bus
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (27 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 28/30] adv748x: afe: add routing support Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-09-24 14:39 ` Kieran Bingham
2018-08-23 13:25 ` [PATCH 30/30] rcar-csi2: expose the subdevice internal routing Niklas Söderlund
2018-08-27 11:50 ` Sakari Ailus
30 siblings, 1 reply; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Niklas Söderlund
The driver can now access frame descriptor information, use it when
configuring the CSI-2 bus. Only enable the virtual channels which are
described in the frame descriptor and calculate the link based on all
enabled streams.
With multiplexed stream supported it's now meaningful to have different
formats on the different source pads. Make source formats independent
off each other and disallowing a format on the multiplexed sink pad.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 135 ++++++++++++++------
1 file changed, 98 insertions(+), 37 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index dc5ae8025832ab6e..467722007b328e4e 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -304,25 +304,22 @@ static const struct rcsi2_mbps_reg hsfreqrange_m3w_h3es1[] = {
#define CSI0CLKFREQRANGE(n) ((n & 0x3f) << 16)
struct rcar_csi2_format {
- u32 code;
unsigned int datatype;
unsigned int bpp;
};
static const struct rcar_csi2_format rcar_csi2_formats[] = {
- { .code = MEDIA_BUS_FMT_RGB888_1X24, .datatype = 0x24, .bpp = 24 },
- { .code = MEDIA_BUS_FMT_UYVY8_1X16, .datatype = 0x1e, .bpp = 16 },
- { .code = MEDIA_BUS_FMT_YUYV8_1X16, .datatype = 0x1e, .bpp = 16 },
- { .code = MEDIA_BUS_FMT_UYVY8_2X8, .datatype = 0x1e, .bpp = 16 },
- { .code = MEDIA_BUS_FMT_YUYV10_2X10, .datatype = 0x1e, .bpp = 20 },
+ { .datatype = 0x1e, .bpp = 16 },
+ { .datatype = 0x24, .bpp = 24 },
};
-static const struct rcar_csi2_format *rcsi2_code_to_fmt(unsigned int code)
+static const struct rcar_csi2_format
+*rcsi2_datatype_to_fmt(unsigned int datatype)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(rcar_csi2_formats); i++)
- if (rcar_csi2_formats[i].code == code)
+ if (rcar_csi2_formats[i].datatype == datatype)
return &rcar_csi2_formats[i];
return NULL;
@@ -337,6 +334,14 @@ enum rcar_csi2_pads {
NR_OF_RCAR_CSI2_PAD,
};
+static int rcsi2_pad_to_vc(unsigned int pad)
+{
+ if (pad < RCAR_CSI2_SOURCE_VC0 || pad > RCAR_CSI2_SOURCE_VC3)
+ return -EINVAL;
+
+ return pad - RCAR_CSI2_SOURCE_VC0;
+}
+
struct rcar_csi2_info {
int (*init_phtw)(struct rcar_csi2 *priv, unsigned int mbps);
int (*confirm_start)(struct rcar_csi2 *priv);
@@ -357,7 +362,7 @@ struct rcar_csi2 {
struct v4l2_async_subdev asd;
struct v4l2_subdev *remote;
- struct v4l2_mbus_framefmt mf;
+ struct v4l2_mbus_framefmt mf[4];
struct mutex lock;
int stream_count;
@@ -393,6 +398,32 @@ static void rcsi2_reset(struct rcar_csi2 *priv)
rcsi2_write(priv, SRST_REG, 0);
}
+static int rcsi2_get_remote_frame_desc(struct rcar_csi2 *priv,
+ struct v4l2_mbus_frame_desc *fd)
+{
+ struct media_pad *pad;
+ int ret;
+
+ if (!priv->remote)
+ return -ENODEV;
+
+ pad = media_entity_remote_pad(&priv->pads[RCAR_CSI2_SINK]);
+ if (!pad)
+ return -ENODEV;
+
+ ret = v4l2_subdev_call(priv->remote, pad, get_frame_desc,
+ pad->index, fd);
+ if (ret)
+ return -ENODEV;
+
+ if (fd->type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) {
+ dev_err(priv->dev, "Frame desc do not describe CSI-2 link");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int rcsi2_wait_phy_start(struct rcar_csi2 *priv)
{
unsigned int timeout;
@@ -431,10 +462,12 @@ static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
return 0;
}
-static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
+static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
+ struct v4l2_mbus_frame_desc *fd)
{
struct v4l2_subdev *source;
struct v4l2_ctrl *ctrl;
+ unsigned int i, bpp = 0;
u64 mbps;
if (!priv->remote)
@@ -450,6 +483,21 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
return -EINVAL;
}
+ /* Calculate total bpp */
+ for (i = 0; i < fd->num_entries; i++) {
+ const struct rcar_csi2_format *format;
+
+ format = rcsi2_datatype_to_fmt(
+ fd->entry[i].bus.csi2.data_type);
+ if (!format) {
+ dev_err(priv->dev, "Unknown data type: %d\n",
+ fd->entry[i].bus.csi2.data_type);
+ return -EINVAL;
+ }
+
+ bpp += format->bpp;
+ }
+
/*
* Calculate the phypll in mbps.
* link_freq = (pixel_rate * bits_per_sample) / (2 * nr_of_lanes)
@@ -463,42 +511,40 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
static int rcsi2_start(struct rcar_csi2 *priv)
{
- const struct rcar_csi2_format *format;
+ struct v4l2_mbus_frame_desc fd;
u32 phycnt, vcdt = 0, vcdt2 = 0;
unsigned int i;
int mbps, ret;
- dev_dbg(priv->dev, "Input size (%ux%u%c)\n",
- priv->mf.width, priv->mf.height,
- priv->mf.field == V4L2_FIELD_NONE ? 'p' : 'i');
-
- /* Code is validated in set_fmt. */
- format = rcsi2_code_to_fmt(priv->mf.code);
+ /* Get information about multiplexed link. */
+ ret = rcsi2_get_remote_frame_desc(priv, &fd);
+ if (ret)
+ return ret;
- /*
- * Enable all Virtual Channels.
- *
- * NOTE: It's not possible to get individual datatype for each
- * source virtual channel. Once this is possible in V4L2
- * it should be used here.
- */
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < fd.num_entries; i++) {
+ struct v4l2_mbus_frame_desc_entry *entry = &fd.entry[i];
u32 vcdt_part;
- vcdt_part = VCDT_SEL_VC(i) | VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
- VCDT_SEL_DT(format->datatype);
+ vcdt_part = VCDT_SEL_VC(entry->bus.csi2.channel) |
+ VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
+ VCDT_SEL_DT(entry->bus.csi2.data_type);
/* Store in correct reg and offset. */
- if (i < 2)
- vcdt |= vcdt_part << ((i % 2) * 16);
+ if (entry->bus.csi2.channel < 2)
+ vcdt |= vcdt_part <<
+ ((entry->bus.csi2.channel % 2) * 16);
else
- vcdt2 |= vcdt_part << ((i % 2) * 16);
+ vcdt2 |= vcdt_part <<
+ ((entry->bus.csi2.channel % 2) * 16);
+
+ dev_dbg(priv->dev, "VC%d datatype: 0x%x\n",
+ entry->bus.csi2.channel, entry->bus.csi2.data_type);
}
phycnt = PHYCNT_ENABLECLK;
phycnt |= (1 << priv->lanes) - 1;
- mbps = rcsi2_calc_mbps(priv, format->bpp);
+ mbps = rcsi2_calc_mbps(priv, &fd);
if (mbps < 0)
return mbps;
@@ -619,14 +665,16 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
{
struct rcar_csi2 *priv = sd_to_csi2(sd);
struct v4l2_mbus_framefmt *framefmt;
+ int vc;
- if (!rcsi2_code_to_fmt(format->format.code))
- format->format.code = rcar_csi2_formats[0].code;
+ vc = rcsi2_pad_to_vc(format->pad);
+ if (vc < 0)
+ return vc;
if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
- priv->mf = format->format;
+ priv->mf[vc] = format->format;
} else {
- framefmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+ framefmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
*framefmt = format->format;
}
@@ -638,11 +686,17 @@ static int rcsi2_get_pad_format(struct v4l2_subdev *sd,
struct v4l2_subdev_format *format)
{
struct rcar_csi2 *priv = sd_to_csi2(sd);
+ int vc;
+
+ vc = rcsi2_pad_to_vc(format->pad);
+ if (vc < 0)
+ return vc;
if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
- format->format = priv->mf;
+ format->format = priv->mf[vc];
else
- format->format = *v4l2_subdev_get_try_format(sd, cfg, 0);
+ format->format = *v4l2_subdev_get_try_format(sd, cfg,
+ format->pad);
return 0;
}
@@ -672,6 +726,13 @@ static int rcsi2_notify_bound(struct v4l2_async_notifier *notifier,
struct rcar_csi2 *priv = notifier_to_csi2(notifier);
int pad;
+ if (!v4l2_subdev_has_op(subdev, pad, get_frame_desc)) {
+ dev_err(priv->dev,
+ "Failed as '%s' do not support frame descriptors\n",
+ subdev->name);
+ return -EINVAL;
+ }
+
pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
MEDIA_PAD_FL_SOURCE);
if (pad < 0) {
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH 29/30] rcar-csi2: use frame description information to configure CSI-2 bus
2018-08-23 13:25 ` [PATCH 29/30] rcar-csi2: use frame description information to configure CSI-2 bus Niklas Söderlund
@ 2018-09-24 14:39 ` Kieran Bingham
2018-09-26 14:23 ` Niklas Söderlund
0 siblings, 1 reply; 47+ messages in thread
From: Kieran Bingham @ 2018-09-24 14:39 UTC (permalink / raw)
To: Niklas Söderlund, Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc
Hi Niklas,
On 23/08/18 14:25, Niklas Söderlund wrote:
> The driver can now access frame descriptor information, use it when
> configuring the CSI-2 bus. Only enable the virtual channels which are
> described in the frame descriptor and calculate the link based on all
> enabled streams.
>
> With multiplexed stream supported it's now meaningful to have different
> formats on the different source pads. Make source formats independent
> off each other and disallowing a format on the multiplexed sink pad.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> drivers/media/platform/rcar-vin/rcar-csi2.c | 135 ++++++++++++++------
> 1 file changed, 98 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> index dc5ae8025832ab6e..467722007b328e4e 100644
> --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> @@ -304,25 +304,22 @@ static const struct rcsi2_mbps_reg hsfreqrange_m3w_h3es1[] = {
> #define CSI0CLKFREQRANGE(n) ((n & 0x3f) << 16)
>
> struct rcar_csi2_format {
> - u32 code;
> unsigned int datatype;
> unsigned int bpp;
> };
>
> static const struct rcar_csi2_format rcar_csi2_formats[] = {
> - { .code = MEDIA_BUS_FMT_RGB888_1X24, .datatype = 0x24, .bpp = 24 },
> - { .code = MEDIA_BUS_FMT_UYVY8_1X16, .datatype = 0x1e, .bpp = 16 },
> - { .code = MEDIA_BUS_FMT_YUYV8_1X16, .datatype = 0x1e, .bpp = 16 },
> - { .code = MEDIA_BUS_FMT_UYVY8_2X8, .datatype = 0x1e, .bpp = 16 },
> - { .code = MEDIA_BUS_FMT_YUYV10_2X10, .datatype = 0x1e, .bpp = 20 },
> + { .datatype = 0x1e, .bpp = 16 },
> + { .datatype = 0x24, .bpp = 24 },
We're transforming this table with 3 values for .bpp {24, 20, and 16}
into a table with only 2. {16, 24}.
MEDIA_BUS_FMT_YUYV10_2X10 will now be truncated into a 16 bpp format. Is
that valid in this use case?
> };
>
> -static const struct rcar_csi2_format *rcsi2_code_to_fmt(unsigned int code)
> +static const struct rcar_csi2_format
> +*rcsi2_datatype_to_fmt(unsigned int datatype)
> {
> unsigned int i;
>
> for (i = 0; i < ARRAY_SIZE(rcar_csi2_formats); i++)
> - if (rcar_csi2_formats[i].code == code)
> + if (rcar_csi2_formats[i].datatype == datatype)
> return &rcar_csi2_formats[i];
>
> return NULL;
> @@ -337,6 +334,14 @@ enum rcar_csi2_pads {
> NR_OF_RCAR_CSI2_PAD,
> };
>
> +static int rcsi2_pad_to_vc(unsigned int pad)
> +{
> + if (pad < RCAR_CSI2_SOURCE_VC0 || pad > RCAR_CSI2_SOURCE_VC3)
> + return -EINVAL;
> +
> + return pad - RCAR_CSI2_SOURCE_VC0;
> +}
> +
> struct rcar_csi2_info {
> int (*init_phtw)(struct rcar_csi2 *priv, unsigned int mbps);
> int (*confirm_start)(struct rcar_csi2 *priv);
> @@ -357,7 +362,7 @@ struct rcar_csi2 {
> struct v4l2_async_subdev asd;
> struct v4l2_subdev *remote;
>
> - struct v4l2_mbus_framefmt mf;
> + struct v4l2_mbus_framefmt mf[4];
>
> struct mutex lock;
> int stream_count;
> @@ -393,6 +398,32 @@ static void rcsi2_reset(struct rcar_csi2 *priv)
> rcsi2_write(priv, SRST_REG, 0);
> }
>
> +static int rcsi2_get_remote_frame_desc(struct rcar_csi2 *priv,
> + struct v4l2_mbus_frame_desc *fd)
> +{
> + struct media_pad *pad;
> + int ret;
> +
> + if (!priv->remote)
> + return -ENODEV;
> +
> + pad = media_entity_remote_pad(&priv->pads[RCAR_CSI2_SINK]);
> + if (!pad)
> + return -ENODEV;
> +
> + ret = v4l2_subdev_call(priv->remote, pad, get_frame_desc,
> + pad->index, fd);
> + if (ret)
> + return -ENODEV;
> +
> + if (fd->type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) {
> + dev_err(priv->dev, "Frame desc do not describe CSI-2 link");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static int rcsi2_wait_phy_start(struct rcar_csi2 *priv)
> {
> unsigned int timeout;
> @@ -431,10 +462,12 @@ static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
> return 0;
> }
>
> -static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
> +static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
> + struct v4l2_mbus_frame_desc *fd)
> {
> struct v4l2_subdev *source;
> struct v4l2_ctrl *ctrl;
> + unsigned int i, bpp = 0;
> u64 mbps;
>
> if (!priv->remote)
> @@ -450,6 +483,21 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
> return -EINVAL;
> }
>
> + /* Calculate total bpp */
> + for (i = 0; i < fd->num_entries; i++) {
> + const struct rcar_csi2_format *format;
> +
> + format = rcsi2_datatype_to_fmt(
> + fd->entry[i].bus.csi2.data_type);
> + if (!format) {
> + dev_err(priv->dev, "Unknown data type: %d\n",
> + fd->entry[i].bus.csi2.data_type);
> + return -EINVAL;
> + }
> +
> + bpp += format->bpp;
> + }
> +
> /*
> * Calculate the phypll in mbps.
> * link_freq = (pixel_rate * bits_per_sample) / (2 * nr_of_lanes)
> @@ -463,42 +511,40 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
>
> static int rcsi2_start(struct rcar_csi2 *priv)
> {
> - const struct rcar_csi2_format *format;
> + struct v4l2_mbus_frame_desc fd;
> u32 phycnt, vcdt = 0, vcdt2 = 0;
> unsigned int i;
> int mbps, ret;
>
> - dev_dbg(priv->dev, "Input size (%ux%u%c)\n",
> - priv->mf.width, priv->mf.height,
> - priv->mf.field == V4L2_FIELD_NONE ? 'p' : 'i');
> -
> - /* Code is validated in set_fmt. */
> - format = rcsi2_code_to_fmt(priv->mf.code);
> + /* Get information about multiplexed link. */
> + ret = rcsi2_get_remote_frame_desc(priv, &fd);
> + if (ret)
> + return ret;
>
> - /*
> - * Enable all Virtual Channels.
> - *
> - * NOTE: It's not possible to get individual datatype for each
> - * source virtual channel. Once this is possible in V4L2
> - * it should be used here.
> - */
> - for (i = 0; i < 4; i++) {
> + for (i = 0; i < fd.num_entries; i++) {
> + struct v4l2_mbus_frame_desc_entry *entry = &fd.entry[i];
> u32 vcdt_part;
>
> - vcdt_part = VCDT_SEL_VC(i) | VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
> - VCDT_SEL_DT(format->datatype);
> + vcdt_part = VCDT_SEL_VC(entry->bus.csi2.channel) |
> + VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
> + VCDT_SEL_DT(entry->bus.csi2.data_type);
>
> /* Store in correct reg and offset. */
> - if (i < 2)
> - vcdt |= vcdt_part << ((i % 2) * 16);
> + if (entry->bus.csi2.channel < 2)
> + vcdt |= vcdt_part <<
> + ((entry->bus.csi2.channel % 2) * 16);
> else
> - vcdt2 |= vcdt_part << ((i % 2) * 16);
> + vcdt2 |= vcdt_part <<
> + ((entry->bus.csi2.channel % 2) * 16);
> +
> + dev_dbg(priv->dev, "VC%d datatype: 0x%x\n",
> + entry->bus.csi2.channel, entry->bus.csi2.data_type);
> }
>
> phycnt = PHYCNT_ENABLECLK;
> phycnt |= (1 << priv->lanes) - 1;
>
> - mbps = rcsi2_calc_mbps(priv, format->bpp);
> + mbps = rcsi2_calc_mbps(priv, &fd);
> if (mbps < 0)
> return mbps;
>
> @@ -619,14 +665,16 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
> {
> struct rcar_csi2 *priv = sd_to_csi2(sd);
> struct v4l2_mbus_framefmt *framefmt;
> + int vc;
>
> - if (!rcsi2_code_to_fmt(format->format.code))
> - format->format.code = rcar_csi2_formats[0].code;
> + vc = rcsi2_pad_to_vc(format->pad);
> + if (vc < 0)
> + return vc;
>
> if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> - priv->mf = format->format;
> + priv->mf[vc] = format->format;
> } else {
> - framefmt = v4l2_subdev_get_try_format(sd, cfg, 0);
> + framefmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
> *framefmt = format->format;
> }
>
> @@ -638,11 +686,17 @@ static int rcsi2_get_pad_format(struct v4l2_subdev *sd,
> struct v4l2_subdev_format *format)
> {
> struct rcar_csi2 *priv = sd_to_csi2(sd);
> + int vc;
> +
> + vc = rcsi2_pad_to_vc(format->pad);
> + if (vc < 0)
> + return vc;
>
> if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> - format->format = priv->mf;
> + format->format = priv->mf[vc];
> else
> - format->format = *v4l2_subdev_get_try_format(sd, cfg, 0);
> + format->format = *v4l2_subdev_get_try_format(sd, cfg,
> + format->pad);
>
> return 0;
> }
> @@ -672,6 +726,13 @@ static int rcsi2_notify_bound(struct v4l2_async_notifier *notifier,
> struct rcar_csi2 *priv = notifier_to_csi2(notifier);
> int pad;
>
> + if (!v4l2_subdev_has_op(subdev, pad, get_frame_desc)) {
> + dev_err(priv->dev,
> + "Failed as '%s' do not support frame descriptors\n",
> + subdev->name);
> + return -EINVAL;
> + }
> +
> pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> MEDIA_PAD_FL_SOURCE);
> if (pad < 0) {
>
--
Regards
--
Kieran
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH 29/30] rcar-csi2: use frame description information to configure CSI-2 bus
2018-09-24 14:39 ` Kieran Bingham
@ 2018-09-26 14:23 ` Niklas Söderlund
0 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-09-26 14:23 UTC (permalink / raw)
To: Kieran Bingham
Cc: Laurent Pinchart, Sakari Ailus, linux-media, linux-renesas-soc
Hi Kieran,
Thanks for your comment.
On 2018-09-24 15:39:15 +0100, Kieran Bingham wrote:
> Hi Niklas,
>
> On 23/08/18 14:25, Niklas Söderlund wrote:
> > The driver can now access frame descriptor information, use it when
> > configuring the CSI-2 bus. Only enable the virtual channels which are
> > described in the frame descriptor and calculate the link based on all
> > enabled streams.
> >
> > With multiplexed stream supported it's now meaningful to have different
> > formats on the different source pads. Make source formats independent
> > off each other and disallowing a format on the multiplexed sink pad.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > ---
> > drivers/media/platform/rcar-vin/rcar-csi2.c | 135 ++++++++++++++------
> > 1 file changed, 98 insertions(+), 37 deletions(-)
> >
> > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > index dc5ae8025832ab6e..467722007b328e4e 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > @@ -304,25 +304,22 @@ static const struct rcsi2_mbps_reg hsfreqrange_m3w_h3es1[] = {
> > #define CSI0CLKFREQRANGE(n) ((n & 0x3f) << 16)
> >
> > struct rcar_csi2_format {
> > - u32 code;
> > unsigned int datatype;
> > unsigned int bpp;
> > };
> >
> > static const struct rcar_csi2_format rcar_csi2_formats[] = {
> > - { .code = MEDIA_BUS_FMT_RGB888_1X24, .datatype = 0x24, .bpp = 24 },
> > - { .code = MEDIA_BUS_FMT_UYVY8_1X16, .datatype = 0x1e, .bpp = 16 },
> > - { .code = MEDIA_BUS_FMT_YUYV8_1X16, .datatype = 0x1e, .bpp = 16 },
> > - { .code = MEDIA_BUS_FMT_UYVY8_2X8, .datatype = 0x1e, .bpp = 16 },
> > - { .code = MEDIA_BUS_FMT_YUYV10_2X10, .datatype = 0x1e, .bpp = 20 },
> > + { .datatype = 0x1e, .bpp = 16 },
> > + { .datatype = 0x24, .bpp = 24 },
>
> We're transforming this table with 3 values for .bpp {24, 20, and 16}
> into a table with only 2. {16, 24}.
>
> MEDIA_BUS_FMT_YUYV10_2X10 will now be truncated into a 16 bpp format. Is
> that valid in this use case?
What I do in this patch is that the driver no longer looks at the code
set by the user instead it depends on the CSI-2 datatype set by the
CSI-2 transmitter.
I would not say this is equivalent to MEDIA_BUS_FMT_YUYV10_2X10 being
truncated as much as we due to a lack of useres (and the ability to test
it) drop support for it. If we find a video source which transmits using
a 20 bpp format we would need to extend this table with the appropriate
CSI-2 datatype and bpp.
It's been a while since I wrote this code so my memory might be a bit
fuzzy bit I think at the time I made a mental note that this is
something that one day could be moved to the framework level. That is
map a to/from a CSI-2 datatype and its properties such as bpp.
>
>
> > };
> >
> > -static const struct rcar_csi2_format *rcsi2_code_to_fmt(unsigned int code)
> > +static const struct rcar_csi2_format
> > +*rcsi2_datatype_to_fmt(unsigned int datatype)
> > {
> > unsigned int i;
> >
> > for (i = 0; i < ARRAY_SIZE(rcar_csi2_formats); i++)
> > - if (rcar_csi2_formats[i].code == code)
> > + if (rcar_csi2_formats[i].datatype == datatype)
> > return &rcar_csi2_formats[i];
> >
> > return NULL;
> > @@ -337,6 +334,14 @@ enum rcar_csi2_pads {
> > NR_OF_RCAR_CSI2_PAD,
> > };
> >
> > +static int rcsi2_pad_to_vc(unsigned int pad)
> > +{
> > + if (pad < RCAR_CSI2_SOURCE_VC0 || pad > RCAR_CSI2_SOURCE_VC3)
> > + return -EINVAL;
> > +
> > + return pad - RCAR_CSI2_SOURCE_VC0;
> > +}
> > +
> > struct rcar_csi2_info {
> > int (*init_phtw)(struct rcar_csi2 *priv, unsigned int mbps);
> > int (*confirm_start)(struct rcar_csi2 *priv);
> > @@ -357,7 +362,7 @@ struct rcar_csi2 {
> > struct v4l2_async_subdev asd;
> > struct v4l2_subdev *remote;
> >
> > - struct v4l2_mbus_framefmt mf;
> > + struct v4l2_mbus_framefmt mf[4];
> >
> > struct mutex lock;
> > int stream_count;
> > @@ -393,6 +398,32 @@ static void rcsi2_reset(struct rcar_csi2 *priv)
> > rcsi2_write(priv, SRST_REG, 0);
> > }
> >
> > +static int rcsi2_get_remote_frame_desc(struct rcar_csi2 *priv,
> > + struct v4l2_mbus_frame_desc *fd)
> > +{
> > + struct media_pad *pad;
> > + int ret;
> > +
> > + if (!priv->remote)
> > + return -ENODEV;
> > +
> > + pad = media_entity_remote_pad(&priv->pads[RCAR_CSI2_SINK]);
> > + if (!pad)
> > + return -ENODEV;
> > +
> > + ret = v4l2_subdev_call(priv->remote, pad, get_frame_desc,
> > + pad->index, fd);
> > + if (ret)
> > + return -ENODEV;
> > +
> > + if (fd->type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) {
> > + dev_err(priv->dev, "Frame desc do not describe CSI-2 link");
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int rcsi2_wait_phy_start(struct rcar_csi2 *priv)
> > {
> > unsigned int timeout;
> > @@ -431,10 +462,12 @@ static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
> > return 0;
> > }
> >
> > -static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
> > +static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
> > + struct v4l2_mbus_frame_desc *fd)
> > {
> > struct v4l2_subdev *source;
> > struct v4l2_ctrl *ctrl;
> > + unsigned int i, bpp = 0;
> > u64 mbps;
> >
> > if (!priv->remote)
> > @@ -450,6 +483,21 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
> > return -EINVAL;
> > }
> >
> > + /* Calculate total bpp */
> > + for (i = 0; i < fd->num_entries; i++) {
> > + const struct rcar_csi2_format *format;
> > +
> > + format = rcsi2_datatype_to_fmt(
> > + fd->entry[i].bus.csi2.data_type);
> > + if (!format) {
> > + dev_err(priv->dev, "Unknown data type: %d\n",
> > + fd->entry[i].bus.csi2.data_type);
> > + return -EINVAL;
> > + }
> > +
> > + bpp += format->bpp;
> > + }
> > +
> > /*
> > * Calculate the phypll in mbps.
> > * link_freq = (pixel_rate * bits_per_sample) / (2 * nr_of_lanes)
> > @@ -463,42 +511,40 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
> >
> > static int rcsi2_start(struct rcar_csi2 *priv)
> > {
> > - const struct rcar_csi2_format *format;
> > + struct v4l2_mbus_frame_desc fd;
> > u32 phycnt, vcdt = 0, vcdt2 = 0;
> > unsigned int i;
> > int mbps, ret;
> >
> > - dev_dbg(priv->dev, "Input size (%ux%u%c)\n",
> > - priv->mf.width, priv->mf.height,
> > - priv->mf.field == V4L2_FIELD_NONE ? 'p' : 'i');
> > -
> > - /* Code is validated in set_fmt. */
> > - format = rcsi2_code_to_fmt(priv->mf.code);
> > + /* Get information about multiplexed link. */
> > + ret = rcsi2_get_remote_frame_desc(priv, &fd);
> > + if (ret)
> > + return ret;
> >
> > - /*
> > - * Enable all Virtual Channels.
> > - *
> > - * NOTE: It's not possible to get individual datatype for each
> > - * source virtual channel. Once this is possible in V4L2
> > - * it should be used here.
> > - */
> > - for (i = 0; i < 4; i++) {
> > + for (i = 0; i < fd.num_entries; i++) {
> > + struct v4l2_mbus_frame_desc_entry *entry = &fd.entry[i];
> > u32 vcdt_part;
> >
> > - vcdt_part = VCDT_SEL_VC(i) | VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
> > - VCDT_SEL_DT(format->datatype);
> > + vcdt_part = VCDT_SEL_VC(entry->bus.csi2.channel) |
> > + VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
> > + VCDT_SEL_DT(entry->bus.csi2.data_type);
> >
> > /* Store in correct reg and offset. */
> > - if (i < 2)
> > - vcdt |= vcdt_part << ((i % 2) * 16);
> > + if (entry->bus.csi2.channel < 2)
> > + vcdt |= vcdt_part <<
> > + ((entry->bus.csi2.channel % 2) * 16);
> > else
> > - vcdt2 |= vcdt_part << ((i % 2) * 16);
> > + vcdt2 |= vcdt_part <<
> > + ((entry->bus.csi2.channel % 2) * 16);
> > +
> > + dev_dbg(priv->dev, "VC%d datatype: 0x%x\n",
> > + entry->bus.csi2.channel, entry->bus.csi2.data_type);
> > }
> >
> > phycnt = PHYCNT_ENABLECLK;
> > phycnt |= (1 << priv->lanes) - 1;
> >
> > - mbps = rcsi2_calc_mbps(priv, format->bpp);
> > + mbps = rcsi2_calc_mbps(priv, &fd);
> > if (mbps < 0)
> > return mbps;
> >
> > @@ -619,14 +665,16 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
> > {
> > struct rcar_csi2 *priv = sd_to_csi2(sd);
> > struct v4l2_mbus_framefmt *framefmt;
> > + int vc;
> >
> > - if (!rcsi2_code_to_fmt(format->format.code))
> > - format->format.code = rcar_csi2_formats[0].code;
> > + vc = rcsi2_pad_to_vc(format->pad);
> > + if (vc < 0)
> > + return vc;
> >
> > if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > - priv->mf = format->format;
> > + priv->mf[vc] = format->format;
> > } else {
> > - framefmt = v4l2_subdev_get_try_format(sd, cfg, 0);
> > + framefmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
> > *framefmt = format->format;
> > }
> >
> > @@ -638,11 +686,17 @@ static int rcsi2_get_pad_format(struct v4l2_subdev *sd,
> > struct v4l2_subdev_format *format)
> > {
> > struct rcar_csi2 *priv = sd_to_csi2(sd);
> > + int vc;
> > +
> > + vc = rcsi2_pad_to_vc(format->pad);
> > + if (vc < 0)
> > + return vc;
> >
> > if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> > - format->format = priv->mf;
> > + format->format = priv->mf[vc];
> > else
> > - format->format = *v4l2_subdev_get_try_format(sd, cfg, 0);
> > + format->format = *v4l2_subdev_get_try_format(sd, cfg,
> > + format->pad);
> >
> > return 0;
> > }
> > @@ -672,6 +726,13 @@ static int rcsi2_notify_bound(struct v4l2_async_notifier *notifier,
> > struct rcar_csi2 *priv = notifier_to_csi2(notifier);
> > int pad;
> >
> > + if (!v4l2_subdev_has_op(subdev, pad, get_frame_desc)) {
> > + dev_err(priv->dev,
> > + "Failed as '%s' do not support frame descriptors\n",
> > + subdev->name);
> > + return -EINVAL;
> > + }
> > +
> > pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> > MEDIA_PAD_FL_SOURCE);
> > if (pad < 0) {
> >
>
> --
> Regards
> --
> Kieran
--
Regards,
Niklas Söderlund
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH 29/30] rcar-csi2: use frame description information to configure CSI-2 bus
@ 2018-09-26 14:23 ` Niklas Söderlund
0 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-09-26 14:23 UTC (permalink / raw)
To: Kieran Bingham
Cc: Laurent Pinchart, Sakari Ailus, linux-media, linux-renesas-soc
Hi Kieran,
Thanks for your comment.
On 2018-09-24 15:39:15 +0100, Kieran Bingham wrote:
> Hi Niklas,
>
> On 23/08/18 14:25, Niklas S�derlund wrote:
> > The driver can now access frame descriptor information, use it when
> > configuring the CSI-2 bus. Only enable the virtual channels which are
> > described in the frame descriptor and calculate the link based on all
> > enabled streams.
> >
> > With multiplexed stream supported it's now meaningful to have different
> > formats on the different source pads. Make source formats independent
> > off each other and disallowing a format on the multiplexed sink pad.
> >
> > Signed-off-by: Niklas S�derlund <niklas.soderlund+renesas@ragnatech.se>
> > ---
> > drivers/media/platform/rcar-vin/rcar-csi2.c | 135 ++++++++++++++------
> > 1 file changed, 98 insertions(+), 37 deletions(-)
> >
> > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > index dc5ae8025832ab6e..467722007b328e4e 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > @@ -304,25 +304,22 @@ static const struct rcsi2_mbps_reg hsfreqrange_m3w_h3es1[] = {
> > #define CSI0CLKFREQRANGE(n) ((n & 0x3f) << 16)
> >
> > struct rcar_csi2_format {
> > - u32 code;
> > unsigned int datatype;
> > unsigned int bpp;
> > };
> >
> > static const struct rcar_csi2_format rcar_csi2_formats[] = {
> > - { .code = MEDIA_BUS_FMT_RGB888_1X24, .datatype = 0x24, .bpp = 24 },
> > - { .code = MEDIA_BUS_FMT_UYVY8_1X16, .datatype = 0x1e, .bpp = 16 },
> > - { .code = MEDIA_BUS_FMT_YUYV8_1X16, .datatype = 0x1e, .bpp = 16 },
> > - { .code = MEDIA_BUS_FMT_UYVY8_2X8, .datatype = 0x1e, .bpp = 16 },
> > - { .code = MEDIA_BUS_FMT_YUYV10_2X10, .datatype = 0x1e, .bpp = 20 },
> > + { .datatype = 0x1e, .bpp = 16 },
> > + { .datatype = 0x24, .bpp = 24 },
>
> We're transforming this table with 3 values for .bpp {24, 20, and 16}
> into a table with only 2. {16, 24}.
>
> MEDIA_BUS_FMT_YUYV10_2X10 will now be truncated into a 16 bpp format. Is
> that valid in this use case?
What I do in this patch is that the driver no longer looks at the code
set by the user instead it depends on the CSI-2 datatype set by the
CSI-2 transmitter.
I would not say this is equivalent to MEDIA_BUS_FMT_YUYV10_2X10 being
truncated as much as we due to a lack of useres (and the ability to test
it) drop support for it. If we find a video source which transmits using
a 20 bpp format we would need to extend this table with the appropriate
CSI-2 datatype and bpp.
It's been a while since I wrote this code so my memory might be a bit
fuzzy bit I think at the time I made a mental note that this is
something that one day could be moved to the framework level. That is
map a to/from a CSI-2 datatype and its properties such as bpp.
>
>
> > };
> >
> > -static const struct rcar_csi2_format *rcsi2_code_to_fmt(unsigned int code)
> > +static const struct rcar_csi2_format
> > +*rcsi2_datatype_to_fmt(unsigned int datatype)
> > {
> > unsigned int i;
> >
> > for (i = 0; i < ARRAY_SIZE(rcar_csi2_formats); i++)
> > - if (rcar_csi2_formats[i].code == code)
> > + if (rcar_csi2_formats[i].datatype == datatype)
> > return &rcar_csi2_formats[i];
> >
> > return NULL;
> > @@ -337,6 +334,14 @@ enum rcar_csi2_pads {
> > NR_OF_RCAR_CSI2_PAD,
> > };
> >
> > +static int rcsi2_pad_to_vc(unsigned int pad)
> > +{
> > + if (pad < RCAR_CSI2_SOURCE_VC0 || pad > RCAR_CSI2_SOURCE_VC3)
> > + return -EINVAL;
> > +
> > + return pad - RCAR_CSI2_SOURCE_VC0;
> > +}
> > +
> > struct rcar_csi2_info {
> > int (*init_phtw)(struct rcar_csi2 *priv, unsigned int mbps);
> > int (*confirm_start)(struct rcar_csi2 *priv);
> > @@ -357,7 +362,7 @@ struct rcar_csi2 {
> > struct v4l2_async_subdev asd;
> > struct v4l2_subdev *remote;
> >
> > - struct v4l2_mbus_framefmt mf;
> > + struct v4l2_mbus_framefmt mf[4];
> >
> > struct mutex lock;
> > int stream_count;
> > @@ -393,6 +398,32 @@ static void rcsi2_reset(struct rcar_csi2 *priv)
> > rcsi2_write(priv, SRST_REG, 0);
> > }
> >
> > +static int rcsi2_get_remote_frame_desc(struct rcar_csi2 *priv,
> > + struct v4l2_mbus_frame_desc *fd)
> > +{
> > + struct media_pad *pad;
> > + int ret;
> > +
> > + if (!priv->remote)
> > + return -ENODEV;
> > +
> > + pad = media_entity_remote_pad(&priv->pads[RCAR_CSI2_SINK]);
> > + if (!pad)
> > + return -ENODEV;
> > +
> > + ret = v4l2_subdev_call(priv->remote, pad, get_frame_desc,
> > + pad->index, fd);
> > + if (ret)
> > + return -ENODEV;
> > +
> > + if (fd->type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) {
> > + dev_err(priv->dev, "Frame desc do not describe CSI-2 link");
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int rcsi2_wait_phy_start(struct rcar_csi2 *priv)
> > {
> > unsigned int timeout;
> > @@ -431,10 +462,12 @@ static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
> > return 0;
> > }
> >
> > -static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
> > +static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
> > + struct v4l2_mbus_frame_desc *fd)
> > {
> > struct v4l2_subdev *source;
> > struct v4l2_ctrl *ctrl;
> > + unsigned int i, bpp = 0;
> > u64 mbps;
> >
> > if (!priv->remote)
> > @@ -450,6 +483,21 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
> > return -EINVAL;
> > }
> >
> > + /* Calculate total bpp */
> > + for (i = 0; i < fd->num_entries; i++) {
> > + const struct rcar_csi2_format *format;
> > +
> > + format = rcsi2_datatype_to_fmt(
> > + fd->entry[i].bus.csi2.data_type);
> > + if (!format) {
> > + dev_err(priv->dev, "Unknown data type: %d\n",
> > + fd->entry[i].bus.csi2.data_type);
> > + return -EINVAL;
> > + }
> > +
> > + bpp += format->bpp;
> > + }
> > +
> > /*
> > * Calculate the phypll in mbps.
> > * link_freq = (pixel_rate * bits_per_sample) / (2 * nr_of_lanes)
> > @@ -463,42 +511,40 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
> >
> > static int rcsi2_start(struct rcar_csi2 *priv)
> > {
> > - const struct rcar_csi2_format *format;
> > + struct v4l2_mbus_frame_desc fd;
> > u32 phycnt, vcdt = 0, vcdt2 = 0;
> > unsigned int i;
> > int mbps, ret;
> >
> > - dev_dbg(priv->dev, "Input size (%ux%u%c)\n",
> > - priv->mf.width, priv->mf.height,
> > - priv->mf.field == V4L2_FIELD_NONE ? 'p' : 'i');
> > -
> > - /* Code is validated in set_fmt. */
> > - format = rcsi2_code_to_fmt(priv->mf.code);
> > + /* Get information about multiplexed link. */
> > + ret = rcsi2_get_remote_frame_desc(priv, &fd);
> > + if (ret)
> > + return ret;
> >
> > - /*
> > - * Enable all Virtual Channels.
> > - *
> > - * NOTE: It's not possible to get individual datatype for each
> > - * source virtual channel. Once this is possible in V4L2
> > - * it should be used here.
> > - */
> > - for (i = 0; i < 4; i++) {
> > + for (i = 0; i < fd.num_entries; i++) {
> > + struct v4l2_mbus_frame_desc_entry *entry = &fd.entry[i];
> > u32 vcdt_part;
> >
> > - vcdt_part = VCDT_SEL_VC(i) | VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
> > - VCDT_SEL_DT(format->datatype);
> > + vcdt_part = VCDT_SEL_VC(entry->bus.csi2.channel) |
> > + VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
> > + VCDT_SEL_DT(entry->bus.csi2.data_type);
> >
> > /* Store in correct reg and offset. */
> > - if (i < 2)
> > - vcdt |= vcdt_part << ((i % 2) * 16);
> > + if (entry->bus.csi2.channel < 2)
> > + vcdt |= vcdt_part <<
> > + ((entry->bus.csi2.channel % 2) * 16);
> > else
> > - vcdt2 |= vcdt_part << ((i % 2) * 16);
> > + vcdt2 |= vcdt_part <<
> > + ((entry->bus.csi2.channel % 2) * 16);
> > +
> > + dev_dbg(priv->dev, "VC%d datatype: 0x%x\n",
> > + entry->bus.csi2.channel, entry->bus.csi2.data_type);
> > }
> >
> > phycnt = PHYCNT_ENABLECLK;
> > phycnt |= (1 << priv->lanes) - 1;
> >
> > - mbps = rcsi2_calc_mbps(priv, format->bpp);
> > + mbps = rcsi2_calc_mbps(priv, &fd);
> > if (mbps < 0)
> > return mbps;
> >
> > @@ -619,14 +665,16 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
> > {
> > struct rcar_csi2 *priv = sd_to_csi2(sd);
> > struct v4l2_mbus_framefmt *framefmt;
> > + int vc;
> >
> > - if (!rcsi2_code_to_fmt(format->format.code))
> > - format->format.code = rcar_csi2_formats[0].code;
> > + vc = rcsi2_pad_to_vc(format->pad);
> > + if (vc < 0)
> > + return vc;
> >
> > if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > - priv->mf = format->format;
> > + priv->mf[vc] = format->format;
> > } else {
> > - framefmt = v4l2_subdev_get_try_format(sd, cfg, 0);
> > + framefmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
> > *framefmt = format->format;
> > }
> >
> > @@ -638,11 +686,17 @@ static int rcsi2_get_pad_format(struct v4l2_subdev *sd,
> > struct v4l2_subdev_format *format)
> > {
> > struct rcar_csi2 *priv = sd_to_csi2(sd);
> > + int vc;
> > +
> > + vc = rcsi2_pad_to_vc(format->pad);
> > + if (vc < 0)
> > + return vc;
> >
> > if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> > - format->format = priv->mf;
> > + format->format = priv->mf[vc];
> > else
> > - format->format = *v4l2_subdev_get_try_format(sd, cfg, 0);
> > + format->format = *v4l2_subdev_get_try_format(sd, cfg,
> > + format->pad);
> >
> > return 0;
> > }
> > @@ -672,6 +726,13 @@ static int rcsi2_notify_bound(struct v4l2_async_notifier *notifier,
> > struct rcar_csi2 *priv = notifier_to_csi2(notifier);
> > int pad;
> >
> > + if (!v4l2_subdev_has_op(subdev, pad, get_frame_desc)) {
> > + dev_err(priv->dev,
> > + "Failed as '%s' do not support frame descriptors\n",
> > + subdev->name);
> > + return -EINVAL;
> > + }
> > +
> > pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> > MEDIA_PAD_FL_SOURCE);
> > if (pad < 0) {
> >
>
> --
> Regards
> --
> Kieran
--
Regards,
Niklas S�derlund
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH 30/30] rcar-csi2: expose the subdevice internal routing
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
` (28 preceding siblings ...)
2018-08-23 13:25 ` [PATCH 29/30] rcar-csi2: use frame description information to configure CSI-2 bus Niklas Söderlund
@ 2018-08-23 13:25 ` Niklas Söderlund
2018-08-27 11:50 ` Sakari Ailus
30 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-23 13:25 UTC (permalink / raw)
To: Laurent Pinchart, Sakari Ailus, linux-media
Cc: linux-renesas-soc, Niklas Söderlund
Expose the subdevice internal routing from the single multiplexed sink
pad to its source pads by implementing .get_routing(). This information
is used to do link validation at stream start and allows user-space to
view the route configuration.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 53 +++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index 467722007b328e4e..1cd17f4091946cad 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -342,6 +342,14 @@ static int rcsi2_pad_to_vc(unsigned int pad)
return pad - RCAR_CSI2_SOURCE_VC0;
}
+static int rcsi2_vc_to_pad(unsigned int vc)
+{
+ if (vc > 3)
+ return -EINVAL;
+
+ return vc + RCAR_CSI2_SOURCE_VC0;
+}
+
struct rcar_csi2_info {
int (*init_phtw)(struct rcar_csi2 *priv, unsigned int mbps);
int (*confirm_start)(struct rcar_csi2 *priv);
@@ -705,9 +713,54 @@ static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = {
.s_stream = rcsi2_s_stream,
};
+static int rcsi2_get_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_routing *routing)
+{
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+ struct v4l2_mbus_frame_desc fd;
+ struct v4l2_subdev_route *r = routing->routes;
+ unsigned int i;
+ int ret;
+
+ /* Get information about multiplexed link */
+ ret = rcsi2_get_remote_frame_desc(priv, &fd);
+ if (ret)
+ return ret;
+
+ if (routing->num_routes < fd.num_entries) {
+ routing->num_routes = fd.num_entries;
+ return -ENOSPC;
+ }
+
+ routing->num_routes = fd.num_entries;
+
+ for (i = 0; i < fd.num_entries; i++) {
+ struct v4l2_mbus_frame_desc_entry *entry = &fd.entry[i];
+ int source_pad;
+
+ source_pad = rcsi2_vc_to_pad(entry->bus.csi2.channel);
+ if (source_pad < 0) {
+ dev_err(priv->dev, "Virtual Channel out of range: %u\n",
+ entry->bus.csi2.channel);
+ return -ENOSPC;
+ }
+
+ r->sink_pad = RCAR_CSI2_SINK;
+ r->sink_stream = entry->stream;
+ r->source_pad = source_pad;
+ r->source_stream = 0;
+ r->flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE |
+ V4L2_SUBDEV_ROUTE_FL_IMMUTABLE;
+ r++;
+ }
+
+ return 0;
+}
+
static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = {
.set_fmt = rcsi2_set_pad_format,
.get_fmt = rcsi2_get_pad_format,
+ .get_routing = rcsi2_get_routing,
};
static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = {
--
2.18.0
^ permalink raw reply related [flat|nested] 47+ messages in thread* Re: [PATCH 00/30] v4l: add support for multiplexed streams
2018-08-23 13:25 [PATCH 00/30] v4l: add support for multiplexed streams Niklas Söderlund
@ 2018-08-27 11:50 ` Sakari Ailus
2018-08-23 13:25 ` [PATCH 02/30] media: entity: Use pads instead of entities in the media graph walk stack Niklas Söderlund
` (29 subsequent siblings)
30 siblings, 0 replies; 47+ messages in thread
From: Sakari Ailus @ 2018-08-27 11:50 UTC (permalink / raw)
To: Niklas Söderlund
Cc: Laurent Pinchart, Sakari Ailus, linux-media, linux-renesas-soc
Hejssan!
On Thu, Aug 23, 2018 at 03:25:14PM +0200, Niklas Söderlund wrote:
> Hi all,
>
> This series adds support for multiplexed streams within a media device
> link. The use-case addressed in this series covers CSI-2 Virtual
> Channels on the Renesas R-Car Gen3 platforms. The v4l2 changes have been
> a joint effort between Sakari and Laurent and floating around for some
> time [1].
Thanks for working on driver support for this.
How do you handle streaming on R-Car Gen2 CSI-2 receiver? Do you support
multiple concurrent such streams?
>
> I have added driver support for the devices used on the Renesas Gen3
> platforms, a ADV7482 connected to the R-Car CSI-2 receiver. With these
> changes I can control which of the analog inputs of the ADV7482 the
> video source is captured from and on which CSI-2 virtual channel the
> video is transmitted on to the R-Car CSI-2 receiver.
>
> The series adds two new subdev IOCTLs [GS]_ROUTING which allows
> user-space to get and set routes inside a subdevice. I have added RFC
> support for these to v4l-utils [2] which can be used to test this
> series, example:
>
> Check the internal routing of the adv748x csi-2 transmitter:
> v4l2-ctl -d /dev/v4l-subdev24 --get-routing
> 0/0 -> 1/0 [ENABLED]
> 0/0 -> 1/1 []
> 0/0 -> 1/2 []
> 0/0 -> 1/3 []
>
>
> Select that video should be outputed on VC 2 and check the result:
> $ v4l2-ctl -d /dev/v4l-subdev24 --set-routing '0/0 -> 1/2 [1]'
Do you have the v4l2-ctl changes for routing configuration? I do have
similar changes for media-ctl (as well as libv4l2subdev) but I don't think
I've posted them yet. This patchset doesn't depend on them though.
>
> $ v4l2-ctl -d /dev/v4l-subdev24 --get-routing
> 0/0 -> 1/0 []
> 0/0 -> 1/1 []
> 0/0 -> 1/2 [ENABLED]
> 0/0 -> 1/3 []
>
> This series is tested on R-Car M3-N and for your testing needs this
> series is available at
>
> git://git.ragnatech.se/linux v4l2/mux
>
> Thanks.
>
> 1. git://linuxtv.org/sailus/media_tree.git vc
> 2. git://git.ragnatech.se/v4l-utils routing
>
>
> Laurent Pinchart (4):
> media: entity: Add has_route entity operation
> media: entity: Add media_has_route() function
> media: entity: Use routing information during graph traversal
> v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations
>
> Niklas Söderlund (7):
> adv748x: csi2: add translation from pixelcode to CSI-2 datatype
> adv748x: csi2: only allow formats on sink pads
> adv748x: csi2: describe the multiplexed stream
> adv748x: csi2: add internal routing configuration
> adv748x: afe: add routing support
> rcar-csi2: use frame description information to configure CSI-2 bus
> rcar-csi2: expose the subdevice internal routing
>
> Sakari Ailus (19):
> media: entity: Use pad as a starting point for graph walk
> media: entity: Use pads instead of entities in the media graph walk
> stack
> media: entity: Walk the graph based on pads
> v4l: mc: Start walk from a specific pad in use count calculation
> media: entity: Move the pipeline from entity to pads
> media: entity: Use pad as the starting point for a pipeline
> media: entity: Swap pads if route is checked from source to sink
> media: entity: Skip link validation for pads to which there is no
> route to
> media: entity: Add an iterator helper for connected pads
> media: entity: Add only connected pads to the pipeline
> media: entity: Add debug information in graph walk route check
> media: entity: Look for indirect routes
> v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING
> v4l: subdev: Take routing information into account in link validation
> v4l: subdev: Improve link format validation debug messages
> v4l: mc: Add an S_ROUTING helper function for power state changes
> v4l: Add bus type to frame descriptors
> v4l: Add CSI-2 bus configuration to frame descriptors
> v4l: Add stream to frame descriptor
>
> Documentation/media/kapi/mc-core.rst | 15 +-
> drivers/media/i2c/adv748x/adv748x-afe.c | 65 ++++
> drivers/media/i2c/adv748x/adv748x-csi2.c | 124 +++++++-
> drivers/media/i2c/adv748x/adv748x.h | 1 +
> drivers/media/media-entity.c | 252 ++++++++++------
> drivers/media/pci/intel/ipu3/ipu3-cio2.c | 6 +-
> .../media/platform/exynos4-is/fimc-capture.c | 8 +-
> .../platform/exynos4-is/fimc-isp-video.c | 8 +-
> drivers/media/platform/exynos4-is/fimc-isp.c | 2 +-
> drivers/media/platform/exynos4-is/fimc-lite.c | 10 +-
> drivers/media/platform/exynos4-is/media-dev.c | 20 +-
> drivers/media/platform/omap3isp/isp.c | 2 +-
> drivers/media/platform/omap3isp/ispvideo.c | 25 +-
> drivers/media/platform/omap3isp/ispvideo.h | 2 +-
> .../media/platform/qcom/camss/camss-video.c | 6 +-
> drivers/media/platform/rcar-vin/rcar-csi2.c | 188 +++++++++---
> drivers/media/platform/rcar-vin/rcar-dma.c | 8 +-
> .../media/platform/s3c-camif/camif-capture.c | 6 +-
> drivers/media/platform/vimc/vimc-capture.c | 6 +-
> drivers/media/platform/vsp1/vsp1_video.c | 18 +-
> drivers/media/platform/xilinx/xilinx-dma.c | 20 +-
> drivers/media/platform/xilinx/xilinx-dma.h | 2 +-
> drivers/media/usb/au0828/au0828-core.c | 4 +-
> drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 75 +++++
> drivers/media/v4l2-core/v4l2-ioctl.c | 20 +-
> drivers/media/v4l2-core/v4l2-mc.c | 76 +++--
> drivers/media/v4l2-core/v4l2-subdev.c | 285 ++++++++++++++++--
> .../staging/media/davinci_vpfe/vpfe_video.c | 47 +--
> drivers/staging/media/imx/imx-media-utils.c | 8 +-
> drivers/staging/media/omap4iss/iss.c | 2 +-
> drivers/staging/media/omap4iss/iss_video.c | 38 +--
> drivers/staging/media/omap4iss/iss_video.h | 2 +-
> include/media/media-entity.h | 122 +++++---
> include/media/v4l2-mc.h | 22 ++
> include/media/v4l2-subdev.h | 34 +++
> include/uapi/linux/v4l2-subdev.h | 40 +++
> 36 files changed, 1239 insertions(+), 330 deletions(-)
>
--
Trevliga hälsningar,
Sakari Ailus
e-mail: sakari.ailus@iki.fi
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH 00/30] v4l: add support for multiplexed streams
@ 2018-08-27 11:50 ` Sakari Ailus
0 siblings, 0 replies; 47+ messages in thread
From: Sakari Ailus @ 2018-08-27 11:50 UTC (permalink / raw)
To: Niklas Söderlund
Cc: Laurent Pinchart, Sakari Ailus, linux-media, linux-renesas-soc
Hejssan!
On Thu, Aug 23, 2018 at 03:25:14PM +0200, Niklas S�derlund wrote:
> Hi all,
>
> This series adds support for multiplexed streams within a media device
> link. The use-case addressed in this series covers CSI-2 Virtual
> Channels on the Renesas R-Car Gen3 platforms. The v4l2 changes have been
> a joint effort between Sakari and Laurent and floating around for some
> time [1].
Thanks for working on driver support for this.
How do you handle streaming on R-Car Gen2 CSI-2 receiver? Do you support
multiple concurrent such streams?
>
> I have added driver support for the devices used on the Renesas Gen3
> platforms, a ADV7482 connected to the R-Car CSI-2 receiver. With these
> changes I can control which of the analog inputs of the ADV7482 the
> video source is captured from and on which CSI-2 virtual channel the
> video is transmitted on to the R-Car CSI-2 receiver.
>
> The series adds two new subdev IOCTLs [GS]_ROUTING which allows
> user-space to get and set routes inside a subdevice. I have added RFC
> support for these to v4l-utils [2] which can be used to test this
> series, example:
>
> Check the internal routing of the adv748x csi-2 transmitter:
> v4l2-ctl -d /dev/v4l-subdev24 --get-routing
> 0/0 -> 1/0 [ENABLED]
> 0/0 -> 1/1 []
> 0/0 -> 1/2 []
> 0/0 -> 1/3 []
>
>
> Select that video should be outputed on VC 2 and check the result:
> $ v4l2-ctl -d /dev/v4l-subdev24 --set-routing '0/0 -> 1/2 [1]'
Do you have the v4l2-ctl changes for routing configuration? I do have
similar changes for media-ctl (as well as libv4l2subdev) but I don't think
I've posted them yet. This patchset doesn't depend on them though.
>
> $ v4l2-ctl -d /dev/v4l-subdev24 --get-routing
> 0/0 -> 1/0 []
> 0/0 -> 1/1 []
> 0/0 -> 1/2 [ENABLED]
> 0/0 -> 1/3 []
>
> This series is tested on R-Car M3-N and for your testing needs this
> series is available at
>
> git://git.ragnatech.se/linux v4l2/mux
>
> Thanks.
>
> 1. git://linuxtv.org/sailus/media_tree.git vc
> 2. git://git.ragnatech.se/v4l-utils routing
>
>
> Laurent Pinchart (4):
> media: entity: Add has_route entity operation
> media: entity: Add media_has_route() function
> media: entity: Use routing information during graph traversal
> v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations
>
> Niklas S�derlund (7):
> adv748x: csi2: add translation from pixelcode to CSI-2 datatype
> adv748x: csi2: only allow formats on sink pads
> adv748x: csi2: describe the multiplexed stream
> adv748x: csi2: add internal routing configuration
> adv748x: afe: add routing support
> rcar-csi2: use frame description information to configure CSI-2 bus
> rcar-csi2: expose the subdevice internal routing
>
> Sakari Ailus (19):
> media: entity: Use pad as a starting point for graph walk
> media: entity: Use pads instead of entities in the media graph walk
> stack
> media: entity: Walk the graph based on pads
> v4l: mc: Start walk from a specific pad in use count calculation
> media: entity: Move the pipeline from entity to pads
> media: entity: Use pad as the starting point for a pipeline
> media: entity: Swap pads if route is checked from source to sink
> media: entity: Skip link validation for pads to which there is no
> route to
> media: entity: Add an iterator helper for connected pads
> media: entity: Add only connected pads to the pipeline
> media: entity: Add debug information in graph walk route check
> media: entity: Look for indirect routes
> v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING
> v4l: subdev: Take routing information into account in link validation
> v4l: subdev: Improve link format validation debug messages
> v4l: mc: Add an S_ROUTING helper function for power state changes
> v4l: Add bus type to frame descriptors
> v4l: Add CSI-2 bus configuration to frame descriptors
> v4l: Add stream to frame descriptor
>
> Documentation/media/kapi/mc-core.rst | 15 +-
> drivers/media/i2c/adv748x/adv748x-afe.c | 65 ++++
> drivers/media/i2c/adv748x/adv748x-csi2.c | 124 +++++++-
> drivers/media/i2c/adv748x/adv748x.h | 1 +
> drivers/media/media-entity.c | 252 ++++++++++------
> drivers/media/pci/intel/ipu3/ipu3-cio2.c | 6 +-
> .../media/platform/exynos4-is/fimc-capture.c | 8 +-
> .../platform/exynos4-is/fimc-isp-video.c | 8 +-
> drivers/media/platform/exynos4-is/fimc-isp.c | 2 +-
> drivers/media/platform/exynos4-is/fimc-lite.c | 10 +-
> drivers/media/platform/exynos4-is/media-dev.c | 20 +-
> drivers/media/platform/omap3isp/isp.c | 2 +-
> drivers/media/platform/omap3isp/ispvideo.c | 25 +-
> drivers/media/platform/omap3isp/ispvideo.h | 2 +-
> .../media/platform/qcom/camss/camss-video.c | 6 +-
> drivers/media/platform/rcar-vin/rcar-csi2.c | 188 +++++++++---
> drivers/media/platform/rcar-vin/rcar-dma.c | 8 +-
> .../media/platform/s3c-camif/camif-capture.c | 6 +-
> drivers/media/platform/vimc/vimc-capture.c | 6 +-
> drivers/media/platform/vsp1/vsp1_video.c | 18 +-
> drivers/media/platform/xilinx/xilinx-dma.c | 20 +-
> drivers/media/platform/xilinx/xilinx-dma.h | 2 +-
> drivers/media/usb/au0828/au0828-core.c | 4 +-
> drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 75 +++++
> drivers/media/v4l2-core/v4l2-ioctl.c | 20 +-
> drivers/media/v4l2-core/v4l2-mc.c | 76 +++--
> drivers/media/v4l2-core/v4l2-subdev.c | 285 ++++++++++++++++--
> .../staging/media/davinci_vpfe/vpfe_video.c | 47 +--
> drivers/staging/media/imx/imx-media-utils.c | 8 +-
> drivers/staging/media/omap4iss/iss.c | 2 +-
> drivers/staging/media/omap4iss/iss_video.c | 38 +--
> drivers/staging/media/omap4iss/iss_video.h | 2 +-
> include/media/media-entity.h | 122 +++++---
> include/media/v4l2-mc.h | 22 ++
> include/media/v4l2-subdev.h | 34 +++
> include/uapi/linux/v4l2-subdev.h | 40 +++
> 36 files changed, 1239 insertions(+), 330 deletions(-)
>
--
Trevliga h�lsningar,
Sakari Ailus
e-mail: sakari.ailus@iki.fi
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 00/30] v4l: add support for multiplexed streams
2018-08-27 11:50 ` Sakari Ailus
@ 2018-08-27 13:11 ` Niklas Söderlund
-1 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-27 13:11 UTC (permalink / raw)
To: Sakari Ailus
Cc: Laurent Pinchart, Sakari Ailus, linux-media, linux-renesas-soc
Hej Sakari,
Thanks for your comments,
On 2018-08-27 14:50:10 +0300, Sakari Ailus wrote:
> Hejssan!
>
> On Thu, Aug 23, 2018 at 03:25:14PM +0200, Niklas Söderlund wrote:
> > Hi all,
> >
> > This series adds support for multiplexed streams within a media device
> > link. The use-case addressed in this series covers CSI-2 Virtual
> > Channels on the Renesas R-Car Gen3 platforms. The v4l2 changes have been
> > a joint effort between Sakari and Laurent and floating around for some
> > time [1].
>
> Thanks for working on driver support for this.
>
> How do you handle streaming on R-Car Gen2 CSI-2 receiver? Do you support
> multiple concurrent such streams?
s/Gen2/Gen3/ :-)
This series framework changes and driver changes to rcar-csi2
supports multiple concurrent streams. However the example implementation
here uses the adv7482 as a video source which only provides one
concurrent stream.
However there is another more complex use-case using GMSL and max9286
deserializes and max9272 serializers which supports streaming on all 4
CSI-2 virtual channels. There are prototype drivers which are posted
publicly which demonstrates this but as they are less mature and much
more complex then the adv7482 use-case they are not included in this
series. It is however tested and works to stream 1-4 channels
concurrently using the framework changes from this series.
>
> >
> > I have added driver support for the devices used on the Renesas Gen3
> > platforms, a ADV7482 connected to the R-Car CSI-2 receiver. With these
> > changes I can control which of the analog inputs of the ADV7482 the
> > video source is captured from and on which CSI-2 virtual channel the
> > video is transmitted on to the R-Car CSI-2 receiver.
> >
> > The series adds two new subdev IOCTLs [GS]_ROUTING which allows
> > user-space to get and set routes inside a subdevice. I have added RFC
> > support for these to v4l-utils [2] which can be used to test this
> > series, example:
> >
> > Check the internal routing of the adv748x csi-2 transmitter:
> > v4l2-ctl -d /dev/v4l-subdev24 --get-routing
> > 0/0 -> 1/0 [ENABLED]
> > 0/0 -> 1/1 []
> > 0/0 -> 1/2 []
> > 0/0 -> 1/3 []
> >
> >
> > Select that video should be outputed on VC 2 and check the result:
> > $ v4l2-ctl -d /dev/v4l-subdev24 --set-routing '0/0 -> 1/2 [1]'
>
> Do you have the v4l2-ctl changes for routing configuration? I do have
> similar changes for media-ctl (as well as libv4l2subdev) but I don't think
> I've posted them yet. This patchset doesn't depend on them though.
Yes the RFC changes I made to be able to use v4l2-ctl as show above are
available at:
git://git.ragnatech.se/v4l-utils routing
>
> >
> > $ v4l2-ctl -d /dev/v4l-subdev24 --get-routing
> > 0/0 -> 1/0 []
> > 0/0 -> 1/1 []
> > 0/0 -> 1/2 [ENABLED]
> > 0/0 -> 1/3 []
> >
> > This series is tested on R-Car M3-N and for your testing needs this
> > series is available at
> >
> > git://git.ragnatech.se/linux v4l2/mux
> >
> > Thanks.
> >
> > 1. git://linuxtv.org/sailus/media_tree.git vc
> > 2. git://git.ragnatech.se/v4l-utils routing
> >
> >
> > Laurent Pinchart (4):
> > media: entity: Add has_route entity operation
> > media: entity: Add media_has_route() function
> > media: entity: Use routing information during graph traversal
> > v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations
> >
> > Niklas Söderlund (7):
> > adv748x: csi2: add translation from pixelcode to CSI-2 datatype
> > adv748x: csi2: only allow formats on sink pads
> > adv748x: csi2: describe the multiplexed stream
> > adv748x: csi2: add internal routing configuration
> > adv748x: afe: add routing support
> > rcar-csi2: use frame description information to configure CSI-2 bus
> > rcar-csi2: expose the subdevice internal routing
> >
> > Sakari Ailus (19):
> > media: entity: Use pad as a starting point for graph walk
> > media: entity: Use pads instead of entities in the media graph walk
> > stack
> > media: entity: Walk the graph based on pads
> > v4l: mc: Start walk from a specific pad in use count calculation
> > media: entity: Move the pipeline from entity to pads
> > media: entity: Use pad as the starting point for a pipeline
> > media: entity: Swap pads if route is checked from source to sink
> > media: entity: Skip link validation for pads to which there is no
> > route to
> > media: entity: Add an iterator helper for connected pads
> > media: entity: Add only connected pads to the pipeline
> > media: entity: Add debug information in graph walk route check
> > media: entity: Look for indirect routes
> > v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING
> > v4l: subdev: Take routing information into account in link validation
> > v4l: subdev: Improve link format validation debug messages
> > v4l: mc: Add an S_ROUTING helper function for power state changes
> > v4l: Add bus type to frame descriptors
> > v4l: Add CSI-2 bus configuration to frame descriptors
> > v4l: Add stream to frame descriptor
> >
> > Documentation/media/kapi/mc-core.rst | 15 +-
> > drivers/media/i2c/adv748x/adv748x-afe.c | 65 ++++
> > drivers/media/i2c/adv748x/adv748x-csi2.c | 124 +++++++-
> > drivers/media/i2c/adv748x/adv748x.h | 1 +
> > drivers/media/media-entity.c | 252 ++++++++++------
> > drivers/media/pci/intel/ipu3/ipu3-cio2.c | 6 +-
> > .../media/platform/exynos4-is/fimc-capture.c | 8 +-
> > .../platform/exynos4-is/fimc-isp-video.c | 8 +-
> > drivers/media/platform/exynos4-is/fimc-isp.c | 2 +-
> > drivers/media/platform/exynos4-is/fimc-lite.c | 10 +-
> > drivers/media/platform/exynos4-is/media-dev.c | 20 +-
> > drivers/media/platform/omap3isp/isp.c | 2 +-
> > drivers/media/platform/omap3isp/ispvideo.c | 25 +-
> > drivers/media/platform/omap3isp/ispvideo.h | 2 +-
> > .../media/platform/qcom/camss/camss-video.c | 6 +-
> > drivers/media/platform/rcar-vin/rcar-csi2.c | 188 +++++++++---
> > drivers/media/platform/rcar-vin/rcar-dma.c | 8 +-
> > .../media/platform/s3c-camif/camif-capture.c | 6 +-
> > drivers/media/platform/vimc/vimc-capture.c | 6 +-
> > drivers/media/platform/vsp1/vsp1_video.c | 18 +-
> > drivers/media/platform/xilinx/xilinx-dma.c | 20 +-
> > drivers/media/platform/xilinx/xilinx-dma.h | 2 +-
> > drivers/media/usb/au0828/au0828-core.c | 4 +-
> > drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 75 +++++
> > drivers/media/v4l2-core/v4l2-ioctl.c | 20 +-
> > drivers/media/v4l2-core/v4l2-mc.c | 76 +++--
> > drivers/media/v4l2-core/v4l2-subdev.c | 285 ++++++++++++++++--
> > .../staging/media/davinci_vpfe/vpfe_video.c | 47 +--
> > drivers/staging/media/imx/imx-media-utils.c | 8 +-
> > drivers/staging/media/omap4iss/iss.c | 2 +-
> > drivers/staging/media/omap4iss/iss_video.c | 38 +--
> > drivers/staging/media/omap4iss/iss_video.h | 2 +-
> > include/media/media-entity.h | 122 +++++---
> > include/media/v4l2-mc.h | 22 ++
> > include/media/v4l2-subdev.h | 34 +++
> > include/uapi/linux/v4l2-subdev.h | 40 +++
> > 36 files changed, 1239 insertions(+), 330 deletions(-)
> >
>
> --
> Trevliga hälsningar,
>
> Sakari Ailus
> e-mail: sakari.ailus@iki.fi
--
Regards,
Niklas Söderlund
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [PATCH 00/30] v4l: add support for multiplexed streams
@ 2018-08-27 13:11 ` Niklas Söderlund
0 siblings, 0 replies; 47+ messages in thread
From: Niklas Söderlund @ 2018-08-27 13:11 UTC (permalink / raw)
To: Sakari Ailus
Cc: Laurent Pinchart, Sakari Ailus, linux-media, linux-renesas-soc
Hej Sakari,
Thanks for your comments,
On 2018-08-27 14:50:10 +0300, Sakari Ailus wrote:
> Hejssan!
>
> On Thu, Aug 23, 2018 at 03:25:14PM +0200, Niklas S�derlund wrote:
> > Hi all,
> >
> > This series adds support for multiplexed streams within a media device
> > link. The use-case addressed in this series covers CSI-2 Virtual
> > Channels on the Renesas R-Car Gen3 platforms. The v4l2 changes have been
> > a joint effort between Sakari and Laurent and floating around for some
> > time [1].
>
> Thanks for working on driver support for this.
>
> How do you handle streaming on R-Car Gen2 CSI-2 receiver? Do you support
> multiple concurrent such streams?
s/Gen2/Gen3/ :-)
This series framework changes and driver changes to rcar-csi2
supports multiple concurrent streams. However the example implementation
here uses the adv7482 as a video source which only provides one
concurrent stream.
However there is another more complex use-case using GMSL and max9286
deserializes and max9272 serializers which supports streaming on all 4
CSI-2 virtual channels. There are prototype drivers which are posted
publicly which demonstrates this but as they are less mature and much
more complex then the adv7482 use-case they are not included in this
series. It is however tested and works to stream 1-4 channels
concurrently using the framework changes from this series.
>
> >
> > I have added driver support for the devices used on the Renesas Gen3
> > platforms, a ADV7482 connected to the R-Car CSI-2 receiver. With these
> > changes I can control which of the analog inputs of the ADV7482 the
> > video source is captured from and on which CSI-2 virtual channel the
> > video is transmitted on to the R-Car CSI-2 receiver.
> >
> > The series adds two new subdev IOCTLs [GS]_ROUTING which allows
> > user-space to get and set routes inside a subdevice. I have added RFC
> > support for these to v4l-utils [2] which can be used to test this
> > series, example:
> >
> > Check the internal routing of the adv748x csi-2 transmitter:
> > v4l2-ctl -d /dev/v4l-subdev24 --get-routing
> > 0/0 -> 1/0 [ENABLED]
> > 0/0 -> 1/1 []
> > 0/0 -> 1/2 []
> > 0/0 -> 1/3 []
> >
> >
> > Select that video should be outputed on VC 2 and check the result:
> > $ v4l2-ctl -d /dev/v4l-subdev24 --set-routing '0/0 -> 1/2 [1]'
>
> Do you have the v4l2-ctl changes for routing configuration? I do have
> similar changes for media-ctl (as well as libv4l2subdev) but I don't think
> I've posted them yet. This patchset doesn't depend on them though.
Yes the RFC changes I made to be able to use v4l2-ctl as show above are
available at:
git://git.ragnatech.se/v4l-utils routing
>
> >
> > $ v4l2-ctl -d /dev/v4l-subdev24 --get-routing
> > 0/0 -> 1/0 []
> > 0/0 -> 1/1 []
> > 0/0 -> 1/2 [ENABLED]
> > 0/0 -> 1/3 []
> >
> > This series is tested on R-Car M3-N and for your testing needs this
> > series is available at
> >
> > git://git.ragnatech.se/linux v4l2/mux
> >
> > Thanks.
> >
> > 1. git://linuxtv.org/sailus/media_tree.git vc
> > 2. git://git.ragnatech.se/v4l-utils routing
> >
> >
> > Laurent Pinchart (4):
> > media: entity: Add has_route entity operation
> > media: entity: Add media_has_route() function
> > media: entity: Use routing information during graph traversal
> > v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations
> >
> > Niklas S�derlund (7):
> > adv748x: csi2: add translation from pixelcode to CSI-2 datatype
> > adv748x: csi2: only allow formats on sink pads
> > adv748x: csi2: describe the multiplexed stream
> > adv748x: csi2: add internal routing configuration
> > adv748x: afe: add routing support
> > rcar-csi2: use frame description information to configure CSI-2 bus
> > rcar-csi2: expose the subdevice internal routing
> >
> > Sakari Ailus (19):
> > media: entity: Use pad as a starting point for graph walk
> > media: entity: Use pads instead of entities in the media graph walk
> > stack
> > media: entity: Walk the graph based on pads
> > v4l: mc: Start walk from a specific pad in use count calculation
> > media: entity: Move the pipeline from entity to pads
> > media: entity: Use pad as the starting point for a pipeline
> > media: entity: Swap pads if route is checked from source to sink
> > media: entity: Skip link validation for pads to which there is no
> > route to
> > media: entity: Add an iterator helper for connected pads
> > media: entity: Add only connected pads to the pipeline
> > media: entity: Add debug information in graph walk route check
> > media: entity: Look for indirect routes
> > v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING
> > v4l: subdev: Take routing information into account in link validation
> > v4l: subdev: Improve link format validation debug messages
> > v4l: mc: Add an S_ROUTING helper function for power state changes
> > v4l: Add bus type to frame descriptors
> > v4l: Add CSI-2 bus configuration to frame descriptors
> > v4l: Add stream to frame descriptor
> >
> > Documentation/media/kapi/mc-core.rst | 15 +-
> > drivers/media/i2c/adv748x/adv748x-afe.c | 65 ++++
> > drivers/media/i2c/adv748x/adv748x-csi2.c | 124 +++++++-
> > drivers/media/i2c/adv748x/adv748x.h | 1 +
> > drivers/media/media-entity.c | 252 ++++++++++------
> > drivers/media/pci/intel/ipu3/ipu3-cio2.c | 6 +-
> > .../media/platform/exynos4-is/fimc-capture.c | 8 +-
> > .../platform/exynos4-is/fimc-isp-video.c | 8 +-
> > drivers/media/platform/exynos4-is/fimc-isp.c | 2 +-
> > drivers/media/platform/exynos4-is/fimc-lite.c | 10 +-
> > drivers/media/platform/exynos4-is/media-dev.c | 20 +-
> > drivers/media/platform/omap3isp/isp.c | 2 +-
> > drivers/media/platform/omap3isp/ispvideo.c | 25 +-
> > drivers/media/platform/omap3isp/ispvideo.h | 2 +-
> > .../media/platform/qcom/camss/camss-video.c | 6 +-
> > drivers/media/platform/rcar-vin/rcar-csi2.c | 188 +++++++++---
> > drivers/media/platform/rcar-vin/rcar-dma.c | 8 +-
> > .../media/platform/s3c-camif/camif-capture.c | 6 +-
> > drivers/media/platform/vimc/vimc-capture.c | 6 +-
> > drivers/media/platform/vsp1/vsp1_video.c | 18 +-
> > drivers/media/platform/xilinx/xilinx-dma.c | 20 +-
> > drivers/media/platform/xilinx/xilinx-dma.h | 2 +-
> > drivers/media/usb/au0828/au0828-core.c | 4 +-
> > drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 75 +++++
> > drivers/media/v4l2-core/v4l2-ioctl.c | 20 +-
> > drivers/media/v4l2-core/v4l2-mc.c | 76 +++--
> > drivers/media/v4l2-core/v4l2-subdev.c | 285 ++++++++++++++++--
> > .../staging/media/davinci_vpfe/vpfe_video.c | 47 +--
> > drivers/staging/media/imx/imx-media-utils.c | 8 +-
> > drivers/staging/media/omap4iss/iss.c | 2 +-
> > drivers/staging/media/omap4iss/iss_video.c | 38 +--
> > drivers/staging/media/omap4iss/iss_video.h | 2 +-
> > include/media/media-entity.h | 122 +++++---
> > include/media/v4l2-mc.h | 22 ++
> > include/media/v4l2-subdev.h | 34 +++
> > include/uapi/linux/v4l2-subdev.h | 40 +++
> > 36 files changed, 1239 insertions(+), 330 deletions(-)
> >
>
> --
> Trevliga h�lsningar,
>
> Sakari Ailus
> e-mail: sakari.ailus@iki.fi
--
Regards,
Niklas S�derlund
^ permalink raw reply [flat|nested] 47+ messages in thread