* [PATCH v7 RESEND 1/2] ARM: dts: at91: sama5d2: add channel cells for ADC device
@ 2018-08-27 13:57 ` Eugen Hristev
0 siblings, 0 replies; 8+ messages in thread
From: Eugen Hristev @ 2018-08-27 13:57 UTC (permalink / raw)
To: ludovic.desroches, alexandre.belloni, linux-arm-kernel,
linux-kernel, linux-iio, linux-input, nicolas.ferre
Cc: Eugen Hristev
Preparing the ADC device to connect channel consumer drivers
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Resending after merge window that includes the bindings was closed.
Rebased on 4.19-rc1 : no changes
arch/arm/boot/dts/sama5d2.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5..f06ba99 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
/ {
model = "Atmel SAMA5D2 family SoC";
@@ -1437,6 +1438,7 @@
atmel,max-sample-rate-hz = <20000000>;
atmel,startup-time-ms = <4>;
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+ #io-channel-cells = <1>;
status = "disabled";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v7 RESEND 1/2] ARM: dts: at91: sama5d2: add channel cells for ADC device
@ 2018-08-27 13:57 ` Eugen Hristev
0 siblings, 0 replies; 8+ messages in thread
From: Eugen Hristev @ 2018-08-27 13:57 UTC (permalink / raw)
To: ludovic.desroches, alexandre.belloni, linux-arm-kernel,
linux-kernel, linux-iio, linux-input, nicolas.ferre
Cc: Eugen Hristev
Preparing the ADC device to connect channel consumer drivers
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Resending after merge window that includes the bindings was closed.
Rebased on 4.19-rc1 : no changes
arch/arm/boot/dts/sama5d2.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5..f06ba99 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
/ {
model = "Atmel SAMA5D2 family SoC";
@@ -1437,6 +1438,7 @@
atmel,max-sample-rate-hz = <20000000>;
atmel,startup-time-ms = <4>;
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+ #io-channel-cells = <1>;
status = "disabled";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v7 RESEND 1/2] ARM: dts: at91: sama5d2: add channel cells for ADC device
@ 2018-08-27 13:57 ` Eugen Hristev
0 siblings, 0 replies; 8+ messages in thread
From: Eugen Hristev @ 2018-08-27 13:57 UTC (permalink / raw)
To: linux-arm-kernel
Preparing the ADC device to connect channel consumer drivers
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Resending after merge window that includes the bindings was closed.
Rebased on 4.19-rc1 : no changes
arch/arm/boot/dts/sama5d2.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5..f06ba99 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
/ {
model = "Atmel SAMA5D2 family SoC";
@@ -1437,6 +1438,7 @@
atmel,max-sample-rate-hz = <20000000>;
atmel,startup-time-ms = <4>;
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+ #io-channel-cells = <1>;
status = "disabled";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v7 RESEND 2/2] ARM: dts: at91: sama5d2: Add resistive touch device
2018-08-27 13:57 ` Eugen Hristev
(?)
@ 2018-08-27 13:57 ` Eugen Hristev
-1 siblings, 0 replies; 8+ messages in thread
From: Eugen Hristev @ 2018-08-27 13:57 UTC (permalink / raw)
To: ludovic.desroches, alexandre.belloni, linux-arm-kernel,
linux-kernel, linux-iio, linux-input, nicolas.ferre
Cc: Eugen Hristev
Add generic resistive touch device which is connected to ADC block
inside the SAMA5D2 SoC
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Resending after merge window that includes the bindings was closed.
Rebased on 4.19-rc1 : no changes
arch/arm/boot/dts/sama5d2.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index f06ba99..a44f325 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1442,6 +1442,16 @@
status = "disabled";
};
+ resistive_touch: resistive-touch {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+ io-channel-names = "x", "y", "pressure";
+ touchscreen-min-pressure = <50000>;
+ status = "disabled";
+ };
+
pioA: pinctrl@fc038000 {
compatible = "atmel,sama5d2-pinctrl";
reg = <0xfc038000 0x600>;
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v7 RESEND 2/2] ARM: dts: at91: sama5d2: Add resistive touch device
@ 2018-08-27 13:57 ` Eugen Hristev
0 siblings, 0 replies; 8+ messages in thread
From: Eugen Hristev @ 2018-08-27 13:57 UTC (permalink / raw)
To: ludovic.desroches, alexandre.belloni, linux-arm-kernel,
linux-kernel, linux-iio, linux-input, nicolas.ferre
Cc: Eugen Hristev
Add generic resistive touch device which is connected to ADC block
inside the SAMA5D2 SoC
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Resending after merge window that includes the bindings was closed.
Rebased on 4.19-rc1 : no changes
arch/arm/boot/dts/sama5d2.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index f06ba99..a44f325 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1442,6 +1442,16 @@
status = "disabled";
};
+ resistive_touch: resistive-touch {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+ io-channel-names = "x", "y", "pressure";
+ touchscreen-min-pressure = <50000>;
+ status = "disabled";
+ };
+
pioA: pinctrl@fc038000 {
compatible = "atmel,sama5d2-pinctrl";
reg = <0xfc038000 0x600>;
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v7 RESEND 2/2] ARM: dts: at91: sama5d2: Add resistive touch device
@ 2018-08-27 13:57 ` Eugen Hristev
0 siblings, 0 replies; 8+ messages in thread
From: Eugen Hristev @ 2018-08-27 13:57 UTC (permalink / raw)
To: linux-arm-kernel
Add generic resistive touch device which is connected to ADC block
inside the SAMA5D2 SoC
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Resending after merge window that includes the bindings was closed.
Rebased on 4.19-rc1 : no changes
arch/arm/boot/dts/sama5d2.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index f06ba99..a44f325 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1442,6 +1442,16 @@
status = "disabled";
};
+ resistive_touch: resistive-touch {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+ io-channel-names = "x", "y", "pressure";
+ touchscreen-min-pressure = <50000>;
+ status = "disabled";
+ };
+
pioA: pinctrl at fc038000 {
compatible = "atmel,sama5d2-pinctrl";
reg = <0xfc038000 0x600>;
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v7 RESEND 1/2] ARM: dts: at91: sama5d2: add channel cells for ADC device
2018-08-27 13:57 ` Eugen Hristev
@ 2018-08-27 14:36 ` Alexandre Belloni
-1 siblings, 0 replies; 8+ messages in thread
From: Alexandre Belloni @ 2018-08-27 14:36 UTC (permalink / raw)
To: Eugen Hristev
Cc: ludovic.desroches, linux-arm-kernel, linux-kernel, linux-iio,
linux-input, nicolas.ferre
On 27/08/2018 16:57:12+0300, Eugen Hristev wrote:
> Preparing the ADC device to connect channel consumer drivers
>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
> Resending after merge window that includes the bindings was closed.
> Rebased on 4.19-rc1 : no changes
>
> arch/arm/boot/dts/sama5d2.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
I was going to dig those up, applied now, thanks!
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index 61f68e5..f06ba99 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -47,6 +47,7 @@
> #include <dt-bindings/dma/at91.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/clock/at91.h>
> +#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
>
> / {
> model = "Atmel SAMA5D2 family SoC";
> @@ -1437,6 +1438,7 @@
> atmel,max-sample-rate-hz = <20000000>;
> atmel,startup-time-ms = <4>;
> atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
> + #io-channel-cells = <1>;
> status = "disabled";
> };
>
> --
> 2.7.4
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v7 RESEND 1/2] ARM: dts: at91: sama5d2: add channel cells for ADC device
@ 2018-08-27 14:36 ` Alexandre Belloni
0 siblings, 0 replies; 8+ messages in thread
From: Alexandre Belloni @ 2018-08-27 14:36 UTC (permalink / raw)
To: linux-arm-kernel
On 27/08/2018 16:57:12+0300, Eugen Hristev wrote:
> Preparing the ADC device to connect channel consumer drivers
>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
> Resending after merge window that includes the bindings was closed.
> Rebased on 4.19-rc1 : no changes
>
> arch/arm/boot/dts/sama5d2.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
I was going to dig those up, applied now, thanks!
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index 61f68e5..f06ba99 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -47,6 +47,7 @@
> #include <dt-bindings/dma/at91.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/clock/at91.h>
> +#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
>
> / {
> model = "Atmel SAMA5D2 family SoC";
> @@ -1437,6 +1438,7 @@
> atmel,max-sample-rate-hz = <20000000>;
> atmel,startup-time-ms = <4>;
> atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
> + #io-channel-cells = <1>;
> status = "disabled";
> };
>
> --
> 2.7.4
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-08-27 14:37 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-08-27 13:57 [PATCH v7 RESEND 1/2] ARM: dts: at91: sama5d2: add channel cells for ADC device Eugen Hristev
2018-08-27 13:57 ` Eugen Hristev
2018-08-27 13:57 ` Eugen Hristev
2018-08-27 13:57 ` [PATCH v7 RESEND 2/2] ARM: dts: at91: sama5d2: Add resistive touch device Eugen Hristev
2018-08-27 13:57 ` Eugen Hristev
2018-08-27 13:57 ` Eugen Hristev
2018-08-27 14:36 ` [PATCH v7 RESEND 1/2] ARM: dts: at91: sama5d2: add channel cells for ADC device Alexandre Belloni
2018-08-27 14:36 ` Alexandre Belloni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.