[v2,09/10] platform: x86: intel_cht_int33fe: Remove the old connections for the muxes

[v2,09/10] platform: x86: intel_cht_int33fe: Remove the old connections for the muxes

[Heikki Krogerus]

USB Type-C class driver now expects the muxes to be always
assigned to the ports and not controllers, so the
connections for the mux and fusb302 can be removed.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
 drivers/platform/x86/intel_cht_int33fe.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index eb0dd687ee54..05826e3e9037 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -174,23 +174,16 @@ static int cht_int33fe_probe(struct i2c_client *client)
 			return -EPROBE_DEFER; /* Wait for i2c-adapter to load */
 	}
 
-	data->connections[0].endpoint[0] = "i2c-fusb302";
+	data->connections[0].endpoint[0] = "port0";
 	data->connections[0].endpoint[1] = "i2c-pi3usb30532";
 	data->connections[0].id = "typec-switch";
-	data->connections[1].endpoint[0] = "i2c-fusb302";
+	data->connections[1].endpoint[0] = "port0";
 	data->connections[1].endpoint[1] = "i2c-pi3usb30532";
 	data->connections[1].id = "idff01m01";
 	data->connections[2].endpoint[0] = "i2c-fusb302";
 	data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
 	data->connections[2].id = "usb-role-switch";
 
-	data->connections[3].endpoint[0] = "port0";
-	data->connections[3].endpoint[1] = "i2c-pi3usb30532";
-	data->connections[3].id = "typec-switch";
-	data->connections[4].endpoint[0] = "port0";
-	data->connections[4].endpoint[1] = "i2c-pi3usb30532";
-	data->connections[4].id = "idff01m01";
-
 	device_connections_add(data->connections);
 
 	memset(&board_info, 0, sizeof(board_info));